Lukasz Luba [Wed, 14 Nov 2018 15:41:24 +0000 (16:41 +0100)]
sched/power: do not change state for single cooling zone
Skip changing state when zone is single cooling, just change
the max allowed state.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Wed, 14 Nov 2018 15:27:17 +0000 (16:27 +0100)]
sched/power: add recalc power budget and trace events
When sharing power budget fails, try to recalculate and share again.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 13 Nov 2018 17:23:43 +0000 (18:23 +0100)]
sched/power: max allowed state capping fixed
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 13 Nov 2018 16:40:21 +0000 (17:40 +0100)]
sched/power: add check for max possible frequency of cooling device
The patch adds basic check for possible state change.
The 'target' state is compared with maximum allowed for the single
cooling device.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Fri, 9 Nov 2018 15:16:49 +0000 (16:16 +0100)]
sched/power: collect unused power for future split
The power which cannot be applied to the cooling device
might be re-used in the next phase.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Fri, 9 Nov 2018 14:15:22 +0000 (15:15 +0100)]
sched/power: improve share power algorithm
Improve the algorithm of sharing the power budget to cooling
devices.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Fri, 9 Nov 2018 13:11:04 +0000 (14:11 +0100)]
sched: fix flags in sched_power
Fix values of the flag.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Fri, 9 Nov 2018 13:09:25 +0000 (14:09 +0100)]
arm64: dts: exynos5433: change trip point 'SoC' thresholds
Trigger later the algorithm in sched_power.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Fri, 9 Nov 2018 09:09:24 +0000 (10:09 +0100)]
sched/power: set sum_power to 1 and finish calculation
Setting 1 allows to finish calculation and throttle devices.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 20:53:01 +0000 (21:53 +0100)]
sched/power: handle cluster weight change requests
Add basic support for handling cluster weight reqest.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 19:45:06 +0000 (20:45 +0100)]
arm64: dts: exynos5433: change virtual temperature sensor
Skip broken GPU sensor.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 19:33:49 +0000 (20:33 +0100)]
sched/power: alwas take into current integral into account
In controler algorithm take into account current overshout error
and don't wait till next period.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 19:23:29 +0000 (20:23 +0100)]
arm64: dts: exynos5433: change the trip points to passive
Change to passive with polling mode.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 18:02:26 +0000 (19:02 +0100)]
sched/power: implement simple PI with integral decaying
The patch adds simple implementation of control algorithm
based on PI with additional decaying for integral.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 16:04:30 +0000 (17:04 +0100)]
sched/power: allocate power for cooling devices
Simple implementation of throttling the CPUs.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 11:08:45 +0000 (12:08 +0100)]
arm64: dts: exynos5433: add ctrl-alg flag in trip points
The flags enable sched_power to work with these thermal zones.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 11:03:16 +0000 (12:03 +0100)]
sched/power: add support of trip control algorithm
Adds implementation of trip flags and temeprature for 'switch_on'
and 'desired' temperature for control algorithm.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 11:00:54 +0000 (12:00 +0100)]
thermal: add trip flag for control algorithm
The patch adds support of a new flag comming from DT trip point
description. The flag is used by control algorithm for thresholds:
'switch_on' and 'desired' temperature.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 8 Nov 2018 09:43:13 +0000 (10:43 +0100)]
sched/power: change calc budget params
Change calculation parameters
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Wed, 7 Nov 2018 20:51:07 +0000 (21:51 +0100)]
sched/power: cleanup warnings
It will be squashed
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Wed, 7 Nov 2018 19:41:27 +0000 (20:41 +0100)]
sched/power: register only the real cooling device not instances
Check if the instance is not pointing to the already known
cooling device. Skip registration of instances, take into account
only real cooling devices.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 6 Nov 2018 16:47:54 +0000 (17:47 +0100)]
sched/power: add thermal governor cooling devices and zones
The patch populated cooling devices for clusters and CPUs.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 6 Nov 2018 16:45:49 +0000 (17:45 +0100)]
thermal: cpu_cooling: add function which copies cpumask
The patch add fnction which provides information which CPUs
are pinned to the related cpufreq cooling device.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 6 Nov 2018 11:03:27 +0000 (12:03 +0100)]
sched: power: add thermal governor and move some headers
Introduce thermal governor which has abilities to serve
scheduler needs. Basic algorithm tracks current temperature
and the limit. Based on this difference estimated power budget
is calculated.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 14:05:17 +0000 (15:05 +0100)]
sched/power: refactor update function
The update function must handle a few types of requests
which are reconized based on 'flags'.
Add switch which trigger different paths in the code.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 13:24:23 +0000 (14:24 +0100)]
sched/power: change 'weight' type allowing to decrese value
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 13:21:24 +0000 (14:21 +0100)]
sched/fair: testing sched power interfaces
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 13:19:51 +0000 (14:19 +0100)]
sched/sched.h: add new function for changing cluster power 'weight'
This patch adds new interface for sched power which controls
power allocation for CPUs.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 12:23:49 +0000 (13:23 +0100)]
sched/power: add idle injection
Idle injection is used for keeping the cluster under
thermal envelope. Some of the CPUs in the cluster run
idle task to limit power consumption on higher OPP.
There is one CPU which runs highest speed on that OPP
and one task which benefits from more cycles in this period.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 12:22:15 +0000 (13:22 +0100)]
thermal: cpu_cooling: add function showing CPUs in cooling dev
Implent basic function which returns affected CPUs mask
for a given CPU in the cooling device.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 30 Oct 2018 12:20:28 +0000 (13:20 +0100)]
idle_inject: move needed structure to header file
Small refactoring needed by files from different locations.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Mon, 29 Oct 2018 14:37:12 +0000 (15:37 +0100)]
sched/power: change update filter function
Add basic filtering mechanism of filtering to frequent requests.
On the other hand create a by-pass for RT od deadline bandwith
requests which must be served.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 16 Aug 2018 08:30:34 +0000 (10:30 +0200)]
DT: arm64: exynos: Change polling time for soc thermal zone
The patch changes polling intervals values.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 16 Aug 2018 08:28:19 +0000 (10:28 +0200)]
DT: arm64: exynos: add capacitance for every cpu core
This patch enables IPA cooling device needed functions.
The values are experimental and could not be the right one.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 14 Aug 2018 15:48:00 +0000 (17:48 +0200)]
thermal: add virtual temperature sensor
The new type of sensor allows to calculate temperature
of thermal zone container. It relays on real thermal zones
temperature and provides basic weighted avg algorithm.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 14 Aug 2018 15:46:15 +0000 (17:46 +0200)]
DT: arm64: exynos: add support fot container thermal zone
Add basic support for new type of thermal zone - container
with new virtual temperature sensor.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 14 Aug 2018 13:04:20 +0000 (15:04 +0200)]
thermal: add containers with thermal zones
This patch adds a new concept of a container thermal zone,
which agregates subzones. There is only one level allowed.
It relays on virtual temperature sensor which calculates
the temp based on real sensors from subzones.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 7 Aug 2018 10:43:37 +0000 (12:43 +0200)]
DT: arm64: exynos5433: Add SoC thermal zone for IPA
Draft support for future IPA tests.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 25 Oct 2018 17:17:57 +0000 (19:17 +0200)]
sched/power: update thermal subsystem after CPUs reweight
The patch....
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 25 Oct 2018 17:17:04 +0000 (19:17 +0200)]
thermal: add function which triggers update of all zones
The patch....
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 25 Oct 2018 16:27:09 +0000 (18:27 +0200)]
sched/power: add power and thermal governance
This patch add new feature for the scheduler and provides
connection with thermal subsystem which grants power to
cooling devices (in DVFS - CPU devices).
.....
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Thu, 25 Oct 2018 16:24:46 +0000 (18:24 +0200)]
thermal: add sched driven feature to thermal_instance
This patch adds a new flag and init function for thermal_instance
in order to provide connection with scheduler.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Lukasz Luba [Tue, 23 Oct 2018 14:09:46 +0000 (16:09 +0200)]
thermal: add interface for changing 'weight' of cpu cooling
This patch add an interface which allows to change the weight
of a CPU cooling device. It changes the allocated power
in every thermal zone were this device is pinned.
The wieght varies from 0 to 1024 (0.0 to 1.0) and is
multipiled by requested power in IPA thermal governor.
With this patch it is possible to tune the algorithm
which calculates and grants power for thermal actors,
so some CPUs get higher freqencies as their operating limits.
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Marek Szyprowski [Mon, 8 Oct 2018 10:21:55 +0000 (12:21 +0200)]
clocksource: arch_timer: Add support for not-fw-configured timer on ARM64
Use common infrastructure for ARM Architected Timers erratum to enable
support for systems with broken CPU firmware (timer registers not
properly configured). This mode has been already availabled on ARM
(32bits) architecture. This enables to run Linux kernel on ARM64 boards
using physical architected timers instead of the virtual ones. Examples
of such system with broken firmware are Samsung Exynos5433 SoC based
TM2(e) boards, which is already deployed for years and updating firmware
is not possible.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Marek Szyprowski [Mon, 8 Oct 2018 10:55:31 +0000 (12:55 +0200)]
arm64: dts: exynos: Mark arch_timer device as not-fw-configured on TM2(e)
TM2(e) boards use old firmware, which some PCSI requirements and doesn't
properly configure arch virtual timers, so add property indicating this
state. This enables respective workarounds in the timer driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Greg Kroah-Hartman [Mon, 22 Oct 2018 06:37:37 +0000 (07:37 +0100)]
Linux 4.19
Greg Kroah-Hartman [Fri, 19 Oct 2018 09:30:16 +0000 (11:30 +0200)]
MAINTAINERS: Add an entry for the code of conduct
As I introduced these files, I'm willing to be the maintainer of them as
well.
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 19 Oct 2018 09:08:12 +0000 (11:08 +0200)]
Code of Conduct: Change the contact email address
The contact point for the kernel's Code of Conduct should now be the
Code of Conduct Committee, not the full TAB. Change the email address
in the file to properly reflect this.
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 19 Oct 2018 09:04:07 +0000 (11:04 +0200)]
Code of Conduct Interpretation: Put in the proper URL for the committee
There was a blank <URL> reference for how to find the Code of Conduct
Committee. Fix that up by pointing it to the correct kernel.org website
page location.
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 19 Oct 2018 08:45:08 +0000 (10:45 +0200)]
Code of Conduct: Provide links between the two documents
Create a link between the Code of Conduct and the Code of Conduct
Interpretation so that people can see that they are related.
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 19 Oct 2018 08:28:14 +0000 (10:28 +0200)]
Code of Conduct Interpretation: Properly reference the TAB correctly
We use the term "TAB" before defining it later in the document. Fix
that up by defining it at the first location.
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 14 Oct 2018 14:16:47 +0000 (16:16 +0200)]
Code of Conduct Interpretation: Add document explaining how the Code of Conduct is to be interpreted
The Contributor Covenant Code of Conduct is a general document meant to
provide a set of rules for almost any open source community. Every
open-source community is unique and the Linux kernel is no exception.
Because of this, this document describes how we in the Linux kernel
community will interpret it. We also do not expect this interpretation
to be static over time, and will adjust it as needed.
This document was created with the input and feedback of the TAB as well
as many current kernel maintainers.
Co-Developed-by: Thomas Gleixner <tglx@linutronix.de>
Co-Developed-by: Olof Johansson <olof@lixom.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Borislav Petkov <bp@kernel.org>
Acked-by: Chris Mason <clm@fb.com>
Acked-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Acked-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Sterba <kdave@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Hans de Goede <j.w.r.degoede@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: James Smart <james.smart@broadcom.com>
Acked-by: James Smart <jsmart2021@gmail.com>
Acked-by: Jan Kara <jack@ucw.cz>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Jiri Kosina <jikos@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Lina Iyer <ilina@codeaurora.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Matias Bjørling <mb@lightnvm.io>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Mishi Choudhary <mishi@linux.com>
Acked-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Palmer Dabbelt <palmer@dabbelt.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shuah Khan <shuah@kernel.org>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Takashi Iwai <tiwai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Mason [Thu, 11 Oct 2018 16:09:31 +0000 (09:09 -0700)]
Code of conduct: Fix wording around maintainers enforcing the code of conduct
As it was originally worded, this paragraph requires maintainers to
enforce the code of conduct, or face potential repercussions. It sends
the wrong message, when really we just want maintainers to be part of
the solution and not violate the code of conduct themselves.
Removing it doesn't limit our ability to enforce the code of conduct,
and we can still encourage maintainers to help maintain high standards
for the level of discourse in their subsystem.
Signed-off-by: Chris Mason <clm@fb.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Borislav Petkov <bp@kernel.org>
Acked-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: David Sterba <kdave@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.de>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Hans de Goede <j.w.r.degoede@gmail.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Acked-by: James Smart <james.smart@broadcom.com>
Acked-by: James Smart <jsmart2021@gmail.com>
Acked-by: Jan Kara <jack@ucw.cz>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Jiri Kosina <jikos@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Lina Iyer <ilina@codeaurora.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Matias Bjørling <mb@lightnvm.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Nikolay Borisov <n.borisov.lkml@gmail.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Palmer Dabbelt <palmer@dabbelt.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shuah Khan <shuah@kernel.org>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Takashi Iwai <tiwai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tim Bird <tim.bird@sony.com>
Acked-by: Todd Poynor <toddpoynor@google.com>
Acked-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 21 Oct 2018 11:51:36 +0000 (13:51 +0200)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Wolfram writes:
"i2c for 4.19
Another driver bugfix and MAINTAINERS addition from I2C."
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: cleanup DMA for all kinds of failure
MAINTAINERS: Add entry for Broadcom STB I2C controller
Greg Kroah-Hartman [Sun, 21 Oct 2018 08:08:38 +0000 (10:08 +0200)]
Merge git://git./linux/kernel/git/davem/net
David writes:
"Networking:
A few straggler bug fixes:
1) Fix indexing of multi-pass dumps of ipv6 addresses, from David
Ahern.
2) Revert RCU locking change for bonding netpoll, causes worse
problems than it solves.
3) pskb_trim_rcsum_slow() doesn't handle odd trim offsets, resulting
in erroneous bad hw checksum triggers with CHECKSUM_COMPLETE
devices. From Dimitris Michailidis.
4) a revert to some neighbour code changes that adjust notifications
in a way that confuses some apps."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
Revert "neighbour: force neigh_invalidate when NUD_FAILED update is from admin"
net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
net: fix pskb_trim_rcsum_slow() with odd trim offset
Revert "bond: take rcu lock in netpoll_send_skb_on_dev"
Roopa Prabhu [Sun, 21 Oct 2018 01:09:31 +0000 (18:09 -0700)]
Revert "neighbour: force neigh_invalidate when NUD_FAILED update is from admin"
This reverts commit
8e326289e3069dfc9fa9c209924668dd031ab8ef.
This patch results in unnecessary netlink notification when one
tries to delete a neigh entry already in NUD_FAILED state. Found
this with a buggy app that tries to delete a NUD_FAILED entry
repeatedly. While the notification issue can be fixed with more
checks, adding more complexity here seems unnecessary. Also,
recent tests with other changes in the neighbour code have
shown that the INCOMPLETE and PROBE checks are good enough for
the original issue.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern [Fri, 19 Oct 2018 17:00:19 +0000 (10:00 -0700)]
net/ipv6: Fix index counter for unicast addresses in in6_dump_addrs
The loop wants to skip previously dumped addresses, so loops until
current index >= saved index. If the message fills it wants to save
the index for the next address to dump - ie., the one that did not
fit in the current message.
Currently, it is incrementing the index counter before comparing to the
saved index, and then the saved index is off by 1 - it assumes the
current address is going to fit in the message.
Change the index handling to increment only after a succesful dump.
Fixes: 502a2ffd7376a ("ipv6: convert idev_list to list macros")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wolfram Sang [Fri, 19 Oct 2018 19:15:26 +0000 (21:15 +0200)]
i2c: rcar: cleanup DMA for all kinds of failure
DMA needs to be cleaned up not only on timeout, but on all errors where
it has been setup before.
Fixes: 73e8b0528346 ("i2c: rcar: add DMA support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Kamal Dasu [Wed, 17 Oct 2018 16:05:09 +0000 (12:05 -0400)]
MAINTAINERS: Add entry for Broadcom STB I2C controller
Add an entry for the Broadcom STB I2C controller in the MAINTAINERS file.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
[wsa: fixed sorting and a whitespace error]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Greg Kroah-Hartman [Sat, 20 Oct 2018 13:04:23 +0000 (15:04 +0200)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Ingo writes:
"x86 fixes:
It's 4 misc fixes, 3 build warning fixes and 3 comment fixes.
In hindsight I'd have left out the 3 comment fixes to make the pull
request look less scary at such a late point in the cycle. :-/"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/swiotlb: Enable swiotlb for > 4GiG RAM on 32-bit kernels
x86/fpu: Fix i486 + no387 boot crash by only saving FPU registers on context switch if there is an FPU
x86/fpu: Remove second definition of fpu in __fpu__restore_sig()
x86/entry/64: Further improve paranoid_entry comments
x86/entry/32: Clear the CS high bits
x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS
x86/time: Correct the attribute on jiffies' definition
x86/entry: Add some paranoid entry/exit CR3 handling comments
x86/percpu: Fix this_cpu_read()
x86/tsc: Force inlining of cyc2ns bits
Greg Kroah-Hartman [Sat, 20 Oct 2018 13:03:45 +0000 (15:03 +0200)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Ingo writes:
"scheduler fixes:
Two fixes: a CFS-throttling bug fix, and an interactivity fix."
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix the min_vruntime update logic in dequeue_entity()
sched/fair: Fix throttle_list starvation with low CFS quota
Greg Kroah-Hartman [Sat, 20 Oct 2018 13:02:51 +0000 (15:02 +0200)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Ingo writes:
"perf fixes:
Misc perf tooling fixes."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Stop fallbacking to kallsyms for vdso symbols lookup
perf tools: Pass build flags to traceevent build
perf report: Don't crash on invalid inline debug information
perf cpu_map: Align cpu map synthesized events properly.
perf tools: Fix tracing_path_mount proper path
perf tools: Fix use of alternatives to find JDIR
perf evsel: Store ids for events with their own cpus perf_event__synthesize_event_update_cpus
perf vendor events intel: Fix wrong filter_band* values for uncore events
Revert "perf tools: Fix PMU term format max value calculation"
tools headers uapi: Sync kvm.h copy
tools arch uapi: Sync the x86 kvm.h copy
Dimitris Michailidis [Sat, 20 Oct 2018 00:07:13 +0000 (17:07 -0700)]
net: fix pskb_trim_rcsum_slow() with odd trim offset
We've been getting checksum errors involving small UDP packets, usually
59B packets with 1 extra non-zero padding byte. netdev_rx_csum_fault()
has been complaining that HW is providing bad checksums. Turns out the
problem is in pskb_trim_rcsum_slow(), introduced in commit
88078d98d1bb
("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends").
The source of the problem is that when the bytes we are trimming start
at an odd address, as in the case of the 1 padding byte above,
skb_checksum() returns a byte-swapped value. We cannot just combine this
with skb->csum using csum_sub(). We need to use csum_block_sub() here
that takes into account the parity of the start address and handles the
swapping.
Matches existing code in __skb_postpull_rcsum() and esp_remove_trailer().
Fixes: 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Sat, 20 Oct 2018 07:23:12 +0000 (09:23 +0200)]
Merge tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19 final (part 2)
Looked like two stragglers snuck in, one very urgent the pageflipping
was missing a reference that could result in a GPF on non-i915
drivers, the other is an overflow in the sun4i dotclock calcs
resulting in a mode not getting set."
* tag 'drm-fixes-2018-10-20-1' of git://anongit.freedesktop.org/drm/drm:
drm/sun4i: Fix an ulong overflow in the dotclock driver
drm: Get ref on CRTC commit object when waiting for flip_done
Greg Kroah-Hartman [Sat, 20 Oct 2018 07:20:48 +0000 (09:20 +0200)]
Merge tag 'trace-v4.19-rc8-2' of git://git./linux/kernel/git/rostedt/linux-trace
Steven writes:
"tracing: A few small fixes to synthetic events
Masami found some issues with the creation of synthetic events. The
first two patches fix handling of unsigned type, and handling of a
space before an ending semi-colon.
The third patch adds a selftest to test the processing of synthetic
events."
* tag 'trace-v4.19-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
selftests: ftrace: Add synthetic event syntax testcase
tracing: Fix synthetic event to allow semicolon at end
tracing: Fix synthetic event to accept unsigned modifier
Greg Kroah-Hartman [Sat, 20 Oct 2018 06:42:56 +0000 (08:42 +0200)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Dmitry writes:
"Input updates for 4.19-rc8
Just an addition to elan touchpad driver ACPI table."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15IGM
Dave Airlie [Fri, 19 Oct 2018 21:18:12 +0000 (07:18 +1000)]
Merge tag 'drm-misc-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Second pull request for v4.19:
- Fix ulong overflow in sun4i
- Fix a serious GPF in waiting for flip_done from commit_tail().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/97d1ed42-1d99-fcc5-291e-cd1dc29a4252@linux.intel.com
Masami Hiramatsu [Thu, 18 Oct 2018 13:13:02 +0000 (22:13 +0900)]
selftests: ftrace: Add synthetic event syntax testcase
Add a testcase to check the syntax and field types for
synthetic_events interface.
Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Thu, 18 Oct 2018 13:12:34 +0000 (22:12 +0900)]
tracing: Fix synthetic event to allow semicolon at end
Fix synthetic event to allow independent semicolon at end.
The synthetic_events interface accepts a semicolon after the
last word if there is no space.
# echo "myevent u64 var;" >> synthetic_events
But if there is a space, it returns an error.
# echo "myevent u64 var ;" > synthetic_events
sh: write error: Invalid argument
This behavior is difficult for users to understand. Let's
allow the last independent semicolon too.
Link: http://lkml.kernel.org/r/153986835420.18251.2191216690677025744.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa50 ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Thu, 18 Oct 2018 13:12:05 +0000 (22:12 +0900)]
tracing: Fix synthetic event to accept unsigned modifier
Fix synthetic event to accept unsigned modifier for its field type
correctly.
Currently, synthetic_events interface returns error for "unsigned"
modifiers as below;
# echo "myevent unsigned long var" >> synthetic_events
sh: write error: Invalid argument
This is because argv_split() breaks "unsigned long" into "unsigned"
and "long", but parse_synth_field() doesn't expected it.
With this fix, synthetic_events can handle the "unsigned long"
correctly like as below;
# echo "myevent unsigned long var" >> synthetic_events
# cat synthetic_events
myevent unsigned long var
Link: http://lkml.kernel.org/r/153986832571.18251.8448135724590496531.stgit@devbox
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: stable@vger.kernel.org
Fixes: commit 4b147936fa50 ("tracing: Add support for 'synthetic' events")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
David S. Miller [Fri, 19 Oct 2018 17:45:08 +0000 (10:45 -0700)]
Revert "bond: take rcu lock in netpoll_send_skb_on_dev"
This reverts commit
6fe9487892b32cb1c8b8b0d552ed7222a527fe30.
It is causing more serious regressions than the RCU warning
it is fixing.
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Fri, 19 Oct 2018 17:25:44 +0000 (19:25 +0200)]
Merge tag 'usb-4.19-final' of git://git./linux/kernel/git/gregkh/usb
I wrote:
"USB fixes for 4.19-final
Here are a small number of last-minute USB driver fixes
Included here are:
- spectre fix for usb storage gadgets
- xhci fixes
- cdc-acm fixes
- usbip fixes for reported problems
All of these have been in linux-next with no reported issues."
* tag 'usb-4.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: storage: Fix Spectre v1 vulnerability
USB: fix the usbfs flag sanitization for control transfers
usb: xhci: pci: Enable Intel USB role mux on Apollo Lake platforms
usb: roles: intel_xhci: Fix Unbalanced pm_runtime_enable
cdc-acm: correct counting of UART states in serial state notification
cdc-acm: do not reset notification buffer index upon urb unlinking
cdc-acm: fix race between reset and control messaging
usb: usbip: Fix BUG: KASAN: slab-out-of-bounds in vhci_hub_control()
selftests: usbip: add wait after attach and before checking port status
Greg Kroah-Hartman [Fri, 19 Oct 2018 16:51:07 +0000 (18:51 +0200)]
Merge tag 'for-linus-
20181019' of git://git.kernel.dk/linux-block
Jens writes:
"Block fixes for 4.19-final
Two small fixes that should go into this release."
* tag 'for-linus-
20181019' of git://git.kernel.dk/linux-block:
block: don't deal with discard limit in blkdev_issue_discard()
nvme: remove ns sibling before clearing path
Boris Brezillon [Thu, 18 Oct 2018 10:02:50 +0000 (12:02 +0200)]
drm/sun4i: Fix an ulong overflow in the dotclock driver
The calculated ideal rate can easily overflow an unsigned long, thus
making the best div selection buggy as soon as no ideal match is found
before the overflow occurs.
Fixes: 4731a72df273 ("drm/sun4i: request exact rates to our parents")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018100250.12565-1-boris.brezillon@bootlin.com
Greg Kroah-Hartman [Fri, 19 Oct 2018 07:16:20 +0000 (09:16 +0200)]
Merge git://git./linux/kernel/git/davem/net
David writes:
"Networking
1) Fix gro_cells leak in xfrm layer, from Li RongQing.
2) BPF selftests change RLIMIT_MEMLOCK blindly, don't do that. From
Eric Dumazet.
3) AF_XDP calls synchronize_net() under RCU lock, fix from Björn
Töpel.
4) Out of bounds packet access in _decode_session6(), from Alexei
Starovoitov.
5) Several ethtool bugs, where we copy a struct into the kernel twice
and our validations of the values in the first copy can be
invalidated by the second copy due to asynchronous updates to the
memory by the user. From Wenwen Wang.
6) Missing netlink attribute validation in cls_api, from Davide
Caratti.
7) LLC SAP sockets neet to be SOCK_RCU FREE, from Cong Wang.
8) rxrpc operates on wrong kvec, from Yue Haibing.
9) A regression was introduced by the disassosciation of route
neighbour references in rt6_probe(), causing probe for
neighbourless routes to not be properly rate limited. Fix from
Sabrina Dubroca.
10) Unsafe RCU locking in tipc, from Tung Nguyen.
11) Use after free in inet6_mc_check(), from Eric Dumazet.
12) PMTU from icmp packets should update the SCTP transport pathmtu,
from Xin Long.
13) Missing peer put on error in rxrpc, from David Howells.
14) Fix pedit in nfp driver, from Pieter Jansen van Vuuren.
15) Fix overflowing shift statement in qla3xxx driver, from Nathan
Chancellor.
16) Fix Spectre v1 in ptp code, from Gustavo A. R. Silva.
17) udp6_unicast_rcv_skb() interprets udpv6_queue_rcv_skb() return
value in an inverted manner, fix from Paolo Abeni.
18) Fix missed unresolved entries in ipmr dumps, from Nikolay
Aleksandrov.
19) Fix NAPI handling under high load, we can completely miss events
when NAPI has to loop more than one time in a cycle. From Heiner
Kallweit."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (49 commits)
ip6_tunnel: Fix encapsulation layout
tipc: fix info leak from kernel tipc_event
net: socket: fix a missing-check bug
net: sched: Fix for duplicate class dump
r8169: fix NAPI handling under high load
net: ipmr: fix unresolved entry dumps
net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
sctp: fix the data size calculation in sctp_data_size
virtio_net: avoid using netif_tx_disable() for serializing tx routine
udp6: fix encap return code for resubmitting
mlxsw: core: Fix use-after-free when flashing firmware during init
sctp: not free the new asoc when sctp_wait_for_connect returns err
sctp: fix race on sctp_id2asoc
r8169: re-enable MSI-X on RTL8168g
net: bpfilter: use get_pid_task instead of pid_task
ptp: fix Spectre v1 vulnerability
net: qla3xxx: Remove overflowing shift statement
geneve, vxlan: Don't set exceptions if skb->len < mtu
geneve, vxlan: Don't check skb_dst() twice
sctp: get pr_assoc and pr_stream all status with SCTP_PR_SCTP_ALL instead
...
Greg Kroah-Hartman [Fri, 19 Oct 2018 07:15:12 +0000 (09:15 +0200)]
Merge git://git./linux/kernel/git/davem/sparc
David writes:
"Sparc fixes:
The main bit here is fixing how fallback system calls are handled in
the sparc vDSO.
Unfortunately, I fat fingered the commit and some perf debugging
hacks slipped into the vDSO fix, which I revert in the very next
commit."
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: Revert unintended perf changes.
sparc: vDSO: Silence an uninitialized variable warning
sparc: Fix syscall fallback bugs in VDSO.
Greg Kroah-Hartman [Fri, 19 Oct 2018 06:31:22 +0000 (08:31 +0200)]
Merge tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm
Dave writes:
"drm fixes for 4.19 final
Just a last set of misc core fixes for final.
4 fixes, one use after free, one fb integration fix, one EDID fix,
and one laptop panel quirk,"
* tag 'drm-fixes-2018-10-19' of git://anongit.freedesktop.org/drm/drm:
drm/edid: VSDB yCBCr420 Deep Color mode bit definitions
drm: fix use of freed memory in drm_mode_setcrtc
drm: fb-helper: Reject all pixel format changing requests
drm/edid: Add 6 bpc quirk for BOE panel in HP Pavilion 15-n233sl
Greg Kroah-Hartman [Fri, 19 Oct 2018 06:30:35 +0000 (08:30 +0200)]
Merge tag 'for-gkh' of git://git./linux/kernel/git/rdma/rdma
Doug writes:
"Really final for-rc pull request for 4.19
Ok, so last week I thought we had sent our final pull request for
4.19. Well, wouldn't ya know someone went and found a couple Spectre
v1 fixes were needed :-/. So, a couple *very* small specter patches
for this (hopefully) final -rc week."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Fix Spectre v1 vulnerability
IB/ucm: Fix Spectre v1 vulnerability
Christoph Hellwig [Sun, 14 Oct 2018 07:52:08 +0000 (09:52 +0200)]
x86/swiotlb: Enable swiotlb for > 4GiG RAM on 32-bit kernels
We already build the swiotlb code for 32-bit kernels with PAE support,
but the code to actually use swiotlb has only been enabled for 64-bit
kernels for an unknown reason.
Before Linux v4.18 we paper over this fact because the networking code,
the SCSI layer and some random block drivers implemented their own
bounce buffering scheme.
[ mingo: Changelog fixes. ]
Fixes: 21e07dba9fb1 ("scsi: reduce use of block bounce buffers")
Fixes: ab74cfebafa3 ("net: remove the PCI_DMA_BUS_IS_PHYS check in illegal_highdma")
Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Matthew Whitehead <tedheadster@gmail.com>
Cc: konrad.wilk@oracle.com
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181014075208.2715-1-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Dave Airlie [Fri, 19 Oct 2018 03:51:55 +0000 (13:51 +1000)]
Merge tag 'drm-misc-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v4.19:
- Fix use of freed memory in drm_mode_setcrtc.
- Reject pixel format changing requests in fb helper.
- Add 6 bpc quirk for HP Pavilion 15-n233sl
- Fix VSDB yCBCr420 Deep Color mode bit definitions
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/647fe5d0-4ec5-57cc-9f23-a4836b29e278@linux.intel.com
Stefano Brivio [Thu, 18 Oct 2018 19:25:07 +0000 (21:25 +0200)]
ip6_tunnel: Fix encapsulation layout
Commit
058214a4d1df ("ip6_tun: Add infrastructure for doing
encapsulation") added the ip6_tnl_encap() call in ip6_tnl_xmit(), before
the call to ipv6_push_frag_opts() to append the IPv6 Tunnel Encapsulation
Limit option (option 4, RFC 2473, par. 5.1) to the outer IPv6 header.
As long as the option didn't actually end up in generated packets, this
wasn't an issue. Then commit
89a23c8b528b ("ip6_tunnel: Fix missing tunnel
encapsulation limit option") fixed sending of this option, and the
resulting layout, e.g. for FoU, is:
.-------------------.------------.----------.-------------------.----- - -
| Outer IPv6 Header | UDP header | Option 4 | Inner IPv6 Header | Payload
'-------------------'------------'----------'-------------------'----- - -
Needless to say, FoU and GUE (at least) won't work over IPv6. The option
is appended by default, and I couldn't find a way to disable it with the
current iproute2.
Turn this into a more reasonable:
.-------------------.----------.------------.-------------------.----- - -
| Outer IPv6 Header | Option 4 | UDP header | Inner IPv6 Header | Payload
'-------------------'----------'------------'-------------------'----- - -
With this, and with
84dad55951b0 ("udp6: fix encap return code for
resubmitting"), FoU and GUE work again over IPv6.
Fixes: 058214a4d1df ("ip6_tun: Add infrastructure for doing encapsulation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Maloy [Thu, 18 Oct 2018 15:38:29 +0000 (17:38 +0200)]
tipc: fix info leak from kernel tipc_event
We initialize a struct tipc_event allocated on the kernel stack to
zero to avert info leak to user space.
Reported-by: syzbot+057458894bc8cada4dee@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenwen Wang [Thu, 18 Oct 2018 14:36:46 +0000 (09:36 -0500)]
net: socket: fix a missing-check bug
In ethtool_ioctl(), the ioctl command 'ethcmd' is checked through a switch
statement to see whether it is necessary to pre-process the ethtool
structure, because, as mentioned in the comment, the structure
ethtool_rxnfc is defined with padding. If yes, a user-space buffer 'rxnfc'
is allocated through compat_alloc_user_space(). One thing to note here is
that, if 'ethcmd' is ETHTOOL_GRXCLSRLALL, the size of the buffer 'rxnfc' is
partially determined by 'rule_cnt', which is actually acquired from the
user-space buffer 'compat_rxnfc', i.e., 'compat_rxnfc->rule_cnt', through
get_user(). After 'rxnfc' is allocated, the data in the original user-space
buffer 'compat_rxnfc' is then copied to 'rxnfc' through copy_in_user(),
including the 'rule_cnt' field. However, after this copy, no check is
re-enforced on 'rxnfc->rule_cnt'. So it is possible that a malicious user
race to change the value in the 'compat_rxnfc->rule_cnt' between these two
copies. Through this way, the attacker can bypass the previous check on
'rule_cnt' and inject malicious data. This can cause undefined behavior of
the kernel and introduce potential security risk.
This patch avoids the above issue via copying the value acquired by
get_user() to 'rxnfc->rule_cn', if 'ethcmd' is ETHTOOL_GRXCLSRLALL.
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter [Thu, 18 Oct 2018 08:34:26 +0000 (10:34 +0200)]
net: sched: Fix for duplicate class dump
When dumping classes by parent, kernel would return classes twice:
| # tc qdisc add dev lo root prio
| # tc class show dev lo
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| # tc class show dev lo parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
| class prio 8001:1 parent 8001:
| class prio 8001:2 parent 8001:
| class prio 8001:3 parent 8001:
This comes from qdisc_match_from_root() potentially returning the root
qdisc itself if its handle matched. Though in that case, root's classes
were already dumped a few lines above.
Fixes: cb395b2010879 ("net: sched: optimize class dumps")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 18 Oct 2018 17:56:01 +0000 (19:56 +0200)]
r8169: fix NAPI handling under high load
rtl_rx() and rtl_tx() are called only if the respective bits are set
in the interrupt status register. Under high load NAPI may not be
able to process all data (work_done == budget) and it will schedule
subsequent calls to the poll callback.
rtl_ack_events() however resets the bits in the interrupt status
register, therefore subsequent calls to rtl8169_poll() won't call
rtl_rx() and rtl_tx() - chip interrupts are still disabled.
Fix this by calling rtl_rx() and rtl_tx() independent of the bits
set in the interrupt status register. Both functions will detect
if there's nothing to do for them.
Fixes: da78dbff2e05 ("r8169: remove work from irq handler.")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 Oct 2018 18:32:29 +0000 (11:32 -0700)]
sparc: Revert unintended perf changes.
Some local debugging hacks accidently slipped into the VDSO commit.
Sorry!
Signed-off-by: David S. Miller <davem@davemloft.net>
Leo Li [Mon, 15 Oct 2018 13:46:40 +0000 (09:46 -0400)]
drm: Get ref on CRTC commit object when waiting for flip_done
This fixes a general protection fault, caused by accessing the contents
of a flip_done completion object that has already been freed. It occurs
due to the preemption of a non-blocking commit worker thread W by
another commit thread X. X continues to clear its atomic state at the
end, destroying the CRTC commit object that W still needs. Switching
back to W and accessing the commit objects then leads to bad results.
Worker W becomes preemptable when waiting for flip_done to complete. At
this point, a frequently occurring commit thread X can take over. Here's
an example where W is a worker thread that flips on both CRTCs, and X
does a legacy cursor update on both CRTCs:
...
1. W does flip work
2. W runs commit_hw_done()
3. W waits for flip_done on CRTC 1
4. > flip_done for CRTC 1 completes
5. W finishes waiting for CRTC 1
6. W waits for flip_done on CRTC 2
7. > Preempted by X
8. > flip_done for CRTC 2 completes
9. X atomic_check: hw_done and flip_done are complete on all CRTCs
10. X updates cursor on both CRTCs
11. X destroys atomic state
12. X done
13. > Switch back to W
14. W waits for flip_done on CRTC 2
15. W raises general protection fault
The error looks like so:
general protection fault: 0000 [#1] PREEMPT SMP PTI
**snip**
Call Trace:
lock_acquire+0xa2/0x1b0
_raw_spin_lock_irq+0x39/0x70
wait_for_completion_timeout+0x31/0x130
drm_atomic_helper_wait_for_flip_done+0x64/0x90 [drm_kms_helper]
amdgpu_dm_atomic_commit_tail+0xcae/0xdd0 [amdgpu]
commit_tail+0x3d/0x70 [drm_kms_helper]
process_one_work+0x212/0x650
worker_thread+0x49/0x420
kthread+0xfb/0x130
ret_from_fork+0x3a/0x50
Modules linked in: x86_pkg_temp_thermal amdgpu(O) chash(O)
gpu_sched(O) drm_kms_helper(O) syscopyarea sysfillrect sysimgblt
fb_sys_fops ttm(O) drm(O)
Note that i915 has this issue masked, since hw_done is signaled after
waiting for flip_done. Doing so will block the cursor update from
happening until hw_done is signaled, preventing the cursor commit from
destroying the state.
v2: The reference on the commit object needs to be obtained before
hw_done() is signaled, since that's the point where another commit
is allowed to modify the state. Assuming that the
new_crtc_state->commit object still exists within flip_done() is
incorrect.
Fix by getting a reference in setup_commit(), and releasing it
during default_clear().
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1539611200-6184-1-git-send-email-sunpeng.li@amd.com
David S. Miller [Thu, 18 Oct 2018 16:55:08 +0000 (09:55 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-10-18
1) Free the xfrm interface gro_cells when deleting the
interface, otherwise we leak it. From Li RongQing.
2) net/core/flow.c does not exist anymore, so remove it
from the MAINTAINERS file.
3) Fix a slab-out-of-bounds in _decode_session6.
From Alexei Starovoitov.
4) Fix RCU protection when policies inserted into
thei bydst lists. From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ming Lei [Fri, 12 Oct 2018 07:53:10 +0000 (15:53 +0800)]
block: don't deal with discard limit in blkdev_issue_discard()
blk_queue_split() does respect this limit via bio splitting, so no
need to do that in blkdev_issue_discard(), then we can align to
normal bio submit(bio_add_page() & submit_bio()).
More importantly, this patch fixes one issue introduced in
a22c4d7e34402cc
("block: re-add discard_granularity and alignment checks"), in which
zero discard bio may be generated in case of zero alignment.
Fixes: a22c4d7e34402ccdf3 ("block: re-add discard_granularity and alignment checks")
Cc: stable@vger.kernel.org
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Tested-by: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eric Sandeen [Wed, 17 Oct 2018 14:23:59 +0000 (15:23 +0100)]
fscache: Fix out of bound read in long cookie keys
fscache_set_key() can incur an out-of-bounds read, reported by KASAN:
BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x5b3/0x680 [fscache]
Read of size 4 at addr
ffff88084ff056d4 by task mount.nfs/32615
and also reported by syzbot at https://lkml.org/lkml/2018/7/8/236
BUG: KASAN: slab-out-of-bounds in fscache_set_key fs/fscache/cookie.c:120 [inline]
BUG: KASAN: slab-out-of-bounds in fscache_alloc_cookie+0x7a9/0x880 fs/fscache/cookie.c:171
Read of size 4 at addr
ffff8801d3cc8bb4 by task syz-executor907/4466
This happens for any index_key_len which is not divisible by 4 and is
larger than the size of the inline key, because the code allocates exactly
index_key_len for the key buffer, but the hashing loop is stepping through
it 4 bytes (u32) at a time in the buf[] array.
Fix this by calculating how many u32 buffers we'll need by using
DIV_ROUND_UP, and then using kcalloc() to allocate a precleared allocation
buffer to hold the index_key, then using that same count as the hashing
index limit.
Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 17 Oct 2018 14:23:45 +0000 (15:23 +0100)]
fscache: Fix incomplete initialisation of inline key space
The inline key in struct rxrpc_cookie is insufficiently initialized,
zeroing only 3 of the 4 slots, therefore an index_key_len between 13 and 15
bytes will end up hashing uninitialized memory because the memcpy only
partially fills the last buf[] element.
Fix this by clearing fscache_cookie objects on allocation rather than using
the slab constructor to initialise them. We're going to pretty much fill
in the entire struct anyway, so bringing it into our dcache writably
shouldn't incur much overhead.
This removes the need to do clearance in fscache_set_key() (where we aren't
doing it correctly anyway).
Also, we don't need to set cookie->key_len in fscache_set_key() as we
already did it in the only caller, so remove that.
Fixes: ec0328e46d6e ("fscache: Maintain a catalogue of allocated cookies")
Reported-by: syzbot+a95b989b2dde8e806af8@syzkaller.appspotmail.com
Reported-by: Eric Sandeen <sandeen@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Wed, 17 Oct 2018 14:23:26 +0000 (15:23 +0100)]
cachefiles: fix the race between cachefiles_bury_object() and rmdir(2)
the victim might've been rmdir'ed just before the lock_rename();
unlike the normal callers, we do not look the source up after the
parents are locked - we know it beforehand and just recheck that it's
still the child of what used to be its parent. Unfortunately,
the check is too weak - we don't spot a dead directory since its
->d_parent is unchanged, dentry is positive, etc. So we sail all
the way to ->rename(), with hosting filesystems _not_ expecting
to be asked renaming an rmdir'ed subdirectory.
The fix is easy, fortunately - the lock on parent is sufficient for
making IS_DEADDIR() on child safe.
Cc: stable@vger.kernel.org
Fixes: 9ae326a69004 (CacheFiles: A cache that backs onto a mounted filesystem)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Fri, 12 Oct 2018 22:22:59 +0000 (15:22 -0700)]
mremap: properly flush TLB before releasing the page
Jann Horn points out that our TLB flushing was subtly wrong for the
mremap() case. What makes mremap() special is that we don't follow the
usual "add page to list of pages to be freed, then flush tlb, and then
free pages". No, mremap() obviously just _moves_ the page from one page
table location to another.
That matters, because mremap() thus doesn't directly control the
lifetime of the moved page with a freelist: instead, the lifetime of the
page is controlled by the page table locking, that serializes access to
the entry.
As a result, we need to flush the TLB not just before releasing the lock
for the source location (to avoid any concurrent accesses to the entry),
but also before we release the destination page table lock (to avoid the
TLB being flushed after somebody else has already done something to that
page).
This also makes the whole "need_flush" logic unnecessary, since we now
always end up flushing the TLB for every valid entry.
Reported-and-tested-by: Jann Horn <jannh@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Hellwig [Thu, 18 Oct 2018 06:22:39 +0000 (08:22 +0200)]
LICENSES: Remove CC-BY-SA-4.0 license text
Using non-GPL licenses for our documentation is rather problematic,
as it can directly include other files, which generally are GPLv2
licensed and thus not compatible.
Remove this license now that the only user (idr.rst) is gone to avoid
people semi-accidentally using it again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 18 Oct 2018 09:24:32 +0000 (11:24 +0200)]
Merge branch 'ida-fixes-4.19-rc8' of git://git.infradead.org/users/willy/linux-dax
Matthew writes:
"IDA/IDR fixes for 4.19
I have two tiny fixes, one for the IDA test-suite and one for the IDR
documentation license."
* 'ida-fixes-4.19-rc8' of git://git.infradead.org/users/willy/linux-dax:
idr: Change documentation license
test_ida: Fix lockdep warning
Ingo Molnar [Thu, 18 Oct 2018 05:41:29 +0000 (07:41 +0200)]
Merge tag 'perf-urgent-for-mingo-4.19-
20181017' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Stop falling back to kallsyms for vDSO symbols lookup, this wasn't
being really used and is not valid in arches such as Sparc, where
user and kernel space don't share the address space, relying only on
cpumode to figure out what DSOs to lookup (Arnaldo Carvalho de Melo)
- Align CPU map synthesized events properly, fixing SIGBUS in
CPUs like Sparc (David Miller)
- Fix use of alternatives to find JDIR (Jarod Wilson)
- Store IDs for events with their own CPUs when synthesizing user
level event details (scale, unit, etc) events, fixing a crash
when recording a PMU event with a cpumask defined (Jiri Olsa)
- Fix wrong filter_band* values for uncore Intel vendor events (Jiri Olsa)
- Fix detection of tracefs path in systems without tracefs, where
that path should be the debugfs mountpoint plus "/tracing/" (Jiri Olsa)
- Pass build flags to traceevent build, allowing using alternative
flags in distro packages, RPM, for instance (Jiri Olsa)
- Fix 'perf report' crash on invalid inline debug information (Milian Wolff)
- Synch KVM UAPI copies (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nikolay Aleksandrov [Wed, 17 Oct 2018 19:34:34 +0000 (22:34 +0300)]
net: ipmr: fix unresolved entry dumps
If the skb space ends in an unresolved entry while dumping we'll miss
some unresolved entries. The reason is due to zeroing the entry counter
between dumping resolved and unresolved mfc entries. We should just
keep counting until the whole table is dumped and zero when we move to
the next as we have a separate table counter.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: 8fb472c09b9d ("ipmr: improve hash scalability")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gregory CLEMENT [Wed, 17 Oct 2018 15:26:35 +0000 (17:26 +0200)]
net: mscc: ocelot: Fix comment in ocelot_vlant_wait_for_completion()
The ocelot_vlant_wait_for_completion() function is very similar to the
ocelot_mact_wait_for_completion(). It seemed to have be copied but the
comment was not updated, so let's fix it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 17 Oct 2018 13:11:27 +0000 (21:11 +0800)]
sctp: fix the data size calculation in sctp_data_size
sctp data size should be calculated by subtracting data chunk header's
length from chunk_hdr->length, not just data header.
Fixes: 668c9beb9020 ("sctp: implement assign_number for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ake Koomsin [Wed, 17 Oct 2018 10:44:12 +0000 (19:44 +0900)]
virtio_net: avoid using netif_tx_disable() for serializing tx routine
Commit
713a98d90c5e ("virtio-net: serialize tx routine during reset")
introduces netif_tx_disable() after netif_device_detach() in order to
avoid use-after-free of tx queues. However, there are two issues.
1) Its operation is redundant with netif_device_detach() in case the
interface is running.
2) In case of the interface is not running before suspending and
resuming, the tx does not get resumed by netif_device_attach().
This results in losing network connectivity.
It is better to use netif_tx_lock_bh()/netif_tx_unlock_bh() instead for
serializing tx routine during reset. This also preserves the symmetry
of netif_device_detach() and netif_device_attach().
Fixes commit
713a98d90c5e ("virtio-net: serialize tx routine during reset")
Signed-off-by: Ake Koomsin <ake@igel.co.jp>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>