Mike Kravetz [Tue, 14 May 2019 00:19:38 +0000 (17:19 -0700)]
hugetlbfs: on restore reserve error path retain subpool reservation
[ Upstream commit
0919e1b69ab459e06df45d3ba6658d281962db80 ]
When a huge page is allocated, PagePrivate() is set if the allocation
consumed a reservation. When freeing a huge page, PagePrivate is checked.
If set, it indicates the reservation should be restored. PagePrivate
being set at free huge page time mostly happens on error paths.
When huge page reservations are created, a check is made to determine if
the mapping is associated with an explicitly mounted filesystem. If so,
pages are also reserved within the filesystem. The default action when
freeing a huge page is to decrement the usage count in any associated
explicitly mounted filesystem. However, if the reservation is to be
restored the reservation/use count within the filesystem should not be
decrementd. Otherwise, a subsequent page allocation and free for the same
mapping location will cause the file filesystem usage to go 'negative'.
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G -4.0M 4.1G - /opt/hugepool
To fix, when freeing a huge page do not adjust filesystem usage if
PagePrivate() is set to indicate the reservation should be restored.
I did not cc stable as the problem has been around since reserves were
added to hugetlbfs and nobody has noticed.
Link: http://lkml.kernel.org/r/20190328234704.27083-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jérôme Glisse [Tue, 14 May 2019 00:19:45 +0000 (17:19 -0700)]
mm/hmm: select mmu notifier when selecting HMM
[ Upstream commit
734fb89968900b5c5f8edd5038bd4cdeab8c61d2 ]
To avoid random config build issue, select mmu notifier when HMM is
selected. In any cases when HMM get selected it will be by users that
will also wants the mmu notifier.
Link: http://lkml.kernel.org/r/20190403193318.16478-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 14 May 2019 22:41:48 +0000 (15:41 -0700)]
ARM: prevent tracing IPI_CPU_BACKTRACE
[ Upstream commit
be167862ae7dd85c56d385209a4890678e1b0488 ]
Patch series "compiler: allow all arches to enable
CONFIG_OPTIMIZE_INLINING", v3.
This patch (of 11):
When function tracing for IPIs is enabled, we get a warning for an
overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as
triggered by raise_nmi():
arch/arm/kernel/smp.c: In function 'raise_nmi':
arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds]
trace_ipi_raise(target, ipi_types[ipinr]);
This is a correct warning as we actually overflow the array here.
This patch raise_nmi() to call __smp_cross_call() instead of
smp_cross_call(), to avoid calling into ftrace. For clarification, I'm
also adding a two new code comments describing how this one is special.
The warning appears to have shown up after commit
e7273ff49acf ("ARM:
8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the
number assignment from '15' to '8', but as far as I can tell has existed
since the IPI tracepoints were first introduced. If we decide to
backport this patch to stable kernels, we probably need to backport
e7273ff49acf as well.
[yamada.masahiro@socionext.com: rebase on v5.1-rc1]
Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com
Fixes:
e7273ff49acf ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI")
Fixes:
365ec7b17327 ("ARM: add IPI tracepoints") # v3.17
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guenter Roeck [Mon, 13 May 2019 14:46:21 +0000 (07:46 -0700)]
drm/pl111: Initialize clock spinlock early
[ Upstream commit
3e01ae2612bdd7975c74ec7123d7f8f5e6eed795 ]
The following warning is seen on systems with broken clock divider.
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-09698-g1fb3b52 #1
Hardware name: ARM Integrator/CP (Device Tree)
[<
c0011be8>] (unwind_backtrace) from [<
c000ebb8>] (show_stack+0x10/0x18)
[<
c000ebb8>] (show_stack) from [<
c07d3fd0>] (dump_stack+0x18/0x24)
[<
c07d3fd0>] (dump_stack) from [<
c0060d48>] (register_lock_class+0x674/0x6f8)
[<
c0060d48>] (register_lock_class) from [<
c005de2c>]
(__lock_acquire+0x68/0x2128)
[<
c005de2c>] (__lock_acquire) from [<
c0060408>] (lock_acquire+0x110/0x21c)
[<
c0060408>] (lock_acquire) from [<
c07f755c>] (_raw_spin_lock+0x34/0x48)
[<
c07f755c>] (_raw_spin_lock) from [<
c0536c8c>]
(pl111_display_enable+0xf8/0x5fc)
[<
c0536c8c>] (pl111_display_enable) from [<
c0502f54>]
(drm_atomic_helper_commit_modeset_enables+0x1ec/0x244)
Since commit
eedd6033b4c8 ("drm/pl111: Support variants with broken clock
divider"), the spinlock is not initialized if the clock divider is broken.
Initialize it earlier to fix the problem.
Fixes:
eedd6033b4c8 ("drm/pl111: Support variants with broken clock divider")
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1557758781-23586-1-git-send-email-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Rongqing [Tue, 14 May 2019 22:46:20 +0000 (15:46 -0700)]
ipc: prevent lockup on alloc_msg and free_msg
[ Upstream commit
d6a2946a88f524a47cc9b79279667137899db807 ]
msgctl10 of ltp triggers the following lockup When CONFIG_KASAN is
enabled on large memory SMP systems, the pages initialization can take a
long time, if msgctl10 requests a huge block memory, and it will block
rcu scheduler, so release cpu actively.
After adding schedule() in free_msg, free_msg can not be called when
holding spinlock, so adding msg to a tmp list, and free it out of
spinlock
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-1 rcu_node (CPUs 16-31): P32505
rcu: Tasks blocked on level-1 rcu_node (CPUs 48-63): P34978
rcu: (detected by 11, t=35024 jiffies, g=
44237529, q=
16542267)
msgctl10 R running task 21608 32505 2794 0x00000082
Call Trace:
preempt_schedule_irq+0x4c/0xb0
retint_kernel+0x1b/0x2d
RIP: 0010:__is_insn_slot_addr+0xfb/0x250
Code: 82 1d 00 48 8b 9b 90 00 00 00 4c 89 f7 49 c1 ee 03 e8 59 83 1d 00 48 b8 00 00 00 00 00 fc ff df 4c 39 eb 48 89 9d 58 ff ff ff <41> c6 04 06 f8 74 66 4c 8d 75 98 4c 89 f1 48 c1 e9 03 48 01 c8 48
RSP: 0018:
ffff88bce041f758 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffff13
RAX:
dffffc0000000000 RBX:
ffffffff8471bc50 RCX:
ffffffff828a2a57
RDX:
dffffc0000000000 RSI:
dffffc0000000000 RDI:
ffff88bce041f780
RBP:
ffff88bce041f828 R08:
ffffed15f3f4c5b3 R09:
ffffed15f3f4c5b3
R10:
0000000000000001 R11:
ffffed15f3f4c5b2 R12:
000000318aee9b73
R13:
ffffffff8471bc50 R14:
1ffff1179c083ef0 R15:
1ffff1179c083eec
kernel_text_address+0xc1/0x100
__kernel_text_address+0xe/0x30
unwind_get_return_address+0x2f/0x50
__save_stack_trace+0x92/0x100
create_object+0x380/0x650
__kmalloc+0x14c/0x2b0
load_msg+0x38/0x1a0
do_msgsnd+0x19e/0xcf0
do_syscall_64+0x117/0x400
entry_SYSCALL_64_after_hwframe+0x49/0xbe
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-1 rcu_node (CPUs 0-15): P32170
rcu: (detected by 14, t=35016 jiffies, g=
44237525, q=
12423063)
msgctl10 R running task 21608 32170 32155 0x00000082
Call Trace:
preempt_schedule_irq+0x4c/0xb0
retint_kernel+0x1b/0x2d
RIP: 0010:lock_acquire+0x4d/0x340
Code: 48 81 ec c0 00 00 00 45 89 c6 4d 89 cf 48 8d 6c 24 20 48 89 3c 24 48 8d bb e4 0c 00 00 89 74 24 0c 48 c7 44 24 20 b3 8a b5 41 <48> c1 ed 03 48 c7 44 24 28 b4 25 18 84 48 c7 44 24 30 d0 54 7a 82
RSP: 0018:
ffff88af83417738 EFLAGS:
00000282 ORIG_RAX:
ffffffffffffff13
RAX:
dffffc0000000000 RBX:
ffff88bd335f3080 RCX:
0000000000000002
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff88bd335f3d64
RBP:
ffff88af83417758 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000001 R11:
ffffed13f3f745b2 R12:
0000000000000000
R13:
0000000000000002 R14:
0000000000000000 R15:
0000000000000000
is_bpf_text_address+0x32/0xe0
kernel_text_address+0xec/0x100
__kernel_text_address+0xe/0x30
unwind_get_return_address+0x2f/0x50
__save_stack_trace+0x92/0x100
save_stack+0x32/0xb0
__kasan_slab_free+0x130/0x180
kfree+0xfa/0x2d0
free_msg+0x24/0x50
do_msgrcv+0x508/0xe60
do_syscall_64+0x117/0x400
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Davidlohr said:
"So after releasing the lock, the msg rbtree/list is empty and new
calls will not see those in the newly populated tmp_msg list, and
therefore they cannot access the delayed msg freeing pointers, which
is good. Also the fact that the node_cache is now freed before the
actual messages seems to be harmless as this is wanted for
msg_insert() avoiding GFP_ATOMIC allocations, and after releasing the
info->lock the thing is freed anyway so it should not change things"
Link: http://lkml.kernel.org/r/1552029161-4957-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Brauner [Tue, 14 May 2019 22:44:55 +0000 (15:44 -0700)]
sysctl: return -EINVAL if val violates minmax
[ Upstream commit
e260ad01f0aa9e96b5386d5cd7184afd949dc457 ]
Currently when userspace gives us a values that overflow e.g. file-max
and other callers of __do_proc_doulongvec_minmax() we simply ignore the
new value and leave the current value untouched.
This can be problematic as it gives the illusion that the limit has
indeed be bumped when in fact it failed. This commit makes sure to
return EINVAL when an overflow is detected. Please note that this is a
userspace facing change.
Link: http://lkml.kernel.org/r/20190210203943.8227-4-christian@brauner.io
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hou Tao [Tue, 14 May 2019 22:44:32 +0000 (15:44 -0700)]
fs/fat/file.c: issue flush after the writeback of FAT
[ Upstream commit
bd8309de0d60838eef6fb575b0c4c7e95841cf73 ]
fsync() needs to make sure the data & meta-data of file are persistent
after the return of fsync(), even when a power-failure occurs later. In
the case of fat-fs, the FAT belongs to the meta-data of file, so we need
to issue a flush after the writeback of FAT instead before.
Also bail out early when any stage of fsync fails.
Link: http://lkml.kernel.org/r/20190409030158.136316-1-houtao1@huawei.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Tue, 14 May 2019 22:44:49 +0000 (15:44 -0700)]
rapidio: fix a NULL pointer dereference when create_workqueue() fails
[ Upstream commit
23015b22e47c5409620b1726a677d69e5cd032ba ]
In case create_workqueue fails, the fix releases resources and returns
-ENOMEM to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Acked-by: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 11 Jun 2019 10:20:57 +0000 (12:20 +0200)]
Linux 4.19.50
Yunsheng Lin [Wed, 26 Dec 2018 11:51:46 +0000 (19:51 +0800)]
ethtool: check the return value of get_regs_len
commit
f9fc54d313fab2834f44f516459cdc8ac91d797f upstream.
The return type for get_regs_len in struct ethtool_ops is int,
the hns3 driver may return error when failing to get the regs
len by sending cmd to firmware.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Sun, 5 May 2019 18:16:20 +0000 (11:16 -0700)]
ipv4: Define __ipv4_neigh_lookup_noref when CONFIG_INET is disabled
commit
9b3040a6aafd7898ece7fc7efcbca71e42aa8069 upstream.
Define __ipv4_neigh_lookup_noref to return NULL when CONFIG_INET is disabled.
Fixes:
4b2a2bfeb3f0 ("neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Wed, 17 Apr 2019 08:58:53 +0000 (10:58 +0200)]
TTY: serial_core, add ->install
commit
4cdd17ba1dff20ffc99fdbd2e6f0201fc7fe67df upstream.
We need to compute the uart state only on the first open. This is
usually what is done in the ->install hook. serial_core used to do this
in ->open on every open. So move it to ->install.
As a side effect, it ensures the state is set properly in the window
after tty_init_dev is called, but before uart_open. This fixes a bunch
of races between tty_open and flush_to_ldisc we were dealing with
recently.
One of such bugs was attempted to fix in commit
fedb5760648a (serial:
fix race between flush_to_ldisc and tty_open), but it only took care of
a couple of functions (uart_start and uart_unthrottle). I was able to
reproduce the crash on a SLE system, but in uart_write_room which is
also called from flush_to_ldisc via process_echoes. I was *unable* to
reproduce the bug locally. It is due to having this patch in my queue
since 2012!
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 5 Comm: kworker/u4:0 Tainted: G L 4.12.14-396-default #1 SLE15-SP1 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound flush_to_ldisc
task:
ffff8800427d8040 task.stack:
ffff8800427f0000
RIP: 0010:uart_write_room+0xc4/0x590
RSP: 0018:
ffff8800427f7088 EFLAGS:
00010202
RAX:
dffffc0000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
000000000000002f RSI:
00000000000000ee RDI:
ffff88003888bd90
RBP:
ffffffffb9545850 R08:
0000000000000001 R09:
0000000000000400
R10:
ffff8800427d825c R11:
000000000000006e R12:
1ffff100084fee12
R13:
ffffc900004c5000 R14:
ffff88003888bb28 R15:
0000000000000178
FS:
0000000000000000(0000) GS:
ffff880043300000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000561da0794148 CR3:
000000000ebf4000 CR4:
00000000000006e0
Call Trace:
tty_write_room+0x6d/0xc0
__process_echoes+0x55/0x870
n_tty_receive_buf_common+0x105e/0x26d0
tty_ldisc_receive_buf+0xb7/0x1c0
tty_port_default_receive_buf+0x107/0x180
flush_to_ldisc+0x35d/0x5c0
...
0 in rbx means tty->driver_data is NULL in uart_write_room. 0x178 is
tried to be dereferenced (0x178 >> 3 is 0x2f in rdx) at
uart_write_room+0xc4. 0x178 is exactly (struct uart_state *)NULL->refcount
used in uart_port_lock from uart_write_room.
So revert the upstream commit here as my local patch should fix the
whole family.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Wang Li <wangli39@baidu.com>
Cc: Zhang Yu <zhangyu31@baidu.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tina Zhang [Wed, 22 May 2019 22:18:36 +0000 (06:18 +0800)]
drm/i915/gvt: Initialize intel_gvt_gtt_entry in stack
commit
387a4c2b55291b37e245c840813bd8a8bd06ed49 upstream.
Stack struct intel_gvt_gtt_entry value needs to be initialized before
being used, as the fields may contain garbage values.
W/o this patch, set_ggtt_entry prints:
-------------------------------------
274.046840: set_ggtt_entry: vgpu1:set ggtt entry 0x9bed8000ffffe900
274.046846: set_ggtt_entry: vgpu1:set ggtt entry 0xe55df001
274.046852: set_ggtt_entry: vgpu1:set ggtt entry 0x9bed8000ffffe900
0x9bed8000 is the stack grabage.
W/ this patch, set_ggtt_entry prints:
------------------------------------
274.046840: set_ggtt_entry: vgpu1:set ggtt entry 0xffffe900
274.046846: set_ggtt_entry: vgpu1:set ggtt entry 0xe55df001
274.046852: set_ggtt_entry: vgpu1:set ggtt entry 0xffffe900
v2:
- Initialize during declaration. (Zhenyu)
Fixes:
7598e8700e9a ("drm/i915/gvt: Missed to cancel dma map for ggtt entries")
Cc: stable@vger.kernel.org # v4.20+
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helen Koike [Mon, 3 Jun 2019 16:56:10 +0000 (13:56 -0300)]
drm: don't block fb changes for async plane updates
commit
89a4aac0ab0e6f5eea10d7bf4869dd15c3de2cd4 upstream.
In the case of a normal sync update, the preparation of framebuffers (be
it calling drm_atomic_helper_prepare_planes() or doing setups with
drm_framebuffer_get()) are performed in the new_state and the respective
cleanups are performed in the old_state.
In the case of async updates, the preparation is also done in the
new_state but the cleanups are done in the new_state (because updates
are performed in place, i.e. in the current state).
The current code blocks async udpates when the fb is changed, turning
async updates into sync updates, slowing down cursor updates and
introducing regressions in igt tests with errors of type:
"CRITICAL: completed 97 cursor updated in a period of 30 flips, we
expect to complete approximately 15360 updates, with the threshold set
at 7680"
Fb changes in async updates were prevented to avoid the following scenario:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong)
Where we have a single call to prepare fb2 but double cleanup call to fb2.
To solve the above problems, instead of blocking async fb changes, we
place the old framebuffer in the new_state object, so when the code
performs cleanups in the new_state it will cleanup the old_fb and we
will have the following scenario instead:
- Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup
- Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1
- Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2
Where calls to prepare/cleanup are balanced.
Cc: <stable@vger.kernel.org> # v4.14+
Fixes:
25dc194b34dd ("drm: Block fb changes for async plane updates")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-6-helen.koike@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Corbet [Thu, 23 May 2019 16:06:46 +0000 (10:06 -0600)]
drm/i915: Maintain consistent documentation subsection ordering
commit
551bd3368a7b3cfef01edaade8970948d178d40a upstream.
With Sphinx 2.0 (or prior versions with the deprecation warnings fixed) the
docs build fails with:
Documentation/gpu/i915.rst:403: WARNING: Title level inconsistent:
Global GTT Fence Handling
~~~~~~~~~~~~~~~~~~~~~~~~~
reST markup error:
Documentation/gpu/i915.rst:403: (SEVERE/4) Title level inconsistent:
I "fixed" it by changing the subsections in i915.rst, but that didn't seem
like the correct change. It turns out that a couple of i915 files create
their own subsections in kerneldoc comments using apostrophes as the
heading marker:
Layout
''''''
That breaks the normal subsection marker ordering, and newer Sphinx is
rather more strict about enforcing that ordering. So fix the offending
comments to make Sphinx happy.
(This is unfortunate, in that kerneldoc comments shouldn't need to be aware
of where they might be included in the heading hierarchy, but I don't see
a better way around it).
Cc: stable@vger.kernel.org # v4.14+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Drake [Tue, 23 Apr 2019 09:28:10 +0000 (17:28 +0800)]
drm/i915/fbc: disable framebuffer compression on GeminiLake
commit
396dd8143bdd94bd1c358a228a631c8c895a1126 upstream.
On many (all?) the Gemini Lake systems we work with, there is frequent
momentary graphical corruption at the top of the screen, and it seems
that disabling framebuffer compression can avoid this.
The ticket was reported 6 months ago and has already affected a
multitude of users, without any real progress being made. So, lets
disable framebuffer compression on GeminiLake until a solution is found.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108085
Fixes:
fd7d6c5c8f3e ("drm/i915: enable FBC on gen9+ too")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190423092810.28359-1-jian-hong@endlessm.com
(cherry picked from commit
1d25724b41fad7eeb2c3058a5c8190d6ece73e08)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Fri, 1 Mar 2019 14:03:47 +0000 (14:03 +0000)]
drm/i915: Fix I915_EXEC_RING_MASK
commit
d90c06d57027203f73021bb7ddb30b800d65c636 upstream.
This was supposed to be a mask of all known rings, but it is being used
by execbuffer to filter out invalid rings, and so is instead mapping high
unused values onto valid rings. Instead of a mask of all known rings,
we need it to be the mask of all possible rings.
Fixes:
549f7365820a ("drm/i915: Enable SandyBridge blitter ring")
Fixes:
de1add360522 ("drm/i915: Decouple execbuf uAPI from internal implementation")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-21-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaron Liu [Tue, 30 Apr 2019 01:47:25 +0000 (09:47 +0800)]
drm/amdgpu: remove ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check when hotplug-in
commit
bdb1ccb080dafc1b4224873a5b759ff85a7d1c10 upstream.
In amdgpu_atif_handler, when hotplug event received, remove
ATPX_DGPU_REQ_POWER_FOR_DISPLAYS check. This bit's check will cause missing
system resume.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian König [Mon, 6 May 2019 17:57:52 +0000 (19:57 +0200)]
drm/radeon: prefer lower reference dividers
commit
2e26ccb119bde03584be53406bbd22e711b0d6e6 upstream.
Instead of the closest reference divider prefer the lowest,
this fixes flickering issues on HP Compaq nx9420.
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=108514
Suggested-by: Paul Dufresne <dufresnep@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Thu, 9 May 2019 02:45:06 +0000 (21:45 -0500)]
drm/amdgpu/psp: move psp version specific function pointers to early_init
commit
9d6fea5744d6798353f37ac42a8a653a2607ca69 upstream.
In case we need to use them for GPU reset prior initializing the
asic. Fixes a crash if the driver attempts to reset the GPU at driver
load time.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ryan Pavlik [Mon, 3 Dec 2018 16:46:44 +0000 (10:46 -0600)]
drm: add non-desktop quirks to Sensics and OSVR headsets.
commit
29054230f3e11ea818eccfa7bb4e4b3e89544164 upstream.
Add two EDID vendor/product pairs used across a variety of
Sensics products, as well as the OSVR HDK and HDK 2.
Signed-off-by: Ryan Pavlik <ryan.pavlik@collabora.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203164644.13974-1-ryan.pavlik@collabora.com
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dave Airlie [Thu, 18 Apr 2019 06:45:15 +0000 (16:45 +1000)]
drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)
commit
b30a43ac7132cdda833ac4b13dd1ebd35ace14b7 upstream.
There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.
Full context of the story:
commit
0e975980d435d58df2d430d688b8c18778b42218
Author: Peter Antoine <peter.antoine@intel.com>
Date: Tue Jun 23 08:18:49 2015 +0100
drm: Turn off Legacy Context Functions
The context functions are not used by the i915 driver and should not
be used by modeset drivers. These driver functions contain several bugs
and security holes. This change makes these functions optional can be
turned on by a setting, they are turned off by default for modeset
driver with the exception of the nouvea driver that may require them with
an old version of libdrm.
The previous attempt was
commit
7c510133d93dd6f15ca040733ba7b2891ed61fd1
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 8 15:41:21 2013 +0200
drm: mark context support as a legacy subsystem
but this had to be reverted
commit
c21eb21cb50d58e7cbdcb8b9e7ff68b85cfa5095
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Sep 20 08:32:59 2013 +1000
Revert "drm: mark context support as a legacy subsystem"
v2: remove returns from void function, and formatting (Daniel Vetter)
v3:
- s/Nova/nouveau/ in the commit message, and add references to the
previous attempts
- drop the part touching the drm hw lock, that should be a separate
patch.
Signed-off-by: Peter Antoine <peter.antoine@intel.com> (v2)
Cc: Peter Antoine <peter.antoine@intel.com> (v2)
Reviewed-by: Peter Antoine <peter.antoine@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Rodriguez [Thu, 2 May 2019 19:31:57 +0000 (15:31 -0400)]
drm: add non-desktop quirk for Valve HMDs
commit
30d62d4453e49f85dd17b2ba60bbb68b6593dba0 upstream.
Add vendor/product pairs for the Valve Index HMDs.
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: <stable@vger.kernel.org> # v4.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190502193157.15692-1-andresx7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helen Koike [Mon, 3 Jun 2019 16:56:08 +0000 (13:56 -0300)]
drm/msm: fix fb references in async update
commit
474d952b4870cfbdc55d3498f4d498775fe77e81 upstream.
Async update callbacks are expected to set the old_fb in the new_state
so prepare/cleanup framebuffers are balanced.
Cc: <stable@vger.kernel.org> # v4.14+
Fixes:
224a4c970987 ("drm/msm: update cursors asynchronously through atomic")
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-4-helen.koike@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrik Jakobsson [Tue, 16 Apr 2019 11:46:07 +0000 (13:46 +0200)]
drm/gma500/cdv: Check vbt config bits when detecting lvds panels
commit
7c420636860a719049fae9403e2c87804f53bdde upstream.
Some machines have an lvds child device in vbt even though a panel is
not attached. To make detection more reliable we now also check the lvds
config bits available in the vbt.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1665766
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190416114607.1072-1-patrik.r.jakobsson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 15 May 2019 09:33:22 +0000 (12:33 +0300)]
test_firmware: Use correct snprintf() limit
commit
bd17cc5a20ae9aaa3ed775f360b75ff93cd66a1d upstream.
The limit here is supposed to be how much of the page is left, but it's
just using PAGE_SIZE as the limit.
The other thing to remember is that snprintf() returns the number of
bytes which would have been copied if we had had enough room. So that
means that if we run out of space then this code would end up passing a
negative value as the limit and the kernel would print an error message.
I have change the code to use scnprintf() which returns the number of
bytes that were successfully printed (not counting the NUL terminator).
Fixes:
c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 7 May 2019 08:36:34 +0000 (11:36 +0300)]
genwqe: Prevent an integer overflow in the ioctl
commit
110080cea0d0e4dfdb0b536e7f8a5633ead6a781 upstream.
There are a couple potential integer overflows here.
round_up(m->size + (m->addr & ~PAGE_MASK), PAGE_SIZE);
The first thing is that the "m->size + (...)" addition could overflow,
and the second is that round_up() overflows to zero if the result is
within PAGE_SIZE of the type max.
In this code, the "m->size" variable is an u64 but we're saving the
result in "map_size" which is an unsigned long and genwqe_user_vmap()
takes an unsigned long as well. So I have used ULONG_MAX as the upper
bound. From a practical perspective unsigned long is fine/better than
trying to change all the types to u64.
Fixes:
eaf4722d4645 ("GenWQE Character device and DDCB queue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 9 Jun 2019 10:02:32 +0000 (12:02 +0200)]
Revert "MIPS: perf: ath79: Fix perfcount IRQ assignment"
This reverts commit
ca8648816e3dcc8dadba0e79a034f61c85eb206d which is
commit
a1e8783db8e0d58891681bc1e6d9ada66eae8e20 upstream.
Petr writes:
Karl has reported to me today, that he's experiencing weird
reboot hang on his devices with 4.9.180 kernel and that he has
bisected it down to my backported patch.
I would like to kindly ask you for removal of this patch. This
patch should be reverted from all stable kernels up to 5.1,
because perf counters were not broken on those kernels, and this
patch won't work on the ath79 legacy IRQ code anyway, it needs
new irqchip driver which was enabled on ath79 with commit
51fa4f8912c0 ("MIPS: ath79: drop legacy IRQ code").
Reported-by: Petr Štetiar <ynezz@true.cz>
Cc: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Cc: John Crispin <john@phrozen.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Tue, 28 May 2019 17:21:26 +0000 (17:21 +0000)]
MIPS: pistachio: Build uImage.gz by default
commit
e4f2d1af7163becb181419af9dece9206001e0a6 upstream.
The pistachio platform uses the U-Boot bootloader & generally boots a
kernel in the uImage format. As such it's useful to build one when
building the kernel, but to do so currently requires the user to
manually specify a uImage target on the make command line.
Make uImage.gz the pistachio platform's default build target, so that
the default is to build a kernel image that we can actually boot on a
board such as the MIPS Creator Ci40.
Marked for stable backport as far as v4.1 where pistachio support was
introduced. This is primarily useful for CI systems such as kernelci.org
which will benefit from us building a suitable image which can then be
booted as part of automated testing, extending our test coverage to the
affected stable branches.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
URL: https://groups.io/g/kernelci/message/388
Cc: stable@vger.kernel.org # v4.1+
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paul Burton [Tue, 28 May 2019 17:05:03 +0000 (17:05 +0000)]
MIPS: Bounds check virt_addr_valid
commit
074a1e1167afd82c26f6d03a9a8b997d564bb241 upstream.
The virt_addr_valid() function is meant to return true iff
virt_to_page() will return a valid struct page reference. This is true
iff the address provided is found within the unmapped address range
between PAGE_OFFSET & MAP_BASE, but we don't currently check for that
condition. Instead we simply mask the address to obtain what will be a
physical address if the virtual address is indeed in the desired range,
shift it to form a PFN & then call pfn_valid(). This can incorrectly
return true if called with a virtual address which, after masking,
happens to form a physical address corresponding to a valid PFN.
For example we may vmalloc an address in the kernel mapped region
starting a MAP_BASE & obtain the virtual address:
addr = 0xc000000000002000
When masked by virt_to_phys(), which uses __pa() & in turn CPHYSADDR(),
we obtain the following (bogus) physical address:
addr = 0x2000
In a common system with PHYS_OFFSET=0 this will correspond to a valid
struct page which should really be accessed by virtual address
PAGE_OFFSET+0x2000, causing virt_addr_valid() to incorrectly return 1
indicating that the original address corresponds to a struct page.
This is equivalent to the ARM64 change made in commit
ca219452c6b8
("arm64: Correctly bounds check virt_addr_valid").
This fixes fallout when hardened usercopy is enabled caused by the
related commit
517e1fbeb65f ("mm/usercopy: Drop extra
is_vmalloc_or_module() check") which removed a check for the vmalloc
range that was present from the introduction of the hardened usercopy
feature.
Signed-off-by: Paul Burton <paul.burton@mips.com>
References:
ca219452c6b8 ("arm64: Correctly bounds check virt_addr_valid")
References:
517e1fbeb65f ("mm/usercopy: Drop extra is_vmalloc_or_module() check")
Reported-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: YunQiang Su <ysu@wavecomp.com>
URL: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=929366
Cc: stable@vger.kernel.org # v4.12+
Cc: linux-mips@vger.kernel.org
Cc: Yunqiang Su <ysu@wavecomp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Pau Monne [Fri, 3 May 2019 15:04:01 +0000 (17:04 +0200)]
xen-blkfront: switch kcalloc to kvcalloc for large array allocation
commit
1d5c76e66433382a1e170d1d5845bb0fed7467aa upstream.
There's no reason to request physically contiguous memory for those
allocations.
[boris: added CC to stable]
Cc: stable@vger.kernel.org
Reported-by: Ian Jackson <ian.jackson@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gerald Schaefer [Mon, 27 May 2019 16:40:19 +0000 (18:40 +0200)]
s390/mm: fix address space detection in exception handling
commit
962f0af83c239c0aef05639631e871c874b00f99 upstream.
Commit
0aaba41b58bc ("s390: remove all code using the access register
mode") removed access register mode from the kernel, and also from the
address space detection logic. However, user space could still switch
to access register mode (trans_exc_code == 1), and exceptions in that
mode would not be correctly assigned.
Fix this by adding a check for trans_exc_code == 1 to get_fault_type(),
and remove the wrong comment line before that function.
Fixes:
0aaba41b58bc ("s390: remove all code using the access register mode")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Robert Hancock [Tue, 4 Jun 2019 21:55:51 +0000 (15:55 -0600)]
i2c: xiic: Add max_read_len quirk
commit
49b809586730a77b57ce620b2f9689de765d790b upstream.
This driver does not support reading more than 255 bytes at once because
the register for storing the number of bytes to read is only 8 bits. Add
a max_read_len quirk to enforce this.
This was found when using this driver with the SFP driver, which was
previously reading all 256 bytes in the SFP EEPROM in one transaction.
This caused a bunch of hard-to-debug errors in the xiic driver since the
driver/logic was treating the number of bytes to read as zero.
Rejecting transactions that aren't supported at least allows the problem
to be diagnosed more easily.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jann Horn [Sun, 2 Jun 2019 01:15:58 +0000 (03:15 +0200)]
x86/insn-eval: Fix use-after-free access to LDT entry
commit
de9f869616dd95e95c00bdd6b0fcd3421e8a4323 upstream.
get_desc() computes a pointer into the LDT while holding a lock that
protects the LDT from being freed, but then drops the lock and returns the
(now potentially dangling) pointer to its caller.
Fix it by giving the caller a copy of the LDT entry instead.
Fixes:
670f928ba09b ("x86/insn-eval: Add utility function to get segment descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Kosina [Wed, 29 May 2019 22:09:39 +0000 (00:09 +0200)]
x86/power: Fix 'nosmt' vs hibernation triple fault during resume
commit
ec527c318036a65a083ef68d8ba95789d2212246 upstream.
As explained in
0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
we always, no matter what, have to bring up x86 HT siblings during boot at
least once in order to avoid first MCE bringing the system to its knees.
That means that whenever 'nosmt' is supplied on the kernel command-line,
all the HT siblings are as a result sitting in mwait or cpudile after
going through the online-offline cycle at least once.
This causes a serious issue though when a kernel, which saw 'nosmt' on its
commandline, is going to perform resume from hibernation: if the resume
from the hibernated image is successful, cr3 is flipped in order to point
to the address space of the kernel that is being resumed, which in turn
means that all the HT siblings are all of a sudden mwaiting on address
which is no longer valid.
That results in triple fault shortly after cr3 is switched, and machine
reboots.
Fix this by always waking up all the SMT siblings before initiating the
'restore from hibernation' process; this guarantees that all the HT
siblings will be properly carried over to the resumed kernel waiting in
resume_play_dead(), and acted upon accordingly afterwards, based on the
target kernel configuration.
Symmetricaly, the resumed kernel has to push the SMT siblings to mwait
again in case it has SMT disabled; this means it has to online all
the siblings when resuming (so that they come out of hlt) and offline
them again to let them reach mwait.
Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Debugged-by: Thomas Gleixner <tglx@linutronix.de>
Fixes:
0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Fri, 31 May 2019 06:37:29 +0000 (23:37 -0700)]
pstore/ram: Run without kernel crash dump region
commit
8880fa32c557600f5f624084152668ed3c2ea51e upstream.
The ram pstore backend has always had the crash dumper frontend enabled
unconditionally. However, it was possible to effectively disable it
by setting a record_size=0. All the machinery would run (storing dumps
to the temporary crash buffer), but 0 bytes would ultimately get stored
due to there being no przs allocated for dumps. Commit
89d328f637b9
("pstore/ram: Correctly calculate usable PRZ bytes"), however, assumed
that there would always be at least one allocated dprz for calculating
the size of the temporary crash buffer. This was, of course, not the
case when record_size=0, and would lead to a NULL deref trying to find
the dprz buffer size:
BUG: unable to handle kernel NULL pointer dereference at (null)
...
IP: ramoops_probe+0x285/0x37e (fs/pstore/ram.c:808)
cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;
Instead, we need to only enable the frontends based on the success of the
prz initialization and only take the needed actions when those zones are
available. (This also fixes a possible error in detecting if the ftrace
frontend should be enabled.)
Reported-and-tested-by: Yaro Slav <yaro330@gmail.com>
Fixes:
89d328f637b9 ("pstore/ram: Correctly calculate usable PRZ bytes")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pi-Hsun Shih [Mon, 20 May 2019 06:51:19 +0000 (14:51 +0800)]
pstore: Set tfm to NULL on free_buf_for_compression
commit
a9fb94a99bb515d8720ba8440ce3aba84aec80f8 upstream.
Set tfm to NULL on free_buf_for_compression() after crypto_free_comp().
This avoid a use-after-free when allocate_buf_for_compression()
and free_buf_for_compression() are called twice. Although
free_buf_for_compression() freed the tfm, allocate_buf_for_compression()
won't reinitialize the tfm since the tfm pointer is not NULL.
Fixes:
95047b0519c1 ("pstore: Refactor compression initialization")
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Fri, 30 Nov 2018 22:36:58 +0000 (14:36 -0800)]
pstore: Convert buf_lock to semaphore
commit
ea84b580b95521644429cc6748b6c2bf27c8b0f3 upstream.
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<
ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes:
21b3ddd39fee ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Thu, 1 Nov 2018 21:08:07 +0000 (14:08 -0700)]
pstore: Remove needless lock during console writes
commit
b77fa617a2ff4d6beccad3d3d4b3a1f2d10368aa upstream.
Since the console writer does not use the preallocated crash dump buffer
any more, there is no reason to perform locking around it.
Fixes:
70ad35db3321 ("pstore: Convert console write to use ->write_buf")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Mon, 27 May 2019 09:42:07 +0000 (11:42 +0200)]
fuse: fallocate: fix return with locked inode
commit
35d6fcbb7c3e296a52136347346a698a35af3fda upstream.
Do the proper cleanup in case the size check fails.
Tested with xfstests:generic/228
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes:
0cbade024ba5 ("fuse: honor RLIMIT_FSIZE in fuse_file_fallocate")
Cc: Liu Bo <bo.liu@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yihao Wu [Mon, 13 May 2019 06:58:22 +0000 (14:58 +0800)]
NFSv4.1: Fix bug only first CB_NOTIFY_LOCK is handled
commit
ba851a39c9703f09684a541885ed176f8fb7c868 upstream.
When a waiter is waked by CB_NOTIFY_LOCK, it will retry
nfs4_proc_setlk(). The waiter may fail to nfs4_proc_setlk() and sleep
again. However, the waiter is already removed from clp->cl_lock_waitq
when handling CB_NOTIFY_LOCK in nfs4_wake_lock_waiter(). So any
subsequent CB_NOTIFY_LOCK won't wake this waiter anymore. We should
put the waiter back to clp->cl_lock_waitq before retrying.
Cc: stable@vger.kernel.org #4.9+
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yihao Wu [Tue, 21 May 2019 17:57:10 +0000 (01:57 +0800)]
NFSv4.1: Again fix a race where CB_NOTIFY_LOCK fails to wake a waiter
commit
52b042ab9948cc367b61f9ca9c18603aa7813c3a upstream.
Commit
b7dbcc0e433f "NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter"
found this bug. However it didn't fix it.
This commit replaces schedule_timeout() with wait_woken() and
default_wake_function() with woken_wake_function() in function
nfs4_retry_setlk() and nfs4_wake_lock_waiter(). wait_woken() uses
memory barriers in its implementation to avoid potential race condition
when putting a process into sleeping state and then waking it up.
Fixes:
a1d617d8f134 ("nfs: allow blocking locks to be awoken by lock callbacks")
Cc: stable@vger.kernel.org #4.9+
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John David Anglin [Tue, 28 May 2019 00:15:14 +0000 (20:15 -0400)]
parisc: Use implicit space register selection for loading the coherence index of I/O pdirs
commit
63923d2c3800919774f5c651d503d1dd2adaddd5 upstream.
We only support I/O to kernel space. Using %sr1 to load the coherence
index may be racy unless interrupts are disabled. This patch changes the
code used to load the coherence index to use implicit space register
selection. This saves one instruction and eliminates the race.
Tested on rp3440, c8000 and c3750.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Mon, 3 Jun 2019 20:26:20 +0000 (13:26 -0700)]
rcu: locking and unlocking need to always be at least barriers
commit
66be4e66a7f422128748e3c3ef6ee72b20a6197b upstream.
Herbert Xu pointed out that commit
bb73c52bad36 ("rcu: Don't disable
preemption for Tiny and Tree RCU readers") was incorrect in making the
preempt_disable/enable() be conditional on CONFIG_PREEMPT_COUNT.
If CONFIG_PREEMPT_COUNT isn't enabled, the preemption enable/disable is
a no-op, but still is a compiler barrier.
And RCU locking still _needs_ that compiler barrier.
It is simply fundamentally not true that RCU locking would be a complete
no-op: we still need to guarantee (for example) that things that can
trap and cause preemption cannot migrate into the RCU locked region.
The way we do that is by making it a barrier.
See for example commit
386afc91144b ("spinlocks and preemption points
need to be at least compiler barriers") from back in 2013 that had
similar issues with spinlocks that become no-ops on UP: they must still
constrain the compiler from moving other operations into the critical
region.
Now, it is true that a lot of RCU operations already use READ_ONCE() and
WRITE_ONCE() (which in practice likely would never be re-ordered wrt
anything remotely interesting), but it is also true that that is not
globally the case, and that it's not even necessarily always possible
(ie bitfields etc).
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes:
bb73c52bad36 ("rcu: Don't disable preemption for Tiny and Tree RCU readers")
Cc: stable@kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emil Lenngren [Thu, 20 Dec 2018 12:46:58 +0000 (13:46 +0100)]
mtd: spinand: macronix: Fix ECC Status Read
commit
f4cb4d7b46f6409382fd981eec9556e1f3c1dc5d upstream.
The datasheet specifies the upper four bits are reserved.
Testing on real hardware shows that these bits can indeed be nonzero.
Signed-off-by: Emil Lenngren <emil.lenngren@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olivier Matz [Thu, 6 Jun 2019 07:15:19 +0000 (09:15 +0200)]
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
[ Upstream commit
b9aa52c4cb457e7416cc0c95f475e72ef4a61336 ]
The following code returns EFAULT (Bad address):
s = socket(AF_INET6, SOCK_RAW, IPPROTO_ICMPV6);
setsockopt(s, SOL_IPV6, IPV6_HDRINCL, 1);
sendto(ipv6_icmp6_packet, addr); /* returns -1, errno = EFAULT */
The IPv4 equivalent code works. A workaround is to use IPPROTO_RAW
instead of IPPROTO_ICMPV6.
The failure happens because 2 bytes are eaten from the msghdr by
rawv6_probe_proto_opt() starting from commit
19e3c66b52ca ("ipv6
equivalent of "ipv4: Avoid reading user iov twice after
raw_probe_proto_opt""), but at that time it was not a problem because
IPV6_HDRINCL was not yet introduced.
Only eat these 2 bytes if hdrincl == 0.
Fixes:
715f504b1189 ("ipv6: add IPV6_HDRINCL option for raw sockets")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Olivier Matz [Thu, 6 Jun 2019 07:15:18 +0000 (09:15 +0200)]
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
[ Upstream commit
59e3e4b52663a9d97efbce7307f62e4bc5c9ce91 ]
As it was done in commit
8f659a03a0ba ("net: ipv4: fix for a race
condition in raw_sendmsg") and commit
20b50d79974e ("net: ipv4: emulate
READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()") for ipv4, copy the
value of inet->hdrincl in a local variable, to avoid introducing a race
condition in the next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hangbin Liu [Wed, 5 Jun 2019 04:27:14 +0000 (12:27 +0800)]
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
[ Upstream commit
4970b42d5c362bf873982db7d93245c5281e58f4 ]
This reverts commit
e9919a24d3022f72bcadc407e73a6ef17093a849.
Nathan reported the new behaviour breaks Android, as Android just add
new rules and delete old ones.
If we return 0 without adding dup rules, Android will remove the new
added rules and causing system to soft-reboot.
Fixes:
e9919a24d302 ("fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Yaro Slav <yaro330@gmail.com>
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Thu, 6 Jun 2019 13:45:03 +0000 (15:45 +0200)]
pktgen: do not sleep with the thread lock held.
[ Upstream commit
720f1de4021f09898b8c8443f3b3e995991b6e3a ]
Currently, the process issuing a "start" command on the pktgen procfs
interface, acquires the pktgen thread lock and never release it, until
all pktgen threads are completed. The above can blocks indefinitely any
other pktgen command and any (even unrelated) netdevice removal - as
the pktgen netdev notifier acquires the same lock.
The issue is demonstrated by the following script, reported by Matteo:
ip -b - <<'EOF'
link add type dummy
link add type veth
link set dummy0 up
EOF
modprobe pktgen
echo reset >/proc/net/pktgen/pgctrl
{
echo rem_device_all
echo add_device dummy0
} >/proc/net/pktgen/kpktgend_0
echo count 0 >/proc/net/pktgen/dummy0
echo start >/proc/net/pktgen/pgctrl &
sleep 1
rmmod veth
Fix the above releasing the thread lock around the sleep call.
Additionally we must prevent racing with forcefull rmmod - as the
thread lock no more protects from them. Instead, acquire a self-reference
before waiting for any thread. As a side effect, running
rmmod pktgen
while some thread is running now fails with "module in use" error,
before this patch such command hanged indefinitely.
Note: the issue predates the commit reported in the fixes tag, but
this fix can't be applied before the mentioned commit.
v1 -> v2:
- no need to check for thread existence after flipping the lock,
pktgen threads are freed only at net exit time
-
Fixes:
6146e6a43b35 ("[PKTGEN]: Removes thread_{un,}lock() macros.")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Fri, 31 May 2019 16:37:23 +0000 (12:37 -0400)]
packet: unconditionally free po->rollover
[ Upstream commit
afa0925c6fcc6a8f610e996ca09bc3215048033c ]
Rollover used to use a complex RCU mechanism for assignment, which had
a race condition. The below patch fixed the bug and greatly simplified
the logic.
The feature depends on fanout, but the state is private to the socket.
Fanout_release returns f only when the last member leaves and the
fanout struct is to be freed.
Destroy rollover unconditionally, regardless of fanout state.
Fixes:
57f015f5eccf2 ("packet: fix crash in fanout_demux_rollover()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jakub Kicinski [Tue, 4 Jun 2019 19:00:12 +0000 (12:00 -0700)]
net/tls: replace the sleeping lock around RX resync with a bit lock
[ Upstream commit
e52972c11d6b1262964db96d65934196db621685 ]
Commit
38030d7cb779 ("net/tls: avoid NULL-deref on resync during device removal")
tried to fix a potential NULL-dereference by taking the
context rwsem. Unfortunately the RX resync may get called
from soft IRQ, so we can't use the rwsem to protect from
the device disappearing. Because we are guaranteed there
can be only one resync at a time (it's called from strparser)
use a bit to indicate resync is busy and make device
removal wait for the bit to get cleared.
Note that there is a leftover "flags" field in struct
tls_context already.
Fixes:
4799ac81e52a ("tls: Add rx inline crypto offload")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Russell King [Sun, 2 Jun 2019 14:13:00 +0000 (15:13 +0100)]
net: sfp: read eeprom in maximum 16 byte increments
[ Upstream commit
28e74a7cfd6403f0d1c0f8b10b45d6fae37b227e ]
Some SFP modules do not like reads longer than 16 bytes, so read the
EEPROM in chunks of 16 bytes at a time. This behaviour is not specified
in the SFP MSAs, which specifies:
"The serial interface uses the 2-wire serial CMOS E2PROM protocol
defined for the ATMEL AT24C01A/02/04 family of components."
and
"As long as the SFP+ receives an acknowledge, it shall serially clock
out sequential data words. The sequence is terminated when the host
responds with a NACK and a STOP instead of an acknowledge."
We must avoid breaking a read across a 16-bit quantity in the diagnostic
page, thankfully all 16-bit quantities in that page are naturally
aligned.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhu Yanjun [Thu, 6 Jun 2019 08:00:03 +0000 (04:00 -0400)]
net: rds: fix memory leak in rds_ib_flush_mr_pool
[ Upstream commit
85cb928787eab6a2f4ca9d2a798b6f3bed53ced1 ]
When the following tests last for several hours, the problem will occur.
Server:
rds-stress -r 1.1.1.16 -D 1M
Client:
rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M -T 30
The following will occur.
"
Starting up....
tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu
%
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00
"
>From vmcore, we can find that clean_list is NULL.
>From the source code, rds_mr_flushd calls rds_ib_mr_pool_flush_worker.
Then rds_ib_mr_pool_flush_worker calls
"
rds_ib_flush_mr_pool(pool, 0, NULL);
"
Then in function
"
int rds_ib_flush_mr_pool(struct rds_ib_mr_pool *pool,
int free_all, struct rds_ib_mr **ibmr_ret)
"
ibmr_ret is NULL.
In the source code,
"
...
list_to_llist_nodes(pool, &unmap_list, &clean_nodes, &clean_tail);
if (ibmr_ret)
*ibmr_ret = llist_entry(clean_nodes, struct rds_ib_mr, llnode);
/* more than one entry in llist nodes */
if (clean_nodes->next)
llist_add_batch(clean_nodes->next, clean_tail, &pool->clean_list);
...
"
When ibmr_ret is NULL, llist_entry is not executed. clean_nodes->next
instead of clean_nodes is added in clean_list.
So clean_nodes is discarded. It can not be used again.
The workqueue is executed periodically. So more and more clean_nodes are
discarded. Finally the clean_list is NULL.
Then this problem will occur.
Fixes:
1bc144b62524 ("net, rds, Replace xlist in net/rds/xlist.h with llist")
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxime Chevallier [Thu, 6 Jun 2019 08:42:56 +0000 (10:42 +0200)]
net: mvpp2: Use strscpy to handle stat strings
[ Upstream commit
d37acd5aa99c57505b64913e0e2624ec3daed8c5 ]
Use a safe strscpy call to copy the ethtool stat strings into the
relevant buffers, instead of a memcpy that will be accessing
out-of-bound data.
Fixes:
118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erez Alfasi [Mon, 20 May 2019 14:42:52 +0000 (17:42 +0300)]
net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query
[ Upstream commit
135dd9594f127c8a82d141c3c8430e9e2143216a ]
Querying EEPROM high pages data for SFP module is currently
not supported by our driver but is still tried, resulting in
invalid FW queries.
Set the EEPROM ethtool data length to 256 for SFP module to
limit the reading for page 0 only and prevent invalid FW queries.
Fixes:
7202da8b7f71 ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Khoronzhuk [Fri, 31 May 2019 13:47:25 +0000 (16:47 +0300)]
net: ethernet: ti: cpsw_ethtool: fix ethtool ring param set
[ Upstream commit
09faf5a7d7c0bcb07faba072f611937af9dd5788 ]
Fix ability to set RX descriptor number, the reason - initially
"tx_max_pending" was set incorrectly, but the issue appears after
adding sanity check, so fix is for "sanity" patch.
Fixes:
37e2d99b59c476 ("ethtool: Ensure new ring parameters are within bounds during SRINGPARAM")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Thu, 2 May 2019 01:18:42 +0000 (18:18 -0700)]
neighbor: Call __ipv4_neigh_lookup_noref in neigh_xmit
[ Upstream commit
4b2a2bfeb3f056461a90bd621e8bd7d03fa47f60 ]
Commit
cd9ff4de0107 changed the key for IFF_POINTOPOINT devices to
INADDR_ANY but neigh_xmit which is used for MPLS encapsulations was not
updated to use the altered key. The result is that every packet Tx does
a lookup on the gateway address which does not find an entry, a new one
is created only to find the existing one in the table right before the
insert since arp_constructor was updated to reset the primary key. This
is seen in the allocs and destroys counters:
ip -s -4 ntable show | head -10 | grep alloc
which increase for each packet showing the unnecessary overhread.
Fix by having neigh_xmit use __ipv4_neigh_lookup_noref for NEIGH_ARP_TABLE.
Fixes:
cd9ff4de0107 ("ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY")
Reported-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Sun, 2 Jun 2019 11:10:46 +0000 (19:10 +0800)]
ipv6: fix the check before getting the cookie in rt6_get_cookie
[ Upstream commit
b7999b07726c16974ba9ca3bb9fe98ecbec5f81c ]
In Jianlin's testing, netperf was broken with 'Connection reset by peer',
as the cookie check failed in rt6_check() and ip6_dst_check() always
returned NULL.
It's caused by Commit
93531c674315 ("net/ipv6: separate handling of FIB
entries from dst based routes"), where the cookie can be got only when
'c1'(see below) for setting dst_cookie whereas rt6_check() is called
when !'c1' for checking dst_cookie, as we can see in ip6_dst_check().
Since in ip6_dst_check() both rt6_dst_from_check() (c1) and rt6_check()
(!c1) will check the 'from' cookie, this patch is to remove the c1 check
in rt6_get_cookie(), so that the dst_cookie can always be set properly.
c1:
(rt->rt6i_flags & RTF_PCPU || unlikely(!list_empty(&rt->rt6i_uncached)))
Fixes:
93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Sun, 2 Jun 2019 11:10:24 +0000 (19:10 +0800)]
ipv4: not do cache for local delivery if bc_forwarding is enabled
[ Upstream commit
0a90478b93a46bdcd56ba33c37566a993e455d54 ]
With the topo:
h1 ---| rp1 |
| route rp3 |--- h3 (192.168.200.1)
h2 ---| rp2 |
If rp1 bc_forwarding is set while rp2 bc_forwarding is not, after
doing "ping 192.168.200.255" on h1, then ping 192.168.200.255 on
h2, and the packets can still be forwared.
This issue was caused by the input route cache. It should only do
the cache for either bc forwarding or local delivery. Otherwise,
local delivery can use the route cache for bc forwarding of other
interfaces.
This patch is to fix it by not doing cache for local delivery if
all.bc_forwarding is enabled.
Note that we don't fix it by checking route cache local flag after
rt_cache_valid() in "local_input:" and "ip_mkroute_input", as the
common route code shouldn't be touched for bc_forwarding.
Fixes:
5cbf777cfdf6 ("route: add support for directed broadcast forwarding")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neil Horman [Mon, 3 Jun 2019 20:32:59 +0000 (16:32 -0400)]
Fix memory leak in sctp_process_init
[ Upstream commit
0a8dd9f67cd0da7dc284f48b032ce00db1a68791 ]
syzbot found the following leak in sctp_process_init
BUG: memory leak
unreferenced object 0xffff88810ef68400 (size 1024):
comm "syz-executor273", pid 7046, jiffies
4294945598 (age 28.770s)
hex dump (first 32 bytes):
1d de 28 8d de 0b 1b e3 b5 c2 f9 68 fd 1a 97 25 ..(........h...%
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000a02cebbd>] kmemleak_alloc_recursive include/linux/kmemleak.h:55
[inline]
[<
00000000a02cebbd>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<
00000000a02cebbd>] slab_alloc mm/slab.c:3326 [inline]
[<
00000000a02cebbd>] __do_kmalloc mm/slab.c:3658 [inline]
[<
00000000a02cebbd>] __kmalloc_track_caller+0x15d/0x2c0 mm/slab.c:3675
[<
000000009e6245e6>] kmemdup+0x27/0x60 mm/util.c:119
[<
00000000dfdc5d2d>] kmemdup include/linux/string.h:432 [inline]
[<
00000000dfdc5d2d>] sctp_process_init+0xa7e/0xc20
net/sctp/sm_make_chunk.c:2437
[<
00000000b58b62f8>] sctp_cmd_process_init net/sctp/sm_sideeffect.c:682
[inline]
[<
00000000b58b62f8>] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1384
[inline]
[<
00000000b58b62f8>] sctp_side_effects net/sctp/sm_sideeffect.c:1194
[inline]
[<
00000000b58b62f8>] sctp_do_sm+0xbdc/0x1d60 net/sctp/sm_sideeffect.c:1165
[<
0000000044e11f96>] sctp_assoc_bh_rcv+0x13c/0x200
net/sctp/associola.c:1074
[<
00000000ec43804d>] sctp_inq_push+0x7f/0xb0 net/sctp/inqueue.c:95
[<
00000000726aa954>] sctp_backlog_rcv+0x5e/0x2a0 net/sctp/input.c:354
[<
00000000d9e249a8>] sk_backlog_rcv include/net/sock.h:950 [inline]
[<
00000000d9e249a8>] __release_sock+0xab/0x110 net/core/sock.c:2418
[<
00000000acae44fa>] release_sock+0x37/0xd0 net/core/sock.c:2934
[<
00000000963cc9ae>] sctp_sendmsg+0x2c0/0x990 net/sctp/socket.c:2122
[<
00000000a7fc7565>] inet_sendmsg+0x64/0x120 net/ipv4/af_inet.c:802
[<
00000000b732cbd3>] sock_sendmsg_nosec net/socket.c:652 [inline]
[<
00000000b732cbd3>] sock_sendmsg+0x54/0x70 net/socket.c:671
[<
00000000274c57ab>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2292
[<
000000008252aedb>] __sys_sendmsg+0x80/0xf0 net/socket.c:2330
[<
00000000f7bf23d1>] __do_sys_sendmsg net/socket.c:2339 [inline]
[<
00000000f7bf23d1>] __se_sys_sendmsg net/socket.c:2337 [inline]
[<
00000000f7bf23d1>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2337
[<
00000000a8b4131f>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:3
The problem was that the peer.cookie value points to an skb allocated
area on the first pass through this function, at which point it is
overwritten with a heap allocated value, but in certain cases, where a
COOKIE_ECHO chunk is included in the packet, a second pass through
sctp_process_init is made, where the cookie value is re-allocated,
leaking the first allocation.
Fix is to always allocate the cookie value, and free it when we are done
using it.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com
CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vivien Didelot [Mon, 3 Jun 2019 20:57:13 +0000 (16:57 -0400)]
ethtool: fix potential userspace buffer overflow
[ Upstream commit
0ee4e76937d69128a6a66861ba393ebdc2ffc8a2 ]
ethtool_get_regs() allocates a buffer of size ops->get_regs_len(),
and pass it to the kernel driver via ops->get_regs() for filling.
There is no restriction about what the kernel drivers can or cannot do
with the open ethtool_regs structure. They usually set regs->version
and ignore regs->len or set it to the same size as ops->get_regs_len().
But if userspace allocates a smaller buffer for the registers dump,
we would cause a userspace buffer overflow in the final copy_to_user()
call, which uses the regs.len value potentially reset by the driver.
To fix this, make this case obvious and store regs.len before calling
ops->get_regs(), to only copy as much data as requested by userspace,
up to the value returned by ops->get_regs_len().
While at it, remove the redundant check for non-null regbuf.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 9 Jun 2019 07:17:25 +0000 (09:17 +0200)]
Linux 4.19.49
Nadav Amit [Mon, 4 Jun 2018 13:47:13 +0000 (09:47 -0400)]
media: uvcvideo: Fix uvc_alloc_entity() allocation alignment
commit
89dd34caf73e28018c58cd193751e41b1f8bdc56 upstream.
The use of ALIGN() in uvc_alloc_entity() is incorrect, since the size of
(entity->pads) is not a power of two. As a stop-gap, until a better
solution is adapted, use roundup() instead.
Found by a static assertion. Compile-tested only.
Fixes:
4ffc2d89f38a ("uvcvideo: Register subdevices for each entity")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Rowand [Sat, 13 Oct 2018 02:21:16 +0000 (19:21 -0700)]
of: overlay: set node fields from properties when add new overlay node
commit
f96278810150fc39085d1872e5b39ea06366d03e upstream.
Overlay nodes added by add_changeset_node() do not have the node
fields name, phandle, and type set.
The node passed to __of_attach_node() when the add node changeset
entry is processed does not contain any properties. The node's
properties are located in add property changeset entries that will
be processed after the add node changeset is applied.
Set the node's fields in the node contained in the add node
changeset entry and do not set them to incorrect values in
add_changeset_node().
A visible symptom that is fixed by this patch is the names of nodes
added by overlays that have an entry in /sys/bus/platform/drivers/*/
will contain the unit-address but the node-name will be <NULL>, for
example, "
fc4ab000.<NULL>". After applying the patch the name, in
this example, for node restart@
fc4ab000 is "
fc4ab000.restart".
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Cc: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Rowand [Fri, 5 Oct 2018 03:32:04 +0000 (20:32 -0700)]
of: overlay: validate overlay properties #address-cells and #size-cells
commit
6f75118800acf77f8ad6afec61ca1b2349ade371 upstream.
If overlay properties #address-cells or #size-cells are already in
the live devicetree for any given node, then the values in the
overlay must match the values in the live tree.
If the properties are already in the live tree then there is no
need to create a changeset entry to add them since they must
have the same value. This reduces the memory used by the
changeset and eliminates a possible memory leak.
Tested-by: Alan Tull <atull@kernel.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Thu, 6 Jun 2019 17:41:25 +0000 (10:41 -0700)]
scsi: lpfc: Fix backport of
faf5a744f4f8 ("scsi: lpfc: avoid uninitialized variable warning")
Prior to commit
4c47efc140fa ("scsi: lpfc: Move SCSI and NVME Stats to
hardware queue structures") upstream, we allocated a cstat structure in
lpfc_nvme_create_localport. When commit
faf5a744f4f8 ("scsi: lpfc: avoid
uninitialized variable warning") was backported, it was placed after the
allocation so we leaked memory whenever this function was called and
that conditional was true (so whenever CONFIG_NVME_FC is disabled).
Move the IS_ENABLED if statement above the allocation since it is not
needed when the condition is true.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nadav Amit [Fri, 26 Apr 2019 00:11:30 +0000 (17:11 -0700)]
x86/kprobes: Set instruction page as executable
[ Upstream commit
7298e24f904224fa79eb8fd7e0fbd78950ccf2db ]
Set the page as executable after allocation. This patch is a
preparatory patch for a following patch that makes module allocated
pages non-executable.
While at it, do some small cleanup of what appears to be unnecessary
masking.
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190426001143.4983-11-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nadav Amit [Fri, 26 Apr 2019 00:11:29 +0000 (17:11 -0700)]
x86/ftrace: Set trampoline pages as executable
[ Upstream commit
3c0dab44e22782359a0a706cbce72de99a22aa75 ]
Since alloc_module() will not set the pages as executable soon, set
ftrace trampoline pages as executable after they are allocated.
For the time being, do not change ftrace to use the text_poke()
interface. As a result, ftrace still breaks W^X.
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190426001143.4983-10-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Rostedt (VMware) [Sat, 8 Dec 2018 17:58:51 +0000 (12:58 -0500)]
x86/ftrace: Do not call function graph from dynamic trampolines
[ Upstream commit
d2a68c4effd821f0871d20368f76b609349c8a3b ]
Since commit
79922b8009c07 ("ftrace: Optimize function graph to be
called directly"), dynamic trampolines should not be calling the
function graph tracer at the end. If they do, it could cause the function
graph tracer to trace functions that it filtered out.
Right now it does not cause a problem because there's a test to check if
the function graph tracer is attached to the same function as the
function tracer, which for now is true. But the function graph tracer is
undergoing changes that can make this no longer true which will cause
the function graph tracer to trace other functions.
For example:
# cd /sys/kernel/tracing/
# echo do_IRQ > set_ftrace_filter
# mkdir instances/foo
# echo ip_rcv > instances/foo/set_ftrace_filter
# echo function_graph > current_tracer
# echo function > instances/foo/current_tracer
Would cause the function graph tracer to trace both do_IRQ and ip_rcv,
if the current tests change.
As the current tests prevent this from being a problem, this code does
not need to be backported. But it does make the code cleaner.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Todd Kjos [Wed, 5 Jun 2019 16:38:25 +0000 (09:38 -0700)]
binder: fix race between munmap() and direct reclaim
commit
5cec2d2e5839f9c0fec319c523a911e0a7fd299f upstream.
An munmap() on a binder device causes binder_vma_close() to be called
which clears the alloc->vma pointer.
If direct reclaim causes binder_alloc_free_page() to be called, there
is a race where alloc->vma is read into a local vma pointer and then
used later after the mm->mmap_sem is acquired. This can result in
calling zap_page_range() with an invalid vma which manifests as a
use-after-free in zap_page_range().
The fix is to check alloc->vma after acquiring the mmap_sem (which we
were acquiring anyway) and skip zap_page_range() if it has changed
to NULL.
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Todd Kjos <tkjos@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: stable <stable@vger.kernel.org> # 4.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Todd Kjos [Wed, 5 Jun 2019 16:38:24 +0000 (09:38 -0700)]
Revert "binder: fix handling of misaligned binder object"
This reverts commit
6bf7d3c5c0c5dad650bfc4345ed553c18b69d59e.
The commit message is for a different patch. Reverting and then adding
the same patch back with the correct commit message.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: stable <stable@vger.kernel.org> # 4.19
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 5 Jun 2019 18:40:30 +0000 (20:40 +0200)]
Revert "x86/build: Move _etext to actual end of .text"
This reverts commit
392bef709659abea614abfe53cf228e7a59876a4.
It seems to cause lots of problems when using the gold linker, and no
one really needs this at the moment, so just revert it from the stable
trees.
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Alec Ari <neotheuser@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miguel Ojeda [Sat, 19 Jan 2019 19:59:34 +0000 (20:59 +0100)]
include/linux/module.h: copy __init/__exit attrs to init/cleanup_module
commit
a6e60d84989fa0e91db7f236eda40453b0e44afa upstream.
The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target.
In particular, it triggers for all the init/cleanup_module
aliases in the kernel (defined by the module_init/exit macros),
ending up being very noisy.
These aliases point to the __init/__exit functions of a module,
which are defined as __cold (among other attributes). However,
the aliases themselves do not have the __cold attribute.
Since the compiler behaves differently when compiling a __cold
function as well as when compiling paths leading to calls
to __cold functions, the warning is trying to point out
the possibly-forgotten attribute in the alias.
In order to keep the warning enabled, we decided to silence
this case. Ideally, we would mark the aliases directly
as __init/__exit. However, there are currently around 132 modules
in the kernel which are missing __init/__exit in their init/cleanup
functions (either because they are missing, or for other reasons,
e.g. the functions being called from somewhere else); and
a section mismatch is a hard error.
A conservative alternative was to mark the aliases as __cold only.
However, since we would like to eventually enforce __init/__exit
to be always marked, we chose to use the new __copy function
attribute (introduced by GCC 9 as well to deal with this).
With it, we copy the attributes used by the target functions
into the aliases. This way, functions that were not marked
as __init/__exit won't have their aliases marked either,
and therefore there won't be a section mismatch.
Note that the warning would go away marking either the extern
declaration, the definition, or both. However, we only mark
the definition of the alias, since we do not want callers
(which only see the declaration) to be compiled as if the function
was __cold (and therefore the paths leading to those calls
would be assumed to be unlikely).
Link: https://lore.kernel.org/lkml/20190123173707.GA16603@gmail.com/
Link: https://lore.kernel.org/lkml/20190206175627.GA20399@gmail.com/
Suggested-by: Martin Sebor <msebor@gcc.gnu.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miguel Ojeda [Fri, 8 Feb 2019 22:51:05 +0000 (23:51 +0100)]
Compiler Attributes: add support for __copy (gcc >= 9)
commit
c0d9782f5b6d7157635ae2fd782a4b27d55a6013 upstream.
From the GCC manual:
copy
copy(function)
The copy attribute applies the set of attributes with which function
has been declared to the declaration of the function to which
the attribute is applied. The attribute is designed for libraries
that define aliases or function resolvers that are expected
to specify the same set of attributes as their targets. The copy
attribute can be used with functions, variables, or types. However,
the kind of symbol to which the attribute is applied (either
function or variable) must match the kind of symbol to which
the argument refers. The copy attribute copies only syntactic and
semantic attributes but not attributes that affect a symbol’s
linkage or visibility such as alias, visibility, or weak.
The deprecated attribute is also not copied.
https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html
The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target, e.g.:
void __cold f(void) {}
void __alias("f") g(void);
diagnoses:
warning: 'g' specifies less restrictive attribute than
its target 'f': 'cold' [-Wmissing-attributes]
Using __copy(f) we can copy the __cold attribute from f to g:
void __cold f(void) {}
void __copy(f) __alias("f") g(void);
This attribute is most useful to deal with situations where an alias
is declared but we don't know the exact attributes the target has.
For instance, in the kernel, the widely used module_init/exit macros
define the init/cleanup_module aliases, but those cannot be marked
always as __init/__exit since some modules do not have their
functions marked as such.
Suggested-by: Martin Sebor <msebor@gcc.gnu.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Vetter [Thu, 28 Feb 2019 14:49:08 +0000 (15:49 +0100)]
drm/lease: Make sure implicit planes are leased
commit
204f640da6914844b3270b41b29c84f6e3b74083 upstream.
If userspace doesn't enable universal planes, then we automatically
add the primary and cursor planes. But for universal userspace there's
no such check (and maybe we only want to give the lessee one plane,
maybe not even the primary one), hence we need to check for the
implied plane.
v2: don't forget setcrtc ioctl.
v3: Still allow disabling of the crtc in SETCRTC.
Cc: stable@vger.kernel.org
Cc: Keith Packard <keithp@keithp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190228144910.26488-6-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vicente Bergas [Tue, 2 Apr 2019 11:37:53 +0000 (13:37 +0200)]
drm/rockchip: shutdown drm subsystem on shutdown
commit
b8f9d7f37b6af829c34c49d1a4f73ce6ed58e403 upstream.
As explained by Robin Murphy:
> the IOMMU shutdown disables paging, so if the VOP is still
> scanning out then that will result in whatever IOVAs it was using now going
> straight out onto the bus as physical addresses.
We had a more radical approach before in commit
7f3ef5dedb14 ("drm/rockchip: Allow driver to be shutdown on reboot/kexec")
but that resulted in new warnings and oopses on shutdown on rk3399
chromeos devices.
So second try is resurrecting Vicentes shutdown change which should
achieve the same result but in a less drastic way.
Fixes:
63238173b2fa ("Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"")
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Doug Anderson <dianders@chromium.org>
Cc: stable@vger.kernel.org
Suggested-by: JeffyChen <jeffy.chen@rock-chips.com>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
[adapted commit message to explain the history]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Brian Norris <briannorris@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402113753.10118-1-heiko@sntech.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Skrabec [Tue, 14 May 2019 20:43:37 +0000 (22:43 +0200)]
drm/sun4i: Fix sun8i HDMI PHY configuration for > 148.5 MHz
commit
831adffb3b7b8df4c8e20b7b00843129fb87a166 upstream.
Vendor provided documentation says that EMP bits should be set to 3 for
pixel clocks greater than 148.5 MHz.
Fix that.
Cc: stable@vger.kernel.org # 4.17+
Fixes:
4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-3-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jernej Skrabec [Tue, 14 May 2019 20:43:36 +0000 (22:43 +0200)]
drm/sun4i: Fix sun8i HDMI PHY clock initialization
commit
8a943c6021ba8b95a36c842327e468df1fddd4a7 upstream.
Current code initializes HDMI PHY clock driver before reset line is
deasserted and clocks enabled. Because of that, initial readout of
clock divider is incorrect (0 instead of 2). This causes any clock
rate with divider 1 (register value 0) to be set incorrectly.
Fix this by moving initialization of HDMI PHY clock driver after reset
line is deasserted and clocks enabled.
Cc: stable@vger.kernel.org # 4.17+
Fixes:
4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190514204337.11068-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Hellstrom [Tue, 7 May 2019 09:07:53 +0000 (11:07 +0200)]
drm/vmwgfx: Don't send drm sysfs hotplug events on initial master set
commit
63cb44441826e842b7285575b96db631cc9f2505 upstream.
This may confuse user-space clients like plymouth that opens a drm
file descriptor as a result of a hotplug event and then generates a
new event...
Cc: <stable@vger.kernel.org>
Fixes:
5ea1734827bb ("drm/vmwgfx: Send a hotplug event at master_set")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Osipenko [Wed, 6 Mar 2019 22:55:19 +0000 (01:55 +0300)]
drm/tegra: gem: Fix CPU-cache maintenance for BO's allocated using get_pages()
commit
61b51fb51c01a519a249d28ec55c6513a13be5a3 upstream.
The allocated pages need to be invalidated in CPU caches. On ARM32 the
DMA_BIDIRECTIONAL flag only ensures that data is written-back to DRAM and
the data stays in CPU cache lines. While the DMA_FROM_DEVICE flag ensures
that the corresponding CPU cache lines are getting invalidated and nothing
more, that's exactly what is needed for a newly allocated pages.
This fixes randomly failing rendercheck tests on Tegra30 using the
Opentegra driver for tests that use small-sized pixmaps (10x10 and less,
i.e. 1-2 memory pages) because apparently CPU reads out stale data from
caches and/or that data is getting evicted to DRAM at the time of HW job
execution.
Fixes:
bd43c9f0fa1f ("drm/tegra: gem: Map pages via the DMA API")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook [Mon, 20 May 2019 18:50:42 +0000 (11:50 -0700)]
gcc-plugins: Fix build failures under Darwin host
commit
7210e060155b9cf557fb13128353c3e494fa5ed3 upstream.
The gcc-common.h file did not take into account certain macros that
might have already been defined in the build environment. This updates
the header to avoid redefining the macros, as seen on a Darwin host
using gcc 4.9.2:
HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o - due to: scripts/gcc-plugins/gcc-common.h
In file included from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:0:
scripts/gcc-plugins/gcc-common.h:153:0: warning: "__unused" redefined
^
In file included from /usr/include/stdio.h:64:0,
from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/system.h:40,
from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/gcc-plugin.h:28,
from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/plugin.h:23,
from scripts/gcc-plugins/gcc-common.h:9,
from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:
/usr/include/sys/cdefs.h:161:0: note: this is the location of the previous definition
^
Reported-and-tested-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Fixes:
189af4657186 ("ARM: smp: add support for per-task stack canaries")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Coddington [Mon, 20 May 2019 14:33:07 +0000 (10:33 -0400)]
Revert "lockd: Show pid of lockd for remote locks"
commit
141731d15d6eb2fd9aaefbf9b935ce86ae243074 upstream.
This reverts most of commit
b8eee0e90f97 ("lockd: Show pid of lockd for
remote locks"), which caused remote locks to not be differentiated between
remote processes for NLM.
We retain the fixup for setting the client's fl_pid to a negative value.
Fixes:
b8eee0e90f97 ("lockd: Show pid of lockd for remote locks")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: XueWei Zhang <xueweiz@google.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roberto Bergantinos Corpas [Tue, 28 May 2019 07:38:14 +0000 (09:38 +0200)]
CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM
commit
31fad7d41e73731f05b8053d17078638cf850fa6 upstream.
In cifs_read_allocate_pages, in case of ENOMEM, we go through
whole rdata->pages array but we have failed the allocation before
nr_pages, therefore we may end up calling put_page with NULL
pointer, causing oops
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Fri, 17 May 2019 08:12:33 +0000 (09:12 +0100)]
cifs: fix memory leak of pneg_inbuf on -EOPNOTSUPP ioctl case
commit
210782038b54ec8e9059a3c12d6f6ae173efa3a9 upstream.
Currently in the case where SMB2_ioctl returns the -EOPNOTSUPP error
there is a memory leak of pneg_inbuf. Fix this by returning via
the out_free_inbuf exit path that will perform the relevant kfree.
Addresses-Coverity: ("Resource leak")
Fixes:
969ae8e8d4ee ("cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED")
CC: Stable <stable@vger.kernel.org> # v5.1+
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tim Collier [Sat, 11 May 2019 17:40:46 +0000 (18:40 +0100)]
staging: wlan-ng: fix adapter initialization failure
commit
a67fedd788182764dc8ed59037c604b7e60349f1 upstream.
Commit
e895f00a8496 ("Staging: wlan-ng: hfa384x_usb.c Fixed too long
code line warnings.") moved the retrieval of the transfer buffer from
the URB from the top of function hfa384x_usbin_callback to a point
after reposting of the URB via a call to submit_rx_urb. The reposting
of the URB allocates a new transfer buffer so the new buffer is
retrieved instead of the buffer containing the response passed into
the callback. This results in failure to initialize the adapter with
an error reported in the system log (something like "CTLX[1] error:
state(Request failed)").
This change moves the retrieval to just before the point where the URB
is reposted so that the correct transfer buffer is retrieved and
initialization of the device succeeds.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Fixes:
e895f00a8496 ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Wed, 15 May 2019 09:38:33 +0000 (12:38 +0300)]
staging: vc04_services: prevent integer overflow in create_pagelist()
commit
ca641bae6da977d638458e78cd1487b6160a2718 upstream.
The create_pagelist() "count" parameter comes from the user in
vchiq_ioctl() and it could overflow. If you look at how create_page()
is called in vchiq_prepare_bulk_data(), then the "size" variable is an
int so it doesn't make sense to allow negatives or larger than INT_MAX.
I don't know this code terribly well, but I believe that typical values
of "count" are typically quite low and I don't think this check will
affect normal valid uses at all.
The "pagelist_size" calculation can also overflow on 32 bit systems, but
not on 64 bit systems. I have added an integer overflow check for that
as well.
The Raspberry PI doesn't offer the same level of memory protection that
x86 does so these sorts of bugs are probably not super critical to fix.
Fixes:
71bad7f08641 ("staging: add bcm2708 vchiq driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
George G. Davis [Wed, 15 May 2019 03:29:34 +0000 (23:29 -0400)]
serial: sh-sci: disable DMA for uart_console
commit
099506cbbc79c0bd52b19cb6b930f256dabc3950 upstream.
As noted in commit
84b40e3b57ee ("serial: 8250: omap: Disable DMA for
console UART"), UART console lines use low-level PIO only access functions
which will conflict with use of the line when DMA is enabled, e.g. when
the console line is also used for systemd messages. So disable DMA
support for UART console lines.
Reported-by: Michael Rodin <mrodin@de.adit-jv.com>
Link: https://patchwork.kernel.org/patch/10929511/
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Grzegorz Halat [Fri, 26 Apr 2019 14:59:46 +0000 (16:59 +0200)]
vt/fbcon: deinitialize resources in visual_init() after failed memory allocation
commit
a1ad1cc9704f64c169261a76e1aee1cf1ae51832 upstream.
After memory allocation failure vc_allocate() doesn't clean up data
which has been initialized in visual_init(). In case of fbcon this
leads to divide-by-0 in fbcon_init() on next open of the same tty.
memory allocation in vc_allocate() may fail here:
1097: vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
on next open() fbcon_init() skips vc_font.data initialization:
1088: if (!p->fontdata) {
division by zero in fbcon_init() happens here:
1149: new_cols /= vc->vc_font.width;
Additional check is needed in fbcon_deinit() to prevent
usage of uninitialized vc_screenbuf:
1251: if (vc->vc_hi_font_mask && vc->vc_screenbuf)
1252: set_vc_hi_font(vc, false);
Crash:
#6 [
ffffc90001eafa60] divide_error at
ffffffff81a00be4
[exception RIP: fbcon_init+463]
RIP:
ffffffff814b860f RSP:
ffffc90001eafb18 RFLAGS:
00010246
...
#7 [
ffffc90001eafb60] visual_init at
ffffffff8154c36e
#8 [
ffffc90001eafb80] vc_allocate at
ffffffff8154f53c
#9 [
ffffc90001eafbc8] con_install at
ffffffff8154f624
...
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Reviewed-by: Oleksandr Natalenko <oleksandr@redhat.com>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roberto Sassu [Wed, 29 May 2019 13:30:33 +0000 (15:30 +0200)]
evm: check hash algorithm passed to init_desc()
commit
221be106d75c1b511973301542f47d6000d0b63e upstream.
This patch prevents memory access beyond the evm_tfm array by checking the
validity of the index (hash algorithm) passed to init_desc(). The hash
algorithm can be arbitrarily set if the security.ima xattr type is not
EVM_XATTR_HMAC.
Fixes:
5feeb61183dde ("evm: Allow non-SHA1 digital signatures")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roberto Sassu [Wed, 29 May 2019 13:30:35 +0000 (15:30 +0200)]
ima: show rules with IMA_INMASK correctly
commit
8cdc23a3d9ec0944000ad43bad588e36afdc38cd upstream.
Show the '^' character when a policy rule has flag IMA_INMASK.
Fixes:
80eae209d63ac ("IMA: allow reading back the current IMA policy")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Corbet [Tue, 21 May 2019 20:23:43 +0000 (14:23 -0600)]
doc: Cope with Sphinx logging deprecations
commit
096ea522e84ea68f8e6c41e5e7294731a81e29bc upstream.
Recent versions of sphinx will emit messages like:
Documentation/sphinx/kerneldoc.py:103:
RemovedInSphinx20Warning: app.warning() is now deprecated.
Use sphinx.util.logging instead.
Switch to sphinx.util.logging to make this unsightly message go away.
Alas, that interface was only added in version 1.6, so we have to add a
version check to keep things working with older sphinxes.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Corbet [Tue, 21 May 2019 20:42:34 +0000 (14:42 -0600)]
doc: Cope with the deprecation of AutoReporter
commit
2404dad1f67f8917e30fc22a85e0dbcc85b99955 upstream.
AutoReporter is going away; recent versions of sphinx emit a warning like:
Documentation/sphinx/kerneldoc.py:125:
RemovedInSphinx20Warning: AutodocReporter is now deprecated.
Use sphinx.util.docutils.switch_source_input() instead.
Make the switch. But switch_source_input() only showed up in 1.7, so we
have to do ugly version checks to keep things working in older versions.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Corbet [Wed, 22 May 2019 20:30:45 +0000 (14:30 -0600)]
docs: Fix conf.py for Sphinx 2.0
commit
3bc8088464712fdcb078eefb68837ccfcc413c88 upstream.
Our version check in Documentation/conf.py never envisioned a world where
Sphinx moved beyond 1.x. Now that the unthinkable has happened, fix our
version check to handle higher version numbers correctly.
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Tue, 28 May 2019 11:39:34 +0000 (12:39 +0100)]
arm64: Fix the arm64_personality() syscall wrapper redirection
commit
00377277166bac6939d8f72b429301369acaf2d8 upstream.
Following commit
4378a7d4be30 ("arm64: implement syscall wrappers"), the
syscall function names gained the '__arm64_' prefix. Ensure that we
have the correct #define for redirecting a default syscall through a
wrapper.
Fixes:
4378a7d4be30 ("arm64: implement syscall wrappers")
Cc: <stable@vger.kernel.org> # 4.19.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenliang Wei [Sat, 1 Jun 2019 05:30:52 +0000 (22:30 -0700)]
kernel/signal.c: trace_signal_deliver when signal_group_exit
commit
98af37d624ed8c83f1953b1b6b2f6866011fc064 upstream.
In the fixes commit, removing SIGKILL from each thread signal mask and
executing "goto fatal" directly will skip the call to
"trace_signal_deliver". At this point, the delivery tracking of the
SIGKILL signal will be inaccurate.
Therefore, we need to add trace_signal_deliver before "goto fatal" after
executing sigdelset.
Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info.
Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com
Fixes:
cf43a757fd4944 ("signal: Restore the stop PTRACE_EVENT_EXIT")
Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com>
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ivan Delalande <colona@arista.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Slaby [Sat, 1 Jun 2019 05:30:26 +0000 (22:30 -0700)]
memcg: make it work on sparse non-0-node systems
commit
3e8589963773a5c23e2f1fe4bcad0e9a90b7f471 upstream.
We have a single node system with node 0 disabled:
Scanning NUMA topology in Northbridge 24
Number of physical nodes 2
Skipping disabled node 0
Node 1 MemBase
0000000000000000 Limit
00000000fbff0000
NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff]
This causes crashes in memcg when system boots:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
#PF error: [normal kernel read fault]
...
RIP: 0010:list_lru_add+0x94/0x170
...
Call Trace:
d_lru_add+0x44/0x50
dput.part.34+0xfc/0x110
__fput+0x108/0x230
task_work_run+0x9f/0xc0
exit_to_usermode_loop+0xf5/0x100
It is reproducible as far as 4.12. I did not try older kernels. You have
to have a new enough systemd, e.g. 241 (the reason is unknown -- was not
investigated). Cannot be reproduced with systemd 234.
The system crashes because the size of lru array is never updated in
memcg_update_all_list_lrus and the reads are past the zero-sized array,
causing dereferences of random memory.
The root cause are list_lru_memcg_aware checks in the list_lru code. The
test in list_lru_memcg_aware is broken: it assumes node 0 is always
present, but it is not true on some systems as can be seen above.
So fix this by avoiding checks on node 0. Remember the memcg-awareness by
a bool flag in struct list_lru.
Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz
Fixes:
60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joe Burmeister [Mon, 13 May 2019 10:23:57 +0000 (11:23 +0100)]
tty: max310x: Fix external crystal register setup
commit
5d24f455c182d5116dd5db8e1dc501115ecc9c2c upstream.
The datasheet states:
Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
(crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
clocking
Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
oscillator. When using an external clock source at XIN, CrystalEn must
be set low.
The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.
This was required to make the MAX3107 with an external crystal on our
board able to send or receive data.
Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jorge Ramirez-Ortiz [Mon, 20 May 2019 18:38:48 +0000 (20:38 +0200)]
tty: serial: msm_serial: Fix XON/XOFF
commit
61c0e37950b88bad590056286c1d766b1f167f4e upstream.
When the tty layer requests the uart to throttle, the current code
executing in msm_serial will trigger "Bad mode in Error Handler" and
generate an invalid stack frame in pstore before rebooting (that is if
pstore is indeed configured: otherwise the user shall just notice a
reboot with no further information dumped to the console).
This patch replaces the PIO byte accessor with the word accessor
already used in PIO mode.
Fixes:
68252424a7c7 ("tty: serial: msm: Support big-endian CPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahisa Kojima [Tue, 21 May 2019 01:33:50 +0000 (10:33 +0900)]
i2c: synquacer: fix synquacer_i2c_doxfer() return value
commit
ff9378904d9d7a3fcb8406604e089e535e357b1d upstream.
master_xfer should return the number of messages successfully
processed.
Fixes:
0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Okamoto Satoru <okamoto.satoru@socionext.com>
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vadim Pasternak [Thu, 16 May 2019 17:15:41 +0000 (17:15 +0000)]
i2c: mlxcpld: Fix wrong initialization order in probe
commit
13067ef73f337336e3149f5bb9f3fd05fe7f87a0 upstream.
Fix wrong order in probing routine initialization - field `base_addr'
is used before it's initialized. Move assignment of 'priv->base_addr`
to the beginning, prior the call to mlxcpld_i2c_read_comm().
Wrong order caused the first read of capability register to be executed
at wrong offset 0x0 instead of 0x2000. By chance it was a "good
garbage" at 0x0 offset.
Fixes:
313ce648b5a4 ("i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>