Youngjae Cho [Thu, 7 Jul 2022 09:18:59 +0000 (18:18 +0900)]
init: define state transition for bootreason=reboot
Change-Id: I5cf8b2a27688a3fd0c0c550555673e99abcd4495
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 30 Jun 2022 01:46:34 +0000 (10:46 +0900)]
Remove installation of not existing file
The iot-headless-power.so had been removed.
Change-Id: I4d45191e70e354934b5991a7f601afdd79e5ae17
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 30 Jun 2022 01:29:45 +0000 (10:29 +0900)]
battery: broadcast signal on charger connected/disconnected
Change-Id: Iaef820f91138eddead997f1a3c250d745d8ceb28
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Jun 2022 07:54:05 +0000 (16:54 +0900)]
battery: remove unnecessary probe for power-supply
It is naturally done by the power-supply module itself. Therefore it
is unnecessary for lowbat module to probe power-supply.
Change-Id: Id18bcea6a1bd9a0aae87c5f6a54815dc74b814b6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Jun 2022 01:05:40 +0000 (10:05 +0900)]
extcon: remove unused extcon count
Change-Id: I8d666e031338dd05db478b033ecf757a23971785
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 20 Jun 2022 07:57:46 +0000 (16:57 +0900)]
power: change state only when it is explicitly specified
It might not to change state if there is no defined ActionChangeState.
Change-Id: I16f6bd7992722787d2a95cc38c6764db81b67238
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 17 Jun 2022 05:26:50 +0000 (14:26 +0900)]
apps: move to shared library
Change-Id: I039bff30ad1b3745abd72ee4637caadd37487319
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jun 2022 08:24:17 +0000 (17:24 +0900)]
input: add WakeLockDurationSec to PWKEY_SHORT_EDGE
Change-Id: Ia9e6ab7cec68ef7fe5e3cbe8926f3838fd583da6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jun 2022 05:59:57 +0000 (14:59 +0900)]
input: add wakelock action for level event
Change-Id: Ie7fa5cb2d4c8101c9d56bc52130ed29caac2ccf4
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jun 2022 05:42:25 +0000 (14:42 +0900)]
input: rename Name= of EventAction
Change-Id: Iabdf19bd8c90937f0052e598b608f68efc0a6be7
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jun 2022 05:23:50 +0000 (14:23 +0900)]
input: rearrange EventAction in chronological order
Change-Id: Idd1363d61ca4c303936fcd027b812eb57c6efb5c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Jun 2022 05:22:07 +0000 (14:22 +0900)]
input: add broadcasting action for level event
Change-Id: I57090ba79f082d9c8c2a3c657e586ccc7f12a97f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 15 Jun 2022 05:28:17 +0000 (14:28 +0900)]
Reconfigure input for iot-headless
Change-Id: I035784568172ce7d8367f26361460d136b7d9c32
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 13 Jun 2022 06:09:12 +0000 (15:09 +0900)]
event: add event functions to shared library
It contains functions that handling wakelock of event, and broadcasting
signal about an event itself. The properties, WakeLockDurationSec= and
ActionBroadcast= of configuration file, utilize those functions.
Change-Id: I926f5e9cf19bfe09042797a200569c69e2b25a21
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 13 Jun 2022 05:09:27 +0000 (14:09 +0900)]
Change format of EventAction properties
There were two types of Action= property, one is broadcasting and the
other is changing state. Separate them to have different property name,
Broadcast= and ChangeState=.
- Action=broadcast -> ActionBroadcast=yes
- Action=curr,next -> ActionChangeState=curr,next
In addition to this, changed Duration= to clarify its meaning.
- Duration -> DetectionRangeMsec
This is intermediate patch. Therefore in this version, the property
'ActionBroadcast=yes' won't work properly.
Change-Id: I00440c9bc30557812618b95f1a25663e9466158a
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 14 Jun 2022 01:35:50 +0000 (10:35 +0900)]
power: reinforce log at PowerChangeState method
Change-Id: I53db2b4855fc8fafb5ab4436d3d95d37e04bbf77
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 16 May 2022 06:59:55 +0000 (15:59 +0900)]
battery: disable module if battery.present is 0
The actual behavior of no battery remains same as before. It is the
main purpose of this patch that cleaning up handlings and loggins.
Change-Id: Iaae8ac1ce6a438f0a2984d7ea6a3e6953ff8a51f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 7 Jun 2022 05:31:25 +0000 (14:31 +0900)]
battery: remove unused variable, charger_charging
Change-Id: Ic7ea822a41b9cc1a1561d6b1a2c40da648220a3d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 7 Jun 2022 04:41:27 +0000 (13:41 +0900)]
log: add critical-log type of error
Change-Id: I4e7abb62edafc719decd2d9f9e6841de46e0fbf7
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 7 Jun 2022 04:20:40 +0000 (13:20 +0900)]
battery: rename charging_level to capacity_level
Change-Id: If092c80ced70eb2ed64570383ffa1a99b1f442bf
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 3 May 2022 05:04:18 +0000 (14:04 +0900)]
battery: remove unused frequency strength
Change-Id: I8e0ecff76defec792b9d0f694996d49435343791
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 2 Jun 2022 06:30:19 +0000 (15:30 +0900)]
usb-gadget: make variable null after free
The SIGABRT(heap-use-after-free) was raised. It happened rarely when
the sdb is re-enabled after disabled due to unstable envrionment.
(But it is unclear what the unstable envrionment is.) To prevent this,
make a variable null after freeing it.
Change-Id: I2218004bf2069d6f8a6c835ba8883ece22f9c75b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 2 Jun 2022 05:05:27 +0000 (14:05 +0900)]
power: change PowerChangeState reason to 0
Change-Id: I597f90d4ecae63b7cf645431f2ef09bb86fa02c8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 31 May 2022 06:11:10 +0000 (15:11 +0900)]
power: add dbus method for controlling power state
Change-Id: I6973dd1fdad1e5c3c9aebbf23aa00be372cd3a1e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 17 May 2022 02:49:27 +0000 (11:49 +0900)]
power: unify power state transition routine
Previously, the iot-headless dedicated poweroff was working on top of
the core poweroff routine. Integrate them into the single poweroff
routine so that all type of poweroff is now take the same subroutine.
In addition to this, there two internal functions have been added for
deviced to trigger change power state by itself. All power state change
thorugh these functions take the same subroutine.
- power_request_change_state_strict()
- power_request_change_state()
Due to the above changes, the deviced is now able to broadcast all
types of power change state in the unified manner. Therefore, if
someone wants to know the power state change of deviced, just use
power API.
Change-Id: I6573872eb3aa7c50d2d6af575ccce4dc25cab3de
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 26 May 2022 05:07:46 +0000 (14:07 +0900)]
Fix dbus policy typo
Change-Id: I84382003be4a4631fdabdc728a739ab755c291c6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 13 May 2022 01:49:05 +0000 (10:49 +0900)]
power: refactor poweroff sequence
This is intermediate patch before applying power-state-wait mechanism
to power-off.
Change-Id: Ie5e302962ffd206b61a8b3f9857e83e22f83ed17
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 11 May 2022 08:52:25 +0000 (17:52 +0900)]
input: support bluetooth key input for iot-headless
Change-Id: I9a082c36bba8a737a3f2fe29d8d75dc444803400
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 13 May 2022 00:48:25 +0000 (09:48 +0900)]
device-notifier: prevent index out of bound
Change-Id: I5d0ab792bb605f259bc6c7f0a486ecb84d4e3930
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 12 May 2022 01:49:08 +0000 (10:49 +0900)]
power: elevate iot-headless power plugin to core
The power plugin, power-state-manager, has merged into core module
and now it administers the whole power module instead of existing
power-handler. The power-handler has renamed to power-off to match
up with its functionality.
Change-Id: I8c93162639d1793635e9b7620ecf4210c4dca23b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 1 Apr 2022 08:25:40 +0000 (17:25 +0900)]
power: refactor power operations
Fix wake lock/unlock operation to have prefix of "power". And it
replaces indirect invocation through device_notify(), which is often
in iot-headless.
Add functions for add/remove poweroff wait for internal usage. It
is similar to the existing add/remove dbus methods, but only differs
in that the function can be invoked by the deviced itself.
Change-Id: Ide3ceb5f894b376901637992d66401a110eafbf0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 9 May 2022 04:56:22 +0000 (13:56 +0900)]
usb-gadget: fix usb-gadget configuration parsing
The section [SystemdUnit] is now properly applied.
Change-Id: I204d2fb7bee19b0dfac1feebe0c2876051b0937c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
SangYoun Kwak [Tue, 3 May 2022 09:03:15 +0000 (18:03 +0900)]
Add new command to set/get partition status
Change-Id: Idbbed070614b0d4438ad71a34f50c406e86f9c16
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
SangYoun Kwak [Mon, 2 May 2022 05:37:12 +0000 (14:37 +0900)]
Add new command to get current partition and modify switch-partition command
Change-Id: I32bfe926c07ae82db5c977a889c7302e03a207a8
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
Youngjae Cho [Mon, 2 May 2022 08:06:31 +0000 (17:06 +0900)]
usb-gadget: add dummy operations for emulator
Change-Id: I6491d3b918073ab9990a8c6d065c64badcf40d73
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 14 Apr 2022 10:00:24 +0000 (19:00 +0900)]
usb-gadget: introduce configurable function set
Previously, only a few predefine set of usb-gadget function can be
utilized for setting usb-gadget, e.g., SET_USB_SDB_DIAG means it only
activates usb-gadget functions of sdb/diag, and you are not allowed
to activates any other usb-gadget combination than those predefined
set.
For a better intuitive useability, remove those predefined set. And
you are now allowed to combine any kind of usb-gadget functions you
want to use, making up a bitmap, which can be used for activating
all those usb-gadget functions through vconf(db/usb/sel_mode).
Usb-gadget functions are defined in capi-system-device.
- USB_GADGET_FUNC_NONE = 0x00
- USB_GADGET_FUNC_SDB = 0x01
- USB_GADGET_FUNC_MTP = 0x02
- USB_GADGET_FUNC_RNDIS = 0x04
- USB_GADGET_FUNC_ACM = 0x08
- USB_GADGET_FUNC_DIAG = 0x10
- USB_GADGET_FUNC_RMNET = 0x20
Change-Id: I44c2bb2c751129613a3470569edf8babbe710845
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 20 Apr 2022 01:18:53 +0000 (18:18 -0700)]
usb-gadget: reinforce error log in opening a gadget
Change-Id: I44aaa629e7592ccb9c982266b16f31b71d0210ec
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Tue, 19 Apr 2022 03:45:17 +0000 (12:45 +0900)]
Add missing dependency to security-config
-- RPM install (w/ security-config) ---
root:~> ls -alZ /usr/bin/device_board_*
-r-sr-xr-- 1 system_fw system_fw _ 6912 Apr 19 2022 /usr/bin/device_board_clear_boot_mode
-r-sr-xr-- 1 system_fw system_fw _ 6920 Apr 19 2022 /usr/bin/device_board_clear_partition_ab_cloned
-r-sr-xr-x 1 system_fw system_fw _ 6920 Apr 19 2022 /usr/bin/device_board_get_boot_mode
-r-sr-xr-x 1 system_fw system_fw _ 6928 Apr 19 2022 /usr/bin/device_board_get_partition_ab_cloned
-r-sr-xr-x 1 system_fw system_fw _ 6920 Apr 19 2022 /usr/bin/device_board_get_upgrade_status
-r-sr-xr-- 1 system_fw system_fw _ 6912 Apr 19 2022 /usr/bin/device_board_set_boot_success
-r-sr-xr-- 1 system_fw system_fw _ 6920 Apr 19 2022 /usr/bin/device_board_set_partition_ab_cloned
-r-sr-xr-- 1 system_fw system_fw _ 6928 Apr 19 2022 /usr/bin/device_board_set_upgrade_status
-r-sr-xr-- 1 system_fw system_fw _ 6912 Apr 19 2022 /usr/bin/device_board_switch_partition
-- QuickBuild image (w/o security-config) ---
root:~> ls -alZ /usr/bin/device_board_*
-r-sr-xr-- 1 root root _ 6912 Apr 18 2022 /usr/bin/device_board_clear_boot_mode
-r-sr-xr-- 1 root root _ 6920 Apr 18 2022 /usr/bin/device_board_clear_partition_ab_cloned
-r-sr-xr-x 1 root root _ 6920 Apr 18 2022 /usr/bin/device_board_get_boot_mode
-r-sr-xr-x 1 root root _ 6928 Apr 18 2022 /usr/bin/device_board_get_partition_ab_cloned
-r-sr-xr-x 1 root root _ 6920 Apr 18 2022 /usr/bin/device_board_get_upgrade_status
-r-sr-xr-- 1 root root _ 6912 Apr 18 2022 /usr/bin/device_board_set_boot_success
-r-sr-xr-- 1 root root _ 6920 Apr 18 2022 /usr/bin/device_board_set_partition_ab_cloned
-r-sr-xr-- 1 root root _ 6928 Apr 18 2022 /usr/bin/device_board_set_upgrade_status
-r-sr-xr-- 1 root root _ 6912 Apr 18 2022 /usr/bin/device_board_switch_partition
Change-Id: Ie60cb0e6af7012f186555d3af4835e123052882c
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
(cherry picked from commit
f0a2614d54446bd47aebde72575ae1655fa29da0)
Hyotaek Shim [Tue, 19 Apr 2022 05:28:11 +0000 (14:28 +0900)]
Fix DAC permission for board commands not to use SETUID
Instead, board user modules including booting-done.service
will have privileged credentials.
Change-Id: I9d838bc266fbb40d67ad61083254a7a527ae9ea3
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Thu, 14 Apr 2022 00:33:24 +0000 (09:33 +0900)]
Rename usb modules
- usb -> usb-gadget
- usbhost -> usb-host
Change-Id: I2ccce17d76e71399798424654dca9844f9874625
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 14 Apr 2022 02:10:32 +0000 (11:10 +0900)]
usb-gadget: relocate declarations of enum
Move USB_FUNCTION_IDX_* from hal-api-device to deviced.
Move USB_FUNCTION_* from hal-api-device to capi-system-device.
Change-Id: I820fa7532c9376ccf41fdfe7684a39613e60e16b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Thu, 14 Apr 2022 00:40:25 +0000 (00:40 +0000)]
Revert "usb: move vconf enum to deviced"
This reverts commit
0c5bad3d29e5a02272fa5434da4cc99ac19bc7a5.
Change-Id: If26ac0bf037c16ee521c9517296441404e7be159
Hyotaek Shim [Wed, 13 Apr 2022 11:59:41 +0000 (20:59 +0900)]
Modify DAC permission (setuid) for board commands
Change-Id: I94cf96b0b6aa192b6f12ed1df3762a944e6f2e14
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Wed, 13 Apr 2022 08:13:34 +0000 (17:13 +0900)]
usb: move vconf enum to deviced
Change-Id: I98e52b0747e77cfc84a757a5a21fd6054b26baa9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Wed, 13 Apr 2022 08:22:27 +0000 (17:22 +0900)]
Change permission (system_fw:system_fw) for board command tools
Change-Id: I990e96517890d2508bb4fe3bd479aff7ed6d6489
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Wed, 6 Apr 2022 08:40:04 +0000 (01:40 -0700)]
usb: move usb-gadget from device-common to deviced
Change-Id: I3190fb3c7ff62aab41dc3f4959d26ce8647d03bc
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
SangYoun Kwak [Fri, 8 Apr 2022 08:29:15 +0000 (17:29 +0900)]
Fix implicit declaration warning
Change-Id: I9abfa31c34e01ed1796655cd86705430ab279d2f
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
SangYoun Kwak [Thu, 7 Apr 2022 07:32:35 +0000 (16:32 +0900)]
Modify the return value and the output of deviced-tools
Change-Id: Ic9070e2062f17b109a09791d38948e0aa7c20da9
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
Youngjae Cho [Wed, 6 Apr 2022 00:29:24 +0000 (17:29 -0700)]
usb: prevent not null-terminated string
Change-Id: I17b1d4c7753120dd09192523f75c8939ba96e184
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 1 Apr 2022 06:30:23 +0000 (15:30 +0900)]
power: separate power configuration for each profile
Change-Id: Id24e09c02a3e4e706cbe95eeee351eb23c250273
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
SangYoun Kwak [Fri, 1 Apr 2022 07:07:13 +0000 (16:07 +0900)]
Fix to initialize the char pointer to NULL
Change-Id: I7144bf7646e813a905c3eae7fd209d342cabb450
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
Youngjae Cho [Wed, 30 Mar 2022 01:28:05 +0000 (18:28 -0700)]
hdmi: remove display control
Controlling display from hdmi will be more discussed as multi-display
concept would be introduced. Therefore, remove old fashioned display
control policy.
Change-Id: Iecd28b73491d6fcb565183196d2c9291720db23a
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
SangYoun Kwak [Thu, 31 Mar 2022 05:05:03 +0000 (14:05 +0900)]
Fix include and parameter
Change-Id: I9ced21c55ce596087418a9f5f3867e42411e16c7
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
SangYoun Kwak [Wed, 30 Mar 2022 09:20:59 +0000 (18:20 +0900)]
Add new commands for upgrade status and change params in switch command
Change-Id: Ib9de10fd0609cfa1eaa631e01f2a5eff756ff933
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
Hyotaek Shim [Wed, 30 Mar 2022 05:33:26 +0000 (14:33 +0900)]
Fix DAC performance for device_board tools
Change-Id: I5c4cff6cef406aa4dcc798743bb8c3d3fd5a67f1
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Thu, 24 Mar 2022 04:56:26 +0000 (13:56 +0900)]
power: add configuration for poweroff delay time
Change-Id: I29fe716445cb197b66338d973c6acd1fc40890a8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 24 Mar 2022 06:45:47 +0000 (15:45 +0900)]
power: change configuration section of TimeoutSleepSupport
Change-Id: I9e534b858d7994182d994d9649d4f1e2375c32e9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
SangYoun Kwak [Tue, 15 Mar 2022 07:23:25 +0000 (16:23 +0900)]
Add new command to manipulate the "cloned" flag
Change-Id: I6dc81870f7769869f02b0dfaa6e2418179288ee2
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
Youngjae Cho [Wed, 16 Mar 2022 08:25:33 +0000 (17:25 +0900)]
usb-gadget: introduce configurable usb-gadget
Change-Id: Iaf2adf68666b1def8dcf6b04707d0f5a3f5fc3e0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 14 Mar 2022 05:32:36 +0000 (14:32 +0900)]
Support silent boot via cmdline bootmode
The /proc/cmdline has changed to have bootmode=silent parameter on
silent booting.
Change-Id: I15ebb44bdd86155fc1a65489e23ec527fd9cbf86
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 14 Mar 2022 02:01:37 +0000 (11:01 +0900)]
battery: fix name of battery charging state
Change-Id: Ide4c233bf2c69ffdec270622a5d23736cfb661e4
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 8 Mar 2022 02:44:56 +0000 (11:44 +0900)]
battery: suppress config parse error
Do not consider encounter of a section that we are not intersted in
as an error, because several new sections have been added recently.
Change-Id: I9d3f3d6a5dd6e14ca0478ed6f661e39a7519cd46
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 7 Mar 2022 06:53:56 +0000 (15:53 +0900)]
Fix section name to follow the coding ground rule
Change-Id: I0a6d6d499a0bfcfaa1b8bf0f275b6de3470e84f2
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 14 Feb 2022 04:02:59 +0000 (13:02 +0900)]
auto-test: add uevent control before/after the battery test
During battery test, uevent must be ignored as test-driver generates
pseudo-uevent and a real-uevent might corrupt it.
Change-Id: Idf44757c00e2f2fadda75d87cec3a2982ee0871e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 7 Feb 2022 05:19:44 +0000 (14:19 +0900)]
power: clarify meaning of power-state-wait log
Clarify it to imply the meaning of "how many" processes have requested
for state-wait.
Change-Id: I96dccbdcf60c84307d3d4e0dc39794421cda4549
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 3 Feb 2022 07:25:20 +0000 (16:25 +0900)]
auto-test: check feature using system-info library
Previously, the uniitest is conducted based on statically defined
configuration file, auto-test.conf. Replace it to system-info API,
which fetches feature on runtime. Therefore it is able to find feature
on various target without defining one by one in advance whether a test
can be deserved.
Change-Id: Iaf445edc4c566517c37106dd00c67c42cd7f813a
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 27 Jan 2022 01:46:10 +0000 (17:46 -0800)]
battery: rename battery.online as charger_connected
The charger_connected has changed to have only a value of 0 or 1,
which corresponds to charger disconnected/connected. At before, the
variable can have any integer other than 0 or 1, which implied which
type of charger had been connected. Instead of those integers, the
power_source_s or vconf can be utilized for charger type.
The vconf, VCONFKEY_SYSMAN_CHARGER_TYPE, which was exclusive for MCD
product profile, has changed to have a one of the value belows, and it
will be changed according to battery.power_source_s.
0 (none, charger disconnected or unknown type)
1 (ac)
2 (usb)
3 (wireless)
Change-Id: I8ff4751e521585f94cd421a0edeba04651094bce
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 18 Jan 2022 09:43:07 +0000 (18:43 +0900)]
power: defer state transition until booting done
If a transition event occured before booting_done(=delayed_init_done),
defer the transition until booting done.
Change-Id: Ib79974b34a8b55751d542c50f9354cdc95ae021b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 18 Jan 2022 09:15:06 +0000 (18:15 +0900)]
battery: fix condition of update_online()
Initialize online_status by -1 so that the update_online() shall process
properly even when the device has turned on with charger disconnected.
Change-Id: I25c51f0aa856c2b1190f148f650b674054f918f7
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 13 Jan 2022 01:37:52 +0000 (17:37 -0800)]
Fix conf filename format to {module}-profile-{profile}.conf
Change-Id: I5bd5e1e635b43fe3fa55f657ac6d162920f1d827
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
SangYoun Kwak [Mon, 17 Jan 2022 02:35:17 +0000 (11:35 +0900)]
Add license declaration in source files
Change-Id: Iad0053e73a19b1dbd71ed9b3f432bd8cafc9f13d
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>
Youngjae Cho [Wed, 12 Jan 2022 05:55:31 +0000 (21:55 -0800)]
input: add ConditionVconf property for conditional action
[EVENT_ACTION] of input.conf can now have property ConditionVconf
- ConditionVconf=key,type,value
which set the condition for an event, so that it will trigger action
only when the given vconf meet.
Change-Id: I3dbd4484718cc3ba3b9b241ec670b28963d45f3d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 12 Jan 2022 07:01:04 +0000 (23:01 -0800)]
power: make change state wait timeout configurable
Change-Id: I808f29e3518c643a295189accf919cd163f75e7e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 7 Jan 2022 07:47:51 +0000 (16:47 +0900)]
power: add initial power state transition on deviced startup
The first transition is specified in init.conf. The transition is
selected by /proc/cmdline bootreason=.
Change-Id: I7ce713fac9008c5cdcc3f9a76a089bb6ebd16db8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 3 Jan 2022 09:35:05 +0000 (18:35 +0900)]
battery: introduce battery-plugin for iot-headless
It handles battery event according to the iot-headless policy. Those
policies are specified in battery.conf. For now it only handles event
about charger connect/disconnect.
1. It triggers power state transition. Those transition actions are
specified in EVENT_ACTION section.
2. It might hold wakelock for charger connection. It is specified in
CHARGER_WAKELOCK section.
Change-Id: Iee6803604a25bacca5ce68953033b71560ed4ba8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 5 Jan 2022 07:44:15 +0000 (16:44 +0900)]
power: introduce eventlock for iot-headless
eventlock is another wakelock for guaranteeing subroutine of an event
not to go to sleep regardless of power state. Therefore, the eventlock
works independently of mainlock, which is affected by power state.
The previous templock, which was for key event, has changed to eventlock.
Change-Id: Ie6ac4cf2de6989845b2e64eefe06002147736da2
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 6 Jan 2022 05:19:41 +0000 (14:19 +0900)]
tests: add explicit typecast on expect_check()
This suppresses mismatch of check_expected() due to sign-extended
integer of cmocka framework on 32bit architecture.
Change-Id: Ief1b52513c4d78a6373aaba7a36c97ed687768d0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 5 Jan 2022 09:45:12 +0000 (18:45 +0900)]
device-notifier: add priority to device-notifier
The priority is sorted in descending order, therefore the higher
a priority is, the earlier it is invoked compared to the lower one.
Change-Id: I30c995cdb4d8b84faf1d4542b81e27052b94a9ab
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 4 Jan 2022 09:34:49 +0000 (18:34 +0900)]
device-notifier: add callback that can receive user_data
typedef int (*notify_cb_udata)(void *data, void *user_data)
>> The callback has an additional parameter, user_data, for receiving
user data.
typedef void (*destroy_cb_udata)(void *user_data)
>> The callback is invoked on removing notifier with parameter
user_data.
int __register_notifier_udata(enum device_notifier_type type,
notify_cb_udata func, void *user_data, destroy_cb_udata func_destroy,
const char *caller)
>> Returns negative errno on error occured. Otherwise positive integer
that denotes notifier id, which can be used for unregistering the
notifier.
>> There are two additional parameters compared to the original
register_notifier(). One is user_data, which is passed as the
second parameter to callback and the other is func_destroy, which
is invoked on removing notifier.
>> It is allowed to register multiple notifier with same callback on a
same type, because a user_data might differ even though they have
same callback on a same type.
int __unregister_notifier_udata(int id, const char *caller)
>> Receives notifier id and unregisters matching notifier.
Change-Id: I46d1fec98eae19dbd9aaed60dfd84f760d152b9e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Dec 2021 06:15:55 +0000 (15:15 +0900)]
input: change input.conf format and parser
Change-Id: Id6170a4f43ddef3b27f876f3e049dff100ad53a0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 20 Dec 2021 06:41:53 +0000 (15:41 +0900)]
tool: add board opeartions
Change-Id: I300c324d1175fe53b1b69520b4c9ba29219a91fc
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Dec 2021 07:43:20 +0000 (16:43 +0900)]
Fix format specifier of type uint64_t
Change-Id: Icaf193fbd700ece2d74482627cf9b3f54441f671
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 14 Dec 2021 09:20:25 +0000 (18:20 +0900)]
power: apply wait callback mechanism to all state transitions
Generalize sleep-wait mechanism. It now always waits on changing state
if some other processes has registered change-state-wait on the state.
On transition to a next state, remove all change-state-waits that
waiting for other than the next state. If a timeout expires or all
change-state-waits are confirmed, invoke wait-done callback.
Change-Id: I573ca68c3a6c210cad479e068ee088d6a31ba54f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 13 Dec 2021 01:37:07 +0000 (10:37 +0900)]
power: remove templock timeout
Hold templock on pressing a key unless it is released.
Change-Id: Ib7476b9aa8dc2c69b3b8d406464a56aa3a1b9aa9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 10 Dec 2021 01:06:53 +0000 (10:06 +0900)]
input: broadcast dbus signal on level triggered event
Change-Id: I7561ac2086665912e0d5b3c9eec88a7eca1efaa8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 9 Dec 2021 08:21:47 +0000 (17:21 +0900)]
power: fix dbus signal for changestate
The dbus siganl is broadcasted on changing state
path : /Org/Tizen/System/DeviceD/Power
iface: org.tizen.system.deviced.Power
name : ChangeState
param: "(iti)"
int32 : type (0: sleep, 1: wakeup)
uint64: state transition id
int32 : state transition reason
Change-Id: I04c01722fbdbf59fa2c9eae0c9b819e3aee77488
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 9 Dec 2021 04:21:05 +0000 (13:21 +0900)]
power: rework sleep-wait
The sleep-wait now works based on a single list. Whenever entering
to PSM_SLEEP, all sleep-waits, which had been registered by processes
through device API, will be added to the list waiting for confirmation.
Change-Id: Iebb1b177914847ee9c38ce8bf5fc01bb70d1f3c6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 8 Dec 2021 07:10:32 +0000 (16:10 +0900)]
power: introduce power-state-manager for iot-headless
Change-Id: I7b4d299d4f05585762b6c3f72d90e8e978eab2e0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
INSUN PYO [Thu, 2 Dec 2021 05:08:34 +0000 (14:08 +0900)]
usb: reimplementing sdb default enable mode and removeing engineer mode
By changeing vconf default key,
public tizen always operates in sdb enable mode.
Change-Id: I00b3c0707cda880a06225c359d6d551f80f4d089
Youngjae Cho [Thu, 2 Dec 2021 03:58:44 +0000 (12:58 +0900)]
input: fix bug
Change-Id: Ie3876548648558d5ac7642fc95d93d92587b566f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 30 Nov 2021 07:14:08 +0000 (16:14 +0900)]
input: make input configurable
Change-Id: I920de2208c1c01a59235933f408b227e71237828
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 29 Nov 2021 07:40:01 +0000 (16:40 +0900)]
input: change longpress interval to 7000ms
Change-Id: Id7677167e28e6fb48c45aa4470b037ae07f79da4
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Hyotaek Shim [Fri, 26 Nov 2021 05:20:13 +0000 (14:20 +0900)]
Fix SVACE issue
Change-Id: I2336155180610fbd0bfadb660e8509f845a2408d
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Youngjae Cho [Fri, 19 Nov 2021 08:46:56 +0000 (17:46 +0900)]
power: emit signal on wakeup
path : /Org/Tizen/System/DeviceD/Power
interface : org.tizen.system.deviced.Power
signame : wakeup
parameter : "(ii)"
uint64: current time in milisecond
uitn64: wakeup reason (refer device API)
Change-Id: I8078b056b8f22e86c545ceb291959fbe62bc6869
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 17 Nov 2021 07:44:55 +0000 (16:44 +0900)]
power: introduce sleep-wait for iot-headless
Sleep-wait defers wake unlock if somebody wants to defer sleep for a
short duration. For example, system might want to notify user that it
is going to sleep by alarming sound. To play sound, system must hold
running state for a moment.
One who wants to defer sleep must request sleep-wait. On receiving
signal that sleep is requested, it processes todo list before going to
sleep. And after finishing the job, it must confirm that it is OK to go
into sleep. For now, deviced waits maximum of 5 seconds, and after this
timeout, wake unlock even someone hasn't confirmed the sleep-wait.
Sleep-wait offers dbus methods.
1. Adding sleep-wait for deferring sleep
path : /Org/Tizen/System/DeviceD/Power
interface : org.tizen.system.deviced.Power
member : AddSleepWait
parameter : no parameter
return : "(i)", 0 on success, negative on error.
2. Removing sleep-wait
path : /Org/Tizen/System/DeviceD/Power
interface : org.tizen.system.deviced.Power
member : RemoveSleepWait
parameter : no parameter
return : no return
3. Confirming sleep-wait, which notifies deviced that it is OK
to go into sleep.
path : /Org/Tizen/System/DeviceD/Power
interface : org.tizen.system.deviced.Power
member : ConfirmSleepWait
parameter : "(i)", sleep id to confirm
return : "(i)", 0 on success, negative on error.
Change-Id: I58860ab7633c3863cc3ee06befc49b0e152934fe
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 19 Nov 2021 03:01:32 +0000 (12:01 +0900)]
input: change shortkey/longkey interval
Change-Id: I466c591b754c906fe9b77854e4fca43b4f78ac26
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 18 Nov 2021 09:07:03 +0000 (18:07 +0900)]
input: acquire temporal lock on pressing key
To process shortkey/longkey during autosleep is enabled, it must be
prevented to re-enter sleep right after the device is woken up by
key press. Therefore, hold wakelock temporarily during key pressed.
Change-Id: I9d4f282fcae0beeec9edb97e463f4b0eef2bfacb
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 17 Nov 2021 09:08:32 +0000 (18:08 +0900)]
power: emit signal before sleep on iot-headless
path : /Org/Tizen/System/DeviceD/Power
interface : org.tizen.system.deviced.Power
name : "sleep"
parameter : "(tt)"
uint64, current time in milisecond
uint64, sleep id
Change-Id: I1664898bf3f475125ad8bb3cafbd8a2c45948841
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 17 Nov 2021 01:17:14 +0000 (10:17 +0900)]
power: move sleep configuration to power
Change-Id: I5d6d7054149134bdea68f85802414e7783f8265d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 12 Nov 2021 05:53:00 +0000 (14:53 +0900)]
battery: invalidate battery vconf when battery disconnected
Change-Id: I4afad3783088c1cb1a7a8ef63b9535907b0a20ad
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>