Arun Raghavan [Mon, 27 May 2013 08:57:42 +0000 (14:27 +0530)]
tests: Make loopback latency test more accurate
This makes sure that we always take the timing at the point when we
write out the pulse, making the overall latency measurement more
accurate.
Arun Raghavan [Thu, 23 May 2013 09:57:40 +0000 (15:27 +0530)]
tests: Factor out loopback setup code
This moves over setup code for the loopback latency test into a private
library so that we can easily write more tests using the same framework.
Arun Raghavan [Wed, 22 May 2013 10:29:24 +0000 (15:59 +0530)]
tests: Adjust latency test calibration
This makes the test more robust by:
1. Decreasing the '1' threshold during calibration - the RMS value for
the sine wave will be 0.5, so the previous code was making us take
the ALSA mixer past 0dB.
2. Using the difference rather than absolute value for 0->1 transitions,
so that we're somewhat independent noise in our calculations.
Arun Raghavan [Wed, 22 May 2013 06:33:47 +0000 (12:03 +0530)]
tests: Make loopback latency test run with rt priority
Arun Raghavan [Tue, 21 May 2013 13:09:30 +0000 (18:39 +0530)]
tests: Add a latency measurement test
This test is intended to measure real latency by playing a sample to a
sink and capturing that over a loopback interface. The loopback can
either be physical (cable running from headphone out to line in) or
virtual (monitor source or module loopback).
Also included in this is calibration code to make sure that volumes are
sufficiently adjusted to be able to detect the played back signal (and
that there aren't false positives due to line noise).
One of the objectives of all this is to later factor out the setup code
to allow us to easily write more loopback tests for various
functionality (volumes, resampling, mixing, etc.).
Tanu Kaskinen [Fri, 24 May 2013 12:17:13 +0000 (15:17 +0300)]
bluetooth: Fix input port description
Arun Raghavan [Wed, 15 May 2013 04:11:19 +0000 (09:41 +0530)]
zeroconf: Make Avahi usage in m-z-publish async
This pushes all avahi-client code to a threaded mainloop from the PA
mainloop context. We need to do this because avahi-client makes blocking
D-Bus calls, and we don't want to block the mainloop for that long.
The only exception to this now that I don't see a workaround for is
during module unload time. However, this shouldn't be a huge problem
since in most cases, this will only happen at server shutdown time.
The bulk of the change is partitioning the data so that PA core objects
only (well, mostly) get accessed in the PA mainloop and Avahi calls
happen only in the Avahi threaded mainloop.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=58758
Arun Raghavan [Wed, 15 May 2013 04:07:45 +0000 (09:37 +0530)]
mainloop: Add API to set thread name for threaded mainloop
Arun Raghavan [Wed, 15 May 2013 04:06:17 +0000 (09:36 +0530)]
pulsecore: Fix assert in pa_msgobject creation
Allows for creation of derived types that don't have any other fields.
poljar (Damir Jelić) [Wed, 22 May 2013 12:58:10 +0000 (14:58 +0200)]
shell-completion: Add list-cards to the pacmd completion.
The list-cards command was missing for both of the shell completions.
This fixes it.
Peter Meerwald [Wed, 15 May 2013 07:57:56 +0000 (09:57 +0200)]
rescue-streams: Fix wording of module description
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Peter Meerwald [Wed, 15 May 2013 07:53:30 +0000 (09:53 +0200)]
intended-roles: Fix typo in module description
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Peter Meerwald [Wed, 15 May 2013 07:39:26 +0000 (09:39 +0200)]
pactl: Use colon to separate priority in profiles output
for example:
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority. 60)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority. 6000)
it should be "priority: xxx", not "priority. xxx"
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Mitchell Fang [Wed, 22 May 2013 08:23:27 +0000 (11:23 +0300)]
thread-mainloop: Fix bug in example code
Checking the operation state caused a deadlock, because the state
won't change before my_drain_callback() returns, and it doesn't
return before my_drain_stream_func() calls
pa_threaded_mainloop_accept().
Peter Meerwald [Wed, 15 May 2013 15:49:42 +0000 (17:49 +0200)]
cli: Fix plural in caption of source-outputs list
$ pacmd list-source-outputs
>>> 4 source outputs(s) available.
outputs(s) makes no sense
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Mikel Astiz [Fri, 10 May 2013 08:30:47 +0000 (10:30 +0200)]
bluetooth: Support transport auto-release
With BlueZ 5, if the remote device suspends the audio, the transport
state will change to "idle" and the endpoint is not required to release
the transport, since this could introduce race conditions. Therefore,
ignore the call to pa_bluetooth_transport_release() if the transport is
not acquired any more.
Mikel Astiz [Fri, 10 May 2013 08:30:46 +0000 (10:30 +0200)]
bluetooth: Update to new BlueZ 5 transport acquire/release API
The new D-Bus API doesn't support access rights, which weren't used by
PulseAudio anyway, but it does solve a race condition: now optional
acquires can be implemented by bluetooth-util atomically using the D-Bus
TryAcquire() method.
Mikel Astiz [Fri, 10 May 2013 08:30:45 +0000 (10:30 +0200)]
bluetooth: Support media transport's State property
BlueZ 5 exposes a 'State' property in the media transport interface.
With regard to PA, this replaces the profile-specific interfaces, since
they were being used to know if the audio was streaming or not.
Mikel Astiz [Fri, 10 May 2013 08:30:44 +0000 (10:30 +0200)]
bluetooth: Parse media transport's properties
Add the code to parse the properties of the media transport object when
a PropertiesChanged signal is received.
Note that the transport might have an owner other than BlueZ, and thus
the property changes would be emitted from arbitrary senders. For
performance reasons, the installed match considers the interface name
where the property has changed.
It could be possible to install and remove the D-Bus matches dynamically
when a new owner is registered/unregistered, but filtering based on the
interface name seems good enough already.
Mikel Astiz [Fri, 10 May 2013 08:30:43 +0000 (10:30 +0200)]
bluetooth: Support Properties.PropertiesChanged signal
Install matches for signal Properties.PropertiesChanged and process the
properties corresponding to the tracked devices.
Mikel Astiz [Fri, 10 May 2013 08:30:42 +0000 (10:30 +0200)]
bluetooth: Support ObjectManager interface add/remove
Install matches for signals ObjectManager.InterfacesAdded and
ObjectManager.InterfacesRemoved, and process the devices that are
registered and unregistered dynamically.
Arun Raghavan [Mon, 23 Jul 2012 08:50:05 +0000 (14:20 +0530)]
core: Add an "internal" suspend cause
This lets us suspend devices from within the core for short periods
without having to overload one of the existing suspend causes.
https://bugs.freedesktop.org/show_bug.cgi?id=64118
Nikolay Amiantov [Sun, 5 May 2013 11:22:53 +0000 (15:22 +0400)]
pactl: Flush stdout buffer when printing subscribe events.
"pactl subscribe" is running continuously, and without flushing its output is
not usable for "process-on-arrival" per-line tasks, such as grepping. This
patch should fix this. For example, now:
pactl subscribe | grep 'server'
should print only server events as they arrive.
Mikel Astiz [Mon, 29 Apr 2013 16:28:04 +0000 (18:28 +0200)]
bluetooth: BlueZ 5 interface rename to org.bluez.MediaTransport1
Use the new interface name if BlueZ 5 has been detected.
Mikel Astiz [Mon, 29 Apr 2013 16:28:03 +0000 (18:28 +0200)]
bluetooth: BlueZ 5 interface rename to org.bluez.Media1
Use the new interface name if BlueZ 5 has been detected.
Mikel Astiz [Mon, 29 Apr 2013 16:28:02 +0000 (18:28 +0200)]
bluetooth: BlueZ 5 interface rename to org.bluez.MediaEndpoint1
Use the new interface name if BlueZ 5 has been detected.
Tanu Kaskinen [Wed, 1 May 2013 10:39:36 +0000 (13:39 +0300)]
bluetooth: Fix error checking style
Mikel Astiz [Mon, 29 Apr 2013 16:27:59 +0000 (18:27 +0200)]
bluetooth: Parse the tree returned by ObjectManager
Parse the result of ObjectManager.GetManagedObjects(), which includes
all objects registered, their interfaces and the corresponding
properties per interface.
Mikel Astiz [Mon, 29 Apr 2013 16:27:58 +0000 (18:27 +0200)]
bluetooth: Detect BlueZ 5
Check the existence of ObjectManager to detect the version of the
running daemon. If the interface exists, it should be BlueZ 5.
Tanu Kaskinen [Mon, 29 Apr 2013 13:46:13 +0000 (16:46 +0300)]
module: Assign the index before calling init()
Any code that runs inside the init() callback sees an invalid module
index. Sometimes init() does things that cause hooks to be fired. This
means that any code that uses hooks may see an invalid module index.
Fix this by assigning the module index before init() is called.
There are no known issues in the upstream code base where an invalid
module index would be used, but an out-of-tree module
(module-murphy-ivi) had a problem with this.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=63923
João Paulo Rechi Vita [Sat, 27 Apr 2013 00:24:52 +0000 (21:24 -0300)]
bluetooth: Remove the 'bluez.name' property
The 'Name' property of the Device interface became optional in BlueZ 5
and may not be present anymore (that happens when testing against the
PTS 4.7.0), so it's better not to expose it to clients so they don't
rely on its existence.
João Paulo Rechi Vita [Sat, 27 Apr 2013 00:26:36 +0000 (21:26 -0300)]
bluetooth: Use 'Alias' value as the device description
The 'Alias' property should be preffered over the 'Name' property,
according to the BlueZ API documentation.
João Paulo Rechi Vita [Fri, 26 Apr 2013 15:30:24 +0000 (12:30 -0300)]
bluetooth: Add 'bluez.alias' property
Peter Meerwald [Wed, 17 Apr 2013 07:49:03 +0000 (09:49 +0200)]
.gitignore: Ignore src/*.gcno files created when building with --enable-gcov
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
poljar (Damir Jelić) [Fri, 19 Apr 2013 14:35:14 +0000 (16:35 +0200)]
switch-on-port-available: Silence gcc warning.
This silences this gcc warning:
module-switch-on-port-available.c:111:12: warning:
'good' may be used uninitialized in this function
Ismo Puustinen [Fri, 12 Apr 2013 14:38:12 +0000 (17:38 +0300)]
module: initialize module index to invalid value.
m->init() was called while m->index was uninitialized, which was bad
style.
Peter Meerwald [Tue, 9 Apr 2013 14:10:16 +0000 (16:10 +0200)]
fdsem: Remember pa_write() type in pa_fdsem_post()
pa_write() knows two types of operation:
calling send() and calling write()
there is a flag (a pointer to an int) passed to pa_write()
which can remember which write type was successful
if the pointer is NULL or the int is 0, send() is tried first,
with a fallback to write() if send() resulted in ENOTSOCK
pa_fdsem_post() calls pa_write() with a NULL pointer;
unfortunately (at least with HAVE_SYS_EVENTFD_H #define'd) send()
always fails here and write() is called -- causing an extra syscall
quite frequently
strace:
send(17, "\1\0\0\0\0\0\0\0", 8, MSG_NOSIGNAL) = -1 ENOTSOCK (Socket operation on non-socket)
write(17, "\1\0\0\0\0\0\0\0", 8) = 8
the patch adds a write_type field to pa_fdsem to the successful
pa_write() type can be remembered and unnecessary send() calls are
avoided
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Tanu Kaskinen [Wed, 13 Jun 2012 09:45:16 +0000 (12:45 +0300)]
pasuspender: Resume before exiting in case of SIGINT or fork() failure.
Pressing Ctrl-C in a terminal while pasuspender is running
causes the sinks and sources to stay suspended after
pasuspender has exited, which is very annoying. This patch
fixes that problem, and also a similar problem with fork()
failures.
Tanu Kaskinen [Fri, 29 Mar 2013 15:17:14 +0000 (17:17 +0200)]
alsa: Don't use pa_strna() for port names
The name variable is never NULL, so there's no point in using
pa_strna().
Tanu Kaskinen [Wed, 13 Jun 2012 08:15:03 +0000 (11:15 +0300)]
core-util: Don't accept random words in pa_parse_boolean()
The old code accepted any word that started with "y", "Y",
"n", "N", "t", "T", "f" or "F". Fix this by having
a whitelist of full strings instead of checking just the
first letter.
Peter Meerwald [Thu, 28 Mar 2013 13:46:48 +0000 (14:46 +0100)]
build: make ARM NEON check in configure.ac more strict
the check for NEON so far only checked if -mfpu=neon is understood by the compiler,
however, this is not enough:
(i) #include <arm_neon.h> should be checked
(ii) -mfpu=neon must be passed before CFLAGS because eventually the per-library CFLAGS
for NEON code in src/Makefile.am are passed to the compiler before the global CFLAGS
in case the build environment passes CFLAGS to configure and we try to set conflicting
CFLAGS option, the former take precedence; CFLAGS cannot be overridden
this does not fix
http://lists.freedesktop.org/archives/pulseaudio-discuss/2012-December/015570.html
but at least makes the build fail in configure (and not while compiling stuff)
and gives better diagnostics
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
poljar (Damir Jelić) [Thu, 28 Mar 2013 11:05:11 +0000 (12:05 +0100)]
device-port: Introduce pa_device_port_new_data
Port creation is now slightly different. It is now similar to how
other objects are created (e.g. sinks/sources/cards).
This should become more useful in the future when we move more stuff to
the ports.
Functionally nothing has changed.
Tanu Kaskinen [Thu, 28 Mar 2013 08:49:27 +0000 (10:49 +0200)]
.gitignore: Update m4/ ignore list
Javier Jardón [Wed, 27 Mar 2013 14:00:36 +0000 (14:00 +0000)]
build-sys: Use upstream gettext instead glib one
João Paulo Rechi Vita [Wed, 27 Mar 2013 13:45:33 +0000 (10:45 -0300)]
bluetooth: Improve code and log readability
This commit makes the code cleaner, avoiding unnecessary line breaks. It
also changes the debug message elements order, to make it look more
natural ("path, interface, member" instead of "interface, path,
member").
João Paulo Rechi Vita [Wed, 27 Mar 2013 13:45:32 +0000 (10:45 -0300)]
bluetooth: Remove unnecessary braces
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:59 +0000 (18:04 +0300)]
device-port: Make it impossible to have dual-direction ports
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:58 +0000 (18:04 +0300)]
alsa-mixer: Remove the "name" option from the "General" section of path configuration files
This means that the path names will always correspond to the
path configuration file names, so they will automatically be
unique (in the scope of one card).
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:57 +0000 (18:04 +0300)]
alsa-mixer: Introduce "description-key" option for paths
Previously the path description was looked up based on the
path name only. Since there can be multiple paths that use
the same description, it had to be possible to have multiple
paths with the same name.
Having the same name with multiple paths makes identifying
the paths more complex than necessary, so the plan is to
make it impossible to have paths with the same name. This
patch prepares for that by retaining the possibility to
still have the same description with multiple paths. Instead
of the path name, the path description is looked up by using
the "path description key" if it is set (path name is still
used as a fallback lookup key).
Tanu Kaskinen [Wed, 27 Mar 2013 14:06:04 +0000 (16:06 +0200)]
switch-on-port-available: Fix error reporting style
Tanu Kaskinen [Wed, 27 Mar 2013 14:05:26 +0000 (16:05 +0200)]
switch-on-port-available: Remove a redundant function argument
Tanu Kaskinen [Fri, 29 Jun 2012 15:04:56 +0000 (18:04 +0300)]
switch-on-port-available: Prepare for dual-direction ports going away
As an extra, I broke try_to_switch_profile() into smaller
functions, because the two levels of loops with continue
statements inside both were a bit hard to follow.
Arun Raghavan [Mon, 3 Jun 2013 18:43:42 +0000 (00:13 +0530)]
build-sys: Bump soname
Arun Raghavan [Mon, 3 Jun 2013 18:38:14 +0000 (00:08 +0530)]
Add a NEWS file
Short version based on Tanu's longer notes posted on list (and now on
the wiki, linked from this file.
Vadim Troshchinskiy [Wed, 29 May 2013 10:58:36 +0000 (13:58 +0300)]
osx: Fix latency querying
get_latency_us() used an uninitialized variable, and an incorrect
scope for some of the AudioObjectGetPropertyData() calls. As a result,
audio would randomly not work at all.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=65122
Arun Raghavan [Thu, 23 May 2013 03:04:17 +0000 (08:34 +0530)]
build-sys: Bump soname
We dropped pa_format_info_free2 as an exposed symbol, but this was never
exposed via headers, so not counting this as ABI change.
David Henningsson [Wed, 22 May 2013 11:26:24 +0000 (13:26 +0200)]
rtp: Reset timestamp with correct size if not found
This fixes a compiler warning when building under Ubuntu.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Wed, 22 May 2013 11:21:24 +0000 (13:21 +0200)]
module-device-manager: Fix description restore
e->description is a pointer, not a fixed char array. Hence it
makes no sense to use strncmp.
This fixes a compiler warning when compiling under Ubuntu.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Wed, 22 May 2013 12:08:19 +0000 (14:08 +0200)]
core-util: Add pa_safe_streq
Like pa_streq, but does not blow up on NULL pointers.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Arun Raghavan [Mon, 13 May 2013 16:03:22 +0000 (21:33 +0530)]
sink-input,source-output: Deal with FIX* flags and extended API
The sample spec fixup when FIX* flags are set was not being propagated
to the pa_format_info, causing the two to be out of sync when FIX* was
used.
Mikel Astiz [Mon, 20 May 2013 09:48:33 +0000 (11:48 +0200)]
bluetooth: Fix missing port->profile association
Commit
17b3cb954b179392e80b0a46d8f2ba4693aec386 merged Bluetooth ports
into two ports (one for input, one for output) but the association
between ports and profiles was lost.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=64713
Mikel Astiz [Mon, 20 May 2013 09:48:32 +0000 (11:48 +0200)]
bluetooth: Create ports before card profiles
Both operations are currently independent and their order can therefore
be swapped.
David Henningsson [Wed, 15 May 2013 12:20:08 +0000 (14:20 +0200)]
sink-input/source-output: Don't set save_volume if volume is not writable
This fixes a later assertion failure in module-stream-restore.
Buglink: https://bugs.launchpad.net/bugs/896602
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Tanu Kaskinen [Mon, 20 May 2013 07:56:42 +0000 (10:56 +0300)]
map-file: Remove pa_format_info_free2
The function doesn't exist anymore.
David Henningsson [Thu, 16 May 2013 08:56:21 +0000 (10:56 +0200)]
alsa-mixer: Add "Line Out Jack" to analog-output.conf
A stationary computer usually has headphone jack(s) and line out jacks.
In some cases analog-output.conf will be a subset of
analog-output-headphones.conf, causing line outs to be unusable (because
headphones are unplugged).
This late in the cycle, this was the safest way I could think of to try
to fix this for a particular computer. In later versions of PulseAudio
we could consider making a dedicated line out path instead, and have
proper jack detection there.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 14 May 2013 09:01:13 +0000 (11:01 +0200)]
alsa: Fix crash when profile_set == NULL
Better check if the pointer is NULL before dereferencing it, instead of
after!
BugLink: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1159853
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 14 May 2013 03:49:11 +0000 (05:49 +0200)]
po: Fix error in hungarian translation
The stray %s caused PulseAudio to crash.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Peter Meerwald [Mon, 22 Apr 2013 13:36:12 +0000 (15:36 +0200)]
echo-cancel: Fix send/recv_counter in calc_diff()
send_counter/recv_counter relate to the bytes (play stream) passed
through the queue, hence the same sample spec must be used
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Acked-by: Stefan Huber <shuber@sthu.org>
Tanu Kaskinen [Wed, 12 Sep 2012 13:03:59 +0000 (16:03 +0300)]
alsa-mixer: Don't use the mono path in the analog-stereo mapping.
As far as I can see, having a mono path in a stereo mapping doesn't
make any sense. It also causes breakage: if the Master Mono mixer
element has two volume channels, the analog-output path gets removed
due to being a subset of analog-output-mono, and that in turn causes
the Master element getting muted. Users generally don't like that.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=54673
Peter Meerwald [Wed, 17 Apr 2013 13:07:32 +0000 (15:07 +0200)]
doc: Reword description of meta commands in pulse-cli-syntax.5
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Peter Meerwald [Wed, 17 Apr 2013 13:07:31 +0000 (15:07 +0200)]
doc: Fix description how boolean values can be specified
"any word starting with the letters" parts; this does not hold
any longer with commit
0e29e7365907ffbe90df768a4dea277dba40d495
core-util: Don't accept random words in pa_parse_boolean()
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Peter Meerwald [Wed, 17 Apr 2013 13:07:30 +0000 (15:07 +0200)]
doc: Mention just one CLI language in default.pa.5
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Peter Meerwald [Wed, 17 Apr 2013 13:16:36 +0000 (15:16 +0200)]
pstream: Fix case in log message
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Arun Raghavan [Sat, 27 Apr 2013 03:27:05 +0000 (08:57 +0530)]
build-sys: json-c changed everything :(
json-c 0.11 ships a pkg-config file with a different name, and changes
the name of its library as well.
David Henningsson [Tue, 16 Apr 2013 04:40:40 +0000 (06:40 +0200)]
alsa-mixer: Switch to Headphone when Headphone mic jack is plugged in
When a "Headphone Mic" jack becomes available, we do not know if
a headphone or a mic has been plugged in. Therefore, setting both
paths to "unknown" is, in theory, the correct thing to do.
However, in practice, people are more likely to plug in a headphone
rather than a mic. Therefore, allow autoswitch to the headphone port
when the jack is plugged in.
A more advanced implementation would consider what was plugged in last
time depending on what port was selected on the input side at that
time, and set availability accordingly. However, such an implementation
will have to wait (probably at least until we have our fancy routing
system implementation).
Buglink: https://bugs.launchpad.net/bugs/1169143
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Wed, 24 Apr 2013 08:59:42 +0000 (10:59 +0200)]
alsa-mixer: Allow input fallback port for devices with no gain control
I recently came across a device without any ALSA-level mixer controls,
everything was physical knobs on the hardware.
This patch enables that device to get a port too ("Analog Input").
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 16 Apr 2013 12:56:35 +0000 (14:56 +0200)]
alsa: Fix ELD access warning on shutdown
The hdmi_eld_changed callback is called by alsa-lib at shutdown.
In that case, just exit instead of trying to access something with
already closed handles.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 16 Apr 2013 11:09:38 +0000 (13:09 +0200)]
default.pa: Load switch-on-port-available before udev-detect
We need to pick the right port as early as possible, before the
first volume is picked up. Hence this module needs to be loaded
before the sound card modules are loaded.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 16 Apr 2013 14:20:36 +0000 (16:20 +0200)]
module-switch-on-port-available: Handle hotplugged cards
If a card is hot-plugged (which all cards will be when we load
this module before module-*-detect), make sure we don't start up
a sink with an unavailable port selected.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
David Henningsson [Tue, 16 Apr 2013 13:17:37 +0000 (15:17 +0200)]
alsa: Initialize ports before sinks/sources
This way port availability has been filled in when we create the
sink, which will later enable us to pick the right port directly.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Piotr Drąg [Tue, 16 Apr 2013 18:03:57 +0000 (20:03 +0200)]
i18n: Update Polish translation
Arun Raghavan [Sat, 20 Apr 2013 04:42:34 +0000 (10:12 +0530)]
pulsecore: Make run-from-build not readlink() on every call
Since this is no longer only defined in debug builds, let's make sure
that there is no impact if this is indavertently called repeatedly at
startup.
Arun Raghavan [Sat, 20 Apr 2013 04:20:38 +0000 (09:50 +0530)]
daemon: Fix dlsearchpath while running from build tree
It appears that, libltdl will find the .la file in the builddir and
figure out where the real .so is.
This also requires .ifexists to be fixed up to correspondingly search in
<dlsearchpath>/.libs.
Arun Raghavan [Fri, 19 Apr 2013 09:34:45 +0000 (15:04 +0530)]
rygel: Set DLNA profile on our MediaItems
We know we always serve up LPCM, and exposing this via D-Bus lets Rygel
set the appropriate metadata while presenting the raw (i.e.
non-transcoded) stream to clients.
Peter Meerwald [Fri, 12 Apr 2013 08:53:00 +0000 (10:53 +0200)]
doc: Explain PULSE_SERVER string in pulseaudio.1
first attempt to document the "server string"
See https://bugs.freedesktop.org/show_bug.cgi?id=62444
quite a bit is missing: [hostname], defaults
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Peter Meerwald [Fri, 12 Apr 2013 09:27:54 +0000 (11:27 +0200)]
doc: Document PULSE_COOKIE in pulseaudio.1
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
João Paulo Rechi Vita [Tue, 16 Apr 2013 22:26:27 +0000 (19:26 -0300)]
alsa-source: Fix log message
The log message when updating the source sample rate wrongly mentions
"Sink" instead of "Source". This was probably a copy and paste error.
Peter Meerwald [Wed, 10 Apr 2013 16:59:22 +0000 (18:59 +0200)]
doc: Some more nitpicking in pulse/def.h doxygen documentation
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Peter Meerwald [Wed, 10 Apr 2013 16:59:21 +0000 (18:59 +0200)]
doc: Mostly fixing up i.e. versus i.e.\ in doxygen documentation
same for e.g. versus e.g.\ and e.g. versus E.g.
this is ueber-nitpicking: will anybody ever notice?
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
David Henningsson [Tue, 16 Apr 2013 12:44:05 +0000 (14:44 +0200)]
alsa-mixer: Change profile-sets directory to PA_SRCDIR
A recent patch changed the path files from PA_BUILDDIR to PA_SRCDIR.
Do the same to the profile-set files for consistency (and to fix
out of tree builds).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Yuri Chornoivan [Sat, 13 Apr 2013 18:32:57 +0000 (21:32 +0300)]
Fix various typos in messages and comments
Arun Raghavan [Tue, 16 Apr 2013 06:08:23 +0000 (11:38 +0530)]
equalizer: Fix compiler warning due use of 'signal'
Changing uses of the symbol 'signal' as it redefines the signal-handling
libc function of the same name.
Arun Raghavan [Mon, 15 Apr 2013 18:03:13 +0000 (23:33 +0530)]
build-sys: Bump sonames
libpulse-simple changed this time as well (addition of hole-handling).
Arun Raghavan [Sun, 14 Apr 2013 05:54:41 +0000 (11:24 +0530)]
alsa: Fix mixer path when running from build tree
The mixer paths are not available in ${builddir} - we need to look in
${srcdir}. This should fix running an in-tree build without make install
as well as alsa-mixer-path-test in make distcheck.
Since the most straightforward way to define PA_SRCDIR was in
Makefile.am, I'm moving PA_BUILDDIR there as well for consistency.
Arun Raghavan [Sun, 14 Apr 2013 05:02:26 +0000 (10:32 +0530)]
pulsecore: Don't conditionally inline pa_run_from_build_tree()
There's no good reason to assume an in-tree build will be debug-only.
This breaks alsa-mixer-path-test on make distcheck, for example.
David Henningsson [Fri, 12 Apr 2013 09:56:17 +0000 (11:56 +0200)]
alsa-mixer: Add more jack detection for Headset mic path
On some machines which has a headset jack, the headset mic does not have its own
jack detection. Then we can look at the headphone jack to get some indication:
We know that if the headphone is unplugged, so is the headset mic. The opposite
is not guaranteed since the user might have plugged in a headphone, not a headset.
Also, there exist multi-function jacks which support both Headphone, Mic in headphone jack
and Headset Mic. In this case the jack name will be "Headphone Mic", not "Headphone", so
we need to include this name too.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Tanu Kaskinen [Thu, 28 Mar 2013 15:30:16 +0000 (17:30 +0200)]
sink, source: Send notifications when flags change
The hooks aren't currently used, but for example, the D-Bus protocol
could use them if it implemented flag change signals.
Tanu Kaskinen [Thu, 28 Mar 2013 15:30:15 +0000 (17:30 +0200)]
sink, source: Really set the fixed latency in set_fixed_latency_within_thread(), always.
The old assumption seemed to be that if a sink or source has the
DYNAMIC_LATENCY flag set, it can never change, so the fixed latency
will always be zero. This assumption doesn't hold with filter sinks
and sources that are moved around.
This fixes a crash with two module-virtual-sink instances on top of
each other, when the bottom one is moved from a sink without dynamic
latency to a sink with dynamic latency. What happened was that first
the bottom virtual sink "updated" (due to this bug nothing was
actually updated) its fixed latency to match the master sink (zero
fixed latency), and then the top virtual sink updated its fixed
latency to match the master sink. The master sink was the bottom
virtual sink, whose fixed latency should have been set to zero, but it
was not, so the pa_sink_set_fixed_latency_within_thread() failed in
the assertion "latency == 0".
Tanu Kaskinen [Thu, 28 Mar 2013 15:30:14 +0000 (17:30 +0200)]
sink, source: Propagate flag changes to filters
An example: let's say that there's an alsa sink and two filter sinks
on top of each other:
alsa-sink <- filter1 <- filter2
With the old code, if filter1 gets moved to another sink, and the
new sink doesn't have the LATENCY and DYNAMIC_LATENCY flags set
(unlike alsa-sink), filter1's flags are updated fine in the moving()
callback, but filter2 is not notified at all about the flag changes.
With this patch, the flag changes are propagated to filter2 too.
Tanu Kaskinen [Tue, 9 Apr 2013 08:32:20 +0000 (11:32 +0300)]
shm: Don't force the shm files to be read-only
Forcing the shm file to be read-only makes shm_unlink() fail on OS X.
Thanks to Albert Zeyer for reporting the bug and investigating the
root cause.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=62988