staging: fsl-dpaa2/eth: allow the driver to compile multi-arch

Drop dependency on ARCH_LAYERSCAPE (which in turn depends on ARM64),
thus allowing this driver to compile on all architectures supported
by the fsl-mc bus driver.

This was compile tested on:
 - powerpc (corenet_basic_defconfig, ppc64_defconfig)
 - x86 (i386_defconfig, x86_64_defconfig, needs CONFIG_OF)
 - arm64 (defconfig)

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/eth: Use __leXX types where needed

One MC command structure got away with using uXX fields instead
of __leXX. Fix it.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Add missing argument identifier

When running checkpatch over the DPIO code the following warning
is reported:

WARNING: function definition argument 'struct dpaa2_io_notification_ctx *' should also have an identifier name

Add the missing identifier.

Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Fix incorrect masking

In qbman_swp_alt_fq_state(), we need to mask the fqid value
before converting it to little endian, otherwise we write a
wrong value to hardware when running in big endian mode.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Use __leXX types where needed

Structures that are mapped to hardware registers should explicitly
specify the expected endianness for fields larger than 1 byte.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Fix cast truncate warning

Sparse reports the following warning:
drivers/staging/fsl-mc/include/dpaa2-fd.h:421:30:
warning: cast truncates bits from constant value (ffff7fff becomes 7fff)

Fix this by explicitly masking the value with 0xffff.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Replace printk() with more standardize output format.

printk() is the raw way to print output and should be avoided.

For drivers with defined "struct device object", dev_*macro() is
prefer and for "struct netdevice object", netdev_*macro() is prefer over
dev_*macro() to standardize the output format within the subsystem.

If no "struct device object" is defined prefer pr_*macro() over printk().

This patch Replace printk having a log level with the appropriate output
format according to the order of preference.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: Fix incorrect cast

Move the cast in dpaa2_sg_get_addr() to the right place.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use __func__ instead of function name

Replace occurrence of the function name in a string by reference to
__func__, to improve robustness and to conform to the Linux kernel coding
style. Issue found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix typo in comment

Fix typo in the words 'transmitted' and 'failure' in the comment. Issue
found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Reviewed-by: Vaishali Thakkar <vthakkar@vaishalithakkar.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: Remove unnecessary usage of BUG_ON().

There is no need for the calls to BUG_ON() in this driver, which are
used to check if mbo or mbo->context are NULL; mbo is never NULL, and
if mbo->context is NULL it would have already been dereferenced and
oopsed before reaching the BUG_ON().

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove VLA usage

The kernel would like to have all stack VLA usage removed[1]. This switches
to a simple kasprintf() instead, and in the process fixes an off-by-one
between the allocation and the sprintf (allocation did not include NULL
byte in calculation).

[1] https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove yield() call

Remove yield() call. In this case it's use is considered broken, since
it is being assumed that yield() will let another process run that will
make the event true.

Signed-off-by: Thomas Avery <tavery321@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for paRamp enum

Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <paRamp>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for Address variables

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <nodeAddress>
  CHECK: Avoid CamelCase: <broadcastAddress>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for address_filtering enum

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <filteringOff>
  CHECK: Avoid CamelCase: <nodeAddress>
  CHECK: Avoid CamelCase: <nodeOrBroadcastAddress>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for afterSyncInterrupt

Fixes checkpatch warning:

  CHECK: Avoid CamelCase: <afterSyncInterrupt>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for flag enum

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <modeSwitchCompleted>
  CHECK: Avoid CamelCase: <readyToReceive>
  CHECK: Avoid CamelCase: <readyToSend>
  CHECK: Avoid CamelCase: <pllLocked>
  CHECK: Avoid CamelCase: <rssiExceededThreshold>
  CHECK: Avoid CamelCase: <syncAddressMatch>
  CHECK: Avoid CamelCase: <packetSent>
  CHECK: Avoid CamelCase: <crcOk>
  CHECK: Avoid CamelCase: <batteryLow>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: pi433: fix CamelCase for packetFormat enum

Fixes checkpatch warnings:

  CHECK: Avoid CamelCase: <packetFormat>
  CHECK: Avoid CamelCase: <packetLengthFix>
  CHECK: Avoid CamelCase: <packetLengthVar>

Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "staging: Disable lustre file system for MIPS, SH, and XTENSA"

This reverts commit 16f1eeb660bd2bfd223704ee6350706b39c55a7a.

The reason for this patch was that lustre used copy_from_user_page.
Commit 76133e66b141 ("staging/lustre: Replace jobid acquiring with per
node setting") removed that usage.
So the arch restrictions can go.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: allow monolithic builds

Remove restriction the lustre must be built
as modules.  It now works as a monolithic build.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: move thread creation out of module initialization

When the ptlrpc module is loaded, it starts the pinger thread and
calls LNetNIInit which starts various threads.

We don't need these threads until the module is actually being
used, such as when a lustre filesystem is mounted.

So move the thread creation into new ptlrpc_inc_ref() (modeled on
ptlrpcd_inc_ref()), and call that when needed, such as at mount time.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change sai_thread to sai_task.

Rather than allocating a ptlrpc_thread for the
stat-ahead thread, just use the task_struct provided
by kthreads directly.

As nothing ever waits for the sai_task, it must call do_exit()
directly rather than simply return from the function.
Also it cannot use kthread_should_stop() to know when to stop.

There is one caller which can ask it to stop so we need a simple
signaling mechanism.  I've chosen to set ->sai_task to NULL
when the thread should finish up.  The thread notices this and
cleans up and exits.
lli_sa_lock is used to avoid races between waking up the process
and the process exiting.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove 'ptlrpc_thread usage' for sai_agl_thread

Lustre has a 'struct ptlrpc_thread' which provides
control functionality wrapped around kthreads.
None of the functionality used in statahead.c requires
ptlrcp_thread - it can all be done directly with kthreads.

So discard the ptlrpc_thread and just use a task_struct directly.

One particular change worth noting is that in the current
code, the thread performs some start-up actions and then
signals that it is ready to go.  In the new code, the thread
is first created, then the startup actions are perform, then
the thread is woken up.  This means there is no need to wait
any more than kthread_create() already waits.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unused flag from ptlrpc_thread

SVC_EVENT is no longer used.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: use workqueue for pinger

lustre has a "Pinger" kthread which periodically pings peers
to ensure all hosts are functioning.

This can more easily be done using a work queue.

As maintaining contact with other peers is import for
keeping the filesystem running, and as the filesystem might
be involved in freeing memory, it is safest to have a
separate WQ_MEM_RECLAIM workqueue.

The SVC_EVENT functionality to wake up the thread can be
replaced with mod_delayed_work().

Also use round_jiffies_up_relative() rather than setting a
minimum of 1 second delay.  The PING_INTERVAL is measured in
seconds so this meets the need is allow the workqueue to
keep wakeups synchronized.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: use delayed_work in sec_gc

The garbage collection for security contexts currently
has a dedicated kthread which wakes up every 30 minutes
to discard old garbage.

Replace this with a simple delayed_work item on the
system work queue.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: use delayed_work for pools_recalc

ldlm currenty has a kthread which wakes up every so often
and calls ldlm_pools_recalc().
The thread is started and stopped, but no other external interactions
happen.

This can trivially be replaced by a delayed_work if we have
ldlm_pools_recalc() reschedule the work rather than just report
when to do that.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: use workqueue for zombie management.

obdclass currently maintains two lists of data structures
(imports and exports), and a kthread which will free
anything on either list.  The thread is woken whenever
anything is added to either list.

This is exactly the sort of thing that workqueues exist for.

So discard the zombie kthread and the lists and locks, and
create a single workqueue.  Each obd_import and obd_export
gets a work_struct to attach to this workqueue.

This requires a small change to import_sec_validate_get()
which was testing if an obd_import was on the zombie
list.  This cannot have every safely found it to be
on the list (as it could be freed asynchronously)
so it must be dead code.

We could use system_wq instead of creating a dedicated
zombie_wq, but as we occasionally want to flush all pending
work, it is a little nicer to only have to wait for our own
work items.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: change GFP_NOFS to GFP_KERNEL

These allocations are performed during initialization,
so they don't need GFP_NOFS.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: get entropy from nid when nid set.

When the 'lustre' module is loaded, it gets a list of
net devices and uses the node ids to  add entropy
to the prng.  This means that the network interfaces need
to be configured before the module is loaded, which prevents
the module from being compiled into a monolithic kernel.

So move this entropy addition to the moment when
the interface is imported to LNet and the node id is first known.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: keep ln_nportals consistent

ln_nportals should be zero when no portals have
been allocated.  This ensures that memory allocation failure
is handled correctly elsewhere.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: don't require lct_owner to be non-NULL.

Some places in lu_object.c allow lct_owner to be NULL, implying
that the code is built in to the kernel (not a module), but
two places don't.  This prevents us from building lustre into
the kernel.

So remove the requirement and always allow lct_owner to be NULL.

This requires removing an "assert" that the module count is positive,
but this is redundant as module_put() already does the necessary test.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: statahead: remove incorrect test on agl_list_empty()

Including agl_list_empty() in the wait_event_idle() condition
is pointless as the body of the loop doesn't do anything
about the agl list.
So if the list wasn't empty, the while loop would spin
indefinitely.

The test was removed in the lustre-release commit
672ab0e00d61 ("LU-3270 statahead: small fixes and cleanup"),
but not in the Linux commit 5231f7651c55 ("staging: lustre:
statahead: small fixes and cleanup").

Fixes: 5231f7651c55 ("staging: lustre: statahead: small fixes and cleanup")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix bug in osc_enter_cache_try

The lustre-release patch commit bdc5bb52c554 ("LU-4933 osc:
Automatically increase the max_dirty_mb") changed

-       if (cli->cl_dirty + PAGE_CACHE_SIZE <= cli->cl_dirty_max &&
+       if (cli->cl_dirty_pages < cli->cl_dirty_max_pages &&

When this patch landed in Linux a couple of years later, it landed as

-       if (cli->cl_dirty + PAGE_SIZE <= cli->cl_dirty_max &&
+       if (cli->cl_dirty_pages <= cli->cl_dirty_max_pages &&

which is clearly different ('<=' vs '<'), and allows cl_dirty_pages to
increase beyond cl_dirty_max_pages - which causes a latter assertion
to fails.

Fixes: 3147b268400a ("staging: lustre: osc: Automatically increase the max_dirty_mb")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd_mount: use correct niduuid suffix.

Commit 4f016420d368 ("Staging: lustre: obdclass: Use kasprintf") moved
some sprintf() calls earlier in the code to combine them with
memory allocation and create kasprintf() calls.

In one case, this code movement moved the sprintf to a location where the
values being formatter were different.
In particular
       sprintf(niduuid, "%s_%x", mgcname, i);
was move from *after* the line
        i = 0;
to a location where the value of 'i' was at least 1.

This cause the wrong name to be formatted, and triggers

       CERROR("del MDC UUID %s failed: rc = %d\n",
              niduuid, rc);

at unmount time.

So use '0' instead of 'i'.

Fixes: 4f016420d368 ("Staging: lustre: obdclass: Use kasprintf")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove else after return statement

Remove else after a return statement as it is not useful. Issue found
using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: remove unused function

gcc warns that function 'qbman_pull_desc_set_token' is not used.

drivers/staging/fsl-mc/bus/dpio/qbman-portal.c:525:13: warning: ‘qbman_pull_desc_set_token’ defined but not used [-Wunused-function]

In the current code we remove that function.

Fixes: 321eecb06bfb ("bus: fsl-mc: dpio: add QBMan portal APIs for DPAA2")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u16DummyReasonCode to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in handle_rcvd_ntwrk_info()

Fix 'line over 80 character' issues found by checkpatch.pl script by
use of temporary variable and avoided leading tab.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename handle_connect_timeout() variables to avoid camelCase

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in wilc_scan_complete_received()

Fix 'line over 80 character' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in wilc_del_allstation() & wilc_deinit()

Fix 'line over 80 characters' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in wilc_add_ptk()

Fix 'line over 80 characters' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrHostIFkeyAttr to avoid camelCase issue

Fix 'Avoid camelCase' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in host_int_parse_join_bss_param()

Fix 'line over 80 characters' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char for wilc_gnrl_async_info_received()

Fix 'line over 80 char' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in wilc_network_info_received()

Fix 'line over 80 character' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in handle_cfg_param()

Fix 'line over 80 char' issues found by checkpatch.pl script in
handle_cfg_param(). Rename variables and used temporary variables
to fix the line over 80 characters issue.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove always 'true' check from 'if' statement

Fix few smatch warning related to 'warn: always true condition'.

handle_cfg_param() warn: always true condition
'(cfg_param_attr->auth_timeout < 65536) => (0-u16max < 65536)'
handle_cfg_param() warn: always true condition
'(cfg_param_attr->rts_threshold < 65536) => (0-u16max < 65536)'
handle_cfg_param() warn: always true condition
'(cfg_param_attr->beacon_interval < 65536) => (0-u16max < 65536)'
handle_cfg_param() warn: always true condition
'(cfg_param_attr->site_survey_scan_time < 65536) => (0-u16max <
65536)'
handle_cfg_param() warn: always true condition
'(cfg_param_attr->active_scan_time < 65536) => (0-u16max < 65536)'
handle_cfg_param() warn: always true condition
'(cfg_param_attr->passive_scan_time < 65536) => (0-u16max < 65536)'

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename enuEvent to avoid camelCase

Fix "Avoid camelCase" issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in wilc_wlan_handle_rxq()

Refactor wilc_wlan_handle_rxq() to fix line over 80 character issue
found by checkpatch.pl script. Added a new function to split
'wilc_wlan_handle_rxq' function code.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix line over 80 char in wilc_wlan_cfg_set()

Fix 'line over 80 characters' issue found by checkpatch.pl script.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix open parenthesis mismatch in wilc_wlan_cfg_get()

Fix 'Alignment should match open parenthesis' issue found by
checkpatch.pl script. Reduce the leading tab, to make space for open
parenthesis match.

Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: Indent function parameter.

Indent the parameters for a function call that extends past 80 characters.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: Add a blank line.

Use a blank line after components_show() function declaration.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Replace literal with constant.

Replace literal bytestring with CIPHER_ID_WPA_WEP40 constant.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: emxx_udc: Remove unnecessary NULL checks

These pointers can't be NULL so I have removed the checks.

The checking was sort of problematic as well because it didn't make
sense.  In _nbu2ss_read_request_data() the && should have been ||.  In
nbu2ss_gad_get_frame() we know that "pgadget" is non-NULL and "udc" is
an offset from "pgadget" so it can't be NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: Remove dead FRAGMENTS_T

It's not used in-tree, or in the downstream tree.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace NULL comparison with variable

Replace NULL comparison of the variable with the variable name or
!variable to conform to the Linux kernel coding style. Issue found using
checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: place constant on the right side of test

Place constants on the right side of the test during comparisons to
conform to the Linux kernel coding style. Issue found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Replace memset with eth_zero_addr

Use eth_zero_addr to assign zero address to the given address array
instead of memset when the second argument in memset is address
of zero. Coccinelle was used to do the replacement and add the
header file linux/etherdevice.h if not already present.

The Coccinelle semantic patch that makes this change is as follows:
@header@
@@
#include <linux/etherdevice.h>

@r1@
expression e;
@@

-memset(e,0x00,ETH_ALEN);
+eth_zero_addr(e);

@includeheader depends on r1 && !header@
@@
+ #include <linux/etherdevice.h>
#include <...>

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: Remove unnecessary semicolon.

Remove unnecessary semicolon using semicolon.cocci Coccinelle script.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Add spaces around operators.

Add spaces around arithmetic and bitwise operators to improve
readability of the code.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove unnecessary parentheses

Remove unnecessary parentheses between 'address-of' operators
and a struct members.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix issues regarding blank lines

Fix multiple blank lines and blank lines after braces.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: remove unnecessary parentheses

Remove unnecessary parentheses around variables to conform to the Linux
kernel coding style. Issue found using checkpatch.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Add spaces around '|'

Add spaces around '|' to conform to the Linux
kernel coding style. Issue found using checkpatch.
CHECK: spaces preferred around that '|'.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Added spaces around '+'

Add spaces around arithmetic operator '+',  to conform to the Linux
kernel coding style. Issue found using checkpatch.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove multiple blank line(s)

Remove extra blank line(s) to conform to the Linux
kernel coding style. Issue found using checkpatch.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: match alignment with open parenthesis

Delete/Add tabs and spaces to align the code to fix the
checkpatch issue: "CHECK: Alignment should match open parenthesis".

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Fixed 'tabstop' coding style warning

Replace a mix of tabs and spaces indentation by tabs only.

Fixed checkpatch warning "Statements should start on a tabstop".

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: bcm2835-audio: Change to unsigned int *

Change 'unsigned *' to 'unsigned int *'. Issue found with checkpatch.

Signed-off-by: Nishka Dasgupta <nishka.dasgupta_ug18@ashoka.edu.in>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: bcm2835-audio Format multiline comment

Format multiline comment by moving '*/' to a new line. Issue found with
checkpatch.

Signed-off-by: Nishka Dasgupta <nishka.dasgupta_ug18@ashoka.edu.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vc04_services: bcm2835-audio: Add blank line after declaration

Add blank line after declaration. Issue found with checkpatch.

Signed-off-by: Nishka Dasgupta <nishka.dasgupta_ug18@ashoka.edu.in>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtlwifi: Remove nonessential semicolon

Remove non-essential semicolon after 'else' and 'switch' statements. Issue
found using semicolon.cocci Coccinelle script.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtlwifi: remove unneeded semicolon

Remove unneeded semicolon after 'while' and 'switch' statements. Issue
found using semicolon.cocci Coccinelle script.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtlwifi: remove condition where it has no effect

Remove condition where if and else branch are identical.
Issue found using cond_no_effect.cocci Coccinelle script.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Fix style violation for line ending in '('

Replace line ending with '(' with function parameters to resolve
style issue found by checkpath.

Signed-off-by: Rinkle Jain <rinklejain96@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unnecessary parentheses

Remove unnecessary parentheses around variables to conform to the Linux
kernel coding style. Issue found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: Replace 'unsigned' with 'unsigned int'

Replace 'unsigned' with 'unsigned int' to improve readability.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: Add 'const' to char* array

Replace 'const char*' arrays with 'const char * const'
since the values in the arrays are not changed.
Issues found with checkpatch.pl

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: Fix comparison to NULL

Replace comparison to NULL with a 'not' operator.
Issue found with checkpatch.

Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Replace "dont" with "don't"

Replace "dont" with "don't".
"Dont" is not same as "Do not" or "Don't".

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Replace "to to" with "to"

This patch replace "to to" with "to".

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Replace "be be" with "be"

This patch replace "be be" with "be".

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Replace "dont" with "don't

Replace "dont" with "don't".
"Dont" is not same as "Do not" or "Don't".

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: speakup: match alignment with open parenthesis

Match alignment with the open parenthesis to conform to the Linux kernel
coding style. Issue found using checkpatch.

Signed-off-by: Santha Meena Ramamoorthy <santhameena13@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: Cleanup dpbp and dpcon API

Some functions and associated structures are not used by current code,
so remove them.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Replace local frame type constants with kernel constants.

This driver defined constants FRAME_TYPE_* to represent frame control
field codes; however, these constants are already defined in the header
'linux/ieee80211.h' as  IEEE80211_STYPE_*.  This change removes the locally
defined constants and substitutes the kernel's constants.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Replace local capability constants with kernel constants.

This driver defined constants BSS_CAP_* to represent WLAN capability
codes; however, these constants are already defined in the header
'linux/ieee80211.h' as WLAN_CAPABILITY_*.  This change removes the locally
defined constants and substitutes the kernel's constants.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Factor out repeated code into function 'ks_wlan_cap()'.

The code that generates a WLAN capability mask is repeated in five
functions.  This change refactors that code into a new function, which is
called now in each of those functions.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Replace SSID_MAX_SIZE with IEEE80211_MAX_SSID_LEN.

SSID_MAX_SIZE is a constant defined locally in ks_hostif.h, but it should
be replaced with IEEE80211_MAX_SSID_LEN from the kernel's 802.11 header,
of which it is just a copy.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ks7010: Use constants from ieee80211_eid instead of literal ints.

The case statement in get_ap_information() should not use literal integers
to parse information element IDs when these values are provided by name
in 'enum ieee80211_eid' in the header 'linux/ieee80211.h'.

Signed-off-by: Quytelda Kahja <quytelda@tamalin.org>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:r8188eu: use lib80211 CCMP decrypt

Custom AES decrypt implementation replaced with lib80211 library.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723bs: fix u8 less than zero check

The error variable ret is currently a u8 and so two comparisons
to see if an error return is less than zero will always be false
because ret is unsigned.  Fix this by making ret an int.

Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove unnecessary blank lines

Remove unnecessary blank lines found using checkpatch.pl script.

Signed-off-by: Jeremy Fertic <jeremyfertic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: qbman_pull_desc_set_token() can be static

Fixes: 1628e2e4dc76 ("staging: fsl-mc/dpio: allow the driver to compile multi-arch")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-dpaa2/eth: Fix incorrect casts

The DPAA2 Ethernet driver incorrectly assumes virtual addresses
are always 64b long, which causes compiler errors when building
for a 32b platform.

Fix this by using explicit casts to uintptr_t where necessary.

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc/dpio: allow the driver to compile multi-arch

Drop dependency on ARCH_LAYERSCAPE (which in turn depends on ARM64),
thus allowing this driver to compile on all architectures supported
by the fsl-mc bus driver.

This was compile tested on:
 - powerpc (corenet_basic_defconfig, ppc64_defconfig)
 - x86 (i386_defconfig, x86_64_defconfig, needs CONFIG_OF)
 - arm64 (defconfig)

Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>