Jaehoon Chung [Wed, 6 Jan 2021 05:01:03 +0000 (14:01 +0900)]
ARM: dts: meson: add gpio-keys node to use PowerKey
Add gpio-keys node to use PowerKey.
PowerKey - GPIOX_3 <PIN_11>
Change-Id: I99dae986119d4dc355c02b114a318a727134374c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Wed, 6 Jan 2021 05:50:04 +0000 (14:50 +0900)]
tizen: bootscript: rpi3: fix booting issue on 32bit
For 32bit, it should use bootz, but there was typo. Fix the
booting issue on 32bit.
Change-Id: I98ab0cd8cd88f1998c5dd30d649cfc7c4cf0e495
Fixes: commit
01cd50f4c3af ("tizen: rpi: move bootscripts to tizen specific directory")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Tue, 5 Jan 2021 08:06:27 +0000 (17:06 +0900)]
configs: enable SQUASFS configurations
Enable SQUASHFS configuration about reference targets.
It will be used when checking ramdisk image.
Change-Id: I42adf176d352508836b202fecf81f83a09bafd66
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Richard Genoud [Tue, 24 Nov 2020 17:07:52 +0000 (18:07 +0100)]
fs/squashfs: sqfs_close/sqfs_read_sblk: set ctxt.sblk to NULL after free
This will prevent a double free error if sqfs_close() is called twice.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
7e932ac790b3615a67a3c24041c194aa748c0d98]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I31166f8f9d6ec6d4772e7b51b5d0bb8d20ef1a4b
Richard Genoud [Tue, 3 Nov 2020 11:11:26 +0000 (12:11 +0100)]
fs/squashfs: implement exists() function
This permits to find a file and use the distro_bootcmd
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
dd4866b43754b18f0c06672e341d93e16b8bf674]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: Idafbcb37c30445e3731d40924f1c43499f149b1a
Richard Genoud [Tue, 3 Nov 2020 11:11:24 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: remove buggy offset functionality
offset is the offset in the file read, not the offset in the destination
buffer.
If the offset is not null, this will lead to a memory corruption.
So, for now, we are returning an error if the offset is used.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
21b1b3bad58b50e5464b1bf016e7c96bf18ddb8d]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: Ie50645e5fcb2f06a21c8f88e16da9b0d1db35cca
Richard Genoud [Tue, 3 Nov 2020 11:11:23 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: don't write beyond buffer size
The length of the buffer wasn't taken into account when writing to the
given buffer.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
cbd5e40ede4e5c6aedce9475325bdf80b7fa839b]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I14d9af77ac0a2c0d3e52c39824f3854dbbc4d58a
Richard Genoud [Tue, 3 Nov 2020 11:11:22 +0000 (12:11 +0100)]
fs/squashfs: sqfs_probe: use sqfs_decompressor_init() return value
sqfs_decompressor_init() returns a value, so it's better to use it than
to force the return value to EINVAL (it could be ENOMEM)
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
6d25bd3e9c1d317cdbd52a4c6bba11f912bb4d6a]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I7fcad9cd4d7ecb4aff6aa353aee78c7aac69a0e6
Richard Genoud [Tue, 3 Nov 2020 11:11:21 +0000 (12:11 +0100)]
fs/squashfs: sqfs_probe: reset cur_dev/cur_part_info to NULL on error
Resetting the context on error will prevent some checks like:
if (!ctx.cur_dev)
To pass when the probe method has failed
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
56cf1ceee38435a0c105d40336d12d19e1db8b1d]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I998b1fa2d790bf9618d0d652663edb220a32c610
Richard Genoud [Tue, 3 Nov 2020 11:11:19 +0000 (12:11 +0100)]
fs/squashfs: sqfs_probe: fix possible memory leak on error
If SquashFS magic number is invalid, there's a memory leak.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
ccd4c08a452b3703ee16ba730a84b7caadcff97a]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I3be0a354f3407d13902c244580109eb0a9ff71e9
Richard Genoud [Tue, 3 Nov 2020 11:11:18 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: fix memory leak on finfo.blk_sizes
finfo.blk_sizes may not be freed in case of error in the for loop
Setting it to null and freeing it at the end makes prevents that from
happening.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
571b67ee1dcb989dc50575f14e87bfdef6bfd8db]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I97086373caa5a031f3ba12aa4997de3eab10c530
Richard Genoud [Tue, 3 Nov 2020 11:11:17 +0000 (12:11 +0100)]
fs/squashfs: sqfs_get_abs_path: fix possible memory leak on error
if sqfs_tokenize(rel_tokens, rc, rel); fails, the function exits
without freeing the array base_tokens.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
33686804d29e676177d408f1ce047b8c35185ddb]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I377f5aeda3ed3f6b889ce9f9c506629c21f45d3d
Richard Genoud [Tue, 3 Nov 2020 11:11:16 +0000 (12:11 +0100)]
fs/squashfs: sqfs_get_abs_path: fix error check
the return value of sqfs_tokenize(rel_tokens, rc, rel); wasn't checked.
(but "ret" value was !)
This is obviouly a typo.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
53db0e24a8f981c1e303a1c745b8f0e28544096f]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: Ib9ff7ebded9de101a0d929414c8ecdf6137e8621
Richard Genoud [Tue, 3 Nov 2020 11:11:15 +0000 (12:11 +0100)]
fs/squashfs: sqfs_frag_lookup: simplify error handling
For consistency with other functions.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
c9b8e86f8bd238421b35ec15d88b4d3cac8a0992]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: If6a955583f876fe4399982e58ade2784c2da1b30
Richard Genoud [Tue, 3 Nov 2020 11:11:14 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: fix another memory leak
data_buffer was allocated in a loop and freed only once.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
555459e7931f7ae34a4e10d1e21ce7aada7aa59b]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I69dc9bf407d07c7af28f7c3bb1b1b2966f1ee216
Richard Genoud [Tue, 3 Nov 2020 11:11:13 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: fix memory leak
sqfs_closedir() should be called to free memory allocated by
sqfs_opendir()
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
7ce9745cbeae7733a7068f19a7fc3ec8f21dc38c]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I200f764bb6ce2bb828e2217d1b0f949e1db14597
Richard Genoud [Tue, 3 Nov 2020 11:11:12 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: remove useless sqfs_closedir()
as sqfs_opendir failed, there's no need to call sqfs_closedir
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
b34949fe9baaae49003b2981213495bab3afef9b]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: Id61d825b7976f151a77738dadf5c99ba0613d955
Richard Genoud [Tue, 3 Nov 2020 11:11:11 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read: fix dangling pointer dirs->entry
dirs->entry shouldn't be left dangling as it could be freed twice.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
d1d8d75f69f82f7ef7c55b58a7d9e73055956f3c]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: Ie76becc6bfb30341d1964a34154ebe4014def678
Richard Genoud [Tue, 3 Nov 2020 11:11:10 +0000 (12:11 +0100)]
fs/squashfs: sqfs_size: remove useless sqfs_closedir()
as sqfs_opendir failed, there's no need to call sqfs_closedir
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
35475f83a107901551c31f7bc70f5266862a33e4]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I809ae83d5949f86d547b52982cf318e7202a6868
Richard Genoud [Tue, 3 Nov 2020 11:11:09 +0000 (12:11 +0100)]
fs/squashfs: sqfs_size: fix dangling pointer dirs->entry
dirs->entry shouldn't be left dangling as it could be freed twice.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
508a9dc7f694df11c7de7460f888f508e40a2046]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I9f03d0d18e49f3ad0b5b7f1ca6f48625c00e46aa
Richard Genoud [Tue, 3 Nov 2020 11:11:08 +0000 (12:11 +0100)]
fs/squashfs: sqfs_concat_tokens: check if malloc succeeds
memory allocation should always be checked
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
dc3312c43c82ff9335b2bf4ee4f72365e824adfd]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I160a321fe56fc63476d19adbbaa62129daa03f79
Richard Genoud [Tue, 3 Nov 2020 11:11:07 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read_inode_table: fix dangling pointer
inode_table should not be left dangling as it may be freed in sqfs_opendir
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
4c83d2755776d4dd5e15a930d48db1082fc0d1cc]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I0d63396f7885f68140e78623df8e06b8b00049ac
Richard Genoud [Tue, 3 Nov 2020 11:11:06 +0000 (12:11 +0100)]
fs/squashfs: sqfs_search_dir: fix memory leaks
path, target, res, rem and sym_tokens were not free on error nor success.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
cd54591afd42c547f43a7d509862f20e09264cde]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I9417cb0f010dc267eeef4d0ee1aa8ba45a6678bd
Richard Genoud [Tue, 3 Nov 2020 11:11:05 +0000 (12:11 +0100)]
fs/squashfs: sqfs_search_dir: fix dangling pointer
dirs->entry shouldn't be left dangling as it could be freed twice.
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
01e71ec61ab84bcdd4df708f8930d5acf1c2674d]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I51db60ce9c428536c10a72a9ff4a6466629b6a4a
Richard Genoud [Tue, 3 Nov 2020 11:11:04 +0000 (12:11 +0100)]
fs/squashfs: sqfs_read_directory_table: fix memory leak
pos_list wasn't freed on every error
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
7d23b2c5fb093142400467d8b81ba84786ed6f2c]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I152e9c306a194261b7b98e408a02000830194ba1
Richard Genoud [Tue, 3 Nov 2020 11:11:03 +0000 (12:11 +0100)]
fs/squashfs: sqfs_split_path: fix memory leak and dangling pointers
*file and *dir were not freed on error
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
5487477802e0ad7bfad046af25f4a04cfd98cb7a]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I185e3bb66f52d16eb02a2b2076aa723aab5cb753
Richard Genoud [Tue, 3 Nov 2020 11:11:02 +0000 (12:11 +0100)]
fs/squashfs: sqfs_closedir: fix memory leak
sqfs_dirs wasn't freed anywhere.
Reviewed-by: Joao Marcos Costa <jmcosta944@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
87d11e08e4792b3d188143972ba3a1651a52beee]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: Icd463416ec6b70ee90c912faf077d3795f055f29
Richard Genoud [Tue, 3 Nov 2020 11:11:00 +0000 (12:11 +0100)]
fs/squashfs: sqfs_opendir: fix some memory leaks and dangling pointers
When trying to load an non-existing file, the cpu hangs!
Signed-off-by: Richard Genoud <richard.genoud@posteo.net>
[jh80.chung: cherry picked from mainline commit
f268768d43bbf11c7107597abef57c6b86b6b229]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I8273a22d76a36e39cf4ca0f48afd9fd409280217
Gerard Koskamp [Fri, 30 Oct 2020 13:41:58 +0000 (13:41 +0000)]
fs/squashfs: Fix index off by 1 for inode SQFS_LDIR_TYPE
I've created a squashfs file system with Yocto (it use squashfs-tools)
and u-boot command sqfsls give the error:'Error while searching inode:
unknown type.'
After some digging in the code I found that the index is off by 1.
This patch fix this issue and I can successful use the sqfsls command.
After search for the squashfs format I found a link talk about a
similar issue but this time in the documentation. The link is:
https://github.com/AgentD/squashfs-tools-ng/commit/
e6588526838caece9529
Signed-off-by: Gerard Koskamp <gerard.koskamp@nedap.com>
Tested-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
[jh80.chung: cherry picked from mainline commit
c49b0eb034710f08fc68cbfa2c23811e10667ad9]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Change-Id: I02ba72c07ea7c57ebace7103357e2b81bcf48772
Jaehoon Chung [Thu, 31 Dec 2020 06:18:17 +0000 (15:18 +0900)]
tizen: rpi: move bootscripts to tizen specific directory
Move bootscripts from board/raspberrypi/rpi to tizen/bootscript/.
And combine to one script, because those are duplicated almost codes.
Change-Id: I2ee929bbcd6cb68566d441a272a1ba3d84beb100
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 28 Dec 2020 02:25:16 +0000 (11:25 +0900)]
tizen: bootscript: amlogic: support recovery mode
Support recovery mode.
Change-Id: Idf6dca45c0e3636c0579b674223e4af7c59d767f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 28 Dec 2020 02:00:20 +0000 (11:00 +0900)]
tizen: bootscript: amlogic: remove tizen specific kernel loading address
Remove tizen specific kernel loading address.
When it's entered to recovery mode, "Synchronous Abort" is occurred.
Change-Id: I6ff3afc52299b12714a25bb83fe114467c007573
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 28 Dec 2020 01:28:38 +0000 (10:28 +0900)]
tizen: bootscript: amlogic: remove voutmode in bootargs
Remove voutmode in bootargs.
If it's defined, it will be passed from boot_args.
- It's used in only odroid-n2/c4.
Change-Id: I112c4932c31b8e33cdb8c073712f443c5c88c1ac
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Tue, 22 Dec 2020 01:51:15 +0000 (10:51 +0900)]
tizen: script: ignore when no file in output directory
The build output directory can have no file. Ignore when no file
in the output directory.
Change-Id: Ia2ce4c25f7f386915c2606a36d4ea66ca46747e3
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Marek Szyprowski [Mon, 21 Dec 2020 10:25:56 +0000 (11:25 +0100)]
tizen: move Function button check to separate env script
This will make CONFIG_PREBOOT a bit more readable and easier to
understand.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I75d0e42a6b26c7e4c5d7d4818e9e0f450151a1b2
Jaehoon Chung [Mon, 21 Dec 2020 05:06:57 +0000 (14:06 +0900)]
configs: amlogic: check a reboot reason to enter download mode
Check a reboot reason to enter download mode.
If reboot reason is download, it will be entered to download mode.
Change-Id: I9a2223962ad49a19a2b084711107dd23e6c17b95
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 21 Dec 2020 05:06:46 +0000 (14:06 +0900)]
ARM: meson: add a reboot reason about DOWNLOAD
Tizen is using "reboot download" as download mode.
Change-Id: Ia53d1605982957bc2388552e81c4d3cd99eac1e8
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Łukasz Stelmach [Fri, 18 Dec 2020 19:11:50 +0000 (20:11 +0100)]
tizen: make version parsing insensitive to message tranlations
Localised versions of version messages present version number at different
positions. Matching numbers with grep(1) ensures that version number is
extracted properly regardles of the message format.
Change-Id: I6dd4bc476aaa43c1a736f269dc14910d8653b730
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Marek Szyprowski [Fri, 18 Dec 2020 10:32:32 +0000 (11:32 +0100)]
ARM: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
For the proper reboot Odroid-C4 board requires to switch TFLASH_VDD_EN
pin to the high impedance mode, otherwise the board is stuck in the
middle of loading early stages of the bootloader from SD card.
This can be achieved by using the OPEN_DRAIN flag instead if the
ACTIVE_HIGH, what will leave the pin in input to achieve high state (pin
has the pull-up) and solve the issue.
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Change-Id: Id91d0c5e354ed58fcba3b2e8a5ebe7f2953f2142
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Marek Szyprowski [Fri, 18 Dec 2020 14:32:10 +0000 (15:32 +0100)]
Revert "ARM: meson: Temporary fix for OdroidC4 SD card reboot issue"
This reverts commit
394a3fc1a2f2ab0eb61dc32231cb94e8ed55e845.
It will be replaced by a patch accepted in mainline uboot.
Change-Id: If335526aee08221fcbcd200fb7dbc4b7635d5415
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Marek Szyprowski [Mon, 14 Dec 2020 07:33:30 +0000 (08:33 +0100)]
tizen: vim3(l)_deconfig: enable THOR mode if Func button is pressed
Extend the preboot script with a check of the Func button state. If it is
pressed, enter the THOR download mode.
Change-Id: Ic026c345078adbd9030b65e250b18afcc171553b
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Heinrich Schuchardt [Mon, 14 Sep 2020 10:50:56 +0000 (12:50 +0200)]
cmd/button: return button status
To make the button command useful in a shell script it should return the
status of the button:
* 0 (true) - pressed, on
* 1 (false) - not pressed, off
The button command takes only one argument. Correct maxargs.
Adjust the Python unit test.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
[backport of mainline commit
a6bfd71a96201127836d59736abcb54dc2d5e1a5]
Change-Id: Ic799b7e189e3fb6793083a92b2ceadb0f5884889
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Marek Szyprowski [Wed, 16 Dec 2020 07:24:37 +0000 (08:24 +0100)]
Revert "tizen: vim3(l)_deconfig: enable THOR mode if Func button is pressed"
This reverts commit
0548fab316eac104e8cdd77cb505407facfbc115.
This commit will be changed to use the solution applied in mainline
uboot.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I8a01980a0f134ac427aeee8af921bce540fbebd3
Marek Szyprowski [Wed, 16 Dec 2020 07:24:21 +0000 (08:24 +0100)]
Revert "cmd: button: store button state in the 'button' env"
This reverts commit
5c353ca0b9e417b5f0d0705cc47abc090254a2e4.
It will be replaced by the other solution backported from mainline uboot.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ibe99ff758273bee72058e83aeeb963f9f456529d
Seung-Woo Kim [Fri, 18 Dec 2020 04:43:35 +0000 (13:43 +0900)]
tizen: script: fix wrong indent for case
There are unmet indent for case statement. Fix the wrong indent.
Change-Id: Iafb7e9586c5b401f481cef5afbc879c8f12f90e2
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Wed, 16 Dec 2020 04:33:24 +0000 (13:33 +0900)]
lib: tizen: fix build error with tizen_defconfig
Fix build error with tizen_defconfig.
tizen_defconfig doesn't support DM_VIDEO.
Change-Id: Ie86a45e97c8d8c4c70e13dfaba70f23b0bdccd93
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 15 Dec 2020 22:27:39 +0000 (07:27 +0900)]
samsung: tizen_amlogic: update loglevel from 4 to 7
Update loglevel from 4 to 7.
It's useful that can see more log message because of kernel isn't stable.
In future, it will be restore to 4.
Change-Id: I162b3a049acd1a6765b4c7f9e5ce610fce238e59
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Marek Szyprowski [Mon, 14 Dec 2020 07:33:30 +0000 (08:33 +0100)]
tizen: vim3(l)_deconfig: enable THOR mode if Func button is pressed
Extend the preboot script with a check of the Func button state. If it is
pressed, enter the THOR download mode.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I9277c071b9cd9714f0c7858b9ad69ed4ea47ae25
Marek Szyprowski [Mon, 14 Dec 2020 09:26:39 +0000 (10:26 +0100)]
cmd: button: store button state in the 'button' env
Save examined button state in 'button' environment variable to enable
checking button state in the scripts.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I78b539e1516573fcfea4401f75469291844daae4
Marek Szyprowski [Mon, 14 Dec 2020 09:29:47 +0000 (10:29 +0100)]
button: add a simple ADC-based button driver
Add a simple ADC-based button driver. This driver binds to the 'adc-keys'
device tree node.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I6da7101eff3ce53766d899f49f5839d728d52fb3
Marek Szyprowski [Mon, 14 Dec 2020 10:18:42 +0000 (11:18 +0100)]
adc: meson-saradc: skip hardware init only if ADC is enabled
The driver skips hardware initialization if it is already configured by
the earlier bootloader stage (BL30). Skip the initialization only if the
hardware is really initialized and enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I3e2e2d270ad3e7e7f38e2bc3ce2a924a47b164af
Marek Szyprowski [Mon, 14 Dec 2020 10:06:59 +0000 (11:06 +0100)]
adc: meson-saradc: add G12A variant
Add support for the SARADC variant found on the G12A SoCs family.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: If519d333e9773d089f37a8c7b4ccb144be68925b
Marek Szyprowski [Mon, 14 Dec 2020 07:33:30 +0000 (08:33 +0100)]
clk: meson: add minimal driver for g12a-ao clocks
Add minimal driver AO clocks on meson G12A family. Only ADC related clocks
are supported.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I0c91848bc55493e19570db333e7da6020d687907
Marek Szyprowski [Thu, 10 Dec 2020 13:55:46 +0000 (14:55 +0100)]
tizen: bootscript: amlogic: restore ${opts} support
After unification of the Amlogic based boards boot scripts, support for
appending ${opts} to kernel cmdline has been lost. Restore it to make the
kernel debugging easier.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I531822612f31a473019d45c832cb8726aea51060
Marek Szyprowski [Thu, 10 Dec 2020 10:35:31 +0000 (11:35 +0100)]
usb: dwc3-meson-g12a: always configure dr-mode
dwc3_meson_g12a_force_mode() sets the dr-mode of the USB PHY. However
it skips setting the mode if it matches the one done during driver probe
(stored in private structure). This fails if the mode has been changed
to other value and then back to initial one. Fix this by configuring the
dr-mode always, regadless of the one set at the driver probe).
This fixes operation of USB gadget based drivers when they are initialized
for the second time.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I5188ca7cccf8e9b05a6cae9fd2b6f9d55fc75cb7
Jaehoon Chung [Wed, 9 Dec 2020 10:33:04 +0000 (19:33 +0900)]
samsung: tizen_rpi: add hal.img in dfu information
Add hal.img in dfu information.
It's for just prepering to thor download.
- Avoid to fail thor protocol when hal image is created.
Change-Id: I78df372fc0bfa260d120c16c59a4b7bfd6fdddcf
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 9 Dec 2020 09:21:44 +0000 (18:21 +0900)]
meson: add TIZEN_AMLOGIC_USE_VENDOR_KERNEL config
Add TIZEN_AMLOGIC_USE_VENDOR_KERNEL config.
It's more claar than just using CONFIG_TIZEN.
If someone wants to use mainline kernel, just disable it.
Enable CONFIG_TIZEN_AMLOGIC_USE_VENDOR_KERNEL.
- odroid-{c4,n2}_defconfig
- khadas-{vim3,vim3l}_defconfig
Tizen is using each board's vendor kernel.
Change-Id: I2a11e3e08e58ced7ef286487044a1616ac3ac8f4
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Sylwester Nawrocki [Tue, 8 Dec 2020 18:28:58 +0000 (19:28 +0100)]
lib: tizen: Add support for thor status notifications on video console
This patch implements thor flashing progress bar and status notifications
on graphics console.
Change-Id: Iba4945ae26358936de1e1847d0095f97e6ab3498
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Wed, 25 Nov 2020 17:54:28 +0000 (18:54 +0100)]
thor: Add API for thor status notifications
This patch adds an empty by default thor_status_notify() function which
can be reimplemented as required and which allows to add notifications
of thor status and flashing progress, e.g. on external monitor.
Change-Id: Ic1eaad7f3f5adbca404162b745a9287d5a9ae247
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Marek Szyprowski [Mon, 7 Dec 2020 13:33:54 +0000 (14:33 +0100)]
amlogic: vim3: add code for reading ethernet MAC address from efuse
Add a simple code for reading built-in ethernet MAC address from efuse.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ic1c39da270bc58f3b8e89a0631494e779281d46d
Jaehoon Chung [Mon, 7 Dec 2020 03:42:46 +0000 (12:42 +0900)]
packaging: u-boot-amlogic: add a spec file for all amlogic boards
Add a spec file for all amlogic boards.
- It will be provided u-boot-{n2,c4,vim3,vim3l} packages
- Remove each spec files
Change-Id: Ic4f8ab6f5608fbe8606fdc3cca591e53c7bdfe18
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Mon, 7 Dec 2020 06:13:15 +0000 (15:13 +0900)]
configs: put a space to sys prompt in odroid-{c4,n2}_defconfig and khadas-vim3(l)_defconfig
Like all other targets, put a space to sys prompt.
Change-Id: Ie106f61406b686dfc7ec98079cb6adf96a7d6fff
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Sun, 6 Dec 2020 23:39:05 +0000 (08:39 +0900)]
common: splash_source: fix -Wint-to-pointer-cast warning
Fix -Wint-to-pointer-cast warning
common/splash_source.c: In function 'splash_load_raw':
common/splash_source.c:100:12: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
100 | bmp_hdr = (struct bmp_header *)bmp_load_addr;
| ^
common/splash_source.c: In function 'splash_sf_read_raw':
common/splash_source.c:39:47: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
39 | return spi_flash_read(sf, offset, read_size, (void *)bmp_load_addr);
| ^
Change-Id: I3ab5875a7c33c0b22b2824dc8534dafcf70abd26
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Marek Szyprowski [Tue, 1 Dec 2020 17:38:51 +0000 (18:38 +0100)]
configs: Enable options for splash image in odroid-{c4,n2}_defconfig
These options are needed for the splash image loading.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I892b493a1f1d2509649a8cca59d25c62b3613332
Sylwester Nawrocki [Wed, 2 Dec 2020 15:32:54 +0000 (16:32 +0100)]
tizen: amlogic: Add hdmimode env variable
The hdmimode variable set to "1080p60hz" value allows the HDMI driver
to switch to default full HD timings for QHD/UHD monitors and such
monitors can still be used in lower resolution mode.
This a workaround until proper support for QHD/UHD is implemented
in the VPU driver.
The new variable is also used in kernel bootargs.
Change-Id: Ib1b58ee9173fa380c1c79bf819b0ffaca1a6aab9
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Wed, 25 Nov 2020 19:13:55 +0000 (20:13 +0100)]
video: meson: Add fallback to default timings for QHD/UHD monitors
The HDMI driver currently supports only up to 1920x1200 resolutions
and QHD/UHD monitors might not specify detailed timings in EDID other
than those for their maximum resolution, even though they work with
lower resolutions like full HD. In such cases display_read_timings()
will fail breaking the video output driver initialization.
As a workaround fallback to full HD timings is added for QHD or UHD
monitors. The default timing will only be used when "hdmimode"
environment variable is set to "1080p60hz", otherwise the driver
switches to CVBS mode as before, when display timings are
unsupported/could not be read.
The proper solution would be to implement support for 2K/4K HDMI
modes, which are also not supported yet by driver in the kernel.
Change-Id: I407228392a6b1b6e8b0c55a6962235111df0c69c
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Wed, 2 Dec 2020 09:37:27 +0000 (10:37 +0100)]
tizen: Add splash image file to the bootloader tar image
Change-Id: Ie3e1f76a663eddb65887ec42c651dedbd6b07f81
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Tue, 1 Dec 2020 17:38:51 +0000 (18:38 +0100)]
configs: Enable options for splash image in khadas-vim3(l)_defconfig
These options are needed for the splash image loading.
Change-Id: Ieeddd2e2d9ff6872297b9eb3f3d899702ee717a7
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Thu, 26 Nov 2020 16:42:18 +0000 (17:42 +0100)]
tizen: amlogic: add CONFIG entries for splash image loading
These options are needed for decompressing the logo image file
(gzipped BMP).
Change-Id: Ieb3c35adf5007e2f795f2cecc3cf365e7a40b629
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Thu, 26 Nov 2020 18:45:01 +0000 (19:45 +0100)]
configs: tizen_amlogic: Add environment variables for splash image
Set the splash file location, bmp image load address and logo position
on the display.
The compressed bitmap file should be installed on first mmc partition.
Change-Id: Ic1ce517460beaf318821f53ed3adbe6c41e091e8
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Tue, 1 Dec 2020 17:37:40 +0000 (18:37 +0100)]
packaging: u-boot-vim3(l): Add tizen logo bitmap file
This image will be used as u-boot splash image.
Change-Id: I262cc2219435afc7c8f208ff39b2bf7cce6a636c
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Sylwester Nawrocki [Wed, 2 Dec 2020 08:36:29 +0000 (09:36 +0100)]
gitattributes: Set binary attribute for *.gz and *.png files
After commit ("1f35137 Add .gitattributes for line endings") all files
have text attribute set and we need such change to ensure content of
the *.gz and *.png files remains unmodified.
$ git check-attr -a -- *.gz *.png
*.gz: binary: set
*.gz: diff: unset
*.gz: merge: unset
*.gz: text: unset
*.gz: eol: lf
*.png: binary: set
*.png: diff: unset
*.png: merge: unset
*.png: text: unset
*.png: eol: lf
Change-Id: Ie7b1d48761c01c045bdcdae3b0ac66e64af79326
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Marek Szyprowski [Thu, 26 Nov 2020 14:32:03 +0000 (15:32 +0100)]
tizen: enable support for formatting MBR partition layout during flashing
This is ensured by the following steps:
1. enable 'mbr' command and provide default partiton layout,
2. add support for formating block device from THOR downloaded script,
3. check MBR partition layout on boot and enter THOR mode if invalid
4. provide a script for formating MBR for THOR download
MBR partition layout is checked on boot if it mathes the one defined
during u-boot compilation. If not, set dfu_alt_info to the minimal safe
list and enter THOR download mode to flash the new, proper partition
layout and the complete Tizen image.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I490e5b3314513012259f3981feae047f95649c3b
Marek Szyprowski [Fri, 27 Nov 2020 15:10:34 +0000 (16:10 +0100)]
thor: add support for dfu_alt_info reintialization from the downloaded script
Reinitialize dfu_env_entities after flashing the 'SCRIPT' entity to
ensure that the potential changes to the 'dfu_alt_info' environment
variable are applied.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Iad98f348d25ee37fbb7493d4e567d1a4de55dc2c
Marek Szyprowski [Wed, 2 Dec 2020 12:56:19 +0000 (13:56 +0100)]
dfu: add support for dfu_alt_info reintialization from the flashed script
Reinitialize DFU USB gadget after flashing the 'SCRIPT' entity to ensure
that the potential changes to the 'dfu_alt_info' environment variable are
applied.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ia5025c765c83defc96da17b8c059dff833ec257b
Marek Szyprowski [Fri, 27 Nov 2020 15:08:28 +0000 (16:08 +0100)]
dfu: add 'SCRIPT' entity support
Define a new 'SCRIPT' type for DFU entities. The downloaded data are
treated as simple u-boot's scripts and executed with run_command_list()
function.
Flashing the 'SCRIPT' entity might result in changing the 'dfu_alt_info'
from that script. Add a global variable for tracking the potential need
to reinitialize the dfu_alt_info structures.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I8b43528ba82c4aecf5e84bbcb6ce1ca7b7621075
Marek Szyprowski [Thu, 26 Nov 2020 14:27:00 +0000 (15:27 +0100)]
cmd: Add MBR partition layout control utility
Add a 'mbr' command to let user create or verify MBR partition layout
based on the provided text description. The partition layout is
altearnatively read from 'mbr_parts' environment variable. This can be
used in scripts to help system image flashing tools to ensure proper
partition layout.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I8fd4d79a630296d41567e6288b6b4e4d083f7648
Marek Szyprowski [Thu, 26 Nov 2020 14:25:01 +0000 (15:25 +0100)]
part: dos: add code for creating MBR partition layout
Add code for creating and writing MBR partition layout. The code generates
similar layout of EBRs (Exteneded Block Records) and logical volumes as
Linux's fdisk utility.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I52724de45f32cdde43d900e586d30831906f9280
Marek Szyprowski [Thu, 26 Nov 2020 14:23:41 +0000 (15:23 +0100)]
disk: dos: make some functions static
Make function not used outside this file static.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I37039841c3a1530d5a81e5917f2f497b3bedcbbc
Marek Szyprowski [Thu, 26 Nov 2020 14:22:32 +0000 (15:22 +0100)]
disk: dos: use generic macro for unaligned le32 access
Use a generic helper for reading LE32 integers.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Iafa317eec51629733b1fac645b96a749845edd08
Marek Szyprowski [Thu, 26 Nov 2020 14:19:54 +0000 (15:19 +0100)]
disk: dos: add some defines for the hardcoded numbers
Add handy defines for some hardcoded magic numbers related to extended
partition handling.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ibcd229cc2782d2ca37601ca035afc467c589850e
Marek Szyprowski [Thu, 26 Nov 2020 06:08:02 +0000 (07:08 +0100)]
disk: dos: rename write_mbr_partition to write_mbr_sector
write_mbr_partition() function name is a bit misleading, so rename it to
write_mbr_sector(). This is a preparation for adding code for writing a
complete MBR partition layout.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ifd90eb8c2584f7474b9a19e917eac24ad1b03013
Marek Szyprowski [Thu, 3 Dec 2020 16:49:23 +0000 (17:49 +0100)]
tizen: build-amlogic: add support for building images for all boards
Add 'all' target for build-amlogic.sh to build images for all supported
boards and pack them to the common amlogic_bootloader.tar.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I691672d454850e50e04c64a20c2f960ca83c709e
Marek Szyprowski [Thu, 3 Dec 2020 16:24:30 +0000 (17:24 +0100)]
tizen: bootscript: amlogic: use proper string comparison operator
The proper string comparison operator for u-boot's test is '='.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ic7a3f5f6b456631473df94e311694774651c4144
Marek Szyprowski [Thu, 3 Dec 2020 10:57:48 +0000 (11:57 +0100)]
tizen: limit boot to MMC0 and MMC1 devices
Other types of boot are not supported on Tizen, so disable generating
scripts and envs for them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ibe41e9ff8e60aa6949f4a082276083adde33e187
Marek Szyprowski [Thu, 3 Dec 2020 10:55:29 +0000 (11:55 +0100)]
tizen: avoid doubled entries in params.bin
Disable generating entries (re)defined in tizen_amlogic.h to avoid
confusing user, which one is valid.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I123c58b8fb71320e20815bbb0eebb3cb3b5c5a9e
Heinrich Schuchardt [Thu, 8 Oct 2020 18:51:24 +0000 (20:51 +0200)]
tools: image-host.c: use correct output format
When building on a 32bit host the following warning occurs:
tools/image-host.c: In function ‘fit_image_read_data’:
tools/image-host.c:296:56: warning: format ‘%ld’ expects argument of
type ‘long int’, but argument 3 has type ‘__off64_t’
{aka ‘long long int’} [-Wformat=]
printf("File %s don't have the expected size (size=%ld, expected=%d)\n",
~~^
%lld
filename, sbuf.st_size, expected_size);
~~~~~~~~~~~~
tools/image-host.c:311:62: warning: format ‘%ld’ expects argument of
type ‘long int’, but argument 4 has type ‘__off64_t’
{aka ‘long long int’} [-Wformat=]
printf("Can't read all file %s (read %zd bytes, expexted %ld)\n",
~~^
%lld
filename, n, sbuf.st_size);
~~~~~~~~~~~~
Fix the format strings.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[jh80.chung: cherry picked from mainline commit
3311eda658e0]
Change-Id: I5ed82a5c3d876a56d6b9ac75598eeed2d2b85d2a
Marek Szyprowski [Tue, 1 Dec 2020 09:36:03 +0000 (10:36 +0100)]
tizen: remove generic params.bin and u-boot.bin
The generic entity params.bin is no longer functional, so remove it. Also
remove generic entity for the u-boot.bin to force user to use proper
board specific image.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I6820c9b7fad7259525ae5ec59cae667e0482d680
Marek Szyprowski [Mon, 30 Nov 2020 14:13:51 +0000 (15:13 +0100)]
tizen: sanitize file names for VIM3(l) boards
Use only the board name (vim3/vim3l) in file names (i.e. u-boot-vim3.bin)
like it is done for odroid boards (i.e. u-boot-c4.bin).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ia8e4cca3bc96cd1408b75c2bae4d2a29ccd41160
Sylwester Nawrocki [Wed, 25 Nov 2020 11:13:12 +0000 (12:13 +0100)]
video: Fix line padding calculation for 16 and 24 bpp bitmaps
The line size in the bitmap file is multiple of 4 bytes. In current code
the complement of row size to a multiple of 4 bytes is further unnecessarily
multiplied by the pixel size. This result in incorrect displaying of bitmaps
with image width which is not multiple of 4 pixels. Fix this by removing
the unnecessary multiplication.
Tested with 24BPP bitmap and XRGB32 display.
Change-Id: I9bd307780e388a70f47823444fe3ecdf910d08fb
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Marek Szyprowski [Mon, 30 Nov 2020 13:14:04 +0000 (14:14 +0100)]
tizen: unify build script for all boards
Use the same build script for all Amlogic boards.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I69565c89e3960bbe353545df217f5e81d00465a4
Jaehoon Chung [Mon, 30 Nov 2020 03:33:22 +0000 (12:33 +0900)]
tizen: amlogic: change a params name to postfix of each board's name
Chagne a params.bin name to postfix of each board's name and location
to root directory.
Also changed the kernel directory from each boardname to kvim/odroid.
Change-Id: I0468f0894d7220cc55b64885c8c411f2c5340606
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 27 Nov 2020 08:24:22 +0000 (17:24 +0900)]
packaging: amlogic: use one boot.scr.uimg script
Use one boot.scr.uimg instead of each scsripts.
To prevent conflict, move to boot.scr.uimg after installed each script.
Also change the place of boot.scr.uimg in build script.
Change-Id: Ia7d0746062f6d548ae1fb36a7111d55d353a1545
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 27 Nov 2020 02:11:09 +0000 (11:11 +0900)]
tizen: bootscript: amlogic: calculate tizen_kernel_add_r with ramdisk's size
Calculate tizen_kernel_addr_r with ramdisk's size.
It cat be prevented to overwrite the images.
Change-Id: If766b514e40865c3a531c3ebbe75f6b7a6898b2a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 27 Nov 2020 02:11:03 +0000 (11:11 +0900)]
configs: enable CONFIG_SETEXPR config
Eanble CONFIG_SETEXPR configuration.
Change-Id: If1255fabae584b17e176fb7d8cbc0324ac2b3902
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 26 Nov 2020 01:06:11 +0000 (10:06 +0900)]
packaging: u-boot-kvim3l: add kvim3l spec file
Add kvim3l spec file for khadas-vim3l.
Change-Id: Ie7ddaaab70a3218a81927ccef9953bdb41e4eb52
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 25 Nov 2020 23:12:45 +0000 (08:12 +0900)]
tizen: bootscript: create one bootscript for amlogic boards
Create one bootscript for amlogic boards.
There is a common variable to use about each boards. So it can be
reused.
Remove each bootscript files. Instead, use one script file with
board_name.
Change-Id: If50529fc1f34f3ac274ce8a0955499f3e3e12d22
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 25 Nov 2020 10:30:44 +0000 (19:30 +0900)]
tizen: bootscript: remove vim3l boot script
Remove vim3l boot sript.
Instead, use tizen-boot-khadas-vim3-64b.scr.
In future, it can be used one image after combined other amlogic script.
Change-Id: Ifa16622ca0507db6b61720d7cddd3bd66bfbb07f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 25 Nov 2020 10:19:55 +0000 (19:19 +0900)]
tizen: bootscript: remove fdtfile in boot script
Remove fdtfile in boot script file.
Move fdtfile variable from bootscript to tizen_amlogic header.
Change-Id: I7c87253eab09332e6ab73e5174bf93a95fde60f7
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 25 Nov 2020 09:31:13 +0000 (18:31 +0900)]
tizen: bootscript: move boot scripts under bootscript directory
Move each bootscript files to tizen/bootscript directory.
It's more easier to maintain which boot script is used for tizen than now
Change-Id: I435fdf8352195091763226fdbb05b844219f5842
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>