drm/amd/display: Have risk for memory exhaustion

In dcn*_clock_source_create when dcn*_clk_src_construct fails allocated
clk_src needs release. A local attack could use this to cause memory
exhaustion.

Signed-off-by: LongJun Tang <tanglongjun@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Replace 1-element array with flexible-array member

One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in structs _ATOM_GPIO_PIN_ASSIGNMENT,
_ATOM_DISPLAY_OBJECT_PATH, _ATOM_DISPLAY_OBJECT_PATH_TABLE,
_ATOM_OBJECT_TABLE and refactor the rest of the code accordingly.

Important to mention is that doing a build before/after this patch results
in no functional binary output differences.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Add the missed acpi_put_table() to fix memory leak

When the radeon driver reads the bios information from ACPI
table in radeon_acpi_vfct_bios(), it misses to call acpi_put_table()
to release the ACPI memory after the init, so add acpi_put_table()
properly to fix the memory leak.

v2: fix text formatting (Alex)

Fixes: 268ba0a99f89 ("drm/radeon: implement ACPI VFCT vbios fetch (v3)")
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: complete gfxoff allow signal during suspend without delay

change guarantees that gfxoff is allowed before moving further in
s2idle sequence to add more reliablity about gfxoff in amdgpu IP's
suspend flow

Signed-off-by: Harsh Jain <harsh.jain@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Decouple RAS EEPROM addresses from chips

Abstract RAS I2C EEPROM addresses from chip names, and set their macro
definition names to the address they set, not the chip they attach
to. Since most chips either use I2C EEPROM address 0 or 40000h for the RAS
table start offset, this leaves us with only two macro definitions as
opposed to five, and removes the redundancy of four.

Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant I2C EEPROM address

Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it
represented (ARCTURUS), and since we don't include the I2C device type
identifier in EEPROM memory addresses, i.e. that high up in the device
abstraction--we only use EEPROM memory addresses, as memory is continuously
represented by EEPROM device(s) on the I2C bus.

Add a comment describing what these memory addresses are, how they come
about and how they're usually extracted from the device address byte.

Cc: Candice Li <candice.li@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Fixes: c9bdc6c3cf39df ("drm/amdgpu: Add EEPROM I2C address support for ip discovery")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Make kfd_fill_cache_non_crat_info() as static

kfd_fill_cache_non_crat_info() is only used in kfd_topology.c,
so make it as static.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable mode1 reset on smu_v13_0_10

enable mode1 reset and prioritize debug port on smu_v13_0_10
as a more reliable message processing

v2 - move mode1 reset callback to smu_v13_0_0_ppt.c

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix the memory overrun

Fix the memory overrun issue caused by wrong array size.

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1527133 ("Memory - corruptions")
Fixes: c0cc999f3c32e6 ("drm/amdkfd: Fix the warning of array-index-out-of-bounds")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: disable BACO on special BEIGE_GOBY card

Still avoid intermittent failure.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Drop eviction lock when allocating PT BO

Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.

Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Unlock bo_list_mutex after error handling

Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.

If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.

Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.

 WARNING: kfdtest/2930 still has locks held!
 1 lock held by kfdtest/2930:
  (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
  stack backtrace:
   dump_stack_lvl+0x44/0x57
   get_signal+0x79f/0xd00
   arch_do_signal_or_restart+0x36/0x7b0
   exit_to_user_mode_prepare+0xfd/0x1b0
   syscall_exit_to_user_mode+0x19/0x40
   do_syscall_64+0x40/0x80

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.211

DC version 3.2.211 brings along the following fixes:

- Wait for VBLANK during pipe programming
- Adding HDMI SCDC DEVICE_ID define
- Cursor update refactor: PSR-SU support condition
- Update 709 gamma to 2.222 as stated in the standerd
- Consider dp cable id only when data is non zero
- Waiting for 1 frame to fix the flash issue on PSR1
- Update SR watermarks for DCN314
- Allow tuning DCN314 bounding box
- Zeromem mypipe heap struct before using it
- Use min transition for SubVP into MPO
- Disable phantom OTG after enable for plane disable
- Disable DRR actions during state commit
- Fix fallback issues for DP LL 1.4a tests
- Fix FCLK deviation and tool compile issues
- Fix reg timeout in enc314_enable_fifo
- Fix gpio port mapping issue
- Only update link settings after successful MST link train
- Enforce minimum prefetch time for low memclk on DCN32
- Set correct EOTF and Gamut flag in VRR info
- Add margin for max vblank time for SubVP + DRR
- Populate DP2.0 output type for DML pipe

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""

This reverts commit 4545ae2ed3f2f7c3f615a53399c9c8460ee5bca7.

The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine.
Test failure is caused by test case self.

Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix the kerneldoc description

amdgpu_ttm_tt_set_userptr() is also called by the KFD as part of
initializing the user pages for userptr BOs and also while initializing
the GPUVM for a KFD process so update the function description.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Populate DP2.0 output type for DML pipe

[Why]
DCN3.2 DML logic uses a new output type for DP2.0,
which will enable validation to pass for higher BW
timings that require DP2.0 link rates.

[How]
Populate the DML pipe with DP2.0 output type if
the signal type of the pipe_ctx is 128b/132b.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add margin for max vblank time for SubVP + DRR

[Description]
- Incorporate FW delays as port of max VTOTAL calculated for
  SubVP + DRR cases (since it is part of the microschedule).
- Also add margin for the max VTOTAL possible for SubVP + DRR cases.
- Due to rounding errors in FW (integer arithmetic), the microschedule
  calculation can get pushed to the next frame (incorrectly) in cases
  where we use the max VTOTAL possible to complete the MCLK switch.
- When the rounding error occurs, we are only off by 1-2 lines,
  use 40us margin which is working consistently.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set correct EOTF and Gamut flag in VRR info

[Why] FreeSync always use G2.2 EOTF and Native gamut
[How] Set EOTF and Gamut flags accordingly

Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Mike Hsieh <Mike.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32

[WHY?]
Data return times when using lowest memclk can be <= 60us, which can cause
underflow on high bandwidth displays with a workload.

[HOW?]
Enforce a minimum prefetch time during validation for low memclk modes.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only update link settings after successful MST link train

[WHY]
Currently driver reduces verified link caps on DPIA devices if a link is
trained at a link rate below the max rate verified during link detection.
This blocks high bandwidth modes after setting a low bandwidth mode.

[HOW]
Only update link rate after a successful link train if link is MST.

Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix gpio port mapping issue

[Why]
1. Port of gpio has different mapping.

[How]
1. Add a dummy entry in mapping table.
2. Fix incorrect mask bit field access.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Steve Su <steve.su@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix reg timeout in enc314_enable_fifo

[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.

This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.

This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.

[How]
Don't wait for the symclk to be on here because firmware already does.

Don't wait for reset if we know the symclk isn't on.

Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.

Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix FCLK deviation and tool compile issues

[Why]
Recent backports from open source do not have header inclusion pattern
that is consistent with inclusion style in the rest of the file. This
breaks the internal tool builds as well. A recent commit erronously
modified the original DML formula for calculating
ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation
from the golden values.

[How]
Change the way in which display_mode_vba.h is included so that it is
consistent with the inclusion style in rest of the file which also fixes
the tool build. Restore the DML formula to its original state to fix the
FCLK deviation.

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix fallback issues for DP LL 1.4a tests

[WHY]
Unlike DP or USBC, the USB4 link does not get its own encoder and
has to share therefore verify_caps is skipped.

[HOW]
Fix the fallback logic for automated tests and take that
into consideration for LT and LS.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable DRR actions during state commit

[WHY]
Committing a state while performing DRR actions can cause underflow.

[HOW]
Disabled features performing DRR actions during state commit.
Need to follow-up on why DRR actions affect state commit.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Disable phantom OTG after enable for plane disable

[Description]
- Need to disable phantom OTG after it's enabled
  in order to restore it to it's original state.
- If it's enabled and then an MCLK switch comes in
  we may not prefetch the correct data since the phantom
  OTG could already be in the middle of the frame.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use min transition for SubVP into MPO

[Description]
- For SubVP transitioning into MPO, we want to
  use a minimal transition to prevent transient
  underflow
- Transitioning a phantom pipe directly into a
  "real" pipe can result in underflow due to the
  HUBP still having it's "phantom" programming
  when HUBP is unblanked (have to wait for next
  VUPDATE of the new OTG)
- Also ensure subvp pipe lock is acquired early
  enough for programming in dc_commit_state_no_check
- When disabling phantom planes, enable phantom OTG
  first so the disable gets the double buffer update

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Zeromem mypipe heap struct before using it

[Why&How]
Bug was caused when moving variable from stack to heap because it was reusable
and garbage was left over, so we need to zero mem.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allow tuning DCN314 bounding box

[Why]
We're missing the helpers from dcn20 that would allow
overriding these with DC debug options.

[How]
Use dcn20_patch_bounding_box to support overriding all the
relevant values.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update SR watermarks for DCN314

[Why & How]
New values requested by hardware after fine-tuning.
Update for all memory types.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Waiting for 1 frame to fix the flash issue on PSR1

[Why]
Needs more frames waiting before the PSR_Exit sending for the specific
TCON.

[How]
Add relock_delay_frame_cnt to control how many frames waiting are needed
before the PSR_Exit sending. The default value is 0. The Driver side can
set this variable for specific TCONs.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Consider dp cable id only when data is non zero

Cable ID is a DP2 feature to identify max certified link rate that
a cable can carry. The cable identification method requires both
cable and display hardware support. Since the specs comes late, it is
anticipated that the first round of DP2 cables and displays may not
be fully compatible to reliably return cable ID data. Therefore the
decision of our cable id policy is that if the cable can return non
zero cable id data, we will take cable's link rate capability into
account. However if we get zero data, the cable link rate capability
is considered inconclusive. In this case, we will not take cable's
capability into account to avoid of over limiting hardware capability
from users. The max overall link rate capability is still determined
after actual dp pre-training. Cable id is considered as an auxiliary
method of determining max link bandwidth capability.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update 709 gamma to 2.222 as stated in the standerd

[WHY]
    Previously driver use gamma 2.2 for 709 color space,
    but the standard is to use gamma of 2.222

[HOW]
    Change it gamma to 2.222

Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nawwar Ali <nawwar.ali@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Cursor update refactor: PSR-SU support condition

[Why]
PSR-SU requires extra conditions while cursor update.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Max Tseng <Max.Tseng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding HDMI SCDC DEVICE_ID define

[Why && How]
We will need to differentiate vendor behavior in the future.

Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Wait for VBLANK during pipe programming

[Description]
- Wait for vblank during front end programming
  for global sync to ensure all double buffer
  updates take.
- This prevents underflow in some cases.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: workaround for TLB seq race

It can happen that we query the sequence value before the callback
had a chance to run.

Workaround that by grabbing the fence lock and releasing it again.
Should be replaced by hw handling soon.

Signed-off-by: Christian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org # 5.19+
Fixes: 5255e146c99a6 ("drm/amdgpu: rework TLB flushing")
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Stefan Springer <stefanspr94@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix error handling in criu_checkpoint

Checkpoint BOs last. That way we don't need to close dmabuf FDs if
something else fails later. This avoids problematic access to user mode
memory in the error handling code path.

criu_checkpoint_bos has its own error handling and cleanup that does not
depend on access to user memory.

In the private data, keep BOs before the remaining objects. This is
necessary to restore things in the correct order as restoring events
depends on the events-page BO being restored first.

Fixes: be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Reported-by: Jann Horn <jannh@google.com>
CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix error handling in kfd_criu_restore_events

mutex_unlock before the exit label because all the error code paths that
jump there didn't take that lock. This fixes unbalanced locking errors
in case of restore errors.

Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update SMU IP v13.0.4 msg interface header

Some of the unused messages that were used earlier in development have
been freed up as spare messages, no intended functional changes.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch '00.06-gr-ampere' of https://gitlab.freedesktop.org/skeggsb/nouveau into drm-next

This is the pull request for a whole bunch of fixes and prep-work that
was done to support Ampere acceleration prior to GSP-RM being
available.  It uses the ACR firmware released by NVIDIA in
linux-firmware, as we do on earlier GPUs.  The work to support running
on top of GSP-RM also heavily depends on various pieces of this
series.

In addition to the new HW support, general stability of the driver
should be improved, especially around recovering HW from bugs that can
be generated by userspace driver components.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==s+nZD0n7CuRWLPE=Pj+02CN13r+ZQJxoHQ_EmR+o=XQ@mail.gmail.com

drm/nouveau/gr/ga102: initial support

v2:
- whitespace

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/ltc/ga102: initial support

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/acr/ga102: initial support

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/fb/ga102: load and boot VPR scrubber FW

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gourav Samaiya <gsamaiya@nvidia.com>

drm/nouveau/gr/tu102: remove gv100_grctx_unkn88c

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/tu102: add gv100_gr_init_4188a4

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/tu102-: fix support for sw_bundle64_init

We weren't sending the high bits, though they're zero currently anyway.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/tu102-: use sw_veid_bundle_init from firmware

NVIDIA provided this on Turing, but we kept using the hardcoded version
from Volta (where they didn't).

Switch to the firmware version prior to Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: drop a write from init_shader_exceptions()

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: move init_419bd8() after sw_ctx load

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: add NV_PGRAPH_PRI_PD_AB_DIST_CONFIG_1 to patch list

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: fix number of tile map registers

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gv100-: port smid mapping code from nvgpu

Essentially ripped verbatim from NVGPU, comments and all, and adapted to
nvkm's structs and style.

- maybe fixes an nvgpu bug though, a small tweak was needed to match RM

v2:
- remove unnecessary WARN_ON

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gp100-: modify init_fecs_exceptions

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gk20a,gm20b,gp10b: split out netlist parsing from fw loading

We'll want to reuse the former for loading from proper netlist images.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gp100-: fix number of zcull tile regs

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf117-: make ppc_nr[gpc] accurate

We're going to be pulling in a chunk of code from NVGPU to fixup our
SMID mappings on Volta and above, which depends on ppc_nr[gpc]
reflecting the actual number of PPCs present, not the maximum number.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: switch to newer style interrupt handler

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move some init to init_exception2()

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move some init to init_rop_exceptions()

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move reset during golden ctx init to fecs_reset()

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: wfi after register-bashing golden init

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: gpfifo_ctl zero before init

Match RM.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: wait for FE_PWR_MODE_AUTO

This doesn't fix any known issue, but RM started doing it at some point,
so presumably it's needed for something.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: call FECS HALT_PIPE method before RC reset

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: call FECS WFI_GOLDEN_SAVE method

This won't work on Ampere, and, it's questionable whether we should have
been using our FW's method of storing the golden context image with NV's
firmware to begin with.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: stop using NV_PGRAPH_FECS_CTXSW_MAILBOX_CLEAR

This doesn't work on Ampere for some reason, switch to directly modifying
NV_PGRAPH_FECS_CTXSW_MAILBOX instead.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: make global attrib_cb actually global

This was thought to be per-channel initially - it's not.  The backing
pages for the VMM mappings are shared for all channels.

- switches to more straight-forward patch interfaces
- prepares for sub-context support
- this is saving a *sizeable* amount of vram

v2:
- whitespace

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move misc context patching out of attrib_cb funcs

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: make global bundle_cb actually global

This was thought to be per-channel initially - it's not.  The backing
pages for the VMM mappings are shared for all channels.

- switches to more straight-forward patch interfaces
- prepares for sub-context support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: make global pagepool actually global

This was thought to be per-channel initially - it's not.  The backing
pages for the VMM mappings are shared for all channels.

- switches to more straight-forward patch interfaces
- prepares for sub-context support

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: generate golden context during first object alloc

Needed for GV100 (and only GV100 for some reason) for WFI_GOLDEN_SAVE.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gr/gf100-: move some code around to make next commits nicer

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: expose function to read engine ctxsw status

Needed to support Ampere differences in gr/gf100-:

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/ltc: split color vs depth/stencil zbc counts

These differ on Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/engine: add HAL for engine-specific rc reset procedure

Will be used to improve gr reset on GF100 and newer.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/sec2: dump tracepc info on halt

- useful to distinguish between different issues.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/acr: use common falcon HS FW code for ACR FWs

Adds context binding and support for FWs with a bootloader to the code
that was added to load VPR scrubber HS binaries, and ports ACR over to
using all of it.

- gv100 split from gp108 to handle FW exit status differences

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb/gp102-: unlock VPR right after devinit

Under memory load, instmem allocations could end up in the regions of
VRAM that are inaccessible right after boot, and be corrupted after a
suspend/resume cycle as a result of being restored before booting the
mem unlock firmware.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fb: handle sysmem flush page from common code

- also executes pre-DEVINIT, so early boot is able to DMA sysmem

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: new code to load+boot simple HS FWs (VPR scrubber)

Adds the start of common interfaces to load and boot the HS binaries
provided by NVIDIA that enable the usage of GR.

ACR already handles most of this, but it's very much tied into ACR's
init process, and there's other code that could benefit from reusing
a lot of this stuff too (ie. VBIOS DEVINIT/PreOS, VPR scrubber).

The VPR scrubber code is fairly independent, and a good first target.

- adds better debug output to fw loading process, to ease bring-up/debug

v2:
- whitespace, 0->false

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/flcn: rework falcon reset

Mostly preparation to fit in Ampere changes, but should result in reset
sequences a lot closer to RM's, and perhaps help out with the issues we
sometimes see reported in this area.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/sec2: switch to newer style interrupt handler

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/sec2: unload RTOS before tearing down WPR

Reset regs won't be available on Ampere while SEC2 RTOS is running, and
we're apparently supposed to be doing this on earlier GPUs too.

v2:
- fixed some excessive indentation

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu/gm20b,gp10b: boot RTOS from PMU init

Cleanup before falcon changes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu: move init() falcon reset to non-nvfw code

Cleanup before falcon changes.

- fixes (attempt at?) reset of pmu while rtos is running, on gm20b

v2:
- remove extra whitespace

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/pmu: move preinit() falcon reset to devinit

Cleanup before falcon changes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/gsp: add funcs

Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo/ga100-: initial support

- replaces the hacked-up version that existed solely to support TTM

v2. remove earlier hack preventing use of non-stall intr for fences

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/ce/ga100-: initial support

- replaces the hacked-up version that existed solely to support TTM
- noop until the next commit, adding proper support for ampere host

v2. fixup for ga103 early merge

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

drm/nouveau/fifo: add new channel classes

Exposes a bunch of the new features that became possible as a result
of the earlier commits.  DRM will build on this in the future to add
support for features such as SCG ("async compute") and multi-device
rendering, as part of the work necessary to be able to write a half-
decent vulkan driver - finally.

For the moment, this just crudely ports DRM to the API changes.

- channel class interfaces now the same for all HW classes
- channel group class exposed (SCG)
- channel runqueue selector exposed (SCG)
- channel sub-device id control exposed (multi-device rendering)
- channel names in logging will reflect creating process, not fd owner
- explicit USERD allocation required by VOLTA_CHANNEL_GPFIFO_A and newer
- drm is smarter about determining the appropriate channel class to use

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new engine object handling

Simplifies the GPU-specific code, completing the switch to newer HALs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add new engine context handling

Builds on the context tracking that was added earlier.

- marks engine context PTEs as 'priv' where possible

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add RAMFC info to nvkm_chan_func

- adds support for specifying SUBDEVICE_ID for channel
- rounds non-power-of-two GPFIFO sizes down, rather than up

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add USERD info to nvkm_chan_func

And use it to cleanup multiple implementations of almost the same thing.

- prepares for non-polled / client-provided USERD
- only zeroes relevant "registers", rather than entire USERD

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add RAMIN info to nvkm_chan_func

Currently provided by {chan,dma,gpfifo}*.c, and those are going away.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add common runlist control

- less dependence on waiting for runlist updates, on GPUs that allow it
- supports runqueue selector in RAMRL entries
- completes switch to common runl/cgrp/chan topology info

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: add common channel recovery

That sure was fun to untangle.

- handled per-runlist, rather than globally
- more straight-forward process in general
- various potential SW/HW races have been fixed
- fixes lockdep issues that were present in >=gk104's prior implementation
- volta recovery now actually stands a chance of working
- volta/turing waiting for PBDMA idle before engine reset
- turing using hw-provided TSG info for CTXSW_TIMEOUT

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>

drm/nouveau/fifo: kill channel on NV_PPBDMA_INTR_1_CTXNOTVALID

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>