device: Change profile version from header files

As profiles are integrated, there is no need to mark versions separately.
Thus, the version has been changed based on mobile.

Change-Id: I22bdc4c1910f9d890a4c28fbea82b2e2a4f2faf4
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

power: Add callback parameter check

When the callback parameter is null, it causes abnormal operation.
To avoid this, callback parameter check is necessary.

Change-Id: I5bfdf967ed5abea9563cbe070d8157b47d5ec7b0
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

power: Add type casting to support architecture-independent API porting.

At first, in the 32bit architecture, power state enum value is treated as 4 byte.
Thus, when dealing with enum value, the type should be converted to unsigned int or int.
Especially, this is necessary for C# API porting in the 32bit architecture to avoid abnormal operation.
However, when the device_power_change_state uses dbus call, it treats enum value as uint64_t in the g_variant type.
To make correct type conversion in g_variant, uint64_t type conversion is needed also.

Change-Id: I2e9ef7a715ca5beb13f358e183f5b054cff86ce1
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

device: Add lcov exception code

Add line coverage exception to below cases.
1. Internal API and functions used only in internal functions.
2. Profile specific functions that are not common profile.(ex - mobile, wearable...)
3. Error handling code section.
4. Not supported feature functions in the line coverage test environment.(ex - battery, haptic, ir, led...)
    - Above features are false by default in the line coverage test environment.

Change-Id: I4e3a1c939aa26305a1b4c376bae6e905e2325e58
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

power-internal: Exclude only device_power_get_wakeup_reason() on a specific profile

The previous patch(733acf) excludes the whole power-internal.c/.h when
they are built on a specific build envrionment. In such case, however,
there were other pakages dependent on the power-internal.c/.h, making
build error. Thus, instead of excluding the whole power-internal.c/.h,
exclude only the function device_power_get_wakeup_reason() from building.

Change-Id: Ib7474394246cf2d4e48b9ca312546f1970348ce9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Exclude internal source/header from specific build environment

The device_power_get_wakeup_reason() of the public internal function
is duplicate on some profile environment. Therefore exclude it from build
within a specific environment.

Change-Id: I4b585d2632f22cc8b948e397fb0bb2db8eac5fdc
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: Remove unused holdkeyblock code

Change-Id: I641a7aad31906efdd966c74686288f7ebb8ba980
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

display: Add close comment to keep doxygen group format

Add close comment to keep doxygen group format.

Change-Id: I78bf5d26321c8068ba0f30d4ca844e8619d933fd
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

input: add DEVICE_INPUT_TYPE_TOUCHSCREEN enum type

Add DEVICE_INPUT_TYPE_TOUCHSCREEN type to support touchscreen input device.

Change-Id: Ic1afd8a9da915ccca88ede857b59520a7b2f61d7
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

power: add callback for tracking power lock state

Add functions to tracking power lock state.
In this context, power lock state is meaning of "locked or unlocked"
about specific power lock type.
When the registered(specific) power lock is changed,
callback function will be called.

To inform power lock status, this enum type will be used.
typedef enum {
DEVICE_POWER_LOCK_STATE_UNLOCK, /**< Power lock is unlocked */
DEVICE_POWER_LOCK_STATE_LOCK, /**< Power lock is locked */
} device_power_lock_state_e;

These are function prototype to be added.
typedef void (*device_power_lock_state_change_callback) (power_lock_e power_lock_type,
device_power_lock_state_e power_lock_state, void *user_data);
-> This callback will be called when the registered power_lock_type lock is changed.

int device_power_get_lock_state(power_lock_e power_lock_type,
device_power_lock_state_e *power_lock_state);
-> This function gets the status(locked or unlocked) of power_lock_type

int device_power_add_lock_state_change_callback(power_lock_e power_lock_type,
device_power_lock_state_change_callback power_lock_state_change_callback,
void *user_data);
-> This function register callback with parameter power_lock_type.

int device_power_remove_lock_state_change_callback(power_lock_e power_lock_type);
-> This function remove registered callback with parameter power_lock_type.

Change-Id: I1e2449dfdf4a27caa03d0c8a6000606ef90b31f8
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

power: add API for cancelling transition

The cancelling API would trigger the opposite transition of the ongoing
transition, for example, if the ongoing transition is from
DEVICE_POWER_STATE_NORMAL to DEVICE_POWER_STATE_SLEEP, then transition
from DEVICE_POWER_STATE_SLEEP to DEVICE_POWER_STATE_NORMAL will follow
after calling cancelling API.

Change-Id: Ife624cd61f28ee7a5ab46b0e5dc0c0089b0aa72a
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

display: change not use sensor in rotation API

Initial design is using sensor when there is no
display rotation module in device.
But the spec was changed because of newly added parameter
initial display state.

Change-Id: Ibf34b0b31a691324bf486d3511b797a833279ec7
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

display: fix error handling in rotation API

Previous else if statement was unreachable
because negative "ret" value situation is already handled above code.
The else if statement should handle the situation that deviced operation failed,
so it should check "reply", not "ret".

Change-Id: I65d842e7cd46afcd244b8fbdb5a1af7d03444f2d
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

input: add enum type DEVICE_INPUT_TYPE_ALL handling

To avoid get DEVICE_INPUT_TYPE_ALL from device_input_get_default_device api
because this type cannot have default input device
also, add checking DEVICE_INPUT_TYPE_ALL to input_is_supported_input_type
which was omitted

Change-Id: I6b20a76fcde9b67097a3cb5606f71fa747483550
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

input: add input device information functions

Add input functions to get device information.
Input event on/off option can be handled by device id number.
Input device id numbers can be get by below functions.
Also, input device name can be obtained by device id number.

These are function prototype to be added.
int device_input_get_devices(device_input_type_e input_type, int** input_ids, int* num_input_ids)
-> With device_input_type_e, input device id list can be obtained by this function.
input_ids will be filled with input device ids.
num_input_ids will be set with number of input device ids.

int device_input_put_devices(int** input_ids)
-> If input id list(input_ids) is no longer in use, it can be free by this function.

int device_input_get_default_device(device_input_type_e input_type, int *input_dev_id)
-> With device_input_type_e, input default device id number can be get from config file.

int device_input_get_device_name(int input_device_id, char **input_device_name)
-> With input device id number, input device name can be get by this function.

Change-Id: I0afd1340ecc6d7f0a8dd1c4083da169c77b88e3a
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

display: Add init direction in rotation angle API

init direction means the display direction of degree 0.
It is needed to know physical display state by app.

Enumeration
-device_display_init_direction_e
DEVICE_DISPLAY_INIT_DIRECTION_HORIZONTAL : Display initial direction is horizontal
DEVICE_DISPLAY_INIT_DIRECTION_VERTICAL : Display initial direction is vertical

Change-Id: Ic9092286e17d05cdd11e4c0190b301eaa8dfc263
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

display: remove ROTATION_ANGLE_DEGREE_360

display rotation degree 360 is same angle with degree 0.
So, it is not needed.

Change-Id: I5eb0873282734deb0ab957d798fceed4edf82986
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

display: add documentation in set rotation angle

Prevent to confuse the meaning of function

Change-Id: Ic40d7e830739eac643691994057d7ef240dd207b
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

display: change to use libsensor from capi-system-sensor

To prevent circular dependency in building,
change to use libsensor in display rotation API

circular dependency :
alarm-manager->capi-system-device->capi-system-sensor->
context-sensor-recorder->context-common->alarm-manager

Change-Id: Ie0827413e0f28c325eb9a56e322657a18aacef03
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

display: Add rotation angle API

rotation angle means "physical display" angle.
Clients can rotate display or check current display angle.

API function
-device_display_get_rotation_angle : get current display rotation angle
-device_display_set_rotation_angle : rotate physical display to set angle

Enumeration
-device_display_rotation_angle_e
DEVICE_DISPLAY_ROTATION_ANGLE_UNKNOWN : It can be seen in laid device
DEVICE_DISPLAY_ROTATION_ANGLE_DEGREE_0 : Initial display rotation angle
DEVICE_DISPLAY_ROTATION_ANGLE_DEGREE_90 : 90° rotation angle
DEVICE_DISPLAY_ROTATION_ANGLE_DEGREE_180 : 180° rotation angle
DEVICE_DISPLAY_ROTATION_ANGLE_DEGREE_270 : 270° rotation angle
DEVICE_DISPLAY_ROTATION_ANGLE_DEGREE_360 : 360° rotation angle

-device_display_rotation_direction_e
DEVICE_DISPLAY_ROTATION_DIRECTION_CLOCKWISE : Rotate clockwise direction
DEVICE_DISPLAY_ROTATION_DIRECTION_COUNTER_CLOCKWISE : Rotate counter clockwise direction

Change-Id: Iae840b217977e2540883fec31f5e2631aa93b967
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>
[cw00.choi: Add DEVICE_DISPLAY_ROTATION_ANGLE_DEGREE_360 enum]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

input: add getter/setter for controlling input device event

Add a getter and setter function of input device event status

These are function prototype to be added.
int device_input_set_event_state(int input_device_id, bool on);
int device_input_get_event_state(int input_device_id, bool *on);
With input_device_id parameter, it is possible to enable/disable event of input device.

This enum is a structure for managing input devices
by distinguishing input device types.
To get input_device_id number, these input types will be used.
typedef enum
{
DEVICE_INPUT_TYPE_UNKNOWN = 0, /**< Input device type which is not defined. */
DEVICE_INPUT_TYPE_ALL, /**< Input device type which is all kinds of input devices */
DEVICE_INPUT_TYPE_MOUSE, /**< Input device type which is mouse-type */
DEVICE_INPUT_TYPE_KEYBOARD, /**< Input device type which is keyboard-type */
DEVICE_INPUT_TYPE_CUSTOM_KNOB, /**< Input device type which is customed knob-type */
} device_input_type_e;

Change-Id: Idd6eec3bf0226bd8f0a156e0ac1c7be13f03aa15
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

power: add getter wakeup reason

Add function to call dbus method in deviced and get wakeup reason.
"wakeup reason" is the power transition state reason of sleep to normal.
There are several reasons why the device wakeup and sometimes it is
needed to get the reason.

Add enum to support many typical wakeup reason in device_power_transition_reason_e.

function
int device_power_get_wakeup_reason(device_power_transition_reason_e *reason)

added enum
device_power_transition_reason_e:
DEVICE_POWER_TRANSITION_REASON_VOLUME_UP_KEY         : Volume up key pressed
DEVICE_POWER_TRANSITION_REASON_VOLUME_DOWN_KEY       : Volume down key pressed
DEVICE_POWER_TRANSITION_REASON_TOUCH_SCREEN          : Touch screen pressed
DEVICE_POWER_TRANSITION_REASON_USB                   : USB attached or detached
DEVICE_POWER_TRANSITION_REASON_CHARGER               : Charger attached or detached
DEVICE_POWER_TRANSITION_REASON_HDMI                  : HDMI cable attached or detached
DEVICE_POWER_TRANSITION_REASON_DISPLAY_PORT          : Display port cable attached or detached
DEVICE_POWER_TRANSITION_REASON_EMBEDDED_DISPLAY_PORT : Embedded display port cable attached or detached
DEVICE_POWER_TRANSITION_REASON_WIFI                  : WIFI event
DEVICE_POWER_TRANSITION_REASON_BLUETOOTH             : Bluetooth event
DEVICE_POWER_TRANSITION_REASON_NFC                   : NFC event
DEVICE_POWER_TRANSITION_REASON_TELEPHONY             : Telephony event
DEVICE_POWER_TRANSITION_REASON_ZIGBEE                : Zigbee event
DEVICE_POWER_TRANSITION_REASON_ETHERNET              : Ethernet event
DEVICE_POWER_TRANSITION_REASON_AUDIO                 : Audio event
DEVICE_POWER_TRANSITION_REASON_ALARM                 : Alarm event
DEVICE_POWER_TRANSITION_REASON_SENSOR                : Sensor event
DEVICE_POWER_TRANSITION_REASON_RTC                   : RTC event
DEVICE_POWER_TRANSITION_REASON_HEADSET               : Headset attatched or detached or button pressed
DEVICE_POWER_TRANSITION_REASON_EXTERNAL_MEMORY       : External memory inserted or deleted

Change-Id: Ia22bc8df426c15ae28965e70ae8ded0caddd5b4e
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

power: change function/parameter name and callback type

The device_power_state_wait_callback has changed to provide an
additional parameter, prev_state, which denotes where a transition
has started.

Change-Id: Iab68154064dfeb64000a43e3961925a3d35524af
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: refactor power change state wait API

Hide state index enumeration into source code
 - It has been changed to be defined by enumeration
   DEVICE_POWER_STATE_*.

Introduce enumeration for transition reason
 - power_transition_reason_e

Rearrange value of enumeration device_power_state_e
 and device_power_transient_state_e
 - Previously, those enumerations share bit not to overlap each other.
   This somehow implies those enumerations are related each other. To
   clarify that they have nothing to do with each other, rearranged bit.
 - From the above change, the APIs have changed to support exclusive
   register/unregister/callback subroutine by enumeration type.
    • device_power_add_state_wait_callback()
    • device_power_add_transient_state_wait_callback()
    • device_power_remove_state_wait_callback()
    • device_power_remove_transient_wait_callback()
 - Each callback has parameter of corresponding state enumeration type.
 - Callback now receives each information directly from parameter
   instead of struct device_change_state_info. The struct
   device_change_state_info has been removed.
 - Only the device_power_wait_done() has left unchanged in that it
   can be utilized by callback of both enumeration type.

Change-Id: I991994a3bb5e648db4aefde252c5bde1feeca86d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: Add "DEVICE" or "device" prefix to enum and API

To prevent collision, it is a principle to attach a prefix of project name.
However, previous codes does not meet it.

changed enum:

power_state_e -> device_power_state_e
POWER_STATE_* -> DEVICE_POWER_STATE_*

power_transient_state_e -> device_power_transient_state_e
POWER_STATE_TRANSIENT_* -> DEVICE_POWER_STATE_TRANSIENT_*
POWER_STATE_TRANSIENT_*_EARLY -> DEVICE_POWER_STATE_TRANSIENT_*_EARLY
POWER_STATE_TRANSIENT_*_LATE -> DEVICE_POWER_STATE_TRANSIENT_*_LATE

POWER_STATE_*_INDEX -> DEVICE_POWER_STATE_*_INDEX
POWER_STATE_TRANSIENT_*_INDEX -> DEVICE_POWER_STATE_TRANSIENT_*_INDEX

changed callback:

power_change_state_wait_callback -> device_power_change_state_wait_callback

Change-Id: I386e48101e094427870ee83a5cbc2c035b331ad5
Signed-off-by: TaeminYeom <taemin.yeom@samsung.com>

power: subdivide power state

 Introduce transient state, SUSPENDING/RESUMING and they have 3 variants
each, EARLY, NORMAL and LATE. As the deviced always follows these transient
states in order, those transient state help other processes synchronize
each other by registering callbacks on each transient state.
 As the type of state has been subdivided, static ans transient, the
functions responsible for those types have also been subdivided.

For those static states, such as POWER_STATE_NORMAL,
 - device_power_add_change_state_wait_callback
 - device_power_remove_change_state_wait_callback
 - device_power_change_state_wait_done
 - device_power_change_state

For those transient states, such as POWER_STATE_TRANSIENT_RESUMING,
 - device_power_add_transient_state_wait_callback
 - device_power_remove_transient_state_wait_callback
 - device_power_change_state_wait_done

 In addition, the dbus signal name used by both capi-system-device and
the deviced has been moved to libsyscommon.
 - DEVICED_SIGNAL_POWER_CHANGE_STATE_TO_START
 - DEVICED_SIGNAL_POWER_CHANGE_STATE_TO_NORMAL
 - ...

Change-Id: I7b6d19ace2f2b73388cacc9d9344b717c0fde087
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

display: display_white_balance_e enum struct definition relocation

display_white_balance_e is enumeration for setting and getting white_balance RGB gain/offset value.
This enum struct moved from display-enum.h to display-internal.h
This is because this structure definition is for the white balancing function by Tizen_DA, not public.

Change-Id: I1f9ef05e8023f15521f3585fe36f4bc1fea578ca
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

display: add getter/setter for white balance

Add a getter and setter function of display white balance which controls RGB gain and offset.

White balancing is adjusting standard point of white color, this because the light source is different for each device.
gain value is a value to be multiplied for RGB calculation.
offset value is a value to be added for RGB calculation.

These are function prototype to be added.
int device_display_set_white_balance(int display_index, display_white_balance_e white_balance_type, int value);
int device_display_get_white_balance(int display_index, display_white_balance_e white_balance_type, int *value);

With this enum type, we can get and set RGB gain and offset value for white balancing.
It is used as a parameter of getter and setter.
typedef enum
{
DISPLAY_WHITE_BALANCE_R_GAIN = 0, /** White balance R Gain */
DISPLAY_WHITE_BALANCE_G_GAIN, /** White balance G Gain */
DISPLAY_WHITE_BALANCE_B_GAIN, /** White balance B Gain */
DISPLAY_WHITE_BALANCE_R_OFFSET, /** White balance R Offset */
DISPLAY_WHITE_BALANCE_G_OFFSET, /** White balance G Offset */
DISPLAY_WHITE_BALANCE_B_OFFSET, /** White balance B Offset */
} display_white_balance_e;

Change-Id: Ie0adc74e76bcc8e8324767448aa03e3cce585af4
Signed-off-by: Yunhee Seo <yuni.seo@samsung.com>

callback: remove feature checking

Checking feature http://tizen.org/feature/display.state had been
added without ACR and it broke ABI compatibility.
  - callback: check feature before add/remove callback (f860d7)

To recover ABI compatability, do not check the feature.

Change-Id: I3721268455ac62b52054f873808c224a8efdf832
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Revert "power: add getter for the deviced power state"

This reverts commit db2fd6133ebba7c3c2c59fabc2ed099579263355.

The getter intercepts linking to an already existing function with
the same name, which reside in the VD profile. Therefore temporarily
revert this patch.

Change-Id: Ib1c4283d4ae53e5914363c7a1062d319a991ca1b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

callback: handle change display state to VCONFKEY_PM_STATE_SLEEP

The device_display_get_state() returns DISPLAY_STATE_POWER_OFF for the
VCONFKEY_PM_STATE_SLEEP. But the display_change_cb() hasn't. To make
them be consistent, display_changed_cb() now return DISPLAY_STATE_POWER_OFF
for the VCONFKEY_PM_STATE_SLEEP. And this patch also changes intergers to
vconfkey macros.

Change-Id: I357734be07d2a418769c9017123ecb24b20ae9a7
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: rename callback function

Change-Id: I72707a9c62b9fbddeb3f03de986b34279c0a8dc9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: elaborate description

Change-Id: I485b6da54b51ba9e8e1bb79d8e56a88dfb324d02
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: add getter for the deviced power state

Change-Id: I6fd3aff0d211df954d0ec1c7505e979eef5cfd07
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Add new API to use hal-board API

Change-Id: Ia71b461ebb1b31f51ef058776e71d85581a19793
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>

power: fix memory leak

Change-Id: Iafed41769cc4a1fa4d63ead83145f032820516c4
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: move #include into a source code

A header can be used by other packages and their environment variable
for locating header files cannot locate hal/device/hal-board.h, which
makes No such file or directory error. To address this, hide the
include into source code and only exposes declaration through header.

Change-Id: I3f5c310dcf8f5fa1306fe2551d15d86caf68ba4d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: change order of signal subscription

Subscribe signal after calling AddChangeStateWait dbus method. It
prevents signal subscription when the dbus methods fail.

Change-Id: Ie194db05dbad5e784a6e4c3c211b8b45acc178b0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

callback: allow additional internal types

Change-Id: I48d987304887fc36cf071c5aaed4fcb72ea9b3f4
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: prevent poweroff if partition cloning is in progress

Change-Id: Ib280523ff8ffd248d6aea7b2ecb324dc0990ae5b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Apply requirement for gcov automation

Change-Id: Ia600223a20ebc7adb2f3e9ef5f2248114be78328
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: add device_power_change_state()

The API, device_power_change_state(), send a request to deviced for
changing power state. It simply sends request and receives result of
the request. If the changed state is sleep/poweroff/reboot, then the
ongoing async callback might be ceased. To ensure the whole execution
of subroutine, use device_power_add_change_state_wait_callback().

Change-Id: Id7479a08d56505a0bc6bfba3e9971cb635e1276e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: rename typedef of callback

 - change_state_callback -> change_state_wait_callback

Change-Id: I7a21f4e716af474e6de4236bc92718c52d767527
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power-internal: add new state POWER_STATE_EXIT

Change-Id: Idbc9ea3c9608f27651fa39dc6f252c1091a8ad06
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Modify "int len" parameter to "const int max_len"

Change-Id: Id55314a32b903bc93ebb67cd0b5f3751289a9123
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>

Add new API to use hal-board API

Change-Id: Ib1d2ebe9d489791187fb468f26815176e9ddfa34
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>

Add new API to use hal-board API

Change-Id: I219493924149aba42242b348888917c64a1b196b
Signed-off-by: SangYoun Kwak <sy.kwak@samsung.com>

usb-gadget: rename ane rearrange enum

Removed unused usb-gadget functions, DM and CONN_GADGET.

Change-Id: Ibd8c5fdc18901dd52b489e05731ed03bc3e7d8ce
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

usb-gadget: relocate declarations of enum

Move USB_FUNCTION_IDX_* from hal-api-device to deviced.
Move USB_FUNCTION_* from hal-api-device to capi-system-device.

Change-Id: Ia595e8e5c9fb73a7b108f0c1c850e9268e73ae48
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

board: replace get_reboot_mode() to get_boot_mode()

Change-Id: I600e6c036fbf2bedb79cdfaf2f46889ac835e4fe
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

display: complement description for brightness API

Change-Id: Ibd53f488e3d6333b87e39cedca55e8dca4026496
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

display: check replied return of dbus method call

Change-Id: I3a33463fa4187bb21854321849113f9b1b2edc2d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Add errno to device-error mapping for ENOTSUP

Change-Id: I43d470a61053b0ce1284ca45b4cb2251d51398ad
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Change gcov object install path

Change-Id: Ibdaf312c27db473db4d646f0276c66d1a2ff9dba
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Add extern C macro for C++

Change-Id: Ic1909914498b99e30565e34f0efe44f2de578e14
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>

board: add device_board_get_boot_reason()

Change-Id: Ifb1cbf35a444fcafdea9a5ff19b5338f6de68e02
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: initialize local GError

Change-Id: I6b6bbba478be5a923ed2dc44f063cfdce9a871a0
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: add device_power_change_state_wait_done()

The api device_power_add_change_state_wait_callback() now shall reply
to the deviced that it is ready to sleep. The struct device_event_info
now contains an additional information, uint64_t id, which is used by
device_power_change_state_wait_done(). The callback should store the id
and call device_power_change_state_wait_done() with the id.

Change-Id: I9d399cda46a0d1029439b9b66fc586aa1318fbc9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: add state POWER_STATE_START

POWER_STATE_START is the initial power state of deviced.

Change-Id: I841236237e1c765525ca3046de58d04c49d31ff8
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: apply wait callback mechanism to all state transitions

Change-Id: I09f2d72e3b0d49f775ed9087641cfe71f0ba424d
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

callback: add callback for key input signal

Key callback is exclusive for a specific target. Therefore, manages
regarding key enums using device_callback_internal_e, which ranges from
1000 to 1100.

Change-Id: I1f7b60e48407d379c6cdf1af4d18e14b1b9f7155
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: rename sleep-wait add/remove function

Change the name to
 - device_power_add_sleep_wait_callback
 - device_power_remove_sleep_wait_callback

Change-Id: I596288e27fc3bd1b977a28a7df8dc2239ffac056
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: fix sleep/wakeup dbus signal handler

Now sleep/wakeup callback is invoked by dbus signal "ChangeState".
The signal param contains type(0:sleep, 1:wakeup) as well as reason.

Change-Id: I63dbb9c1f2ee3dfb6557d5ce1e5f1d322d976292
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: change return value of cpulock/unlock

C# TCT expects DEVICE_ERROR_NONE for not supported feature.

Change-Id: I8e1d2f5f34e297e13a4fd05b1cf60c182d537771
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
(cherry picked from commit 21e09d4797a02b17408b59cb2c1c59a95b35efd3)

power: disable CPU lock/unlock on iot-headless

Change-Id: Idd2cf460012f7bfab2ef8c9c649a54d1d1b50471
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: add signal handler for wakeup signal

Change-Id: If8c314fe656edced7042c827b81455a41af2cbf3
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: add internal function for deferring sleep

Someone who wants to defer sleep can now request for deferring sleep to
system using device_power_add_sleep_callback(). The callback is invoked
when the system is going to sleep. Do your todo list for sleep in this
callback, and return DEVICE_SLEEP_READY, which notifies the system you
are ready to sleep.

Change-Id: I5dfbe60abbfaa30991124cfd5eea243f85a80d02
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

power: support cpu lock/unlock for headless

Change-Id: Ic1ecf15ee3a6f5b5de17f438b094a847ae4e875b
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Fix description on device_battery_property_e

Change-Id: Iae6f04133632967e7412b9cbc6fa12f6730d2b76
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>

temperature: adopt direct hal api

Change-Id: I8e6d654a57895a327930f9dd966c830c76e7de9e
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Fix warning of converting pointer from integer

warning: cast to pointer from integer of different size
The above warning is only generated in 64bit compile environment.

Change-Id: Idffb00ec61ac9029f94ceca14c13882b7ac33fdf
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Add description on device_battery_property_e

Change-Id: I4769e5c5db34fa4aed81720db7e1262884880f12
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>

callback: check feature before add/remove callback

Change-Id: Id9ab9c9d68a54bcba444606ba7c62f46cc2c6d4c
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Add board-internal to get serial number

Change-Id: I97e25f8fabc30fd5b4e26ec371b16430c57107d9
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Fix typo

Change-Id: Ib8bdedf432e863081dc92a86fba33b3ae3153606
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Change dbus function name

Change-Id: Ifc85b487582dc18914ebb76a9d64ea09a30be16d
Signed-off-by: taemin.yeom <taemin.yeom@samsung.com>

Improve variable naming style

Change-Id: I04a989d5ebd9b50ede2352df195707dd84c8d3b2
Signed-off-by: taemin.yeom <taemin.yeom@samsung.com>

Apply libsyscommon gdbus api improvement on error handling

Change-Id: Ie150902e176ec89362920ce6903a9280056a8c5f
Signed-off-by: taemin.yeom <taemin.yeom@samsung.com>

Add display feature for headless profile

Return DEVICE_ERROR_NOT_SUPPORTED about below API
ex) device_power_request_lock
    device_power_release_lock

Change-Id: I119e3a8839c8986af81257202545abc14e2438ec
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Change function name and location

ex)
1. function name
   is_display_state_supported -> is_feature_display_state_supported
   is_display_supported -> is_feature_display_supported
2. location
   common.c -> display.c

Change-Id: I0fc050b244858e4d3b3ffcc02b6455af51cdecfa
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Add comments for line coverage

Change-Id: If5658a2478d341631749b5338d58e83701d8932d
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

battery: fix usage of hal api

Change-Id: I7492e3fc58ffe150450ff8ad70a0bd2b09783df4
Signed-off-by: Yunmi Ha <yunmi.ha@samsung.com>

Use device_battery_get_info_direct

Change-Id: I387f39d1ba792e9c79aae75abc12cf498652bd34
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Apply next HAL architecture (device_battery_get_info_direct)

Change-Id: I8501f3f3ffbcce78f76a0fd4b99d3901a30c5bee
Signed-off-by: Yunmi Ha <yunmi.ha@samsung.com>

Change return value for -ENOTSUP, -ENODEV and -ENOENT

DEVICE_ERROR_NOT_SUPPORTED must be returned only when feature is not defined.
So, change return value to DEVICE_ERROR_OPERATION_FAILED.

Change-Id: Id4876d34e63c55d666458f58fef95c24eb77026f
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Change prefix of list definition

- list to SYS_G_LIST

Change-Id: I293acdeb5f475e477d088573e61fb2f538f568c3
Signed-off-by: Yunmi Ha <yunmi.ha@samsung.com>

Use libsyscommon for list and ini-parser

Change-Id: I1d0f41b21ecac551962dca3bec702a4d9cf59441
Signed-off-by: Yunmi Ha <yunmi.ha@samsung.com>

Add internal api for power off

Change-Id: I85be084f3b566c68ea44593a757bd664a08bbc3b
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Remove unnecessary HTML link for privilege

Change-Id: I9177889ff54d84ea49889a85eaa35f4dbe6186cb
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Change system error to device error code

Change-Id: I4a33afe41699a1aeb76821bcf234ab2e56f8676d
Signed-off-by: Yunmi Ha <yunmi.ha@samsung.com>
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Use libsyscommon

To eliminate dbus proxy in device api, use libsyscommon instead.

Change-Id: I43c2c2c14278d20dc97b106842d3b536c0eb840a
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Change comments

Change-Id: I5a45a46a27203ffdf0d020f878773590af3257a0
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>
(cherry picked from commit bb139aa4fe99c5ba112d9c9a89894b28c941b799)

Add remarks for DISPLAY_STATE_SCREEN_DIM and POWER_LOCK_DISPLAY_DIM

Change-Id: I488a385f50ecc495dcbfba138e6641bddb3ae63a
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>
(cherry picked from commit 4c9e1fdc3826b235465b9ff1a2ee8a7244689ce3)

Apply check_async_call_rate to each function

Currently, check_async_call_rate is applied to power and display.
If power related api is blocked, display related api is blocked as well.
So, devide them.

Change-Id: I7132448f2aaf29fe26fcd1c4f3e7f7d421732fd6
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Fix to use g_free() instead of free()

Memory allocated by g_malloc(and such as g_new()) should be matched with
g_free().

Change-Id: Iafc9f5c29ed9d120d312df681f6125e80bc5fbb6
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Fix check_async_call_rate()

This is to prevent a broken pair of lock/release by check_async_call_rate()
Do not invoke device_power_release_lock(type) unless the type is locked.

Change-Id: I4cb8517fd5abce72ba0b9c405434706f64db10b9
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>

Apply G_DBUS_PROXY_FLAGS_DO_NOT_CONNECT_SIGNALS for dbus proxy

This is for preventing implicit dbus signal subscription with NULL member
that causes too many signal messages.

Change-Id: Iaf0b78da45e8e6fdecea162fe44c529dc99a5ed7
Signed-off-by: Hyotaek Shim <hyotaek.shim@samsung.com>

Add extern C to booting-internal.h

Change-Id: I2d5bbb836caae6a2bfc35a9a888bf0a1f5155dbc
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>

Add comments for line coverage

Change-Id: Ie2eddae2cf4dd0b29680756528777f6e061e9ec5
Signed-off-by: lokilee73 <changjoo.lee@samsung.com>

Typedef change: dbus_pending_cb -> device_dbus_pending_cb

Change-Id: I1308144009a355d9c4580391ed6c1ac126255bce
Signed-off-by: Youngjae Cho <y0.cho@samsung.com>