Jukka Rissanen [Mon, 13 Aug 2012 09:51:31 +0000 (12:51 +0300)]
service: Disconnect provider after connection timeout
The provider was not disconnected after a connection timeout.
This lead to weird issues in VPN code; like following provider
connect request would disconnect the earlier VPN connection and
report EALREADY to the user.
Lucas De Marchi [Wed, 8 Aug 2012 16:23:59 +0000 (13:23 -0300)]
doc: Improve description of service state property
Add missing "disconnect" state and point to doc/overview-api.txt for
more information about state transitions.
Daniel Wagner [Fri, 10 Aug 2012 12:23:18 +0000 (14:23 +0200)]
dundee Create ipconfig before setting index
Since connman_network_set_index() does not create magically the
ipconfig for us anymore, we need to create it inside set_connected().
Daniel Wagner [Thu, 9 Aug 2012 16:27:53 +0000 (18:27 +0200)]
bluetooth: Defer add_networks() if adapter is not powered yet
In the case we add a new adapter and the adapter is powered off
we would ignore the reported devices. Later when the adapter was
powered on it would just not add those networks.
Instead silently ignoring the devices, store the D-Bus paths in
a hash table and process them as soon the adapter is powered.
Fixes BMC#25322
Daniel Wagner [Thu, 9 Aug 2012 16:27:52 +0000 (18:27 +0200)]
bluetooth: Remove unused argument in check_networks()
Daniel Wagner [Thu, 9 Aug 2012 16:27:51 +0000 (18:27 +0200)]
bluetooth: Remove unused argument in add_network()
Daniel Wagner [Fri, 10 Aug 2012 09:59:04 +0000 (11:59 +0200)]
ofono: Set IPv6 nameservers
Elena Tebesoi [Fri, 10 Aug 2012 09:59:03 +0000 (11:59 +0200)]
network: Enable IPv6 on network interface
This patch enables IPv6 usage for network interfaces
with static/manual configuration.
Elena Tebesoi [Fri, 10 Aug 2012 09:59:02 +0000 (11:59 +0200)]
ipconfig: Allow NULL gateway for IPv6
This patch makes possible configuring a GPRS connection with
IPV6 settings and without gateway.
Daniel Wagner [Fri, 10 Aug 2012 09:59:01 +0000 (11:59 +0200)]
ofono: Create ipconfig before setting index
Since connman_network_set_index() does not create magically the
ipconfig for us anymore, we need to create it inside set_connected().
Daniel Wagner [Fri, 10 Aug 2012 09:59:00 +0000 (11:59 +0200)]
network: Only set index in connman_network_set_index()
Service ipconfig structures are no longer created in this
function.
Daniel Wagner [Fri, 10 Aug 2012 09:58:59 +0000 (11:58 +0200)]
service: Allow plugins to lookup services by networks
Daniel Wagner [Fri, 10 Aug 2012 09:58:58 +0000 (11:58 +0200)]
service: Allow plugins access to connman_service_create_ip4/6config
Julien Massot [Tue, 7 Aug 2012 16:57:06 +0000 (18:57 +0200)]
technology: Save tethering identifier and passphrase
Julien Massot [Tue, 7 Aug 2012 16:57:05 +0000 (18:57 +0200)]
technology: Rename save_state function by technology_save
Gustavo Padovan [Thu, 9 Aug 2012 21:57:26 +0000 (18:57 -0300)]
dundee: Clean up device in case of setup failure
If the creation and registration of Bluetooth DUN device fails we need to
clean up before return, otherwise we leak memory.
Gustavo Padovan [Thu, 9 Aug 2012 21:57:25 +0000 (18:57 -0300)]
bluetooth: Add device to hash before registration
During the connman_device_register() procedure a lookup to the
bluetooth_devices hash table happens, however the device is not on the
hash at this point and the look out fails.
If the registration fails, technology_disable() returns the Failed
message on D-Bus with the error status zero. That happens because we
don't have any device registered.
This patch moves the insertion of the device to before the device
registration.
Jukka Rissanen [Fri, 10 Aug 2012 08:21:26 +0000 (11:21 +0300)]
dhcp: Apply received hostname option according to conf file setting
We do not use the received DHCP hostname option (12) if system
config file setting says so.
Fixes BMC#25597
Jukka Rissanen [Fri, 10 Aug 2012 08:21:25 +0000 (11:21 +0300)]
main: Introduce conf file option to disable hostname updates
The AllowHostnameUpdates in system config file can be used
to ignore the hostname update request that for example
can be received via DHCP hostname option.
Jukka Rissanen [Wed, 8 Aug 2012 10:22:48 +0000 (13:22 +0300)]
provider: Discard routes to VPN server via VPN tunnel
These obsolete routes must be discarded as we cannot
contact VPN server via VPN tunnel. If the VPN server
address is not yet resolved, we do that while starting
the VPN client process.
Example of non working routes:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 0.0.0.0 0.0.0.0 UG 0 0 0 vpn0
10.10.15.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
10.10.15.1 0.0.0.0 255.255.255.255 UH 0 0 0 wlan0
10.252.112.0 0.0.0.0 255.255.240.0 U 0 0 0 vpn0
193.229.0.40 10.10.15.1 255.255.255.255 UGH 0 0 0 wlan0
193.229.0.42 10.10.15.1 255.255.255.255 UGH 0 0 0 wlan0
113.108.211.91 0.0.0.0 255.255.255.255 UH 0 0 0 vpn0
113.108.211.91 10.10.15.1 255.255.255.255 UGH 0 0 0 wlan0
The correct routes should be like this:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 vpn0
10.10.15.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
10.10.15.1 0.0.0.0 255.255.255.255 UH 0 0 0 wlan0
10.252.112.0 0.0.0.0 255.255.240.0 U 0 0 0 vpn0
193.229.0.40 10.10.15.1 255.255.255.255 UGH 0 0 0 wlan0
193.229.0.42 10.10.15.1 255.255.255.255 UGH 0 0 0 wlan0
113.108.211.91 10.10.15.1 255.255.255.255 UGH 0 0 0 wlan0
Jukka Rissanen [Wed, 8 Aug 2012 10:22:47 +0000 (13:22 +0300)]
provider: Allow VPN connection if not in connected state
Allow user to connect to VPN via dbus and supplying all
VPN parameters if the provider already exists but the VPN
is not in connected state.
This means that the user can call the Manager.ConnectProvider interface
multiple times to connect to VPN service. This patch is needed so that
OpenConnect can work correctly. Without this patch the OpenConnect cookie
cannot be passed to openconnect client program.
Jukka Rissanen [Wed, 8 Aug 2012 10:22:46 +0000 (13:22 +0300)]
connection: Set VPN default route to the VPN interface
Do not bother setting individual routes for default gateway so
for VPN we set the whole interface as a default gateway route.
Jukka Rissanen [Wed, 8 Aug 2012 10:22:45 +0000 (13:22 +0300)]
connection: Add more debugging when setting VPN routes
Grant Erickson [Wed, 8 Aug 2012 16:59:27 +0000 (09:59 -0700)]
service: Signal error property changes
In order to allow clients to update the property in a manner similar to
other service properties, signal changes in the service "Error" property
key/value pair.
The value "" is used when no error is asserted because D-Bus property
changed convention has no semantics for indicating a key/value pair was
removed.
Jukka Rissanen [Tue, 7 Aug 2012 14:08:41 +0000 (17:08 +0300)]
service: Initiate autoconnect after changing ipconfig method
Jukka Rissanen [Tue, 7 Aug 2012 14:08:40 +0000 (17:08 +0300)]
service: Do not set the service state when changing IPv4 method
The service state will be set to proper state if we are
actually doing the connection so do not set the state
when we are just setting the IPv4 method.
Jukka Rissanen [Tue, 7 Aug 2012 14:08:39 +0000 (17:08 +0300)]
service: Do not try to connect to service that cannot create connection
Check if the service IPv4/6 ipconfig is turned OFF, in this
case do not try to connect to that service because it will
not succeed.
Fixes BMC#25587
Jukka Rissanen [Tue, 7 Aug 2012 14:08:38 +0000 (17:08 +0300)]
ipconfig: Add function to check if the ipconfig is OFF
Grant Erickson [Tue, 7 Aug 2012 15:12:35 +0000 (08:12 -0700)]
main: Add support for specifying a non-default configuration file.
This patch adds support for specifying a main configuration file
different from the default value of /etc/connman/main.conf. This
is valuable during debug to specify alternate debug-only
configurations.
Daniel Wagner [Mon, 6 Aug 2012 16:34:06 +0000 (18:34 +0200)]
main: Remove unused compat argument
Andrei Gherzan [Mon, 6 Aug 2012 20:54:33 +0000 (23:54 +0300)]
storage.c: Search for settings file even if d_type is DT_UNKNOWN.
This is useful for filesystems where d_type is always DT_UNKNOWN,
for example in reiserfs.
Patrik Flykt [Mon, 6 Aug 2012 06:05:19 +0000 (09:05 +0300)]
TODO: Add WiMAX removal task
Daniel Wagner [Fri, 3 Aug 2012 11:30:14 +0000 (13:30 +0200)]
device: Remove unused phyindex
Marcel Holtmann [Tue, 24 Jul 2012 21:10:50 +0000 (23:10 +0200)]
Release 1.4
Tomasz Bursztyka [Tue, 24 Jul 2012 13:28:02 +0000 (16:28 +0300)]
wifi: Return -EBUSY when tethering
Fixes BMC#25561
Tomasz Bursztyka [Tue, 17 Jul 2012 13:32:06 +0000 (16:32 +0300)]
wispr: Add a reference counter mechanism on contexts
Basically, wispr provides a pointer (a wispr/portal context) to third parties
(agent, gweb...) which are answering asynchronously. However, if the technology
related to the service owning such context is disabled: this context is not
valid anymore, leading to a crash when third part answers after such action.
In order to avoid such issue, wispr implement an internal refcount system.
Fixes BMC#25479
Daniel Wagner [Wed, 18 Jul 2012 10:56:10 +0000 (12:56 +0200)]
AUTHORS: Mention Ross' contributions
Samuel Ortiz [Wed, 18 Jul 2012 10:23:49 +0000 (12:23 +0200)]
doc: Add coding-style.txt
This is a copy of the oFono coding-style document, with oFono instances
replaced with ConnMan ones.
It's also in sync with the neard one.
Ross Burton [Wed, 18 Jul 2012 09:37:38 +0000 (10:37 +0100)]
storage: check that the string isn't empty before splitting
If the string was non-NULL but empty (str="\0"), the following \0 assignment
would write to str[-1] and thus cause memory corruption.
On PPC and MIPS, this was causing crashes in glibc.
Tomasz Bursztyka [Wed, 11 Jul 2012 06:59:40 +0000 (09:59 +0300)]
device: Do not set regdom when device is not powered
Fixes crash bug:
connmand[6761]: plugins/ofono.c:get_properties_reply() /huawei_0 path /huawei_0 org.ofono.NetworkRegistration
connmand[6761]: plugins/ofono.c:netreg_properties_reply() /huawei_0
connmand[6761]: plugins/ofono.c:netreg_update_regdom() /huawei_0 MobileContryCode 460
connmand[6761]: src/device.c:connman_device_ref_debug() 0x8686ac0 ref 3 by plugins/wifi.c:991:wifi_set_regdom()
connmand[6761]: Aborting (signal 11) [src/connmand]
connmand[6761]: ++++++++ backtrace ++++++++
connmand[6761]: #0 0xb7749400 in
connmand[6761]: #1 0x806aa0b in g_supplicant_interface_set_country() at nat.c:0
connmand[6761]: #2 0x8062297 in wifi_set_regdom() at wifi.c:0
connmand[6761]: #3 0x80a607d in connman_technology_set_regdom() at ??:0
connmand[6761]: #4 0x806fefb in netreg_update_regdom() at ofono.c:0
connmand[6761]: #5 0x8071f3b in netreg_properties_reply() at ofono.c:0
connmand[6761]: #6 0x806f747 in get_properties_reply() at ofono.c:0
connmand[6761]: #7 0x4a374b62 in /usr/lib/libdbus-1.so.3
connmand[6761]: #8 0x4a3602b7 in /usr/lib/libdbus-1.so.3
connmand[6761]: #9 0x4a3639f5 in /usr/lib/libdbus-1.so.3
connmand[6761]: #10 0x8054250 in message_dispatch() at mainloop.c:0
connmand[6761]: #11 0x49f3e9d7 in /lib/libglib-2.0.so.0
connmand[6761]: #12 0x49f3de38 in /lib/libglib-2.0.so.0
connmand[6761]: #13 0x49f3e13e in /lib/libglib-2.0.so.0
connmand[6761]: #14 0x49f3e5a6 in /lib/libglib-2.0.so.0
connmand[6761]: #15 0x8053ab6 in main() at nat.c:0
connmand[6761]: #16 0x49cfc4c4 in /lib/libc.so.6
connmand[6761]: +++++++++++++++++++++++++++
Forest Bond [Mon, 16 Jul 2012 13:09:01 +0000 (09:09 -0400)]
gdhcp: Set client state to INIT_SELECTING on restart
With the previous behavior, we would end up sending a discover message
and then ignoring the reply due to the client state mismatch, so a
restart would never result in successful acquisition of a lease.
RFC 2131 specifies that the client should return to INIT state in
various restart scenarios. However, also note that it would not make
sense in any case to send a discover message and ignore the reply.
Forest Bond [Wed, 20 Jun 2012 21:06:28 +0000 (17:06 -0400)]
rtnl: Support PPP connections
The ARP header type for PPP connections is ARPHRD_PPP (512).
Grant Erickson [Mon, 16 Jul 2012 16:48:10 +0000 (09:48 -0700)]
gresolv: Use predefined mnemonics rather than magic numbers
Use predefined mnemonics from arpa/nameserv.h for the return value from
ns_msg_getflag rather than magic numbers.
Grant Erickson [Mon, 16 Jul 2012 16:48:09 +0000 (09:48 -0700)]
gresolv: Do not update successful status with unsuccessful one
When performing a resolver lookup from timeserver or wpad, both perform
queries with an unspecified address family. This means that both A and
AAAA record queries are issued. In cases where a valid, successful A
response comes back but where the AAAA query results in a timeout, do
not smash the successful A status with the time out AAAA status;
otherwise, the timeserver or wpad will appear to fail to them when, in
fact, the A query was successful and more than satisfies its unspecified
address family requirement.
Partial fix for BMC#25486.
Grant Erickson [Mon, 16 Jul 2012 16:48:08 +0000 (09:48 -0700)]
gresolve: Fix a typo in conditional check for returning results
In both parse_response and query_timeout there exists logic that checks
to ensure that both an A and AAAA lookups have either been responded to
or timed out before processing and returning results to the caller. In
query_timeout, there was a typo in the condition check such that it did
not match those conditions tested in parse_response.
Grant Erickson [Mon, 16 Jul 2012 16:48:07 +0000 (09:48 -0700)]
ntp: Add debug message when starting NTP against resolved server
This patch adds an analagous debug message when starting NTP against a
resolved server as when starting against a numbered server.
Grant Erickson [Mon, 16 Jul 2012 16:48:06 +0000 (09:48 -0700)]
ntp: Fixed a debug message typo
Grant Erickson [Mon, 16 Jul 2012 16:48:05 +0000 (09:48 -0700)]
ntp: Retry a given server address multiple times before falling back
This patch causes the internal NTP client to retry a given server
address up to three times (four total attempts) at a two second interval
before falling back to another server name or server address.
Grant Erickson [Mon, 16 Jul 2012 16:48:04 +0000 (09:48 -0700)]
ntp: Use mnemonic when specifying the request precision
This patch uses a mnemonic to specify the request precision and also
adds a comment how a future implementation might pass along the actual
system wall clock precision.
Grant Erickson [Mon, 16 Jul 2012 16:48:03 +0000 (09:48 -0700)]
ntp: Add mnemonics for common clock precisions
Grant Erickson [Mon, 16 Jul 2012 16:48:02 +0000 (09:48 -0700)]
ntp: Use mnemonics when checking reply flags
Use mnemonics when checking reply flags and print out information in
debug mode about why the reply flags were rejected.
Grant Erickson [Mon, 16 Jul 2012 16:48:01 +0000 (09:48 -0700)]
ntp: Specify leap-not-in-sync in flags
This patch sets the non-in-sync flag of the leap subfield of the packet
flags field. This reflects behavior implemented by ntpdate or ntpd in
one-shot mode.
Grant Erickson [Mon, 16 Jul 2012 16:48:00 +0000 (09:48 -0700)]
ntp: Send a transmit time value that reflects current system time
This sets the ntp request packet transmit time to the current system
time to reflect behavior implemented by ntpdate and ntpd in one-shot
mode.
Grant Erickson [Mon, 16 Jul 2012 16:47:59 +0000 (09:47 -0700)]
ntp: Use mnemonics rather than magic numbers
Convert a magic number into equivalent mnemonics for the flags (leap,
version, mode) packet field.
Grant Erickson [Mon, 16 Jul 2012 16:47:58 +0000 (09:47 -0700)]
ntp: Add mnemonics for the flags (leap, version, mode) packet field
Jukka Rissanen [Mon, 16 Jul 2012 08:00:47 +0000 (11:00 +0300)]
timeserver: Try all resolved timeserver IP addresses
If we get more than one IP address, then add those
server addresses to the time server list so that they
can be tried if the first entry fails.
Jukka Rissanen [Mon, 16 Jul 2012 08:00:46 +0000 (11:00 +0300)]
ntp: If the server cannot be contacted, try next one
This could happen if the network routes are not yet setup
so the sendto() could fail. In this case try next address and
hope for the best. This is a rare issue but I have seen it
couple of times.
Marcel Holtmann [Mon, 16 Jul 2012 13:12:05 +0000 (10:12 -0300)]
Revert "build: Use -Wshadow compiler option"
Marcel Holtmann [Sun, 15 Jul 2012 22:59:19 +0000 (19:59 -0300)]
build: Use -Wshadow compiler option
Marcel Holtmann [Sun, 15 Jul 2012 22:58:46 +0000 (19:58 -0300)]
dnsproxy: Avoid multiple shadowing variables
Marcel Holtmann [Sun, 15 Jul 2012 22:55:07 +0000 (19:55 -0300)]
tethering: Avoid shadowing connection variable
Marcel Holtmann [Sun, 15 Jul 2012 22:54:14 +0000 (19:54 -0300)]
session: Avoid shadowing hash table iterator
Marcel Holtmann [Sun, 15 Jul 2012 22:53:13 +0000 (19:53 -0300)]
session: Avoid shadowing session info variable
Marcel Holtmann [Sun, 15 Jul 2012 22:51:11 +0000 (19:51 -0300)]
config: Avoid shadowing config structure variable
Marcel Holtmann [Sun, 15 Jul 2012 22:50:29 +0000 (19:50 -0300)]
counter: Avoid shadowing connection variable
Marcel Holtmann [Sun, 15 Jul 2012 22:43:17 +0000 (19:43 -0300)]
notifier: Avoid shadowing connected variable
Marcel Holtmann [Sun, 15 Jul 2012 22:41:18 +0000 (19:41 -0300)]
agent: Avoid shadowing connection variable
Marcel Holtmann [Sun, 15 Jul 2012 22:40:49 +0000 (19:40 -0300)]
service: Avoid shadowing string variable
Marcel Holtmann [Sun, 15 Jul 2012 22:39:51 +0000 (19:39 -0300)]
task: Avoid shadowing connection variable
Marcel Holtmann [Sun, 15 Jul 2012 22:39:24 +0000 (19:39 -0300)]
plugins: Avoid shadowing connection variable
Marcel Holtmann [Sun, 15 Jul 2012 22:31:28 +0000 (19:31 -0300)]
gsupplicant: Avoid shadowing key variable
Marcel Holtmann [Sun, 15 Jul 2012 22:31:06 +0000 (19:31 -0300)]
unit: Avoid shadowing session info variable
Marcel Holtmann [Sun, 15 Jul 2012 22:30:38 +0000 (19:30 -0300)]
tools: Avoid shadowing buffer variable
Marcel Holtmann [Sun, 15 Jul 2012 22:29:26 +0000 (19:29 -0300)]
gdhcp: Avoid shadowing address string variable
Jukka Rissanen [Thu, 12 Jul 2012 12:32:42 +0000 (15:32 +0300)]
service: Gateway IP address property is not sent
The address of the IP gateway is not sent when the IP
property changes. This was because of timing issues i.e.,
the gateway was not yet set when the other IP properties
were sent.
Fixes BMC#25471
Jukka Rissanen [Tue, 10 Jul 2012 15:13:49 +0000 (18:13 +0300)]
wifi: Debug print fixed
Convert a warn message to debug one because it is printed
too often to be usefull as a warning message.
Jukka Rissanen [Tue, 10 Jul 2012 15:13:48 +0000 (18:13 +0300)]
wifi: Scan all hidden and provisioned AP
Jukka Rissanen [Tue, 10 Jul 2012 15:13:47 +0000 (18:13 +0300)]
config: Get configurations that are provisioned
We need the list of provisioned services so that
all the hidden ones can be scanned.
Jukka Rissanen [Tue, 10 Jul 2012 15:13:46 +0000 (18:13 +0300)]
config: Read hidden AP information from config file
Jukka Rissanen [Tue, 10 Jul 2012 15:13:45 +0000 (18:13 +0300)]
doc: Hidden AP provisioning information added
Tomasz Bursztyka [Tue, 10 Jul 2012 14:45:14 +0000 (17:45 +0300)]
TODO: Remove task about wpspin as PreviousPassphrase type
Tomasz Bursztyka [Tue, 10 Jul 2012 14:45:13 +0000 (17:45 +0300)]
doc: Add necessary documentation about wpspin as a PreviousPassphrase type
Tomasz Bursztyka [Tue, 10 Jul 2012 14:45:12 +0000 (17:45 +0300)]
agent: Handle wpspin type as a PreviousPassphrase
Tomasz Bursztyka [Tue, 10 Jul 2012 14:45:11 +0000 (17:45 +0300)]
agent: Rewrite how PreviousPassphrase field is handled
This is a necessary rewrite to make it clearer and simpler, before implementing
wpspin type support.
Jukka Rissanen [Mon, 9 Jul 2012 09:24:48 +0000 (12:24 +0300)]
device: Turn off all running interfaces at startup
Turning off running interfaces that have IP address,
causes all routes related to those interfaces to be
removed by kernel. This way connman will get a fresh
start without any extra and obsolete routes around.
Jukka Rissanen [Mon, 9 Jul 2012 09:24:47 +0000 (12:24 +0300)]
inet: Return all running interfaces
Add a function that returns all (except loopback)
interfaces that are up and running (have IP address).
This information is used in following patch to clean
up the routes that are left hanging around.
Jukka Rissanen [Wed, 4 Jul 2012 08:21:27 +0000 (11:21 +0300)]
service: Make sure the pending reply is not lost
The user data (pending reply) can be null if agent returns
an error. In this case do not overwrite the real pending reply.
Julien Massot [Thu, 5 Jul 2012 14:12:53 +0000 (14:12 +0000)]
dhcp: warn on invalid netmask
Patrik Flykt [Thu, 28 Jun 2012 11:20:57 +0000 (14:20 +0300)]
main: Dynamically allocate default blacklist array, free on exit
Patrik Flykt [Thu, 28 Jun 2012 13:06:00 +0000 (16:06 +0300)]
main: Move default string arrays top of the file
Julien Massot [Wed, 4 Jul 2012 16:09:03 +0000 (16:09 +0000)]
technology: check validity of given properties for tethering
A WPA2 passphrase is between 8 and 63 characters,
a SSID name is between 1 and 32 characters.
Julien Massot [Wed, 4 Jul 2012 16:09:02 +0000 (16:09 +0000)]
technology: return already enabled when tethering is enabled
Tomasz Bursztyka [Wed, 4 Jul 2012 14:24:42 +0000 (17:24 +0300)]
TODO: Remove BackgroundScanning task
Tomasz Bursztyka [Wed, 4 Jul 2012 14:24:41 +0000 (17:24 +0300)]
wifi: Add support for autoscan request
Tomasz Bursztyka [Wed, 4 Jul 2012 14:24:40 +0000 (17:24 +0300)]
gsupplicant: Add a function to handle autoscan method
Tomasz Bursztyka [Wed, 4 Jul 2012 13:48:07 +0000 (16:48 +0300)]
TODO: Add what wifi legacy support should be removed about set_regdom
Tomasz Bursztyka [Wed, 4 Jul 2012 13:48:06 +0000 (16:48 +0300)]
wifi: Add capability to set regulatory domain through device's interface
Fixes BMC#25244
Tomasz Bursztyka [Wed, 4 Jul 2012 13:48:05 +0000 (16:48 +0300)]
gsupplicant: Add a method to set interface's country property
Tomasz Bursztyka [Wed, 4 Jul 2012 13:48:04 +0000 (16:48 +0300)]
gsupplicant: Adapt set country callback to return a result
This is necessary for the next coming patches, to fix country setting by interface
Tomasz Bursztyka [Wed, 4 Jul 2012 13:48:03 +0000 (16:48 +0300)]
technology: Set regulatory domain by device or fallback to technology based