Jian Cao [Thu, 10 Jan 2019 08:55:53 +0000 (16:55 +0800)]
ge2d: fix strechblit issue for GE2D [1/1]
PD#SWPL-4075
Problem:
dst data is not normal by using strechblit function
such as 1920x1080 --> 640x360
Solution:
add bit width restriction for
horizontal scaler initial phase
Verify:
verified on g12b-w400
Change-Id: Ibcd85cc08f49254e90100beb952e711736531134
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
ge2d: add enhanced hsc adv num support [2/2]
PD#SWPL-4075
Problem:
add enhanced hsc adv num support
Solution:
add enhanced hsc adv num support
Verify:
verified on g12b-w400
Change-Id: I13b52a0b10e8f3830c57ff691ef3472a34cbe89c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Jian Cao [Thu, 3 Jan 2019 12:36:22 +0000 (20:36 +0800)]
ge2d: add support for nv16 [1/1]
PD#SWPL-3876
Problem:
add support for nv16
Solution:
add support for nv16
Verify:
verified on g12a-u200
Change-Id: I34c9179ed4fde43b9bd00caa9505ea4c8ee78eb0
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Shuai Li [Thu, 6 Jun 2019 09:25:03 +0000 (17:25 +0800)]
audio: Add pcm slots configs [1/1]
PD#SWPL-4711
Problem:
BT pcm record doesn't work.
Solution:
Add pcm configs in DTS.
Verify:
ampere
Change-Id: I87c2cb62fb803527da089c5a2aea33752939e000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Rico Yang [Thu, 30 May 2019 07:22:45 +0000 (15:22 +0800)]
common: videosink: add dropping frame mechanism in amvideo [1/1]
PD#OTT-4124
Problem:
video frames cannot be dropped when displayed in video layer
Solution:
add dropping frame mechanism in amvideo
Verify:
verified on franlin
Change-Id: I751883543adc5c840921bd5062484e56cde2c0fa
Signed-off-by: Rico Yang <wei.yang@amlogic.com>
Conflicts:
drivers/amlogic/media/video_sink/video.c
Luan Yuan [Thu, 20 Jun 2019 11:32:22 +0000 (19:32 +0800)]
p231: cannot open wifi. [2/2]
PD#SWPL-10117
Problem:
p231 can not enable wifi
Solution:
add pre-assign memory
Verify:
verify by p231
Change-Id: I10c11743033d049be2dbab0555d49f9e470d6f04
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Luan Yuan [Mon, 17 Jun 2019 11:13:54 +0000 (19:13 +0800)]
dts: logo addr overflows the max size in 1g platform.[1/1]
PD#SWPL-9938
Problem:
logo addr overflows the max size in 1g platform.
Solution:
fixed it
Verify:
verify by fermi
Change-Id: Ic1edc545c702b10d88cd03ddc4b761f142457b43
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Pengcheng Chen [Fri, 31 May 2019 07:06:18 +0000 (15:06 +0800)]
osd: add osd blend bypass function [1/1]
PD#SWPL-9525
Problem:
dv certification need osd blend bypass
Solution:
add osd blend bypass function
Verify:
verified in sm1
Change-Id: Iabf5f8e41329a9220b1f9e5ccd7e0b0ab0dd7a3f
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Pengcheng Chen [Thu, 13 Jun 2019 10:27:15 +0000 (18:27 +0800)]
osd: screen blank when Plugin HDMI after system bootup in 15s [1/1]
PD#OTT-4292
Problem:
Root Cause:gralloc set afbcd = 1, but hwcomposer have no frame set,
hdmi plug and uboot logo update and osd_enable_hw() called, in this api,
there is a protection: if afbcd.enable set and phy_addr == 0 will
wait vsync till phy_addr != 0, this section code logic caused screen blank
Solution:
when gralloc set afbcd = 1, don't set afbcd.enable = 1,
it will update with hwcomposer post afbc frame.
Verify:
verify with Raven
Change-Id: I98a88cffd139832a34825adde7c21219937b63ce
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yong Qin [Wed, 19 Jun 2019 09:39:42 +0000 (17:39 +0800)]
cec: cmd read some time will loss msg [1/1]
PD#SWPL-9283
Problem:
android read cec, some time will lose msg
Solution:
del hal flag
Verify:
tl1
Change-Id: I2357ff2a09c60e930e64d663650a4d4509688c71
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jian Cao [Tue, 11 Jun 2019 14:32:22 +0000 (22:32 +0800)]
picdec: memory pollution caused by GE2D [1/1]
PD#OTT-4501
Problem:
the dst canvas phy address for ge2d is overwritten
out of bound before processing
Solution:
alloc canvas index dynamically
Verify:
verified on g12b-w400
Change-Id: If021c087125928d5fb146118432c7ff427ea0dbb
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
shaochan.liu [Tue, 21 May 2019 07:59:46 +0000 (15:59 +0800)]
lcd: add lcd tv driver when the panel disable in uboot [1/1]
PD#SWPL-5937
Problem:
need screen initialization moved from uboot to kernel
Solution:
1, add lcd tv driver when the panel disable in uboot
Verify:
t962x2-x301
Change-Id: Ia7837db5f6581543b2a093357a264ee63dbd33a9
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Hong Guo [Thu, 13 Jun 2019 07:38:59 +0000 (15:38 +0800)]
cpufreq: delete 100M and 250M cpu clk for g12b [1/1]
PD#OTT-4558
Problem:
delete 100M and 250M cpu clk for g12b
Solution:
delete 100M and 250M cpu clk for g12b
Verify:
test pass on g12b w400
Change-Id: Id8a858d5c56b44325e750702f1af3ca5cfd247c4
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Yong Qin [Thu, 13 Jun 2019 03:02:10 +0000 (11:02 +0800)]
vdin: record video, video display green screen [1/1]
PD#SWPL-9172
Problem:
no more canvas id for vdin1 use
Solution:
the canvas id number need equal with frame number.
Verify:
tl1
Change-Id: Idff362218042c260c28116816d747260708f6355
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Pengcheng Chen [Thu, 13 Jun 2019 10:18:12 +0000 (18:18 +0800)]
osd: display abnormal when 2nd osd laysers scope > 1080 [1/1]
PD#OTT-4277
Problem:
osd display abnormal when 2nd osd laysers scope > 1080
default osd scope value in disable channel is too small
Solution:
set default osd scope value in disable channel to 0xffffffff
Verify:
verified by S905D2-U200
Change-Id: I9983928d91c1ac4285f2a5acdffa5438722e4ab4
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
zhiwei.yuan [Wed, 5 Jun 2019 11:48:42 +0000 (19:48 +0800)]
vdin: vdin write register fail sometimes due to gate clk is off [1/1]
PD#SWPL-9372
Problem:
write register after clk off
Solution:
write register after clk on
Verify:
verified by t962x2_x301
Change-Id: Id9639d98a5434a8be22f0de9bf4ed778b9cbeb9f
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Zongdong Jiao [Thu, 13 Jun 2019 08:05:18 +0000 (16:05 +0800)]
hdmitx: correct hpd trigger [1/1]
PD#SWPL-8724
Problem:
When kernel boots up, there will be two irq status.
[ 0.602639] hdmitx: system: irq
80000004 0
[ 0.622658] hdmitx: system: irq
80000002 0
Solution:
Correct hpd trigger
Verify:
G12/U212
Change-Id: I3c913c6d46ac4e639032134c598050b5c77a047d
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Zongdong Jiao [Fri, 14 Jun 2019 08:27:19 +0000 (16:27 +0800)]
hdmitx: add SCDC/CED function [1/1]
PD#SWPL-6361
Problem:
Lack SCDC/CED function to check Rx TMDS status
Solution:
Add SCDC/CED function
By default, this function is not open.
Enable it in board dts file like below:
&amhdmitx {
cedst_en = <1>;
};
Also, you can manually enable it by
'echo 1 > /sys/class/amhdmitx/amhdmitx0/cedst_policy'
Then listen '/sys/class/extcon/hdmi_cedst/uevent'
and check 'cat /sys/class/amhdmitx/amhdmitx0/cedst_count'
Verify:
G12/U212
Change-Id: Ic9c90936bad643ea95d418d7b019eb37210d7123
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Gongwei Chen [Mon, 17 Jun 2019 11:51:04 +0000 (19:51 +0800)]
dts: S905D3 gpio keypad [1/1]
PD#SWPL-9941
Problem:
The camera automatically takes pictures continuously
Solution:
modify S905D3 gpio keypad in dts
Verify:
Verify by Android P u202
Change-Id: I4edd1032ac460db296a8938d15ecd6ba1224f0ce
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Pengcheng Chen [Tue, 11 Jun 2019 09:28:52 +0000 (17:28 +0800)]
osd: osd afbc decode err when dv enable and FF/FR [1/1]
PD#SWPL-9344
Problem:
osd hold line is too small when dv enable
Solution:
enlarge osd hold line from 4 to 8
Verify:
verified by franklin
Change-Id: I81d1fe210fe6e9f9a065d7ff75178ef1807f3e43
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Guosong Zhou [Tue, 11 Jun 2019 06:00:03 +0000 (14:00 +0800)]
camera: add gc2145 mipi camera driver [1/2]
PD#SWPL-8903
Problem:
S905D3 project need bring up gc2145 mipi camera
Solution:
bring up gc2145 mipi camera on S905D3-AC202
Verify:
verify on S905D3-AC202
Change-Id: I5c7c3c551eca7ec20759e724c24d725f89641d96
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
Yong Qin [Mon, 25 Feb 2019 09:19:48 +0000 (17:19 +0800)]
cec: early suspend no report power sts [2/2]
PD#SWPL-5037
Problem:
system enter early suspend, not ack "report power sts"
Solution:
early suspend not called.
not use CONFIG_AMLOGIC_LEGACY_EARLY_SUSPEND
Verify:
g12a s905x2 android P
Change-Id: I0e2d691b927575b3a6b5e7c13668de9bbf6519f7
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Luan Yuan [Tue, 18 Jun 2019 07:03:48 +0000 (15:03 +0800)]
staging: revert SWPL-9254 fixed issue. [1/1]
PD#SWPL-9788
Problem:
UI sliding is not smooth.
Solution:
revert SWPL-9254 two commits.
Verify:
verify by franklin/galilei
Revert "staging: android: ion: Call dma_map_sg for syncing and mapping [2/2]"
This reverts commit
4c0482c80ece66a40796c7b476a15640ed1eadfa.
Revert "staging: android: ion: Duplicate sg_table [1/2]"
This reverts commit
b78959e21bea51b0ab1882b7c55a35c5d4f7fff1.
Luan Yuan [Tue, 18 Jun 2019 06:34:44 +0000 (14:34 +0800)]
deinterlace: add sysfs pulldown_enable. [1/1]
PD#SWPL-9750
Problem:
the system lost pulldown_enable
Solution:
fixed it
Verify:
verify by franklin
Change-Id: I2b5fe4f74ecf295bb44bdeecfeb6a5cc9188c3f3
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
yao liu [Fri, 17 May 2019 09:32:59 +0000 (17:32 +0800)]
dv: The first frame is abnormal when play video [1/1]
PD#SWPL-6480
Problem:
core1 reg is set wrong for g12 and tm2
Solution:
correct core1 reg for g12 and tm2
Verify:
verified by u212
Change-Id: Ie9de107fce6f23ded1397827ebe95a00939df8c1
Signed-off-by: yao liu <yao.liu@amlogic.com>
shihong.zheng [Sat, 8 Jun 2019 03:45:51 +0000 (11:45 +0800)]
ptsserv: add first pts64 check in. [1/1]
PD#OTT-4173
Problem:
video stuck after seek. first pts64 is
abnormal when lookup failed.
Solution:
add first pts64 checkin for lookup failed.
Verify:
w400
Change-Id: Ibb2a15815311598cf47c242cb4c369da0f0cbdd2
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Nick Xie [Mon, 5 Aug 2019 06:54:53 +0000 (14:54 +0800)]
Revert "AML: v4l2_qbuf"
This reverts commit
53da15132d8017b730a74357ed9d515efc253d99.
Nick Xie [Mon, 5 Aug 2019 06:47:32 +0000 (14:47 +0800)]
arm64: defconfig: enable CONFIG_BLK_DEV_RAM
Signed-off-by: Nick Xie <nick@khadas.com>
Hanjie Lin [Tue, 4 Jun 2019 10:38:30 +0000 (18:38 +0800)]
defconfig: enable CONFIG_BLK_DEV_RAM [1/1]
PD#SWPL-8728
Problem:
{vts}[SEI 510] VtsKernelLtp module 2 fail
fgetxattr02 test failed
Solution:
enable CONFIG_BLK_DEV_RAM
Verify:
u212
Change-Id: I81c42803757f830f4da11fcb18baeaf28074cf26
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Zongdong Jiao [Tue, 21 May 2019 06:51:08 +0000 (14:51 +0800)]
hdmitx: rewrite multi-purpose VSIF [1/1]
PD#SWPL-8788
Problem:
VSIF has multi-purpose: HDMI_4K, 3D, DV and HDR10+.
Need rewrite VSIF programming.
Solution:
rewrite multi-purpose VSIF
Verify:
G12/U212
Change-Id: I1db21d54c8ae873045661d1f00b930afcad5be60
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
zhiwei.yuan [Thu, 11 Apr 2019 07:53:04 +0000 (15:53 +0800)]
dtv_demod: Play dtv stuttering when the temperature rising [1/1]
PD#SWPL-6985
Problem:
cfo track value is small
Solution:
increase cfo track val to avoid crystal jitter
Verify:
verified by t962x2_x301
Change-Id: Ifcf53f1d06eae204a82dc99154d18c38f370ebc1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
zhiwei.yuan [Mon, 25 Mar 2019 09:28:35 +0000 (17:28 +0800)]
dtv_demod: playing dtmb is not smooth when signal is non-standard [1/1]
PD#SWPL-6286
Problem:
tps of non-standard signal is incorrect
Solution:
ignore calculating amplitude tps
Verify:
verified by t962x2_x301
Change-Id: Ibd3ff7bfe56ca604ad99fa7c6f457202c227c9ae
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
sky zhou [Sat, 6 Apr 2019 11:35:34 +0000 (19:35 +0800)]
osd: fix release dma buf error when vout1&2 run at same time.
PD #SWPL-6027
Problem:
dmabuf panic when vout1,vout2 run at same time.
Solution:
When do pandisplay, only release the dma buf displayed
on current vout pipeline.
Verify:
Verify on macroni.
Change-Id: I8951d55f9f56cbfa509bcbe2906a108c5f50dbfe
Signed-off-by: sky zhou <sky.zhou@amlogic.com>
pengcheng chen [Tue, 20 Nov 2018 01:42:44 +0000 (09:42 +0800)]
osd: add viu2 support for tl1 [1/1]
PD#172587
Problem:
add viu2 support for tl1.
Solution:
add viu2 support for tl1.
Verify:
verified by x301
Change-Id: Ie728f6ee7e0c4c4062e5e12e3d80515d99d020f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
ff60d15 osd: calc osd parameters used num/den replace left/right shift
[1/1]
481d4f2 osd: set hdr size according osd blend0 out size [1/1]
42b54ce osd: afbc decode error when loop viu1 to vdin [1/1]
91bda20 osd: fix afbc decoder error caused flicker in display [1/1]
799ba4c osd: fix hotplug hdmi causes system crash [1/1]
e9fadfe5 osd: fix osd afbc can't display on android5.1 [1/1]
1f8aa33 osd: frame just display on half screen [1/1]
7bcfa18 osd: set osd1 scaler before osd blend [1/1]
6913eaa osd: osd display color abnormal when run drm [1/1]
6862fb2 osd: add viu2 fence support [1/1]
f59b7a6 drm: a113d support drm issue [1/1]
50557a1 osd: reset afbcd flag when convert format value [1/1]
cfbcb3d osd: fix buidroot compile error issue [1/1]
6163540 osd: rdma write miss caused afbc mosaic [1/1]
032a712 osd: fix display frame offset caused osd display abnormal [1/1]
2c1269e osd: osd: recovey mode always blank [1/1]
3be570b osd: osd: reserve vs_ctrl bit for VPP [1/1]
40bfe97 osd: add viu2 support for tl1 [1/1]
osd: osd: reserve vs_ctrl bit for VPP [1/1]
PD#172587
Problem:
reserve vs_ctrl bit for VPP
Solution:
Avoid operating VPP_OFIFO_SIZE bit19 on OSD code
Verify:
verified on t962x2_x301
Change-Id: Ic450d6f64e2349d97d02f0802058b4031564fea4
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: osd: recovey mode always blank [1/1]
PD#TV-1287
Problem:
recovey mode always blank
Solution:
set right condition to enable free_scale
Verify:
verified on P321 board
Change-Id: I2f70b9c5436b30156f157a3297a11a2ef1cfec67
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: fix display frame offset caused osd display abnormal [1/1]
PD#OTT-1663
Problem:
display frame offset caused osd display abnormal
Solution:
remove unnecessary blend dst_data adjust
Verify:
Locally on raven
Change-Id: I38b97f6da750f5edea97416b4d7fc0172dea7466
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: rdma write miss caused afbc mosaic [1/1]
PD#SWPL-4502
Problem:
afbc mosaic when bandwidth is high, root cause is
rdma write regs missed.
Solution:
1. add vsync line detected, if rdma write nearly
vsync, wait vsync needed
2. add rdma write detected, if rdma write missed
wait vsync needed
3. add tl1/g12b afbc backup
Verify:
Locally on tl1
Change-Id: If4fd303c3808525fa44e1118742a3e26830323f5
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: fix buidroot compile error issue [1/1]
PD#SWPL-4502
Problem:
buidlroot compile error
Solution:
fix buidroot compile error issue
Verify:
buildroot make linux-build
Change-Id: I0277c2b3f439946ab680f4c34f30c16e31ea6034
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: reset afbcd flag when convert format value [1/1]
PD#SWPL-5185
Problem:
"fence color format error 28" when test weston-simple-egl
Solution:
reset afbcd flag when convert format value
Verify:
Locally on g12b_w400
Change-Id: I81a9394288026bc596f6b3438cec72ceaad7749f
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
drm: a113d support drm issue [1/1]
PD#SH-397
Problem:
use modetest to test A113D DRM function, displaying is incorrect
Solution:
add linear addr config for a113d drm mode
Verify:
verified on s400
Change-Id: Id6a2c6ad94bc0148815076561d9dc2ae8ded6884
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
osd: add viu2 fence support [1/1]
PD#SWPL-6384
Problem:
viu2 not support fence
Solution:
add viu2 fence support.
Verify:
test pass on tl1
Change-Id: I94a5e483c88cace79b7386bb918c203ada6b8274
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: osd display color abnormal when run drm [1/1]
PD#SWPL-6867
Problem:
osd dispaly color abnormal because osd enable not update.
Solution:
update osd enalbe flag in drm process.
Verify:
Verified u212
Change-Id: I1c2e8b62d9d5af203c95d3d0ac940fb512dd8e5e
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: set osd1 scaler before osd blend [1/1]
PD#SWPL-6596
Problem:
bring up osd for TM2
Solution:
set osd1 scaler before osd blend
Verify:
Verified on T962e2_ab319
Change-Id: I9e7d5fa83b2edc8e9359371695ea46fa3b39e09c
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: frame just display on half screen [1/1]
PD#SWPL-7039
Problem:
bring up osd for TM2
frame just display on half screen
Solution:
fix field_out_en value from array
Verify:
Verified on T962e2_ab319
Change-Id: Id07f3d813242f031125fcac11d3fa05205895448
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
osd: fix osd afbc can't display on android5.1 [1/1]
PD#SWPL-6869
Problem:
afbc can't display with android5.1, because blank enable
called before afbc set, which make osd enable not updated
and afbc not enable when hwc post frame
Solution:
if mali afbc enable, call osd enable.
Verify:
verified on x301
Change-Id: I1d727a586a66c6e7848d09dfb5c5b74ff7a2e3e6
Signed-off-by: Shuide Chen <shuide.chen@amlogic.com>
osd: fix hotplug hdmi causes system crash [1/1]
PD#SWPL-7009
Problem:
hotplug hdmi causes system crash
when unplug hdmi display mode is null, hwc hasn't received
event and post frame normal but osd vsync lost, which caused
wait hw vsync timeout(1s), and fd leak.
Solution:
when process every frame, if display mode is null, exit frame process
just process fence.
Verify:
verified on Raven, franklin
Change-Id: Icbe7cd76776e46a6ed79c6cee3ea05772cc5f9d2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: fix afbc decoder error caused flicker in display [1/1]
PD#OTT-3000
Problem:
afbc decoder error caused flicker in display.
Solution:
close osd prefetch.
Verify:
Verified with raven
Change-Id: I44356c028b41e251f7a98b5e931b2cbd583b0829
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: afbc decode error when loop viu1 to vdin [1/1]
PD#TV-5024
Problem:
afbc decode error when loop viu1 to vdin.
Solution:
set osd hold line to max if vinfo is dummy_panel
Verify:
Tl1 X301
Change-Id: I0ebb312d381accb1890233164f071a095310d2f1
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: set hdr size according osd blend0 out size [1/1]
PD#IPTV-2395
Problem:
osd last line have abnormal data
Solution:
set hdr size according osd blend0 out size
Verify:
Verfied on u212
Change-Id: Iad738b16fce066270c78213f1b696a802e1b8da6
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
osd: calc osd parameters used num/den replace left/right shift [1/1]
PD#OTT-3615
Problem:
a line on the right displayed
Solution:
calc osd parameters used num/den replace left/right shift
Verify:
Verfied on u212
Change-Id: If59d9de0bb3c525d2b67d05ec449d458fbbcdfe2
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Zongdong Jiao [Thu, 23 May 2019 12:59:32 +0000 (20:59 +0800)]
hdmitx: replace I2C_REACTIVE with I2C_RESET logic [1/1]
PD#OTT-3716
Problem:
In GX, there is the I2C_REACTIVE method to avoid the I2C hangup
issue. But it is fixed in G12, so need replace it.
Solution:
Replace I2C_REACTIVE with I2C_RESET logic
Verify:
G12/U212
Change-Id: I1ca2f77a213db0d7de067745b3701816b7c85c27
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Zhe Wang [Thu, 13 Jun 2019 08:48:09 +0000 (16:48 +0800)]
audio: fixed cvbs audio pop noise on g12a/b [1/1]
PD#OTT-3760, PD#SWPL-8309
Problem:
startup ott, cvbs out with pop noise
Solution:
Set gpio init low
Verify:
verified by franklin
Change-Id: Ieb33e72473055fad69bc8e9a68ed0b0552e9f029
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Peng Yixin [Mon, 27 May 2019 14:00:15 +0000 (22:00 +0800)]
vpp: fix out of one pixel between video and the red frame [1/1]
PD#TV-5764
Problem:
Goto the wrong case when using ext_sar
Solution:
Using the correct case when using ext_sar
Verify:
verified on r311
Change-Id: I181b9e8d21917840729f2e487b3dae3f41cd2c5a
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
Pengcheng Chen [Tue, 26 Feb 2019 10:51:50 +0000 (18:51 +0800)]
osd: add afbc source crop support [2/2]
PD#OTT-2168
Problem:
media control bar can't displayed because afbc source crop not support
Solution:
add afbc source crop support
Verify:
verify on raven
Change-Id: Ib1f925aeea12ba18d8f976aba8c84f0738c41293
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
he.he [Thu, 30 May 2019 06:54:52 +0000 (14:54 +0800)]
usb: panel type-c need support adb and u-disk [1/1]
PD#SWPL-9127
Problem:
the id pin of the type-c is aways high, whether it is connected to u disk
or usb cable.
Solution:
It need set vbus high when the usb mode is host only.
Verify:
test passed on sm1
Change-Id: I4ff8a9b5419b54828ecd797a78d149da98535dee
Signed-off-by: he.he <he.he@amlogic.com>
Jiacheng Mei [Tue, 4 Jun 2019 09:33:02 +0000 (17:33 +0800)]
dts: reduce isp reserved mem [1/1]
PD#SWPL-70
Problem:
arm isp can't get reserved mem
Solution:
reduce isp reserved mem
Verify:
w400
Test: camera preview and capture OK
Change-Id: Icaf630a25a55d31ec3ed68cae48fb840017c9fc0
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
Zhe Wang [Tue, 11 Jun 2019 05:55:04 +0000 (13:55 +0800)]
audio: fixed dtv audio clk setting error in samesource [1/1]
PD#SWPL-9593
Problem:
dtv audio is heard slower in spk
Solution:
when mclk is changed, spdif clk changes correspondingly in samesource case
Verify:
X301
Change-Id: I15fcb598ba893762580f0a5aac856376af8c94ec
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Zhe Wang [Thu, 6 Jun 2019 12:22:32 +0000 (20:22 +0800)]
audio: SM1/TM2: bringup EQ/DRC module [1/1]
PD#SWPL-7606
Problem:
EQ/DRC module is out of work
Solution:
bringup EQ/DRC module
Verify:
verified on ac200
Change-Id: Ibd9b1e65aaed2ecd5f3086e4325d6b92fe34b040
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Shuai Li [Tue, 4 Jun 2019 05:41:43 +0000 (13:41 +0800)]
audio: audio ABUS stuck issue [1/1]
PD#SWPL-9142
Problem:
Audio Abus may be stuck if it is stopped
when the burst is not finished.
And the stuck can't be recovered
unless reboot the system.
Solution:
Add check to make sure that the transfer
is over then start to disable the toddr fifo.
Verify:
TL1 stress test.
Change-Id: I28dcf84ddec421bc70370b2544f0bf1f3272e7b4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Zhe Wang [Wed, 22 May 2019 10:40:17 +0000 (18:40 +0800)]
audio: enable clk before extern codec init when system resume [1/1]
PD#TV-6005
Problem:
change time sequence for extern AMP
Solution:
1) enable tdm clk before codec init, when system resume
Verify:
test on X301
Change-Id: I3d6411cd32fbc3496bed942c72b7bec408d66959
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Zhe Wang [Fri, 17 May 2019 07:23:56 +0000 (15:23 +0800)]
audio: fixed audio hw freq responds test fail [1/2]
PD#TV-5865
Problem:
audio hdmiin freq responds test fail
Solution:
enable hw audio resample filter
Verify:
X301 marconi
Change-Id: I78699848049abe6a6b1b682e5a7bb2130fb16c09
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
audio: set resample clk to mclk of tdm [1/2]
PD#TV-5865
Problem:
hdmiin frequency responds test fail.
Solution:
set resample clk to mclk of tdm
Verify:
X301
Change-Id: I22c92219bcea534bdec2bc526d535cacd971faa5
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Jian Xu [Mon, 27 May 2019 11:35:58 +0000 (19:35 +0800)]
audio: meson: fix internal codec mixer api call [1/1]
PD#TV-6267
Problem:
internal codec pointer operation error
Solution:
use 4.9 ALSA standard API to get the codec handle.
Verify:
R311
Change-Id: I52567a914230083054dc0413f818356d71c83a53
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
yujie.wu [Thu, 11 Apr 2019 02:38:54 +0000 (10:38 +0800)]
audio: fix spdif not work on soundbar [1/1]
PD#SWPL-6801
Problem:
There is too much kernel print which
blocks the system
Solution:
Add condition to remove the print log
Verify:
A113
Change-Id: I5762893b424e8201e2725f33854473097f1246b9
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Yong Qin [Fri, 22 Mar 2019 12:41:15 +0000 (20:41 +0800)]
di: add di for sm1 bringup [1/1]
PD#SWPL-5865
Problem:
SM1 bring up
Solution:
add the chipid
Verify:
sm
Change-Id: I9b738efea210b4fb3deb2dab9de6a443aabadb53
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Jihong Sui [Fri, 7 Dec 2018 02:40:26 +0000 (10:40 +0800)]
deinterlace: pq: adjust cue setting for tl1 [1/1]
PD#SWPL-2984
Problem:
VLSI(yanling.liu) fine-tune cue setting for TL1.
Solution:
add new setting.
Verify:
tl1
Change-Id: I99c32d994687650dc851dd2fb8c0464e8ffd21b5
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Wenfeng Guo [Wed, 29 May 2019 07:48:52 +0000 (15:48 +0800)]
di: fix image jitter and flash av ntsc [1/1]
PD#SWPL-8937
Problem:
image jitter and flash av ntsc
Solution:
1.force entry pulldown32
Verify:
tl1
Change-Id: I8e86993be8db358c70cd9a4d86c9d578bce74f6e
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Jihong Sui [Mon, 6 May 2019 10:12:49 +0000 (18:12 +0800)]
deinterlace: tl1: increase protection for unreg. [1/1]
PD#SWPL-7465
Problem:
1.bus crash
Solution:
1. add debug info only for tl1;
2. increase protection for unreg;
Verify:
x301
Change-Id: I84c0058bc22310f87407de1bf56f7a5eb92fd2ed
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Yong Qin [Tue, 23 Apr 2019 09:33:09 +0000 (17:33 +0800)]
di: when src size change, post ready size not right [1/1]
PD#OTT-2650
Problem:
Play local video, when source window size change,
flashing occur. about two frame is not right
Solution:
There have a bug when source window size change, current
frame width was copied to post ready frame. so every
frame backup width saved in to current frame private buffer.
Verify:
TL1
Change-Id: I1b82dcfcfaeffaad6b28a7871014e12f0d157004
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Fri, 12 Apr 2019 02:13:35 +0000 (10:13 +0800)]
di: change clkb frq from 500 to 667 for tl1 [1/1]
PD#SWPL-6762
Problem:
di clkb frq is not right
Solution:
change from 500 to 667
Verify:
tl1
Change-Id: I9242fec37f7527203d1d00cbcdfb79c4f09e9595
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Wenfeng Guo [Tue, 16 Apr 2019 08:06:37 +0000 (16:06 +0800)]
di: fix TL1 cave video 1080i 60hz have drawing [1/1]
PD#SWPL-7006
Problem:
TL1 cave video 1080i 60hz have drawing.
Solution:
dark scenes don't into pulldown32 by vlsi yanling
Verify:
TL1
Signed
Change-Id: Ib77c0f99940c416943baa9b9a8a02a059b274e5b
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Yong Qin [Thu, 28 Feb 2019 03:24:59 +0000 (11:24 +0800)]
vpp: support the interlace format from vdin afbc [1/2]
PD#SWPL-5205
Problem:
Now vdin support afbc+interlace format
Solution:
In vpp, add case to support vdin afbc with interlace
Verify:
tl1_x301, verify pass
Change-Id: I6540b03a6cb5308fc2bc202069aa87234fd35df6
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
a6973fc di: small window bottom of the screen no video [1/1]
fed45cd di: small window bottom of the screen is blank [1/1]
fb34727 deinterlace: fix tl1 in 1080i has small sawtooth [1/1]
66bdbe7 di: bringup for tm2 [1/1]
13ebe46 di: monkey test di cause crash [1/1]
2c8ed09 di: "DI: di_init_buf vmap fail" is seen when power on [1/1]
7ba6477 di: av to dtv , black screen [1/1]
5970920 di: The last frame of the video flash garbage [1/1]
8c3e98d di: flash green when play 265 SD video [1/1]
975c0ee di: exit play local 4k video flashing [1/1]
edc1970 di: pretect reg unreg flow [1/1]
030872b di: 1080p,the screen display anormal [1/1]
3f4854e di: support the interlace format from vdin afbc [2/2]
89a190a vpp: support the interlace format from vdin afbc [1/2]
di: support the interlace format from vdin afbc [2/2]
PD#SWPL-5205
Problem:
support afbc from vdin and decoder on tl1
Solution:
1.add this function
2.support from vdin and decoder
Verify:
tl1
Change-Id: I258d40ad5706f4a9a5749298dd9a33a9b4bbafa2
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: 1080p,the screen display anormal [1/1]
PD#SWPL-5874
Problem:
1080p the screen display anormal
Solution:
compress mode, modify vdin frame type.
Verify:
tl1
Change-Id: Ic1ee1472105861c8debce2a1645f70ed617fd132
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: pretect reg unreg flow [1/1]
PD#SWPL-4918
Problem:
when reg unreg event called too fast, di cause system crash
Solution:
pretect reg and unreg flow
Verify:
tl1
Change-Id: I9b3e28c2b0b709d4f53f60b1f044a390933117ce
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: exit play local 4k video flashing [1/1]
PD#SWPL-5877
Problem:
1.afbc mode, play h.265 local video, when exit playing,
screen will flashing sometimes.
2.when exit playing, there cost 5s time.
Solution:
4k video di bypass, afbc hw module used by vpp, when
DI unreg, needn't to disable AFBC moudule.
Verify:
tl1
Change-Id: I2ac66a145a009042d286dda50e7259657f4bfc8e
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: flash green when play 265 SD video [1/1]
PD#SWPL-6097
Problem:
flash green garbages when play h.265 SD video
Solution:
afbc input not enable
Verify:
tl1
Change-Id: I310eeb6d922ab8b9035c815afc4e967c0e5390ff
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: The last frame of the video flash garbage [1/1]
PD#SWPL-6070
Problem:
flash garbages when unreg process.
Solution:
can't speed down the clkb rate, there is a mirror mode
Verify:
tl1
Change-Id: I5fcc29a1cda196992a457f40fee31992f4bc1528
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: av to dtv , black screen [1/1]
PD#SWPL-6096
Problem:
from local av switch to dtv,black screen,then search channel
Solution:
revert the modification "62617"
Verify:
tl1
Change-Id: I49ae627b9f0b1f6a776e5cbffc723a43e85cee72
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: "DI: di_init_buf vmap fail" is seen when power on [1/1]
PD#SWPL-5908
Problem:
execute vmap when di reserved memory is disable
Solution:
skip memory calculation in init buf while using cma
Verify:
verified by t962x2_x301
Change-Id: Ib0c2e422f61f2b4182109cb7bbb3107029363ce0
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
di: monkey test di cause crash [1/1]
PD#SWPL-6133
Problem:
monkey test di cause crash,when is di reg processing, unreg event
attach, and released the di buffer, so cause crash.
Solution:
every unreg event received, need waitting reg process had done.
Verify:
tl1
Change-Id: I2f2bb068ed65ab14ab4f09de96b64d7290da5914
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: bringup for tm2 [1/1]
PD#SWPL-6575
Problem:
chip bring up
Solution:
1.add tm2 chip id for tm2
2.add h scaling down function for tm2
Verify:
tm2
Change-Id: I364d7c07be331d81ef546357445225c6071f8e3c
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
deinterlace: fix tl1 in 1080i has small sawtooth [1/1]
PD#SWPL-4072
Problem:
tl1 1080i in some dark scenes and roller coasters
have small sawtooth
Solution:
adjust a set of registers with special motion
Verify:
tl1
Change-Id: Idbe62e823f1c6c683b67d000978de1862c8e3162
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
di: small window bottom of the screen is blank [1/1]
PD#TV-4708
Problem:
small window, bottom of the screen is covered by
blank on the online video
Solution:
vline is odd, mif out is not right
Verify:
verify on TL1
Change-Id: I39eb0cdfd2f4b200a09a9c8b779f509caf6dea37
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
di: small window bottom of the screen no video [1/1]
PD#TV-4708
Problem:
small window,v scaling mode, bottom of the screen is no video.
Solution:
vline is odd, mif out is not more enouth
Verify:
verify on TL1
Change-Id: I2ac35af3632e8b14df5c773b322d4b2d64b050ba
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Xuhua Zhang [Fri, 16 Nov 2018 06:23:10 +0000 (14:23 +0800)]
tvin: vdin: tl1 improve vdin afbce function [1/1]
PD#172587
Problem:
vdin afbce can not work well
Solution:
change afbce work mode
Verify:
verify on tl1
Change-Id: I3e980c7488bd8a0eb6f043fd1fb2d2b2bc75140f
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
8adc242 tvafe: add control for tvconfig snow config [1/1]
190d82f cvbs: cvbsoutput support for tl1 [1/1]
3e859c8 vdin: add dolby mem release protection [1/1]
ba57ce5 vdin: G12A color space error when capture screen by post blend
[1/1]
768c100 vdin: add new interface for passing dma-buf to vdin [1/1]
f24b329 vdin: QD980 HDMI 4k 30Hz,change bit depth has green screen [1/1]
a8c6962 vdin: add afbce reg access protection [1/1]
874fe722 vdin: support afbc/non-afbc switch dynamically [1/1]
321d0bc vdin: revert ignore v4l2start/stop ioctl when vdin1 used for
preview [1/1]
05df311 vdin: disable afbce under 4k resolution [1/1]
3038cb8 vdin: recycle garbage frame for afbc mode [1/1]
fbb84a75 vdin: support dynamic dest_cfmt changing [1/1]
81c1e14 vdin: ignore v4l2start/stop ioctl when vdin1 used for preview [1/1]
bab3adb tvafe: add av/atv/cvbs support for tm2 [1/1]
2c05842 vdin: add vdin support for tm2 [1/1]
5a825f1 vdin: config vdin mif/afbc path directly [1/1]
3cb9517 vdin: sync vdin0 & vdin1 buffer for afbc mode to avoid garbage
screen [1/1]
d1f8149 vdin: fixed the issue of mem mapping from vmap. [1/1]
0b049e1 vdin: add sm1 support [1/1]
bfc5e18 vdin: fix vdin1 dest_cfmt for tl1 afbc preview support [1/1]
ded6424 tvin: vdin: add vdin1 scaler preview for vdin0 preview [1/1]
b23ca7b vdin: optimize game mode for tl1 phase lock [1/1]
2a95ff7 vlock: add phase lock function [1/1]
51822f9 vlock: screen flash after PAL NTSC swich [1/1]
315f6d3 vlock: vlock for tl1 [1/1]
7f3b8d9 vdin: fix snowflake bottom screen [1/1]
c2a4eaf tvafe: optimize stable time on manual setting [1/1]
c05cefd tvin: vdin: add interface to get signalinfo [1/1]
5c5d26c tvin: vdin: fix vdin histgram error on tl1 [1/1]
7c0701b tvin: vdin: fix dolby vision memory free print error [1/1]
a510d76 tvin: vdin: fix system crash when dolby vision enable [1/1]
2f1ba00 vdin: add vdin1 histgram [1/1]
f5abdd8 tvin: vdin: fix TXLX ATv channel switching crash [1/1]
8d1a496 vdin: tl1: add viu loop back vpp path [1/1]
63f1b85 tvin: vdin: add vdin afbce memory power ctrl [1/1]
211b677 hdmirx: add allm mode. [1/2]
2afb3d7 tvafe: fix black border for atv [1/1]
ced9632 tvin: vdin: fix afbce 576p color anomaly [1/1]
f00295ae tvin: vdin: fix afbce 4k yuv444 display error [1/1]
1fef799 tvin: vdin: vdin add afbce write back to memory interface [1/1]
482e11b tvin: vdin: fix vdin CMA layout adaptation [1/1]
87d67d8 tvin: vdin: vdin afbce fix header size bug [1/1]
f938eed vdin: optimize game mode process [1/1]
6e847e0 tvin: vdin: hdmirx format change, display exception [1/1]
4c7bb63 tvin: vdin: tl1 improve vdin function [1/1]
8850ab8 tvin: vdin: tl1 improve vdin afbce function [1/1]
tvin: vdin: tl1 improve vdin function [1/1]
PD#172587
Problem:
1.in the afbce mode,
screen flicker when serial port print too many debugging information
2.vdin afbce 4K crash
3.viu loop back error
4.need afbce lossy mode
Solution:
1.vdin use rdma mode
2.change vdin afbce buff size
3.change VDIN_ASFIFO_CTRL3 register
4.add lossy mode
Verify:
x301
Change-Id: Id66c0d7df22a9aeaca15d645f9a2ce0ecf47be3f
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
tvin: vdin: hdmirx format change, display exception [1/1]
PD#SWPL-2411
Problem:
hdmirx input 4096X2160 yuv422 in a short period of time,
formate change form yuv422 to yuv444, screen display is exception.
Solution:
force malloc yuv444 size
Verify:
Verify on txlx r311
Change-Id: Ie670b9a2b0c1eceffe423a1cf8606e78b6b347cd
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
vdin: optimize game mode process [1/1]
PD#SWPL-2145
Problem:
HDMI Rx Video path display latency of Game mode and Normal mode
Solution:
optimize game mode
Verify:
T962X-R311
Change-Id: Ib0a41915dfb088495c976d56ab812f90e31602f4
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
tvin: vdin: vdin afbce fix header size bug [1/1]
PD#SWPL-3208
Problem:
vdin afbce scaler, display abnormal.
Solution:
fix afbce header size problem.
Verify:
TL1 X301
Change-Id: I461b4aa809ceddbe18cf7f6f49e8152b43b86076
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix vdin CMA layout adaptation [1/1]
PD#SWPL-2526
Problem:
1.CMA layout adaptation cause crash
2.vdin buff dump error
3.read_pic error
Solution:
1.codec mm has be moved to high memory area,
we should map memory use vmap.
2.make vdin high mem and low mem to be compatible
when we dump vdin buff.
3.fix read_pic bug.
Verify:
TXLX R311
Change-Id: I90e4f46ba91d38c6ce0f8bfd65b5c22e6be3b83f
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: vdin add afbce write back to memory interface [1/1]
PD#SWPL-3200
Problem:
vdin add afbce need more debug method.
Solution:
vdin add read_pic_afbce debug interface
Verify:
TL1 X301
Change-Id: I45a741ba20409dc25b41ce316b0df0dce9d2dc28
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix afbce 4k yuv444 display error [1/1]
PD#SWPL-3429
Problem:
vdin output format is afbce 4k yuv444,it display ghost shadow of image
Solution:
add afbce comb control
Verify:
x301
Change-Id: I168f13994a4929bd227ba70b006f259ac0726238
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix afbce 576p color anomaly [1/1]
PD#SWPL-3424
Problem:
dvd play 576p media, tl1 display color anomaly
Solution:
encoder use same default color setting with decoder
Verify:
x301
Change-Id: I8954874ea048b2d9e9b7aa58c883da1f306c4459
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvafe: fix black border for atv [1/1]
PD#SWPL-3573
Problem:
appear black border after unplug/plug signal
Solution:
reset de when nosignal
restore acd hsync when signal unstable
Verify:
verified by x301
Change-Id: Ia9e2e9dfb326061bd3b9b6f9a02be0d935cdf06f
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
hdmirx: add allm mode. [1/2]
PD#SWPL-1619
Problem:
need support allm mode
Solution:
add allm mode
Verify:
None
Change-Id: I34d05cfbef4b3fccbbb7c6b35fa613cda9b9cf36
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
tvin: vdin: add vdin afbce memory power ctrl [1/1]
PD#SWPL-3635
Problem:
Miss vdin afbce memory power ctrl.
Solution:
Add vdin afbce memory power ctrl.
Verify:
x301_tl1
Change-Id: I94946e3d16027083688735d68b9d023b6bc5c8bf
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
vdin: tl1: add viu loop back vpp path [1/1]
PD#SWPL-2676
Problem:
tl1 viu loop back error
Solution:
add viu loop back vpp path
Verify:
TL1 X301
Change-Id: I4069f6bbd6672d89bd93a0c8b275cfffc273c427
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix TXLX ATv channel switching crash [1/1]
PD#SWPL-3964
Problem:
ATv channel switching crash
Solution:
stop vdin, close afbc
need judge platform, there is not afbce on txlx
Verify:
verify by einstein
Change-Id: Ibcff1da47b9fdca7e1758b0d45e7d6800bfc8080
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
vdin: add vdin1 histgram [1/1]
PD#SWPL-3059
Problem:
vdin1 hisgram and screencap cannot be used simultaneously
Solution:
add vdin1 histgram,and make hist and screencap function to be compatible
Verify:
txlx r311
Change-Id: I759d1cdc69d59015ce845898990088eb6943cc41
Signed-off-by: xuhua zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix system crash when dolby vision enable [1/1]
PD#SWPL-3353
Problem:
system crash when dolby vision enable
Solution:
32bit kernel,phy addr to virt interface is changed
Verify:
Verified on txlx R311
Change-Id: Ie012bdaf7f9dc24acf7a7e03f0db056ff31e578c
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix dolby vision memory free print error [1/1]
PD#SWPL-3353
Problem:
dolby vision memory free print error
Solution:
dolby vision memory has been free by vdin_cma_release,
don't free again.
Verify:
test pass on R311
Change-Id: Id7108cf17260430c53dff707e843ed7833c8ee7c
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: fix vdin histgram error on tl1 [1/1]
PD#TV-2263
Problem:
vdin histgram error on tl1
Solution:
tl1 use TVIN_PORT_VIU1_WB0_VPP
Verify:
verify on tl1
Change-Id: I225a85a1debee0e8c42f60751524661fc5c986bd
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvin: vdin: add interface to get signalinfo [1/1]
PD#TV-2083
Problem:
TVIN_IOC_G_SIG_INFO not complete enough
Solution:
add interface to get signalinfo
Verify:
Verify on TL1
Change-Id: I32f198f14dfcc1f8a8ee1f19c4065bd7d4d5dccc
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
tvafe: optimize stable time on manual setting [1/1]
PD#SWPL-5052
Problem:
optimize swith channel time
Solution:
lower wait time on manual colorfmt setting
stable time optimized from 500ms -> 300ms
Verify:
x301
Change-Id: I7e7d711d1c3ab0630d41e933c53ce34d0025e860
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
vdin: fix snowflake bottom screen [1/1]
PD#SWPL-5129
Problem:
cut window need restore when nosignal
Solution:
restore cutwin when nosignal
Verify:
verified by r341
Change-Id: If18dbd18df11cce5d1ddb99ee266901b75b065b3
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
vlock: vlock for tl1 [1/1]
PD#SWPL-3129
Problem:
1.verify manual pll mode
2.modify vlock hiu register access api
3.add a new fsm for tl1 test
4.add chip match data
Solution:
add function for tl1
Verify:
verified on tl1
Change-Id: I75f8d2a40437056135f8dd0fb241016a9ea680df
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vlock: screen flash after PAL NTSC swich [1/1]
PD#SWPL-4246
Problem:
the screen always flash after switch PAL to NTSC in AVin
Solution:
do not change pll M value, M value will case v by one fail
Verify:
verified on tl1 android p
Change-Id: Ib5ea8dfef1c40af5535e69fdc9241a7f77b4a7dd
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
vlock: add phase lock function [1/1]
PD#SWPL-3644
Problem:
new feature on tl1
Solution:
add function
Verify:
verified on tl1 android p
Change-Id: I964054512f59a98f03d20df11b8c63d6802744d5
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
vdin: optimize game mode for tl1 phase lock [1/1]
PD#SWPL-4788
Problem:
sometimes hdmi source display broken in game mode
Solution:
use phase lock for tl1 game mode ahead 2 frames,
and ahead 1 frame for previous chips.
Verify:
x301
Change-Id: I00df9125c9ea7869ed6e111ba99a8b755c914129
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
tvin: vdin: add vdin1 scaler preview for vdin0 preview [1/1]
PD#SWPL-4115
Problem:
vdin preview error when input 4K
Solution:
use vdin1 as double write function
Verify:
x301
Change-Id: I4ed15dd5c445ed3c38b4a2535be075210dcbdac7
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>
vdin: fix vdin1 dest_cfmt for tl1 afbc preview support [1/1]
PD#SWPL-5971
Problem:
preview window color is green with 1080p & 4k hdmirx
Solution:
vdin1 dest_cfmt follow vdin0 for the software double write for preview
Verify:
x301
Change-Id: I2e45b5f838cddcac1ca1c4e6710a7cc1f45ae9b5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: add sm1 support [1/1]
PD#SWPL-6065
Problem:
need add vdin support for sm1
Solution:
add vdin support for sm1
Verify:
pxp
Change-Id: I55af5273607a88f4e5a2394de0acbb44811da8f9
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: fixed the issue of mem mapping from vmap. [1/1]
PD#SWPL-6196
Problem:
the memory issue cause to kernel crash.
Solution:
1. add flush cache when the mem oper end.
2. unmap addr which from vmap in vdin driver.
Verify:
X301
Change-Id: Id6efe2b009fe64ad753d51eb06784bd4e66f5e87
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
vdin: sync vdin0 & vdin1 buffer for afbc mode to avoid garbage screen [1/1]
PD#SWPL-3431
Problem:
enter hdmi 4k port will flash garbage screen with afbc mode
Solution:
sync vdin0 & vdin1 buffer for afbc mode
Verify:
x301
Change-Id: I443a9be2ed619a5cd2b6229f15814d8b856c5535
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: config vdin mif/afbc path directly [1/1]
PD#SWPL-6277
Problem:
switch hdmi port maybe display green screen
Solution:
1.optimize vdin stop sequence, reduce afbc state polling interval,
and rest afbc to get a clean state
2.change vdin mif/afbc patch directly, not rdma method,
for vdin0/1 rdma are independent
Verify:
x301
Change-Id: I0ddf5d27dcfc0fd930eeb681f876c4c5e92e8d70
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: add vdin support for tm2 [1/1]
PD#SWPL-6701
Problem:
Need vdin supprt for sm2
Solution:
add vdin support for tm2
Verify:
test pass on tm2 ab311
Change-Id: I57d7b3014938011d18c5e168f18c78e4fa542fc7
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
tvafe: add av/atv/cvbs support for tm2 [1/1]
PD#:SWPL-6702
Problem:
tm2 bringup
Solution:
add av/atv/cvbs support for tm2
Verify:
tm2 T962E2
Change-Id: I1c7358cd17463843fbdd7a93c7416a22aaa2387c
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vdin: ignore v4l2start/stop ioctl when vdin1 used for preview [1/1]
PD#SWPL-6840
Problem:
hdmi port can't screencap
Solution:
ignore v4l2start/stop ioctl when vdin1 used for preview
Verify:
x301
Change-Id: I26e7b057177a0b7ed203c04bd3008c2a34793b4a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: support dynamic dest_cfmt changing [1/1]
PD#TV-4306
Problem:
vdin afbc will show green screen when hdmirx change dest_cfmt after stable
Solution:
dynamic config vdin afbc with cfmt
Verify:
x301
Change-Id: I404c47934f090222a2cdd7cf98b619826cd92cc7
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: recycle garbage frame for afbc mode [1/1]
PD#TV-4335
Problem:
switch tvin signals will flash garbage screen
Solution:
recycle barbage frame for afbc mode
Verify:
x301
Change-Id: I17c13b5db7a506403aa5ac74568b7a9e16c075c0
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: disable afbce under 4k resolution [1/1]
PD#SWPL-7511
Problem:
no need enable vdin afbce under 4k,
it is no help for bandwidth with these resolution
Solution:
only enable vdin afbce for 4k resolution
Verify:
x301
Change-Id: I283efd872004846d158ef6c9addbd1e666d2f61a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: revert ignore v4l2start/stop ioctl when vdin1 used for preview [1/1]
PD#SWPL-7324
Problem:
tvafe work abnormal when use vdin1 preview
Solution:
revert the previous commit for v4l2start/stop
Verify:
x301
This reverts commit
81c1e1449c5e7362dc263bea76e134ba8fd25265.
Change-Id: I8cdefececb8b01cb86426684a6c700bc9bf8b615
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: support afbc/non-afbc switch dynamically [1/1]
PD#SWPL-7512
Problem:
need switch vdin afbc/non-afbc mode sometime
Solution:
support afbc/non-afbc switch dynamically
Verify:
x301
Change-Id: I08433938f169a51ed1ed7a23fd99f3ba42e076fe
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vdin: add afbce reg access protection [1/1]
PD#SWPL-7983
Problem:
txlx will crash when access afbce reg without afbce hw
Solution:
add afbce reg access protection
Verify:
r311
Change-Id: Iaabf8da9cb2a58e9c26626b9ac718bdf9c6a2ac3
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
vdin: QD980 HDMI 4k 30Hz,change bit depth has green screen [1/1]
PD#SWPL-8184
Problem:
don't updated afbce output color format
Solution:
update afbce config according afbce support or not,
instead of afbce need or not.
Verify:
verified by t962x2_x301
Change-Id: I7885357c1e5b04b58b059401a5f66d2ee83c76ef
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
vdin: add new interface for passing dma-buf to vdin [1/1]
PD#TV-3863
Problem:
gpu cann't get vdin buf directly
Solution:
vdin write data to the addr passed by upper layer
Verify:
verified by t962x2_x301
Change-Id: I495b78c419e10a6dacb9b9f29c0f8e87339ac195
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
vdin: G12A color space error when capture screen by post blend [1/1]
PD#SWPL-8335
Problem:
color space setting error
Solution:
set yuv444 when use viu1 post blend port
Verify:
verified by t962x2_x301
Change-Id: Ic92a6db92f6cec64084d140c5f505489579b294f
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
vdin: add dolby mem release protection [1/1]
PD#SWPL-8797
Problem:
sometime oops occurred for vdin_dolby mem release
Solution:
add vdin dolby mem alloc flag & release protection
Verify:
x301
Change-Id: Iee90b58a0624c32032e204adcd043c8e94d03f1f
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
cvbs: cvbsoutput support for tl1 [1/1]
PD#172587
Problem:
no cvbsoutput
Solution:
add cvbsoutput
Verify:
test pass on x301
Change-Id: I92f70d26e32f95de7c63ddbac9fe6664063c1902
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
tvafe: add control for tvconfig snow config [1/1]
PD#SWPL-5985
Problem:
display snow when snow config disabled
Solution:
add control for tvconfig snow config
Verify:
verify it on x301
Change-Id: I3466efc98577f2403f3a6cd638ad7dbf70ce34dc
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
zhiwei.yuan [Thu, 28 Feb 2019 07:30:09 +0000 (15:30 +0800)]
di: TL1 enable lmv_lock_win_en cause crash [1/1]
PD#SWPL-4999
Problem:
use vmalloc in interrupt context
Solution:
move di_map to cma allocate function(kernel thread)
Verify:
verified by t962x2_x301
Change-Id: I8cf8d9caf9703ba039b32da98d2382a4c875de30
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Wenfeng Guo [Wed, 20 Feb 2019 08:20:10 +0000 (16:20 +0800)]
deinterlace: fix 480i error into pulldown [1/1]
PD#TV-1949
Problem:
480i error into pulldown (by yanling)
Solution:
1. add flm22_comlev3 (by yanling);
Verify:
tl1 txlx
Change-Id: Ib5c168deb1327df0e803831dcf9f13e05faaa915
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Jihong Sui [Tue, 18 Dec 2018 13:56:38 +0000 (21:56 +0800)]
deinterlace: pq: adjust pulldown setting for tl1 [1/1]
PD#SWPL-3182
Problem:
1.VLSI(Feijun) fine-tune pulldown setting for TL1, G12A/B;
2.fine tune combing_glbmot_radprat by VLSI(yanling.liu);
Solution:
finetune setting.
Verify:
tl1
Change-Id: Ie65cec8b216752600dfd54ee6be5302150282774
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
shanghai engineers [Mon, 25 Mar 2019 02:11:00 +0000 (22:11 -0400)]
TM2: add chip id and name for tm2 [1/1]
PD#SWPL-6157
Problem:
TM2 bring up need to update chip version name and id
Solution:
add the chipid and chip version name at dts and help file
Verify:
on ptm board4
Change-Id: I37e44828db1821c7fd2921c3e4271a27bd715b88
Signed-off-by: pan yang <pan.yang@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Evoke Zhang [Wed, 15 May 2019 02:10:45 +0000 (10:10 +0800)]
vout: add vout2 init mode support [1/1]
PD#TV-5428
Problem:
need viu2 display support
Solution:
add vout2 init mode support
Verify:
u200
Change-Id: Ibd9d2a07645645d739d7421ceafd386caf3066d7
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Kaifu Hu [Thu, 10 Jan 2019 07:14:49 +0000 (15:14 +0800)]
hdmi: support 1440x2560p60hz modes [1/1]
PD#IPTV-1032
Problem:
Need support 1440x2560p60hz
Solution:
Porting VESA code and 1440x2560p60hz
Verify:
g12b/w400
Change-Id: I3cf38bebc29b76aed50fe2ced7b47e27f2d1af06
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Luan Yuan [Thu, 30 May 2019 06:22:18 +0000 (14:22 +0800)]
dts: change codec mm size to 192M. [1/1]
PD#SWPL-9156
Problem:
memory overread error
Solution:
fixed play movie error
Verify:
verify by ac202/u202
Change-Id: I15e459a4fe044b02a5e958293c1516f8b7795096
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Laura Abbott [Mon, 3 Apr 2017 18:57:48 +0000 (11:57 -0700)]
staging: android: ion: Call dma_map_sg for syncing and mapping [2/2]
PD#SWPL-9254
Problem:
uncached display unexpectly.
Solution:
Technically, calling dma_buf_map_attachment should return a buffer
properly dma_mapped. Add calls to dma_map_sg to begin_cpu_access to
ensure this happens. As a side effect, this lets Ion buffers take
advantage of the dma_buf sync ioctls.
Verify:
galilei, franklin
Change-Id: Ib6ca06e59e81031d3c65c2df8824b46baaba6c9f
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Laura Abbott [Mon, 3 Apr 2017 18:57:47 +0000 (11:57 -0700)]
staging: android: ion: Duplicate sg_table [1/2]
PD#SWPL-9254
Problem:
Ion currently returns a single sg_table on each dma_map call. This is
incorrect for later usage.
Solution:
dup sg table on each dma_map call
Verify:
galilei, franklin
Change-Id: I6df2baa33bba9303b2ac25210ebaf56a337d56a2
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
jintao xu [Fri, 31 May 2019 06:33:13 +0000 (14:33 +0800)]
pipvideo: fix cur_pipbuf not set to NULL when disable video before unreg [1/1]
PD#OTT-4262
Problem:
When disable video before unreg, cur_pipbuf will not set to NULL.
Next time playback will tog this buffer.
Solution:
Free cur_pipbuf when vd2 is closed in unreg.
Verify:
U212
Change-Id: Ie381ae9feda8a5d23a93b3a5974d9c0af87e6d6e
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
Shunzhou Jiang [Tue, 14 May 2019 01:47:43 +0000 (09:47 +0800)]
clk: sm1: add sm1 dsu clk notify for change dsu freq [1/1]
PD#SWPL-8145
Problem:
dsu clk can't change freq
Solution:
add sm1 dsu clk notify
Verify:
sm1_skt
Change-Id: If3ecf1066b49c07e6af69ce342956cb0469a5f87
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
shuanglong.wang [Mon, 3 Jun 2019 01:56:30 +0000 (09:56 +0800)]
video: clear pcr in video stop [1/1]
PD#SWPL-6903
Problem:
pcr increase automatic after system reset
Solution:
in non-tunnel mode, only after video stop post will adjust pcr
in omx_secret_mode. Also clear pcr in video stop
Verify:
verify by nts
Change-Id: I528229e8121a99e50c7b8313bd8dc867e3710ad8
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Luan Yuan [Mon, 3 Jun 2019 02:51:56 +0000 (10:51 +0800)]
dts: add dts config for P281. [3/3]
PD#SWPL-9298
Problem:
add dts config for P281
Solution:
add dts config for P281(from P212)
the difference as follows:
framebuffer from 1080p to 720p
gpu max freq from 750 to 666
Verify:
verify by p281
Change-Id: Ice6bcbd11fd831daeb6620d1780628494c8a10fa
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Nick Xie [Mon, 5 Aug 2019 06:41:54 +0000 (14:41 +0800)]
arm64: dts: VIM3: emmc: change emmc busmode from hs400 to hs200
Signed-off-by: Nick Xie <nick@khadas.com>
Ruixuan Li [Mon, 3 Jun 2019 11:19:03 +0000 (19:19 +0800)]
emmc: change emmc busmode from hs400 to hs200 [1/1]
PD#SWPL-9326
Problem:
hs400 200M not stable on some platform
Solution:
modify dts to hs200 mode
Verify:
passed on g12b_revb tl1 sm1 tm2
Change-Id: I45670c979b62a2caeed1e7ebc35b035bbbf8968c
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
ruixuan.li [Tue, 2 Apr 2019 03:11:56 +0000 (11:11 +0800)]
tm2: emmc run hs200 busmode [1/1]
PD#SWPL-5658
Problem:
emmc run high speed now
Solution:
modify dts
Verify:
passed on t962e2_ab319
Change-Id: Iedef30bed9547e7f57c883077462f1762c55fda3
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
long yu [Mon, 25 Mar 2019 09:46:07 +0000 (17:46 +0800)]
emmc: backward compatible with all HS400 clock sources [1/1]
PD#SWPL-6294
Problem:
TL1 and G12B uses clkin3,TXLX uses clkin2
Solution:
unifying the HS400 source clock name in DTS
Verify:
TL1-T962X2_X301 G12B-Reva G12B-Revb
Change-Id: I7acaf7b4392d757955f43a0b17ac1fad84f53d26
Signed-off-by: Long Yu <long.yu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Ruixuan Li [Tue, 21 May 2019 11:32:48 +0000 (19:32 +0800)]
emmc: modify the emmc device driver strength to type 0 [1/1]
PD#SWPL-8806
Problem:
the driver strength is type 1 on sm1
Solution:
modify sm1 dts
Verify:
passed on sm1_ac213
Change-Id: Iea5093541dc0bbd08954e78827309a45a84efc60
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
ruixuan.li [Tue, 2 Apr 2019 12:37:38 +0000 (20:37 +0800)]
tm2: emmc run hs400 200M [1/1]
PD#SWPL-5658
Problem:
emmc run hs200 200M now
Solution:
set emmc busmode to hs400 200M
Verify:
passed on t962e2 ab311
Change-Id: If5fef5c3b55cc95152b0d5d19bb5a56b293aafcf
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
jintao xu [Fri, 24 May 2019 09:38:42 +0000 (17:38 +0800)]
videosync: support omx_version 3 [2/2]
PD#OTT-4036
Problem:
1.Pip path seek block.
1.playback blaock
Solution:
1.videosync support omx_version 3.
2.add pts discontinue set
Verify:
Verify on franklin.
Change-Id: I67d23a8878b1493fceb8e4f0b27598413af96e1f
Signed-off-by: jintao xu <jintao.xu@amlogic.com>
chengwang [Mon, 27 May 2019 11:46:15 +0000 (19:46 +0800)]
amvecm: HDR10+ vsif informaton confirmation [1/1]
PD#SWPL-8250
Problem:
1 check my patch to Mingliang on trunk
2 980 check vsif and frame timing confirm if vsif is one frame ahead
or not
Solution:
The data is the same as the standard of SPEC.
Verify:
on x301
Change-Id: I39ea8cb5d84c8b5b15109ed65f2428a4ec2c6c68
Signed-off-by: chengwang <cheng.wang@amlogic.com>
Jian Cao [Fri, 17 May 2019 14:39:59 +0000 (22:39 +0800)]
ge2d: add option for rgb_to_yuv to 709 or 601 [1/1]
PD#OTT-3711
Problem:
color parameters are wrong
while displaying images on NativeImagePlayer
Solution:
add a macro BT_STANDARD for 709 or 601
Verify:
verified on W400
Change-Id: I0703ef17748c8267b86e85a4366cac88d3e41ee1
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Zongdong Jiao [Thu, 30 May 2019 12:08:41 +0000 (20:08 +0800)]
hdmitx: edid: add suitable case for DolbyVision [1/1]
PD#SWPL-7888
Problem:
DV tests add more EDID cases
v2_yuv444_2_yuv422_0_int_3_12Byte.xml
v2_yuv444_0_yuv422_0_int_2_13Byte.xml
v2_yuv444_0_yuv422_0_int_2_16Byte.xml
Solution:
add suitable case for DolbyVision
Verify:
G12/U212
Change-Id: I323d49ad34b12b6a12ba93f0349f0398f2516bcb
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Jian Cao [Sat, 30 Mar 2019 11:25:18 +0000 (19:25 +0800)]
osd: add osd TM2 support [1/1]
PD#SWPL-6558
Problem:
bring up osd for TM2
Solution:
osd: add osd TM2 support
Verify:
Verfied on TM2 skt board
Change-Id: I2183bd1f60793baf947c303b6d456e8c69d104ac
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Evoke Zhang [Wed, 22 May 2019 05:50:13 +0000 (13:50 +0800)]
cvbsout: add NTSC_M mode support [1/1]
PD#OTT-3953
Problem:
need ntsc_m mode support
Solution:
add NTSC_M mode support
Verify:
u200
Change-Id: I446862a1b9405c7acc4845d1d9116492c3e0ecca
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
yao liu [Wed, 22 May 2019 09:38:13 +0000 (17:38 +0800)]
dolby: set gmax for LL mode [1/1]
PD#SWPL-8799
Problem:
HDR-001-TC3 GXF is brighter than VID in LL mode
Solution:
dolby_vision_target_graphics_L for LL mode
Verify:
verified on u212
Change-Id: I3b39ec048bfff3d8ae797702c1c783356d59e604
Signed-off-by: yao liu <yao.liu@amlogic.com>
yao liu [Wed, 8 May 2019 13:55:45 +0000 (21:55 +0800)]
dolby: set dovi gmax/pmax [1/1]
PD#SWPL-8159
Problem:
Default graphics is always 100nit,
need to set different nits for SDR/HDR/DV TV
Solution:
dolby_vision_target_graphics_max[] for DV/HDR/SDR;
dolby_vision_target_max[][] for video_max;
module param dolby_vision_target_max for force graphics max
when set it to non-zero;
Verify:
verified on sm1
Change-Id: If6f5ae4ffb37629b51d21764302689da776e9f7f
Signed-off-by: yao liu <yao.liu@amlogic.com>
Yi Zhou [Wed, 17 Apr 2019 02:48:00 +0000 (10:48 +0800)]
dv: fix black screen when connecting dv TV [1/1]
PD#SWPL-7778
Problem:
black sreen when connecting dv TV
Solution:
close post matrix
open tm2 dv flag
Verify:
T962E2
Change-Id: I828b32d7bf2ef35c3f236ad9bf15964272d06dd2
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Yi Zhou [Fri, 12 Apr 2019 13:04:03 +0000 (21:04 +0800)]
dv: add polling interface for systemcontrol [1/1]
PD#SWPL-6338
Problem:
add polling interface for systemcontrol
Solution:
add polling interface for systemcontrol
Verify:
tm2
Change-Id: I1a0a9a3028592ee0df77b33c9c617cbdd9b07d70
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yi Zhou [Thu, 11 Apr 2019 07:03:06 +0000 (15:03 +0800)]
dv: fix error color when playing dv films with EL under tm2 platform [1/1]
PD#SWPL-6338
Problem:
error color when playing dv films with EL under tm2 platform
Solution:
bypass dv core
Verify:
tm2
Change-Id: I477ea5dbdcf2a0af3783aa62200809f2ed89be5e
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yi Zhou [Thu, 14 Mar 2019 08:05:59 +0000 (16:05 +0800)]
dv: add tm2 interface [1/1]
PD#SWPL-6338
Problem:
need to add dv interface in tm2
Solution:
choose dv in UI and play films, observe the video and
graphic
Verify:
ab301 verify ok
Change-Id: I5d85b195254a16bcc9046d258728bd41d8a809d5
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
yao liu [Fri, 26 Apr 2019 12:35:34 +0000 (08:35 -0400)]
dolby: fix Display looks abnormal problem [1/1]
PD#OTT-3006
Problem:
The width and height of DOLBY_CORE2A reg are reversed
Solution:
Setting right width and height for DOLBY_CORE2A
Verify:
raven
Change-Id: I89d1a99d00122179bb35b5853a869819e5d62ac9
Signed-off-by: yao liu <yao.liu@amlogic.com>
shuanglong.wang [Wed, 8 May 2019 02:32:19 +0000 (10:32 +0800)]
video: for beginning playback use small omx_pts_interval_upper [1/1]
PD#SWPL-8545
Problem:
AL1 slope problem
Solution:
for beginning playback, use small omx_pts_interval_upper and
omx_pts_dv_lower to let pcr adjust according to omxpts quickly. Also
omxpts compenstion use sched_clock instead of getimeofday.
Verify:
verify by nts
Change-Id: If9476a9793e3e5da691ea720de78f1c20f01a1e5
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
Gongwei Chen [Fri, 31 May 2019 06:59:10 +0000 (14:59 +0800)]
audio: Speaker has no sound [1/1]
PD#IPTV-3107
Problem:
Speaker has no sound
Solution:
modify dts and
ad82584f
Verify:
Verify by Android P S905D3 AC202
Change-Id: I92ddb6a86b31dcd2c37311a0fc9b1a2cefc29d4e
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Gongwei Chen [Tue, 7 May 2019 12:57:20 +0000 (20:57 +0800)]
common: loudspeaker: adjust for yeke [1/1]
PD#SWPL-8201
Problem:
loudspeaker
ad82584f for yeke.
Solution:
loudspeaker
ad82584f for yeke.
Verify:
S905D2 u202.
Change-Id: I01fe62d207c47283e714937282a0ba24aef1d467
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Hanjie Lin [Thu, 13 Dec 2018 07:28:45 +0000 (15:28 +0800)]
arm: makefile: change text_offset to 0x108000 [1/1]
PD#SWPL-1505
PD#SWPL-8867
Problem:
Amlogic arm kernel text_offset is 0x208000,
ko start address to kernel text end address arrange is too big(>32M)
it can cause insmod ko failed.
Solution:
modify text_offset to 0x108000
first 0x100000 is invisibe to kernel.
Verify:
u200
Change-Id: I9684b108b57a15b03e4279146c1dc57667aa5d12
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Wencai You [Thu, 23 May 2019 12:42:51 +0000 (20:42 +0800)]
thermal: check array index when set cur_state [1/1]
PD#SWPL-8747
Problem:
android.security.sts.Poc17_11#testPocCVE_2017_6264
test echo /sys/devices/virtual/thermal/cooling_device2/cur_state
crash
Solution:
check array index
Verify:
verified by u212
Change-Id: I235d62508d95fffaed7b811ba008384db7c7ec6f
Signed-off-by: Wencai You <wencai.you@amlogic.com>
Hui Zhang [Thu, 16 May 2019 02:45:49 +0000 (10:45 +0800)]
media_module: fix hevc back mmu dmc warnning [2/2]
PD#TV-5832
Problem:
when mmu scatter tail is freed. sometimes sao mmu is not
stopped or in idle. there is potential memory pollution
Solution:
before free unused scatter, to check hw statu idle and
diable sao mmu to avoid hevc back overwrite system memory
Verify:
X301
Change-Id: Ib784809a0946bd0a6c479a98678cb40edacc4118
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
Luan Yuan [Tue, 4 Jun 2019 06:45:11 +0000 (14:45 +0800)]
dts: fixed s905d3 panel compile error. [1/1]
PD#NONE
Problem:
s905d3 panel compile error.
Solution:
remove duplicated prop
Verify:
verify by ac202
Change-Id: Id3f845ffe540392d4f09ef1ed682d3cfb5a54448
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Wenfeng Guo [Wed, 22 May 2019 09:10:18 +0000 (17:10 +0800)]
di: fix image jitter when play DTV 3 channels [1/1]
PD#SWPL-4508
Problem:
image jitter when play DTV 3 channels
Solution:
1.force entry pulldown22
Verify:
tl1
Change-Id: I3d15ec21458fb3a6e3ae0b59910a8f350a3b1d72
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Wenfeng Guo [Fri, 24 May 2019 07:41:26 +0000 (15:41 +0800)]
vdin: fix input secam signal colorbar scale line jitter [2/2]
PD#SWPL-8878
Problem:
input secam signal colorbar scale line jitter
Solution:
setting some register for secam signal
Verify:
tl1
Change-Id: I59c370c2ab3f92c904b506d26022b165d521776c
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Wenfeng Guo [Fri, 24 May 2019 06:15:22 +0000 (14:15 +0800)]
deinterlace: fix input secam signal colorbar scale line jitter [1/2]
PD#SWPL-8878
Problem:
input secam signal colorbar scale line jitter
Solution:
setting some register for secam signal
Verify:
tl1
Change-Id: I0b5e1ea03581893a2b460afadcf682f3ce74b450
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
Jian Xu [Wed, 29 May 2019 12:06:35 +0000 (20:06 +0800)]
audio: auge: fix the samesource spdif clock recovery issue [1/1]
PD#SWPL-3667
Problem:
after playback none-48K raw audio, the spdif clock
is not recoved to 48K when tdm/spdif same source
Solution:
use the same clock source as tdm if samesource and
config that when tdm hardware prepare.
Verify:
AC213
Change-Id: I0d5dc5f51b5de14d155902e0fe72c293071c93ec
Signed-off-by: Jian Xu <jian.xu@amlogic.com>
Gongwei Chen [Wed, 29 May 2019 08:03:16 +0000 (16:03 +0800)]
audio: Speaker has no sound [1/1]
PD#IPTV-3107
Problem:
Speaker has no sound
Solution:
modify dts and
ad82584f
Verify:
Verify by Android P S905D3 AC202
Change-Id: I3dc77e5f0ba6e776b5d5ac4f34de4da9a16ec84d
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
Gongwei Chen [Mon, 27 May 2019 12:04:04 +0000 (20:04 +0800)]
dts: modify for S905D3 ac202 mic and loopback [1/1]
PD#SWPL-8938
Problem:
S905D3 ac202 mic and loopback
Solution:
modify gpio
Verify:
Verify by Android P ac202
Change-Id: Ibfd1711eaae0011af8f69a0fd8b35cf1a335ea8e
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>