review.tizen.org Git - platform/kernel/linux-rpi.git/log

Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' into clk-next

- Kunit tests for clk-gate implementation
- Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
   support for dynamic mode

* clk-xilinx:
  clk: zynqmp: replace warn_once with pr_debug for failed clock ops

* clk-kunit:
  clk: gate: Add some kunit test suites

* clk-cs2000:
  clk: cs2000-cp: convert driver to regmap
  clk: cs2000-cp: freeze config during register fiddling
  clk: cs2000-cp: make clock skip setting configurable
  clk: cs2000-cp: add support for dynamic mode
  clk: cs2000-cp: Make aux output function controllable
  dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode
  dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag
  dt-bindings: clock: cs2000-cp: document aux-output-source
  dt-bindings: clock: convert cs2000-cp bindings to yaml

* clk-renesas:
  dt-bindings: clock: renesas: Make example 'clocks' parsable
  clk: rs9: Add Renesas 9-series PCIe clock generator driver
  clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
  dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
  clk: renesas: r8a779f0: Add PFC clock
  clk: renesas: r8a779f0: Add I2C clocks
  clk: renesas: r8a779f0: Add WDT clock
  clk: renesas: r8a779f0: Fix RSW2 clock divider
  clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
  dt-bindings: clock: renesas: Document RZ/V2L SoC
  dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
  clk: renesas: r8a779a0: Add CANFD module clock
  clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
  clk: renesas: r8a7799[05]: Add MLP clocks
  clk: renesas: r8a779f0: Add SYS-DMAC clocks

Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' into clk-next

- Clock configuration on Microchip PolarFire SoCs
- Free allocations on probe error in Mediatek clk driver
- Modernize Mediatek clk driver by consolidating code

* clk-microchip:
  clk: microchip: Add driver for Microchip PolarFire SoC
  dt-bindings: clk: microchip: Add Microchip PolarFire host binding

* clk-si:
  clk-si5341: replace snprintf in show functions with sysfs_emit
  clk: si5341: fix reported clk_rate when output divider is 2

* clk-mtk: (32 commits)
  clk: mediatek: Warn if clk IDs are duplicated
  clk: mediatek: mt8195: Implement remove functions
  clk: mediatek: mt8195: Implement error handling in probe functions
  clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()
  clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path
  clk: mediatek: mtk: Implement error handling in register APIs
  clk: mediatek: pll: Implement error handling in register API
  clk: mediatek: mux: Implement error handling in register API
  clk: mediatek: mux: Reverse check for existing clk to reduce nesting level
  clk: mediatek: gate: Implement error handling in register API
  clk: mediatek: cpumux: Implement error handling in register API
  clk: mediatek: mtk: Clean up included headers
  clk: mediatek: Add mtk_clk_simple_remove()
  clk: mediatek: Implement mtk_clk_unregister_composites() API
  clk: mediatek: Implement mtk_clk_unregister_divider_clks() API
  clk: mediatek: Implement mtk_clk_unregister_factors() API
  clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API
  clk: mediatek: pll: Clean up included headers
  clk: mediatek: pll: Implement unregister API
  clk: mediatek: pll: Split definitions into separate header file
  ...

* clk-at91:
  clk: at91: clk-master: remove dead code
  clk: at91: sama7g5: fix parents of PDMCs' GCLK
  clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT
  clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT

* clk-st:
  clk: stm32mp1: Add parent_data to ETHRX clock
  clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock

dt-bindings: clock: renesas: Make example 'clocks' parsable

'clocks' in the example is not parsable with the 0 phandle value
because the number of #clock-cells is unknown in the previous entry.
Solve this by adding the clock provider node. Only 'cpg_clocks' is
needed as the examples are built with fixups which can be used to
identify phandles.

This is in preparation to support schema validation on .dtb files.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220301190400.1644150-1-robh@kernel.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: rs9: Add Renesas 9-series PCIe clock generator driver

Add driver for Renesas 9-series PCIe clock generators. This driver
is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C
PCIe clock generators, currently the only tested and supported chip
is 9FGV0241.

The driver is capable of configuring per-chip spread spectrum mode
and output amplitude, as well as per-output slew rate.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de
[sboyd@kernel.org: Use non-underscore API for fixed factor]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()

Add an API for a fixed factor clk that uses an index for the parent
instead of a string name. This allows us to move drivers away from the
string based method of describing parents and use the DT/firmware based
method instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-2-marex@denx.de
[sboyd@kernel.org: Expose a new API instead of internal function]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator

Add binding for Renesas 9-series PCIe clock generators. This binding
is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C
PCIe clock generators, currently the only tested and supported chip
is 9FGV0241.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-1-marex@denx.de
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: microchip: Add driver for Microchip PolarFire SoC

Add support for clock configuration on Microchip PolarFire SoC

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Co-developed-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220222121143.3316880-2-conor.dooley@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'renesas-clk-for-v5.18-tag2' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

- Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on
   R-Car S4-8
- A small fix

* tag 'renesas-clk-for-v5.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a779f0: Add PFC clock
  clk: renesas: r8a779f0: Add I2C clocks
  clk: renesas: r8a779f0: Add WDT clock
  clk: renesas: r8a779f0: Fix RSW2 clock divider

Merge tag 'clk-at91-5.18' of git://git./linux/kernel/git/at91/linux into clk-at91

Pull AT91 clk driver changes From Nicolas Ferre:

- sama7g5: One low priority fix for GCLK of PDMC
- clk-master: cleanup of dead code

* tag 'clk-at91-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: at91: clk-master: remove dead code
clk: at91: sama7g5: fix parents of PDMCs' GCLK

clk: at91: clk-master: remove dead code

Commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") removed the master clock's prescaler from clock tree of SAMA7G5
as it has been discovered that there is a hardware bug when trying to
change it at run-time (bug is described in description of
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock")). This was previously changed at CPUFreq driver request. Thus, with
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") there is no need of code that handles run-time changes of master
clock's prescaler, thus remove this code.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220203110202.18329-1-claudiu.beznea@microchip.com

clk: at91: sama7g5: fix parents of PDMCs' GCLK

Audio PLL can be used as parent by the GCLKs of PDMCs.

Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220304182616.1920392-1-codrin.ciubotariu@microchip.com

clk: renesas: r8a779f0: Add PFC clock

Add the module clock used by the Pin Function (PFC/GPIO) controller
on the Renesas R-Car S4-8 (R8A779F0) SoC.

Extracted from a larger patch in the BSP by LUU HOAI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/4ef3d3dfe714ad75112e4886efea0b66e40a33bc.1645457502.git.geert+renesas@glider.be

clk: renesas: r8a779f0: Add I2C clocks

Add the module clocks used by the I2C Bus Interfaces on the Renesas
R-Car S4-8 (R8A779F0) SoC.

Extracted from a larger patch in the BSP by LUU HOAI.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/e4dcee5f6f521dccd7ac7f2fb6c86cfe4a24d032.1643898820.git.geert+renesas@glider.be

clk: renesas: r8a779f0: Add WDT clock

Add the module clock used by the RCLK Watchdog Timer (RWDT) on the
Renesas R-Car S4-8 (r8a779f0) SoC. Mark it as a critical clock, to
ensure uninterrupted watchdog operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/8d9b280065a663f2cf31db7b21a010aa781a0af1.1642525158.git.geert+renesas@glider.be

clk: renesas: r8a779f0: Fix RSW2 clock divider

According to Section 8.1.2 Figure 8.1.1 ("Block Diagram of CPG"), Note
22 ("RSW2 divider"), and Table 8.1.4d ("Lists of CPG clocks generated
from CPGMA1"), the RSwitch2 and PCI Express clock is generated from PLL5
by dividing by two, followed by the RSW2 divider. As PLL5 runs at 3200
MHz, and RSW2 is fixed to 320 MHz, the RSW2 divider must be 5.

Correct the parent and the fixed divider.

Fixes: 24aaff6a6ce4c4de ("clk: renesas: cpg-mssr: Add support for R-Car S4-8")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/d6a406f31e6f02f892e0253f4e8a9a2f68fd652e.1641566003.git.geert+renesas@glider.be

clk: mediatek: Warn if clk IDs are duplicated

The Mediatek clk driver library handles duplicate clock IDs in two
different ways: either ignoring the duplicate entry, or overwriting
the old clk. Either way may cause unexpected behavior, and the latter
also causes an orphan clk that cannot be cleaned up.

Align the behavior so that later duplicate entries are ignored, and
a warning printed. The warning will also aid in making the issue
noticeable.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-32-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8195: Implement remove functions

Until now the mediatek clk driver library did not have any way to
unregister clks, and so none of the drivers implemented remove
functions.

Now that the library does have APIs to unregister clks, use them
to implement remove functions for the mt8195 clk drivers.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220208124034.414635-31-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8195: Implement error handling in probe functions

Until now the mediatek clk driver library did not have any way to
unregister clks, and so all drivers did not do proper cleanup in
their error paths.

Now that the library does have APIs to unregister clks, use them
in the error path of the probe functions for the mt8195 clk drivers
to do proper cleanup.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20220208124034.414635-30-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mt8195: Hook up mtk_clk_simple_remove()

Various small clock controllers only have clock gates, and utilize
mtk_clk_simple_probe() as their driver probe function.

Now that we have a matching remove function, hook it up for the relevant
drivers. This was done with the following command:

sed -i -e '/mtk_clk_simple_probe/a \
.remove = mtk_clk_simple_remove,' drivers/clk/mediatek/clk-mt8195-*.c

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220208124034.414635-29-wenst@chromium.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path

Until now the mediatek clk driver library did not have any way to
unregister clks, and so all drivers did not do proper cleanup in
their error paths.

Now that the library does have APIs to unregister clks, use them
in the error path of mtk_clk_simple_probe() to do proper cleanup.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-28-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mtk: Implement error handling in register APIs

The remaining clk registration functions do not stop or return errors
if any clk failed to be registered, nor do they implement error
handling paths. This may result in a partially working device if any
step fails.

Make the register functions return proper error codes, and bail out if
errors occur. Proper cleanup, i.e. unregister any clks that were
successfully registered, is done in the new error path.

This also makes the |struct clk_data *| argument mandatory, as it is
used to track the list of clks registered.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-27-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: pll: Implement error handling in register API

The pll clk type registration function does not stop or return errors
if any clk failed to be registered, nor does it implement an error
handling path. This may result in a partially working device if any
step failed.

Make the register function return proper error codes, and bail out if
errors occur. Proper cleanup, i.e. unregister any clks that were
successfully registered, and unmap the I/O space, is done in the new
error path.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-26-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mux: Implement error handling in register API

The mux clk type registration function does not stop or return errors
if any clk failed to be registered, nor does it implement an error
handling path. This may result in a partially working device if any
step failed.

Make the register function return proper error codes, and bail out if
errors occur. Proper cleanup, i.e. unregister any clks that were
successfully registered, is done in the new error path.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-25-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mux: Reverse check for existing clk to reduce nesting level

The clk registration code here currently does:

    if (IS_ERR_OR_NULL(clk_data->clks[mux->id])) {
            ... do clk registration ...
    }

This extra level of nesting wastes screen real estate.

Reduce the nesting level by reversing the conditional shown above.
Other than that, functionality is not changed.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-24-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: gate: Implement error handling in register API

The gate clk type registration function does not stop or return errors
if any clk failed to be registered, nor does it implement an error
handling path. This may result in a partially working device if any
step failed.

Make the register function return proper error codes, and bail out if
errors occur. Proper cleanup, i.e. unregister any clks that were
successfully registered, is done in the new error path.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-23-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: cpumux: Implement error handling in register API

The cpumux clk type registration function does not stop or return errors
if any clk failed to be registered, nor does it implement an error
handling path. This may result in a partially working device if any
step failed.

Make the register function return proper error codes, and bail out if
errors occur. Proper cleanup, i.e. unregister any clks that were
successfully registered, is done in the new error path.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-22-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mtk: Clean up included headers

Some included headers aren't actually used anywhere, while other headers
with the declaration of functions and structures aren't directly
included.

Get rid of the unused ones, and add the ones that should be included
directly.

On the header side, replace headers that are included purely for data
structure definitions with forward declarations. This decreases the
amount of preprocessing and compilation effort required for each
inclusion.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-21-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Add mtk_clk_simple_remove()

In commit c58cd0e40ffa ("clk: mediatek: Add mtk_clk_simple_probe() to
simplify clock providers"), a generic probe function was added to
simplify clk drivers that only needed to support clk gates. However due
to the lack of unregister APIs, a corresponding remove function was not
added.

Now that the unregister APIs have been implemented, add aforementioned
remove function to make it complete.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-20-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Implement mtk_clk_unregister_composites() API

mtk_clk_register_composites(), as the name suggests, is used to register
a given list of composite clks. However it is lacking a counterpart
unregister API.

Implement said unregister API so that the various clock platform drivers
can utilize it to do proper unregistration, cleanup and removal.

In the header file, the register function's declaration is also
reformatted to fit code style guidelines.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220208124034.414635-19-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Implement mtk_clk_unregister_divider_clks() API

mtk_clk_register_divider_clks(), as the name suggests, is used to register
a given list of divider clks. However it is lacking a counterpart
unregister API.

Implement said unregister API so that the various clock platform drivers
can utilize it to do proper unregistration, cleanup and removal.

In the header file, the register function's declaration is also
reformatted to fit code style guidelines.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-18-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Implement mtk_clk_unregister_factors() API

mtk_clk_register_factors(), as the name suggests, is used to register
a given list of fixed factor clks. However it is lacking a counterpart
unregister API.

Implement said unregister API so that the various clock platform drivers
can utilize it to do proper unregistration, cleanup and removal.

In the header file, the register function's declaration is also
reformatted to fit code style guidelines.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-17-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API

mtk_clk_register_fixed_clks(), as the name suggests, is used to register
a given list of fixed rate clks. However it is lacking a counterpart
unregister API.

Implement said unregister API so that the various clock platform drivers
can utilize it to do proper unregistration, cleanup and removal.

In the header file, the register function's declaration is also
reformatted to fit code style guidelines.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-16-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: pll: Clean up included headers

Some included headers aren't actually used anywhere, while other headers
with the declaration of functions and structures aren't directly
included.

Get rid of the unused ones, and add the ones that should be included
directly.

Also, copy the MHZ macro from clk-mtk.h, and drop clk-mtk.h from the
included headers.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-15-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: pll: Implement unregister API

The PLL clk type within the MediaTek clk driver library only has a
register function, and no corresponding unregister function. This
means there is no way for its users to properly implement cleanup
and removal.

Add a matching unregister function for the PLL type clk.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-14-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: pll: Split definitions into separate header file

When the PLL type clk was implemented in the MediaTek clk driver
library, the data structure definitions and function declaration
were put in the common header file.

Since it is its own type of clk, and not all platform clk drivers
utilize it, having the definitions in the common header results
in wasted cycles during compilation.

Split out the related definitions and declarations into its own
header file, and include that only in the platform clk drivers that
need it.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-13-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mux: Clean up included headers

Some included headers aren't actually used anywhere, while other headers
with the declaration of functions and structures aren't directly
included.

Get rid of the unused ones, and add the ones that should be included
directly.

On the header side, replace headers that are included purely for data
structure definitions with forward declarations. This decreases the
amount of preprocessing and compilation effort required for each
inclusion.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-12-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mux: Internalize struct mtk_clk_mux

struct mtk_clk_mux is an implementation detail of the mux clk type,
and is not used outside of the implementation.

Internalize the definition to minimize leakage of details and shrink
the header file.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-11-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: mux: Implement unregister API

The mux clk type within the MediaTek clk driver library only has a
register function, and no corresponding unregister function. This
means there is no way for its users to properly implement cleanup
and removal.

Add a matching unregister function for the mux type clk.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-10-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: cpumux: Clean up included headers

Some headers with the declaration of functions and structures aren't
directly included. Explicitly include them so that future changes to
other headers would not result in an unexpected build break.

On the header side, add forward declarations for any data structures
whose pointers are used in function signatures. No headers are
required.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-9-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: cpumux: Internalize struct mtk_clk_cpumux

struct mtk_clk_cpumux is an implementation detail of the cpumux clk
type, and is not used outside of the implementation.

Internalize the definition to minimize leakage of details and shrink
the header file.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-8-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: cpumux: Implement unregister API

The cpumux clk type within the MediaTek clk driver library only has
a register function, and no corresponding unregister function. This
means there is no way for its users to properly implement cleanup
and removal.

Add a matching unregister function for the cpumux type clk.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-7-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: gate: Clean up included headers

Some included headers aren't actually used anywhere, while other headers
with the declaration of functions and structures aren't directly
included.

Get rid of the unused ones, and add the ones that should be included
directly.

On the header side, replace headers that are included purely for data
structure definitions with forward declarations. This decreases the
amount of preprocessing and compilation effort required for each
inclusion.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-6-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: gate: Implement unregister API

The gate clk type within the MediaTek clk driver library only has a
register function, and no corresponding unregister function. This
means there is no way for its users to properly implement cleanup
and removal.

Add a matching unregister function for the gate type clk.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-5-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: gate: Internalize clk implementation

struct mtk_clk_gate and mtk_clk_register_gate() are not used outside of
the gate clk library. Only the API that handles a list of clks is used
by the individual platform clk drivers.

Internalize the parts that aren't used outside of the implementation.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-4-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: gate: Consolidate gate type clk related code

Right now some bits of the gate type clk code are in clk-gate.[ch], but
other bits are in clk-mtk.[ch]. This is different from the cpumux and
mux type clks, for which all of the code are found in the same files.

Move the functions that register multiple clks from a given list,
mtk_clk_register_gates_with_dev() and mtk_clk_register_gates(), to
clk-gate.[ch] to consolidate all the code for the gate type clks.

This commit only moves code with minor whitespace fixups to correct
the code style. Further improvements, such as internalizing various
functions and structures will be done in later commits.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-3-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

clk: mediatek: Use %pe to print errors

If %pe is used to print errors, a string representation of the error
would be printed instead of a number as with %ld. Also, all the sites
printing errors are deriving the error code from a pointer. Using %pe
is more straightforward.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220208124034.414635-2-wenst@chromium.org
Reviewed-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Merge tag 'renesas-clk-for-v5.18-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

- Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
- Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
- Add CAN-FD clocks on Renesas R-Car V3U
- Add support for the new Renesas RZ/V2L SoC
- Miscellaneous fixes and improvements

* tag 'renesas-clk-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC
  dt-bindings: clock: renesas: Document RZ/V2L SoC
  dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
  clk: renesas: r8a779a0: Add CANFD module clock
  clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3
  clk: renesas: r8a7799[05]: Add MLP clocks
  clk: renesas: r8a779f0: Add SYS-DMAC clocks

Linux 5.17-rc4

Merge tag 'kbuild-fixes-v5.17-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

- Fix the truncated path issue for HAVE_GCC_PLUGINS test in Kconfig

- Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings
   for the latest Clang

- Fix missing fclose() in Kconfig

- Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
   overridden.

* tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix failing to generate auto.conf
  kconfig: fix missing fclose() on error paths
  Makefile.extrawarn: Move -Wunaligned-access to W=1
  kconfig: let 'shell' return enough output for deep path names

Merge tag 'irq-urgent-2022-02-13' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
"Interrupt chip driver fixes:

   - Don't install an hotplug notifier for GICV3-ITS on systems which do
     not need it to prevent a warning in the notifier about inconsistent
     state

   - Add the missing device tree matching for the T-HEAD PLIC variant so
     the related SoC is properly supported"

* tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Add missing thead,c900-plic match string
  dt-bindings: update riscv plic compatible string
  irqchip/gic-v3-its: Skip HP notifier when no ITS is registered

Merge tag 'objtool_urgent_for_v5.17_rc4' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"

* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm

Merge tag 'sched_urgent_for_v5.17_rc4' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Borislav Petkov:
"Fix a NULL-ptr dereference when recalculating a sched entity's weight"

* tag 'sched_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix fault in reweight_entity

Merge tag 'perf_urgent_for_v5.17_rc4' of git://git./linux/kernel/git/tip/tip

Pull perf fix from Borislav Petkov:
"Prevent cgroup event list corruption when switching events"

* tag 'perf_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix list corruption in perf_cgroup_switch()

Merge tag 'x86_urgent_for_v5.17_rc4' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Borislav Petkov:
"Prevent softlockups when tearing down large SGX enclaves"

* tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Silence softlockup detection when releasing large enclaves

Merge tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three small smb3 reconnect fixes and an error log clarification"

* tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: mark sessions for reconnection in helper function
  cifs: call helper functions for marking channels for reconnect
  cifs: call cifs_reconnect when a connection is marked
  [smb3] improve error message when mount options conflict with posix

Merge tag 'irqchip-fixes-5.17-2' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Don't register a hotplug notifier on GICv3 systems that advertise
LPI support, but have no ITS to make use of it

- Add missing DT matching for the thead,c900-plic variant of the
SiFive PLIC

Link: https://lore.kernel.org/r/20220211110038.1179155-1-maz@kernel.org

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two minor fixes in the lpfc driver. One changing the classification of
  trace messages and the other fixing a build issue when NVME_FC is
  disabled"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Reduce log messages seen after firmware download
  scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

Merge tag 'char-misc-5.17-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are a small number of char/misc driver fixes for 5.17-rc4 for
  reported issues. They contain:

   - phy driver fixes

   - iio driver fix

   - eeprom driver fix

   - speakup regression fix

   - fastrpc fix

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
  speakup-dectlk: Restore pitch setting
  bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
  bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
  eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
  misc: fastrpc: avoid double fput() on failed usercopy
  phy: dphy: Correct clk_pre parameter
  phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
  phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
  phy: xilinx: zynqmp: Fix bus width setting for SGMII
  phy: cadence: Sierra: fix error handling bugs in probe()
  phy: ti: Fix missing sentinel for clk_div_table
  phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
  phy: usb: Leave some clocks running during suspend

Merge tag 'staging-5.17-rc4' of git://git./linux/kernel/git/gregkh/staging

Pullstaging driver fixes from Greg KH:
"Here are two staging driver fixes for 5.17-rc4.  These are:

   - fbtft error path fix

   - vc04_services rcu dereference fix

  Both of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fbtft: Fix error path in fbtft_driver_module_init()
  staging: vc04_services: Fix RCU dereference check

Merge tag 'tty-5.17-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are four small tty/serial fixes for 5.17-rc4.  They are:

   - 8250_pericom change revert to fix a reported regression

   - two speculation fixes for vt_ioctl

   - n_tty regression fix for polling

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt_ioctl: add array_index_nospec to VT_ACTIVATE
  vt_ioctl: fix array_index_nospec in vt_setactivate
  serial: 8250_pericom: Revert "Re-enable higher baud rates"
  n_tty: wake up poll(POLLRDNORM) on receiving data

Merge tag 'usb-5.17-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.17-rc4 that resolve some
  reported issues and add new device ids:

   - usb-serial new device ids

   - ulpi cleanup fixes

   - f_fs use-after-free fix

   - dwc3 driver fixes

   - ax88179_178a usb network driver fix

   - usb gadget fixes

  There is a revert at the end of this series to resolve a build problem
  that 0-day found yesterday. Most of these have been in linux-next,
  except for the last few, and all have now passed 0-day tests"

* tag 'usb-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
  usb: dwc2: drd: fix soft connect when gadget is unconfigured
  usb: gadget: rndis: check size of RNDIS_MSG_SET command
  USB: gadget: validate interface OS descriptor requests
  usb: core: Unregister device on component_add() failure
  net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup
  usb: dwc3: gadget: Prevent core from processing stale TRBs
  USB: serial: cp210x: add CPI Bulk Coin Recycler id
  USB: serial: cp210x: add NCR Retail IO box id
  USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
  usb: gadget: f_uac2: Define specific wTerminalType
  usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition
  usb: raw-gadget: fix handling of dual-direction-capable endpoints
  usb: usb251xb: add boost-up property support
  usb: ulpi: Call of_node_put correctly
  usb: ulpi: Move of_node_put to ulpi_dev_release
  USB: serial: option: add ZTE MF286D modem
  USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
  usb: f_fs: Fix use-after-free for epfile
  usb: dwc3: xilinx: fix uninitialized return value

Merge tag 's390-5.17-4' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:
"Maintainers and reviewers changes:

    - Add Alexander Gordeev as maintainer for s390.

    - Christian Borntraeger will focus on s390 KVM maintainership and
      stays as s390 reviewer.

  Fixes:

   - Fix clang build of modules loader KUnit test.

   - Fix kernel panic in CIO code on FCES path-event when no driver is
     attached to a device or the driver does not provide the path_event
     function"

* tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: verify the driver availability for path_event call
  s390/module: fix building test_modules_helpers.o with clang
  MAINTAINERS: downgrade myself to Reviewer for s390
  MAINTAINERS: add Alexander Gordeev as maintainer for s390

Merge tag 'for-linus-5.17a-rc4-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

- Two small cleanups

- Another fix for addressing the EFI framebuffer above 4GB when running
   as Xen dom0

- A patch to let Xen guests use reserved bits in MSI- and IO-APIC-
   registers for extended APIC-IDs the same way KVM guests are doing it
   already

* tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pci: Make use of the helper macro LIST_HEAD()
  xen/x2apic: Fix inconsistent indenting
  xen/x86: detect support for extended destination ID
  xen/x86: obtain full video frame buffer address for Dom0 also under EFI

Merge tag 'seccomp-v5.17-rc4' of git://git./linux/kernel/git/kees/linux

Pull seccomp fixes from Kees Cook:
"This fixes a corner case of fatal SIGSYS being ignored since v5.15.
  Along with the signal fix is a change to seccomp so that seeing
  another syscall after a fatal filter result will cause seccomp to kill
  the process harder.

  Summary:

   - Force HANDLER_EXIT even for SIGNAL_UNKILLABLE

   - Make seccomp self-destruct after fatal filter results

   - Update seccomp samples for easier behavioral demonstration"

* tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  samples/seccomp: Adjust sample to also provide kill option
  seccomp: Invalidate seccomp mode to catch death failures
  signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"5 patches.

  Subsystems affected by this patch series: binfmt, procfs, and mm
  (vmscan, memcg, and kfence)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kfence: make test case compatible with run time set sample interval
  mm: memcg: synchronize objcg lists with a dedicated spinlock
  mm: vmscan: remove deadlock due to throttling failing to make progress
  fs/proc: task_mmu.c: don't read mapcount for migration entry
  fs/binfmt_elf: fix PT_LOAD p_align values for loaders

kconfig: fix failing to generate auto.conf

When the KCONFIG_AUTOCONFIG is specified (e.g. export \
KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of
include/config/ will not be created, so kconfig can't create deps
files in it and auto.conf can't be generated.

Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"

This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87.

It causes build errors as reported by the kernel test robot.

Link: https://lore.kernel.org/r/202202112236.AwoOTtHO-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured")
Cc: stable@kernel.org
Cc: Amelie Delaunay <amelie.delaunay@foss.st.com>
Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kfence: make test case compatible with run time set sample interval

The parameter kfence_sample_interval can be set via boot parameter and
late shell command, which is convenient for automated tests and KFENCE
parameter optimization. However, KFENCE test case just uses
compile-time CONFIG_KFENCE_SAMPLE_INTERVAL, which will make KFENCE test
case not run as users desired. Export kfence_sample_interval, so that
KFENCE test case can use run-time-set sample interval.

Link: https://lkml.kernel.org/r/20220207034432.185532-1-liupeng256@huawei.com
Signed-off-by: Peng Liu <liupeng256@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian Knig <christian.koenig@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg: synchronize objcg lists with a dedicated spinlock

Alexander reported a circular lock dependency revealed by the mmap1 ltp
test:

  LOCKDEP_CIRCULAR (suite: ltp, case: mtest06 (mmap1))
          WARNING: possible circular locking dependency detected
          5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1 Not tainted
          ------------------------------------------------------
          mmap1/202299 is trying to acquire lock:
          00000001892c0188 (css_set_lock){..-.}-{2:2}, at: obj_cgroup_release+0x4a/0xe0
          but task is already holding lock:
          00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
          which lock already depends on the new lock.
          the existing dependency chain (in reverse order) is:
          -> #1 (&sighand->siglock){-.-.}-{2:2}:
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 __lock_task_sighand+0x90/0x190
                 cgroup_freeze_task+0x2e/0x90
                 cgroup_migrate_execute+0x11c/0x608
                 cgroup_update_dfl_csses+0x246/0x270
                 cgroup_subtree_control_write+0x238/0x518
                 kernfs_fop_write_iter+0x13e/0x1e0
                 new_sync_write+0x100/0x190
                 vfs_write+0x22c/0x2d8
                 ksys_write+0x6c/0xf8
                 __do_syscall+0x1da/0x208
                 system_call+0x82/0xb0
          -> #0 (css_set_lock){..-.}-{2:2}:
                 check_prev_add+0xe0/0xed8
                 validate_chain+0x736/0xb20
                 __lock_acquire+0x604/0xbd8
                 lock_acquire.part.0+0xe2/0x238
                 lock_acquire+0xb0/0x200
                 _raw_spin_lock_irqsave+0x6a/0xd8
                 obj_cgroup_release+0x4a/0xe0
                 percpu_ref_put_many.constprop.0+0x150/0x168
                 drain_obj_stock+0x94/0xe8
                 refill_obj_stock+0x94/0x278
                 obj_cgroup_charge+0x164/0x1d8
                 kmem_cache_alloc+0xac/0x528
                 __sigqueue_alloc+0x150/0x308
                 __send_signal+0x260/0x550
                 send_signal+0x7e/0x348
                 force_sig_info_to_task+0x104/0x180
                 force_sig_fault+0x48/0x58
                 __do_pgm_check+0x120/0x1f0
                 pgm_check_handler+0x11e/0x180
          other info that might help us debug this:
           Possible unsafe locking scenario:
                 CPU0                    CPU1
                 ----                    ----
            lock(&sighand->siglock);
                                         lock(css_set_lock);
                                         lock(&sighand->siglock);
            lock(css_set_lock);
           *** DEADLOCK ***
          2 locks held by mmap1/202299:
           #0: 00000000ca3b3818 (&sighand->siglock){-.-.}-{2:2}, at: force_sig_info_to_task+0x38/0x180
           #1: 00000001892ad560 (rcu_read_lock){....}-{1:2}, at: percpu_ref_put_many.constprop.0+0x0/0x168
          stack backtrace:
          CPU: 15 PID: 202299 Comm: mmap1 Not tainted 5.17.0-20220113.rc0.git0.f2211f194038.300.fc35.s390x+debug #1
          Hardware name: IBM 3906 M04 704 (LPAR)
          Call Trace:
            dump_stack_lvl+0x76/0x98
            check_noncircular+0x136/0x158
            check_prev_add+0xe0/0xed8
            validate_chain+0x736/0xb20
            __lock_acquire+0x604/0xbd8
            lock_acquire.part.0+0xe2/0x238
            lock_acquire+0xb0/0x200
            _raw_spin_lock_irqsave+0x6a/0xd8
            obj_cgroup_release+0x4a/0xe0
            percpu_ref_put_many.constprop.0+0x150/0x168
            drain_obj_stock+0x94/0xe8
            refill_obj_stock+0x94/0x278
            obj_cgroup_charge+0x164/0x1d8
            kmem_cache_alloc+0xac/0x528
            __sigqueue_alloc+0x150/0x308
            __send_signal+0x260/0x550
            send_signal+0x7e/0x348
            force_sig_info_to_task+0x104/0x180
            force_sig_fault+0x48/0x58
            __do_pgm_check+0x120/0x1f0
            pgm_check_handler+0x11e/0x180
          INFO: lockdep is turned off.

In this example a slab allocation from __send_signal() caused a
refilling and draining of a percpu objcg stock, resulted in a releasing
of another non-related objcg.  Objcg release path requires taking the
css_set_lock, which is used to synchronize objcg lists.

This can create a circular dependency with the sighandler lock, which is
taken with the locked css_set_lock by the freezer code (to freeze a
task).

In general it seems that using css_set_lock to synchronize objcg lists
makes any slab allocations and deallocation with the locked css_set_lock
and any intervened locks risky.

To fix the problem and make the code more robust let's stop using
css_set_lock to synchronize objcg lists and use a new dedicated spinlock
instead.

Link: https://lkml.kernel.org/r/Yfm1IHmoGdyUR81T@carbon.dhcp.thefacebook.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: vmscan: remove deadlock due to throttling failing to make progress

A soft lockup bug in kcompactd was reported in a private bugzilla with
the following visible in dmesg;

  watchdog: BUG: soft lockup - CPU#33 stuck for 26s! [kcompactd0:479]
  watchdog: BUG: soft lockup - CPU#33 stuck for 52s! [kcompactd0:479]
  watchdog: BUG: soft lockup - CPU#33 stuck for 78s! [kcompactd0:479]
  watchdog: BUG: soft lockup - CPU#33 stuck for 104s! [kcompactd0:479]

The machine had 256G of RAM with no swap and an earlier failed
allocation indicated that node 0 where kcompactd was run was potentially
unreclaimable;

  Node 0 active_anon:29355112kB inactive_anon:2913528kB active_file:0kB
    inactive_file:0kB unevictable:64kB isolated(anon):0kB isolated(file):0kB
    mapped:8kB dirty:0kB writeback:0kB shmem:26780kB shmem_thp:
    0kB shmem_pmdmapped: 0kB anon_thp: 23480320kB writeback_tmp:0kB
    kernel_stack:2272kB pagetables:24500kB all_unreclaimable? yes

Vlastimil Babka investigated a crash dump and found that a task
migrating pages was trying to drain PCP lists;

  PID: 52922  TASK: ffff969f820e5000  CPU: 19  COMMAND: "kworker/u128:3"
  Call Trace:
     __schedule
     schedule
     schedule_timeout
     wait_for_completion
     __flush_work
     __drain_all_pages
     __alloc_pages_slowpath.constprop.114
     __alloc_pages
     alloc_migration_target
     migrate_pages
     migrate_to_node
     do_migrate_pages
     cpuset_migrate_mm_workfn
     process_one_work
     worker_thread
     kthread
     ret_from_fork

This failure is specific to CONFIG_PREEMPT=n builds.  The root of the
problem is that kcompact0 is not rescheduling on a CPU while a task that
has isolated a large number of the pages from the LRU is waiting on
kcompact0 to reschedule so the pages can be released.  While
shrink_inactive_list() only loops once around too_many_isolated, reclaim
can continue without rescheduling if sc->skipped_deactivate == 1 which
could happen if there was no file LRU and the inactive anon list was not
low.

Link: https://lkml.kernel.org/r/20220203100326.GD3301@suse.de
Fixes: d818fca1cac3 ("mm/vmscan: throttle reclaim and compaction when too may pages are isolated")
Signed-off-by: Mel Gorman <mgorman@suse.de>
Debugged-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/proc: task_mmu.c: don't read mapcount for migration entry

The syzbot reported the below BUG:

  kernel BUG at include/linux/page-flags.h:785!
  invalid opcode: 0000 [#1] PREEMPT SMP KASAN
  CPU: 1 PID: 4392 Comm: syz-executor560 Not tainted 5.16.0-rc6-syzkaller #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
  RIP: 0010:PageDoubleMap include/linux/page-flags.h:785 [inline]
  RIP: 0010:__page_mapcount+0x2d2/0x350 mm/util.c:744
  Call Trace:
    page_mapcount include/linux/mm.h:837 [inline]
    smaps_account+0x470/0xb10 fs/proc/task_mmu.c:466
    smaps_pte_entry fs/proc/task_mmu.c:538 [inline]
    smaps_pte_range+0x611/0x1250 fs/proc/task_mmu.c:601
    walk_pmd_range mm/pagewalk.c:128 [inline]
    walk_pud_range mm/pagewalk.c:205 [inline]
    walk_p4d_range mm/pagewalk.c:240 [inline]
    walk_pgd_range mm/pagewalk.c:277 [inline]
    __walk_page_range+0xe23/0x1ea0 mm/pagewalk.c:379
    walk_page_vma+0x277/0x350 mm/pagewalk.c:530
    smap_gather_stats.part.0+0x148/0x260 fs/proc/task_mmu.c:768
    smap_gather_stats fs/proc/task_mmu.c:741 [inline]
    show_smap+0xc6/0x440 fs/proc/task_mmu.c:822
    seq_read_iter+0xbb0/0x1240 fs/seq_file.c:272
    seq_read+0x3e0/0x5b0 fs/seq_file.c:162
    vfs_read+0x1b5/0x600 fs/read_write.c:479
    ksys_read+0x12d/0x250 fs/read_write.c:619
    do_syscall_x64 arch/x86/entry/common.c:50 [inline]
    do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
    entry_SYSCALL_64_after_hwframe+0x44/0xae

The reproducer was trying to read /proc/$PID/smaps when calling
MADV_FREE at the mean time.  MADV_FREE may split THPs if it is called
for partial THP.  It may trigger the below race:

           CPU A                         CPU B
           -----                         -----
  smaps walk:                      MADV_FREE:
  page_mapcount()
    PageCompound()
                                   split_huge_page()
    page = compound_head(page)
    PageDoubleMap(page)

When calling PageDoubleMap() this page is not a tail page of THP anymore
so the BUG is triggered.

This could be fixed by elevated refcount of the page before calling
mapcount, but that would prevent it from counting migration entries, and
it seems overkilling because the race just could happen when PMD is
split so all PTE entries of tail pages are actually migration entries,
and smaps_account() does treat migration entries as mapcount == 1 as
Kirill pointed out.

Add a new parameter for smaps_account() to tell this entry is migration
entry then skip calling page_mapcount().  Don't skip getting mapcount
for device private entries since they do track references with mapcount.

Pagemap also has the similar issue although it was not reported.  Fixed
it as well.

[shy828301@gmail.com: v4]
Link: https://lkml.kernel.org/r/20220203182641.824731-1-shy828301@gmail.com
[nathan@kernel.org: avoid unused variable warning in pagemap_pmd_range()]
Link: https://lkml.kernel.org/r/20220207171049.1102239-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20220120202805.3369-1-shy828301@gmail.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: syzbot+1f52b3a18d5633fa7f82@syzkaller.appspotmail.com
Acked-by: David Hildenbrand <david@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf: fix PT_LOAD p_align values for loaders

Rui Salvaterra reported that Aisleroit solitaire crashes with "Wrong
__data_start/_end pair" assertion from libgc after update to v5.17-rc1.

Bisection pointed to commit 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD
p_align values for static PIE") that fixed handling of static PIEs, but
made the condition that guards load_bias calculation to exclude loader
binaries.

Restoring the check for presence of interpreter fixes the problem.

Link: https://lkml.kernel.org/r/20220202121433.3697146-1-rppt@kernel.org
Fixes: 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'soc-fixes-5.17-1' of git://git./linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
"This is a fairly large set of bugfixes, most of which had been sent a
  while ago but only now made it into the soc tree:

  Maintainer file updates:

   - Claudiu Beznea now co-maintains the at91 soc family, replacing
     Ludovic Desroches.

   - Michael Walle maintains the sl28cpld drivers

   - Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
     platforms

   - Alim Akhtar is an additional reviewer for Samsung platforms

  Code fixes:

   - Op-tee had a problem with object lifetime that needs a slightly
     complex fix, as well as another bug with error handling.

   - Several minor issues for the OMAP platform, including a regression
     with the timer

   - A Kconfig change to fix a build-time issue on Intel SoCFPGA

  Device tree fixes:

   - The Amlogic Meson platform fixes a boot regression on am1-odroid, a
     spurious interrupt, and a problem with reserved memory regions

   - In the i.MX platform, several bug fixes are needed to make devices
     work correctly: SD card detection, alarmtimer, and sound card on
     some board. One patch for the GPU got in there by accident and gets
     reverted again.

   - TI K3 needs a fix for J721S2 serial port numbers

   - ux500 needs a fix to mount the SD card as root on the Skomer phone"

* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
  Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
  arm64: Remove ARCH_VULCAN
  MAINTAINERS: add myself as a maintainer for the sl28cpld
  MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
  MAINTAINERS: arm: samsung: add Git tree and IRC
  ARM: dts: Fix boot regression on Skomer
  ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
  soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
  docs/ABI: testing: aspeed-uart-routing: Escape asterisk
  MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
  MAINTAINERS: Update Benjamin Gaignard maintainer status
  ARM: socfpga: fix missing RESET_CONTROLLER
  arm64: dts: meson-sm1-odroid: fix boot loop after reboot
  arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
  arm64: dts: meson-g12: add ATF BL32 reserved-memory region
  arm64: dts: meson-gx: add ATF BL32 reserved-memory region
  arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
  arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
  arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
  optee: use driver internal tee_context for some rpc
  ...

Merge tag 'pci-v5.17-fixes-4' of git://git./linux/kernel/git/helgaas/pci

Pull pci fix from Bjorn Helgaas:
"Revert a commit that reduced the number of IRQs used but resulted in
interrupt storms (Bjorn Helgaas)"

* tag 'pci-v5.17-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/portdrv: Do not setup up IRQs if there are no users"

Revert "PCI/portdrv: Do not setup up IRQs if there are no users"

This reverts commit 0e8ae5a6ff5952253cd7cc0260df838ab4c21009.

0e8ae5a6ff59 ("PCI/portdrv: Do not setup up IRQs if there are no users")
reduced usage of IRQs when we don't think we need them. But Joey, Sergiu,
and David reported choppy GUI rendering, systems that became unresponsive
every few seconds, incorrect values reported by cpufreq, and high IRQ 16
CPU usage.

Joey bisected the issues to 0e8ae5a6ff59, so revert it until we figure out
a better solution.

Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546
Reported-by: Joey Corleone <joey.corleone@mail.ru>
Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com>
Reported-by: David Spencer <dspencer577@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Cc: Jan Kiszka <jan.kiszka@siemens.com>

Merge tag 'riscv-for-linus-5.17-rc4' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

- A fix to avoid undefined behavior when stack backtracing, which
   manifests in GCC as incorrect stack addresses

- A few fixes for the XIP kernels

- A fix to tracking NUMA state on CPU hotplug

- Support for the recently relesaed binutils-2.38, which changed the
   default ISA version to one without CSRs or fence.i in 'I' extension

* tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix build with binutils 2.38
  riscv: cpu-hotplug: clear cpu from numa map when teardown
  riscv: extable: fix err reg writing in dedicated uaccess handler
  riscv/mm: Add XIP_FIXUP for riscv_pfn_base
  riscv/mm: Add XIP_FIXUP for phys_ram_base
  riscv: Fix XIP_FIXUP_FLASH_OFFSET
  riscv: eliminate unreliable __builtin_frame_address(1)

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Enable Cortex-A510 erratum 2051678 by default as we do with other
   errata.

- arm64 IORT: Check the node revision for PMCG resources to cope with
   old firmware based on a broken revision of the spec that had no way
   to describe the second register page (when an implementation is using
   the recommended RELOC_CTRS feature).

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ACPI/IORT: Check node revision for PMCG resources
  arm64: Enable Cortex-A510 erratum 2051678 by default

Merge tag 'acpi-5.17-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
  issues related to wakeup from suspend-to-idle on x86.

  Specifics:

   - Revert a recent change that attempted to avoid issues with
     conflicting address ranges during PCI initialization, because it
     turned out to introduce a regression (Hans de Goede).

   - Revert a change that limited EC GPE wakeups from suspend-to-idle to
     systems based on Intel hardware, because it turned out that systems
     based on hardware from other vendors depended on that functionality
     too (Mario Limonciello).

   - Fix two issues related to the handling of wakeup interrupts and
     wakeup events signaled through the EC GPE during suspend-to-idle on
     x86 (Rafael Wysocki)"

* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
  PM: s2idle: ACPI: Fix wakeup interrupts handling
  ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
  ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"

Merge tag 'gfs2-v5.16-rc3-fixes2' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fixes from Andreas Gruenbacher:

- Revert debug commit that causes unexpected data corruption

- Fix muti-block reservation regression

* tag 'gfs2-v5.16-rc3-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix gfs2_release for non-writers regression
Revert "gfs2: check context in gfs2_glock_put"

Merge tag 'block-5.17-2022-02-11' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request
      - nvme-tcp: fix bogus request completion when failing to send AER
        (Sagi Grimberg)
      - add the missing nvme_complete_req tracepoint for batched
        completion (Bean Huo)

- Revert of the loop async autoclear issue that has continued to plague
   us this release. A few patchsets exists to improve this, but they are
   too invasive to be considered at this point (Tetsuo)

* tag 'block-5.17-2022-02-11' of git://git.kernel.dk/linux-block:
  loop: revert "make autoclear operation asynchronous"
  nvme-tcp: fix bogus request completion when failing to send AER
  nvme: add nvme_complete_req tracepoint for batched completion

Merge tag 'io_uring-5.17-2022-02-11' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

- Fix a false-positive warning from an older gcc (Alviro)

- Allow oom killer invocations from io_uring_setup (Shakeel)

* tag 'io_uring-5.17-2022-02-11' of git://git.kernel.dk/linux-block:
mm: io_uring: allow oom-killer from io_uring_setup
io_uring: Clean up a false-positive warning from GCC 9.3.0

Merge tag 'gpio-fixes-for-v5.17-rc4' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

- use sleeping variants of GPIO accessors where needed
   in gpio-aggregator

- never return kernel's internal error codes to user-space
   in gpiolib core

- use the correct register for reading output values in
   gpio-sifive

- fix line hogging in gpio-sim

* tag 'gpio-fixes-for-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: fix hogs with custom chip labels
  gpio: sifive: use the correct register to read output values
  gpiolib: Never return internal error codes to user space
  gpio: aggregator: Fix calling into sleeping GPIO controllers

Merge tag 'ata-5.17-rc4-2' of git://git./linux/kernel/git/dlemoal/libata

Pull ata fixes from Damien Le Moal:
"A couple of additional fixes for 5.17-rc4:

   - Fix compilation warnings in the sata_fsl driver (powerpc) (me)

   - Disable TRIM commands on M88V29 devices as these commands are
     failing despite the device reporting it supports TRIM (Zoltan)"

* tag 'ata-5.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-core: Disable TRIM on M88V29
  ata: sata_fsl: fix sscanf() and sysfs_emit() format strings

Merge tag 'drm-fixes-2022-02-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Regular fixes pull, mostly i915 and amd fixes, along with a
  maintainers update for fbdev core.

  Otherwise just some build fixes and vc4 HDMI fixes.

  fbdev:
   - MAINTAINERS: add Daniel as fbdev core module maintainer
   - build warning fix
   - implicit type cast fix

  panel:
   - simple: Fix assignments from panel_dpi_probe()

  privacy-screen:
   - fix docs warning

  i915:
   - non-x86 build fix
   - ttm error propogation fix
   - drrs on hsw/ivb disabled
   - BIOS readout fixes
   - missing stackdepot oops fix

  amd:
   - DCN 3.1 display fixes
   - GC 10.3.1 harvest fix
   - Page flip irq fix
   - hwmon label fix
   - DCN 2.0 display fix

  rockchip:
   - fix HDMI error cleanup
   - fix RK3399 VOP register fields

  vc4:
   - HDMI fixes
   - remove redundant code"

* tag 'drm-fixes-2022-02-11' of git://anongit.freedesktop.org/drm/drm: (25 commits)
  drm/amdgpu/display: change pipe policy for DCN 2.0
  drm/amd/pm: fix hwmon node of power1_label create issue
  drm/amd/display: keep eDP Vdd on when eDP stream is already enabled
  drm/amd/display: fix yellow carp wm clamping
  drm/amd/display: Cap pflip irqs per max otg number
  drm/amdgpu: add utcl2_harvest to gc 10.3.1
  display/amd: decrease message verbosity about watermarks table failure
  drm/rockchip: vop: Correct RK3399 VOP register fields
  drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
  MAINTAINERS: Add entry for fbdev core
  fbcon: Avoid 'cap' set but not used warning
  drm/privacy-screen: Fix sphinx warning
  drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL
  drm/i915: Populate pipe dbuf slices more accurately during readout
  drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration
  drm/i915: Fix header test for !CONFIG_X86
  drm/i915/ttm: Return some errors instead of trying memcpy move
  drm/i915: Disable DRRS on IVB/HSW port != A
  drm/i915: Fix oops due to missing stack depot
  drm/vc4: crtc: Fix redundant variable assignment
  ...

Merge tag 'trace-v5.17-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fixes to the RTLA tooling

- A fix to a tp_printk overriding tp_printk_stop_on_boot on the
   command line

* tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix tp_printk option related with tp_printk_stop_on_boot
  MAINTAINERS: Add RTLA entry
  rtla: Fix segmentation fault when failing to enable -t
  rtla/trace: Error message fixup
  rtla/utils: Fix session duration parsing
  rtla: Follow kernel version

gfs2: Fix gfs2_release for non-writers regression

When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."

Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE. Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:

kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.

This patch moves the check back inside the check for FMODE_WRITE.

Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Revert "gfs2: check context in gfs2_glock_put"

It turns out that the might_sleep() call that commit 660a6126f8c3 adds
is triggering occasional data corruption in testing. We're not sure
about the root cause yet, but since this commit was added as a debugging
aid only, revert it for now.

This reverts commit 660a6126f8c3208f6df8d552039cda078a8426d1.

Fixes: 660a6126f8c3 ("gfs2: check context in gfs2_glock_put")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Merge branch 'acpi-x86'

Merge a revert of a problematic commit for 5.17-rc4.

* acpi-x86:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"

Merge tag 'usb-serial-5.17-rc4' of https://git./linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.17-rc4

Here are some new device ids for 5.17-rc4.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: cp210x: add CPI Bulk Coin Recycler id
  USB: serial: cp210x: add NCR Retail IO box id
  USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
  USB: serial: option: add ZTE MF286D modem
  USB: serial: ch341: add support for GW Instek USB2.0-Serial devices

loop: revert "make autoclear operation asynchronous"

The kernel test robot is reporting that xfstest which does

umount ext2 on xfs
umount xfs

sequence started failing, for commit 322c4293ecc58110 ("loop: make
autoclear operation asynchronous") removed a guarantee that fput() of
backing file is processed before lo_release() from close() returns to
user mode.

And syzbot is reporting that deferring destroy_workqueue() from
__loop_clr_fd() to a WQ context did not help [1]. Revert that commit.

Link: https://syzkaller.appspot.com/bug?extid=831661966588c802aae9
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: syzbot <syzbot+831661966588c802aae9@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20220211071554.3424-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>

iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL

If we fail to copy the just created file descriptor to userland, we
try to clean up by putting back 'fd' and freeing 'ib'. The code uses
put_unused_fd() for the former which is wrong, as the file descriptor
was already published by fd_install() which gets called internally by
anon_inode_getfd().

This makes the error handling code leaving a half cleaned up file
descriptor table around and a partially destructed 'file' object,
allowing userland to play use-after-free tricks on us, by abusing
the still usable fd and making the code operate on a dangling
'file->private_data' pointer.

Instead of leaving the kernel in a partially corrupted state, don't
attempt to explicitly clean up and leave this to the process exit
path that'll release any still valid fds, including the one created
by the previous call to anon_inode_getfd(). Simply return -EFAULT to
indicate the error.

Fixes: f73f7f4da581 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device")
Cc: stable@kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Nuno Sa <Nuno.Sa@analog.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: drd: fix soft connect when gadget is unconfigured

When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110

Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect

Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable@kernel.org
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644423353-17859-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: rndis: check size of RNDIS_MSG_SET command

Check the size of the RNDIS_MSG_SET command given to us before
attempting to respond to an invalid message size.

Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: gadget: validate interface OS descriptor requests

Stall the control endpoint in case provided index exceeds array size of
MAX_CONFIG_INTERFACES or when the retrieved function pointer is null.

Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Unregister device on component_add() failure

Commit 8c67d06f3fd9 ("usb: Link the ports to the connectors they are
attached to") creates a link to the USB Type-C connector for every new
port that is added when possible. If component_add() fails,
usb_hub_create_port_device() prints a warning but does not unregister
the device and does not return errors to the callers.

Syzbot reported a "WARNING in component_del()".

Fix this issue in usb_hub_create_port_device by calling device_unregister()
and returning the errors from component_add().

Fixes: 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to")
Reported-and-tested-by: syzbot+60df062e1c41940cae0f@syzkaller.appspotmail.com
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220209164500.8769-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

- The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
- A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
- A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

samples/seccomp: Adjust sample to also provide kill option

As a quick way to test SECCOMP_RET_KILL, have a negative errno mean to
kill the process.

While we're in here, also swap the arch and syscall arguments so they're
ordered more like how seccomp filters order them.

Signed-off-by: Kees Cook <keescook@chromium.org>

seccomp: Invalidate seccomp mode to catch death failures

If seccomp tries to kill a process, it should never see that process
again. To enforce this proactively, switch the mode to something
impossible. If encountered: WARN, reject all syscalls, and attempt to
kill the process again even harder.

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>

signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE

Fatal SIGSYS signals (i.e. seccomp RET_KILL_* syscall filter actions)
were not being delivered to ptraced pid namespace init processes. Make
sure the SIGNAL_UNKILLABLE doesn't get set for these cases.

Reported-by: Robert Święcki <robert@swiecki.net>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/878rui8u4a.fsf@email.froward.int.ebiederm.org

Merge tag 'amd-drm-fixes-5.17-2022-02-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.17-2022-02-09:

amdgpu:
- DCN 3.1 display fixes
- GC 10.3.1 harvest fix
- Page flip irq fix
- hwmon label fix
- DCN 2.0 display fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210041137.5926-1-alexander.deucher@amd.com