Nicholas Clark [Mon, 11 Dec 2006 21:52:12 +0000 (21:52 +0000)]
Fix typo in change 29518 which broke non-debugging builds.
(Here Mark, you can have the spare ; back again)
p4raw-id: //depot/perl@29523
Nicholas Clark [Mon, 11 Dec 2006 21:21:09 +0000 (21:21 +0000)]
Convert the -1 to a more explicit PERL_FBM_FLAGS_OFFSET_FROM_TABLE.
p4raw-id: //depot/perl@29522
Nicholas Clark [Mon, 11 Dec 2006 21:15:06 +0000 (21:15 +0000)]
Assert that BmRARE() BmPREVIOUS() and BmUSEFUL() are only called on
valid PVBMs.
p4raw-id: //depot/perl@29521
Nicholas Clark [Mon, 11 Dec 2006 20:55:20 +0000 (20:55 +0000)]
Rename FBM_TABLE_OFFSET to PERL_FBM_TABLE_OFFSET prior to moving it
to a header.
p4raw-id: //depot/perl@29520
Rafael Garcia-Suarez [Mon, 11 Dec 2006 18:33:21 +0000 (18:33 +0000)]
Don't load the Win32 module on non-win32 platforms
p4raw-id: //depot/perl@29519
Nicholas Clark [Mon, 11 Dec 2006 18:26:31 +0000 (18:26 +0000)]
Change SvTAIL() to check that both SVpbm_TAIL|SVpbm_VALID are true.
SVpbm_VALID is the same bit value is SVf_IVisUV, which means that
PVBMs can't actually ever be IOK. Therefore move BmUSEFUL() into the
IV union, and save one I32 per PVBM.
p4raw-id: //depot/perl@29518
Rafael Garcia-Suarez [Mon, 11 Dec 2006 17:09:17 +0000 (17:09 +0000)]
Changes and README are not needed for Switch.pm
p4raw-id: //depot/perl@29516
Rafael Garcia-Suarez [Mon, 11 Dec 2006 16:53:58 +0000 (16:53 +0000)]
As pointed out by Valentin Guignon, there is most
probably one \n too many in the end-of-pod marker.
p4raw-id: //depot/perl@29515
Rafael Garcia-Suarez [Mon, 11 Dec 2006 16:49:06 +0000 (16:49 +0000)]
Configure needs to know about the extensions IO/Compress/Base
and IO/Compress/Zlib, so they get built.
p4raw-id: //depot/perl@29514
Rafael Garcia-Suarez [Mon, 11 Dec 2006 16:16:46 +0000 (16:16 +0000)]
Move files from ext/Compress/IO to ext/IO/Compress
p4raw-id: //depot/perl@29513
Bo Lindbergh [Sat, 9 Dec 2006 12:17:53 +0000 (13:17 +0100)]
Re: [PATCH] Deparse.pm bugfix
Message-Id: <
A4BDE74B-DB3A-41C0-B2BE-
FCEE0E15AB54@hagernas.com>
p4raw-id: //depot/perl@29512
Jan Dubois [Sun, 10 Dec 2006 11:47:58 +0000 (03:47 -0800)]
re: [PATCH] Move Win32::* functions from win32/win32.c to ext/Win32/Win32.xs
Message-ID: <9moon29qtn5c23t9fer229ealsu06bkf11@4ax.com>
p4raw-id: //depot/perl@29511
Jan Dubois [Fri, 8 Dec 2006 19:07:06 +0000 (11:07 -0800)]
Second patch from:
Subject: [PATCH] Move Win32::* functions from win32/win32.c to ext/Win32/Win32.xs
Message-ID: <lc9kn2tb0p5sdd4q69rbc7067r4imar59r@4ax.com>
p4raw-id: //depot/perl@29510
Jan Dubois [Fri, 8 Dec 2006 19:07:06 +0000 (11:07 -0800)]
First patch from:
Subject: [PATCH] Move Win32::* functions from win32/win32.c to ext/Win32/Win32.xs
Message-ID: <lc9kn2tb0p5sdd4q69rbc7067r4imar59r@4ax.com>
p4raw-id: //depot/perl@29509
Dave Mitchell [Mon, 11 Dec 2006 11:41:10 +0000 (11:41 +0000)]
remove extraneous debugging code introduced by #29504
p4raw-id: //depot/perl@29508
Jerrad Pierce [Sun, 10 Dec 2006 14:38:18 +0000 (09:38 -0500)]
Fatal v1.03
Message-Id: <
200612101938.kBAJcI9D008026@all-night-tool.mit.edu>
Allow to make fatal built-ins in CORE::GLOBAL
p4raw-id: //depot/perl@29507
Marcus Holland-Moritz [Sun, 10 Dec 2006 22:32:32 +0000 (23:32 +0100)]
Re: [perl #41065] Out of memory!, while extending scalar
Message-ID: <
20061210223232.
0f3a5318@r2d2>
p4raw-id: //depot/perl@29506
Rafael Garcia-Suarez [Mon, 11 Dec 2006 09:41:45 +0000 (09:41 +0000)]
perlhack.pod nit by Jarkko
p4raw-id: //depot/perl@29505
Dave Mitchell [Mon, 11 Dec 2006 00:48:06 +0000 (00:48 +0000)]
fix eval qw(BEGIN{die}) style leaks (second attempt).
Repeat of change #28319 (backed out by change #28720), this time
freeing ops using the right pad. Also backs out the remempad
parser addition from change #29501; instead a new auxiliary
paser stack is added, which records the current value of
PL_comppad for every state.
p4raw-link: @29501 on //depot/perl:
2af555bf3f2b3ca8e114df3f5f680d40bd24d6bf
p4raw-link: @28720 on //depot/perl:
c86b7e916b443ee192c5638ad9d077ad4e244713
p4raw-link: @28319 on //depot/perl:
eb7d7d25d2f780edcbedc124a5bdca0d53ad8687
p4raw-id: //depot/perl@29504
Nicholas Clark [Sun, 10 Dec 2006 23:05:25 +0000 (23:05 +0000)]
Remove code duplication in S_to_utf8_substr() and S_to_byte_substr()
by taking advantage of how anchored_* and float_* are stored in arrays
to use a loop.
p4raw-id: //depot/perl@29503
Nicholas Clark [Sun, 10 Dec 2006 22:31:56 +0000 (22:31 +0000)]
Downgrading a fixed or floating substring of a pattern whilst matching
a studied string seems to get to a "should not happen" [bug #41067]
It seems that Perl_regexec_flags() assumes that if the pre-downgraded
substring is FBM compiled, then the downgraded version will be too,
hence changing the downgrade and upgrade routines to FBM compile seems
to be a correct fix.
p4raw-id: //depot/perl@29502
Dave Mitchell [Sun, 10 Dec 2006 18:50:05 +0000 (18:50 +0000)]
#28315 could crash when freeing ops with different pads
Add hook to parser to record current PL_comppad, then use this
when popping ops off the parser stack after parser error
p4raw-id: //depot/perl@29501
Dave Mitchell [Sun, 10 Dec 2006 17:18:00 +0000 (17:18 +0000)]
parser: expand yy_is_opval[] to include all value types
and rename to yy_type_tab[]. Then use this table to improve stack
dumping with -Dpv
p4raw-id: //depot/perl@29500
Graham Barr [Sun, 10 Dec 2006 16:28:34 +0000 (16:28 +0000)]
Restore change 27486 accidently removed (also added to 1.19 before release)
p4raw-id: //depot/perl@29499
Graham Barr [Sun, 10 Dec 2006 16:17:14 +0000 (16:17 +0000)]
Upgrade to Scalar-List-Utils-1.19
p4raw-id: //depot/perl@29498
Ilya Zakharevich [Sat, 9 Dec 2006 16:33:41 +0000 (08:33 -0800)]
Re: [PATCH 5.8.8] Build on OS/2 - missing part
Message-ID: <
20061210003341.GA14200@powdermilk.math.berkeley.edu>
p4raw-id: //depot/perl@29497
Nicholas Clark [Sun, 10 Dec 2006 01:13:09 +0000 (01:13 +0000)]
Swap SVpbm_TAIL and SVpbm_VALID.
p4raw-id: //depot/perl@29496
Steve Peters [Sat, 9 Dec 2006 22:44:27 +0000 (22:44 +0000)]
Upgrade to Time-HiRes-1.9703
p4raw-id: //depot/perl@29495
Nicholas Clark [Sat, 9 Dec 2006 21:19:45 +0000 (21:19 +0000)]
PVBMs mustn't enter anything that turns SVIVisUV_on().
p4raw-id: //depot/perl@29494
Nicholas Clark [Sat, 9 Dec 2006 21:17:37 +0000 (21:17 +0000)]
Exterminate! 2 pieces of superfluous code related to UV setting.
p4raw-id: //depot/perl@29493
Nicholas Clark [Fri, 8 Dec 2006 23:49:51 +0000 (23:49 +0000)]
In Perl_fbm_instr(), no need to calculate the address of the table if
we're going to return anyway.
p4raw-id: //depot/perl@29492
Nicholas Clark [Fri, 8 Dec 2006 23:22:31 +0000 (23:22 +0000)]
assert that SvTAIL() isn't being called on PVAVs or PVHVs
p4raw-id: //depot/perl@29491
Nicholas Clark [Fri, 8 Dec 2006 22:56:54 +0000 (22:56 +0000)]
Wrap some macro arguments in () to avoid precedence problems.
p4raw-id: //depot/perl@29490
Nicholas Clark [Fri, 8 Dec 2006 22:56:08 +0000 (22:56 +0000)]
Perl_screaminstr() must be called with littlestr as a PVBM.
p4raw-id: //depot/perl@29489
Dave Mitchell [Fri, 8 Dec 2006 22:20:41 +0000 (22:20 +0000)]
add missing OP_REFCNT_LOCK/UNLOCKs and document it
p4raw-id: //depot/perl@29488
Nicholas Clark [Fri, 8 Dec 2006 22:11:56 +0000 (22:11 +0000)]
Assert that BmRARE, BmUSEFUL and BmPREVIOUS are only called on SVtPVBM
p4raw-id: //depot/perl@29487
Nicholas Clark [Fri, 8 Dec 2006 21:09:57 +0000 (21:09 +0000)]
No need to upgrade if all we're going to do is return.
p4raw-id: //depot/perl@29486
Steve Hay [Thu, 7 Dec 2006 12:34:10 +0000 (12:34 +0000)]
Make use of $Config{d_pseudofork} in a couple of core tests
Can't really use it in ext/IO/t/*.t and lib/Test/Simple/t/fork.t
because they are dual-lived modules and must work with older perls
that don't have d_pseudofork
p4raw-id: //depot/perl@29485
Jan Dubois [Wed, 6 Dec 2006 16:31:42 +0000 (08:31 -0800)]
Move Win32 from win32/ext/Win32 to ext/Win32
Message-ID: <1unen2lsrq4pnnt06933h96pqj1d8luh3b@4ax.com>
p4raw-id: //depot/perl@29483
Jerry D. Hedden [Wed, 6 Dec 2006 11:12:13 +0000 (03:12 -0800)]
Perl_save_destructor is not a mathom
From: "Jerry D. Hedden" <jdhedden@yahoo.com>
Message-ID: <
20061206191213.35036.qmail@web30206.mail.mud.yahoo.com>
p4raw-id: //depot/perl@29482
Jan Dubois [Wed, 6 Dec 2006 16:26:38 +0000 (08:26 -0800)]
Makefile.PL changes to compiler Win32.xs using cygwin
Message-ID: <5nnen2p2h4lhremj0qf1tmpkl0asvk87hr@4ax.com>
p4raw-id: //depot/perl@29481
Steve Hay [Wed, 6 Dec 2006 17:28:03 +0000 (17:28 +0000)]
Better fix than #29479 for exporting refcounted_he_chain_2hv
p4raw-id: //depot/perl@29480
Yves Orton [Wed, 6 Dec 2006 17:52:08 +0000 (18:52 +0100)]
Re: [PATCH] User pragmas now accessible from B
Message-ID: <9b18b3110612060852s7cfbba66id5aae25e5bb20ae0@mail.gmail.com>
p4raw-id: //depot/perl@29479
Steve Hay [Wed, 6 Dec 2006 14:19:55 +0000 (14:19 +0000)]
Upgrade to Time-HiRes 1.9702
p4raw-id: //depot/perl@29478
Jarkko Hietaniemi [Tue, 5 Dec 2006 16:08:33 +0000 (11:08 -0500)]
Re: When should PERL_SYS_TERM() be called? [was: Re: [PATCH] Re: [PATCH] Re: [PATCH] abstract mempool header testing]
Message-ID: <
4575DFD1.1060108@iki.fi>
Fixes a problem spotted by Jan Dubois:
The PerlMemShared pool is only shared between the interpreters that
can share data structures (interpreters created by perl_clone(), which
mean pseudo-fork, and threads.xs). The pool is not shared between
interpreters that are created separately by perl_alloc().
[...]
I guess this means PL_perlio_fd_refcnt needs to be allocated and
freed by standard malloc() and not go through any abstraction.
p4raw-id: //depot/perl@29477
Rafael Garcia-Suarez [Wed, 6 Dec 2006 13:26:18 +0000 (13:26 +0000)]
save_I8 is not a mathom.
p4raw-id: //depot/perl@29476
Joshua ben Jore [Tue, 5 Dec 2006 13:18:21 +0000 (05:18 -0800)]
User pragmas now accessible from B
From: "Joshua ben Jore" <twists@gmail.com>
Message-ID: <dc5c751d0612051318n2e2f08bfh185fab6323a980b@mail.gmail.com>
p4raw-id: //depot/perl@29475
Craig A. Berry [Wed, 6 Dec 2006 05:29:50 +0000 (05:29 +0000)]
Avoid my_regdupe type mismatch warning after #29430
p4raw-id: //depot/perl@29474
Craig A. Berry [Wed, 6 Dec 2006 04:48:35 +0000 (04:48 +0000)]
d_pseudofork for configure.com
p4raw-id: //depot/perl@29473
Yves Orton [Tue, 5 Dec 2006 22:53:48 +0000 (23:53 +0100)]
Re: [PATCH] Further tweaks to make it easier to create regexp engine plug ins.
Message-ID: <9b18b3110612051353k7745792byabfdf98e18eb48c9@mail.gmail.com>
Fixes a minor bug in change 29468.
p4raw-id: //depot/perl@29472
Steve Peters [Tue, 5 Dec 2006 21:00:38 +0000 (21:00 +0000)]
Silence a warning from Module::CoreList that occurs when the module version is
something like X.XX_XX.
p4raw-id: //depot/perl@29471
Steve Hay [Tue, 5 Dec 2006 16:41:55 +0000 (16:41 +0000)]
Make the check for PERL_IMPLICIT_SYS better
p4raw-id: //depot/perl@29470
Steve Hay [Tue, 5 Dec 2006 16:06:31 +0000 (16:06 +0000)]
Extend d_pseudofork to Win32-land and set it when appropriate
(namely, when we have USE_ITHREADS and PERL_IMPLICIT_SYSTEM)
p4raw-id: //depot/perl@29469
Yves Orton [Tue, 5 Dec 2006 16:13:36 +0000 (17:13 +0100)]
Further tweaks to make it easier to create regexp engine plug ins.
Message-ID: <9b18b3110612050713g77cac516x46fb5baac99b47c9@mail.gmail.com>
(with tweaks)
p4raw-id: //depot/perl@29468
H.Merijn Brand [Tue, 5 Dec 2006 14:55:14 +0000 (14:55 +0000)]
Introduction of d_pseudofork
p4raw-id: //depot/perl@29467
Jarkko Hietaniemi [Mon, 4 Dec 2006 22:53:03 +0000 (17:53 -0500)]
Re: When should PERL_SYS_TERM() be called? [was: Re: [PATCH] Re: [PATCH] Re: [PATCH] abstract mempool header testing]
Message-ID: <
4574ED1F.40508@iki.fi>
Re-instates #29424 (previously reverted by #29451), now fixed to work
with PERL_IMPLICIT_SYS, thanks to Jan Dubois. Also adds PERLIO_TERM to
the Symbian port.
p4raw-id: //depot/perl@29465
Steve Hay [Tue, 5 Dec 2006 09:38:14 +0000 (09:38 +0000)]
Skip Perl_regdupe_internal rather than Perl_regdupe
when building on Win32 without ithreads (see #29430)
p4raw-id: //depot/perl@29464
Nicholas Clark [Mon, 4 Dec 2006 22:50:09 +0000 (22:50 +0000)]
Move Perl_get_db_sub() from pp_hot.c to util.c
p4raw-id: //depot/perl@29463
H.Merijn Brand [Mon, 4 Dec 2006 18:09:20 +0000 (18:09 +0000)]
Revert #29454
p4raw-id: //depot/perl@29462
Dave Mitchell [Mon, 4 Dec 2006 18:08:31 +0000 (18:08 +0000)]
fix some casting issues with perly.y / madly.y merger
p4raw-id: //depot/perl@29461
Rafael Garcia-Suarez [Mon, 4 Dec 2006 17:50:51 +0000 (17:50 +0000)]
Better version of last patch, by Yves Orton.
Actually the regexp engine structure only needs
one compilation function hook.
p4raw-id: //depot/perl@29459
Rafael Garcia-Suarez [Mon, 4 Dec 2006 17:22:02 +0000 (17:22 +0000)]
The new regexp compilation function must be added to the engine structure.
p4raw-id: //depot/perl@29458
Rafael Garcia-Suarez [Mon, 4 Dec 2006 16:24:09 +0000 (16:24 +0000)]
Actually submit previous change.
p4raw-id: //depot/perl@29457
Rafael Garcia-Suarez [Mon, 4 Dec 2006 16:15:54 +0000 (16:15 +0000)]
Split Perl_pregcomp in two functions. Patch by Audrey Tang,
to facilitate pluging in other regexp engines.
p4raw-id: //depot/perl@29456
Dave Mitchell [Mon, 4 Dec 2006 15:38:05 +0000 (15:38 +0000)]
merge perly.y and madlu.y
p4raw-id: //depot/perl@29455
Rafael Garcia-Suarez [Mon, 4 Dec 2006 15:48:12 +0000 (16:48 +0100)]
Re: install misses Compress/IO/{Base,Zlib}
From: "Rafael Garcia-Suarez" <rgarciasuarez@gmail.com>
Message-ID: <b77c1dce0612040648j411247c5i27a305c86cbac401@mail.gmail.com>
p4raw-id: //depot/perl@29454
Jos I. Boumans [Fri, 1 Dec 2006 12:24:08 +0000 (13:24 +0100)]
Add File::Fetch to the core
From: "Jos Boumans" <kane@dwim.org>
Message-ID: <22195.80.127.35.68.
1164972248.squirrel@webmail.xs4all.nl>
p4raw-id: //depot/perl@29452
Steve Hay [Mon, 4 Dec 2006 14:31:08 +0000 (14:31 +0000)]
Change #29424 may well be correct in itself, but currently doesn't
work when perl is built with PERL_IMPLICIT_SYS because PERLIO_TERM
uses PerlMemShared_free() which, in that case, involves the perlhost
that has already been freed itself by perl_free(), which is called
before PERL_SYS_TERM().
The order of perl_destruct(), perl_free(), PERL_SYS_TERM() cannot
be changed (it is advertised in perlembed for a start), so just
revert #29424 and the appropriate parts of #29442 for now.
Perhaps PL_perlio_fd_refcnt needs allocating differently, or else
the perlhost needs freeing later (after PerlIO)?
p4raw-id: //depot/perl@29451
Yves Orton [Mon, 4 Dec 2006 14:47:07 +0000 (15:47 +0100)]
Minor pod nit in perlre.
Message-ID: <9b18b3110612040547k1bcff290qb8c9b0d7c9ed9640@mail.gmail.com>
p4raw-id: //depot/perl@29450
Dave Mitchell [Mon, 4 Dec 2006 12:08:56 +0000 (12:08 +0000)]
another fix for bison 2.3
p4raw-id: //depot/perl@29449
Yitzchak Scott-Thoennes [Mon, 4 Dec 2006 03:10:31 +0000 (19:10 -0800)]
-DDEBUGGING=both doesn't set -g
From: "Yitzchak Scott-Thoennes" <sthoenna@efn.org>
Message-ID: <1176.63.226.246.123.
1165230631.squirrel@63.226.246.123>
p4raw-id: //depot/perl@29448
Chris Dolan [Sat, 2 Dec 2006 09:37:08 +0000 (03:37 -0600)]
Re: [perl #38868] Changing $0 on darwin leads to excessive padding in 'ps'
Message-Id: <
005671A0-5C2B-464C-85B9-
A91E52278194@chrisdolan.net>
p4raw-id: //depot/perl@29446
Yves Orton [Sun, 3 Dec 2006 16:55:55 +0000 (17:55 +0100)]
\R is supposed to mean something else so switch to \g and make it more useful in the process
Message-ID: <9b18b3110612030755o241e6372o9870ecce9c42e3d5@mail.gmail.com>
p4raw-id: //depot/perl@29445
Steve Peters [Mon, 4 Dec 2006 02:48:24 +0000 (02:48 +0000)]
Upgrade to Test-Simple-0.66.
p4raw-id: //depot/perl@29444
Dave Mitchell [Sun, 3 Dec 2006 22:08:57 +0000 (22:08 +0000)]
add support for bison 2.3
p4raw-id: //depot/perl@29443
Yves Orton [Sat, 2 Dec 2006 14:48:54 +0000 (15:48 +0100)]
Re: [PATCH] Re: [PATCH] Re: [PATCH] abstract mempool header testing
Message-ID: <9b18b3110612020548l7c5aefd4m19cb0b5c4395abb4@mail.gmail.com>
p4raw-id: //depot/perl@29442
Yves Orton [Thu, 30 Nov 2006 01:12:25 +0000 (02:12 +0100)]
Re: [perl #41010] (?(COND)) in pattern matching not working properly
Message-ID: <9b18b3110611291612i137803f4lab2739e3d9af40f7@mail.gmail.com>
p4raw-id: //depot/perl@29441
Dave Mitchell [Sun, 3 Dec 2006 15:52:59 +0000 (15:52 +0000)]
merge perly.c and madly.c
madly.c is now just a wrapper that #includes perly.c
p4raw-id: //depot/perl@29440
Christophe Grosjean [Sun, 3 Dec 2006 01:31:58 +0000 (02:31 +0100)]
Minor patch for Benchmark.pm
Message-Id: <
1165105918.2718.90.camel@localhost.localdomain>
p4raw-id: //depot/perl@29439
Dave Mitchell [Sat, 2 Dec 2006 18:38:35 +0000 (18:38 +0000)]
synchronise perly.c and madly.c
p4raw-id: //depot/perl@29438
Marcus Holland-Moritz [Sat, 2 Dec 2006 17:25:55 +0000 (17:25 +0000)]
Upgrade to Devel::PPPort 3.10_02
p4raw-id: //depot/perl@29437
Marcus Holland-Moritz [Sat, 2 Dec 2006 17:13:26 +0000 (17:13 +0000)]
Upgrade to Devel::PPPort 3.10_01
p4raw-id: //depot/perl@29436
Jarkko Hietaniemi [Fri, 1 Dec 2006 22:05:17 +0000 (00:05 +0200)]
perltodo.pod: add perlio todos/thinkabouts
Message-Id: <
200612012005.kB1K5Hn3448004@kosh.hut.fi>
p4raw-id: //depot/perl@29435
Nicholas Clark [Fri, 1 Dec 2006 22:51:22 +0000 (22:51 +0000)]
Make get_db_sub non-static, and call it from pp_goto, which allows the
removal of duplicate code. (The conversion of GvSV(PL_DBsub) to
GvSVn(PL_DBsub) implicit in this change should fix a failure with
Devel::SmallProf.)
p4raw-id: //depot/perl@29434
Nicholas Clark [Fri, 1 Dec 2006 22:28:11 +0000 (22:28 +0000)]
Remove the pp_entersub specific logic from S_get_db_sub.
p4raw-id: //depot/perl@29433
Joshua ben Jore [Wed, 29 Nov 2006 16:26:25 +0000 (08:26 -0800)]
Re: [PATCH] Make B::Lint use Module::Pluggable
From: "Joshua ben Jore" <twists@gmail.com>
Message-ID: <dc5c751d0611291626w51f85791h93d0c6b7d13ed4a2@mail.gmail.com>
p4raw-id: //depot/perl@29432
Rafael Garcia-Suarez [Fri, 1 Dec 2006 14:03:22 +0000 (14:03 +0000)]
Remove unused variable
p4raw-id: //depot/perl@29431
Yves Orton [Thu, 30 Nov 2006 22:06:38 +0000 (23:06 +0100)]
Continue split of perl internal regexp structures from ones that are engine specific.
Message-ID: <9b18b3110611301306p5cad5deal4aa55559b8c8defd@mail.gmail.com>
p4raw-id: //depot/perl@29430
Rafael Garcia-Suarez [Fri, 1 Dec 2006 10:28:36 +0000 (10:28 +0000)]
Verify that the debugger has an array where to store lines before
doing so. This fixes an assertion failure when parsing a script
that begins with '#!perl -d'.
Also, code factorization in toke.c.
p4raw-id: //depot/perl@29429
Rafael Garcia-Suarez [Fri, 1 Dec 2006 10:26:48 +0000 (11:26 +0100)]
Fix Time-HiRes linker error on Win32 introduced by upgrades
from version 1.94 (#29423 and #29426)
Subject: Re: Time::HiRes not happy?
From: "Rafael Garcia-Suarez" <rgarciasuarez@gmail.com>
Message-ID: <b77c1dce0612010126o799d5b8bs4ef37d22d5c7e50@mail.gmail.com>
p4raw-id: //depot/perl@29428
Steve Peters [Thu, 30 Nov 2006 14:21:40 +0000 (14:21 +0000)]
-Dprefix failed on Cygwin unless the directory ${installbin} already
existed prior to running make.
p4raw-id: //depot/perl@29427
Steve Peters [Thu, 30 Nov 2006 14:11:57 +0000 (14:11 +0000)]
Upgrade to Time-HiRes-1.96.
p4raw-id: //depot/perl@29426
Steve Hay [Thu, 30 Nov 2006 10:13:40 +0000 (10:13 +0000)]
Don't try to export fd_refcnt symbols when building without USE_PERLIO
to keep the Win32 linker happy
p4raw-id: //depot/perl@29425
Steve Hay [Thu, 30 Nov 2006 09:45:47 +0000 (09:45 +0000)]
I think #29060 / #29073 missed this
p4raw-id: //depot/perl@29424
Steve Peters [Thu, 30 Nov 2006 04:44:54 +0000 (04:44 +0000)]
Upgrade to Time-HiRes-1.95
p4raw-id: //depot/perl@29423
Jarkko Hietaniemi [Wed, 29 Nov 2006 19:06:09 +0000 (14:06 -0500)]
No code specified for -.
Message-ID: <
456E2071.3010404@iki.fi>
p4raw-id: //depot/perl@29422
Steve Peters [Wed, 29 Nov 2006 15:32:58 +0000 (15:32 +0000)]
Upgrade to CPAN-1.88_63.
p4raw-id: //depot/perl@29421
Yves Orton [Wed, 29 Nov 2006 16:18:34 +0000 (17:18 +0100)]
Re: Fix \k<foo> preceded by literal
Message-ID: <9b18b3110611290718o685a07ddja39f595ed97c231a@mail.gmail.com>
p4raw-id: //depot/perl@29420
Steve Peters [Wed, 29 Nov 2006 15:24:21 +0000 (15:24 +0000)]
Upgrade to Tie-RefHash-1.35_01, which is just a version change for
bleadperl.
p4raw-id: //depot/perl@29419
Steve Peters [Wed, 29 Nov 2006 15:17:59 +0000 (15:17 +0000)]
Upgrade to ExtUtils-ParseXS-2.17. Actuall just caught up with
most of the patches to bleadperl. The remaining change missing
is #29252, so, the version has been bumped to 2.17_01.
p4raw-id: //depot/perl@29418
projects / platform / upstream / perl.git / log