s5pc110: kessler: fixed omitted conditions (LCD/MAX17040 for rev 0.9)

s5pc110: kessler: code cleanup

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: kessler: Use the kessler name instead of aries

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Use correct aquila machine id

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: bt: Restore control method of gpio related to BT when resume/suspend

s5pc110: aquila: adjust mtd partition

0: bootloader          0x00040000 0x00000000 0
1: params              0x00040000 0x00040000 0
2: config              0x00380000 0x00080000 0
3: csa                 0x00800000 0x00400000 0
4: kernel              0x00700000 0x00c00000 0
5: log                 0x00100000 0x01300000 0
6: modem               0x00c00000 0x01400000 0
7: qboot               0x02000000 0x02000000 0
8: UBI                 0x1c000000 0x04000000 0

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: rtc.h omitted endif

s5pc110: rtc registers structured.

s5pc110: RTC registers added (will be used for charger)

s5pc110: aquila: fix mtd partition and remove csa migration

 #: name size offset mask_flags
0: bootloader          0x00040000 0x00000000 0
1: params              0x00040000 0x00040000 0
2: config              0x00380000 0x00080000 0
3: csa                 0x00800000 0x00400000 0
4: kernel              0x00600000 0x00c00000 0
5: log                 0x00100000 0x01200000 0
6: modem               0x00c00000 0x01300000 0
7: qboot               0x01e00000 0x01f00000 0
8: UBI                 0x1c300000 0x03d00000 0

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: sleep: remove warning

sleep.c: In function 's5pc110_sleep':
sleep.c:353: warning: implicit declaration of function 'board_sleep_init_late'

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: p1p2: fix onenand_ipl build for EVT1

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

charger: wakeup and start booting if TA is out while charging/sleeping.

s5pc110: usbd: remove warnings

usb_downloader.c: In function 'usb_stop':
usb_downloader.c:113: warning: implicit declaration of function 's5pc_fimd_lcd_off'
usb_downloader.c:114: warning: implicit declaration of function 's5pc_fimd_window_off'
usb_downloader.c: At top level:
usb_downloader.c:58: warning: 's5p_usb_clear_upfile_info' defined but not used

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

video: remove warning

font_8x16.c:4629: warning: pointer targets in initialization differ in signedness

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: p1: change ubi.mtd

Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>

s5pc110: p1: divide cpu revision between evt0 and evt1.

Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>

s5pc110: p1: change mtd partition.

Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>

s5pc110: gpio pdn setting: remove keep_state for CODEC/FM

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: Fix typo

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: gpio pdn setting: turn on/off keep_state.

s5pc110: neptune: code clean unused bit for MADCTL

s5pc110: neptune: Correct RGB/BGR order

s5pc110: Remove unused functions and use the common header file

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: p1: home key usb download available

Signed-off-by: Sang-youl Ha <sy1004.ha@samsung.com>

s5pc110: aquila: Can modify console for wmg160

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: fb: changed lcd info name.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: fb: code clean.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: lcd: reversed lcd panel for Cypress and bug fix.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: aquila: fix wrong commit

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: aquila: increase the log partition

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: fb: changed fimd clock to sclk_fimd.

Signed-off-by: daeinki <inki.dae@samsung.com>

s5pc110: p1p2: No LCD support & No MMC support

Signed-off-by: Jeong-Seok Yang <jseok.yang@samsung.com>

s5pc110: clock: move PLL defines

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: universal: add factory off usb to auto download mode

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: universal: fix typo

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: don't use fb functions when lcd is not supported

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: aquila: Fix compiler warning since typo

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Revert "s5pc110: wmg160: Workaround comments because of wrong board detection"

This reverts commit 643344ab72cadd769be981653672cc1e21fd5e61.

s5pc110: Fix keypad codes

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: wmg160: Workaround comments because of wrong board detection

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx

s5pc110: aquila: Workaround for key usb download

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

usbd: check mmc is supported

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: wmg160: USB support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx

s5pc110: wmg160: Board detection with GPH3[0:4]

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: No MMC support

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: wmg160: Fixme board detection

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: Fix wrong machine detection

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: No MMC & LCD support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: GPIO I2C support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: Display EVT0 when CPU is EVT0

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: initial support

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: wmg160: Add machine ID

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Revert "s5pc110: aries: GPIO PDA_ACTIVE is not "OUTPUT-HIGH""

This reverts commit 0d7a106f48488a48180441086648536f12fc4117.

PDA_ACTIVE OUTPUT-HIGH is for "IDLE" not for "SLEEP"

Wait until H/W confirms about this and use the old values.

s5pc110: aquila: set KEEP_STATE at FM_RST gpio

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aquila: Set CODEC_LDO_EN gpio to KEEP_STATE

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aries: GPIO PDA_ACTIVE is not "OUTPUT-HIGH"

H/W requested this setting. Modem should follow this change in
order to prevent sleep current leakage.

s5pc110: lcd: code clean

s5pc110: lcd: code clean

s5pc110: aries: Add LDO_CODEC_EN comments

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aries: Set LDO_CODEC_EN gpio to KEEP_STATE

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

s5pc110: aries: copied BCM4329 comments from aquila

s5pc110: aquila: Add BCM4329 comments for sleep current

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: lcd: code clean

s5pc110: aries: set KEEP_STATE at Wlan_bt_en & Wlan_nRST
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

s5pc110: UART_SEL is OUTPUT_LOW at powerdown (UART=CP)

s5pc110: neptune: clean spi platform data

s5pc110: neptune: Add fuel gauge

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: aquila: Fix wrong assigned for CSA migration

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc111: neptune: add s6d16a0x lcd driver

s5pc111: neptune: Neptune with HVGA LCD support

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>

BUILD: Add dh.lee build script

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>

usbd: skip the CSA Clear temporary (for CSA Migration)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

usbd: fix num of mmc parts

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: universal: increase the modem partition

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: Add CSA migration messages

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: universal: add mtd3 to bootargs

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: universal: add csa migration code (temporary)

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

Merge branch 'master' of prom@party:/pub/git/u-boot-s5pc1xx

usbd: fix kernel partition sync

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: aries: do not set "KEEP_STATE" for WLAN_BT_EN, WLAN_nRST

- Revert those setup for Aries.
- Sleep current test: Aries
- BT/WLAN test: Aquila

Revert "OneNAND: Don't write if it exceeds the partition"

This reverts commit 2ce10476e35556875d8227c0cf753b7b1726ea4b.

Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx

OneNAND: Don't write if it exceeds the partition

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

s5pc110: universal: partition update (temporary)

 name size offset mask_flags
 0: bootloader          0x00040000 0x00000000 0
 1: params              0x00040000 0x00040000 0
 2: config              0x00380000 0x00080000 0
 3: csa_new             0x00800000 0x00400000 0
 4: kernel              0x00600000 0x00c00000 0
 5: log                 0x00100000 0x01200000 0
 6: modem               0x00980000 0x01300000 0
 7: csa                 0x00800000 0x01c80000 0
 8: UBI                 0x1db80000 0x02480000 0

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

usbd: add support mmc partition write

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

s5pc110: wlan_bt: Keep state of GPB(3) for BT_nRST gpio when resume/suspend

s5pc110: aquila/aries GPIO setting update

- SET HIGH -> KEEP_STATE for UART_SEL (CP might be using UART
  just before an instance of sleep.)

- KEEP_STATE setting of WLAN/BT in Aquila is copied to Aries.
- KEEP_STATE setting of UART_SEL in Aries is copied to Aquila.

s5pc110: aries: set UART_SEL High for sleep.

Sleep current: stabilized at 1.22mA
No more JIG malfunction during sleep.

s5pc110: aqulia: use Keep_STATE about wlan_bt_en, wlan_nRst
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

s5pc110: aries: GPIO powerdown mode setting update done.

Aries sleep current: 1.22~1.24mA @ 4.2V

Based on the LSI suggestion on Aries. Some of the suggestions
are dropped because they increase the power consumption.

s5pc110: aries: GPIO powerdown mode setting updated: 1.38->1.24mA

- Mainly, PHONE_ON (O-L -> O-H) reduces the sleep current.
- For "Not Connected (NC)", O-L -> I(PD) reduces the sleep
  current extremely slightly... (need tens of them to see
  any difference)

s5pc110: geminus: support GPIO powerdown modes.

- Setting is same as Aquila/Aries for now. Needs to be updated
  seperatedly later.
- With this setting, Geminus rev1 has 80 ~ 200 mA of sleep
  current.

s5pc110: not aries: mirror setting incurs 2mA of sleep current in rev 0.8

s5pc110: CP_RST Low->High should not be done too early before boot cmd.

- Sometimes, it takes more than 15 sec, which often allow CP
to turn off before sending a boot cmd.
- However, because there should be some delay between CP_RST Hi
and boot cmd, we need to modify kernel as well.

s5pc110: geminus: support fsa9480 / max17040 for rev1 geminus.

- U-boot charging is enabled for u-boot.

s5pc110: aquila: CP_RST (GPH3_7) On at u-boot like Aries does.

s5pc110: do mirror setting for HWREV_MODE* gpio pins

- Mirror setting: if the pin is attached to "High", set it as
  pull-up for sleep and pull-down for "Low" pins.
- This is supposed to lower around 0.06mA of sleep current.

- In Aries, the sleep current became 1.39mA --> 1.34mA @ 4.22V
(Yes, it's under 1.5mA!!)