Correct misspelt function names in QFutureWatcher test.

Change-Id: I60965f3475f83a7c42d2efc6ed8adf9a1403e144
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Correct misspelt function name in qtconcurrentmap test.

Change-Id: I79b54b4e0de6319add89d220d3c3306556ab4ccc
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Correct misspelt function name in qtconcurrentfilter test.

Change-Id: Ie7ea2defac407d099d7bb27cccfb34911b832626
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Change test to use new QTRY_COMPARE/QTRY_VERIFY macros.

When verifying nonzero results (i.e. that something expected *did* happen),
using these macros allows bailing out of the timer much earlier than the
potential 5 seconds.

My running this on Linux goes from ~147 seconds to ~91 seconds.

Change-Id: Ie1e41252eb4eb295b5c8e795ded02f00eb7f9387
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Make qDecodeDataUrl return bool.

Change-Id: I23b9fed39af7bea6c171b35e10bd72c424bd903e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Improve QTextCodec::codecForLocale() test.

Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.

Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix printerPaperSize and some tst_qprinter test failures

Removing QEXPECT_FAIL accordingly.

Task-number: QTBUG-22296
Task-number: QTBUG-22562
Change-Id: I128a78897722cc067168ee50dbcbfc7537abdfcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Enable variadic macros if building in c++0x mode.

Change-Id: I40d1f1f64ad31a299ccad9258f70e9bf3255c3cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

Don't allow QThreadPool test to hang on failure.

Use QTRY_VERIFY() to fail after a reasonable timeout rather than putting
the test into an infinite loop.

Change-Id: Ie0917556e15999a94cc0587f3f4c11c0d743a228
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Clarifying the flow of signals on QNetworkAccessManager.

Task-number: QTBUG-22858

Change-Id: I07eaecebf17e73f9c3148465d8970ca7672a900c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Avoid repeatedly registering the same meta-type

Register the meta-type in initTestCase(), which is run once, rather than
in init(), which is run before every test function is run.

Change-Id: Ic62a2469da6a2a85254ffc7c4d893395202c50d8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Improve qtconcurrentthreadengine autotest.

The threadCount() test function is unstable and had been disabled by
making it not be a slot.  It is better to disable it with QSKIP so that
the test output shows that the test function exists and is in need of
repair.

Change-Id: Iccdc8da31e0d15d922f7e9606835d1ff1a3a4966
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Cleanup itemmodel autotests.

Avoid using bug tracker identifiers in test function names.  These
identifiers lose their meaning when the bug tracker is replaced.

Change-Id: Ia867f7c2ec2ab9ed546588843d532ac615a34031
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove old debug code from itemmodel tests.

Change-Id: I7c6aeed2d3b593a4dac89e54ef22743d5f736d42
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Reinstate commented test data in QItemSelectionModel test.

The restored test data was marked as failing, but appears to pass, and
the available history does not explain why it was commented out.

Change-Id: I7e9e3ba72fc8fef42c91ee882efa98d25b3d8317
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Cleanup itemmodel autotests.

Bring the code closer to compliance with Qt's coding style guidelines
and eliminate excessive vertical whitespace.

Change-Id: Iaa29f8edf326ddb80cbadb6c18cca4fea88fd9b2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove empty functions from itemmodels tests.

Change-Id: I23775a334812b096192c7f44c4a3cb06f4b08705
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Cleanup corelib autotests.

When using QSignalSpy, always verify that the signal spy is valid.  This
will cause the test to give a meaningful failure when spying on a
non-existant signal.  Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.

Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove mention of Trolltech in qlibrary autotest.

Task-number: QTBUG-19653

Change-Id: I8cf21bac41b08187528ba7004a7a23b9baa64b17
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove mention of Trolltech from QGraphicsScene autotest.

Task-number: QTBUG-19653

Change-Id: Iabebf17f5b09c17a767e81a0ccadd03513238a75
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove mentions of Trolltech from QRegExp autotest.

Task-number: QTBUG-19653

Change-Id: I55ae6bed6fb2177cdc842de34ef31ae98d0d3237
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove mention of trolltech from QThreadStorage test.

Task-number: QTBUG-19653

Change-Id: I6c74a15b6c6db415a545328b73b6dd704d69bfee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove mention of Trolltech in QHttp autotest.

The data file named "trolltech" has nothing specific to Trolltech in its
contents.  Rename it to "testhtml".  The lack of a file extension is
intentional.

Task-number: QTBUG-19653
Change-Id: Idc5c5f4ffa447151e47f66ff7364f0fa8753a699
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>

Remove non-const getters marked for elimination.

These all have consted overloads, so there's no need for them.

Change-Id: I3d4f63b8eb8f1b7df7fa772d6172e0a954184d24
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>

Merge QTextDocumentFragment::toHtml() overload per Qt 5 comment.

Change-Id: Ic8850684c2298b996354e27cc96ad6486d7a3679
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>

Fix typos parametter -> parameter.

Change-Id: I0ebb3658477a1afdc1af5f4f6f64f12dc20ace56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Increase the value of the UserRole for the ItemDataRole enum.

For future proofing. No need for it to be so small.

Change-Id: I8a0c734f87671881f114922ada7c5bc9524de19b
Reviewed-by: Marius Bugge Monsen <marius@cutehacks.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Replace a pseudo-virtual slot with a virtual method.

Change-Id: I5d0e1e54e0d3d441b71b7594bc14e872512cc937
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

QLocalSocket shouldn't emit disconnected if it isn't connected yet.

Task-number: QTBUG-22082
Change-Id: I2e1dae133f50a232d4be3ff63cafaf1b417b286c
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

add tests and benchmarks for QString::toLower()/toUpper()/toCaseFolded()

Merge-request: 70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Change-Id: I3929d4d8963c3cef6d2c6420d8ad1f7a45f7e042
Reviewed-by: Olivier
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

network auto tests: add QNetworkReply test for pipelining

Reviewed-by: Markus Goetz
Task-number: QTBUG-21369
(cherry picked from commit a32bfdef6d6b45c916f143dcf8495a2e102c3eec)

Change-Id: Iecde23c56f128008c5172675601928d83180358a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix crashes and non-portable functionality in QDBusDemarshaller QByteArray extraction

QDBusArgument QByteArray extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QByteArray when the value actually is e.g. a struct of
mixed types the byte array extraction will crash as it attempts to extract
the struct data as a fixed array.

The fix adds DBus type checks to QDBusArgument byte array extraction
operator implementations.
The checks invalidate extracting arrays of other types than bytes to a
QByteArray that worked with the unchecked implementation. The rationale
for this restriction is
1) extracting a QByteArray to a variant checks already that the array
   element type is byte
2) Results of extracting arrays of types wider than a byte to a QByteArray
   are architecture-dependent making such code inherently non-portable.

Task-number: QTBUG-22840
Change-Id: Ie20f2adc06c697a68055c803215fb408568fdd90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix crash in QDBusDemarshaller QStringList extraction

QDBusArgument QStringList extraction operator and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting a QStringList and the value actually is e.g. an array of
bytes the string list extraction will crash as it interprets the bytes as
char pointers.

The fix adds DBus type checks to QDBusArgument QStringList extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.

Task-number: QTBUG-22840
Change-Id: I4b67d75b59c5052d939f3a69f3e92dabdb3bdd6b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix crash in QDBusDemarshaller basic string-like type extraction

QDBusArgument string extraction operators and QDBusDemarshaller that
implements the extraction do not check the type of the extracted value.
When extracting string-like basic DBus type that actually is e.g. an
integer the string extraction will crash as it blindly attempts to use the
integer as a pointer to char.

The fix adds DBus type checks to QDBusArgument string type extraction
operator implementations.
The checks are as permissive as possible provided crashes are avoided.
Previously supported functionality of extracting an object path or type
signature to a string type is retained.

Task-number: QTBUG-22840
Change-Id: I29be1ae592658ca268c65ed692e1d42619d52280
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Improve QSettings autotest

QTestLib-based autotests cannot perform verification steps in the test
class constructor.  This needs to be done in initTestCase() instead.

Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Remove empty functions from QSet autotest.

Change-Id: Id6fac3a83e3f4385ee1978a19e6dc92605f4abdb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Build fix for tst_qprinter with c++11

GCC 4.6 fails to build the test because of narrowing conversion.

Change-Id: I927693789be7f3df7bd1a96c8924fc04716a03f0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

v8: Build V8 for FreeBSD

For FreeBSD the libexecinfo port needs to be installed and linked to, all
tests execute and pass.

%uname -a
FreeBSD qt-ppa 8.2-STABLE FreeBSD 8.2-STABLE #4: Sun Oct 30 20:43:37 UTC 2011     ich@freebsd:/usr/obj/usr/src/sys/GENERIC  amd64
%./tst_v8
********* Start testing of tst_v8 *********
Config: Using QTest library 5.0.0, Qt 5.0.0
PASS   : tst_v8::initTestCase()
PASS   : tst_v8::eval()
PASS   : tst_v8::evalwithinwith()
PASS   : tst_v8::userobjectcompare()
PASS   : tst_v8::externalteardown()
PASS   : tst_v8::globalcall()
PASS   : tst_v8::cleanupTestCase()
Totals: 7 passed, 0 failed, 0 skipped
********* Finished testing of tst_v8 *********

Change-Id: Ia8198128126c2931807c7fb872c15baad47022e1
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>

v8: Change the selection of Operating System

Instead of doing "I want Linux and do it by selecting Unix and
discarding everything not implementing the Linux ABI". Select the
other operating system first and have a catch all Linux/Unix anchor.

!symbian is left inside as it does not hurt right now but could probably
be removed before Qt 5.0.0.

Change-Id: I731d8349e4f9c0ac33d547523f0a0f422e994e54
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>

Remove unused -DQT_NO_PCRE from qmake makefiles

That define is not used anymore when building qmake.

Change-Id: I6a478cf4bb6cc8dfe87a3cc96f1d520b08e4ba6f
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix cmake files for static builds.

Change-Id: I3864017df6fc0daeb31b389c8883401d344730bf
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>

Link to X and Xrender libs in glxconvenience

Change-Id: I54b2704be678f2c3b9ab8d24d044977c9c01e98e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix regression, make sure hit testing work on windows again.

The previous code did not make much sense

This regressed due to 74c9f9d83f9f5cb934d0b62b468c74df5a3b9a0d

Change-Id: Ia4374623257863edca706a1c3d8b565d0c6bd4c1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>

Finish removing Qt3 support

Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.

The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.

Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>

QCryptographicHash: allow to hash the content of a QIODevice

This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.

It is a quite handy overload in many cases.

Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix for -Werror -Wshadow

qevent.h:792:49: error: declaration of 'device' shadows a member of 'this' [-Werror=shadow]

Change-Id: Iccb7e79dd97d55b17fbd4dfaf3503b9e251adcfc
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Remove redundant template parameter from QMetaType's internal classes.

Filter doesn't have to be a parameter because we always use
DefinedTypesFilter.

Change-Id: I19b8eb47a4c50e290cf712f909aaead8fdc94cd9
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

Fix http authentication to a different realm on the same server

This is a regression caused by the NTLMv2 authentication patch.
I have manually tested NTLMv2 authentication against MS IIS and reverting
these two lines does not break it.

Task-number: QT-5209
Change-Id: I64159cbe468e1a7f834f8726fd0c9d4ab4c54b38
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

Fix movablity of QVariant.

After 8fd64d22ac7892b061a09c42c72aacf033b80876 (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.

This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.

Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.

Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix race in http connection channel

When authentication is cancelled, close the channel instead of the
underlying socket.
The previous behaviour could result in further requests being sent
on the closed socket, which caused errors in case of https over a proxy.

Change-Id: I3dbfc164de4fb29a426c06acaac8f29b9da1d705
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

Don't fetch credentials from cache following a failed proxy authentication

Add variable to QAuthenticatorPrivate for tracking failure
Track authentication success/failure in http proxy socket engine
Track authentication success/failure in http connection channel

Task-number: QTBUG-22875
Change-Id: Id5d39e839428271ad687e9da12fbbdea9c478f4f
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

Handle plain socket write errors in SSL

When an ssl socket is closed during connecting, and it is using a proxy
then it is possible for the plain socket to be in pending close state
when transmit() is called.
As errors were not handled, this caused the socket (and https request)
to "hang".
It now propagates the error from plain socket.

Change-Id: I6fb86815a2a63e197cea582f4b153e487543477c
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix for assertion failure

Change-Id: I97b9ecc37e938a3050793fc746288243a1cb40b7
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

Fix faulty logic in http connection pipelining

The code which prevents pipelining of requests when authentication is
in use had || where && should have been used.
Also check for blank user with a password.

Change-Id: Ic278cedd370c9d81377f49a0af43aef415cb49ad
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

QTestLib-selftest: Unblock on Windows.

Do not run tests that pop up assert boxes.

Change-Id: Idac94398ff1109605eb33a042dab734eafb1a17a
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>

Allow QMetaType to register information about movability

We need that information to perform some optimizations in QVariant.

Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>

Remove QT_NO_STL_WCHAR hack

We don't support gcc 2.95 any more.

Change-Id: I842f1f8ac64b9006516c104add0991830ac9a46a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix handling of invalid modifiers in QKeySequence.

When decoding a string don't assume valid modifier strings. If a
modifier string is unknown return Qt::Key_unknown instead of skipping
the modifier.
Currently 'Win+a' is decoded to 'A' but should be Qt::Key_unknown.

Change-Id: I1c82031159a8b3c19924a7c9e991bc6b1f90d617
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>

Use strlen() inline whenever possible

This allows us to benefit from compile-time optimization

Change-Id: I63dfde3758fcb0ff919fdc0418df1b7586da0b2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Enable Mac style on Mac OS X.

Add styles/qmacstyle_mac back to the build, modify
qstylefactory to load it on Q_OS_MAC.

Move helper functions from platforms/mac to
qmacstyle_mac.mm. QMacStyle should now be self-
contained and not rely on anything from platforms/mac.

Change-Id: I68fe40bb7f88c01269968bffd9579b7f3b932d4c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>

QNetworkAccessManager: fixed foreach copy of host address

Change-Id: I50cb113fb3c803fc5b13c74b3f7ad1fc4283065b
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

Add ToS option to sockets.

Creates a new SocketOption called called TypeOfServiceOption that can be
used with the existing setSocketOption method to set the ToS byte in a
socket socket. This is done only for unix systems because windows
doesn't support directly setting the ToS/DSCP byte:
http://support.microsoft.com/kb/248611
http://blogs.msdn.com/b/wndp/archive/2006/07/05/657196.aspx

Change-Id: Idf9da2dd8307ac7057982fbfdf9e4e9ebe366780
Task-number: QTBUG-6221
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

SSL: fix build with -openssl-linked for OpenSSL 0.9.8*

OpenSSL's SSL_ctrl() always took a "void *" argument as 4th parameter,
since at least version 0.9.7.
I have no idea why we had "const void *" in there.

Reviewed-by: Richard J. Moore <rich@kde.org>
Task-number: QTBUG-23132
(cherry picked from commit 4db91cbd6147e40f543342f22c05b7baddc52e5a)

Change-Id: Ie570e1cc59b72f13d3e6f3ed6fc1892444a63743
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>

Disable logging in xcb

The logging groves and modifies a vector.. It should at least be a
linked-list. but anyway, it shouldn't be enabled by default

Change-Id: Iaebb1158eea1c907e31e9606b143c0318a189dd1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>

Test case for QTBUG-22875

Test the authentication cache works properly with "cancelled dialogs"
or if the user enters username/password incorrectly.
Expected behaviour is based on web browsers:
If cancelled, current request fails, and prompt again the next time.
If wrong password is given, prompt again and retry the current request.
If bad credentials are in the cache, prompt again

Task-number: QTBUG-22875
Change-Id: Ic02ccac8dbeb3f2580ca4ffe47d0773982c4ab25
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>

Fix compile error when configured with -no-exceptions

The test was skipped, but still tried to compile code that uses
exceptions. The throwing class it uses was conditionally compiled
out earlier in the file, causing an error for undefined class.

Task-number: QTBUG-23028
Change-Id: Ia2e05a8a0abbf0e913f6c41e85bfee8b85cbc8a5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>

Mac: Add temporary solution to fix app deployment.

Look for the the platform plugin in "../Plugins" first.
When deployed inside an app bundle this path will
point to the plugin directory inside the app bundle.

Change-Id: I362981a9e0ca9a3e69396b033a571d0b4e2bf78a
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>

Fix up the accessibility inspector.

After accessibility API changes. Also make the windows
a bit smaller since the primary user is on a laptop
now.

Change-Id: I53a86cbe85adbbb27401dbf6c3c389629e295b4d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>

Do not crash in the windows accessibility bridge

If the object did not have a QAccessibleInterface subclass it would
crash in the windows accessibility bridge.

Change-Id: I931d69466a5a74a87f1c1c577fb1c918dcc8accf
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>

QNetworkAccessManager: delay IPv4 or IPv6 based on getaddrinfo order

Instead of always delaying IPv4 when we have both Ipv4 and IPv6 we
should use the order we get from getaddrinfo to descide which one
that should be delayed.

Task-number: QTBUG-23066
Change-Id: Ibe8c4d7000abd6e57fe8c6afac8a4a843e17ff27
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>

QTestlib: Make QImage comparison more verbose.

Introduce a specialization for qCompare(QImage,QImage) that
checks isNull, size and format and outputs verbose messages.

Check isNull, size similarly for QPixmap.

Add an autotest:
- Add test to cmptest and make it a GUI application since
  QImage requires QGuiApplication.
- Make testlib/selftests capable of running X11-GUI applications
  by passing DISPLAY.
- Ignore stderr output for cmptest
- Add test data

Change-Id: I2b29c7822fbeedf2b22c90889739ed7ff859ce92
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>

QTestLib: Fix QFINDTESTDATA for Windows.

- Scan the parent directory of the executable if it is located
  in a 'Debug' or 'Release' directory
- Report with native separators in the log.
- Use the QString::arg() overloads with several string parameters.

Change-Id: I5ea84411e12978f8f958a0bce3ae10da44cc4e3f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>

Rebuild configure.exe.

- Use create_prl, link_prl for all modules.
- Remove -graphicssystem (and -runtimegraphicssystem) options from
  configure.

Change-Id: Id1e0c8f82fa3149fd67c6a31e9e8baec06366205
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>

configure[.exe]: use create_prl, link_prl for all modules

These should go into qmodule.pri, rather than .qmake.cache, as they
make sense for all Qt modules - not only qtbase.

Fixes link failure when building qtdeclarative with jom on Windows.

Change-Id: I3e8b207e1808cb23af58b865a160c2fafa906288
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>

Reimplement QIODevice::reset() properly

The reset() function is not const.

tests/benchmarks/network/access/qnetworkreply/tst_qnetworkreply.cpp:324:
warning: 'FixedSizeDataGenerator::reset' hides overloaded virtual
function [-Woverloaded-virtual]
    virtual bool reset() const{
                 ^
src/corelib/io/qiodevice.h:112: hidden overloaded virtual function
'QIODevice::reset' declared here
    virtual bool reset();
                 ^

Change-Id: I022d902147f9c8fb71bee8c3e21b963b2d7bec55
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>

Reimplement QGraphicsEffect::sourceChanged() properly

sourceChanged() takes one argument, not zero.

tests/auto/widgets/graphicsview/qgraphicseffectsource/tst_qgraphicseffectsource.cpp:125:
warning: 'CustomEffect::sourceChanged' hides overloaded virtual function
[-Woverloaded-virtual]
    void sourceChanged()
         ^
src/widgets/effects/qgraphicseffect.h:104:
hidden overloaded virtual function 'QGraphicsEffect::sourceChanged'
declared here
    virtual void sourceChanged(ChangeFlags flags);
                 ^

Change-Id: If227b7b79c4a2fc3d21f93e371510ddccb408d7d
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>

Reimplement QVariantAnimation::updateState() properly

The updateState() takes 2 arguments, not 1.

tests/benchmarks/gui/animation/qanimation/dummyanimation.h:54: warning:
'DummyAnimation::updateState' hides overloaded virtual function
[-Woverloaded-virtual]
    void updateState(State state);
         ^
src/corelib/animation/qvariantanimation.h:106: hidden overloaded virtual
function 'QVariantAnimation::updateState' declared here
    void updateState(QAbstractAnimation::State newState, QAbstractAnimation::State oldState);
         ^

Change-Id: Ieb2e4e0b1f017c51c4fed5bdb874ba30cb056916
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>

Reimplement QAbstractFileEngine::open() properly

The virtual function takes a QIODevice::OpenMode argument, not an int.

tests/auto/corelib/io/qfile/test/../tst_qfile.cpp:1942: warning:
'MyEngine::open' hides overloaded virtual function [-Woverloaded-
virtual]
    bool open(int ) { return false; }
         ^
src/corelib/io/qabstractfileengine.h:118: hidden overloaded virtual
function 'QAbstractFileEngine::open' declared here
    virtual bool open(QIODevice::OpenMode openMode);
                 ^

Change-Id: I92338dacb89c05d8c5cfbf8ce094dc519b84d3ba
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>

Convert macros to functions.

Change-Id: I43f4188d1c33cd5a07eb7a12bf3343af7e6a211f
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>

Port to list(APPEND)

Change-Id: I198622270324eea62dd5ad6343fdf7c89e736e6c
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>

Remove misleading and incorrect information from dropMimeData docs.

It is not the responsibility of the view to insert data into the
model after a dropMimeData call.

Change-Id: Ib2dedddb3239af0e2bf722a28081c68677e6b2af
Reviewed-by: David Faure <faure@kde.org>

Fix style in cmake macros files.

Change-Id: I2806ce63f5948dde9c582740bc2f070900987fb5
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>

Connect to the moved signals in the header view.

Change-Id: I6954f77ad7d02970f562abcbaf4e733c6d43ead5
Reviewed-by: David Faure <faure@kde.org>

Fix whitespace consistency.

Change-Id: Ia5debce8e5be4e9c67e1ef303e136816ab55bf90
Reviewed-by: David Faure <faure@kde.org>

Fix -tickcounter in qtestlib.

HAVE_TICK_COUNTER is supposed to be set (if possible) from cycle_p.h, so
guarding cycle_p.h's inclusion with HAVE_TICK_COUNTER ensures it will never be
set.

Change-Id: I6313d0a2efd47c89522623e8e7b3f505489ded90
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>

Remove mention of Trolltech in installation path.

Task-number: QTBUG-19653

Change-Id: Ic92e0bb4980af53568efe77ebc72e048ee5a32d7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Merge QReadWriteLock constructor overloads per Qt 5 comment.

Change-Id: I3b569b1240a0bc5b2589de353dbf62c175472448
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Add missing connections.

Unit tested in next commit.

Change-Id: Iab37829f98ef8f2258a30aed60e95aa114379b7e
Reviewed-by: David Faure <faure@kde.org>

Remove unused QPicture::detach_helper() private method.

QPicture doesn't need this for quite a long time now, so get rid of it.

Change-Id: Ie575f32555deb130f7b27e11a7617fb2b3dc4e43
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>

Remove non-const QMovie::cacheMode().

There's a const QMovie::cacheMode(), so having this makes no sense.

Change-Id: I0b6f20055fcbb28f3a21a8bc303f82543592c9c6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>

make QString::fromLatin1 partially inline

This allows us to benefit from compile time optimizations when calling
strlen()

Change-Id: If6694117e613a012fce97f8664e6b43005d255de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

fixqt4headers: Add QtCore to folders (for moved item models).

Change-Id: I71f805c618a888e654207fb29f68769f9d90db9b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>

Remove unused qInitResourceIO() method.

Was effectively removed in 4.x's 2e7d5def1fdabb5949fbffc629da500aa2bb78d7, but
couldn't be removed due to it being exported.

Change-Id: I5061f50deaeae7f53e8b688633e377095b4463c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Remove qt_image_id() and qt_image_colortable().

Both of these have been unused at least as far back as Qt 4.5 according to git
log -p.

Change-Id: I381024cb1621fbfdb806a62e1cc55ce13219ef17
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>

Adapt from input context mousehandler to input panel in QLineEdit

Change-Id: If14d0cc18188da1dbc8b152fa2fa9583ff03b3bc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>

Remove input context action support from editors

Relying on obsolete QInputContext API.

Change-Id: I954ccf57204cbb24ff5cec622384fa3b9932a079
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>

Remove QInputContext based test from QGraphicsItem tests

Was basically checking that a method call is a method call and
QApplication::setInputContext() sets the input context.

Change-Id: Ia8723fe245f2480d503f0140f61078dc074161fc
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>

Removed test for obsolete QInputContext

Change-Id: Idb3b909934434f8f55eb6e94aa814840ab628856
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>

Adapt from QInputContext interface to QInputPanel

Change-Id: I4143c3b516e7b0e46c706b8a6560bca9d8951572
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>

Add destructor to QPlatformFontDatabase.

Virtual functions deserve a virtual dtor.

Change-Id: I71b7ae3b7fb0aa1553a37a90dce6270740d49e32
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>