platform/kernel/u-boot.git
11 years agopowerpc/lib: fix unsafe register handling in wait_ticks
Mats Kärrman [Tue, 9 Apr 2013 15:10:59 +0000 (17:10 +0200)]
powerpc/lib: fix unsafe register handling in wait_ticks

If watchdog is enabled, the arch/powerpc/lib/ticks.S::wait_ticks() function
calls the function specified by the WATCHDOG_RESET macro.
The wait_ticks function depends on the registers r0, r6 and r7 being
preserved however that is not guaranteed, e.g. if the reset function is a
C function this will probably overwrite r0 and cause an endless loop.

The following patch changes to using r14+r15 instead of r6+r7 (to resemble
what would have been generated by a C compiler) and saves all necessary
registers on the stack.

The patch has been tested on a custom MPC5125 based machine using the 512x
powerpc architecture.

Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Joakim Tjernlund <joakim.tjernlund@transmode.se>
Tested-by: Stefan Roese <sr@denx.de>
11 years agopatman: Add Series-process-log tag to sort/uniq change logs
Simon Glass [Tue, 26 Mar 2013 13:09:44 +0000 (13:09 +0000)]
patman: Add Series-process-log tag to sort/uniq change logs

For some series with lots of changes it is annoying that duplicate change
log items are not caught. It is also helpful sometimes to sort the change
logs.

Add a Series-process-log tag to enable this, which can be placed in a
commit to control this.

The change to the Cc: line is to fix a checkpatch warning.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Add -a option to refrain from test-applying the patches
Simon Glass [Tue, 26 Mar 2013 13:09:43 +0000 (13:09 +0000)]
patman: Add -a option to refrain from test-applying the patches

Especially with the Linux kernel, it takes a long time (a minute or more)
to test-apply the patches, so patman becomes significantly less useful.
The only real problem that is found with this apply step is trailing spaces.
Provide a -a option to skip this step, for those working with clean patches.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Don't barf if the word 'commit' starts a line
Doug Anderson [Fri, 1 Mar 2013 11:11:07 +0000 (11:11 +0000)]
patman: Don't barf if the word 'commit' starts a line

Patman's regular expression for detecting the start of a
commit in a git log was a little simplistic and could be
confused if the git log itself had the word "commit" as
the start of a line (as this commit does).  Make patman
a little more robust.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Provide option to ignore bad aliases
Simon Glass [Tue, 26 Mar 2013 13:09:42 +0000 (13:09 +0000)]
patman: Provide option to ignore bad aliases

Often it happens that patches include tags which don't have aliases. It
is annoying that patman fails in this case, and provides no option to
continue other than adding empty tags to the .patman file.

Correct this by adding a '-t' option to ignore tags that don't exist.
Print a warning instead.

Since running the tests is not a common operation, move this to --test
instead, to reserve -t for this new option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agoMerge branch 'patman' of git://git.denx.de/u-boot-x86
Tom Rini [Mon, 8 Apr 2013 16:03:22 +0000 (12:03 -0400)]
Merge branch 'patman' of git://git.denx.de/u-boot-x86

11 years agocmd_sf: include header file common.h before div64.h
Mingkai Hu [Sun, 7 Apr 2013 22:13:32 +0000 (22:13 +0000)]
cmd_sf: include header file common.h before div64.h

The header file div64.h includes <asm/types.h> which defines
the phys_addr_t according to the macro CONFIG_PHYS_64BIT, while
the macro CONFIG_PHYS_64BIT is included in common.h which comes
after div64.h, so in order to get consistent type definition for
phys_addr_t, common.h should be included before div64.h, Or else,
the parameters of phys_addr_t type will be passed wrongly when
CONFIG_PHYS_64BIT is defined.

Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
11 years agocommon/cmd_test: Avoid macro expansion
York Sun [Thu, 4 Apr 2013 11:52:53 +0000 (11:52 +0000)]
common/cmd_test: Avoid macro expansion

cmd_test.c adds "true" and "false" as new commands. We need to avoid macro
expansion for U_BOOT_CMD.

Signed-off-by: York Sun <yorksun@freescale.com>
11 years agodfu: Increase DFU buffer size from 4MiB to 8MiB
Łukasz Majewski [Thu, 4 Apr 2013 04:32:58 +0000 (04:32 +0000)]
dfu: Increase DFU buffer size from 4MiB to 8MiB

Increase size of DMA buffer from 4MiB to 8MiB. This is necessary due to
uImage size increase.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
11 years agodfu:ext4:fix: Change ext4write command order of parameters
Łukasz Majewski [Thu, 4 Apr 2013 04:32:57 +0000 (04:32 +0000)]
dfu:ext4:fix: Change ext4write command order of parameters

Following commit:
"cmd_ext4: BREAK and correct ext4write parameter order"
SHA1:0171d52c410cbaa9290b1b214e695697c835bfe5

introduced cleanup of ext4write semantics to be consistent with other
filesystem's writing commands (e.g. fatwrite).
This commit provides correct ext4write command generation at DFU eMMC
code.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
11 years agoRevert "env: fix potential stack overflow in environment functions"
Tom Rini [Fri, 5 Apr 2013 18:55:21 +0000 (14:55 -0400)]
Revert "env: fix potential stack overflow in environment functions"

Wolfgang requested this be reverted and Rob agreed after further
discussion.  This was a symptom of a larger problem we need to deal
with.

This reverts commit 60d7d5a63189c9f77a190c9965861dc15482c2d0.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agobuildman - U-Boot multi-threaded builder and summary tool
Simon Glass [Wed, 3 Apr 2013 11:07:16 +0000 (11:07 +0000)]
buildman - U-Boot multi-threaded builder and summary tool

This tool handles building U-Boot to check that you have not broken it
with your patch series. It can build each individual commit and report
which boards fail on which commits, and which errors come up. It also
shows differences in image sizes due to particular commits.

Buildman aims to make full use of multi-processor machines.

Documentation and caveats are in tools/buildman/README.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Ignore all Gerrit Commit-* tags
Simon Glass [Wed, 3 Apr 2013 11:01:39 +0000 (11:01 +0000)]
patman: Ignore all Gerrit Commit-* tags

These tags are used by Gerrit, so let's ignore all of them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Minor help message/README fixes
Simon Glass [Tue, 26 Mar 2013 13:09:45 +0000 (13:09 +0000)]
patman: Minor help message/README fixes

A few of the help messages are not quite right, and there is a typo
in the README. Fix these.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Fix the comment in CheckTags to mention multiple tags
Simon Glass [Tue, 26 Mar 2013 13:09:41 +0000 (13:09 +0000)]
patman: Fix the comment in CheckTags to mention multiple tags

This comment is less than helpful. Since multiple tags are supported, add
an example of how multiple tags work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Don't allow spaces in tags
Simon Glass [Tue, 26 Mar 2013 13:09:40 +0000 (13:09 +0000)]
patman: Don't allow spaces in tags

At present something like:

   Revert "arm: Add cache operations"

will try to use

   Revert "arm

as a tag. Clearly this is wrong, so fix it.

If the revert is intended to be tagged, then the tag can come before
the revert, perhaps. Alternatively the 'Cc' tag can be used in the commit
messages.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Fix up checkpatch parsing to deal with 'CHECK' lines
Simon Glass [Tue, 26 Mar 2013 13:09:39 +0000 (13:09 +0000)]
patman: Fix up checkpatch parsing to deal with 'CHECK' lines

checkpatch has a new type of warning, a 'CHECK'. At present patman fails
with these, which makes it less than useful.

Add support for checks, making it backwards compatible with the old
checkpatch.

At the same time, clean up formatting of the CheckPatches() output,
fix erroneous "internal error" if multiple patches have warnings and
be more robust to new types of problems.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Add Cover-letter-cc tag to Cc cover letter to people
Simon Glass [Wed, 20 Mar 2013 16:43:00 +0000 (16:43 +0000)]
patman: Add Cover-letter-cc tag to Cc cover letter to people

The cover letter is sent to everyone who is on the Cc list for any of
the patches in the series. Sometimes it is useful to send just the cover
letter to additional people, so that they are aware of the series, but
don't need to wade through all the individual patches.

Add a new Cover-letter-cc tag for this purpose.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
11 years agopatman: Allow specifying the message ID your series is in reply to
Doug Anderson [Sun, 17 Mar 2013 10:31:04 +0000 (10:31 +0000)]
patman: Allow specifying the message ID your series is in reply to

Some versions of git don't seem to prompt you for the message ID that
your series is in reply to.  Allow specifying this from the command
line.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Make "Reviewed-by" an important tag
Doug Anderson [Fri, 15 Mar 2013 13:24:05 +0000 (13:24 +0000)]
patman: Make "Reviewed-by" an important tag

Although "Reviewed-by:" is a tag that gerrit adds, it's also a tag
used by upstream.  Stripping it is undesirable.  In fact, we should
treat it as important.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Add additional git utilties
Simon Glass [Sat, 15 Dec 2012 10:42:07 +0000 (10:42 +0000)]
patman: Add additional git utilties

Add methods to find out the commits in a branch, clone a repo and
fetch from a repo.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Allow reading metadata from a list of commits
Simon Glass [Sat, 15 Dec 2012 10:42:06 +0000 (10:42 +0000)]
patman: Allow reading metadata from a list of commits

We normally read from the current branch, but buildman will need to look
at commits from another branch. Allow the metadata to be read from any
list of commits, to provide this flexibility.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Allow commands to raise on error, or not
Simon Glass [Sat, 15 Dec 2012 10:42:05 +0000 (10:42 +0000)]
patman: Allow commands to raise on error, or not

Make raise_on_error a parameter so that we can control which commands
raise and which do not. If we get an error reading the alias file, just
continue.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Make command methods return a CommandResult
Simon Glass [Sat, 15 Dec 2012 10:42:04 +0000 (10:42 +0000)]
patman: Make command methods return a CommandResult

Rather than returning a list of things, return an object. That makes it
easier to access the returned items, and easier to extend the return
value later.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Add cros_subprocess library to manage subprocesses
Simon Glass [Sat, 15 Dec 2012 10:42:03 +0000 (10:42 +0000)]
patman: Add cros_subprocess library to manage subprocesses

This adds a new library on top of subprocess which permits access to
the subprocess output as it is being generated. We can therefore
give the illusion that a process is running independently, but still
monitor its output so that we know what is going on.

It is possible to display output on a terminal as it is generated
(a little like tee). The supplied output function is called with all
stdout/stderr data as it arrives.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Use bright ANSI colours by default
Simon Glass [Sat, 15 Dec 2012 10:42:02 +0000 (10:42 +0000)]
patman: Use bright ANSI colours by default

Rather than the rather dull colours, use bright versions which normally
look better and are easier to read.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agopatman: Use ANSI colours only when outputting to a terminal
Simon Glass [Sat, 15 Dec 2012 10:42:01 +0000 (10:42 +0000)]
patman: Use ANSI colours only when outputting to a terminal

It is easy to detect whether or not the process is connected to a terminal,
or piped to a file. Disable ANSI colours automatically when output is
not to a terminal.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-cfi-flash
Tom Rini [Thu, 4 Apr 2013 16:01:27 +0000 (12:01 -0400)]
Merge branch 'master' of git://denx.de/git/u-boot-cfi-flash

11 years agocfi_flash: Use uintptr_t for casts from u32 to void *
Stefan Roese [Wed, 3 Apr 2013 00:47:46 +0000 (02:47 +0200)]
cfi_flash: Use uintptr_t for casts from u32 to void *

This fixes this build warning:

Configuring for qemu_mips64 - Board: qemu-mips64, Options: SYS_BIG_ENDIAN
   text    data     bss     dec     hex filename
 215344   13082  218720  447146   6d2aa qemu_mips64/u-boot
cfi_flash.c: In function 'flash_map':
cfi_flash.c:217:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
11 years agoPrepare v2013.04-rc2 v2013.04-rc2
Tom Rini [Wed, 3 Apr 2013 19:02:40 +0000 (15:02 -0400)]
Prepare v2013.04-rc2

Signed-off-by: Tom Rini <trini@ti.com>
11 years agobiosemu: include <asm/io.h> header
Linus Walleij [Mon, 1 Apr 2013 22:14:14 +0000 (22:14 +0000)]
biosemu: include <asm/io.h> header

This makes sure we have inline functions such as inb/outb that
are used in these two files by including the arch-specific
<asm/io.h> header. However the ARM version does not provide the
accessors unless the config symbol __io is also defined so add
that in front of the include.

After this the bios emulator will compile on ARM systems.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
11 years agommc: don't allow extra cmdline arguments
Stephen Warren [Mon, 1 Apr 2013 11:50:28 +0000 (11:50 +0000)]
mmc: don't allow extra cmdline arguments

The "mmc rescan" command takes no arguments. However, executing
"mmc rescan 1" succeeds, leading the user to believe that MMC device 1
has been rescanned. In fact, the "current" MMC device has been
rescanned, and the current device may well not be 1. Add error-checking
to the "mmc" command to explicitly reject any extra command-line
arguments so that it's more obvious when U-Boot isn't doing what the
user thought they asked it to.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
11 years agoreplace last __bss_end__ occurrences with __bss_end
Albert ARIBAUD [Sat, 30 Mar 2013 00:19:53 +0000 (00:19 +0000)]
replace last __bss_end__ occurrences with __bss_end

Simon Glass' commit 3929fb0a141530551b3fce15ee08629f80d5ef2a,
which changed all occurrences of __bss__end__ into __bss_end,
left behind some untouched __bss_end__ occurrences in all 33
u-boot.lds.debug files, in board/mousse/u-boot.lds.ram and
in board/mousse/u-boot.lds.rom. These are replaced here.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
11 years agodisk: fix unaligned access in efi partitions
Marc Dietrich [Fri, 29 Mar 2013 07:57:10 +0000 (07:57 +0000)]
disk: fix unaligned access in efi partitions

start_sect is not aligned to a 4 byte boundary thus causing exceptions
on ARM platforms. Access this field via the get_unaligned_le32 macro.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
11 years agoREADME: document the requirements for CONFIG_SYS_HZ
Stephen Warren [Wed, 27 Mar 2013 17:06:41 +0000 (17:06 +0000)]
README: document the requirements for CONFIG_SYS_HZ

CONFIG_SYS_HZ must be 1000, and get_timer() must therefore return ms.
Document this.

README text provided by Tom Rini.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
11 years agobuild: Fix make errors generated when building 'distclean'
Vadim Bendebury [Wed, 27 Mar 2013 14:34:18 +0000 (14:34 +0000)]
build: Fix make errors generated when building 'distclean'

It was noticed that when `make distclean' is run, the make process
terminates with error reporting something like:

rm: cannot remove '/tmp/foobar/': Is a directory
make: *** [clobber] Error 1

The problem is that the list of files targeted for removal includes a
directory in case CONFIG_SPL_TARGET is not set.

The fix has been tested as follows:

 Ran several times the following sequence of commands:

     CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make O=/tmp/foobar smdk5250_config
     CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make O=/tmp/foobar distclean

 it did not cause an error, it used to before this change.

Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agoenv: fix potential stack overflow in environment functions
Rob Herring [Fri, 22 Mar 2013 11:26:21 +0000 (11:26 +0000)]
env: fix potential stack overflow in environment functions

Most of the various environment functions create CONFIG_ENV_SIZE buffers on
the stack. At least on ARM and PPC which have 4KB stacks, this can overflow
the stack if we have large environment sizes. So move all the buffers off
the stack to static buffers.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
11 years agoMAKEALL: Fix case substitution for old bash
York Sun [Fri, 22 Mar 2013 07:37:03 +0000 (07:37 +0000)]
MAKEALL: Fix case substitution for old bash

Bash ver 3.x doesn't support the parameter expansion with case
substitution. Use tr instead.

Signed-off-by: York Sun <yorksun@freescale.com>
Acked-by: Allen Martin <amartin@nvidia.com>
11 years agodts/Makefile: Build the user specified dts
Jagannadha Sutradharudu Teki [Thu, 28 Feb 2013 10:20:18 +0000 (10:20 +0000)]
dts/Makefile: Build the user specified dts

This patch provides a support to build the user specified dts.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agomtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices
Jagannadha Sutradharudu Teki [Fri, 1 Mar 2013 11:24:26 +0000 (16:54 +0530)]
mtd: cfi_flash: Write buffer size adjustment for M29EW Numonyx devices

This patch addjusted the write buffer size for M29EW devices those
are operated in 8-bit mode.

The M29EW devices seem to report the CFI information wrong when
it's in 8 bit mode.

There's an app note from Numonyx on this issue and there's a patch
in the open source as well for Linux, but it doesn't seem to be in mainline.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
11 years agomtd: cfi_flash: Fix CFI flash driver for 8-bit bus support
aaron.williams@caviumnetworks.com [Sun, 3 Mar 2013 11:15:05 +0000 (16:45 +0530)]
mtd: cfi_flash: Fix CFI flash driver for 8-bit bus support

This commit is based on that patch from aaron.williams@caviumnetworks.com
with same commit title. pulled the same code changes into current u-boot tree.

http://patchwork.ozlabs.org/patch/140863/
http://lists.denx.de/pipermail/u-boot/2011-April/089606.html

This patch corrects the addresses used when working with Spansion/AMD FLASH chips.
Addressing for 8 and 16 bits is almost identical except in the 16-bit case the
LSB of the address is always 0.  The confusion arose because the addresses
in the datasheet for 16-bit mode are word addresses but this code assumed it was
byte addresses.

I have only been able to test this on our Octeon boards which use either an 8-bit
or 16-bit bus.  I have not tested the case where there's an 8-bit part on a 16-bit
bus.

This patch also adds some delays as suggested by Spansion.

If a part can be both 8 and 16-bits, it forces it to work in 8-bit mode if an
8-bit bus is detected.

Apart from the pulled changes, fixed few minor code cleanups and tested
on 256M29EW, 512M29EW flashes.

Before this fix:
---------------
Bank # 1: CFI conformant flash (8 x 8)  Size: 64 MB in 512 Sectors
  AMD Standard command set, Manufacturer ID: 0xFF, Device ID: 0xFF
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

After this fix:
--------------
Bank # 1: CFI conformant flash (8 x 8)  Size: 64 MB in 512 Sectors
  AMD Standard command set, Manufacturer ID: 0x89, Device ID: 0x7E2301
  Erase timeout: 4096 ms, write timeout: 2 ms
  Buffer write timeout: 5 ms, buffer size: 1024 bytes

Signed-off-by: Aaron Williams <aaron.williams@caviumnetworks.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Tested-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
11 years agoConsolidate bool type
York Sun [Mon, 1 Apr 2013 18:29:11 +0000 (11:29 -0700)]
Consolidate bool type

'bool' is defined in random places. This patch consolidates them into a
single header file include/linux/types.h, using stdbool.h introduced in C99.

All other #define, typedef and enum are removed. They are all consistent with
true = 1, false = 0.

Replace FALSE, False with false. Replace TRUE, True with true.
Skip *.py, *.php, lib/* files.

Signed-off-by: York Sun <yorksun@freescale.com>
11 years agoMerge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
Tom Rini [Sun, 31 Mar 2013 12:43:12 +0000 (08:43 -0400)]
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

11 years agovideo: bcm2835: fix build issues
Anatolij Gustschin [Fri, 29 Mar 2013 13:00:13 +0000 (14:00 +0100)]
video: bcm2835: fix build issues

After merging LCD patches for v2013.04 the bcm2835 video
driver building is broken due to removal of many global
variables. Fix the driver.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
11 years agoMerge branch 'for-v2013.04'
Anatolij Gustschin [Fri, 29 Mar 2013 12:54:10 +0000 (13:54 +0100)]
Merge branch 'for-v2013.04'

Conflicts:
drivers/video/Makefile

Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agoRX-51: Add support for bootmenu
Pali Rohár [Thu, 7 Mar 2013 05:15:19 +0000 (05:15 +0000)]
RX-51: Add support for bootmenu

 * default bootmenu entries:
   attached kernel, internal eMMC memory, external SD card,
   u-boot boot order

 * in CONFIG_PREBOOT try load bootmenu.scr from first partition
   of internal eMMC memory (also known as MyDocs) which (should)
   overwrite default bootmenu entries

 * when keyboard slide is closed boot first menu entry

 * when keyborad slide is open show bootmenu

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agoNew command bootmenu: ANSI terminal boot menu support
Pali Rohár [Sat, 23 Mar 2013 14:53:08 +0000 (14:53 +0000)]
New command bootmenu: ANSI terminal boot menu support

The "bootmenu" command uses U-Boot menu interfaces and provides
a simple mechanism for creating menus with several boot items.
When running this command the menu will be assembled as defined
by a set of environment variables which contain a title and
command key-value pairs. The "Up" and "Down" keys are used for
navigation through the items. Current active menu item is
highlighted and can be selected using the "Enter" key.

The command interprets and generates various ANSI escape
sequencies, so for proper menu rendering and item selection
the used terminal should support them.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
[agust: various fixes and documentation updates]
Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agomenu: export menu_default_choice() function
Anatolij Gustschin [Sat, 23 Mar 2013 14:52:04 +0000 (14:52 +0000)]
menu: export menu_default_choice() function

Checking the default menu item and obtaining its data can
be useful in custom menu code. Export menu_default_choice()
function which serves this purpose.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agomenu: Add support for user defined item choice function
Pali Rohár [Sat, 23 Mar 2013 14:50:40 +0000 (14:50 +0000)]
menu: Add support for user defined item choice function

Selecting menu items is currently done in menu_interactive_choice()
by reading the user input strings from standard input.

Extend menu_interactive_choice() to support user defined function
for selecting menu items. This function and its argument can be
specified when creating the menu.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
11 years agoMerge branch 'u-boot/master' into 'u-boot-arm/master'
Albert ARIBAUD [Thu, 28 Mar 2013 17:50:01 +0000 (18:50 +0100)]
Merge branch 'u-boot/master' into 'u-boot-arm/master'

Conflicts:
drivers/spi/tegra20_sflash.c
include/fdtdec.h
lib/fdtdec.c

11 years agoarmv7: do not relocate _start twice
Vincent Stehlé [Fri, 15 Mar 2013 06:54:00 +0000 (06:54 +0000)]
armv7: do not relocate _start twice

The _start symbol is already relocated, so do not add the relocation the second
time in c_runtime_cpu_setup.

This fixes e.g. the abort exception handling path, which ended in double fault
due to bad address in VBAR.

Signed-off-by: Vincent Stehlé <v-stehle@ti.com>
Reported-by: Lubomir Popov <lpopov@mm-sol.com>
11 years agoARM: mmu: Set domain permissions to client access
R Sricharan [Mon, 4 Mar 2013 20:04:45 +0000 (20:04 +0000)]
ARM: mmu: Set domain permissions to client access

 The 'XN' execute never bit is set in the pagetables. This will
 prevent speculative prefetches to non executable regions. But the
 domain permissions are set as master in the DACR register.
 So the pagetable attribute for 'XN' is not effective. Change the
 permissions to client.

 This fixes lot of speculative prefetch aborts seen on OMAP5
 secure devices.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Tested-by: Vincent Stehle <v-stehle@ti.com>
Cc: Vincent Stehle <v-stehle@ti.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
11 years agoARM: mmu: Introduce weak dram_bank_setup function
R Sricharan [Mon, 4 Mar 2013 20:04:44 +0000 (20:04 +0000)]
ARM: mmu: Introduce weak dram_bank_setup function

Introduce a weak version of dram_bank_setup function
to allow a platform specific function.

This is used in the subsequent patch to setup dram region
without 'XN' attribute in order to enable the region
under client permissions.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Cc: Vincent Stehle <v-stehle@ti.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
11 years agoARM: cache: declare set_section_dcache
Vincent Stehlé [Mon, 4 Mar 2013 20:04:43 +0000 (20:04 +0000)]
ARM: cache: declare set_section_dcache

We declare the set_section_dcache function globally in the cache header, for
later use by e.g. machine specific code.

Signed-off-by: Vincent Stehlé <v-stehle <at> ti.com>
Cc: Tom Rini <trini <at> ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
11 years agoapx4devkit: change maintainer
Veli-Pekka Peltola [Wed, 20 Mar 2013 09:08:10 +0000 (09:08 +0000)]
apx4devkit: change maintainer

As I am no longer working for Bluegiga I will pass apx4devkit maintenance
to Lauri.

Signed-off-by: Veli-Pekka Peltola <veli-pekka.peltola@iki.fi>
Acked-by: Lauri Hintsala <lauri.hintsala@bluegiga.com>
11 years agoimage: Add support for Plan 9
Steven Stallion [Wed, 20 Mar 2013 06:31:35 +0000 (06:31 +0000)]
image: Add support for Plan 9

Signed-off-by: Steven Stallion <sstallion@gmail.com>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agocmd_ext4: BREAK and correct ext4write parameter order
Tom Rini [Wed, 20 Mar 2013 04:21:38 +0000 (04:21 +0000)]
cmd_ext4: BREAK and correct ext4write parameter order

The ext4write command was taking the in-memory address and filename path
in reverse order from the rest of the filesystem read and write
commands.  This corrects the order to be the same as fatload, etc.

Signed-off-by: Tom Rini <trini@ti.com>
11 years ago.checkpatch.conf: ignore udelay->usleep_range warnings
Matt Porter [Fri, 15 Mar 2013 10:43:48 +0000 (10:43 +0000)]
.checkpatch.conf: ignore udelay->usleep_range warnings

usleep_range() is a Linux facility, ignore it when udelay()
is encountered.

Signed-off-by: Matt Porter <mporter@ti.com>
11 years agocheckpatch.pl: Add 'debug' to the list of logFunctions
Tom Rini [Thu, 14 Mar 2013 05:36:13 +0000 (05:36 +0000)]
checkpatch.pl: Add 'debug' to the list of logFunctions

While the kernel mainly uses pr_debug(...), etc, for debug messages, we
use debug(...).  Add this to the list of logFunctions so that they are
correctly checked (and not warned against) for long string literals.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoenv_callback: Mark find_env_callback as static
Tom Rini [Tue, 12 Mar 2013 06:16:50 +0000 (06:16 +0000)]
env_callback: Mark find_env_callback as static

This is not called outside of env_callback.c so mark static, remove from
<env_callback.h>

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
11 years agoMAKEALL: allow regex matches for -s option
Stephen Warren [Tue, 5 Mar 2013 11:15:01 +0000 (11:15 +0000)]
MAKEALL: allow regex matches for -s option

This allows:

MAKEALL -s tegra

to replace:

MAKEALL -s tegra20 -s tegra30 -s tegra114

The following also works:

MAKEALL -s tegra -s omap

Signed-off-by: Stephen Warren <swarren@nvidia.com>
11 years agoMerge branch 'u-boot-tegra/master' into 'u-boot-arm/master'
Albert ARIBAUD [Tue, 26 Mar 2013 09:40:13 +0000 (10:40 +0100)]
Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'

11 years agoMerge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
Albert ARIBAUD [Tue, 26 Mar 2013 08:51:09 +0000 (09:51 +0100)]
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

11 years agoTegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boards
Tom Warren [Mon, 18 Mar 2013 21:52:26 +0000 (14:52 -0700)]
Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boards

Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load
a kernel off of an SD card OK, card detect works, and the env is now
stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agoTegra114: MMC: Add SD bus power-rail init routine
Tom Warren [Mon, 18 Mar 2013 21:51:20 +0000 (14:51 -0700)]
Tegra114: MMC: Add SD bus power-rail init routine

T114 requires SD bus power-rail bringup for the SDIO card on SDMMC3.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agoTegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
Tom Warren [Mon, 18 Mar 2013 21:47:55 +0000 (14:47 -0700)]
Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table

SDIO1 (the SD-card slot on Dalmore) needs to have its pads setup
before the MMC driver is added.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agoTegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now)
Tom Warren [Mon, 18 Mar 2013 21:46:46 +0000 (14:46 -0700)]
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now)

Took these values directly from the kernel dts files.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra114: dalmore: config: enable SPI
Allen Martin [Sat, 16 Mar 2013 18:58:14 +0000 (18:58 +0000)]
tegra114: dalmore: config: enable SPI

Turn on SPI in dalmore config file

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra114: add SPI driver
Allen Martin [Sat, 16 Mar 2013 18:58:13 +0000 (18:58 +0000)]
tegra114: add SPI driver

Add driver for tegra114 SPI controller.  This controller is not
compatible with either the tegra20 or tegra30 controllers, so it
requires a new driver.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra114: dalmore: fdt: enable dalmore SPI controller
Allen Martin [Sat, 16 Mar 2013 18:58:12 +0000 (18:58 +0000)]
tegra114: dalmore: fdt: enable dalmore SPI controller

Dalmore has a SPI flash part attached to controller 4, so enable
controller 4 and set to 25MHz.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra114: fdt: add SPI blocks
Allen Martin [Sat, 16 Mar 2013 18:58:11 +0000 (18:58 +0000)]
tegra114: fdt: add SPI blocks

Add nodes for t114 SPI controller hardware

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra114: fdt: add apbdma block
Allen Martin [Sat, 16 Mar 2013 18:58:10 +0000 (18:58 +0000)]
tegra114: fdt: add apbdma block

Add node for apbdma controller hardware.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra114: fdt: add compatible string for tegra114 SPI ctrl
Allen Martin [Sat, 16 Mar 2013 18:58:09 +0000 (18:58 +0000)]
tegra114: fdt: add compatible string for tegra114 SPI ctrl

Add "nvidia,tegra114-spi" to represent t114 SPI controller hardware.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agosf: winbond: add W25Q32DW
Allen Martin [Sat, 16 Mar 2013 18:58:08 +0000 (18:58 +0000)]
sf: winbond: add W25Q32DW

Add support for Winbond W25Q32DW 32Mbit part

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agospi: add common fdt SPI driver interface
Allen Martin [Sat, 16 Mar 2013 18:58:07 +0000 (18:58 +0000)]
spi: add common fdt SPI driver interface

Add a common interface to fdt based SPI drivers.  Each driver is
represented by a table entry in fdt_spi_drivers[].  If there are
multiple SPI drivers in the table, the first driver to return success
from spi_init() will be registered as the SPI driver.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra20: spi: move fdt probe to spi_init
Allen Martin [Sat, 16 Mar 2013 18:58:06 +0000 (18:58 +0000)]
tegra20: spi: move fdt probe to spi_init

Make the tegra20 SPI driver similar to the tegra30 (and soon to be
tegra114) SPI drivers in preparation of common fdt SPI driver front
end.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra: spi: pull register structs out of headers
Allen Martin [Sat, 16 Mar 2013 18:58:05 +0000 (18:58 +0000)]
tegra: spi: pull register structs out of headers

Move register structs from headers into .c files and use common name.
This is in preparation of making common fdt front end for SPI
drivers.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra: spi: remove non fdt support
Allen Martin [Sat, 16 Mar 2013 18:58:04 +0000 (18:58 +0000)]
tegra: spi: remove non fdt support

Remove non fdt support from tegra20 and tegra30 SPI drivers in
preparation of new common fdt based SPI driver front end.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra: spi: rename tegra SPI drivers
Allen Martin [Sat, 16 Mar 2013 18:58:03 +0000 (18:58 +0000)]
tegra: spi: rename tegra SPI drivers

Rename tegra SPI drivers to tegra20_flash and tegra20_slink in
preparation for commonization and addition of tegra114_spi.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agotegra: remove support for UART SPI switch
Allen Martin [Sat, 16 Mar 2013 18:58:02 +0000 (18:58 +0000)]
tegra: remove support for UART SPI switch

This feature was only used for tegra20 seaboard that had a pinmux
conflict on the SPI pins.  These boards were never manufactured, so
remove this support to clean up SPI driver.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
11 years agoMerge branch 'u-boot-ti/master' into 'u-boot-arm/master'
Albert ARIBAUD [Sun, 24 Mar 2013 16:52:22 +0000 (17:52 +0100)]
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

11 years agommc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used
Peter Korsgaard [Thu, 21 Mar 2013 04:00:04 +0000 (04:00 +0000)]
mmc: omap_hsmmc.c: only register getcd/getwp callbacks if gpio could be used

Gets rid of warnings from omap_gpio:
ERROR : check_gpio: invalid GPIO -1

(and undefined behaviour as the -1 error code is interpreted as gpio value)

Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
11 years agommc: mmc_getcd/getwp: use sensible defaults
Peter Korsgaard [Thu, 21 Mar 2013 04:00:03 +0000 (04:00 +0000)]
mmc: mmc_getcd/getwp: use sensible defaults

Let mmc_getcd() return true and mmc_getwp() false if mmc driver doesn't
provide handlers for them.

Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
[trini: Add braces around first if test in each case to fix warning]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoarm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP* platforms
Tom Rini [Thu, 14 Mar 2013 06:49:04 +0000 (06:49 +0000)]
arm: Correct CONFIG_STANDALONE_LOAD_ADDR for AM33XX/OMAP* platforms

All of these platforms have memory starting at 0x80000000, so this is
the correct CONFIG_STANDALONE_LOAD_ADDR for all of them.

Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoam335x_evm: Add better timings for the new BeagleBoard DDR3 part
Tom Rini [Thu, 21 Mar 2013 04:30:02 +0000 (04:30 +0000)]
am335x_evm: Add better timings for the new BeagleBoard DDR3 part

Tested-by: Rao Bodapati <rao@circuitco.com>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoti814x_evm: add ti814x evm board support
Matt Porter [Fri, 15 Mar 2013 10:07:10 +0000 (10:07 +0000)]
ti814x_evm: add ti814x evm board support

Add TI814X EVM board directory, config file, and MAINTAINERS
entry. Enable build.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Adapt to recent omap_hsmmc requirements, Matt re-tested]
Signed-off-by: Tom Rini <trini@ti.com>
11 years agons16550: enable quirks for ti814x
Matt Porter [Fri, 15 Mar 2013 10:07:09 +0000 (10:07 +0000)]
ns16550: enable quirks for ti814x

TI814X requires the same quirks as AM33XX to be enabled.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoam33xx: support ti814x mmc reference clock
Matt Porter [Fri, 15 Mar 2013 10:07:08 +0000 (10:07 +0000)]
am33xx: support ti814x mmc reference clock

TI814x has a 192MHz hsmmc reference clock. Select that clock rate
when building for TI814x.

Signed-off-by: Matt Porter <mporter@ti.com>
11 years agoam33xx: add dmm support to emif4 library
Matt Porter [Fri, 15 Mar 2013 10:07:07 +0000 (10:07 +0000)]
am33xx: add dmm support to emif4 library

Adds a config_dmm() routine to support TI814X DMM configuration.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoam33xx: add ti814x specific register definitions
Matt Porter [Fri, 15 Mar 2013 10:07:06 +0000 (10:07 +0000)]
am33xx: add ti814x specific register definitions

Support the ti814x specific register definitions within
arch-am33xx.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoam33xx: refactor am33xx mux support and add ti814x support
Matt Porter [Fri, 15 Mar 2013 10:07:05 +0000 (10:07 +0000)]
am33xx: refactor am33xx mux support and add ti814x support

AM33XX and TI814X have a similar mux though the pinmux register
layout and address space differ. Add a separate ti814x mux include
to support the TI814X-specific differences.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
11 years agoam33xx: refactor am33xx clocks and add ti814x support
Matt Porter [Fri, 15 Mar 2013 10:07:04 +0000 (10:07 +0000)]
am33xx: refactor am33xx clocks and add ti814x support

Split clock.c for am335x and ti814x and add ti814x specific
clock support.

Signed-off-by: Matt Porter <mporter@ti.com>
11 years agoam33xx: refactor emif4/ddr to support multiple EMIF instances
Matt Porter [Fri, 15 Mar 2013 10:07:03 +0000 (10:07 +0000)]
am33xx: refactor emif4/ddr to support multiple EMIF instances

The AM33xx emif4/ddr support closely matches what is need to support
TI814x except that TI814x has two EMIF instances. Refactor all the
emif4 helper calls and the config_ddr() init function to use an
additional instance number argument.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoam33xx: convert defines from am33xx-specific to generic names
Matt Porter [Fri, 15 Mar 2013 10:07:02 +0000 (10:07 +0000)]
am33xx: convert defines from am33xx-specific to generic names

Eliminate AM33xx specific names to prepare for TI814x support
within AM33xx-land.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoam33xx: Add required includes to some omap/am33xx code
Tom Rini [Thu, 14 Mar 2013 11:15:25 +0000 (11:15 +0000)]
am33xx: Add required includes to some omap/am33xx code

- In arch/arm/cpu/armv7/omap-common/timer.c,
  drivers/mtd/nand/omap_gpmc.c and drivers/net/cpsw.c add #include files
  that the driver needs but had been relying on <config.h> to bring in.
- In arch/arm/cpu/armv7/omap-common/lowlevel_init.S add <config.h>
- In am335x_evm.h and pcm051.h don't globally include
  <asm/arch/hardware.h> and <asm/arch/cpu.h> but just <asm/arch/omap.h>
  as that is the only include which defines things the config uses.

Cc: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Tom Rini <trini@ti.com>
11 years agoigep00x0: Enable CONFIG_CMD_BOOTZ
Enric Balletbo i Serra [Fri, 15 Mar 2013 02:32:35 +0000 (02:32 +0000)]
igep00x0: Enable CONFIG_CMD_BOOTZ

With v3.9 and later of the Linux Kernel defaulting to multi-platform
images with omap2plus_defconfig, uImage isn't builtable anymore by
default.  Add CONFIG_CMD_BOOTZ so that we can still boot something the
kernel spits out.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoARM: AM33XX: Fix typo that causes an AM duplication in CPU name.
Enric Balletbo i Serra [Fri, 15 Mar 2013 01:35:37 +0000 (01:35 +0000)]
ARM: AM33XX: Fix typo that causes an AM duplication in CPU name.

Just fix a typo displaying the CPU info. With CONFIG_DISPLAY_INFO we see
something like AMAM335X-GP rev 0 instead of AM335X-GP rev 0.

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
11 years agoam335x: Enable DDR PHY dynamic power down bit for DDR3 boards
Vaibhav Hiremath [Thu, 14 Mar 2013 21:11:16 +0000 (21:11 +0000)]
am335x: Enable DDR PHY dynamic power down bit for DDR3 boards

Enable DDR PHY dynamic power down bit, which enables
powering down the IO receiver when not performing read.

This also helps in reducing overall power consumption in
low power states (suspend/standby).

Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Satyanarayana, Sandhya <sandhya.satyanarayana@ti.com>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
11 years agoARM: tegra: enable workaround for ARM erratum 716044
Stephen Warren [Mon, 4 Mar 2013 13:29:41 +0000 (13:29 +0000)]
ARM: tegra: enable workaround for ARM erratum 716044

Tegra20 requires the workaround for this erratum. Enable it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
11 years agoARM: implement erratum 716044 workaround
Stephen Warren [Mon, 4 Mar 2013 13:29:40 +0000 (13:29 +0000)]
ARM: implement erratum 716044 workaround

Add common code to enable the workaround for ARM erratum 716044. This
will be enabled for Tegra.

Signed-off-by: Stephen Warren <swarren@nvidia.com>