Merge tag 'drm-intel-gt-next-2021-01-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

UAPI Changes:
- Deprecate I915_PMU_LAST and optimize state tracking (Tvrtko)

  Avoid relying on last item ABI marker in i915_drm.h, add a
  comment to mark as deprecated.

Cross-subsystem Changes:

Core Changes:

Driver Changes:

- Restore clear residuals security mitigations for Ivybridge and
  Baytrail (Chris)
- Close #1858: Allow sysadmin to choose applied GPU security mitigations
  through i915.mitigations=... similar to CPU (Chris)
- Fix for #2024: GPU hangs on HSW GT1 (Chris)
- Fix for #2707: Driver hang when editing UVs in Blender (Chris, Ville)
- Fix for #2797: False positive GuC loading error message (Chris)
- Fix for #2859: Missing GuC firmware for older Cometlakes (Chris)
- Lessen probability of GPU hang due to DMAR faults [reason 7,
  next page table ptr is invalid] on Tigerlake (Chris)
- Fix REVID macros for TGL to fetch correct stepping (Aditya)
- Limit frequency drop to RPe on parking (Chris, Edward)
- Limit W/A 1406941453 to TGL, RKL and DG1 (Swathi)
- Make W/A 22010271021 permanent on DG1 (Lucas)
- Implement W/A 16011163337 to prevent a HS/DS hang on DG1 (Swathi)
- Only disable preemption on gen8 render engines (Chris)
- Disable arbitration around Braswell's PDP updates (Chris)
- Disable arbitration on no-preempt requests (Chris)
- Check for arbitration after writing start seqno before busywaiting (Chris)
- Retain default context state across shrinking (Venkata, CQ)
- Fix mismatch between misplaced vma check and vma insert for 32-bit
  addressing userspaces (Chris, CQ)
- Propagate error for vmap() failure instead kernel NULL deref (Chris)
- Propagate error from cancelled submit due to context closure
  immediately (Chris)
- Fix RCU race on HWSP tracking per request (Chris)
- Clear CMD parser shadow and GPU reloc batches (Matt A)

- Populate logical context during first pin (Maarten)
- Optimistically prune dma-resv from the shrinker (Chris)
- Fix for virtual engine ownership race (Chris)
- Remove timeslice suppression to restore fairness for virtual engines (Chris)
- Rearrange IVB/HSW workarounds properly between GT and engine (Chris)
- Taint the reset mutex with the shrinker (Chris)
- Replace direct submit with direct call to tasklet (Chris)
- Multiple corrections to virtual engine dequeue and breadcrumbs code (Chris)
- Avoid wakeref from potentially hard IRQ context in PMU (Tvrtko)
- Use raw clock for RC6 time estimation in PMU (Tvrtko)
- Differentiate OOM failures from invalid map types (Chris)
- Fix Gen9 to have 64 MOCS entries similar to Gen11 (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Remove livelock from "do_idle_maps" VT-d W/A (Chris)
- Cancel the preemption timeout early in case engine reset fails (Chris)
- Code flow optimization in the scheduling code (Chris)
- Clear the execlists timers upon reset (Chris)
- Drain the breadcrumbs just once (Chris, Matt A)
- Track the overall GT awake/busy time (Chris)
- Tweak submission tasklet flushing to avoid starvation (Chris)
- Track timelines created using the HWSP to restore on resume (Chris)
- Use cmpxchg64 for 32b compatilibity for active tracking (Chris)
- Prefer recycling an idle GGTT fence to avoid GPU wait (Chris)

- Restructure GT code organization for clearer split between GuC
  and execlists (Chris, Daniele, John, Matt A)
- Remove GuC code that will remain unused by new interfaces (Matt B)
- Restructure the CS timestamp clocks code to local to GT (Chris)
- Fix error return paths in perf code (Zhang)
- Replace idr_init() by idr_init_base() in perf (Deepak)
- Fix shmem_pin_map error path (Colin)
- Drop redundant free_work worker for GEM contexts (Chris, Mika)
- Increase readability and understandability of intel_workarounds.c (Lucas)
- Defer enabling the breadcrumb interrupt to after submission (Chris)
- Deal with buddy alloc block sizes beyond 4G (Venkata, Chris)
- Encode fence specific waitqueue behaviour into the wait.flags (Chris)
- Don't cancel the breadcrumb interrupt shadow too early (Chris)
- Cancel submitted requests upon context reset (Chris)
- Use correct locks in GuC code (Tvrtko)
- Prevent use of engine->wa_ctx after error (Chris, Matt R)

- Fix build warning on 32-bit (Arnd)
- Avoid memory leak if platform would have more than 16 W/A (Tvrtko)
- Avoid unnecessary #if CONFIG_PM in PMU code (Chris, Tvrtko)
- Improve debugging output (Chris, Tvrtko, Matt R)
- Make file local variables static (Jani)
- Avoid uint*_t types in i915 (Jani)
- Selftest improvements (Chris, Matt A, Dan)
- Documentation fixes (Chris, Jose)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
# drivers/gpu/drm/i915/gt/intel_breadcrumbs_types.h
# drivers/gpu/drm/i915/gt/intel_lrc.c
# drivers/gpu/drm/i915/gvt/mmio_context.h
# drivers/gpu/drm/i915/i915_drv.h
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210114152232.GA21588@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-intel-next-2021-01-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- PSR fixes and improvements for selective fetch (Jose)
- GVT build fixed and cleanup (Jani)
- RKL display fixes (Lee, Matt)
- DSI fix (Hans)
- Panel Power and Backlight fixes (Anshuman, Jani)
- RPM fix (Chris)
- Fix HTI port checking (Jose)
- Clean-up in cursor code (Ville)
- Once again, trying to use fast+narrow link on eDP (Ville)
- DG1 display fix (Matt)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112175151.GA90999@intel.com

Merge tag 'amd-drm-next-5.12-2021-01-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-01-08:

amdgpu:
- Rework IH ring handling on vega and navi
- Rework HDP handling for vega and navi
- swSMU documenation updates
- Overdrive support for Sienna Cichlid and newer asics
- swSMU updates for vangogh
- swSMU updates for renoir
- Enable FP16 on DCE8-11
- Misc code cleanups and bug fixes

radeon:
- Fixes for platforms that can't access PCI resources correctly
- Misc code cleanups

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108221811.3868-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/i915/selftests: fix the uint*_t types that have crept in

Always prefer the kernel types over stdint types in i915.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113141317.30765-1-jani.nikula@intel.com

drm/i915/gt: Rearrange ivb workarounds

Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113225144.30810-2-chris@chris-wilson.co.uk

drm/i915/gt: Rearrange vlv workarounds

Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113225144.30810-1-chris@chris-wilson.co.uk

drm/i915/gt: Replace open-coded intel_engine_stop_cs()

In the legacy ringbuffer submission, we still had an open-coded version
of intel_engine_stop_cs() with one additional verification step. Transfer
that verification to intel_engine_stop_cs() itself, and call it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113204709.15020-1-chris@chris-wilson.co.uk

drm/i915/selftests: Bump the scheduling error threshold for fast heartbeats

Since we are system_highpri_wq, we expected the heartbeat to be
scheduled promptly. However, we see delays of over 10ms upsetting our
assertions. Accept this as inevitable and bump the minimum error
threshold to 20ms (from 6 jiffies).

<6> [616.784749] rcs0: Heartbeat delay: 3570us [2802, 9188]
<6> [616.807790] bcs0: Heartbeat delay: 2111us [745, 4372]
<6> [616.853776] vcs0: Heartbeat delay: 6485us [2424, 11637]
<3> [616.859296] vcs0: Heartbeat delay was 6485us, expected less than 6000us
<3> [616.860901] i915/intel_heartbeat_live_selftests: live_heartbeat_fast failed with error -22

v2: More context from CI.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113163115.5740-2-chris@chris-wilson.co.uk

drm/i915/selftests: Force a failed engine reset

Inject a fault into the engine reset and check that the outstanding
requests are completed despite the failed reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113205049.22565-1-chris@chris-wilson.co.uk

drm/i915/guc: stop calling execlists_set_default_submission

Initialize all required entries from guc_set_default_submission, instead
of calling the execlists function. The previously inherited setup has
been copied over from the execlist code and simplified by removing the
execlists submission-specific parts.

v2: move setting of relative_mmio flag to engine_setup_common (Chris)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-5-daniele.ceraolospurio@intel.com

drm/i915/guc: init engine directly in GuC submission mode

Instead of starting the engine in execlists submission mode and then
switching to GuC, start directly in GuC submission mode. The initial
setup functions have been copied over from the execlists code
and simplified by removing the execlists submission-specific parts.

v2: remove unneeded unexpected starting state check (Chris)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-4-daniele.ceraolospurio@intel.com

drm/i915/guc: do not dump execlists state with GuC submission

GuC owns the execlists state and the context IDs used for submission, so
the status of the ports and the CSB entries are not something we control
or can decode from the i915 side, therefore we can avoid dumping it. A
follow-up patch will also stop setting the csb pointers when using GuC
submission.

GuC dumps all the required events in the GuC logs when verbosity is set
high enough.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-3-daniele.ceraolospurio@intel.com

drm/i915/guc: Delete GuC code unused in future patches

Delete GuC code unused in future patches that rewrite the GuC interface
to work with the new firmware. Most of the code deleted relates to
workqueues or execlist port. The code is safe to remove because we still
don't allow GuC submission to be enabled, even when overriding the
modparam, so it currently can't be reached.

The defines + structs for the process descriptor and workqueue remain.
Although the new GuC interface does not require either of these for the
normal submission path multi-lrc submission does. The usage of the
process descriptor and workqueue for multi-lrc will be quite different
from the code that is deleted in this patch. A future patch will
implement multi-lrc submission.

v2: add a code in the commit message about the code being safe to
remove (Chris)

Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113021236.8164-2-daniele.ceraolospurio@intel.com

drm/i915: move region_lmem under gt

Device local-memory should be thought of as part the GT, which means it
should also sit under gt/.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112164300.356524-1-matthew.auld@intel.com

drm/i915/lmem: make intel_region_lmem_ops static

There are no users outside of intel_region_lmem.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112172246.11933-1-jani.nikula@intel.com

drm/i915/region: make intel_region_map static

There are no users outside of intel_memory_region.c.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112170429.27619-1-jani.nikula@intel.com

drm/i915/gt: Perform an arbitration check before busywaiting

During igt_reset_nop_engine, it was observed that an unexpected failed
engine reset lead to us busywaiting on the stop-ring semaphore (set
during the reset preparations) on the first request afterwards. There was
no explicit MI_ARB_CHECK in this sequence as the presumption was that
the failed MI_SEMAPHORE_WAIT would itself act as an arbitration point.
It did not in this circumstance, so force it.

This patch is based on the assumption that the MI_SEMAPHORE_WAIT failure
to arbitrate is a rare Tigerlake bug, similar to the lite-restore vs
semaphore issues previously seen in the CS. The explicit MI_ARB_CHECK
should always ensure that there is at least one arbitration point in the
request before the MI_SEMAPHORE_WAIT to trigger the IDLE->ACTIVE event.
Upon processing that event, we will clear the stop-ring flag and release
the semaphore from its busywait.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-2-chris@chris-wilson.co.uk

drm/i915/gt: Check for arbitration after writing start seqno

On the off chance that we need to arbitrate before launching the
payload, perform the check after we signal the request is ready to
start. Assuming instantaneous processing of the CS event, the request
will then be treated as having started when we make the decisions as to
how to process that CS event.

v2: More commentary about the users of i915_request_started() as a
reminder about why we are marking the initial breadcrumb.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112100759.32698-1-chris@chris-wilson.co.uk

drm/i915/selftests: Allow huge_gem_object to kick the shrinker

A new fi-cml-dallium CI machine has 8G and apparently plenty free, yet
fails some selftests with ENOMEM. The failures all seem to be from
huge_gem_object which does not try very hard to allocate memory,
skipping reclaim entirely. Let's try a bit harder and direct reclaim
before failing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112020013.19464-1-chris@chris-wilson.co.uk

drm/i915/gem: Remove stolen node before releasing the region

If this stolen object holds the last reference to the region, we need to
remove our drm_mm_node before freeing the region's drm_mm.

<4> [431.679591] Memory manager not clean during takedown.
<4> [431.679633] WARNING: CPU: 0 PID: 110 at drivers/gpu/drm/drm_mm.c:999 drm_mm_takedown+0x51/0x100
<4> [431.679655] Modules linked in: i915 vgem btusb snd_hda_codec_hdmi btrtl btbcm btintel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio bluetooth coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ecdh_generic ecc r8169 realtek lpc_ich snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core snd_pcm pinctrl_cherryview prime_numbers [last unloaded: i915]
<4> [431.679883] CPU: 0 PID: 110 Comm: kworker/u4:3 Tainted: G     U            5.11.0-rc3-CI-CI_DRM_9583+ #1
<4> [431.679895] Hardware name:  /NUC5CPYB, BIOS PYBSWCEL.86A.0058.2016.1102.1842 11/02/2016
<4> [431.679905] Workqueue: i915 __i915_gem_free_work [i915]
<4> [431.680831] RIP: 0010:drm_mm_takedown+0x51/0x100
<4> [431.680850] Code: 44 24 08 65 48 33 04 25 28 00 00 00 0f 85 b6 00 00 00 48 83 c4 10 5b 5d 41 5c c3 48 89 fb 48 c7 c7 c8 b7 38 82 e8 00 d6 37 00 <0f> 0b 48 8b 3d 96 d5 d1 00 ba 00 10 00 00 be c0 0c 00 00 e8 d7 64
<4> [431.680862] RSP: 0018:ffffc90000ad7dc0 EFLAGS: 00010282
<4> [431.680879] RAX: 0000000000000000 RBX: ffff8881109aa140 RCX: 0000000000000001
<4> [431.680888] RDX: 0000000080000001 RSI: ffffffff8235a70f RDI: 00000000ffffffff
<4> [431.680897] RBP: ffff8881109aa178 R08: 0000000000000001 R09: 0000000000000001
<4> [431.680906] R10: 0000000025eaec48 R11: 00000000f5b271a7 R12: ffff88810a38ddc0
<4> [431.680916] R13: 00000000ffffffff R14: ffffffff82861b70 R15: ffff88810b715538
<4> [431.680925] FS:  0000000000000000(0000) GS:ffff88817b800000(0000) knlGS:0000000000000000
<4> [431.680935] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [431.680945] CR2: 000056377cfd7c48 CR3: 00000001045de000 CR4: 00000000001006f0
<4> [431.680954] Call Trace:
<4> [431.680977]  __intel_memory_region_destroy+0x24/0x50 [i915]
<4> [431.681340]  i915_gem_object_release_stolen+0x26/0x40 [i915]
<4> [431.681637]  __i915_gem_free_objects.isra.21+0x1ef/0x3b0 [i915]
<4> [431.681935]  process_one_work+0x270/0x5c0
<4> [431.682022]  worker_thread+0x37/0x380
<4> [431.682047]  ? process_one_work+0x5c0/0x5c0
<4> [431.682062]  kthread+0x146/0x170
<4> [431.682077]  ? kthread_park+0x80/0x80
<4> [431.682098]  ret_from_fork+0x22/0x30
<4> [431.682153] irq event stamp: 1872905
<4> [431.682162] hardirqs last  enabled at (1872911): [<ffffffff8112bd9a>] console_unlock+0x49a/0x580
<4> [431.682176] hardirqs last disabled at (1872916): [<ffffffff8112bd06>] console_unlock+0x406/0x580
<4> [431.682187] softirqs last  enabled at (1872850): [<ffffffff81e00342>] __do_softirq+0x342/0x48e
<4> [431.682201] softirqs last disabled at (1872845): [<ffffffff81c00f52>] asm_call_irq_on_stack+0x12/0x20
<4> [431.682214] ---[ end trace 5d3bcd818e2e3816 ]---
<3> [431.686188] [drm:drm_mm_takedown] *ERROR* node [0002d000 + 00004000]: inserted at
 drm_mm_insert_node_in_range+0x34a/0x5b0
 i915_gem_stolen_insert_node_in_range+0x7b/0xa0 [i915]
 _i915_gem_object_create_stolen+0x83/0xd0 [i915]
 i915_gem_object_create_region+0x61/0x140 [i915]
 intel_engine_create_ring+0x176/0x230 [i915]

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2927
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210112015000.16108-1-chris@chris-wilson.co.uk

drm/i915: Allow the sysadmin to override security mitigations

The clear-residuals mitigation is a relatively heavy hammer and under some
circumstances the user may wish to forgo the context isolation in order
to meet some performance requirement. Introduce a generic module
parameter to allow selectively enabling/disabling different mitigations.

To disable just the clear-residuals mitigation (on Ivybridge, Baytrail,
or Haswell) use the module parameter: i915.mitigations=auto,!residuals

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1858
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org # v5.7
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-3-chris@chris-wilson.co.uk

drm/i915/gt: Restore clear-residual mitigations for Ivybridge, Baytrail

The mitigation is required for all gen7 platforms, now that it does not
cause GPU hangs, restore it for Ivybridge and Baytrail.

Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Bloomfield Jon <jon.bloomfield@intel.com>
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-2-chris@chris-wilson.co.uk

drm/i915/gt: Limit VFE threads based on GT

MEDIA_STATE_VFE only accepts the 'maximum number of threads' in the
range [0, n-1] where n is #EU * (#threads/EU) with the number of threads
based on plaform and the number of EU based on the number of slices and
subslices. This is a fixed number per platform/gt, so appropriately
limit the number of threads we spawn to match the device.

v2: Oversaturate the system with tasks to force execution on every HW
thread; if the thread idles it is returned to the pool and may be reused
again before an unused thread.

v3: Fix more state commands, which was causing Baytrail to barf.
v4: STATE_CACHE_INVALIDATE requires a stall on Ivybridge

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2024
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Randy Wright <rwright@hpe.com>
Cc: stable@vger.kernel.org # v5.7+
Reviewed-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111225220.3483-1-chris@chris-wilson.co.uk

drm/i915/dg1: Update voltage swing tables for DP

DG1's vswing tables are the same for eDP and HDMI but have slight
differences from ICL/TGL for DP.

v2:
 - Use a "_hbr2_hbr3" suffix on the table name to make it more clear
   that the same table is used for both HBR2 and HBR3 link rates.
   (Swathi)

Bspec: 49291
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108222528.1954514-1-matthew.d.roper@intel.com
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>

drm/i915/selftests: Include engine name after reset failure

During igt_reset_nop_engine, an engine reset unexpectedly failed. For the
next time this happens, mention which engine that was.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111105735.21515-4-chris@chris-wilson.co.uk

drm/i915/gt: Disable arbitration around Braswell's pdp updates

Braswell's pdp workaround is full of dragons, that may be being angered
when they are interrupted. Let's not take that risk and disable
arbitration during the update.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210111105735.21515-1-chris@chris-wilson.co.uk

drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure

Some new eDP panels don't like to operate at the max parameters, and
instead we need to go for an optimal confiugration. That unfortunately
doesn't work with older eDP panels which are generally only guaranteed
to work at the max parameters.

To solve these two conflicting requirements let's start with the optimal
setup, and if that fails we start again with the max parameters. The
downside is probably an extra modeset when we switch strategies but
I don't see a good way to avoid that.

For a bit of history we first tried to go for the fast+narrow in
commit 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config
fast and narrow"). but that had to be reverted due to regression
on older panels in commit f11cb1c19ad0 ("drm/i915/dp: revert back
to max link rate and lane count on eDP"). So now we try to get
the best of both worlds by using both strategies.

v2: Deal with output_bpp and uapi vs. hw state split
    Reword some comments
v3: Rebase

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Cc: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Cc: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=105267
References: https://bugs.freedesktop.org/show_bug.cgi?id=109959
References: https://gitlab.freedesktop.org/drm/intel/issues/272
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107182026.24848-1-ville.syrjala@linux.intel.com

drm/i915: Fix checkpatch warns in cursor code

Eliminate checkpatch warnings from intel_cursor.c:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Possible repeated word: 'by'

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110175624.3524-2-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915: Fix HTI port checking

There was some misinterpretation of specification, when DDIX_USED is
set, the next bit means 0 for DP and 1 for HDMI.

Anyways this misinterpretation is not causing any issues, this change
is just to comply with specification.
Also as for us it do not matters if it is HDMI or DP, not checking the
port type that HTI is using.

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108134802.21280-1-jose.souza@intel.com

drm/i915/selftests: Fix some error codes

These error paths return success instead of negative error codes as
intended.

Fixes: c92724de6db1 ("drm/i915/selftests: Try to detect rollback during batchbuffer preemption")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/X/xMdcewtft7+QFM@mwanda

drm/i915/backlight: fix CPU mode backlight takeover on LPT

The pch_get_backlight(), lpt_get_backlight(), and lpt_set_backlight()
functions operate directly on the hardware registers. If inverting the
value is needed, using intel_panel_compute_brightness(), it should only
be done in the interface between hardware registers and
panel->backlight.level.

The CPU mode takeover code added in commit 5b1ec9ac7ab5
("drm/i915/backlight: Fix backlight takeover on LPT, v3.") reads the
hardware register and converts to panel->backlight.level correctly,
however the value written back should remain in the hardware register
"domain".

This hasn't been an issue, because GM45 machines are the only known
users of i915.invert_brightness and the brightness invert quirk, and
without one of them no conversion is made. It's likely nobody's ever hit
the problem.

Fixes: 5b1ec9ac7ab5 ("drm/i915/backlight: Fix backlight takeover on LPT, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108152841.6944-1-jani.nikula@intel.com

drm/i915: Refactor marking a request as EIO

When wedging the device, we cancel all outstanding requests and mark
them as EIO. Rather than duplicate the small function to do so between
each submission backend, export one.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-3-chris@chris-wilson.co.uk

drm/i915/gt: Mark up a debug-only function

drivers/gpu/drm/i915//gt/intel_workarounds.c:1394:20: error: function 'is_nonpriv_flags_valid' is not needed and will not be emitted [-Werror,-Wunneeded-internal-declaration]
static inline bool is_nonpriv_flags_valid(u32 flags)

This is only used by debug build, so mark it as maybe-unused to keep the
compiler from complaining.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-2-chris@chris-wilson.co.uk

drm/i915/gt: Remove unused function 'dword_in_page'

>> drivers/gpu/drm/i915/gt/intel_lrc.c:17:28: error: unused function 'dword_in_page' [-Werror,-Wunused-function]
   static inline unsigned int dword_in_page(void *addr)

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109163455.28466-1-chris@chris-wilson.co.uk

drm/i915/gt: Exercise lrc_wa_ctx initialisation failure

Inject a fault into lrc_init_wa_ctx() to ensure that we can tolerate a
failure to construct the workarounds.

v2: Avoid mentioning an error for fault-injection, other CI will
complain about the dmesg spam.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210109114453.27798-1-chris@chris-wilson.co.uk

drm/i915/gt: Disable arbitration on no-preempt requests

If a request is submitted and known to require no preemption, disable
arbitration around the batch which prevents the HW from handling a
preemption request during the payload.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-7-chris@chris-wilson.co.uk

drm/i915/gt: Only disable preemption on gen8 render engines

The reason why we did not enable preemption on Broadwater was due to
missing GPGPU workarounds. Since this only applies to rcs0, only
restrict rcs0 (and our global capabilities).

While this does not affect exposing a preemption capability to
userspace, it does affect our internal decisions on whether to use
timeslicing and semaphores between individual engines.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-6-chris@chris-wilson.co.uk

drm/i915/gt: Only retire on the last breadcrumb if the last request

We use the completion of the last active breadcrumb to retire the
requests along a timeline. This is purely opportunistic as nothing
guarantees that any particular timeline is terminated by a breadcrumb;
except for parking the engine where we explicitly add a breadcrumb so
that we park quickly and do an explicit retire upon signaling to reduce
the latency dramatically (avoiding a retire worker roundtrip).

With scheduling, we anticipate retiring completed timelines as a matter
of course. Performing the same action from inside the breadcrumbs is
intended to provide similar functionality for legacy ringbuffer
submission.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-5-chris@chris-wilson.co.uk

drm/i915/gt: Restore ce->signal flush before releasing virtual engine

Before we mark the virtual engine as no longer inflight, flush any
ongoing signaling that may be using the ce->signal_link along the
previous breadcrumbs. On switch to a new physical engine, that link will
be inserted into the new set of breadcrumbs, causing confusion to an
ongoing iterator.

This patch undoes a last minute mistake introduced into commit
bab0557c8dca ("drm/i915/gt: Remove virtual breadcrumb before transfer"),
whereby instead of unconditionally applying the flush, it was only
applied if the request itself was going to be reused.

v2: Generalise and cancel all remaining ce->signals

Fixes: bab0557c8dca ("drm/i915/gt: Remove virtual breadcrumb before transfer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-4-chris@chris-wilson.co.uk

drm/i915/selftests: Rearrange ktime_get to reduce latency against CS

In our tests where we measure the elapsed time on both the CPU and CS
using a udelay, our CS results match the udelay much more accurately
than the ktime (even when using ktime_get_fast_ns). With preemption
disabled, we can go one step lower than ktime and use local_clock.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2919
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-3-chris@chris-wilson.co.uk

drm/i915/selftests: Skip unstable timing measurements

If any of the perf tests run into 0 time, not only are we liable to
divide by zero, but the result would be highly questionable.
Nevertheless, let's not have a div-by-zero error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-2-chris@chris-wilson.co.uk

drm/i915/gt: Prevent use of engine->wa_ctx after error

On error we unpin and free the wa_ctx.vma, but do not clear any of the
derived flags. During lrc_init, we look at the flags and attempt to
dereference the wa_ctx.vma if they are set. To protect the error path
where we try to limp along without the wa_ctx, make sure we clear those
flags!

Reported-by: Matt Roper <matthew.d.roper@intel.com>
Fixes: 604a8f6f1e33 ("drm/i915/lrc: Only enable per-context and per-bb buffers if set")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-1-chris@chris-wilson.co.uk

drm/i915: Disable RPM wakeref assertions during driver shutdown

As with the regular suspend paths, also disable the wakeref assertions
as we disable the driver during shutdown.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2899
Fixes: fe0f1e3bfdfe ("drm/i915: Shut down displays gracefully on reboot")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104203905.19248-1-chris@chris-wilson.co.uk

drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)

This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in
amdgpu_device_asic_has_dc_support(). This info should be only called once.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu/display: fix build with CONFIG_DRM_AMD_DC_DCN disabled

dc_allow_idle_optimizations() needs to be protected by
CONFIG_DRM_AMD_DC_DCN.

Fixes: 71338cb4a7c2 ("drm/amd/display: enable idle optimizations for linux (MALL stutter)")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: modify the fine grain tuning function for Renoir

This patch is to improve the fine grain tuning function for Renoir.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together.
And the flag "od_enabled" is used to control the overdrive function for
dGPU, like navi10, navi14 and navi21.
APU like Renior or Vangogh uses this "od_enabled" to configure
the frequency range of gfx clock, but the max value of frequency
range will not be higher than the safe limit, it is not "overdrive".
So this patch adds two new flags -- "fine_grain_enabled" and
"fine_grain_started" to avoid this confusion, the flag will
make these two sysfs nodes work separately.
The flag "fine_grain_enabled" is set as "enabled" by default,
so the fine grain tuning function will be enabled by default.
But the flag "fine_grain_started" is set as "false" by default,
so the fine grain function will not take effect until it is set as
"true".
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag "fine_grain_started" will be set as "true",
and the fine grain tuning function will be started.
In other profile modes, including "auto", "high", "low", "profile_peak",
"profile_standard", "profile_min_sclk", "profile_min_mclk",
the flag "fine_grain_started" will be set as "false", and the od range of
fine grain tuning function will be restored default value.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add the parameters of power profiles for vangogh

This pacth is to add the parameters of power profiles for vangogh,
includeing "profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk".

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/psp: fix psp gfx ctrl cmds

psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux,
according to psp, linux cmds are not correct.

v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD.

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: check more client ids in interrupt handler

Add check for SExSH clients in kfd interrupt handler.

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct the read sclk for navi10

According to hw, after navi10,it runs in dfll mode, and should
read sclk from AverageGfxclkFrequency.

Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add new mode 2560x1440

Add one more 2k resolution which appears frequently in market.

Signed-off-by: Emily.Deng <Emily.Deng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/pps: Reuse POWER_DOMAIN_DISPLAY_CORE in pps_{lock, unlock}

We need a power_domain wakeref in pps_{lock,unlock} to prevent
a race while resetting pps state in intel_power_sequencer_reset().

intel_power_sequencer_reset() need a pps_mutex to access pps_pipe
but it can't grab pps_mutex due to deadlock with power_well
functions are called while holding pps_mutex.
intel_power_sequencer_reset() is called by power_well function
associated with legacy platforms like vlv and chv therefore re-use
the POWER_DOMAIN_DISPLAY_CORE power domain, which only used
by vlv and chv display power domain.

This will avoids the unnecessary noise of unrelated power wells
in pps_{lock,unlock}.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107112500.16216-1-anshuman.gupta@intel.com

Merge drm/drm-next into drm-intel-next

sync-up to not fall too much behind.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/gt: Remove timeslice suppression

In the next^W future patch, we remove the strict priority system and
continuously re-evaluate the relative priority of tasks. As such we need
to enable the timeslice whenever there is more than one context in the
pipeline. This simplifies the decision and removes some of the tweaks to
suppress timeslicing, allowing us to lift the timeslice enabling to a
common spot at the end of running the submission tasklet.

One consequence of the suppression is that it was reducing fairness
between virtual engines on an over saturated system; undermining the
principle for timeslicing.

v2: Commentary
v3: Commentary for the right cancel_timer()
v4: Add tracing for why we need a timeslice

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2802
Testcase: igt/gem_exec_balancer/fairslice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107132322.28373-1-chris@chris-wilson.co.uk

drm/i915: Wrap our timer_list.expires checking

Refactor our timer_list.expires checking into its own timer_active()
helper.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107123541.17153-1-chris@chris-wilson.co.uk

Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.

Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com

Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-next

- Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
- R-Car DU miscellaneous fixes
- Miscellaneous bridge and bridge bindings fixes
- Assorted misc driver cleanups
- Constify drm_driver for PCI devices

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com

Merge tag 'drm-intel-next-2021-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
- Suppress display warnings for old ifwi presend on our CI (Chris)
- OA/Perf related workaround (Lionel)
- Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)
- PSR improvements (Jose)
- HDR and other color changes on LSPCON (Uma, Ville)
- FBC fixes for TGL (Uma)
- Record plane update times for debugging (Chris)
- Refactor panel backlight control functions (Dave)
- Display power improvements (Imre)
- Add VRR register definition (Manasi)
- Atomic modeset improvements for bigjoiner pipes (Ville)
- Switch off the scanout during driver unregister (Chris)
- Clean-up DP's FEW enable (Manasi)
- Fix VDSCP slice count (Manasi)
- Fix and clean up around rc_model_size for DSC (Jani)
- Remove Type-C noisy debug warn message (Sean)
- Display HPD code clean-up (Ville)
- Refactor Intel Display (Dave)
- Start adding support for Intel's eDP backlight controls (Lyude)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com

drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence

Commit 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
added an intel_dsi_msleep() helper which skips sleeping if the
MIPI-sequences have a version of 3 or newer and the panel is in vid-mode;
and it moved a bunch of msleep-s over to this new helper.

This was based on my reading of the big comment around line 730 which
starts with "Panel enable/disable sequences from the VBT spec.",
where the "v3 video mode seq" column does not have any wait t# entries.

Given that this code has been used on a lot of different devices without
issues until now, it seems that my interpretation of the spec here is
mostly correct.

But now I have encountered one device, an Acer Aspire Switch 10 E
SW3-016, where the panel will not light up unless we do actually honor the
panel_on_delay after exexuting the MIPI_SEQ_PANEL_ON sequence.

What seems to set this model apart is that it is lacking a
MIPI_SEQ_DEASSERT_RESET sequence, which is where the power-on
delay usually happens.

Fix the panel not lighting up on this model by using an unconditional
msleep(panel_on_delay) instead of intel_dsi_msleep() when there is
no MIPI_SEQ_DEASSERT_RESET sequence.

Fixes: 25b4620ee822 ("drm/i915/dsi: Skip delays for v3 VBTs in vid-mode")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118124058.26021-1-hdegoede@redhat.com

Merge tag 'imx-drm-next-2021-01-04' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: fixes and drm managed resources

- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
  drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
  drmm_crtc_alloc_with_planes() for drm_encoder_init(),
  drm_simple_encoder_init(), drm_universal_plane_init(), and
  drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
  allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b684f ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de

Merge tag 'topic/dp-hdmi-2.1-pcon-2020-12-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Add support for DP-HDMI2.1 PCON

From the series cover letter:

This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651

This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).

With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.

This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.

Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com

Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.

Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.

Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.

Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com

drm/i915/rkl: Add DP vswing programming tables

The bspec has been updated with new vswing programming for RKL DP.  No
data is provided for HDMI or eDP, so for now we'll continue to assume
that those are the same as TGL.

Bspec: 49291
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218040535.45492-1-matthew.d.roper@intel.com
Reviewed-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>

Revert "drm/amd/display: Fix memory leaks in S3 resume"

This reverts commit a135a1b4c4db1f3b8cbed9676a40ede39feb3362.

This leads to blank screens on some boards after replugging a
display.  Revert until we understand the root cause and can
fix both the leak and the blank screen after replug.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211033
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1427
Cc: Stylon Wang <stylon.wang@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Andre Tomt <andre@tomt.net>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915/selftests: Improve handling of iomem around stolen

Use memset_io() on the iomem, and silence sparse as we copy from the
iomem to normal system pages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106123939.18435-2-chris@chris-wilson.co.uk

drm/i915/selftests: Break out of the lrc layout test after register mismatch

AFter detecting a register mismatch between the protocontext and the
image generated by HW, immediately break out of the double loop.
Otherwise we end up with a second confusing error message.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210106123939.18435-1-chris@chris-wilson.co.uk

drm/i915/rkl: new rkl ddc map for different PCH

After boot into kernel. Driver configured ddc pin mapping based on
predefined table in parse_ddi_port(). Now driver configure rkl
ddc pin mapping depends on icp_ddc_pin_map[]. Then this table will
give incorrect gmbus port number to cause HDMI can't work.

Refer to commit cd0a89527d06 ("drm/i915/rkl: Add DDC pin mapping").
Create two ddc pin table for rkl TGP and CMP pch. Then HDMI can
works properly on rkl.

v2: update patch based on latest dinq branch.
v3: update ddc table for RKL+TGP sku.
    RKL+CNP sku will load cnp_ddc_pin_map[] setting.
v4: modify the if/else judgment to avoid nesting.
v5: fix typo in v4.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2577
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117142629.28729-1-shawn.c.lee@intel.com

Merge tag 'gvt-next-fixes-2020-12-25' of https://github.com/intel/gvt-linux into drm-intel-next

gvt-next-fixes-2020-12-25

- Avoid one useless inline (Jani)
- make gvt header self-contained, fix CONFIG_DRM_I915_WERROR (Jani)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201225022009.GF16939@zhen-hp.sh.intel.com

drm/amdgpu: Add check to prevent IH overflow

Similar to commit <b82175750131>("drm/amdgpu: fix IH overflow on Vega10 v2").
When an ring buffer overflow happens the appropriate bit is set in the WPTR
register which is also written back to memory. But clearing the bit in the
WPTR doesn't trigger another memory writeback.

So what can happen is that we end up processing the buffer overflow over and
over again because the bit is never cleared. Resulting in a random system
lockup because of an infinite loop in an interrupt handler.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Defang Bo <bodefang@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: drop DCN support for aarch64

From Ard:

"Simply disabling -mgeneral-regs-only left and right is risky, given that
the standard AArch64 ABI permits the use of FP/SIMD registers anywhere,
and GCC is known to use SIMD registers for spilling, and may invent
other uses of the FP/SIMD register file that have nothing to do with the
floating point code in question. Note that putting kernel_neon_begin()
and kernel_neon_end() around the code that does use FP is not sufficient
here, the problem is in all the other code that may be emitted with
references to SIMD registers in it.

So the only way to do this properly is to put all floating point code in
a separate compilation unit, and only compile that unit with
-mgeneral-regs-only."

Disable support until the code can be properly refactored to support this
properly on aarch64.

Acked-by: Will Deacon <will@kernel.org>
Reported-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ras eeprom support for sienna cichlid

added I2C address and asic support flag

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix no bad_pages issue after umc ue injection

old code wrongly used the bad page status as the function return value,
which cause amdgpu_ras_badpages_read always return failed.

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix potential memory leak during navi12 deinitialization

Navi12 HDCP & DTM deinitialization needs continue to free bo if already
created though initialized flag is not set.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable fp16 also on DCE-8/10/11.

The hw supports fp16, this is not only useful for HDR,
but also for standard dynamic range displays, because
it allows to get more precise color reproduction with
about 11 - 12 bpc linear precision in the unorm range
0.0 - 1.0.

Working fp16 scanout+display (and HDR over HDMI) was
verified on a DCE-8 asic, so i assume that the more
recent DCE-10/11 will work equally well, now that
format-specific plane scaling constraints are properly
enforced, e.g., the inability of fp16 to scale on older
hw like DCE-8 to DCE-11.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Check plane scaling against format specific hw plane caps.

This takes hw constraints specific to pixel formats into account,
e.g., the inability of older hw to scale fp16 format framebuffers.

It should now allow safely to enable fp16 formats also on DCE-8,
DCE-10, DCE-11.0

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: take runtime pm reference when we attach a buffer

And drop it when we detach.  If the shared buffer is in vram,
we need to make sure we don't put the device into runtime
suspend.

Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Create and Destroy PSR resources for DCN302

We need these to support PSR on DCN302

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable idle optimizations for linux (MALL stutter)

[Why]
We can only use this feature when the display is idle. When active vblank
irq count is 0 we know all the displays are idle.

[How]
-Add a active vblank irq counter
-Update the counter when we enable/disable vblank irq
-if vblank irq count is 0 we can consider mall stutter

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update idle optimization handling

[How]
 - use dc interface instead of hwss interface in cursor functions, to keep
dc->idle_optimizations_allowed updated
 - add dc interface to check if idle optimizations might apply to a plane

Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix unused variable warning

Some of the newly added code is hidden inside of #ifdef
blocks, but one variable is unused when debugfs is disabled:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:8370:8: error: unused variable 'configure_crc' [-Werror,-Wunused-variable]

Change the #ifdef to an if(IS_ENABLED()) check to fix the warning
and avoid adding more #ifdefs.

Fixes: c920888c604d ("drm/amd/display: Expose new CRC window property")
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix comparison pointer to bool warning in dc.c

Fixes coccicheck warning:
drivers/gpu/drm/amd/display/dc/core/dc.c:1543:12-19: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:1496:14-42: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:971:15-48: WARNING: Comparison
to bool
drivers/gpu/drm/amd/display/dc/core/dc.c:976:15-44: WARNING: Comparison
to bool

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix macro name _AMDGPU_TRACE_H_ in preprocessor if condition

Add an underscore in amdgpu_trace.h line 24 "_AMDGPU_TRACE_H".

Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Chenyang Li <lichenyang@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu/drm/radeon: use DIV_ROUND_UP macro to do calculation

Don't open-code DIV_ROUND_UP() kernel macro.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove useless else if

Fix the following coccinelle report:
drivers/gpu/drm/amd/display/dc/dcn302/dcn302_resource.c:1357:6-8:
WARNING: possible condition with no effect (if == else)

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unused including <linux/version.h>

Remove including <linux/version.h> that don't need it.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: improve the fine grain tuning function for RV/RV2/PCO

This patch is to improve the fine grain tuning function for RV/RV2/PCO.
The fine grain tuning function uses the sysfs node -- pp_od_clk_voltage
to config gfxclk. Meanwhile, another sysfs
node -- power_dpm_force_perfomance_level also affects the gfx clk.
It will cause confusion when these two sysfs nodes works
together. So this patch adds one flag to avoid this confusion, the flag
will make these two sysfs nodes work separately.
The flag is set as "disabled" by default, so the fine grain tuning function
will be disabled by default.
Only when power_dpm_force_perfomance_level is changed to
"manual" mode, the flag will be set as "enabled",
and the fine grain tuning function will be enabled.
In other profile modes, including "auto", "high", "low",
"profile_peak", "profile_standard", "profile_min_sclk",
"profile_min_mclk", the flag will be set as "disabled",
and the od range of fine grain tuning function will
be restored default value.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable dclk/vclk dpm function in "auto" power profile for vangogh

This patch is to enable dclk/vclk dpm function in "auto" power profile
for vangogh.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do optimization for psp command submit

In the psp command submit logic,
the function msleep(1) delayed too long,
Changing it to usleep_range(10, 100) to
have a better performance.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix the failure when change power profile for renoir

This patch is to fix the failure when change power profile to
"profile_peak" for renoir.

Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant include of navi10_enum

Remove unnecessary include of navi10_enum header file.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant logic related HDP

Remove hdp_flush function from amdgpu_nbio struct as it have been unified
into hdp struct.
Remove the include about hdp register which was not used.
V2: Remove hdp golden setting which is unnecessary.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch hdp callback functions for hdp v5

Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: switch hdp callback functions for hdp v4

Switch to use the HDP functions which unified on hdp structure instead of
the scattered hdp callback functions.
V2: clean up hdp reset ras error count function.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add hdp version 5 functions

Unify hdp related function into hdp structure for hdp version 5.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add hdp version 4 functions

Unify hdp related function into hdp structure for hdp version 4.
V2: Add function to remap hdp registers for nbio version 6.1

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add amdgpu_hdp structure

amdgpu_hdp hold all the callbacks for hdp

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix potential NULL pointer when check_atom_bios() fails

Asic funcs pointer needs being checked whether is NULL. Because when
check_atom_bios() fails in req_init_data handshake, asic funcs pointer
is not initialized yet.

Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use GTT for uvd_get_create/destory_msg

On modern gpus, GTT (system memory) works as well here, and this may
also be a workaround for platforms which cannot map vram correctly.

Signed-off-by: chenli <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: use writel to avoid gcc optimization v3

When using e8860(gcn1) on arm64, the kernel crashed on drm/radeon:

[   11.240414] pc : __memset+0x4c/0x188
[   11.244101] lr : radeon_uvd_get_create_msg+0x114/0x1d0 [radeon]
[   11.249995] sp : ffff00000d7eb700
[   11.253295] x29: ffff00000d7eb700 x28: ffff8001f632a868
[   11.258585] x27: 0000000000040000 x26: ffff00000de00000
[   11.263875] x25: 0000000000000125 x24: 0000000000000001
[   11.269168] x23: 0000000000000000 x22: 0000000000000005
[   11.274459] x21: ffff00000df24000 x20: ffff8001f74b4000
[   11.279753] x19: 0000000000124000 x18: 0000000000000020
[   11.285043] x17: 0000000000000000 x16: 0000000000000000
[   11.290336] x15: ffff000009309000 x14: ffffffffffffffff
[   11.290340] x13: ffff0000094b6f88 x12: ffff0000094b6bd2
[   11.290343] x11: ffff00000d7eb700 x10: ffff00000d7eb700
[   11.306246] x9 : ffff00000d7eb700 x8 : ffff00000df2402c
[   11.306254] x7 : 0000000000000000 x6 : ffff0000094b626a
[   11.306257] x5 : 0000000000000000 x4 : 0000000000000004
[   11.306262] x3 : ffffffffffffffff x2 : 0000000000000fd4
[   11.306265] x1 : 0000000000000000 x0 : ffff00000df2402c
[   11.306272] Call trace:
[   11.306316]  __memset+0x4c/0x188
[   11.306638]  uvd_v1_0_ib_test+0x70/0x1c0 [radeon]
[   11.306758]  radeon_ib_ring_tests+0x54/0xe0 [radeon]
...

Obviously, the __memset call is generated by gcc(8.3.1). It optimizes
this for loop into memset. But this may break on some platforms which
cannot map device memory correctly. So, just invoke `writel` to handle this.

v3 (chk): minor cleanups in code and commit message

Signed-off-by: Chen Li <chenli@uniontech.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a GPU hang issue when remove device

When GFXOFF is enabled and GPU is idle, driver will fail to access some
registers. Therefore change to disable power gating before all access
registers with MMIO.

Dmesg log is as following:
amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device.
amdgpu: cp queue pipe 4 queue 0 preemption failed
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706
amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2
amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706

Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>