mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K

When the clock is less than 400K, some SD cards fail to initialize
because CLK_AUTO is enabled.

Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221207051909.32126-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-esdhc: Modify mismatched function name

No functional modification involved.

drivers/mmc/host/sdhci-of-esdhc.c:243: warning: expecting prototype for _fixup(). Prototype was for esdhc_writel_fixup() instead.
drivers/mmc/host/sdhci-of-esdhc.c:117: warning: expecting prototype for _fixup(). Prototype was for esdhc_readl_fixup() instead.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3397
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221209034134.38477-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs

Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202212081138191215291@zte.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-tegra: Issue CMD and DAT resets together

In case of error condition to avoid system crash Tegra SDMMC controller
requires CMD and DAT resets issued together. SDHCI controller FSM goes
into bad state due to rapid SD card hot-plug event. Issuing reset on the
CMD FSM before DATA FSM results in kernel panic, hence add support to
issue CMD and DAT resets together.

This is applicable to Tegra186 and later chips.

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-7-thierry.reding@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-tegra: Add support to program MC stream ID

SMMU clients are supposed to program stream ID from their respective
address spaces instead of MC override. Define NVQUIRK_PROGRAM_STREAMID
and use it to program SMMU stream ID from the SDMMC client address
space.

Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-6-thierry.reding@gmail.com
[Ulf: Fixed a checkpatch error]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data

Create new SoC data structure for Tegra234 platforms. Additional
features, tap value configurations are added/updated for Tegra234
platform hence separate Tegra194 and Tegra234 SoC data.

Signed-off-by: Aniruddha Tvs Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-5-thierry.reding@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-tegra: Sort includes alphabetically

Sort includes alphabetically to make it easier to add new ones
subsequently.

Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-4-thierry.reding@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper

Access to the internals of struct iommu_fwspec by non-IOMMU drivers is
discouraged. Many drivers for Tegra SoCs, however, need access to their
IOMMU stream IDs so that they can be programmed into various hardware
registers.

Formalize this access into a common helper to make it easier to audit
and maintain.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-3-thierry.reding@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

iommu: Add note about struct iommu_fwspec usage

This structure is to be considered private to the IOMMU API. Except for
very few exceptions, IOMMU consumer drivers should treat this as opaque
data.

Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221206165945.3551774-2-thierry.reding@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n

With W=1, we can see this gcc warning:

drivers/mmc/host/sdhci-brcmstb.c:182:34: warning: ‘sdhci_brcm_of_match’ defined but not used [-Wunused-const-variable=]
  182 | static const struct of_device_id sdhci_brcm_of_match[] = {
      |                                  ^~~~~~~~~~~~~~~~~~~

Rather than play around more with #ifdef's, the simplest solution is to
just mark this __maybe_unused.

Fixes: 50bfe185c42a ("mmc: sdhci-brcmstb: Allow building with COMPILE_TEST")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202212060700.NjMecjxS-lkp@intel.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205160353.1.I5fa28f1045f17fb9285d507accf139f8b2a8f4b5@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: allow dma-coherent

SM8350, SM8450 and SM8550 SDHCI controllers for SD card are marked with
dma-coherent, so allow it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC

There is no need to explicitly list properties already brought by
mmc-controller.yaml schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: cleanup style

Drop unnecessary quotes from $ref.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-am654: cleanup style

Cleanup coding style without functional changes:
1. Drop unnecessary quotes from $ref.
2. Use simple enum for compatible enumeration and sort entries.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask

The Linux SDHCI driver core reads 'sdhci-caps' and 'sdhci-caps-mask'
properties and few devices already use it (e.g. Qualcomm SM8450), so add
them to a shared SDHCI bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221204094717.74016-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING

vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here.
Ensure that we mark current as TASK_RUNNING for sleepable context.

[   77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0
[   77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160
[   77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G           OE      6.1.0-rc5 #1
[   77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020
[   77.554912] RIP: 0010:__might_sleep+0x116/0x160
[   77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282
[   77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000
[   77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9
[   77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba
[   77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60
[   77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660
[   77.554934] FS:  0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000
[   77.554937] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0
[   77.554942] Call Trace:
[   77.554944]  <TASK>
[   77.554952]  mutex_lock+0x78/0xf0
[   77.554973]  vub300_enable_sdio_irq+0x103/0x3c0 [vub300]
[   77.554981]  sdio_irq_thread+0x25c/0x5b0
[   77.555006]  kthread+0x2b8/0x370
[   77.555017]  ret_from_fork+0x1f/0x30
[   77.555023]  </TASK>
[   77.555025] ---[ end trace 0000000000000000 ]---

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87dc45b122d26d63c80532976813c9365d7160b3.1670140888.git.deren.wu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver

Taking over as upstream maintainer for Broadcom SDHCI
driver from Al Cooper.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221202212119.43214-1-kdasu.kdev@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-esdhc: limit the SDHC clock frequency

The highest clock frequency for eMMC HS200 mode on ls1043a
is 116.7Mhz according to its specification.
So add the limit to gate the frequency.

Signed-off-by: Andy Tang <andy.tang@nxp.com>
Link: https://lore.kernel.org/r/20221202075905.25363-1-andy.tang@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci: Remove unneeded semicolon

The semicolon after the "}" is unneeded.

Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/202212021031575255977@zte.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: Normalize the error handling branch in sd_read_ext_regs()

Let's use pr_err() to output the error messages and let's extend a comment
to clarify why returning 0 (success) in one case make sense.

Fixes: c784f92769ae ("mmc: core: Read the SD function extension registers for power management")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[Ulf: Clarified the comment and the commit-msg]
Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: Remove comment on wakeup-source property

The current comment on wakeup-source is a little confusing because
the word deprecated can be interpreted at first glance to mean that
wakeup-source is deprecated. Also mentioning the obsolete property
confuses more than it helps. Therefore, the comment should be removed
completely because the enable-sdio-wakeup property is not used in
any current DTs. Also remove enable-sdio-wakeup reference in
wakeup-source.txt

Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221130121033.7270-1-cniedermaier@dh-electronics.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci: Avoid unnecessary ->set_clock()

To avoid glitches on the clock line, the card clock is disabled when making
timing changes. Do not do that separately for HISPD and UHS settings.

Tested-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221128133259.38305-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mmc-hsq: Use fifo to dispatch mmc_request

Current next_tag selection will cause a large delay in some requests and
destroy the scheduling results of the block scheduling layer. Because the
issued mrq tags cannot ensure that each time is sequential, especially when
the IO load is heavy. In the fio performance test, we found that 4k random
read data was sent to mmc_hsq to start calling request_atomic It takes
nearly 200ms to process the request, while mmc_hsq has processed thousands
of other requests. So we use fifo here to ensure the first in, first out
feature of the request and avoid adding additional delay to the request.

Reviewed-by: Wenchao Chen <wenchao.chen@unisoc.com>
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Link: https://lore.kernel.org/r/20221128093847.22768-1-michael@allwinnertech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

memstick/ms_block: Add check for alloc_ordered_workqueue

As the alloc_ordered_workqueue may return NULL pointer, it should be better
to add check for the return value. Moreover, the msb->io_queue should be
freed if error occurs later.

Fixes: 0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221126012558.34374-1-jiasheng@iscas.ac.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: refactor debugfs code

Now, CONFIG_DEBUG_FS is scattered in various functions, to make code
clean centralized processing CONFIG_DEBUG_FS in mmc debugfs module.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20221126102520.2824574-1-yebin@huaweicloud.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: Avoid open coding by using mmc_op_tuning()

Replace code with the already defined function. No functional changes.

Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: Remove unneeded semicolon

./drivers/mmc/host/sunplus-mmc.c:321:2-3: Unneeded semicolon

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3238
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221123021221.9646-1-yang.lee@linux.alibaba.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: Remove non-data R1B ioctl workaround

The workaround of pretending R1B non-data transfers are data transfers in
order for the busy timeout to be respected by the host controller driver is
removed. It wasn't useful in a long time.

Initially the workaround ensured that R1B commands did not time out by
setting the data timeout to be the command timeout in commit cb87ea28ed9e
("mmc: core: Add mmc CMD+ACMD passthrough ioctl"). This was moved inside an
if-clause with idata->buf_bytes being set in commit 4d6144de8ba2 ("mmc:
core: check for zero length ioctl data"). Since the workaround is now
inside the idata->buf_bytes clause and intended to fix R1B non-data
transfers, that do not have buf_bytes set, we can remove the workaround
altogether. This was dead code, since data transfers doesn't use R1B
commands.

Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/57d4aceb25254e448bd3e575bd99b0c2@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: use plain numbers for end_flags

Linux *_bit accessors take plain bit numbers, no need for BIT().

Fixes: c330601c9c93 ("mmc: renesas_sdhi: take DMA end interrupts into account")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221122080554.4468-1-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: Add mmc driver for Sunplus SP7021

This is a patch for mmc driver for Sunplus SP7021 SOC.
Supports eMMC 4.41 DDR 104MB/s speed mode.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
Link: https://lore.kernel.org/r/c92d67596f3cc10d41585b9ab82be7da2cc4c9d8.1669023361.git.tonyhuang.sunplus@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-binding: mmc: Add mmc yaml file for Sunplus SP7021

Add MMC YAML file for Sunplus SP7021.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
Link: https://lore.kernel.org/r/8c8fbc29524819d8ab45a4fe75311b3b7b567650.1669023361.git.tonyhuang.sunplus@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: use new convenience macro from MMC core

Makes the code more readable.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: add helper to access quirks

Add a macro to check for a quirk because it a) ensures that the check
for non-empty 'quirks' struct is not forgotten and b) is easier to read.
Convert existing quirk access as well.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: better reset from HS400 mode

Up to now, HS400 adjustment mode was only disabled on soft reset when a
calibration table was in use. It is safer, though, to disable it as soon
as the instance has an adjustment related quirk set, i.e. bad taps or a
calibration table.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: alway populate SCC pointer

We need the SCC pointer to reset the device, so populate it even when we
don't need it for tuning.

Fixes: 45bffc371fef ("mmc: renesas_sdhi: only reset SCC when its pointer is populated")
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221120113457.42010-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: pwrseq: Use device_match_of_node()

Replace the open-code with device_match_of_node().

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202211171524116446204@zte.com.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

clk: socfpga: remove the setting of clk-phase for sdmmc_clk

Now that the SDMMC driver supports setting the clk-phase, we can remove
the need to do it in the clock driver.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-5-dinguyen@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: dw_mmc-pltfm: socfpga: add method to configure clk-phase

The clock-phase settings for the SDMMC controller in the SoCFPGA
platforms reside in a register in the System Manager. Add a method
to access that register through the syscon interface.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-4-dinguyen@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: synopsys-dw-mshc: document "altr,sysmgr-syscon"

Document the optional "altr,sysmgr-syscon" binding that is used to
access the System Manager register that controls the SDMMC clock
phase.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-1-dinguyen@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci: Fix the SD tuning issue that the SDHCI_TRANSFER_MODE is cleared incorrectly

When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
should also be kept

Signed-off-by: Charl Liu <charl.liu@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221111122314.307-1-charl.liu@bayhubtech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio: remove 'alignment_shift' from platform data

There is only one alignment shift for one type of Renesas SDHI. Encode
it directly in its DMA driver to reduce complexity and ease further
simplifications.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221102125430.28466-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio: remove tmio_mmc_k(un)map_atomic helpers

After a8402aed8ca5 ("mmc: tmio_mmc_core: Remove
local_irq_{save,restore}() around k[un]map_atomic()") and ac91578a6812
("mmc: tmio_mmc_core: Replace kmap_atomic() with kmap_local_page()"),
the helpers contain just a single call. Putting it directly in the code
makes it actually more readable. More so, because we now avoid the
'offset' calculation when mapping/unmapping and just use it when we need
it in the copy routines.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221102125430.28466-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: take DMA end interrupts into account

So far, we have been relying on access_end interrupts only to mark DMA
transfers as done implying that DMA end interrupts have occurred by then
anyhow. On some SoCs under some conditions, this turned out to be not
enough. So, we enable DMA interrupts as well and make sure that both
events, DMA irq and access_end irq, have happened before finishing the
DMA transfer.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221006190452.5316-6-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: add quirk for broken register layout

Some early Gen3 SoCs have the DTRANEND1 bit at a different location than
all later SoCs. Because we need the bit soon, add a quirk so we know
which bit to use.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221006190452.5316-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio: add callback for dma irq

We don't want to rely only on the access_end irq in the future, so
implement a callback for dma irqs.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221006190452.5316-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: improve naming of DMA struct

Commit 058db2868cd8 ("mmc: tmio, renesas_sdhi: move struct tmio_mmc_dma
to renesas_sdhi.h") is correct. The DMA struct should be prefixed with
'renesas_sdhi' to avoid confusion about is namespace. Fix some
indentation while here.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221006190452.5316-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: renesas_sdhi: remove accessor function for internal_dmac

This accessor function does not help readability but makes it worse.
Because I soon need to read from the registers as well and don't want to
add another function like this, I chose to remove the existing one and
use the accessor directly. I also switch from writeq to writel because
no 64 bit register is actually involved.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221006190452.5316-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: f-sdh30: Add quirks for broken timeout clock capability

There is a case where the timeout clock is not supplied to the capability.
Add a quirk for that.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-7-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: f-sdh30: Add support for non-removable media

To use F_SDH30 for non-removable meda like eMMC,
need to enable FORCE_CARD_INSERT bit to skip the delay for detection.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-6-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: f-sdh30: Add compatible string for Socionext F_SDH30_E51

Add a compatible string for Socionext F_SDH30_E51.
Since this IP is transferred to Socionext, so append it to Copyright
and MODULE_AUTHOR as vendor name.

F_SDH30_E51 is a higher version of F_SDH30 that supports eMMC 5.1,
though, currently there are no new features for this IP in this driver,
just add the compatible string.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20221111081033.3813-5-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: sdhci-fujitsu: Add compatible string for F_SDH30_E51

Add a compatible string for F_SDH30_E51 IP to the documentation.
Since this IP is transferred to Socionext, so append it as vendor name.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-4-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: f-sdh30: Add reset control support

Add reset control support for F_SDH30 controller. This is optional.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-3-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: Convert sdhci-fujitsu to JSON schema

Convert the Fujitsu SDHCI controller IP binding to DT schema format,
and add resets property as optional to support reset control.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221111081033.3813-2-hayashi.kunihiko@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mtk-sd: fix two spelling mistakes in comment

spelling mistake fix : "alreay" -> "already"
       "checksume" -> "checksum"

Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221110072819.11530-1-yuzhe@nfschina.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: Document the SM8550 compatible

Document the compatible for SDHCI on SM8550.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-sdhci-v1-0-797864a30e71@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: Document SM8350 SDHCI

Document the SDHCI on SM8350.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221116123612.34302-1-konrad.dybcio@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: Document the SM6375 compatible

Document the compatible for SDHCI on SM6375.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221114105043.36698-2-konrad.dybcio@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mmci: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which
will call mmc_free_host().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109133539.3275664-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: wbsd: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

So fix this by checking the return value and goto error path which
will call mmc_free_host(), besides, other resources also need be
released.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109133237.3273558-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: via-sdmmc: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path which
will call mmc_free_host().

Fixes: f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108130949.1067699-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: meson-gx: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path which
will call mmc_free_host().

Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221108123417.479045-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: omap_hsmmc: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

Fix this by checking the return value and goto error path wihch
will call mmc_free_host().

Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108121316.340354-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: atmel-mci: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
   delete device, but it's not added yet, it will lead a kernel
   crash because of null-ptr-deref in device_del().

So fix this by checking the return value and calling mmc_free_host()
in the error path.

Fixes: 7d2be0749a59 ("atmel-mci: Driver for Atmel on-chip MMC controllers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221108122819.429975-1-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: rockchip-dw-mshc: Add power-domains property

Document power-domains property in rockchip dw controller.

RV1126 is using eMMC and SDIO power domains but SDMMC is not.

Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221108041400.157052-3-jagan@edgeble.ai
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-of-dwcmhsc: Add reset support

Properly describe reset related properties in the binding.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221107173310.60503-1-sebastian.reichel@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: litex_mmc: ensure `host->irq == 0` if polling

Ensure the flag is explicitly set to 0 if we determine that polling is
needed during driver probe, to cover all possible cases.

Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface")
Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
Link: https://lore.kernel.org/r/20221107155516.2535912-1-gsomlo@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: wmt-sdmmc: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, clk_disable_unprepare() also needs be called.

Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-10-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: vub300: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, the timer added before mmc_add_host() needs be del.

And this patch fixes another missing call mmc_free_host() if usb_control_msg()
fails.

Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-9-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: toshsd: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, free_irq() also needs be called.

Fixes: a5eb8bbd66cc ("mmc: add Toshiba PCI SD controller driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-8-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the
error path, besides, led_classdev_unregister() and pm_runtime_disable() also
need be called.

Fixes: c7f6558d84af ("mmc: Add realtek USB sdmmc host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-7-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: rtsx_pci: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the
error path, beside, runtime PM also needs be disabled.

Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-6-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: pxamci: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host(), besides, ->exit() need be called to uninit the pdata.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-5-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mxcmmc: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host().

Fixes: d96be879ff46 ("mmc: Add a MX2/MX3 specific SDHC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-4-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: moxart: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and goto error path which will call
mmc_free_host().

Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-3-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: alcor: fix return value check of mmc_add_host()

mmc_add_host() may return error, if we ignore its return value, the memory
that allocated in mmc_alloc_host() will be leaked and it will lead a kernel
crash because of deleting not added device in the remove path.

So fix this by checking the return value and calling mmc_free_host() in the
error path.

Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221101063023.1664968-2-yangyingliang@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mtk-sd: add Inline Crypto Engine clock control

Add crypto clock control and ungate it before CQHCI init.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221106033924.9854-2-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: mtk-sd: add Inline Crypto Engine clock

Add optional crypto clock of the Inline Crypto Engine of Mediatek SoCs.

Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221106033924.9854-3-mengqi.zhang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: sdhci-msm: Document compatible for MSM8976

Document the compatible for the SDHCI controller(s) found on MSM8976.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221104172122.252761-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: Remove duplicate words in comments

Remove duplicate words in comments found using the following commands:

pcregrep --color=always -n \
'([^a-zA-Z_])([a-zA-Z_]+)[[:space:]]+\2[^a-zA-Z_]' \
drivers/mmc/host/*.[ch] drivers/mmc/core/*.[ch] \
include/linux/mmc/*.h \
include/uapi/linux/mmc/*.h | \
grep -v 'long long'

pcregrep --color=always -n -M \
'([^a-zA-Z_])([a-zA-Z_]+)[ \t]*\n[[:space:]*]+\2[^a-zA-Z_]' \
drivers/mmc/host/*.[ch] \
drivers/mmc/core/*.[ch] \
include/linux/mmc/*.h \
include/uapi/linux/mmc/*.h

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221102120105.5747-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci_am654: Use dev_err_probe() for mmc_of_parse() return code

Checking phandle references like mmc-pwrseq can result in -EPROBE_DEFER.

Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221101105242.2019036-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-pci: Set PROBE_PREFER_ASYNCHRONOUS

This driver often takes on the order of 10ms to start, but in some cases
as much as 190ms. It shouldn't have many cross-device dependencies to
race with, nor racy access to shared state with other drivers, so this
should be a relatively low risk change. We've done similarly with a
variety of other MMC host drivers already.

This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221028155633.1.I6c4bfb31e88fad934e7360242cb662e01612c1bb@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-esdhc-imx: reset the tuning logic before execute tuning

For standard tuning method on usdhc, the previous tuning result can
impact current tuning result, let current tuning can't set the correct
delay cell. And from the logic, this is also reasonable for manual
tuning method. So reset the tuning logic before execute tuning.
To avoid compile issue, this patch also move the esdhc_reset_tuning()
upper.

Find this issue when support SDIO WiFi in band wakeup feature. After
system resume back, will do re-tuning, but then meet data CRC error.

Do not meet this issue on SD/eMMC, because we already call
esdhc_reset_tuning() when config the legency ios, and SD/eMMC need
to re-init when system resume back, but SDIO device don't do re-init
if it has MMC_PM_KEEP_POWER pm_flags.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1666947869-7904-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-*: Convert drivers to new sdhci_and_cqhci_reset()

An earlier patch ("mmc: cqhci: Provide helper for resetting both SDHCI
and CQHCI") does these operations for us.

I keep these as a separate patch, since the earlier patch is a
prerequisite to some important bugfixes that need to be backported via
linux-stable.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221026124150.v4.7.Ia91f031f5f770af7bd2ff3e28b398f277606d970@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-of-arasan: Add support for dynamic configuration

Add dynamic configuration support for Xilinx ZynqMP which takes care of
configuring the SD secure space configuration registers using EEMI APIs,
performing SD reset assert and deassert.
High level sequence:
- Check for the PM dynamic configuration support, if no error proceed with
SD dynamic configurations(next steps) otherwise skip the dynamic
configuration.
- Put the SD Controller in reset.
- Configure SD Fixed configurations.
- Configure the SD Slot Type.
- Configure the BASE_CLOCK.
- Configure the 8-bit support.
- Bring the SD Controller out of reset.
- Wait for 1msec delay.

Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221019054857.8286-1-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mediatek: add support for MT7986 SoC

Adding mt7986 own characteristics and of_device_id to have support
of MT7986 SoC.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221025132953.81286-7-linux@fw-web.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: Add support for Mediatek MT7986

This commit adds dt-binding documentation of mmc for Mediatek MT7986 SoC
Platform.
Add SoC specific section for defining clock configuration.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221025132953.81286-3-linux@fw-web.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

dt-bindings: mmc: mtk-sd: Set clocks based on compatible

The binding was describing a single clock list for all platforms, but
that's not really suitable:

Most platforms using at least 2 clocks (source, hclk), some of them
a third "source_cg". Mt2712 requires an extra 'bus_clk' on some of
its controllers, while mt8192 requires 8 clocks.

Move the clock definitions inside if blocks that match on the
compatibles.

I used Patch from Nícolas F. R. A. Prado and modified it to not using
"not" statement.

Fixes: 59a23395d8aa ("dt-bindings: mmc: Add support for MT8192 SoC")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221025132953.81286-2-linux@fw-web.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: host: Fix repeated words in comments

Delete the redundant word 'the'.

Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Link: https://lore.kernel.org/r/20221022062237.10333-1-wangjianli@cdjrlc.com
Link: https://lore.kernel.org/r/20221022062331.11395-1-wangjianli@cdjrlc.com
Link: https://lore.kernel.org/r/20221022062505.13155-1-wangjianli@cdjrlc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-esdhc-imx: improve imxrt1050 data

i.MXRT1050 usdhc is not affected by ESDHC_FLAG_ERR004536 so let's remove
it. It supports ESDHC_FLAG_STD_TUNING and ESDHC_FLAG_HAVE_CAP1 so let's add
them.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221017235602.86250-3-giulio.benetti@benettiengineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: sdhci-brcmstb: Allow building with COMPILE_TEST

This driver is pretty simple, and it can be useful to build it (for
validation purposes) without BMIPS or ARCH_BRCMSTB.

It technically depends on CONFIG_OF to do anything useful at runtime,
but it still works out OK for compile-testing using the !OF stubs.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221024181759.2355583-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: wbsd: Replace kmap_atomic() with kmap_local_page()

kmap_local_page() is equivalent to kmap_atomic() except that it does not
disable page faults or preemption. Where possible kmap_local_page() is
preferred to kmap_atomic() - refer kernel highmem documentation.

In this case, there is no need to disable page faults or preemption, so
replace kmap_atomic() with kmap_local_page(), and, correspondingly,
kunmap_atomic() with kunmap_local().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-15-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: au1xmmc: Replace kmap_atomic() with kmap_local_page()

kmap_local_page() is equivalent to kmap_atomic() except that it does not
disable page faults or preemption. Where possible kmap_local_page() is
preferred to kmap_atomic() - refer kernel highmem documentation.

In this case, there is no need to disable page faults or preemption, so
replace kmap_atomic() with kmap_local_page(), and, correspondingly,
kunmap_atomic() with kunmap_local().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-14-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio_mmc_core: Replace kmap_atomic() with kmap_local_page()

kmap_local_page() is equivalent to kmap_atomic() except that it does not
disable page faults or preemption. Where possible kmap_local_page() is
preferred to kmap_atomic() - refer kernel highmem documentation.

In this case, there is no need to disable page faults or preemption, so
replace kmap_atomic() with kmap_local_page(), and, correspondingly,
kunmap_atomic() with kunmap_local().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221005101951.3165-13-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tmio_mmc_core: Remove local_irq_{save,restore}() around k[un]map_atomic()

A long time ago the kmap_atomic API required a slot to be provided which
risked the possibility that other code might use the same slot at the
same time. Disabling interrupts prevented the possibility of an interrupt
handler doing that. However, that went away with
commit 3e4d3af501cc ("mm: stack based kmap_atomic()").

When the second argument to kmap_atomic was removed by commit 482fce997e14
("mmc: remove the second argument of k[un]map_atomic()"),
local_irq_{save,restore}() should have been removed also.

Remove it now.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221005101951.3165-12-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tifm_sd: Replace kmap_atomic() with kmap_local_page()

kmap_local_page() is equivalent to kmap_atomic() except that it does not
disable page faults or preemption. Where possible kmap_local_page() is
preferred to kmap_atomic() - refer kernel highmem documentation.

In this case, there is no need to disable page faults or preemption, so
replace kmap_atomic() with kmap_local_page(), and, correspondingly,
kunmap_atomic() with kunmap_local().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-11-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tifm_sd: Remove local_irq_{save,restore}() around tifm_sd_bounce_block()

tifm_sd_bounce_block() calls functions that ultimate use kmap_atomic() to
map pages.

A long time ago the kmap_atomic API required a slot to be provided which
risked the possibility that other code might use the same slot at the
same time. Disabling interrupts prevented the possibility of an interrupt
handler doing that. However, that went away with
commit 3e4d3af501cc ("mm: stack based kmap_atomic()").

When the second argument to kmap_atomic was removed by commit 482fce997e14
("mmc: remove the second argument of k[un]map_atomic()"),
local_irq_{save,restore}() should have been removed also.

Remove it now.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-10-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: tifm_sd: Remove local_irq_{save,restore}() around tifm_sd_transfer_data()

tifm_sd_transfer_data() calls functions that ultimate use kmap_atomic() to
map pages.

A long time ago the kmap_atomic API required a slot to be provided which
risked the possibility that other code might use the same slot at the
same time. Disabling interrupts prevented the possibility of an interrupt
handler doing that. However, that went away with
commit 3e4d3af501cc ("mm: stack based kmap_atomic()").

When the second argument to kmap_atomic was removed by commit 482fce997e14
("mmc: remove the second argument of k[un]map_atomic()"),
local_irq_{save,restore}() should have been removed also.

Remove it now.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-9-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: mmc_test: Remove local_irq_{save,restore}() around sg_copy_{from,to}_buffer()

sg_copy_{from,to}_buffer() call sg_copy_buffer() which uses an
sg_mapping_iter with flag SG_MITER_ATOMIC, so then sg_miter_next() uses
kmap_atomic() to map pages.

A long time ago the kmap_atomic API required a slot to be provided which
risked the possibility that other code might use the same slot at the
same time. Disabling interrupts prevented the possibility of an interrupt
handler doing that. However, that went away with
commit 3e4d3af501cc ("mm: stack based kmap_atomic()").

Remove local_irq_{save,restore}() around sg_copy_{from,to}_buffer().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-8-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: bcm2835: Replace kmap_atomic() with kmap_local_page()

kmap_local_page() is equivalent to kmap_atomic() except that it does not
disable page faults or preemption. Where possible kmap_local_page() is
preferred to kmap_atomic() - refer kernel highmem documentation.

In this case, there is no need to disable page faults or preemption, so
replace kmap_atomic() with kmap_local_page(), and, correspondingly,
kunmap_atomic() with kunmap_local().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-7-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: bcm2835: Remove local_irq_{save,restore}() around sg_miter_{next,stop}()

sg_miter_next() using an sg_mapping_iter with flag SG_MITER_ATOMIC uses
kmap_atomic() to map pages.

A long time ago the kmap_atomic API required a slot to be provided which
risked the possibility that other code might use the same slot at the
same time. Disabling interrupts prevented the possibility of an interrupt
handler doing that. However, that went away with
commit 3e4d3af501cc ("mm: stack based kmap_atomic()").

Remove local_irq_{save,restore}() around sg_miter_{next,stop}().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221005101951.3165-6-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>