RISCV: config: Enable img gpu config

Enable Imagination PoerVR GPU driver defconfig.

Change-Id: If8e8b51fe59a367a0981f65b5cc7b3f44f9a8782
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

gpu: drm: img: Fix to use iterator instead of list

Change the dma fence management method from list to iterator method.
Also the fences have to added individually on each other driver. So
dma_resv_add_fence does not add a fence, but dma_resv_reserve_fences
is used to add it.

Change-Id: I4c87608b9878e218fe0ae5cc5acb564c1f9d5db9
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

gpu: drm: img: Fix to use jh71xx_pmu header

Fix to use jh71xx_pmu header and sifive_flush64_range.

Change-Id: I9ad7d5f3de347be0f26ceb4633b0125d2a6480ef
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

soc: starfive: Add feature for hw event masks

Add hw event masks off feature for use with other drives.

Change-Id: I5b8862cd50b35f0b8ceed770d95a5c17bde8b12c
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Walker Chen <walker.chen@linux.starfivetech.com>

gpu: drm: img: Fix PVRSRV device initialization time

If the initialization time is a probe, the problem of not loading the
firmware occurs. Fix the initialization time to open time.

Change-Id: I1372230fdbe754845146eacd7bbb7b4e248c2c4f
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/GPU: Add support Imagination PowerVR GPU driver v1.17

Add support Imagination PowerVR GPU driver with starfive JH7110. This
driver is from [1], and the imported patch list[2]. We modified
driver compatible and clock in the device-tree to fix kernel v6.1.

[1] https://github.com/starfive-tech/linux

[2] patch list from v5.15.y
  b9049f928d30 gpu: drm: img: disable PDUMP
  092482e4811e driver:GPU: adjust interface sequence 1. add axi disable interface 2. adjust the interface order between clk and
  b320e5501342 gpu:driver: fix up hibernation resume problem
  0dea95655224 driver:gpu: add gpu runtime pm
  0381e221bc0d driver:gpu: gpu driver change to release
  6ccc2d8209d9 driver:GPU:set the gpu frequency to 594Mhz
  d81e5fcbcccc driver:gpu: gpu driver upgrade to 1.17
  18a68c90c061 Add Wayland with GPU support.
  e4d3672cccbe driver:GPU: use pm runtime interface
  4c34123a3d81 driver:GPU: Using the GPU driver release version
  1ed4d6d30d92 driver:GPU: Disable apm to resolve pvrdebug -dd suspension  error
  13e336d5b5ae driver:GPU: adjust ClockSpeed to 409.6MHz
  c2a828350549 driver:GPU: fix compile warnings
  2ba6ee6d00df driver:GPU: add gpu driver

Signed-off-by: shanlong.li <shanlong.li@starfivetech.com>
Change-Id: I8ac4ba0038e8ba48c48d615f8700c49c7ff706b9
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: configs: Enable/Disable some configurations

Enable/Disble some configurations to decrease a module size.

Change-Id: Ie86fb46b9ff2c6550b9c9053ce942ec7e4f3c81f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

RISCV: dts: starfive: Change wr/rd_osr_lmt value from 4 to 0xf

Change wr/rd_osr_lmt value from 4 to 0xf.
When value is using to 4, ethernet Rx Performance is decreasing.

Vendor kernel(v5.15) is using its value as 0xf.

The below is iperf result.
- Using to 4   - Rx is 45MBits/sec, Tx is 980MBits/sec
- Using to 0xf - Rx is 750MBits/sec, Tx is 930Mbits/sec

Change-Id: Ie6763a00ec2795e43bdbae2f224638732c789490
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

RISCV: dts: starfive: Add driver-strength relevant to motorcomm

Add driver-strength relevant to motrcomm phy driver.

This patch is based on the below commit.
https://github.com/SaminGuo/linux/commit/ebd75b0007b235a4a9dc9163d08820b4b9fdfc9f

Change-Id: I0bcbea398019671ef550c053171826bb4978849d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

net: phy: motorcomm: Add pad drive strength cfg support

The motorcomm phy (YT8531) supports the ability to adjust the drive
strength of the rx_clk/rx_data, and the default strength may not be
suitable for all boards. So add configurable options to better match
the boards.(e.g. StarFive VisionFive 2)

Original commit: https://github.com/SaminGuo/linux/commit/3732faf2239b77478022246b9ac62902ec30c2c6

Change-Id: Ic805273b769f3ee47eab4aec1c16c6633d466ac8
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

soc: sifive: ccache: Fix to use soc starfive jh7110 addr

Fix to use jh7110 address when using jh110 soc.

Change-Id: Id282ec6f67b73336f89118f4e3446e953a27f270
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

sound: soc: ac108: Remove unused function and fix fallthrough warning

Fix the unused-function and implicit-fallthrough warning.

Change-Id: I84b7203c3ca864ecb89c562058037dd0630e5c25
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

Bluetooth: Fix build warning

Occur build warning for unused variable, Fix warning

  net/bluetooth/hci_event.c: In function ‘process_adv_report’:
  net/bluetooth/hci_event.c:6470:7: warning: unused variable ‘match’ [-Wunused-variable]
    bool match;
         ^~~~~
  net/bluetooth/hci_event.c:6469:26: warning: unused variable ‘d’ [-Wunused-variable]
    struct discovery_state *d = &hdev->discovery;

Change-Id: I5c6778aea827e6d138009541991409834ea9cc07
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

packaging: Update build required openssl version from 1.1 to 3

Openssl 1.1.1 is supported until September 2023, so Tizen 8.0 upgrades
Openssl 3.0.x. To meet this, change build required openssl version. Also
required with pkgconfig.

Change-Id: Ia66aa62a7ddb6517b83d89d4b87fe6cebb452e46
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

perf cpumap: Make counter as unsigned ints

These are loop counters which is inherently unsigned. Therefore make
them unsigned. Moreover it also fixes alloc-size-larger-than
error with gcc-13, where malloc can be called with (-1) due to tmp_len
being an int type.

Fixes
| cpumap.c:366:20: error: argument 1 range [18446744065119617024, 18446744073709551612] exceeds maximum object size 9223372036854775807 [-Werror=alloc-size-larger-than=]
|   366 |         tmp_cpus = malloc(tmp_len * sizeof(struct perf_cpu));
|       |                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Upstream-Status: Submitted [https://lore.kernel.org/linux-perf-users/20230123211310.127532-1-raj.khem@gmail.com/T/#u]

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Change-Id: I7ecc661339efd49179dd4c1823f4969cee0b0515
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

drm/verisilicon: Add Innosilicon HDMI driver

Add support Innosilicon HDMI driver of starfive JH7110. This driver is
from [1]. We modified to select and use stable inno_hdmi driver or
mainline posted hdmi driver.

[1] https://github.com/starfive-tech/linux

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
Change-Id: I5c72e2d9fe7cc9f231926f624f459547d73e0f1e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: hdmi: Add feature to check cea mode

There is a problem with output for modes that are not supported, and
due to this, the hdmi sound is not played. Add feature to check cea
mode.

Change-Id: I55e3daa4e6e98f6df26bf91de84c099077e7f339
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ASoC: SOC: Fix fmt with dai naming

Kernel v6.y does not support the legacy_dai_naming format, so there is
a problem that i2s does not work due to dai_name. Fix that issue.

Change-Id: I9aae5c683b4b5d803c12959ca2994e8cc3e6c577
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: dts: starfive: Add hdmi audio snd card

Add HDMI audio snd-card, The snd-card1 is use i2s and hdmi.

Change-Id: I64102445ffad0a072d5d8f62a886bbc9945fd1f1
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: hdmi: Add audio_init feature

Add hdmi_audio_init to use audio in hdmi driver.

Change-Id: If878ee4ee4a1665d91a34ef4f5c5f6d2ab60840e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: hdmi: Add support audio hdmi driver

Add support hdmi audio driver of starfive JH7110. This driver is from
[1], and the imported patch list[2]. We modified to use struct
starfive_hmdi instead of struct inno_hdmi also added to use
legacy_dai_naming.

[1] https://github.com/starfive-tech/linux

[2] patch list from v5.15.y
  5bec3220a8be drm:verisilicon:hdmi-audio:Adjust when to configure registers
  5a302a7a25fe gpu:drm:Add audio function in inno hdmi

Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Change-Id: Iae0ec57f2cf588c7ca177f7e284968ca9e68c674
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: hdmi: Fix to timming for hdmi_setup

When changing the mode, a problem occurs because we try to write a
value to reg in a state that is not resumed after suspend. Move the
timing of writing values to reg to enable.

Change-Id: I49db485e947c164129b1412cdff2a16d6306895e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: config: Enable sifive flush config

Enable SIFIVE_CCACHE and SIFIVE_FLUSH configuration.

Change-Id: I008c302e89896a0ea14f065365526e4b490b5af2
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: Add starfive_flush_dcache

There is a problem that the garbage cache value comes out when the
screen is displayed. Flush the cache by adding the flush feature.
The feature referred to v5.15 kernel.

Change-Id: I183eb0c1640c17b5ac27dcb1ce82555a5c651571
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

soc: sifive: ccache: Add flush feature

Add the ccache flush feature applied to kernel v5.15.
This feature flushes the garbage cache when output the screen.

Change-Id: I855fd37416f028f6d7c9b9e1459462e4da7e1740
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: config: Enable starfive drm and hdmi config

Enable DRM_VERISILICON and STARFIVE_HDMI configuration.

Change-Id: If26c6c98b84d3e9cddbc6b696e8332882b9f3b31
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: Fix to build error for drm hdmi

Modify for the 6.1 kernel interface.

Change-Id: I24b652c2c1ab102649586c3cdb6eca63256dc3ce
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

drm/verisilicon: Add starfive hdmi driver

Add HDMI dirver for StarFive SoC JH7110.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I328dcf0c0adf7bc2817675278034d6a2520a536b

drm/verisilicon: Add verisilicon dc controller driver

Add DC8200 display controller driver for StarFive JH7110 SoC.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I6efc987c092249e1eff2cd5a12cd32c4ed83056c

drm/verisilicon: Add drm plane funcs

Implement plane functions for the DRM driver.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I0b0680590b3f301afc316565c7321015d2177745

idrm/verisilicon: Add drm crtc funcs

Add crtc driver which implements crtc related operation functions.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I63d0234a3ac985f7f7c74c0dc3b679add2c12759

drm/verisilicon: Add mode config funcs

Add mode setting functions for JH7110 SoC.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I42ab5eaf511a339a9e13e47e395ea47eb1f3c0fd

drm/verisilicon: Add gem driver for JH7110 SoC

This patch implements gem related APIs for JH7100 SoC.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: Ic2a60aacc4fc1d7aa83cb663fe689053e5dd0040

drm/verisilicon: Add basic drm driver

Add a basic platform driver of the DRM driver for JH7110 SoC.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I58d5b12467e87355175f24ed02ff5c675df7e7d8

riscv: dts: starfive: jh7110: add dc&hdmi controller node

Add the dc controller and hdmi node for the Starfive JH7110 SoC.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I66e234aaa823baee37f211b36b661716ff8af483

dt-bindings: display: Add yamls for JH7110 display subsystem

Add bindings for JH7110 display subsystem which
has a display controller verisilicon dc8200
and an HDMI interface.

Signed-off-by: Keith Zhao <keith.zhao@starfivetech.com>
[cherry-pick : https://patchwork.kernel.org/project/linux-riscv/cover/20230602074043.33872-1-keith.zhao@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: Icb7b9d267d6e8545556acf92a1adf84d3ad2e248

packaging: Setup with source0 name

In packaging spec, source0 name is different from package name,
so setup also needs to be with source0 name explictly. Do setup
with source0 name.

Change-Id: I3400c7aa131ec2561745386f903de2e47fd9aab7
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

Bluetooth: Add LE connection parameter update

Add support for BT_LE_CONN_PARAM in l2cap socket.

Change-Id: I2ed693da26ba2d3464b9997bf1880c6c136055cd
Signed-off-by: Anuj Jain <anuj01.jain@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth : fix build error

Update device name on remote_name_event, Fix interface define for
build error.

Change-Id: I59df4a7e30f9a83a0efdce516b2a325cb3b0983b
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Fix the potential crash issue

There is a logic error in the event function. We should
check the callback function's parameter before calling.

Change-Id: I06a4a8c50317e5ec4ae8fe35e4b788105e090196
Fixes: bde01c80dd51 ("Bluetooth: Set le data length command and event")
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Set le data length command and event

Sets the data length for the le data packet with in the
advised limits. MGMT command and event are added to handle
the setting of data length.

Change-Id: Ia5c2167743cc9a29190e5631973e9d52d41caa1d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Read host suggested default le data length

This patch adds MGMT command and code for supporting reading
default le data length value set at the controller.

Change-Id: I2b81982dc26ed5af4a8f8a3d3913db5d64625260
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Write host suggested default le data length

This patch adds MGMT command and code for supporting write
default le data length command to the controller.

Change-Id: I3d2c8b622b7913a3ed542342e3ba8076c30dc279
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Read LE Max data length command

This patch adds the MGMT command and code to support reading
the maximum data length supported command for LE.

Change-Id: I4dc0041f2070de2ccb6a4164c8823612863c941e
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Fix IPSP connection callback event issue.

This patch fixes the IPSP connection callback event issue
between kernel and bluez layer.

Change-Id: Ia4d625aa8a6dbc9da89a7d9f12308af9c90d0594
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: IPSP Connect/Disconnect apis

This patch adds MGMT code to support IPSP connect and
disconnect apis and handle connection state changed event.

Change-Id: I1c41ec4f38cf9a108e443def3bc23c1b964e2985
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add support to enable/disable IPSP

This patch supports MGMT commands and code to enable or disable
IPSP 6LowPan features.

Change-Id: Ia866ecfa517c7d7e4320f17d94d80dfeb9261e59
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Fix issue in the Set LE privacy function.

This patch fixes not to check the hdev power before setting
LE Privacy.

Change-Id: I344ea13b1d90527e3e7554ec616cdc640b85159c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Store the key if auth type is P192

This patch allows to store the key after authentication
if auth type is "HCI_LK_AUTH_COMBINATION_P192"

Change-Id: Ie44dbe7dfec361edab61aceaf9b2ca4057b88fa5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Cancel the Sniff timer

This patch adds code to cancel the sniff timer.

Change-Id: I756d3b08acf6462044d1fb204064fe12ce1238c1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Enable sniff mode for incoming connection

Add provision to set the link poilicy to enable sniff mode
for incoming connection.

Change-Id: Ifff9e9f0838f26a6c96d81f4cbaae43429aa231f
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Modify fast connectable type.

This patch modifies the fast connectable function
to just set the type.

Change-Id: I0cce96f85d823f9798ae7f147c4e33ce7b18e0e3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Send Authentication Request command on pairing failure

This patch allows to send HCI_OP_AUTH_REQUESTED command
to the remote device if pairing failure happens because
of pin or key missing error.

Change-Id: I9c28394dc06b22fd5fe9e58ac0b7d728c086bde4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Enable inquiry and page scan

This patch enables the inquiry and page scan after ACL
disconnection with one device and if there are no other
devices connected.

Change-Id: Ifb28be7d23f237d35112b2e0739ed55169baacf7
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Change authentication requirement.

This patch updates the authentication requirement to general
MITM if local and remote device IO capabilities are not
NO_INPUT_NO_OUTPUT.

Change-Id: Ie3955c3f8287418e74af20d40bdf30d0f1963e31
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Set link Supervision timeout for a connection

This patch allows to set the supervision timeout for a connection
if the device role is master.

Change-Id: I7897167ec07803f3059f2ab4d3314b0b7a951533
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Set filter policy for LE connection

This patch sets the filter policy to a default value 0x01 during
LE auto connection if the destination address is not set. And it
updates the destination address once the LE connection complete
event is recieved during LE auto connection. And for it checks
valid destination address before cancelling LE connection when
connection timeout occurs.

Change-Id: I9877556c0b0ab4826f5f4934ead4d85b7837036d
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[squash patches, LE connection policy, set dest address and check dest address before cancelling connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Get Advertising TX power

This patch adds MGMT command to read the advertising TX power.

Change-Id: Ide9e5d332f034928d2eae2cbd68a025a0d42be1b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Set the link for SCO connection

This patch sets the link policy for SCO/eSCO connection.

Change-Id: I71caef5a3887f73a10329b6886c8cf52b80e8d37
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[add link policy setting in sco connection]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add MGMT command to set SCO settings

Added code to set sco settings.

Change-Id: I37aa572436241b06e00d1e9e75964aac747eeba5
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[remove sco link policy part]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add multiple LE advertise state change event

This patch adds code for providing multiple LE advertisement state
changed event to upper layer.

Change-Id: I58fb8044e74402376ec30b121081edce7c8709d1
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci_vendor_mutli_adv_state_change_evt and remove hci event structure from mgmt]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add LE device found MGMT event

This patch adds new MGMT event for LE device discovery and allows
the handling of all advertisement packets in platform.

Change-Id: I1927acb75eff0b60a5899898c6d7a000e1a108ef
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: fix vendor ext rssi link alert event

This patch fixes style for rssi link alert event from vendor
specific group ext.

Change-Id: I0e7003e417c5f5a590cce8264caccad515dd3c10
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add H/W TX timeout error MGMT event

This patch sends the H/W TX timeout error MGMT event if HCI command
timeout occurs after sending HCI commands.

Change-Id: I5eb593f2fe4d31c404dd94ef582790e47d03b10a
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add hardware error MGMT event

Add code to handle hardware error MGMT event.

Change-Id: I5875ea2aeae7aba95c1f8e15b456704dc6bcdee4
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add LE vendor specific event handler

This patch adds the vendor specific LE meta event handler.
It handles the vendor specific handles like,
LE_MULTI_ADV_STATE_CHANGE_SUB_EVENT, LE_RSSI_LINK_ALERT.

Change-Id: I1f344a31e36f9c7442fe0bd8b598e67d9f5fb9bf
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
[divide hci vendor speicif group event function]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add set LE scan parameter feature

Added new MGMT command to set LE scan parameters

Change-Id: I5ea660f97e93dfcc72273971ad0250e7f582f718
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Set Manufacturer data feature

Added new MGMT command to set the manufacturer data
in the BR/EDR packet.

Change-Id: Ie08062f4cad0c676deab94fd95fdc1a8c5602135
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add LE connection parameter update procedure

Added new MGMT command to update LE connection parameters

Change-Id: I6ae16513437cd42d40e75958aa8415baa1cbedbb
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add stop LE auto connection feature

Added new MGMT command to disable LE auto connection.

Change-Id: I1f5f61b83227501ad54019008b405fd47fd722a3
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add BT LE discovery feature

This patch adds new MGMT commands to start LE discovery separately
and handles LE discovery state.

Change-Id: I85958b8c2b5c7e28f57c69e86037ab1e61a75db0
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Update device name on remote_name_event

This patch updates the device name on receiving the HCI event
remote_name_event during connection establishment.

Change-Id: I9a217e6760b1803a70af201a3f6903e722079749
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add RSSI Monitor feature

Added feature support for monitoring the RSSI value.
Commands and events for enabling, disabling and setting
rssi threshold values are added.

Change-Id: I850643a9228afc017e54217a11826b9c6a68a96b
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Functions to modify WhiteList

This patch provides MGMT commands to manage the white
list which includes, adding, removing and clearing the
devices from white list.

Change-Id: If71107129d3a090ae81448a8122b76accd4f5522
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add Advertising Packet Configuration

This patch provides new MGMT commands to configure
the advertising data and scan response data packets for
LE peripheral devices.

Change-Id: I914d13795f4fb58e5f2e1cadb55086f4bcbc82df
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
[jhoon20.kim: adjust some codes to apply it in 5.4 kernel]
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add MGMT tizen_handlers and TIZEN_OP_BASE_CODE.

Added the basic skeleton code for tizen_mgmt_handlers and
mgmt_tizen.h header file.

Change-Id: I8f3100aa79e6673840ba561f0a9c50238ca0880b
Signed-off-by: h.sandeep <h.sandeep@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

Bluetooth: Add "TIZEN_BT" flag

Added the tizen specific flag for use in adding tizen patches.

Change-Id: Ia391644fddbe600c8d845e0bf0808f587aa73e0c
Signed-off-by: Sudha Bheemanna <b.sudha@samsung.com>
Signed-off-by: DoHyun Pyun <dh79.pyun@samsung.com>
Signed-off-by: Amit Purwar <amit.purwar@samsung.com>
Signed-off-by: Wootak Jung <wootak.jung@samsung.com>

RISCV: configs: Enable configurations relevant to network

Enable configurations relevant to network stack.
It's referred to tizen-kernel-config.

Change-Id: Ice536221113ab67c45cb01be14dc38f0e76345c4
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

RISCV: config: Enable INPUT_EDEV config

Enable INPUT_EDEV configuration.

Change-Id: I4dee6d72f2fac9aa3c4fc229df9a207e24a9fff4
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: config: Disable APPARMOR and SELINUX for security

Disable SECURITY_SELINUX SECURITY_APPARMOR configuration. and chhange
LSM order.

Change-Id: I19dfa9811c4427bef6ee4336c0a8fd956c817b4e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: configs: tien_visionfive2: Enable RTL8XXXU config as module

Enable RTL8XXXU configuration as module.
And Other realtek drivers is enabled to use if someone wants to use
them.

Change-Id: I9ff25360d2d17bc315db7e09f9958e170ab1691d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

packaging: Remove variant from Source file name

Remove varianet from Source  file name.
During build, it's faield with below log.
(It's same on build system.)

[    9s] error: File /home/abuild/rpmbuild/SOURCES/riscv-visionfive2-linux-kernel-6.1.21.tar.xz: No such file or directory

Change-Id: I635d0e34bb73e02c910cd99c1db1a4af8b893fbc
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

RISCV: config: Enable INPUT_UINPUT config

Enable INPUT_UINPUT configuration.

Change-Id: Ie72a5072abd1202f4fb0611a8ebbbe2eda847699
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

RISCV: dts: starfive: use the aliases about mmc

The index of mmc is assigned according to probing sequence.
It means that index can be changed every booting time.
To prevent the wrong index, use the aliases as fixed index.
- eMMC : mmc0
- SD   : mmc1

Change-Id: Ie0abe1b01be55decf8be7cb9ae553a421240e422
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

Build packages for different platforms

Build separate packages for QEMU and VisionFive2 platforms

Change-Id: I0a44f7065f284bc40cde907238a2591836534251
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

RISCV: config: Enable configurations relevant to F2FS

Enable configurations relevant to F2FS.
Tizen is using F2FS filesystem on Headed image.

Change-Id: I5dcc1976815740b8d5c93a5f2036a08258327b68
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

RISCV: configs: Enable rtc defconfig

Enable RTC defconfig for starfive.

Change-Id: I0dea1a230c1c147caaf26fe7215a951c5d0b7c53
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

rtc: starfive: Add support jh7100 rtc driver

Add support rtc driver and device tree of starfive JH7110. This
driver is from [1], and the imported patch list[2]. We modified
compatible and clock in the device-tree to fix kernel v6.1.

[1] https://github.com/starfive-tech/linux

[2] patch list from v5.15.y
  fc56ea25c7ca ziv.xu   rtc:starfive: add pm ops for rtc
  cc1a7edcd475 ziv.xu   rtc-starfive.c:add system pm for rtc
  d369d91bd926 Hal Feng rtc: starfive: Standardize property "compatible"
  3d1b30793d55 Hal Feng rtc: starfive: Fix time may be not updated when date updated
  d85e29ea7625 Hal Feng rtc: starfive: Fix command 'hwclock' can't work in rootfs
  f344adc8fb81 Hal Feng rtc: starfive: Change reset api
  8cf53d91eb5f Hal Feng rtc: starfive: Improve rtc driver
  66422888adb5 Hal Feng rtc: starfive: Improve coding style
  99ae7e93b897 Hal Feng rtc: starfive: Use stardand clock and reset apis for initialization
  8b570194e872 samin    rtc: starfive: Get the interrupt status using Completion.
  1fafc8d35f88 SaminGuo rtc: starfive-rtc: Add RTC support for StarFive JH7110.

Signed-off-by: SaminGuo <samin.guo@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Change-Id: I4475e4314237bb8be670aefa40039c166107cb15
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: configs: Enable snd audio defconfig

Enable SND audio defconfig for starfive.

Change-Id: Ia190e39c22a530ccc0adfbc4b40cade25e046319
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

ASoC: SOC: Add support jh7110 audio driver

Add support audio driver and device tree of starfive JH7110. This
driver is from [1], and the imported patch list[2]. We modified
compatible and clock in the device-tree to fix kernel v6.1. Also fix
the build error for incompatible pointer types and others. And add
set 'legacy_dai_naming' value into starfive_i2s driver, for set to use
legacy dai naming when looking up DAI.

[1] https://github.com/starfive-tech/linux

[2] patch list from v5.15.y
  258954bfe609 Xingyu Wu sound: starfive: I2S: Fixed error after hibernation when building module
  09407b6be383 Xingyu Wu sound: starfive: pwmdac: Support module building
  00a1eaebe170 Xingyu Wu sound: starfive: pwmdac: Fixed playback failed after hibernation
  1f6659ddf77c Xingyu Wu sound:starfive:Move playback and capture driver as slave to starfive I2S
  c1ec8ddaa121 Xingyu Wu sound:starfive:pwmdac:Add runtime pm operation
  78f5ba02befa Xingyu Wu sound:starfive:Add hibernation in I2S
  40cbb24940b3 Walker Chen CR_2307_PWMDAC_515: fix playback repeatly issue
  099a9cd86939 Xingyu Wu sound:starfive:Remove i2srx-master and merge into starfive_i2s
  c813586d1913 Xingyu Wu  sound:starfive:Add I2S driver
  abd5f99857c5 Walker Chen CR_2071_audio_compatible_standard_515
  14d6015d73ed Xingyu Wu sound:starfive:pwmdac:Modify compatible name
  8fba0f28d470 Walker Chen CR_1827_cannot_record_play_simultaneously
  ae6c3943ef0c minda.chen  pwmdac:sound: support 11025hz play mode.
  279155cf4805 curry.zhang [Audio: PWMDAC] enable pwmdac driver on 7110 evb board
  7868835794ac curry.zhang [Audio: PWMDAC] Adjust code style
  1e872b48a7a7 curry.zhang [Audio: PWMDAC] Add standard system clock tree api
  e0f5d0916020 “jenny.zhang” [alsa] Add jh7110 audio module driver code

Signed-off-by: jenny.zhang <jenny.zhang@starfivetech.com>
Signed-off-by: curry.zhang <curry.zhang@starfivetech.com>
Signed-off-by: minda.chen <minda.chen@starfivetech.com>
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: PeterYang <linsheng.yang@seeed.cc>
Signed-off-by: Baozhu Zuo <zuobaozhu@gmail.com>
Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com>
Signed-off-by: michael.yan <michael.yan@starfivetech.com>
Change-Id: If1b6c957bbe5ea9f3464e591138da4cf57c6fd84
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: configs: Enable spi defconfig

Enable SPI starfive driver.

Change-Id: I395a723ca0e5f35e8666f59c5ab9d5067e549c46
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

spi: Add support pl022 spi driver

Add support pl022 spi driver and device tree of starfive JH7110. This
driver is from [1], and the imported patch list[2]. We modified
compatible and clock in the device-tree to fix kernel v6.1.

[1] https://github.com/starfive-tech/linux

[2] patch list from v5.15.y
  d88bd4b6aa1d ziv.xu    spi-pl022-starfive:Enable spi to be compiled into modules
  871266269a62 ziv.xu    spi-pl022-starfive:fix the problem of spi overlay reload
  9e71e5c05fee ziv.xu    spi-pl022-starfive.c: prompt warning when frequency does not surpport
  a1c1236322ba ziv.xu    spi-pl022-starfive.c: make spi work without dma
  9962a36e5788 Ziv.Xu    add device pm for spi
  9bd42158c0bd Xingyu Wu spi:starfive:Modify compatible name
  c9c015abab34 xingyu.wu spi:pl022-starfive:Turn off dma channel search under overlay
  c4eef3b4b80e xingyu.wu spi:pl022-starfive:Avoid power device error when CONFIG_PM enable
  e10123abbc5d xingyu.wu spi:Modify pl022 driver format
  a86c836215ce xingyu.wu spi-pl022:starfive:Add platform bus register to adapt overlay
  17c6be971d69 xingyu.wu spi-pl022:starfive:Add spi driver for StarFive SoC platform

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: ziv.xu <ziv.xu@starfive.com>
Change-Id: I631a219d56ea26e6609e33daa6c470b512da2698
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

RISCV: configs: Enable regulator AXP20X

Enable AXP20X regulator used by cpufreq.

Change-Id: I79160b30440732277bd25844ace40e4a8d54e734
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

regulator: axp20x: Add AXP15060 support

The AXP15060 is a typical I2C-controlled PMIC, seen on multiple boards
with different default register value. Current driver is tested on
Starfive Visionfive 2.

The RTCLDO is fixed, and cannot even be turned on or off. On top of
that, its voltage is customisable (either 1.8V or 3.3V). We pretend it's
a fixed 1.8V regulator since other AXP driver also do like this. Also,
BSP code ignores this regulator and it's not used according to VF2
schematic.

Describe the AXP15060's voltage settings and switch registers, how the
voltages are encoded, and connect this to the MFD device via its
regulator ID.

[1] https://lore.kernel.org/linux-sunxi/20230401001850.4988-1-andre.przywara@arm.com/

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
[Backported patch : https://lore.kernel.org/lkml/TY3P286MB2611DA5F918F90491A3AA02298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM/#Z31drivers:regulator:axp20x-regulator.c]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I24a8cc725d57bb07273df316e14d2eb05943d162

mfd: axp20x: Add support for AXP15060 PMIC

The AXP15060 is a PMIC chip produced by X-Powers, and could be connected
via an I2C bus.

Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Eventually advertise the device using a new compatible string
and add support for power off the system.

The driver would disable PEK function if IRQ is not configured in device
tree, since some boards (For example, Starfive Visionfive 2) didn't
connect IRQ line of PMIC to SOC.

GPIO function isn't enabled in this commit, since its configuration
operation is different from any existing AXP PMICs and needs
logic modification on existing driver. GPIO support might come in later
patches.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/TY3P286MB261162D57695AC8164ED50E298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
[Backported patch : https://lore.kernel.org/lkml/TY3P286MB261162D57695AC8164ED50E298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I53ddfe6ea5df415f84f401c64fb29d1378ba1569

dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant

The X-Powers AXP15060 is a PMIC seen on Starfive Visionfive 2 board. Add
relative compatible item and CPUSLDO support and disables DC-DC
frequency setting for it.

Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[Backported patch : https://lore.kernel.org/lkml/TY3P286MB261177CF7AA2959BD9517DA998609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: Ia8ada01c0f0e56642a14401d34a1b2a47ddf6851

RISCV: configs: Enable cpufreq defconfig

Enable cpufreq defconfig. Set default gov is ondemand.

Change-Id: I0c6ec29322e1e846d81e686528ac4c825b81287e
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

riscv: Kconfig: Enable cpufreq kconfig menu

Enable cpufreq kconfig menu for RISC-V.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221115105135.1180490-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
[Backported from https://github.com/starfive-tech/linux/tree/JH7110_VisionFive2_upstream]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: Ibc4020587fecdfcdbbde43732b4673c423c53e25

riscv: dts: starfive: Add cpu scaling for JH7110 SoC

Add the operating-points-v2 to support cpu scaling on StarFive JH7110 SoC.
It supports up to 4 cpu frequency loads.

Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
[Backported patch : https://lore.kernel.org/all/20230421031431.23010-4-mason.huo@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I0aeac76676938da45165a460a1d042fc36d2c8e4

cpufreq: dt-platdev: Add JH7110 SOC to the allowlist

Add the compatible strings for supporting the generic
cpufreq driver on the StarFive JH7110 SoC.

Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
[Backported patch :https://lore.kernel.org/all/20230421031431.23010-3-mason.huo@starfivetech.com/]
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Change-Id: I40c1539d935367f3da4b74f01aabde8428dc49d9