Minkyu Kang [Fri, 29 Oct 2010 04:56:40 +0000 (13:56 +0900)]
s5pc210: universal: initialize the panel info
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 29 Oct 2010 02:38:23 +0000 (11:38 +0900)]
s5pc210: universal: add debug codes
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 08:37:02 +0000 (17:37 +0900)]
max17040: use quick start instead of reset
reset is no guarantee. (by vendor)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 07:30:41 +0000 (16:30 +0900)]
s5pc210: universal: add some test codes (will be deleted)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 07:25:01 +0000 (16:25 +0900)]
s5pc210: universal: reset the max17040 more earlier
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 07:10:33 +0000 (16:10 +0900)]
s5pc210: universal: add test code for boot time (will be deleted)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 07:02:24 +0000 (16:02 +0900)]
s5pc210: add SYSTIMER base
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 07:01:28 +0000 (16:01 +0900)]
s5pc210: add system timer setting
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 05:54:12 +0000 (14:54 +0900)]
s5pc210: universal: skip the power/reset squence on LCD
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Jaehoon Chung [Thu, 28 Oct 2010 05:25:03 +0000 (14:25 +0900)]
mmc: Change Tx/Rx Feedback clock delay
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 02:39:29 +0000 (11:39 +0900)]
s5pc210: universal: reduce the boot time (about 80ms)
1. Don't initialize i2c devices twice
2. LDO4 default on
3. Don't show ldo on/off message at boot time
4. Make some messages to debug
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 28 Oct 2010 01:38:36 +0000 (10:38 +0900)]
s5pc210: universal: set bootdelay to zero
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Donghwa Lee [Thu, 28 Oct 2010 01:27:17 +0000 (10:27 +0900)]
s5pc210: reduce lcd power on delay
Kyungmin Park [Wed, 27 Oct 2010 04:47:33 +0000 (13:47 +0900)]
s5pc210: universal: Fix MASSMEMORY_EN pin at each revision
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 26 Oct 2010 11:08:40 +0000 (20:08 +0900)]
s5pc210: universal: extend ADC value for the rev0.2 board detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 26 Oct 2010 07:15:13 +0000 (16:15 +0900)]
s5pc210: universal: Prepare Universal Rev0.2 detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 26 Oct 2010 04:44:37 +0000 (13:44 +0900)]
s5pc210: show the pcb(schematic) revision
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
MyungJoo Ham [Tue, 26 Oct 2010 02:15:02 +0000 (11:15 +0900)]
build: add personal setting, restyle nearby scripts.
MyungJoo Ham [Tue, 26 Oct 2010 02:11:52 +0000 (11:11 +0900)]
s5pc210: universal: LP3974 setting sync with kernel
Heungjun Kim [Mon, 25 Oct 2010 11:01:37 +0000 (20:01 +0900)]
drime3: ex1: workaround
- enable compiling
- issue : saveenv command dosen't work on the u-boot shell
Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Heungjun Kim [Mon, 25 Oct 2010 07:17:39 +0000 (16:17 +0900)]
Revert "drime3: ex1: fix compile error"
- must be another way to solve this problem.
This reverts commit
67b4b03f897d96acec11882d318fecd2c1fecfbc.
Minkyu Kang [Mon, 25 Oct 2010 07:09:25 +0000 (16:09 +0900)]
s5pc210: disable the watchdog
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Heungjun Kim [Mon, 25 Oct 2010 07:08:06 +0000 (16:08 +0900)]
drime3: ex1: disable RTC wakeup booting source
Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Donghwa Lee [Mon, 25 Oct 2010 06:55:38 +0000 (15:55 +0900)]
correct lcd polarity info
Heungjun Kim [Mon, 25 Oct 2010 06:53:19 +0000 (15:53 +0900)]
drime3: acc: prevent hang ()
- cpu_info () must return 0
Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Heungjun Kim [Mon, 25 Oct 2010 06:43:45 +0000 (15:43 +0900)]
drime3: ex1: fix compile error
Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Kyungmin Park [Thu, 21 Oct 2010 11:47:40 +0000 (20:47 +0900)]
Delete the newline when display MMC write
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Heungjun Kim [Thu, 21 Oct 2010 10:48:13 +0000 (19:48 +0900)]
drime3: ex1: add reset code
Signed-off-by: Heungjun Kim <riverful.kim@samsung.com>
Lukasz Majewski [Thu, 21 Oct 2010 10:09:07 +0000 (12:09 +0200)]
build: adjustement of settings
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Minkyu Kang [Thu, 21 Oct 2010 00:34:02 +0000 (09:34 +0900)]
usbd: fix the mmc capacity
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Jaehoon Chung [Wed, 20 Oct 2010 12:18:09 +0000 (21:18 +0900)]
mmc: driver code cleanup
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Minkyu Kang [Wed, 20 Oct 2010 12:04:33 +0000 (21:04 +0900)]
mmc: fix the showing capacity of mmc
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 20 Oct 2010 12:03:26 +0000 (21:03 +0900)]
mmc: driver update
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 20 Oct 2010 11:36:17 +0000 (20:36 +0900)]
mmc: fix the lba value with high capacity
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 20 Oct 2010 11:33:31 +0000 (20:33 +0900)]
Revert "Workaround: mmc: don't check the lba"
This reverts commit
7c5de787221f437fd71a178a83cd618556794b4f.
Minkyu Kang [Wed, 20 Oct 2010 11:13:02 +0000 (20:13 +0900)]
Workaround: mmc: don't check the lba
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Jaehoon Chung [Fri, 15 Oct 2010 00:32:13 +0000 (09:32 +0900)]
s5pc210: universal: fixed wrong paramenter
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 15 Oct 2010 00:21:23 +0000 (09:21 +0900)]
s5pc210: universal: add rootwait for SD-boot
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Minkyu Kang [Thu, 14 Oct 2010 04:43:02 +0000 (13:43 +0900)]
s5pc110: universal: remove unused codes
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Thu, 14 Oct 2010 00:35:55 +0000 (09:35 +0900)]
Build: Remove dummy touch
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Jaehoon Chung [Wed, 13 Oct 2010 10:57:20 +0000 (19:57 +0900)]
Revert "s5pc110: universal: enable dcache and icache"
This reverts commit
80ff64c81ae62be2313138f05af143e0da18b16c.
Jaehoon Chung [Wed, 13 Oct 2010 04:56:56 +0000 (13:56 +0900)]
s5pc110: universal: bug fixed
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 13 Oct 2010 04:49:00 +0000 (13:49 +0900)]
s5pc210: universal: add rootdelay for SD-boot
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 13 Oct 2010 04:14:01 +0000 (13:14 +0900)]
s5pc110: universal: fixed correct comment
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 13 Oct 2010 04:12:20 +0000 (13:12 +0900)]
s5pc110: universal: support to upload uImage in SD-card
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
daeinki [Wed, 13 Oct 2010 02:58:30 +0000 (11:58 +0900)]
s5pc210: changed sdboot setting to partition 2.
Signed-off-by: daeinki <inki.dae@samsung.com>
Minkyu Kang [Wed, 13 Oct 2010 01:28:07 +0000 (10:28 +0900)]
s5pc110: universal: enable dcache and icache
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 12 Oct 2010 23:35:37 +0000 (08:35 +0900)]
Merge branch 'master' of party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Tue, 12 Oct 2010 11:30:30 +0000 (20:30 +0900)]
s5pc210: universal: Pass the revision tag
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 12 Oct 2010 11:30:14 +0000 (20:30 +0900)]
Merge branch 'master' of party:/pub/git/u-boot-s5pc1xx
Joonyoung Shim [Tue, 12 Oct 2010 10:21:42 +0000 (19:21 +0900)]
s5pc210: universal: Fix ubi mtd partition
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Joonyoung Shim [Tue, 12 Oct 2010 10:20:39 +0000 (19:20 +0900)]
usbd: Add modem ubi image checking
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Minkyu Kang [Tue, 12 Oct 2010 10:10:05 +0000 (19:10 +0900)]
s5pc110: universal: revert the lowlevel_init
Because of wrong memory detection
It will be fixed.
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 12 Oct 2010 08:08:54 +0000 (17:08 +0900)]
ARMv7: S5P: add data cache support
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 12 Oct 2010 10:10:05 +0000 (19:10 +0900)]
s5pc110: universal: revert the lowlevel_init
Because of wrong memory detection
It will be fixed.
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 12 Oct 2010 08:08:54 +0000 (17:08 +0900)]
ARMv7: S5P: add data cache support
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 11 Oct 2010 07:42:34 +0000 (16:42 +0900)]
s5pc210: universal: Incrase the ADC range to detect the HWREV
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Mon, 11 Oct 2010 06:21:49 +0000 (15:21 +0900)]
Makefile: move the config to board config file
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 11 Oct 2010 06:13:18 +0000 (15:13 +0900)]
s5pc110: don't make ipl image
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 11 Oct 2010 06:06:05 +0000 (15:06 +0900)]
s5pc110: universal: enable the s-boot
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 11 Oct 2010 04:42:29 +0000 (13:42 +0900)]
s5pc110: universal: fix the gpio base register
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 11 Oct 2010 02:53:31 +0000 (11:53 +0900)]
s5pc110: universal_c110: remove c100 related codes
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 11 Oct 2010 02:52:42 +0000 (11:52 +0900)]
s5pc110: universal: remove compiler warnings
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 8 Oct 2010 08:23:40 +0000 (17:23 +0900)]
s5pc1xx: show the kmsg dump
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Fri, 8 Oct 2010 07:44:06 +0000 (16:44 +0900)]
Merge branch 'master' of party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Fri, 8 Oct 2010 07:43:46 +0000 (16:43 +0900)]
s5pc110: universal: show reset status
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Lukasz Majewski [Thu, 7 Oct 2010 13:54:05 +0000 (15:54 +0200)]
build: build settings
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Marek Szyprowski [Thu, 7 Oct 2010 11:19:12 +0000 (13:19 +0200)]
build: add my individual settings
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Minkyu Kang [Thu, 7 Oct 2010 10:59:36 +0000 (19:59 +0900)]
usbd: use s/w reset when downloading is complete
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
daeinki [Thu, 7 Oct 2010 08:53:40 +0000 (17:53 +0900)]
lcd: changed gamma value to max for ld9040 lcd panel.
Signed-off-by: daeinki <inki.dae@samsung.com>
Minkyu Kang [Thu, 7 Oct 2010 07:42:56 +0000 (16:42 +0900)]
s5pc210: add SBOOT configuration
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Thu, 7 Oct 2010 07:32:32 +0000 (16:32 +0900)]
s5pc210: universal: Don't build the IPL. Use the s-boot
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Thu, 7 Oct 2010 06:46:43 +0000 (15:46 +0900)]
build: make tar image for u-boot.bin
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 7 Oct 2010 06:45:09 +0000 (15:45 +0900)]
usbd: prevent the wrong image downloading
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Thu, 7 Oct 2010 06:17:49 +0000 (15:17 +0900)]
usbd: get the bootloader partition from mtd part
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 6 Oct 2010 10:40:49 +0000 (19:40 +0900)]
s5pc1xx: universal: revert the TEXT_BASE
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Donggeun Kim [Wed, 6 Oct 2010 09:19:40 +0000 (18:19 +0900)]
fs: ubifs: Do not use a buffer allocated from malloc function
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Kyungmin Park [Wed, 6 Oct 2010 05:32:36 +0000 (14:32 +0900)]
s5pc210: universal: Fix OneNAND IPL build
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Wed, 6 Oct 2010 04:42:20 +0000 (13:42 +0900)]
ARM: interrupt: make silent at show_regs function
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Jaehoon Chung [Wed, 6 Oct 2010 04:41:15 +0000 (13:41 +0900)]
s5pc210: universal: enable T-flash detect pin
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Minkyu Kang [Wed, 6 Oct 2010 02:13:01 +0000 (11:13 +0900)]
s5p: fimd/fb: codes clean
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 08:35:00 +0000 (17:35 +0900)]
Merge branch 'master' of party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Tue, 5 Oct 2010 08:34:38 +0000 (17:34 +0900)]
s5pc1xx: universal: disable CONFIG_CMD_SETGETDCR
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 08:34:15 +0000 (17:34 +0900)]
s5pc110: universal: remove s5pc100 related codes
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 5 Oct 2010 08:31:33 +0000 (17:31 +0900)]
s5pc210: universal: Fix hwrev check and set default hwrev as the latest
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Tue, 5 Oct 2010 08:14:27 +0000 (17:14 +0900)]
s5pc210: universal: Update the MTD partition for s-boot
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 05:46:33 +0000 (14:46 +0900)]
s5pc1xx: universal: set the function pointer after relocation
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 05:42:08 +0000 (14:42 +0900)]
s5pc1xx: universal: use board_early_init_f
HW revision checking needs more earlier
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 02:15:27 +0000 (11:15 +0900)]
REMOVE the recovery block related codes
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 01:38:59 +0000 (10:38 +0900)]
s5pc210: universal: use the macro at dram_init
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 01:19:20 +0000 (10:19 +0900)]
Merge branch 'master' of party:/pub/git/u-boot-s5pc1xx
Minkyu Kang [Tue, 5 Oct 2010 01:16:27 +0000 (10:16 +0900)]
s5pc210: universal: increase the malloc len
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 00:59:21 +0000 (09:59 +0900)]
s5pc1xx: universal: move the code base and increase the malloc len
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
MyungJoo Ham [Tue, 5 Oct 2010 00:43:44 +0000 (09:43 +0900)]
Revert "s5pc1xx: cache: do the alignment"
This reverts commit
1ddc5c95607602784950af3bc8bf6595d68bc577.
The intend was to update s5pc210, not s5pc110
Minkyu Kang [Tue, 5 Oct 2010 00:41:00 +0000 (09:41 +0900)]
mmc_ipl: use the correct load address
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 00:40:19 +0000 (09:40 +0900)]
s5pc210: universal: support the new relocation code
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 00:39:37 +0000 (09:39 +0900)]
s5pc1xx: universal: revert the malloc len
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Tue, 5 Oct 2010 00:38:41 +0000 (09:38 +0900)]
ARM: PRELOAD: Don't sub the sp pointer when PRELOADER
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Tue, 5 Oct 2010 00:35:12 +0000 (09:35 +0900)]
lcd: workaround: checking the panel info
Sometimes framebuffer size is very big (or minus) because of panel info is not initialized
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 4 Oct 2010 12:11:01 +0000 (21:11 +0900)]
env_onenand: align the length when env size is lower then mtd erase size
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
projects / kernel / u-boot.git / log