review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge tag 'input-for-v6.1-rc5' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- a fix for 8042 to stop leaking platform device on unload

- a fix for Goodix touchscreens on devices like Nanote UMPC-01 where we
   need to reset controller to load config from firmware

- a workaround for Acer Switch to avoid interrupt storm from home and
   power buttons

- a workaround for more ASUS ZenBook models to detect keyboard
   controller

- a fix for iforce driver to properly handle communication errors

- touchpad on HP Laptop 15-da3001TU switched to RMI mode

* tag 'input-for-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix leaking of platform device on module removal
  Input: i8042 - apply probe defer to more ASUS ZenBook models
  Input: soc_button_array - add Acer Switch V 10 to dmi_use_low_level_irq[]
  Input: soc_button_array - add use_low_level_irq module parameter
  Input: iforce - invert valid length check when fetching device IDs
  Input: goodix - try resetting the controller when no config is set
  dt-bindings: input: touchscreen: Add compatible for Goodix GT7986U chip
  Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode

Merge tag 'zonefs-6.1-rc6' of git://git./linux/kernel/git/dlemoal/zonefs

Pull zonefs fixes from Damien Le Moal:

- Fix the IO error recovery path for failures happening in the last
   zone of device, and that zone is a "runt" zone (smaller than the
   other zone). The current code was failing to properly obtain a zone
   report in that case.

- Remove the unused to_attr() function as it is unused, causing
   compilation warnings with clang.

* tag 'zonefs-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Remove to_attr() helper function
  zonefs: fix zone report size in __zonefs_io_error()

Input: i8042 - fix leaking of platform device on module removal

Avoid resetting the module-wide i8042_platform_device pointer in
i8042_probe() or i8042_remove(), so that the device can be properly
destroyed by i8042_exit() on module unload.

Fixes: 9222ba68c3f4 ("Input: i8042 - add deferred probe support")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Link: https://lore.kernel.org/r/20221109034148.23821-1-chenjun102@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:
"This is mostly fixing issues around the poll rework, but also two
  tweaks for the multishot handling for accept and receive.

  All stable material"

* tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux:
  io_uring: disallow self-propelled ring polling
  io_uring: fix multishot recv request leaks
  io_uring: fix multishot accept request leaks
  io_uring: fix tw losing poll events
  io_uring: update res mask in io_poll_check_events

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Fix a build error with CONFIG_CFI_CLANG + CONFIG_FTRACE when
   CONFIG_FUNCTION_GRAPH_TRACER is not enabled.

- Fix a BUG_ON triggered by the page table checker due to incorrect
   file_map_count for non-leaf pmd/pud (the arm64
   pmd_user_accessible_page() not checking whether it's a leaf entry).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud
  arm64: ftrace: Define ftrace_stub_graph only with FUNCTION_GRAPH_TRACER

Merge tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

- NVMe pull request via Christoph:
      - Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
      - Memory leak fix in nvmet (Sagi Grimberg)

- Regression fix for block cgroups pinning the wrong blkcg, causing
   leaks of cgroups and blkcgs (Chris)

- UAF fix for drbd setup error handling (Dan)

- Fix DMA alignment propagation in DM (Keith)

* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
  dm-log-writes: set dma_alignment limit in io_hints
  dm-integrity: set dma_alignment limit in io_hints
  block: make blk_set_default_limits() private
  dm-crypt: provide dma_alignment limit in io_hints
  block: make dma_alignment a stacking queue_limit
  nvmet: fix a memory leak in nvmet_auth_set_key
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
  drbd: use after free in drbd_create_device()
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
  blk-cgroup: properly pin the parent in blkcg_css_online

Merge tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"I guess the main question is are things settling down, and I'd say
  kinda, these are all pretty small fixes, nothing big stands out
  really, just seems to be quite a few of them.

  Mostly amdgpu and core fixes, with some i915, tegra, vc4, panel bits.

  core:
   - Fix potential memory leak in drm_dev_init()
   - Fix potential null-ptr-deref in drm_vblank_destroy_worker()
   - Revert hiding unregistered connectors from userspace, as it breaks
     on DP-MST
   - Add workaround for DP++ dual mode adaptors that don't support i2c
     subaddressing

  i915:
   - Fix uaf with lmem_userfault_list handling

  amdgpu:
   - gang submit fixes
   - Fix a possible memory leak in ganng submit error path
   - DP tunneling fixes
   - DCN 3.1 page flip fix
   - DCN 3.2.x fixes
   - DCN 3.1.4 fixes
   - Don't expose degamma on hardware that doesn't support it
   - BACO fixes for SMU 11.x
   - BACO fixes for SMU 13.x
   - Virtual display fix for devices with no display hardware

  amdkfd:
   - Memory limit regression fix

  tegra:
   - tegra20 GART fix

  vc4:
   - Fix error handling in vc4_atomic_commit_tail()

  lima:
   - Set lima's clkname corrrectly when regulator is missing

  panel:
   - Set bpc for logictechno panels"

* tag 'drm-fixes-2022-11-19' of git://anongit.freedesktop.org/drm/drm: (28 commits)
  gpu: host1x: Avoid trying to use GART on Tegra20
  drm/display: Don't assume dual mode adaptors support i2c sub-addressing
  drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround
  drm/amd/pm: enable runpm support over BACO for SMU13.0.7
  drm/amd/pm: enable runpm support over BACO for SMU13.0.0
  drm/amdgpu: there is no vbios fb on devices with no display hw (v2)
  drm/amdkfd: Fix a memory limit issue
  drm/amdgpu: disable BACO support on more cards
  drm/amd/display: don't enable DRM CRTC degamma property for DCE
  drm/amd/display: Set max for prefetch lines on dcn32
  drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32
  drm/amd/display: Fix prefetch calculations for dcn32
  drm/amd/display: Fix optc2_configure warning on dcn314
  drm/amd/display: Fix calculation for cursor CAB allocation
  Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"
  drm/amd/display: Support parsing VRAM info v3.0 from VBIOS
  drm/amd/display: Fix invalid DPIA AUX reply causing system hang
  drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo
  drm/amd/display: Add HUBP surface flip interrupt handler
  drm/amd/display: Fix access timeout to DPIA AUX at boot time
  ...

Merge tag 's390-6.1-5' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Alexander Gordeev:

- Fix deadlock in discontiguous saved segments (DCSS) block device
   driver. When adding a disk and scanning partitions the scan would not
   break out early without a missed flag.

- Avoid using global register variable for current_stack_pointer due to
   an old bug in gcc versions prior to gcc-8.4. Due to this bug a broken
   code is generated, which leads to stack corruptions.

* tag 's390-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: avoid using global register for current_stack_pointer
  s390/dcssblk: fix deadlock when adding a DCSS

Merge tag 'for-6.1/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix misbehavior if list_versions DM ioctl races with module loading

- Fix missing decrement of no_sleep_enabled if dm_bufio_client_create
   failed

- Allow DM integrity devices to be activated in read-only mode

* tag 'for-6.1/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: clear the journal on suspend
  dm integrity: flush the journal on suspend
  dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed
  dm ioctl: fix misbehavior if list_versions races with module loading

Merge tag 'drm/tegra/for-6.1-rc6' of https://gitlab.freedesktop.org/drm/tegra into drm-fixes

drm/tegra: Fixes for v6.1-rc6

This contains a single fix that avoids using the GART on Tegra20 because
it doesn't work well with the way the Tegra DRM driver tries to use it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118121614.3511110-1-thierry.reding@gmail.com

Merge tag 'usb-6.1-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB driver fixes from Greg KH:
"Here are a number of USB driver fixes and new device ids for 6.1-rc6.
  Included in here are:

   - new usb-serial device ids

   - dwc3 driver fixes for reported problems

   - cdns3 driver fixes

   - new USB device quirks

   - typec driver fixes

   - extcon USB typec driver fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: option: add u-blox LARA-L6 modem
  USB: serial: option: add u-blox LARA-R6 00B modem
  USB: serial: option: remove old LARA-R6 PID
  USB: serial: option: add Fibocom FM160 0x0111 composition
  usb: add NO_LPM quirk for Realforce 87U Keyboard
  usb: cdns3: host: fix endless superspeed hub port reset
  usb: chipidea: fix deadlock in ci_otg_del_timer
  usb: dwc3: Do not get extcon device when usb-role-switch is used
  usb: typec: tipd: Prevent uninitialized event{1,2} in IRQ handler
  usb: typec: mux: Enter safe mode only when pins need to be reconfigured
  extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered
  Revert "usb: dwc3: disable USB core PHY management"
  usb: dwc3: gadget: Return -ESHUTDOWN on ep disable
  USB: bcma: Make GPIO explicitly optional
  USB: serial: option: add Sierra Wireless EM9191

Merge tag 'staging-6.1-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.1-rc6.

  It resolves a bogus signed character test as pointed out, and fixed
  by, Jason in the rtl8192e driver

  It has been in linux-next for a few weeks now with no reported
  problems"

* tag 'staging-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8192e: remove bogus ssid character sign test

arm64/mm: fix incorrect file_map_count for non-leaf pmd/pud

The page table check trigger BUG_ON() unexpectedly when collapse hugepage:

------------[ cut here ]------------
kernel BUG at mm/page_table_check.c:82!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 6 PID: 68 Comm: khugepaged Not tainted 6.1.0-rc3+ #750
Hardware name: linux,dummy-virt (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : page_table_check_clear.isra.0+0x258/0x3f0
lr : page_table_check_clear.isra.0+0x240/0x3f0
[...]
Call trace:
  page_table_check_clear.isra.0+0x258/0x3f0
  __page_table_check_pmd_clear+0xbc/0x108
  pmdp_collapse_flush+0xb0/0x160
  collapse_huge_page+0xa08/0x1080
  hpage_collapse_scan_pmd+0xf30/0x1590
  khugepaged_scan_mm_slot.constprop.0+0x52c/0xac8
  khugepaged+0x338/0x518
  kthread+0x278/0x2f8
  ret_from_fork+0x10/0x20
[...]

Since pmd_user_accessible_page() doesn't check if a pmd is leaf, it
decrease file_map_count for a non-leaf pmd comes from collapse_huge_page().
and so trigger BUG_ON() unexpectedly.

Fix this problem by using pmd_leaf() insteal of pmd_present() in
pmd_user_accessible_page(). Moreover, use pud_leaf() for
pud_user_accessible_page() too.

Fixes: 42b2547137f5 ("arm64/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK")
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221117075602.2904324-2-liushixin2@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'tty-6.1-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 6.1-rc6.
  They all resolve reported problems:

   - kernel doc build problems with the -rc1 serial driver documentation
     update

   - n_gsm reported problems

   - imx serial driver missing callback

   - lots of tiny 8250 driver fixes for reported issues.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'tty-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  docs/driver-api/miscellaneous: Remove kernel-doc of serial_core.c
  serial: 8250: Flush DMA Rx on RLSI
  serial: 8250_lpss: Use 16B DMA burst with Elkhart Lake
  serial: 8250_lpss: Configure DMA also w/o DMA filter
  serial: 8250: Fall back to non-DMA Rx if IIR_RDI occurs
  tty: n_gsm: fix sleep-in-atomic-context bug in gsm_control_send
  Revert "tty: n_gsm: replace kicktimer with delayed_work"
  Revert "tty: n_gsm: avoid call of sleeping functions from atomic context"
  serial: imx: Add missing .thaw_noirq hook
  tty: serial: fsl_lpuart: don't break the on-going transfer when global reset
  serial: 8250: omap: Flush PM QOS work on remove
  serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()
  serial: 8250_omap: remove wait loop from Errata i202 workaround
  serial: 8250: omap: Fix missing PM runtime calls for omap8250_set_mctrl()
  serial: 8250: 8250_omap: Avoid RS485 RTS glitch on ->set_termios()

Merge tag 'driver-core-6.1-rc6' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are two small driver core fixes for 6.1-rc6:

   - utsname fix, this one should already be in your tree as it came
     from a different tree earlier.

   - kernfs bugfix for a much reported syzbot report that seems to keep
     getting triggered.

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: Fix spurious lockdep warning in kernfs_find_and_get_node_by_id()
  kernel/utsname_sysctl.c: Add missing enum uts_proc value

Merge tag 'char-misc-6.1-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.1-rc6 to
  resolve some reported problems. Included in here are:

   - iio driver fixes

   - binder driver fix

   - nvmem driver fix

   - vme_vmci information leak fix

   - parport fix

   - slimbus configuration fix

   - coreboot firmware bugfix

   - speakup build fix and crash fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
  firmware: coreboot: Register bus in module init
  nvmem: u-boot-env: fix crc32_data_offset on redundant u-boot-env
  slimbus: qcom-ngd: Fix build error when CONFIG_SLIM_QCOM_NGD_CTRL=y && CONFIG_QCOM_RPROC_COMMON=m
  docs: update mediator contact information in CoC doc
  slimbus: stream: correct presence rate frequencies
  nvmem: lan9662-otp: Fix compatible string
  binder: validate alloc->mm in ->mmap() handler
  parport_pc: Avoid FIFO port location truncation
  siox: fix possible memory leak in siox_device_add()
  misc/vmw_vmci: fix an infoleak in vmci_host_do_receive_datagram()
  speakup: replace utils' u_char with unsigned char
  speakup: fix a segfault caused by switching consoles
  tools: iio: iio_generic_buffer: Fix read size
  iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()
  iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()
  iio: adc: mp2629: fix potential array out of bound access
  iio: adc: mp2629: fix wrong comparison of channel
  iio: pressure: ms5611: changed hardcoded SPI speed to value limited
  iio: pressure: ms5611: fixed value compensation bug
  iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.
  ...

Merge tag 'sound-6.1-rc6' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A fair amount of commits at this time due to ASoC PR merge, but all
  look small and easy, mostly device-specific fixes spanned in various
  drivers. Hopefully this should be the last big chunk for 6.1"

* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
  ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
  ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
  ASoC: stm32: dfsdm: manage cb buffers cleanup
  ASoC: sof_es8336: reduce pop noise on speaker
  ASoC: SOF: topology: No need to assign core ID if token parsing failed
  ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
  ASoC: rt5677: fix legacy dai naming
  ASoC: rt5514: fix legacy dai naming
  ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
  ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
  ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
  ASoC: tas2780: Fix set_tdm_slot in case of single slot
  ASoC: tas2764: Fix set_tdm_slot in case of single slot
  ASoC: tas2770: Fix set_tdm_slot in case of single slot
  ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
  ASoC: core: Fix use-after-free in snd_soc_exit()
  MAINTAINERS: update Tzung-Bi's email address
  ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
  ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
  ...

Merge tag 'mmc-v6.1-rc5' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
"MMC core:
   - Fixup VDD/VMMC voltage-range negotiation

  MMC host:
   - sdhci-pci: Fix memory leak by adding a missing pci_dev_put()
   - sdhci-pci-o2micro: Fix card detect by tuning the debounce timeout"

* tag 'mmc-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()
  mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout
  mmc: core: properly select voltage range without power cycle

io_uring: disallow self-propelled ring polling

When we post a CQE we wake all ring pollers as it normally should be.
However, if a CQE was generated by a multishot poll request targeting
its own ring, it'll wake that request up, which will make it to post
a new CQE, which will wake the request and so on until it exhausts all
CQ entries.

Don't allow multishot polling io_uring files but downgrade them to
oneshots, which was always stated as a correct behaviour that the
userspace should check for.

Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3124038c0e7474d427538c2d915335ec28c92d21.1668785722.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm integrity: clear the journal on suspend

There was a problem that a user burned a dm-integrity image on CDROM
and could not activate it because it had a non-empty journal.

Fix this problem by flushing the journal (done by the previous commit)
and clearing the journal (done by this commit). Once the journal is
cleared, dm-integrity won't attempt to replay it on the next
activation.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm integrity: flush the journal on suspend

This commit flushes the journal on suspend. It is prerequisite for the
next commit that enables activating dm integrity devices in read-only mode.

Note that we deliberately didn't flush the journal on suspend, so that the
journal replay code would be tested. However, the dm-integrity code is 5
years old now, so that journal replay is well-tested, and we can make this
change now.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm bufio: Fix missing decrement of no_sleep_enabled if dm_bufio_client_create failed

The 'no_sleep_enabled' should be decreased in error handling path
in dm_bufio_client_create() when the DM_BUFIO_CLIENT_NO_SLEEP flag
is set, otherwise static_branch_unlikely() will always return true
even if no dm_bufio_client instances have DM_BUFIO_CLIENT_NO_SLEEP
flag set.

Cc: stable@vger.kernel.org
Fixes: 3c1c875d0586 ("dm bufio: conditionally enable branching for DM_BUFIO_CLIENT_NO_SLEEP")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm ioctl: fix misbehavior if list_versions races with module loading

__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.

The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.

The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.

"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.

Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.

Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

Merge tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme into block-6.1

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.1

- two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- memory leak fix in nvmet (Sagi Grimberg)"

* tag 'nvme-6.1-2022-11-18' of git://git.infradead.org/nvme:
  nvmet: fix a memory leak in nvmet_auth_set_key
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro

gpu: host1x: Avoid trying to use GART on Tegra20

Since commit c7e3ca515e78 ("iommu/tegra: gart: Do not register with
bus") quite some time ago, the GART driver has effectively disabled
itself to avoid issues with the GPU driver expecting it to work in ways
that it doesn't. As of commit 57365a04c921 ("iommu: Move bus setup to
IOMMU device registration") that bodge no longer works, but really the
GPU driver should be responsible for its own behaviour anyway. Make the
workaround explicit.

Reported-by: Jon Hunter <jonathanh@nvidia.com>
Suggested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Merge tag 'amd-drm-fixes-6.1-2022-11-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.1-2022-11-16:

amdgpu:
- Fix a possible memory leak in ganng submit error path
- DP tunneling fixes
- DCN 3.1 page flip fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- Don't expose degamma on hardware that doesn't support it
- BACO fixes for SMU 11.x
- BACO fixes for SMU 13.x
- Virtual display fix for devices with no display hardware

amdkfd:
- Memory limit regression fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117040416.6100-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2022-11-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix uaf with lmem_userfault_list handling (Matthew Auld)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y3X2bNJ/4GR1BAiG@tursulin-desk

Merge tag 'soc-fixes-6.1-3' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"Another set of devicetree and code changes for SoC platforms, notably:

   - DT schema warning fixes for i.MX

   - Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP

   - MAINTAINERS updates for Hisilicon and RISC-V, documenting which
     RISC-V SoC specific patches will now get merged through the SoC
     tree in the future.

   - A code fix for at91 suspend, to work around broken hardware

   - A devicetree fix for lan966x/pcb8291 LED support

   - Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems
     like incorrect register sizes and schema warnings. One fix makes
     the UFS controller work on sc8280xp, and six fixes address the same
     regulator problem in a variety of platforms"

* tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  MAINTAINERS: repair Microchip corei2c driver entry
  MAINTAINERS: add an entry for StarFive devicetrees
  MAINTAINERS: generify the Microchip RISC-V entry name
  MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees
  MAINTAINERS: git://github.com -> https://github.com for HiSilicon
  soc: imx8m: Enable OCOTP clock before reading the register
  arm64: dts: imx93-pinfunc: drop execution permission
  arm64: dts: imx8mn: Fix NAND controller size-cells
  arm64: dts: imx8mm: Fix NAND controller size-cells
  ARM: dts: imx7: Fix NAND controller size-cells
  arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
  ARM: at91: pm: avoid soft resetting AC DLL
  ARM: dts: lan966x: Enable sgpio on pcb8291
  arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
  ARM: dts: at91: sama7g5: fix signal name of pin PB2
  arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
  arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
  arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
  arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
  arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
  ...

Merge tag 'ceph-for-6.1-rc6' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
"Three filesystem bug fixes, intended for stable"

* tag 'ceph-for-6.1-rc6' of https://github.com/ceph/ceph-client:
  ceph: fix NULL pointer dereference for req->r_session
  ceph: avoid putting the realm twice when decoding snaps fails
  ceph: fix a NULL vs IS_ERR() check when calling ceph_lookup_inode()
  MAINTAINERS: git://github.com -> https://github.com for ceph

Merge tag 'drm-misc-fixes-2022-11-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v6.1-rc6:
- Fix error handling in vc4_atomic_commit_tail()
- Set bpc for logictechno panels.
- Fix potential memory leak in drm_dev_init()
- Fix potential null-ptr-deref in drm_vblank_destroy_worker()
- Set lima's clkname corrrectly when regulator is missing.
- Small amdgpu fix to gang submission.
- Revert hiding unregistered connectors from userspace, as it breaks on DP-MST.
- Add workaround for DP++ dual mode adaptors that don't support
i2c subaddressing.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7d02936-c550-199b-6cb7-cbf6cf104e4a@linux.intel.com

Merge tag 'usb-serial-6.1-rc6' of https://git./linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:
  "USB-serial fixes for 6.1-rc6

   Here are some new modem device ids for 6.1.

   All have been in linux-next with no reported issues."

* tag 'usb-serial-6.1-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add u-blox LARA-L6 modem
  USB: serial: option: add u-blox LARA-R6 00B modem
  USB: serial: option: remove old LARA-R6 PID
  USB: serial: option: add Fibocom FM160 0x0111 composition
  USB: serial: option: add Sierra Wireless EM9191

io_uring: fix multishot recv request leaks

Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.

Cc: stable@vger.kernel.org
Fixes: 1300ebb20286b ("io_uring: multishot recv")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/37762040ba9c52b81b92a2f5ebfd4ee484088951.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix multishot accept request leaks

Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.

Cc: stable@vger.kernel.org
Fixes: 390ed29b5e425 ("io_uring: add IORING_ACCEPT_MULTISHOT for accept")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7700ac57653f2823e30b34dc74da68678c0c5f13.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: fix tw losing poll events

We may never try to process a poll wake and its mask if there was
multiple wake ups racing for queueing up a tw. Force
io_poll_check_events() to update the mask by vfs_poll().

Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/00344d60f8b18907171178d7cf598de71d127b0b.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring: update res mask in io_poll_check_events

When io_poll_check_events() collides with someone attempting to queue a
task work, it'll spin for one more time. However, it'll continue to use
the mask from the first iteration instead of updating it. For example,
if the first wake up was a EPOLLIN and the second EPOLLOUT, the
userspace will not get EPOLLOUT in time.

Clear the mask for all subsequent iterations to force vfs_poll().

Cc: stable@vger.kernel.org
Fixes: aa43477b04025 ("io_uring: poll rework")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2dac97e8f691231049cb259c4ae57e79e40b537c.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nfsd-6.1-5' of git://git./linux/kernel/git/cel/linux

Pull nfsd fix from Chuck Lever:

- Fix another tracepoint crash

* tag 'nfsd-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix trace_nfsd_fh_verify_err() crasher

Merge tag 'net-6.1-rc6' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.

  Current release - regressions:

   - tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init()

  Previous releases - regressions:

   - bridge: fix memory leaks when changing VLAN protocol

   - dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims

   - dsa: don't leak tagger-owned storage on switch driver unbind

   - eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6
     is removed

   - eth: stmmac: ensure tx function is not running in
     stmmac_xdp_release()

   - eth: hns3: fix return value check bug of rx copybreak

  Previous releases - always broken:

   - kcm: close race conditions on sk_receive_queue

   - bpf: fix alignment problem in bpf_prog_test_run_skb()

   - bpf: fix writing offset in case of fault in
     strncpy_from_kernel_nofault

   - eth: macvlan: use built-in RCU list checking

   - eth: marvell: add sleep time after enabling the loopback bit

   - eth: octeon_ep: fix potential memory leak in octep_device_setup()

  Misc:

   - tcp: configurable source port perturb table size

   - bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)"

* tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  net: use struct_group to copy ip/ipv6 header addresses
  net: usb: smsc95xx: fix external PHY reset
  net: usb: qmi_wwan: add Telit 0x103a composition
  netdevsim: Fix memory leak of nsim_dev->fa_cookie
  tcp: configurable source port perturb table size
  l2tp: Serialize access to sk_user_data with sk_callback_lock
  net: thunderbolt: Fix error handling in tbnet_init()
  net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
  net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()
  net: dsa: don't leak tagger-owned storage on switch driver unbind
  net/x25: Fix skb leak in x25_lapb_receive_frame()
  net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
  bridge: switchdev: Fix memory leaks when changing VLAN protocol
  net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
  net: hns3: fix return value check bug of rx copybreak
  net: hns3: fix incorrect hw rss hash type of rx packet
  net: phy: marvell: add sleep time after enabling the loopback bit
  net: ena: Fix error handling in ena_init()
  kcm: close race conditions on sk_receive_queue
  net: ionic: Fix error handling in ionic_init_module()
  ...

net: use struct_group to copy ip/ipv6 header addresses

kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:

                 from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
    inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
    inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
    inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
    inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
  413 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: usb: smsc95xx: fix external PHY reset

An external PHY needs settling time after power up or reset.
In the bind() function an mdio bus is registered. If at this point
the external PHY is still initialising, no valid PHY ID will be
read and on phy_find_first() the bind() function will fail.

If an external PHY is present, wait the maximum time specified
in 802.3 45.2.7.1.1.

Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221115114434.9991-2-alexandru.tachici@analog.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: usb: qmi_wwan: add Telit 0x103a composition

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet

Signed-off-by: Enrico Sau <enrico.sau@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dm-log-writes: set dma_alignment limit in io_hints

This device mapper needs bio vectors to be sized and memory aligned to
the logical block size. Set the minimum required queue limit
accordingly.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221110184501.2451620-6-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm-integrity: set dma_alignment limit in io_hints

This device mapper needs bio vectors to be sized and memory aligned to
the logical block size. Set the minimum required queue limit
accordingly.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221110184501.2451620-5-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: make blk_set_default_limits() private

There are no external users of this function.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221110184501.2451620-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm-crypt: provide dma_alignment limit in io_hints

This device mapper needs bio vectors to be sized and memory aligned to
the logical block size. Set the minimum required queue limit
accordingly.

Link: https://lore.kernel.org/linux-block/20221101001558.648ee024@xps.demsh.org/
Fixes: b1a000d3b8ec5 ("block: relax direct io memory alignment")
Reportred-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Dmitrii Tcvetkov <me@demsh.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20221110184501.2451620-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: make dma_alignment a stacking queue_limit

Device mappers had always been getting the default 511 dma mask, but
the underlying device might have a larger alignment requirement. Since
this value is used to determine alloweable direct-io alignment, this
needs to be a stackable limit.

Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221110184501.2451620-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'imx-fixes-6.1-2' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.1, 2nd round:

- Switch to usb-role-switch for fixing USB device mode on
  tqma8mqml-mba8mx board, so that Dual Role is fully functional.
- A series from Marek Vasut to fix dt-schema warning caused by NAND
  controller size-cells.
- Fix file permission of imx93-pinfunc header.
- Enable OCOTP clock in soc-imx8m driver to fix a kexec kernel hang
  issue.

* tag 'imx-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx8m: Enable OCOTP clock before reading the register
  arm64: dts: imx93-pinfunc: drop execution permission
  arm64: dts: imx8mn: Fix NAND controller size-cells
  arm64: dts: imx8mm: Fix NAND controller size-cells
  ARM: dts: imx7: Fix NAND controller size-cells
  arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR

Link: https://lore.kernel.org/r/20221116090402.GA1274@T480
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'hisi-maintainer-fix' of https://github.com/hisilicon/linux-hisi into arm/fixes

MAINTAINERS file updates for HiSilicon sections

- Use https instead of git for the git trees listed

* tag 'hisi-maintainer-fix' of https://github.com/hisilicon/linux-hisi:
MAINTAINERS: git://github.com -> https://github.com for HiSilicon

Link: https://lore.kernel.org/r/63744BAB.5020307@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

netdevsim: Fix memory leak of nsim_dev->fa_cookie

kmemleak reports this issue:

unreferenced object 0xffff8881bac872d0 (size 8):
  comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
  hex dump (first 8 bytes):
    04 00 00 00 de ad be ef                          ........
  backtrace:
    [<00000000c80b8577>] __kmalloc+0x49/0x150
    [<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
    [<0000000093d78e77>] full_proxy_write+0xf3/0x180
    [<000000005a662c16>] vfs_write+0x1c5/0xaf0
    [<000000007aabf84a>] ksys_write+0xed/0x1c0
    [<000000005f1d2e47>] do_syscall_64+0x3b/0x90
    [<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:

nsim_dev_trap_fa_cookie_write()
  kmalloc() fa_cookie
  nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()

The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove().

Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Link: https://lore.kernel.org/r/1668504625-14698-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'for-linus-6.1-rc6-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
"Two trivial cleanups, and three simple fixes"

* tag 'for-linus-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/platform-pci: use define instead of literal number
  xen/platform-pci: add missing free_irq() in error path
  xen-pciback: Allow setting PCI_MSIX_FLAGS_MASKALL too
  xen/pcpu: fix possible memory leak in register_pcpu()
  x86/xen: Use kstrtobool() instead of strtobool()

Merge tag 'pinctrl-v6.1-4' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"Aere is a hopefully final round of pin control fixes. Nothing special,
  driver fixes and we caught a potential NULL pointer exception.

   - Fix a potential NULL dereference in the core!

   - Fix all pin mux routes in the Rockchop PX30 driver

   - Fix the UFS pins in the Qualcomm SC8280XP driver

   - Fix bias disabling in the Mediatek driver

   - Fix debounce time settings in the Mediatek driver"

* tag 'pinctrl-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: mediatek: Export debounce time tables
  pinctrl: mediatek: Fix EINT pins input debounce time configuration
  pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_map
  pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE
  pinctrl: qcom: sc8280xp: Rectify UFS reset pins
  pinctrl: rockchip: list all pins in a possible mux route for PX30

Merge tag 'platform-drivers-x86-v6.1-4' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

- Surface Pro 9 and Surface Laptop 5 kbd, battery, etc support (this
   is just a few hw-id additions)

- A couple of other hw-id / DMI-quirk additions

- A few small bug fixes + 1 build fix

* tag 'platform-drivers-x86-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables
  platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops
  platform/x86: hp-wmi: Ignore Smart Experience App event
  platform/surface: aggregator_registry: Add support for Surface Laptop 5
  platform/surface: aggregator_registry: Add support for Surface Pro 9
  platform/surface: aggregator: Do not check for repeated unsequenced packets
  platform/x86: acer-wmi: Enable SW_TABLET_MODE on Switch V 10 (SW5-017)
  platform/x86: asus-wmi: add missing pci_dev_put() in asus_wmi_set_xusb2pr()
  platform/x86/intel: pmc: Don't unconditionally attach Intel PMC when virtualized
  platform/x86: thinkpad_acpi: Enable s2idle quirk for 21A1 machine type
  platform/x86/amd: pmc: Add new ACPI ID AMDI0009
  platform/x86/amd: pmc: Remove more CONFIG_DEBUG_FS checks

USB: serial: option: add u-blox LARA-L6 modem

Add LARA-L6 PIDs for three different USB compositions.

LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface

In default mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions

In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface

In CDC-ECM mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
[ johan: drop PID defines in favour of comments ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

USB: serial: option: add u-blox LARA-R6 00B modem

The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not
implement a QMI interface on port 4, the reservation (RSVD(4)) has been
added to meet other companies that implement QMI on that interface.

LARA-R6 00B USB composition exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

USB: serial: option: remove old LARA-R6 PID

Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final
product uses a new USB composition with different PID. 0x90fa PID used
only by LARA-R6 internal prototypes.

Move 0x90fa PID directly in the option_ids array since used by other
Qualcomm based modem vendors as pointed out in:

https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com

Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>

mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()

pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before amd_probe() returns. There is no problem for the 'smbus_dev ==
NULL' branch because pci_dev_put() can also handle the NULL input
parameter case.

Fixes: 659c9bc114a8 ("mmc: sdhci-pci: Build o2micro support in the same module")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

tcp: configurable source port perturb table size

On embedded systems with little memory and no relevant
security concerns, it is beneficial to reduce the size
of the table.

Reducing the size from 2^16 to 2^8 saves 255 KiB
of kernel RAM.

Makes the table size configurable as an expert option.

The size was previously increased from 2^8 to 2^16
in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to
2^16").

Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout

The SD card is recognized failed sometimes when resume from suspend.
Because CD# debounce time too long then card present report wrong.
Finally, card is recognized failed.

Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

mmc: core: properly select voltage range without power cycle

In mmc_select_voltage(), if there is no full power cycle, the voltage
range selected at the end of the function will be on a single range
(e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V),
the mask shift should be reduced by 1.

This issue was triggered by using a specific SD-card (Verbatim Premium
16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes
and there is no power cycle. And the card was failing to switch to
high-speed mode. When adding the range 3.2V/3.3V for this card with the
proposed shift change, the card can switch to high-speed mode.

Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

l2tp: Serialize access to sk_user_data with sk_callback_lock

sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.

l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.

We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.

v4:
- serialize write to sk_user_data in l2tp sk_destruct

v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data

v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags

Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390: avoid using global register for current_stack_pointer

Commit 30de14b1884b ("s390: current_stack_pointer shouldn't be a
function") made current_stack_pointer a global register variable like
on many other architectures. Unfortunately on s390 it uncovers old
gcc bug which is fixed only since gcc-9.1 [gcc commit 3ad7fed1cc87
("S/390: Fix PR89775. Stackpointer save/restore instructions removed")]
and backported to gcc-8.4 and later. Due to this bug gcc versions prior
to 8.4 generate broken code which leads to stack corruptions.

Current minimal gcc version required to build the kernel is declared
as 5.1. It is not possible to fix all old gcc versions, so work
around this problem by avoiding using global register variable for
current_stack_pointer.

Fixes: 30de14b1884b ("s390: current_stack_pointer shouldn't be a function")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/dcssblk: fix deadlock when adding a DCSS

After the rework from commit 1ebe2e5f9d68 ("block: remove
GENHD_FL_EXT_DEVT"), when calling device_add_disk(), dcssblk will end up
in disk_scan_partitions(), and not break out early w/o GENHD_FL_NO_PART.
This will trigger implicit open/release via blkdev_get/put_whole()
later. dcssblk_release() will then deadlock on dcssblk_devices_sem
semaphore, which is already held from dcssblk_add_store() when calling
device_add_disk().

dcssblk does not support partitions (DCSSBLK_MINORS_PER_DISK == 1), and
never scanned partitions before. Therefore restore the previous
behavior, and explicitly disallow partition scanning by setting the
GENHD_FL_NO_PART flag. This will also prevent this deadlock scenario.

Fixes: 1ebe2e5f9d68 ("block: remove GENHD_FL_EXT_DEVT")
Cc: <stable@vger.kernel.org> # 5.17+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

net: thunderbolt: Fix error handling in tbnet_init()

A problem about insmod thunderbolt-net failed is triggered with following
log given while lsmod does not show thunderbolt_net:

insmod: ERROR: could not insert module thunderbolt-net.ko: File exists

The reason is that tbnet_init() returns tb_register_service_driver()
directly without checking its return value, if tb_register_service_driver()
failed, it returns without removing property directory, resulting the
property directory can never be created later.

tbnet_init()
   tb_register_property_dir() # register property directory
   tb_register_service_driver()
     driver_register()
       bus_add_driver()
         priv = kzalloc(...) # OOM happened
   # return without remove property directory

Fix by remove property directory when tb_register_service_driver() returns
error.

Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'microchip-fixes'

Shang XiaoJing says:

====================
net: microchip: Fix potential null-ptr-deref due to create_singlethread_workqueue()

There are some functions call create_singlethread_workqueue() without
checking ret value, and the NULL workqueue_struct pointer may causes
null-ptr-deref. Will be fixed by this patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()

sparx_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:

sparx_stats_init()
    create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL. So as
sparx5_start().

Fixes: af4b11022e2d ("net: sparx5: add ethtool configuration and statistics support")
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()

lan966x_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:

lan966x_stats_init()
    create_singlethread_workqueue() # failed, lan966x->stats_queue is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL.

Fixes: 12c2d0a5b8e2 ("net: lan966x: add ethtool configuration and statistics")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

platform/x86: ideapad-laptop: Add module parameters to match DMI quirk tables

Add module parameters to allow setting the hw_rfkill_switch and
set_fn_lock_led feature flags for testing these on laptops which are not
on the DMI-id based allow lists for these 2 flags.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221115193400.376159-1-hdegoede@redhat.com

platform/x86: ideapad-laptop: Fix interrupt storm on fn-lock toggle on some Yoga laptops

Commit 3ae86d2d4704 ("platform/x86: ideapad-laptop: Fix Legion 5 Fn lock
LED") uses the WMI event-id for the fn-lock event on some Legion 5 laptops
to manually toggle the fn-lock LED because the EC does not do it itself.
However, the same WMI ID is also sent on some Yoga laptops. Here, setting
the fn-lock state is not valid behavior, and causes the EC to spam
interrupts until the laptop is rebooted.

Add a set_fn_lock_led_list[] DMI-id list and only enable the workaround to
manually set the LED on models on this list.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=212671
Cc: Meng Dong <whenov@gmail.com>
Signed-off-by: Arnav Rawat <arnavr3@illinois.edu>
Link: https://lore.kernel.org/r/12093851.O9o76ZdvQC@fedora
[hdegoede@redhat.com: Check DMI-id list only once and store the result]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/x86: hp-wmi: Ignore Smart Experience App event

Sometimes hp-wmi driver complains on system resume:
[ 483.116451] hp_wmi: Unknown event_id - 33 - 0x0

According to HP it's a feature called "HP Smart Experience App" and it's
safe to be ignored.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20221114073842.205392-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

platform/surface: aggregator_registry: Add support for Surface Laptop 5

Add device nodes to enable support for battery and charger status, the
ACPI platform profile, as well as internal HID devices (including
touchpad and keyboard) on the Surface Laptop 5.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

zonefs: Remove to_attr() helper function

to_attr() in zonefs sysfs code is unused, which it causes a warning when
compiling with clang and W=1. Delete it to prevent the warning.

Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

zonefs: fix zone report size in __zonefs_io_error()

When an IO error occurs, the function __zonefs_io_error() is used to
issue a zone report to obtain the latest zone information from the
device. This function gets a zone report for all zones used as storage
for a file, which is always 1 zone except for files representing
aggregated conventional zones.

The number of zones of a zone report for a file is calculated in
__zonefs_io_error() by doing a bit-shift of the inode i_zone_size field,
which is equal to or larger than the device zone size. However, this
calculation does not take into account that the last zone of a zoned
device may be smaller than the zone size reported by bdev_zone_sectors()
(which is used to set the bit shift size). As a result, if an error
occurs for an IO targetting such last smaller zone, the zone report will
ask for 0 zones, leading to an invalid zone report.

Fix this by using the fact that all files require a 1 zone report,
except if the inode i_zone_size field indicates a zone size larger than
the device zone size. This exception case corresponds to a mount with
aggregated conventional zones.

A check for this exception is added to the file inode initialization
during mount. If an invalid setup is detected, emit an error and fail
the mount (check contributed by Johannes Thumshirn).

Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

nvmet: fix a memory leak in nvmet_auth_set_key

When changing dhchap secrets we need to release the old
secrets as well.

kmemleak complaint:
--
unreferenced object 0xffff8c7f44ed8180 (size 64):
  comm "check", pid 7304, jiffies 4295686133 (age 72034.246s)
  hex dump (first 32 bytes):
    44 48 48 43 2d 31 3a 30 30 3a 4c 64 4c 4f 64 71  DHHC-1:00:LdLOdq
    79 56 69 67 77 48 55 32 6d 5a 59 4c 7a 35 59 38  yVigwHU2mZYLz5Y8
  backtrace:
    [<00000000b6fc5071>] kstrdup+0x2e/0x60
    [<00000000f0f4633f>] 0xffffffffc0e07ee6
    [<0000000053006c05>] 0xffffffffc0dff783
    [<00000000419ae922>] configfs_write_iter+0xb1/0x120
    [<000000008183c424>] vfs_write+0x2be/0x3c0
    [<000000009005a2a5>] ksys_write+0x5f/0xe0
    [<00000000cd495c89>] do_syscall_64+0x38/0x90
    [<00000000f2a84ac5>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000

Added a quirk to fix the Netac NV7000 SSD reporting duplicate NGUIDs.

Cc: <stable@vger.kernel.org>
Signed-off-by: Tiago Dias Ferreira <tiagodfer@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

net: dsa: don't leak tagger-owned storage on switch driver unbind

In the initial commit dc452a471dba ("net: dsa: introduce tagger-owned
storage for private and shared data"), we had a call to
tag_ops->disconnect(dst) issued from dsa_tree_free(), which is called at
tree teardown time.

There were problems with connecting to a switch tree as a whole, so this
got reworked to connecting to individual switches within the tree. In
this process, tag_ops->disconnect(ds) was made to be called only from
switch.c (cross-chip notifiers emitted as a result of dynamic tag proto
changes), but the normal driver teardown code path wasn't replaced with
anything.

Solve this problem by adding a function that does the opposite of
dsa_switch_setup_tag_protocol(), which is called from the equivalent
spot in dsa_switch_teardown(). The positioning here also ensures that we
won't have any use-after-free in tagging protocol (*rcv) ops, since the
teardown sequence is as follows:

dsa_tree_teardown
-> dsa_tree_teardown_master
   -> dsa_master_teardown
      -> unsets master->dsa_ptr, making no further packets match the
         ETH_P_XDSA packet type handler
-> dsa_tree_teardown_ports
   -> dsa_port_teardown
      -> dsa_slave_destroy
         -> unregisters DSA net devices, there is even a synchronize_net()
            in unregister_netdevice_many()
-> dsa_tree_teardown_switches
   -> dsa_switch_teardown
      -> dsa_switch_teardown_tag_protocol
         -> finally frees the tagger-owned storage

Fixes: 7f2973149c22 ("net: dsa: make tagging protocols connect to individual switches from a tree")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221114143551.1906361-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/x25: Fix skb leak in x25_lapb_receive_frame()

x25_lapb_receive_frame() using skb_copy() to get a private copy of
skb, the new skb should be freed in the undersized/fragmented skb
error handling path. Otherwise there is a memory leak.

Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()

If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up.
And if phylink_of_phy_connect() fails, nothing needs to be done.
Compile tested only.

Fixes: 892e09153fa3 ("net: ag71xx: port to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

AMerge tag 'netfs-fixes-20221115' of git://git./linux/kernel/git/dhowells/linux-fs

Pull netfx fixes from David Howells:
"Two fixes, affecting the functions that iterates over the pagecache
  unmarking or unlocking pages after an op is complete:

   - xas_for_each() loops must call xas_retry() first thing and
     immediately do a "continue" in the case that the extracted value is
     a special value that indicates that the walk raced with a
     modification. Fix the unlock and unmark loops to do this.

   - The maths in the unlock loop is dodgy as it could, theoretically,
     at some point in the future end up with a starting file pointer
     that is in the middle of a folio. This will cause a subtraction to
     go negative - but the number is unsigned. Fix the maths to use
     absolute file positions instead of relative page indices"

* tag 'netfs-fixes-20221115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Fix dodgy maths
  netfs: Fix missing xas_retry() calls in xarray iteration

drm/display: Don't assume dual mode adaptors support i2c sub-addressing

Current dual mode adaptor ("DP++") detection code assumes that all
adaptors support i2c sub-addressing for read operations from the
DP-HDMI adaptor ID buffer.  It has been observed that multiple
adaptors do not in fact support this, and always return data starting
at register 0.  On affected adaptors, the code fails to read the proper
registers that would identify the device as a type 2 adaptor, and
handles those as type 1, limiting the TMDS clock to 165MHz, even if
the according register would announce a higher TMDS clock.
Fix this by always reading the ID buffer starting from offset 0, and
discarding any bytes before the actual offset of interest.

We tried finding authoritative documentation on whether or not this is
allowed behaviour, but since all the official VESA docs are paywalled,
the best we could come up with was the spec sheet for Texas Instruments'
SNx5DP149 chip family.[1]  It explicitly mentions that sub-addressing is
supported for register writes, but *not* for reads (See NOTE in
section 8.5.3).  Unless TI openly decided to violate the VESA spec, one
could take that as a hint that sub-addressing is in fact not mandated
by VESA.
The other two adaptors affected used the PS8409(A) and the LT8611,
according to the data returned from their ID buffers.

[1] https://www.ti.com/lit/ds/symlink/sn75dp149.pdf

Cc: stable@vger.kernel.org
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Rafael Gieschke <rafael.gieschke@rz.uni-freiburg.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006113314.41101987@computer
Acked-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'erofs-for-6.1-rc6-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fixes from Gao Xiang:
"Most patches randomly fix error paths or corner cases in fscache mode
  reported recently. One fixes an invalid access relating to fragments
  on crafted images.

  Summary:

   - Fix packed_inode invalid access when reading fragments on crafted
     images

   - Add a missing erofs_put_metabuf() in an error path in fscache mode

   - Fix incorrect `count' for unmapped extents in fscache mode

   - Fix use-after-free of fsid and domain_id string when remounting

   - Fix missing xas_retry() in fscache mode"

* tag 'erofs-for-6.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix missing xas_retry() in fscache mode
  erofs: fix use-after-free of fsid and domain_id string
  erofs: get correct count for unmapped range in fscache mode
  erofs: put metabuf in error path in fscache mode
  erofs: fix general protection fault when reading fragment

drm/amd/pm: fix SMU13 runpm hang due to unintentional workaround

The workaround designed for some specific ASICs is wrongly applied
to SMU13 ASICs. That leads to some runpm hang.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pm: enable runpm support over BACO for SMU13.0.7

Enable SMU13.0.7 runpm support.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/pm: enable runpm support over BACO for SMU13.0.0

Enable SMU13.0.0 runpm support.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amdgpu: there is no vbios fb on devices with no display hw (v2)

If we enable virtual display functionality on parts with
no display hardware we can end up trying to check for and
reserve the vbios FB area on devices where it doesn't exist.
Check if display hardware is actually present on the hardware
before trying to reserve the memory.

v2: move the check into common code

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix a memory limit issue

It is to resolve a regression, which fails to allocate
VRAM due to no free memory in application, the reason
is we add check of vram_pin_size for memory limit, and
application is pinning the memory for Peerdirect, KFD
should not count it in memory limit. So removing
vram_pin_size will resolve it.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable BACO support on more cards

Otherwise, some unexpected PCIE AER errors will be observed
in runtime suspend/resume cycle.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: don't enable DRM CRTC degamma property for DCE

DM maps DRM CRTC degamma to DPP (pre-blending) degamma block, but DCE doesn't
support programmable degamma curve anywhere. Currently, a custom degamma is
accepted by DM but just ignored by DCE driver and degamma correction isn't
actually applied. There is no way to map custom degamma in DCE, therefore, DRM
CRTC degamma property shouldn't be enabled for DCE drivers.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Set max for prefetch lines on dcn32

[WHY?]
Max number of lines that can be used for prefetch due to type constraints is
63.75.

[HOW?]
Enforce maximum prefetch lines as 63.75.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: use uclk pstate latency for fw assisted mclk validation dcn32

[WHY?]
DCN32 uses fclk pstate watermarks for dummy pstate, and must always be
supported.

[HOW?]
Validation needs to be run with fclk pstate latency set
as the dummy pstate latency to get correct prefetch and bandwidth outputs.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix prefetch calculations for dcn32

[Description]
Prefetch calculation loop was not exiting until utilizing all of vstartup if it
failed once. Locals need to be reset on each iteration of the loop.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/display: Fix optc2_configure warning on dcn314

[Why]
dcn314 uses optc2_configure_crc() that wraps
optc1_configure_crc() + set additional registers
not applicable to dcn314.
It's not critical but when used leads to warning like:
WARNING: drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c
Call Trace:
<TASK>
generic_reg_set_ex+0x6d/0xe0 [amdgpu]
optc2_configure_crc+0x60/0x80 [amdgpu]
dc_stream_configure_crc+0x129/0x150 [amdgpu]
amdgpu_dm_crtc_configure_crc_source+0x5d/0xe0 [amdgpu]

[How]
Use optc1_configure_crc() directly

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amd/display: Fix calculation for cursor CAB allocation

[Why]
The cursor size (in memory) is currently incorrectly calculated,
resulting not enough CAB being allocated for static screen cursor
in MALL refresh. This results in cursor image corruption.

[How]
Use cursor pitch instead of cursor width when calculating cursor size.
Update num cache lines calculation to use the result of the cursor size
calculation instead of manually recalculating again.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

Revert "drm: hide unregistered connectors from GETCONNECTOR IOCTL"

This reverts commit 981f09295687f856d5345e19c7084aca481c1395.

It turns out this causes logically active but disconnected DP MST
connectors to disappear from the KMS resources list, and Mutter
then assumes the connector is already disabled. Later on Mutter tries
to re-use the same CRTC but fails since on the kernel side it's still
tied to the disconnected DP MST connector.

Signed-off-by: Simon Ser <contact@emersion.fr>
Tested-by: Jonas Ådahl <jadahl@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017153150.60675-1-contact@emersion.fr

drm/amd/display: Support parsing VRAM info v3.0 from VBIOS

[Why]
For DCN3.2 and DCN3.21, VBIOS has switch to using v3.0 of the VRAM
info struct. We should read and override the VRAM info in driver with
values provided by VBIOS to support memory downbin cases.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

x86/cpu: Restore AMD's DE_CFG MSR after resume

DE_CFG contains the LFENCE serializing bit, restore it on resume too.
This is relevant to older families due to the way how they do S3.

Unify and correct naming while at it.

Fixes: e4d0e84e4907 ("x86/cpu/AMD: Make LFENCE a serializing instruction")
Reported-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Reported-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drm/amd/display: Fix invalid DPIA AUX reply causing system hang

[Why]
Some DPIA AUX replies have incorrect data length from original request.
This could lead to overwriting of destination buffer if reply length is
larger, which could cause invalid access to stack since many destination
buffers are declared as local variables.

[How]
Check for invalid length from DPIA AUX replies and trigger a retry if
reply length is not the same as original request. A DRM_WARN() dmesg log
is also produced.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amdgpu: Add psp_13_0_10_ta firmware to modinfo

TA firmware loaded on psp v13_0_10, but it is missing in modinfo.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add HUBP surface flip interrupt handler

On IGT, there is a test named amd_hotplug, and when the subtest basic is
executed on DCN31, we get the following error:

[drm] *ERROR* [CRTC:71:crtc-0] flip_done timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [CRTC:71:crtc-0] commit wait timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [CONNECTOR:88:DP-1] commit wait timed out
[drm] *ERROR* flip_done timed out
[drm] *ERROR* [PLANE:59:plane-3] commit wait timed out

After enable the page flip log with the below command:

echo -n 'format "[PFLIP]" +p' > /sys/kernel/debug/dynamic_debug/control

It is possible to see that the flip was submitted, but DC never replied
back, which generates time-out issues. This is an indication that the
HUBP surface flip is missing. This commit fixes this issue by adding
hubp1_set_flip_int to DCN31.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Fix access timeout to DPIA AUX at boot time

[Why]
Since introduction of patch "Query DPIA HPD status.", link detection at
boot could be accessing DPIA AUX, which will not succeed until
DMUB outbox messaging is enabled and results in below dmesg logs:

[ 160.840227] [drm:amdgpu_dm_process_dmub_aux_transfer_sync [amdgpu]] *ERROR* wait_for_completion_timeout timeout!

[How]
Enable DMUB outbox messaging before link detection at boot time.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

drm/amdgpu: Fix memory leak in amdgpu_cs_pass1

When p->gang_size equals 0, amdgpu_cs_pass1() will return directly
without freeing chunk_array, which will cause a memory leak issue,
this patch fixes it.

Fixes: 4624459c84d7 ("drm/amdgpu: add gang submit frontend v6")
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360

Samsung Galaxy Book Pro 360 (13" 2021 NP930QBD-ke1US) with codec SSID
144d:c1a6 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.

Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1205100
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115170235.18875-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>