Kaaira Gupta [Fri, 13 Mar 2020 21:54:04 +0000 (03:24 +0530)]
staging: media: imx: remove temporary variable
Remove unnecessary local variable `ret` in file `imx6-mipi-csi2.c` and
directly returning the value assigned to `ret.`
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200313215406.2485-3-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Fri, 13 Mar 2020 21:54:03 +0000 (03:24 +0530)]
staging: media: allegro: align with parenthesis
Align the lines of allegro-core.c with open parenthesis by giving proper
tabs and thereby fix checkpatch.pl warnings of matching alignment with
open parenthesis. Do it only for lines where character limit doesn't
exceed 80 characters.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200313215406.2485-2-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Fri, 13 Mar 2020 18:27:58 +0000 (23:57 +0530)]
staging: media: imgu: Remove extra type detail
Remove unwanted variable type detail as detected by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200313182754.GA20501@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John B. Wyatt IV [Mon, 16 Mar 2020 22:15:44 +0000 (15:15 -0700)]
staging: wlan-ng: Fix line going over 80 characters
Add a newline before the second argument for style, readability, and
consistency.
Please note: checkpatch reports the third argument as being over 80
characters, but not the second argument.
Signed-off-by: John B. Wyatt IV <jbwyatt4@gmail.com>
Link: https://lore.kernel.org/r/20200316221544.1251350-1-jbwyatt4@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Sun, 15 Mar 2020 22:12:47 +0000 (23:12 +0100)]
staging: speakup: main: switch multiple assignment for one assignment per line
One assignment per line is preferred, instead of multiple assignments.
To make it more readable.
Issue found with checkpatch.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Samuel Thibautl <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20200315221247.16629-1-lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 15 Mar 2020 16:01:54 +0000 (17:01 +0100)]
staging: mt7621-pci-phy: add 'mt7621_phy_rmw' to simplify code
In order to simplify driver code and decrease a bit LOC add new
function 'mt7621_phy_rmw' where clear and set bits are passed as
arguments.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200315160154.10292-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Thu, 12 Mar 2020 19:06:24 +0000 (00:36 +0530)]
staging: qlge: qlge_ethtool.c: remove an unneeded variable
Remove unneeded temporary local variable, cleanup suggested by coccinelle.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200312190624.24167-5-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Thu, 12 Mar 2020 19:06:23 +0000 (00:36 +0530)]
staging: qlge: qlge_dbg.c: remove an unneeded variable
Remove unneeded temporary local variable, cleanup suggested by coccinelle.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200312190624.24167-4-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Thu, 12 Mar 2020 19:06:22 +0000 (00:36 +0530)]
staging: qlge: qlge_mpi.c: remove an unneeded variable
Remove unneeded temporary local variable, cleanup suggested by coccinelle.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200312190624.24167-3-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Thu, 12 Mar 2020 19:06:21 +0000 (00:36 +0530)]
staging: qlge: qlge_main.c: remove an unneeded variable
Remove unneeded temporary local variable, cleanup suggested by coccinelle.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200312190624.24167-2-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Sat, 14 Mar 2020 23:46:08 +0000 (00:46 +0100)]
staging: qlge: qlge_main: remove unused code
Remove commented out lines. They are not used since 2009.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/5511d6c142a8f045360af147528db8662f82787f.1584228792.git.lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Sat, 14 Mar 2020 23:46:07 +0000 (00:46 +0100)]
staging: qlge: qlge_dbg: remove unneeded spaces
Remove spaces after type casting operators in order to comply codding
standards.
Issue found with checkpatch.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/9a7c4bef601322c2c4d58d09b277a4a6ab82bd93.1584228792.git.lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gokce Kuler [Mon, 16 Mar 2020 15:10:09 +0000 (18:10 +0300)]
staging: wilc1000: rearrange line exceeding 80 characters
Moved to the bottom line after && operator for it exceeds 80 character
Signed-off-by: Gokce Kuler <gokcekuler@gmail.com>
Link: https://lore.kernel.org/r/20200316151009.GA7604@siyah2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreeya Patel [Fri, 13 Mar 2020 11:24:51 +0000 (16:54 +0530)]
Staging: wilc1000: cfg80211: Use kmemdup instead of kmalloc and memcpy
Replace calls to kmalloc followed by a memcpy with a direct call to
kmemdup.
The Coccinelle semantic patch used to make this change is as follows:
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200313112451.25610-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Sun, 15 Mar 2020 04:49:22 +0000 (05:49 +0100)]
staging: wfx: remove unneeded spaces
Remove spaces after type casting operators in order to comply codding
standards.
Issue found with checkpatch.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200315044922.14249-1-lu@pplo.net
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 13 Mar 2020 20:09:13 +0000 (21:09 +0100)]
staging: mt7621-pci: delete no more needed 'mt7621_reset_port'
After review all the resets at the beggining the function
'mt7621_reset_port' is not needed anymore. Hence delete it
and its uses.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200313200913.24321-7-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 13 Mar 2020 20:09:12 +0000 (21:09 +0100)]
staging: mt7621-pci: release gpios after pci initialization
R3G's LEDs fail to initialize because one of them uses GPIO8
Hence, release the GPIO resources after PCIe initialization
and properly release also in driver error path.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200313200913.24321-6-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 13 Mar 2020 20:09:11 +0000 (21:09 +0100)]
staging: mt7621-pci: bindings: update doc accordly to last changes
Properly update bindings documentation with added 'reset-gpios'
property. Delete also 'perst-gpio' which is not being used anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200313200913.24321-5-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 13 Mar 2020 20:09:10 +0000 (21:09 +0100)]
staging: mt7621-dts: make use of 'reset-gpios' property for pci
Properly set pins for group pcie as 'gpio' function and declare
gpio's in the pci node to make reset stuff properly functional.
Delete no more needed general reset and previous pers gpio which
is now being used in 'reset-gpios' property.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200313200913.24321-4-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 13 Mar 2020 20:09:09 +0000 (21:09 +0100)]
staging: mt7621-pci: change value for 'PERST_DELAY_MS'
Value of 'PERST_DELAY_MS' is too high and it is ok just
to set up to 100 ms. Update also define name from
'PERST_DELAY_US' into 'PERST_DELAY_MS'
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200313200913.24321-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Fri, 13 Mar 2020 20:09:08 +0000 (21:09 +0100)]
staging: mt7621-pci: use gpios for properly reset
Original driver code was using three gpio's for reset
asserts and deasserts the pcis. Instead of using that
a general reset control with a perst gpio was introduced
and it seems it is partially working but sometimes there
are some unexpected hangs on boot. This commit make use of
the three original gpios using 'reset-gpios' property of
the device tree and removes the reset line and perst gpio.
According to the mediatek aplication note v0.1 there are
three gpios used for pcie ports reset control: gpio#19,
gpio#8 and gpio#7 for slots 0, 1 and 2 respectively.
This schema can be used separately for mt7621A but in some
boards due to pin share issue, if the PCM and I2S function
are enable at the same time, there are no enough GPIO to
control per-port PCIe reset. In those cases gpio#19 is enought
for reset the three ports together. Because of this we just
try to get the three gpios but if some of them fail we are not
failing in boot process, just prints a kernel notice and take
after into account if the descriptor is or not valid in order
to use it. All of them are set as GPIO output low configuration.
The gpio descriptor's API takes device tree property into account
and invert value if the pin is configured as active low.
So we also have to properly request pins from device tree
and set values correct in assert and deassert functions.
After this changes the order to make all assert and
deassert in the 'probe' process makes more sense:
* Parse device tree.
* make assert of the RC's and EP's before doing anything else.
* make deassert of the RC's before initializing the phy.
* Init the phy.
* make deassert of the EP's before initialize pci ports.
* Normal PCI initialization.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200313200913.24321-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 12 Mar 2020 21:37:39 +0000 (22:37 +0100)]
staging: bcm2835-camera: Use designators to init V4L2 controls
The initializer lists for the V4L2 controls are hard to read.
So improve this by using designators.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/1584049059-6772-3-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren [Thu, 12 Mar 2020 21:37:38 +0000 (22:37 +0100)]
staging: bcm2835-camera: Drop unused ignore_errors flag
The struct bm2835_mmal_v4l2_ctrl contains an ignore_errors flag which
was always set to false. So drop the unused flag.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/1584049059-6772-2-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Camylla Goncalves Cantanheide [Tue, 17 Mar 2020 08:51:30 +0000 (08:51 +0000)]
staging: rtl8192u: Corrects 'Avoid CamelCase' for variables
The variables of function setKey triggered a 'Avoid CamelCase'
warning from checkpatch.pl. This patch renames these
variables to correct this warning.
Signed-off-by: Camylla Goncalves Cantanheide <c.cantanheide@gmail.com>
Link: https://lore.kernel.org/r/20200317085130.21213-2-c.cantanheide@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Camylla Goncalves Cantanheide [Tue, 17 Mar 2020 08:51:29 +0000 (08:51 +0000)]
staging: rtl8192u: Using function name as string
Solves the following checkpatch.pl for a triggered function:
WARNING: Prefer using '"%s...", __func__' to using 'setKey',
this function's name, in a string
Signed-off-by: Camylla Goncalves Cantanheide <c.cantanheide@gmail.com>
Link: https://lore.kernel.org/r/20200317085130.21213-1-c.cantanheide@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Camylla Goncalves Cantanheide [Tue, 17 Mar 2020 07:19:59 +0000 (07:19 +0000)]
staging: rtl8192u: Replaces symbolic permissions with octal permissions
Solves following checkpatch.pl issue:
WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider
using octal permissions '0444'.
Signed-off-by: Camylla Goncalves Cantanheide <c.cantanheide@gmail.com>
Link: https://lore.kernel.org/r/20200317071959.556-1-c.cantanheide@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Thu, 12 Mar 2020 19:03:49 +0000 (20:03 +0100)]
staging: greybus: i2c: remove unused pointers
Remove unused pointers in gb_i2c_algorithm structure and gb_i2c_probe()
function, as they are not touched since 2014.
Suggested-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200312190349.7892-1-lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sun, 15 Mar 2020 23:42:32 +0000 (05:12 +0530)]
staging: fbtft: Avoid potential precedence issues
Put parentheses around uses of macro parameters to avoid possible
precedence issues. Problem detected by checkpatch.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/5c8520a5c3da453460608deee9a25232d52f4513.1584314604.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sun, 15 Mar 2020 23:42:08 +0000 (05:12 +0530)]
staging: fbtft: simplify array index computation
An array index is being computed by mathematical calculation on the
Lvalue side of the expression. This also further results in the statement
exceeding 80 character statement length.
A local variable can store the value of the array index computation. The
variable can then be used as array index. This improves readability of
the code and also address 80 character warning raised by checkpatch.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/4bf407e1b3e05745f767b2bad6218c9fb836d869.1584314604.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sun, 15 Mar 2020 23:41:34 +0000 (05:11 +0530)]
staging: fbtft: Reformat long macro definitions
Multiple macro definitions crossing 80 character line length makes them
hard to understand. Reformatting the these lines makes the code more
readable and easier to understand. Issue flagged by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/b8d2fc0f55339830694ee51860cc970ce1b9cae4.1584314604.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sun, 15 Mar 2020 23:41:06 +0000 (05:11 +0530)]
staging: fbtft: Reformat line over 80 characters
A long variable name beyond 80 characters extends into the next
line. Reformatting the line makes it more readable. Also adding an extra
line for the next instruction following current if block helps
understand it better.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/027ccfa893feafc25da273b4b4de444d7a466cfd.1584314603.git.mh12gx2825@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreeya Patel [Fri, 13 Mar 2020 10:49:20 +0000 (16:19 +0530)]
Staging: rtl8723bs: sdio_halinit: Remove unnecessary conditions
Remove if and else conditions since both are leading to the
initialization of "valueDMATimeout" and "valueDMAPageCount" with
the same value.
Found using coccinelle script.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200313104920.19974-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreeya Patel [Fri, 13 Mar 2020 10:29:12 +0000 (15:59 +0530)]
Staging: rtl8723bs: rtw_mlme: Remove unnecessary conditions
Remove unnecessary if and else conditions since both are leading to the
initialization of "phtpriv->ampdu_enable" with the same value.
Also, remove the unnecessary else-if condition since it does nothing.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200313102912.17218-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sat, 14 Mar 2020 13:58:57 +0000 (19:28 +0530)]
staging: comedi: dt3000: Reformat multiple line dereference
Reformat multiple line dereferences for &cmd->scan_begin_arg. Problem
detected by checkpatch.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200314135852.GA6336@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sat, 14 Mar 2020 17:43:19 +0000 (23:13 +0530)]
staging: comedi: ni_atmio16d: remove commented code blocks
Remove two if# 0 directive code blocks. Problem detected by
checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200314174316.GA10615@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sat, 14 Mar 2020 21:07:53 +0000 (02:37 +0530)]
staging: comedi: ni_mio_common: Code reformat and re-indentation
Resolve general code indentation problems as detected by checkpatch script.
Implement code reformat and re-indentation as per coding style to
improve readability.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200314210749.GA3393@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sat, 14 Mar 2020 21:39:00 +0000 (03:09 +0530)]
staging: comedi: s626: Reformat function arguments
Reformat function call arguments to comedi_check_trigger_arg_min
as per coding style guideline. Problem detected by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200314213856.GA3874@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sat, 14 Mar 2020 21:41:57 +0000 (03:11 +0530)]
staging: comedi: rtd520: Resolve multiline dereference
Reformat multi-line dereferencing of function arguments
&cmd->scan_begin_arg. Problem detected by checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200314214154.GA3904@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Sat, 14 Mar 2020 21:42:57 +0000 (03:12 +0530)]
staging: comedi: ni_tio: Reformat function call arguments
Reformat function call arguments so that the function call is clearly
visible. Issue detected by checkpatch.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200314214254.GA3941@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oscar Carter [Sat, 14 Mar 2020 16:14:41 +0000 (17:14 +0100)]
staging: vt6656: Use BIT_ULL() macro instead of bit shift operation
Replace the bit left shift operation with the BIT_ULL() macro and remove
the unnecessary mask off operation against the bit_nr variable.
This mask is only there for legacy reasons. Originally it was 31 (0x1f)
and the bit_nr variable spread across an mc_filter array with two u32
elements. Now, this mask is not needed because its value is 0x3f and the
mc_filter variable is an u64 type.
In this situation, the 26 bit right shift operation against the value
returned by the ether_crc function set the bit_nr variable to the
following value:
bit 31 to bit 6 -> All 0 (due to the bit shift operation happens over an
unsigned type).
bit 5 to bit 0 -> The 6 msb bits of the value returned by the ether_crc
function.
The purpose of the 0x3f mask against the bit_nr variable is to reset
(set to 0) the 26 msb bits (bit 31 to bit 6), but these bits are yet 0.
So, the mask off operation is now unnecessary.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200314161441.4870-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R Veera Kumar [Thu, 12 Mar 2020 09:10:48 +0000 (14:40 +0530)]
staging: rtl8712: Fixes for simple typos in C comments
Fixes for simple typos in C comments.
Found using checkpatch.pl.
Signed-off-by: R Veera Kumar <vkor@vkten.in>
Link: https://lore.kernel.org/r/20200312091042.GA4246@tulip.local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreeya Patel [Wed, 11 Mar 2020 13:17:42 +0000 (18:47 +0530)]
Staging: rtl8188eu: rtw_mlme: Add space around operators
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200311131742.31068-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 11 Mar 2020 09:24:51 +0000 (10:24 +0100)]
staging: rtl8723bs: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-4-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 11 Mar 2020 09:24:50 +0000 (10:24 +0100)]
staging: rtl8192e: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-3-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 11 Mar 2020 09:24:49 +0000 (10:24 +0100)]
staging: rtl8188eu: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311092451.23933-2-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 11 Mar 2020 09:19:44 +0000 (10:19 +0100)]
staging: most: core: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200311091944.23185-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Sat, 7 Mar 2020 08:55:32 +0000 (08:55 +0000)]
staging: wilc1000: updated DT binding documentation
Merged the DT binding documentation of SDIO and SPI into a single file.
Removed documentation for some of the properties which are not required
and handled review comments received in [1] & [2].
[1]. https://lore.kernel.org/linux-wireless/
20200303020230.GA15543@bogus
[2]. https://lore.kernel.org/linux-wireless/
20200303015558.GA6876@bogus
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-4-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Sat, 7 Mar 2020 08:55:29 +0000 (08:55 +0000)]
staging: wilc1000: modified 'clock-names' and 'compatible' property
Modified the 'clock-names' property by removing '_clk' from its name and
remove '_spi/sdio' from 'compatible' string.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-3-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Sat, 7 Mar 2020 08:55:28 +0000 (08:55 +0000)]
staging: wilc1000: use 'interrupts' property instead of 'irq-gpio'
Make use of 'interrupts' property instead of using gpio for handling
the interrupt as suggested in [1].
[1]. https://lore.kernel.org/linux-wireless/
20200303015558.GA6876@bogus
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200307085523.7320-2-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Carlos Henrique Lima Melara [Wed, 11 Mar 2020 01:27:20 +0000 (01:27 +0000)]
staging: qlge: Fix WARNING: Missing a blank line after declarations
Fixed WARNING: Missing a blank line after declarations in qlge_mpi.c to
the following lines:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:94:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:240:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:258:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:356:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:915:
WARNING: Missing a blank line after declarations
FILE: drivers/staging/qlge/qlge_mpi.c:1099:
Signed-off-by: Carlos Henrique Lima Melara <charlesmelara@outlook.com>
Link: https://lore.kernel.org/r/CP2PR80MB434086A44A1ED5BB662B9D70A8FC0@CP2PR80MB4340.lamprd80.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andre Pinto [Wed, 11 Mar 2020 01:26:38 +0000 (01:26 +0000)]
staging: rtl8188eu: fix typo s/informations/information
Fix checkpatch check: 'informations' may be misspelled - perhaps
'information'? in rtw_mlme_ext.c:1151.
Signed-off-by: Andre Pinto <andrealmeidap1996@gmail.com>
Link: https://lore.kernel.org/r/20200311012638.18889-1-andrealmeidap1996@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Tue, 10 Mar 2020 14:09:08 +0000 (15:09 +0100)]
staging: vt6655: power.c: code reformatting for improved readability
Improve line grouping for better understanding the course of action and where
every comment belongs to.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/3fada7fe76047ecf06d0345c0ab9216424a126f2.1583848946.git.lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Tue, 10 Mar 2020 14:09:07 +0000 (15:09 +0100)]
staging: vt6655: power.c: Remove setting ATIM Window in PSvEnablePowerSaving()
Every time priv->op_mode is not NL80211_IFTYPE_ADHOC it sets ATIM Window, but
this feature it is marked TODO in 2014 and did go untouched since 2015.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/d9b8e434e09cb8885026a71441bf3a6919dba3da.1583848946.git.lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Tue, 10 Mar 2020 11:34:59 +0000 (12:34 +0100)]
staging: mt7621-pci: enable clock bit for each port
The clock related code concerns me from the very beginning because
there are some set ups got from legacy driver that are not documented
anywhere. According to the programming guide 0x7c is 'CPE_ROSC_SEL1'
register and 0x80 is 'CPU_CPE_CN'. I do think this set up is not needed
at all and the proper thing to do is just enable the clock bit for each
pcie port. Hence remove useless code and do the right thing which is
setting up the clock bit for each port enabled.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200310113459.30539-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepak R Varma [Tue, 10 Mar 2020 21:25:48 +0000 (02:55 +0530)]
staging: comedi: dt282x: remove old unused code
There are two #if 0 blocks that have no recent history of any change.
Remove those code blocks for improved readability of the code.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200310212545.GA8914@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Tue, 10 Mar 2020 14:25:09 +0000 (19:55 +0530)]
staging: wfx: remove unused structure
struct hif_cnf_reset is not used anywhere in wfx. It's parent file
hif_api_cmd.h is imported form some other driver, hence some functions
in it are not used. This is one of them. Hence remove it.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-7-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Tue, 10 Mar 2020 14:25:08 +0000 (19:55 +0530)]
staging: wfx: remove variable declaration
int ret is uneccessarily declared and 0 assigned to it. Return o
directly instead.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-6-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Tue, 10 Mar 2020 14:25:07 +0000 (19:55 +0530)]
staging: wfx: data_tx.h: remove space after cast
remove extra space after a cast in file data_tx.h
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-5-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Tue, 10 Mar 2020 14:25:06 +0000 (19:55 +0530)]
staging: wfx: dat_tx.c: remove space after a cast
remove extra spaces after casts in file data_tx.c
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-4-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Tue, 10 Mar 2020 14:25:05 +0000 (19:55 +0530)]
staging: wfx: change 1 to bool
policies[i].uploaded is a bool. 1 is assigned to it. Change it to bool.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-3-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kaaira Gupta [Tue, 10 Mar 2020 14:25:04 +0000 (19:55 +0530)]
staging: wfx: data_rx.c: remove space after cast
remove an unesseccary space after a cast in file data_rx.c
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Link: https://lore.kernel.org/r/20200310142509.25632-2-kgupta@es.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 10 Mar 2020 10:54:21 +0000 (11:54 +0100)]
staging: exfat: remove staging version of exfat filesystem
Now that there is a "real" solution for exfat in the vfs tree queued up
to be merged in 5.7-rc1 the "old" exfat code in staging can be removed.
Many thanks to Valdis for doing the work to get this into the tree in
the first place, it was greatly appreciated.
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Pali Rohár <pali@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Sungjong Seo <sj1557.seo@samsung.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20200310105421.GA2810679@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Paracuellos [Sun, 8 Mar 2020 09:19:27 +0000 (10:19 +0100)]
staging: mt7621-pci: simplify 'mt7621_pcie_init_virtual_bridges' function
Function 'mt7621_pcie_init_virtual_bridges' is a bit mess and can be
refactorized properly in a cleaner way. Introduce new 'pcie_rmw' inline
function helper to do clear and set the correct bits this function needs
to work.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20200308091928.17177-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhenzhong Duan [Thu, 5 Mar 2020 07:21:51 +0000 (15:21 +0800)]
staging: speakup: Fix a typo error print for softsynthu device
When softsynthu device fails the register, "/dev/softsynthu" should be
printed instead of "/dev/softsynth".
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: William Hubbs <w.d.hubbs@gmail.com>
Cc: Chris Brannon <chris@the-brannons.com>
Cc: Kirk Reiser <kirk@reisers.ca>
Link: https://lore.kernel.org/r/20200305072151.403-1-zhenzhong.duan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 4 Mar 2020 19:46:02 +0000 (19:46 +0000)]
staging: vt6656: struct vnt_rcb remove unused in_use.
The variable merely toggles true to false and is unused.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/130a4078-2502-a381-46c4-b473815e153b@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Wed, 4 Mar 2020 19:41:55 +0000 (19:41 +0000)]
staging: vt6656: Remove vnt_interrupt_buffer in_use flag.
mac80211 is the only user of in_use to start it and should
not be true when so.
So internal toggling of this variable is not relevant.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/69585034-4318-4bec-7d9b-f64a167df237@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergiu Cuciurean [Wed, 4 Mar 2020 07:43:19 +0000 (09:43 +0200)]
staging: wilc1000: spi: Use new structure for SPI transfer delays
In a recent change to the SPI subsystem in commit <
bebcfd272df6>
("spi: introduce `delay` field for `spi_transfer` +
spi_transfer_delay_exec()"), a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200304074319.22107-1-sergiu.cuciurean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergiu Cuciurean [Wed, 4 Mar 2020 07:37:46 +0000 (09:37 +0200)]
staging: kpc2000: kpc2000_spi: Use new structure for SPI transfer delays
In a recent change to the SPI subsystem in commit <
bebcfd272df6>
("spi: introduce `delay` field for `spi_transfer` +
spi_transfer_delay_exec()"), a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200304073746.19664-1-sergiu.cuciurean@analog.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreeya Patel [Sun, 8 Mar 2020 19:21:52 +0000 (00:51 +0530)]
Staging: rtl8188eu: Add space around operator
Add space around & operator for improving the code
readability.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200308192152.26403-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Sun, 8 Mar 2020 22:54:00 +0000 (23:54 +0100)]
staging: hp: remove commented out code
Remove unused code.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200308225400.17267-1-lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 16:51:38 +0000 (22:21 +0530)]
staging: exfat: alignment should match open parenthesis
Align code to match open parenthesis.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309165138.5313-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Mon, 9 Mar 2020 16:58:01 +0000 (17:58 +0100)]
staging: exfat: exfat_super.c: remove commented out function
Remove function ffsSetAttr() which is unused.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200309165801.4827-1-lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shreeya Patel [Sun, 8 Mar 2020 20:17:03 +0000 (01:47 +0530)]
Staging: rtl8723bs: Remove comparison to true
Remove comparison to "true" from if statement to
maintain the kernel coding style.
Reported by checkpatch.pl
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Link: https://lore.kernel.org/r/20200308201703.31709-1-shreeya.patel23498@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Sun, 8 Mar 2020 12:38:34 +0000 (18:08 +0530)]
staging: ks7010: remove line over 80 characters
Remove line over 80 characters.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200308123834.3377-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 16:55:28 +0000 (22:25 +0530)]
staging: wfx: remove blank line
Blank line is not necessary before a close brace '}', remove it.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20200309165528.5721-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 16:45:15 +0000 (22:15 +0530)]
staging: wfx: alignment should match open parenthesis
Align code to open parenthesis.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309164515.4880-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Fri, 6 Mar 2020 13:24:13 +0000 (14:24 +0100)]
staging: greybus: Fix the irq API abuse
Nothing outside of low level architecture code is supposed to look up
interrupt descriptors and fiddle with them.
Replace the open coded abuse by calling generic_handle_irq().
This still does not explain why and in which context this connection
magic is injecting interrupts in the first place and why this is correct
and safe, but at least the API abuse is gone.
Fixes:
036aad9d0224 ("greybus: gpio: add interrupt handling support")
Fixes:
2611ebef8322 ("greybus: gpio: don't call irq-flow handler directly")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/87o8t9boqq.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lourdes Pedrajas [Mon, 9 Mar 2020 17:06:43 +0000 (18:06 +0100)]
staging: greybus: i2c.c: remove commented out function
Remove function gb_i2c_smbus_xfer() which is unused.
Signed-off-by: Lourdes Pedrajas <lu@pplo.net>
Link: https://lore.kernel.org/r/20200309170643.4947-1-lu@pplo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 16:27:28 +0000 (21:57 +0530)]
staging: qlge: qlge.h: remove excess newlines
Blank lines aren't necessary after an open brace '{'.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309162728.4342-4-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 16:27:27 +0000 (21:57 +0530)]
staging: qlge: qlge.h: add spaces around operators
Add spaces around operators cleanup reported by checkpatch.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309162728.4342-3-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 16:27:26 +0000 (21:57 +0530)]
staging: qlge: qlge.h: remove spaces before tabs and align code
Remove white spaces before tabs and align code properly for readability.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309162728.4342-2-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 09:40:36 +0000 (15:10 +0530)]
staging: qlge: remove blank line
Remove unnecessary multiple blank lines.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://lore.kernel.org/r/20200309094036.3957-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 17:09:27 +0000 (22:39 +0530)]
staging: vt6655: alignment should match open parenthesis
Align code to the open parenthesis to fix the alignment issue.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Link: https://lore.kernel.org/r/20200309170927.6171-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Payal Kshirsagar [Mon, 9 Mar 2020 07:34:24 +0000 (13:04 +0530)]
staging: vt6656: remove blank line
To avoid style issues, remove multiple blank lines.
Signed-off-by: Payal Kshirsagar <payalskshirsagar1234@gmail.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/20200309073424.4920-1-payalskshirsagar1234@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Mon, 2 Mar 2020 16:22:36 +0000 (16:22 +0000)]
staging: wilc1000: use flexible-array member instead of zero-length array
Use flexible-array member introduced in C99 instead of zero-length
array. Most of zero-length array was already taken care in previous
patch [1]. Now modified few more cases which were not handled earlier.
[1]. https://patchwork.kernel.org/patch/
11394197/
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200302162226.4196-4-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Mon, 2 Mar 2020 16:22:35 +0000 (16:22 +0000)]
staging: wilc1000: remove unnecessary always true 'if' conditions
Remove the unnecessary always true 'if' conditions and simiplifed the
logic as suggested in [1].
[1]. https://lore.kernel.org/linux-wireless/
20200302092346.GA24308@kadam/
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200302162226.4196-3-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ajay Singh [Mon, 2 Mar 2020 16:22:35 +0000 (16:22 +0000)]
staging: wilc1000: use correct data for memcpy in wilc_hif_pack_sta_param()
Use correct data for memcpy in wilc_hif_pack_sta_param(). Its
reported by Smatch static code analyser tool as discussed in [1].
[1]. https://lore.kernel.org/linux-wireless/
20200302092346.GA24308@kadam/
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200302162226.4196-2-ajay.kathat@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oscar Carter [Sun, 1 Mar 2020 13:50:28 +0000 (14:50 +0100)]
staging: vt6656: Remove unnecessary local variables initialization
Don't initialize variables that are then set a few lines later.
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Reviewed-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Link: https://lore.kernel.org/r/20200301135028.11753-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Tue, 3 Mar 2020 20:41:05 +0000 (20:41 +0000)]
staging: vt6656: Move vnt_rx_data to usbpipe.c
vnt_rx_data is a USB function and vnt_submit_rx_urb_complete is
the only caller therefore removing dpc.c/h files and becoming
static.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/d3937276-5a47-7184-e263-84d9c9cb5c7a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 2 Mar 2020 21:22:49 +0000 (21:22 +0000)]
staging: vt6656: Delete int.c/h file and move functions to usbpipe
Move functions vnt_int_process_data and vnt_int_report_rate to
usbpipe.c and vnt_interrupt_data to usbpipe.h
These form part of the USB structure.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/bc21d3d7-81be-4ec1-030e-4e7a45f98238@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 2 Mar 2020 21:16:23 +0000 (21:16 +0000)]
staging: vt6656: Remove function vnt_int_process_data.
call vnt_start_interrupt_urb directly from vnt_start.
Move debug message to vnt_start_interrupt_urb.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/dff3a1d0-4d24-d9ea-2a15-c81fd544bc79@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Mon, 2 Mar 2020 21:13:28 +0000 (21:13 +0000)]
staging: vt6656: vnt_int_start_interrupt remove spin lock.
This formed part of the legacy driver and potentially multi
users.
The driver now has only one user mac80211 remove this lock.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/871a78d4-6d3e-f34b-d0ae-6123803c6faf@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sat, 29 Feb 2020 20:37:40 +0000 (20:37 +0000)]
staging: vt6656: vnt_vt3184_init remove stack copy to array.
use u8 pointer addr directly and remove stack array.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/49f34764-c90c-8c5f-b4f2-a3668b13e519@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sat, 29 Feb 2020 20:33:54 +0000 (20:33 +0000)]
staging: vt6656: use vnt_vt3184_agc array directly
vnt_vt3184_agc is always the same regardless of rf type
so use the array directly removing from stack buffer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/4b455ee4-7ac7-e1ff-4a10-2d99f2e30714@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Sat, 29 Feb 2020 19:29:55 +0000 (19:29 +0000)]
staging: vt6656: Remove STATUS enums from TX path
Returning standard error code or status variable.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/21bf299b-63e0-9f65-c7db-6e0b72e0f1d8@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Malcolm Priestley [Thu, 27 Feb 2020 21:06:17 +0000 (21:06 +0000)]
staging: vt6656: Use mac80211 duration for tx headers
mac80211 already provides the correct duration simply
copy it to the tx headers removing the need for driver
to find it with vnt_get_duration_le.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Link: https://lore.kernel.org/r/0cdde611-119b-b223-e8c8-b59fb497a7b9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Mon, 24 Feb 2020 10:33:25 +0000 (13:33 +0300)]
staging: kpc2000: prevent underflow in cpld_reconfigure()
This function should not allow negative values of "wr_val". If
negatives are allowed then capping the upper bound at 7 is
meaningless. Let's make it unsigned.
Fixes:
7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200224103325.hrxdnaeqsthplu42@kili.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuhiro Kohada [Mon, 2 Mar 2020 09:57:16 +0000 (18:57 +0900)]
staging: exfat: remove redundant if statements
If statement does not affect results when updating directory entry in
ffsMapCluster().
Signed-off-by: Tetsuhiro Kohada <Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp>
Link: https://lore.kernel.org/r/20200302095716.64155-2-Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuhiro Kohada [Mon, 2 Mar 2020 09:57:15 +0000 (18:57 +0900)]
staging: exfat: clean up d_entry rebuilding.
Clean up d_entry rebuilding in exfat_rename_file() and move_file().
-Replace memcpy of d_entry with structure copy.
-Change to use the value already stored in fid.
Signed-off-by: Tetsuhiro Kohada <Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp>
Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Link: https://lore.kernel.org/r/20200302095716.64155-1-Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuhiro Kohada [Fri, 28 Feb 2020 08:40:36 +0000 (17:40 +0900)]
staging: exfat: remove 'file creation modes'
The mode parameter in ffsCreateFile() and create_file() is redundant.
Remove it and definition.
Signed-off-by: Tetsuhiro Kohada <Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp>
Link: https://lore.kernel.org/r/20200228084037.15123-1-Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log