fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()

[ Upstream commit 07c55c9803dea748d17a054000cbf1913ce06399 ]

Add missing pci_disable_device() in error path in chipsfb_pci_init().

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fbcon: Destroy mutex on freeing struct fb_info

[ Upstream commit 58559dfc1ebba2ae0c7627dc8f8991ae1984c6e3 ]

It's needed to destroy bl_curve_mutex on freeing struct fb_info since
the mutex is embedded in the structure and initialized when it's
allocated.

Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Flush workqueue md_rdev_misc_wq in md_alloc()

[ Upstream commit 5e8daf906f890560df430d30617c692a794acb73 ]

A race condition still exists when removing and re-creating md devices
in test cases. However, it is only seen on some setups.

The race condition was tracked down to a reference still being held
to the kobject by the rdev in the md_rdev_misc_wq which will be released
in rdev_delayed_delete().

md_alloc() waits for previous deletions by waiting on the md_misc_wq,
but the md_rdev_misc_wq may still be holding a reference to a recently
removed device.

To fix this, also flush the md_rdev_misc_wq in md_alloc().

Signed-off-by: David Sloan <david.sloan@eideticom.com>
[logang@deltatee.com: rewrote commit message]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/core/skbuff: Check the return value of skb_copy_bits()

[ Upstream commit c624c58e08b15105662b9ab9be23d14a6b945a49 ]

skb_copy_bits() could fail, which requires a check on the return
value.

Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: check only freq_table in __resolve_freq()

[ Upstream commit 6ca7076fbfaeccce173aeab832d76b9e49e1034b ]

There is no need to check if the cpufreq driver implements callback
cpufreq_driver::target_index. The logic in the __resolve_freq uses
the frequency table available in the policy. It doesn't matter if the
driver provides 'target_index' or 'target' callback. It just has to
populate the 'policy->freq_table'.

Thus, check only frequency table during the frequency resolving call.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: conntrack: work around exceeded receive window

[ Upstream commit cf97769c761abfeac8931b35fe0e1a8d5fabc9d8 ]

When a TCP sends more bytes than allowed by the receive window, all future
packets can be marked as invalid.
This can clog up the conntrack table because of 5-day default timeout.

Sequence of packets:
 01 initiator > responder: [S], seq 171, win 5840, options [mss 1330,sackOK,TS val 63 ecr 0,nop,wscale 1]
 02 responder > initiator: [S.], seq 33211, ack 172, win 65535, options [mss 1460,sackOK,TS val 010 ecr 63,nop,wscale 8]
 03 initiator > responder: [.], ack 33212, win 2920, options [nop,nop,TS val 068 ecr 010], length 0
 04 initiator > responder: [P.], seq 172:240, ack 33212, win 2920, options [nop,nop,TS val 279 ecr 010], length 68

Window is 5840 starting from 33212 -> 39052.

 05 responder > initiator: [.], ack 240, win 256, options [nop,nop,TS val 872 ecr 279], length 0
 06 responder > initiator: [.], seq 33212:34530, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318

This is fine, conntrack will flag the connection as having outstanding
data (UNACKED), which lowers the conntrack timeout to 300s.

 07 responder > initiator: [.], seq 34530:35848, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
 08 responder > initiator: [.], seq 35848:37166, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
 09 responder > initiator: [.], seq 37166:38484, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318
 10 responder > initiator: [.], seq 38484:39802, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 1318

Packet 10 is already sending more than permitted, but conntrack doesn't
validate this (only seq is tested vs. maxend, not 'seq+len').

38484 is acceptable, but only up to 39052, so this packet should
not have been sent (or only 568 bytes, not 1318).

At this point, connection is still in '300s' mode.

Next packet however will get flagged:
 11 responder > initiator: [P.], seq 39802:40128, ack 240, win 256, options [nop,nop,TS val 892 ecr 279], length 326

nf_ct_proto_6: SEQ is over the upper bound (over the window of the receiver) .. LEN=378 .. SEQ=39802 ACK=240 ACK PSH ..

Now, a couple of replies/acks comes in:

 12 initiator > responder: [.], ack 34530, win 4368,
[.. irrelevant acks removed ]
 16 initiator > responder: [.], ack 39802, win 8712, options [nop,nop,TS val 296201291 ecr 2982371892], length 0

This ack is significant -- this acks the last packet send by the
responder that conntrack considered valid.

This means that ack == td_end.  This will withdraw the
'unacked data' flag, the connection moves back to the 5-day timeout
of established conntracks.

 17 initiator > responder: ack 40128, win 10030, ...

This packet is also flagged as invalid.

Because conntrack only updates state based on packets that are
considered valid, packet 11 'did not exist' and that gets us:

nf_ct_proto_6: ACK is over upper bound 39803 (ACKed data not seen yet) .. SEQ=240 ACK=40128 WINDOW=10030 RES=0x00 ACK URG

Because this received and processed by the endpoints, the conntrack entry
remains in a bad state, no packets will ever be considered valid again:

 30 responder > initiator: [F.], seq 40432, ack 2045, win 391, ..
 31 initiator > responder: [.], ack 40433, win 11348, ..
 32 initiator > responder: [F.], seq 2045, ack 40433, win 11348 ..

... all trigger 'ACK is over bound' test and we end up with
non-early-evictable 5-day default timeout.

NB: This patch triggers a bunch of checkpatch warnings because of silly
indent.  I will resend the cleanup series linked below to reduce the
indent level once this change has propagated to net-next.

I could route the cleanup via nf but that causes extra backport work for
stable maintainers.

Link: https://lore.kernel.org/netfilter-devel/20220720175228.17880-1-fw@strlen.de/T/#mb1d7147d36294573cc4f81d00f9f8dadfdd06cd8
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: cacheinfo: Fix incorrect assignment of signed error value to unsigned fw_level

[ Upstream commit e75d18cecbb3805895d8ed64da4f78575ec96043 ]

Though acpi_find_last_cache_level() always returned signed value and the
document states it will return any errors caused by lack of a PPTT table,
it never returned negative values before.

Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
however changed it by returning -ENOENT if no PPTT was found. The value
returned from acpi_find_last_cache_level() is then assigned to unsigned
fw_level.

It will result in the number of cache leaves calculated incorrectly as
a huge value which will then cause the following warning from __alloc_pages
as the order would be great than MAX_ORDER because of incorrect and huge
cache leaves value.

  |  WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314
  |  Modules linked in:
  |  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73
  |  pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  |  pc : __alloc_pages+0x74/0x314
  |  lr : alloc_pages+0xe8/0x318
  |  Call trace:
  |   __alloc_pages+0x74/0x314
  |   alloc_pages+0xe8/0x318
  |   kmalloc_order_trace+0x68/0x1dc
  |   __kmalloc+0x240/0x338
  |   detect_cache_attributes+0xe0/0x56c
  |   update_siblings_masks+0x38/0x284
  |   store_cpu_topology+0x78/0x84
  |   smp_prepare_cpus+0x48/0x134
  |   kernel_init_freeable+0xc4/0x14c
  |   kernel_init+0x2c/0x1b4
  |   ret_from_fork+0x10/0x20

Fix the same by changing fw_level to be signed integer and return the
error from init_cache_level() early in case of error.

Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines

[ Upstream commit 591d2108f3abc4db9f9073cae37cf3591fd250d6 ]

If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

parisc: ccio-dma: Handle kmalloc failure in ccio_init_resources()

[ Upstream commit d46c742f827fa2326ab1f4faa1cccadb56912341 ]

As the possible failure of the kmalloc(), it should be better
to fix this error path, check and return '-ENOMEM' error code.

Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "parisc: Show error if wrong 32/64-bit compiler is being used"

[ Upstream commit b4b18f47f4f9682fbf5827682645da7c8dde8f80 ]

This reverts commit b160628e9ebcdc85d0db9d7f423c26b3c7c179d0.

There is no need any longer to have this sanity check, because the
previous commit ("parisc: Make CONFIG_64BIT available for ARCH=parisc64
only") prevents that CONFIG_64BIT is set if ARCH==parisc.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Reduce the power mode change timeout

[ Upstream commit 8f2c96420c6ec3dcb18c8be923e24c6feaa5ccf6 ]

The current power mode change timeout (180 s) is so large that it can cause
a watchdog timer to fire. Reduce the power mode change timeout to 10
seconds.

Link: https://lore.kernel.org/r/20220811234401.1957911-1-bvanassche@acm.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: add a force flush to delay work when radeon

[ Upstream commit f461950fdc374a3ada5a63c669d997de4600dffe ]

Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>]  ra = [<ffffffff81240844>]  ps = 0000 Tainted: G        W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000  t0 = fff08800e0008010  t1 = 0000000000010000
t2 = 0000000000008010  t3 = fff00007e3c00000  t4 = fff00007e3c00258
t5 = 000000000000ffff  t6 = 0000000000000001  t7 = fff00007ef078000
s0 = fff00007e3c016e8  s1 = fff00007e3c00000  s2 = fff00007e3c00018
s3 = fff00007e3c00000  s4 = fff00007fff59d80  s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000  a1 = fff00007e3c016e8  a2 = 0000000000000008
a3 = 0000000000000001  a4 = 8f5c28f5c28f5c29  a5 = ffffffff810f4338
t8 = 0000000000000275  t9 = ffffffff809b66f8  t10 = ff6769c5d964b800
t11= 000000000000b886  pv = ffffffff811bea20  at = 0000000000000000
gp = ffffffff81d89690  sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
 Code: ad3e0008  43f0074a  ad7e0018  ad9e0020  8c3001e8  40230101
 <88210000> 4821ed21
So force lockup work queue flush to fix this problem.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.

[ Upstream commit c351938350ab9b5e978dede2c321da43de7eb70c ]

No need to set up rb when no gfx rings.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini

[ Upstream commit 9d705d7741ae70764f3d6d87e67fad3b5c30ffd0 ]

V1:
The amdgpu_xgmi_remove_device function will send unload command
to psp through psp ring to terminate xgmi, but psp ring has been
destroyed in psp_hw_fini.

V2:
1. Change the commit title.
2. Restore amdgpu_xgmi_remove_device to its original calling location.
   Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to
   psp_hw_fini.

Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/gem: Fix GEM handle release errors

[ Upstream commit ea2aa97ca37a9044ade001aef71dbc06318e8d44 ]

Currently we are assuming a one to one mapping between dmabuf and
GEM handle when releasing GEM handles.

But that is not always true, since we would create extra handles for the
GEM obj in cases like gem_open() and getfb{,2}().

A similar issue was reported at:
https://lore.kernel.org/all/20211105083308.392156-1-jay.xu@rock-chips.com/

Another problem is that the imported dmabuf might not always have
gem_obj->dma_buf set, which would cause leaks in
drm_gem_remove_prime_handles().

Let's fix these for now by using handle to find the exact map to remove.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220819072834.17888-1-jeffy.chen@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: megaraid_sas: Fix double kfree()

[ Upstream commit 8c499e49240bd93628368c3588975cfb94169b8b ]

When allocating log_to_span fails, kfree(instance->ctrl_context) is called
twice. Remove redundant call.

Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX

[ Upstream commit 53661ded2460b414644532de6b99bd87f71987e9 ]

This partially reverts commit d2b292c3f6fd ("scsi: qla2xxx: Enable ATIO
interrupt handshake for ISP27XX")

For some workloads where the host sends a batch of commands and then
pauses, ATIO interrupt coalesce can cause some incoming ATIO entries to be
ignored for extended periods of time, resulting in slow performance,
timeouts, and aborted commands.

Disable interrupt coalesce and re-enable the dedicated ATIO MSI-X
interrupt.

Link: https://lore.kernel.org/r/97dcf365-89ff-014d-a3e5-1404c6af511c@cybernetics.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "mm: kmemleak: take a full lowmem check in kmemleak_*_phys()"

This reverts commit 23c2d497de21f25898fbea70aeb292ab8acc8c94.

Commit 23c2d497de21 ("mm: kmemleak: take a full lowmem check in
kmemleak_*_phys()") brought false leak alarms on some archs like arm64
that does not init pfn boundary in early booting. The final solution
lands on linux-6.0: commit 0c24e061196c ("mm: kmemleak: add rbtree and
store physical address for objects allocated with PA").

Revert this commit before linux-6.0. The original issue of invalid PA
can be mitigated by additional check in devicetree.

The false alarm report is as following: Kmemleak output: (Qemu/arm64)
unreferenced object 0xffff0000c0170a00 (size 128):
  comm "swapper/0", pid 1, jiffies 4294892404 (age 126.208s)
  hex dump (first 32 bytes):
 62 61 73 65 00 00 00 00 00 00 00 00 00 00 00 00  base............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<(____ptrval____)>] __kmalloc_track_caller+0x1b0/0x2e4
    [<(____ptrval____)>] kstrdup_const+0x8c/0xc4
    [<(____ptrval____)>] kvasprintf_const+0xbc/0xec
    [<(____ptrval____)>] kobject_set_name_vargs+0x58/0xe4
    [<(____ptrval____)>] kobject_add+0x84/0x100
    [<(____ptrval____)>] __of_attach_node_sysfs+0x78/0xec
    [<(____ptrval____)>] of_core_init+0x68/0x104
    [<(____ptrval____)>] driver_init+0x28/0x48
    [<(____ptrval____)>] do_basic_setup+0x14/0x28
    [<(____ptrval____)>] kernel_init_freeable+0x110/0x178
    [<(____ptrval____)>] kernel_init+0x20/0x1a0
    [<(____ptrval____)>] ret_from_fork+0x10/0x20

This pacth is also applicable to linux-5.17.y/linux-5.18.y/linux-5.19.y

Cc: <stable@vger.kernel.org>
Signed-off-by: Yee Lee <yee.lee@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: only do a memory barrier for the first set_buffer_uptodate()

commit 2f79cdfe58c13949bbbb65ba5926abfe9561d0ec upstream.

Commit d4252071b97d ("add barriers to buffer_uptodate and
set_buffer_uptodate") added proper memory barriers to the buffer head
BH_Uptodate bit, so that anybody who tests a buffer for being up-to-date
will be guaranteed to actually see initialized state.

However, that commit didn't _just_ add the memory barrier, it also ended
up dropping the "was it already set" logic that the BUFFER_FNS() macro
had.

That's conceptually the right thing for a generic "this is a memory
barrier" operation, but in the case of the buffer contents, we really
only care about the memory barrier for the _first_ time we set the bit,
in that the only memory ordering protection we need is to avoid anybody
seeing uninitialized memory contents.

Any other access ordering wouldn't be about the BH_Uptodate bit anyway,
and would require some other proper lock (typically BH_Lock or the folio
lock).  A reader that races with somebody invalidating the buffer head
isn't an issue wrt the memory ordering, it's a serialization issue.

Now, you'd think that the buffer head operations don't matter in this
day and age (and I certainly thought so), but apparently some loads
still end up being heavy users of buffer heads.  In particular, the
kernel test robot reported that not having this bit access optimization
in place caused a noticeable direct IO performance regression on ext4:

  fxmark.ssd_ext4_no_jnl_DWTL_54_directio.works/sec -26.5% regression

although you presumably need a fast disk and a lot of cores to actually
notice.

Link: https://lore.kernel.org/all/Yw8L7HTZ%2FdE2%2Fo9C@xsang-OptiPlex-9020/
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Fengwei Yin <fengwei.yin@intel.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_cmd()

commit 6d0ef7241553f3553a0a2764c69b07892705924c upstream.

This reverts commit a8eb8e6f7159c7c20c0ddac428bde3d110890aa7 as
it can cause invalid link quality command sent to the firmware
and address the off-by-one issue by fixing condition of while loop.

Cc: stable@vger.kernel.org
Fixes: a8eb8e6f7159 ("wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220815073737.GA999388@wp.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: capsule-loader: Fix use-after-free in efi_capsule_write

commit 9cb636b5f6a8cc6d1b50809ec8f8d33ae0c84c95 upstream.

A race condition may occur if the user calls close() on another thread
during a write() operation on the device node of the efi capsule.

This is a race condition that occurs between the efi_capsule_write() and
efi_capsule_flush() functions of efi_capsule_fops, which ultimately
results in UAF.

So, the page freeing process is modified to be done in
efi_capsule_release() instead of efi_capsule_flush().

Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/20220907102920.GA88602@ubuntu/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efi: libstub: Disable struct randomization

commit 1a3887924a7e6edd331be76da7bf4c1e8eab4b1e upstream.

The EFI stub is a wrapper around the core kernel that makes it look like
a EFI compatible PE/COFF application to the EFI firmware. EFI
applications run on top of the EFI runtime, which is heavily based on
so-called protocols, which are struct types consisting [mostly] of
function pointer members that are instantiated and recorded in a
protocol database.

These structs look like the ideal randomization candidates to the
randstruct plugin (as they only carry function pointers), but of course,
these protocols are contracts between the firmware that exposes them,
and the EFI applications (including our stubbed kernel) that invoke
them. This means that struct randomization for EFI protocols is not a
great idea, and given that the stub shares very little data with the
core kernel that is represented as a randomizable struct, we're better
off just disabling it completely here.

Cc: <stable@vger.kernel.org> # v4.14+
Reported-by: Daniel Marth <daniel.marth@inso.tuwien.ac.at>
Tested-by: Daniel Marth <daniel.marth@inso.tuwien.ac.at>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: wwan: iosm: remove pointless null check

commit dbbc7d04c549a43ad343c69e17b27a57e2102041 upstream.

GCC 12 warns:

drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’:
drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress]
  406 |         if (!IPC_CB(skb)) {
      |             ^

Indeed the check seems entirely pointless. Hopefully the other
validation checks will catch if the cb is bad, but it can't be
NULL.

Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.67

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: fix up permissions on scripts/pahole-flags.sh

Commit b775fbf532dc ("kbuild: Add skip_encoding_btf_enum64 option to
pahole") created the file scripts/pahole-flags.sh, but due to a mismatch
between patch and quilt and git, the execute permissions did not get set
properly.  Fix that up.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Fixes: b775fbf532dc ("kbuild: Add skip_encoding_btf_enum64 option to pahole")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.15.66

Link: https://lore.kernel.org/r/20220906132821.713989422@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix disabled rx timer on older devices

commit 41ca302a697b64a3dab4676e01d0d11bb184737d upstream.

At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.

Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Cc: stable@vger.kernel.org # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ch341: fix lost character on LCR updates

commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream.

Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.

Note that updating LCR using the INIT command has no effect on these
devices either.

Reported-by: Jonathan Woithe <jwoithe@just42.net>
Tested-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au
Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration")
Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling")
Cc: stable@vger.kernel.org # 4.10
Signed-off-by: Johan Hovold <johan@kernel.org>
[ johan: adjust context to 5.15 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: disable USB core PHY management

commit 6000b8d900cd5f52fbcd0776d0cc396e88c8c2ea upstream.

The dwc3 driver manages its PHYs itself so the USB core PHY management
needs to be disabled.

Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb:
host: xhci-plat: add platform data support") and f768e718911e ("usb:
host: xhci-plat: add priv quirk for skip PHY initialization") to
propagate the setting for now.

Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd")
Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core")
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Cc: stable <stable@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: adjust context to 5.15 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup

commit  a872ab303d5ddd4c965f9cd868677781a33ce35a upstream.

The Qualcomm dwc3 runtime-PM implementation checks the xhci
platform-device pointer in the wakeup-interrupt handler to determine
whether the controller is in host mode and if so triggers a resume.

After a role switch in OTG mode the xhci platform-device would have been
freed and the next wakeup from runtime suspend would access the freed
memory.

Note that role switching is executed from a freezable workqueue, which
guarantees that the pointer is stable during suspend.

Also note that runtime PM has been broken since commit 2664deb09306
("usb: dwc3: qcom: Honor wakeup enabled/disabled state"), which
incidentally also prevents this issue from being triggered.

Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org # 4.18
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: adjust context for 5.15 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: fix PHY disable sequence

commit d2ac7bef95c9ead307801ccb6cb6dfbeb14247bf upstream.

Generic PHYs must be powered-off before they can be tore down.

Similarly, suspending legacy PHYs after having powered them off makes no
sense.

Fix the dwc3_core_exit() (e.g. called during suspend) and open-coded
dwc3_probe() error-path sequences that got this wrong.

Note that this makes dwc3_core_exit() match the dwc3_core_init() error
path with respect to powering off the PHYs.

Fixes: 03c1fd622f72 ("usb: dwc3: core: add phy cleanup for probe error handling")
Fixes: c499ff71ff2a ("usb: dwc3: core: re-factor init and exit paths")
Cc: stable@vger.kernel.org # 4.8
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220804151001.23612-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ johan: adjust context to 5.15 ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: Add skip_encoding_btf_enum64 option to pahole

New pahole (version 1.24) generates by default new BTF_KIND_ENUM64 BTF tag,
which is not supported by stable kernel.

As a result the kernel with CONFIG_DEBUG_INFO_BTF option will fail to
compile with following error:

  BTFIDS  vmlinux
FAILED: load BTF from vmlinux: Invalid argument

New pahole provides --skip_encoding_btf_enum64 option to skip BTF_KIND_ENUM64
generation and produce BTF supported by stable kernel.

Adding this option to scripts/pahole-flags.sh.

This change does not have equivalent commit in linus tree, because linus tree
has support for BTF_KIND_ENUM64 tag, so it does not need to be disabled.

Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: Unify options for BTF generation for vmlinux and modules

commit e27f05147bff21408c1b8410ad8e90cd286e7952 upstream.

Using new PAHOLE_FLAGS variable to pass extra arguments to
pahole for both vmlinux and modules BTF data generation.

Adding new scripts/pahole-flags.sh script that detect and
prints pahole options.

[ fixed issues found by kernel test robot ]

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211029125729.70002-1-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()

commit f16c6d2e58a4c2b972efcf9eb12390ee0ba3befb upstream.

A null pointer dereference can happen when attempting to access the
"gsm->receive()" function in gsmld_receive_buf(). Currently, the code
assumes that gsm->recieve is only called after MUX activation.
Since the gsmld_receive_buf() function can be accessed without the need to
initialize the MUX, the gsm->receive() function will not be set and a
NULL pointer dereference will occur.

Fix this by avoiding the call to "gsm->receive()" in case the function is
not initialized by adding a sanity check.

Call Trace:
 <TASK>
 gsmld_receive_buf+0x1c2/0x2f0 drivers/tty/n_gsm.c:2861
 tiocsti drivers/tty/tty_io.c:2293 [inline]
 tty_ioctl+0xa75/0x15d0 drivers/tty/tty_io.c:2692
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:870 [inline]
 __se_sys_ioctl fs/ioctl.c:856 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Link: https://syzkaller.appspot.com/bug?id=bdf035c61447f8c6e0e6920315d577cb5cc35ac5
Fixes: 01aecd917114 ("tty: n_gsm: fix tty registration before control channel open")
Cc: stable <stable@kernel.org>
Reported-and-tested-by: syzbot+e3563f0c94e188366dbb@syzkaller.appspotmail.com
Signed-off-by: Mazin Al Haddad <mazinalhaddad05@gmail.com>
Link: https://lore.kernel.org/r/20220814015211.84180-1-mazinalhaddad05@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Skip wm/ddb readout for disabled pipes

commit 0211c2a0ea600e25db3044daaeff4fe41c3ed6d9 upstream.

The stuff programmed into the wm/ddb registers of planes
on disabled pipes doesn't matter. So during readout just
leave our software state tracking for those zeroed.

This should avoid us trying too hard to clean up after
whatever mess the VBIOS/GOP left in there. The actual
hardware state will get cleaned up if/when we enable
the pipe anyway.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5711
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220617195948.24007-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b183db8f4783ca2efc9b47734f15aad9477a108a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing quirk

commit 919bef7a106ade2bda73681bbc2f3678198f44fc upstream.

The quirk added in upstream commit 90c3e2198777 ("drm/i915/glk: Add
Quirk for GLK NUC HDMI port issues.") is also required on the ECS Liva
Q2.

Note: Would be nicer to figure out the extra delay required for the
retimer without quirks, however don't know how to check for that.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1326
Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616124137.3184371-1-jani.nikula@intel.com
(cherry picked from commit 08e9505fa8f9aa00072a47b6f234d89b6b27a89c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix data-race at module auto-loading

commit 3e7e04b747adea36f349715d9f0998eeebf15d72 upstream.

It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.

This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: oss: Fix data-race for max_midi_devs access

commit 22dec134dbfa825b963f8a1807ad19b943e46a56 upstream.

ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field.  Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.

OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.

Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.

Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add speaker AMP init for Samsung laptops with ALC298

commit a2d57ebec1e15f0ac256eb8397e82b07adfaaacc upstream.

Magic initialization sequence was extracted from Windows driver and
cleaned up manually.

Fixes internal speakers output.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=207423
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1851518
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220827203328.30363-1-kasper93@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mac802154: Fix a condition in the receive path

commit f0da47118c7e93cdbbc6fb403dd729a5f2c90ee3 upstream.

Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
  consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
  coordinator, as for know we don't have this information we consider we
  are not the PAN coordinator.

There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.

Cc: stable@vger.kernel.org
Fixes: ae531b9475f6 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Use u64_stats_fetch_begin_irq() for stats fetch.

commit 278d3ba61563ceed3cb248383ced19e14ec7bc1f upstream.

On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the
reader is in preemptible context and the writer side
(u64_stats_update_begin*()) runs in an interrupt context (IRQ or
softirq) then the writer can update the stats during the read operation.
This update remains undetected.

Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP
are not interrupted by a writer. 32bit-SMP remains unaffected by this
change.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catherine Sullivan <csully@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Cc: Dimitris Michailidis <dmichail@fungible.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: oss-drivers@corigine.com
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip: fix triggering of 'icmp redirect'

commit eb55dc09b5dd040232d5de32812cc83001a23da6 upstream.

__mkroute_input() uses fib_validate_source() to trigger an icmp redirect.
My understanding is that fib_validate_source() is used to know if the src
address and the gateway address are on the same link. For that,
fib_validate_source() returns 1 (same link) or 0 (not the same network).
__mkroute_input() is the only user of these positive values, all other
callers only look if the returned value is negative.

Since the below patch, fib_validate_source() didn't return anymore 1 when
both addresses are on the same network, because the route lookup returns
RT_SCOPE_LINK instead of RT_SCOPE_HOST. But this is, in fact, right.
Let's adapat the test to return 1 again when both addresses are on the same
link.

CC: stable@vger.kernel.org
Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220829100121.3821-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: Fix UAF in ieee80211_scan_rx()

commit 60deb9f10eec5c6a20252ed36238b55d8b614a2c upstream.

ieee80211_scan_rx() tries to access scan_req->flags after a
null check, but a UAF is observed when the scan is completed
and __ieee80211_scan_completed() executes, which then calls
cfg80211_scan_done() leading to the freeing of scan_req.

Since scan_req is rcu_dereference()'d, prevent the racing in
__ieee80211_scan_completed() by ensuring that from mac80211's
POV it is no longer accessed from an RCU read critical section
before we call cfg80211_scan_done().

Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?extid=f9acff9bf08a845f225d
Reported-by: syzbot+f9acff9bf08a845f225d@syzkaller.appspotmail.com
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Link: https://lore.kernel.org/r/20220819200340.34826-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected

commit 15bc8966b6d3a5b9bfe4c9facfa02f2b69b1e5f0 upstream.

When we are not connected to a channel, sending channel "switch"
announcement doesn't make any sense.

The BSS list is empty in that case. This causes the for loop in
cfg80211_get_bss() to be bypassed, so the function returns NULL
(check line 1424 of net/wireless/scan.c), causing the WARN_ON()
in ieee80211_ibss_csa_beacon() to get triggered (check line 500
of net/mac80211/ibss.c), which was consequently reported on the
syzkaller dashboard.

Thus, check if we have an existing connection before generating
the CSA beacon in ieee80211_ibss_finish_csa().

Cc: stable@vger.kernel.org
Fixes: cd7760e62c2a ("mac80211: add support for CSA in IBSS mode")
Link: https://syzkaller.appspot.com/bug?id=05603ef4ae8926761b678d2939a3b2ad28ab9ca6
Reported-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Tested-by: syzbot+b6c9fe29aefe68e4ad34@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220814151512.9985-1-code@siddh.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Don't probe devices after bus_type.match() probe deferral

commit 25e9fbf0fd38868a429feabc38abebfc6dbf6542 upstream.

Both __device_attach_driver() and __driver_attach() check the return
code of the bus_type.match() function to see if the device needs to be
added to the deferred probe list. After adding the device to the list,
the logic attempts to bind the device to the driver anyway, as if the
device had matched with the driver, which is not correct.

If __device_attach_driver() detects that the device in question is not
ready to match with a driver on the bus, then it doesn't make sense for
the device to attempt to bind with the current driver or continue
attempting to match with any of the other drivers on the bus. So, update
the logic in __device_attach_driver() to reflect this.

If __driver_attach() detects that a driver tried to match with a device
that is not ready to match yet, then the driver should not attempt to bind
with the device. However, the driver can still attempt to match and bind
with other devices on the bus, as drivers can be bound to multiple
devices. So, update the logic in __driver_attach() to reflect this.

Fixes: 656b8035b0ee ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()")
Cc: stable@vger.kernel.org
Cc: Saravana Kannan <saravanak@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS

commit 9d4dc16ec71bd6368548e9743223e449b4377fc7 upstream.

During cdrom emulation, the response to read_toc command must contain
the cdrom address as the number of sectors (2048 byte sized blocks)
represented either as an absolute value (when MSF bit is '0') or in
terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of
cdrom, the fsg_lun_open call sets the sector size to 2048 bytes.

When MAC OS sends a read_toc request with MSF set to '1', the
store_cdrom_address assumes that the address being provided is the
LUN size represented in 512 byte sized blocks instead of 2048. It
tries to modify the address further to convert it to 2048 byte sized
blocks and store it in MSF format. This results in data transfer
failures as the cdrom address being provided in the read_toc response
is incorrect.

Fixes: 3f565a363cee ("usb: gadget: storage: adapt logic block size to bound block devices")
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: fix bandwidth release issue

commit 6020f480004a80cdad4ae5ee180a231c4f65595b upstream.

This happens when @udev->reset_resume is set to true, when usb resume,
the flow as below:
  - hub_resume
    - usb_disable_interface
      - usb_disable_endpoint
        - usb_hcd_disable_endpoint
          - xhci_endpoint_disable  // it set @ep->hcpriv to NULL

Then when reset usb device, it will drop allocated endpoints,
the flow as below:
  - usb_reset_and_verify_device
    - usb_hcd_alloc_bandwidth
      - xhci_mtk_drop_ep

but @ep->hcpriv is already set to NULL, the bandwidth will be not
released anymore.

Due to the added endponts are stored in hash table, we can drop the check
of @ep->hcpriv.

Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint")
Cc: stable <stable@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci-mtk: relax TT periodic bandwidth allocation

commit 8b13ea05117ffad4727b0971ed09122d5c91c4dc upstream.

Currently uses the worst case byte budgets on FS/LS bus bandwidth,
for example, for an isochronos IN endpoint with 192 bytes budget, it
will consume the whole 5 uframes(188 * 5) while the actual FS bus
budget should be just 192 bytes. It cause that many usb audio headsets
with 3 interfaces (audio input, audio output, and HID) cannot be
configured.
To improve it, changes to use "approximate" best case budget for FS/LS
bandwidth management. For the same endpoint from the above example,
the approximate best case budget is now reduced to (188 * 2) bytes.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819080556.32215-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: Prevent nested device-reset calls

commit 9c6d778800b921bde3bff3cff5003d1650f942d1 upstream.

Automatic kernel fuzzing revealed a recursive locking violation in
usb-storage:

============================================
WARNING: possible recursive locking detected
5.18.0 #3 Not tainted
--------------------------------------------
kworker/1:3/1205 is trying to acquire lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

but task is already holding lock:
ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at:
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230

...

stack backtrace:
CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2988 [inline]
check_deadlock kernel/locking/lockdep.c:3031 [inline]
validate_chain kernel/locking/lockdep.c:3816 [inline]
__lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053
lock_acquire kernel/locking/lockdep.c:5665 [inline]
lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630
__mutex_lock_common kernel/locking/mutex.c:603 [inline]
__mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747
usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230
usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109
r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622
usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458
device_remove drivers/base/dd.c:545 [inline]
device_remove+0x11f/0x170 drivers/base/dd.c:537
__device_release_driver drivers/base/dd.c:1222 [inline]
device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248
usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627
usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118
usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114

This turned out not to be an error in usb-storage but rather a nested
device reset attempt.  That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.

Performing a reset as part of disconnect processing is a questionable
practice at best.  However, the bug report points out that the USB
core does not have any protection against nested resets.  Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.

Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix nospec table alignments

commit c9305b6c1f52060377c72aebe3a701389e9f3172 upstream.

Add proper alignment for .nospec_call_table and .nospec_return_table in
vmlinux.

[hca@linux.ibm.com]: The problem with the missing alignment of the nospec
tables exist since a long time, however only since commit e6ed91fd0768
("s390/alternatives: remove padding generation code") and with
CONFIG_RELOCATABLE=n the kernel may also crash at boot time.

The above named commit reduced the size of struct alt_instr by one byte,
so its new size is 11 bytes. Therefore depending on the number of cpu
alternatives the size of the __alt_instructions array maybe odd, which
again also causes that the addresses of the nospec tables will be odd.

If the address of __nospec_call_start is odd and the kernel is compiled
With CONFIG_RELOCATABLE=n the compiler may generate code that loads the
address of __nospec_call_start with a 'larl' instruction.

This will generate incorrect code since the 'larl' instruction only works
with even addresses. In result the members of the nospec tables will be
accessed with an off-by-one offset, which subsequently may lead to
addressing exceptions within __nospec_revert().

Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org
Cc: <stable@vger.kernel.org> # 4.16
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages

commit 7c8d42fdf1a84b1a0dd60d6528309c8ec127e87c upstream.

The alignment check in prepare_hugepage_range() is wrong for 2 GB
hugepages, it only checks for 1 MB hugepage alignment.

This can result in kernel crash in __unmap_hugepage_range() at the
BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings
created with MAP_FIXED at unaligned address.

Fix this by correctly handling multiple hugepage sizes, similar to the
generic version of prepare_hugepage_range().

Fixes: d08de8e2d867 ("s390/mm: add support for 2GB hugepages")
Cc: <stable@vger.kernel.org> # 4.8+
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add ignore-residue quirk for NXP PN7462AU

commit 2aa48857ad52236a9564c71183d6cc8893becd41 upstream.

This is USB mass storage primary boot loader for code download on
NXP PN7462AU.

Without the quirk it is impossible to write whole memory at once as
device restarts during the write due to bogus residue values reported.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Witold Lipieta <witold.lipieta@thaumatec.com>
Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020)

commit a10bc71729b236fe36de0d8e4d35c959fd8dec3a upstream.

Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver
enabling the AT serial port.
The Vendor Id is 0x0C26
The Product ID is 0x0020

Output of lsusb :
Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x0c26 Prolific Technology Inc.
  idProduct          0x0020
  bcdDevice            0.00
  iManufacturer           1 ICOM Inc.
  iProduct                2 ICOM Radio
  iSerial                 3 *obfuscated*
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength       0x0030
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0

Signed-off-by: Thierry GUIBERT <thierry.guibert@croix-rouge.fr>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer

commit d5dcc33677d7415c5f23b3c052f9e80cbab9ea4e upstream.

The TRB_SMM flag indicates that DMA has completed the TD service with
this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for
bInterval > 1 each ISOC transfer contains more than one TD associated
with usb request (one TD per ITP). In such case the TRB_SMM flag will
be set in every TD and driver will recognize the end of transfer after
processing the first TD with TRB_SMM. In result driver stops updating
request->actual and returns incorrect actual length.
To fix this issue driver additionally must check TRB_CHAIN which is not
used for isochronous transfers.

Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdns3: fix issue with rearming ISO OUT endpoint

commit b46a6b09fa056042a302b181a1941f0056944603 upstream.

ISO OUT endpoint is enabled during queuing first usb request
in transfer ring and disabled when TRBERR is reported by controller.
After TRBERR and before next transfer added to TR driver must again
reenable endpoint but does not.
To solve this issue during processing TRBERR event driver must
set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field.

Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
cc: <stable@vger.kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: fix wrong order of phy_power_on and phy_init

commit f9b995b49a07bd0d43b0e490f59be84415c745ae upstream.

Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().

Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c")
Cc: stable@vger.kernel.org
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: tcpm: Return ENOTSUPP for power supply prop writes

commit f2d38edc5e3375e56b4a30d5b66cefd385a2b38c upstream.

When the port does not support USB PD, prevent transition to PD
only states when power supply property is written. In this case,
TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
which should not be the case given that the port is not pd_capable.

[   84.308251] state change SNK_READY -> SNK_NEGOTIATE_CAPABILITIES [rev3 NONE_AMS]
[   84.308335] Setting usb_comm capable false
[   84.323367] set_auto_vbus_discharge_threshold mode:3 pps_active:n vbus:5000 ret:0
[   84.323376] state change SNK_NEGOTIATE_CAPABILITIES -> SNK_WAIT_CAPABILITIES [rev3 NONE_AMS]

Fixes: e9e6e164ed8f6 ("usb: typec: tcpm: Support non-PD mode")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20220817215410.1807477-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device

commit 1b1b672cc1d4fb3065dac79efb8901bd6244ef69 upstream.

This adds the necessary ACPI ID for Intel Meteor Lake
IOM devices.

The callback function is_memory() is modified so that it
also checks if the resource descriptor passed to it is a
memory type "Address Space Resource Descriptor".

On Intel Meteor Lake the ACPI memory resource is not
described using the "32-bit Memory Range Descriptor" because
the memory is outside of the 32-bit address space. The
memory resource is described using the "Address Space
Resource Descriptor" instead.

Intel Meteor Lake is the first platform to describe the
memory resource for this device with Address Space Resource
Descriptor, but it most likely will not be the last.
Therefore the change to the is_memory() callback function
is made generic.

Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Cc: stable@vger.kernel.org
[ heikki: Rewrote the commit message. ]
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles

commit c1e5c2f0cb8a22ec2e14af92afc7006491bebabb upstream.

Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.

According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.

For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:

        dp->alt->vdo=0x140045

The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.

This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.

To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.

Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Co-developed-by: Pablo Sun <pablo.sun@mediatek.com>
Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pablo Sun <pablo.sun@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode

commit 8ffe20d08f2c95d702c453020d03a4c568a988f0 upstream.

We added PIDs for MV32-WA/WB MBIM mode before, now we need to add
support for RmNet mode.

Test evidence as below:
T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f3 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F3 USB Mobile Broadband
S:  SerialNumber=d7b4be8d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

T:  Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e2d ProdID=00f4 Rev=05.04
S:  Manufacturer=Cinterion
S:  Product=Cinterion PID 0x00F4 USB Mobile Broadband
S:  SerialNumber=d095087d
C:  #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option

Signed-off-by: Slark Xiao <slark_xiao@163.com>
[ johan: sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add Quectel EM060K modem

commit f766f3abe6dbc9bf8b56a5d53c87e5a17942c154 upstream.

Add usb product id entry for the Quectel EM060K module.

"MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2c7c ProdID=030b Rev= 5.04
S:  Manufacturer=Quectel
S:  Product=EM060K-GL
S:  SerialNumber=89fb57db
C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
A:  FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
[ johan: mention QDSS port and sort entries ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for OPPO R11 diag port

commit 8d5fc280392735e4441b35de14f2f4860fa8d83c upstream.

Add support for OPPO R11 USB diag serial port to option driver. This
phone uses Qualcomm Snapdragon 660 SoC.

usb-devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=22d9 ProdID=276c Rev=04.04
S:  Manufacturer=OPPO
S:  Product=SDM660-MTP _SN:09C6BCA7
S:  SerialNumber=beb2c403
C:  #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs

Signed-off-by: Yan Xinyu <sdlyyxy@bupt.edu.cn>
Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn
Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: add Decagon UCA device id

commit ceb4038472a4803e7046ed488b03d11551991514 upstream.

Add the device id for Decagon Devices USB Cable Adapter.

Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Add grace period after xHC start to prevent premature runtime suspend.

commit 33e321586e37b642ad10594b9ef25a613555cd08 upstream.

After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.

It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.

In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.

If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.

So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: mceusb: Use new usb_control_msg_*() routines

commit 608e58a0f4617977178131f5f68a3fce1d3f5316 upstream.

Automatic kernel fuzzing led to a WARN about invalid pipe direction in
the mceusb driver:

------------[ cut here ]------------
usb 6-1: BOGUS control dir, pipe 80000380 doesn't match bRequestType 40
WARNING: CPU: 0 PID: 2465 at drivers/usb/core/urb.c:410
usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 2465 Comm: kworker/0:2 Not tainted 5.19.0-rc4-00208-g69cb6c6556ad #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.13.0-1ubuntu1.1 04/01/2014
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_submit_urb+0x1326/0x1820 drivers/usb/core/urb.c:410
Code: 7c 24 40 e8 ac 23 91 fd 48 8b 7c 24 40 e8 b2 70 1b ff 45 89 e8
44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 a0 30 a9 86 e8 48 07 11 02 <0f> 0b
e9 1c f0 ff ff e8 7e 23 91 fd 0f b6 1d 63 22 83 05 31 ff 41
RSP: 0018:ffffc900032becf0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8881100f3058 RCX: 0000000000000000
RDX: ffffc90004961000 RSI: ffff888114c6d580 RDI: fffff52000657d90
RBP: ffff888105ad90f0 R08: ffffffff812c3638 R09: 0000000000000000
R10: 0000000000000005 R11: ffffed1023504ef1 R12: ffff888105ad9000
R13: 0000000000000040 R14: 0000000080000380 R15: ffff88810ba96500
FS: 0000000000000000(0000) GS:ffff88811a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffe810bda58 CR3: 000000010b720000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usb_start_wait_urb+0x101/0x4c0 drivers/usb/core/message.c:58
usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
usb_control_msg+0x31c/0x4a0 drivers/usb/core/message.c:153
mceusb_gen1_init drivers/media/rc/mceusb.c:1431 [inline]
mceusb_dev_probe+0x258e/0x33f0 drivers/media/rc/mceusb.c:1807

The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.

More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines.  That's
what this fix does.

Link: https://lore.kernel.org/all/CAB7eexLLApHJwZfMQ=X-PtRhw0BgO+5KcSMS05FNUYejJXqtSA@mail.gmail.com/
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rondreis <linhaoguo86@gmail.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YwkfnBFCSEVC6XZu@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: pci: Add support for Intel Raptor Lake

commit bad0d1d726ace2db9e0f39c62b173bc7cc43dd6a upstream.

This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.

Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Use the actual buffer in tb_async_error()

commit eb100b8fa8e8b59eb3e5fc7a5fd4a1e3c5950f64 upstream.

The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.

Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: Cache feature_persistent value before advertisement

commit fe8f65b018effbf473f53af3538d0c1878b8b329 upstream.

Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront.  Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.

Commit 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise.  Therefore blkfront advertises
without reading the parameter.  As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.

This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.

Fixes: 402c43ea6b34 ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkfront: Advertise feature-persistent as user requested

commit 9f5e0fe5d05f7e8de7f39b2b10089834eb0ff787 upstream.

The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature.  However, commit
74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value.  As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.

This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.

Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen-blkback: Advertise feature-persistent as user requested

commit 06ba5d2e943e97bb66e75c152e87f1d2c7027a67 upstream.

The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature.  However, commit
aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value.  As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.

This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.

Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: pagewalk: Fix race between unmap and page walker

[ Upstream commit 8782fb61cc848364e1e1599d76d3c9dd58a1cc06 ]

The mmap lock protects the page walker from changes to the page tables
during the walk.  However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.

For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.

For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.

This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging.  As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.

Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()

[ Upstream commit e9ea0b30ada008f4e65933f449db6894832cb242 ]

The change from kcalloc() to kvmalloc() means that arg->nr_pages
might now be large enough that the "args->nr_pages << PAGE_SHIFT" can
result in an integer overflow.

Fixes: b3f7931f5c61 ("xen/gntdev: switch from kcalloc() to kvcalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/YxDROJqu/RPvR0bi@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES

[ Upstream commit 0204750bd4c6ccc2fb7417618477f10373b33f56 ]

KVM should not claim to virtualize unknown IA32_ARCH_CAPABILITIES
bits. When kvm_get_arch_capabilities() was originally written, there
were only a few bits defined in this MSR, and KVM could virtualize all
of them. However, over the years, several bits have been defined that
KVM cannot just blindly pass through to the guest without additional
work (such as virtualizing an MSR promised by the
IA32_ARCH_CAPABILITES feature bit).

Define a mask of supported IA32_ARCH_CAPABILITIES bits, and mask off
any other bits that are set in the hardware MSR.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20220830174947.2182144-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: pca953x: Add mutex_lock for regcache sync in PM

[ Upstream commit 518e26f11af2fe4f5bebf9a0351595d508c7077f ]

The regcache sync will set the cache_bypass = true, at that
time, when there is regmap write operation, it will bypass
the regmap cache, then the regcache sync will write back the
value from cache to register, which is not as our expectation.

Though regmap already use its internal lock to avoid such issue,
but this driver force disable the regmap internal lock in its
regmap config: disable_locking = true

To avoid this issue, use the driver's own lock to do the protect
in system PM.

Fixes: b76574300504 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (gpio-fan) Fix array out of bounds access

[ Upstream commit f233d2be38dbbb22299192292983037f01ab363c ]

The driver does not check if the cooling state passed to
gpio_fan_set_cur_state() exceeds the maximum cooling state as
stored in fan_data->num_speeds. Since the cooling state is later
used as an array index in set_fan_speed(), an array out of bounds
access can occur.
This can be exploited by setting the state of the thermal cooling device
to arbitrary values, causing for example a kernel oops when unavailable
memory is accessed this way.

Example kernel oops:
[  807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064
[  807.987369] Mem abort info:
[  807.987398]   ESR = 0x96000005
[  807.987428]   EC = 0x25: DABT (current EL), IL = 32 bits
[  807.987477]   SET = 0, FnV = 0
[  807.987507]   EA = 0, S1PTW = 0
[  807.987536]   FSC = 0x05: level 1 translation fault
[  807.987570] Data abort info:
[  807.987763]   ISV = 0, ISS = 0x00000005
[  807.987801]   CM = 0, WnR = 0
[  807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000
[  807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[  807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[  807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
[  807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G         C        5.15.56-v8+ #1575
[  807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[  807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.988691] sp : ffffffc008cf3bd0
[  807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000
[  807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920
[  807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c
[  807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000
[  807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70
[  807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[  807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c
[  807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009
[  807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8
[  807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060
[  807.989084] Call trace:
[  807.989091]  set_fan_speed.part.5+0x34/0x80 [gpio_fan]
[  807.989113]  gpio_fan_set_cur_state+0x34/0x50 [gpio_fan]
[  807.989199]  cur_state_store+0x84/0xd0
[  807.989221]  dev_attr_store+0x20/0x38
[  807.989262]  sysfs_kf_write+0x4c/0x60
[  807.989282]  kernfs_fop_write_iter+0x130/0x1c0
[  807.989298]  new_sync_write+0x10c/0x190
[  807.989315]  vfs_write+0x254/0x378
[  807.989362]  ksys_write+0x70/0xf8
[  807.989379]  __arm64_sys_write+0x24/0x30
[  807.989424]  invoke_syscall+0x4c/0x110
[  807.989442]  el0_svc_common.constprop.3+0xfc/0x120
[  807.989458]  do_el0_svc+0x2c/0x90
[  807.989473]  el0_svc+0x24/0x60
[  807.989544]  el0t_64_sync_handler+0x90/0xb8
[  807.989558]  el0t_64_sync+0x1a0/0x1a4
[  807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416)
[  807.989627] ---[ end trace 8ded4c918658445b ]---

Fix this by checking the cooling state and return an error if it
exceeds the maximum cooling state.

Tested on a Raspberry Pi 3.

Fixes: b5cf88e46bad ("(gpio-fan): Add thermal control hooks")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Add missing newline

[ Upstream commit 13b5cf8d6a0d4a5d289e1ed046cadc63b416db85 ]

Some log messages lacks the final newline. So add them.

Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220713154953.3336-3-stefan.wahren@i2se.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Prevent out-of-bounds access

[ Upstream commit bc163555603e4ae9c817675ad80d618a4cdbfa2d ]

The while loop in raspberrypi_discover_clocks() relies on the assumption
that the id of the last clock element is zero. Because this data comes
from the Videocore firmware and it doesn't guarantuee such a behavior
this could lead to out-of-bounds access. So fix this by providing
a sentinel element.

Fixes: 93d2725affd6 ("clk: bcm: rpi: Discover the firmware clocks")
Link: https://github.com/raspberrypi/firmware/issues/1688
Suggested-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220713154953.3336-2-stefan.wahren@i2se.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()

[ Upstream commit b7fa6242f3e035308a76284560e4f918dad9b017 ]

We should have 'n', then 'size', not the opposite.
This is harmless because the 2 values are just multiplied, but having
the correct order silence a (unpublished yet) smatch warning.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/49d726d11964ca0e3757bdb5659e3b3eaa1572b5.1653081643.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate

[ Upstream commit 35f73cca1cecda0c1f8bb7d8be4ce5cd2d46ae8c ]

The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate
hook) can fail to get the clock rate from the firmware. In this case
we cannot return a signed error value, which would be casted to
unsigned long. Fix this by returning 0 instead.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220625083643.4012-1-stefan.wahren@i2se.com
Fixes: 4e85e535e6cc ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: rk805-pwrkey - fix module autoloading

[ Upstream commit 99077ad668ddd9b4823cc8ce3f3c7a3fc56f6fd9 ]

Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.

Fixes: 5a35b85c2d92 ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: core: Fix runtime PM sequence in clk_core_unprepare()

[ Upstream commit 4b592061f7b3971c70e8b72fc42aaead47c24701 ]

In the original commit 9a34b45397e5 ("clk: Add support for runtime PM"),
the commit message mentioned that pm_runtime_put_sync() would be done
at the end of clk_core_unprepare(). This mirrors the operations in
clk_core_prepare() in the opposite order.

However, the actual code that was added wasn't in the order the commit
message described. Move clk_pm_runtime_put() to the end of
clk_core_unprepare() so that it is in the correct order.

Fixes: 9a34b45397e5 ("clk: Add support for runtime PM")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"

[ Upstream commit abb5f3f4b1f5f0ad50eb067a00051d3587dec9fb ]

This reverts commit 35b0fac808b95eea1212f8860baf6ad25b88b087. Alexander
reports that it causes boot failures on i.MX8M Plus based boards
(specifically imx8mp-tqma8mpql-mba8mpxl.dts).

Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Fixes: 35b0fac808b9 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops")
Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops

[ Upstream commit 35b0fac808b95eea1212f8860baf6ad25b88b087 ]

In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.

This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.

Fixes: fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")
Fixes: a4b3518d146f ("clk: core: support clocks which requires parents enable (part 1)")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported"

[ Upstream commit 233f56745be446b289edac2ba8184c09365c005e ]

There is a spelling mistake in a gvt_vgpu_err error message. Fix it.

Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()

[ Upstream commit 020dac4187968535f089f83f376a72beb3451311 ]

Regardless of the 'msr' argument passed to the VMX version of
msr_write_intercepted(), the function always checks to see if a
specific MSR (IA32_SPEC_CTRL) is intercepted for write.  This behavior
seems unintentional and unexpected.

Modify the function so that it checks to see if the provided 'msr'
index is intercepted for write.

Fixes: 67f4b9969c30 ("KVM: nVMX: Handle dynamic MSR intercept toggling")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220810213050.2655000-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix small mempool leak in SMB2_negotiate()

commit 27893dfc1285f80f80f46b3b8c95f5d15d2e66d0 upstream.

In some cases of failure (dialect mismatches) in SMB2_negotiate(), after
the request is sent, the checks would return -EIO when they should be
rather setting rc = -EIO and jumping to neg_exit to free the response
buffer from mempool.

Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix alloc->vma_vm_mm null-ptr dereference

commit 1da52815d5f1b654c89044db0cdc6adce43da1f1 upstream.

Syzbot reported a couple issues introduced by commit 44e602b4e52f
("binder_alloc: add missing mmap_lock calls when using the VMA"), in
which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not
been initialized yet.

This can happen if a binder_proc receives a transaction without having
previously called mmap() to setup the binder_proc->alloc space in [1].
Also, a similar issue occurs via binder_alloc_print_pages() when we try
to dump the debugfs binder stats file in [2].

Sample of syzbot's crash report:
  ==================================================================
  KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
  CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0
  syz-executor229[3755] cmdline: ./syz-executor2294415195
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
  RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923
  [...]
  Call Trace:
   <TASK>
   lock_acquire kernel/locking/lockdep.c:5666 [inline]
   lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631
   down_read+0x98/0x450 kernel/locking/rwsem.c:1499
   mmap_read_lock include/linux/mmap_lock.h:117 [inline]
   binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline]
   binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593
   binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199
   binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986
   binder_ioctl_write_read drivers/android/binder.c:5036 [inline]
   binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:870 [inline]
   __se_sys_ioctl fs/ioctl.c:856 [inline]
   __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
   do_syscall_x64 arch/x86/entry/common.c:50 [inline]
   do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
   [...]
  ==================================================================

Fix these issues by setting up alloc->vma_vm_mm pointer during open()
and caching directly from current->mm. This guarantees we have a valid
reference to take the mmap_lock during scenarios described above.

[1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459
[2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9

Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+f7dc54e5be28950ac459@syzkaller.appspotmail.com
Reported-by: syzbot+a75ebe0452711c9e56d9@syzkaller.appspotmail.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220829201254.1814484-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: fix UAF of ref->proc caused by race condition

commit a0e44c64b6061dda7e00b7c458e4523e2331b739 upstream.

A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the
reference for a node. In this case, the target proc normally releases
the failed reference upon close as expected. However, if the target is
dying in parallel the call will race with binder_deferred_release(), so
the target could have released all of its references by now leaving the
cleanup of the new failed reference unhandled.

The transaction then ends and the target proc gets released making the
ref->proc now a dangling pointer. Later on, ref->node is closed and we
attempt to take spin_lock(&ref->proc->inner_lock), which leads to the
use-after-free bug reported below. Let's fix this by cleaning up the
failed reference on the spot instead of relying on the target to do so.

  ==================================================================
  BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150
  Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590

  CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events binder_deferred_func
  Call trace:
   dump_backtrace.part.0+0x1d0/0x1e0
   show_stack+0x18/0x70
   dump_stack_lvl+0x68/0x84
   print_report+0x2e4/0x61c
   kasan_report+0xa4/0x110
   kasan_check_range+0xfc/0x1a4
   __kasan_check_write+0x3c/0x50
   _raw_spin_lock+0xa8/0x150
   binder_deferred_func+0x5e0/0x9b0
   process_one_work+0x38c/0x5f0
   worker_thread+0x9c/0x694
   kthread+0x188/0x190
   ret_from_fork+0x10/0x20

Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Cc: stable <stable@kernel.org> # 4.14+
Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure

commit 63f1560930e4e1c4f6279b8ae715c9841fe1a6d3 upstream.

If re-initialization results is a different signal voltage, because the
voltage switch failed previously, but not this time (or vice versa), then
sd3_bus_mode will be inconsistent with the card because the SD_SWITCH
command is done only upon first initialization.

Fix by always reading SD_SWITCH information during re-initialization, which
also means it does not need to be re-read later for the 1.8V fixup
workaround.

Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added
about 1% to 1.5% to the re-initialization time, so it's not particularly
significant.

Reported-by: Seunghui Lee <sh043.lee@samsung.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Tested-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Fix UHS-I SD 1.8V workaround branch

commit 15c56208c79c340686869c31595c209d1431c5e8 upstream.

When introduced, upon success, the 1.8V fixup workaround in
mmc_sd_init_card() would branch to practically the end of the function, to
a label named "done". Unfortunately, perhaps due to the label name, over
time new code has been added that really should have come after "done" not
before it. Let's fix the problem by moving the label to the correct place
and rename it "cont".

Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id

commit 001047ea241a9646010b2744451dfbc7289542f3 upstream.

works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null

but doing this every reboot is a pain in the ass.

Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: fastrpc: fix memory corruption on open

commit d245f43aab2b61195d8ebb64cef7b5a08c590ab4 upstream.

The probe session-duplication overflow check incremented the session
count also when there were no more available sessions so that memory
beyond the fixed-size slab-allocated session array could be corrupted in
fastrpc_session_alloc() on open().

Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: fastrpc: fix memory corruption on probe

commit 9baa1415d9abdd1e08362ea2dcfadfacee8690b5 upstream.

Add the missing sanity check on the probed-session count to avoid
corrupting memory beyond the fixed-size slab-allocated session array
when there are more than FASTRPC_MAX_SESSIONS sessions defined in the
devicetree.

Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: mcp3911: use correct formula for AD conversion

commit 9e2238e3ae40d371a1130226e0e740aa1601efa6 upstream.

The ADC conversion is actually not rail-to-rail but with a factor 1.5.
Make use of this factor when calculating actual voltage.

Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ad7292: Prevent regulator double disable

commit 22b4277641c6823ec03d5b1cd82628e5e53e75b7 upstream.

The ad7292 tries to add an devm_action for disabling a regulator at
device detach using devm_add_action_or_reset(). The
devm_add_action_or_reset() does call the release function should adding
action fail. The driver inspects the value returned by
devm_add_action_or_reset() and manually calls regulator_disable() if
adding the action has failed. This leads to double disable and messes
the enable count for regulator.

Do not manually call disable if devm_add_action_or_reset() fails.

Fixes: 506d2e317a0a ("iio: adc: Add driver support for AD7292")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/Yv9O+9sxU7gAv3vM@fedora
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag

commit 98e01215708b6d416345465c09dce2bd4868c67a upstream.

syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().

It seems that the cause is simply that commit c2b27ef672992a20 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().

Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().

Reported-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Fixes: c2b27ef672992a20 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete

commit d5a2e0834364377a5d5a2fff1890a0b3f0bafd1f upstream.

When the user initializes the uart port, and waits for the transmit
engine to complete in lpuart32_set_termios(), if the UART TX fifo has
dirty data and the UARTMODIR enable the flow control, the TX fifo may
never be empty. So here we should disable the flow control first to make
sure the transmit engin can complete.

Fixes: 380c966c093e ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

musb: fix USB_MUSB_TUSB6010 dependency

commit a3f2fd22743fc56dd5e3896a3fbddd276df1577f upstream.

Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because
of an older issue with the depencency.

It is not necessary to forbid NOP_USB_XCEIV=y in combination with
USB_MUSB_HDRC=m, but only the reverse, which causes the link failure
from the original Kconfig change.

Use the correct dependency to still allow NOP_USB_XCEIV=n or
NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m
to fix the multi_v7_defconfig for tusb.

Fixes: ab37a7a890c1 ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in")
Fixes: c0442479652b ("usb: musb: Fix randconfig build issues for Kconfig options")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220818135737.3143895-10-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: Clear selection before changing the font

commit 566f9c9f89337792070b5a6062dff448b3e7977f upstream.

When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().

Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.

Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: align syscall table for ppc32

commit c7acee3d2f128a38b68fb7af85dbbd91bfd0b4ad upstream.

Christophe Leroy reported that commit 7b4537199a4a ("kbuild: link
symbol CRCs at final link,  removing CONFIG_MODULE_REL_CRCS") broke
mpc85xx_defconfig + CONFIG_RELOCATABLE=y.

    LD      vmlinux
    SYSMAP  System.map
    SORTTAB vmlinux
    CHKREL  vmlinux
  WARNING: 451 bad relocations
  c0b312a9 R_PPC_UADDR32     .head.text-0x3ff9ed54
  c0b312ad R_PPC_UADDR32     .head.text-0x3ffac224
  c0b312b1 R_PPC_UADDR32     .head.text-0x3ffb09f4
  c0b312b5 R_PPC_UADDR32     .head.text-0x3fe184dc
  c0b312b9 R_PPC_UADDR32     .head.text-0x3fe183a8
      ...

The compiler emits a bunch of R_PPC_UADDR32, which is not supported by
arch/powerpc/kernel/reloc_32.S.

The reason is there exists an unaligned symbol.

  $ powerpc-linux-gnu-nm -n vmlinux
    ...
  c0b31258 d spe_aligninfo
  c0b31298 d __func__.0
  c0b312a9 D sys_call_table
  c0b319b8 d __func__.0

Commit 7b4537199a4a is not the root cause. Even before that, I can
reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y
+ CONFIG_MODVERSIONS=n.

It is just that nobody noticed because when CONFIG_MODVERSIONS is
enabled, a __crc_* symbol inserted before sys_call_table was hiding the
unalignment issue.

Adding alignment to the syscall table for ppc32 fixes the issue.

Cc: stable@vger.kernel.org
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Trim change log discussion, add Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/
Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>