Olga Kornievskaia [Sun, 26 Apr 2020 15:30:00 +0000 (11:30 -0400)]
NFSv4.1 fix rpc_call_done assignment for BIND_CONN_TO_SESSION
[ Upstream commit
1c709b766e73e54d64b1dde1b7cfbcf25bcb15b9 ]
Fixes:
02a95dee8cf0 ("NFS add callback_ops to nfs4_proc_bind_conn_to_session_callback")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fedor Tokarev [Sat, 28 Mar 2020 11:56:55 +0000 (14:56 +0300)]
net: sunrpc: Fix off-by-one issues in 'rpc_ntop6'
[ Upstream commit
118917d696dc59fd3e1741012c2f9db2294bed6f ]
Fix off-by-one issues in 'rpc_ntop6':
- 'snprintf' returns the number of characters which would have been
written if enough space had been available, excluding the terminating
null byte. Thus, a return value of 'sizeof(scopebuf)' means that the
last character was dropped.
- 'strcat' adds a terminating null byte to the string, thus if len ==
buflen, the null byte is written past the end of the buffer.
Signed-off-by: Fedor Tokarev <ftokarev@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Williams [Thu, 21 May 2020 21:06:17 +0000 (14:06 -0700)]
/dev/mem: Revoke mappings when a driver claims the region
[ Upstream commit
3234ac664a870e6ea69ae3a57d824cd7edbeacc5 ]
Close the hole of holding a mapping over kernel driver takeover event of
a given address range.
Commit
90a545e98126 ("restrict /dev/mem to idle io memory ranges")
introduced CONFIG_IO_STRICT_DEVMEM with the goal of protecting the
kernel against scenarios where a /dev/mem user tramples memory that a
kernel driver owns. However, this protection only prevents *new* read(),
write() and mmap() requests. Established mappings prior to the driver
calling request_mem_region() are left alone.
Especially with persistent memory, and the core kernel metadata that is
stored there, there are plentiful scenarios for a /dev/mem user to
violate the expectations of the driver and cause amplified damage.
Teach request_mem_region() to find and shoot down active /dev/mem
mappings that it believes it has successfully claimed for the exclusive
use of the driver. Effectively a driver call to request_mem_region()
becomes a hole-punch on the /dev/mem device.
The typical usage of unmap_mapping_range() is part of
truncate_pagecache() to punch a hole in a file, but in this case the
implementation is only doing the "first half" of a hole punch. Namely it
is just evacuating current established mappings of the "hole", and it
relies on the fact that /dev/mem establishes mappings in terms of
absolute physical address offsets. Once existing mmap users are
invalidated they can attempt to re-establish the mapping, or attempt to
continue issuing read(2) / write(2) to the invalidated extent, but they
will then be subject to the CONFIG_IO_STRICT_DEVMEM checking that can
block those subsequent accesses.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes:
90a545e98126 ("restrict /dev/mem to idle io memory ranges")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/159009507306.847224.8502634072429766747.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Hubbard [Wed, 27 May 2020 01:26:26 +0000 (18:26 -0700)]
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
[ Upstream commit
57343d51613227373759f5b0f2eede257fd4b82e ]
This fixes the case of get_user_pages_fast() returning a -errno.
The result needs to be stored in a signed integer. And for safe
signed/unsigned comparisons, it's best to keep everything signed.
And get_user_pages_fast() also expects a signed value for number
of pages to pin.
Therefore, change most relevant variables, from u32 to int. Leave
"n" unsigned, for convenience in checking for overflow. And provide
a WARN_ON_ONCE() and early return, if overflow occurs.
Also, as long as we're tidying up: rename the page array from page,
to pages, in order to match the conventions used in most other call
sites.
Fixes:
20ec628e8007e ("misc: xilinx_sdfec: Add ability to configure LDPC")
Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200527012628.1100649-2-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eddie James [Wed, 8 Apr 2020 20:36:16 +0000 (15:36 -0500)]
clk: ast2600: Fix AHB clock divider for A1
[ Upstream commit
2d491066ccd4286538450c227fc5094ceb04b494 ]
The latest specs for the AST2600 A1 chip include some different bit
definitions for calculating the AHB clock divider. Implement these in
order to get the correct AHB clock value in Linux.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lkml.kernel.org/r/20200408203616.4031-1-eajames@linux.ibm.com
Fixes:
d3d04f6c330a ("clk: Add support for AST2600 SoC")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunyan Zhang [Tue, 19 May 2020 03:00:36 +0000 (11:00 +0800)]
clk: sprd: return correct type of value for _sprd_pll_recalc_rate
[ Upstream commit
c2f30986d418f26abefc2eec90ebf06716c970d2 ]
The function _sprd_pll_recalc_rate() defines return value to unsigned
long, but it would return a negative value when malloc fail, changing
to return its parent_rate makes more sense, since if the callback
.recalc_rate() is not set, the framework returns the parent_rate as
well.
Fixes:
3e37b005580b ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lkml.kernel.org/r/20200519030036.1785-2-zhang.lyra@gmail.com
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Sun, 10 May 2020 05:18:34 +0000 (01:18 -0400)]
KVM: PPC: Book3S: Fix some RCU-list locks
[ Upstream commit
ab8b65be183180c3eef405d449163964ecc4b571 ]
It is unsafe to traverse kvm->arch.spapr_tce_tables and
stt->iommu_tables without the RCU read lock held. Also, add
cond_resched_rcu() in places with the RCU read lock held that could take
a while to finish.
arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
no locks held by qemu-kvm/4265.
stack backtrace:
CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-
20200508+ #2
Call Trace:
[
c000201a8690f720] [
c000000000715948] dump_stack+0xfc/0x174 (unreliable)
[
c000201a8690f770] [
c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164
[
c000201a8690f7f0] [
c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm]
[
c000201a8690f870] [
c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm]
[
c000201a8690f8a0] [
c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm]
[
c000201a8690f8f0] [
c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm]
[
c000201a8690f990] [
c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm]
[
c000201a8690f9c0] [
c0000000005223f4] __fput+0x124/0x330
[
c000201a8690fa20] [
c000000000151cd8] task_work_run+0xb8/0x130
[
c000201a8690fa70] [
c0000000001197e8] do_exit+0x4e8/0xfa0
[
c000201a8690fb70] [
c00000000011a374] do_group_exit+0x64/0xd0
[
c000201a8690fbb0] [
c000000000132c90] get_signal+0x1f0/0x1200
[
c000201a8690fcc0] [
c000000000020690] do_notify_resume+0x130/0x3c0
[
c000201a8690fda0] [
c000000000038d64] syscall_exit_prepare+0x1a4/0x280
[
c000201a8690fe20] [
c00000000000c8f8] system_call_common+0xf8/0x278
====
arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4264:
#0:
c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1:
c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0:
c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
====
arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by qemu-kvm/4257:
#0:
c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Wed, 13 May 2020 13:39:15 +0000 (09:39 -0400)]
KVM: PPC: Book3S HV: Ignore kmemleak false positives
[ Upstream commit
0aca8a5575544bd21b3363058afb8f1e81505150 ]
kvmppc_pmd_alloc() and kvmppc_pte_alloc() allocate some memory but then
pud_populate() and pmd_populate() will use __pa() to reference the newly
allocated memory.
Since kmemleak is unable to track the physical memory resulting in false
positives, silence those by using kmemleak_ignore().
unreferenced object 0xc000201c382a1000 (size 4096):
comm "qemu-kvm", pid 124828, jiffies
4295733767 (age 341.250s)
hex dump (first 32 bytes):
c0 00 20 09 f4 60 03 87 c0 00 20 10 72 a0 03 87 .. ..`.... .r...
c0 00 20 0e 13 a0 03 87 c0 00 20 1b dc c0 03 87 .. ....... .....
backtrace:
[<
000000004cc2790f>] kvmppc_create_pte+0x838/0xd20 [kvm_hv]
kvmppc_pmd_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:366
(inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:590
[<
00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
[<
00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
[<
0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
[<
000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
[<
00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
[<
00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
[<
000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
[<
0000000048155cd6>] ksys_ioctl+0xd8/0x130
[<
0000000041ffeaa7>] sys_ioctl+0x28/0x40
[<
000000004afc4310>] system_call_exception+0x114/0x1e0
[<
00000000fb70a873>] system_call_common+0xf0/0x278
unreferenced object 0xc0002001f0c03900 (size 256):
comm "qemu-kvm", pid 124830, jiffies
4295735235 (age 326.570s)
hex dump (first 32 bytes):
c0 00 20 10 fa a0 03 87 c0 00 20 10 fa a1 03 87 .. ....... .....
c0 00 20 10 fa a2 03 87 c0 00 20 10 fa a3 03 87 .. ....... .....
backtrace:
[<
0000000023f675b8>] kvmppc_create_pte+0x854/0xd20 [kvm_hv]
kvmppc_pte_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:356
(inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:593
[<
00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv]
[<
00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv]
[<
0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv]
[<
000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv]
[<
00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm]
[<
00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm]
[<
000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm]
[<
0000000048155cd6>] ksys_ioctl+0xd8/0x130
[<
0000000041ffeaa7>] sys_ioctl+0x28/0x40
[<
000000004afc4310>] system_call_exception+0x114/0x1e0
[<
00000000fb70a873>] system_call_common+0xf0/0x278
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeffrey Hugo [Mon, 25 May 2020 20:41:25 +0000 (13:41 -0700)]
scsi: ufs-qcom: Fix scheduling while atomic issue
[ Upstream commit
3be60b564de49875e47974c37fabced893cd0931 ]
ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be
called from atomic context in the following flow:
ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors ->
ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump ->
ufs_qcom_dump_dbg_regs
This causes a boot crash on the Lenovo Miix 630 when the interrupt is
handled on the idle thread.
Fix the issue by switching to udelay().
Link: https://lore.kernel.org/r/20200525204125.46171-1-jeffrey.l.hugo@gmail.com
Fixes:
9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Sat, 16 May 2020 08:08:06 +0000 (01:08 -0700)]
clk: bcm2835: Fix return type of bcm2835_register_gate
[ Upstream commit
f376c43bec4f8ee8d1ba5c5c4cfbd6e84fb279cb ]
bcm2835_register_gate is used as a callback for the clk_register member
of bcm2835_clk_desc, which expects a struct clk_hw * return type but
bcm2835_register_gate returns a struct clk *.
This discrepancy is hidden by the fact that bcm2835_register_gate is
cast to the typedef bcm2835_clk_register by the _REGISTER macro. This
turns out to be a control flow integrity violation, which is how this
was noticed.
Change the return type of bcm2835_register_gate to be struct clk_hw *
and use clk_hw_register_gate to do so. This should be a non-functional
change as clk_register_gate calls clk_hw_register_gate anyways but this
is needed to avoid issues with further changes.
Fixes:
b19f009d4510 ("clk: bcm2835: Migrate to clk_hw based registration and OF APIs")
Link: https://github.com/ClangBuiltLinux/linux/issues/1028
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lkml.kernel.org/r/20200516080806.1459784-1-natechancellor@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Sat, 23 May 2020 10:11:29 +0000 (13:11 +0300)]
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
[ Upstream commit
9d7464b18892332e35ff37f0b024429a1a9835e6 ]
The pr_debug() dereferences "cmd" after we already freed it by calling
tcmu_free_cmd(cmd). The debug printk needs to be done earlier.
Link: https://lore.kernel.org/r/20200523101129.GB98132@mwanda
Fixes:
61fb24822166 ("scsi: target: tcmu: Userspace must not complete queued commands")
Reviewed-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiushi Wu [Mon, 25 May 2020 05:50:11 +0000 (00:50 -0500)]
ASoC: fix incomplete error-handling in img_i2s_in_probe.
[ Upstream commit
25bf943e4e7b47282bd86ae7d39e039217ebb007 ]
Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()"
if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding
"pm_runtime_put()" into this error path.
Fixes:
f65bb92ca12e ("ASoC: img-i2s-in: Add runtime PM")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe Leroy [Tue, 19 May 2020 05:48:56 +0000 (05:48 +0000)]
powerpc/32s: Don't warn when mapping RO data ROX.
[ Upstream commit
4b19f96a81bceaf0bcf44d79c0855c61158065ec ]
Mapping RO data as ROX is not an issue since that data
cannot be modified to introduce an exploit.
PPC64 accepts to have RO data mapped ROX, as a trade off
between kernel size and strictness of protection.
On PPC32, kernel size is even more critical as amount of
memory is usually small.
Depending on the number of available IBATs, the last IBATs
might overflow the end of text. Only warn if it crosses
the end of RO data.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6499f8eeb2a36330e5c9fc1cee9a79374875bd54.1589866984.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Wed, 22 Apr 2020 09:08:33 +0000 (11:08 +0200)]
mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
[ Upstream commit
97eda5dcc2cde5dcc778bef7a9344db3b6bf8ef5 ]
When STMFX supply is stopped, spurious interrupt can occur. To avoid that,
disable the interrupt in suspend before disabling the regulator and
re-enable it at the end of resume.
Fixes:
06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Wed, 22 Apr 2020 09:08:32 +0000 (11:08 +0200)]
mfd: stmfx: Fix stmfx_irq_init error path
[ Upstream commit
60c2c4bcb9202acad4cc26af20b44b6bd7874f7b ]
In case the interrupt signal can't be configured, IRQ domain needs to be
removed.
Fixes:
06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Amelie Delaunay [Wed, 22 Apr 2020 09:08:31 +0000 (11:08 +0200)]
mfd: stmfx: Reset chip on resume as supply was disabled
[ Upstream commit
e583649d87ec090444aa5347af0927cd6e8581ae ]
STMFX supply is disabled during suspend. To avoid a too early access to
the STMFX firmware on resume, reset the chip and wait for its firmware to
be loaded.
Fixes:
06252ade9156 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Borislav Petkov [Mon, 25 May 2020 10:38:39 +0000 (12:38 +0200)]
x86/apic: Make TSC deadline timer detection message visible
[ Upstream commit
de308d1815c9e8fe602a958c5c76142ff6501d75 ]
The commit
c84cb3735fd5 ("x86/apic: Move TSC deadline timer debug printk")
removed the message which said that the deadline timer was enabled.
It added a pr_debug() message which is issued when deadline timer
validation succeeds.
Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise
pr_debug() calls get optimized away if DEBUG is not defined in the
compilation unit.
Therefore, make the above message pr_info() so that it is visible in
dmesg.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200525104218.27018-1-bp@alien8.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Potnuri Bharat Teja [Sun, 24 May 2020 19:08:14 +0000 (00:38 +0530)]
RDMA/iw_cxgb4: cleanup device debugfs entries on ULD remove
[ Upstream commit
49ea0c036ede81f126f1a9389d377999fdf5c5a1 ]
Remove device specific debugfs entries immediately if LLD detaches a
particular ULD device in case of fatal PCI errors.
Link: https://lore.kernel.org/r/20200524190814.17599-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Siddharth Gupta [Wed, 6 May 2020 01:52:37 +0000 (18:52 -0700)]
scripts: headers_install: Exit with error on config leak
[ Upstream commit
5967577231f9b19acd5a59485e9075964065bbe3 ]
Misuse of CONFIG_* in UAPI headers should result in an error. These config
options can be set in userspace by the user application which includes
these headers to control the APIs and structures being used in a kernel
which supports multiple targets.
Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pawel Laszczak [Mon, 18 May 2020 10:08:45 +0000 (12:08 +0200)]
usb: gadget: Fix issue with config_ep_by_speed function
[ Upstream commit
5d363120aa548ba52d58907a295eee25f8207ed2 ]
This patch adds new config_ep_by_speed_and_alt function which
extends the config_ep_by_speed about alt parameter.
This additional parameter allows to find proper usb_ss_ep_comp_descriptor.
Problem has appeared during testing f_tcm (BOT/UAS) driver function.
f_tcm function for SS use array of headers for both BOT/UAS alternate
setting:
static struct usb_descriptor_header *uasp_ss_function_desc[] = {
(struct usb_descriptor_header *) &bot_intf_desc,
(struct usb_descriptor_header *) &uasp_ss_bi_desc,
(struct usb_descriptor_header *) &bot_bi_ep_comp_desc,
(struct usb_descriptor_header *) &uasp_ss_bo_desc,
(struct usb_descriptor_header *) &bot_bo_ep_comp_desc,
(struct usb_descriptor_header *) &uasp_intf_desc,
(struct usb_descriptor_header *) &uasp_ss_bi_desc,
(struct usb_descriptor_header *) &uasp_bi_ep_comp_desc,
(struct usb_descriptor_header *) &uasp_bi_pipe_desc,
(struct usb_descriptor_header *) &uasp_ss_bo_desc,
(struct usb_descriptor_header *) &uasp_bo_ep_comp_desc,
(struct usb_descriptor_header *) &uasp_bo_pipe_desc,
(struct usb_descriptor_header *) &uasp_ss_status_desc,
(struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc,
(struct usb_descriptor_header *) &uasp_status_pipe_desc,
(struct usb_descriptor_header *) &uasp_ss_cmd_desc,
(struct usb_descriptor_header *) &uasp_cmd_comp_desc,
(struct usb_descriptor_header *) &uasp_cmd_pipe_desc,
NULL,
};
The first 5 descriptors are associated with BOT alternate setting,
and others are associated with UAS.
During handling UAS alternate setting f_tcm driver invokes
config_ep_by_speed and this function sets incorrect companion endpoint
descriptor in usb_ep object.
Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this
case set ep->comp_desc to uasp_ss_bi_desc.
This is due to the fact that it searches endpoint based on endpoint
address:
for_each_ep_desc(speed_desc, d_spd) {
chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
if (chosen_desc->bEndpoitAddress == _ep->address)
goto ep_found;
}
And in result it uses the descriptor from BOT alternate setting
instead UAS.
Finally, it causes that controller driver during enabling endpoints
detect that just enabled endpoint for bot.
Signed-off-by: Jayshri Pawar <jpawar@cadence.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qiushi Wu [Sat, 23 May 2020 04:06:25 +0000 (23:06 -0500)]
usb: gadget: fix potential double-free in m66592_probe.
[ Upstream commit
44734a594196bf1d474212f38fe3a0d37a73278b ]
m66592_free_request() is called under label "err_add_udc"
and "clean_up", and m66592->ep0_req is not set to NULL after
first free, leading to a double-free. Fix this issue by
setting m66592->ep0_req to NULL after the first free.
Fixes:
0f91349b89f3 ("usb: gadget: convert all users to the new udc infrastructure")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Thu, 21 May 2020 15:13:00 +0000 (16:13 +0100)]
usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check
[ Upstream commit
eafa80041645cd7604c4357b1a0cd4a3c81f2227 ]
Currently pointer ep is being dereferenced before it is null checked
leading to a null pointer dereference issue. Fix this by only assigning
pointer udc once ep is known to be not null. Also remove a debug
message that requires a valid udc which may not be possible at that
point.
Addresses-Coverity: ("Dereference before null check")
Fixes:
24a28e428351 ("USB: gadget driver for LPC32xx")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Thu, 23 Apr 2020 16:29:24 +0000 (09:29 -0700)]
USB: gadget: udc: s3c2410_udc: Remove pointless NULL check in s3c2410_udc_nuke
[ Upstream commit
7a0fbcf7c308920bc6116b3a5fb21c8cc5fec128 ]
Clang warns:
drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of
address of 'ep->queue' equal to a null pointer is always false
[-Wtautological-pointer-compare]
if (&ep->queue == NULL)
~~~~^~~~~ ~~~~
1 warning generated.
It is not wrong, queue is not a pointer so if ep is not NULL, the
address of queue cannot be NULL. No other driver does a check like this
and this check has been around since the driver was first introduced,
presumably with no issues so it does not seem like this check should be
something else. Just remove it.
Commit
afe956c577b2d ("kbuild: Enable -Wtautological-compare") exposed
this but it is not the root cause of the warning.
Fixes:
3fc154b6b8134 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Link: https://github.com/ClangBuiltLinux/linux/issues/1004
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabrice Gasnier [Thu, 23 Apr 2020 11:55:53 +0000 (13:55 +0200)]
usb: dwc2: gadget: move gadget resume after the core is in L0 state
[ Upstream commit
8c935deacebb8fac8f41378701eb79d12f3c2e2d ]
When the remote wakeup interrupt is triggered, lx_state is resumed from L2
to L0 state. But when the gadget resume is called, lx_state is still L2.
This prevents the resume callback to queue any request. Any attempt
to queue a request from resume callback will result in:
- "submit request only in active state" debug message to be issued
- dwc2_hsotg_ep_queue() returns -EAGAIN
Call the gadget resume routine after the core is in L0 state.
Fixes:
f81f46e1f530 ("usb: dwc2: implement hibernation during bus suspend/resume")
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Riedmueller [Fri, 3 Apr 2020 13:07:28 +0000 (15:07 +0200)]
watchdog: da9062: No need to ping manually before setting timeout
[ Upstream commit
a0948ddba65f4f6d3cfb5e2b84685485d0452966 ]
There is actually no need to ping the watchdog before disabling it
during timeout change. Disabling the watchdog already takes care of
resetting the counter.
This fixes an issue during boot when the userspace watchdog handler takes
over and the watchdog is already running. Opening the watchdog in this case
leads to the first ping and directly after that without the required
heartbeat delay a second ping issued by the set_timeout call. Due to the
missing delay this resulted in a reset.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maor Gottlieb [Thu, 21 May 2020 07:26:50 +0000 (10:26 +0300)]
IB/cma: Fix ports memory leak in cma_configfs
[ Upstream commit
63a3345c2d42a9b29e1ce2d3a4043689b3995cea ]
The allocated ports structure in never freed. The free function should be
called by release_cma_ports_group, but the group is never released since
we don't remove its default group.
Remove default groups when device group is deleted.
Fixes:
045959db65c6 ("IB/cma: Add configfs for rdma_cm")
Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Wed, 29 Apr 2020 16:42:30 +0000 (17:42 +0100)]
PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
[ Upstream commit
87dccf09323fc363bd0d072fcc12b96622ab8c69 ]
The vim3l board does not work with a standard PCIe switch (ASM1184e),
spitting all kind of errors - hinting at HW misconfiguration (no link,
port enumeration issues, etc).
According to the the Synopsys DWC PCIe Reference Manual, in the section
dedicated to the PLCR register, bit 7 is described (FAST_LINK_MODE) as:
"Sets all internal timers to fast mode for simulation purposes."
it is sound to set this bit from a simulation perspective, but on actual
silicon, which expects timers to have a nominal value, it is not.
Make sure the FAST_LINK_MODE bit is cleared when configuring the RC
to solve this problem.
Link: https://lore.kernel.org/r/20200429164230.309922-1-maz@kernel.org
Fixes:
9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marc Zyngier [Fri, 1 May 2020 11:39:21 +0000 (12:39 +0100)]
PCI: dwc: Fix inner MSI IRQ domain registration
[ Upstream commit
0414b93e78d87ecc24ae1a7e61fe97deb29fa2f4 ]
On a system that uses the internal DWC MSI widget, I get this
warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected:
debugfs: File ':soc:pcie@
fc000000' in directory 'domains' already present!
This is due to the fact that the DWC MSI code tries to register two
IRQ domains for the same firmware node, without telling the low
level code how to distinguish them (by setting a bus token). This
further confuses debugfs which tries to create corresponding
files for each domain.
Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is
the closest thing we have as to "generic MSI".
Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Helgaas [Thu, 21 May 2020 20:40:07 +0000 (15:40 -0500)]
PCI/PTM: Inherit Switch Downstream Port PTM settings from Upstream Port
[ Upstream commit
7b38fd9760f51cc83d80eed2cfbde8b5ead9e93a ]
Except for Endpoints, we enable PTM at enumeration-time. Previously we did
not account for the fact that Switch Downstream Ports are not permitted to
have a PTM capability; their PTM behavior is controlled by the Upstream
Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM
capability, we did not mark them as "ptm_enabled", which meant that
pci_enable_ptm() on an Endpoint failed because there was no PTM path to it.
Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM
enabled.
Fixes:
eec097d43100 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints")
Reported-by: Aditya Paluri <Venkata.AdityaPaluri@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hannes Reinecke [Tue, 19 May 2020 08:14:19 +0000 (10:14 +0200)]
dm zoned: return NULL if dmz_get_zone_for_reclaim() fails to find a zone
[ Upstream commit
489dc0f06a5837f87482c0ce61d830d24e17082e ]
The only case where dmz_get_zone_for_reclaim() cannot return a zone is
if the respective lists are empty. So we should just return a simple
NULL value here as we really don't have an error code which would make
sense.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Fri, 6 Mar 2020 04:48:52 +0000 (23:48 -0500)]
powerpc/64s/pgtable: fix an undefined behaviour
[ Upstream commit
c2e929b18cea6cbf71364f22d742d9aad7f4677a ]
Booting a power9 server with hash MMU could trigger an undefined
behaviour because pud_offset(p4d, 0) will do,
0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10)
Fix it by converting pud_index() and friends to static inline
functions.
UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15
shift exponent 34 is too large for 32-bit type 'int'
CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-
20200303+ #13
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
ubsan_epilogue+0x18/0x78
__ubsan_handle_shift_out_of_bounds+0x160/0x21c
walk_pagetables+0x2cc/0x700
walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282
(inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311
ptdump_check_wx+0x8c/0xf0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x194
ret_from_kernel_thread+0x5c/0x74
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Link: https://lore.kernel.org/r/20200306044852.3236-1-cai@lca.pw
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vidya Sagar [Thu, 14 May 2020 13:54:37 +0000 (19:24 +0530)]
arm64: tegra: Fix flag for 64-bit resources in 'ranges' property
[ Upstream commit
3482a7afb261e2de9269a7f9ad0f4a3a82a83a53 ]
Fix flag in PCIe controllers device-tree nodes 'ranges' property to correctly
represent 64-bit resources.
Fixes:
2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Hunter [Fri, 1 May 2020 07:27:56 +0000 (08:27 +0100)]
arm64: tegra: Fix ethernet phy-mode for Jetson Xavier
[ Upstream commit
bba25915b172c72f6fa635f091624d799e3c9cae ]
The 'phy-mode' property is currently defined as 'rgmii' for Jetson
Xavier. This indicates that the RGMII RX and TX delays are set by the
MAC and the internal delays set by the PHY are not used.
If the Marvell PHY driver is enabled, such that it is used and not the
generic PHY, ethernet failures are seen (DHCP is failing to obtain an
IP address) and this is caused because the Marvell PHY driver is
disabling the internal RX and TX delays. For Jetson Xavier the internal
PHY RX and TX delay should be used and so fix this by setting the
'phy-mode' to 'rgmii-id' and not 'rgmii'.
Fixes:
f89b58ce71a9 ("arm64: tegra: Add ethernet controller on Tegra194")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miklos Szeredi [Wed, 20 May 2020 09:39:35 +0000 (11:39 +0200)]
fuse: copy_file_range should truncate cache
[ Upstream commit
9b46418c40fe910e6537618f9932a8be78a3dd6c ]
After the copy operation completes the cache is not up-to-date. Truncate
all pages in the interval that has successfully been copied.
Truncating completely copied dirty pages is okay, since the data has been
overwritten anyway. Truncating partially copied dirty pages is not okay;
add a comment for now.
Fixes:
88bc7d5097a1 ("fuse: add support for copy_file_range()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miklos Szeredi [Wed, 20 May 2020 09:39:35 +0000 (11:39 +0200)]
fuse: fix copy_file_range cache issues
[ Upstream commit
2c4656dfd994538176db30ce09c02cc0dfc361ae ]
a) Dirty cache needs to be written back not just in the writeback_cache
case, since the dirty pages may come from memory maps.
b) The fuse_writeback_range() helper takes an inclusive interval, so the
end position needs to be pos+len-1 instead of pos+len.
Fixes:
88bc7d5097a1 ("fuse: add support for copy_file_range()")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Wed, 6 May 2020 05:14:10 +0000 (05:14 +0000)]
firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
[ Upstream commit
89f12d6509bff004852c51cb713a439a86816b24 ]
'chan_name' is malloced in imx_scu_probe() and should be freed
before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes:
edbee095fafb ("firmware: imx: add SCU firmware driver support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bodo Stroesser [Mon, 18 May 2020 16:48:33 +0000 (18:48 +0200)]
scsi: target: tcmu: Userspace must not complete queued commands
[ Upstream commit
61fb2482216679b9e1e797440c148bb143a5040a ]
When tcmu queues a new command - no matter whether in command ring or in
qfull_queue - a cmd_id from IDR udev->commands is assigned to the command.
If userspace sends a wrong command completion containing the cmd_id of a
command on the qfull_queue, tcmu_handle_completions() finds the command in
the IDR and calls tcmu_handle_completion() for it. This might do some nasty
things because commands in qfull_queue do not have a valid dbi list.
To fix this bug, we no longer add queued commands to the idr. Instead the
cmd_id is assign when a command is written to the command ring.
Due to this change I had to adapt the source code at several places where
up to now an idr_for_each had been done.
[mkp: fix checkpatch warnings]
Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.com
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lang Cheng [Fri, 8 May 2020 09:45:52 +0000 (17:45 +0800)]
RDMA/hns: Fix cmdq parameter of querying pf timer resource
[ Upstream commit
441c88d5b3ff80108ff536c6cf80591187015403 ]
The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).
Fixes:
0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.com
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lijun Ou [Fri, 8 May 2020 09:45:51 +0000 (17:45 +0800)]
RDMA/hns: Bugfix for querying qkey
[ Upstream commit
349be276509455ac2f19fa4051ed773082c6a27e ]
The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.
Fixes:
926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Tue, 19 May 2020 10:26:52 +0000 (12:26 +0200)]
clk: samsung: exynos5433: Add IGNORE_UNUSED flag to sclk_i2s1
[ Upstream commit
25bdae0f1c6609ceaf55fe6700654f0be2253d8e ]
Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to
match its behaviour with SCLK clock for AUD_I2S (I2S0) device until
a proper fix for Exynos I2S driver is ready.
This fixes the following synchronous abort issue revealed by the probe
order change caused by the commit
93d2e4322aa7 ("of: platform: Batch
fwnode parsing when adding all top level devices")
Internal error: synchronous external abort:
96000210 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701
Hardware name: Samsung TM2E board (DT)
Workqueue: events deferred_probe_work_func
pstate:
60000005 (nZCv daif -PAN -UAO)
pc : samsung_i2s_probe+0x768/0x8f0
lr : samsung_i2s_probe+0x688/0x8f0
...
Call trace:
samsung_i2s_probe+0x768/0x8f0
platform_drv_probe+0x50/0xa8
really_probe+0x108/0x370
driver_probe_device+0x54/0xb8
__device_attach_driver+0x90/0xc0
bus_for_each_drv+0x70/0xc8
__device_attach+0xdc/0x140
device_initial_probe+0x10/0x18
bus_probe_device+0x94/0xa0
deferred_probe_work_func+0x70/0xa8
process_one_work+0x2a8/0x718
worker_thread+0x48/0x470
kthread+0x134/0x160
ret_from_fork+0x10/0x1c
Code:
17ffffaf d503201f f94086c0 91003000 (
88dffc00)
---[ end trace
ccf721c9400ddbd6 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Souptick Joarder [Mon, 18 May 2020 18:19:51 +0000 (23:49 +0530)]
fpga: dfl: afu: Corrected error handling levels
[ Upstream commit
c9d7e3da1f3c4cf5dddfc5d7ce4d76d013aba1cc ]
Corrected error handling goto sequnece. Level put_pages should
be called when pinned pages >= 0 && pinned != npages. Level
free_pages should be called when pinned pages < 0.
Fixes:
fa8dda1edef9 ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support")
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1589825991-3545-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gregory CLEMENT [Mon, 18 May 2020 08:45:13 +0000 (10:45 +0200)]
tty: n_gsm: Fix bogus i++ in gsm_data_kick
[ Upstream commit
4dd31f1ffec6c370c3c2e0c605628bf5e16d5c46 ]
When submitting the previous fix "tty: n_gsm: Fix waking up upper tty
layer when room available". It was suggested to switch from a while to
a for loop, but when doing it, there was a remaining bogus i++.
This patch removes this i++ and also reorganizes the code making it more
compact.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200518084517.2173242-3-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tang Bin [Wed, 13 May 2020 13:26:47 +0000 (21:26 +0800)]
USB: host: ehci-mxc: Add error handling in ehci_mxc_drv_probe()
[ Upstream commit
d49292025f79693d3348f8e2029a8b4703be0f0a ]
The function ehci_mxc_drv_probe() does not perform sufficient error
checking after executing platform_get_irq(), thus fix it.
Fixes:
7e8d5cd93fac ("USB: Add EHCI support for MX27 and MX31 based boards")
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Mon, 18 May 2020 07:24:16 +0000 (09:24 +0200)]
ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT8-A tablet
[ Upstream commit
0e0e10fde0e9808d1991268f5dca69fb36c025f7 ]
The Toshiba Encore WT8-A tablet almost fully works with the default
settings for non-CR Bay Trail devices. The only problem is that its
jack-detect switch is not inverted (it is active high instead of
the normal active low).
Add a quirk for this model using the default settings +
BYT_RT5640_JD_NOT_INV.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200518072416.5348-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roy Spliet [Tue, 7 Apr 2020 17:07:37 +0000 (18:07 +0100)]
drm/msm/mdp5: Fix mdp5_init error path for failed mdp5_kms allocation
[ Upstream commit
e4337877c5d578722c0716f131fb774522013cf5 ]
When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined
behaviour, likely a nullptr exception or use-after-free troubles.
Signed-off-by: Roy Spliet <nouveau@spliet.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Mon, 18 May 2020 15:49:29 +0000 (16:49 +0100)]
usb/ohci-platform: Fix a warning when hibernating
[ Upstream commit
1cb3b0095c3d0bb96912bfbbce4fc006d41f367c ]
The following warning was observed when attempting to suspend to disk
using a USB flash as a swap device.
[ 111.779649] ------------[ cut here ]------------
[ 111.788382] URB (____ptrval____) submitted while active
[ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[ 111.805417] Modules linked in:
[ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545
[ 111.817796] Hardware name: ARM Juno development board (r2) (DT)
[ 111.823896] Workqueue: usb_hub_wq hub_event
[ 111.828217] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 111.833156] pc : usb_submit_urb+0x3d8/0x590
[ 111.837471] lr : usb_submit_urb+0x3d8/0x590
[ 111.841783] sp :
ffff800018de38b0
[ 111.845205] x29:
ffff800018de38b0 x28:
0000000000000003
[ 111.850682] x27:
ffff000970530b20 x26:
ffff8000133fd000
[ 111.856159] x25:
ffff8000133fd000 x24:
ffff800018de3b38
[ 111.861635] x23:
0000000000000004 x22:
0000000000000c00
[ 111.867112] x21:
0000000000000000 x20:
00000000fffffff0
[ 111.872589] x19:
ffff0009704e7a00 x18:
ffffffffffffffff
[ 111.878065] x17:
00000000a7c8f4bc x16:
000000002af33de8
[ 111.883542] x15:
ffff8000133fda88 x14:
0720072007200720
[ 111.889019] x13:
0720072007200720 x12:
0720072007200720
[ 111.894496] x11:
0000000000000000 x10:
00000000a5286134
[ 111.899973] x9 :
0000000000000002 x8 :
ffff000970c837a0
[ 111.905449] x7 :
0000000000000000 x6 :
ffff800018de3570
[ 111.910926] x5 :
0000000000000001 x4 :
0000000000000003
[ 111.916401] x3 :
0000000000000000 x2 :
ffff800013427118
[ 111.921879] x1 :
9d4e965b4b7d7c00 x0 :
0000000000000000
[ 111.927356] Call trace:
[ 111.929892] usb_submit_urb+0x3d8/0x590
[ 111.933852] hub_activate+0x108/0x7f0
[ 111.937633] hub_resume+0xac/0x148
[ 111.941149] usb_resume_interface.isra.10+0x60/0x138
[ 111.946265] usb_resume_both+0xe4/0x140
[ 111.950225] usb_runtime_resume+0x24/0x30
[ 111.954365] __rpm_callback+0xdc/0x138
[ 111.958236] rpm_callback+0x34/0x98
[ 111.961841] rpm_resume+0x4a8/0x720
[ 111.965445] rpm_resume+0x50c/0x720
[ 111.969049] __pm_runtime_resume+0x4c/0xb8
[ 111.973276] usb_autopm_get_interface+0x28/0x60
[ 111.977948] hub_event+0x80/0x16d8
[ 111.981466] process_one_work+0x2a4/0x748
[ 111.985604] worker_thread+0x48/0x498
[ 111.989387] kthread+0x13c/0x140
[ 111.992725] ret_from_fork+0x10/0x18
[ 111.996415] irq event stamp: 354
[ 111.999756] hardirqs last enabled at (353): [<
ffff80001019ea1c>] console_unlock+0x504/0x5b8
[ 112.008441] hardirqs last disabled at (354): [<
ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[ 112.017479] softirqs last enabled at (350): [<
ffff8000100818a4>] __do_softirq+0x4bc/0x568
[ 112.025984] softirqs last disabled at (343): [<
ffff8000101145a4>] irq_exit+0x144/0x150
[ 112.034129] ---[ end trace
dc96030b9cf6c8a3 ]---
The problem was tracked down to a missing call to
pm_runtime_set_active() on resume in ohci-platform.
Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
CC: Tony Prisk <linux@prisktech.co.nz>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Mathias Nyman <mathias.nyman@intel.com>
CC: Oliver Neukum <oneukum@suse.de>
CC: linux-arm-kernel@lists.infradead.org
CC: linux-usb@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Williamson [Wed, 8 Apr 2020 17:45:28 +0000 (11:45 -0600)]
vfio-pci: Mask cap zero
[ Upstream commit
bc138db1b96264b9c1779cf18d5a3b186aa90066 ]
The PCI Code and ID Assignment Specification changed capability ID 0
from reserved to a NULL capability in the v1.1 revision. The NULL
capability is defined to include only the 16-bit capability header,
ie. only the ID and next pointer. Unfortunately vfio-pci creates a
map of config space, where ID 0 is used to reserve the standard type
0 header. Finding an actual capability with this ID therefore results
in a bogus range marked in that map and conflicts with subsequent
capabilities. As this seems to be a dummy capability anyway and we
already support dropping capabilities, let's hide this one rather than
delving into the potentially subtle dependencies within our map.
Seen on an NVIDIA Tesla T4.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geoff Levand [Sat, 9 May 2020 18:58:32 +0000 (18:58 +0000)]
powerpc/ps3: Fix kexec shutdown hang
[ Upstream commit
126554465d93b10662742128918a5fc338cda4aa ]
The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines
are called very late in the shutdown via kexec's mmu_cleanup_all
routine. By the time mmu_cleanup_all runs it is too late to use
udbg_printf, and calling it will cause PS3 systems to hang.
Remove all debugging statements from ps3_mm_region_destroy() and
ps3_mm_vas_destroy() and replace any error reporting with calls
to lv1_panic.
With this change builds with 'DEBUG' defined will not cause kexec
reboots to hang, and builds with 'DEBUG' defined or not will end
in lv1_panic if an error is encountered.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7325c4af2b4c989c19d6a26b90b1fec9c0615ddf.1589049250.git.geoff@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bharat Gooty [Wed, 13 May 2020 17:39:47 +0000 (23:09 +0530)]
drivers: phy: sr-usb: do not use internal fsm for USB2 phy init
[ Upstream commit
6f0577d1411337a0d97d545abe4a784e9e611516 ]
During different reboot cycles, USB PHY PLL may not always lock
during initialization and therefore can cause USB to be not usable.
Hence do not use internal FSM programming sequence for the USB
PHY initialization.
Fixes:
4dcddbb38b64 ("phy: sr-usb: Add Stingray USB PHY driver")
Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Link: https://lore.kernel.org/r/20200513173947.10919-1-rayagonda.kokatanur@broadcom.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Fri, 8 May 2020 04:33:58 +0000 (14:33 +1000)]
powerpc/pseries/ras: Fix FWNMI_VALID off by one
[ Upstream commit
deb70f7a35a22dffa55b2c3aac71bc6fb0f486ce ]
This was discovered developing qemu fwnmi sreset support. This
off-by-one bug means the last 16 bytes of the rtas area can not
be used for a 16 byte save area.
It's not a serious bug, and QEMU implementation has to retain a
workaround for old kernels, but it's good to tighten it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Fri, 8 May 2020 04:33:53 +0000 (14:33 +1000)]
powerpc/64s/exception: Fix machine check no-loss idle wakeup
[ Upstream commit
8a5054d8cbbe03c68dcb0957c291c942132e4101 ]
The architecture allows for machine check exceptions to cause idle
wakeups which resume at the 0x200 address which has to return via
the idle wakeup code, but the early machine check handler is run
first.
The case of a no state-loss sleep is broken because the early
handler uses non-volatile register r1 , which is needed for the wakeup
protocol, but it is not restored.
Fix this by loading r1 from the MCE exception frame before returning
to the idle wakeup code. Also update the comment which has become
stale since the idle rewrite in C.
This crash was found and fix confirmed with a machine check injection
test in qemu powernv model (which is not upstream in qemu yet).
Fixes:
10d91611f426d ("powerpc/64s: Reimplement book3s idle code in C")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200508043408.886394-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Feng Tang [Fri, 17 Apr 2020 04:48:28 +0000 (12:48 +0800)]
ipmi: use vzalloc instead of kmalloc for user creation
[ Upstream commit
7c47a219b95d0e06b5ef5fcc7bad807895015eac ]
We met mulitple times of failure of staring bmc-watchdog,
due to the runtime memory allocation failure of order 4.
bmc-watchdog: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 1 PID: 2571 Comm: bmc-watchdog Not tainted 5.5.0-00045-g7d6bb61d6188c #1
Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0015.
110720180833 11/07/2018
Call Trace:
dump_stack+0x66/0x8b
warn_alloc+0xfe/0x160
__alloc_pages_slowpath+0xd3e/0xd80
__alloc_pages_nodemask+0x2f0/0x340
kmalloc_order+0x18/0x70
kmalloc_order_trace+0x1d/0xb0
ipmi_create_user+0x55/0x2c0 [ipmi_msghandler]
ipmi_open+0x72/0x110 [ipmi_devintf]
chrdev_open+0xcb/0x1e0
do_dentry_open+0x1ce/0x380
path_openat+0x305/0x14f0
do_filp_open+0x9b/0x110
do_sys_open+0x1bd/0x250
do_syscall_64+0x5b/0x1f0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Using vzalloc/vfree for creating ipmi_user heals the
problem
Thanks to Stephen Rothwell for finding the vmalloc.h
inclusion issue.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oded Gabbay [Fri, 27 Mar 2020 13:38:37 +0000 (16:38 +0300)]
habanalabs: increase timeout during reset
[ Upstream commit
7a65ee046b2238e053f6ebb610e1a082cfc49490 ]
When doing training, the DL framework (e.g. tensorflow) performs hundreds
of thousands of memory allocations and mappings. In case the driver needs
to perform hard-reset during training, the driver kills the application and
unmaps all those memory allocations. Unfortunately, because of that large
amount of mappings, the driver isn't able to do that in the current timeout
(5 seconds). Therefore, increase the timeout significantly to 30 seconds
to avoid situation where the driver resets the device with active mappings,
which sometime can cause a kernel bug.
BTW, it doesn't mean we will spend all the 30 seconds because the reset
thread checks every one second if the unmap operation is done.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mika Westerberg [Thu, 14 May 2020 13:30:43 +0000 (16:30 +0300)]
PCI/PM: Assume ports without DLL Link Active train links in 100 ms
[ Upstream commit
ec411e02b7a2e785a4ed9ed283207cd14f48699d ]
Kai-Heng Feng reported that it takes a long time (> 1 s) to resume
Thunderbolt-connected devices from both runtime suspend and system sleep
(s2idle).
This was because some Downstream Ports that support > 5 GT/s do not also
support Data Link Layer Link Active reporting. Per PCIe r5.0 sec 6.6.1:
With a Downstream Port that supports Link speeds greater than 5.0 GT/s,
software must wait a minimum of 100 ms after Link training completes
before sending a Configuration Request to the device immediately below
that Port. Software can determine when Link training completes by polling
the Data Link Layer Link Active bit or by setting up an associated
interrupt (see Section 6.7.3.3).
Sec 7.5.3.6 requires such Ports to support DLL Link Active reporting, but
at least the Intel JHL6240 Thunderbolt 3 Bridge [8086:15c0] and the Intel
JHL7540 Thunderbolt 3 Bridge [8086:15ea] do not.
Previously we tried to wait for Link training to complete, but since there
was no DLL Link Active reporting, all we could do was wait the worst-case
1000 ms, then another 100 ms.
Instead of using the supported speeds to determine whether to wait for Link
training, check whether the port supports DLL Link Active reporting. The
Ports in question do not, so we'll wait only the 100 ms required for Ports
that support Link speeds <= 5 GT/s.
This of course assumes these Ports always train the Link within 100 ms even
if they are operating at > 5 GT/s, which is not required by the spec.
[bhelgaas: commit log, comment]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206837
Link: https://lore.kernel.org/r/20200514133043.27429-1-mika.westerberg@linux.intel.com
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cristian Klein [Fri, 8 May 2020 15:26:04 +0000 (17:26 +0200)]
HID: Add quirks for Trust Panora Graphic Tablet
[ Upstream commit
fb68ada81e65d593b51544fa43c284322107a742 ]
The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen
movement, pen pressure and pen buttons. Interface one reports tablet buttons
and tablet scroll. Both use the mouse protocol.
Without these quirks, libinput gets confused about what device it talks to.
For completeness, here is the usbhid-dump:
```
$ sudo usbhid-dump -d 145f:0212
003:013:001:DESCRIPTOR
1588949402.559961
05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07
81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52
09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36
A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20
75 01 81 02 C0
003:013:000:DESCRIPTOR
1588949402.563942
05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01
29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01
05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08
95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01
A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01
81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95
02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10
81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF
00 09 00 75 08 95 07 B1 02 C0 C0
```
Signed-off-by: Cristian Klein <cristian.klein@elastisys.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Erwin Burema [Sun, 10 May 2020 18:29:11 +0000 (20:29 +0200)]
ALSA: usb-audio: Add duplex sound support for USB devices using implicit feedback
[ Upstream commit
10ce77e4817fef99e1166be7e6685a80c63bf77f ]
For USB sound devices using implicit feedback the endpoint used for
this feedback should be able to be opened twice, once for required
feedback and second time for audio data. This way these devices can be
put in duplex audio mode. Since this only works if the settings of the
endpoint don't change a check is included for this.
This fixes bug 207023 ("MOTU M2 regression on duplex audio") and
should also fix bug 103751 ("M-Audio Fast Track Ultra usb audio device
will not operate full-duplex")
Fixes:
c249177944b6 ("ALSA: usb-audio: add implicit fb quirk for MOTU M Series")
Signed-off-by: Erwin Burema <e.burema@gmail.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207023
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=103751
Link: https://lore.kernel.org/r/2410739.SCZni40SNb@alpha-wolf
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gregory CLEMENT [Tue, 12 May 2020 11:53:23 +0000 (13:53 +0200)]
tty: n_gsm: Fix waking up upper tty layer when room available
[ Upstream commit
01dbb362f0a114fbce19c8abe4cd6f4710e934d5 ]
Warn the upper layer when n_gms is ready to receive data
again. Without this the associated virtual tty remains blocked
indefinitely.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200512115323.1447922-4-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gregory CLEMENT [Tue, 12 May 2020 11:53:22 +0000 (13:53 +0200)]
tty: n_gsm: Fix SOF skipping
[ Upstream commit
84d6f81c1fb58b56eba81ff0a36cf31946064b40 ]
For at least some modems like the TELIT LE910, skipping SOF makes
transfers blocking indefinitely after a short amount of data
transferred.
Given the small improvement provided by skipping the SOF (just one
byte on about 100 bytes), it seems better to completely remove this
"feature" than make it optional.
Fixes:
e1eaea46bb40 ("tty: n_gsm line discipline")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20200512115323.1447922-3-gregory.clement@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Tue, 28 Apr 2020 12:31:30 +0000 (22:31 +1000)]
powerpc/64: Don't initialise init_task->thread.regs
[ Upstream commit
7ffa8b7dc11752827329e4e84a574ea6aaf24716 ]
Aneesh increased the size of struct pt_regs by 16 bytes and started
seeing this WARN_ON:
smp: Bringing up secondary CPUs ...
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318
NIP:
c00000000001a2b4 LR:
c00000000001a29c CTR:
c0000000031d0000
REGS:
c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+)
MSR:
800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR:
48048224 XER:
00000000
CFAR:
c000000000019cc8 IRQMASK: 1
GPR00:
c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033
GPR04:
0000000000000001 0000000000000000 0000000000000077 30206d7372203164
GPR08:
0000000000002000 0000000002002000 800000000280b033 3230303030303030
GPR12:
0000000000008800 c0000000031d0000 0000000000800050 0000000002000066
GPR16:
000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890
GPR20:
00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080
GPR24:
c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90
GPR28:
c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200
NIP [
c00000000001a2b4] giveup_all+0xb4/0x110
LR [
c00000000001a29c] giveup_all+0x9c/0x110
Call Trace:
[
c0000000026d3c20] [
c00000000001a264] giveup_all+0x64/0x110 (unreliable)
[
c0000000026d3c90] [
c00000000001ae34] __switch_to+0x104/0x480
[
c0000000026d3cf0] [
c000000000e0b8a0] __schedule+0x320/0x970
[
c0000000026d3dd0] [
c000000000e0c518] schedule_idle+0x38/0x70
[
c0000000026d3df0] [
c00000000019c7c8] do_idle+0x248/0x3f0
[
c0000000026d3e70] [
c00000000019cbb8] cpu_startup_entry+0x38/0x40
[
c0000000026d3ea0] [
c000000000011bb0] rest_init+0xe0/0xf8
[
c0000000026d3ed0] [
c000000002004820] start_kernel+0x990/0x9e0
[
c0000000026d3f90] [
c00000000000c49c] start_here_common+0x1c/0x400
Which was unexpected. The warning is checking the thread.regs->msr
value of the task we are switching from:
usermsr = tsk->thread.regs->msr;
...
WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set.
Dumping tsk->thread.regs->msr we see that it's: 0x1db60000
Which is not a normal looking MSR, in fact the only valid bit is
MSR_VSX, all the other bits are reserved in the current definition of
the MSR.
We can see from the oops that it was swapper/0 that we were switching
from when we hit the warning, ie. init_task. So its thread.regs points
to the base (high addresses) in init_stack.
Dumping the content of init_task->thread.regs, with the members of
pt_regs annotated (the 16 bytes larger version), we see:
0000000000000000 c000000002780080 gpr[0] gpr[1]
0000000000000000 c000000002666008 gpr[2] gpr[3]
c0000000026d3ed0 0000000000000078 gpr[4] gpr[5]
c000000000011b68 c000000002780080 gpr[6] gpr[7]
0000000000000000 0000000000000000 gpr[8] gpr[9]
c0000000026d3f90 0000800000002200 gpr[10] gpr[11]
c000000002004820 c0000000026d7200 gpr[12] gpr[13]
000000001db60000 c0000000010aabe8 gpr[14] gpr[15]
c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17]
c00000000294d598 0000000000000000 gpr[18] gpr[19]
0000000000000000 0000000000001ff8 gpr[20] gpr[21]
0000000000000000 c00000000206d608 gpr[22] gpr[23]
c00000000278e0cc 0000000000000000 gpr[24] gpr[25]
000000002fff0000 c000000000000000 gpr[26] gpr[27]
0000000002000000 0000000000000028 gpr[28] gpr[29]
000000001db60000 0000000004750000 gpr[30] gpr[31]
0000000002000000 000000001db60000 nip msr
0000000000000000 0000000000000000 orig_r3 ctr
c00000000000c49c 0000000000000000 link xer
0000000000000000 0000000000000000 ccr softe
0000000000000000 0000000000000000 trap dar
0000000000000000 0000000000000000 dsisr result
0000000000000000 0000000000000000 ppr kuap
0000000000000000 0000000000000000 pad[2] pad[3]
This looks suspiciously like stack frames, not a pt_regs. If we look
closely we can see return addresses from the stack trace above,
c000000002004820 (start_kernel) and
c00000000000c49c (start_here_common).
init_task->thread.regs is setup at build time in processor.h:
#define INIT_THREAD { \
.ksp = INIT_SP, \
.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
The early boot code where we setup the initial stack is:
LOAD_REG_ADDR(r3,init_thread_union)
/* set up a stack pointer */
LOAD_REG_IMMEDIATE(r1,THREAD_SIZE)
add r1,r3,r1
li r0,0
stdu r0,-STACK_FRAME_OVERHEAD(r1)
Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD).
Which is far too small to contain a pt_regs.
So the result is init_task->thread.regs is pointing at some stack
frames on the init stack, not at a pt_regs.
We have gotten away with this for so long because with pt_regs at its
current size the MSR happens to point into the first frame, at a
location that is not written to by the early asm. With the 16 byte
expansion the MSR falls into the second frame, which is used by the
compiler, and collides with a saved register that tends to be
non-zero.
As far as I can see this has been wrong since the original merge of
64-bit ppc support, back in 2002.
Conceptually swapper should have no regs, it never entered from
userspace, and in fact that's what we do on 32-bit. It's also
presumably what the "bogus" comment is referring to.
So I think the right fix is to just not-initialise regs at all. I'm
slightly worried this will break some code that isn't prepared for a
NULL regs, but we'll have to see.
Remove the comment in head_64.S which refers to us setting up the
regs (even though we never did), and is otherwise not really accurate
any more.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200428123130.73078-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Herring [Wed, 13 May 2020 22:38:58 +0000 (17:38 -0500)]
PCI: Fix pci_register_host_bridge() device_register() error handling
[ Upstream commit
1b54ae8327a4d630111c8d88ba7906483ec6010b ]
If device_register() has an error, we should bail out of
pci_register_host_bridge() rather than continuing on.
Fixes:
37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface")
Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tero Kristo [Wed, 29 Apr 2020 13:13:39 +0000 (16:13 +0300)]
clk: ti: composite: fix memory leak
[ Upstream commit
c7c1cbbc9217ebb5601b88d138d4a5358548de9d ]
The parent_names is never released for a component clock definition,
causing some memory leak. Fix by releasing it once it is no longer
needed.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.com
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Wed, 6 May 2020 13:56:25 +0000 (13:56 +0000)]
USB: ohci-sm501: fix error return code in ohci_hcd_sm501_drv_probe()
[ Upstream commit
b919e077cccfbb77beb98809568b2fb0b4d113ec ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes:
7d9e6f5aebe8 ("usb: host: ohci-sm501: init genalloc for local memory")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20200506135625.106910-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Thu, 7 May 2020 21:34:28 +0000 (23:34 +0200)]
dlm: remove BUG() before panic()
[ Upstream commit
fe204591cc9480347af7d2d6029b24a62e449486 ]
Building a kernel with clang sometimes fails with an objtool error in dlm:
fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc
The problem is that BUG() never returns and the compiler knows
that anything after it is unreachable, however the panic still
emits some code that does not get fully eliminated.
Having both BUG() and panic() is really pointless as the BUG()
kills the current process and the subsequent panic() never hits.
In most cases, we probably don't really want either and should
replace the DLM_ASSERT() statements with WARN_ON(), as has
been done for some of them.
Remove the BUG() here so the user at least sees the panic message
and we can reliably build randconfig kernels.
Fixes:
e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dafna Hirschfeld [Wed, 6 May 2020 10:09:03 +0000 (12:09 +0200)]
pinctrl: rockchip: fix memleak in rockchip_dt_node_to_map
[ Upstream commit
d7faa8ffb6be57bf8233a4b5a636d76b83c51ce7 ]
In function rockchip_dt_node_to_map, a new_map variable is
allocated by:
new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
GFP_KERNEL);
This uses devres and attaches new_map to the pinctrl driver.
This cause a leak since new_map is not released when the probed
driver is removed. Fix it by using kcalloc to allocate new_map
and free it in `rockchip_dt_free_map`
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Tue, 12 May 2020 13:43:25 +0000 (15:43 +0200)]
ASoC: ti: omap-mcbsp: Fix an error handling path in 'asoc_mcbsp_probe()'
[ Upstream commit
03990fd58d2b7c8f7d53e514ba9b8749fac260f9 ]
If an error occurs after the call to 'omap_mcbsp_init()', the reference to
'mcbsp->fclk' must be decremented, as already done in the remove function.
This can be achieved easily by using the devm_ variant of 'clk_get()'
when the reference is taken in 'omap_mcbsp_init()'
This fixes the leak in the probe and has the side effect to simplify both
the error handling path of 'omap_mcbsp_init()' and the remove function.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Peter Ujfalusi <peter.ujflausi@ti.com>
Link: https://lore.kernel.org/r/20200512134325.252073-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Tue, 12 May 2020 10:07:05 +0000 (12:07 +0200)]
ASoC: ux500: mop500: Fix some refcounted resources issues
[ Upstream commit
4e8748fcaeec073e3ba794871ce86c545e4f961f ]
There are 2 issues here:
- if one of the 'of_parse_phandle' fails, calling 'mop500_of_node_put()'
is a no-op because the 'mop500_dai_links' structure has not been
initialized yet, so the referenced are not decremented
- The reference stored in 'mop500_dai_links[i].codecs' is refcounted
only once in the probe and must be decremented only once.
Fixes:
39013bd60e79 ("ASoC: Ux500: Dispose of device nodes correctly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200512100705.246349-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yongbo Zhang [Tue, 12 May 2020 09:30:03 +0000 (17:30 +0800)]
SoC: rsnd: add interrupt support for SSI BUSIF buffer
[ Upstream commit
66c705d07d784fb6b4622c6e47b6acae357472db ]
SSI BUSIF buffer is possible to overflow or underflow, especially in a
hypervisor environment. If there is no interrupt support, it will eventually
lead to errors in pcm data.
This patch adds overflow and underflow interrupt support for SSI BUSIF buffer.
Reported-by: Chen Li <licheng0822@thundersoft.com>
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Tested-by: Chen Li <licheng0822@thundersoft.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200512093003.28332-1-giraffesnn123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suganath Prabu S [Fri, 8 May 2020 11:07:38 +0000 (07:07 -0400)]
scsi: mpt3sas: Fix double free warnings
[ Upstream commit
cbbfdb2a2416c9f0cde913cf09670097ac281282 ]
Fix following warning from Smatch static analyser:
drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->hpr_lookup' double freed
drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools()
warn: 'ioc->internal_lookup' double freed
Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bodo Stroesser [Tue, 28 Apr 2020 18:26:17 +0000 (20:26 +0200)]
scsi: target: loopback: Fix READ with data and sensebytes
[ Upstream commit
c68a56736c129f5dd1632856956f9c3e04bae200 ]
We use tcm_loop with tape emulations running on tcmu.
In case application reads a short tape block with a longer READ, or a long
tape block with a short READ, according to SCC spec data has to be
tranferred _and_ sensebytes with ILI set and information field containing
the residual count. Similar problem also exists when using fixed block
size in READ.
Up to now tcm_loop is not prepared to handle sensebytes if input data is
provided, as in tcm_loop_queue_data_in() it only sets SAM_STAT_GOOD and, if
necessary, the residual count.
To fix the bug, the same handling for sensebytes as present in
tcm_loop_queue_status() must be done in tcm_loop_queue_data_in() also.
After adding this handling, the two function now are nearly identical, so I
created a single function with two wrappers.
Link: https://lore.kernel.org/r/20200428182617.32726-1-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Tue, 21 Apr 2020 12:00:24 +0000 (14:00 +0200)]
arm64: dts: msm8996: Fix CSI IRQ types
[ Upstream commit
4a4a26317ec8aba575f6b85789a42639937bc1a4 ]
Each IRQ_TYPE_NONE interrupt causes a warning at boot.
Fix that by defining an appropriate type.
Fixes:
e0531312e78f ("arm64: dts: qcom: msm8996: Add CAMSS support")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1587470425-13726-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Yongjun [Sat, 9 May 2020 09:33:37 +0000 (09:33 +0000)]
ASoC: SOF: core: fix error return code in sof_probe_continue()
[ Upstream commit
7d8785bc7adbb4dc5ba8ee06994107637848ded8 ]
Fix to return negative error code -ENOMEM from the IPC init error
handling case instead of 0, as done elsewhere in this function.
Fixes:
c16211d6226d ("ASoC: SOF: Add Sound Open Firmware driver core")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200509093337.78897-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Osipenko [Sun, 29 Mar 2020 16:15:44 +0000 (18:15 +0200)]
power: supply: smb347-charger: IRQSTAT_D is volatile
[ Upstream commit
c32ea07a30630ace950e07ffe7a18bdcc25898e1 ]
Fix failure when USB cable is connected:
smb347 2-006a: reading IRQSTAT_D failed
Fixes:
1502cfe19bac ("smb347-charger: Fix battery status reporting logic for charger faults")
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 9 May 2020 08:23:23 +0000 (10:23 +0200)]
power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'
[ Upstream commit
934ed3847a4ebc75b655659c4d2349ba4337941c ]
In the probe function, in case of error, resources allocated in
'lp8788_setup_adc_channel()' must be released.
This can be achieved easily by using the devm_ variant of
'iio_channel_get()'.
This has the extra benefit to simplify the remove function and to axe the
'lp8788_release_adc_channel()' function which is now useless.
Fixes:
98a276649358 ("power_supply: Add new lp8788 charger driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Sakamoto [Fri, 8 May 2020 04:36:26 +0000 (13:36 +0900)]
ALSA: firewire-lib: fix invalid assignment to union data for directional parameter
[ Upstream commit
8304cf77c92038cd1c50c27b69d30be695cc8003 ]
Although the value of FDF is used just for outgoing stream, the assignment
to union member is done for both directions of stream. At present this
causes no issue because the value of same position is reassigned later for
opposite stream. However, it's better to add if statement.
Fixes:
d3d10a4a1b19 ("ALSA: firewire-lib: use union for directional parameters")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200508043635.349339-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viacheslav Dubeyko [Fri, 10 Apr 2020 08:07:08 +0000 (11:07 +0300)]
scsi: qla2xxx: Fix warning after FC target reset
[ Upstream commit
f839544ccff60cbe534282aac68858fc3fb278ca ]
Currently, FC target reset finishes with the warning message:
[84010.596893] ------------[ cut here ]------------
[84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm
[84010.596975] configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
[84010.597001] Supported: Yes, External
[84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G OE 4.12.14-197.29-default #1 SLE15-SP1
[84010.597006] task:
c000000a104c0000 task.stack:
c000000b52188000
[84010.597007] NIP:
d00000001ffd7f78 LR:
d00000001ffd7f6c CTR:
c0000000001676c0
[84010.597008] REGS:
c000000b5218b910 TRAP: 0700 Tainted: G OE (4.12.14-197.29-default)
[84010.597008] MSR:
900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>
[84010.597015] CR:
48242424 XER:
00000000
[84010.597016] CFAR:
d00000001ff45d08 SOFTE: 1
GPR00:
d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102
GPR04:
0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000
GPR08:
c000000007793300 0000000000000000 0000000000000000 c000000a086e7818
GPR12:
0000000000002200 c000000007793300 0000000000000000 000000012bc937c0
GPR16:
000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000
GPR20:
000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70
GPR24:
00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080
GPR28:
c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8
[84010.597042] NIP [
d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.597051] LR [
d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx]
[84010.597051] Call Trace:
[84010.597061] [
c000000b5218bb90] [
d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable)
[84010.597064] [
c000000b5218bc20] [
d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx]
[84010.597067] [
c000000b5218bcb0] [
d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs]
[84010.597072] [
c000000b5218bd00] [
c0000000003d0edc] __vfs_write+0x3c/0x1e0
[84010.597074] [
c000000b5218bd90] [
c0000000003d2ea8] vfs_write+0xd8/0x220
[84010.597076] [
c000000b5218bde0] [
c0000000003d4ddc] SyS_write+0x6c/0x110
[84010.597079] [
c000000b5218be30] [
c00000000000b188] system_call+0x3c/0x130
[84010.597080] Instruction dump:
[84010.597082]
7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78
[84010.597086]
4bf6dcd9 60000000 2fa30000 419eff40 <
0fe00000>
4bffff38 e95f0058 a12a0180
[84010.597090] ---[ end trace
e32abaf6e6fee826 ]---
To reproduce:
echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging
modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
SYSTEM START
kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0
<...>
kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1
echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0
<...>
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0
echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0
<...>
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
kernel: -----------[ cut here ]-----------
kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx]
The issue happens because no real ISP reset is executed. The
qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that
vha->flags.online will be not zero for ISP reset procedure. This patch
sets vha->flags.online to 1 before calling ->abort_isp() for starting the
ISP reset.
Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yadro.com
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Viacheslav Dubeyko <v.dubeiko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Tue, 5 May 2020 17:34:21 +0000 (01:34 +0800)]
PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges
[ Upstream commit
66ff14e59e8a30690755b08bc3042359703fb07a ]
7d715a6c1ae5 ("PCI: add PCI Express ASPM support") added the ability for
Linux to enable ASPM, but for some undocumented reason, it didn't enable
ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge.
Remove this exclusion so we can enable ASPM on these links.
The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001
PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the
Intel SoC to enter deeper Package C-states, which is a significant power
savings.
[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571
Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Murray [Fri, 4 Oct 2019 13:29:41 +0000 (14:29 +0100)]
PCI: rcar: Fix incorrect programming of OB windows
[ Upstream commit
2b9f217433e31d125fb697ca7974d3de3ecc3e92 ]
The outbound windows (PCIEPAUR(x), PCIEPALR(x)) describe a mapping between
a CPU address (which is determined by the window number 'x') and a
programmed PCI address - Thus allowing the controller to translate CPU
accesses into PCI accesses.
However the existing code incorrectly writes the CPU address - lets fix
this by writing the PCI address instead.
For memory transactions, existing DT users describe a 1:1 identity mapping
and thus this change should have no effect. However the same isn't true for
I/O.
Link: https://lore.kernel.org/r/20191004132941.6660-1-andrew.murray@arm.com
Fixes:
c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver")
Tested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kuppuswamy Sathyanarayanan [Wed, 8 Apr 2020 21:40:03 +0000 (14:40 -0700)]
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
[ Upstream commit
388bcc6ecc609fca1b4920de7dc3806c98ec535e ]
If platform bus driver registration is failed then, accessing
platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock)
in __platform_driver_probe() without verifying the return value
__platform_driver_register() can lead to NULL pointer exception.
So check the return value before attempting the spin lock.
One such example is below:
For a custom usecase, I have intentionally failed the platform bus
registration and I expected all the platform device/driver
registrations to fail gracefully. But I came across this panic
issue.
[ 1.331067] BUG: kernel NULL pointer dereference, address:
00000000000000c8
[ 1.331118] #PF: supervisor write access in kernel mode
[ 1.331163] #PF: error_code(0x0002) - not-present page
[ 1.331208] PGD 0 P4D 0
[ 1.331233] Oops: 0002 [#1] PREEMPT SMP
[ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165
[ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30
[ 1.331588] RSP: 0000:
ffffc9000001be70 EFLAGS:
00010246
[ 1.331632] RAX:
0000000000000000 RBX:
00000000000000c8 RCX:
0000000000000001
[ 1.331696] RDX:
0000000000000001 RSI:
0000000000000092 RDI:
0000000000000000
[ 1.331754] RBP:
00000000ffffffed R08:
0000000000000501 R09:
0000000000000001
[ 1.331817] R10:
ffff88817abcc520 R11:
0000000000000670 R12:
00000000ffffffed
[ 1.331881] R13:
ffffffff82dbc268 R14:
ffffffff832f070a R15:
0000000000000000
[ 1.331945] FS:
0000000000000000(0000) GS:
ffff88817bd80000(0000) knlGS:
0000000000000000
[ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 1.332062] CR2:
00000000000000c8 CR3:
000000000681e001 CR4:
00000000003606e0
[ 1.332126] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 1.332189] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 1.332252] Call Trace:
[ 1.332281] __platform_driver_probe+0x92/0xee
[ 1.332323] ? rtc_dev_init+0x2b/0x2b
[ 1.332358] cmos_init+0x37/0x67
[ 1.332396] do_one_initcall+0x7d/0x168
[ 1.332428] kernel_init_freeable+0x16c/0x1c9
[ 1.332473] ? rest_init+0xc0/0xc0
[ 1.332508] kernel_init+0x5/0x100
[ 1.332543] ret_from_fork+0x1f/0x30
[ 1.332579] CR2:
00000000000000c8
[ 1.332616] ---[ end trace
3bd87f12e9010b87 ]---
[ 1.333549] note: swapper/0[1] exited with preempt_count 1
[ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[ 1.333736] Kernel Offset: disabled
Note, this can only be triggered if a driver errors out from this call,
which should never happen. If it does, the driver needs to be fixed.
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Stultz [Tue, 28 Apr 2020 18:40:50 +0000 (18:40 +0000)]
serial: amba-pl011: Make sure we initialize the port.lock spinlock
[ Upstream commit
8508f4cba308f785b2fd4b8c38849c117b407297 ]
Valentine reported seeing:
[ 3.626638] INFO: trying to register non-static key.
[ 3.626639] the code is fine but needs lockdep annotation.
[ 3.626640] turning off the locking correctness validator.
[ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116
[ 3.626646] Hardware name: HiKey960 (DT)
[ 3.626656] Workqueue: events deferred_probe_work_func
[ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
[ 3.640220] Call trace:
[ 3.640225] dump_backtrace+0x0/0x1b8
[ 3.640227] show_stack+0x20/0x30
[ 3.640230] dump_stack+0xec/0x158
[ 3.640234] register_lock_class+0x598/0x5c0
[ 3.640235] __lock_acquire+0x80/0x16c0
[ 3.640236] lock_acquire+0xf4/0x4a0
[ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8
[ 3.640245] uart_add_one_port+0x388/0x4b8
[ 3.640248] pl011_register_port+0x70/0xf0
[ 3.640250] pl011_probe+0x184/0x1b8
[ 3.640254] amba_probe+0xdc/0x180
[ 3.640256] really_probe+0xe0/0x338
[ 3.640257] driver_probe_device+0x60/0xf8
[ 3.640259] __device_attach_driver+0x8c/0xd0
[ 3.640260] bus_for_each_drv+0x84/0xd8
[ 3.640261] __device_attach+0xe4/0x140
[ 3.640263] device_initial_probe+0x1c/0x28
[ 3.640265] bus_probe_device+0xa4/0xb0
[ 3.640266] deferred_probe_work_func+0x7c/0xb8
[ 3.640269] process_one_work+0x2c0/0x768
[ 3.640271] worker_thread+0x4c/0x498
[ 3.640272] kthread+0x14c/0x158
[ 3.640275] ret_from_fork+0x10/0x1c
Which seems to be due to the fact that after allocating the uap
structure, nothing initializes the spinlock.
Its a little confusing, as uart_port_spin_lock_init() is one
place where the lock is supposed to be initialized, but it has
an exception for the case where the port is a console.
This makes it seem like a deeper fix is needed to properly
register the console, but I'm not sure what that entails, and
Andy suggested that this approach is less invasive.
Thus, this patch resolves the issue by initializing the spinlock
in the driver, and resolves the resulting warning.
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Reported-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-and-tested-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lore.kernel.org/r/20200428184050.6501-1-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Russell King [Mon, 27 Apr 2020 18:49:22 +0000 (19:49 +0100)]
i2c: pxa: fix i2c_pxa_scream_blue_murder() debug output
[ Upstream commit
88b73ee7ca4c90baf136ed5a8377fc5a9b73ac08 ]
The IRQ log output is supposed to appear on a single line. However,
commit
3a2dc1677b60 ("i2c: pxa: Update debug function to dump more info
on error") resulted in it being printed one-entry-per-line, which is
excessively long.
Fixing this is not a trivial matter; using pr_cont() doesn't work as
the previous dev_dbg() may not have been compiled in, or may be
dynamic.
Since the rest of this function output is at error level, and is also
debug output, promote this to error level as well to avoid this
problem.
Reduce the number of always zero prefix digits to save screen real-
estate.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 18 Apr 2020 08:16:37 +0000 (10:16 +0200)]
PCI: v3-semi: Fix a memory leak in v3_pci_probe() error handling paths
[ Upstream commit
bca718988b9008d0d5f504e2d318178fc84958c1 ]
If we fails somewhere in 'v3_pci_probe()', we need to free 'host'.
Use the managed version of 'pci_alloc_host_bridge()' to do that easily.
The use of managed resources is already widely used in this driver.
Link: https://lore.kernel.org/r/20200418081637.1585-1-christophe.jaillet@wanadoo.fr
Fixes:
68a15eb7bd0c ("PCI: v3-semi: Add V3 Semiconductor PCI host driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[lorenzo.pieralisi@arm.com: commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matej Dujava [Thu, 30 Apr 2020 20:09:24 +0000 (22:09 +0200)]
staging: sm750fb: add missing case while setting FB_VISUAL
[ Upstream commit
fa90133377f4a7f15a937df6ad55133bb57c5665 ]
Switch statement does not contain all cases: 8, 16, 24, 32.
This patch will add missing one (24)
Fixes:
81dee67e215b ("staging: sm750fb: add sm750 to staging")
Signed-off-by: Matej Dujava <mdujava@kocurkovo.cz>
Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkovo.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oscar Carter [Mon, 4 May 2020 15:09:11 +0000 (17:09 +0200)]
staging: wilc1000: Increase the size of wid_list array
[ Upstream commit
a4338ed2e1cf724563956ec5f91deeaabfedbe23 ]
Increase by one the size of wid_list array as index variable can reach a
value of 5. If this happens, an out-of-bounds access is performed.
Also, use a #define instead of a hard-coded literal for the new array
size.
Addresses-Coverity-ID: 1451981 ("Out-of-bounds access")
Fixes:
f5a3cb90b802d ("staging: wilc1000: add passive scan support")
Acked-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Oscar Carter <oscar.carter@gmx.com>
Link: https://lore.kernel.org/r/20200504150911.4470-1-oscar.carter@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thinh Nguyen [Sun, 29 Mar 2020 23:12:57 +0000 (16:12 -0700)]
usb: dwc3: gadget: Properly handle failed kick_transfer
[ Upstream commit
8d99087c2db863c5fa3a4a1f3cb82b3a493705ca ]
If dwc3 fails to issue START_TRANSFER/UPDATE_TRANSFER command, then we
should properly end an active transfer and give back all the started
requests. However if it's for an isoc endpoint, the failure maybe due to
bus-expiry status. In this case, don't give back the requests and wait
for the next retry.
Fixes:
72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thinh Nguyen [Thu, 5 Mar 2020 21:23:55 +0000 (13:23 -0800)]
usb: dwc3: gadget: Properly handle ClearFeature(halt)
[ Upstream commit
cb11ea56f37a36288cdd0a4799a983ee3aa437dd ]
DWC3 must not issue CLEAR_STALL command to control endpoints. The
controller automatically clears the STALL when it receives the SETUP
token. Also, when the driver receives ClearFeature(halt_ep), DWC3 must
stop any active transfer from the endpoint and give back all the
requests to the function drivers.
Fixes:
72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Tue, 28 Apr 2020 21:53:29 +0000 (23:53 +0200)]
HID: intel-ish-hid: avoid bogus uninitialized-variable warning
[ Upstream commit
0b66fb3e6b7a53688f8e20945ac78cd3d832c65f ]
Older compilers like gcc-4.8 don't see that the variable is
initialized when it is used:
In file included from include/linux/compiler_types.h:68:0,
from <command-line>:0:
drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host':
include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
^
drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here
struct shim_fw_info fw_info;
^
Make sure to initialize it before returning an error from ish_query_loader_prop().
Fixes:
91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre-Louis Bossart [Sun, 19 Apr 2020 18:51:15 +0000 (02:51 +0800)]
soundwire: slave: don't init debugfs on device registration error
[ Upstream commit
8893ab5e8ee5d7c12e0fc1dca4a309475064473d ]
The error handling flow seems incorrect, there is no reason to try and
add debugfs support if the device registration did not
succeed. Return on error.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200419185117.4233-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yong Zhi [Fri, 1 May 2020 23:44:21 +0000 (18:44 -0500)]
ASoC: max98373: reorder max98373_reset() in resume
[ Upstream commit
1a446873d7dd3a450f685928ce7f1907bde4583d ]
During S3 test, the following error was observed:
[ 726.174237] i2c_designware i2c_designware.0: platform_pm_resume+0x0/0x3d returned 0 after 0 usecs
[ 726.184187] max98373 i2c-MX98373:00: calling max98373_resume+0x0/0x30 [snd_soc_max98373] @ 12698, parent: i2c-11
[ 726.195589] max98373 i2c-MX98373:00: Reset command failed. (ret:-16)
When calling regmap_update_bits(), since map->reg_update_bits is NULL,
_regmap_read() is entered with the following logic:
if (!map->cache_bypass) {
ret = regcache_read(map, reg, val);
if (ret == 0)
return 0;
}
if (map->cache_only)
return -EBUSY;
regcache_read() hits -EINVAL because MAX98373_R2000_SW_RESET is volatile,
as map->cache_only is set by codec suspend, thus -EBUSY is returned.
Fix by moving max98373_reset() after cache_only set to false in max98373_resume().
Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Link: https://lore.kernel.org/r/1588376661-29799-1-git-send-email-yong.zhi@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Fri, 1 May 2020 21:57:17 +0000 (23:57 +0200)]
clk: meson: meson8b: Don't rely on u-boot to init all GP_PLL registers
[ Upstream commit
a29ae8600d50ece1856b062a39ed296b8b952259 ]
Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers.
In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when
booting Linux the PLL fails to lock.
The initialization sequence from u-boot is:
- put the PLL into reset
- write 0x59C88000 to HHI_GP_PLL_CNTL2
- write 0xCA463823 to HHI_GP_PLL_CNTL3
- write 0x0286A027 to HHI_GP_PLL_CNTL4
- write 0x00003000 to HHI_GP_PLL_CNTL5
- set M, N, OD and the enable bit
- take the PLL out of reset
- check if it has locked
- disable the PLL
In Linux we already initialize M, N, OD, the enable and the reset bits.
Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the
exact meaning is unknown) so the PLL can lock when the vendor u-boot did
not initialize these registers yet.
Fixes:
b882964b376f21 ("clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200501215717.735393-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudip Mukherjee [Fri, 24 Apr 2020 16:19:44 +0000 (17:19 +0100)]
thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR
[ Upstream commit
7440f518dad9d861d76c64956641eeddd3586f75 ]
On error the function ti_bandgap_get_sensor_data() returns the error
code in ERR_PTR() but we only checked if the return value is NULL or
not. And, so we can dereference an error code inside ERR_PTR.
While at it, convert a check to IS_ERR_OR_NULL.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Uwe Kleine-König [Mon, 20 Apr 2020 17:27:51 +0000 (20:27 +0300)]
gpio: pca953x: fix handling of automatic address incrementing
[ Upstream commit
bcf41dc480b179bfb669a232080a2e26dc7294b4 ]
Some of the chips supported by the pca953x driver need the most
significant bit in the address word set to automatically increment the
address pointer on subsequent reads and writes (example: PCA9505). With
this bit unset the same register is read multiple times on a multi-byte
read sequence. Other chips must not have this bit set and autoincrement
always (example: PCA9555).
Up to now this AI bit was interpreted to be part of the address, which
resulted in inconsistent regmap caching when a register was written with
AI set and then read without it. This happened for the PCA9505 in
pca953x_gpio_set_multiple() where pca953x_read_regs() bulk read from the
cache for registers 0x8-0xc and then wrote to registers 0x88-0x8c. (Side
note: reading 5 values from offset 0x8 yiels OP0 5 times because AI must
be set to get OP0-OP4, which is another bug that is resolved here as a
by-product.) The same problem happens when calls to gpio_set_value() and
gpio_set_array_value() were mixed.
With this patch the AI bit is always set for chips that support it. This
works as there are no code locations that make use of the behaviour with
AI unset (for the chips that support it).
Note that the call to pca953x_setup_gpio() had to be done a bit earlier
to make the NBANK macro work.
The history of this bug is a bit complicated. Commit
b32cecb46bdc
("gpio: pca953x: Extract the register address mangling to single
function") changed which chips and functions are affected. Commit
3b00691cc46a ("gpio: pca953x: hack to fix 24 bit gpio expanders") used
some duct tape to make the driver at least appear to work. Commit
49427232764d ("gpio: pca953x: Perform basic regmap conversion")
introduced the caching. Commit
b4818afeacbd ("gpio: pca953x: Add
set_multiple to allow multiple bits to be set in one write.") introduced
the .set_multiple() callback which didn't work for chips that need the
AI bit which was fixed later for some chips in
8958262af3fb ("gpio:
pca953x: Repair multi-byte IO address increment on PCA9575"). So I'm
sorry, I don't know which commit I should pick for a Fixes: line.
Tested-by: Marcel Gudert <m.gudert@eckelmann.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Fri, 17 Apr 2020 18:41:26 +0000 (20:41 +0200)]
clk: meson: meson8b: Fix the vclk_div{1, 2, 4, 6, 12}_en gate bits
[ Upstream commit
8bb629cfb28f4dad9d47f69249366e50ae5edc25 ]
The DIV{1,2,4,6,12}_EN bits are actually located in HHI_VID_CLK_CNTL
register:
- HHI_VID_CLK_CNTL[0] = DIV1_EN
- HHI_VID_CLK_CNTL[1] = DIV2_EN
- HHI_VID_CLK_CNTL[2] = DIV4_EN
- HHI_VID_CLK_CNTL[3] = DIV6_EN
- HHI_VID_CLK_CNTL[4] = DIV12_EN
Update the bits accordingly so we will enable the bits in the correct
register once we switch these clocks to be mutable.
Fixes:
6cb57c678bb70e ("clk: meson: meson8b: add the read-only video clock trees")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200417184127.1319871-4-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Fri, 17 Apr 2020 18:41:25 +0000 (20:41 +0200)]
clk: meson: meson8b: Fix the polarity of the RESET_N lines
[ Upstream commit
0d3051c790ed2ef6bd91b92b07220313f06b95b3 ]
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_POST and
CLKC_RESET_VID_DIVIDER_CNTL_RESET_N_PRE are active low. This means:
- asserting them requires setting the register value to 0
- de-asserting them requires setting the register value to 1
Set the register value accordingly for these two reset lines by setting
the inverted the register value compared to all other reset lines.
Fixes:
189621726bc2f6 ("clk: meson: meson8b: register the built-in reset controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200417184127.1319871-3-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Martin Blumenstingl [Fri, 17 Apr 2020 18:41:24 +0000 (20:41 +0200)]
clk: meson: meson8b: Fix the first parent of vid_pll_in_sel
[ Upstream commit
da1978ac3d6cf278dedf5edbf350445a0fff2f08 ]
Use hdmi_pll_lvds_out as parent of the vid_pll_in_sel clock. It's not
easy to see that the vendor kernel does the same, but it actually does.
meson_clk_pll_ops in mainline still cannot fully recalculate all rates
from the HDMI PLL registers because some register bits (at the time of
writing it's unknown which bits are used for this) double the HDMI PLL
output rate (compared to simply considering M, N and FRAC) for some (but
not all) PLL settings.
Update the vid_pll_in_sel parent so our clock calculation works for
simple clock settings like the CVBS output (where no rate doubling is
going on). The PLL ops need to be fixed later on for more complex clock
settings (all HDMI rates).
Fixes:
6cb57c678bb70 ("clk: meson: meson8b: add the read-only video clock trees")
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200417184127.1319871-2-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Srinivas Kandagatla [Fri, 17 Apr 2020 09:36:18 +0000 (10:36 +0100)]
slimbus: ngd: get drvdata from correct device
[ Upstream commit
b58c663059b484f7ff547d076a34cf6d7a302e56 ]
Get drvdata directly from parent instead of ngd dev, as ngd
dev can probe defer and previously set drvdata will become null.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200417093618.7929-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Raghavendra Rao Ananta [Tue, 28 Apr 2020 03:26:01 +0000 (20:26 -0700)]
tty: hvc: Fix data abort due to race in hvc_open
[ Upstream commit
e2bd1dcbe1aa34ff5570b3427c530e4332ecf0fe ]
Potentially, hvc_open() can be called in parallel when two tasks calls
open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add()
callback in the function fails, where it sets the tty->driver_data to
NULL, the parallel hvc_open() can see this NULL and cause a memory abort.
Hence, serialize hvc_open and check if tty->private_data is NULL before
proceeding ahead.
The issue can be easily reproduced by launching two tasks simultaneously
that does nothing but open() and close() on /dev/hvcX.
For example:
$ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 &
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200428032601.22127-1-rananta@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Thu, 9 Apr 2020 07:59:39 +0000 (09:59 +0200)]
s390/qdio: put thinint indicator after early error
[ Upstream commit
75e82bec6b2622c6f455b7a543fb5476a5d0eed7 ]
qdio_establish() calls qdio_setup_thinint() via qdio_setup_irq().
If the subsequent qdio_establish_thinint() fails, we miss to put the
DSCI again. Thus the DSCI isn't available for re-use. Given enough of
such errors, we could end up with having only the shared DSCI available.
Merge qdio_setup_thinint() into qdio_establish_thinint(), and deal with
such an error internally.
Fixes:
779e6e1c724d ("[S390] qdio: new qdio driver.")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Fri, 24 Apr 2020 07:40:16 +0000 (09:40 +0200)]
ALSA: usb-audio: Fix racy list management in output queue
[ Upstream commit
5b6cc38f3f3f37109ce72b60bda215a5f6892c0b ]
The linked list entry from FIFO is peeked at
queue_pending_output_urbs() but the actual element pop-out is
performed outside the spinlock, and it's potentially racy.
Do delete the link at the right place inside the spinlock.
Fixes:
8fdff6a319e7 ("ALSA: snd-usb: implement new endpoint streaming model")
Link: https://lore.kernel.org/r/20200424074016.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Tsoy [Fri, 24 Apr 2020 02:24:48 +0000 (05:24 +0300)]
ALSA: usb-audio: Improve frames size computation
[ Upstream commit
f0bd62b64016508938df9babe47f65c2c727d25c ]
For computation of the the next frame size current value of fs/fps and
accumulated fractional parts of fs/fps are used, where values are stored
in Q16.16 format. This is quite natural for computing frame size for
asynchronous endpoints driven by explicit feedback, since in this case
fs/fps is a value provided by the feedback endpoint and it's already in
the Q format. If an error is accumulated over time, the device can
adjust fs/fps value to prevent buffer overruns/underruns.
But for synchronous endpoints the accuracy provided by these computations
is not enough. Due to accumulated error the driver periodically produces
frames with incorrect size (+/- 1 audio sample).
This patch fixes this issue by implementing a different algorithm for
frame size computation. It is based on accumulating of the remainders
from division fs/fps and it doesn't accumulate errors over time. This
new method is enabled for synchronous and adaptive playback endpoints.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20200424022449.14972-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiyu Yang [Thu, 23 Apr 2020 05:15:40 +0000 (13:15 +0800)]
staging: gasket: Fix mapping refcnt leak when register/store fails
[ Upstream commit
e3436ce60cf5f5eaedda2b8c622f69feb97595e2 ]
gasket_sysfs_register_store() invokes get_mapping(), which returns a
reference of the specified gasket_sysfs_mapping object to "mapping" with
increased refcnt.
When gasket_sysfs_register_store() returns, local variable "mapping"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in one exception handling path of
gasket_sysfs_register_store(). When gasket_dev is NULL, the function
forgets to decrease the refcnt increased by get_mapping(), causing a
refcnt leak.
Fix this issue by calling put_mapping() when gasket_dev is NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1587618941-13718-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log