TaeminYeom [Mon, 24 Apr 2023 07:09:49 +0000 (16:09 +0900)]
battery: Divide "update_ovp" plugin interface
When there is a battery over voltage protection change, update_ovp is called.
But the parts of update_ovp can be applied in common devices,
so move some of the codes to the function "check_abnormal_status" in core.
Also, there was little difference policy between wearable and mobile profile,
in checking previous notification status. Unify them to wearable's policy.
Change-Id: I210f0c094f4d0b8c356eb21d59da6e49d5de2d47
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
Youngjae Cho [Tue, 28 Mar 2023 05:39:41 +0000 (14:39 +0900)]
power: Rename enable/disable autosleep to init/exit
The functions below has been renamed:
- power_enable_autosleep() => power_init_autosleep()
- power_disable_autosleep() => power_exit_autosleep()
Those functions are only executed once, after booting done and before
shutting down. Therefore the name init/exit is much proper than
enable/disable. In addition, for the power_init_autosleep(), it has
changed to acquire mainlock before writing "mem" on the
/sys/power/autosleep. This prevents system from going suspend just
after the writing "mem" on /sys/power/autosleep.
Change-Id: Iafe5b4a3507ef983edaaa68735858c57577e24f8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Mar 2023 04:04:30 +0000 (13:04 +0900)]
display: Provide DPMS wrapper via display-panel
Technically DPMS is subject to display-panel. Therefore added wrapper
for DPMS at display-panel.c.
- dpms_get_cached_state()
=> display_panel_get_dpms_cached_state()
- dpms_init()
=> display_panel_init_dpms()
- dpms_exit()
=> display_panel_exit_dpms()
- register_dpms_checklist()
=> display_panel_register_dpms_checklist()
And those existing DPMS functions have been restricted that it is
unable to be accessed from external object file. Plugins who want
deviced service for DPMS must not use DPMS function directly but use
wrapper provided by display-panel.h.
Change-Id: I8359b9b60981be14a03f8b7f89284f0b93596a24
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Mar 2023 01:19:48 +0000 (10:19 +0900)]
display: Move plugin display-panel.c to core
The source code display-panel.c has been relocated:
- src/display/plugin-common/display-panel.c
=> src/display/display-panel.c
Change-Id: I2798e3645e99ee7dd62a14b69ea4be11ab3b12e9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Mar 2023 00:48:44 +0000 (09:48 +0900)]
display: Move plugin display-dpms.c to core
The source code display-dpms.c has been relocated:
- src/display/plugin-common/display-dpms.c
=> src/display/display-dpms.c
The enum dpms_state has been relocated:
- src/display/plugin-common/device-interface.h
=> src/display/display-dpms.h
Change-Id: I194b04061a7f404951f564e13cabdc7ca30a6296
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 23 Mar 2023 05:49:47 +0000 (14:49 +0900)]
display: Move plugin display-backlight.c to core
The source code display-backlight.c has been relocated:
- src/display/plugin-common/display-backlight.c
=> src/display/display-backlight.c
The struct _backlight_ops has been relocated:
- src/display/plugin-common/device-interface.h: struct _backlight_ops
=> src/display/display-backlight.h: struct display_backlight_ops
Currently, the display_backlight_ops is utilized by plugin and it is
registered to display_plugin. Add wrapper for each member function so
that the deviced core can invoke matching plugin function if exist.
- display_plugin_backlight_get_lcd_power()
- display_plugin_backlight_set_brightness()
- display_plugin_backlight_get_brightness()
- display_plugin_backlight_transit_state()
- display_plugin_backlight_transit_brightness()
Change-Id: Ieb93fd50bd9df968d6a3a77556134ea297e60d42
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 22 Mar 2023 04:22:41 +0000 (13:22 +0900)]
display: Move plugin get_var_display_conf() to core
Instead of get_var_display_config(), declare 'g_display_plugin.config'.
- plugin/*/display/core.c: get_var_display_config()
=> src/display/display-config.c: g_display_plugin.config
Fixed existing code into two way in case of 'g_display_plugin.config'
has not been initialized:
- If there has been logic that handling
(g_display_plugin.config == NULL), then followed that logic.
- Otherwise, added assert(g_display_plugin.config). It can spot error
that could be derived from later patches.
This only has been applied to those code that will be a part of display
core, that is, codes under src/display/plugin-common. The codes that
stays in plugin work the way they used to.
Change-Id: I7f65d149298358e2c9116a504fdda952fb9c3963
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 23 Mar 2023 00:54:16 +0000 (09:54 +0900)]
display: Move plugin struct display_plugin to core
The struct display_plugin has been relocated:
- src/display/plugin-common/display-ops.h
=> src/display/display-plugin.h
Added wrapper for each member variable/function of the structure.
Those wrapper access/invoke matching plugin variable/function if exist.
- display_plugin_handle()
- display_plugin_pm_lock_internal()
- display_plugin_pm_unlock_internal()
- display_plugin_pm_change_internal()
- display_plugin_update_pm_setting()
- display_plugin_get_lock_screen_state()
- display_plugin_get_system_wakeup_flag()
- display_plugin_set_system_wakeup_flag()
- display_plugin_device_flags_to_string()
- display_plugin_auto_brightness_control()
The structure's member would grow as more plugin code will move to
the display core. Later, this struct display_plugin and wrapper can
be replaced by plugin-api-deviced.
Change-Id: I2ebc6b77b647764cbc1d4ceb55d17fdc2fee6af1
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 21 Mar 2023 07:38:50 +0000 (16:38 +0900)]
display: Move plugin display_dimstay_check() to core
The display_dimstay_check() has bee relocated:
- plugins/*/display/device-interface.c => src/display/display.c
Change-Id: Ifd8a23ab255d091495d6de25a8d35c933b9c8b39
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 21 Mar 2023 05:48:56 +0000 (14:48 +0900)]
display: Move plugin display.c to core
The list lcdon_ops has been renamed to display_dependent_device_ops and
related operation has been added.
- display_start_dependent_device()
- display_stop_dependent_device()
- display_register_dependent_device()
- display_unregister_dependent_device()
Each operation replaces the previous lcdon_ops code.
The enum brightness_request_e has been moved to display-ops.h that
contains operation of auto_brightness_control.
Change-Id: I04b2b28d42938743fcbe0654461274127b95f010
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 21 Mar 2023 03:59:47 +0000 (12:59 +0900)]
display: Move plugin config-parser to core
The display_load_config() has been relocated:
- display/plugin-common/display.c => display/display-config.c
Change-Id: I82f495090f6814342ce3081b9477c72bd7cf863b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 23 Mar 2023 01:08:06 +0000 (10:08 +0900)]
core: Disable probe() as well as init() in case of disable_auto_init
The disable_auto_init was orignally intended to prevent a module from
being initialized automatically by the deviced's initializing process.
Instead, it gives its initialization responsibility to another module.
Commonly, a pair of core module and its subordinate plugin module use
this disable_auto_init feature. Core module is declared without
disable_auto_init whereas plugin module is declared with it. In this
manner, the core module is automatically initialized by the deviced,
and it triggers its plugin module that wouldn't have been initialized
automatically by the deviced. In this sense, keeping order between core
and plugin module, it is proper to prevent probe() as well as init()
for module declared with disable_auto_init.
Change-Id: Idb9af18342ac205962b50b4188bd8cf965a5be40
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 21 Mar 2023 01:21:16 +0000 (10:21 +0900)]
display: Initialize display core device
The display device is now added to the deviced core translation unit.
The existing display plugin devices are changed not to be initialized
by default. Instead its initialization is triggered by display core
device.
Change-Id: I864b8f7aa594c56076286e2d7d7516bee11f2245
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 21 Mar 2023 00:26:43 +0000 (09:26 +0900)]
display: Relocate display plugin code before separating them into core
Temporarily relocate header and source code:
- src/display -> src/display/plugin-common
All display code are actually included in translation unit of plugin and
built into plugin shared lib. Move them into display/plugin-common in
advance. And later, separate them from plugin translation unit. The
directory, src/display, will comprise display core code, not plugin code.
- src/display/plugin-common:
Temporary directory for display plugin code. Those code will move
into src/display.
- src/display:
Directory for display core code.
Change-Id: I56831630db97d553e6803167e610cfa3d5371168
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 20 Mar 2023 10:00:42 +0000 (19:00 +0900)]
display: Remove unused code
Removed unused get_var_backlight_ops() and MAX() macro.
Change-Id: I872e077f68a5e14153130eef57a3123657fbd4df
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Yunhee Seo [Tue, 7 Mar 2023 08:25:47 +0000 (17:25 +0900)]
display: backlight: Relocate display_backlight_change_brightness_by_dpms_state() to reduce plugin duplication
Remove and redefine backlight_transit_state function in backlight_ops.
This function is added to below display-backlight.
int display_backlight_change_brightness_by_dpms_state(enum dpms_state state)
-> In AOD mode, this function changes brightness smoothly.
Change-Id: Iee3e16ad023fc71a3d1fccbf96dcabfbc156401c
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 2 Mar 2023 11:12:30 +0000 (20:12 +0900)]
display: backlight: Remove restore_brightness_func() to reduce plugin duplication.
restore_brightness_func() was used only for wearable plugin.
It changed set/get/change_brightness functions in backlight_ops depends on lbm mode.
To remove duplicated and redundant code, this functions is removed.
Also, add function changing code to wearable plugin profile.
Change-Id: If4d4d95b5123716fabf7379dca4fdcbc441f5278
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 2 Mar 2023 10:53:27 +0000 (19:53 +0900)]
display: backlight: Relocate display_backlight_set/get/change_brightness() to reduce plugin duplication
Remove and redefine functions in the backlight_ops.
- set_brightness, get_brightness, transit_brt, get_brightness_raw
Wearable profile can have two status of get_brightness lbm_get_brightness/(default)get_brightness
That's why get_brightness_raw was put in backlight_ops to always call (default)get_brightness.
get_brightness_raw can be replaced by display_backlight_get_brightness.
These functions are added to below diplay-backlight.
int display_backlight_set_brightness(int brightness)
int display_backlight_get_brightness(int *brightness)
void display_backlight_change_brightness(int start, int end, int step)
-> With these functions, it is possible to get and set brightness through HAL.
int display_backlight_get_brightness_by_plugin_profile(int *brightness)
-> This function is temporary, it is for handling wearable profile dependency.
To keep original code intent, this is necessary for functions that are dependent on wearable profile.
Change-Id: I0c9cb7675c39094576dd7e42d66d46a29da4144b
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 2 Mar 2023 07:29:09 +0000 (16:29 +0900)]
display: Change get_lcd_power() to dpms_get_cached_state()
To move plugin functions without plugin dependency,
get_lcd_power() should be replaced by dpms_get_cached_state().
However, touchscreen module is dependent on display module build.
Thus, this get_lcd_power() will be changed after resolving build dependency.
Change-Id: I4d58f852cf3da29fe58df4fe3f8b69d954c77959
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 27 Feb 2023 06:30:14 +0000 (15:30 +0900)]
display: Move set brightness with delay function from plugins to core display module
Move plugin static function to core(display module).
This is for moving backlight_ops functions related to brightess without dependency.
int display_backlight_set_brightness_with_delay(int brightness, int delay)
-> This function replaces the static bl_brt function located in plugins.
Change-Id: I4f20da84514cb29e74482980143d09c41354e31b
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 27 Feb 2023 01:59:44 +0000 (10:59 +0900)]
display: Move force_brightness getter and setter from plugin to core display module
Remove and redefine force_brightness getter/setter.
These functions are added below display-backlight.
int display_backlight_set_force_brightness(int brightness)
void display_backlight_get_force_brightness(int *brightness)
-> With these functions, it is possible to get and set for_brightness value.
Change-Id: Ibf93bfd10ac13a462759107598ea95d5c915e610
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Fri, 24 Feb 2023 09:40:55 +0000 (18:40 +0900)]
display: Move display get dpms state function from plugin to core display module
Remove and redefine display dpms state function.
These functions are added to below display-panel.
int display_panel_get_dpms_state(void)
-> This function returns dpms state and replaces get_lcd_power_node located in plugins.
void display_panel_set_dpms_running_state(int val)
-> This function initialize dpms_running_state
Change-Id: I34e29e3477113d2f19835c0782303334ba0d870f
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Fri, 24 Feb 2023 08:17:58 +0000 (17:17 +0900)]
display: Move display blink functions from plugin to core display module
Remove and redefine display blink functions.
These functions are added to below display-backlight.
void display_backlight_set_blink(int timeout)
-> This function set display blink behavior by adding timeout callback.
void display_backlight_unset_blink(void)
-> This function remove blink callback function after DUMP_MODE_WAITING_TIME time.
Change-Id: Iafe293ff9ff8ad65b971885bfd949e037bcffa40
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Fri, 24 Feb 2023 02:31:19 +0000 (11:31 +0900)]
display: Move get_brightness_by_light_sensor function from plugin to core display module
Remove and redefine get_brightness_by_light_sensor function.
This function is added to below display-backlight.
int display_backlight_get_brightness_by_light_sensor(float lmax, float lmin,
float light, int *brightness)
-> This function replaces get_brightness_by_light_sensor function located in plugins.
Change-Id: Ibe17d746276c2f2ca3ba7b233c88c259471aaebe
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 23 Feb 2023 06:47:25 +0000 (15:47 +0900)]
display: Move custom_brightness setter and update function from plugin to core display module
Remove and redefine custom_brightness setter and update function.
These functions are added to below display-backlight.
void display_backlight_set_custom_brightness(int brightness)
-> This function set custom_brightness value.
int display_backlight_update_by_custom_brightness(void)
-> If the conditions are met, this function updates brightness with custom_brightness value.
Change-Id: I4c3662fbdfff4a4b17224ac3af74c4cac1503303
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 23 Feb 2023 05:21:07 +0000 (14:21 +0900)]
display: Move brightness update function plugin to core display module
Remove and redefine backlight_update function.
This function is added below display-backlight.
int display_backlight_update_by_default_brightness(void)
-> This function replaces backlight_update function located in plugins.
Change-Id: I47e2b84a5157beebfc020a62b4508af0f85b52e4
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Wed, 22 Feb 2023 10:13:07 +0000 (19:13 +0900)]
display: Move custom_status getter and setter from plugin to core display module
Remove and redefine custom_status getter/setter.
These functions are added below display-backlight.
void display_backlight_set_custom_status(bool on)
void display_backlight_get_custom_status(bool *on)
-> With these functions, it is possible to get and set custom status.
Change-Id: I353fd29d0d9fcc00504070f42d472c2bb89f3511
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Wed, 22 Feb 2023 05:52:18 +0000 (14:52 +0900)]
display: Move functions related to display status(on/off/dim/standby)
from plugin to core display module
Remove and redefine display status change functions.
These functions are added below display-panel/display-backlight.
int display_panel_set_panel_state_by_on_state(enum device_flags flags)
int display_panel_set_panel_state_by_off_state(enum device_flags flags)
int display_panel_set_panel_state_by_standby_state(bool standby_on)
int display_backlight_set_brightness_by_dim_brightness(void)
-> With these functions, it is possible to change display panel/backlight status.
Change-Id: I4313046c610410ccef82ac18fda1e334960330b1
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Wed, 22 Feb 2023 05:20:53 +0000 (14:20 +0900)]
display: Move default_brightness getter and setter from plugin to core display module
Remove and redefine default brightness getter/setter.
These functions are added below display-backlight.
int display_backlight_set_default_brightness(int brightness)
int display_backlight_get_default_brightness(int *brightness)
-> With these functions, it is possible to get and set default brightness value.
Change-Id: Iaa851094abf051f2fe15c64ff8e94376cc2b6382
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 20 Feb 2023 08:23:16 +0000 (17:23 +0900)]
display: Move getter and setter display frame rate from plugins to core display module
Remove and redefine frame rate getter/setter.
These functions are added below display-panel.
int display_panel_set_frame_rate(int frame_rate);
int display_panel_get_frame_rate(int *frame_rate);
-> With these getter and setter, it is possible to get and set display frame rate value.
Change-Id: Ie12367bbc0177fdfc3119ec059b75ce89f9055d6
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 20 Feb 2023 07:50:57 +0000 (16:50 +0900)]
display: Move getter and setter panel mode from plugins to core display module
Remove and redefine panel mode getter/setter.
These functions are added below display-panel.
int display_panel_set_panel_mode(enum display_panel_mode mode);
int display_panel_get_panel_mode(enum display_panel_mode *mode);
-> With display_panel_mode enum type, it is possible to get and set panel mode type.
Change-Id: Ideb2a6867e79ae7f9e7a51cb6386edcc32244cf4
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 20 Feb 2023 05:54:19 +0000 (14:54 +0900)]
display: Move image effect functions from plugins to core display module
Remove and redefine functions related to display image effect.
These functions are added below display-panel.
int display_panel_set_image_effect(enum display_image_effect effect);
int display_panel_get_image_effect(enum display_image_effect *effect);
-> With display_image_effect enum type, it is possible to get and set image effect type.
Change-Id: I479aa296053ef75b18b4e4b2c3f93e40ecc03191
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Fri, 17 Feb 2023 07:33:47 +0000 (16:33 +0900)]
display: Add display_panel_set_dpms_state function
To move plugin functions without plugin dependency, this temporary function is needed.
int display_panel_set_dpms_state(int dpms_on, enum device_flags flags)
-> This function replaces the bl_onoff function of plugins.
Change-Id: I0720781ba1cb2afeda5e461c1d979d4a9f2ceb4d
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Fri, 17 Feb 2023 08:26:45 +0000 (17:26 +0900)]
display: Add functions related to brightness
Move plugin static functions to core(display module).
This is for moving backlight_ops functions related to brightess without dependency.
int display_backlight_get_max_brightness(int *max_brightness)
-> This function replaces the get_max_brightness function located in plugins.
int display_backlight_get_normalized_brightness(int raw_brightness,
int *normalized_brightness)
-> This function replaces the get_brt_normalized function located in plugins.
Change-Id: I7452f90075ef63acdc8f595fe99d47e0bfe4f4a1
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Youngjae Cho [Thu, 16 Mar 2023 09:51:02 +0000 (18:51 +0900)]
display: Remove unused s-cover(HALL IC) code
Change-Id: If57090427d93e3465264ba9366374cd197ba6a23
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Mar 2023 09:36:22 +0000 (18:36 +0900)]
display: Remove unused code
Change-Id: I4a4a48848d0b9e164f2c820c6086bf653b316b3f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Yunhee Seo [Tue, 14 Mar 2023 08:54:34 +0000 (17:54 +0900)]
power: Use strncpy to avoid the potential problem
sscanf function is detected as risky function in static analysis.
Thus, change the sscanf function to strncpy function.
Change-Id: I44b883eeaeea401dc251577f2bbced4f9ee8c72c
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Youngjae Cho [Fri, 10 Mar 2023 01:53:52 +0000 (10:53 +0900)]
power: Relocate resuming device_notify() properly
The resuming notify should be broadcasted after completely finishing
wakeup transition. In other words, broadcasting should be held when a
transition is waiting for being confirmed by user program. In this
context, it is proper to relocate device_notify() to resume_echo_mem(),
which is invoked on finishing wakeup transition.
Change-Id: I0c924d5667b749f79e95f04b62c69e499ffb7058
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 16 Feb 2023 06:36:14 +0000 (15:36 +0900)]
power: Wake unlock in case of cancelling transition
Properly unlock the secondary wakelock when cancelling transition.
Currently there is no scenario for cancelling wakeup transition though,
it is important when it comes to undoing wakeup and trying to go sleep
again.
Change-Id: I5c4cc65d6bf8453919e0a2624603b8c04f574eb7
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
TaeminYeom [Tue, 14 Feb 2023 03:18:58 +0000 (12:18 +0900)]
display: Add support to select the DPMS type
DPMS (Display Power Management Signaling) is typically done by
requesting window manager. But some devices don't support window manager
and previous DPMS code was written assuming exiting window manager.
So, to support none window manager devices, dpms_ops struct is added.
According to DPMS type configuration, DPMS function can be bypassed.
If a new DPMS function is created later, it can be supported by connecting to dpms_ops.
[New added configuration]
- DisplayDPMSType
: Indicates the type of DPMS. (window_manager or none)
Default value is window_manager
Change-Id: I8a9f254102086b3e22c9498c1604e45c5053b60e
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
TaeminYeom [Wed, 15 Feb 2023 03:00:27 +0000 (12:00 +0900)]
display: Change DPMS init and exit fucntion name
For consistent naming rule with other DPMS function,
change the names.
init_dpms -> dpms_init
exit_dpms -> dpms_exit
add_timer_for_init_dpms -> add_timer_for_dpms_init
delayed_init_done_dpms -> delayed_dpms_init_done
Change-Id: I1de2c9741526238d33c03e815f2ff73fa2a13f9f
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
TaeminYeom [Wed, 15 Feb 2023 08:22:26 +0000 (17:22 +0900)]
display: Change get_var_display_config return type to const
To prevent modify display config static struct in other file.
If it wanted to be modified later, setter will have to be added.
Change-Id: I477fc8476981f18d92509dfb6b2c0783cc7df734
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
Yunhee Seo [Thu, 16 Feb 2023 06:16:07 +0000 (15:16 +0900)]
display: Move white_balance_ops functions from plugins to core display module
Remove and redefine functions related to display white balance work.
Because white balancing is common for display.
Thus, these functions are added below display-panel.
int display_panel_set_white_balance(enum hal_display_white_balance white_balance_type, int value)
int display_panel_get_white_balance(enum hal_display_white_balance white_balance_type, int* out_val)
-> With hal_display_white_balance enum type, it is possible to get and set white_balance values.
Change-Id: I10213315d109e47f0e8c3a58382648ccef3ca2d1
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 16 Feb 2023 05:32:53 +0000 (14:32 +0900)]
display: Add display hal-backend check function
Before plugin to core centralization, display hal backend check is needed.
To move functions without plugin dependency, this temporary function is necessary.
With this, plugin functions can be moved to core(deviced/src/display module).
These functions will be modified during plugin to core centralization.
void display_set_hal_backend_available(bool display_check_hal_backend)
-> With this, while plugin probing, deviced core can know whether hal_backend is
available or not.
bool display_check_hal_backend_available(void)
-> This function is for replacing the display_dev_available variable of plugins.
Change-Id: I1e926da29ab097e08533f73136a2f928daca9167
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Youngjae Cho [Tue, 14 Feb 2023 01:11:34 +0000 (10:11 +0900)]
display: change sleep reason to DISPLAY_OFF_TIMEOUT
Technically, the sleep request of display plugin is triggered by timer,
not by display off itself.
1. Display off, display state is changed to S_LCDOFF.
2. Start timer, 300ms.
3. On expiring the timer, display state is changed to S_SLEEP.
4. The display plugin requests power module to change its state to
DEVICED_POWER_STATE_SLEEP.
Therefore, it is proper to use enum DISPLAY_OFF_TIMEOUT instead of
just DISPLAY_OFF.
Change-Id: I93e6d092ebcc23e09db61f65d8f0b7e4dc5aac7e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 9 Feb 2023 02:33:52 +0000 (11:33 +0900)]
power: skip echo mem if there is pending transition
For echo mem, there could be some pending transitions when it comes to
enter suspend. This is because transition is asynchronously processed.
That is, if there were another transition request during a sleep
transition, the sleep transition should be skipped and take the next
transition immediately. Otherwise, the next transition will handled
after wakeup, which is indefinite.
Change-Id: Ia09a1d1162e21710538f6e9ce7bd1fb3e9c43d0f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 8 Feb 2023 09:50:34 +0000 (18:50 +0900)]
power: add transient scenario from START to SLEEP
Transient scenario for suspending from START to SLEEP has been added.
DEVICED_POWER_STATE_START
|
V
DEVICED_POWER_TRANSIENT_STATE_SUSPENDING_EARLY
|
V
DEVICED_POWER_TRANSIENT_STATE_SUSPENDING
|
V
DEVICED_POWER_TRANSIENT_STATE_SUSPENDING_LATE
|
V
DEVICED_POWER_STATE_SLEEP
Change-Id: I814defb0245e94302746918fa5392ed3a08c64b3
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 8 Feb 2023 09:17:17 +0000 (18:17 +0900)]
power: separate action_for_state() callback
Separated the callback action_for_state() into two type
- pre_action_state()
- post_action_state()
Literally, it only differs when the time it is invoked based on
completing transition, one is before and the other is after finishing
transition.
It is necessary for echo mem. Previously, the action_for_state()
always invoked 'right before' transition completion. As it is echo mem,
system is forced to go suspend within the action_for_state() callback.
After resuming from the suspend, the processing thread still be in the
action_for_state(), which is still not having completed sleep transition.
As a result, a system is waking up but the internal power state is about
to be changed to sleep state. This is contradiction and causes various
undesirable behavior.
To address it, move echo mem to post_action_state(). Unlike the
previous action_for_state(), the post_action_state() is invoked 'after'
the completion of transition. That is, it is natural that waking up
within the post_action_state() as it already has been finished sleep
transition. Thus it won't change the internal state to sleep anymore.
Change-Id: I49e12a19538bdb4241cba34fd536c942257ccaec
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 9 Feb 2023 02:55:25 +0000 (11:55 +0900)]
power: remove unused code
Change-Id: I7f77684552998c5ba5810143cfde854bd56105d2
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 13 Feb 2023 08:46:11 +0000 (17:46 +0900)]
power: get wakeup_reason by calling hal-api
As the previous patch,
- power: update wakeup reason immediately after wakeup
has changed not to maintain wakeup reason after resume, it is necessary
to access it via hal-api for every request for wakeup reason.
Change-Id: Ibf2aebb5b542dd1d55f799be0fbaddf65a6a8e7c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 8 Feb 2023 03:40:14 +0000 (12:40 +0900)]
power: update wakeup reason immediately after wakeup
The wakeup reason would be utilized by callback of device_notify().
Therefore update it on resuming. To prevent the wakeup reason from
lingering, reset it by 0 before returning the function.
Change-Id: I149b2999f14a1c2461098506bd64a242d66937fd
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Yunhee Seo [Tue, 7 Feb 2023 09:28:18 +0000 (18:28 +0900)]
input: add input config file parsing code for touchscreen
Add input config file parsing code for touchscreen input type.
Change-Id: I6b9623760e082ea33b86fa0e4c4eaf3d429a2b38
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 6 Feb 2023 05:14:50 +0000 (14:14 +0900)]
display: add function for broadcasting pmlock state
Add functions to inform/get pmlock state.
When the pmlock node is changed(locked or unlocked), signal will be emitted.
Also, It is possible to get pmlock state with below dbus method.
1. Get pmlock lock state
path: /Org/Tizen/System/DeviceD/Display
interface: org.tizen.system.deviced.display
member: PmlockGetLockState
parameter: "(i)", power lock type to get lock status of pmlock state
return: "(i)", value which means locked or unlocked of pmlock state
Change-Id: I35fe5e882cc22616190a56d18155fcde7aa1b968
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Youngjae Cho [Tue, 31 Jan 2023 09:06:59 +0000 (18:06 +0900)]
power: clarify notion of action callback function
The callback, action_for_state(), now denotes jobs that are necessary
before the target state, that is, it is kind of to-do list for entering
the state.
To this end, the name has been slightnly changed from action_on_state(),
which implies it is invoked right 'after' the state change, to
action_for_state(), which emphasizes it is invoked 'before' the state.
In addition, the position where the variable 'current' is updated has
been relocated to fit into the concept of action_for_state(). That is,
it is updated after the callback.
Change-Id: I47698ce9147c155c0d5e30feed0a60d65d69031b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 20 Jan 2023 06:25:07 +0000 (15:25 +0900)]
power: introduce transition cancelling
Cancelling transition reserves a new transition that undoing the ongoing
transition. That is, the power state will return to the previous state
after finishing the ongoing transition. Additionally with that
reservation, it discards all the pending transitions except one that is
to the poweroff/reboot/exit state.
Change-Id: Ib05841fa91162109db1c05b2f5e0a3e7edd3b90c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 26 Jan 2023 02:35:27 +0000 (11:35 +0900)]
power: change variable name for clear meaning
Change-Id: Ib6342fa303d95a8597a08cb4a1f483f390dc9b75
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Marek Szyprowski [Thu, 19 Jan 2023 07:30:10 +0000 (08:30 +0100)]
usb-gadget: Handle more than one extcon reporting USB cable
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I0c26ac4ecb13f1cd6d0c464a105e1e333b411806
Yunhee Seo [Fri, 27 Jan 2023 01:35:06 +0000 (10:35 +0900)]
tools: devicectl: add handling code to return check
Add handling code to resolve issue reported by static analysis.
Change-Id: I357c4169783b51423c6216a8b7808fbc051bce44
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 26 Jan 2023 11:19:11 +0000 (20:19 +0900)]
power: add handling code to return check
Add handling code to resolve issue reported by static analysis.
Change-Id: I960daea8e8c670579bf2ab0b98cfb5a5842a9b68
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 26 Jan 2023 11:03:28 +0000 (20:03 +0900)]
plugin: iot-headless: input: add handling code to return check
Add handling code to resolve issue reported by static analysis.
Change-Id: Ice9db999cfbd4de35de504dd773fa782a61eca51
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 26 Jan 2023 10:50:04 +0000 (19:50 +0900)]
plugin: iot-headless: display: add handling code to return check
Add handling code to resolve issue reported by static analysis.
Change-Id: I761e84429ad3372a029a7daedd2ef430a1472c23
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 26 Jan 2023 07:36:54 +0000 (16:36 +0900)]
input: add handling code to avoid memory leak issue
Clean-up the reported issue by static analysis.
Change-Id: I474f8974943b74eec769a6dfd2c7199261d6155d
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Wed, 18 Jan 2023 02:12:43 +0000 (11:12 +0900)]
input: add DEVICE_INPUT_TYPE_ALL enum type handling
Add DEVICE_INPUT_TYPE_ALL handling code which was omitted.
With this, it is possible to get all kinds of device ids.
Change-Id: I24a6f4706214fb2963ac6e7a4ad3ae8a4ff58ffb
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Thu, 19 Jan 2023 06:24:23 +0000 (15:24 +0900)]
touchscreen: clean-up uninitialized variable warning by static analysis
Add return code to avoid reaching uninitialized enum variable "state".
Change-Id: Idce5e24bc2c979c350629b8e413494dd62003cf5
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 16 Jan 2023 11:07:13 +0000 (20:07 +0900)]
input: clean-up the useless code and add handling code
add detecting existence of config file and parsing fail condition,
also added input device manager exit condition check
remove useless header line
Change-Id: I16e5e3c82947f444251156e3305067d536a0ece7
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 16 Jan 2023 09:57:51 +0000 (18:57 +0900)]
input: clean-up the reported warning by static analysis
improve code reported warning by static analysis
to avoid memory leak, build warning, unexpected return value issues
Change-Id: Ic9c3435c6515e645b52cdbc5feca223f918f6443
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Yunhee Seo [Mon, 9 Jan 2023 14:18:46 +0000 (23:18 +0900)]
input: add the dbus interface and input config parser
Add input device information dbus methods
Input event on/off option can be handled by device id number.
With config file, user can set the customed input devices
and input-parser will mananging input devices from it.
[InputDeivce] format which is in input.conf
InputDeviceType -> hal_deivce_input_type
InputDeviceId -> id number which exist under the /sys/class/input/inputXX path
InputDeviceName -> device name
InputDeviceDefault -> yes/no
Input dbus methods
1. Get input devices
path: /Org/Tizen/System/DeviceD/Input
interface: org.tizen.system.deviced.input
member: InputGetDevices
parameter: "(i)", input device type to get device id list
return: "(ai)", get int device id list on success, empty list on error.
2. Get default device
path: /Org/Tizen/System/DeviceD/Input
interface: org.tizen.system.deviced.input
member: InputGetDefaultDevice
parameter: "(i)", input device type to get default devicd id
return: "(i)", get device id value on success, negative on error.
3. Get device name
path: /Org/Tizen/System/DeviceD/Input
interface: org.tizen.system.deviced.input
member: InputGetDeviceName
parameter: "(i)", input device id to get device name
return: "(is)", (ret_val, ret_dev_name)
negative ret_val means error, otherwise success.
Change-Id: I0977c29f538f432cb5ab82e610130698ce7ad5b9
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
TaeminYeom [Thu, 5 Jan 2023 08:13:41 +0000 (17:13 +0900)]
display: remove rotation dbus method in headless profile
Display rotation API cannot be used in headless profile
because display feature is false.
So, these methods should be removed.
removed dbus method:
dbus_getrotationangle
dbus_setrotationangle
Change-Id: I10c029136f5e2fa456aac8f839c4dab3532fa1f2
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
TaeminYeom [Tue, 3 Jan 2023 10:53:48 +0000 (19:53 +0900)]
display: Add init direction in rotation angle
init direction means the display direction of degree 0.
It is needed to know physical display state by app.
When deviced boot, it parses the conf file "/etc/deviced/display.conf"
and it saves the initial display is horizontal or vertical.
changed dbus method:
dbus_getrotationangle
path: "/Org/Tizen/System/DeviceD/Display"
interace: "org.tizen.system.deviced.display"
member: "GetRotationAngle"
paremeter: "(i)", display index to get rotation angle.
return: "(iii)", 0 on success, negative on error.
enum display rotation angle to get.
enum display initial direction.
added configuration property:
DisplayInitDirection : "horizontal" or "vertical"
Change-Id: I9a45d06b712a04d79e8614bac5880d4be6fe4fd3
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
Youngjae Cho [Tue, 3 Jan 2023 02:33:31 +0000 (11:33 +0900)]
power: apply suspend to ram by echo mem
Change-Id: Ia68f749de8010ba7fbbb0ae8a29ec8f6d6de7ccf
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 2 Jan 2023 10:58:27 +0000 (19:58 +0900)]
power: move broadcast suspend/resume into power module
Change-Id: I3a9499947866716154dadc1a415578630c60ad7b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Yunhee Seo [Mon, 2 Jan 2023 02:11:11 +0000 (11:11 +0900)]
input: relocate dbus interface initialization
Previous input dbus interface was initialized by input plugin part.
Thus, input dbus interface initialization part is moved to core input module.
Change-Id: Ie786e15b49b20d30e35719e5f5f26dd0a492a4e8
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Youngjae Cho [Tue, 27 Dec 2022 08:25:51 +0000 (17:25 +0900)]
devicectl: add suspend/resume command
Usage: devicectl power suspend|resume reason(int)
#) devicectl power suspend 12345
#) devicectl power resume 2000
The value reason can be an any integer and the devicectl doesn't test
it is valid reason or not. Therefore some listeners of suspend/resume
event might malfunction as they receive a wierd reason.
Change-Id: I62c66e0a8034f9884fd006404991330902ecca21
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 23 Dec 2022 01:17:08 +0000 (10:17 +0900)]
power: reloacte marking poweroff option
Poweroff option can be marked just on receiving the option from dbus
method. It is safer in that it prevents loss of option address due to
asynchronous process of power transition.
Change-Id: I77f7c81035d3281396c0aea0a8c96760f08d5334
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
TaeminYeom [Thu, 29 Sep 2022 04:52:55 +0000 (13:52 +0900)]
display: Add rotation angle interface
rotation angle means "physical display" direction.
Clients can rotate display or check current display angle.
dbus method:
dbus_getrotationangle
path: "/Org/Tizen/System/DeviceD/Display"
interace: "org.tizen.system.deviced.display"
member: "GetRotationAngle"
paremeter: "(i)", display index to get rotation angle.
return: "(ii)", 0 on success, negative on error.
enum display rotation angle to get.
dbus_setrotationangle
path: "/Org/Tizen/System/DeviceD/Display"
interace: "org.tizen.system.deviced.display"
member: "SetRotationAngle"
paremeter: "(iii)", display index to set rotation angle.
enum display rotation angle to set.
enum display rotation direction.
return: "(i)", 0 on success, negative on error.
Change-Id: I792dd4d68034d511443c3c09c5b37bea220bce81
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
Yunhee Seo [Tue, 13 Dec 2022 02:41:35 +0000 (11:41 +0900)]
input: add the input dbus interface
Add a getter and setter function of input device event status
With input device id parameter, it is possible to enable/disable input device event
Input device event getter/setter dbus methods
1. Set input event state
path: /Org/Tizen/System/DeviceD/Input
interface: org.tizen.system.deviced.input
member: InputSetEventState
parameter: "(ii)", input device id to be set event state, value to be set
return: "(i)", 0 on success, negative on error.
2. Get input event state
path: /Org/Tizen/System/DeviceD/Input
interface: org.tizen.system.deviced.input
member: InputGetEventState
parameter: "(i)", input device id to be get event state
return: "(i)", get value on success, negative on error.
Change-Id: I820add4689222198e3cc9a24fd616382800bcf16
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
TaeminYeom [Thu, 1 Dec 2022 08:59:14 +0000 (17:59 +0900)]
power: add getter wakeup reason
Add function to get wakeup reason by calling hal api function
and save wakup reason.
Add dbus method to delliver saved wakeup reason to device API.
"wakeup reason" is the power transition state reason of sleep to normal.
There are several reasons why the device wakeup and
sometimes it Is needed to get the reason.
added dbus method:
dbus_power_get_wakeup_reason
path: "/Org/Tizen/System/DeviceD/Power"
interace: "org.tizen.system.deviced.Power"
member: "PowerGetWakeupReason"
paremeter: "(i)", enum transition reason to get.
return: "(i)", 0 on success, negative on error.
Change-Id: I2f96fecb3bc1308afc712421e3b2f6c8a7efefea
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
Youngjae Cho [Thu, 15 Dec 2022 08:03:14 +0000 (17:03 +0900)]
power: fix data type of transition id
Prevent including garbage at broadcast_transition_info() where an id
is extended to a 64-bit size datatype.
Change-Id: I5aabaecbb3a8dfa5a54aa7bd43248546e731bca6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 14 Dec 2022 09:20:05 +0000 (18:20 +0900)]
power: redefine deviced-exclusive power state enum
Do not use enums from device API for the deviced power module. Instead,
the deviced defines its own enums prefixed with DEVICED_POWER. When the
deviced receives request from device API with API enum, then it is
converted to the deviced enum, and vice versa.
Change-Id: Ic67ba5c1bbbb1fa8335c15fde43cb13e9705eb0c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
TaeminYeom [Mon, 12 Dec 2022 09:05:12 +0000 (18:05 +0900)]
power: Add "DEVICE" or "device" prefix to enum and API
To prevent collision, it is a principle to attach a prefix of project name
in capi project. However, previous codes does not meet it. So, there is
a patch in capi-system-device, and also change the code using them
in deviced.
changed enum:
power_state_e -> device_power_state_e
POWER_STATE_* -> DEVICE_POWER_STATE_*
power_transient_state_e -> device_power_transient_state_e
POWER_STATE_TRANSIENT_* -> DEVICE_POWER_STATE_TRANSIENT_*
POWER_STATE_TRANSIENT_*_EARLY -> DEVICE_POWER_STATE_TRANSIENT_*_EARLY
POWER_STATE_TRANSIENT_*_LATE -> DEVICE_POWER_STATE_TRANSIENT_*_LATE
POWER_STATE_*_INDEX -> DEVICE_POWER_STATE_*_INDEX
POWER_STATE_TRANSIENT_*_INDEX -> DEVICE_POWER_STATE_TRANSIENT_*_INDEX
changed callback:
power_change_state_wait_callback -> device_power_change_state_wait_callback
Change-Id: I38887a0c35f897af2607b4ddf1e167675c1daf72
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
Youngjae Cho [Mon, 12 Dec 2022 02:17:00 +0000 (11:17 +0900)]
power: fix condition for available starting state
The condition for checking queue should have come first. This matters
during a system haven't been initialized, that is before the call of
delayed_init_callback(). Before the delayed_init_callback(), all
requests are enqueued even though transition is not underway. In this
case, it is possible to meet the both condtitions below:
1. there is no ongoing transition
2. there are some enqueued transitions
In this situation, we must select the last state of transition as an
available state. But the previous condition chooses the current state.
Change-Id: If6285e2ca78734378ac9b626947b24ebb3d8594d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 22 Nov 2022 08:27:36 +0000 (17:27 +0900)]
power: introduce transient state
It is able to define transient state between static states. The deviced
always follows those transient states in sequence. It provides some
checkpoints between static states, giving chances for other processes
to sync with each other.
Change-Id: I446083fd1c90610f805a64d61f16defc5a0a9b67
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 22 Nov 2022 08:27:36 +0000 (17:27 +0900)]
power: revamp power module
- Integrate power-state-wait.c into power.c
- Transition is not preemptive anymore
: Previosuly, transitions can cancel and intercept ongoing one.
But it has changed to be enqueued if there is ongoing transition.
It will be handled after handling all the other pending transitions.
Change-Id: Ifbe92098ea4c69f09f744609405dfb1e5e67f75f
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 22 Nov 2022 10:52:02 +0000 (19:52 +0900)]
power: check operation is null
The iot-headless profile has been changed to have display module.
- display: add dummy display for iot-headless
(
1985b78991d1fe925b827ded4fdae58d1b4e1d7a)
Prevent crash on accessing not existing operation.
Change-Id: I601e4cb8412423ed8ecca9d9c022b366e039690e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Yunhee Seo [Thu, 10 Nov 2022 08:12:45 +0000 (17:12 +0900)]
display: add getter/setter function for white balance
Add a dbus/plugin getter and setter function of display white balance which controls RGB gain and offset.
White balancing is adjusting standard point of white color, this because the light source is different for each device.
gain value is a value to be multiplied for RGB value calculation.
offset value is a value to be added for RGB value calculation.
white balancing getter/setter dbus methods
1. Set white balance
path: /Org/Tizen/System/DeviceD/Display
interface: org.tizen.system.deviced.display
member: SetWhiteBalance
parameter: "(ii)", white balance enum type to be set, value to be set
return: "(i)", 0 on success, negative on error.
2. Get white balance
path: /Org/Tizen/System/DeviceD/Display
interface: org.tizen.system.deviced.display
member: GetWhiteBalance
parameter: "(i)", white balance enum type to be get
return: "(i)", value for that white balance type, negative on error.
plugin implementation is referring to this enum type
enum hal_display_white_balance {
HAL_DISPLAY_WHITE_BALANCE_R_GAIN,
HAL_DISPLAY_WHITE_BALANCE_G_GAIN,
HAL_DISPLAY_WHITE_BALANCE_B_GAIN,
HAL_DISPLAY_WHITE_BALANCE_R_OFFSET,
HAL_DISPLAY_WHITE_BALANCE_G_OFFSET,
HAL_DISPLAY_WHITE_BALANCE_B_OFFSET,
};
Change-Id: I972bdb468806b442b221634a166645764c7c2ec9
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>
Youngjae Cho [Wed, 9 Nov 2022 01:39:59 +0000 (10:39 +0900)]
display: remove unused code
It has been removed since
ce471ec18f19bb184848f4c84e813b834ef4bdee.
Change-Id: I5b74f4907bc7e6b9a04f3b3960470fb984446737
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 3 Nov 2022 09:14:19 +0000 (18:14 +0900)]
battery: add missing low battery scenario
Change-Id: Ic99fd153288302d453c3a16c016f9cf432b25217
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 20 Sep 2022 06:45:26 +0000 (15:45 +0900)]
display: add dummy display for iot-headless
For who want cpulock directly via dbus API, not device API on headless
target, add dummy dbus object that receives those request not to emit
error.
Such a weird call, request for display function on headless profile,
is basically because display module provides state locking including
sleep state(cpulock), which should have been handled by power module.
Therefore in the future, moving cpulock from display to power module
should be followed by removing this dummy.
Change-Id: If8f0b449f65832ddf705b9e7ad4e461c20f6a102
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 29 Aug 2022 00:59:18 +0000 (09:59 +0900)]
input: comment out target-specific configuration
Leave configuration itself for use as an example.
Change-Id: I36723a7f6c3014c641bca58faf27c284c6d2a3ee
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 17 Aug 2022 00:58:38 +0000 (09:58 +0900)]
input: add dbus method for testing keyinput
Change-Id: Id59ec92a95335f2f9c142d95b8d1f08a5989887c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Wed, 3 Aug 2022 02:33:50 +0000 (11:33 +0900)]
power: consider bootmode as well as bootreason
Take consideration of bootmode as well as bootreason for the initial
state transition.
Change-Id: I2ba378cbf146215f315b4d413ec4fd4e470cafe1
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 1 Aug 2022 08:49:44 +0000 (17:49 +0900)]
input: define all possible cases of longest powerkey
Change-Id: I98f558f8878bcaa59b4d3d898bfd260143b2a56d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Mon, 25 Jul 2022 04:50:00 +0000 (13:50 +0900)]
battery: redefine battery level threshold
The realoff threshold has been removed and the poweroff level takes
over the role of realoff level.
Change-Id: I887c3a49cd6d251e3c2837b6a123a6d0b190c708
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 12 Jul 2022 01:10:23 +0000 (10:10 +0900)]
power: add getter for power state
Change-Id: I792f01d67adeba213f84003fea4fc506f4f04ad9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Tue, 12 Jul 2022 06:16:53 +0000 (15:16 +0900)]
device-notifier: find existing notifier only
It only finds a notifier that has not been deleted.
Change-Id: Ica945fb57cfe09cf4c82c94e07558abe23704b32
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 17 Jun 2022 00:12:24 +0000 (09:12 +0900)]
battery: remove unreachable code
The fallback for not existing battery hal is technically useless. It
is because if there is no battery backend, the battery module itself
won't be work properly as it cannot know about target dependent
properties.
Change-Id: Iaea07a1ecd47fdf14b13ca9e07d42a28c07357a0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 7 Jul 2022 09:18:59 +0000 (18:18 +0900)]
init: define state transition for bootreason=reboot
Change-Id: I5cf8b2a27688a3fd0c0c550555673e99abcd4495
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 30 Jun 2022 01:46:34 +0000 (10:46 +0900)]
Remove installation of not existing file
The iot-headless-power.so had been removed.
Change-Id: I4d45191e70e354934b5991a7f601afdd79e5ae17
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Thu, 30 Jun 2022 01:29:45 +0000 (10:29 +0900)]
battery: broadcast signal on charger connected/disconnected
Change-Id: Iaef820f91138eddead997f1a3c250d745d8ceb28
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Youngjae Cho [Fri, 24 Jun 2022 07:54:05 +0000 (16:54 +0900)]
battery: remove unnecessary probe for power-supply
It is naturally done by the power-supply module itself. Therefore it
is unnecessary for lowbat module to probe power-supply.
Change-Id: Id18bcea6a1bd9a0aae87c5f6a54815dc74b814b6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>