taeyoung [Thu, 13 Oct 2016 09:47:26 +0000 (18:47 +0900)]
power: add privilege check routine for reboot operation
The reboot operation is permitted to privileged apps only.
Change-Id: I58e161cbb7b6b1bb54fc6e7dffd5f62eefa12fec
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 13 Oct 2016 09:33:20 +0000 (18:33 +0900)]
power: fix shutdown animation error issue
- Launching manner of the shutdown animation is changed
to use systemd service. Thus the codes are fixed.
- For the sound-server, the function to tuen off sound related
operations is removed from Tizen 3.0. Thus it is removed.
Change-Id: I1950a3e4a796bf5606170b001d01d2876b528fed
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 13 Oct 2016 09:15:07 +0000 (18:15 +0900)]
power: change power off functions to "static"
The power off functions are not used other places.
Thus they are changed to static functions.
Change-Id: I0ea219217ebce7af46e1b1557bb1841cc372b6b3
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 13 Oct 2016 05:16:19 +0000 (14:16 +0900)]
battery: reduce logs for periodical battery reports
There are so many logs for periodical battery reports.
They can reduce the readability for logs. Thus the logs
are reduced.
ex)
battery_state(709) > Full(Discharging) usb(4) Capa(100) Hth(Good,Low), Pres(1), OVP(X), Curr(88,88)
Change-Id: I792f4486ce34f17ba8e1db9640b47c6f1316f68e
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Tue, 18 Oct 2016 11:40:04 +0000 (20:40 +0900)]
display: skip state change operation if next state is same as current state
- Previously, display state was set again even if next state
is same as current state. Thus display was turned on for a while
during turning off the display since pm_cur_state was updated
after turning off the display and checking if the state is transitable.
- Now, display transition is ignored if next state is same as
current state. Thus the state is not transitable in the case.
Change-Id: I605916c5e2235e46b0b8b04375b4427b32584665
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Giyeol Ok [Fri, 14 Oct 2016 04:36:34 +0000 (13:36 +0900)]
spec: change deviced main version
deviced main version is not changed until now
so raise up it to 2.x.x
Signed-off-by: Giyeol Ok <giyeol.ok@samsung.com>
Change-Id: I03d35d26f3fe7f1b492c5ff39bf2dd5c9ecb852b
taeyoung [Wed, 12 Oct 2016 09:39:26 +0000 (18:39 +0900)]
usb: fix implicit function declaration issue
Change-Id: Ia338258a940ea3c4ff57142865cbc5317cff4284
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 7 Oct 2016 11:22:51 +0000 (20:22 +0900)]
display: ignore touch event occurred during turnig off the display
- Previously, touchscreen was disabled after turning off the display.
Thus the touch events occurred at the moment between turning off
the display and disabling the touchscreen tried to turn on the
display again. The events were queued for the main loop, and thus
they could not be avoided.
- Now, a flag touch_event_blocked is set before turning off the display.
Thus the touch events can be ignored according to the value of the flag.
Change-Id: Ic49fba662376e4e122a5785854f1adc82ffe4ec0
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Fri, 7 Oct 2016 06:42:19 +0000 (15:42 +0900)]
Fix minor issues
- Check unit_len
- Check whether size has negative value
- Fix for sscanf beffer overflow
Change-Id: I5ba7215e3c6f3ae3544a57fefc4693c4cc768249
Signed-off-by: pr.jung <pr.jung@samsung.com>
pr.jung [Fri, 7 Oct 2016 02:24:44 +0000 (11:24 +0900)]
Fix get_mmc_primary_id to get id not flags
Change-Id: I92a80184938ad62cf84c0f3ae3a0f7d6b54c2ca6
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Wed, 5 Oct 2016 09:57:46 +0000 (18:57 +0900)]
usb: disable usb mode according to the current mode
- Previously, usb mode is disabled according to the selected mode.
Selected mode means that User selected the mode as the next mode.
However Selected mode can be different with current mode since
usb mode setting can be failed or there is no mode if usb cable
is not connected. Thus usb mode should be disabled according to
the current mode.
Change-Id: If3b825910aa1360cf92ccab68442f4931b5f2ec6
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Tue, 4 Oct 2016 06:54:33 +0000 (15:54 +0900)]
tzip: add NULL check routine
tzplatform_getenv() can return NULL. If the result is NULL,
Crash will be occurred. Thus NULL check routine is required.
Change-Id: I5a3c4aa90d3d7e387c4295371d25379897175277
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 30 Sep 2016 04:57:33 +0000 (13:57 +0900)]
tzip: fix string compare bug
- tzip checks if the mountpath is on TZ_SYS_HOME or TZ_SYS_RW_APP.
Thus the length of the comparation needs to be from TZ_SYS_HOME
or TZ_SYS_RW_APP, not the mountpath.
Change-Id: I8ace95651d6101ad1cf7ab85526ee03a4ebb966b
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 29 Sep 2016 08:19:43 +0000 (17:19 +0900)]
tzip: fix privilege issue
- Just apps who have "System" smack label are permitted
to use TZIP
- Just TZ_SYS_HOME and TZ_SYS_RW_APP are permitted
to mount TZIP
Change-Id: I4531577b423a478243038c86571fcc0b4d4c7331
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Kunhoon Baik [Mon, 26 Sep 2016 07:37:12 +0000 (16:37 +0900)]
Fix fd leak
The fd will be allocated for the target process by kernel.
Thus, already-passed(allocated by kernel) fd should be freed in daemon.
Change-Id: I45258b147d921ae96b407f86bf0b4c54f4672537
pr.jung [Mon, 26 Sep 2016 09:51:55 +0000 (18:51 +0900)]
Remove NOTICE file
Change-Id: Id2c592640399d8e146b316ecdf69448bd0c5d70a
Signed-off-by: pr.jung <pr.jung@samsung.com>
Karol Lewandowski [Thu, 22 Sep 2016 14:50:22 +0000 (07:50 -0700)]
Merge "Use USB gadget and USB config HAL instead of direct manipulation" into tizen
taeyoung [Wed, 21 Sep 2016 03:42:58 +0000 (12:42 +0900)]
common: fix minor issues
- memory leak
- uninitialized variable
- memory release sequence
Change-Id: I9a4271bf4a83029e5ce4dd9f38be1cdb2fa7682f
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Wed, 21 Sep 2016 04:38:31 +0000 (13:38 +0900)]
Remove unreachable code
Change-Id: Ia36aa01b963d449de57bc8b590367fd2a8eb1952
Signed-off-by: pr.jung <pr.jung@samsung.com>
pr.jung [Wed, 21 Sep 2016 02:20:31 +0000 (11:20 +0900)]
Fix sscanf issue
Change-Id: I193ad313c1e710d753c05a761af45e2297992d61
Signed-off-by: pr.jung <pr.jung@samsung.com>
pr.jung [Tue, 13 Sep 2016 09:13:42 +0000 (18:13 +0900)]
Not mount internal mmc device
Change-Id: I345998e526e6b57e0d784592fa6c605906e810d1
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Tue, 20 Sep 2016 02:01:16 +0000 (11:01 +0900)]
usbhost: enable usb-host test module only for Mobile profile
usb-host api is enabled only for Mobile profile. Thus
the test module for the usb-host api needs to be enalbed
only for Mobile profile too.
Change-Id: I09d9877c6ebd734f9c2b29bbe491c0ddc3e0e67d
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Paweł Szewczyk [Mon, 19 Sep 2016 12:36:05 +0000 (14:36 +0200)]
usb-host-test: Fix stopping testing service on legacy mode
Cleaning usbg context on legacy mode caused deviced crash on
stopping test mode. This commit fixes that.
Change-Id: I3d8c16fdda37090cdbda6dfb95ba72cd3f815733
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
Karol Lewandowski [Fri, 16 Sep 2016 15:52:12 +0000 (17:52 +0200)]
usbhost: Use system-popup
Fixed usb popup object path to match system-popup
Change-Id: Ib4fbf7e5bf5e0b39bcd83cb6ea68848581fc7bc0
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>
Karol Lewandowski [Tue, 13 Sep 2016 10:09:55 +0000 (12:09 +0200)]
usbhost: udev: Allow direct access for virtual USB device
Virtual USB device (dummy-hcd) is used for non-interactive testing only
(iTCT). Without appropriate permission GUI popup will be shown requesting
user for access confirmation.
This commit makes dummy-hcd accessible to everyone - so that tests
can execute non-interactively.
Change-Id: I0054a27efec1d606286d1b36034318bca6f6b980
Krzysztof Opasiak [Tue, 13 Sep 2016 08:13:02 +0000 (10:13 +0200)]
Use tizen specific g_ffs module params to enforce device identity
usb host tests expect a defined value in both configuration
string and bmAttributes. Let's use tizen specific g_ffs module
params to enforce those values.
Change-Id: I466e86230fe119477bf2c5148bf73dd3e5c96321
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Krzysztof Opasiak [Mon, 12 Sep 2016 19:26:25 +0000 (21:26 +0200)]
Use module options to enforce expected device attributes
g_ffs provides a set of standard module parameters which
allows to set device indentity. As usb host tests expects
a predefined identity of test device let's use those module
params to set it.
Change-Id: I32782d61f756e6cd4fb13cbcccc2b5ef3bd0a91e
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Paweł Szewczyk [Tue, 6 Sep 2016 14:29:36 +0000 (16:29 +0200)]
Add usb test setup also for 3.10 kernel
Change-Id: I02eab869e55837851c463c1eaa35ec749cb5223e
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
Paweł Szewczyk [Wed, 27 Jul 2016 09:29:20 +0000 (11:29 +0200)]
Add usb-host testing environment setup
Change-Id: Icc0ce7f323a8307f2f80a17b0f6f66165018e7a1
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
Kichan Kwon [Tue, 6 Sep 2016 04:43:57 +0000 (13:43 +0900)]
systemd: check mounting before sending booting-done signal
- In current, lazy mount is applied at the mobile profile
- To check whether /opt/usr is mounted, we use specific file made by lazy_mount
Change-Id: Icf9e575607886e824e37deadf44d53bf944968c2
Signed-off-by: Kichan Kwon <k_c.kwon@samsung.com>
pr.jung [Wed, 7 Sep 2016 06:20:06 +0000 (15:20 +0900)]
Change uid and gid for deviced-vibrator
Change-Id: I9b1cd9e1d51a9513c333e47e98c25305720f7fb7
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Mon, 5 Sep 2016 10:42:39 +0000 (19:42 +0900)]
macro: add prefix "TIZEN_FEATURE_" to the local build macros
Change-Id: Iea4529dab2f34d113957632c06da17c3a36cff1f
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Wed, 20 Jul 2016 10:40:39 +0000 (19:40 +0900)]
block: Add information for DeviceBlocked signal
Change-Id: I7f01acddd0c29ee577feba92b0c7d570f85baf09
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Wed, 31 Aug 2016 23:54:56 +0000 (16:54 -0700)]
Merge "systemd: remove deviced-pre.service" into tizen
Paweł Szewczyk [Fri, 26 Feb 2016 14:46:53 +0000 (15:46 +0100)]
usbhost: Introduce temporary policy
Temporary access is limited to single device connection. When device is
disconnected, temporary policy entries related to it are removed. These
entries are never saved.
Change-Id: I158126450dd06ca483f4ee2b5788e8caffcb3f86
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
taeyoung [Tue, 30 Aug 2016 02:05:40 +0000 (11:05 +0900)]
systemd: remove deviced-pre.service
- device-pre.service is not used anymore.
Thus it needs to be removed
Change-Id: I566ca70d8074357482a27de495c83363be1b6606
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Krzysztof Opasiak [Sat, 13 Aug 2016 15:55:31 +0000 (17:55 +0200)]
Use USB gadget and USB config HAL instead of direct manipulation
Thanks to new HALs provided for each Tizen device most of USB
specific code can be droped from deviced. Instead of it, deviced
now uses both HALs to get and apply USB configuration to USB
gadget subsystem.
Strongly based on initial work by:
Taeyoung Kim <ty317.kim@samsung.com>
Change-Id: I396c29a2e6d81feda6dbbc24f9d03022afb00697
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
taeyoung [Mon, 22 Aug 2016 00:21:48 +0000 (17:21 -0700)]
Merge "systemd: add user and group information of the systemd service files" into tizen
taeyoung [Tue, 9 Aug 2016 08:10:38 +0000 (17:10 +0900)]
systemd: add user and group information of the systemd service files
- deviced-pre.service: User and group are system_fw
since the file is used just for the deviced.
- zbooting-done.service: user and group are system_share
since the signal is used at several other modules.
- sdb-prestart.service: user and group are root
since it needs to change the information of sysfs.
The service file is changed not to be installed
with normal images because the file is just used
for debugging purposes.
Change-Id: I1abf3cdc455b6fff5108e62377370d1df7419cc8
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Kunhoon Baik [Sat, 13 Aug 2016 01:04:25 +0000 (10:04 +0900)]
Refactoring Standard Vibrate Engine
Circle and Forced Feedback Standard Engine use standard Core Engine.
Thus, Standard Core Engine was seperated.
Change-Id: I058f98b94a3a6c9ff9b4e2b9e2e95b99d91dbe71
pr.jung [Wed, 6 Jul 2016 10:22:21 +0000 (19:22 +0900)]
haptic: Seperate haptic operation for wearable-circle from haptic.c
Change-Id: I3c81b10bbe1909abe1bcb74e8ad6ee8c78401177
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Wed, 10 Aug 2016 07:15:07 +0000 (16:15 +0900)]
usb: add dbus methods and signals of Tizen 2.4
- dbus methods and signals supported in Tizen 2.4 is added.
Change-Id: Iea351d8038a8043d751cd10166b407d181c7678e
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 11 Aug 2016 23:51:53 +0000 (08:51 +0900)]
common: apply Tizen coding rules
- Space is required before ":" and "("
Change-Id: I8bf8b8b3d747a54cf69818db24ec0d244eefa68e
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 11 Aug 2016 07:10:44 +0000 (16:10 +0900)]
power: unmount cgroup after closing other apps
- Previously, cgroup is unmounted when poweroff popup is launched.
This is a critical bug and it should be fixed.
- Now, cgroup is unmounted just before turning off power.
Change-Id: Iafe16348a77aee6875e47e19b87cf755b85e8200
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 11 Aug 2016 06:57:04 +0000 (15:57 +0900)]
common: change fuser path
- The path of the fuser path is changed
from /sbin/fuser to /usr/bin/fuser by
upgrading psmisc package.
Change-Id: Iea29bdad6a8438fe5802618adf0fd8a74d1bd11d
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Thu, 11 Aug 2016 05:14:05 +0000 (14:14 +0900)]
block: Remove build warning
Change-Id: Ieb9b550178d92089e74d21486bfe5487bb63e908
Signed-off-by: pr.jung <pr.jung@samsung.com>
pr.jung [Wed, 10 Aug 2016 07:00:57 +0000 (00:00 -0700)]
Merge "block: Modify block module" into tizen
taeyoung [Fri, 5 Aug 2016 07:34:49 +0000 (16:34 +0900)]
devicectl: fix invalid parameter type
Change-Id: I8979e3e6a55896ffb319e708ee26841e2733dcd3
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Thu, 21 Jul 2016 07:52:50 +0000 (16:52 +0900)]
block: Modify block module
1. Merge Block interface to BlockManager
- Before, deviced creates new object for every device node,
sends signal and receives dbus methods requests using Block interface.
It cause some timing issues.
- Now, block module will not creates new object for each node,
and only have BlockManager interface.
2. Check queue has unmount operation before mount
- If operation queue has unmount operation, then deviced doesn't need to mount device.
So, deviced dequeue operations before unmount operation.
3. Check operation is already done
- If operation is already done, deviced doesn't need to do it again.
4. Use specific number of thread
- Maximum number of thread is 5.
- If new block_device which use same devnode is inserted,
same thread which used before dealt with the new block_device.
- Each thread processes operation in the order of block_device is added to block_dev_list.
- After operation queue is empty from one block_device, thread processes operation for next block_device.
5. Add thread mutex and thread wait condition
- Add thread mutex for operation queue and op_len
- Remove block_device mutex (which was for operation queue)
- Wait when all operation queue of thread is empty (op_len == 0)
- Wakeup when first operation is added (op_len is changed to 1)
6. Make block_dev_list for each thread
- Use thread mutex for each block_dev_list of thread
- Dbus method calls should not get information about physically removed block device
7. Same device is dealt with the same thread
- All partitions from same device is dealt with the same thread
8. Remove BLOCK_DEV_DEQUEUE pipe command
Change-Id: Ia4064de11afafdcbeb9811cf4884978f22f27b25
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Wed, 3 Aug 2016 06:52:24 +0000 (15:52 +0900)]
devicectl: add power off/reboot comand
- Power off command
$ devicectl power off
- Reboot command
$ devicectl power reboot
Change-Id: I32abdd6c7cbb01ecd7b111ee5e8b25e6b3d33a2b
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Wed, 3 Aug 2016 05:26:49 +0000 (22:26 -0700)]
Merge "libdeviced: remove unused apis" into tizen
Paweł Szewczyk [Wed, 10 Feb 2016 12:32:13 +0000 (13:32 +0100)]
usbhost: Add API for handling device attach/detach
Change-Id: Ie333f7b403721f7b0611c57d172a930d1b1fc456
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
taeyoung [Wed, 3 Aug 2016 05:15:14 +0000 (22:15 -0700)]
Merge "display: change get/set brightness operation to use max brightness" into tizen
taeyoung [Wed, 27 Jul 2016 08:24:48 +0000 (17:24 +0900)]
libdeviced: remove unused apis
Change-Id: I4c3e34e0bc2d530c52c68fa2ce37518b09eff3af
Signed-off-by: taeyoung <ty317.kim@samsung.com>
José Bollo [Mon, 22 Jun 2015 13:32:42 +0000 (15:32 +0200)]
Removes hidden dependency
The depedency to the project platform/adaptation/system-plugin
that provides tizen-system-env.service is missing.
This removes the hidden dependency. This is a hack.
Please either explicit the dependency in spec file or keep that removal.
Change-Id: Id480a018a036ecbc3a76b15d2424e94c23cc4546
Signed-off-by: José Bollo <jose.bollo@open.eurogiciel.org>
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Mon, 25 Jul 2016 08:27:10 +0000 (17:27 +0900)]
block: remove unused variables
Change-Id: Icbe575f938a7ddcc2c84e34a2c7325c398d2655d
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Slava Barinov [Fri, 20 May 2016 07:52:40 +0000 (10:52 +0300)]
display: build fix for -fno-common
Fix linkage issues for build for '-fno-common' option which is used with
Address Sanitizer tool
Change-Id: Ie6d31a7782da61d326ce52b43622d73ff7e2128a
Signed-off-by: Slava Barinov <v.barinov@samsung.com>
Paweł Szewczyk [Tue, 2 Feb 2016 17:53:54 +0000 (18:53 +0100)]
usbhost: Store policy in file
Policy is stored in one file at deviced shutdown and read from it at
startup
Change-Id: I8a5ef1da3c44d7b4757ac4e16a07f86863e09c3a
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
Paweł Szewczyk [Tue, 2 Feb 2016 16:20:31 +0000 (17:20 +0100)]
usbhost: Add access list
All policy entries are stored on list. For now we assume 'allow always'
for every request which was not found on access list.
Change-Id: I6b294e14e0a2c06bc9c79a063f2cd181436447b3
Signed-off-by: Paweł Szewczyk <p.szewczyk@samsung.com>
Taeyoung Kim [Mon, 25 Jul 2016 00:58:13 +0000 (17:58 -0700)]
Merge "usb-host: Add introspection of requested device and caller" into tizen
Karol Lewandowski [Thu, 21 Jul 2016 16:18:16 +0000 (09:18 -0700)]
Merge "usbhost: Add API for opening device" into tizen
taeyoung [Thu, 21 Jul 2016 08:22:26 +0000 (17:22 +0900)]
telephony: remove telephony module
- Telephony module is not used currently.
Thus it is removed
Change-Id: I066f096e746b464a38983d64dcfb5fb26adce6a8
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 21 Jul 2016 02:45:25 +0000 (11:45 +0900)]
restart: remove restart module
- restart module is not used. Thus it is removed
Change-Id: I0366d36cc57f4ec0416000550078274d73ad77e5
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Yunjin Lee [Wed, 20 Jul 2016 11:12:32 +0000 (20:12 +0900)]
Set SmackProcessLabel in service files
Change-Id: I6ce9ea92b78701727fe4f5997bb406bd9e1ac013
Signed-off-by: Yunjin Lee <yunjin-.lee@samsung.com>
taeyoung [Wed, 20 Jul 2016 02:27:08 +0000 (11:27 +0900)]
power: send poweroff notifications before the poweroff operations
- Power off operations contain unloading devices and
disabling journald and cgroup. Thus poweroff notifications
need to be delivered to the user space before the poweroff
operations.
Change-Id: I7b4ed05c571fc6bfe2110527a3281ce5f3910a2c
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 15 Jul 2016 10:37:30 +0000 (19:37 +0900)]
display: add .wm_ready check routine
- Display cannot be turned on during booting time
if display manager is launched later than deviced.
In this case, the request to turn on the dpms is
failed.
- The existance of the file /run/.wm_ready shows
that the display manager works properly. Thus
deviced checks the file existance during booting.
Change-Id: Iece683fca040d855c122381576c7835462a1adf9
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Thu, 14 Jul 2016 11:56:31 +0000 (20:56 +0900)]
block: add the method which returns the primary mmc information
- Primary mmc information is used to install apps on the mmc.
Thus primary mmc information method is necessary to avoid
iterations with previous methods
Change-Id: I0d6ef92533788bf6696274436ba8e28b4624e25f
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Thu, 14 Jul 2016 05:39:18 +0000 (22:39 -0700)]
Merge "haptic: Modify higher bound for haptic level" into tizen
pr.jung [Thu, 14 Jul 2016 05:26:47 +0000 (14:26 +0900)]
haptic: Modify higher bound for haptic level
Change-Id: Ic814a2ae52c304dd6533ba7fca909e8d55fcc673
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Fri, 8 Jul 2016 12:50:33 +0000 (21:50 +0900)]
usb: use strlen() to get the length of the string
- If sizeof() is used for the char*, it always returns 4.
Thus strlen() needs to be used to get the length of strings
Change-Id: Ib388b55b5bb8571035f7245cad2cc826c840f945
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Thu, 7 Jul 2016 01:53:17 +0000 (10:53 +0900)]
haptic: Check higher bound for calloc
Change-Id: Ia49f78d3bfa47cf4baeb346db14a3e7b52f67dde
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Thu, 7 Jul 2016 01:08:36 +0000 (10:08 +0900)]
display: change get/set brightness operation to use max brightness
- There are various drivers whose maximum brightness values are different.
Thus get/set brightness operation calculates the real brightness
according to the maximum brightness value.
Change-Id: I4dd277cde6b0e0515cd95b7bc40137b018dce030
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Wed, 6 Jul 2016 07:49:07 +0000 (16:49 +0900)]
usb: show notification when mtp is enabled
- when usb cable is connected and mtp is enabled,
users need to know that they can transfer files
with host PC. Thus notification is required.
Change-Id: Id7d3174f9d5d0bb635d36b56698263e7f7744694
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Wed, 6 Jul 2016 06:40:15 +0000 (15:40 +0900)]
deviced-vibrator: Remove smack capability
Change-Id: Ia1ed2ec75d91e563d52ca670da390465853f2fee
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Tue, 5 Jul 2016 04:47:32 +0000 (13:47 +0900)]
block: disable apps on mmc when unmounting mmc
- Apps can be installed on external mmc. Thus
the apps need to be disabled when unmounting
mmc.
Change-Id: Iba748f8ed8333849e313dfa95eac83777fa3ef42
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Tue, 5 Jul 2016 09:01:11 +0000 (02:01 -0700)]
Merge "[haptic]Add deviced-vibrator permission rules" into tizen
taeyoung [Tue, 28 Jun 2016 07:20:35 +0000 (16:20 +0900)]
display: broadcast display status via eventsystem
- Eventsystem is official tool to broadcast system event.
Thus it is also used for the display status.
Change-Id: Ib19507e9b7bdc74a7ae51d4e551b4ba086b08bc1
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Tue, 5 Jul 2016 08:58:17 +0000 (01:58 -0700)]
Merge "usb: broadcast usb status via eventsystem" into tizen
pr.jung [Tue, 5 Jul 2016 08:08:48 +0000 (17:08 +0900)]
[haptic]Add deviced-vibrator permission rules
- Add deviced-vibrator permission rules
- Add vibrate_effect and is_supported for emulator
- Fix bus name used by libdeviced
Change-Id: I9ddef1c7aabfb876887bb1a3d5f5c9560947dafe
Signed-off-by: pr.jung <pr.jung@samsung.com>
Taeyoung Kim [Fri, 1 Jul 2016 00:59:48 +0000 (17:59 -0700)]
Merge "Add and remove error checking code" into tizen
taeyoung [Thu, 30 Jun 2016 10:10:56 +0000 (19:10 +0900)]
common: set PATH env
- PATH env need to be added since system PATH env
can have weird paths.
Change-Id: Ibc45f18b2a607724d60b9a1c2fe7ba4ef8340c49
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Tue, 28 Jun 2016 06:34:53 +0000 (15:34 +0900)]
[haptic]Remove build fails
Change-Id: I7cbf7d8e9b45acb8fde9b39bcea30f10cfb4792e
Signed-off-by: pr.jung <pr.jung@samsung.com>
Kichan Kwon [Wed, 29 Jun 2016 09:19:09 +0000 (18:19 +0900)]
Add and remove error checking code
- haptic : check whether value is positive number
- block : remove needless checking
Change-Id: I4e85afc973afd861833c45b4d070291ce65c69f7
Signed-off-by: Kichan Kwon <k_c.kwon@samsung.com>
taeyoung [Tue, 28 Jun 2016 07:11:30 +0000 (16:11 +0900)]
usb: broadcast usb status via eventsystem
- Eventsystem is official tool to broadcast system event.
Thus it is also used for the usb status.
Change-Id: I0a07268edcc463cf12e037af589b4e266d8e1fd2
Signed-off-by: taeyoung <ty317.kim@samsung.com>
pr.jung [Mon, 30 May 2016 11:17:37 +0000 (20:17 +0900)]
[haptic]Add another logic for haptic
In this logic, haptic has 3 configuration files,
vibration.conf, vibration_duration.conf, vibration_waiting.conf
one is for duration and waiting pattern mapping table
and the others are for duration and waiting pattern definition.
(Ex. PATTERN1 = D1,W1
D1 = 100,200
W1 = 100,200,300)
vibrate_effect vibrate with the combination of duration and waiting pattern.
Change-Id: I3d6aafe7c32ddb301393a63e9f88c5fc1f1a02c2
Signed-off-by: pr.jung <pr.jung@samsung.com>
pr.jung [Mon, 30 May 2016 10:51:22 +0000 (19:51 +0900)]
[haptic]Improve feedback operation
Parse vibration configuration file in deviced-vibrator instead of libfeedback,
so it is parsed only once.
Vibration configuration file has duration for playing and waiting time.
Also, VibrateEffect and IsSupported are added.
IsSupported is used for checking whether specific pattern is supported on haptic device.
VibrateEffect gets pattern string and plays haptic.
deviced-vibrator gets duration pattern from parsed configuration and plays.
VibrateEffect is used instead of VibrateBuffer and VibrateMonotone.
Change-Id: Ib624a94ce507f7799a4fe8ac2a4bf4d0ad189ce2
Signed-off-by: pr.jung <pr.jung@samsung.com>
pr.jung [Mon, 30 May 2016 09:53:06 +0000 (18:53 +0900)]
[haptic] Seperate haptic operation to deviced-vibrator daemon from deviced
Add deviced-vibrator daemon
Change-Id: I38f53e6c2ecdf202d5da8f3ddb604c1833528842
Signed-off-by: pr.jung <pr.jung@samsung.com>
taeyoung [Sat, 18 Jun 2016 08:32:56 +0000 (17:32 +0900)]
usb: handle usb connection on emulator
- On emulator, There is no usb configuration concept.
Thus usb connection operataion was failed during
setting configuration.
- Now, usb configuration is skipped on emulator.
Thus other states are updated, and indicator shows
the usb icon.
Change-Id: If3756cde29ac25f09ef2aa82636dac1b471e9356
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 17 Jun 2016 12:32:49 +0000 (21:32 +0900)]
block: fix warnings
- The types of paths are changed to "const char*"
Change-Id: If0f4ba5483521aedee847b14d1e5f12926b7f4c5
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 17 Jun 2016 11:46:24 +0000 (20:46 +0900)]
block: support internal apis for mount/unmount/format
- Internal apis for mount/unmount/format need to be
supported for the backward compatibility. They are
used in Setting app currently
- The apis use libstorage to get storage information
and dbus methods to request operations to deviced.
Change-Id: Id96b33f39c11778dffb1867db482caf8b749ce35
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 17 Jun 2016 11:42:06 +0000 (20:42 +0900)]
block: set vconf key related with mmc
- Setting app uses VCONFKEY_SYSMAN_MMC_MOUNT.
Thus the vconf key value is set for the
backward compatibility.
Change-Id: I873bb7577e197ac52a90748339cff46c7e0a41cd
Signed-off-by: taeyoung <ty317.kim@samsung.com>
taeyoung [Fri, 17 Jun 2016 11:18:57 +0000 (20:18 +0900)]
block: change dbus connection to block connection
- When returning the results of the mount/unmount/format
operations, dbus connection of the deviced was used.
Thus the return value cannot be delivered to apps.
- Now the dbus connection is changed to the block connection.
Thus the return value can be delivered to apps properly.
Change-Id: I90527a09da59558a5256c889b64e2e343b2629c0
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Kunhoon Baik [Fri, 17 Jun 2016 14:42:56 +0000 (23:42 +0900)]
Temporary Patch for preventing early suspend.
This patch should be removed by generic and better solution.
This patch should be tested at other devices.
Change-Id: I4b3741ade8943f2c5b8de369877bcd367145bbea
Kunhoon Baik [Fri, 17 Jun 2016 12:35:32 +0000 (21:35 +0900)]
Providing backward compatibility for APPs in the store
Some apps assumes that primary external storage id is "1".
Basically, the app should be fixed for using libstorage APIs correctly.
However, we will provide some backward compatibility patches to reduce PAINS.
Change-Id: I040736e3069104f9f9f4da3bd6b9c03c559bfe95
Taeyoung Kim [Fri, 13 May 2016 02:44:18 +0000 (11:44 +0900)]
battery: add dbus method to get all of battery information
- Apps want to know the battery status in detail, and thus
the getter of the all battery information is required
Change-Id: I5b21e9f73f83cab1aaec73802933a8814f259984
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Taeyoung Kim [Wed, 4 May 2016 07:51:54 +0000 (16:51 +0900)]
battery: apply battery HAL
- Previously, battery module checked uevents and standard interfaces
of mainline kernel. This is standard, but it cannot be used with
other version of kernels such as android kernel. Thus battery HAL
is applied.
Change-Id: I021d9c09232f86897903097de6cb7e5ca8d46303
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Taeyoung Kim [Mon, 13 Jun 2016 06:29:41 +0000 (15:29 +0900)]
block: send device insert/remove signal with device information
- Previously, insert/remove signals just contain the dbus object
information. Thus just devnode information need to be compared
to distinguish devices.
- Now, insert/remove signals with device information are newly
added. The signals do not contain dbus object information but
contain device infotmation.
Change-Id: Idbe26696fac1c9952c0f241cb810a1ad7ca99c16
Signed-off-by: Taeyoung Kim <ty317.kim@samsung.com>
taeyoung [Tue, 14 Jun 2016 09:41:37 +0000 (18:41 +0900)]
Revert "Revert "display: enable auto sleep for suspend mode""
This reverts commit
4b3b175c394d45a3273ce00815cd1c4a61d81a7a.
Change-Id: I71d510ba06548ab32d849d46e1e6291b39000d09
Signed-off-by: taeyoung <ty317.kim@samsung.com>
Taeyoung Kim [Thu, 31 Mar 2016 00:34:17 +0000 (09:34 +0900)]
display: deny LCD DIM request for TV profile
- TV profile does not have LCD DIM state. However
apps can request to change display state to dim state.
Thus available state check routine is added to
lock/unlock/change state functions.
Change-Id: I836315b5b233c0cc931a79313285f6e0c419b6e2
Signed-off-by: Taeyoung Kim <ty317.kim@samsung.com>
Taeyoung Kim [Wed, 11 May 2016 00:24:56 +0000 (09:24 +0900)]
block: mount tmpfs on block mount root path
- Previously, block mount root path was just a directory.
Thus the mount path was remained if the storage is removed
after poweroff. This occurred malfunction of apps
which scan the mount root path.
- Now the block mount root path is mounted to tmpfs.
Thus the mount path is removed after poweroff.
Change-Id: Icc959bbd5bac9e20d7a182230ec40e56c23e752e
Signed-off-by: taeyoung <ty317.kim@samsung.com>