drm/nouveau/disp/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dma/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ltc/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ibus/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/i2c/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gpio/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fuse/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bus/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bar/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/imem/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/devinit/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/tmr/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pci/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/top/gp104: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: recognise GP104 chipset

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/sw/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/dma/gp100: initial implementation

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot/gm200: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ltc/gp100: initial support

Due to the GPU preventing us from touching NV_PLTCG_LTCS_LTSS_CBC_BASE,
we cannot provide CBC/ZBC support without signed PMU firmware to handle
the task for us...

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ibus/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/i2c/gm204: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gpio/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fuse/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bus/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bar/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mmu/gp100: initial support

GP100 still supports the previous generations' page table layout, which
we will temporarily make use of here.

Proper support for the new MMU layout requires some rework to the common
MMU code, which is in progress.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/imem/gp100: initial implementation

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/devinit/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/rammap: 32-bit bios pointers

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/pll: initial support for BIT 'C' version 2

Just enough to get at the PLL table.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/dp: initial support for 4.2

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/tmr/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/pci/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/top/gp100: initial support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: recognise GP100 chipset

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: increase maximum nvenc instances to 3

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/core: increase maximum ce instances to 6

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fb/gf100-: allow selection of an alternate big page size

GFxxx/GM1xx support the selection of 64/128KiB big pages globally.

GM2xx supports the same, as well as another mode where the page size
can be selected per-instance.

We default to 128KiB pages (With per-instance for GM200, but the current
code selects 128KiB there already) as the MMU code isn't currently able
to handle otherwise.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau: prevent oops if no mmu subdev present

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp/g94: implement workaround for dvi issue on fx380

Fixes the second DVI output on Quadro FX380.

Thanks to NVIDIA for providing the details on the full workaround.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios: pointers beyond end of first image need special handling

Makes common the code that was previously used by the PMU table parsing,
as it appears other tables need this too.

Not much of an idea what this is all about...

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/bios: guard against out-of-bounds accesses to image

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo/gk104-: translate engidx into human-readable name in debug output

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/disp/nv50-: fix lookup of udisp table under certain circumstances

Some VBIOS have separate tables for each link of a given output path,
which means we have to specify the specific link we're using instead
of all possible links.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ltc/gm107-: decode interrupt status to human-readable strings

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr/gk20a: delete unneeded second newline

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gf100: Read secondary bypass postdiv when required

v2: fix typo it's -> its

Signed-off-by: Roy Spliet <nouveau@spliet.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gf100-: Clean up PLL locking test

Corresponds with GT215. Don't rely on the lock test logic being
unconditionally enabled, and disable test logic when done (presumably
to save power).

v2: Remove warning, nvkm_msec already warns on time-out

Signed-off-by: Roy Spliet <nouveau@spliet.org>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot: lazy-load firmware and be more resilient

Defer the loading of firmware files to the chip-specific part of secure
boot. This allows implementations to retry loading firmware if the first
attempt failed ; for the GM200 implementation, this happens when trying
to reset a falcon, typically in reaction to GR init.

Firmware loading may fail for a variety of reasons, such as the
filesystem where they reside not being ready at init time. This new
behavior allows GR to be initialized the next time we try to use it if
the firmware has become available.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot/gm200: make firmware loading re-callable

Make it possible to call gm20x_secboot_prepare_blobs() several times
after either success or failure without re-building already existing
blobs. The function will now try to load firmware files that have
previously failed before returning success.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/gr/gf100: handle secure boot errors

Handle and propagate secure boot errors. Failure to do so results in
Nouveau incorrectly believing init has succeeded and a completely
black display during boot. If we propagate the error, GR init will fail
and the user will at least have a working display.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot: fix kerneldoc for secure boot structures

Some members were documented in the wrong structure.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/hwmon: add in_min and in_max

it is a little help for hardware monitoring tools

Signed-off-by: Karol Herbst <karolherbst@gmail.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/volt: save the voltage range we are able to set

We shouldn't set voltages below the min or above the max voltage the gpu is
able to set, so save the range for future lookups.

Signed-off-by: Karol Herbst <karolherbst@gmail.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gm20b: add glitchless and DFS support

This patch adds support for advanced features supported by the
Noise-Aware PLL of Maxwell. Glitchless switch allows the PL field to be
updated without disabling the PLL first if the SYNC_MODE bit of the CFG
register is set.

More significantly, DFS allows the PLL to monitor the actual input
voltage and to dynamically lower the output frequency accordingly. This
allows the clock to be more tolerant of lower voltages.

These improvements are only supported for Tegra speedos >= 1.

Also add the voltage table that is suitable for GM20B's NAPLL. This
change needs to be done atomically for the right voltages to be used by
the clock driver.

v2. Fix build on non-Tegra platforms

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: rename constructor

Strip the _ prefix off the gk20a clock constructor.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: improve MNP programming

Split the MNP programming function into two functions for the cases
where we allow sliding or not, instead of making it take a parameter for
this. This results in less conditionals in the code and makes it easier
to read.

Also make the MNP programming functions take the PLL parameters as
arguments, and move bits of code to more relevant places (previous
programming tended to be just-in-time, which added more conditionnals in
the code).

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: factorize n_lo computation code

Use a dedicated function instead of always calculating n_lo on the fly.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: parameterize PLL settings

Make functions manipulating PLL settings take them as an argument,
instead of assuming we want to work on the copy in the gk20a_clk
structure. This makes these functions more flexible, which we will need
in GM20B.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: add and use MNP programming functions

Add relevant functions to work with the gk20a_pll structure and use them
where they ought to be instead of directly manipulating registers.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: use nvkm_ functions in slide()

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: reorganize MNP calculation a bit

Move variables declarations to their actual scope of use, and simplify
code a bit.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: setup slide once during init

Slide setup needs to be performed only once, during init. Also
use the proper parameters for different clock speeds.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/clk/gk20a: properly protect macro argument

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/volt/gm20b: add support for vmin parameter

Chips may be characterized for a minimum voltage. Support this extra
parameter and select the appropriate minimum voltage for the detected
GPU speedo.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/volt/gk20a: rename constructor

Strip the _ prefix off the gk20a volt constructor.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/volt/gk20a: constify and name v_scale

Give a name to this constant so we at least get an idea of what it is
for.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/volt/gk20a: make unused public functions static

Nobody else is using these, so make them private.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/tegra: fetch gpu_speedo_id

The GPU speedo ID is required to select the right clk/volt parameters on
GM20B.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot: use nvkm_mc_enable/disable()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/secboot: use nvkm_mc_intr_mask/unmask()

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gk104-: add pmu reset mask

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gf100-: support for masking interrupts

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc/gt215: support for masking interrupts

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: support for temporarily masking interrupts from a specific device

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: s/intr_mask/intr_stat/

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: expose device enable/disable separately, as well as reset

There are cases where subdevs need to perform additonal actions around
the master reset, so we want to expost the operations separately.

This commit also adds a flag to the NV_PMC_ENABLE bitfield definitions
which allow skipping the automatic reset() called from core/subdev.c.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: take nvkm_device as argument to public functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/mc: allow construction of subclassed device

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/top: add function to lookup interrupt mask for a given device

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/top: take nvkm_device as argument to public functions

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Merge tag 'asoc-hdmi-codec-pdata' of git://git./linux/kernel/git/broonie/sound into drm-next

ASoC: Add private data for HDMI CODEC callbacks

Allow the HDMI CODECs to get private data passed in in callbacks.

[airlied:
Add STI/mediatek patches from Arnd for drivers merged later in drm tree.]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* tag 'asoc-hdmi-codec-pdata' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
  ASoC: hdmi-codec: callback function will be called with private data

Merge branch 'for-next' of git.agner.ch/git/linux-drm-fsl-dcu into drm-next

The patchset contains a new helper in drm_fb_cma_helper.c for suspend/
resume when using cma backed framebuffers.

* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: disable vblank events on CRTC disable
  drm/fsl-dcu: implement suspend/resume using atomic helpers
  drm/fsl-dcu: use clk helpers
  drm/fsl-dcu: move layer initialization to plane file
  drm/fsl-dcu: store layer registers in soc_data
  drm/fb_cma_helper: add suspend helper

Back-merge tag 'v4.7-rc5' into drm-next

Linux 4.7-rc5

The fsl-dcu pull needs -rc3 so go to -rc5 for now.

Merge branch 'sti-drm-next-2016-06-30' of git.linaro.org/people/benjamin.gaignard/kernel into drm-next

This pull request include 3 minors fix and one feature evolution
around ASoC hdmi codec support.

* 'sti-drm-next-2016-06-30' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: Add ASoC generic hdmi codec support.
  drm/sti: adjust delay for AWG
  drm: sti: fix clocking issues in crtc
  drm/sti: Use 64-bit timestamps

drm: sti: Add ASoC generic hdmi codec support.

Add the interface needed by audio hdmi-codec driver.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>

ASoC: hdmi-codec: callback function will be called with private data

Current hdmi-codec driver is assuming that it will be registered
from HDMI driver. Because of this assumption, each callback function
has struct device pointer which is parent device (= HDMI).
Then, it can use dev_get_drvdata() to get private data.

OTOH, on some SoC/HDMI case, SoC has VIDEO/SOUND and HDMI IPs.
This case, it needs SoC VIDEO, SoC SOUND and HDMI video, HDMI codec
driver. In DesignWare HDMI IP case, SoC VIDEO (= DRM/KMS) driver tries
to bind DesignWare HDMI video driver, and HDMI codec driver
(= hdmi-codec). This case, above "parent device" of HDMI codec driver
is DRM/KMS driver and its "device" already has private data.

And, from DT and ASoC CPU/Codec/Card binding point of view, HDMI codec
(= hdmi-codec) needs to have "parent device" (= DRM/KMS), otherwise,
it never detect sound card.

Because of these reasons, some driver can't use dev_get_drvdata() to
get private data on hdmi-codec driver. This patch add new void pointer
on hdmi_codec_pdata for private data, and callback function will be
called with it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

drm/sti: adjust delay for AWG

Compensate delay introduced by AWG IP during DE generation

Signed-off-by: Bich Hemon <bich.hemon@st.com>
Reviewed-by: Vincent ABRIOU <vincent.abriou@st.com>

drm: sti: fix clocking issues in crtc

fix and simplify clock management in crtc to avoid unbalanced
call to clk_prepare_enable and clk_disable_unprepare functions
remove unused functions

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>