Mark Langsdorf [Wed, 22 Dec 2021 15:57:34 +0000 (16:57 +0100)]
ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitions
[ Upstream commit
f81bdeaf816142e0729eea0cc84c395ec9673151 ]
ACPICA commit
bc02c76d518135531483dfc276ed28b7ee632ce1
The current ACPI_ACCESS_*_WIDTH defines do not provide a way to
test that size is small enough to not cause an overflow when
applied to a 32-bit integer.
Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT,
ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and
redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines.
This was inititally reported on Linux where a size of 102 in
ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR
initialization code.
Link: https://github.com/acpica/acpica/commit/bc02c76d
Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kyeong Yoo [Tue, 4 Jul 2017 04:22:38 +0000 (16:22 +1200)]
jffs2: GC deadlock reading a page that is used in jffs2_write_begin()
[ Upstream commit
aa39cc675799bc92da153af9a13d6f969c348e82 ]
GC task can deadlock in read_cache_page() because it may attempt
to release a page that is actually allocated by another task in
jffs2_write_begin().
The reason is that in jffs2_write_begin() there is a small window
a cache page is allocated for use but not set Uptodate yet.
This ends up with a deadlock between two tasks:
1) A task (e.g. file copy)
- jffs2_write_begin() locks a cache page
- jffs2_write_end() tries to lock "alloc_sem" from
jffs2_reserve_space() <-- STUCK
2) GC task (jffs2_gcd_mtd3)
- jffs2_garbage_collect_pass() locks "alloc_sem"
- try to lock the same cache page in read_cache_page() <-- STUCK
So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin()
while reading data in a cache page.
Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Wed, 22 Dec 2021 00:17:28 +0000 (01:17 +0100)]
drm/etnaviv: consider completed fence seqno in hang check
[ Upstream commit
cdd156955f946beaa5f3a00d8ccf90e5a197becc ]
Some GPU heavy test programs manage to trigger the hangcheck quite often.
If there are no other GPU users in the system and the test program
exhibits a very regular structure in the commandstreams that are being
submitted, we can end up with two distinct submits managing to trigger
the hangcheck with the FE in a very similar address range. This leads
the hangcheck to believe that the GPU is stuck, while in reality the GPU
is already busy working on a different job. To avoid those spurious
GPU resets, also remember and consider the last completed fence seqno
in the hang check.
Reported-by: Joerg Albert <joerg.albert@iav.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Antony Antony [Wed, 22 Dec 2021 13:11:18 +0000 (14:11 +0100)]
xfrm: rate limit SA mapping change message to user space
[ Upstream commit
4e484b3e969b52effd95c17f7a86f39208b2ccf4 ]
Kernel generates mapping change message, XFRM_MSG_MAPPING,
when a source port chage is detected on a input state with UDP
encapsulation set. Kernel generates a message for each IPsec packet
with new source port. For a high speed flow per packet mapping change
message can be excessive, and can overload the user space listener.
Introduce rate limiting for XFRM_MSG_MAPPING message to the user space.
The rate limiting is configurable via netlink, when adding a new SA or
updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds.
v1->v2 change:
update xfrm_sa_len()
v2->v3 changes:
use u32 insted unsigned long to reduce size of struct xfrm_state
fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com>
accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present
Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Wed, 22 Dec 2021 20:22:01 +0000 (12:22 -0800)]
Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES
[ Upstream commit
cfb4c313be670fd4bd09650216620fa4514cdb93 ]
This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes
of experimental LE simultaneous roles.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Greear [Thu, 3 Sep 2020 19:52:54 +0000 (12:52 -0700)]
ath11k: Fix napi related hang
[ Upstream commit
d943fdad7589653065be0e20aadc6dff37725ed4 ]
Similar to the same bug in ath10k, a napi disable w/out it being enabled
will hang forever. I believe I saw this while trying rmmod after driver
had some failure on startup. Fix it by keeping state on whether napi is
enabled or not.
And, remove un-used napi pointer in ath11k driver base struct.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20200903195254.29379-1-greearb@candelatech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Mon, 13 Sep 2021 06:12:52 +0000 (23:12 -0700)]
um: registers: Rename function names to avoid conflicts and build problems
[ Upstream commit
077b7320942b64b0da182aefd83c374462a65535 ]
The function names init_registers() and restore_registers() are used
in several net/ethernet/ and gpu/drm/ drivers for other purposes (not
calls to UML functions), so rename them.
This fixes multiple build errors.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: linux-um@lists.infradead.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luca Coelho [Sun, 19 Dec 2021 11:28:34 +0000 (13:28 +0200)]
iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQ
[ Upstream commit
459fc0f2c6b0f6e280bfa0f230c100c9dfe3a199 ]
In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet. Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.
Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilan Peer [Sun, 19 Dec 2021 10:18:16 +0000 (12:18 +0200)]
iwlwifi: mvm: Fix calculation of frame length
[ Upstream commit
40a0b38d7a7f91a6027287e0df54f5f547e8d27e ]
The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.
Fix the Rx processing to remove the extra bytes on non monitor
cases.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Fri, 10 Dec 2021 09:12:45 +0000 (11:12 +0200)]
iwlwifi: remove module loading failure message
[ Upstream commit
6518f83ffa51131daaf439b66094f684da3fb0ae ]
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.
Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Fri, 10 Dec 2021 09:12:42 +0000 (11:12 +0200)]
iwlwifi: fix leaks/bad data after failed firmware load
[ Upstream commit
ab07506b0454bea606095951e19e72c282bfbb42 ]
If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.
Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Changcheng Deng [Thu, 25 Nov 2021 01:43:11 +0000 (01:43 +0000)]
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
[ Upstream commit
92c550f9ffd2884bb5def52b5c0485a35e452784 ]
do_div() does a 64-by-32 division. Here the divisor is an unsigned long
which on some platforms is 64 bit wide. So use div64_ul instead of do_div
to avoid a possible truncation.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211125014311.45942-1-deng.changcheng@zte.com.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
Po-Hao Huang [Fri, 17 Dec 2021 01:27:08 +0000 (09:27 +0800)]
rtw88: 8822c: update rx settings to prevent potential hw deadlock
[ Upstream commit
c1afb26727d9e507d3e17a9890e7aaf7fc85cd55 ]
These settings enables mac to detect and recover when rx fifo
circuit deadlock occurs. Previous version missed this, so we fix it.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211217012708.8623-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zekun Shen [Thu, 28 Oct 2021 22:21:42 +0000 (18:21 -0400)]
ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_stream
[ Upstream commit
6ce708f54cc8d73beca213cec66ede5ce100a781 ]
Large pkt_len can lead to out-out-bound memcpy. Current
ath9k_hif_usb_rx_stream allows combining the content of two urb
inputs to one pkt. The first input can indicate the size of the
pkt. Any remaining size is saved in hif_dev->rx_remain_len.
While processing the next input, memcpy is used with rx_remain_len.
4-byte pkt_len can go up to 0xffff, while a single input is 0x4000
maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for
pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE.
BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
Read of size 46393 at addr
ffff888018798000 by task kworker/0:1/23
CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
__kasan_report.cold+0x37/0x7c
? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
kasan_report+0xe/0x20
check_memory_region+0x15a/0x1d0
memcpy+0x20/0x50
ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc]
? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __usb_unanchor_urb+0x12f/0x210
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU
emulation, I found the KASAN report. The bug is triggerable whenever
pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes
to test the driver works when applying the patch.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Wed, 15 Dec 2021 12:01:06 +0000 (20:01 +0800)]
usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0
[ Upstream commit
00558586382891540c59c9febc671062425a6e47 ]
When a new USB device gets plugged to nested hubs, the affected hub,
which connects to usb 2-1.4-port2, doesn't report there's any change,
hence the nested hubs go back to runtime suspend like nothing happened:
[ 281.032951] usb usb2: usb wakeup-resume
[ 281.032959] usb usb2: usb auto-resume
[ 281.032974] hub 2-0:1.0: hub_resume
[ 281.033011] usb usb2-port1: status 0263 change 0000
[ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.049797] usb 2-1: usb wakeup-resume
[ 281.069800] usb 2-1: Waited 0ms for CONNECT
[ 281.069810] usb 2-1: finish resume
[ 281.070026] hub 2-1:1.0: hub_resume
[ 281.070250] usb 2-1-port4: status 0203 change 0000
[ 281.070272] usb usb2-port1: resume, status 0
[ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.089813] usb 2-1.4: usb wakeup-resume
[ 281.109792] usb 2-1.4: Waited 0ms for CONNECT
[ 281.109801] usb 2-1.4: finish resume
[ 281.109991] hub 2-1.4:1.0: hub_resume
[ 281.110147] usb 2-1.4-port2: status 0263 change 0000
[ 281.110234] usb 2-1-port4: resume, status 0
[ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.110426] hub 2-1.4:1.0: hub_suspend
[ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.130998] hub 2-1:1.0: hub_suspend
[ 281.137788] usb 2-1: usb auto-suspend, wakeup 1
[ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.177828] usb 2-1: usb wakeup-resume
[ 281.197839] usb 2-1: Waited 0ms for CONNECT
[ 281.197850] usb 2-1: finish resume
[ 281.197984] hub 2-1:1.0: hub_resume
[ 281.198203] usb 2-1-port4: status 0203 change 0000
[ 281.198228] usb usb2-port1: resume, status 0
[ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000
[ 281.217835] usb 2-1.4: usb wakeup-resume
[ 281.237834] usb 2-1.4: Waited 0ms for CONNECT
[ 281.237845] usb 2-1.4: finish resume
[ 281.237990] hub 2-1.4:1.0: hub_resume
[ 281.238067] usb 2-1.4-port2: status 0263 change 0000
[ 281.238148] usb 2-1-port4: resume, status 0
[ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s
[ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000
[ 281.238385] hub 2-1.4:1.0: hub_suspend
[ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1
[ 281.258076] hub 2-1:1.0: hub_suspend
[ 281.265744] usb 2-1: usb auto-suspend, wakeup 1
[ 281.285976] hub 2-0:1.0: hub_suspend
[ 281.285988] usb usb2: bus auto-suspend, wakeup 1
USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If
the link is in a non-U0 state, then the device must transition the link
to U0 prior to sending the remote wake message", but the hub only
transits the link to U0 after signaling remote wakeup.
So be more forgiving and use a 20ms delay to let the link transit to U0
for remote wakeup.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Thu, 16 Dec 2021 19:32:15 +0000 (20:32 +0100)]
cpufreq: Fix initialization of min and max frequency QoS requests
[ Upstream commit
521223d8b3ec078f670c7c35a1a04b1b2af07966 ]
The min and max frequency QoS requests in the cpufreq core are
initialized to whatever the current min and max frequency values are
at the init time, but if any of these values change later (for
example, cpuinfo.max_freq is updated by the driver), these initial
request values will be limiting the CPU frequency unnecessarily
unless they are changed by user space via sysfs.
To address this, initialize min_freq_req and max_freq_req to
FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE,
respectively, so they don't really limit anything until user
space updates them.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafael J. Wysocki [Fri, 10 Dec 2021 16:10:13 +0000 (17:10 +0100)]
PM: runtime: Add safety net to supplier device release
[ Upstream commit
d1579e61192e0e686faa4208500ef4c3b529b16c ]
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Tue, 7 Dec 2021 13:28:29 +0000 (14:28 +0100)]
arm64: tegra: Adjust length of CCPLEX cluster MMIO region
[ Upstream commit
2b14cbd643feea5fc17c6e8bead4e71088c69acd ]
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Biwen Li [Tue, 14 Dec 2021 09:32:38 +0000 (03:32 -0600)]
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
[ Upstream commit
cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ]
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Moore [Mon, 13 Dec 2021 20:45:20 +0000 (15:45 -0500)]
audit: ensure userspace is penalized the same as the kernel when under pressure
[ Upstream commit
8f110f530635af44fff1f4ee100ecef0bac62510 ]
Due to the audit control mutex necessary for serializing audit
userspace messages we haven't been able to block/penalize userspace
processes that attempt to send audit records while the system is
under audit pressure. The result is that privileged userspace
applications have a priority boost with respect to audit as they are
not bound by the same audit queue throttling as the other tasks on
the system.
This patch attempts to restore some balance to the system when under
audit pressure by blocking these privileged userspace tasks after
they have finished their audit processing, and dropped the audit
control mutex, but before they return to userspace.
Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ulf Hansson [Wed, 10 Nov 2021 17:17:09 +0000 (18:17 +0100)]
mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIO
[ Upstream commit
8c3e5b74b9e2146f564905e50ca716591c76d4f1 ]
The mmc core takes a specific path to support initializing of a
non-standard SDIO card. This is triggered by looking for the card-quirk,
MMC_QUIRK_NONSTD_SDIO.
In mmc_sdio_init_card() this gets rather messy, as it causes the code to
bail out earlier, compared to the usual path. This leads to that the OCR
doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has
been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by
assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops.
To make the behaviour consistent, let's instead rely on the core to save
the OCR in card->ocr during initialization.
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhou Qingyang [Fri, 3 Dec 2021 15:40:30 +0000 (16:40 +0100)]
media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()
[ Upstream commit
3af86b046933ba513d08399dba0d4d8b50d607d0 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. saa7146_vv_release() will be called on
failure of saa7146_register_device(). There is a dereference of
dev->vv_data in saa7146_vv_release(), which could lead to a NULL
pointer dereference on failure of saa7146_vv_init().
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings,
and our static analyzer no longer warns about this code.
Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Young [Tue, 30 Nov 2021 22:58:19 +0000 (23:58 +0100)]
media: igorplugusb: receiver overflow should be reported
[ Upstream commit
8fede658e7ddb605bbd68ed38067ddb0af033db4 ]
Without this, some IR will be missing mid-stream and we might decode
something which never really occurred.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alistair Francis [Wed, 8 Dec 2021 12:40:43 +0000 (22:40 +1000)]
HID: quirks: Allow inverting the absolute X/Y values
[ Upstream commit
fd8d135b2c5e88662f2729e034913f183455a667 ]
Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Tue, 30 Nov 2021 10:08:06 +0000 (11:08 +0100)]
bpf: Do not WARN in bpf_warn_invalid_xdp_action()
[ Upstream commit
2cbad989033bff0256675c38f96f5faab852af4b ]
The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.
The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.
Replace the WARN_ONCE with a less intrusive pr_warn_once().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suresh Kumar [Mon, 13 Dec 2021 05:47:09 +0000 (11:17 +0530)]
net: bonding: debug: avoid printing debug logs when bond is not notifying peers
[ Upstream commit
fee32de284ac277ba434a2d59f8ce46528ff3946 ]
Currently "bond_should_notify_peers: slave ..." messages are printed whenever
"bond_should_notify_peers" function is called.
+++
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6
Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
...
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6
Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25
+++
This is confusing and can also clutter up debug logs.
Print logs only when the peer notification happens.
Signed-off-by: Suresh Kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Borislav Petkov [Tue, 2 Nov 2021 10:14:48 +0000 (11:14 +0100)]
x86/mce: Mark mce_read_aux() noinstr
[ Upstream commit
db6c996d6ce45dfb44891f0824a65ecec216f47a ]
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-10-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Borislav Petkov [Mon, 1 Nov 2021 15:43:33 +0000 (16:43 +0100)]
x86/mce: Mark mce_end() noinstr
[ Upstream commit
b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ]
It is called by the #MC handler which is noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-9-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Borislav Petkov [Mon, 1 Nov 2021 12:39:35 +0000 (13:39 +0100)]
x86/mce: Mark mce_panic() noinstr
[ Upstream commit
3c7ce80a818fa7950be123cac80cd078e5ac1013 ]
And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Borislav Petkov [Wed, 13 Oct 2021 07:07:19 +0000 (09:07 +0200)]
x86/mce: Allow instrumentation during task work queueing
[ Upstream commit
4fbce464db81a42f9a57ee242d6150ec7f996415 ]
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xdb1: call to queue_task_work() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-6-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baochen Qiang [Thu, 9 Dec 2021 01:19:49 +0000 (09:19 +0800)]
ath11k: Avoid false DEADLOCK warning reported by lockdep
[ Upstream commit
767c94caf0efad136157110787fe221b74cb5c8a ]
With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports
below warning:
[ 166.059415] ============================================
[ 166.059416] WARNING: possible recursive locking detected
[ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O
[ 166.059420] --------------------------------------------
[ 166.059421] kworker/0:2/116 is trying to acquire lock:
[ 166.059423]
ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059440]
but task is already holding lock:
[ 166.059442]
ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059491]
other info that might help us debug this:
[ 166.059492] Possible unsafe locking scenario:
[ 166.059493] CPU0
[ 166.059494] ----
[ 166.059495] lock(&srng->lock);
[ 166.059498] lock(&srng->lock);
[ 166.059500]
*** DEADLOCK ***
[ 166.059501] May be due to missing lock nesting notation
[ 166.059502] 3 locks held by kworker/0:2/116:
[ 166.059504] #0:
ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059511] #1:
ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660
[ 166.059517] #2:
ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k]
[ 166.059532]
stack backtrace:
[ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10
[ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019
[ 166.059539] Workqueue: events free_obj_work
[ 166.059543] Call Trace:
[ 166.059545] <IRQ>
[ 166.059547] dump_stack_lvl+0x56/0x7b
[ 166.059552] __lock_acquire+0xb9a/0x1a50
[ 166.059556] lock_acquire+0x1e2/0x330
[ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059571] _raw_spin_lock_bh+0x33/0x70
[ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k]
[ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k]
[ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k]
[ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k]
[ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k]
[ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci]
[ 166.059659] __napi_poll+0x28/0x230
[ 166.059664] net_rx_action+0x285/0x310
[ 166.059668] __do_softirq+0xe6/0x4d2
[ 166.059672] irq_exit_rcu+0xd2/0xf0
[ 166.059675] common_interrupt+0xa5/0xc0
[ 166.059678] </IRQ>
[ 166.059679] <TASK>
[ 166.059680] asm_common_interrupt+0x1e/0x40
[ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70
[ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a
[ 166.059689] RSP: 0018:
ffff9d2400a5fca0 EFLAGS:
00000206
[ 166.059692] RAX:
0000000000000002 RBX:
0000000000000200 RCX:
0000000000000006
[ 166.059694] RDX:
0000000000000000 RSI:
ffffffffa404879b RDI:
0000000000000001
[ 166.059696] RBP:
ffff9905c0053000 R08:
0000000000000001 R09:
0000000000000001
[ 166.059698] R10:
ffff9d2400a5fc50 R11:
0000000000000001 R12:
ffffe186c41e2840
[ 166.059700] R13:
0000000000000001 R14:
ffff9905c78a1c68 R15:
0000000000000001
[ 166.059704] free_debug_processing+0x257/0x3d0
[ 166.059708] ? free_obj_work+0x1f5/0x250
[ 166.059712] __slab_free+0x374/0x5a0
[ 166.059718] ? kmem_cache_free+0x2e1/0x370
[ 166.059721] ? free_obj_work+0x1f5/0x250
[ 166.059724] kmem_cache_free+0x2e1/0x370
[ 166.059727] free_obj_work+0x1f5/0x250
[ 166.059731] process_one_work+0x28b/0x660
[ 166.059735] ? process_one_work+0x660/0x660
[ 166.059738] worker_thread+0x37/0x390
[ 166.059741] ? process_one_work+0x660/0x660
[ 166.059743] kthread+0x176/0x1a0
[ 166.059746] ? set_kthread_struct+0x40/0x40
[ 166.059749] ret_from_fork+0x22/0x30
[ 166.059754] </TASK>
Since these two lockes are both initialized in ath11k_hal_srng_setup,
they are assigned with the same key. As a result lockdep suspects that
the task is trying to acquire the same lock (due to same key) while
already holding it, and thus reports the DEADLOCK warning. However as
they are different spinlock instances, the warning is false positive.
On the other hand, even no dead lock indeed, this is a major issue for
upstream regression testing as it disables lockdep functionality.
Fix it by assigning separate lock class key for each srng->lock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Tue, 30 Nov 2021 12:25:46 +0000 (13:25 +0100)]
selftests/ftrace: make kprobe profile testcase description unique
[ Upstream commit
e5992f373c6eed6d09e5858e9623df1259b3ce30 ]
Commit
32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Iwona Winiarska [Sat, 4 Dec 2021 17:10:26 +0000 (18:10 +0100)]
gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlock
[ Upstream commit
61a7904b6ace99b1bde0d0e867fa3097f5c8cee2 ]
The gpio-aspeed driver implements an irq_chip which need to be invoked
from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is
no longer legal to invoke it while interrupts are disabled.
This also causes lockdep to complain about:
[ 0.649797] [ BUG: Invalid wait context ]
because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock
(raw_spinlock_t).
Let's use of raw_spinlock_t instead of spinlock_t.
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King (Oracle) [Wed, 8 Dec 2021 11:36:30 +0000 (11:36 +0000)]
net: phy: prefer 1000baseT over 1000baseKX
[ Upstream commit
f20f94f7f52c4685c81754f489ffcc72186e8bdb ]
The PHY settings table is supposed to be sorted by descending match
priority - in other words, earlier entries are preferred over later
entries.
The order of 1000baseKX/Full and 1000baseT/Full is such that we
prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is
a lot rarer than 1000baseT/Full, and thus is much less likely to
be preferred.
This causes phylink problems - it means a fixed link specifying a
speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full
rather than 1000baseT/Full as would be expected - and since we offer
userspace a software emulation of a conventional copper PHY, we want
to offer copper modes in preference to anything else. However, we do
still want to allow the rarer modes as well.
Hence, let's reorder these two modes to prefer copper.
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Antoine Tenart [Tue, 7 Dec 2021 14:57:24 +0000 (15:57 +0100)]
net-sysfs: update the queue counts in the unregistration path
[ Upstream commit
d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ]
When updating Rx and Tx queue kobjects, the queue count should always be
updated to match the queue kobjects count. This was not done in the net
device unregistration path, fix it. Tracking all queue count updates
will allow in a following up patch to detect illegal updates.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Gottschall [Wed, 5 May 2021 08:58:06 +0000 (15:58 +0700)]
ath10k: Fix tx hanging
[ Upstream commit
e8a91863eba3966a447d2daa1526082d52b5db2a ]
While running stress tests in roaming scenarios (switching ap's every 5
seconds, we discovered a issue which leads to tx hangings of exactly 5
seconds while or after scanning for new accesspoints. We found out that
this hanging is triggered by ath10k_mac_wait_tx_complete since the
empty_tx_wq was not wake when the num_tx_pending counter reaches zero.
To fix this, we simply move the wake_up call to htt_tx_dec_pending,
since this call was missed on several locations within the ath10k code.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Gong [Tue, 7 Dec 2021 15:23:36 +0000 (17:23 +0200)]
ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_work
[ Upstream commit
ed05c7cf1286d7e31e7623bce55ff135723591bf ]
When enable debug config, it print below warning while shut down wlan
interface shuh as run "ifconfig wlan0 down".
The reason is because ar->regd_update_work is ran once, and it is will
call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which
is running in workqueue of ieee80211_local queued by ieee80211_queue_work().
Another thread from "ifconfig wlan0 down" will also accuqire the lock
by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and
then it call ieee80211_stop_device() to flush_workqueue(local->workqueue),
this will wait the workqueue of ieee80211_local finished. Then deadlock
will happen easily if the two thread run meanwhile.
Below warning disappeared after this change.
[ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0)
[ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan
[ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0
[ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0
[ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0
[ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0)
[ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0
[ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16
[ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1)
[ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20
[ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error
[ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0
[ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0
[ 914.117583] ======================================================
[ 914.117592] WARNING: possible circular locking dependency detected
[ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE
[ 914.117611] ------------------------------------------------------
[ 914.117618] ifconfig/2805 is trying to acquire lock:
[ 914.117628]
ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470
[ 914.117674]
but task is already holding lock:
[ 914.117682]
ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.117872]
which lock already depends on the new lock.
[ 914.117880]
the existing dependency chain (in reverse order) is:
[ 914.117888]
-> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}:
[ 914.117910] __mutex_lock+0xa0/0x9c0
[ 914.117930] mutex_lock_nested+0x1b/0x20
[ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211]
[ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211]
[ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211]
[ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211]
[ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k]
[ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k]
[ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k]
[ 914.118656] process_one_work+0x228/0x670
[ 914.118669] worker_thread+0x4d/0x440
[ 914.118680] kthread+0x16d/0x1b0
[ 914.118697] ret_from_fork+0x22/0x30
[ 914.118714]
-> #2 (rtnl_mutex){+.+.}-{4:4}:
[ 914.118736] __mutex_lock+0xa0/0x9c0
[ 914.118751] mutex_lock_nested+0x1b/0x20
[ 914.118767] rtnl_lock+0x17/0x20
[ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k]
[ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k]
[ 914.118897] process_one_work+0x228/0x670
[ 914.118909] worker_thread+0x4d/0x440
[ 914.118920] kthread+0x16d/0x1b0
[ 914.118934] ret_from_fork+0x22/0x30
[ 914.118948]
-> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}:
[ 914.118972] process_one_work+0x1fa/0x670
[ 914.118984] worker_thread+0x4d/0x440
[ 914.118996] kthread+0x16d/0x1b0
[ 914.119010] ret_from_fork+0x22/0x30
[ 914.119023]
-> #0 ((wq_completion)phy0){+.+.}-{0:0}:
[ 914.119045] __lock_acquire+0x146d/0x1cf0
[ 914.119057] lock_acquire+0x19b/0x360
[ 914.119067] flush_workqueue+0xae/0x470
[ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.119409] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.119557] __dev_close_many+0xb3/0x120
[ 914.119573] __dev_change_flags+0xc3/0x1d0
[ 914.119590] dev_change_flags+0x29/0x70
[ 914.119605] devinet_ioctl+0x653/0x810
[ 914.119620] inet_ioctl+0x193/0x1e0
[ 914.119631] sock_do_ioctl+0x4d/0xf0
[ 914.119649] sock_ioctl+0x262/0x340
[ 914.119665] __x64_sys_ioctl+0x96/0xd0
[ 914.119678] do_syscall_64+0x3d/0xd0
[ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.119709]
other info that might help us debug this:
[ 914.119717] Chain exists of:
(wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx
[ 914.119745] Possible unsafe locking scenario:
[ 914.119752] CPU0 CPU1
[ 914.119758] ---- ----
[ 914.119765] lock(&rdev->wiphy.mtx);
[ 914.119778] lock(rtnl_mutex);
[ 914.119792] lock(&rdev->wiphy.mtx);
[ 914.119807] lock((wq_completion)phy0);
[ 914.119819]
*** DEADLOCK ***
[ 914.119827] 2 locks held by ifconfig/2805:
[ 914.119837] #0:
ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20
[ 914.119872] #1:
ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211]
[ 914.120039]
stack backtrace:
[ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1
[ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011
[ 914.120074] Call Trace:
[ 914.120084] <TASK>
[ 914.120094] dump_stack_lvl+0x73/0xa4
[ 914.120119] dump_stack+0x10/0x12
[ 914.120135] print_circular_bug.isra.44+0x221/0x2e0
[ 914.120165] check_noncircular+0x106/0x150
[ 914.120203] __lock_acquire+0x146d/0x1cf0
[ 914.120215] ? __lock_acquire+0x146d/0x1cf0
[ 914.120245] lock_acquire+0x19b/0x360
[ 914.120259] ? flush_workqueue+0x87/0x470
[ 914.120286] ? lockdep_init_map_type+0x6b/0x250
[ 914.120310] flush_workqueue+0xae/0x470
[ 914.120327] ? flush_workqueue+0x87/0x470
[ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150
[ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211]
[ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211]
[ 914.120906] ieee80211_stop+0x45/0x180 [mac80211]
[ 914.121060] __dev_close_many+0xb3/0x120
[ 914.121081] __dev_change_flags+0xc3/0x1d0
[ 914.121109] dev_change_flags+0x29/0x70
[ 914.121131] devinet_ioctl+0x653/0x810
[ 914.121149] ? __might_fault+0x77/0x80
[ 914.121179] inet_ioctl+0x193/0x1e0
[ 914.121194] ? inet_ioctl+0x193/0x1e0
[ 914.121218] ? __might_fault+0x77/0x80
[ 914.121238] ? _copy_to_user+0x68/0x80
[ 914.121266] sock_do_ioctl+0x4d/0xf0
[ 914.121283] ? inet_stream_connect+0x60/0x60
[ 914.121297] ? sock_do_ioctl+0x4d/0xf0
[ 914.121329] sock_ioctl+0x262/0x340
[ 914.121347] ? sock_ioctl+0x262/0x340
[ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280
[ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50
[ 914.121416] __x64_sys_ioctl+0x96/0xd0
[ 914.121430] ? br_ioctl_call+0x90/0x90
[ 914.121445] ? __x64_sys_ioctl+0x96/0xd0
[ 914.121465] do_syscall_64+0x3d/0xd0
[ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 914.121497] RIP: 0033:0x7f0ed051737b
[ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48
[ 914.121527] RSP: 002b:
00007fff7be38b98 EFLAGS:
00000202 ORIG_RAX:
0000000000000010
[ 914.121544] RAX:
ffffffffffffffda RBX:
00007fff7be38ba0 RCX:
00007f0ed051737b
[ 914.121555] RDX:
00007fff7be38ba0 RSI:
0000000000008914 RDI:
0000000000000004
[ 914.121566] RBP:
00007fff7be38c60 R08:
000000000000000a R09:
0000000000000001
[ 914.121576] R10:
0000000000000000 R11:
0000000000000202 R12:
00000000fffffffe
[ 914.121586] R13:
0000000000000004 R14:
0000000000000000 R15:
0000000000000000
[ 914.121620] </TASK>
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shaul Triebitz [Sat, 4 Dec 2021 11:10:47 +0000 (13:10 +0200)]
iwlwifi: mvm: avoid clearing a just saved session protection id
[ Upstream commit
8e967c137df3b236d2075f9538cb888129425d1a ]
When scheduling a session protection the id is saved but
then it may be cleared when calling iwl_mvm_te_clear_data
(if a previous session protection is currently active).
Fix it by saving the id after calling iwl_mvm_te_clear_data.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Sat, 4 Dec 2021 06:35:45 +0000 (08:35 +0200)]
iwlwifi: mvm: synchronize with FW after multicast commands
[ Upstream commit
db66abeea3aefed481391ecc564fb7b7fb31d742 ]
If userspace installs a lot of multicast groups very quickly, then
we may run out of command queue space as we send the updates in an
asynchronous fashion (due to locking concerns), and the CPU can
create them faster than the firmware can process them. This is true
even when mac80211 has a work struct that gets scheduled.
Fix this by synchronizing with the firmware after sending all those
commands - outside of the iteration we can send a synchronous echo
command that just has the effect of the CPU waiting for the prior
asynchronous commands to finish. This also will cause fewer of the
commands to be sent to the firmware overall, because the work will
only run once when rescheduled multiple times while it's running.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649
Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reported-by: Maximilian Ernestus <maximilian@ernestus.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Sun, 14 Nov 2021 14:07:11 +0000 (16:07 +0200)]
thunderbolt: Runtime PM activate both ends of the device link
[ Upstream commit
f3380cac0c0b3a6f49ab161e2a057c363962f48d ]
If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.
Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Mon, 6 Dec 2021 14:34:19 +0000 (15:34 +0100)]
media: m920x: don't use stack on USB reads
[ Upstream commit
a2ab06d7c4d6bfd0b545a768247a70463e977e27 ]
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhou Qingyang [Tue, 30 Nov 2021 16:25:49 +0000 (17:25 +0100)]
media: saa7146: hexium_orion: Fix a NULL pointer dereference in hexium_attach()
[ Upstream commit
348df8035301dd212e3cc2860efe4c86cb0d3303 ]
In hexium_attach(dev, info), saa7146_vv_init() is called to allocate
a new memory for dev->vv_data. In hexium_detach(), saa7146_vv_release()
will be called and there is a dereference of dev->vv_data in
saa7146_vv_release(), which could lead to a NULL pointer dereference
on failure of saa7146_vv_init() according to the following logic.
Both hexium_attach() and hexium_detach() are callback functions of
the variable 'extension', so there exists a possible call chain directly
from hexium_attach() to hexium_detach():
hexium_attach(dev, info) -- fail to alloc memory to dev->vv_data
| in saa7146_vv_init().
|
|
hexium_detach() -- a dereference of dev->vv_data in saa7146_vv_release()
Fix this bug by adding a check of saa7146_vv_init().
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_VIDEO_HEXIUM_ORION=m show no new warnings,
and our static analyzer no longer warns about this code.
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Söderlund [Thu, 25 Nov 2021 23:02:57 +0000 (00:02 +0100)]
media: rcar-vin: Update format alignment constraints
[ Upstream commit
da6911f330d40cfe115a37249e47643eff555e82 ]
This change fixes two issues with the size constraints for buffers.
- There is no width alignment constraint for RGB formats. Prior to this
change they were treated as YUV and as a result were more restricted
than needed. Add a new check to differentiate between the two.
- The minimum width and height supported is 5x2, not 2x4, this is an
artifact from the driver's soc-camera days. Fix this incorrect
assumption.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
James Hilliard [Sun, 14 Nov 2021 08:52:36 +0000 (09:52 +0100)]
media: uvcvideo: Increase UVC_CTRL_CONTROL_TIMEOUT to 5 seconds.
[ Upstream commit
c8ed7d2f614cd8b315981d116c7a2fb01829500d ]
Some uvc devices appear to require the maximum allowed USB timeout
for GET_CUR/SET_CUR requests.
So lets just bump the UVC control timeout to 5 seconds which is the
same as the usb ctrl get/set defaults:
USB_CTRL_GET_TIMEOUT 5000
USB_CTRL_SET_TIMEOUT 5000
It fixes the following runtime warnings:
Failed to query (GET_CUR) UVC control 11 on unit 2: -110 (exp. 1).
Failed to query (SET_CUR) UVC control 3 on unit 2: -110 (exp. 2).
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Mon, 29 Nov 2021 01:10:46 +0000 (03:10 +0200)]
drm: rcar-du: Fix CRTC timings when CMM is used
[ Upstream commit
f0ce591dc9a97067c6e783a2eaccd22c5476144d ]
When the CMM is enabled, an offset of 25 pixels must be subtracted from
the HDS (horizontal display start) and HDE (horizontal display end)
registers. Fix the timings calculation, and take this into account in
the mode validation.
This fixes a visible horizontal offset in the image with VGA monitors.
HDMI monitors seem to be generally more tolerant to incorrect timings,
but may be affected too.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joerg Roedel [Thu, 2 Dec 2021 15:32:25 +0000 (16:32 +0100)]
x86/mm: Flush global TLB when switching to trampoline page-table
[ Upstream commit
71d5049b053876afbde6c3273250b76935494ab2 ]
Move the switching code into a function so that it can be re-used and
add a global TLB flush. This makes sure that usage of memory which is
not mapped in the trampoline page-table is reliably caught.
Also move the clearing of CR4.PCIDE before the CR3 switch because the
cr4_clear_bits() function will access data not mapped into the
trampoline page-table.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211202153226.22946-4-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiongwei Song [Tue, 16 Nov 2021 13:10:33 +0000 (21:10 +0800)]
floppy: Add max size check for user space request
[ Upstream commit
545a32498c536ee152331cd2e7d2416aa0f20e01 ]
We need to check the max request size that is from user space before
allocating pages. If the request size exceeds the limit, return -EINVAL.
This check can avoid the warning below from page allocator.
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 current_gfp_context include/linux/sched/mm.h:195 [inline]
WARNING: CPU: 3 PID: 16525 at mm/page_alloc.c:5344 __alloc_pages+0x45d/0x500 mm/page_alloc.c:5356
Modules linked in:
CPU: 3 PID: 16525 Comm: syz-executor.3 Not tainted 5.15.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__alloc_pages+0x45d/0x500 mm/page_alloc.c:5344
Code: be c9 00 00 00 48 c7 c7 20 4a 97 89 c6 05 62 32 a7 0b 01 e8 74 9a 42 07 e9 6a ff ff ff 0f 0b e9 a0 fd ff ff 40 80 e5 3f eb 88 <0f> 0b e9 18 ff ff ff 4c 89 ef 44 89 e6 45 31 ed e8 1e 76 ff ff e9
RSP: 0018:
ffffc90023b87850 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
1ffff92004770f0b RCX:
dffffc0000000000
RDX:
0000000000000000 RSI:
0000000000000033 RDI:
0000000000010cc1
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000001
R10:
ffffffff81bb4686 R11:
0000000000000001 R12:
ffffffff902c1960
R13:
0000000000000033 R14:
0000000000000000 R15:
ffff88804cf64a30
FS:
0000000000000000(0000) GS:
ffff88802cd00000(0063) knlGS:
00000000f44b4b40
CS: 0010 DS: 002b ES: 002b CR0:
0000000080050033
CR2:
000000002c921000 CR3:
000000004f507000 CR4:
0000000000150ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
__get_free_pages+0x8/0x40 mm/page_alloc.c:5418
raw_cmd_copyin drivers/block/floppy.c:3113 [inline]
raw_cmd_ioctl drivers/block/floppy.c:3160 [inline]
fd_locked_ioctl+0x12e5/0x2820 drivers/block/floppy.c:3528
fd_ioctl drivers/block/floppy.c:3555 [inline]
fd_compat_ioctl+0x891/0x1b60 drivers/block/floppy.c:3869
compat_blkdev_ioctl+0x3b8/0x810 block/ioctl.c:662
__do_compat_sys_ioctl+0x1c7/0x290 fs/ioctl.c:972
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178
do_fast_syscall_32+0x2f/0x70 arch/x86/entry/common.c:203
entry_SYSENTER_compat_after_hwframe+0x4d/0x5c
Reported-by: syzbot+23a02c7df2cf2bc93fa2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211116131033.27685-1-sxwjean@me.com
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neal Liu [Fri, 26 Nov 2021 10:00:21 +0000 (18:00 +0800)]
usb: uhci: add aspeed ast2600 uhci support
[ Upstream commit
554abfe2eadec97d12c71d4a69da1518478f69eb ]
Enable ast2600 uhci quirks.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20211126100021.2331024-1-neal_liu@aspeedtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kishon Vijay Abraham I [Fri, 26 Nov 2021 08:45:54 +0000 (14:15 +0530)]
arm64: dts: ti: j7200-main: Fix 'dtbs_check' serdes_ln_ctrl node
[ Upstream commit
4d3984906397581dc0ccb6a02bf16b6ff82c9192 ]
Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 22 Nov 2021 17:05:33 +0000 (18:05 +0100)]
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
[ Upstream commit
57d2dbf710d832841872fb15ebb79429cab90fae ]
The GPD win and its sibling the GPD pocket (99% the same electronics in a
different case) use a PCI wifi card. But the ACPI tables on both variants
contain a bug where the SDIO MMC controller for SDIO wifi cards is enabled
despite this. This SDIO MMC controller has a PCI0.SDHB.BRC1 child-device
which _PS3 method sets a GPIO causing the PCI wifi card to turn off.
At the moment there is a pretty ugly kludge in the sdhci-acpi.c code,
just to work around the bug in the DSDT of this single design. This can
be solved cleaner/simply with a quirk overriding the _STA return of the
broken PCI0.SDHB.BRC1 PCI0.SDHB.BRC1 child with a status value of 0,
so that its power_manageable flag gets cleared, avoiding this problem.
Note that even though it is not used, the _STA method for the MMC
controller is deliberately not overridden. If the status of the MMC
controller were forced to 0 it would never get suspended, which would
cause these mini-laptops to not reach S0i3 level when suspended.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 22 Nov 2021 17:05:32 +0000 (18:05 +0100)]
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
[ Upstream commit
ba46e42e925b5d09b4e441f8de3db119cc7df58f ]
Not all ACPI-devices have a HID + UID, allow specifying quirks for
acpi_device_override_status() by path too.
Note this moves the path/HID+UID check to after the CPU + DMI checks
since the path lookup is somewhat costly.
This way this lookup is only done on devices where the other checks
match.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 22 Nov 2021 17:05:31 +0000 (18:05 +0100)]
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
[ Upstream commit
1a68b346a2c9969c05e80a3b99a9ab160b5655c0 ]
Currently, acpi_bus_get_status() calls acpi_device_always_present() to
allow platform quirks to override the _STA return to report that a
device is present (status = ACPI_STA_DEFAULT) independent of the _STA
return.
In some cases it might also be useful to have the opposite functionality
and have a platform quirk which marks a device as not present (status = 0)
to work around ACPI table bugs.
Change acpi_device_always_present() into a more generic
acpi_device_override_status() function to allow this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 22 Nov 2021 17:05:30 +0000 (18:05 +0100)]
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
[ Upstream commit
d431dfb764b145369be820fcdfd50f2159b9bbc2 ]
It turns out that there is a WMI object which controls the PWM2 device
used for the keyboard backlight and that WMI object also provides some
other useful functionality.
The upcoming lenovo-yogabook-wmi driver will offer both backlight
control and the other functionality, so there no longer is a need
to have the lpss-pwm driver binding to PWM2 for backlight control;
and this is now actually undesirable because this will cause both
the WMI code and the lpss-pwm driver to poke at the same PWM
controller.
Drop the always-present quirk for the PWM2 ACPI-device, so that the
lpss-pwm controller will no longer bind to it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mansur Alisha Shaik [Mon, 8 Nov 2021 05:48:51 +0000 (06:48 +0100)]
media: venus: avoid calling core_clk_setrate() concurrently during concurrent video sessions
[ Upstream commit
91f2b7d269e5c885c38c7ffa261f5276bd42f907 ]
In existing implementation, core_clk_setrate() is getting called
concurrently in concurrent video sessions. Before the previous call to
core_clk_setrate returns, new call to core_clk_setrate is invoked from
another video session running concurrently. This results in latest
calculated frequency being set (higher/lower) instead of actual frequency
required for that video session. It also results in stability crashes
mention below. These resources are specific to video core, hence keeping
under core lock would ensure that they are estimated for all running video
sessions and called once for the video core.
Crash logs:
[ 1.900089] WARNING: CPU: 4 PID: 1 at drivers/opp/debugfs.c:33 opp_debug_remove_one+0x2c/0x48
[ 1.908493] Modules linked in:
[ 1.911524] CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.10.67 #35
f8edb8c30cf2dd6838495dd9ef9be47af7f5f60c
[ 1.921036] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT)
[ 1.928673] pstate:
60800009 (nZCv daif -PAN +UAO -TCO BTYPE=--)
[ 1.934608] pc : opp_debug_remove_one+0x2c/0x48
[ 1.939080] lr : opp_debug_remove_one+0x2c/0x48
[ 1.943560] sp :
ffffffc011d7b7f0
[ 1.946836] pmr_save:
000000e0
[ 1.949854] x29:
ffffffc011d7b7f0 x28:
ffffffc010733bbc
[ 1.955104] x27:
ffffffc010733ba8 x26:
ffffff8083cedd00
[ 1.960355] x25:
0000000000000001 x24:
0000000000000000
[ 1.965603] x23:
ffffff8083cc2878 x22:
ffffff8083ceb900
[ 1.970852] x21:
ffffff8083ceb910 x20:
ffffff8083cc2800
[ 1.976101] x19:
ffffff8083ceb900 x18:
00000000ffff0a10
[ 1.981352] x17:
ffffff80837a5620 x16:
00000000000000ec
[ 1.986601] x15:
ffffffc010519ad4 x14:
0000000000000003
[ 1.991849] x13:
0000000000000004 x12:
0000000000000001
[ 1.997100] x11:
c0000000ffffdfff x10:
00000000ffffffff
[ 2.002348] x9 :
d2627c580300dc00 x8 :
d2627c580300dc00
[ 2.007596] x7 :
0720072007200720 x6 :
ffffff80802ecf00
[ 2.012845] x5 :
0000000000190004 x4 :
0000000000000000
[ 2.018094] x3 :
ffffffc011d7b478 x2 :
ffffffc011d7b480
[ 2.023343] x1 :
00000000ffffdfff x0 :
0000000000000017
[ 2.028594] Call trace:
[ 2.031022] opp_debug_remove_one+0x2c/0x48
[ 2.035160] dev_pm_opp_put+0x94/0xb0
[ 2.038780] _opp_remove_all+0x7c/0xc8
[ 2.042486] _opp_remove_all_static+0x54/0x7c
[ 2.046796] dev_pm_opp_remove_table+0x74/0x98
[ 2.051183] devm_pm_opp_of_table_release+0x18/0x24
[ 2.056001] devm_action_release+0x1c/0x28
[ 2.060053] release_nodes+0x23c/0x2b8
[ 2.063760] devres_release_group+0xcc/0xd0
[ 2.067900] component_bind+0xac/0x168
[ 2.071608] component_bind_all+0x98/0x124
[ 2.075664] msm_drm_bind+0x1e8/0x678
[ 2.079287] try_to_bring_up_master+0x60/0x134
[ 2.083674] component_master_add_with_match+0xd8/0x120
[ 2.088834] msm_pdev_probe+0x20c/0x2a0
[ 2.092629] platform_drv_probe+0x9c/0xbc
[ 2.096598] really_probe+0x11c/0x46c
[ 2.100217] driver_probe_device+0x8c/0xf0
[ 2.104270] device_driver_attach+0x54/0x78
[ 2.108407] __driver_attach+0x48/0x148
[ 2.112201] bus_for_each_dev+0x88/0xd4
[ 2.115998] driver_attach+0x2c/0x38
[ 2.119534] bus_add_driver+0x10c/0x200
[ 2.123330] driver_register+0x6c/0x104
[ 2.127122] __platform_driver_register+0x4c/0x58
[ 2.131767] msm_drm_register+0x6c/0x70
[ 2.135560] do_one_initcall+0x64/0x23c
[ 2.139357] do_initcall_level+0xac/0x15c
[ 2.143321] do_initcalls+0x5c/0x9c
[ 2.146778] do_basic_setup+0x2c/0x38
[ 2.150401] kernel_init_freeable+0xf8/0x15c
[ 2.154622] kernel_init+0x1c/0x11c
[ 2.158079] ret_from_fork+0x10/0x30
[ 2.161615] ---[ end trace
a2cc45a0f784b212 ]---
[ 2.166272] Removing OPP:
300000000
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sriram R [Thu, 25 Nov 2021 09:30:14 +0000 (15:00 +0530)]
ath11k: Avoid NULL ptr access during mgmt tx cleanup
[ Upstream commit
a93789ae541c7d5c1c2a4942013adb6bcc5e2848 ]
Currently 'ar' reference is not added in skb_cb during
WMI mgmt tx. Though this is generally not used during tx completion
callbacks, on interface removal the remaining idr cleanup callback
uses the ar ptr from skb_cb from mgmt txmgmt_idr. Hence
fill them during tx call for proper usage.
Also free the skb which is missing currently in these
callbacks.
Crash_info:
[19282.489476] Unable to handle kernel NULL pointer dereference at virtual address
00000000
[19282.489515] pgd =
91eb8000
[19282.496702] [
00000000] *pgd=
00000000
[19282.502524] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[19282.783728] PC is at ath11k_mac_vif_txmgmt_idr_remove+0x28/0xd8 [ath11k]
[19282.789170] LR is at idr_for_each+0xa0/0xc8
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00729-QCAHKSWPL_SILICONZ-3 v2
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1637832614-13831-1-git-send-email-quic_srirrama@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zekun Shen [Fri, 29 Oct 2021 20:19:23 +0000 (16:19 -0400)]
rsi: Fix out-of-bounds read in rsi_read_pkt()
[ Upstream commit
f1cb3476e48b60c450ec3a1d7da0805bffc6e43a ]
rsi_get_* functions rely on an offset variable from usb
input. The size of usb input is RSI_MAX_RX_USB_PKT_SIZE(3000),
while 2-byte offset can be up to 0xFFFF. Thus a large offset
can cause out-of-bounds read.
The patch adds a bound checking condition when rcv_pkt_len is 0,
indicating it's USB. It's unclear whether this is triggerable
from other type of bus. The following check might help in that case.
offset > rcv_pkt_len - FRAME_DESC_SZ
The bug is trigerrable with conpromised/malfunctioning USB devices.
I tested the patch with the crashing input and got no more bug report.
Attached is the KASAN report from fuzzing.
BUG: KASAN: slab-out-of-bounds in rsi_read_pkt+0x42e/0x500 [rsi_91x]
Read of size 2 at addr
ffff888019439fdb by task RX-Thread/227
CPU: 0 PID: 227 Comm: RX-Thread Not tainted 5.6.0 #66
Call Trace:
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
__kasan_report.cold+0x37/0x7c
? rsi_read_pkt+0x42e/0x500 [rsi_91x]
kasan_report+0xe/0x20
rsi_read_pkt+0x42e/0x500 [rsi_91x]
rsi_usb_rx_thread+0x1b1/0x2fc [rsi_usb]
? rsi_probe+0x16a0/0x16a0 [rsi_usb]
? _raw_spin_lock_irqsave+0x7b/0xd0
? _raw_spin_trylock_bh+0x120/0x120
? __wake_up_common+0x10b/0x520
? rsi_probe+0x16a0/0x16a0 [rsi_usb]
kthread+0x2b5/0x3b0
? kthread_create_on_node+0xd0/0xd0
ret_from_fork+0x22/0x40
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxXS4wgu2OsmlVv@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zekun Shen [Fri, 29 Oct 2021 19:49:03 +0000 (15:49 -0400)]
rsi: Fix use-after-free in rsi_rx_done_handler()
[ Upstream commit
b07e3c6ebc0c20c772c0f54042e430acec2945c3 ]
When freeing rx_cb->rx_skb, the pointer is not set to NULL,
a later rsi_rx_done_handler call will try to read the freed
address.
This bug will very likley lead to double free, although
detected early as use-after-free bug.
The bug is triggerable with a compromised/malfunctional usb
device. After applying the patch, the same input no longer
triggers the use-after-free.
Attached is the kasan report from fuzzing.
BUG: KASAN: use-after-free in rsi_rx_done_handler+0x354/0x430 [rsi_usb]
Read of size 4 at addr
ffff8880188e5930 by task modprobe/231
Call Trace:
<IRQ>
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__kasan_report.cold+0x37/0x7c
? dma_direct_unmap_page+0x90/0x110
? rsi_rx_done_handler+0x354/0x430 [rsi_usb]
kasan_report+0xe/0x20
rsi_rx_done_handler+0x354/0x430 [rsi_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __usb_hcd_giveback_urb+0x380/0x380
? apic_timer_interrupt+0xa/0x20
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
? handle_irq_event+0xcd/0x157
? handle_edge_irq+0x1eb/0x7b0
irq_exit+0x114/0x140
do_IRQ+0x91/0x1e0
common_interrupt+0xf/0xf
</IRQ>
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXxQL/vIiYcZUu/j@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zekun Shen [Sun, 31 Oct 2021 02:42:50 +0000 (22:42 -0400)]
mwifiex: Fix skb_over_panic in mwifiex_usb_recv()
[ Upstream commit
04d80663f67ccef893061b49ec8a42ff7045ae84 ]
Currently, with an unknown recv_type, mwifiex_usb_recv
just return -1 without restoring the skb. Next time
mwifiex_usb_rx_complete is invoked with the same skb,
calling skb_put causes skb_over_panic.
The bug is triggerable with a compromised/malfunctioning
usb device. After applying the patch, skb_over_panic
no longer shows up with the same input.
Attached is the panic report from fuzzing.
skbuff: skb_over_panic: text:
000000003bf1b5fa
len:2048 put:4 head:
00000000dd6a115b data:
000000000a9445d8
tail:0x844 end:0x840 dev:<NULL>
kernel BUG at net/core/skbuff.c:109!
invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 PID: 198 Comm: in:imklog Not tainted 5.6.0 #60
RIP: 0010:skb_panic+0x15f/0x161
Call Trace:
<IRQ>
? mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
skb_put.cold+0x24/0x24
mwifiex_usb_rx_complete+0x26b/0xfcd [mwifiex_usb]
__usb_hcd_giveback_urb+0x1e4/0x380
usb_giveback_urb_bh+0x241/0x4f0
? __hrtimer_run_queues+0x316/0x740
? __usb_hcd_giveback_urb+0x380/0x380
tasklet_action_common.isra.0+0x135/0x330
__do_softirq+0x18c/0x634
irq_exit+0x114/0x140
smp_apic_timer_interrupt+0xde/0x380
apic_timer_interrupt+0xf/0x20
</IRQ>
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YX4CqjfRcTa6bVL+@Zekuns-MBP-16.fios-router.home
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Müller [Sun, 21 Nov 2021 14:14:20 +0000 (15:14 +0100)]
crypto: jitter - consider 32 LSB for APT
[ Upstream commit
552d03a223eda3df84526ab2c1f4d82e15eaee7a ]
The APT compares the current time stamp with a pre-set value. The
current code only considered the 4 LSB only. Yet, after reviews by
mathematicians of the user space Jitter RNG version >= 3.1.0, it was
concluded that the APT can be calculated on the 32 LSB of the time
delta. Thi change is applied to the kernel.
This fixes a bug where an AMD EPYC fails this test as its RDTSC value
contains zeros in the LSB. The most appropriate fix would have been to
apply a GCD calculation and divide the time stamp by the GCD. Yet, this
is a significant code change that will be considered for a future
update. Note, tests showed that constantly the GCD always was 32 on
these systems, i.e. the 5 LSB were always zero (thus failing the APT
since it only considered the 4 LSB for its calculation).
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengfeng Ye [Fri, 5 Nov 2021 13:45:07 +0000 (06:45 -0700)]
HSI: core: Fix return freed object in hsi_new_client
[ Upstream commit
a1ee1c08fcd5af03187dcd41dcab12fd5b379555 ]
cl is freed on error of calling device_register, but this
object is return later, which will cause uaf issue. Fix it
by return NULL on error.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 25 Nov 2021 20:30:10 +0000 (21:30 +0100)]
gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use
[ Upstream commit
bdfd6ab8fdccd8b138837efff66f4a1911496378 ]
If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really
should not change the type underneath the current owner.
I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay
Trail tablet, when the Boot OS selection in the BIOS is set to Android.
In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and
the _CRS resources for this device include a GpioInt pointing to a GPIO
already in use by an _AEI handler, with a different type then specified
in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get()
call done by the i2c-core-acpi.c code changing the type breaking the
_AEI handler.
Now this clearly is a bug in the DSDT of this tablet (in Android mode),
but in general calling irq_set_irq_type() on an IRQ which already is
in use seems like a bad idea.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fugang Duan [Thu, 25 Nov 2021 02:03:49 +0000 (10:03 +0800)]
tty: serial: imx: disable UCR4_OREN in .stop_rx() instead of .shutdown()
[ Upstream commit
028e083832b06fdeeb290e1e57dc1f6702c4c215 ]
The UCR4_OREN should be disabled before disabling the uart receiver in
.stop_rx() instead of in the .shutdown().
Otherwise, if we have the overrun error during the receiver disable
process, the overrun interrupt will keep trigging until we disable the
OREN interrupt in the .shutdown(), because the ORE status can only be
cleared when read the rx FIFO or reset the controller. Although the
called time between the receiver disable and OREN disable in .shutdown()
is very short, there is still the risk of endless interrupt during this
short period of time. So here change to disable OREN before the receiver
been disabled in .stop_rx().
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20211125020349.4980-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martyn Welch [Thu, 25 Nov 2021 10:53:02 +0000 (10:53 +0000)]
drm/bridge: megachips: Ensure both bridges are probed before registration
[ Upstream commit
11632d4aa2b3f126790e81a4415d6c23103cf8bb ]
In the configuration used by the b850v3, the STDP2690 is used to read EDID
data whilst it's the STDP4028 which can detect when monitors are connected.
This can result in problems at boot with monitors connected when the
STDP4028 is probed first, a monitor is detected and an attempt is made to
read the EDID data before the STDP2690 has probed:
[ 3.795721] Unable to handle kernel NULL pointer dereference at virtual address
00000018
[ 3.803845] pgd = (ptrval)
[ 3.806581] [
00000018] *pgd=
00000000
[ 3.810180] Internal error: Oops: 5 [#1] SMP ARM
[ 3.814813] Modules linked in:
[ 3.817879] CPU: 0 PID: 64 Comm: kworker/u4:1 Not tainted 5.15.0 #1
[ 3.824161] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 3.830705] Workqueue: events_unbound deferred_probe_work_func
[ 3.836565] PC is at stdp2690_get_edid+0x44/0x19c
[ 3.841286] LR is at ge_b850v3_lvds_get_modes+0x2c/0x5c
[ 3.846526] pc : [<
805eae10>] lr : [<
805eb138>] psr:
80000013
[ 3.852802] sp :
81c359d0 ip :
7dbb550b fp :
81c35a1c
[ 3.858037] r10:
81c73840 r9 :
81c73894 r8 :
816d9800
[ 3.863270] r7 :
00000000 r6 :
81c34000 r5 :
00000000 r4 :
810c35f0
[ 3.869808] r3 :
80e3e294 r2 :
00000080 r1 :
00000cc0 r0 :
81401180
[ 3.876349] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 3.883499] Control:
10c5387d Table:
1000404a DAC:
00000051
[ 3.889254] Register r0 information: slab kmem_cache start
81401180 pointer offset 0
[ 3.897034] Register r1 information: non-paged memory
[ 3.902097] Register r2 information: non-paged memory
[ 3.907160] Register r3 information: non-slab/vmalloc memory
[ 3.912832] Register r4 information: non-slab/vmalloc memory
[ 3.918503] Register r5 information: NULL pointer
[ 3.923217] Register r6 information: non-slab/vmalloc memory
[ 3.928887] Register r7 information: NULL pointer
[ 3.933601] Register r8 information: slab kmalloc-1k start
816d9800 pointer offset 0 size 1024
[ 3.942244] Register r9 information: slab kmalloc-2k start
81c73800 pointer offset 148 size 2048
[ 3.951058] Register r10 information: slab kmalloc-2k start
81c73800 pointer offset 64 size 2048
[ 3.959873] Register r11 information: non-slab/vmalloc memory
[ 3.965632] Register r12 information: non-paged memory
[ 3.970781] Process kworker/u4:1 (pid: 64, stack limit = 0x(ptrval))
[ 3.977148] Stack: (0x81c359d0 to 0x81c36000)
[ 3.981517] 59c0:
80b2b668 80b2b5bc 000002e2 0000034e
[ 3.989712] 59e0:
81c35a8c 816d98e8 81c35a14 7dbb550b 805bfcd0 810c35f0 81c73840 824addc0
[ 3.997906] 5a00:
00001000 816d9800 81c73894 81c73840 81c35a34 81c35a20 805eb138 805eadd8
[ 4.006099] 5a20:
810c35f0 00000045 81c35adc 81c35a38 80594188 805eb118 80d7c788 80dd1848
[ 4.014292] 5a40:
00000000 81c35a50 80dca950 811194d3 80dca7c4 80dca944 80dca91c 816d9800
[ 4.022485] 5a60:
81c34000 81c760a8 816d9800 80c58c98 810c35f0 816d98e8 00001000 00001000
[ 4.030678] 5a80:
00000000 00000000 8017712c 81c60000 00000002 00000001 00000000 00000000
[ 4.038870] 5aa0:
816d9900 816d9900 00000000 7dbb550b 805c700c 00000008 826282c8 826282c8
[ 4.047062] 5ac0:
00001000 81e1ce40 00001000 00000002 81c35bf4 81c35ae0 805d9694 80593fc0
[ 4.055255] 5ae0:
8017a970 80179ad8 00000179 00000000 81c35bcc 81c35b00 80177108 8017a950
[ 4.063447] 5b00:
00000000 81c35b10 81c34000 00000000 81004fd8 81010a38 00000000 00000059
[ 4.071639] 5b20:
816d98d4 81fbb718 00000013 826282c8 8017a940 81c35b40 81134448 00000400
[ 4.079831] 5b40:
00000178 00000000 e063b9c1 00000000 c2000049 00000040 00000000 00000008
[ 4.088024] 5b60:
82628300 82628380 00000000 00000000 81c34000 00000000 81fbb700 82628340
[ 4.096216] 5b80:
826283c0 00001000 00000000 00000010 816d9800 826282c0 801766f8 00000000
[ 4.104408] 5ba0:
00000000 81004fd8 00000049 00000000 00000000 00000001 80dcf940 80178de4
[ 4.112601] 5bc0:
81c35c0c 7dbb550b 80178de4 81fbb700 00000010 00000010 810c35f4 81e1ce40
[ 4.120793] 5be0:
81c40908 0000000c 81c35c64 81c35bf8 805a7f18 805d94a0 81c35c3c 816d9800
[ 4.128985] 5c00:
00000010 81c34000 81c35c2c 81c35c18 8012fce0 805be90c 81c35c3c 81c35c28
[ 4.137178] 5c20:
805be90c 80173210 81fbb600 81fbb6b4 81c35c5c 7dbb550b 81c35c64 81fbb700
[ 4.145370] 5c40:
816d9800 00000010 810c35f4 81e1ce40 81c40908 0000000c 81c35c84 81c35c68
[ 4.153565] 5c60:
805a8c78 805a7ed0 816d9800 81fbb700 00000010 00000000 81c35cac 81c35c88
[ 4.161758] 5c80:
805a8dc4 805a8b68 816d9800 00000000 816d9800 00000000 8179f810 810c42d0
[ 4.169950] 5ca0:
81c35ccc 81c35cb0 805e47b0 805a8d18 824aa240 81e1ea80 81c40908 81126b60
[ 4.178144] 5cc0:
81c35d14 81c35cd0 8060db1c 805e46cc 81c35d14 81c35ce0 80dd90f8 810c4d58
[ 4.186338] 5ce0:
80dd90dc 81fe9740 fffffffe 81fe9740 81e1ea80 00000000 810c4d6c 80c4b95c
[ 4.194531] 5d00:
80dd9a3c 815c6810 81c35d34 81c35d18 8060dc9c 8060d8fc 8246b440 815c6800
[ 4.202724] 5d20:
815c6810 eefd8e00 81c35d44 81c35d38 8060dd80 8060dbec 81c35d6c 81c35d48
[ 4.210918] 5d40:
805e98a4 8060dd70 00000000 815c6810 810c45b0 81126e90 81126e90 80dd9a3c
[ 4.219112] 5d60:
81c35d8c 81c35d70 80619574 805e9808 815c6810 00000000 810c45b0 81126e90
[ 4.227305] 5d80:
81c35db4 81c35d90 806168dc 80619514 80625df0 80623c80 815c6810 810c45b0
[ 4.235498] 5da0:
81c35e6c 815c6810 81c35dec 81c35db8 80616d04 80616800 81c35de4 81c35dc8
[ 4.243691] 5dc0:
808382b0 80b2f444 8116e310 8116e314 81c35e6c 815c6810 00000003 80dd9a3c
[ 4.251884] 5de0:
81c35e14 81c35df0 80616ec8 80616c60 00000001 810c45b0 81c35e6c 815c6810
[ 4.260076] 5e00:
00000001 80dd9a3c 81c35e34 81c35e18 80617338 80616e90 00000000 81c35e6c
[ 4.268269] 5e20:
80617284 81c34000 81c35e64 81c35e38 80614730 80617290 81c35e64 8171a06c
[ 4.276461] 5e40:
81e220b8 7dbb550b 815c6810 81c34000 815c6854 81126e90 81c35e9c 81c35e68
[ 4.284654] 5e60:
8061673c 806146a8 8060f5e0 815c6810 00000001 7dbb550b 00000000 810c5080
[ 4.292847] 5e80:
810c5320 815c6810 81126e90 00000000 81c35eac 81c35ea0 80617554 80616650
[ 4.301040] 5ea0:
81c35ecc 81c35eb0 80615694 80617544 810c5080 810c5080 810c5094 81126e90
[ 4.309233] 5ec0:
81c35efc 81c35ed0 80615c6c 8061560c 80615bc0 810c50c0 817eeb00 81412800
[ 4.317425] 5ee0:
814c3000 00000000 814c300d 81119a60 81c35f3c 81c35f00 80141488 80615bcc
[ 4.325618] 5f00:
81c60000 81c34000 81c35f24 81c35f18 80143078 817eeb00 81412800 817eeb18
[ 4.333811] 5f20:
81412818 81003d00 00000088 81412800 81c35f74 81c35f40 80141a48 80141298
[ 4.342005] 5f40:
81c35f74 81c34000 801481ac 817efa40 817efc00 801417d8 817eeb00 00000000
[ 4.350199] 5f60:
815a7e7c 81c34000 81c35fac 81c35f78 80149b1c 801417e4 817efc20 817efc20
[ 4.358391] 5f80:
ffffe000 817efa40 801499a8 00000000 00000000 00000000 00000000 00000000
[ 4.366583] 5fa0:
00000000 81c35fb0 80100130 801499b4 00000000 00000000 00000000 00000000
[ 4.374774] 5fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.382966] 5fe0:
00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 4.391155] Backtrace:
[ 4.393613] [<
805eadcc>] (stdp2690_get_edid) from [<
805eb138>] (ge_b850v3_lvds_get_modes+0x2c/0x5c)
[ 4.402691] r10:
81c73840 r9:
81c73894 r8:
816d9800 r7:
00001000 r6:
824addc0 r5:
81c73840
[ 4.410534] r4:
810c35f0
[ 4.413073] [<
805eb10c>] (ge_b850v3_lvds_get_modes) from [<
80594188>] (drm_helper_probe_single_connector_modes+0x1d4/0x84c)
[ 4.424240] r5:
00000045 r4:
810c35f0
[ 4.427822] [<
80593fb4>] (drm_helper_probe_single_connector_modes) from [<
805d9694>] (drm_client_modeset_probe+0x200/0x1384)
[ 4.439074] r10:
00000002 r9:
00001000 r8:
81e1ce40 r7:
00001000 r6:
826282c8 r5:
826282c8
[ 4.446917] r4:
00000008
[ 4.449455] [<
805d9494>] (drm_client_modeset_probe) from [<
805a7f18>] (__drm_fb_helper_initial_config_and_unlock+0x54/0x5b4)
[ 4.460713] r10:
0000000c r9:
81c40908 r8:
81e1ce40 r7:
810c35f4 r6:
00000010 r5:
00000010
[ 4.468556] r4:
81fbb700
[ 4.471095] [<
805a7ec4>] (__drm_fb_helper_initial_config_and_unlock) from [<
805a8c78>] (drm_fbdev_client_hotplug+0x11c/0x1b0)
[ 4.482434] r10:
0000000c r9:
81c40908 r8:
81e1ce40 r7:
810c35f4 r6:
00000010 r5:
816d9800
[ 4.490276] r4:
81fbb700
[ 4.492814] [<
805a8b5c>] (drm_fbdev_client_hotplug) from [<
805a8dc4>] (drm_fbdev_generic_setup+0xb8/0x1a4)
[ 4.502494] r7:
00000000 r6:
00000010 r5:
81fbb700 r4:
816d9800
[ 4.508160] [<
805a8d0c>] (drm_fbdev_generic_setup) from [<
805e47b0>] (imx_drm_bind+0xf0/0x130)
[ 4.516805] r7:
810c42d0 r6:
8179f810 r5:
00000000 r4:
816d9800
[ 4.522474] [<
805e46c0>] (imx_drm_bind) from [<
8060db1c>] (try_to_bring_up_master+0x22c/0x2f0)
[ 4.531116] r7:
81126b60 r6:
81c40908 r5:
81e1ea80 r4:
824aa240
[ 4.536783] [<
8060d8f0>] (try_to_bring_up_master) from [<
8060dc9c>] (__component_add+0xbc/0x184)
[ 4.545597] r10:
815c6810 r9:
80dd9a3c r8:
80c4b95c r7:
810c4d6c r6:
00000000 r5:
81e1ea80
[ 4.553440] r4:
81fe9740
[ 4.555980] [<
8060dbe0>] (__component_add) from [<
8060dd80>] (component_add+0x1c/0x20)
[ 4.563921] r7:
eefd8e00 r6:
815c6810 r5:
815c6800 r4:
8246b440
[ 4.569589] [<
8060dd64>] (component_add) from [<
805e98a4>] (dw_hdmi_imx_probe+0xa8/0xe8)
[ 4.577702] [<
805e97fc>] (dw_hdmi_imx_probe) from [<
80619574>] (platform_probe+0x6c/0xc8)
[ 4.585908] r9:
80dd9a3c r8:
81126e90 r7:
81126e90 r6:
810c45b0 r5:
815c6810 r4:
00000000
[ 4.593662] [<
80619508>] (platform_probe) from [<
806168dc>] (really_probe+0xe8/0x460)
[ 4.601524] r7:
81126e90 r6:
810c45b0 r5:
00000000 r4:
815c6810
[ 4.607191] [<
806167f4>] (really_probe) from [<
80616d04>] (__driver_probe_device+0xb0/0x230)
[ 4.615658] r7:
815c6810 r6:
81c35e6c r5:
810c45b0 r4:
815c6810
[ 4.621326] [<
80616c54>] (__driver_probe_device) from [<
80616ec8>] (driver_probe_device+0x44/0xe0)
[ 4.630313] r9:
80dd9a3c r8:
00000003 r7:
815c6810 r6:
81c35e6c r5:
8116e314 r4:
8116e310
[ 4.638068] [<
80616e84>] (driver_probe_device) from [<
80617338>] (__device_attach_driver+0xb4/0x12c)
[ 4.647227] r9:
80dd9a3c r8:
00000001 r7:
815c6810 r6:
81c35e6c r5:
810c45b0 r4:
00000001
[ 4.654981] [<
80617284>] (__device_attach_driver) from [<
80614730>] (bus_for_each_drv+0x94/0xd8)
[ 4.663794] r7:
81c34000 r6:
80617284 r5:
81c35e6c r4:
00000000
[ 4.669461] [<
8061469c>] (bus_for_each_drv) from [<
8061673c>] (__device_attach+0xf8/0x190)
[ 4.677753] r7:
81126e90 r6:
815c6854 r5:
81c34000 r4:
815c6810
[ 4.683419] [<
80616644>] (__device_attach) from [<
80617554>] (device_initial_probe+0x1c/0x20)
[ 4.691971] r8:
00000000 r7:
81126e90 r6:
815c6810 r5:
810c5320 r4:
810c5080
[ 4.698681] [<
80617538>] (device_initial_probe) from [<
80615694>] (bus_probe_device+0x94/0x9c)
[ 4.707318] [<
80615600>] (bus_probe_device) from [<
80615c6c>] (deferred_probe_work_func+0xac/0xf0)
[ 4.716305] r7:
81126e90 r6:
810c5094 r5:
810c5080 r4:
810c5080
[ 4.721973] [<
80615bc0>] (deferred_probe_work_func) from [<
80141488>] (process_one_work+0x1fc/0x54c)
[ 4.731139] r10:
81119a60 r9:
814c300d r8:
00000000 r7:
814c3000 r6:
81412800 r5:
817eeb00
[ 4.738981] r4:
810c50c0 r3:
80615bc0
[ 4.742563] [<
8014128c>] (process_one_work) from [<
80141a48>] (worker_thread+0x270/0x570)
[ 4.750765] r10:
81412800 r9:
00000088 r8:
81003d00 r7:
81412818 r6:
817eeb18 r5:
81412800
[ 4.758608] r4:
817eeb00
[ 4.761147] [<
801417d8>] (worker_thread) from [<
80149b1c>] (kthread+0x174/0x190)
[ 4.768574] r10:
81c34000 r9:
815a7e7c r8:
00000000 r7:
817eeb00 r6:
801417d8 r5:
817efc00
[ 4.776417] r4:
817efa40
[ 4.778955] [<
801499a8>] (kthread) from [<
80100130>] (ret_from_fork+0x14/0x24)
[ 4.786201] Exception stack(0x81c35fb0 to 0x81c35ff8)
[ 4.791266] 5fa0:
00000000 00000000 00000000 00000000
[ 4.799459] 5fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 4.807651] 5fe0:
00000000 00000000 00000000 00000000 00000013 00000000
[ 4.814279] r10:
00000000 r9:
00000000 r8:
00000000 r7:
00000000 r6:
00000000 r5:
801499a8
[ 4.822120] r4:
817efa40
[ 4.824664] Code:
e3a02080 e593001c e3a01d33 e3a05000 (
e5979018)
Split the registration from the STDP4028 probe routine and only perform
registration once both the STDP4028 and STDP2690 have probed.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
CC: Peter Senna Tschudin <peter.senna@gmail.com>
CC: Martyn Welch <martyn.welch@collabora.co.uk>
CC: Neil Armstrong <narmstrong@baylibre.com>
CC: Robert Foss <robert.foss@linaro.org>
CC: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
CC: Jonas Karlman <jonas@kwiboo.se>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/43552c3404e8fdf92d8bc5658fac24e9f03c2c57.1637836606.git.martyn.welch@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Danielle Ratson [Tue, 23 Nov 2021 07:54:47 +0000 (09:54 +0200)]
mlxsw: pci: Add shutdown method in PCI driver
[ Upstream commit
c1020d3cf4752f61a6a413f632ea2ce2370e150d ]
On an arm64 platform with the Spectrum ASIC, after loading and executing
a new kernel via kexec, the following trace [1] is observed. This seems
to be caused by the fact that the device is not properly shutdown before
executing the new kernel.
Fix this by implementing a shutdown method which mirrors the remove
method, as recommended by the kexec maintainer [2][3].
[1]
BUG: Bad page state in process devlink pfn:22f73d
page:
fffffe00089dcf40 refcount:-1 mapcount:0 mapping:
0000000000000000 index:0x0
flags: 0x2ffff00000000000()
raw:
2ffff00000000000 0000000000000000 ffffffff089d0201 0000000000000000
raw:
0000000000000000 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
Modules linked in:
CPU: 1 PID: 16346 Comm: devlink Tainted: G B 5.8.0-rc6-custom-273020-gac6b365b1bf5 #44
Hardware name: Marvell Armada 7040 TX4810M (DT)
Call trace:
dump_backtrace+0x0/0x1d0
show_stack+0x1c/0x28
dump_stack+0xbc/0x118
bad_page+0xcc/0xf8
check_free_page_bad+0x80/0x88
__free_pages_ok+0x3f8/0x418
__free_pages+0x38/0x60
kmem_freepages+0x200/0x2a8
slab_destroy+0x28/0x68
slabs_destroy+0x60/0x90
___cache_free+0x1b4/0x358
kfree+0xc0/0x1d0
skb_free_head+0x2c/0x38
skb_release_data+0x110/0x1a0
skb_release_all+0x2c/0x38
consume_skb+0x38/0x130
__dev_kfree_skb_any+0x44/0x50
mlxsw_pci_rdq_fini+0x8c/0xb0
mlxsw_pci_queue_fini.isra.0+0x28/0x58
mlxsw_pci_queue_group_fini+0x58/0x88
mlxsw_pci_aqs_fini+0x2c/0x60
mlxsw_pci_fini+0x34/0x50
mlxsw_core_bus_device_unregister+0x104/0x1d0
mlxsw_devlink_core_bus_device_reload_down+0x2c/0x48
devlink_reload+0x44/0x158
devlink_nl_cmd_reload+0x270/0x290
genl_rcv_msg+0x188/0x2f0
netlink_rcv_skb+0x5c/0x118
genl_rcv+0x3c/0x50
netlink_unicast+0x1bc/0x278
netlink_sendmsg+0x194/0x390
__sys_sendto+0xe0/0x158
__arm64_sys_sendto+0x2c/0x38
el0_svc_common.constprop.0+0x70/0x168
do_el0_svc+0x28/0x88
el0_sync_handler+0x88/0x190
el0_sync+0x140/0x180
[2]
https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1195432.html
[3]
https://patchwork.kernel.org/project/linux-scsi/patch/
20170212214920.28866-1-anton@ozlabs.org/#
20116693
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jan Kiszka [Mon, 21 Jun 2021 18:08:28 +0000 (20:08 +0200)]
soc: ti: pruss: fix referenced node in error message
[ Upstream commit
8aa35e0bb5eaa42bac415ad0847985daa7b4890c ]
So far, "(null)" is reported for the node that is missing clocks.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/d6e24953-ea89-fd1c-6e16-7a0142118054@siemens.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Deucher [Wed, 10 Nov 2021 15:23:25 +0000 (10:23 -0500)]
drm/amdgpu/display: set vblank_disable_immediate for DC
[ Upstream commit
92020e81ddbeac351ea4a19bcf01743f32b9c800 ]
Disable vblanks immediately to save power. I think this was
missed when we merged DC support.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1781
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Li [Mon, 15 Nov 2021 08:10:19 +0000 (16:10 +0800)]
drm/amd/display: check top_pipe_to_program pointer
[ Upstream commit
a689e8d1f80012f90384ebac9dcfac4201f9f77e ]
Clang static analysis reports this error
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2870:7: warning:
Dereference of null pointer [clang-analyzer-core.NullDereference]
if
(top_pipe_to_program->stream_res.tg->funcs->lock_doublebuffer_enable) {
^
top_pipe_to_program being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lukas Bulwahn [Thu, 28 Oct 2021 14:19:33 +0000 (16:19 +0200)]
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
[ Upstream commit
b0100bce4ff82ec1ccd3c1f3d339fd2df6a81784 ]
Since commit
4b563a066611 ("ARM: imx: Remove imx21 support"), the config
DEBUG_IMX21_IMX27_UART is really only debug support for IMX27.
So, rename this option to DEBUG_IMX27_UART and adjust dependencies in
Kconfig and rename the definitions to IMX27 as further clean-up.
This issue was discovered with ./scripts/checkkconfigsymbols.py, which
reported that DEBUG_IMX21_IMX27_UART depends on the non-existing config
SOC_IMX21.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinh Nguyen [Tue, 12 Oct 2021 19:07:06 +0000 (14:07 -0500)]
EDAC/synopsys: Use the quirk for version instead of ddr version
[ Upstream commit
bd1d6da17c296bd005bfa656952710d256e77dd3 ]
Version 2.40a supports DDR_ECC_INTR_SUPPORT for a quirk, so use that
quirk to determine a call to setup_address_map().
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lkml.kernel.org/r/20211012190709.1504152-1-dinguyen@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheyu Ma [Tue, 11 May 2021 09:00:03 +0000 (10:00 +0100)]
media: b2c2: Add missing check in flexcop_pci_isr:
[ Upstream commit
b13203032e679674c7c518f52a7ec0801ca3a829 ]
A out-of-bounds bug can be triggered by an interrupt, the reason for
this bug is the lack of checking of register values.
In flexcop_pci_isr, the driver reads value from a register and uses it as
a dma address. Finally, this address will be passed to the count parameter
of find_next_packet. If this value is larger than the size of dma, the
index of buffer will be out-of-bounds.
Fix this by adding a check after reading the value of the register.
The following KASAN report reveals it:
BUG: KASAN: slab-out-of-bounds in find_next_packet
drivers/media/dvb-core/dvb_demux.c:528 [inline]
BUG: KASAN: slab-out-of-bounds in _dvb_dmx_swfilter
drivers/media/dvb-core/dvb_demux.c:572 [inline]
BUG: KASAN: slab-out-of-bounds in dvb_dmx_swfilter+0x3fa/0x420
drivers/media/dvb-core/dvb_demux.c:603
Read of size 1 at addr
ffff8880608c00a0 by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xec/0x156 lib/dump_stack.c:118
print_address_description+0x78/0x290 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x25b/0x380 mm/kasan/report.c:412
__asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:430
find_next_packet drivers/media/dvb-core/dvb_demux.c:528 [inline]
_dvb_dmx_swfilter drivers/media/dvb-core/dvb_demux.c:572 [inline]
dvb_dmx_swfilter+0x3fa/0x420 drivers/media/dvb-core/dvb_demux.c:603
flexcop_pass_dmx_data+0x2e/0x40 drivers/media/common/b2c2/flexcop.c:167
flexcop_pci_isr+0x3d1/0x5d0 drivers/media/pci/b2c2/flexcop-pci.c:212
__handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149
handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189
handle_irq_event+0xac/0x140 kernel/irq/handle.c:206
handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725
generic_handle_irq_desc include/linux/irqdesc.h:155 [inline]
handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87
do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247
common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670
</IRQ>
RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61
Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 62 2f 8c 48 89 e5 e8 fb 31
e8 f8 8b 05 75 4f 8e 03 85 c0 7e 07 0f 00 2d 8a 61 66 00 fb f4 <5d> c3
90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41
RSP: 0018:
ffff88806b71fcc8 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffffde
RAX:
0000000000000000 RBX:
ffffffff8bde44c8 RCX:
ffffffff88a11285
RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffff8c2f6200
RBP:
ffff88806b71fcc8 R08:
fffffbfff185ec40 R09:
fffffbfff185ec40
R10:
0000000000000001 R11:
fffffbfff185ec40 R12:
0000000000000002
R13:
ffffffff8be9d6e0 R14:
0000000000000000 R15:
0000000000000000
arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
default_idle+0x6f/0x360 arch/x86/kernel/process.c:557
arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548
default_idle_call+0x3b/0x60 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263
cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369
start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Allocated by task 1:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:553
kasan_slab_alloc+0x11/0x20 mm/kasan/kasan.c:490
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2741 [inline]
slab_alloc mm/slub.c:2749 [inline]
kmem_cache_alloc+0xeb/0x280 mm/slub.c:2754
kmem_cache_zalloc include/linux/slab.h:699 [inline]
__kernfs_new_node+0xe2/0x6f0 fs/kernfs/dir.c:633
kernfs_new_node+0x9a/0x120 fs/kernfs/dir.c:693
__kernfs_create_file+0x5f/0x340 fs/kernfs/file.c:992
sysfs_add_file_mode_ns+0x22a/0x4e0 fs/sysfs/file.c:306
create_files fs/sysfs/group.c:63 [inline]
internal_create_group+0x34e/0xc30 fs/sysfs/group.c:147
sysfs_create_group fs/sysfs/group.c:173 [inline]
sysfs_create_groups+0x9c/0x140 fs/sysfs/group.c:200
driver_add_groups+0x3e/0x50 drivers/base/driver.c:129
bus_add_driver+0x3a5/0x790 drivers/base/bus.c:684
driver_register+0x1cd/0x410 drivers/base/driver.c:170
__pci_register_driver+0x197/0x200 drivers/pci/pci-driver.c:1411
cx88_audio_pci_driver_init+0x23/0x25 drivers/media/pci/cx88/cx88-alsa.c:
1017
do_one_initcall+0xe0/0x610 init/main.c:884
do_initcall_level init/main.c:952 [inline]
do_initcalls init/main.c:960 [inline]
do_basic_setup init/main.c:978 [inline]
kernel_init_freeable+0x4d0/0x592 init/main.c:1145
kernel_init+0x18/0x190 init/main.c:1062
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:415
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at
ffff8880608c0000
which belongs to the cache kernfs_node_cache of size 160
The buggy address is located 0 bytes to the right of
160-byte region [
ffff8880608c0000,
ffff8880608c00a0)
The buggy address belongs to the page:
page:
ffffea0001823000 count:1 mapcount:0 mapping:
ffff88806bed1e00
index:0x0 compound_mapcount: 0
flags: 0x100000000008100(slab|head)
raw:
0100000000008100 dead000000000100 dead000000000200 ffff88806bed1e00
raw:
0000000000000000 0000000000240024 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880608bff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>
ffff8880608c0080: 00 00 00 00 fc fc fc fc fc fc fc fc 00 00 00 00
^
ffff8880608c0100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff8880608c0180: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lore.kernel.org/linux-media/1620723603-30912-1-git-send-email-zheyuma97@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
José Expósito [Thu, 18 Nov 2021 07:29:53 +0000 (08:29 +0100)]
HID: apple: Do not reset quirks when the Fn key is not found
[ Upstream commit
a5fe7864d8ada170f19cc47d176bf8260ffb4263 ]
When a keyboard without a function key is detected, instead of removing
all quirks, remove only the APPLE_HAS_FN quirk.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 6 Nov 2021 13:02:27 +0000 (14:02 +0100)]
drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Book X91F/L
[ Upstream commit
bc30c3b0c8a1904d83d5f0d60fb8650a334b207b ]
The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106130227.11927-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavankumar Kondeti [Fri, 12 Nov 2021 10:24:40 +0000 (15:54 +0530)]
usb: gadget: f_fs: Use stream_open() for endpoint files
[ Upstream commit
c76ef96fc00eb398c8fc836b0eb2f82bcc619dc7 ]
Function fs endpoint file operations are synchronized via an interruptible
mutex wait. However we see threads that do ep file operations concurrently
are getting blocked for the mutex lock in __fdget_pos(). This is an
uninterruptible wait and we see hung task warnings and kernel panic
if hung_task_panic systcl is enabled if host does not send/receive
the data for long time.
The reason for threads getting blocked in __fdget_pos() is due to
the file position protection introduced by the commit
9c225f2655e3
("vfs: atomic f_pos accesses as per POSIX"). Since function fs
endpoint files does not have the notion of the file position, switch
to the stream mode. This will bypass the file position mutex and
threads will be blocked in interruptible state for the function fs
mutex.
It should not affects user space as we are only changing the task state
changes the task state from UNINTERRUPTIBLE to INTERRUPTIBLE while waiting
for the USB transfers to be finished. However there is a slight change to
the O_NONBLOCK behavior. Earlier threads that are using O_NONBLOCK are also
getting blocked inside fdget_pos(). Now they reach to function fs and error
code is returned. The non blocking behavior is actually honoured now.
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Link: https://lore.kernel.org/r/1636712682-1226-1-git-send-email-quic_pkondeti@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baochen Qiang [Tue, 26 Oct 2021 01:16:05 +0000 (09:16 +0800)]
ath11k: Fix crash caused by uninitialized TX ring
[ Upstream commit
273703ebdb01b6c5f1aaf4b98fb57b177609055c ]
Commit
31582373a4a8 ("ath11k: Change number of TCL rings to one for
QCA6390") avoids initializing the other entries of dp->tx_ring cause
the corresponding TX rings on QCA6390/WCN6855 are not used, but leaves
those ring masks in ath11k_hw_ring_mask_qca6390.tx unchanged. Normally
this is OK because we will only get interrupts from the first TX ring
on these chips and thus only the first entry of dp->tx_ring is involved.
In case of one MSI vector, all DP rings share the same IRQ. For each
interrupt, all rings have to be checked, which means the other entries
of dp->tx_ring are involved. However since they are not initialized,
system crashes.
Fix this issue by simply removing those ring masks.
crash stack:
[ 102.907438] BUG: kernel NULL pointer dereference, address:
0000000000000028
[ 102.907447] #PF: supervisor read access in kernel mode
[ 102.907451] #PF: error_code(0x0000) - not-present page
[ 102.907453] PGD
1081f0067 P4D
1081f0067 PUD
1081f1067 PMD 0
[ 102.907460] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 102.907465] CPU: 0 PID: 3511 Comm: apt-check Kdump: loaded Tainted: G E 5.15.0-rc4-wt-ath+ #20
[ 102.907470] Hardware name: AMD Celadon-RN/Celadon-RN, BIOS RCD1005E 10/08/2020
[ 102.907472] RIP: 0010:ath11k_dp_tx_completion_handler+0x201/0x830 [ath11k]
[ 102.907497] Code: 3c 24 4e 8d ac 37 10 04 00 00 4a 8d bc 37 68 04 00 00 48 89 3c 24 48 63 c8 89 83 84 18 00 00 48 c1 e1 05 48 03 8b 78 18 00 00 <8b> 51 08 89 d6 83 e6 07 89 74 24 24 83 fe 03 74 04 85 f6 75 63 41
[ 102.907501] RSP: 0000:
ffff9b7340003e08 EFLAGS:
00010202
[ 102.907505] RAX:
0000000000000001 RBX:
ffff8e21530c0100 RCX:
0000000000000020
[ 102.907508] RDX:
0000000000000000 RSI:
00000000fffffe00 RDI:
ffff8e21530c1938
[ 102.907511] RBP:
ffff8e21530c0000 R08:
0000000000000001 R09:
0000000000000000
[ 102.907513] R10:
ffff8e2145534c10 R11:
0000000000000001 R12:
ffff8e21530c2938
[ 102.907515] R13:
ffff8e21530c18e0 R14:
0000000000000100 R15:
ffff8e21530c2978
[ 102.907518] FS:
00007f5d4297e740(0000) GS:
ffff8e243d600000(0000) knlGS:
0000000000000000
[ 102.907521] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 102.907524] CR2:
0000000000000028 CR3:
00000001034ea000 CR4:
0000000000350ef0
[ 102.907527] Call Trace:
[ 102.907531] <IRQ>
[ 102.907537] ath11k_dp_service_srng+0x5c/0x2f0 [ath11k]
[ 102.907556] ath11k_pci_ext_grp_napi_poll+0x21/0x70 [ath11k_pci]
[ 102.907562] __napi_poll+0x2c/0x160
[ 102.907570] net_rx_action+0x251/0x310
[ 102.907576] __do_softirq+0x107/0x2fc
[ 102.907585] irq_exit_rcu+0x74/0x90
[ 102.907593] common_interrupt+0x83/0xa0
[ 102.907600] </IRQ>
[ 102.907601] asm_common_interrupt+0x1e/0x40
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211026011605.58615-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Thu, 11 Nov 2021 23:04:09 +0000 (23:04 +0000)]
media: atomisp: handle errors at sh_css_create_isp_params()
[ Upstream commit
58043dbf6d1ae9deab4f5aa1e039c70112017682 ]
The succ var tracks memory allocation erros on this function.
Fix it, in order to stop this W=1 Werror in clang:
drivers/staging/media/atomisp/pci/sh_css_params.c:2430:7: error: variable 'succ' set but not used [-Werror,-Wunused-but-set-variable]
bool succ = true;
^
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Lüssing [Sun, 31 Oct 2021 21:30:12 +0000 (22:30 +0100)]
batman-adv: allow netlink usage in unprivileged containers
[ Upstream commit
9057d6c23e7388ee9d037fccc9a7bc8557ce277b ]
Currently, creating a batman-adv interface in an unprivileged LXD
container and attaching secondary interfaces to it with "ip" or "batctl"
works fine. However all batctl debug and configuration commands
fail:
root@container:~# batctl originators
Error received: Operation not permitted
root@container:~# batctl orig_interval
1000
root@container:~# batctl orig_interval 2000
root@container:~# batctl orig_interval
1000
To fix this change the generic netlink permissions from GENL_ADMIN_PERM
to GENL_UNS_ADMIN_PERM. This way a batman-adv interface is fully
maintainable as root from within a user namespace, from an unprivileged
container.
All except one batman-adv netlink setting are per interface and do not
leak information or change settings from the host system and are
therefore save to retrieve or modify as root from within an unprivileged
container.
"batctl routing_algo" / BATADV_CMD_GET_ROUTING_ALGOS is the only
exception: It provides the batman-adv kernel module wide default routing
algorithm. However it is read-only from netlink and an unprivileged
container is still not allowed to modify
/sys/module/batman_adv/parameters/routing_algo. Instead it is advised to
use the newly introduced "batctl if create routing_algo RA_NAME" /
IFLA_BATADV_ALGO_NAME to set the routing algorithm on interface
creation, which already works fine in an unprivileged container.
Cc: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wan Jiabing [Mon, 18 Oct 2021 01:45:03 +0000 (21:45 -0400)]
ARM: shmobile: rcar-gen2: Add missing of_node_put()
[ Upstream commit
85744f2d938c5f3cfc44cb6533c157469634da93 ]
Fix following coccicheck warning:
./arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c:156:1-33: Function
for_each_matching_node_and_match should have of_node_put() before break
and goto.
Early exits from for_each_matching_node_and_match() should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211018014503.7598-1-wanjiabing@vivo.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sun, 7 Nov 2021 17:15:48 +0000 (17:15 +0000)]
media: atomisp-ov2680: Fix ov2680_set_fmt() clobbering the exposure
[ Upstream commit
4492289c31364d28c2680b43b18883385a5d216c ]
Now that we restore the default or last user set exposure setting on
power_up() there is no need for the registers written by ov2680_set_fmt()
to write to the exposure register.
Not doing so fixes the exposure always being reset to the value from
the res->regs array after a set_fmt().
Link: https://lore.kernel.org/linux-media/20211107171549.267583-11-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Fri, 29 Oct 2021 07:09:39 +0000 (08:09 +0100)]
media: atomisp: set per-device's default mode
[ Upstream commit
2c45e343c581091835c9047ed5298518aa133163 ]
The atomisp driver originally used the s_parm command to
initialize the run_mode type to the driver. So, before start
setting up the streaming, s_parm should be called.
So, even having 5 "normal" video devices, one meant to be used
for each type, the run_mode was actually selected when
s_parm is called.
Without setting the run mode, applications that don't call
VIDIOC_SET_PARM with a custom atomisp parameters won't work, as
the pipeline won't be set:
atomisp-isp2 0000:00:03.0: can't create streams
atomisp-isp2 0000:00:03.0: __get_frame_info 1600x1200 (padded to 0) returned -22
However, commit
8a7c5594c020 ("media: v4l2-ioctl: clear fields in s_parm")
broke support for it, with a good reason, as drivers shoudn't be
extending the API for their own purposes.
So, as an step to allow generic apps to use this driver, put
the device's run_mode in preview after open.
After this patch, using v4l2grab starts to work on preview
mode (/dev/video2):
$ v4l2grab -f YUYV -x 1600 -y 1200 -d /dev/video2 -n 1 -u
$ feh out000.pnm
So, let's just setup the default run_mode that each video devnode
should assume, setting it at open() time.
Reported-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mauro Carvalho Chehab [Thu, 4 Nov 2021 11:45:27 +0000 (11:45 +0000)]
media: atomisp: fix try_fmt logic
[ Upstream commit
c9e9094c4e42124af909b2f5f6ded0498e0854ac ]
The internal try_fmt logic is not meant to provide everything
that the V4L2 API should provide. Also, it doesn't decrement
the pads that are used only internally by the driver, but aren't
part of the device's output.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Skeggs [Wed, 24 Feb 2021 09:29:52 +0000 (19:29 +1000)]
drm/nouveau/pmu/gm200-: avoid touching PMU outside of DEVINIT/PREOS/ACR
[ Upstream commit
1d2271d2fb85e54bfc9630a6c30ac0feb9ffb983 ]
There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it. This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.
However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.
Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neil Armstrong [Fri, 29 Oct 2021 13:59:47 +0000 (15:59 +0200)]
drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR
[ Upstream commit
3f2532d65a571ca02258b547b5b68ab2e9406fdb ]
The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.
But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.
The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.
Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed typo in commit log]
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zekun Shen [Thu, 28 Oct 2021 22:37:49 +0000 (18:37 -0400)]
ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
[ Upstream commit
ae80b6033834342601e99f74f6a62ff5092b1cee ]
Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
ar5523_cmd+0x46a/0x581 [ar5523]
ar5523_probe.cold+0x1b7/0x18da [ar5523]
? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
? __pm_runtime_set_status+0x54a/0x8f0
? _raw_spin_trylock_bh+0x120/0x120
? pm_runtime_barrier+0x220/0x220
? __pm_runtime_resume+0xb1/0xf0
usb_probe_interface+0x25b/0x710
really_probe+0x209/0x5d0
driver_probe_device+0xc6/0x1b0
device_driver_attach+0xe2/0x120
I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.
After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.
This was NOT tested on a real device.
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Sun, 7 Nov 2021 16:55:21 +0000 (08:55 -0800)]
selftests/bpf: Fix bpf_object leak in skb_ctx selftest
[ Upstream commit
8c7a95520184b6677ca6075e12df9c208d57d088 ]
skb_ctx selftest didn't close bpf_object implicitly allocated by
bpf_prog_test_load() helper. Fix the problem by explicitly calling
bpf_object__close() at the end of the test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-10-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiang Yu [Sun, 31 Oct 2021 04:16:04 +0000 (12:16 +0800)]
drm/lima: fix warning when CONFIG_DEBUG_SG=y & CONFIG_DMA_API_DEBUG=y
[ Upstream commit
89636a06fa2ee7826a19c39c19a9bc99ab9340a9 ]
Otherwise get following warning:
DMA-API: lima 1c40000.gpu: mapping sg segment longer than device claims to support [len=4149248] [max=65536]
See: https://gitlab.freedesktop.org/mesa/mesa/-/issues/5496
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reported-by: Roman Stratiienko <r.stratiienko@gmail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211031041604.187216-1-yuq825@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Aring [Tue, 2 Nov 2021 19:17:24 +0000 (15:17 -0400)]
fs: dlm: filter user dlm messages for kernel locks
[ Upstream commit
6c2e3bf68f3e5e5a647aa52be246d5f552d7496d ]
This patch fixes the following crash by receiving a invalid message:
[ 160.672220] ==================================================================
[ 160.676206] BUG: KASAN: user-memory-access in dlm_user_add_ast+0xc3/0x370
[ 160.679659] Read of size 8 at addr
00000000deadbeef by task kworker/u32:13/319
[ 160.681447]
[ 160.681824] CPU: 10 PID: 319 Comm: kworker/u32:13 Not tainted 5.14.0-rc2+ #399
[ 160.683472] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.14.0-1.module+el8.6.0+12648+
6ede71a5 04/01/2014
[ 160.685574] Workqueue: dlm_recv process_recv_sockets
[ 160.686721] Call Trace:
[ 160.687310] dump_stack_lvl+0x56/0x6f
[ 160.688169] ? dlm_user_add_ast+0xc3/0x370
[ 160.689116] kasan_report.cold.14+0x116/0x11b
[ 160.690138] ? dlm_user_add_ast+0xc3/0x370
[ 160.690832] dlm_user_add_ast+0xc3/0x370
[ 160.691502] _receive_unlock_reply+0x103/0x170
[ 160.692241] _receive_message+0x11df/0x1ec0
[ 160.692926] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.693700] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.694427] ? lock_acquire+0x175/0x400
[ 160.695058] ? do_purge.isra.51+0x200/0x200
[ 160.695744] ? lock_acquired+0x360/0x5d0
[ 160.696400] ? lock_contended+0x6a0/0x6a0
[ 160.697055] ? lock_release+0x21d/0x5e0
[ 160.697686] ? lock_is_held_type+0xe0/0x110
[ 160.698352] ? lock_is_held_type+0xe0/0x110
[ 160.699026] ? ___might_sleep+0x1cc/0x1e0
[ 160.699698] ? dlm_wait_requestqueue+0x94/0x140
[ 160.700451] ? dlm_process_requestqueue+0x240/0x240
[ 160.701249] ? down_write_killable+0x2b0/0x2b0
[ 160.701988] ? do_raw_spin_unlock+0xa2/0x130
[ 160.702690] dlm_receive_buffer+0x1a5/0x210
[ 160.703385] dlm_process_incoming_buffer+0x726/0x9f0
[ 160.704210] receive_from_sock+0x1c0/0x3b0
[ 160.704886] ? dlm_tcp_shutdown+0x30/0x30
[ 160.705561] ? lock_acquire+0x175/0x400
[ 160.706197] ? rcu_read_lock_sched_held+0xa1/0xd0
[ 160.706941] ? rcu_read_lock_bh_held+0xb0/0xb0
[ 160.707681] process_recv_sockets+0x32/0x40
[ 160.708366] process_one_work+0x55e/0xad0
[ 160.709045] ? pwq_dec_nr_in_flight+0x110/0x110
[ 160.709820] worker_thread+0x65/0x5e0
[ 160.710423] ? process_one_work+0xad0/0xad0
[ 160.711087] kthread+0x1ed/0x220
[ 160.711628] ? set_kthread_struct+0x80/0x80
[ 160.712314] ret_from_fork+0x22/0x30
The issue is that we received a DLM message for a user lock but the
destination lock is a kernel lock. Note that the address which is trying
to derefence is
00000000deadbeef, which is in a kernel lock
lkb->lkb_astparam, this field should never be derefenced by the DLM
kernel stack. In case of a user lock lkb->lkb_astparam is lkb->lkb_ua
(memory is shared by a union field). The struct lkb_ua will be handled
by the DLM kernel stack but on a kernel lock it will contain invalid
data and ends in most likely crashing the kernel.
It can be reproduced with two cluster nodes.
node 2:
dlm_tool join test
echo "862 fooobaar 1 2 1" > /sys/kernel/debug/dlm/test_locks
echo "862 3 1" > /sys/kernel/debug/dlm/test_waiters
node 1:
dlm_tool join test
python:
foo = DLM(h_cmd=3, o_nextcmd=1, h_nodeid=1, h_lockspace=0x77222027, \
m_type=7, m_flags=0x1, m_remid=0x862, m_result=0xFFFEFFFE)
newFile = open("/sys/kernel/debug/dlm/comms/2/rawmsg", "wb")
newFile.write(bytes(foo))
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Wed, 13 Oct 2021 08:55:46 +0000 (16:55 +0800)]
Bluetooth: Fix debugfs entry leak in hci_register_dev()
[ Upstream commit
5a4bb6a8e981d3d0d492aa38412ee80b21033177 ]
Fault injection test report debugfs entry leak as follows:
debugfs: Directory 'hci0' with parent 'bluetooth' already present!
When register_pm_notifier() failed in hci_register_dev(), the debugfs
create by debugfs_create_dir() do not removed in the error handing path.
Add the remove debugfs code to fix it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sicelo A. Mhlongo [Sun, 12 Dec 2021 22:40:06 +0000 (23:40 +0100)]
ARM: dts: omap3-n900: Fix lp5523 for multi color
[ Upstream commit
e9af026a3b24f59d7af4609f73e0ef60a4d6d516 ]
Since the LED multicolor framework support was added in commit
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes:
92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes:
ac219bf3c9bd ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baruch Siach [Thu, 30 Dec 2021 16:31:52 +0000 (18:31 +0200)]
of: base: Fix phandle argument length mismatch error message
[ Upstream commit
94a4950a4acff39b5847cc1fee4f65e160813493 ]
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes:
af3be70a3211 ("of: Improve of_phandle_iterator_next() error message")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
Conor Dooley [Thu, 23 Dec 2021 15:42:44 +0000 (15:42 +0000)]
clk: bm1880: remove kfrees on static allocations
[ Upstream commit
c861c1be3897845313a0df47804b1db37c7052e1 ]
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes:
1ab4601da55b ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/20211223154244.1024062-1-conor.dooley@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shengjiu Wang [Wed, 5 Jan 2022 11:08:03 +0000 (19:08 +0800)]
ASoC: fsl_asrc: refine the check of available clock divider
[ Upstream commit
320386343451ab6a3577e0ee200dac56a6182944 ]
According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.
Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.
Fixes:
d0250cf4f2ab ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kamal Heib [Mon, 20 Dec 2021 15:25:30 +0000 (17:25 +0200)]
RDMA/cxgb4: Set queue pair state when being queried
[ Upstream commit
e375b9c92985e409c4bb95dd43d34915ea7f5e28 ]
The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.
Fixes:
67bbc05512d8 ("RDMA/cxgb4: Add query_qp support")
Link: https://lore.kernel.org/r/20211220152530.60399-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alyssa Ross [Tue, 4 Jan 2022 13:22:16 +0000 (13:22 +0000)]
ASoC: fsl_mqs: fix MODULE_ALIAS
[ Upstream commit
9f3d45318dd9e739ed62e4218839a7a824d3cced ]
modprobe can't handle spaces in aliases.
Fixes:
9e28f6532c61 ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20220104132218.1690103-1-hi@alyssa.is
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ammar Faizi [Sun, 26 Dec 2021 13:54:02 +0000 (20:54 +0700)]
powerpc/xive: Add missing null check after calling kmalloc
[ Upstream commit
18dbfcdedc802f9500b2c29794f22a31d27639c0 ]
Commit
930914b7d528fc ("powerpc/xive: Add a debugfs file to dump
internal XIVE state") forgot to add a null check.
Add it.
Fixes:
930914b7d528fc6b0249bffc00564100bcf6ef75 ("powerpc/xive: Add a debugfs file to dump internal XIVE state")
Signed-off-by: Ammar Faizi <ammarfaizi2@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211226135314.251221-1-ammar.faizi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 29 Dec 2021 00:05:53 +0000 (16:05 -0800)]
mips: bcm63xx: add support for clk_set_parent()
[ Upstream commit
6f03055d508ff4feb8db02ba3df9303a1db8d381 ]
The MIPS BMC63XX subarch does not provide/support clk_set_parent().
This causes build errors in a few drivers, so add a simple implementation
of that function so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes:
e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randy Dunlap [Wed, 29 Dec 2021 00:03:45 +0000 (16:03 -0800)]
mips: lantiq: add support for clk_set_parent()
[ Upstream commit
76f66dfd60dc5d2f9dec22d99091fea1035c5d03 ]
Provide a simple implementation of clk_set_parent() in the lantiq
subarch so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes:
171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
--to=linux-mips@vger.kernel.org --cc="John Crispin <john@phrozen.org>" --cc="Jonathan Cameron <jic23@kernel.org>" --cc="Russell King <linux@armlinux.org.uk>" --cc="Andy Shevchenko <andy.shevchenko@gmail.com>" --cc=alsa-devel@alsa-project.org --to="Thomas Bogendoerfer <tsbogend@alpha.franken.de>"
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameer Pujar [Thu, 23 Dec 2021 11:53:51 +0000 (17:23 +0530)]
arm64: tegra: Remove non existent Tegra194 reset
[ Upstream commit
146b3a77af8091cabbd1decc51d67799e69682d2 ]
Tegra194 does not really have "hda2codec_2x" related reset. Hence drop
this entry to reflect actual HW.
Fixes:
4878cc0c9fab ("arm64: tegra: Add HDA controller on Tegra194")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1640260431-11613-4-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sameer Pujar [Wed, 18 Nov 2020 08:06:20 +0000 (13:36 +0530)]
arm64: tegra: Fix Tegra194 HDA {clock,reset}-names ordering
[ Upstream commit
48f6e195039486bc303118948f49a9873acc888f ]
As per the HDA binding doc reorder {clock,reset}-names entries for
Tegra194. This also serves as a preparation for converting existing
binding doc to json-schema.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabrice Gasnier [Fri, 29 Jan 2021 13:22:22 +0000 (14:22 +0100)]
counter: stm32-lptimer-cnt: remove iio counter abi
[ Upstream commit
01f68f067dc39df9c9d95d759ee61517eb4b0fcf ]
Currently, the STM32 LP Timer counter driver registers into both IIO and
counter subsystems, which is redundant.
Remove the IIO counter ABI and IIO registration from the STM32 LP Timer
counter driver since it's been superseded by the Counter subsystem
as discussed in [1].
Keep only the counter subsystem related part.
Move a part of the ABI documentation into a driver comment.
This also removes a duplicate ABI warning
$ scripts/get_abi.pl validate
...
/sys/bus/iio/devices/iio:deviceX/in_count0_preset is defined 2 times:
./Documentation/ABI/testing/sysfs-bus-iio-timer-stm32:100
./Documentation/ABI/testing/sysfs-bus-iio-lptimer-stm32:0
[1] https://lkml.org/lkml/2021/1/19/347
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1611926542-2490-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Tue, 28 Dec 2021 12:55:22 +0000 (12:55 +0000)]
misc: lattice-ecp3-config: Fix task hung when firmware load failed
[ Upstream commit
fcee5ce50bdb21116711e38635e3865594af907e ]
When firmware load failed, kernel report task hung as follows:
INFO: task xrun:5191 blocked for more than 147 seconds.
Tainted: G W 5.16.0-rc5-next-
20211220+ #11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004
Call Trace:
__schedule+0xc12/0x4b50 kernel/sched/core.c:4986
schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1)
schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857
wait_for_completion+0x181/0x290 kernel/sched/completion.c:85
lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221
spi_remove+0x72/0xb0 drivers/spi/spi.c:409
lattice_ecp3_remove() wait for signals from firmware loading, but when
load failed, firmware_load() does not send this signal. This cause
device remove hung. Fix it by sending signal even if load failed.
Fixes:
781551df57c7 ("misc: Add Lattice ECP3 FPGA configuration via SPI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>