Fabio Estevam [Mon, 3 Jun 2019 19:34:30 +0000 (16:34 -0300)]
iio: imx7d_adc: Remove unneeded error message
In case of ioremap failure, the core code will take care of printing
the error message, so there is no need for having a local error
message in the driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Martijn Braam [Mon, 3 Jun 2019 19:20:39 +0000 (21:20 +0200)]
iio: light: stk3310: Add support for stk3335
The stk3335 light/proximity sensor is similar to the stk3310 and stk3311
sensors and works with the stk3310 driver.
Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Young Xiao [Tue, 4 Jun 2019 12:40:00 +0000 (20:40 +0800)]
iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
The incorrect limit for the for_each_set_bit loop was noticed whilst fixing
this other case. Note that as we only have 3 possible entries a the moment
and the value was set to 4, the bug would not have any effect currently.
It will bite fairly soon though, so best fix it now.
See commit
ef4b4856593f ("iio:core: Fix bug in length of event info_mask and
catch unhandled bits set in masks.") for details.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Alexandru Ardelean [Thu, 6 Jun 2019 10:34:09 +0000 (13:34 +0300)]
staging: iio: ad2s1210: Remove platform data NULL check in probe
The driver only needs to access GPIOs via GPIOLIB. And SPI can be
configured via device-tree or ACPI.
The platform data is a remnant from another time, and should not cause the
driver to error out during probing if it is NULL.
Also, it's not used.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Wolfram Sang [Sat, 8 Jun 2019 10:55:42 +0000 (12:55 +0200)]
iio: light: bh1780: simplify getting the adapter of a client
We have a dedicated pointer for that, so use it. Much easier to read and
less computation involved.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Beniamin Bia [Mon, 27 May 2019 12:56:48 +0000 (15:56 +0300)]
iio: adc: ad7606: Add software configuration
Because this driver will support multiple configurations for software,
the software configuration was made generic.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Beniamin Bia [Mon, 27 May 2019 12:56:47 +0000 (15:56 +0300)]
iio: adc: ad7606: Move oversampling and scale options to chip info
The device dependent options which are going to be different for devices
which will be supported in the future by this driver,
were moved in chip info for a more generic driver. This patch allows
supporting more devices by the driver. Also, it is an intermediate
step of adding support for ad7616 in software mode.
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Neil Armstrong [Mon, 27 May 2019 13:43:14 +0000 (15:43 +0200)]
iio: adc: meson_saradc: update with SPDX Licence identifier
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Renato Lui Geh [Sat, 25 May 2019 01:26:55 +0000 (22:26 -0300)]
MAINTAINERS: add entry for ad7780 adc driver
This patch adds a MAINTAINERS entry for the AD7780 ADC driver.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Renato Lui Geh [Sat, 25 May 2019 01:26:30 +0000 (22:26 -0300)]
dt-bindings: iio: adc: add adi,ad7780.yaml binding
This patch adds a YAML binding for the Analog Devices AD7780/1 and
AD7170/1 analog-to-digital converters.
Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Luís Ferreira [Tue, 2 Apr 2019 16:04:30 +0000 (17:04 +0100)]
iio: accel: add missing sensor for some 2-in-1 based ultrabooks
Some ultrabooks, like Teclast F6 Pro, use KIOX010A sensor on display
and KIOX020A sensor on keyboard base, to detect tablet mode or screen
orientation.
Signed-off-by: Luís Ferreira <luis@aurorafoss.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fabien Lahoudere [Thu, 23 May 2019 09:07:37 +0000 (11:07 +0200)]
docs: iio: add precision about sampling_frequency_available
The documentation give some exemple on what format can be expected
from sampling_frequency_available sysfs attribute
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Eddie James [Tue, 21 May 2019 02:13:34 +0000 (21:13 -0500)]
iio: dps310: Add pressure sensing capability
The DPS310 supports measurement of pressure, so support that in the
driver. Use background measurement like the temperature sensing and
default to lowest precision and lowest measurement rate.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Christopher Bostic [Tue, 21 May 2019 02:13:33 +0000 (21:13 -0500)]
iio: dps310: Temperature measurement errata
Add a manufacturer's suggested workaround to deal with early revisions
of chip that don't indicate correct temperature. Readings can be in the
~60C range when they should be in the ~20's.
Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Joel Stanley [Tue, 21 May 2019 02:13:32 +0000 (21:13 -0500)]
iio: Add driver for Infineon DPS310
The DPS310 is a temperature and pressure sensor. It can be accessed over
i2c and SPI, but this driver only supports polling over i2c.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rodrigo Ribeiro [Fri, 24 May 2019 03:29:50 +0000 (00:29 -0300)]
staging: iio: adis16240: add of_match_table entry
This patch adds of_match_table entry in device driver in order to
enable spi fallback probing.
Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
João Seckler [Sat, 18 May 2019 22:27:33 +0000 (19:27 -0300)]
staging: iio: ad7746: add device tree support
Add a of_device_id struct variable and subsequent call to
MODULE_DEVICE_TABLE macro to support device tree.
Signed-off-by: João Seckler <joaoseckler@gmail.com>
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Co-developed-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Lucas Oshiro [Sat, 18 May 2019 21:44:34 +0000 (18:44 -0300)]
staging: iio: adis16240: add device to module device table
Add a of_device_id struct and MODULE_DEVICE_TABLE call, in order to add
device-tree support for this driver.
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bárbara Fernandes [Sat, 18 May 2019 22:43:33 +0000 (19:43 -0300)]
staging: iio: adt7316: create of_device_id array
Create structure of type of_device_id in order to register all devices
the driver is able to manage.
Signed-off-by: Bárbara Fernandes <barbara.fernandes@usp.br>
Signed-off-by: Wilson Sales <spoonm@spoonm.org>
Co-developed-by: Wilson Sales <spoonm@spoonm.org>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Thiago Estrela [Sat, 18 May 2019 22:42:13 +0000 (19:42 -0300)]
staging: iio: adis16203: Add of_device_id table
Accomplish device tree compatibility to driver ADIS16203
by adding of_device_id table and making a subsequent call to
MODULE_DEVICE_TABLE.
Signed-off-by: Thiago Estrela <thiagestrela@gmail.com>
Signed-off-by: Tiago Napoli <napoli.tiago96@gmail.com>
Co-developed-by: Tiago Napoli <napoli.tiago96@gmail.com>
Signed-off-by: Pedro Sousa <pedroteosousa@gmail.com>
Co-developed-by: Pedro Sousa <pedroteosousa@gmail.com>
Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
João Victor Marques de Oliveira [Sat, 18 May 2019 22:47:20 +0000 (19:47 -0300)]
staging: iio: ad9834: add of_device_id table
Add a of_device_id struct array of_match_table variable and subsequent
call to MODULE_DEVICE_TABLE macro to enable explicit device tree support.
Co-developed-by: Thiago L. A. Miller <tmiller@mochsl.org.br>
Signed-off-by: Thiago L. A. Miller <tmiller@mochsl.org.br>
Co-developed-by: Osvaldo M. Yasuda <omyasuda@yahoo.com.br>
Signed-off-by: Osvaldo M. Yasuda <omyasuda@yahoo.com.br>
Signed-off-by: João Victor Marques de Oliveira <joao.marques.oliveira@usp.br>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Bárbara Fernandes [Sat, 18 May 2019 22:41:36 +0000 (19:41 -0300)]
staging: iio: cdc: ad7150: create macro for capacitance channels
Create macro for capacitance channels in order to remove the repeated
code and improve its readability.
Signed-off-by: Bárbara Fernandes <barbara.fernandes@usp.br>
Signed-off-by: Wilson Sales <spoonm@spoonm.org>
Co-developed-by: Wilson Sales <spoonm@spoonm.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sven Van Asbroeck [Fri, 24 May 2019 19:10:13 +0000 (15:10 -0400)]
MAINTAINERS: Add entry for anybuss drivers
Add myself as the maintainer of the anybuss bus driver, and its client
drivers.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Van Asbroeck [Fri, 24 May 2019 19:10:12 +0000 (15:10 -0400)]
MAINTAINERS: Add entry for fieldbus subsystem
Add myself as the maintainer of the fieldbus subsystem.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:43 +0000 (14:51 +0200)]
staging: kpc2000: remove unnecessary oom message
Fixes checkpatch.pl warning "Possible unnecessary 'out of memory'
message".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:42 +0000 (14:51 +0200)]
staging: kpc2000: remove unnecessary include in cell_probe.c
Fixes checkpatch.pl warning "Use #include <linux/io.h> instead of
<asm/io.h>".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:41 +0000 (14:51 +0200)]
staging: kpc2000: remove unnecessary braces in cell_probe.c
Fixes checkpatch.pl warnings "braces {} are not necessary for single
statement blocks".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:40 +0000 (14:51 +0200)]
staging: kpc2000: use kzalloc(sizeof(var)...) in cell_probe.c
Fixes checkpatch.pl warning "Prefer kzalloc(sizeof(*kudev)...) over
kzalloc(sizeof(struct kpc_uio_device)...)"
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:39 +0000 (14:51 +0200)]
staging: kpc2000: remove extra blank lines in cell_probe.c
Fixes checkpatch.pl warnings "Please don't use multiple blank lines".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:38 +0000 (14:51 +0200)]
staging: kpc2000: fix alignment issues in cell_probe.c
Fixes checkpatch.pl warnings "Alignment should match open parenthesis"
and "Lines should not end with a '('".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:37 +0000 (14:51 +0200)]
staging: kpc2000: add missing asterisk in comment
Fixes checkpatch.pl error "code indent should use tabs where possible".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:36 +0000 (14:51 +0200)]
staging: kpc2000: use __func__ in debug messages
Fixes checkpatch.pl warning "Prefer using '"%s...", __func__' to using
'<function name>', this function's name, in a string".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Thu, 23 May 2019 12:51:35 +0000 (14:51 +0200)]
staging: kpc2000: add blank line after declarations
Fixes checkpatch.pl warning "Missing a blank line after declarations".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishka Dasgupta [Thu, 23 May 2019 12:53:41 +0000 (18:23 +0530)]
staging: pi433: Remove unnecessary variable
The variable retval is assigned constant values twice, and can therefore
be replaced by its values.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Wed, 22 May 2019 20:58:49 +0000 (22:58 +0200)]
staging: kpc2000: remove invalid spaces in cell_probe.c
Fixes checkpatch.pl error "space prohibited before/after that
parenthesis".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Wed, 22 May 2019 20:58:48 +0000 (22:58 +0200)]
staging: kpc2000: add space after comma in cell_probe.c
Fixes checkpatch.pl error "space required after that ','".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Wed, 22 May 2019 20:58:47 +0000 (22:58 +0200)]
staging: kpc2000: add spaces around operators in cell_probe.c
Fixes checkpatch.pl warning "spaces preferred around that <op>".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Wed, 22 May 2019 20:58:46 +0000 (22:58 +0200)]
staging: kpc2000: fix invalid linebreaks in cell_probe.c
Fixes checkpatch.pl error "else should follow close brace '}'" and
"trailing statements should be on next line".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Wed, 22 May 2019 20:58:45 +0000 (22:58 +0200)]
staging: kpc2000: add space between ) and { in cell_probe.c
Fixes checkpatch.pl error "space required before the open brace '{'".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Sandström [Wed, 22 May 2019 20:58:44 +0000 (22:58 +0200)]
staging: kpc2000: fix indent in cell_probe.c
Use tabs instead of spaces for indentation.
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hariprasad Kelam [Thu, 23 May 2019 02:50:59 +0000 (08:20 +0530)]
staging: rtl8723bs: core: rtw_recv: fix warning Comparison to NULL
fix below warning reported by checkpatch
CHECK: Comparison to NULL could be written
"!precvpriv->pallocated_frame_buf"
CHECK: Comparison to NULL could be written "padapter"
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
-----
changes in v2:
Corected few erorrs like (!*psta == NULL) pointed in
review
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbuild test robot [Wed, 22 May 2019 19:58:15 +0000 (03:58 +0800)]
staging: kpc2000: kpc_i2c: fix platform_no_drv_owner.cocci warnings
drivers/staging/kpc2000/kpc2000_i2c.c:652:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Fixes:
43ad38191816 ("staging: kpc2000: kpc_i2c: add static qual to local symbols in kpc_i2c.c")
CC: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hariprasad Kelam [Wed, 22 May 2019 17:05:30 +0000 (22:35 +0530)]
staging: unisys: visornic: Replace GFP_ATOMIC with GFP_KERNEL
As per below information
GFP_KERNEL FLAG
This is a normal allocation and might block. This is the flag to use in
process context code when it is safe to sleep.
GFP_ATOMIC FLAG
The allocation is high-priority and does not sleep. This is the flag to
use in interrupt handlers, bottom halves and other situations where you
cannot sleep
And we can take advantage of GFP_KERNEL , as when system is in low
memory chances of getting success is high compared to GFP_ATOMIC.
As visornic_probe is in process context we can use GPF_KERNEL.
Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Wed, 22 May 2019 12:14:02 +0000 (12:14 +0000)]
staging: kpc2000: kpc_i2c: add static qual to local symbols in kpc_i2c.c
kpc_i2c.c declares:
- two functions
- pi2c_probe()
- pi2c_remove()
- one struct
- i2c_plat_driver_i
which are local to the file, yet missing the static qualifier. Add the
static qualifier to these symbols.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Wed, 22 May 2019 12:14:01 +0000 (12:14 +0000)]
staging: kpc2000: kpc_i2c: Remove unnecessary function tracing prints
Many of the functions in kpc_i2c log debug-level messages to the
kernel log message buffer upon invocation. This is unnecessary, as
debugging tools like kgdb, kdb, etc. or the tracing tool ftrace
should be able to provide this same information. Therefore, remove
these print statements.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Wed, 22 May 2019 12:14:00 +0000 (12:14 +0000)]
staging: kpc2000: kpc_i2c: use <linux/io.h> instead of <asm/io.h>
Rather than include asm/io.h, include linux/io.h. Issue reported
by the script checkpatch.pl.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Wed, 22 May 2019 12:13:59 +0000 (12:13 +0000)]
staging: kpc2000: kpc_i2c: newline fixups to meet linux style guide
The linux coding style document states:
1) That braces should not be used where a single single statement
will do. Therefore all instances of single block statements
wrapped in braces that do not meet the qualifications of any
of the exceptions to the rule should be fixed up.
2) That the declaration of variables local to a given function
should be immediately followed by a blank newline. Therefore,
the single instance of this in kpc2000_i2c.c should be fixed
up.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Wed, 22 May 2019 12:13:58 +0000 (12:13 +0000)]
staging: kpc2000: kpc_i2c: remove unused module param disable_features
The module parameter 'disable_features' is currently unused. Therefore,
it should be removed.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Tue, 21 May 2019 17:42:21 +0000 (10:42 -0700)]
staging: rtl8192u: Remove an unnecessary NULL check
Clang warns:
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2663:47: warning:
address of array 'param->u.wpa_ie.data' will always evaluate to 'true'
[-Wpointer-bool-conversion]
(param->u.wpa_ie.len && !param->u.wpa_ie.data))
~~~~~~~~~~~~~~~~~^~~~
This was exposed by commit
deabe03523a7 ("Staging: rtl8192u: ieee80211:
Use !x in place of NULL comparisons") because we disable the warning
that would have pointed out the comparison against NULL is also false:
drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c:2663:46: warning:
comparison of array 'param->u.wpa_ie.data' equal to a null pointer is
always false [-Wtautological-pointer-compare]
(param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
~~~~~~~~~~~~~~~~^~~~ ~~~~
Remove it so clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/487
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 10:35:24 +0000 (11:35 +0100)]
staging: kpc2000: removed superfluous NULL checks from device attribute call-backs.
All the attribute show call-backs check whether pcard is NULL. However,
pci_set_drvdata(pdev, pcard) is called before the sysfs files are
created during probe, and pci_set_drvdata(pdev, NULL) is not called
until after they are destroyed during remove; therefore, pcard will not
be NULL, and we can drop the checks.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 10:35:23 +0000 (11:35 +0100)]
staging: kpc2000: simplified kp2000_device retrieval in device attribute call-backs.
All the call-backs used the same formula to retrieve the pcard from dev:
struct pci_dev *pdev = to_pci_dev(dev);
struct kp2000_device *pcard;
if (!pdev)
return NULL;
pcard = pci_get_drvdata(pdev);
Since to_pci_dev is a wrapper for container_of, it will not return NULL,
and since pci_get_drvdata just calls dev_get_drvdata on the dev member
of pdev, this is equivalent to:
struct kp2000_device *pcard = dev_get_drvdata(&(container_of(dev, struct pci_dev, dev)->dev));
and we can simplify it to:
struct kp2000_device *pcard = dev_get_drvdata(dev);
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 10:35:22 +0000 (11:35 +0100)]
staging: kpc2000: use IDA to assign card numbers.
Previously the next card number was assigned from a static int local
variable. Replaced it with an IDA. Avoids the assignment of ever-
increasing card-numbers by allowing them to be reused.
Updated TODO.
Corrected format-specifier for unsigned pcard->card_num.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 10:35:21 +0000 (11:35 +0100)]
staging: kpc2000: added separate show functions for readable kp device attributes, defined them as read-only, and declared them static.
Defined separate simple show functions for each attribute instead of
having a one big one containing a chain of conditionals.
Replaced calls to scnprintf with sprintf since all the outputs are
single integers.
All the readable device attributes are read-only, so used DEVICE_ATTR_RO
to define them.
The definitions are only used to populate the kp_attr_list attribute
array, so declared them as static.
Fixes the following sparse warnings:
drivers/staging/kpc2000/kpc2000/core.c:152:1: warning: symbol 'dev_attr_ssid' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:153:1: warning: symbol 'dev_attr_ddna' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:154:1: warning: symbol 'dev_attr_card_id' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:155:1: warning: symbol 'dev_attr_hw_rev' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:156:1: warning: symbol 'dev_attr_build' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:157:1: warning: symbol 'dev_attr_build_date' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:158:1: warning: symbol 'dev_attr_build_time' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:159:1: warning: symbol 'dev_attr_cpld_reg' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/core.c:161:1: warning: symbol 'dev_attr_cpld_reconfigure' was not declared. Should it be static?
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 10:35:20 +0000 (11:35 +0100)]
staging: kpc2000: added a helper to get struct kp2000_device from struct device.
The attribute call-backs all use the same formula to get the pcard from
dev:
struct pci_dev *pdev = to_pci_dev(dev);
struct kp2000_device *pcard;
if (!pdev)
return -ENXIO;
pcard = pci_get_drvdata(pdev);
if (!pcard)
return -ENXIO;
Added a function to reduce the duplicated code.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 10:35:19 +0000 (11:35 +0100)]
staging: kpc2000: improved formatting of core.c.
* Indented with tabs.
* Broke lines over 80 columns where possible.
* Removed braces from one-statement blocks.
* Tidied up some comments.
* Removed multiple blank lines.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Tue, 21 May 2019 19:54:12 +0000 (21:54 +0200)]
staging: rtl8723bs: Fix Coverity warning in rtw_dbg_port()
Fix the following Coverity warning:
File: drivers/staging/rtl8723bs/os_dep/ioctl_linux.c in function
rtw_dbg_port():
CID 18480: Operands don't affect result (CONSTANT_EXPRESSION_RESULT)
dead_error_condition: The condition (extra_arg & 7U) > 7U cannot be true.
if ((extra_arg & 0x07) > 0x07)
padapter->driver_ampdu_spacing = 0xFF;
else
padapter->driver_ampdu_spacing = extra_arg;
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Tue, 21 May 2019 13:17:06 +0000 (14:17 +0100)]
staging: wilc1000: remove redundant masking of pkt_offset
The masking update of pkg_offset is redundant as the updated
value is never read and pkg_offset is re-assigned on the next
iteration of the loop. Clean this up by removing the redundant
assignment.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Van Asbroeck [Tue, 21 May 2019 18:29:32 +0000 (14:29 -0400)]
staging: fieldbus: arcx-anybus: change custom -> mmio regmap
The arcx-anybus's registers are accessed via a memory-mapped
IO region. A regmap associated with this region is created
using custom reg_read() / reg_write() callbacks.
However, an abstraction which creates a memory-mapped IO
region backed regmap already exists: devm_regmap_init_mmio().
Replace the custom regmap with the existing kernel abstraction.
As a pleasant side-effect, sparse warnings now disappear.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Tue, 21 May 2019 14:32:25 +0000 (20:02 +0530)]
Staging: rtl8188eu: core: Use !x in place of NULL comparisons
Change (x == NULL) to !x and (x != NULL) to x, to fix
following checkpatch.pl warnings:
CHECK: Comparison to NULL could be written "!x".
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Tue, 21 May 2019 14:16:42 +0000 (19:46 +0530)]
Staging: rtl8188eu: os_dep: Replace comparison with zero to !x
Change comparison to zero to !x.
Replace (x == 0) to !x.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Tue, 21 May 2019 14:07:11 +0000 (19:37 +0530)]
Staging: rtl8192u: ieee80211: Replace function names in strings with "%s", __func__
Use "%s", __func__ in place of strings which contain function names.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Tue, 21 May 2019 13:30:12 +0000 (19:00 +0530)]
Staging: rtl8723bs: os_dep: Remove functions that don't do anything.
Remove functions which just print the name of function and return 0,
These functions fake the network core to say that they support these
options.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 07:56:29 +0000 (08:56 +0100)]
staging: kpc2000: removed two kpc_uio_class device attributes.
The show functions of two attributes output nothing and they are unused.
Removed them.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Reported-by: Matt Sickler <matt.sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeremy Sowden [Tue, 21 May 2019 07:56:28 +0000 (08:56 +0100)]
staging: kpc2000: added separate show functions for kpc_uio_class device attributes, defined them as read-only and declared them static.
Defined separate simple show functions for each attribute instead of
having a one big one containing a chain of conditionals.
Replaced scnprintf calls with sprintf since all the outputs are short
bounded strings or single integers.
All of the device attributes are read-only, so used DEVICE_ATTR_RO to
define them.
The definitions are only used to populate the kpc_uio_class_attrs
attribute array, so declared them as static.
Fixes the following sparse warnings:
drivers/staging/kpc2000/kpc2000/cell_probe.c:220:1: warning: symbol 'dev_attr_offset' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:221:1: warning: symbol 'dev_attr_size' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:222:1: warning: symbol 'dev_attr_type' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:223:1: warning: symbol 'dev_attr_s2c_dma' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:224:1: warning: symbol 'dev_attr_c2s_dma' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:225:1: warning: symbol 'dev_attr_irq_count' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:226:1: warning: symbol 'dev_attr_irq_base_num' was not declared. Should it be static?
drivers/staging/kpc2000/kpc2000/cell_probe.c:227:1: warning: symbol 'dev_attr_core_num' was not declared. Should it be static?
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishka Dasgupta [Tue, 21 May 2019 06:40:35 +0000 (12:10 +0530)]
staging: rtl8723bs: hal: Remove unused variable
Remove local variable psdio which is declared but not used (or returned)
in its function.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishka.dasgupta@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:05 +0000 (16:39 +0000)]
staging: vt6656: manage error path during device initialization
Check for error during device initialization callback and return a
meaningful error code or zero on success.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:04 +0000 (16:39 +0000)]
staging: vt6656: clean-up registers initialization error path
Avoid discarding function's return code during register initialization.
Handle it instead and return 0 on success or a negative errno value on
error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:04 +0000 (16:39 +0000)]
staging: vt6656: use meaningful error code during buffer allocation
Check on called function's returned value for error and return 0 on
success or a negative errno value on error instead of a boolean value.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:03 +0000 (16:39 +0000)]
staging: vt6656: clean error path for firmware management
Avoid discarding return value of functions called during firmware
management process. Handle such return value and return 0 on success or
a negative errno value on error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:02 +0000 (16:39 +0000)]
staging: vt6656: avoid discarding called function's return code
Change some of the driver's functions in order to handle error codes
instead of discarding them. These function now returns 0 on success and
a negative errno value on error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:01 +0000 (16:39 +0000)]
staging: vt6656: clean function's error path in usbpipe.c
Avoid discarding called function's returned value. Store it instead in
order to act accordingly.
Update error path to return 0 on success and a negative errno value on
error.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Deslandes [Mon, 20 May 2019 16:39:01 +0000 (16:39 +0000)]
staging: vt6656: fix potential NULL pointer dereference
vnt_free_tx_bufs() relies on priv->tx_context elements to be NULL if
they are not initialized (as vnt_free_rx_bufs() does). Add a check to
these elements in order to avoid NULL pointer dereference.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Mon, 20 May 2019 18:20:59 +0000 (23:50 +0530)]
Staging: rtl8192u: ieee80211: Fix if-else coding style issue
Fix following checkpatch.pl warning by adding braces around if
statement:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Mon, 20 May 2019 17:58:51 +0000 (23:28 +0530)]
Staging: rtl8188eu: core: Remove else after break
Remove else after break statements to fix following checkpatch.pl
warnings:
WARNING: else is not generally useful after a break or return.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yannick Loeck [Mon, 20 May 2019 15:28:52 +0000 (17:28 +0200)]
staging: pi433: fix misspelling of packet
Fixes the misspelling of packet in
<MASK_PACKETCONFIG1_PAKET_FORMAT_VARIABLE>
Signed-off-by: Yannick Loeck <yannick.loeck@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:16 +0000 (10:47 +0200)]
staging: kpc2000: remove SetBackEndControl() function
As this is only called twice, just call writel() like a normal driver
should :)
At the same time, clean up the formatting for the irq handler, as there
is no need to have that be incorrect, it just hurts the eyes...
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:15 +0000 (10:47 +0200)]
staging: kpc2000: dma_common_defs.h: remove unused inline functions
The functions GetBackEndStatus() and BackEndControlSetClear() are never
used by any code, so just remove them.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:14 +0000 (10:47 +0200)]
staging: kpc2000: move the i2c driver out of its subdirectory
There is no need for a subdirectory for just a single .c file. So move
it out of kpc_i2c/ and rename it to the module name that we want the
file to build to, saving one more linking stage.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:13 +0000 (10:47 +0200)]
staging: kpc2000: move the spi driver out of its subdirectory
There is no need for a subdirectory for just a single .c file. So move
it out of kpc_spi/ and rename it to the module name that we want the
file to build to, saving one more linking stage.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:12 +0000 (10:47 +0200)]
staging: kpc2000: remove spi_parts.h
The structures defined in spi_parts.h belong in the .c file that uses
it. So move it directly into spi_driver.c to make things simpler to
manage.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:11 +0000 (10:47 +0200)]
staging: kpc2000: fix coding style in pcie.h
Use tabs in pcie.h, like is mandated.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 20 May 2019 08:47:10 +0000 (10:47 +0200)]
staging: kpc2000: remove fileops.c file.
The fileops.c file does not need to be stand-alone, so move it into the
core.c file. This lets us make some functions static, reducing the
global namespace of the driver.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Sun, 19 May 2019 17:00:32 +0000 (22:30 +0530)]
Staging: mt7621-dma: Remove braces around single if statement
Fix following checkpatch.pl warning by removing unnecessary braces:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moses Christopher [Sat, 18 May 2019 06:33:41 +0000 (12:03 +0530)]
staging: vt665*: use help instead of ---help--- in Kconfig
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moses Christopher [Sat, 18 May 2019 06:33:40 +0000 (12:03 +0530)]
staging: rtl8723bs: use help instead of ---help--- in Kconfig
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moses Christopher [Sat, 18 May 2019 06:33:39 +0000 (12:03 +0530)]
staging: rtl8188eu: use help instead of ---help--- in Kconfig
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moses Christopher [Sat, 18 May 2019 06:33:38 +0000 (12:03 +0530)]
staging: unisys: use help instead of ---help--- in Kconfig
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moses Christopher [Sat, 18 May 2019 06:33:37 +0000 (12:03 +0530)]
staging: most: use help instead of ---help--- in Kconfig
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moses Christopher [Sat, 18 May 2019 06:33:36 +0000 (12:03 +0530)]
staging: fsl-dpaa2: use help instead of ---help--- in Kconfig
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Sat, 18 May 2019 02:30:00 +0000 (02:30 +0000)]
staging: kpc2000: kpc_i2c: fixup block comment style in i2c_driver.c
Throughout i2c_driver.c, there are numerous deviations from the two
standards of:
- placing a '*' at the beginning of every line containing a
block comment.
- placing the closing comment marker '*/' on a new line.
Instead, use a block comment style that is more consistent with the
prescribed guidelines.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Sat, 18 May 2019 02:29:59 +0000 (02:29 +0000)]
staging: kpc2000: kpc_i2c: use %s with __func__ identifier in log messages
Throughout i2c_driver.c, there are instances where the log strings
contain the function's name hardcoded into the string. Instead, use the
printk conversion specifier '%s' with the __func__ preprocessor
identifier to more maintainably print the function's name.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Sat, 18 May 2019 02:29:58 +0000 (02:29 +0000)]
staging: kpc2000: kpc_i2c: prevent memory leak in probe() error case
The probe() function performs a kzalloc to dynamically allocate memory
at runtime. If the allocation succeeds, yet invoking the function
i2c_add_adapter fails, the dynamically allocated memory is never freed.
Change the allocation to use the managed allocation API instead and
remove the manual freeing of the memory in the remove() function.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Sat, 18 May 2019 02:29:57 +0000 (02:29 +0000)]
staging: kpc2000: kpc_i2c: reformat copyright for better readability
The copyright header in i2c_driver.c is difficult to read and not
chronologically ordered. Reformat and reorganize the copyright header
to be similar to other drivers in the i2c subsystem.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Geordan Neukum [Sat, 18 May 2019 02:29:56 +0000 (02:29 +0000)]
staging: kpc2000: kpc_i2c: reindent i2c_driver.c
i2c_driver.c uses a mixture of space and tab indentations which
conflicts with the kernel coding style guide. Reindent i2c_driver.c.
Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 17 May 2019 08:49:39 +0000 (10:49 +0200)]
staging: kpc2000: remove lock_card/unlock_card functions
We do not need an inline function to "hide" the lock, so just replace
the few calls to these functions with the "real" mutex_lock/unlock()
calls.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 17 May 2019 08:49:37 +0000 (10:49 +0200)]
staging: kpc2000: remove kp200_module.c file
The kp200_module.c does not need to be stand-alone, so move it into the
core.c file. This lets us make some functions static, reducing the
global namespace of the driver.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Fri, 17 May 2019 08:49:35 +0000 (10:49 +0200)]
staging: kpc2000: fix coding style in uapi.h
Use tabs in uapi.h, like is mandated.
Cc: Matt Sickler <Matt.Sickler@daktronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oscar Gomez Fuente [Fri, 17 May 2019 17:49:56 +0000 (19:49 +0200)]
staging: fieldbus: solve warning incorrect type dev_core.c
These changes solve a warning realated to an incorrect type inilizer in the function
fieldbus_poll.
Signed-off-by: Oscar Gomez Fuente <oscargomezf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Puranjay Mohan [Fri, 17 May 2019 17:29:30 +0000 (22:59 +0530)]
Staging: rtl8192u: ieee80211: Use !x in place of NULL comparisons
Fix the following checkpatch.pl warning :
CHECK: Comparison to NULL could be written "!x"
by changing (x == NULL) to !x and (x != NULL) to x.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeeeun Evans [Fri, 17 May 2019 17:14:48 +0000 (18:14 +0100)]
staging: rtl8723bs: Fix boolinit.cocci warnings
This patch removes unnecessary comparisons to bool.
Issue found by coccinelle:
drivers/staging/rtl8723bs/core/rtw_ap.c:2159:5-11: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_cmd.c:1741:7-17: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_ioctl_set.c:360:5-15: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_ioctl_set.c:360:28-39: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_mlme.c:1675:6-10: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c:6766:8-21: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_pwrctrl.c:181:5-40: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_wlan_util.c:748:14-42: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_xmit.c:2429:15-47: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_xmit.c:2458:7-17: WARNING: Comparison to bool
drivers/staging/rtl8723bs/core/rtw_xmit.c:2524:8-18: WARNING: Comparison to bool
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:1653:13-36: WARNING: Comparison to bool
Signed-off-by: Jeeeun Evans <jeeeunevans@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>