Abhishek Sansanwal [Mon, 10 Apr 2017 06:38:14 +0000 (12:08 +0530)]
Remove old IP and gateway address
Change-Id: I61defbc6fba37e7c3a04516d1946f2b5cd22af1a
Signed-off-by: Abhishek Sansanwal <abhishek.s94@samsung.com>
taesub kim [Thu, 6 Apr 2017 01:58:07 +0000 (18:58 -0700)]
Merge "[connman] Added DBus method to get scanning status." into tizen
Eun Chul Kim [Mon, 27 Feb 2017 06:57:08 +0000 (15:57 +0900)]
apply upstream fixes
- Replace g_timeout_add_seconds() with 0 as timeout to g_idle_add()
- gdhcp: Set T1 and T2 to infinite if expiry time is infinite
- dhcpv6: Return -EISCONN when the expiry time is inifinite
Change-Id: I59ddd9b4c2d1af0f1ee8898381bc0372fba8e8ad
Seonah Moon [Thu, 30 Mar 2017 06:09:55 +0000 (15:09 +0900)]
Removed unnecessary logs
Change-Id: Ia9688dbfa5bd0b2e5f917003c6d5825e2e4c7b5f
Seonah Moon [Tue, 28 Mar 2017 10:10:06 +0000 (19:10 +0900)]
Added license file to all of rpms
Change-Id: If430d988dba90c1080ceec280e2a31dd15d96312
taesub kim [Tue, 28 Mar 2017 09:30:43 +0000 (02:30 -0700)]
Merge "Fix to prevent RA message processing" into tizen
taesub kim [Tue, 28 Mar 2017 09:30:24 +0000 (02:30 -0700)]
Merge "[upstream patch] dhcp: Remove the possible remaining dhcp_retry_cb timer" into tizen
taesub kim [Tue, 28 Mar 2017 08:41:45 +0000 (01:41 -0700)]
Merge "Modified the DHCP descover/request timeout and disable DHCP reququest for last address" into tizen
Niraj Kumar Goit [Fri, 24 Mar 2017 04:25:24 +0000 (09:55 +0530)]
[connman] Configure IPv6 after IPv4 dhcp succeed.
To speed up Wi-Fi connection modified IP configuration logic in connman.
Start IPv6 configuration once IPv4 dhcp configuration succeed.
Change-Id: I8a33d533f36b42fa0b7450f3b34a5d2238d06e49
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
taesub kim [Tue, 28 Mar 2017 07:16:21 +0000 (16:16 +0900)]
Modified the DHCP descover/request timeout and disable DHCP reququest for last address
(DHCP discovery) wlan0 retry timeout=1sec retries=15
(DHCP request) retry timeout=1sec
Change-Id: I28b8f8361dcf2c8cff7f3084c47707f05bc0da64
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
Seonah Moon [Tue, 28 Mar 2017 02:29:08 +0000 (11:29 +0900)]
Fix to prevent RA message processing
Added fix to prevent RA message processing pass by kernel via
RTM_NEDNDUSEROPT if ipv6 DNS method is set as manual.
Change-Id: Ibee486071e5a235a1426028f107e105920499c6e
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Seonah Moon [Mon, 27 Mar 2017 08:35:57 +0000 (17:35 +0900)]
[upstream patch] dhcp: Remove the possible remaining dhcp_retry_cb timer
Change-Id: I9759e546298a5ae5cdfccfd629512f475e9ec2e8
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
taesub kim [Fri, 24 Mar 2017 04:30:20 +0000 (21:30 -0700)]
Merge "Consider ipconfig method in clearing association state" into tizen
Seonah Moon [Thu, 23 Mar 2017 01:54:13 +0000 (10:54 +0900)]
Consider ipconfig method in clearing association state
Change-Id: I94f5a1f26140ea2c1edfdb1d9dd191435757802b
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Seonah Moon [Wed, 22 Mar 2017 06:42:31 +0000 (15:42 +0900)]
Changed the path of license by using '%license' macro
Change-Id: I009433c56b7c9e12223d31d8dfe3587e9fdd03eb
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Niraj Kumar Goit [Mon, 20 Mar 2017 14:39:02 +0000 (20:09 +0530)]
[connman] Added DBus method to get scanning status.
Change-Id: Ib84cb1c218b6c468ffe413b63af2fe7a33c2a63e
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
taesub kim [Wed, 22 Mar 2017 06:34:02 +0000 (23:34 -0700)]
Merge "When scan is started send signal ScanStarted to application." into tizen
Seonah Moon [Tue, 14 Mar 2017 10:31:33 +0000 (19:31 +0900)]
Apply DNS configuration method
Change-Id: If16e739fde7e9d736c66015ab1efa982e49d3482
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Niraj Kumar Goit [Fri, 10 Mar 2017 10:37:46 +0000 (16:07 +0530)]
When scan is started send signal ScanStarted to application.
Change-Id: I034c3317a346140006e1d23d1389894c867012cc
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 8 Mar 2017 04:03:48 +0000 (09:33 +0530)]
[connman] Add IPv6 gateway address after service IP bound.
Add IPv6 gateway address after service IP bound to fix
state flow issue.
Change-Id: Ia30a834f52c7d849ee54305d0d370f629fc506bb
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
taesub kim [Fri, 3 Mar 2017 00:45:31 +0000 (16:45 -0800)]
Merge "[tizen 4.0]: Add support of Disconnect Reason Event Handler" into tizen
Seonah Moon [Wed, 22 Feb 2017 10:59:28 +0000 (19:59 +0900)]
DHCP: Use auto-generated IP when DHCP is failed
Change-Id: I1051fc5506c816150bea4d65c93a0e2877d375d3
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Seonah Moon [Mon, 20 Feb 2017 10:36:21 +0000 (19:36 +0900)]
[connman] Merged IPv6 related code.
1. Added code to set IPv6 gateway addess.
2. Fix IPv6 issue in case of auto-configuration.
Change-Id: Ie0e1d53dd269a09600d2f08e66d73cefd6dd3c29
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Seonah Moon [Mon, 20 Feb 2017 10:23:57 +0000 (19:23 +0900)]
Supported IPv6 DNS query
connman dnsproxy has ignored AAAA record for IPv6.
It makes fail to resolve DNS in IPv6 environment.
Change-Id: I11e83560c522377b2f88c0dfea28df0fb66140a8
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
Maneesh Jain [Thu, 16 Feb 2017 11:34:14 +0000 (17:04 +0530)]
[tizen 4.0]: Add support of Disconnect Reason Event Handler
Description: Merged the following upstream patch and modified the
connMan accordingly.
http://git.kernel.org/cgit/network/connman/connman.git/commit/?id=
6245582d0dc9a3f47a6880dabf437ee7c351caef
Change-Id: Id90b6d83849c62c2842c038aec516354a2b74060
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
Seonah Moon [Fri, 10 Feb 2017 08:48:30 +0000 (17:48 +0900)]
WGID-149077: Fixed integer overflow issue
Change-Id: Ie2d0939e43080aa2c7937f912d13ece6c39fdb9c
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
taesub kim [Tue, 7 Feb 2017 12:02:11 +0000 (04:02 -0800)]
Merge "Do not listen all of 53 ports for DNS proxy" into tizen
Seonah Moon [Tue, 7 Feb 2017 10:40:56 +0000 (19:40 +0900)]
Do not listen all of 53 ports for DNS proxy
0:0:0:0 means all of IPv6 addresses.
It should be replaced with localhost.
Change-Id: I21ace9e0eb5c50903f7b03ec270cbef0c8776aa3
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
taesub kim [Tue, 7 Feb 2017 10:24:21 +0000 (02:24 -0800)]
Merge "[connman]: Fixed: ConnMan keep trying connection infintely" into tizen
taesub kim [Tue, 7 Feb 2017 10:22:04 +0000 (02:22 -0800)]
Merge "Fix for single channel scan in SelectNetwork" into tizen
MyungJoo Ham [Wed, 30 Nov 2016 12:00:08 +0000 (21:00 +0900)]
Remove Profile Build Dependency (2/2): tv/ivi extension
- This is for Tizen 4.0.
: Tizen 4.0 Configurability and Build Blocks require
to remove all profile-depending build options in spec files.
(No More profile macros)
- Maintainers need to create JIRA-TRE issue when SR-ing this:
- Add connman-profile_tv for tv profile
- Add connman-profile_ivi for ivi profile
Change-Id: Ic2c6022b389444fd26c7f9ee20290f50b38b5434
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
MyungJoo Ham [Wed, 30 Nov 2016 11:37:10 +0000 (20:37 +0900)]
Remove Profile Build Dependency (1/2): do it at runtime
- This is for Tizen 4.0.
: Tizen 4.0 Configurability and Build Blocks require
to remove all profile-depending build options in spec files.
(No More profile macros)
- It is recommended to distinguish features/profiles at runtime.
unless it incurs too much overhead, which requires you to
create multiple binaries and subpackages.
- Now it reads if it is TV based on the /etc/ conf file.
Change-Id: Id9d2f6e9db7814ab06f5d166ef2299a1a8aacb51
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Yu Jiung [Tue, 17 Jan 2017 10:39:58 +0000 (19:39 +0900)]
Fix service file for TV profile referring to mobile one
Change-Id: I683d96bef1b08acdd42bddf6eeedc659baad5d01
Signed-off-by: Yu jiung <jiung.yu@samsung.com>
taesub kim [Thu, 12 Jan 2017 05:02:44 +0000 (14:02 +0900)]
Fix for single channel scan in SelectNetwork
Change-Id: I165fd22bab5ced4a383b0034da79a87712110636
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
Maneesh Jain [Thu, 22 Dec 2016 13:00:28 +0000 (18:30 +0530)]
[connman]: Fixed: ConnMan keep trying connection infintely
Description : In following use case, ConnMan was stuck in
auto-connection with a specific AP. In that time, user
could not be able to select any other AP for connection.
1. Connect with an AP
2. Add the Device Mac address in AP's Mac filter list
3. Device disconnect from AP
4. Device keep trying to connection with AP
Partially added following upstream patch.
"http://git.kernel.org/cgit/network/connman/connman.git/commit/?id=
3bda07204b11158dd18322db6e64dc92bdd07124"
Change-Id: I1731bfd21324c83a87f4ff2a5fccf264fd7883f5
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
hyunuktak [Mon, 26 Dec 2016 05:37:16 +0000 (14:37 +0900)]
Fix to check favorit value into service
When AP's status is changed(ex, password),
favorite value is setted to false.
so it is returning false as not supported
with checking favorite and state of service
when remove profile mothod is called.
it should remove service profile
whether it is favorite or not,
when it's called explicit.
Change-Id: I6b59729c7c2614b9f25f56696463f4ac927f6809
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
Maneesh Jain [Wed, 21 Dec 2016 13:39:31 +0000 (19:09 +0530)]
[connman]: @fix WGID 166257 SVACE Issue
Change-Id: Ib9186009728b786bc1c5c848a529e67af4752a1e
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
cheoleun moon [Wed, 21 Dec 2016 01:15:16 +0000 (17:15 -0800)]
Merge "[connman]:Fixed Double Scan Indication Event" into tizen
taesub kim [Mon, 19 Dec 2016 05:45:12 +0000 (14:45 +0900)]
Clear scanning flag & device when state is connected
http://slp-info.sec.samsung.net/gerrit/#/c/2752007/
http://slp-info.sec.samsung.net/gerrit/#/c/2763075/
Change-Id: Ia290ba7d4d50935c1473d8a864a508dbad3f5e90
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
Maneesh Jain [Tue, 13 Dec 2016 11:31:56 +0000 (17:01 +0530)]
[connman]:Fixed Double Scan Indication Event
Description: In specific case, CommMan issue the SSID based scan followed
by full channel scan. In that case, applicaiton receive the two scan
done event. To handle this , block the scan done event for SSID based
scan.
Change-Id: I24803bd7377e3c682a33b0be653c36c65d30186e
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
hyunuktak [Mon, 12 Dec 2016 09:25:33 +0000 (18:25 +0900)]
Fix a svace for checking NULL
Change-Id: I91b9b29c1c1c2b0b835f5a9b81a23b48fbd3b5dc
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
hyunuktak [Fri, 9 Dec 2016 01:20:27 +0000 (10:20 +0900)]
Renamed upgrade script file name
Change-Id: Id143c354d3ca8240da608aae2bcb07957b856dde
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
Jaehyun Kim [Thu, 8 Dec 2016 09:53:58 +0000 (01:53 -0800)]
Merge "Fix build error for common 64bit Emulator" into tizen
taesub kim [Wed, 7 Dec 2016 02:55:54 +0000 (11:55 +0900)]
Fix build error for common 64bit Emulator
Change-Id: I6d6c8e40fa78509599c5fcdf557705e41c138ff4
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
Niraj Kumar Goit [Tue, 6 Dec 2016 05:03:53 +0000 (10:33 +0530)]
[connman] Added wifi connection when invalid-key error occurred.
When invalid-key error occurs users need to enter the valid
password to connect with Wi-Fi AP.
Change-Id: I7dd56186b09060bfad920721316b7b8ccb64e844
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Saurav Babu [Thu, 17 Nov 2016 11:30:40 +0000 (17:00 +0530)]
[connman] Add new ScanDone signal for notification to upper layer
Change-Id: I1c6f5d7a162ef7da9942ae41cdbbf64017b37aab
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
Saurav Babu [Tue, 25 Oct 2016 09:33:05 +0000 (15:03 +0530)]
Block AutoConnect when hidden connection is in progress
Change-Id: Ic57315b49190a8c8f55ff3bc8f5aa006d2a2d915
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
Saurav Babu [Mon, 24 Oct 2016 10:02:09 +0000 (15:32 +0530)]
Remove Tizen specific hidden connection logic
Change-Id: I0f485580bd16234fe371e0cfb153d9f1cc23dbcc
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
Saurav Babu [Thu, 17 Nov 2016 09:53:28 +0000 (15:23 +0530)]
[connman] AutoConnect to old service when connection to new service fails
In the following scenario:
1. Device is connected to AP1.
2. Connection requested initiated with AP2.
AP1 gets disconnected and device initiates connection with AP2. If
connection with AP2 fails(like invalid key, dhcp-failed error) then
device should auto connect to AP1.
This patch initiates auto connect to last connected AP's
Change-Id: Iad5c4cf50da7a91869994abc133b24d66c99b0bc
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
Saurav Babu [Thu, 17 Nov 2016 06:21:03 +0000 (11:51 +0530)]
Fixed connman crash due to memory corruption
Change-Id: Ic9416b95f7c070564c8c9956a12932d1122d7734
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
seonah moon [Wed, 16 Nov 2016 01:42:25 +0000 (17:42 -0800)]
Revert "Change attribute for connmand and set uid/gid into service"
This reverts commit
04bfa23db4a121adcd17c35bb1d9378cebc66b51.
Change-Id: I1af9c34aed1496757f20cf1dc0411afc744bc990
hyunuktak [Tue, 30 Aug 2016 05:08:16 +0000 (14:08 +0900)]
Change attribute for connmand and set uid/gid into service
Change-Id: I7c89d697792aff2521a31d1772e696c19313fc44
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
hyunuktak [Thu, 27 Oct 2016 08:14:47 +0000 (17:14 +0900)]
Added timeserver init/cleanup function to main
Change-Id: Ib06eabea5bd6813efc1f9f59e8db03380e5604ac
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
cheoleun moon [Tue, 11 Oct 2016 08:26:38 +0000 (01:26 -0700)]
Merge "Spec: Add eth0 device as NetworkInterfaceBlacklist in ivi profile." into tizen
Sangjung Woo [Mon, 10 Oct 2016 11:48:45 +0000 (20:48 +0900)]
Spec: Add eth0 device as NetworkInterfaceBlacklist in ivi profile.
In order to communicate with Cluster device, this patch set eth0 as
NetworkInterfaceBlacklist member in connman configuration. This patch is
only applied for ivi profile.
Change-Id: If340dda5702973b470a78375370bc43180b2b53a
Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
hyunuktak [Mon, 10 Oct 2016 09:50:50 +0000 (18:50 +0900)]
Modify dbus conf file as policy
Change-Id: I7238ffe3c28d499e7561d2b0986c1e51c72d9cbe
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
cheoleun moon [Thu, 6 Oct 2016 01:01:29 +0000 (18:01 -0700)]
Merge "[connman]: Fixed Scan Issue" into tizen
Maneesh Jain [Thu, 29 Sep 2016 09:13:12 +0000 (14:43 +0530)]
[connman]: Fixed Scan Issue
Description: In following use case, ConnMan always perform the ssid based scan
and unable to find the new AP's.
a. Connect with any AP (Normal or Hidden)
b. Disconnect with AP
c. After this, ConnMan always perform the SSID based scan.
Impact: Tizen Device is unable to scan new AP's.
Reason:
In Tizen, ConnMan configure the "BackgroundScanning" flag as false because background
scan feature is implemented in net-config module.
Due to this reason, I have added patch to sync-up the ConnMan scan implementation
with net-config background scan feature.
Change-Id: I0cff11df18780816b5f61a647c2298c781e78557
Signed-off-by: Maneesh Jain <maneesh.jain@samsung.com>
taesub kim [Thu, 29 Sep 2016 00:45:43 +0000 (17:45 -0700)]
Revert "Remove Tizen specific hidden connection logic"
This reverts commit
7ace8c778781a6d3e47010843d9bc5c0d337594d.
Change-Id: Ia05ae51984781af64d3225ac302bdfb24df37263
Saurav Babu [Mon, 26 Sep 2016 12:06:23 +0000 (17:36 +0530)]
Remove Tizen specific hidden connection logic
Change-Id: I466d0a4d73ade1278211245fbc94ca2fffeb392f
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
cheoleun moon [Mon, 12 Sep 2016 08:38:32 +0000 (01:38 -0700)]
Merge "Append bssid property to the add_network call to wpa_supplicant" into tizen
taesub.kim [Thu, 8 Sep 2016 05:18:55 +0000 (14:18 +0900)]
Disable the rfkill init/clean
Change-Id: Ifdb6258e566469c179e0a4f1610247e5109e1b21
Signed-off-by: Taesub Kim <taesub.kim@samsung.com>
Milind Ramesh Murhekar [Wed, 7 Sep 2016 09:07:07 +0000 (14:37 +0530)]
Append bssid property to the add_network call to wpa_supplicant
Description: This change supports the Strongest AP connection.
If there are multiple APs that have same SSID and security type
the Bssid property will help to ensure the correct connectivity
of the AP among them.
Change-Id: I600772fa2bea72f3917e24d677057b34b87c7f1e
Signed-off-by: Milind Ramesh Murhekar <m.murhekar@samsung.com>
Saurav Babu [Mon, 18 Jul 2016 11:13:53 +0000 (16:43 +0530)]
Upstream: service: Enable ipconfig only for the changed IP type
When IPv6.Configuration is changed to "off" then connman starts fresh
DHCP Requests for service after changing its state to Configuration.
In an ideal scenario IPv4 Configurations should not be affected on
changing IPv6.Configuration property.
This patch only enables ipconfig for the changed IP type and leaves
other IP type unchanged
Change-Id: I65eacb6711314d2674e709711f432ef706167fc4
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
hyunuktak [Mon, 29 Aug 2016 04:13:35 +0000 (13:13 +0900)]
Add script file for OS upgrade
Change-Id: I67fbc8121de8e928ff16c3bd05b7a8f56133a616
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
Jaehyun Kim [Fri, 19 Aug 2016 10:31:54 +0000 (19:31 +0900)]
Move log file to /var/log
Change-Id: I2b304a8557e68dbcd372050c44e68d22341ad0f2
Seonah Moon [Wed, 10 Aug 2016 02:20:22 +0000 (11:20 +0900)]
Add socket file to enable DNS proxy
Change-Id: I9e04465f130cfee07678046660ca9292a2385dec
Signed-off-by: Seonah Moon <seonah1.moon@samsung.com>
taesub kim [Thu, 21 Jul 2016 23:10:59 +0000 (16:10 -0700)]
Merge "Call g_supplicant_interface_scan with scan_params" into tizen
taesub kim [Thu, 21 Jul 2016 23:10:27 +0000 (16:10 -0700)]
Merge "Upstream: network: Replace network_change() with __connman_network_disconnect()" into tizen
Yunjin Lee [Wed, 20 Jul 2016 12:02:30 +0000 (21:02 +0900)]
Set SmackProcessLabel to System
Change-Id: I233c41596ec8fb4424e18c80e043658f3d510d47
Signed-off-by: Yunjin Lee <yunjin-.lee@samsung.com>
Saurav Babu [Thu, 7 Jul 2016 14:22:45 +0000 (19:52 +0530)]
Upstream: network: Replace network_change() with __connman_network_disconnect()
The network_change() function called when a network error is set will
disconnect a network driver identical to __connman_network_disconnect()
but without any error handling. Therefore the specific network_change()
function is better replaced with __connman_network_disconnect(). With
connman_network_set_error() now calling __connman_network_disconnect(),
the additional function call can now be removed from
connman_network_set_connected().
Also let the associating and connecting variables be handled by the
normal code paths and don't forcefully unset them when an error happens.
Commit ID:
7a3740c4c65be7915c36daaac9b1a611fa498a2
Change-Id: I3223a9d13207898aa64e2002912516d5ad64c150
Signed-off-by: Saurav Babu <saurav.babu@samsung.com>
hyunuktak [Wed, 6 Jul 2016 04:07:05 +0000 (13:07 +0900)]
Call g_supplicant_interface_scan with scan_params
when latest connection is specific ssid as hidden
Change-Id: Id5a58977ac3dcb05f3006dbed85d3e07aab15326
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
cheoleun moon [Wed, 6 Jul 2016 01:43:14 +0000 (18:43 -0700)]
Merge "Removed cap for mac override and change the label for connman dir" into tizen
hyunuktak [Tue, 5 Jul 2016 06:08:44 +0000 (15:08 +0900)]
Fixed some issues
Removed to set autoconnect when 4way handshake failed
Release passphrase of service when indicate error occurred for invalid
key
Change-Id: Id748ddcd21ad896f0d8e91ce4711a4c9c0df6d96
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
hyunuktak [Mon, 4 Jul 2016 02:28:07 +0000 (11:28 +0900)]
Removed cap for mac override and change the label for connman dir
Change-Id: I070677e1e3197ec0076483078b7bbdb8fd253023
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
Jaehyun Kim [Fri, 1 Jul 2016 11:09:04 +0000 (20:09 +0900)]
Revert "Removed cap for mac override and change the label for connman dir"
Change-Id: Ibfa947b0d6d9ae3154bca8774378908cf93c841e
hyunuktak [Thu, 30 Jun 2016 08:31:39 +0000 (17:31 +0900)]
Removed cap for mac override and change the label for connman dir
Change-Id: I5e140d9ec4d3de94a429e97206045407461b59ae
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
hyunuktak [Tue, 28 Jun 2016 07:55:17 +0000 (16:55 +0900)]
Modify to get rsn mode using pairwise
Change-Id: Icb3942835130528c4d61d427ee1891d88cc1ac3b
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
hyunuktak [Wed, 22 Jun 2016 10:38:56 +0000 (19:38 +0900)]
Remove some features and modify service file
Change-Id: Id3697d995e4db5d6f03cdf182825d5f61136e235
Signed-off-by: hyunuktak <hyunuk.tak@samsung.com>
chleun.moon [Wed, 22 Jun 2016 04:23:50 +0000 (13:23 +0900)]
Fix Svace issue 102125
Change-Id: If753aeecc7206c4421dcd01d3359b9ae587e0f92
Signed-off-by: cheoleun <chleun.moon@samsung.com>
Niraj Kumar Goit [Thu, 16 Jun 2016 14:26:45 +0000 (19:56 +0530)]
[SPIN] Apply system socket - onlycap support
Change-Id: Icc887f469e77eea24915c89efcf216aff466fa98
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 16:47:40 +0000 (22:17 +0530)]
[SPIN] Indicate auth-failed error.
desc: In case of wifi connection if Association fail,
indicate "auth-failed" error.
Change-Id: Ie08088f3e5b5ff940d0e4290814c266d28e59b15
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 15:43:53 +0000 (21:13 +0530)]
[SPIN] Fix wireless issues in connman.
desc: Set connection error when AP is removed.
Change ASSOC_RETRY_COUNT(3 -> 4).
send the scan request after connecting - check the ap availability
fix the too much scan in associating
Change-Id: Ia1d0367a2f792f6c2f92a6ef498b37511840135d
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 14:56:19 +0000 (20:26 +0530)]
[SPIN] Check if network is already removed in connect callback.
Change-Id: I6b7916473347bba2b93d1565d59c95eaca0d2190
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 14:43:09 +0000 (20:13 +0530)]
[SPIN] Added the connman disconnect reason property.
Change-Id: I11fd7baa7d00fa3f3a12bdafda7ff7aa6943d020
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 12:33:55 +0000 (18:03 +0530)]
[SPIN] fix the invalid state from supplicant.
Change-Id: I68de9746804f5a9045dca026dc1230cd40cf1a37
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 11:48:52 +0000 (17:18 +0530)]
[SPIN] Update operating frequency properly.
Change-Id: If4ce1cbf1518e1fc93ced32affe98aa05209b307
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 11:04:28 +0000 (16:34 +0530)]
[SPIN] add keymgmt property for bss.
Change-Id: Id436db5828febaabd8273c2e0aab91f9ee9572ff
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 10:43:46 +0000 (16:13 +0530)]
[SPIN] request RemoveNetwork when disconnected to stop scanning in supplicant.
Change-Id: I4248b2de4d00d4218dcfac078bcda3e95db83896
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Wed, 15 Jun 2016 10:09:36 +0000 (15:39 +0530)]
[SPIN] Fix the connman bugs.
- Fixed NTP service's DNS resolving failure in Hive project.
- Do not turn "wlan0" interface down in cleanup_devices().
- Set resource limits "RLIMIT_NOFILE" for a process.
- After appending a file, fflush and fsync all modified in-core data of the file.
Change-Id: I2767b3302d6204d066fe2075027828ff209d0ee0
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 17:35:55 +0000 (23:05 +0530)]
[SPIN] change the ntp update logic
desc : add the resolved server list into time_server list. It is only
using the first item of timeserver. Not use gateway for ntp server
if enabled WLAN_ALWAYS_POWERED.
Change-Id: I2f55ade5b7208a7f893516b817d4ff6bffa62a04
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 17:25:50 +0000 (22:55 +0530)]
[SPIN] Add the dns address validation checking logic
desc : some of AP sends the DNS response even though AP is not connected
with internet service. In this case, DNS response address is not proper
- it is the private address. So, we check the address validation before
sending the internet url.
Change-Id: I5dae725e931e5d66072bb809c8cce489ffa79379
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 17:17:31 +0000 (22:47 +0530)]
[SPIN] implement to check blacklist for auto connection.
Change-Id: I174b228529374f80b1c4197a310124c028564bb8
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 17:07:28 +0000 (22:37 +0530)]
[SPIN] config: Ignore provision_service for open(none) security.
Change-Id: I9f787846f3b1f4b4f147f64821a8b5c25b0367d7
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 16:54:37 +0000 (22:24 +0530)]
[SPIN] gsupplicant: fix stucking in scanning state when scan failed.
- gsupplicant: fix stucking in scanning state when scan failed.
- Apply ASLR option.
- Add ""TIZEN_WEARABLE"" check in service file.
- change the dhcp client device name.
- default internet service: fix not cleared if pdp activation failed.
- Change Russia cert build feature.
- Update the Connman.service.in file.
- Remove connection retry when association fail.
Change-Id: I3ac8e49d0a3c229b298296f8e7cbf34845c2c90d
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 15:26:18 +0000 (20:56 +0530)]
[SPIN] support ft-psk and ft-eap security type.
Change-Id: Idc4ff4294ada3b234dd4af29558c0923b9aff017
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 14:30:05 +0000 (20:00 +0530)]
[SPIN] gdbus: revert pending DBus call.
Change-Id: Ic8781d015af6e83ca9e90183f9b256ec9f5a0812
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 14:08:01 +0000 (19:38 +0530)]
[SPIN] config: reset phase2(eap-method) parameter.
Change-Id: I7a48419ddcf18c735a609324c0c98510193c63ed
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 13:11:01 +0000 (18:41 +0530)]
[SPIN] set priority for connected service.
Change-Id: If32af57fef608cb7fb8a69d2c8ceacc88a86ce98
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>
Niraj Kumar Goit [Tue, 14 Jun 2016 12:42:33 +0000 (18:12 +0530)]
[SPIN] network: enable DHCP failure.
When DHCP is failed, most of normal users cannot understand
auto-generated IP (IPV4 link local). So set error CONNMAN_NETWORK_ERROR_DHCP_FAIL.
Change-Id: Ic80eb0436e41cff3a4bfb11dfef722b3029b0399
Signed-off-by: Niraj Kumar Goit <niraj.g@samsung.com>