drm/i915: Reorder await_execution before await_request

Reorder the code so that we can reuse the await_execution from a special
case in await_request in the next patch.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526090753.11329-1-chris@chris-wilson.co.uk

drm/i915/display: Only query DP state of a DDI encoder

Avoid a NULL dereference for a mismatched encoder type, hit when
probing state for all encoders.

This is a band aid to prevent the OOPS as the right fix is "probably to
swap the psr vs infoframes.enable checks, or outright disappear from
this function" (Ville).

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1892
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525124912.16019-1-chris@chris-wilson.co.uk

drm/i915: Improve execute_cb struct packing

Reduce the irq_work llist for attaching the callbacks to the signal for
both smaller structs (two fewer pointers!) and simpler [debug] code:

Function                                     old     new   delta
irq_execute_cb                                35      34      -1
__igt_breadcrumbs_smoketest                 1684    1682      -2
i915_request_retire                         2003    1996      -7
__i915_request_create                       1047    1040      -7
__notify_execute_cb                          135     126      -9
__i915_request_ctor                          188     178     -10
__await_execution.part.constprop             451     440     -11
igt_wait_request                             924     714    -210

One minor artifact is that the order of cb exection is reversed. No
current use cases are affected by that change.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200526112051.10229-1-chris@chris-wilson.co.uk

drm/i915/execlists: Shortcircuit queue_prio() for no internal levels

If there are no internal levels and the user priority-shift is zero, we
can help the compiler eliminate some dead code:

Function                                     old     new   delta
start_timeslice                              169     154     -15
__execlists_submission_tasklet              4696    4659     -37

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525075347.582-4-chris@chris-wilson.co.uk

drm/i915/gt: Force the GT reset on shutdown

Before we return control to the system, and letting it reuse all the
pages being accessed by HW, we must disable the HW. At the moment, we
dare not reset the GPU if it will clobber the display, but once we know
the display has been disabled, we can proceed with the reset as we
shutdown the module. We know the next user must reinitialise the HW for
their purpose.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/489
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525151459.12083-1-chris@chris-wilson.co.uk

drm/i915/display: Fix early deref of 'dsb'

drivers/gpu/drm/i915/display/intel_dsb.c:177 intel_dsb_reg_write() warn: variable dereferenced before check 'dsb' (see line 175)

Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200524233900.25598-1-chris@chris-wilson.co.uk

drm/i915/gt: Stop cross-polluting PIN_GLOBAL with PIN_USER with no-ppgtt

In order to keep userptr distinct from ggtt mmaps in the eyes of
lockdep, we need to avoid marking those userptr vma as PIN_GLOBAL. (So
long as we comply with only using them as local PIN_USER!)

References: https://gitlab.freedesktop.org/drm/intel/-/issues/1880
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525075347.582-1-chris@chris-wilson.co.uk

drm/i915/gem: Suppress some random warnings

Leave the error propagation in place, but limit the warnings to only
show up in CI if the unlikely errors are hit.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525141957.3061-2-chris@chris-wilson.co.uk

drm/i915/gt: Cancel the flush worker more thoroughly

Since the worker may rearm, we currently are only guaranteed to flush
the work if we cancel the timer. If the work was running at the time we
try and cancel it, we will wait for it to complete, but it may leave
items in the pool and requeue the work. If we rearrange the immediate
discard of the pool then cancel the work, we know that the work cannot
rearm and so our flush will be final.

<0> [314.146044] i915_mod-1321    2.... 299799443us : intel_gt_fini_buffer_pool: intel_gt_fini_buffer_pool:227 GEM_BUG_ON(!list_empty(&pool->cache_list[n]))

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1920
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525141957.3061-1-chris@chris-wilson.co.uk

drm/i915/dsb: Pre allocate and late cleanup of cmd buffer

Pre-allocate command buffer in atomic_commit using intel_dsb_prepare
function which also includes pinning and map in cpu domain.

No functional change is dsb write/commit functions.

Now dsb get/put function is removed and ref-count mechanism is
not needed. Below dsb api added to do respective job mentioned
below.

intel_dsb_prepare - Allocate, pin and map the buffer.
intel_dsb_cleanup - Unpin and release the gem object.

RFC: Initial patch for design review.
v2: included _init() part in _prepare(). [Daniel, Ville]
v3: dsb_cleanup called after cleanup_planes. [Daniel]
v4: dsb structure is moved to intel_crtc_state from intel_crtc. [Maarten]
v5: dsb get/put/ref-count mechanism removed. [Maarten]
v6: Based on review feedback following changes are added,
- replaced intel_dsb structure by pointer in intel_crtc_state. [Maarten]
- passing intel_crtc_state to dsp-api to simplify the code. [Maarten]
- few dsb functions prototype modified to simplify code.
v7: added few cosmetic changes suggested by Jani and null check for
crtc_state in dsb_cleanup removed as suggested by Maarten.
v8: changed the function parameter to intel_crtc_state* of
ivb_load_lut_ext_max() from intel_crtc. [Maarten]
v9: error handling improved in _write() and prepare(). [Maarten]

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520130737.11240-1-animesh.manna@intel.com

drm/i915/gem: Avoid iterating an empty list

Our __sgt_iter assumes that the scattergather list has at least one
element. But during construction we may fail in allocating the first
page, and so mark the first element as the terminator. This is
unexpected!

[22555.524752] RIP: 0010:shmem_get_pages+0x506/0x710 [i915]
[22555.524759] Code: 49 8b 2c 24 31 c0 66 89 44 24 40 48 85 ed 0f 84 62 01 00 00 4c 8b 75 00 8b 5d 08 44 8b 7d 0c 48 8b 0d 7e 34 07 e2 49 83 e6 fc <49> 8b 16 41 01 df 48 89 cf 48 89 d0 48 c1 e8 2d 48 85 c9 0f 84 c8
[22555.524765] RSP: 0018:ffffc9000053f9d0 EFLAGS: 00010246
[22555.524770] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8881ffffa000
[22555.524774] RDX: fffffffffffffff4 RSI: ffffffffffffffff RDI: ffffffff821efe00
[22555.524778] RBP: ffff8881b099ab00 R08: 0000000000000000 R09: 00000000fffffff4
[22555.524782] R10: 0000000000000002 R11: 00000000ffec0a02 R12: ffff8881cd3c8d60
[22555.524786] R13: 00000000fffffff4 R14: 0000000000000000 R15: 0000000000000000
[22555.524790] FS:  00007f4fbeb9b9c0(0000) GS:ffff8881f8580000(0000) knlGS:0000000000000000
[22555.524795] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[22555.524799] CR2: 0000000000000000 CR3: 00000001ec7f0004 CR4: 00000000001606e0
[22555.524803] Call Trace:
[22555.524919]  __i915_gem_object_get_pages+0x4f/0x60 [i915]

Fixes: 85d1225ec066 ("drm/i915: Introduce & use new lightweight SGL iterators")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522132706.5133-1-chris@chris-wilson.co.uk

drm/i915: Fix includes and local vars order

Removed duplicate include and fixed comment > 80 chars.

v2: Added newline after system include and between functions

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522131843.20477-1-stanislav.lisovskiy@intel.com

agp/intel: Fix a memory leak on module initialisation failure

In intel_gtt_setup_scratch_page(), pointer "page" is not released if
pci_dma_mapping_error() return an error, leading to a memory leak on
module initialisation failure.  Simply fix this issue by freeing "page"
before return.

Fixes: 0e87d2b06cb46 ("intel-gtt: initialize our own scratch page")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522083451.7448-1-chris@chris-wilson.co.uk

drm/i915/ehl: Extend w/a 14010685332 to JSP/MCC

This is a permanent w/a for JSL/EHL.This is to be applied to the
PCH types on JSL/EHL ie JSP/MCC
Bspec: 52888

v2: Fixed the wrong usage of logical OR(ville)
v3: Removed extra braces, changed the check(jose)

Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521064448.29522-1-swathi.dhanavanthri@intel.com

drm/i915: Remove unneeded hack now for CDCLK

No need to bump up CDCLK now, as it is now correctly
calculated, accounting for DBuf BW as BSpec says.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-8-stanislav.lisovskiy@intel.com

drm/i915: Adjust CDCLK accordingly to our DBuf bw needs

According to BSpec max BW per slice is calculated using formula
Max BW = CDCLK * 64. Currently when calculating min CDCLK we
account only per plane requirements, however in order to avoid
FIFO underruns we need to estimate accumulated BW consumed by
all planes(ddb entries basically) residing on that particular
DBuf slice. This will allow us to put CDCLK lower and save power
when we don't need that much bandwidth or gain additional
performance once plane consumption grows.

v2: - Fix long line warning
    - Limited new DBuf bw checks to only gens >= 11

v3: - Lets track used Dbuf bw per slice and per crtc in bw state
      (or may be in DBuf state in future), that way we don't need
      to have all crtcs in state and those only if we detect if
      are actually going to change cdclk, just same way as we
      do with other stuff, i.e intel_atomic_serialize_global_state
      and co. Just as per Ville's paradigm.
    - Made dbuf bw calculation procedure look nicer by introducing
      for_each_dbuf_slice_in_mask - we often will now need to iterate
      slices using mask.
    - According to experimental results CDCLK * 64 accounts for
      overall bandwidth across all dbufs, not per dbuf.

v4: - Fixed missing const(Ville)
    - Removed spurious whitespaces(Ville)
    - Fixed local variable init(reduced scope where not needed)
    - Added some comments about data rate for planar formats
    - Changed struct intel_crtc_bw to intel_dbuf_bw
    - Moved dbuf bw calculation to intel_compute_min_cdclk(Ville)

v5: - Removed unneeded macro

v6: - Prevent too frequent CDCLK switching back and forth:
      Always switch to higher CDCLK when needed to prevent bandwidth
      issues, however don't switch to lower CDCLK earlier than once
      in 30 minutes in order to prevent constant modeset blinking.
      We could of course not switch back at all, however this is
      bad from power consumption point of view.

v7: - Fixed to track cdclk using bw_state, modeset will be now
      triggered only when CDCLK change is really needed.

v8: - Lock global state if bw_state->min_cdclk is changed.
    - Try getting bw_state only if there are crtcs in the commit
      (need to have read-locked global state)

v9: - Do not do Dbuf bw check for gens < 9 - triggers WARN
      as ddb_size is 0.

v10: - Lock global state for older gens as well.

v11: - Define new bw_calc_min_cdclk hook, instead of using
       a condition(Manasi Navare)

v12: - Fixed rebase conflict

v13: - Added spaces after declarations to make checkpatch happy.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520150058.16123-1-stanislav.lisovskiy@intel.com

drm/i915: Introduce for_each_dbuf_slice_in_mask macro

We quite often need now to iterate only particular dbuf slices
in mask, whether they are active or related to particular crtc.

v2: - Minor code refactoring
v3: - Use enum for max slices instead of macro

Let's make our life a bit easier and use a macro for that.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-6-stanislav.lisovskiy@intel.com

drm/i915: Plane configuration affects CDCLK in Gen11+

So lets support it.

v2: - Fixed "from" field which got corrupted for some weird reason

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520145945.15997-1-stanislav.lisovskiy@intel.com

drm/i915: Check plane configuration properly

Checking with hweight8 if plane configuration had
changed seems to be wrong as different plane configs
can result in a same hamming weight.
So lets check the bitmask itself.

v2: Fixed "from" field which got corrupted for some weird reason

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520145827.15887-1-stanislav.lisovskiy@intel.com

drm/i915: Extract cdclk requirements checking to separate function

In Gen11+ whenever we might exceed DBuf bandwidth we might need to
recalculate CDCLK which DBuf bandwidth is scaled with.
Total Dbuf bw used might change based on particular plane needs.

Thus to calculate if cdclk needs to be changed it is not enough
anymore to check plane configuration and plane min cdclk, per DBuf
bw can be calculated only after wm/ddb calculation is done and
all required planes are added into the state. In order to keep
all min_cdclk related checks in one place let's extract it into
separate function, checking and modifying any_ms.

Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-3-stanislav.lisovskiy@intel.com

drm/i915: Decouple cdclk calculation from modeset checks

We need to calculate cdclk after watermarks/ddb has been calculated
as with recent hw CDCLK needs to be adjusted accordingly to DBuf
requirements, which is not possible with current code organization.

Setting CDCLK according to DBuf BW requirements and not just rejecting
if it doesn't satisfy BW requirements, will allow us to save power when
it is possible and gain additional bandwidth when it's needed - i.e
boosting both our power management and perfomance capabilities.

This patch is preparation for that, first we now extract modeset
calculation from modeset checks, in order to call it after wm/ddb
has been calculated.

v2: - Extract only intel_modeset_calc_cdclk from intel_modeset_checks
      (Ville Syrjälä)

v3: - Clear plls after intel_modeset_calc_cdclk

v4: - Added r-b from previous revision to commit message

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-2-stanislav.lisovskiy@intel.com

drm/i915: Remove PIN_UPDATE for i915_vma_pin

As we no longer use PIN_UPDATE (since commit 7d0aa0db4375 ("drm/i915/gem:
Unbind all current vma on changing cache-level")) we can remove
PIN_UPDATE itself. The benefit is just in simplifing the vma bind.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521144949.25357-1-chris@chris-wilson.co.uk

drm/i915: Avoid using rq->engine after free during i915_fence_release

In order to be valid to dereference during the i915_fence_release, after
retiring the fence and releasing its refererences, we assume that
rq->engine can only be a real engine (that stay intact until the device
is shutdown after all fences have been flushed). However, due to a quirk
of preempt-to-busy, we may retire a request that still belongs to a
virtual engine and so eventually free it with rq->engine being invalid.
To avoid dereferencing that invalid engine, we look at the
execution_mask which if it indicates it may be executed on more than one
engine, we know it originated on a virtual engine and may still be on
one.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1906
Fixes: 43acd6516ca9 ("drm/i915: Keep a per-engine request pool")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521140617.30015-2-chris@chris-wilson.co.uk

drm/i915: Disable semaphore inter-engine sync without timeslicing

Since the removal of the no-semaphore boosting, we rely on timeslicing to
reorder passed inter-dependency hogs across the engines. However, we
require preemption to support timeslicing into user payloads, and not all
machine support preemption so we do not universally enable timeslicing,
even when it would correctly preempt our own inter-engine semaphores.
Since timeslicing and semaphore priority deboosting is now disabled on
Broadwell/Braswell, we have to follow suite and not use semaphores.

Testcase: igt/gem_exec_schedule/semaphore-codependency # bdw/bsw
Fixes: 18e4af04d218 ("drm/i915: Drop no-semaphore boosting")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521140617.30015-1-chris@chris-wilson.co.uk

drm/i915/selftests: Flush the submission, not cancel it!

Use intel_engine_flush_submission() when we want to ensure that the
tasklet is run. tasklet_kill(), while it may ensure that an ongoing
tasklet is completed, also prevents the tasklet from running if it's
already scheduled and hasn't yet been run.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1874
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521124304.3157692-1-chris@chris-wilson.co.uk

drm/i915/selftests: Measure CS_TIMESTAMP

Count the number of CS_TIMESTAMP ticks and check that it matches our
expectations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200521071059.31726-1-chris@chris-wilson.co.uk

drm/i915/ehl: Wa_22010271021

Reflect recent Bspec changes.

Bspec: 33451

Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519162534.10035-1-matthew.s.atwood@intel.com

drm/i915/rkl: RKL only uses PHY_MISC for PHY's A and B

Since the number of platforms with this restriction are growing, let's
separate out the platform logic into a has_phy_misc() function.

Bspec: 50107
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-11-matthew.d.roper@intel.com

drm/i915/rkl: Add power well support

RKL power wells are similar to TGL power wells, but have some important
differences:

 * PG1 now has pipe A's VDSC (rather than sticking it in PG2)
 * PG2 no longer exists
 * DDI-C (aka TC-1) moves from PG1 -> PG3
 * PG5 no longer exists due to the lack of a fourth pipe

Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
be programmed as TC-1 and TC-2 even though this platform doesn't have TC
outputs.

Bspec: 49234
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-9-matthew.d.roper@intel.com

drm/i915/rkl: Limit number of universal planes to 5

RKL only has five universal planes, plus a cursor.  Since the
bottom-most universal plane is considered the primary plane, set the
number of sprites available on this platform to 4.

In general, the plane capabilities of the remaining planes stay the same
as TGL.  However the NV12 Y-plane support moves down to the new top two
planes and now only the bottom three planes can be used for NV12 UV.

Bspec: 49181
Bspec: 49251
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-8-matthew.d.roper@intel.com

drm/i915/rkl: Update memory bandwidth parameters

The RKL platform has different memory characteristics from past
platforms.  Update the values used by our memory bandwidth calculations
accordingly.

Bspec: 53998
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-7-matthew.d.roper@intel.com

x86/gpu: add RKL stolen memory support

RKL re-uses the same stolen memory registers as TGL and ICL.

Bspec: 52055
Bspec: 49589
Bspec: 49636
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-3-matthew.d.roper@intel.com

drm/i915/gt: Remove errant assertion in __intel_context_do_pin

This assertion was removed in commit b412c63f1cba ("drm/i915/gt: Report
context-is-closed prior to pinning"), but accidentally restored by a
cherry-pick into drm-next and now has percolated back to
drm-intel-next-queued.

Fixes: 2e46a2a0b014 ("drm/i915: Use explicit flag to mark unreachable intel_context")
Fixes: 2b703bbda271 ("Merge drm/drm-next into drm-intel-next-queued")
References: b412c63f1cba ("drm/i915/gt: Report context-is-closed prior to pinning")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520073048.2394034-1-chris@chris-wilson.co.uk

drm/i915/rkl: Add PCH support

Rocket Lake can pair with either TGP or CMP.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-6-matthew.d.roper@intel.com

drm/i915/rkl: Load DMC firmware for Rocket Lake

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-5-matthew.d.roper@intel.com

drm/i915/rkl: Re-use TGL GuC/HuC firmware

RKL uses the same GuC and HuC as TGL and should load the same firmwares.

Bspec: 50668
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-4-matthew.d.roper@intel.com

drm/i915/rkl: Add RKL platform info and PCI ids

Introduce the basic platform definition, macros, and PCI IDs.

Bspec: 44501
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Caz Yokoyama <caz.yokoyama@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Caz Yokoyama <caz.yokoyama@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-2-matthew.d.roper@intel.com

drm/i915/gt: Incorporate the virtual engine into timeslicing

It was quite the oversight to only factor in the normal queue to decide
the timeslicing switch priority. By leaving out the next virtual request
from the priority decision, we would not timeslice the current engine if
there was an available virtual request.

Testcase: igt/gem_exec_balancer/sliced
Fixes: 3df2deed411e ("drm/i915/execlists: Enable timeslice on partial virtual engine dequeue")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-3-chris@chris-wilson.co.uk

drm/i915/gt: Kick virtual siblings on timeslice out

If we decide to timeslice out the current virtual request, we will
unsubmit it while it is still busy (ve->context.inflight == sibling[0]).
If the virtual tasklet and then the other sibling tasklets run before we
completely schedule out the active virtual request for the preemption,
those other tasklets will see that the virtul request is still inflight
on sibling[0] and leave it be. Therefore when we finally schedule-out
the virtual request and if we see that we have passed it back to the
virtual engine, reschedule the virtual tasklet so that it may be
resubmitted on any of the siblings.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-2-chris@chris-wilson.co.uk

drm/i915/selftests: Add tests for timeslicing virtual engines

Make sure that we can execute a virtual request on an already busy
engine, and conversely that we can execute a normal request if the
engines are already fully occupied by virtual requests.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519132046.22443-1-chris@chris-wilson.co.uk

drm/i915/selftests: Check for an initial-breadcrumb in wait_for_submit()

When we look at i915_request_is_started() we must be careful in case we
are using a request that does not have the initial-breadcrumb and
instead the is-started is being compared against the end of the previous
request. This will make wait_for_submit() declare that a request has
been already submitted too early.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-4-chris@chris-wilson.co.uk

drm/i915/selftests: Restore to default heartbeat

Since we temporarily disable the heartbeat and restore back to the
default value, we can use the stored defaults on the engine and avoid
using a local.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-3-chris@chris-wilson.co.uk

drm/i915/selftests: Change priority overflow detection

Check for integer overflow in the priority chain, rather than against a
type-constricted max-priority check.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-2-chris@chris-wilson.co.uk

drm/i915: Don't set queue-priority hint when supressing the reschedule

We recorded the execlists->queue_priority_hint update for the inflight
request without kicking the tasklet. The next submitted request then
failed to be scheduled as it had a lower priority than the hint, leaving
the HW running with only the inflight request.

Fixes: 6cebcf746f3f ("drm/i915: Tweak scheduler's kick_submission()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519063123.20673-1-chris@chris-wilson.co.uk

drm/i915/selftests: Measure dispatch latency

A useful metric of the system's health is how fast we can tell the GPU
to do various actions, so measure our latency.

v2: Refactor all the instruction building into emitters.
v3: Mark the error handling if not perfect, at least consistent.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519130802.4067-1-chris@chris-wilson.co.uk

drm/i915/runtime_pm: Prefer drm_WARN* over WARN*

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN*.

Conversion is done with below semantic patch:

@@
identifier func, T;
@@
func(struct intel_runtime_pm *T,...) {
+ struct drm_i915_private *i915 = container_of(T, struct drm_i915_private, runtime_pm);
<+...
(
-WARN(
+drm_WARN(&i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>

}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-10-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/pm: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Conversion is done with below sementic patch:

@@
identifier func, T;
@@
func(...) {
...
struct intel_crtc *T = ...;
+struct drm_i915_private *dev_priv = to_i915(T->base.dev);
<+...
-WARN_ON(
+drm_WARN_ON(&dev_priv->drm,
...)
...+>

}

@@
identifier func, T;
@@
func(struct intel_crtc_state *T,...) {
+struct drm_i915_private *dev_priv = to_i915(T->uapi.crtc->dev);
<+...
-WARN_ON(
+drm_WARN_ON(&dev_priv->drm,
...)
...+>

}

changes since v1:
    - Added dev_priv local variable and used it in drm_WARN_ON calls (Jani)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-9-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/pmu: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-8-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/i915_drv: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

changes since v1:
- Add parentheses around the dev_priv macro argument (Jani)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-7-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/gem: Prefer drm_WARN* over WARN*

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN* at places where struct drm_device pointer
can be extracted.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-6-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/tc: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Conversion is done with below sementic patch:

@@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
...+>
}

@@
identifier func, T;
@@
func(struct intel_digital_port *T,...) {
+struct drm_i915_private *i915 = to_i915(T->base.base.dev);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>

}

changes since v1:
- Add i915 local variable and use it in drm_WARN_ON (Jani)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-5-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/sdvo: Prefer drm_WARN* over WARN*

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN* calls.

changes since v1:
- Added dev_priv local variable and used it in drm_WARN* calls (Jani)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-4-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/dp: Prefer drm_WARN* over WARN*

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN* at places where struct intel_dp or struct
drm_i915_private pointer is available.

Conversion is done with below sementic patch:

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule3@
identifier func, T;
@@
func(struct intel_dp *T,...) {
+ struct drm_i915_private *i915 = dp_to_i915(T);
<+...
(
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>

}

@rule4@
identifier func, T;
@@
func(...) {
...
struct intel_dp *T = ...;
+ struct drm_i915_private *i915 = dp_to_i915(T);
<+...
(
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>

}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-3-pankaj.laxminarayan.bharadiya@intel.com

drm/i915/display/display_power: Prefer drm_WARN_ON over WARN_ON

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON at places where struct i915_power_domains
struct is available.

Conversion is done with below sementic patch:

@@
identifier func, T;
@@
func(struct i915_power_domains *T,...) {
+ struct drm_i915_private *i915 = container_of(T, struct drm_i915_private, power_domains);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>

}

changes since v1:
- Fix commit subject (Jani)

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-2-pankaj.laxminarayan.bharadiya@intel.com

drm/i915: Fix AUX power domain toggling across TypeC mode resets

Make sure to select the port's AUX power domain while holding the TC
port lock. The domain depends on the port's current TC mode, which may
get changed under us if we're not holding the lock.

This was left out from
commit 8c10e2262663 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers")

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com

drm/i915: Read out hrawclk on all gen3+ platforms

I've checked a bunch of gen3/4 machines and all seem to have
consistent FSB frequency information in the CLKCFG register.
So let's read out hrawclk on all gen3+ machines. Although
apart from g4x/pnv aux/pps dividers we only really need this
for for i965g/gm cs timestamp increment.

The CLKCFG memory clock values seem less consistent but we
don't care about those here.

For posterity here's a list of CLKCFG vs. FSB dumps from
a bunch of machines (only missing lpt for a full set):
machine CLKCFG     FSB
alv1    0x00001411 533
alv2    0x00000420 400 (Chris)
gdg1    0x20000022 800
gdg2    0x20000022 800
cst     0x00010043 666
blb     0x00002034 1333
pnv1    0x00000423 666
pnv2    0x00000433 666
965gm   0x00004342 800
946gz   0x00000022 800
965g    0x00000422 800
g35     0x00000430 1066
        0x00000434 1333
ctg1    0x00644056 1066
ctg2    0x00644066 1066
elk1    0x00012420 1066
        0x00012424 1333
        0x00012436 1600
        0x00012422 800
elk2    0x00012040 1066

For the mobile parts the chipset docs generally have these
documented to some degree (alv being the exception).

The two settings w/o any evidence are 0x5=400MHz on desktop
and 0x7=1333MHz on mobile. Though the mobile 1333MHz case
probably doesn't even exist since ctg is only documented
to go up to 1066MHz.

v2: Fix 400mhz readout for Chris's alv/celeron machine
    Do a clean mobile vs. dekstop split since that's really
    what seems to be going on

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514123838.3017-3-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Document our lackluster FSB frequency readout

Document the fact that we aren't reading out the actual FSB
frequency but rather just the state of the FSB straps.
Some BIOSen allow you to configure the two independently.
So if someone sets the two up in an inconsistent manner
we'll get the wrong answer here and thus will end up with
incorrect aux/pps clock dividers. Alas, proper docs are no
longer around so we can't do any better.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514123838.3017-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix 400 MHz FSB readout on elk

Looks like elk redefines some of the CLKCFG FSB values to
make room for 400 MHz FSB. The setting overlaps with one of
the 266MHz settings (which is even documented in the ctg docs,
and cofirmed to be correct on my ctg). So we limit the special
case to elk only.

Though it might also be that we have some kind of desktop vs.
mobile difference going on here as eg. both g35 and elk
use 0x0 for the 266 MHz setting, vs. 0x6 used by ctg). The
g35 doesn't let me select 400MHz for the FSB strap so can't
confirm which way it would go here. But anyways as it seems
only elk has the 400MHz option we shouldn't lose anything
by limiting the special case to it alone.

My earlier experiments on this appear to have been nonsense as
the comment I added claims that FSB strap of 400MHz results in
a value of 0x4, but I've now retested it and I definitely get a
value of 0x6 instead. So let's remove that bogus comment.

v2: s/_ELK/_ALT/ in the define in anticipation of a full
    mobile vs. desktop CLKCFG split

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514123838.3017-1-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/display: Return error from dbuf allocation failure

drivers/gpu/drm/i915/intel_pm.c:5920 skl_ddb_add_affected_pipes() error: uninitialized symbol 'ret'.

Fixes: 3cf43cdc63fb ("drm/i915: Introduce proper dbuf state")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516190940.12675-1-chris@chris-wilson.co.uk

drm/i915: Fix dbuf slice mask when turning off all the pipes

The current dbuf slice computation only happens when there are
active pipes. If we are turning off all the pipes we just leave
the dbuf slice mask at it's previous value, which may be something
other that BIT(S1). If runtime PM will kick in it will however
turn off everything but S1. Then on the next atomic commit (if
the new dbuf slice mask matches the stale value we left behind)
the code will not turn on the other slices we now need. This will
lead to underruns as the planes are trying to use a dbuf slice
that's not powered up.

To work around let's just just explicitly set the dbuf slice mask
to BIT(S1) when we are turning off all the pipes. Really the code
should just calculate this stuff the same way regardless whether
the pipes are on or off, but we're not quite there yet (need a
bit more work on the dbuf state for that).

v2: Let's not put the fix into dead code

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 3cf43cdc63fb ("drm/i915: Introduce proper dbuf state")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200518121354.20401-1-ville.syrjala@linux.intel.com

drm/i915/gt: Reuse the tasklet priority for virtual as their siblings

In order to keep all the tasklets in the same execution lists and so
fifo ordered, be consistent and use the same priority for all.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200518081440.17948-3-chris@chris-wilson.co.uk

drm/i915/selftests: Refactor sibling selection

Tvrtko spotted that some selftests were using 'break' not 'continue',
which will fail for discontiguous engine layouts such as on Icelake
(which may have vcs0 and vcs2).

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200518102911.3463-1-chris@chris-wilson.co.uk

drm/i915: Mark check_shadow_context_ppgtt as maybe unused

When CONFIG_DRM_I915_DEBUG_GEM is not set, clang warns:

drivers/gpu/drm/i915/gvt/scheduler.c:884:1: warning: function
'check_shadow_context_ppgtt' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
check_shadow_context_ppgtt(struct execlist_ring_context *c, struct
intel_vgpu_mm *m)
^
1 warning generated.

This warning is similar to -Wunused-function but rather than warning
that the function is completely unused, it warns that it is used in some
expression within the file but that expression will be evaluated to a
constant or be optimized away in the final assembly, essentially making
it appeared used but really isn't. Usually, this happens when a function
or variable is only used in sizeof, where it will appear to be used but
will be evaluated at compile time and not be required to be emitted.

In this case, the function is only used in GEM_BUG_ON, which is defined
as BUILD_BUG_ON_INVALID, which intentionally follows this pattern. To
fix this warning, add __maybe_unused to make it clear that this is
intentional depending on the configuration.

Fixes: bec3df930fbd ("drm/i915/gvt: Support PPGTT table load command")
Link: https://github.com/ClangBuiltLinux/linux/issues/1027
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200516023545.3332334-1-natechancellor@gmail.com

drm/i915/gem: Retry faulthandlers on ENOSPC

As we no longer use the shmemfs allocation directly, we do not expect to
receive -ENOSPC from a backing store allocation. The potential sources
for -ENOSPC are then our own internal eviction code, so the choice is
either to kill the potential application with SIGBUS or to retry the
faulthandler.

In this patch we retry the fault handler, but since this is a should
never happen condition, it is arguable that we gather up copious debug
and kill the application. At worst, we cause an interruptible busy-wait,
stalling the application -- all causes should be transient and the
system should eventually recover. A small stall is hopefully a better
outcome than random oomkiller.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200515200031.12034-1-chris@chris-wilson.co.uk

drm/i915: Clean up dbuf debugs during .atomic_check()

Combine the two per-pipe dbuf debugs into one, and use the canonical
[CRTC:%d:%s] style to identify the crtc. Also use the same style as
the plane code uses for the ddb start/end, and prefix bitmask properly
with 0x to make it clear they are in fact bitmasks.

The "how many total slices we are going to use" debug we move to
outside the crtc loop so it gets printed only once at the end.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-12-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Move the dbuf pre/post plane update

Encapsulate the dbuf state more by moving the pre/post
plane functions out from intel_display.c. We stick them
into intel_pm.c since that's where the rest of the code
lives for now.

Eventually we should add a new file for this stuff at which
point we also need to decide if it makes sense to even split
the wm code from the ddb code, or to keep them together.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-11-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Nuke skl_ddb_get_hw_state()

skl_ddb_get_hw_state() is redundant and kinda called in thw wrong
spot anyway. Just kill it.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-10-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Introduce proper dbuf state

Add a global state to track the dbuf slices. Gets rid of all the nasty
coupling between state->modeset and dbuf recomputation. Also we can now
totally nuke state->active_pipe_changes.

dev_priv->wm.distrust_bios_wm still remains, but that too will get
nuked soon.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-9-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Unify the low level dbuf code

The low level dbuf slice code is rather inconsitent with its
functiona naming and organization. Make it more consistent.

Also share the enable/disable functions between all platforms
since the same code works just fine for all of them.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-8-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Polish some dbuf debugs

Polish some of the dbuf code to give more meaningful debug
messages and whatnot. Also we can switch over to the per-device
debugs/warns at the same time.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: Make skl_compute_dbuf_slices() behave consistently for all platforms

Currently skl_compute_dbuf_slices() returns 0 for any inactive pipe on
icl+, but returns BIT(S1) on pre-icl for any pipe (whether it's active or
not). Let's make the behaviour consistent and always return 0 for any
inactive pipe.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200225171125.28885-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915: avoid unused scale_user_to_hw() warning

After the function is no longer marked 'inline', there
is now a new warning pointing out that the only caller
is inside of an #ifdef:

drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function]
  493 | static u32 scale_user_to_hw(struct intel_connector *connector,
      |            ^~~~~~~~~~~~~~~~

Move the function itself into that #ifdef as well.

Fixes: 81b55ef1f47b ("drm/i915: drop a bunch of superfluous inlines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428213106.3139170-1-arnd@arndb.de

drm/i915: Protect overlay colorkey macro arguments

Put the customary () around the macro argument in the overlay
colorkey macros. And while at switch to using a consistent
case for the hex constants.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Enable pipe gamma for the overlay

We pass the plane data through the pipe gamma for all the other
planes. Can't see why we should treat the overlay differently,
so let's enable pipe gamma for it as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Configure overlay cc_out precision based on crtc gamma config

Put the overlay color conversion unit into 10bit mode if the
pipe isn't using the 8bit legacy gamma. Not 100% sure this is
what the intention of the bit was but makes at least some sense to
me.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-4-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix overlay colorkey for 30bpp and 8bpp

As with the video sprites the colorkey is always specified
as 8bpc. For 10bpc primary plane formats we just ignore the
two lsbs of each component. For C8 we'll replicate the same
key to each chanel, which is what the hardware wants.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix max cursor size for i915g/gm

Apparently the 128x128 and 256x256 ARGB cursor modes were
only added on LPT/CST.

While the display section of bspec isn't super clear on the
subject, it does highlight these two modes in a different
color, has a few changlog entries indicating the 256x256 mode
was added for a LPT DCN, and that the 128x128 mode was also
added later (though no DCN/platform note there).

The "device dependencies" bspec section does list the 256x256x32
as a new feature for LPT/CST, and goes on to mention that current
hw only has the 64x64x32 mode (which reinforces the notion that
the 128x128 mode was also added at the same time).

Testing on actual hardware confirms all of this. CI shows all
the 128x128 and 256x256 tests failing on GDG, and my ALV
definitely doesn't like them.

So we shall limit GDG/ALV to 64x64 only. And while at it
let's adjust the mobile gen2 case to list the two platforms
explicitly so that the if-ladder looks reasonably uniform.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028113036.27553-2-ville.syrjala@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Update DRIVER_DATE to 20200515

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Document locking guidelines

To ensure cross-driver locking compatibility, document the expected
guidelines for implementing the GEM locking in i915. Note that this
is a description of how things should end up after being reworked,
and does not reflect the current state of things.

v2: Use rst note:: tag (Rodrigo)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190830105053.17491-1-joonas.lahtinen@linux.intel.com

drm/i915: Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}()

Pull the code to do the CS timestamp ns<->ticks conversion into
helpers and use them all over.

The check in i915_perf_noa_delay_set() seems a bit dubious,
so we switch it to do what I assume it wanted to do all along
(ie. make sure the resulting delay in CS timestamp ticks
doesn't exceed 32bits)?

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-5-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Store CS timestamp frequency in Hz

kHz isn't accurate enough for storing the CS timestamp
frequency on some of the platforms. Store the value
in Hz instead.

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm/i915: Nuke pointless div by 64bit

Bunch of places use a 64bit divisor needlessly. Switch
to 32bit divisor.

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302143943.32676-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Enable SAGV support for Gen12

Flip the switch and enable SAGV support
for Gen12 also.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-4-stanislav.lisovskiy@intel.com

drm/i915: Restrict qgv points which don't have enough bandwidth.

According to BSpec 53998, we should try to
restrict qgv points, which can't provide
enough bandwidth for desired display configuration.

Currently we are just comparing against all of
those and take minimum(worst case).

v2: Fixed wrong PCode reply mask, removed hardcoded
    values.

v3: Forbid simultaneous legacy SAGV PCode requests and
    restricting qgv points. Put the actual restriction
    to commit function, added serialization(thanks to Ville)
    to prevent commit being applied out of order in case of
    nonblocking and/or nomodeset commits.

v4:
    - Minor code refactoring, fixed few typos(thanks to James Ausmus)
    - Change the naming of qgv point
      masking/unmasking functions(James Ausmus).
    - Simplify the masking/unmasking operation itself,
      as we don't need to mask only single point per request(James Ausmus)
    - Reject and stick to highest bandwidth point if SAGV
      can't be enabled(BSpec)

v5:
    - Add new mailbox reply codes, which seems to happen during boot
      time for TGL and indicate that QGV setting is not yet available.

v6:
    - Increase number of supported QGV points to be in sync with BSpec.

v7: - Rebased and resolved conflict to fix build failure.
    - Fix NUM_QGV_POINTS to 8 and moved that to header file(James Ausmus)

v8: - Don't report an error if we can't restrict qgv points, as SAGV
      can be disabled by BIOS, which is completely legal. So don't
      make CI panic. Instead if we detect that there is only 1 QGV
      point accessible just analyze if we can fit the required bandwidth
      requirements, but no need in restricting.

v9: - Fix wrong QGV transition if we have 0 planes and no SAGV
      simultaneously.

v10: - Fix CDCLK corruption, because of global state getting serialized
       without modeset, which caused copying of non-calculated cdclk
       to be copied to dev_priv(thanks to Ville for the hint).

v11: - Remove unneeded headers and spaces(Matthew Roper)
     - Remove unneeded intel_qgv_info qi struct from bw check and zero
       out the needed one(Matthew Roper)
     - Changed QGV error message to have more clear meaning(Matthew Roper)
     - Use state->modeset_set instead of any_ms(Matthew Roper)
     - Moved NUM_SAGV_POINTS from i915_reg.h to i915_drv.h where it's used
     - Keep using crtc_state->hw.active instead of .enable(Matthew Roper)
     - Moved unrelated changes to other patch(using latency as parameter
       for plane wm calculation, moved to SAGV refactoring patch)

v12: - Fix rebase conflict with own temporary SAGV/QGV fix.
     - Remove unnecessary mask being zero check when unmasking
       qgv points as this is completely legal(Matt Roper)
     - Check if we are setting the same mask as already being set
       in hardware to prevent error from PCode.
     - Fix error message when restricting/unrestricting qgv points
       to "mask/unmask" which sounds more accurate(Matt Roper)
     - Move sagv status setting to icl_get_bw_info from atomic check
       as this should be calculated only once.(Matt Roper)
     - Edited comments for the case when we can't enable SAGV and
       use only 1 QGV point with highest bandwidth to be more
       understandable.(Matt Roper)

v13: - Moved max_data_rate in bw check to closer scope(Ville Syrjälä)
     - Changed comment for zero new_mask in qgv points masking function
       to better reflect reality(Ville Syrjälä)
     - Simplified bit mask operation in qgv points masking function
       (Ville Syrjälä)
     - Moved intel_qgv_points_mask closer to gen11 SAGV disabling,
       however this still can't be under modeset condition(Ville Syrjälä)
     - Packed qgv_points_mask as u8 and moved closer to pipe_sagv_mask
       (Ville Syrjälä)
     - Extracted PCode changes to separate patch.(Ville Syrjälä)
     - Now treat num_planes 0 same as 1 to avoid confusion and
       returning max_bw as 0, which would prevent choosing QGV
       point having max bandwidth in case if SAGV is not allowed,
       as per BSpec(Ville Syrjälä)
     - Do the actual qgv_points_mask swap in the same place as
       all other global state parts like cdclk are swapped.
       In the next patch, this all will be moved to bw state as
       global state, once new global state patch series from Ville
       lands

v14: - Now using global state to serialize access to qgv points
     - Added global state locking back, otherwise we seem to read
       bw state in a wrong way.

v15: - Added TODO comment for near atomic global state locking in
       bw code.

v16: - Fixed intel_atomic_bw_* functions to be intel_bw_* as discussed
       with Jani Nikula.
     - Take bw_state_changed flag into use.

v17: - Moved qgv point related manipulations next to SAGV code, as
       those are semantically related(Ville Syrjälä)
     - Renamed those into intel_sagv_(pre)|(post)_plane_update
       (Ville Syrjälä)

v18: - Move sagv related calls from commit tail into
       intel_sagv_(pre)|(post)_plane_update(Ville Syrjälä)

v19: - Use intel_atomic_get_bw_(old)|(new)_state which is intended
       for commit tail stage.

v20: - Return max bandwidth for 0 planes(Ville)
     - Constify old_bw_state in bw_atomic_check(Ville)
     - Removed some debugs(Ville)
     - Added data rate to debug print when no QGV points(Ville)
     - Removed some comments(Ville)

v21, v22, v23: - Fixed rebase conflict

v24: - Changed PCode mask to use ICL_ prefix
v25: - Resolved rebase conflict

v26: - Removed redundant NULL checks(Ville)
     - Removed redundant error prints(Ville)

v27: - Use device specific drm_err(Ville)
     - Fixed parenthesis ident reported by checkpatch
       Line over 100 warns to be fixed together with
       existing code style.

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
[vsyrjala: Drop duplicate intel_sagv_{pre,post}_plane_update() prototypes
           and drop unused NUM_SAGV_POINTS define]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-3-stanislav.lisovskiy@intel.com

drm/i915: Add TGL+ SAGV support

Starting from TGL we need to have a separate wm0
values for SAGV and non-SAGV which affects
how calculations are done.

v2: Remove long lines
v3: Removed COLOR_PLANE enum references
v4, v5, v6: Fixed rebase conflict
v7: - Removed skl_plane_wm_level accessor from skl_allocate_pipe_ddb(Ville)
    - Removed sagv_uv_wm0(Ville)
    - can_sagv->use_sagv_wm(Ville)

v8: - Moved tgl_crtc_can_enable_sagv function up(Ville)
    - Changed comment regarding pipe_wm usage(Ville)
    - Call intel_can_enable_sagv and tgl_compute_sagv_wm only
      for Gen12(Ville)
    - Some sagv debugs removed(Ville)
    - skl_print_wm_changes improvements(Ville)
    - Do assignment instead of memcpy in
      skl_pipe_wm_get_hw_state(Ville)

v9: - Removed can_sagv variable(Ville)
    - Removed spurious line(Ville)
    - Changed u32 to unsigned int as agreed(Ville)
    - Assign sagv only for gen12 in
      skl_pipe_wm_get_hw_state(Ville)

Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
[vsyrjala: Remove the dead 'return false' from intel_crtc_can_enable_sagv()]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514074853.9508-2-stanislav.lisovskiy@intel.com

Merge tag 'gvt-next-2020-05-12' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2020-05-12

- Support PPGTT update via LRI cmd (Zhenyu)
- Remove extra kmap for shadow ctx update (Zhenyu)
- Move workload cleanup out of execlist handling code (Zhenyu)

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512094017.GX18545@zhen-hp.sh.intel.com

drm/i915/psr: Use new DP VSC SDP compute routine on PSR

In order to use a common VSC SDP Colorimetry calculating code on PSR,
it uses a new psr vsc sdp compute routine.
Because PSR routine has its own scenario and timings of writing a VSC SDP,
the current PSR routine needs to have its own drm_dp_vsc_sdp structure
member variable on struct i915_psr.

In order to calculate colorimetry information, intel_psr_update()
function and intel_psr_enable() function extend a drm_connector_state
argument.

There are no changes to PSR mechanism.

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Rebased
v8: Rebased
v10: When a PSR is enabled, it needs to add DP_SDP_VSC to
     infoframes.enable.
     It is needed for comparing between HW and pipe_state of VSC_SDP.
v11: If PSR is disabled by flag, it don't enable psr on pipe compute.
v12: Fix an inconsistent indenting

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-15-gwan-gyeong.mun@intel.com

drm/i915/dp: Add compute routine for DP PSR VSC SDP

In order to use a common VSC SDP Colorimetry calculating code on PSR,
it adds a compute routine for PSR VSC SDP.
As PSR routine can not use infoframes.vsc of crtc state, it also adds new
writing of DP SDPs (Secondary Data Packet) for PSR.
PSR routine has its own scenario and timings of writing a VSC SDP.

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: 1) Fix packing of VSC SDP where Pixel Encoding/Colorimetry Format is
        not supported.
     2) Change a checking of PSR state.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-14-gwan-gyeong.mun@intel.com

drm/i915: Stop sending DP SDPs on ddi disable

Call intel_dp_set_infoframes(false) function on intel_ddi_post_disable_dp()
to make sure not to send VSC SDP and HDR Metadata Infoframe SDP.

v5: Polish commit message [Uma]

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-13-gwan-gyeong.mun@intel.com

drm/i915: Program DP SDPs on pipe updates

Call intel_dp_set_infoframes() function on pipe updates to make sure
that we send VSC SDP and HDR Metadata Infoframe SDP (when applicable)
on fastsets.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-12-gwan-gyeong.mun@intel.com

drm/i915: Fix enabled infoframe states of lspcon

Compared to implementation of DP and HDMI's encoder->infoframes_enabled,
the lspcon's implementation returns its active state. (we expect enabled
infoframe states of HW.) It leads to pipe state mismatch error
when ddi_get_config is called.

Because the current implementation of lspcon is not ready to support
readout infoframes, we need to return 0 here.

In order to support readout to lspcon, we need to implement read_infoframe
and infoframes_enabled. And set_infoframes also have to set an appropriate
bit on crtc_state->infoframes.enable

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-11-gwan-gyeong.mun@intel.com

drm/i915: Add state readout for DP VSC SDP

Added state readout for DP VSC SDP and enabled state validation
for DP VSC SDP.

v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v10: Skip checking of VSC SDP when a crtc config has psr.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-10-gwan-gyeong.mun@intel.com

drm/i915: Add state readout for DP HDR Metadata Infoframe SDP

Added state readout for DP HDR Metadata Infoframe SDP.

v9: Rebased
v10: Rebased

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-9-gwan-gyeong.mun@intel.com

drm/i915: Program DP SDPs with computed configs

In order to use computed config for DP SDPs (DP VSC SDP and DP HDR Metadata
Infoframe SDP), it replaces intel_dp_vsc_enable() function and
intel_dp_hdr_metadata_enable() function to intel_dp_set_infoframes()
function.
And it removes unused functions.

Before:
 intel_dp_vsc_enable() and intel_dp_hdr_metadata_enable() compute sdp
 configs and program sdp registers on enable callback of encoder.

After:
 It separates computing of sdp configs and programming of sdp register.
 The compute config callback of encoder calls computing sdp configs.
 The enable callback of encoder calls programming sdp register.

v3: Rebased
v5: Polish commit message [Uma]
v10: Rebased

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-8-gwan-gyeong.mun@intel.com

drm/i915: Include DP VSC SDP in the crtc state dump

Dump out the DP VSC SDP in the normal crtc state dump

v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
    Use drm core's DP VSC SDP logging function

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-7-gwan-gyeong.mun@intel.com

drm/i915: Include DP HDR Metadata Infoframe SDP in the crtc state dump

Dump out the DP HDR Metadata Infoframe SDP in the normal crtc state dump.

HDMI Dynamic Range and Mastering (DRM) infoframe and DP HDR Metadata
Infoframe SDP use the same member variable in infoframes of crtc state.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-6-gwan-gyeong.mun@intel.com

drm/i915: Include HDMI DRM infoframe in the crtc state dump

Dump out the HDMI Dynamic Range and Mastering (DRM) infoframe in the
normal crtc state dump.

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-5-gwan-gyeong.mun@intel.com

drm: Add logging function for DP VSC SDP

When receiving video it is very useful to be able to log DP VSC SDP.
This greatly simplifies debugging.

v2: Minor style fix
v3: Move logging functions to drm core [Jani N]
v5: Rebased
v10: Rebased

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-4-gwan-gyeong.mun@intel.com

drm/i915/dp: Read out DP SDPs

It adds code to read the DP SDPs from the video DIP and unpack them into
the crtc state.

It adds routines that read out DP VSC SDP and DP HDR Metadata Infoframe SDP
In order to unpack DP VSC SDP, it adds intel_dp_vsc_sdp_unpack() function.
It follows DP 1.4a spec. [Table 2-116: VSC SDP Header Bytes] and
[Table 2-117: VSC SDP Payload for DB16 through DB18]

In order to unpack DP HDR Metadata Infoframe SDP, it adds
intel_dp_hdr_metadata_infoframe_sdp_unpack(). And it follows DP 1.4a spec.
([Table 2-125: INFOFRAME SDP v1.2 Header Bytes] and
[Table 2-126: INFOFRAME SDP v1.2 Payload Data Bytes - DB0 through DB31])
and CTA-861-G spec. [Table-42 Dynamic Range and Mastering InfoFrame].

A naming rule and style of intel_read_dp_sdp() function references
intel_read_infoframe() function of intel_hdmi.c

v2: Minor style fix
v3: Replace a structure name to drm_dp_vsc_sdp from intel_dp_vsc_sdp
v4: Use struct drm_device logging macros
v5: Addressed review comments from Uma
  - Polish commit message and comments
  - Combine the if checks of sdp.HB2 and sdp.HB3
  - Add 6bpc to unpacking of VSC SDP

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-3-gwan-gyeong.mun@intel.com

video/hdmi: Add Unpack only function for DRM infoframe

It adds an unpack only function for DRM infoframe for dynamic range and
mastering infoframe readout.
It unpacks the information data block contained in the binary buffer into
a structured frame of the HDMI Dynamic Range and Mastering (DRM)
information frame.

In contrast to hdmi_drm_infoframe_unpack() function, it does not verify
a checksum.

It can be used for unpacking a DP HDR Metadata Infoframe SDP case.
DP HDR Metadata Infoframe SDP uses the same Dynamic Range and Mastering
(DRM) information (CTA-861-G spec.) such as HDMI DRM infoframe.
But DP SDP header and payload structure are different from HDMI DRM
Infoframe. Therefore unpacking DRM infoframe for DP requires skipping of
a verifying checksum.

v9: Add clear comments to hdmi_drm_infoframe_unpack_only() and
    hdmi_drm_infoframe_unpack() (Laurent Pinchart)

Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200514060732.3378396-2-gwan-gyeong.mun@intel.com