hwmon: (vt1211) Use request_muxed_region for Super-IO accesses

[ Upstream commit 14b97ba5c20056102b3dd22696bf17b057e60976 ]

Super-IO accesses may fail on a system with no or unmapped LPC bus.

Also, other drivers may attempt to access the LPC bus at the same time,
resulting in undefined behavior.

Use request_muxed_region() to ensure that IO access on the requested
address space is supported, and to ensure that access by multiple drivers
is synchronized.

Fixes: 2219cd81a6cd ("hwmon/vt1211: Add probing of alternate config index port")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/cstate: Add Icelake support

[ Upstream commit f08c47d1f86c6dc666c7e659d94bf6d4492aa9d7 ]

Icelake uses the same C-state residency events as Sandy Bridge.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-10-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/rapl: Add Icelake support

[ Upstream commit b3377c3acb9e54cf86efcfe25f2e792bca599ed4 ]

Icelake support the same RAPL counters as Skylake.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-11-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/msr: Add Icelake support

[ Upstream commit cf50d79a8cfe5adae37fec026220b009559bbeed ]

Icelake is the same as the existing Skylake parts.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: https://lkml.kernel.org/r/20190402194509.2832-12-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cxgb4: Fix null pointer dereference on alloc_skb failure

[ Upstream commit a6d2a5a92e67d151c98886babdc86d530d27111c ]

Currently if alloc_skb fails to allocate the skb a null skb is passed to
t4_set_arp_err_handler and this ends up dereferencing the null skb.  Avoid
the NULL pointer dereference by checking for a NULL skb and returning
early.

Addresses-Coverity: ("Dereference null return")
Fixes: b38a0ad8ec11 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: vdso: Fix clock_getres() for CLOCK_REALTIME

[ Upstream commit 81fb8736dd81da3fe94f28968dac60f392ec6746 ]

clock_getres() in the vDSO library has to preserve the same behaviour
of posix_get_hrtimer_res().

In particular, posix_get_hrtimer_res() does:

    sec = 0;
    ns = hrtimer_resolution;

where 'hrtimer_resolution' depends on whether or not high resolution
timers are enabled, which is a runtime decision.

The vDSO incorrectly returns the constant CLOCK_REALTIME_RES. Fix this
by exposing 'hrtimer_resolution' in the vDSO datapage and returning that
instead.

Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
[will: Use WRITE_ONCE(), move adr off COARSE path, renumber labels, use 'w' reg]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/IORT: Reject platform device creation on NUMA node mapping failure

[ Upstream commit 36a2ba07757df790b4a874efb1a105b9330a9ae7 ]

In a system where, through IORT firmware mappings, the SMMU device is
mapped to a NUMA node that is not online, the kernel bootstrap results
in the following crash:

  Unable to handle kernel paging request at virtual address 0000000000001388
  Mem abort info:
    ESR = 0x96000004
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000001388] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] SMP
  Modules linked in:
  CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15
  pstate: 80c00009 (Nzcv daif +PAN +UAO)
  pc : __alloc_pages_nodemask+0x13c/0x1068
  lr : __alloc_pages_nodemask+0xdc/0x1068
  ...
  Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
  Call trace:
   __alloc_pages_nodemask+0x13c/0x1068
   new_slab+0xec/0x570
   ___slab_alloc+0x3e0/0x4f8
   __slab_alloc+0x60/0x80
   __kmalloc_node_track_caller+0x10c/0x478
   devm_kmalloc+0x44/0xb0
   pinctrl_bind_pins+0x4c/0x188
   really_probe+0x78/0x2b8
   driver_probe_device+0x64/0x110
   device_driver_attach+0x74/0x98
   __driver_attach+0x9c/0xe8
   bus_for_each_dev+0x84/0xd8
   driver_attach+0x30/0x40
   bus_add_driver+0x170/0x218
   driver_register+0x64/0x118
   __platform_driver_register+0x54/0x60
   arm_smmu_driver_init+0x24/0x2c
   do_one_initcall+0xbc/0x328
   kernel_init_freeable+0x304/0x3ac
   kernel_init+0x18/0x110
   ret_from_fork+0x10/0x1c
  Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804)
  ---[ end trace dfeaed4c373a32da ]--

Change the dev_set_proximity() hook prototype so that it returns a
value and make it return failure if the PXM->NUMA-node mapping
corresponds to an offline node, fixing the crash.

Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Link: https://lore.kernel.org/linux-arm-kernel/20190315021940.86905-1-wangkefeng.wang@huawei.com/
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: don't allow changes to HW VLAN stripping on active port VLANs

[ Upstream commit bfb0ebed53857cfc57f11c63fa3689940d71c1c8 ]

Modifying the VLAN stripping options when a port VLAN is configured
will break traffic for the VSI, and conceptually doesn't make sense,
so don't allow this.

Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Able to add up to 16 MAC filters on an untrusted VF

[ Upstream commit 06b6e2a2333eb3581567a7ac43ca465ef45f4daa ]

This patch fixes the problem with the driver being able to add only 7
multicast MAC address filters instead of 16. The problem is fixed by
changing the maximum number of MAC address filters to 16+1+1 (two extra
are needed because the driver uses 1 for unicast MAC address and 1 for
broadcast).

Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mapphone-mdm6600: add gpiolib dependency

[ Upstream commit 208d3423ee463ab257908456f6bbca4024ab63f7 ]

gcc points out that when CONFIG_GPIOLIB is disabled,
gpiod_get_array_value_cansleep() returns 0 but fails to set its output:

drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status':
drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized]

This could be fixed more generally in gpiolib by returning a failure
code, but for this specific case, the easier workaround is to add a
gpiolib dependency.

Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode

[ Upstream commit e6f32efb1b128344a2c7df9875bc1a1abaa1d395 ]

On platforms where the MUSB and HCI controllers share PHY0, PHY passby
is required when using the HCI controller with the PHY, but it must be
disabled when the MUSB controller is used instead.

Without this, PHY0 passby is always enabled, which results in broken
peripheral mode on such platforms (e.g. H3/H5).

Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: etnaviv: avoid DMA API warning when importing buffers

[ Upstream commit 1262cc8893ecb0eb2c21e042d0d268cc180edb61 ]

During boot, I get this kernel warning:

WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc
etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536]
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000
caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables
CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14)
[<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4)
[<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124)
[<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc)
[<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c)
[<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c)
[<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104)
[<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c)
[<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c)
[<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8)
[<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0)
[<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48)
[<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60)
[<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xd81a9fa8 to 0xd81a9ff0)
9fa0:                   b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600
9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8
9fe0: b6989f18 bec613dc b697185c b667be5c
irq event stamp: 47905
hardirqs last  enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680
hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680
softirqs last  enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540
softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144
---[ end trace af477747acbcc642 ]---

The reason is the contiguous buffer exceeds the default maximum segment
size of 64K as specified by dma_get_max_seg_size() in
linux/dma-mapping.h.  Fix this by providing our own segment size, which
is set to 2GiB to cover the window found in MMUv1 GPUs.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/irq/64: Limit IST stack overflow check to #DB stack

[ Upstream commit 7dbcf2b0b770eeb803a416ee8dcbef78e6389d40 ]

Commit

  37fe6a42b343 ("x86: Check stack overflow in detail")

added a broad check for the full exception stack area, i.e. it considers
the full exception stack area as valid.

That's wrong in two aspects:

 1) It does not check the individual areas one by one

 2) #DF, NMI and #MCE are not enabling interrupts which means that a
    regular device interrupt cannot happen in their context. In fact if a
    device interrupt hits one of those IST stacks that's a bug because some
    code path enabled interrupts while handling the exception.

Limit the check to the #DB stack and consider all other IST stacks as
'overflow' or invalid.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190414160143.682135110@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: core: Don't unbind interfaces following device reset failure

[ Upstream commit 381419fa720060ba48b7bbc483be787d5b1dca6f ]

The SCSI core does not like to have devices or hosts unregistered
while error recovery is in progress.  Trying to do so can lead to
self-deadlock: Part of the removal code tries to obtain a lock already
held by the error handler.

This can cause problems for the usb-storage and uas drivers, because
their error handler routines perform a USB reset, and if the reset
fails then the USB core automatically goes on to unbind all drivers
from the device's interfaces -- all while still in the context of the
SCSI error handler.

As it turns out, practically all the scenarios leading to a USB reset
failure end up causing a device disconnect (the main error pathway in
usb_reset_and_verify_device(), at the end of the routine, calls
hub_port_logical_disconnect() before returning).  As a result, the
hub_wq thread will soon become aware of the problem and will unbind
all the device's drivers in its own context, not in the
error-handler's context.

This means that usb_reset_device() does not need to call
usb_unbind_and_rebind_marked_interfaces() in cases where
usb_reset_and_verify_device() has returned an error, because hub_wq
will take care of everything anyway.

This particular problem was observed in somewhat artificial
circumstances, by using usbfs to tell a hub to power-down a port
connected to a USB-3 mass storage device using the UAS protocol.  With
the port turned off, the currently executing command timed out and the
error handler started running.  The USB reset naturally failed,
because the hub port was off, and the error handler deadlocked as
described above.  Not carrying out the call to
usb_unbind_and_rebind_marked_interfaces() fixes this issue.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Kento Kobayashi <Kento.A.Kobayashi@sony.com>
Tested-by: Kento Kobayashi <Kento.A.Kobayashi@sony.com>
CC: Bart Van Assche <bvanassche@acm.org>
CC: Martin K. Petersen <martin.petersen@oracle.com>
CC: Jacky Cao <Jacky.Cao@sony.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: handle error from qeth_update_from_chp_desc()

[ Upstream commit a4cdc9baee0740748f16e50cd70c2607510df492 ]

Subsequent code relies on the values that qeth_update_from_chp_desc()
reads from the CHP descriptor. Rather than dealing with weird errors
later on, just handle it properly here.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thunderbolt: Take domain lock in switch sysfs attribute callbacks

[ Upstream commit 09f11b6c99feaf86a26444bca85dc693b3f58f8b ]

switch_lock was introduced because it allowed serialization of device
authorization requests from userspace without need to take the big
domain lock (tb->lock). This was fine because device authorization with
ICM is just one command that is sent to the firmware. Now that we start
to handle all tunneling in the driver switch_lock is not enough because
we need to walk over the topology to establish paths.

For this reason drop switch_lock from the driver completely in favour of
big domain lock.

There is one complication, though. If userspace is waiting for the lock
in tb_switch_set_authorized(), it keeps the device_del() from removing
the sysfs attribute because it waits for active users to release the
attribute first which leads into following splat:

    INFO: task kworker/u8:3:73 blocked for more than 61 seconds.
          Tainted: G        W         5.1.0-rc1+ #244
    "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    kworker/u8:3    D12976    73      2 0x80000000
    Workqueue: thunderbolt0 tb_handle_hotplug [thunderbolt]
    Call Trace:
     ? __schedule+0x2e5/0x740
     ? _raw_spin_lock_irqsave+0x12/0x40
     ? prepare_to_wait_event+0xc5/0x160
     schedule+0x2d/0x80
     __kernfs_remove.part.17+0x183/0x1f0
     ? finish_wait+0x80/0x80
     kernfs_remove_by_name_ns+0x4a/0x90
     remove_files.isra.1+0x2b/0x60
     sysfs_remove_group+0x38/0x80
     sysfs_remove_groups+0x24/0x40
     device_remove_attrs+0x3d/0x70
     device_del+0x14c/0x360
     device_unregister+0x15/0x50
     tb_switch_remove+0x9e/0x1d0 [thunderbolt]
     tb_handle_hotplug+0x119/0x5a0 [thunderbolt]
     ? process_one_work+0x1b7/0x420
     process_one_work+0x1b7/0x420
     worker_thread+0x37/0x380
     ? _raw_spin_unlock_irqrestore+0xf/0x30
     ? process_one_work+0x420/0x420
     kthread+0x118/0x130
     ? kthread_create_on_node+0x60/0x60
     ret_from_fork+0x35/0x40

We deal this by following what network stack did for some of their
attributes and use mutex_trylock() with restart_syscall(). This makes
userspace release the attribute allowing sysfs attribute removal to
progress before the write is restarted and eventually fail when the
attribute is removed.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irq_work: Do not raise an IPI when queueing work on the local CPU

[ Upstream commit 471ba0e686cb13752bc1ff3216c54b69a2d250ea ]

The QEMU PowerPC/PSeries machine model was not expecting a self-IPI,
and it may be a bit surprising thing to do, so have irq_work_queue_on
do local queueing when target is the current CPU.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= <clg@kaod.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190409093403.20994-1-npiggin@gmail.com
[ Simplified the preprocessor comments.
  Fixed unbalanced curly brackets pointed out by Thomas. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: a5xx: fix possible object reference leak

[ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Mamta Shukla <mamtashukla555@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sharat Masetty <smasetty@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org (open list)
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: vc04_services: handle kzalloc failure

[ Upstream commit a5112277872a56017b777770e2fd4324d4a6c866 ]

The kzalloc here was being used without checking the return - if the
kzalloc fails return VCHIQ_ERROR. The call-site of
vchiq_platform_init_state() vchiq_init_state() was not responding
to an allocation failure so checks for != VCHIQ_SUCCESS
and pass VCHIQ_ERROR up to vchiq_platform_init() which then
will fail with -EINVAL.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-By: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Handle overflow in cpu_shares_write_u64

[ Upstream commit 5b61d50ab4ef590f5e1d4df15cd2cea5f5715308 ]

Bit shift in scale_load() could overflow shares. This patch saturates
it to MAX_SHARES like following sched_group_set_shares().

Example:

 # echo 9223372036854776832 > cpu.shares
 # cat cpu.shares

Before patch: 1024
After pattch: 262144

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501891.293431.3345233332801109696.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/rt: Check integer overflow at usec to nsec conversion

[ Upstream commit 1a010e29cfa00fee2888fd2fd4983f848cbafb58 ]

Example of unhandled overflows:

 # echo 18446744073709651 > cpu.rt_runtime_us
 # cat cpu.rt_runtime_us
 99

 # echo 18446744073709900 > cpu.rt_period_us
 # cat cpu.rt_period_us
 348

After this patch they will fail with -EINVAL.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125501739.293431.5252197504404771496.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Check quota and period overflow at usec to nsec conversion

[ Upstream commit 1a8b4540db732ca16c9e43ac7c08b1b8f0b252d8 ]

Large values could overflow u64 and pass following sanity checks.

 # echo 18446744073750000 > cpu.cfs_period_us
 # cat cpu.cfs_period_us
 40448

 # echo 18446744073750000 > cpu.cfs_quota_us
 # cat cpu.cfs_quota_us
 40448

After this patch they will fail with -EINVAL.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/155125502079.293431.3947497929372138600.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup: protect cgroup->nr_(dying_)descendants by css_set_lock

[ Upstream commit 4dcabece4c3a9f9522127be12cc12cc120399b2f ]

The number of descendant cgroups and the number of dying
descendant cgroups are currently synchronized using the cgroup_mutex.

The number of descendant cgroups will be required by the cgroup v2
freezer, which will use it to determine if a cgroup is frozen
(depending on total number of descendants and number of frozen
descendants). It's not always acceptable to grab the cgroup_mutex,
especially from quite hot paths (e.g. exit()).

To avoid this, let's additionally synchronize these counters using
the css_set_lock.

So, it's safe to read these counters with either cgroup_mutex or
css_set_lock locked, and for changing both locks should be acquired.

Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: kernel-team@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

random: add a spinlock_t to struct batched_entropy

[ Upstream commit b7d5dc21072cda7124d13eae2aefb7343ef94197 ]

The per-CPU variable batched_entropy_uXX is protected by get_cpu_var().
This is just a preempt_disable() which ensures that the variable is only
from the local CPU. It does not protect against users on the same CPU
from another context. It is possible that a preemptible context reads
slot 0 and then an interrupt occurs and the same value is read again.

The above scenario is confirmed by lockdep if we add a spinlock:
| ================================
| WARNING: inconsistent lock state
| 5.1.0-rc3+ #42 Not tainted
| --------------------------------
| inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
| ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes:
| (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0
| {SOFTIRQ-ON-W} state was registered at:
|   _raw_spin_lock+0x2a/0x40
|   get_random_u32+0x3e/0xe0
|   new_slab+0x15c/0x7b0
|   ___slab_alloc+0x492/0x620
|   __slab_alloc.isra.73+0x53/0xa0
|   kmem_cache_alloc_node+0xaf/0x2a0
|   copy_process.part.41+0x1e1/0x2370
|   _do_fork+0xdb/0x6d0
|   kernel_thread+0x20/0x30
|   kthreadd+0x1ba/0x220
|   ret_from_fork+0x3a/0x50
…
| other info that might help us debug this:
|  Possible unsafe locking scenario:
|
|        CPU0
|        ----
|   lock(batched_entropy_u32.lock);
|   <Interrupt>
|     lock(batched_entropy_u32.lock);
|
|  *** DEADLOCK ***
|
| stack backtrace:
| Call Trace:
…
|  kmem_cache_alloc_trace+0x20e/0x270
|  ipmi_alloc_recv_msg+0x16/0x40
…
|  __do_softirq+0xec/0x48d
|  run_ksoftirqd+0x37/0x60
|  smpboot_thread_fn+0x191/0x290
|  kthread+0xfe/0x130
|  ret_from_fork+0x3a/0x50

Add a spinlock_t to the batched_entropy data structure and acquire the
lock while accessing it. Acquire the lock with disabled interrupts
because this function may be used from interrupt context.

Remove the batched_entropy_reset_lock lock. Now that we have a lock for
the data scructure, we can access it from a remote CPU.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

random: fix CRNG initialization when random.trust_cpu=1

[ Upstream commit fe6f1a6a8eedc1aa538fee0baa612b6a59639cf8 ]

When the system boots with random.trust_cpu=1 it doesn't initialize the
per-NUMA CRNGs because it skips the rest of the CRNG startup code. This
means that the code from 1e7f583af67b ("random: make /dev/urandom scalable
for silly userspace programs") is not used when random.trust_cpu=1.

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314029] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$6 = (struct crng_state **) 0x0

After adding the missing call to numa_crng_init() the per-NUMA CRNGs are
initialized again:

crash> dmesg | grep random:
[    0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[    0.314031] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$1 = (struct crng_state **) 0xffff9a915f4014a0

The call to invalidate_batched_entropy() was also missing. This is
important for architectures like PPC and S390 which only have the
arch_get_random_seed_* functions.

Fixes: 39a8883a2b98 ("random: add a config option to trust the CPU's hwrng")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64: Fix booting large kernels with STRICT_KERNEL_RWX

[ Upstream commit 56c46bba9bbfe229b4472a5be313c44c5b714a39 ]

With STRICT_KERNEL_RWX enabled anything marked __init is placed at a 16M
boundary.  This is necessary so that it can be repurposed later with
different permissions.  However, in kernels with text larger than 16M,
this pushes early_setup past 32M, incapable of being reached by the
branch instruction.

Fix this by setting the CTR and branching there instead.

Fixes: 1e0fc9d1eb2b ("powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs")
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Fix it to work on BE by using DOTSYM()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/numa: improve control of topology updates

[ Upstream commit 2d4d9b308f8f8dec68f6dbbff18c68ec7c6bd26f ]

When booted with "topology_updates=no", or when "off" is written to
/proc/powerpc/topology_updates, NUMA reassignments are inhibited for
PRRN and VPHN events. However, migration and suspend unconditionally
re-enable reassignments via start_topology_update(). This is
incoherent.

Check the topology_updates_enabled flag in
start/stop_topology_update() so that callers of those APIs need not be
aware of whether reassignments are enabled. This allows the
administrative decision on reassignments to remain in force across
migrations and suspensions.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: fix use-after-free on gendisk

[ Upstream commit 2c88e3c7ec32d7a40cc7c9b4a487cf90e4671bdd ]

commit 2da78092dda "block: Fix dev_t minor allocation lifetime"
specifically moved blk_free_devt(dev->devt) call to part_release()
to avoid reallocating device number before the device is fully
shutdown.

However, it can cause use-after-free on gendisk in get_gendisk().
We use md device as example to show the race scenes:

Process1 Worker Process2
md_free
blkdev_open
del_gendisk
  add delete_partition_work_fn() to wq
   __blkdev_get
get_gendisk
put_disk
  disk_release
    kfree(disk)
     find part from ext_devt_idr
get_disk_and_module(disk)
        cause use after free

     delete_partition_work_fn
put_device(part)
        part_release
     remove part from ext_devt_idr

Before <devt, hd_struct pointer> is removed from ext_devt_idr by
delete_partition_work_fn(), we can find the devt and then access
gendisk by hd_struct pointer. But, if we access the gendisk after
it have been freed, it can cause in use-after-freeon gendisk in
get_gendisk().

We fix this by adding a new helper blk_invalidate_devt() in
delete_partition() and del_gendisk(). It replaces hd_struct
pointer in idr with value 'NULL', and deletes the entry from
idr in part_release() as we do now.

Thanks to Jan Kara for providing the solution and more clear comments
for the code.

Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: stm32-dfsdm: fix unmet direct dependencies detected

[ Upstream commit ba7ecfe43d6bf12e2aa76705c45f7d187ae3d7c0 ]

This fixes unmet direct dependencies seen when CONFIG_STM32_DFSDM_ADC
is selected:

WARNING: unmet direct dependencies detected for IIO_BUFFER_HW_CONSUMER
  Depends on [n]: IIO [=y] && IIO_BUFFER [=n]
  Selected by [y]:
  - STM32_DFSDM_ADC [=y] && IIO [=y] && (ARCH_STM32 [=y] && OF [=y] ||
    COMPILE_TEST [=n])

Fixes: e2e6771c6462 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pvrusb2: Prevent a buffer overflow

[ Upstream commit c1ced46c7b49ad7bc064e68d966e0ad303f917fb ]

The ctrl_check_input() function is called from pvr2_ctrl_range_check().
It's supposed to validate user supplied input and return true or false
depending on whether the input is valid or not.  The problem is that
negative shifts or shifts greater than 31 are undefined in C.  In
practice with GCC they result in shift wrapping so this function returns
true for some inputs which are not valid and this could result in a
buffer overflow:

    drivers/media/usb/pvrusb2/pvrusb2-ctrl.c:205 pvr2_ctrl_get_valname()
    warn: uncapped user index 'names[val]'

The cptr->hdw->input_allowed_mask mask is configured in pvr2_hdw_create()
and the highest valid bit is BIT(4).

Fixes: 7fb20fa38caa ("V4L/DVB (7299): pvrusb2: Improve logic which handles input choice availability")

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: au0828: Fix NULL pointer dereference in au0828_analog_stream_enable()

[ Upstream commit 898bc40bfcc26abb6e06e960d6d4754c36c58b50 ]

Fix au0828_analog_stream_enable() to check if device is in the right
state first. When unbind happens while bind is in progress, usbdev
pointer could be invalid in au0828_analog_stream_enable() and a call
to usb_ifnum_to_if() will result in the null pointer dereference.

This problem is found with the new media_dev_allocator.sh test.

kernel: [  590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8
kernel: [  590.359627] #PF error: [normal kernel read fault]
kernel: [  590.359629] PGD 0 P4D 0
kernel: [  590.359632] Oops: 0000 [#1] SMP PTI
kernel: [  590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30
kernel: [  590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013
kernel: [  590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60
kernel: [  590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4
 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6
6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c
9 74
kernel: [  590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246
kernel: [  590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000
kernel: [  590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000
kernel: [  590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50
kernel: [  590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000
kernel: [  590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000
kernel: [  590.359654] FS:  00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000
kernel: [  590.359655] CS:  0010 DS: 0000 ES: 0000 CR0: 00 00000080050033
kernel: [  590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0
kernel: [  590.359658] Call Trace:
kernel: [  590.359664]  ? au0828_analog_stream_enable+0x2c/0x180
kernel: [  590.359666]  au0828_v4l2_open+0xa4/0x110
kernel: [  590.359670]  v4l2_open+0x8b/0x120
kernel: [  590.359674]  chrdev_open+0xa6/0x1c0
kernel: [  590.359676]  ? cdev_put.part.3+0x20/0x20
kernel: [  590.359678]  do_dentry_open+0x1f6/0x360
kernel: [  590.359681]  vfs_open+0x2f/0x40
kernel: [  590.359684]  path_openat+0x299/0xc20
kernel: [  590.359688]  do_filp_open+0x9b/0x110
kernel: [  590.359695]  ? _raw_spin_unlock+0x27/0x40
kernel: [  590.359697]  ? __alloc_fd+0xb2/0x160
kernel: [  590.359700]  do_sys_open+0x1ba/0x260
kernel: [  590.359702]  ? do_sys_open+0x1ba/0x260
kernel: [  590.359712]  __x64_sys_openat+0x20/0x30
kernel: [  590.359715]  do_syscall_64+0x5a/0x120
kernel: [  590.359718]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: stm32-dcmi: fix crash when subdev do not expose any formats

[ Upstream commit 33dfeb62e23c31619d2197850f7e8b50e8cc5466 ]

Do not access sd_formats[] if num_of_sd_formats is zero, ie
subdev sensor didn't expose any formats.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit: fix a memory leak bug

[ Upstream commit 70c4cf17e445264453bc5323db3e50aa0ac9e81f ]

In audit_rule_change(), audit_data_to_entry() is firstly invoked to
translate the payload data to the kernel's rule representation. In
audit_data_to_entry(), depending on the audit field type, an audit tree may
be created in audit_make_tree(), which eventually invokes kmalloc() to
allocate the tree.  Since this tree is a temporary tree, it will be then
freed in the following execution, e.g., audit_add_rule() if the message
type is AUDIT_ADD_RULE or audit_del_rule() if the message type is
AUDIT_DEL_RULE. However, if the message type is neither AUDIT_ADD_RULE nor
AUDIT_DEL_RULE, i.e., the default case of the switch statement, this
temporary tree is not freed.

To fix this issue, only allocate the tree when the type is AUDIT_ADD_RULE
or AUDIT_DEL_RULE.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov2659: make S_FMT succeed even if requested format doesn't match

[ Upstream commit bccb89cf9cd07a0690d519696a00c00a973b3fe4 ]

This driver returns an error if unsupported media bus pixel code is
requested by VIDIOC_SUBDEV_S_FMT.

But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst,

Drivers must not return an error solely because the requested format
doesn't match the device capabilities. They must instead modify the
format to match what the hardware can provide.

So select default format code and return success in that case.

This is detected by v4l2-compliance.

Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: au0828: stop video streaming only when last user stops

[ Upstream commit f604f0f5afb88045944567f604409951b5eb6af8 ]

If the application was streaming from both videoX and vbiX, and streaming
from videoX was stopped, then the vbi streaming also stopped.

The cause being that stop_streaming for video stopped the subdevs as well,
instead of only doing that if dev->streaming_users reached 0.

au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs
at all when dev->streaming_users reached 0.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov6650: Move v4l2_clk_get() to ov6650_video_probe() helper

[ Upstream commit ccdd85d518d8b9320ace1d87271f0ba2175f21fa ]

In preparation for adding asynchronous subdevice support to the driver,
don't acquire v4l2_clk from the driver .probe() callback as that may
fail if the clock is provided by a bridge driver which may be not yet
initialized.  Move the v4l2_clk_get() to ov6650_video_probe() helper
which is going to be converted to v4l2_subdev_internal_ops.registered()
callback, executed only when the bridge driver is ready.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: coda: clear error return value before picture run

[ Upstream commit bbeefa7357a648afe70e7183914c87c3878d528d ]

The error return value is not written by some firmware codecs, such as
MPEG-2 decode on CodaHx4. Clear the error return value before starting
the picture run to avoid misinterpreting unrelated values returned by
sequence initialization as error return value.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: at_xdmac: remove BUG_ON macro in tasklet

[ Upstream commit e2c114c06da2d9ffad5b16690abf008d6696f689 ]

Even if this case shouldn't happen when controller is properly programmed,
it's still better to avoid dumping a kernel Oops for this.
As the sequence may happen only for debugging purposes, log the error and
just finish the tasklet call.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/arm-cci: Remove broken race mitigation

[ Upstream commit 0d2e2a82d4de298d006bf8eddc86829e3c7da820 ]

Uncore PMU drivers face an awkward cyclic dependency wherein:

 - They have to pick a valid online CPU to associate with before
   registering the PMU device, since it will get exposed to userspace
   immediately.
 - The PMU registration has to be be at least partly complete before
   hotplug events can be handled, since trying to migrate an
   uninitialised context would be bad.
 - The hotplug handler has to be ready as soon as a CPU is chosen, lest
   it go offline without the user-visible cpumask value getting updated.

The arm-cci driver has tried to solve this by using get_cpu() to pick
the current CPU and prevent it from disappearing while both
registrations are performed, but that results in taking mutexes with
preemption disabled, which makes certain configurations very unhappy:

[ 1.983337] BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:2004
[ 1.983340] in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: swapper/0
[ 1.983342] Preemption disabled at:
[ 1.983353] [<ffffff80089801f4>] cci_pmu_probe+0x1dc/0x488
[ 1.983360] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.20-rt8-yocto-preempt-rt #1
[ 1.983362] Hardware name: ZynqMP ZCU102 Rev1.0 (DT)
[ 1.983364] Call trace:
[ 1.983369] dump_backtrace+0x0/0x158
[ 1.983372] show_stack+0x24/0x30
[ 1.983378] dump_stack+0x80/0xa4
[ 1.983383] ___might_sleep+0x138/0x160
[ 1.983386] __might_sleep+0x58/0x90
[ 1.983391] __rt_mutex_lock_state+0x30/0xc0
[ 1.983395] _mutex_lock+0x24/0x30
[ 1.983400] perf_pmu_register+0x2c/0x388
[ 1.983404] cci_pmu_probe+0x2bc/0x488
[ 1.983409] platform_drv_probe+0x58/0xa8

It is not feasible to resolve all the possible races outside of the perf
core itself, so address the immediate bug by following the example of
nearly every other PMU driver and not even trying to do so. Registering
the hotplug notifier first should minimise the window in which things
can go wrong, so that's about as much as we can reasonably do here. This
also revealed an additional race in assigning the global pointer too
late relative to the hotplug notifier, which gets fixed in the process.

Reported-by: Li, Meng <Meng.Li@windriver.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: undo several noc and special clocks as critical on rk3288

[ Upstream commit f4033db5b84ebe4b32c25ba2ed65ab20b628996a ]

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark
noc and some special clk as critical on rk3288") except that we're
keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms
of power savings (checking the power on the logic rail).  It appears
to save maybe 1-2mW.  ...but still it seems like we should turn the
clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're
still keeping critical) from an email thread:

> pmu ahb clock
>
> Function: Clock to pmu module when hibernation and/or ADP is
> enabled. Must be greater than or equal to 30 MHz.
>
> If the SOC design does not support hibernation/ADP function, only have
> hclk_otg, this clk can be switched according to the usage of otg.
> If the SOC design support hibernation/ADP, has two clocks, hclk_otg and
> pmu_hclk_otg0.
> Hclk_otg belongs to the closed part of otg logic, which can be switched
> according to the use of otg.
>
> pmu_hclk_otg0 belongs to the always on part.
>
> As for whether pmu_hclk_otg0 can be turned off when otg is not in use,
> we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to
the CPU.  CPU functions fine without it on.  Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with
JTAG.  It doesn't seem like it makes sense to waste power for every
rk3288 user.  In any case to do JTAG you'd need private patches to
adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two
clocks on only during kernel panics in order to access some coresight
registers.  Since nothing in the upstream kernel does this we should
be able to leave them off safely.  Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need
to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn
these 4 clocks on only when doing DDR transitions and they are off
otherwise.  I see no reason why they'd need to be on in the upstream
kernel which doesn't support DDRFreq.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: samsung: fix leaked of_node references

[ Upstream commit 44b9f86cd41db6c522effa5aec251d664a52fbc0 ]

The call to of_find_compatible_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.
./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: pistachio: fix leaked of_node references

[ Upstream commit 44a4455ac2c6b0981eace683a2b6eccf47689022 ]

The call to of_get_child_by_name returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: use RAP instead of FAP to get the protocol version

[ Upstream commit 096377525cdb8251e4656085efc988bdf733fb4c ]

According to the logitech_hidpp_2.0_specification_draft_2012-06-04.pdf doc:
https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf

We should use a register-access-protocol request using the short input /
output report ids. This is necessary because 27MHz HID++ receivers have
a max-packetsize on their HIP++ endpoint of 8, so they cannot support
long reports. Using a feature-access-protocol request (which is always
long or very-long) with these will cause a timeout error, followed by
the hidpp driver treating the device as not being HID++ capable.

This commit fixes this by switching to using a rap request to get the
protocol version.

Besides being tested with a (046d:c517) 27MHz receiver with various
27MHz keyboards and mice, this has also been tested to not cause
regressions on a non-unifying dual-HID++ nano receiver (046d:c534) with
k270 and m185 HID++-2.0 devices connected and on a unifying/dj receiver
(046d:c52b) with a HID++-2.0 Logitech Rechargeable Touchpad T650.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_qca: Give enough time to ROME controller to bootup.

[ Upstream commit 7f09d5a6c33be66a5ca19bf9dd1c2d90c5dfcf0d ]

This patch enables enough time to ROME controller to bootup
after we bring the enable pin out of reset.

Fixes: 05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support").
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Rocky Liao <rjliao@codeaurora.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/uaccess: Use 'unsigned long' to placate UBSAN warnings on older GCC versions

[ Upstream commit 29da93fea3ea39ab9b12270cc6be1b70ef201c9e ]

Randy reported objtool triggered on his (GCC-7.4) build:

  lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled
  lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled

This is due to UBSAN generating signed-overflow-UB warnings where it
should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel
uses through -fno-strict-overflow).

Make the functions use 'unsigned long' throughout.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Remove in_nmi() warning from 64-bit implementation of vmalloc_fault()

[ Upstream commit a65c88e16f32aa9ef2e8caa68ea5c29bd5eb0ff0 ]

In-NMI warnings have been added to vmalloc_fault() via:

  ebc8827f75 ("x86: Barf when vmalloc and kmemcheck faults happen in NMI")

back in the time when our NMI entry code could not cope with nested NMIs.

These days, it's perfectly fine to take a fault in NMI context and we
don't have to care about the fact that IRET from the fault handler might
cause NMI nesting.

This warning has already been removed from 32-bit implementation of
vmalloc_fault() in:

  6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")

but the 64-bit version was omitted.

Remove the bogus warning also from 64-bit implementation of vmalloc_fault().

Reported-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6863ea0cda8 ("x86/mm: Remove in_nmi() warning from vmalloc_fault()")
Link: http://lkml.kernel.org/r/nycvar.YFH.7.76.1904240902280.9803@cbobk.fhfr.pm
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smpboot: Place the __percpu annotation correctly

[ Upstream commit d4645d30b50d1691c26ff0f8fa4e718b08f8d3bb ]

The test robot reported a wrong assignment of a per-CPU variable which
it detected by using sparse and sent a report. The assignment itself is
correct. The annotation for sparse was wrong and hence the report.
The first pointer is a "normal" pointer and points to the per-CPU memory
area. That means that the __percpu annotation has to be moved.

Move the __percpu annotation to pointer which points to the per-CPU
area. This change affects only the sparse tool (and is ignored by the
compiler).

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f97f8f06a49fe ("smpboot: Provide infrastructure for percpu hotplug threads")
Link: http://lkml.kernel.org/r/20190424085253.12178-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/build: Move _etext to actual end of .text

[ Upstream commit 392bef709659abea614abfe53cf228e7a59876a4 ]

When building x86 with Clang LTO and CFI, CFI jump regions are
automatically added to the end of the .text section late in linking. As a
result, the _etext position was being labelled before the appended jump
regions, causing confusion about where the boundaries of the executable
region actually are in the running kernel, and broke at least the fault
injection code. This moves the _etext mark to outside (and immediately
after) the .text area, as it already the case on other architectures
(e.g. arm64, arm).

Reported-and-tested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190423183827.GA4012@beast
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdev

[ Upstream commit b49bdc8602b7c9c7a977758bee4125683f73e59f ]

When releasing the vfio-ccw mdev, we currently do not release
any existing channel program and its pinned pages. This can
lead to the following warning:

[1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1]

....

1038876.561921] Call Trace:
[1038876.561935] ([<00000009897fb870>] 0x9897fb870)
[1038876.561949]  [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1]
[1038876.561965]  [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio]
[1038876.561978]  [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio]
[1038876.562024]  [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm]
[1038876.562045]  [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm]
[1038876.562065]  [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm]
[1038876.562083]  [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm]
[1038876.562098]  [<00000000003c2dc4>] __fput+0x144/0x228
[1038876.562113]  [<000000000016ee82>] task_work_run+0x8a/0xd8
[1038876.562125]  [<000000000014c7a8>] do_exit+0x5d8/0xd90
[1038876.562140]  [<000000000014d084>] do_group_exit+0xc4/0xc8
[1038876.562155]  [<000000000015c046>] get_signal+0x9ae/0xa68
[1038876.562169]  [<0000000000108d66>] do_signal+0x66/0x768
[1038876.562185]  [<0000000000b9e37e>] system_call+0x1ea/0x2d8
[1038876.562195] 2 locks held by qemu-system-s39/144727:
[1038876.562205]  #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio]
[1038876.562230]  #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1]
[1038876.562250] Last Breaking-Event-Address:
[1038876.562262]  [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1]
[1038876.562272] irq event stamp: 4236481
[1038876.562287] hardirqs last  enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740
[1038876.562311] softirqs last  enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598
[1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108
[1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]---

Similarly we do not free the channel program when we are removing
the vfio-ccw device. Let's fix this by resetting the device and freeing
the channel program and pinned pages in the release path. For the remove
path we can just quiesce the device, since in the remove path the mediated
device is going away for good and so we don't need to do a full reset.

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio-ccw: Do not call flush_workqueue while holding the spinlock

[ Upstream commit cea5dde42a83b5f0a039da672f8686455936b8d8 ]

Currently we call flush_workqueue while holding the subchannel
spinlock. But flush_workqueue function can go to sleep, so
do not call the function while holding the spinlock.

Fixes the following bug:

[  285.203430] BUG: scheduling while atomic: bash/14193/0x00000002
[  285.203434] INFO: lockdep is turned off.
....
[  285.203485] Preemption disabled at:
[  285.203488] [<000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw]
[  285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G        W
....
[  285.203504] Call Trace:
[  285.203510] ([<0000000000113772>] show_stack+0x82/0xd0)
[  285.203514]  [<0000000000b7a102>] dump_stack+0x92/0xd0
[  285.203518]  [<000000000017b8be>] __schedule_bug+0xde/0xf8
[  285.203524]  [<0000000000b95b5a>] __schedule+0x7a/0xc38
[  285.203528]  [<0000000000b9678a>] schedule+0x72/0xb0
[  285.203533]  [<0000000000b9bfbc>] schedule_timeout+0x34/0x528
[  285.203538]  [<0000000000b97608>] wait_for_common+0x118/0x1b0
[  285.203544]  [<0000000000166d6a>] flush_workqueue+0x182/0x548
[  285.203550]  [<000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw]
[  285.203556]  [<000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw]
[  285.203562]  [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw]
[  285.203567]  [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev]
[  285.203573]  [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev]
[  285.203578]  [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev]
[  285.203582]  [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[  285.203588]  [<00000000003c1530>] __vfs_write+0x38/0x1a8
[  285.203593]  [<00000000003c187c>] vfs_write+0xb4/0x198
[  285.203597]  [<00000000003c1af2>] ksys_write+0x5a/0xb0
[  285.203601]  [<0000000000b9e270>] system_call+0xdc/0x2d8

Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <626bab8bb2958ae132452e1ddaf1b20882ad5a9d.1554756534.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Consider scope_id while binding to ipv6 ll address

[ Upstream commit 5d7ed2f27bbd482fd29e6b2e204b1a1ee8a0b268 ]

When two netdev have same link local addresses (such as vlan and non
vlan), two rdma cm listen id should be able to bind to following different
addresses.

listener-1: addr=lla, scope_id=A, port=X
listener-2: addr=lla, scope_id=B, port=X

However while comparing the addresses only addr and port are considered,
due to which 2nd listener fails to listen.

In below example of two listeners, 2nd listener is failing with address in
use error.

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1 -p 4545&

$ rping -sv -a fe80::268a:7ff:feb3:d113%ens2f1.200 -p 4545
rdma_bind_addr: Address already in use

To overcome this, consider the scope_ids as well which forms the accurate
IPv6 link local address.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: avoid clang -Wunintialized warning

[ Upstream commit 78d4eb8ad9e1d413449d1b7a060f50b6efa81ebd ]

clang has identified a code path in which it thinks a
variable may be unused:

drivers/md/bcache/alloc.c:333:4: error: variable 'bucket' is used uninitialized whenever 'if' condition is false
      [-Werror,-Wsometimes-uninitialized]
                        fifo_pop(&ca->free_inc, bucket);
                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/md/bcache/util.h:189:6: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
            ^~
drivers/md/bcache/alloc.c:343:46: note: uninitialized use occurs here
                        allocator_wait(ca, bch_allocator_push(ca, bucket));
                                                                  ^~~~~~
drivers/md/bcache/alloc.c:287:7: note: expanded from macro 'allocator_wait'
                if (cond)                                               \
                    ^~~~
drivers/md/bcache/alloc.c:333:4: note: remove the 'if' if its condition is always true
                        fifo_pop(&ca->free_inc, bucket);
                        ^
drivers/md/bcache/util.h:219:27: note: expanded from macro 'fifo_pop'
 #define fifo_pop(fifo, i)       fifo_pop_front(fifo, (i))
                                ^
drivers/md/bcache/util.h:189:2: note: expanded from macro 'fifo_pop_front'
        if (_r) {                                                       \
        ^
drivers/md/bcache/alloc.c:331:15: note: initialize the variable 'bucket' to silence this warning
                        long bucket;
                                   ^

This cannot happen in practice because we only enter the loop
if there is at least one element in the list.

Slightly rearranging the code makes this clearer to both the
reader and the compiler, which avoids the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: add failure check to run_cache_set() for journal replay

[ Upstream commit ce3e4cfb59cb382f8e5ce359238aa580d4ae7778 ]

Currently run_cache_set() has no return value, if there is failure in
bch_journal_replay(), the caller of run_cache_set() has no idea about
such failure and just continue to execute following code after
run_cache_set().  The internal failure is triggered inside
bch_journal_replay() and being handled in async way. This behavior is
inefficient, while failure handling inside bch_journal_replay(), cache
register code is still running to start the cache set. Registering and
unregistering code running as same time may introduce some rare race
condition, and make the code to be more hard to be understood.

This patch adds return value to run_cache_set(), and returns -EIO if
bch_journal_rreplay() fails. Then caller of run_cache_set() may detect
such failure and stop registering code flow immedidately inside
register_cache_set().

If journal replay fails, run_cache_set() can report error immediately
to register_cache_set(). This patch makes the failure handling for
bch_journal_replay() be in synchronized way, easier to understand and
debug, and avoid poetential race condition for register-and-unregister
in same time.

Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: fix failure in journal relplay

[ Upstream commit 631207314d88e9091be02fbdd1fdadb1ae2ed79a ]

journal replay failed with messages:
Sep 10 19:10:43 ceph kernel: bcache: error on
bb379a64-e44e-4812-b91d-a5599871a3b1: bcache: journal entries
2057493-2057567 missing! (replaying 2057493-2076601), disabling
caching

The reason is in journal_reclaim(), when discard is enabled, we send
discard command and reclaim those journal buckets whose seq is old
than the last_seq_now, but before we write a journal with last_seq_now,
the machine is restarted, so the journal with the last_seq_now is not
written to the journal bucket, and the last_seq_wrote in the newest
journal is old than last_seq_now which we expect to be, so when we doing
replay, journals from last_seq_wrote to last_seq_now are missing.

It's hard to write a journal immediately after journal_reclaim(),
and it harmless if those missed journal are caused by discarding
since those journals are already wrote to btree node. So, if miss
seqs are started from the beginning journal, we treat it as normal,
and only print a message to show the miss journal, and point out
it maybe caused by discarding.

Patch v2 add a judgement condition to ignore the missed journal
only when discard enabled as Coly suggested.

(Coly Li: rebase the patch with other changes in bch_journal_replay())

Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com>
Tested-by: Dennis Schridde <devurandom@gmx.net>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: return error immediately in bch_journal_replay()

[ Upstream commit 68d10e6979a3b59e3cd2e90bfcafed79c4cf180a ]

When failure happens inside bch_journal_replay(), calling
cache_set_err_on() and handling the failure in async way is not a good
idea. Because after bch_journal_replay() returns, registering code will
continue to execute following steps, and unregistering code triggered
by cache_set_err_on() is running in same time. First it is unnecessary
to handle failure and unregister cache set in an async way, second there
might be potential race condition to run register and unregister code
for same cache set.

So in this patch, if failure happens in bch_journal_replay(), we don't
call cache_set_err_on(), and just print out the same error message to
kernel message buffer, then return -EIO immediately caller. Then caller
can detect such failure and handle it in synchrnozied way.

Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: avoid potential memleak of list of journal_replay(s) in the CACHE_SYNC branch of run_cache_set

[ Upstream commit 95f18c9d1310730d075499a75aaf13bcd60405a7 ]

In the CACHE_SYNC branch of run_cache_set(), LIST_HEAD(journal) is used
to collect journal_replay(s) and filled by bch_journal_read().

If all goes well, bch_journal_replay() will release the list of
jounal_replay(s) at the end of the branch.

If something goes wrong, code flow will jump to the label "err:" and leave
the list unreleased.

This patch will release the list of journal_replay(s) in the case of
error detected.

v1 -> v2:
* Move the release code to the location after label 'err:' to
  simply the change.

Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun4i-ss - Fix invalid calculation of hash end

[ Upstream commit f87391558acf816b48f325a493d81d45dec40da0 ]

When nbytes < 4, end is wronlgy set to a negative value which, due to
uint, is then interpreted to a large value leading to a deadlock in the
following code.

This patch fix this problem.

Fixes: 6298e948215f ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator")
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-rdma: fix a NULL deref when an admin connect times out

[ Upstream commit 1007709d7d06fab09bf2d007657575958676282b ]

If we timeout the admin startup sequence we might not yet have
an I/O tagset allocated which causes the teardown sequence to crash.
Make nvme_tcp_teardown_io_queues safe by not iterating inflight tags
if the tagset wasn't allocated.

Fixes: 4c174e636674 ("nvme-rdma: fix timeout handler")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme: set 0 capacity if namespace block size exceeds PAGE_SIZE

[ Upstream commit 01fa017484ad98fccdeaab32db0077c574b6bd6f ]

If our target exposed a namespace with a block size that is greater
than PAGE_SIZE, set 0 capacity on the namespace as we do not support it.

This issue encountered when the nvmet namespace was backed by a tempfile.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: cw1200: fix a NULL pointer dereference

[ Upstream commit 0ed2a005347400500a39ea7c7318f1fea57fb3ca ]

In case create_singlethread_workqueue fails, the fix free the
hardware and returns NULL to avoid NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rsi: Fix NULL pointer dereference in kmalloc

[ Upstream commit d5414c2355b20ea8201156d2e874265f1cb0d775 ]

kmalloc can fail in rsi_register_rates_channels but memcpy still attempts
to write to channels. The patch replaces these calls with kmemdup and
passes the error upstream.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mwifiex: prevent an array overflow

[ Upstream commit b4c35c17227fe437ded17ce683a6927845f8c4a4 ]

The "rate_index" is only used as an index into the phist_data->rx_rate[]
array in the mwifiex_hist_data_set() function.  That array has
MWIFIEX_MAX_AC_RX_RATES (74) elements and it's used to generate some
debugfs information.  The "rate_index" variable comes from the network
skb->data[] and it is a u8 so it's in the 0-255 range.  We need to cap
it to prevent an array overflow.

Fixes: cbf6e05527a7 ("mwifiex: add rx histogram statistics support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_sai: Update is_slave_mode with correct value

[ Upstream commit ddb351145a967ee791a0fb0156852ec2fcb746ba ]

is_slave_mode defaults to false because sai structure
that contains it is kzalloc'ed.

Anyhow, if we decide to set the following configuration
SAI slave -> SAI master, is_slave_mode will remain set on true
although SAI being master it should be set to false.

Fix this by updating is_slave_mode for each call of
fsl_sai_set_dai_fmt.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

slimbus: fix a potential NULL pointer dereference in of_qcom_slim_ngd_register

[ Upstream commit 06d5d6b7f9948a89543e1160ef852d57892c750d ]

In case platform_device_alloc fails, the fix returns an error
code to avoid the NULL pointer dereference.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: fix samples/bpf build failure due to undefined UINT32_MAX

[ Upstream commit 32e621e55496a0009f44fe4914cd4a23cade4984 ]

Currently, building bpf samples will cause the following error.

    ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) ..
     #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */
                               ^
    ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE'
     extern char bpf_log_buf[BPF_LOG_BUF_SIZE];
                             ^~~~~~~~~~~~~~~~

Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error")
hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is
defined in <stdint.h> header.

Even with this change, bpf selftests are running fine since these are built
with clang and it includes header(-idirafter) from clang/6.0.0/include.
(it has <stdint.h>)

    clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \
    -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \
    -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \
    llc -march=bpf -mcpu=generic  -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o

But bpf samples are compiled with GCC, and it only searches and includes
headers declared at the target file. As '#include <stdint.h>' hasn't been
declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples.

    gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \
    -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \
    -I./tools/  lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c;

This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h
to fix this problem.

Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211/cfg80211: update bss channel on channel switch

[ Upstream commit 5dc8cdce1d722c733f8c7af14c5fb595cfedbfa8 ]

FullMAC STAs have no way to update bss channel after CSA channel switch
completion. As a result, user-space tools may provide inconsistent
channel info. For instance, consider the following two commands:
$ sudo iw dev wlan0 link
$ sudo iw dev wlan0 info
The latter command gets channel info from the hardware, so most probably
its output will be correct. However the former command gets channel info
from scan cache, so its output will contain outdated channel info.
In fact, current bss channel info will not be updated until the
next [re-]connect.

Note that mac80211 STAs have a workaround for this, but it requires
access to internal cfg80211 data, see ieee80211_chswitch_work:

/* XXX: shouldn't really modify cfg80211-owned data! */
ifmgd->associated->channel = sdata->csa_chandef.chan;

This patch suggests to convert mac80211 workaround into cfg80211 behavior
and to update current bss channel in cfg80211_ch_switch_notify.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: pl330: _stop: clear interrupt status

[ Upstream commit 2da254cc7908105a60a6bb219d18e8dced03dcb9 ]

This patch kill instructs the DMAC to immediately terminate
execution of a thread. and then clear the interrupt status,
at last, stop generating interrupts for DMA_SEV. to guarantee
the next dma start is clean. otherwise, one interrupt maybe leave
to next start and make some mistake.

we can reporduce the problem as follows:

DMASEV: modify the event-interrupt resource, and if the INTEN sets
function as interrupt, the DMAC will set irq<event_num> HIGH to
generate interrupt. write INTCLR to clear interrupt.

DMA EXECUTING INSTRUCTS DMA TERMINATE
| |
| |
       ...       _stop
| |
| spin_lock_irqsave
     DMASEV |
| |
|     mask INTEN
| |
|      DMAKILL
| |
| spin_unlock_irqrestore

in above case, a interrupt was left, and if we unmask INTEN, the DMAC
will set irq<event_num> HIGH to generate interrupt.

to fix this, do as follows:

DMA EXECUTING INSTRUCTS DMA TERMINATE
| |
| |
       ...       _stop
| |
| spin_lock_irqsave
     DMASEV |
| |
|      DMAKILL
| |
|    clear INTCLR
|     mask INTEN
| |
| spin_unlock_irqrestore

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390: qeth: address type mismatch warning

[ Upstream commit 46b83629dede262315aa82179d105581f11763b6 ]

clang produces a harmless warning for each use for the qeth_adp_supported
macro:

drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to
      different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion]
        if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
            ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported'
        qeth_is_ipa_supported(&c->options.adp, f)
        ~~~~~~~~~~~~~~~~~~~~~                  ^

Add a version of this macro that uses the correct types, and
remove the unused qeth_adp_enabled() macro that has the same
problem.

Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

w1: fix the resume command API

[ Upstream commit 62909da8aca048ecf9fbd7e484e5100608f40a63 ]

>From the DS2408 datasheet [1]:
"Resume Command function checks the status of the RC flag and, if it is set,
 directly transfers control to the control functions, similar to a Skip ROM
 command. The only way to set the RC flag is through successfully executing
 the Match ROM, Search ROM, Conditional Search ROM, or Overdrive-Match ROM
 command"

The function currently works perfectly fine in a multidrop bus, but when we
have only a single slave connected, then only a Skip ROM is used and Match
ROM is not called at all. This is leading to problems e.g. with single one
DS2408 connected, as the Resume Command is not working properly and the
device is responding with failing results after the Resume Command.

This commit is fixing this by using a Skip ROM instead in those cases.
The bandwidth / performance advantage is exactly the same.

Refs:
[1] https://datasheets.maximintegrated.com/en/ds/DS2408.pdf

Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/nohz: Run NOHZ idle load balancer on HK_FLAG_MISC CPUs

[ Upstream commit 9b019acb72e4b5741d88e8936d6f200ed44b66b2 ]

The NOHZ idle balancer runs on the lowest idle CPU. This can
interfere with isolated CPUs, so confine it to HK_FLAG_MISC
housekeeping CPUs.

HK_FLAG_SCHED is not used for this because it is not set anywhere
at the moment. This could be folded into HK_FLAG_SCHED once that
option is fixed.

The problem was observed with increased jitter on an application
running on CPU0, caused by NOHZ idle load balancing being run on
CPU1 (an SMT sibling).

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190412042613.28930-1-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/kexec_file: Fix detection of text segment in ELF loader

[ Upstream commit 729829d775c9a5217abc784b2f16087d79c4eec8 ]

To register data for the next kernel (command line, oldmem_base, etc.) the
current kernel needs to find the ELF segment that contains head.S. This is
currently done by checking ifor 'phdr->p_paddr == 0'. This works fine for
the current kernel build but in theory the first few pages could be
skipped. Make the detection more robust by checking if the entry point lies
within the segment.

Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Abort ep termination if offload not scheduled

[ Upstream commit f848bfd8e167210a29374e8a678892bed591684f ]

Sometimes during connection recovery when there is a failure to resolve
ARP, and offload connection was not issued, driver tries to flush pending
offload connection work which was not queued up.

kernel: WARNING: CPU: 19 PID: 10110 at kernel/workqueue.c:3030 __flush_work.isra.34+0x19c/0x1b0
kernel: CPU: 19 PID: 10110 Comm: iscsid Tainted: G W 5.1.0-rc4 #11
kernel: Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.9.1 12/04/2018
kernel: RIP: 0010:__flush_work.isra.34+0x19c/0x1b0
kernel: Code: 8b fb 66 0f 1f 44 00 00 31 c0 eb ab 48 89 ef c6 07 00 0f 1f 40 00 fb 66 0f 1f 44 00 00 31 c0 eb 96 e8 08 16 fe ff 0f 0b eb 8d <0f> 0b 31 c0 eb 87 0f 1f 40 00 66 2e 0f 1
f 84 00 00 00 00 00 0f 1f
kernel: RSP: 0018:ffffa6b4054dba68 EFLAGS: 00010246
kernel: RAX: 0000000000000000 RBX: ffff91df21c36fc0 RCX: 0000000000000000
kernel: RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff91df21c36fc0
kernel: RBP: ffff91df21c36ef0 R08: 0000000000000000 R09: 0000000000000000
kernel: R10: 0000000000000038 R11: ffffa6b4054dbd60 R12: ffffffffc05e72c0
kernel: R13: ffff91db10280820 R14: 0000000000000048 R15: 0000000000000000
kernel: FS:  00007f5d83cc1740(0000) GS:ffff91df2f840000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
kernel: CR2: 0000000001cc5000 CR3: 0000000465450002 CR4: 00000000001606e0
kernel: Call Trace:
kernel: ? try_to_del_timer_sync+0x4d/0x80
kernel: qedi_ep_disconnect+0x3b/0x410 [qedi]
kernel: ? 0xffffffffc083c000
kernel: ? klist_iter_exit+0x14/0x20
kernel: ? class_find_device+0x93/0xf0
kernel: iscsi_if_ep_disconnect.isra.18+0x58/0x70 [scsi_transport_iscsi]
kernel: iscsi_if_recv_msg+0x10e2/0x1510 [scsi_transport_iscsi]
kernel: ? copyout+0x22/0x30
kernel: ? _copy_to_iter+0xa0/0x430
kernel: ? _cond_resched+0x15/0x30
kernel: ? __kmalloc_node_track_caller+0x1f9/0x270
kernel: iscsi_if_rx+0xa5/0x1e0 [scsi_transport_iscsi]
kernel: netlink_unicast+0x17f/0x230
kernel: netlink_sendmsg+0x2d2/0x3d0
kernel: sock_sendmsg+0x36/0x50
kernel: ___sys_sendmsg+0x280/0x2a0
kernel: ? timerqueue_add+0x54/0x80
kernel: ? enqueue_hrtimer+0x38/0x90
kernel: ? hrtimer_start_range_ns+0x19f/0x2c0
kernel: __sys_sendmsg+0x58/0xa0
kernel: do_syscall_64+0x5b/0x180
kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: stm32: manage the get_irq probe defer case

[ Upstream commit cf612c5949aca2bd81a1e28688957c8149ea2693 ]

Manage the -EPROBE_DEFER error case for the wake IRQ.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: 88pm860x: prevent use-after-free on device remove

[ Upstream commit f22b1ba15ee5785aa028384ebf77dd39e8e47b70 ]

The device's remove() attempts to shut down the delayed_work scheduled
on the kernel-global workqueue by calling flush_scheduled_work().

Unfortunately, flush_scheduled_work() does not prevent the delayed_work
from re-scheduling itself. The delayed_work might run after the device
has been removed, and touch the already de-allocated info structure.
This is a potential use-after-free.

Fix by calling cancel_delayed_work_sync() during remove(): this ensures
that the delayed work is properly cancelled, is no longer running, and
is not able to re-schedule itself.

This issue was detected with the help of Coccinelle.

Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: pcie: don't crash on invalid RX interrupt

[ Upstream commit 30f24eabab8cd801064c5c37589d803cb4341929 ]

If for some reason the device gives us an RX interrupt before we're
ready for it, perhaps during device power-on with misconfigured IRQ
causes mapping or so, we can crash trying to access the queues.

Prevent that by checking that we actually have RXQs and that they
were properly allocated.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: Don't panic when we can't find a root key

[ Upstream commit 7ac1e464c4d473b517bb784f30d40da1f842482e ]

When we failed to find a root key in btrfs_update_root(), we just panic.

That's definitely not cool, fix it by outputting an unique error
message, aborting current transaction and return -EUCLEAN. This should
not normally happen as the root has been used by the callers in some
way.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix panic during relocation after ENOSPC before writeback happens

[ Upstream commit ff612ba7849964b1898fd3ccd1f56941129c6aab ]

We've been seeing the following sporadically throughout our fleet

panic: kernel BUG at fs/btrfs/relocation.c:4584!
netversion: 5.0-0
Backtrace:
 #0 [ffffc90003adb880] machine_kexec at ffffffff81041da8
 #1 [ffffc90003adb8c8] __crash_kexec at ffffffff8110396c
 #2 [ffffc90003adb988] crash_kexec at ffffffff811048ad
 #3 [ffffc90003adb9a0] oops_end at ffffffff8101c19a
 #4 [ffffc90003adb9c0] do_trap at ffffffff81019114
 #5 [ffffc90003adba00] do_error_trap at ffffffff810195d0
 #6 [ffffc90003adbab0] invalid_op at ffffffff81a00a9b
    [exception RIP: btrfs_reloc_cow_block+692]
    RIP: ffffffff8143b614  RSP: ffffc90003adbb68  RFLAGS: 00010246
    RAX: fffffffffffffff7  RBX: ffff8806b9c32000  RCX: ffff8806aad00690
    RDX: ffff880850b295e0  RSI: ffff8806b9c32000  RDI: ffff88084f205bd0
    RBP: ffff880849415000   R8: ffffc90003adbbe0   R9: ffff88085ac90000
    R10: ffff8805f7369140  R11: 0000000000000000  R12: ffff880850b295e0
    R13: ffff88084f205bd0  R14: 0000000000000000  R15: 0000000000000000
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffc90003adbbb0] __btrfs_cow_block at ffffffff813bf1cd
 #8 [ffffc90003adbc28] btrfs_cow_block at ffffffff813bf4b3
 #9 [ffffc90003adbc78] btrfs_search_slot at ffffffff813c2e6c

The way relocation moves data extents is by creating a reloc inode and
preallocating extents in this inode and then copying the data into these
preallocated extents.  Once we've done this for all of our extents,
we'll write out these dirty pages, which marks the extent written, and
goes into btrfs_reloc_cow_block().  From here we get our current
reloc_control, which _should_ match the reloc_control for the current
block group we're relocating.

However if we get an ENOSPC in this path at some point we'll bail out,
never initiating writeback on this inode.  Not a huge deal, unless we
happen to be doing relocation on a different block group, and this block
group is now rc->stage == UPDATE_DATA_PTRS.  This trips the BUG_ON() in
btrfs_reloc_cow_block(), because we expect to be done modifying the data
inode.  We are in fact done modifying the metadata for the data inode
we're currently using, but not the one from the failed block group, and
thus we BUG_ON().

(This happens when writeback finishes for extents from the previous
group, when we are at btrfs_finish_ordered_io() which updates the data
reloc tree (inode item, drops/adds extent items, etc).)

Fix this by writing out the reloc data inode always, and then breaking
out of the loop after that point to keep from tripping this BUG_ON()
later.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ add note from Filipe ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix data bytes_may_use underflow with fallocate due to failed quota reserve

[ Upstream commit 39ad317315887c2cb9a4347a93a8859326ddf136 ]

When doing fallocate, we first add the range to the reserve_list and
then reserve the quota.  If quota reservation fails, we'll release all
reserved parts of reserve_list.

However, cur_offset is not updated to indicate that this range is
already been inserted into the list.  Therefore, the same range is freed
twice.  Once at list_for_each_entry loop, and once at the end of the
function.  This will result in WARN_ON on bytes_may_use when we free the
remaining space.

At the end, under the 'out' label we have a call to:

   btrfs_free_reserved_data_space(inode, data_reserved, alloc_start, alloc_end - cur_offset);

The start offset, third argument, should be cur_offset.

Everything from alloc_start to cur_offset was freed by the
list_for_each_entry_safe_loop.

Fixes: 18513091af94 ("btrfs: update btrfs_space_info's bytes_may_use timely")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/modules: Avoid breaking W^X while loading modules

[ Upstream commit f2c65fb3221adc6b73b0549fc7ba892022db9797 ]

When modules and BPF filters are loaded, there is a time window in
which some memory is both writable and executable. An attacker that has
already found another vulnerability (e.g., a dangling pointer) might be
able to exploit this behavior to overwrite kernel code. Prevent having
writable executable PTEs in this stage.

In addition, avoiding having W+X mappings can also slightly simplify the
patching of modules code on initialization (e.g., by alternatives and
static-key), as would be done in the next patch. This was actually the
main motivation for this patch.

To avoid having W+X mappings, set them initially as RW (NX) and after
they are set as RO set them as X as well. Setting them as executable is
done as a separate step to avoid one core in which the old PTE is cached
(hence writable), and another which sees the updated PTE (executable),
which would break the W^X protection.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lkml.kernel.org/r/20190426001143.4983-12-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix hardirq-unsafe locking

[ Upstream commit 300ec7415c1fed5c73660f50c8e14a67e236dc0a ]

Since fc_remote_port_delete() must be called with interrupts enabled, do
not disable interrupts when calling that function. Remove the lockin calls
from around the put_sess() call. This is safe because the function that is
called when the final reference is dropped, qlt_unreg_sess(), grabs the
proper locks. This patch avoids that lockdep reports the following:

WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
kworker/2:1/62 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
0000000009e679b3 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0

and this task is already holding:
00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]
which would create a new lock dependency:
 (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&ha->tgt.sess_lock)->rlock){-...}

... which became HARDIRQ-irq-safe at:
  lock_acquire+0xe3/0x200
  _raw_spin_lock_irqsave+0x3d/0x60
  qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
  qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
  qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
  __handle_irq_event_percpu+0x79/0x3c0
  handle_irq_event_percpu+0x70/0xf0
  handle_irq_event+0x5a/0x8b
  handle_edge_irq+0x12c/0x310
  handle_irq+0x192/0x20a
  do_IRQ+0x73/0x160
  ret_from_intr+0x0/0x1d
  default_idle+0x23/0x1f0
  arch_cpu_idle+0x15/0x20
  default_idle_call+0x35/0x40
  do_idle+0x2bb/0x2e0
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x2a8/0x320
  secondary_startup_64+0xa4/0xb0

to a HARDIRQ-irq-unsafe lock:
 (&(&k->k_lock)->rlock){+.+.}

... which became HARDIRQ-irq-unsafe at:
...
  lock_acquire+0xe3/0x200
  _raw_spin_lock+0x32/0x50
  klist_add_tail+0x33/0xb0
  device_add+0x7e1/0xb50
  device_create_groups_vargs+0x11c/0x150
  device_create_with_groups+0x89/0xb0
  vtconsole_class_init+0xb2/0x124
  do_one_initcall+0xc5/0x3ce
  kernel_init_freeable+0x295/0x32e
  kernel_init+0x11/0x11b
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&ha->tgt.sess_lock)->rlock);

 *** DEADLOCK ***

3 locks held by kworker/2:1/62:
 #0: 00000000a4319c16 ((wq_completion)"qla2xxx_wq"){+.+.}, at: process_one_work+0x437/0xa80
 #1: 00000000ffa34c42 ((work_completion)(&sess->del_work)){+.+.}, at: process_one_work+0x437/0xa80
 #2: 00000000a033b71c (&(&ha->tgt.sess_lock)->rlock){-...}, at: qla24xx_delete_sess_fn+0x55/0xf0 [qla2xxx_scst]

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 8 {
   IN-HARDIRQ-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock_irqsave+0x3d/0x60
                    qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                    qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                    qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                    __handle_irq_event_percpu+0x79/0x3c0
                    handle_irq_event_percpu+0x70/0xf0
                    handle_irq_event+0x5a/0x8b
                    handle_edge_irq+0x12c/0x310
                    handle_irq+0x192/0x20a
                    do_IRQ+0x73/0x160
                    ret_from_intr+0x0/0x1d
                    default_idle+0x23/0x1f0
                    arch_cpu_idle+0x15/0x20
                    default_idle_call+0x35/0x40
                    do_idle+0x2bb/0x2e0
                    cpu_startup_entry+0x1d/0x20
                    start_secondary+0x2a8/0x320
                    secondary_startup_64+0xa4/0xb0
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock_irqsave+0x3d/0x60
                   qla24xx_report_id_acquisition+0xa69/0xe30 [qla2xxx_scst]
                   qla24xx_process_response_queue+0x69e/0x1270 [qla2xxx_scst]
                   qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx_scst]
                   __handle_irq_event_percpu+0x79/0x3c0
                   handle_irq_event_percpu+0x70/0xf0
                   handle_irq_event+0x5a/0x8b
                   handle_edge_irq+0x12c/0x310
                   handle_irq+0x192/0x20a
                   do_IRQ+0x73/0x160
                   ret_from_intr+0x0/0x1d
                   default_idle+0x23/0x1f0
                   arch_cpu_idle+0x15/0x20
                   default_idle_call+0x35/0x40
                   do_idle+0x2bb/0x2e0
                   cpu_startup_entry+0x1d/0x20
                   start_secondary+0x2a8/0x320
                   secondary_startup_64+0xa4/0xb0
 }
 ... key      at: [<ffffffffa0c0d080>] __key.85462+0x0/0xfffffffffff7df80 [qla2xxx_scst]
 ... acquired at:
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
   qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
   qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
   process_one_work+0x511/0xa80
   worker_thread+0x67/0x5b0
   kthread+0x1d2/0x1f0
   ret_from_fork+0x3a/0x50

the dependencies between the lock to be acquired
 and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 13831 {
   HARDIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7e1/0xb50
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   SOFTIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7e1/0xb50
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock+0x32/0x50
                   klist_add_tail+0x33/0xb0
                   device_add+0x7e1/0xb50
                   device_create_groups_vargs+0x11c/0x150
                   device_create_with_groups+0x89/0xb0
                   vtconsole_class_init+0xb2/0x124
                   do_one_initcall+0xc5/0x3ce
                   kernel_init_freeable+0x295/0x32e
                   kernel_init+0x11/0x11b
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffff83ed8780>] __key.15491+0x0/0x40
 ... acquired at:
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
   qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
   qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
   process_one_work+0x511/0xa80
   worker_thread+0x67/0x5b0
   kthread+0x1d2/0x1f0
   ret_from_fork+0x3a/0x50

stack backtrace:
CPU: 2 PID: 62 Comm: kworker/2:1 Tainted: G           O      5.0.7-dbg+ #8
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: qla2xxx_wq qla24xx_delete_sess_fn [qla2xxx_scst]
Call Trace:
 dump_stack+0x86/0xca
 check_usage.cold.52+0x473/0x563
 __lock_acquire+0x11c0/0x23e0
 lock_acquire+0xe3/0x200
 _raw_spin_lock_irqsave+0x3d/0x60
 klist_next+0x43/0x1d0
 device_for_each_child+0x96/0x110
 scsi_target_block+0x3c/0x40 [scsi_mod]
 fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
 qla2x00_mark_device_lost+0xa0b/0xa30 [qla2xxx_scst]
 qlt_unreg_sess+0x1c6/0x380 [qla2xxx_scst]
 qla24xx_delete_sess_fn+0xe6/0xf0 [qla2xxx_scst]
 process_one_work+0x511/0xa80
 worker_thread+0x67/0x5b0
 kthread+0x1d2/0x1f0
 ret_from_fork+0x3a/0x50

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session()

[ Upstream commit d4023db71108375e4194e92730ba0d32d7f07813 ]

This patch avoids that lockdep reports the following warning:

=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
5.1.0-rc1-dbg+ #11 Tainted: G        W
-----------------------------------------------------
rmdir/1478 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
00000000e7ac4607 (&(&k->k_lock)->rlock){+.+.}, at: klist_next+0x43/0x1d0

and this task is already holding:
00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]
which would create a new lock dependency:
 (&(&ha->tgt.sess_lock)->rlock){-...} -> (&(&k->k_lock)->rlock){+.+.}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&(&ha->tgt.sess_lock)->rlock){-...}

... which became HARDIRQ-irq-safe at:
  lock_acquire+0xe3/0x200
  _raw_spin_lock_irqsave+0x3d/0x60
  qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
  qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
  qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
  qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
  __handle_irq_event_percpu+0x79/0x3c0
  handle_irq_event_percpu+0x70/0xf0
  handle_irq_event+0x5a/0x8b
  handle_edge_irq+0x12c/0x310
  handle_irq+0x192/0x20a
  do_IRQ+0x73/0x160
  ret_from_intr+0x0/0x1d
  default_idle+0x23/0x1f0
  arch_cpu_idle+0x15/0x20
  default_idle_call+0x35/0x40
  do_idle+0x2bb/0x2e0
  cpu_startup_entry+0x1d/0x20
  start_secondary+0x24d/0x2d0
  secondary_startup_64+0xa4/0xb0

to a HARDIRQ-irq-unsafe lock:
 (&(&k->k_lock)->rlock){+.+.}

... which became HARDIRQ-irq-unsafe at:
...
  lock_acquire+0xe3/0x200
  _raw_spin_lock+0x32/0x50
  klist_add_tail+0x33/0xb0
  device_add+0x7f4/0xb60
  device_create_groups_vargs+0x11c/0x150
  device_create_with_groups+0x89/0xb0
  vtconsole_class_init+0xb2/0x124
  do_one_initcall+0xc5/0x3ce
  kernel_init_freeable+0x295/0x32e
  kernel_init+0x11/0x11b
  ret_from_fork+0x3a/0x50

other info that might help us debug this:

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&(&k->k_lock)->rlock);
                               local_irq_disable();
                               lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&k->k_lock)->rlock);
  <Interrupt>
    lock(&(&ha->tgt.sess_lock)->rlock);

 *** DEADLOCK ***

4 locks held by rmdir/1478:
 #0: 000000002c7f1ba4 (sb_writers#10){.+.+}, at: mnt_want_write+0x32/0x70
 #1: 00000000c85eb147 (&default_group_class[depth - 1]#2/1){+.+.}, at: do_rmdir+0x217/0x2d0
 #2: 000000002b164d6f (&sb->s_type->i_mutex_key#13){++++}, at: vfs_rmdir+0x7e/0x1d0
 #3: 00000000cf0baf5e (&(&ha->tgt.sess_lock)->rlock){-...}, at: tcm_qla2xxx_close_session+0x57/0xb0 [tcm_qla2xxx]

the dependencies between HARDIRQ-irq-safe lock and the holding lock:
-> (&(&ha->tgt.sess_lock)->rlock){-...} ops: 127 {
   IN-HARDIRQ-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock_irqsave+0x3d/0x60
                    qla2x00_fcport_event_handler+0x1f3d/0x22b0 [qla2xxx]
                    qla2x00_async_login_sp_done+0x1dc/0x1f0 [qla2xxx]
                    qla24xx_process_response_queue+0xa37/0x10e0 [qla2xxx]
                    qla24xx_msix_rsp_q+0x79/0xf0 [qla2xxx]
                    __handle_irq_event_percpu+0x79/0x3c0
                    handle_irq_event_percpu+0x70/0xf0
                    handle_irq_event+0x5a/0x8b
                    handle_edge_irq+0x12c/0x310
                    handle_irq+0x192/0x20a
                    do_IRQ+0x73/0x160
                    ret_from_intr+0x0/0x1d
                    default_idle+0x23/0x1f0
                    arch_cpu_idle+0x15/0x20
                    default_idle_call+0x35/0x40
                    do_idle+0x2bb/0x2e0
                    cpu_startup_entry+0x1d/0x20
                    start_secondary+0x24d/0x2d0
                    secondary_startup_64+0xa4/0xb0
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock_irqsave+0x3d/0x60
                   qla2x00_loop_resync+0xb3d/0x2690 [qla2xxx]
                   qla2x00_do_dpc+0xcee/0xf30 [qla2xxx]
                   kthread+0x1d2/0x1f0
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffffa125f700>] __key.62804+0x0/0xfffffffffff7e900 [qla2xxx]
 ... acquired at:
   __lock_acquire+0x11ed/0x1b60
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
   qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
   tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
   target_shutdown_sessions+0x17b/0x190 [target_core_mod]
   core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
   target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
   config_item_release+0x9f/0x120 [configfs]
   config_item_put+0x29/0x2b [configfs]
   configfs_rmdir+0x3d2/0x520 [configfs]
   vfs_rmdir+0xb3/0x1d0
   do_rmdir+0x25c/0x2d0
   __x64_sys_rmdir+0x24/0x30
   do_syscall_64+0x77/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

the dependencies between the lock to be acquired
 and HARDIRQ-irq-unsafe lock:
-> (&(&k->k_lock)->rlock){+.+.} ops: 14568 {
   HARDIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7f4/0xb60
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   SOFTIRQ-ON-W at:
                    lock_acquire+0xe3/0x200
                    _raw_spin_lock+0x32/0x50
                    klist_add_tail+0x33/0xb0
                    device_add+0x7f4/0xb60
                    device_create_groups_vargs+0x11c/0x150
                    device_create_with_groups+0x89/0xb0
                    vtconsole_class_init+0xb2/0x124
                    do_one_initcall+0xc5/0x3ce
                    kernel_init_freeable+0x295/0x32e
                    kernel_init+0x11/0x11b
                    ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   lock_acquire+0xe3/0x200
                   _raw_spin_lock+0x32/0x50
                   klist_add_tail+0x33/0xb0
                   device_add+0x7f4/0xb60
                   device_create_groups_vargs+0x11c/0x150
                   device_create_with_groups+0x89/0xb0
                   vtconsole_class_init+0xb2/0x124
                   do_one_initcall+0xc5/0x3ce
                   kernel_init_freeable+0x295/0x32e
                   kernel_init+0x11/0x11b
                   ret_from_fork+0x3a/0x50
 }
 ... key      at: [<ffffffff83f3d900>] __key.15805+0x0/0x40
 ... acquired at:
   __lock_acquire+0x11ed/0x1b60
   lock_acquire+0xe3/0x200
   _raw_spin_lock_irqsave+0x3d/0x60
   klist_next+0x43/0x1d0
   device_for_each_child+0x96/0x110
   scsi_target_block+0x3c/0x40 [scsi_mod]
   fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
   qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
   qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
   tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
   target_shutdown_sessions+0x17b/0x190 [target_core_mod]
   core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
   target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
   config_item_release+0x9f/0x120 [configfs]
   config_item_put+0x29/0x2b [configfs]
   configfs_rmdir+0x3d2/0x520 [configfs]
   vfs_rmdir+0xb3/0x1d0
   do_rmdir+0x25c/0x2d0
   __x64_sys_rmdir+0x24/0x30
   do_syscall_64+0x77/0x220
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

stack backtrace:
CPU: 7 PID: 1478 Comm: rmdir Tainted: G        W         5.1.0-rc1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 dump_stack+0x86/0xca
 check_usage.cold.59+0x473/0x563
 check_prev_add.constprop.43+0x1f1/0x1170
 __lock_acquire+0x11ed/0x1b60
 lock_acquire+0xe3/0x200
 _raw_spin_lock_irqsave+0x3d/0x60
 klist_next+0x43/0x1d0
 device_for_each_child+0x96/0x110
 scsi_target_block+0x3c/0x40 [scsi_mod]
 fc_remote_port_delete+0xe7/0x1c0 [scsi_transport_fc]
 qla2x00_mark_device_lost+0x4d3/0x500 [qla2xxx]
 qlt_unreg_sess+0x104/0x2c0 [qla2xxx]
 tcm_qla2xxx_close_session+0xa2/0xb0 [tcm_qla2xxx]
 target_shutdown_sessions+0x17b/0x190 [target_core_mod]
 core_tpg_del_initiator_node_acl+0xf3/0x1f0 [target_core_mod]
 target_fabric_nacl_base_release+0x25/0x30 [target_core_mod]
 config_item_release+0x9f/0x120 [configfs]
 config_item_put+0x29/0x2b [configfs]
 configfs_rmdir+0x3d2/0x520 [configfs]
 vfs_rmdir+0xb3/0x1d0
 do_rmdir+0x25c/0x2d0
 __x64_sys_rmdir+0x24/0x30
 do_syscall_64+0x77/0x220
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending()

[ Upstream commit e209783d66bca04b5fce4429e59338517ffc1a0b ]

Implementations of the .write_pending() callback functions must guarantee
that an appropriate LIO core callback function will be called immediately or
at a later time.  Make sure that this guarantee is met for aborted SCSI
commands.

[mkp: typo]

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Fixes: 694833ee00c4 ("scsi: tcm_qla2xxx: Do not allow aborted cmd to advance.") # v4.13.
Fixes: a07100e00ac4 ("qla2xxx: Fix TMR ABORT interaction issue between qla2xxx and TCM") # v4.5.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qla2xxx: Fix a qla24xx_enable_msix() error path

[ Upstream commit 24afabdbd0b3553963a2bbf465895492b14d1107 ]

Make sure that the allocated interrupts are freed if allocating memory for
the msix_entries array fails.

Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Giridhar Malavali <gmalavali@marvell.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/cpufreq: Fix kobject memleak

[ Upstream commit 9a4f26cc98d81b67ecc23b890c28e2df324e29f3 ]

Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.

Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().

Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20190430001144.24890-1-tobin@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/watchdog: Use hrtimers for per-CPU heartbeat

[ Upstream commit 7ae3f6e130e8dc6188b59e3b4ebc2f16e9c8d053 ]

Using a jiffies timer creates a dependency on the tick_do_timer_cpu
incrementing jiffies. If that CPU has locked up and jiffies is not
incrementing, the watchdog heartbeat timer for all CPUs stops and
creates false positives and confusing warnings on local CPUs, and
also causes the SMP detector to stop, so the root cause is never
detected.

Fix this by using hrtimer based timers for the watchdog heartbeat,
like the generic kernel hardlockup detector.

Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reported-by: Ravikumar Bangoria <ravi.bangoria@in.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: Fix compiler warning from pte_unmap() with -Wunused-but-set-variable

[ Upstream commit 74dd022f9e6260c3b5b8d15901d27ebcc5f21eda ]

When building with -Wunused-but-set-variable, the compiler shouts about
a number of pte_unmap() users, since this expands to an empty macro on
arm64:

  | mm/gup.c: In function 'gup_pte_range':
  | mm/gup.c:1727:16: warning: variable 'ptem' set but not used
  | [-Wunused-but-set-variable]
  | mm/gup.c: At top level:
  | mm/memory.c: In function 'copy_pte_range':
  | mm/memory.c:821:24: warning: variable 'orig_dst_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/memory.c:821:9: warning: variable 'orig_src_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/swap_state.c: In function 'swap_ra_info':
  | mm/swap_state.c:641:15: warning: variable 'orig_pte' set but not used
  | [-Wunused-but-set-variable]
  | mm/madvise.c: In function 'madvise_free_pte_range':
  | mm/madvise.c:318:9: warning: variable 'orig_pte' set but not used
  | [-Wunused-but-set-variable]

Rewrite pte_unmap() as a static inline function, which silences the
warnings.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: vdso: Remove dependency with the arch_timer driver internals

[ Upstream commit 1f5b62f09f6b314c8d70b9de5182dae4de1f94da ]

The VDSO code uses the kernel helper that was originally designed
to abstract the access between 32 and 64bit systems. It worked so
far because this function is declared as 'inline'.

As we're about to revamp that part of the code, the VDSO would
break. Let's fix it by doing what should have been done from
the start, a proper system register access.

Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: stm32-dcmi: return appropriate error codes during probe

[ Upstream commit b5b5a27bee5884860798ffd0f08e611a3942064b ]

During probe, return the provided errors value instead of -ENODEV.
This allows the driver to be deferred probed if needed.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/bar/nv50: ensure BAR is mapped

[ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ]

If the BAR is zero size, it indicates it was never successfully mapped.
Ensure that the BAR is valid during initialization before attempting to
use it.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / property: fix handling of data_nodes in acpi_get_next_subnode()

[ Upstream commit 23583f7795025e3c783b680d906509366b0906ad ]

When the DSDT tables expose devices with subdevices and a set of
hierarchical _DSD properties, the data returned by
acpi_get_next_subnode() is incorrect, with the results suggesting a bad
pointer assignment. The parser works fine with device_nodes or
data_nodes, but not with a combination of the two.

The problem is traced to an invalid pointer used when jumping from
handling device_nodes to data nodes. The existing code looks for data
nodes below the last subdevice found instead of the common root. Fix
by forcing the acpi_device pointer to be derived from the same fwnode
for the two types of subnodes.

This same problem of handling device and data nodes was already fixed
in a similar way by 'commit bf4703fdd166 ("ACPI / property: fix data
node parsing in acpi_get_next_subnode()")' but broken later by 'commit
34055190b19 ("ACPI / property: Add fwnode_get_next_child_node()")', so
this should probably go to linux-stable all the way to 4.12

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcm80211: potential NULL dereference in brcmf_cfg80211_vndr_cmds_dcmd_handler()

[ Upstream commit e025da3d7aa4770bb1d1b3b0aa7cc4da1744852d ]

If "ret_len" is negative then it could lead to a NULL dereference.

The "ret_len" value comes from nl80211_vendor_cmd(), if it's negative
then we don't allocate the "dcmd_buf" buffer.  Then we pass "ret_len" to
brcmf_fil_cmd_data_set() where it is cast to a very high u32 value.
Most of the functions in that call tree check whether the buffer we pass
is NULL but there are at least a couple places which don't such as
brcmf_dbg_hex_dump() and brcmf_msgbuf_query_dcmd().  We memcpy() to and
from the buffer so it would result in a NULL dereference.

The fix is to change the types so that "ret_len" can't be negative.  (If
we memcpy() zero bytes to NULL, that's a no-op and doesn't cause an
issue).

Fixes: 1bacb0487d0e ("brcmfmac: replace cfg80211 testmode with vendor command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: pxa2xx: fix SCR (divisor) calculation

[ Upstream commit 29f2133717c527f492933b0622a4aafe0b3cbe9e ]

Calculate the divisor for the SCR (Serial Clock Rate), avoiding
that the SSP transmission rate can be greater than the device rate.

When the division between the SSP clock and the device rate generates
a reminder, we have to increment by one the divisor.
In this way the resulting SSP clock will never be greater than the
device SPI max frequency.

For example, with:

 - ssp_clk  = 50 MHz
 - dev freq = 15 MHz

without this patch the SSP clock will be greater than 15 MHz:

 - 25 MHz for PXA25x_SSP and CE4100_SSP
 - 16,56 MHz for the others

Instead, with this patch, we have in both case an SSP clock of 12.5MHz,
so the max rate of the SPI device clock is respected.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx: fix fiq dependencies

[ Upstream commit ea751227c813ab833609afecfeedaf0aa26f327e ]

During randconfig builds, I occasionally run into an invalid configuration
of the freescale FIQ sound support:

WARNING: unmet direct dependencies detected for SND_SOC_IMX_PCM_FIQ
  Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]
  Selected by [y]:
  - SND_SOC_FSL_SPDIF [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m]!=n && (MXC_TZIC [=n] || MXC_AVIC [=y])

sound/soc/fsl/imx-ssi.o: In function `imx_ssi_remove':
imx-ssi.c:(.text+0x28): undefined reference to `imx_pcm_fiq_exit'
sound/soc/fsl/imx-ssi.o: In function `imx_ssi_probe':
imx-ssi.c:(.text+0xa64): undefined reference to `imx_pcm_fiq_init'

The Kconfig warning is a result of the symbol being defined inside of
the "if SND_IMX_SOC" block, and is otherwise harmless. The link error
is more tricky and happens with SND_SOC_IMX_SSI=y, which may or may not
imply FIQ support. However, if SND_SOC_FSL_SSI is set to =m at the same
time, that selects SND_SOC_IMX_PCM_FIQ as a loadable module dependency,
which then causes a link failure from imx-ssi.

The solution here is to make SND_SOC_IMX_PCM_FIQ built-in whenever
one of its potential users is built-in.

Fixes: ff40260f79dc ("ASoC: fsl: refine DMA/FIQ dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Fix loop exit condition in nest_imc_event_init

[ Upstream commit 860b7d2286236170a36f94946d03ca9888d32571 ]

The data structure (i.e struct imc_mem_info) to hold the memory address
information for nest imc units is allocated based on the number of nodes
in the system.

nest_imc_event_init() traverse this struct array to calculate the memory
base address for the event-cpu. If we fail to find a match for the event
cpu's chip-id in imc_mem_info struct array, then the do-while loop will
iterate until we crash.

Fix this by changing the loop exit condition based on the number of
non zero vbase elements in the array, since the allocation is done for
nr_chips + 1.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/boot: Fix missing check of lseek() return value

[ Upstream commit 5d085ec04a000fefb5182d3b03ee46ca96d8389b ]

This is detected by Coverity scan: CID: 1440481

Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/perf: Return accordingly on invalid chip-id in

[ Upstream commit a913e5e8b43be1d3897a141ce61c1ec071cad89c ]

Nest hardware counter memory resides in a per-chip reserve-memory.
During nest_imc_event_init(), chip-id of the event-cpu is considered to
calculate the base memory addresss for that cpu. Return, proper error
condition if the chip_id calculated is invalid.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support")
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdmi-codec: unlock the device on startup errors

[ Upstream commit 30180e8436046344b12813dc954b2e01dfdcd22d ]

If the hdmi codec startup fails, it should clear the current_substream
pointer to free the device. This is properly done for the audio_startup()
callback but for snd_pcm_hw_constraint_eld().

Make sure the pointer cleared if an error is reported.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: move synchronize_irq() out of the spinlock protected block

[ Upstream commit 41a91c606e7d2b74358a944525267cc451c271e8 ]

dwc3_gadget_suspend() is called under dwc->lock spinlock. In such context
calling synchronize_irq() is not allowed. Move the problematic call out
of the protected block to fix the following kernel BUG during system
suspend:

BUG: sleeping function called from invalid context at kernel/irq/manage.c:112
in_atomic(): 1, irqs_disabled(): 128, pid: 1601, name: rtcwake
6 locks held by rtcwake/1601:
 #0: f70ac2a2 (sb_writers#7){.+.+}, at: vfs_write+0x130/0x16c
 #1: b5fe1270 (&of->mutex){+.+.}, at: kernfs_fop_write+0xc0/0x1e4
 #2: 7e597705 (kn->count#60){.+.+}, at: kernfs_fop_write+0xc8/0x1e4
 #3: 8b3527d0 (system_transition_mutex){+.+.}, at: pm_suspend+0xc4/0xc04
 #4: fc7f1c42 (&dev->mutex){....}, at: __device_suspend+0xd8/0x74c
 #5: 4b36507e (&(&dwc->lock)->rlock){....}, at: dwc3_gadget_suspend+0x24/0x3c
irq event stamp: 11252
hardirqs last  enabled at (11251): [<c09c54a4>] _raw_spin_unlock_irqrestore+0x6c/0x74
hardirqs last disabled at (11252): [<c09c4d44>] _raw_spin_lock_irqsave+0x1c/0x5c
softirqs last  enabled at (9744): [<c0102564>] __do_softirq+0x3a4/0x66c
softirqs last disabled at (9737): [<c0128528>] irq_exit+0x140/0x168
Preemption disabled at:
[<00000000>]   (null)
CPU: 7 PID: 1601 Comm: rtcwake Not tainted
5.0.0-rc3-next-20190122-00039-ga3f4ee4f8a52 #5252
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c01110f0>] (unwind_backtrace) from [<c010d120>] (show_stack+0x10/0x14)
[<c010d120>] (show_stack) from [<c09a4d04>] (dump_stack+0x90/0xc8)
[<c09a4d04>] (dump_stack) from [<c014c700>] (___might_sleep+0x22c/0x2c8)
[<c014c700>] (___might_sleep) from [<c0189d68>] (synchronize_irq+0x28/0x84)
[<c0189d68>] (synchronize_irq) from [<c05cbbf8>] (dwc3_gadget_suspend+0x34/0x3c)
[<c05cbbf8>] (dwc3_gadget_suspend) from [<c05bd020>] (dwc3_suspend_common+0x154/0x410)
[<c05bd020>] (dwc3_suspend_common) from [<c05bd34c>] (dwc3_suspend+0x14/0x2c)
[<c05bd34c>] (dwc3_suspend) from [<c051c730>] (platform_pm_suspend+0x2c/0x54)
[<c051c730>] (platform_pm_suspend) from [<c05285d4>] (dpm_run_callback+0xa4/0x3dc)
[<c05285d4>] (dpm_run_callback) from [<c0528a40>] (__device_suspend+0x134/0x74c)
[<c0528a40>] (__device_suspend) from [<c052c508>] (dpm_suspend+0x174/0x588)
[<c052c508>] (dpm_suspend) from [<c0182134>] (suspend_devices_and_enter+0xc0/0xe74)
[<c0182134>] (suspend_devices_and_enter) from [<c0183658>] (pm_suspend+0x770/0xc04)
[<c0183658>] (pm_suspend) from [<c0180ddc>] (state_store+0x6c/0xcc)
[<c0180ddc>] (state_store) from [<c09a9a70>] (kobj_attr_store+0x14/0x20)
[<c09a9a70>] (kobj_attr_store) from [<c02d6800>] (sysfs_kf_write+0x4c/0x50)
[<c02d6800>] (sysfs_kf_write) from [<c02d594c>] (kernfs_fop_write+0xfc/0x1e4)
[<c02d594c>] (kernfs_fop_write) from [<c02593d8>] (__vfs_write+0x2c/0x160)
[<c02593d8>] (__vfs_write) from [<c0259694>] (vfs_write+0xa4/0x16c)
[<c0259694>] (vfs_write) from [<c0259870>] (ksys_write+0x40/0x8c)
[<c0259870>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
Exception stack(0xed55ffa8 to 0xed55fff0)
...

Fixes: 01c10880d242 ("usb: dwc3: gadget: synchronize_irq dwc irq in suspend")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc2: gadget: Increase descriptors count for ISOC's

[ Upstream commit 54f37f56631747075f1f9a2f0edf6ba405e3e66c ]

Some function drivers queueing more than 128 ISOC requests at a time.
To avoid "descriptor chain full" cases, increasing descriptors count
from MAX_DMA_DESC_NUM_GENERIC to MAX_DMA_DESC_NUM_HS_ISOC for ISOC's
only.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: kbl_da7219_max98357a: Map BTN_0 to KEY_PLAYPAUSE

[ Upstream commit 16ec5dfe0327ddcf279957bffe4c8fe527088c63 ]

On kbl_rt5663_max98927, commit 38a5882e4292
    ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
    This key pair mapping to play/pause when playing Youtube

The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.

For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.

Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec

The same fix is required on Chrome kbl_da7219_max98357a.

Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>