Linus Torvalds [Tue, 26 Oct 2010 18:37:48 +0000 (11:37 -0700)]
Merge branch 'ima-memory-use-fixes'
* ima-memory-use-fixes:
IMA: fix the ToMToU logic
IMA: explicit IMA i_flag to remove global lock on inode_delete
IMA: drop refcnt from ima_iint_cache since it isn't needed
IMA: only allocate iint when needed
IMA: move read counter into struct inode
IMA: use i_writecount rather than a private counter
IMA: use inode->i_lock to protect read and write counters
IMA: convert internal flags from long to char
IMA: use unsigned int instead of long for counters
IMA: drop the inode opencount since it isn't needed for operation
IMA: use rbtree instead of radix tree for inode information cache
Eric Paris [Mon, 25 Oct 2010 18:42:25 +0000 (14:42 -0400)]
IMA: fix the ToMToU logic
Current logic looks like this:
rc = ima_must_measure(NULL, inode, MAY_READ, FILE_CHECK);
if (rc < 0)
goto out;
if (mode & FMODE_WRITE) {
if (inode->i_readcount)
send_tomtou = true;
goto out;
}
if (atomic_read(&inode->i_writecount) > 0)
send_writers = true;
Lets assume we have a policy which states that all files opened for read
by root must be measured.
Lets assume the file has permissions 777.
Lets assume that root has the given file open for read.
Lets assume that a non-root process opens the file write.
The non-root process will get to ima_counts_get() and will check the
ima_must_measure(). Since it is not supposed to measure it will goto
out.
We should check the i_readcount no matter what since we might be causing
a ToMToU voilation!
This is close to correct, but still not quite perfect. The situation
could have been that root, which was interested in the mesurement opened
and closed the file and another process which is not interested in the
measurement is the one holding the i_readcount ATM. This is just overly
strict on ToMToU violations, which is better than not strict enough...
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:42:19 +0000 (14:42 -0400)]
IMA: explicit IMA i_flag to remove global lock on inode_delete
Currently for every removed inode IMA must take a global lock and search
the IMA rbtree looking for an associated integrity structure. Instead
we explicitly mark an inode when we add an integrity structure so we
only have to take the global lock and do the removal if it exists.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:42:12 +0000 (14:42 -0400)]
IMA: drop refcnt from ima_iint_cache since it isn't needed
Since finding a struct ima_iint_cache requires a valid struct inode, and
the struct ima_iint_cache is supposed to have the same lifetime as a
struct inode (technically they die together but don't need to be created
at the same time) we don't have to worry about the ima_iint_cache
outliving or dieing before the inode. So the refcnt isn't useful. Just
get rid of it and free the structure when the inode is freed.
Signed-off-by: Eric Paris <eapris@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:42:05 +0000 (14:42 -0400)]
IMA: only allocate iint when needed
IMA always allocates an integrity structure to hold information about
every inode, but only needed this structure to track the number of
readers and writers currently accessing a given inode. Since that
information was moved into struct inode instead of the integrity struct
this patch stops allocating the integrity stucture until it is needed.
Thus greatly reducing memory usage.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:59 +0000 (14:41 -0400)]
IMA: move read counter into struct inode
IMA currently allocated an inode integrity structure for every inode in
core. This stucture is about 120 bytes long. Most files however
(especially on a system which doesn't make use of IMA) will never need
any of this space. The problem is that if IMA is enabled we need to
know information about the number of readers and the number of writers
for every inode on the box. At the moment we collect that information
in the per inode iint structure and waste the rest of the space. This
patch moves those counters into the struct inode so we can eventually
stop allocating an IMA integrity structure except when absolutely
needed.
This patch does the minimum needed to move the location of the data.
Further cleanups, especially the location of counter updates, may still
be possible.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:52 +0000 (14:41 -0400)]
IMA: use i_writecount rather than a private counter
IMA tracks the number of struct files which are holding a given inode
readonly and the number which are holding the inode write or r/w. It
needs this information so when a new reader or writer comes in it can
tell if this new file will be able to invalidate results it already made
about existing files.
aka if a task is holding a struct file open RO, IMA measured the file
and recorded those measurements and then a task opens the file RW IMA
needs to note in the logs that the old measurement may not be correct.
It's called a "Time of Measure Time of Use" (ToMToU) issue. The same is
true is a RO file is opened to an inode which has an open writer. We
cannot, with any validity, measure the file in question since it could
be changing.
This patch attempts to use the i_writecount field to track writers. The
i_writecount field actually embeds more information in it's value than
IMA needs but it should work for our purposes and allow us to shrink the
struct inode even more.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:45 +0000 (14:41 -0400)]
IMA: use inode->i_lock to protect read and write counters
Currently IMA used the iint->mutex to protect the i_readcount and
i_writecount. This patch uses the inode->i_lock since we are going to
start using in inode objects and that is the most appropriate lock.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:39 +0000 (14:41 -0400)]
IMA: convert internal flags from long to char
The IMA flags is an unsigned long but there is only 1 flag defined.
Lets save a little space and make it a char. This packs nicely next to
the array of u8's.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:32 +0000 (14:41 -0400)]
IMA: use unsigned int instead of long for counters
Currently IMA uses 2 longs in struct inode. To save space (and as it
seems impossible to overflow 32 bits) we switch these to unsigned int.
The switch to unsigned does require slightly different checks for
underflow, but it isn't complex.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:26 +0000 (14:41 -0400)]
IMA: drop the inode opencount since it isn't needed for operation
The opencount was used to help debugging to make sure that everything
which created a struct file also correctly made the IMA calls. Since we
moved all of that into the VFS this isn't as necessary. We should be
able to get the same amount of debugging out of just the reader and
write count.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Paris [Mon, 25 Oct 2010 18:41:18 +0000 (14:41 -0400)]
IMA: use rbtree instead of radix tree for inode information cache
The IMA code needs to store the number of tasks which have an open fd
granting permission to write a file even when IMA is not in use. It
needs this information in order to be enabled at a later point in time
without losing it's integrity garantees.
At the moment that means we store a little bit of data about every inode
in a cache. We use a radix tree key'd on the inode's memory address.
Dave Chinner pointed out that a radix tree is a terrible data structure
for such a sparse key space. This patch switches to using an rbtree
which should be more efficient.
Bug report from Dave:
"I just noticed that slabtop was reporting an awfully high usage of
radix tree nodes:
OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME
4200331 2778082 66% 0.55K 144839 29 2317424K radix_tree_node
2321500 2060290 88% 1.00K 72581 32 2322592K xfs_inode
2235648 2069791 92% 0.12K 69864 32 279456K iint_cache
That is, 2.7M radix tree nodes are allocated, and the cache itself is
consuming 2.3GB of RAM. I know that the XFS inodei caches are indexed
by radix tree node, but for 2 million cached inodes that would mean a
density of 1 inode per radix tree node, which for a system with 16M
inodes in the filsystems is an impossibly low density. The worst I've
seen in a production system like kernel.org is about 20-25% density,
which would mean about 150-200k radix tree nodes for that many inodes.
So it's not the inode cache.
So I looked up what the iint_cache was. It appears to used for
storing per-inode IMA information, and uses a radix tree for indexing.
It uses the *address* of the struct inode as the indexing key. That
means the key space is extremely sparse - for XFS the struct inode
addresses are approximately 1000 bytes apart, which means the closest
the radix tree index keys get is ~1000. Which means that there is a
single entry per radix tree leaf node, so the radix tree is using
roughly 550 bytes for every 120byte structure being cached. For the
above example, it's probably wasting close to 1GB of RAM...."
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 26 Oct 2010 17:14:23 +0000 (10:14 -0700)]
Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
power_supply: Makefile cleanup
bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
power_supply: Introduce maximum current property
power_supply: Add types for USB chargers
ds2782_battery: Fix units
power_supply: Add driver for TWL4030/TPS65950 BCI charger
bq20z75: Add support for more power supply properties
wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
olpc_battery: Fix endian neutral breakage for s16 values
ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
pcf50633-charger: Add missing sysfs_remove_group()
power_supply: Add driver for TI BQ20Z75 gas gauge IC
wm831x_power: Remove duplicate chg mask
omap: rx51: Add support for USB chargers
power_supply: Add isp1704 charger detection driver
Linus Torvalds [Tue, 26 Oct 2010 17:13:48 +0000 (10:13 -0700)]
Merge branch 'linux_next' of git://git./linux/kernel/git/mchehab/i7core
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (34 commits)
i7core_edac: return -ENODEV when devices were already probed
i7core_edac: properly terminate pci_dev_table
i7core_edac: Avoid PCI refcount to reach zero on successive load/reload
i7core_edac: Fix refcount error at PCI devices
i7core_edac: it is safe to i7core_unregister_mci() when mci=NULL
i7core_edac: Fix an oops at i7core probe
i7core_edac: Remove unused member channels in i7core_pvt
i7core_edac: Remove unused arg csrow from get_dimm_config
i7core_edac: Reduce args of i7core_register_mci
i7core_edac: Introduce i7core_unregister_mci
i7core_edac: Use saved pointers
i7core_edac: Check probe counter in i7core_remove
i7core_edac: Call pci_dev_put() when alloc_i7core_dev() failed
i7core_edac: Fix error path of i7core_register_mci
i7core_edac: Fix order of lines in i7core_register_mci
i7core_edac: Always do get/put for all devices
i7core_edac: Introduce i7core_pci_ctl_create/release
i7core_edac: Introduce free_i7core_dev
i7core_edac: Introduce alloc_i7core_dev
i7core_edac: Reduce args of i7core_get_onedevice
...
Linus Torvalds [Tue, 26 Oct 2010 17:13:10 +0000 (10:13 -0700)]
Merge branch 'hwpoison' of git://git./linux/kernel/git/ak/linux-mce-2.6
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (22 commits)
Add _addr_lsb field to ia64 siginfo
Fix migration.c compilation on s390
HWPOISON: Remove retry loop for try_to_unmap
HWPOISON: Turn addr_valid from bitfield into char
HWPOISON: Disable DEBUG by default
HWPOISON: Convert pr_debugs to pr_info
HWPOISON: Improve comments in memory-failure.c
x86: HWPOISON: Report correct address granuality for huge hwpoison faults
Encode huge page size for VM_FAULT_HWPOISON errors
Fix build error with !CONFIG_MIGRATION
hugepage: move is_hugepage_on_freelist inside ifdef to avoid warning
Clean up __page_set_anon_rmap
HWPOISON, hugetlb: fix unpoison for hugepage
HWPOISON, hugetlb: soft offlining for hugepage
HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED
hugetlb: move refcounting in hugepage allocation inside hugetlb_lock
HWPOISON, hugetlb: add free check to dequeue_hwpoison_huge_page()
hugetlb: hugepage migration core
hugetlb: redefine hugepage copy functions
hugetlb: add allocate function for hugepage migration
...
Linus Torvalds [Tue, 26 Oct 2010 17:03:40 +0000 (10:03 -0700)]
Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
AT91: pm: make sure that r0 is 0 when dealing with cache operations
AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
AT91: reset: extend alternate reset procedure to several chips
AT91: reset routine cleanup, remove not needed icache flush
AT91: trivial: align comment of at91sam9g20_reset with one more tab
AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
AT91: add board support for Pcontrol_G20
Linus Torvalds [Tue, 26 Oct 2010 17:02:39 +0000 (10:02 -0700)]
Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
OMAP: DSS2: don't power off a panel twice
OMAP: DSS2: OMAPFB: Allow usage of def_vrfb only for omap2,3
OMAP: DSS2: OMAPFB: make VRFB depends on OMAP2,3
OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB
arm/omap: simplify conditional
OMAP: DSS2: DSI: Remove extra iounmap in error path
OMAP: DSS2: Use dss_features framework on DSS2 code
OMAP: DSS2: Introduce dss_features files
video/omap: remove mux.h include
ARM: omap/fb: move get_fbmem_region() to .init.text
ARM: omap/fb: move omapfb_reserve_sram to .init.text
ARM: omap/fb: move omap_init_fb to .init.text
OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync
OMAP: DSS2: make filter coefficient tables human readable
OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel
Linus Torvalds [Tue, 26 Oct 2010 17:00:04 +0000 (10:00 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ]: x86, cpufreq: Mark longrun_get_policy with __cpuinit.
[CPUFREQ] add sampling_down_factor tunable to improve ondemand performance
[CPUFREQ] arch/x86/kernel/cpu/cpufreq: Fix unsigned return type
[CPUFREQ] drivers/cpufreq: Adjust confusing if indentation
Linus Torvalds [Tue, 26 Oct 2010 16:55:25 +0000 (09:55 -0700)]
Merge branch 'for-2.6.37' of git://linux-nfs.org/~bfields/linux
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
svcrpc: assume svc_delete_xprt() called only once
svcrpc: never clear XPT_BUSY on dead xprt
nfsd4: fix connection allocation in sequence()
nfsd4: only require krb5 principal for NFSv4.0 callbacks
nfsd4: move minorversion to client
nfsd4: delay session removal till free_client
nfsd4: separate callback change and callback probe
nfsd4: callback program number is per-session
nfsd4: track backchannel connections
nfsd4: confirm only on succesful create_session
nfsd4: make backchannel sequence number per-session
nfsd4: use client pointer to backchannel session
nfsd4: move callback setup into session init code
nfsd4: don't cache seq_misordered replies
SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
SUNRPC: Use conventional switch statement when reclassifying sockets
sunrpc/xprtrdma: clean up workqueue usage
sunrpc: Turn list_for_each-s into the ..._entry-s
...
Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
Linus Torvalds [Tue, 26 Oct 2010 16:52:09 +0000 (09:52 -0700)]
Merge branch 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
net/sunrpc: Use static const char arrays
nfs4: fix channel attribute sanity-checks
NFSv4.1: Use more sensible names for 'initialize_mountpoint'
NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
NFS: client needs to maintain list of inodes with active layouts
NFS: create and destroy inode's layout cache
NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
NFSv4.1: pnfs: full mount/umount infrastructure
NFS: set layout driver
NFS: ask for layouttypes during v4 fsinfo call
NFS: change stateid to be a union
NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
SUNRPC: define xdr_decode_opaque_fixed
NFSD: remove duplicate NFS4_STATEID_SIZE
Nicolas Ferre [Fri, 22 Oct 2010 17:12:52 +0000 (19:12 +0200)]
AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
Enable built-in RTC IP in Kconfig and modify comments and help messages.
RTT as RTC is still available but should not be selected in common case.
Reported-by: Yegor Yefremov <yegor_sub1@visionsystems.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Fri, 22 Oct 2010 16:27:48 +0000 (18:27 +0200)]
at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Fri, 22 Oct 2010 16:55:39 +0000 (18:55 +0200)]
AT91: pm: make sure that r0 is 0 when dealing with cache operations
When using CP15 cache operations (c7), we make sure that Rd (r0)
is actually 0 as ARM 926 TRM is saying.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Fri, 22 Oct 2010 15:53:39 +0000 (17:53 +0200)]
AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
For power management at91_pm_enter() routine, use the cpu_do_idle() for a
rock solid "wait for interrupt" implementation.
For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as
we can access RAM even while in self-refresh mode.
We keep plain access to CP15 for at91rm9200 as this feature is not
available: instructions have to be in a single cache line.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 14 Oct 2010 17:14:00 +0000 (19:14 +0200)]
AT91: reset: extend alternate reset procedure to several chips
Several at91sam9 chips need the alternate reset procedure to be sure to halt
SDRAM smoothly before resetting the chip.
This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips
affected.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 14 Oct 2010 15:19:11 +0000 (17:19 +0200)]
AT91: reset routine cleanup, remove not needed icache flush
Generalize assembler reset routine to allow use on several at91sam9 chips.
This patch replace double definitions of SDRAM controller registers and RSTC
registers with use of classical header files.
For this rework, we remove the not needed icache flush as it is already
done in the calling function: arm_machine_restart().
Rename at91sam9g20_reset.S to generalize to several chips.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Nicolas Ferre [Thu, 14 Oct 2010 14:51:36 +0000 (16:51 +0200)]
AT91: trivial: align comment of at91sam9g20_reset with one more tab
Preparing next patch with longer names
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Peter Horton [Fri, 28 May 2010 15:37:26 +0000 (16:37 +0100)]
AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.
Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Peter Gsellmann [Wed, 13 Oct 2010 14:18:51 +0000 (16:18 +0200)]
AT91: add board support for Pcontrol_G20
Board is a carrier board for Stamp9G20, with additional peripherals
for a building automation system
Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at>
[nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Joe Perches [Mon, 13 Sep 2010 19:48:01 +0000 (12:48 -0700)]
net/sunrpc: Use static const char arrays
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
J. Bruce Fields [Sat, 2 Oct 2010 19:19:01 +0000 (15:19 -0400)]
nfs4: fix channel attribute sanity-checks
The sanity checks here are incorrect; in the worst case they allow
values that crash the client.
They're also over-reliant on the preprocessor.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Linus Torvalds [Tue, 26 Oct 2010 01:42:06 +0000 (18:42 -0700)]
Merge branch 'for-next' of git://android.git./kernel/tegra
* 'for-next' of git://android.git.kernel.org/kernel/tegra:
spi: tegra: fix error setting on timeout
spi: add spi_tegra driver
tegra: harmony: enable PCI Express
tegra: add PCI Express support
tegra: add PCI Express clocks
[ARM] tegra: Add APB DMA support
[ARM] tegra: Add cpufreq support
[ARM] tegra: common: Update common clock init table
[ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups
[ARM] tegra: Add support for reading fuses
[ARM] tegra: gpio: Add suspend and wake support
[ARM] tegra: pinmux: add safe values, move tegra2, add suspend
[ARM] tegra: add suspend and mirror irqs to legacy controller
[ARM] tegra: Add legacy irq support
[ARM] tegra: update iomap
Linus Torvalds [Tue, 26 Oct 2010 01:41:32 +0000 (18:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
Blackfin: fix inverted anomaly
05000481 logic
Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK
Blackfin: ppi/spi/twi headers: add missing __BFP undef
Blackfin: update defconfigs
Blackfin: bfin_twi.h: start a common TWI header
netdev: bfin_mac: push settings to platform resources
Erik Gilling [Thu, 9 Sep 2010 01:16:45 +0000 (18:16 -0700)]
spi: tegra: fix error setting on timeout
avoids derefencing an uninitialized pointer
Change-Id: Icf528441ae481e9f6f5ddc0be32c7c217fa49701
Signed-off-by: Erik Gilling <konkers@android.com>
Linus Torvalds [Mon, 25 Oct 2010 23:53:11 +0000 (16:53 -0700)]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: (42 commits)
microblaze: Fix build with make 3.82
fbdev/xilinxfb: Microblaze driver support
microblaze: Support C optimized lib functions for little-endian
microblaze: Separate library optimized functions
microblaze: Support timer on AXI lite
microblaze: Add support for little-endian Microblaze
microblaze: KGDB little endian support
microblaze: Add PVR for endians plus detection
net: emaclite: Add support for little-endian platforms
microblaze: trivial: Add comment for AXI pvr
microblaze: pci-common cleanup
microblaze: Support early console on uart16550
microblaze: Do not compile early console support for uartlite if is disabled
microblaze: Setup early console dynamically
microblaze: Rename all uartlite early printk functions
microblaze: remove early printk uarlite console dependency from header
microblaze: Remove additional compatible properties
microblaze: Remove hardcoded asm instraction for PVR loading
microblaze: Use static const char * const where possible
microblaze: Define VMALLOC_START/END
...
Linus Torvalds [Mon, 25 Oct 2010 23:25:31 +0000 (16:25 -0700)]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
hwmon: lis3: Release resources in case of failure
hwmon: lis3: Short explanations of platform data fields
hwmon: lis3: Enhance lis3 selftest with IRQ line test
hwmon: lis3: use block read to access data registers
hwmon: lis3: Adjust fuzziness for 8 bit device
hwmon: lis3: New parameters to platform data
hwmon: lis3: restore axis enabled bits
hwmon: lis3: Power on corrections
hwmon: lis3: Update coordinates at polled device open
hwmon: lis3: Cleanup interrupt handling
hwmon: lis3: regulator control
hwmon: lis3: pm_runtime support
Kirkwood: add fan support for Network Space Max v2
hwmon: add generic GPIO fan driver
hwmon: (coretemp) fix reading of microcode revision (v2)
hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefs
hwmon: (pkgtemp) align driver initialization style with coretemp
hwmon: LTC4261 Hardware monitoring driver
hwmon: (lis3) add axes module parameter for custom axis-mapping
hwmon: (hp_accel) Add HP Mini 510x family support
...
David Howells [Mon, 25 Oct 2010 22:41:11 +0000 (23:41 +0100)]
MN10300: Fix the PERCPU() alignment to allow for workqueues
In the MN10300 arch, we occasionally see an assertion being tripped in
alloc_cwqs() at the following line:
/* just in case, make sure it's actually aligned */
---> BUG_ON(!IS_ALIGNED(wq->cpu_wq.v, align));
return wq->cpu_wq.v ? 0 : -ENOMEM;
The values are:
wa->cpu_wq.v => 0x902776e0
align => 0x100
and align is calculated by the following:
const size_t align = max_t(size_t, 1 << WORK_STRUCT_FLAG_BITS,
__alignof__(unsigned long long));
This is because the pointer in question (wq->cpu_wq.v) loses some of its
lower bits to control flags, and so the object it points to must be
sufficiently aligned to avoid the need to use those bits for pointing to
things.
Currently, 4 control bits and 4 colour bits are used in normal
circumstances, plus a debugging bit if debugging is set. This requires
the cpu_workqueue_struct struct to be at least 256 bytes aligned (or 512
bytes aligned with debugging).
PERCPU() alignment on MN13000, however, is only 32 bytes as set in
vmlinux.lds.S. So we set this to PAGE_SIZE (4096) to match most other
arches and stick a comment in alloc_cwqs() for anyone else who triggers
the assertion.
Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Salter <msalter@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
J. Bruce Fields [Sat, 23 Oct 2010 15:55:53 +0000 (11:55 -0400)]
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
The only caller (svc_send) has already checked XPT_DEAD.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields [Sat, 23 Oct 2010 15:23:46 +0000 (11:23 -0400)]
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
If any xprt marked DEAD is also left BUSY for the rest of its life, then
the XPT_DEAD check here is superfluous--we'll get the same result from
the XPT_BUSY check just after.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields [Sat, 23 Oct 2010 15:16:10 +0000 (11:16 -0400)]
svcrpc: assume svc_delete_xprt() called only once
As long as DEAD exports are left BUSY, and svc_delete_xprt is called
only with BUSY held, then svc_delete_xprt() will never be called on an
xprt that is already DEAD.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields [Sat, 23 Oct 2010 15:04:12 +0000 (11:04 -0400)]
svcrpc: never clear XPT_BUSY on dead xprt
Once an xprt has been deleted, there's no reason to allow it to be
enqueued--at worst, that might cause the xprt to be re-added to some
global list, resulting in later corruption.
Also, note this leaves us with no need for the reference-count
manipulation here.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:34 +0000 (07:57 -0400)]
hwmon: lis3: Release resources in case of failure
If lis3lv02d_init_device fails, HW resources were not released
properly. In case of failure call release_resources if available.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Mike Frysinger [Mon, 25 Oct 2010 08:49:49 +0000 (04:49 -0400)]
Blackfin: fix inverted anomaly
05000481 logic
No one uses these MMRs so we didn't notice when the anomaly handling
logic was inverted.
Reported-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 25 Oct 2010 21:22:49 +0000 (17:22 -0400)]
Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECK
This code was useful during early port development when our icache code
wasn't solid, but that ship has sailed long ago, and no code calls this
function anymore (irq_panic). So punt it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Samu Onkalo [Sat, 23 Oct 2010 13:39:44 +0000 (09:39 -0400)]
hwmon: lis3: Short explanations of platform data fields
Short documentation at kernel doc format.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:32 +0000 (07:57 -0400)]
hwmon: lis3: Enhance lis3 selftest with IRQ line test
Configure chip to data ready mode in selftest and count received
interrupts to see that interrupt line(s) are working.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:31 +0000 (07:57 -0400)]
hwmon: lis3: use block read to access data registers
Add optional blockread function to interface driver. If available
the chip driver uses it for data register access. For 12 bit device
it reads 6 bytes to get 3*16bit data. For 8 bit device it reads out
5 bytes since every second byte is dummy.
This optimizes bus usage and reduces number of operations and
interrupts needed for one data update.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:30 +0000 (07:57 -0400)]
hwmon: lis3: Adjust fuzziness for 8 bit device
Default fuziness is set smaller for 8 device.
In 12 bit device LSB is quite close to 1 mg
(mg = 1 / 1000 of earth gravity).
In 8bit device LSB is about 18 mg.
Set fuziness to 1 for 8 bit device.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:29 +0000 (07:57 -0400)]
hwmon: lis3: New parameters to platform data
Added default output data rate setting to platform data.
If default rate is 0, reset default value is used.
Added control for duration via platform data.
Added possibility to configure interrupts to trig on
both rising and falling edge. The lis3 WU unit can be
configured quite many ways and with some configurations it
is quite handy to get coordinate refresh when some
event trigs and when it reason goes away.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:28 +0000 (07:57 -0400)]
hwmon: lis3: restore axis enabled bits
All axis enable bits are set to 0 at module remove.
Restore reset default value at init.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:27 +0000 (07:57 -0400)]
hwmon: lis3: Power on corrections
Sometimes lis3 chip seems to fail to setup factory tuning at boot up.
This probably happens if there is some odd power ramp down ramp up sequence
for example in device restart. Set boot bit in control2 register to
trig boot sequence manually and wait until it is finished.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:26 +0000 (07:57 -0400)]
hwmon: lis3: Update coordinates at polled device open
Call input device poll function at device open to refresh coordinates
immediately. This is needed for the case where poll interval is set to
zero and coordinate updates happens purely under interrupt control.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:25 +0000 (07:57 -0400)]
hwmon: lis3: Cleanup interrupt handling
Irqcfg moved to chip data instead of platform data.
This simplifies access in interrupt handler little bit.
Input device open and close functions set status for
interrupt threaded handler once.
Unnecessary check for interrupt source removed since
it is enough that active interrupt line indicates that
there was an interrupt.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:24 +0000 (07:57 -0400)]
hwmon: lis3: regulator control
Based on pm_runtime control, turn lis3 regulators on and off.
Perform context save and restore on transitions.
Feature is optional and must be enabled in platform data.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Samu Onkalo [Fri, 22 Oct 2010 11:57:23 +0000 (07:57 -0400)]
hwmon: lis3: pm_runtime support
Add pm_runtime support to lis3 core driver.
Add pm_runtime support to lis3 i2c driver.
spi and hp_accel drivers are not yet supported. Old always
on functionality remains for those.
For sysfs there is 5 second delay before turning off the
chip to avoid long ramp up delay.
Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Simon Guinot [Fri, 22 Oct 2010 09:29:18 +0000 (05:29 -0400)]
Kirkwood: add fan support for Network Space Max v2
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Simon Guinot [Thu, 21 Oct 2010 22:44:19 +0000 (00:44 +0200)]
hwmon: add generic GPIO fan driver
This patch adds hwmon support for fans connected to GPIO lines.
Platform specific information such as GPIO pinout and speed conversion array
(rpm from/to GPIO value) are passed to the driver via platform_data.
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Fri, 8 Oct 2010 08:59:38 +0000 (04:59 -0400)]
hwmon: (coretemp) fix reading of microcode revision (v2)
According to the documentation, simply reading the respective MSR
isn't sufficient: It should be written with zeros, cpuid(1) be
executed, and then read (see arch/x86/kernel/cpu/intel.c for an
example).
v2: Fail probe when microcode revision cannot be determined, but is
needed to check for proper operation.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Jean Delvare <khali@linux-fr.org>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Chen Gong [Sat, 9 Oct 2010 02:01:48 +0000 (22:01 -0400)]
hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefs
CONFIG_HOTPLUG_CPU is used too much in some drivers.
This patch clean them up.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Chen Gong [Fri, 8 Oct 2010 05:53:35 +0000 (05:53 +0000)]
hwmon: (pkgtemp) align driver initialization style with coretemp
pkgtemp is derived from coretemp, so some reasonable
logics should be applied onto pkgtemp, too. Such as
the init logic here.
Signed-off-by: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Guenter Roeck [Fri, 25 Jun 2010 18:59:54 +0000 (11:59 -0700)]
hwmon: LTC4261 Hardware monitoring driver
This driver adds support for Linear Technology LTC4261 I2C Negative
Voltage Hot Swap Controller.
Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Takashi Iwai [Fri, 1 Oct 2010 21:14:25 +0000 (17:14 -0400)]
hwmon: (lis3) add axes module parameter for custom axis-mapping
The axis-mapping of lis3dev device on many (rather most) HP machines
doesn't follow the standard. When each new model appears, users need to
adjust again. Testing this requires the rebuild of kernel, thus it's not
trivial for end-users.
This patch adds a module parameter "axes" to allow a custom axis-mapping
without patching and recompiling the kernel driver. User can pass the
parameter such as axes=3,2,1. Also it can be changed via sysfs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Masanari Iida [Fri, 27 Aug 2010 00:21:43 +0000 (00:21 +0000)]
hwmon: (hp_accel) Add HP Mini 510x family support
This patch is an enhanced version of Takashi Iwai's
[PATCH] hp_accel: Add quirks for HP ProBook 532x and HP Mini 5102
My HP Mini 5101 works fine with this patch.
Confirmed with Tux Racer.
Signed-off by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Takashi Iwai [Thu, 23 Sep 2010 17:01:39 +0000 (10:01 -0700)]
hwmon: (lis3) Add support for new LIS3DC / HP3DC chip
A new version of LIS3 chip has slight incompatibilities from former
versions. This patch adds the minimal support for it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Mon, 13 Sep 2010 10:32:08 +0000 (10:32 +0000)]
x86/hwmon: remove inclusion of unnecessary headers from {core, pkg, via-cpu}temp.c
These likely originate from these drivers being clones of one another
and/or other drivers which actually needed these includes.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Mon, 13 Sep 2010 10:28:35 +0000 (10:28 +0000)]
x86/hwmon: (coretemp) cosmetic cleanup
"break" after "return" is at best bogus (good compilers even warn about
the "break" being unreachable).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Jan Beulich [Fri, 24 Sep 2010 05:31:10 +0000 (22:31 -0700)]
x86/hwmon: {core, pkg, via}cpu_temp_device_remove() can all be __cpuinit
... as they're being called only from a __cpuinit function.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Linus Torvalds [Mon, 25 Oct 2010 20:48:29 +0000 (13:48 -0700)]
Merge branch 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
Linus Torvalds [Mon, 25 Oct 2010 20:46:56 +0000 (13:46 -0700)]
Merge branch 'omap-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
omap: complete removal of machine_desc.io_pg_offst and .phys_io
omap: UART: fix wakeup registers for OMAP24xx UART2
omap: Fix spotty MMC voltages
ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
serial: omap-serial: fix signess error
OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
omap: dma: Fix buffering disable bit setting for omap24xx
omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
OMAP3: PM: fix scratchpad memory accesses for off-mode
omap4: pandaboard: enable the ehci port on pandaboard
omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
omap4: pandaboard: remove unused hsmmc definition
OMAP: McBSP: Remove null omap44xx ops comment
OMAP: McBSP: Swap CLKS source definition
OMAP: McBSP: Fix CLKR and FSR signal muxing
OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
OMAP: control: move plat-omap/control.h to mach-omap2/control.h
OMAP: split plat-omap/common.c
OMAP: McBSP: implement functional clock switching via clock framework
OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
...
Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
Linus Torvalds [Mon, 25 Oct 2010 17:59:31 +0000 (10:59 -0700)]
Merge branch 'davinci-for-linus' of git://git./linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits)
davinci: fix remaining board support after io_pgoffst removal
davinci: mityomapl138: make file local data static
arm/davinci: remove duplicated include
davinci: Initial support for Omapl138-Hawkboard
davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom
davinci: add tnetv107x touchscreen platform device
input: add driver for tnetv107x touchscreen controller
davinci: add keypad config for tnetv107x evm board
davinci: add tnetv107x keypad platform device
input: add driver for tnetv107x on-chip keypad controller
net: davinci_emac: cleanup unused cpdma code
net: davinci_emac: switch to new cpdma layer
net: davinci_emac: separate out cpdma code
net: davinci_emac: cleanup unused mdio emac code
omap: cleanup unused davinci mdio arch code
davinci: cleanup mdio arch code and switch to phy_id
net: davinci_emac: switch to new mdio
omap: add mdio platform devices
davinci: add mdio platform devices
net: davinci_emac: separate out davinci mdio
...
Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries
added next to each other - one from the davinci merge, one from the
input merge)
Linus Torvalds [Mon, 25 Oct 2010 17:08:21 +0000 (10:08 -0700)]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
exofs: Remove inode->i_count manipulation in exofs_new_inode
fs/exofs: typo fix of faild to failed
exofs: Set i_mapping->backing_dev_info anyway
exofs: Cleaup read path in regard with read_for_write
Borislav Petkov [Mon, 25 Oct 2010 16:15:22 +0000 (18:15 +0200)]
x86-32, mm: Remove duplicated include
Commit
b40827fa7268 ("x86-32, mm: Add an initial page table for core
bootstrapping") added an include directive which is needless and is
taken care of by a previous one. Remove it.
Caught-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boaz Harrosh [Sat, 16 Oct 2010 08:14:01 +0000 (19:14 +1100)]
exofs: Remove inode->i_count manipulation in exofs_new_inode
exofs_new_inode() was incrementing the inode->i_count and
decrementing it in create_done(), in a bad attempt to make sure
the inode will still be there when the asynchronous create_done()
finally arrives. This was very stupid because iput() was not called,
and if it was actually needed, it would leak the inode.
However all this is not needed, because at exofs_evict_inode()
we already wait for create_done() by waiting for the
object_created event. Therefore remove the superfluous ref counting
and just Thicken the comment at exofs_evict_inode() a bit.
While at it change places that open coded wait_obj_created()
to call the already available wrapper.
CC: Dave Chinner <dchinner@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Joe Perches [Fri, 22 Oct 2010 05:17:17 +0000 (22:17 -0700)]
fs/exofs: typo fix of faild to failed
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Linus Torvalds [Mon, 25 Oct 2010 15:36:50 +0000 (08:36 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (48 commits)
[S390] topology: export cpu topology via proc/sysinfo
[S390] topology: move topology sysinfo code
[S390] topology: clean up facility detection
[S390] cleanup facility list handling
[S390] enable ARCH_DMA_ADDR_T_64BIT with 64BIT
[S390] dasd: ignore unsolicited interrupts for DIAG
[S390] kvm: Enable z196 instruction facilities
[S390] dasd: fix unsolicited interrupt recognition
[S390] dasd: fix use after free in dbf
[S390] kvm: Fix badness at include/asm/mmu_context.h:83
[S390] cio: fix I/O cancel function
[S390] topology: change default
[S390] smp: use correct cpu address in print_cpu_info()
[S390] remove ieee_instruction_pointer from thread_struct
[S390] cleanup system call parameter setup
[S390] correct alignment of cpuid structure
[S390] cleanup lowcore access from external interrupts
[S390] cleanup lowcore access from program checks
[S390] pgtable: move pte_mkhuge() from hugetlb.h to pgtable.h
[S390] fix SIGBUS handling
...
Linus Torvalds [Mon, 25 Oct 2010 15:32:05 +0000 (08:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits)
ALSA: hda - Disable sticky PCM stream assignment for AD codecs
ALSA: usb - Creative USB X-Fi volume knob support
ALSA: ca0106: Use card specific dac id for mute controls.
ALSA: ca0106: Allow different sound cards to use different SPI channel mappings.
ALSA: ca0106: Create a nice spot for mapping channels to dacs.
ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence.
ALSA: ca0106: Pull out dac powering routine into separate function.
ALSA: ca0106 - add Sound Blaster 5.1vx info.
ASoC: tlv320dac33: Use usleep_range for delays
ALSA: usb-audio: add Novation Launchpad support
ALSA: hda - Add workarounds for CT-IBG controllers
ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs
ASoC: tpa6130a2: Error handling for broken chip
ASoC: max98088: Staticise m98088_eq_band
ASoC: soc-core: Fix codec->name memory leak
ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066
ALSA: hda - Add some workarounds for Creative IBG
ALSA: hda - Fix wrong SPDIF NID assignment for CA0110
ALSA: hda - Fix codec rename rules for ALC662-compatible codecs
ALSA: hda - Add alc_init_jacks() call to other codecs
...
Linus Torvalds [Mon, 25 Oct 2010 15:30:48 +0000 (08:30 -0700)]
Merge branch 'for-upstream' of git://git./linux/kernel/git/dvrabel/uwb
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb:
uwb: Orphan the UWB and WUSB subsystems
uwb: Remove the WLP subsystem and drivers
Linus Torvalds [Mon, 25 Oct 2010 15:28:13 +0000 (08:28 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits)
eeepc-wmi: Add cpufv sysfs interface
eeepc-wmi: add additional hotkeys
panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata
panasonic-laptop: Handle errors properly if they happen
intel_pmic_gpio: fix off-by-one value range checking
IBM Real-Time "SMI Free" mode driver -v7
Add OLPC XO-1 rfkill driver
Move hdaps driver to platform/x86
ideapad-laptop: Fix Makefile
intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register
ideapad: Add param: no_bt_rfkill
ideapad: Change the driver name to ideapad-laptop
ideapad: rewrite the sw rfkill set
ideapad: rewrite the hw rfkill notify
ideapad: use EC command to control camera
ideapad: use return value of _CFG to tell if device exist or not
ideapad: make sure we bind on the correct device
ideapad: check VPC bit before sync rfkill hw status
ideapad: add ACPI helpers
dell-laptop: Add debugfs support
...
Linus Torvalds [Mon, 25 Oct 2010 15:19:14 +0000 (08:19 -0700)]
Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6:
mtd/m25p80: add support to parse the partitions by OF node
of/irq: of_irq.c needs to include linux/irq.h
of/mips: Cleanup some include directives/files.
of/mips: Add device tree support to MIPS
of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch
of/device: Rework to use common platform_device_alloc() for allocating devices
of/xsysace: Fix OF probing on little-endian systems
of: use __be32 types for big-endian device tree data
of/irq: remove references to NO_IRQ in drivers/of/platform.c
of/promtree: add package-to-path support to pdt
of/promtree: add of_pdt namespace to pdt code
of/promtree: no longer call prom_ functions directly; use an ops structure
of/promtree: make drivers/of/pdt.c no longer sparc-only
sparc: break out some PROM device-tree building code out into drivers/of
of/sparc: convert various prom_* functions to use phandle
sparc: stop exporting openprom.h header
powerpc, of_serial: Endianness issues setting up the serial ports
of: MTD: Fix OF probing on little-endian systems
of: GPIO: Fix OF probing on little-endian systems
Ralf Baechle [Sun, 24 Oct 2010 21:23:50 +0000 (22:23 +0100)]
MIPS: MT: Fix build error iFPU affinity code
Commit
b0ae19811375 ("security: remove unused parameter from
security_task_setscheduler()") broke the build of
arch/mips/kernel/mips-mt-fpaff.c. The function arguments were
unnecessary, not the semicolon ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 25 Oct 2010 15:05:29 +0000 (08:05 -0700)]
Merge branch 'ieee1394-removal' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
ieee1394: remove the old IEEE 1394 driver stack
ieee1394: move init_ohci1394_dma to drivers/firewire/
Fix trivial change/delete conflict: drivers/ieee1394/eth1394.c is
getting removed, but was modified by the networking merge.
Yoshihisa Abe [Mon, 25 Oct 2010 06:03:46 +0000 (02:03 -0400)]
Coda: replace BKL with mutex
Replace the BKL with a mutex to protect the venus_comm structure which
binds the mountpoint with the character device and holds the upcall
queues.
Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoshihisa Abe [Mon, 25 Oct 2010 06:03:45 +0000 (02:03 -0400)]
Coda: push BKL regions into coda_upcall()
Now that shared inode state is locked using the cii->c_lock, the BKL is
only used to protect the upcall queues used to communicate with the
userspace cache manager. The remaining state is all local and we can
push the lock further down into coda_upcall().
Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yoshihisa Abe [Mon, 25 Oct 2010 06:03:44 +0000 (02:03 -0400)]
Coda: add spin lock to protect accesses to struct coda_inode_info.
We mostly need it to protect cached user permissions. The c_flags field
is advisory, reading the wrong value is harmless and in the worst case
we hit a slow path where we have to make an extra upcall to the
userspace cache manager when revalidating a dentry or inode.
Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 25 Oct 2010 14:59:01 +0000 (07:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
Input: wacom - specify Cinitq supported tools
Input: ab8500-ponkey - fix IRQ freeing in error path
Input: adp5588-keys - use more obvious i2c_device_id name string
Input: ad7877 - switch to using threaded IRQ
Input: ad7877 - use attribute group to control visibility of attributes
Input: serio - add support for PS2Mult multiplexer protocol
Input: wacom - properly enable runtime PM
Input: ad7877 - filter events where pressure is beyond the maximum
Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
Input: ad7877 - implement specified chip select behavior
Input: hp680_ts_input - use cancel_delayed_work_sync()
Input: mousedev - correct lockdep annotation
Input: ads7846 - switch to using threaded IRQ
Input: serio - support multiple child devices per single parent
Input: synaptics - simplify pass-through port handling
Input: add ROHM BU21013 touch panel controller support
Input: omap4-keypad - wake-up on events & long presses
Input: omap4-keypad - fix interrupt line configuration
Input: omap4-keypad - SYSCONFIG register configuration
Input: omap4-keypad - use platform device helpers
...
Linus Torvalds [Mon, 25 Oct 2010 14:51:49 +0000 (07:51 -0700)]
Merge git://git./linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits)
sh: i2c-sh7760: Replase from ctrl_* to __raw_*
sh: clkfwk: Shuffle around to match the intc split up.
sh: clkfwk: modify for_each_frequency end condition
sh: fix clk_get() error handling
sh: clkfwk: Fix fault in frequency iterator.
sh: clkfwk: Add a helper for rate rounding by divisor ranges.
sh: clkfwk: Abstract rate rounding helper.
sh: clkfwk: support clock remapping.
sh: pci: Convert to upper/lower_32_bits() helpers.
sh: mach-sdk7786: Add support for the FPGA SRAM.
sh: Provide a generic SRAM pool for tiny memories.
sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
sh: pci: Support slot 4 routing on SDK7786.
sh: Fix up PMB locking.
sh: mach-sdk7786: Add support for fpga gpios.
sh: use pr_fmt for clock framework, too.
sh: remove name and id from struct clk
sh: free-without-alloc fix for sh_mobile_lcdcfb
sh: perf: Set up perf_max_events.
sh: perf: Support SH-X3 hardware counters.
...
Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
Linus Torvalds [Mon, 25 Oct 2010 14:45:10 +0000 (07:45 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
Revert "block: fix accounting bug on cross partition merges"
Linus Torvalds [Mon, 25 Oct 2010 14:44:27 +0000 (07:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits)
m68knommu: convert to using tracehook_report_syscall_*
m68knommu: some boards use fixed phy for FEC ethernet
m68knommu: support the external GPIO based interrupts of the 5272
m68knommu: mask of vector bits in exception word properly
m68knommu: change to new flag variables
m68knommu: Fix MCFUART_TXFIFOSIZE for m548x.
m68knommu: add basic mmu-less m548x support
m68knommu: .gitignore vmlinux.lds
m68knommu: stop using __do_IRQ
m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC.
m68knommu: add support for Coldfire 547x/548x interrupt controller
m68k{nommu}: Remove unused DEFINE's from asm-offsets.c
m68knommu: whitespace cleanup in 68328/entry.S
m68knommu: Document supported chips in intc-2.c and intc-simr.c.
m68knommu: fix strace support for 68328/68360
m68knommu: fix default starting date
arch/m68knommu: Removing dead 68328_SERIAL_UART2 config option
arch/m68knommu: Removing dead RAM_{16,32}_MB config option
arch/m68knommu: Removing dead M68KFPU_EMU config option
arch/m68knommu: Removing dead RELOCATE config option
...
Heiko Carstens [Mon, 25 Oct 2010 14:10:54 +0000 (16:10 +0200)]
[S390] topology: export cpu topology via proc/sysinfo
Export the cpu configuration topology via sysinfo. Two new lines are
introduced:
CPU Topology HW: 0 0 0 4 6 4
CPU Topology SW: 0 0 0 0 4 24
The HW line describes the cpu topology nesting levels when the maximum
nesting level is used to get the corresponding SYSIB.
The SW line describes what Linux is actually using. In this case it
supports only two levels (CONFIG_SCHED_BOOK off) and therefore the
hardware folded the two lower levels in the SYSIB response block.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Mon, 25 Oct 2010 14:10:53 +0000 (16:10 +0200)]
[S390] topology: move topology sysinfo code
Move the topology sysinfo SYSIB definitions to the proper place in
asm/sysinfo.h where they should be.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Mon, 25 Oct 2010 14:10:52 +0000 (16:10 +0200)]
[S390] topology: clean up facility detection
Move cpu topology facility detection to early setup code where it
should be.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Martin Schwidefsky [Mon, 25 Oct 2010 14:10:51 +0000 (16:10 +0200)]
[S390] cleanup facility list handling
Store the facility list once at system startup with stfl/stfle and
reuse the result for all facility tests.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
FUJITA Tomonori [Mon, 25 Oct 2010 14:10:50 +0000 (16:10 +0200)]
[S390] enable ARCH_DMA_ADDR_T_64BIT with 64BIT
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Haberland [Mon, 25 Oct 2010 14:10:49 +0000 (16:10 +0200)]
[S390] dasd: ignore unsolicited interrupts for DIAG
For the DASD DIAG discipline IO is started through special diagnose
calls. Unsolicited interrupts may contain information about the device
itself. But this information is not needed because the device is not
used directly.
Fix the case that an unimplemented dicipline function may be called
by ignoring unsolicited interrupts for the DIAG disciplin.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Mon, 25 Oct 2010 14:10:48 +0000 (16:10 +0200)]
[S390] kvm: Enable z196 instruction facilities
Enable PFPO, floating point extension, distinct-operands,
fast-BCR-serialization, high-word, interlocked-access, load/store-
on-condition, and population-count facilities for guests.
(bits 37, 44 and 45).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Weinhuber [Mon, 25 Oct 2010 14:10:47 +0000 (16:10 +0200)]
[S390] dasd: fix unsolicited interrupt recognition
The dasd interrupt handler needs to distinguish solicited from
unsolicited interrupts, as unsolicited interrupts may require special
handling (e.g. summary unit checks) and solicited interrupts require
proper error recovery for the failed I/O request.
The interrupt handler needs to check several bit fields in the
interrupt response block (irb) to make this distinction.
So far our check of the status control bits has not been specific
enough, which may lead to a failed request getting just retried
instead of the necessary error recovery.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 25 Oct 2010 14:10:46 +0000 (16:10 +0200)]
[S390] dasd: fix use after free in dbf
Writing to /proc/dasd/statistics while the debug level of the
generic dasd debug entry is set to DBF_DEBUG will lead to an
use after free when accessing the debug entry later.
Since for the format string "%s" in the s390 dbf only a pointer
to the string is stored in the debug feature and the buffer used
here is freed afterwards.
To fix this just remove the debug message.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Christian Borntraeger [Mon, 25 Oct 2010 14:10:45 +0000 (16:10 +0200)]
[S390] kvm: Fix badness at include/asm/mmu_context.h:83
commit
050eef364ad700590a605a0749f825cab4834b1e
[S390] fix tlb flushing vs. concurrent /proc accesses
broke KVM on s390x. On every schedule a
Badness at include/asm/mmu_context.h:83 appears. s390_enable_sie
replaces the mm on the __running__ task, therefore, we have to
increase the attach count of the new mm.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Peter Oberparleiter [Mon, 25 Oct 2010 14:10:44 +0000 (16:10 +0200)]
[S390] cio: fix I/O cancel function
Function ccw_device_cancel_halt_clear may cause an unexpected kernel
panic if a clear function is currently active at the subchannel for
which it is called. In that case, the iretry counter used to determine
the number of retries is never initialized, leading to an immediate
failure of the function which results in a kernel panic.
Fix this by initializing the iretry counter when the function is
first called. Also replace the kernel panic with a return code: a
single malfunctioning I/O device should not automatically cause a
system-wide kernel panic.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Mon, 25 Oct 2010 14:10:43 +0000 (16:10 +0200)]
[S390] topology: change default
Switch default value of the kernel parameter 'topology' from off to on.
Various performance measurements have finally shown that there are no
(known) regressions anywhere.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
projects / profile / common / kernel-common.git / log