Merge tag 'net-5.17-rc1' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf.

  Quite a handful of old regression fixes but most of those are
  pre-5.16.

  Current release - regressions:

   - fix memory leaks in the skb free deferral scheme if upper layer
     protocols are used, i.e. in-kernel TCP readers like TLS

  Current release - new code bugs:

   - nf_tables: fix NULL check typo in _clone() functions

   - change the default to y for Vertexcom vendor Kconfig

   - a couple of fixes to incorrect uses of ref tracking

   - two fixes for constifying netdev->dev_addr

  Previous releases - regressions:

   - bpf:
      - various verifier fixes mainly around register offset handling
        when passed to helper functions
      - fix mount source displayed for bpffs (none -> bpffs)

   - bonding:
      - fix extraction of ports for connection hash calculation
      - fix bond_xmit_broadcast return value when some devices are down

   - phy: marvell: add Marvell specific PHY loopback

   - sch_api: don't skip qdisc attach on ingress, prevent ref leak

   - htb: restore minimal packet size handling in rate control

   - sfp: fix high power modules without diagnostic monitoring

   - mscc: ocelot:
      - don't let phylink re-enable TX PAUSE on the NPI port
      - don't dereference NULL pointers with shared tc filters

   - smsc95xx: correct reset handling for LAN9514

   - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

   - phy: micrel: use kszphy_suspend/_resume for irq aware devices,
     avoid races with the interrupt

  Previous releases - always broken:

   - xdp: check prog type before updating BPF link

   - smc: resolve various races around abnormal connection termination

   - sit: allow encapsulated IPv6 traffic to be delivered locally

   - axienet: fix init/reset handling, add missing barriers, read the
     right status words, stop queues correctly

   - add missing dev_put() in sock_timestamping_bind_phc()

  Misc:

   - ipv4: prevent accidentally passing RTO_ONLINK to
     ip_route_output_key_hash() by sanitizing flags

   - ipv4: avoid quadratic behavior in netns dismantle

   - stmmac: dwmac-oxnas: add support for OX810SE

   - fsl: xgmac_mdio: add workaround for erratum A-009885"

* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
  ipv4: avoid quadratic behavior in netns dismantle
  net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
  powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
  dt-bindings: net: Document fsl,erratum-a009885
  net/fsl: xgmac_mdio: Add workaround for erratum A-009885
  net: mscc: ocelot: fix using match before it is set
  net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
  net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
  nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
  net: axienet: increase default TX ring size to 128
  net: axienet: fix for TX busy handling
  net: axienet: fix number of TX ring slots for available check
  net: axienet: Fix TX ring slot available check
  net: axienet: limit minimum TX ring size
  net: axienet: add missing memory barriers
  net: axienet: reset core on initialization prior to MDIO access
  net: axienet: Wait for PhyRstCmplt after core reset
  net: axienet: increase reset timeout
  bpf, selftests: Add ringbuf memory type confusion test
  ...

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:
 "55 patches.

  Subsystems affected by this patch series: percpu, procfs, sysctl,
  misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
  hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
  lib: remove redundant assignment to variable ret
  ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
  kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
  lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
  btrfs: use generic Kconfig option for 256kB page size limit
  arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
  configs: introduce debug.config for CI-like setup
  delayacct: track delays from memory compact
  Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
  delayacct: cleanup flags in struct task_delay_info and functions use it
  delayacct: fix incomplete disable operation when switch enable to disable
  delayacct: support swapin delay accounting for swapping without blkio
  panic: remove oops_id
  panic: use error_report_end tracepoint on warnings
  fs/adfs: remove unneeded variable make code cleaner
  FAT: use io_schedule_timeout() instead of congestion_wait()
  hfsplus: use struct_group_attr() for memcpy() region
  nilfs2: remove redundant pointer sbufs
  fs/binfmt_elf: use PT_LOAD p_align values for static PIE
  const_structs.checkpatch: add frequently used ops structs
  ...

lib: remove redundant assignment to variable ret

The variable ret is being assigned a value that is never read.  If the
for-loop is entered then ret is immediately re-assigned a new value.  If
the for-loop is not executed ret is never read.  The assignment is
redundant and can be removed.

Link: https://lkml.kernel.org/r/20211230134557.83633-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: remove CONFIG_UBSAN_OBJECT_SIZE

The object-size sanitizer is redundant to -Warray-bounds, and
inappropriately performs its checks at run-time when all information
needed for the evaluation is available at compile-time, making it quite
difficult to use:

  https://bugzilla.kernel.org/show_bug.cgi?id=214861

With -Warray-bounds almost enabled globally, it doesn't make sense to
keep this around.

Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR

Until recent versions of GCC and Clang, it was not possible to disable
KCOV instrumentation via a function attribute.  The relevant function
attribute was introduced in 540540d06e9d9 ("kcov: add
__no_sanitize_coverage to fix noinstr for all architectures").

x86 was the first architecture to want a working noinstr, and at the
time no compiler support for the attribute existed yet.  Therefore,
commit 0f1441b44e823 ("objtool: Fix noinstr vs KCOV") introduced the
ability to NOP __sanitizer_cov_*() calls in .noinstr.text.

However, this doesn't work for other architectures like arm64 and s390
that want a working noinstr per ARCH_WANTS_NO_INSTR.

At the time of 0f1441b44e823, we didn't yet have ARCH_WANTS_NO_INSTR,
but now we can move the Kconfig dependency checks to the generic KCOV
option.  KCOV will be available if:

- architecture does not care about noinstr, OR
- we have objtool support (like on x86), OR
- GCC is 12.0 or newer, OR
- Clang is 13.0 or newer.

Link: https://lkml.kernel.org/r/20211201152604.3984495-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB

Commit b05fbcc36be1 ("btrfs: disable build on platforms having page size
256K") disabled btrfs for configurations that used a 256kB page size.
However, it did not fully solve the problem because CONFIG_TEST_KMOD
selects CONFIG_BTRFS, which does not account for the dependency.  This
results in a Kconfig warning and the failed BUILD_BUG_ON error
returning.

  WARNING: unmet direct dependencies detected for BTRFS_FS
    Depends on [n]: BLOCK [=y] && !PPC_256K_PAGES && !PAGE_SIZE_256KB [=y]
    Selected by [m]:
    - TEST_KMOD [=m] && RUNTIME_TESTING_MENU [=y] && m && MODULES [=y] && NETDEVICES [=y] && NET_CORE [=y] && INET [=y] && BLOCK [=y]

To resolve this, add CONFIG_PAGE_SIZE_LESS_THAN_256KB as a dependency of
CONFIG_TEST_KMOD so there is no more invalid configuration or build
errors.

Link: https://lkml.kernel.org/r/20211129230141.228085-4-nathan@kernel.org
Fixes: b05fbcc36be1 ("btrfs: disable build on platforms having page size 256K")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

btrfs: use generic Kconfig option for 256kB page size limit

Use the newly introduced CONFIG_PAGE_SIZE_LESS_THAN_256KB to describe
the dependency introduced by commit b05fbcc36be1 ("btrfs: disable build
on platforms having page size 256K").

Link: https://lkml.kernel.org/r/20211129230141.228085-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB

Patch series "Fix CONFIG_TEST_KMOD with 256kB page size".

The kernel test robot reported a build error [1] from a failed assertion
in fs/btrfs/inode.c with a hexagon randconfig that includes
CONFIG_PAGE_SIZE_256KB.  This error is the same one that was addressed
by commit b05fbcc36be1 ("btrfs: disable build on platforms having page
size 256K") but CONFIG_TEST_KMOD selects CONFIG_BTRFS without having the
"page size less than 256kB dependency", which results in the error
reappearing.

The first patch introduces CONFIG_PAGE_SIZE_LESS_THAN_256KB by splitting
it off from CONFIG_PAGE_SIZE_LESS_THAN_64KB, which was introduced in
commit 1f0e290cc5fd ("arch: Add generic Kconfig option indicating page
size smaller than 64k") for a similar reason in 5.16-rc3.

The second patch uses that configuration option for CONFIG_BTRFS to
reduce duplication.

The third patch resolves the build error by adding
CONFIG_PAGE_SIZE_LESS_THAN_256KB as a dependency to CONFIG_TEST_KMOD so
that CONFIG_BTRFS does not get enabled under that invalid configuration.

[1]: https://lore.kernel.org/r/202111270255.UYOoN5VN-lkp@intel.com/

This patch (of 3):

btrfs requires a page size smaller than 256kB.  To use that dependency
in other places, introduce CONFIG_PAGE_SIZE_LESS_THAN_256KB and reuse
that dependency in CONFIG_PAGE_SIZE_LESS_THAN_64KB.

Link: https://lkml.kernel.org/r/20211129230141.228085-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211129230141.228085-2-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

configs: introduce debug.config for CI-like setup

Some general debugging features like kmemleak, KASAN, lockdep, UBSAN etc
help fix many viruses like a microscope.  On the other hand, those
features are scatter around and mixed up with more situational debugging
options making them difficult to consume properly.  This cold help
amplify the general debugging/testing efforts and help establish
sensitive default values for those options across the broad.  This could
also help different distros to collaborate on maintaining debug-flavored
kernels.

The config is based on years' experiences running daily CI inside the
largest enterprise Linux distro company to seek regressions on
linux-next builds on different bare-metal and virtual platforms.  It can
be used for example,

  $ make ARCH=arm64 defconfig debug.config

Since KASAN and KCSAN can't be enabled together, we will need to create
a separate one for KCSAN later as well.

Link: https://lkml.kernel.org/r/20211115134754.7334-1-quic_qiancai@quicinc.com
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: "Stephen Rothwell" <sfr@canb.auug.org.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: track delays from memory compact

Delay accounting does not track the delay of memory compact.  When there
is not enough free memory, tasks can spend a amount of their time
waiting for compact.

To get the impact of tasks in direct memory compact, measure the delay
when allocating memory through memory compact.

Also update tools/accounting/getdelays.c:

    / # ./getdelays_next  -di -p 304
    print delayacct stats ON
    printing IO accounting
    PID     304

    CPU             count     real total  virtual total    delay total  delay average
                      277      780000000      849039485       18877296          0.068ms
    IO              count    delay total  delay average
                        0              0              0ms
    SWAP            count    delay total  delay average
                        0              0              0ms
    RECLAIM         count    delay total  delay average
                        5    11088812685           2217ms
    THRASHING       count    delay total  delay average
                        0              0              0ms
    COMPACT         count    delay total  delay average
                        3          72758              0ms
    watch: read=0, write=0, cancelled_write=0

Link: https://lkml.kernel.org/r/1638619795-71451-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Zhang Wenya <zhang.wenya1@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact

Add thrashing page cache and direct compact related descriptions and
update the usage of getdelays userspace utility.

The following patches modifications have been updated:
https://lore.kernel.org/all/20190312102002.31737-4-jinpuwang@gmail.com/
https://lore.kernel.org/all/1638619795-71451-1-git-send-email-
wang.yong12@zte.com.cn/

Link: https://lkml.kernel.org/r/1639583021-92977-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: cleanup flags in struct task_delay_info and functions use it

Flags in struct task_delay_info is used to distinguish the difference
between swapin and blkio delay acountings.  But after patch "delayacct:
support swapin delay accounting for swapping without blkio", there is no
need to do that since swapin and blkio delay accounting use their own
functions.

Link: https://lkml.kernel.org/r/20211124065958.36703-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: fix incomplete disable operation when switch enable to disable

When a task is created after delayacct is enabled, kernel will do all
the delay accountings for that task.  The problems is if user disables
delayacct by set /proc/sys/kernel/task_delayacct to zero, only blkio
delay accounting is disabled.

Now disable all the kinds of delay accountings when
/proc/sys/kernel/task_delayacct sets to zero.

Link: https://lkml.kernel.org/r/20211123140342.32962-1-ran.xiaokai@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: support swapin delay accounting for swapping without blkio

Currently delayacct accounts swapin delay only for swapping that cause
blkio.  If we use zram for swapping, tools/accounting/getdelays can't
get any SWAP delay.

It's useful to get zram swapin delay information, for example to adjust
compress algorithm or /proc/sys/vm/swappiness.

Reference to PSI, it accounts any kind of swapping by doing its work in
swap_readpage(), no matter whether swapping causes blkio.  Let delayacct
do the similar work.

Link: https://lkml.kernel.org/r/20211112083813.8559-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: remove oops_id

The oops id has been added as part of the end of trace marker for the
kerneloops.org project.  The id is used to automatically identify
duplicate submissions of the same report.  Identical looking reports
with different a id can be considered as the same oops occurred again.

The early initialisation of the oops_id can create a warning if the
random core is not yet fully initialized.  On PREEMPT_RT it is
problematic if the id is initialized on demand from non preemptible
context.

The kernel oops project is not available since 2017.  Remove the oops_id
and use 0 in the output in case parser rely on it.

Link: https://bugs.debian.org/953172
Link: https://lkml.kernel.org/r/Ybdi16aP2NEugWHq@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: use error_report_end tracepoint on warnings

Introduce the error detector "warning" to the error_report event and use
the error_report_end tracepoint at the end of a warning report.

This allows in-kernel tests but also userspace to more easily determine
if a warning occurred without polling kernel logs.

[akpm@linux-foundation.org: add comma to enum list, per Andy]

Link: https://lkml.kernel.org/r/20211115085630.1756817-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/adfs: remove unneeded variable make code cleaner

Return value directly instead of taking this in a variable.

Link: https://lkml.kernel.org/r/20211210023211.424609-1-chi.minghao@zte.com.cn
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cm>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FAT: use io_schedule_timeout() instead of congestion_wait()

congestion_wait() in this context is just a sleep - block devices do not
support congestion signalling any more.

The goal for this wait, which was introduced in commit ae78bf9c4f5f
("[PATCH] add -o flush for fat") is to wait for any recently written
data to get to storage.  We currently have no direct mechanism to do
this, so a simple wait that behaves identically to the current
congestion_wait() is the best we can do.

This is a step towards removing congestion_wait()

Link: https://lkml.kernel.org/r/163936544519.22433.13400436295732112065@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: use struct_group_attr() for memcpy() region

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.

Add struct_group() to mark the "info" region (containing struct DInfo
and struct DXInfo structs) in struct hfsplus_cat_folder and struct
hfsplus_cat_file that are written into directly, so the compiler can
correctly reason about the expected size of the writes.

"pahole" shows no size nor member offset changes to struct
hfsplus_cat_folder nor struct hfsplus_cat_file.  "objdump -d" shows no
object code changes.

Link: https://lkml.kernel.org/r/20211119192851.1046717-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: remove redundant pointer sbufs

Pointer sbufs is being assigned a value but it's not being used later
on.  The pointer is redundant and can be removed.  Cleans up scan-build
static analysis warning:

  fs/nilfs2/page.c:203:8: warning: Although the value stored to 'sbufs'
    is used in the enclosing expression, the value is never actually read
    from 'sbufs' [deadcode.DeadStores]
        sbh = sbufs = page_buffers(src);

Link: https://lkml.kernel.org/r/20211211180955.550380-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/1640712476-15136-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf: use PT_LOAD p_align values for static PIE

Extend commit ce81bb256a22 ("fs/binfmt_elf: use PT_LOAD p_align values
for suitable start address") which fixed PIE binaries built with
-Wl,-z,max-page-size=0x200000, to cover static PIE binaries.  This
fixes:

    https://bugzilla.kernel.org/show_bug.cgi?id=215275

Tested by verifying static PIE binaries with -Wl,-z,max-page-size=0x200000 loading.

Link: https://lkml.kernel.org/r/20211209174052.370537-1-hjl.tools@gmail.com
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const_structs.checkpatch: add frequently used ops structs

Add commonly used structs (>50 instances) which are always or almost
always const.

Link: https://lkml.kernel.org/r/20211127101134.33101-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: improve Kconfig help test

The Kconfig help test erroneously counts patch context lines as part of
the help text.

Fix that and improve the message block output.

Link: https://lkml.kernel.org/r/06c0cdc157ae1502e8e9eb3624b9ea995cf11e7a.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: relax regexp for COMMIT_LOG_LONG_LINE

One exceptions to the COMMIT_LOG_LONG_LINE rule is a file path followed
by ':'.  That is typically some sort diagnostic message from a compiler
or a build tool, in which case we don't want to wrap the lines but keep
the message unmodified.

The regular expression used to match this pattern currently doesn't
accept absolute paths or + characters.  This can result in false
positives as in the following (out-of-tree) example:

  ...
  /home/jerome/work/optee_repo_qemu/build/../toolchains/aarch32/bin/arm-linux-gnueabihf-ld.bfd: /home/jerome/work/toolchains-gcc10.2/aarch32/bin/../lib/gcc/arm-none-linux-gnueabihf/10.2.1/../../../../arm-none-linux-gnueabihf/lib/libstdc++.a(eh_alloc.o): in function `__cxa_allocate_exception':
  /tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/src/gcc/libstdc++-v3/libsupc++/eh_alloc.cc:284: undefined reference to `malloc'
  ...

Update the regular expression to match the above paths.

Link: https://lkml.kernel.org/r/20210923143842.2837983-1-jerome@forissier.org
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test

Make do_kmem_cache_size_bulk() destroy the cache it creates.

Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com
Fixes: 03a9349ac0e0 ("lib/test_meminit: add a kmem_cache_alloc_bulk() test")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uuid: remove licence boilerplate text from the header

Remove licence boilerplate text from the UAPI header.

Link: https://lkml.kernel.org/r/20211216113552.81199-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uuid: discourage people from using UAPI header in new code

Discourage people from using UAPI header in new code by adding a note.

Link: https://lkml.kernel.org/r/20211216113552.81199-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kunit: replace kernel.h with the necessary inclusions

When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.

Replace kernel.h inclusion with the list of what is really being used.

Link: https://lkml.kernel.org/r/20211213204441.56204-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_hash.c: refactor into kunit

Use KUnit framework to make tests more easily integrable with CIs.  Even
though these tests are not yet properly written as unit tests this
change should help in debugging.

Also remove kernel messages (i.e.  through pr_info) as KUnit handles all
debugging output and let it handle module init and exit details.

Link: https://lkml.kernel.org/r/20211208183711.390454-6-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: David Gow <davidgow@google.com>
Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: properly split hash test kernel entries

Split TEST_HASH so that each entry only has one file.

Note that there's no stringhash test file, but actually
<linux/stringhash.h> tests are performed in lib/test_hash.c.

Link: https://lkml.kernel.org/r/20211208183711.390454-5-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_hash.c: split test_hash_init

Split up test_hash_init so that it calls each test more explicitly
insofar it is possible without rewriting the entire file.  This aims at
improving readability.

Split tests performed on string_or as they don't interfere with those
performed in hash_or.  Also separate pr_info calls about skipped tests
as they're not part of the tests themselves, but only warn about
(un)defined arch-specific hash functions.

Link: https://lkml.kernel.org/r/20211208183711.390454-4-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_hash.c: split test_int_hash into arch-specific functions

Split the test_int_hash function to keep its mainloop separate from
arch-specific chunks, which are only compiled as needed.  This aims at
improving readability.

Link: https://lkml.kernel.org/r/20211208183711.390454-3-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hash.h: remove unused define directive

Patch series "test_hash.c: refactor into KUnit", v3.

We refactored the lib/test_hash.c file into KUnit as part of the student
group LKCAMP [1] introductory hackathon for kernel development.

This test was pointed to our group by Daniel Latypov [2], so its full
conversion into a pure KUnit test was our goal in this patch series, but
we ran into many problems relating to it not being split as unit tests,
which complicated matters a bit, as the reasoning behind the original
tests is quite cryptic for those unfamiliar with hash implementations.

Some interesting developments we'd like to highlight are:

 - In patch 1/5 we noticed that there was an unused define directive
   that could be removed.

 - In patch 4/5 we noticed how stringhash and hash tests are all under
   the lib/test_hash.c file, which might cause some confusion, and we
   also broke those kernel config entries up.

Overall KUnit developments have been made in the other patches in this
series:

In patches 2/5, 3/5 and 5/5 we refactored the lib/test_hash.c file so as
to make it more compatible with the KUnit style, whilst preserving the
original idea of the maintainer who designed it (i.e.  George Spelvin),
which might be undesirable for unit tests, but we assume it is enough
for a first patch.

This patch (of 5):

Currently, there exist hash_32() and __hash_32() functions, which were
introduced in a patch [1] targeting architecture specific optimizations.
These functions can be overridden on a per-architecture basis to achieve
such optimizations.  They must set their corresponding define directive
(HAVE_ARCH_HASH_32 and HAVE_ARCH__HASH_32, respectively) so that header
files can deal with these overrides properly.

As the supported 32-bit architectures that have their own hash function
implementation (i.e.  m68k, Microblaze, H8/300, pa-risc) have only been
making use of the (more general) __hash_32() function (which only lacks
a right shift operation when compared to the hash_32() function), remove
the define directive corresponding to the arch-specific hash_32()
implementation.

[1] https://lore.kernel.org/lkml/20160525073311.5600.qmail@ns.sciencehorizons.net/

[akpm@linux-foundation.org: hash_32_generic() becomes hash_32()]

Link: https://lkml.kernel.org/r/20211208183711.390454-1-isabbasso@riseup.net
Link: https://lkml.kernel.org/r/20211208183711.390454-2-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_debug.c: print more list debugging context in __list_del_entry_valid()

Currently, the entry->prev and entry->next are considered to be valid as
long as they are not LIST_POISON{1|2}.  However, the memory may be
corrupted.  The prev->next is invalid probably because 'prev' is
invalid, not because prev->next's content is illegal.

Unfortunately, the printk and its subfunctions will modify the registers
that hold the 'prev' and 'next', and we don't see this valuable
information in the BUG context.

So print the contents of 'entry->prev' and 'entry->next'.

Here's an example:
  list_del corruption. prev->next should be c0ecbf74, but was c08410dc
  kernel BUG at lib/list_debug.c:53!
  ... ...
  PC is at __list_del_entry_valid+0x58/0x98
  LR is at __list_del_entry_valid+0x58/0x98
  psr: 60000093
  sp : c0ecbf30  ip : 00000000  fp : 00000001
  r10: c08410d0  r9 : 00000001  r8 : c0825e0c
  r7 : 20000013  r6 : c08410d0  r5 : c0ecbf74  r4 : c0ecbf74
  r3 : c0825d08  r2 : 00000000  r1 : df7ce6f4  r0 : 00000044
  ... ...
  Stack: (0xc0ecbf30 to 0xc0ecc000)
  bf20:                                     c0ecbf74 c0164fd0 c0ecbf70 c0165170
  bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
  bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
  bf80: c0e807c0 c018965c 00000000 c013f2a0 c0e807c0 c013f154 00000000 00000000
  bfa0: 00000000 00000000 00000000 c01001b0 00000000 00000000 00000000 00000000
  bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
  (__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
  (__list_del_entry) from (finish_swait+0x60/0x7c)
  (finish_swait) from (rcu_gp_kthread+0x560/0xa20)
  (rcu_gp_kthread) from (kthread+0x14c/0x15c)
  (kthread) from (ret_from_fork+0x14/0x24)

At first, I thought prev->next was overwritten.  Later, I carefully
analyzed the RCU code and the disassembly code.  The error occurred when
deleting a node from the list rcu_state.gp_wq.  The System.map shows
that the address of rcu_state is c0840c00.  Then I use gdb to obtain the
offset of rcu_state.gp_wq.task_list.

  (gdb) p &((struct rcu_state *)0)->gp_wq.task_list
  $1 = (struct list_head *) 0x4dc

Again:
  list_del corruption. prev->next should be c0ecbf74, but was c08410dc

  c08410dc = c0840c00 + 0x4dc = &rcu_state.gp_wq.task_list

Because rcu_state.gp_wq has at most one node, so I can guess that "prev
= &rcu_state.gp_wq.task_list".  But for other scenes, maybe I wasn't so
lucky, I cannot figure out the value of 'prev'.

Link: https://lkml.kernel.org/r/20211207025835.1909-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list: introduce list_is_head() helper and re-use it in list.h

Introduce list_is_head() in the similar (*) way as it's done for
list_entry_is_head().  Make use of it in the list.h.

*) it's done as inliner and not a macro to be aligned with other
   list_is_*() APIs; while at it, make all three to have the same
   style.

Link: https://lkml.kernel.org/r/20211201141824.81400-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kstrtox: uninline everything

I've made a mistake of looking into lib/kstrtox.o code generation.

The only function remotely performance critical is _parse_integer()
(via /proc/*/map_files/*), everything else is not.

Uninline everything, shrink lib/kstrtox.o by ~20 % !

Space savings on x86_64:

add/remove: 0/0 grow/shrink: 0/23 up/down: 0/-1269 (-1269 !!!)
Function                                     old     new   delta
kstrtoull                                     16      13      -3
kstrtouint                                    59      48     -11
kstrtou8                                      60      49     -11
kstrtou16                                     61      50     -11
_kstrtoul                                     46      35     -11
kstrtoull_from_user                           95      83     -12
kstrtoul_from_user                            95      83     -12
kstrtoll                                      93      80     -13
kstrtouint_from_user                         124      83     -41
kstrtou8_from_user                           125      83     -42
kstrtou16_from_user                          126      83     -43
kstrtos8                                     101      50     -51
kstrtos16                                    102      51     -51
kstrtoint                                    100      49     -51
_kstrtol                                      93      35     -58
kstrtobool_from_user                         156      75     -81
kstrtoll_from_user                           165      83     -82
kstrtol_from_user                            165      83     -82
kstrtoint_from_user                          172      83     -89
kstrtos8_from_user                           173      83     -90
kstrtos16_from_user                          174      83     -91
_parse_integer                               136      10    -126
_kstrtoull                                   308     101    -207
Total: Before=3421236, After=3419967, chg -0.04%

Link: https://lkml.kernel.org/r/YZDsFDhHst4m2Pnt@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_maintainer: don't remind about no git repo when --nogit is used

When --nogit is used with scripts/get_maintainer.pl, the script spews 4
lines of unnecessary information (noise).  Do not print those lines when
--nogit is specified.

This change removes the printing of these 4 lines:

  ./scripts/get_maintainer.pl: No supported VCS found.  Add --nogit to options?
  Using a git repository produces better results.
  Try Linus Torvalds' latest git repository using:
  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

Link: https://lkml.kernel.org/r/20220102031424.3328-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sys.c: only take tasklist_lock for get/setpriority(PRIO_PGRP)

PRIO_PGRP needs the tasklist_lock mainly to serialize vs setpgid(2), to
protect against any concurrent change_pid(PIDTYPE_PGID) that can move
the task from one hlist to another while iterating.

However, the remaining can only rely only on RCU:

PRIO_PROCESS only does the task lookup and never iterates over tasklist
and we already have an rcu-aware stable pointer.

PRIO_USER is already racy vs setuid(2) so with creds being rcu
protected, we can end up seeing stale data.  When removing the
tasklist_lock there can be a race with (i) fork but this is benign as
the child's nice is inherited and the new task is not observable by the
user yet either, hence the return semantics do not differ.  And (ii) a
race with exit, which is a small window and can cause us to miss a task
which was removed from the list and it had the highest nice.

Similarly change the buggy do_each_thread/while_each_thread combo in
PRIO_USER for the rcu-safe for_each_process_thread flavor, which doesn't
make use of next_thread/p->thread_group.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211210182250.43734-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kthread: dynamically allocate memory to store kthread's full name

When I was implementing a new per-cpu kthread cfs_migration, I found the
comm of it "cfs_migration/%u" is truncated due to the limitation of
TASK_COMM_LEN.  For example, the comm of the percpu thread on CPU10~19
all have the same name "cfs_migration/1", which will confuse the user.
This issue is not critical, because we can get the corresponding CPU
from the task's Cpus_allowed.  But for kthreads corresponding to other
hardware devices, it is not easy to get the detailed device info from
task comm, for example,

    jbd2/nvme0n1p2-
    xfs-reclaim/sdf

Currently there are so many truncated kthreads:

    rcu_tasks_kthre
    rcu_tasks_rude_
    rcu_tasks_trace
    poll_mpt3sas0_s
    ext4-rsv-conver
    xfs-reclaim/sd{a, b, c, ...}
    xfs-blockgc/sd{a, b, c, ...}
    xfs-inodegc/sd{a, b, c, ...}
    audit_send_repl
    ecryptfs-kthrea
    vfio-irqfd-clea
    jbd2/nvme0n1p2-
    ...

We can shorten these names to work around this problem, but it may be
not applied to all of the truncated kthreads.  Take 'jbd2/nvme0n1p2-'
for example, it is a nice name, and it is not a good idea to shorten it.

One possible way to fix this issue is extending the task comm size, but
as task->comm is used in lots of places, that may cause some potential
buffer overflows.  Another more conservative approach is introducing a
new pointer to store kthread's full name if it is truncated, which won't
introduce too much overhead as it is in the non-critical path.  Finally
we make a dicision to use the second approach.  See also the discussions
in this thread:
https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/

After this change, the full name of these truncated kthreads will be
displayed via /proc/[pid]/comm:

    rcu_tasks_kthread
    rcu_tasks_rude_kthread
    rcu_tasks_trace_kthread
    poll_mpt3sas0_statu
    ext4-rsv-conversion
    xfs-reclaim/sdf1
    xfs-blockgc/sdf1
    xfs-inodegc/sdf1
    audit_send_reply
    ecryptfs-kthread
    vfio-irqfd-cleanup
    jbd2/nvme0n1p2-8

Link: https://lkml.kernel.org/r/20211120112850.46047-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN

As the sched:sched_switch tracepoint args are derived from the kernel,
we'd better make it same with the kernel.  So the macro TASK_COMM_LEN is
converted to type enum, then all the BPF programs can get it through
BTF.

The BPF program which wants to use TASK_COMM_LEN should include the
header vmlinux.h.  Regarding the test_stacktrace_map and
test_tracepoint, as the type defined in linux/bpf.h are also defined in
vmlinux.h, so we don't need to include linux/bpf.h again.

Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/bpf/bpftool/skeleton: replace bpf_probe_read_kernel with bpf_probe_read_kernel_str to get task comm

bpf_probe_read_kernel_str() will add a nul terminator to the dst, then
we don't care about if the dst size is big enough.

Link: https://lkml.kernel.org/r/20211120112738.45980-7-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

samples/bpf/test_overhead_kprobe_kern: replace bpf_probe_read_kernel with bpf_probe_read_kernel_str to get task comm

bpf_probe_read_kernel_str() will add a nul terminator to the dst, then
we don't care about if the dst size is big enough.  This patch also
replaces the hard-coded 16 with TASK_COMM_LEN to make it grepable.

Link: https://lkml.kernel.org/r/20211120112738.45980-6-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf: replace open-coded string copy with get_task_comm

It is better to use get_task_comm() instead of the open coded string
copy as we do in other places.

struct elf_prpsinfo is used to dump the task information in userspace
coredump or kernel vmcore.  Below is the verification of vmcore,

  crash> ps
     PID    PPID  CPU       TASK        ST  %MEM     VSZ    RSS  COMM
        0      0   0  ffffffff9d21a940  RU   0.0       0      0  [swapper/0]
  >     0      0   1  ffffa09e40f85e80  RU   0.0       0      0  [swapper/1]
  >     0      0   2  ffffa09e40f81f80  RU   0.0       0      0  [swapper/2]
  >     0      0   3  ffffa09e40f83f00  RU   0.0       0      0  [swapper/3]
  >     0      0   4  ffffa09e40f80000  RU   0.0       0      0  [swapper/4]
  >     0      0   5  ffffa09e40f89f80  RU   0.0       0      0  [swapper/5]
        0      0   6  ffffa09e40f8bf00  RU   0.0       0      0  [swapper/6]
  >     0      0   7  ffffa09e40f88000  RU   0.0       0      0  [swapper/7]
  >     0      0   8  ffffa09e40f8de80  RU   0.0       0      0  [swapper/8]
  >     0      0   9  ffffa09e40f95e80  RU   0.0       0      0  [swapper/9]
  >     0      0  10  ffffa09e40f91f80  RU   0.0       0      0  [swapper/10]
  >     0      0  11  ffffa09e40f93f00  RU   0.0       0      0  [swapper/11]
  >     0      0  12  ffffa09e40f90000  RU   0.0       0      0  [swapper/12]
  >     0      0  13  ffffa09e40f9bf00  RU   0.0       0      0  [swapper/13]
  >     0      0  14  ffffa09e40f98000  RU   0.0       0      0  [swapper/14]
  >     0      0  15  ffffa09e40f9de80  RU   0.0       0      0  [swapper/15]

It works well as expected.

Some comments are added to explain why we use the hard-coded 16.

Link: https://lkml.kernel.org/r/20211120112738.45980-5-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/infiniband: replace open-coded string copy with get_task_comm

We'd better use the helper get_task_comm() rather than the open-coded
strlcpy() to get task comm.  As the comment above the hard-coded 16, we
can replace it with TASK_COMM_LEN.

Link: https://lkml.kernel.org/r/20211120112738.45980-4-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/exec: replace strncpy with strscpy_pad in __get_task_comm

If the dest buffer size is smaller than sizeof(tsk->comm), the buffer
will be without null ternimator, that may cause problem.  Using
strscpy_pad() instead of strncpy() in __get_task_comm() can make the
string always nul ternimated and zero padded.

Link: https://lkml.kernel.org/r/20211120112738.45980-3-laoar.shao@gmail.com
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/exec: replace strlcpy with strscpy_pad in __set_task_comm

Patch series "task comm cleanups", v2.

This patchset is part of the patchset "extend task comm from 16 to
24"[1].  Now we have different opinion that dynamically allocates memory
to store kthread's long name into a separate pointer, so I decide to
take the useful cleanups apart from the original patchset and send it
separately[2].

These useful cleanups can make the usage around task comm less
error-prone.  Furthermore, it will be useful if we want to extend task
comm in the future.

[1]. https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/
[2]. https://lore.kernel.org/lkml/CALOAHbAx55AUo3bm8ZepZSZnw7A08cvKPdPyNTf=E_tPqmw5hw@mail.gmail.com/

This patch (of 7):

strlcpy() can trigger out-of-bound reads on the source string[1], we'd
better use strscpy() instead.  To make it be robust against full tsk->comm
copies that got noticed in other places, we should make sure it's zero
padded.

[1] https://github.com/KSPP/linux/issues/89

Link: https://lkml.kernel.org/r/20211120112738.45980-1-laoar.shao@gmail.com
Link: https://lkml.kernel.org/r/20211120112738.45980-2-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel.h: include a note to discourage people from including it in headers

Include a note at the top to discourage people from including it in
headers.

Link: https://lkml.kernel.org/r/20211209150803.4473-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/unaligned: replace kernel.h with the necessary inclusions

When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.

Replace kernel.h inclusion with the list of what is really being used.

The rest of the changes are induced by the above and may not be split.

Link: https://lkml.kernel.org/r/20211209123823.20425-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> [brcmfmac]
Acked-by: Kalle Valo <kvalo@kernel.org>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com>
Cc: Wright Feng <wright.feng@infineon.com>
Cc: Chung-hsien Hsu <chung-hsien.hsu@infineon.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: remove redundant ret assignment

Subsequent if judgments will assign new values to ret, so the statement
here should be deleted

The clang_analyzer complains as follows:

  fs/proc/proc_sysctl.c:
  Value stored to 'ret' is never read

Link: https://lkml.kernel.org/r/20211230063622.586360-1-luo.penghao@zte.com.cn
Signed-off-by: luo penghao <luo.penghao@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: fix duplicate path separator in printed entries

sysctl_print_dir() always terminates the printed path name with a slash,
so printing a slash before the file part causes a duplicate like in

    sysctl duplicate entry: /kernel//perf_user_access

Fix this by dropping the extra slash.

Link: https://lkml.kernel.org/r/e3054d605dc56f83971e4b6d2f5fa63a978720ad.1641551872.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: convert the return type of proc_fd_access_allowed() to be boolean

Convert return type of proc_fd_access_allowed() and the 'allowed' in it
to be boolean since the return type of ptrace_may_access() is boolean.

Link: https://lkml.kernel.org/r/20211219024404.29779-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc: make the proc_create[_data]() stubs static inlines

Change the proc_create[_data]() stubs which are used when CONFIG_PROC_FS
is not set from #defines to a static inline stubs.

This should fix clang -Werror builds failing due to errors like this:

  drivers/platform/x86/thinkpad_acpi.c:918:30: error: unused variable
   'dispatch_proc_ops' [-Werror,-Wunused-const-variable]

Fixing this in include/linux/proc_fs.h should ensure that the same issue
is also fixed in any other drivers hitting the same -Werror issue.

[akpm@linux-foundation.org: fix CONFIG_PROC_FS=n]
[akpm@linux-foundation.org: fix arch/sparc/kernel/led.c]
[akpm@linux-foundation.org: fix build]

Link: https://lkml.kernel.org/r/20211116131112.508304-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

proc/vmcore: don't fake reading zeroes on surprise vmcore_cb unregistration

In commit cc5f2704c934 ("proc/vmcore: convert oldmem_pfn_is_ram callback
to more generic vmcore callbacks"), we added detection of surprise
vmcore_cb unregistration after the vmcore was already opened.  Once
detected, we warn the user and simulate reading zeroes from that point
on when accessing the vmcore.

The basic reason was that unexpected unregistration, for example, by
manually unbinding a driver from a device after opening the vmcore, is
not supported and could result in reading oldmem the vmcore_cb would
have actually prohibited while registered.  However, something like that
can similarly be trigger by a user that's really looking for trouble
simply by unbinding the relevant driver before opening the vmcore -- or
by disallowing loading the driver in the first place.  So it's actually
of limited help.

Currently, unregistration can only be triggered via virtio-mem when
manually unbinding the driver from the device inside the VM; there is no
way to trigger it from the hypervisor, as hypervisors don't allow for
unplugging virtio-mem devices -- ripping out system RAM from a VM
without coordination with the guest is usually not a good idea.

The important part is that unbinding the driver and unregistering the
vmcore_cb while concurrently reading the vmcore won't crash the system,
and that is handled by the rwsem.

To make the mechanism more future proof, let's remove the "read zero"
part, but leave the warning in place.  For example, we could have a
future driver (like virtio-balloon) that will contact the hypervisor to
figure out if we already populated a page for a given PFN.
Hotunplugging such a device and consequently unregistering the vmcore_cb
could be triggered from the hypervisor without harming the system even
while kdump is running.  In that case, we don't want to silently end up
with a vmcore that contains wrong data, because the user inside the VM
might be unaware of the hypervisor action and might easily miss the
warning in the log.

Link: https://lkml.kernel.org/r/20211111192243.22002-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: percpu: add generic pcpu_populate_pte() function

With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to
populate pte, this patch adds a generic pcpu populate pte function,
pcpu_populate_pte(), which is marked __weak and used on most
architectures, but it is overridden on x86, which has its own
implementation.

Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: percpu: add generic pcpu_fc_alloc/free funciton

With the previous patch, we could add a generic pcpu first chunk
allocate and free function to cleanup the duplicated definations on each
architecture.

Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: percpu: add pcpu_fc_cpu_to_node_fn_t typedef

Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu
first chunk allocation will call it to alloc memblock on the
corresponding node by it, this is prepare for the next patch.

Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: percpu: generalize percpu related config

Patch series "mm: percpu: Cleanup percpu first chunk function".

When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator.  This patchset is aimed to cleanup them and should no function
change.

The currently supported status about 'embed' and 'page' in Archs shows
below,

embed: NEED_PER_CPU_PAGE_FIRST_CHUNK
page:  NEED_PER_CPU_EMBED_FIRST_CHUNK

embed page
------------------------
arm64   Y  Y
mips   Y  N
powerpc   Y  Y
riscv   Y  N
sparc   Y  Y
x86   Y  Y
------------------------

There are two interfaces about percpu first chunk allocator,

 extern int __init pcpu_embed_first_chunk(size_t reserved_size, size_t dyn_size,
                                size_t atom_size,
                                pcpu_fc_cpu_distance_fn_t cpu_distance_fn,
-                               pcpu_fc_alloc_fn_t alloc_fn,
-                               pcpu_fc_free_fn_t free_fn);
+                               pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);

 extern int __init pcpu_page_first_chunk(size_t reserved_size,
-                               pcpu_fc_alloc_fn_t alloc_fn,
-                               pcpu_fc_free_fn_t free_fn,
-                               pcpu_fc_populate_pte_fn_t populate_pte_fn);
+                               pcpu_fc_cpu_to_node_fn_t cpu_to_nd_fn);

The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().

1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
   provided when archs supported NUMA.

2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
   a generic pcpu_populate_pte() which marked '__weak' is provided, if you
   need a different function to populate pte on the arch(like x86), please
   provide its own implementation.

[1] https://github.com/kevin78/linux.git percpu-cleanup

This patch (of 4):

The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.

Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.

Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'ipv4-avoid-pathological-hash-tables'

Eric Dumazet says:

====================
ipv4: avoid pathological hash tables

This series speeds up netns dismantles on hosts
having many active netns, by making sure two hash tables
used for IPV4 fib contains uniformly spread items.

v2: changed second patch to add fib_info_laddrhash_bucket()
    for consistency (David Ahern suggestion).
====================

Link: https://lore.kernel.org/r/20220119100413.4077866-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys

net/ipv4/fib_semantics.c uses a hash table (fib_info_laddrhash)
in which fib_sync_down_addr() can locate fib_info
based on IPv4 local address.

This hash table is resized based on total number of
hashed fib_info, but the hash function is only
using the local address.

For hosts having many active network namespaces,
all fib_info for loopback devices (IPv4 address 127.0.0.1)
are hashed into a single bucket, making netns dismantles
very slow.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv4: avoid quadratic behavior in netns dismantle

net/ipv4/fib_semantics.c uses an hash table of 256 slots,
keyed by device ifindexes: fib_info_devhash[DEVINDEX_HASHSIZE]

Problem is that with network namespaces, devices tend
to use the same ifindex.

lo device for instance has a fixed ifindex of one,
for all network namespaces.

This means that hosts with thousands of netns spend
a lot of time looking at some hash buckets with thousands
of elements, notably at netns dismantle.

Simply add a per netns perturbation (net_hash_mix())
to spread elements more uniformely.

Also change fib_devindex_hashfn() to use more entropy.

Fixes: aa79e66eee5d ("net: Make ifindex generation per-net namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge branch 'net-fsl-xgmac_mdio-add-workaround-for-erratum-a-009885'

Tobias Waldekranz says:

====================
net/fsl: xgmac_mdio: Add workaround for erratum A-009885

The individual messages mostly speak for themselves.

It is very possible that there are more chips out there that are
impacted by this, but I only have access to the errata document for
the T1024 family, so I've limited the DT changes to the exact FMan
version used in that device. Hopefully someone from NXP can supply a
follow-up if need be.

The final commit is an unrelated fix that was brought to my attention
by sparse.
====================

Link: https://lore.kernel.org/r/20220118215054.2629314-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module

As reported by sparse: In the remove path, the driver would attempt to
unmap its own priv pointer - instead of the io memory that it mapped
in probe.

Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses

This block is used in (at least) T1024 and T1040, including their
variants like T1023 etc.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

dt-bindings: net: Document fsl,erratum-a009885

Update FMan binding documentation with the newly added workaround for
erratum A-009885.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net/fsl: xgmac_mdio: Add workaround for erratum A-009885

Once an MDIO read transaction is initiated, we must read back the data
register within 16 MDC cycles after the transaction completes. Outside
of this window, reads may return corrupt data.

Therefore, disable local interrupts in the critical section, to
maximize the probability that we can satisfy this requirement.

Fixes: d55ad2967d89 ("powerpc/mpc85xx: Create dts components for the FSL QorIQ DPAA FMan")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mscc: ocelot: fix using match before it is set

Clang static analysis reports this issue
ocelot_flower.c:563:8: warning: 1st function call argument
  is an uninitialized value
    !is_zero_ether_addr(match.mask->dst)) {
    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The variable match is used before it is set.  So move the
block.

Fixes: 75944fda1dfe ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices

On a setup with KSZ9131 and MACB drivers it happens on suspend path, from
time to time, that the PHY interrupt arrives after PHY and MACB were
suspended (PHY via genphy_suspend(), MACB via macb_suspend()). In this
case the phy_read() at the beginning of kszphy_handle_interrupt() will
fail (as MACB driver is suspended at this time) leading to phy_error()
being called and a stack trace being displayed on console. To solve this
.suspend/.resume functions for all KSZ devices implementing
.handle_interrupt were replaced with kszphy_suspend()/kszphy_resume()
which disable/enable interrupt before/after calling
genphy_suspend()/genphy_resume().

The fix has been adapted for all KSZ devices which implements
.handle_interrupt but it has been tested only on KSZ9131.

Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

Both versions of the CPSW driver declare a CPSW_HEADROOM_NA macro that
takes NET_IP_ALIGN into account, but fail to use it appropriately when
storing incoming packets in memory. This results in the IPv4 source and
destination addresses to appear misaligned in memory, which causes
aligment faults that need to be fixed up in software.

So let's switch from CPSW_HEADROOM to CPSW_HEADROOM_NA where needed.
This gets rid of any alignment faults on the RX path on a Beaglebone
White.

Fixes: 9ed4050c0d75 ("net: ethernet: ti: cpsw: add XDP support")
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()

Syzbot detected a NULL pointer dereference of nfc_llcp_sock->dev pointer
(which is a 'struct nfc_dev *') with calls to llcp_sock_sendmsg() after
a failed llcp_sock_bind(). The message being sent is a SOCK_DGRAM.

KASAN report:

  BUG: KASAN: null-ptr-deref in nfc_alloc_send_skb+0x2d/0xc0
  Read of size 4 at addr 00000000000005c8 by task llcp_sock_nfc_a/899

  CPU: 5 PID: 899 Comm: llcp_sock_nfc_a Not tainted 5.16.0-rc6-next-20211224-00001-gc6437fbf18b0 #125
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x45/0x59
   ? nfc_alloc_send_skb+0x2d/0xc0
   __kasan_report.cold+0x117/0x11c
   ? mark_lock+0x480/0x4f0
   ? nfc_alloc_send_skb+0x2d/0xc0
   kasan_report+0x38/0x50
   nfc_alloc_send_skb+0x2d/0xc0
   nfc_llcp_send_ui_frame+0x18c/0x2a0
   ? nfc_llcp_send_i_frame+0x230/0x230
   ? __local_bh_enable_ip+0x86/0xe0
   ? llcp_sock_connect+0x470/0x470
   ? llcp_sock_connect+0x470/0x470
   sock_sendmsg+0x8e/0xa0
   ____sys_sendmsg+0x253/0x3f0
   ...

The issue was visible only with multiple simultaneous calls to bind() and
sendmsg(), which resulted in most of the bind() calls to fail.  The
bind() was failing on checking if there is available WKS/SDP/SAP
(respective bit in 'struct nfc_llcp_local' fields).  When there was no
available WKS/SDP/SAP, the bind returned error but the sendmsg() to such
socket was able to trigger mentioned NULL pointer dereference of
nfc_llcp_sock->dev.

The code looks simply racy and currently it protects several paths
against race with checks for (!nfc_llcp_sock->local) which is NULL-ified
in error paths of bind().  The llcp_sock_sendmsg() did not have such
check but called function nfc_llcp_send_ui_frame() had, although not
protected with lock_sock().

Therefore the race could look like (same socket is used all the time):
  CPU0                                     CPU1
  ====                                     ====
  llcp_sock_bind()
  - lock_sock()
    - success
  - release_sock()
  - return 0
                                           llcp_sock_sendmsg()
                                           - lock_sock()
                                           - release_sock()
  llcp_sock_bind(), same socket
  - lock_sock()
    - error
                                           - nfc_llcp_send_ui_frame()
                                             - if (!llcp_sock->local)
    - llcp_sock->local = NULL
    - nfc_put_device(dev)
                                             - dereference llcp_sock->dev
  - release_sock()
  - return -ERRNO

The nfc_llcp_send_ui_frame() checked llcp_sock->local outside of the
lock, which is racy and ineffective check.  Instead, its caller
llcp_sock_sendmsg(), should perform the check inside lock_sock().

Reported-and-tested-by: syzbot+7f23bcddf626e0593a39@syzkaller.appspotmail.com
Fixes: b874dec21d1c ("NFC: Implement LLCP connection less Tx path")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'axienet-fixes'

Robert Hancock says:

====================
Xilinx axienet fixes

Various fixes for the Xilinx AXI Ethernet driver.

Changed since v2:
-added Reviewed-by tags, added some explanation to commit
messages, no code changes

Changed since v1:
-corrected a Fixes tag to point to mainline commit
-split up reset changes into 3 patches
-added ratelimit on netdev_warn in TX busy case
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: increase default TX ring size to 128

With previous changes to make the driver handle the TX ring size more
correctly, the default TX ring size of 64 appears to significantly
bottleneck TX performance to around 600 Mbps on a 1 Gbps link on ZynqMP.
Increasing this to 128 seems to bring performance up to near line rate and
shouldn't cause excess bufferbloat (this driver doesn't yet support modern
byte-based queue management).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: fix for TX busy handling

Network driver documentation indicates we should be avoiding returning
NETDEV_TX_BUSY from ndo_start_xmit in normal cases, since it requires
the packets to be requeued. Instead the queue should be stopped after
a packet is added to the TX ring when there may not be enough room for an
additional one. Also, when TX ring entries are completed, we should only
wake the queue if we know there is room for another full maximally
fragmented packet.

Print a warning if there is insufficient space at the start of start_xmit,
since this should no longer happen.

Combined with increasing the default TX ring size (in a subsequent
patch), this appears to recover the TX performance lost by previous changes
to actually manage the TX ring state properly.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: fix number of TX ring slots for available check

The check for the number of available TX ring slots was off by 1 since a
slot is required for the skb header as well as each fragment. This could
result in overwriting a TX ring slot that was still in use.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: Fix TX ring slot available check

The check for whether a TX ring slot was available was incorrect,
since a slot which had been loaded with transmit data but the device had
not started transmitting would be treated as available, potentially
causing non-transmitted slots to be overwritten. The control field in
the descriptor should be checked, rather than the status field (which may
only be updated when the device completes the entry).

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: limit minimum TX ring size

The driver will not work properly if the TX ring size is set to below
MAX_SKB_FRAGS + 1 since it needs to hold at least one full maximally
fragmented packet in the TX ring. Limit setting the ring size to below
this value.

Fixes: 8b09ca823ffb4 ("net: axienet: Make RX/TX ring sizes configurable")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: add missing memory barriers

This driver was missing some required memory barriers:

Use dma_rmb to ensure we see all updates to the descriptor after we see
that an entry has been completed.

Use wmb and rmb to avoid stale descriptor status between the TX path and
TX complete IRQ path.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: reset core on initialization prior to MDIO access

In some cases where the Xilinx Ethernet core was used in 1000Base-X or
SGMII modes, which use the internal PCS/PMA PHY, and the MGT
transceiver clock source for the PCS was not running at the time the
FPGA logic was loaded, the core would come up in a state where the
PCS could not be found on the MDIO bus. To fix this, the Ethernet core
(including the PCS) should be reset after enabling the clocks, prior to
attempting to access the PCS using of_mdio_find_device.

Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: Wait for PhyRstCmplt after core reset

When resetting the device, wait for the PhyRstCmplt bit to be set
in the interrupt status register before continuing initialization, to
ensure that the core is actually ready. When using an external PHY, this
also ensures we do not start trying to access the PHY while it is still
in reset. The PHY reset is initiated by the core reset which is
triggered just above, but remains asserted for 5ms after the core is
reset according to the documentation.

The MgtRdy bit could also be waited for, but unfortunately when using
7-series devices, the bit does not appear to work as documented (it
seems to behave as some sort of link state indication and not just an
indication the transceiver is ready) so it can't really be relied on for
this purpose.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: axienet: increase reset timeout

The previous timeout of 1ms was too short to handle some cases where the
core is reset just after the input clocks were started, which will
be introduced in an upcoming patch. Increase the timeout to 50ms. Also
simplify the reset timeout checking to use read_poll_timeout.

Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'f2fs-for-5.17-rc1' of git://git./linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've tried to address some performance issues in
  f2fs_checkpoint and direct IO flows. Also, there was a work to enhance
  the page cache management used for compression. Other than them, we've
  done typical work including sysfs, code clean-ups, tracepoint, sanity
  check, in addition to bug fixes on corner cases.

  Enhancements:
   - use iomap for direct IO
   - try to avoid lock contention to improve f2fs_ckpt speed
   - avoid unnecessary memory allocation in compression flow
   - POSIX_FADV_DONTNEED drops the page cache containing compression
     pages
   - add some sysfs entries (gc_urgent_high_remaining, pending_discard)

  Bug fixes:
   - try not to expose unwritten blocks to user by DIO (this was added
     to avoid merge conflict; another patch is coming to address other
     missing case)
   - relax minor error condition for file pinning feature used in
     Android OTA
   - fix potential deadlock case in compression flow
   - should not truncate any block on pinned file

  In addition, we've done some code clean-ups and tracepoint/sanity
  check improvement"

* tag 'f2fs-for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
  f2fs: do not allow partial truncation on pinned file
  f2fs: remove redunant invalidate compress pages
  f2fs: Simplify bool conversion
  f2fs: don't drop compressed page cache in .{invalidate,release}page
  f2fs: fix to reserve space for IO align feature
  f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
  f2fs: support fault injection to f2fs_trylock_op()
  f2fs: clean up __find_inline_xattr() with __find_xattr()
  f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
  f2fs: do not bother checkpoint by f2fs_get_node_info
  f2fs: avoid down_write on nat_tree_lock during checkpoint
  f2fs: compress: fix potential deadlock of compress file
  f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
  f2fs: add gc_urgent_high_remaining sysfs node
  f2fs: fix to do sanity check in is_alive()
  f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
  f2fs: fix to do sanity check on inode type during garbage collection
  f2fs: avoid duplicate call of mark_inode_dirty
  f2fs: show number of pending discard commands
  f2fs: support POSIX_FADV_DONTNEED drop compressed page cache
  ...

Merge tag 'trace-v5.17-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "tracing/scripts: Possible uninitialized variable

  The 0day bot discovered a possible uninitialized path in the scripts
  that sort the mcount sections at build time. Just needed to initialize
  that variable"

* tag 'trace-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  script/sorttable: Fix some initialization problems

Merge tag 'riscv-for-linus-5.17-mw0' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the DA9063 as used on the HiFive Unmatched.

 - Support for relative extables, which puts us in line with other
   architectures and save some space in vmlinux.

 - A handful of kexec fixes/improvements, including the ability to run
   crash kernels from PCI-addressable memory on the HiFive Unmatched.

 - Support for the SBI SRST extension, which allows systems that do not
   have an explicit driver in Linux to reboot.

 - A handful of fixes and cleanups, including to the defconfigs and
   device trees.

* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  RISC-V: Use SBI SRST extension when available
  riscv: mm: fix wrong phys_ram_base value for RV64
  RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
  riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
  riscv: errata: alternative: mark vendor_patch_func __initdata
  riscv: head: make secondary_start_common() static
  riscv: remove cpu_stop()
  riscv: try to allocate crashkern region from 32bit addressible memory
  riscv: use hart id instead of cpu id on machine_kexec
  riscv: Don't use va_pa_offset on kdump
  riscv: dts: sifive: fu540-c000: Fix PLIC node
  riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
  riscv: dts: sifive: Group tuples in register properties
  riscv: dts: sifive: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Group tuples in interrupt properties
  riscv: dts: microchip: mpfs: Fix clock controller node
  riscv: dts: microchip: mpfs: Fix reference clock node
  riscv: dts: microchip: mpfs: Fix PLIC node
  riscv: dts: microchip: mpfs: Drop empty chosen node
  riscv: dts: canaan: Group tuples in interrupt properties
  ...

Merge tag 'kbuild-v5.17' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Add new kconfig target 'make mod2noconfig', which will be useful to
   speed up the build and test iteration.

 - Raise the minimum supported version of LLVM to 11.0.0

 - Refactor certs/Makefile

 - Change the format of include/config/auto.conf to stop double-quoting
   string type CONFIG options.

 - Fix ARCH=sh builds in dash

 - Separate compression macros for general purposes (cmd_bzip2 etc.) and
   the ones for decompressors (cmd_bzip2_with_size etc.)

 - Misc Makefile cleanups

* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: add cmd_file_size
  arch: decompressor: remove useless vmlinux.bin.all-y
  kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
  kbuild: drop $(size_append) from cmd_zstd
  sh: rename suffix-y to suffix_y
  doc: kbuild: fix default in `imply` table
  microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
  certs: move scripts/extract-cert to certs/
  kbuild: do not quote string values in include/config/auto.conf
  kbuild: do not include include/config/auto.conf from shell scripts
  certs: simplify $(srctree)/ handling and remove config_filename macro
  kbuild: stop using config_filename in scripts/Makefile.modsign
  certs: remove misleading comments about GCC PR
  certs: refactor file cleaning
  certs: remove unneeded -I$(srctree) option for system_certificates.o
  certs: unify duplicated cmd_extract_certs and improve the log
  certs: use $< and $@ to simplify the key generation rule
  kbuild: remove headers_check stub
  kbuild: move headers_check.pl to usr/include/
  certs: use if_changed to re-generate the key when the key type is changed
  ...

Merge branch 'random-5.17-rc1-for-linus' of git://git./linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - Some Kconfig changes resulted in BIG_KEYS being unselectable, which
   Justin sent a patch to fix.

 - Geert pointed out that moving to BLAKE2s bloated vmlinux on little
   machines, like m68k, so we now compensate for this.

 - Numerous style and house cleaning fixes, meant to have a cleaner base
   for future changes.

* 'random-5.17-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: simplify arithmetic function flow in account()
  random: selectively clang-format where it makes sense
  random: access input_pool_data directly rather than through pointer
  random: cleanup fractional entropy shift constants
  random: prepend remaining pool constants with POOL_
  random: de-duplicate INPUT_POOL constants
  random: remove unused OUTPUT_POOL constants
  random: rather than entropy_store abstraction, use global
  random: remove unused extract_entropy() reserved argument
  random: remove incomplete last_data logic
  random: cleanup integer types
  random: cleanup poolinfo abstraction
  random: fix typo in comments
  lib/crypto: sha1: re-roll loops to reduce code size
  lib/crypto: blake2s: move hmac construction into wireguard
  lib/crypto: add prompts back to crypto libraries

Merge tag 'hwlock-v5.17' of git://git./linux/kernel/git/remoteproc/linux

Pull hwspinlock updates from Bjorn Andersson:
 "This contains a change to the stm32 hwspinlock driver to ensure that
  the hardware is operational even without CONFIG_PM"

* tag 'hwlock-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  hwspinlock: stm32: enable clock at probe

Merge https://git./linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2022-01-19

We've added 12 non-merge commits during the last 8 day(s) which contain
a total of 12 files changed, 262 insertions(+), 64 deletions(-).

The main changes are:

1) Various verifier fixes mainly around register offset handling when
   passed to helper functions, from Daniel Borkmann.

2) Fix XDP BPF link handling to assert program type,
   from Toke Høiland-Jørgensen.

3) Fix regression in mount parameter handling for BPF fs,
   from Yafang Shao.

4) Fix incorrect integer literal when marking scratched stack slots
   in verifier, from Christy Lee.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, selftests: Add ringbuf memory type confusion test
  bpf, selftests: Add various ringbuf tests with invalid offset
  bpf: Fix ringbuf memory type confusion when passing to helpers
  bpf: Fix out of bounds access for ringbuf helpers
  bpf: Generally fix helper register offset check
  bpf: Mark PTR_TO_FUNC register initially with zero offset
  bpf: Generalize check_ctx_reg for reuse with other types
  bpf: Fix incorrect integer literal used for marking scratched stack.
  bpf/selftests: Add check for updating XDP bpf_link with wrong program type
  bpf/selftests: convert xdp_link test to ASSERT_* macros
  xdp: check prog type before updating BPF link
  bpf: Fix mount source show for bpffs
====================

Link: https://lore.kernel.org/r/20220119011825.9082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

bpf, selftests: Add ringbuf memory type confusion test

Add two tests, one which asserts that ring buffer memory can be passed to
other helpers for populating its entry area, and another one where verifier
rejects different type of memory passed to bpf_ringbuf_submit().

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf, selftests: Add various ringbuf tests with invalid offset

Assert that the verifier is rejecting invalid offsets on the ringbuf entries:

  # ./test_verifier | grep ring
  #947/u ringbuf: invalid reservation offset 1 OK
  #947/p ringbuf: invalid reservation offset 1 OK
  #948/u ringbuf: invalid reservation offset 2 OK
  #948/p ringbuf: invalid reservation offset 2 OK

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix ringbuf memory type confusion when passing to helpers

The bpf_ringbuf_submit() and bpf_ringbuf_discard() have ARG_PTR_TO_ALLOC_MEM
in their bpf_func_proto definition as their first argument, and thus both expect
the result from a prior bpf_ringbuf_reserve() call which has a return type of
RET_PTR_TO_ALLOC_MEM_OR_NULL.

While the non-NULL memory from bpf_ringbuf_reserve() can be passed to other
helpers, the two sinks (bpf_ringbuf_submit(), bpf_ringbuf_discard()) right now
only enforce a register type of PTR_TO_MEM.

This can lead to potential type confusion since it would allow other PTR_TO_MEM
memory to be passed into the two sinks which did not come from bpf_ringbuf_reserve().

Add a new MEM_ALLOC composable type attribute for PTR_TO_MEM, and enforce that:

 - bpf_ringbuf_reserve() returns NULL or PTR_TO_MEM | MEM_ALLOC
 - bpf_ringbuf_submit() and bpf_ringbuf_discard() only take PTR_TO_MEM | MEM_ALLOC
   but not plain PTR_TO_MEM arguments via ARG_PTR_TO_ALLOC_MEM
 - however, other helpers might treat PTR_TO_MEM | MEM_ALLOC as plain PTR_TO_MEM
   to populate the memory area when they use ARG_PTR_TO_{UNINIT_,}MEM in their
   func proto description

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Fix out of bounds access for ringbuf helpers

Both bpf_ringbuf_submit() and bpf_ringbuf_discard() have ARG_PTR_TO_ALLOC_MEM
in their bpf_func_proto definition as their first argument. They both expect
the result from a prior bpf_ringbuf_reserve() call which has a return type of
RET_PTR_TO_ALLOC_MEM_OR_NULL.

Meaning, after a NULL check in the code, the verifier will promote the register
type in the non-NULL branch to a PTR_TO_MEM and in the NULL branch to a known
zero scalar. Generally, pointer arithmetic on PTR_TO_MEM is allowed, so the
latter could have an offset.

The ARG_PTR_TO_ALLOC_MEM expects a PTR_TO_MEM register type. However, the non-
zero result from bpf_ringbuf_reserve() must be fed into either bpf_ringbuf_submit()
or bpf_ringbuf_discard() but with the original offset given it will then read
out the struct bpf_ringbuf_hdr mapping.

The verifier missed to enforce a zero offset, so that out of bounds access
can be triggered which could be used to escalate privileges if unprivileged
BPF was enabled (disabled by default in kernel).

Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: <tr3e.wang@gmail.com> (SecCoder Security Lab)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Generally fix helper register offset check

Right now the assertion on check_ptr_off_reg() is only enforced for register
types PTR_TO_CTX (and open coded also for PTR_TO_BTF_ID), however, this is
insufficient since many other PTR_TO_* register types such as PTR_TO_FUNC do
not handle/expect register offsets when passed to helper functions.

Given this can slip-through easily when adding new types, make this an explicit
allow-list and reject all other current and future types by default if this is
encountered.

Also, extend check_ptr_off_reg() to handle PTR_TO_BTF_ID as well instead of
duplicating it. For PTR_TO_BTF_ID, reg->off is used for BTF to match expected
BTF ids if struct offset is used. This part still needs to be allowed, but the
dynamic off from the tnum must be rejected.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Mark PTR_TO_FUNC register initially with zero offset

Similar as with other pointer types where we use ldimm64, clear the register
content to zero first, and then populate the PTR_TO_FUNC type and subprogno
number. Currently this is not done, and leads to reuse of stale register
tracking data.

Given for special ldimm64 cases we always clear the register offset, make it
common for all cases, so it won't be forgotten in future.

Fixes: 69c087ba6225 ("bpf: Add bpf_for_each_map_elem() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpf: Generalize check_ctx_reg for reuse with other types

Generalize the check_ctx_reg() helper function into a more generic named one
so that it can be reused for other register types as well to check whether
their offset is non-zero. No functional change.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

script/sorttable: Fix some initialization problems

elf_mcount_loc and mcount_sort_thread definitions are not
initialized immediately within the function, which can cause
the judgment logic to use uninitialized values when the
initialization logic of subsequent code fails.

Link: https://lkml.kernel.org/r/20211212113358.34208-2-yinan@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220118065241.42364-1-yinan@linux.alibaba.com
Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yinan Liu <yinan@linux.alibaba.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

netns: add schedule point in ops_exit_list()

When under stress, cleanup_net() can have to dismantle
netns in big numbers. ops_exit_list() currently calls
many helpers [1] that have no schedule point, and we can
end up with soft lockups, particularly on hosts
with many cpus.

Even for moderate amount of netns processed by cleanup_net()
this patch avoids latency spikes.

[1] Some of these helpers like fib_sync_up() and fib_sync_down_dev()
are very slow because net/ipv4/fib_semantics.c uses host-wide hash tables,
and ifindex is used as the only input of two hash functions.
    ifindexes tend to be the same for all netns (lo.ifindex==1 per instance)
    This will be fixed in a separate patch.

Fixes: 72ad937abd0a ("net: Add support for batching network namespace cleanups")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

random: simplify arithmetic function flow in account()

Now that have_bytes is never modified, we can simplify this function.
First, we move the check for negative entropy_count to be first. That
ensures that subsequent reads of this will be non-negative. Then,
have_bytes and ibytes can be folded into their one use site in the
min_t() function.

Suggested-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: selectively clang-format where it makes sense

This is an old driver that has seen a lot of different eras of kernel
coding style. In an effort to make it easier to code for, unify the
coding style around the current norm, by accepting some of -- but
certainly not all of -- the suggestions from clang-format. This should
remove ambiguity in coding style, especially with regards to spacing,
when code is being changed or amended. Consequently it also makes code
review easier on the eyes, following one uniform style rather than
several.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: access input_pool_data directly rather than through pointer

This gets rid of another abstraction we no longer need. It would be nice
if we could instead make pool an array rather than a pointer, but the
latent entropy plugin won't be able to do its magic in that case. So
instead we put all accesses to the input pool's actual data through the
input_pool_data array directly.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: cleanup fractional entropy shift constants

The entropy estimator is calculated in terms of 1/8 bits, which means
there are various constants where things are shifted by 3. Move these
into our pool info enum with the other relevant constants. While we're
at it, move an English assertion about sizes into a proper BUILD_BUG_ON
so that the compiler can ensure this invariant.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

random: prepend remaining pool constants with POOL_

The other pool constants are prepended with POOL_, but not these last
ones. Rename them. This will then let us move them into the enum in the
following commit.

Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>