Xiongfeng Wang [Fri, 11 Nov 2022 10:00:36 +0000 (18:00 +0800)]
crypto: hisilicon/qm - add missing pci_dev_put() in q_num_set()
[ Upstream commit
cc7710d0d4ebc6998f04035cde4f32c5ddbe9d7f ]
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before q_num_set() returns.
Fixes:
c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Herbert Xu [Fri, 11 Nov 2022 09:59:17 +0000 (17:59 +0800)]
crypto: cryptd - Use request context instead of stack for sub-request
[ Upstream commit
3a58c231172537f7b0e19d93ed33decd04f80eab ]
cryptd is buggy as it tries to use sync_skcipher without going
through the proper sync_skcipher interface. In fact it doesn't
even need sync_skcipher since it's already a proper skcipher and
can easily access the request context instead of using something
off the stack.
Fixes:
36b3875a97b8 ("crypto: cryptd - Remove VLA usage of skcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Tue, 8 Nov 2022 08:29:12 +0000 (16:29 +0800)]
crypto: ccree - Remove debugfs when platform_driver_register failed
[ Upstream commit
4f1c596df706c9aca662b6c214fad84047ae2a97 ]
When platform_driver_register failed, we need to remove debugfs,
which will caused a resource leak, fix it.
Failed logs as follows:
[ 32.606488] debugfs: Directory 'ccree' with parent '/' already present!
Fixes:
4c3f97276e15 ("crypto: ccree - introduce CryptoCell driver")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli [Fri, 11 Nov 2022 10:05:25 +0000 (02:05 -0800)]
scsi: scsi_debug: Fix a warning in resp_write_scat()
[ Upstream commit
216e179724c1d9f57a8ababf8bd7aaabef67f01b ]
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes:
481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mustafa Ismail [Tue, 15 Nov 2022 01:17:01 +0000 (19:17 -0600)]
RDMA/irdma: Do not request 2-level PBLEs for CQ alloc
[ Upstream commit
8f7e2daa6336f9f4b6f8a4715a809674606df16b ]
When allocating PBLE's for a large CQ, it is possible
that a 2-level PBLE is returned which would cause the
CQ allocation to fail since 1-level is assumed and checked for.
Fix this by requesting a level one PBLE only.
Fixes:
b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221115011701.1379-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mustafa Ismail [Tue, 15 Nov 2022 01:17:00 +0000 (19:17 -0600)]
RDMA/irdma: Fix RQ completion opcode
[ Upstream commit
24419777e9431137d5923a747f546facb1e49b1f ]
The opcode written by HW, in the RQ CQE, is the
RoCEv2/iWARP protocol opcode from the received
packet and not the SW opcode as currently assumed.
Fix this by returning the raw operation type and
queue type in the CQE to irdma_process_cqe and add
2 helpers set_ib_wc_op_sq set_ib_wc_op_rq to map
IRDMA HW op types to IB op types.
Note that for iWARP, only Write with Immediate is
supported so the opcode can only be IB_WC_RECV_RDMA_WITH_IMM
when there is immediate data present.
Fixes:
b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221115011701.1379-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mustafa Ismail [Tue, 15 Nov 2022 01:16:59 +0000 (19:16 -0600)]
RDMA/irdma: Fix inline for multiple SGE's
[ Upstream commit
4f44e519b6a945068755708119cca5b74d01d1f6 ]
Currently, inline send and inline write assume a single
SGE and only copy data from the first one. Add support
for multiple SGE's.
Fixes:
b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221115011701.1379-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bernard Metzler [Tue, 15 Nov 2022 17:07:47 +0000 (18:07 +0100)]
RDMA/siw: Set defined status for work completion with undefined status
[ Upstream commit
60da2d11fcbc043304910e4d2ca82f9bab953e63 ]
A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.
This bug leads to the following Smatch static checker warning:
drivers/infiniband/sw/siw/siw_cq.c:96 siw_reap_cqe()
error: buffer overflow 'map_cqe_status' 10 <= 21
Fixes:
bdf1da5df9da ("RDMA/siw: Fix immediate work request flush to completion queue")
Link: https://lore.kernel.org/r/20221115170747.1263298-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Zhang [Mon, 7 Nov 2022 08:51:36 +0000 (10:51 +0200)]
RDMA/nldev: Return "-EAGAIN" if the cm_id isn't from expected port
[ Upstream commit
ecacb3751f254572af0009b9501e2cdc83a30b6a ]
When filling a cm_id entry, return "-EAGAIN" instead of 0 if the cm_id
doesn'the have the same port as requested, otherwise an incomplete entry
may be returned, which causes "rdam res show cm_id" to return an error.
For example on a machine with two rdma devices with "rping -C 1 -v -s"
running background, the "rdma" command fails:
$ rdma -V
rdma utility, iproute2-5.19.0
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 28056 comm rping src-addr 0.0.0.0:7174
error: Protocol not available
While with this fix it succeeds:
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
link mlx5_1/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
Fixes:
00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/a08e898cdac5e28428eb749a99d9d981571b8ea7.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Zhang [Mon, 7 Nov 2022 08:51:35 +0000 (10:51 +0200)]
RDMA/core: Make sure "ib_port" is valid when access sysfs node
[ Upstream commit
5e15ff29b156bbbdeadae230c8ecd5ecd8ca2477 ]
The "ib_port" structure must be set before adding the sysfs kobject,
and reset after removing it, otherwise it may crash when accessing
the sysfs node:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000050
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000e85f5ba5
[
0000000000000050] pgd=
0000000848fd9003, pud=
000000085b387003, pmd=
0000000000000000
Internal error: Oops:
96000006 [#2] PREEMPT SMP
Modules linked in: ib_umad(O) mlx5_ib(O) nfnetlink_cttimeout(E) nfnetlink(E) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_nat_ipv6(E) nf_nat_ipv4(E) nf_conncount(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) mst_pciconf(O) ipmi_devintf(E) ipmi_msghandler(E) ipmb_dev_int(OE) mlx5_core(O) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) ib_core(O) mlx_compat(O) psample(E) sbsa_gwdt(E) uio_pdrv_genirq(E) uio(E) mlxbf_pmc(OE) mlxbf_gige(OE) mlxbf_tmfifo(OE) gpio_mlxbf2(OE) pwr_mlxbf(OE) mlx_trio(OE) i2c_mlxbf(OE) mlx_bootctl(OE) bluefield_edac(OE) knem(O) ip_tables(E) ipv6(E) crc_ccitt(E) [last unloaded: mst_pci]
Process grep (pid: 3372, stack limit = 0x0000000022055c92)
CPU: 5 PID: 3372 Comm: grep Tainted: G D OE 4.19.161-mlnx.47.gadcd9e3 #1
Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.9.2-15-ga2403ab Sep 8 2022
pstate:
40000005 (nZcv daif -PAN -UAO)
pc : hw_stat_port_show+0x4c/0x80 [ib_core]
lr : port_attr_show+0x40/0x58 [ib_core]
sp :
ffff000029f43b50
x29:
ffff000029f43b50 x28:
0000000019375000
x27:
ffff8007b821a540 x26:
ffff000029f43e30
x25:
0000000000008000 x24:
ffff000000eaa958
x23:
0000000000001000 x22:
ffff8007a4ce3000
x21:
ffff8007baff8000 x20:
ffff8007b9066ac0
x19:
ffff8007bae97578 x18:
0000000000000000
x17:
0000000000000000 x16:
0000000000000000
x15:
0000000000000000 x14:
0000000000000000
x13:
0000000000000000 x12:
0000000000000000
x11:
0000000000000000 x10:
0000000000000000
x9 :
0000000000000000 x8 :
ffff8007a4ce4000
x7 :
0000000000000000 x6 :
000000000000003f
x5 :
ffff000000e6a280 x4 :
ffff8007a4ce3000
x3 :
0000000000000000 x2 :
aaaaaaaaaaaaaaab
x1 :
ffff8007b9066a10 x0 :
ffff8007baff8000
Call trace:
hw_stat_port_show+0x4c/0x80 [ib_core]
port_attr_show+0x40/0x58 [ib_core]
sysfs_kf_seq_show+0x8c/0x150
kernfs_seq_show+0x44/0x50
seq_read+0x1b4/0x45c
kernfs_fop_read+0x148/0x1d8
__vfs_read+0x58/0x180
vfs_read+0x94/0x154
ksys_read+0x68/0xd8
__arm64_sys_read+0x28/0x34
el0_svc_common+0x88/0x18c
el0_svc_handler+0x78/0x94
el0_svc+0x8/0xe8
Code:
f2955562 aa1603e4 aa1503e0 f9405683 (
f9402861)
Fixes:
d8a5883814b9 ("RDMA/core: Replace the ib_port_data hw_stats pointers with a ib_port pointer")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/88867e705c42c1cd2011e45201c25eecdb9fef94.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Zhang [Mon, 7 Nov 2022 08:51:34 +0000 (10:51 +0200)]
RDMA/restrack: Release MR restrack when delete
[ Upstream commit
dac153f2802db1ad46207283cb9b2aae3d707a45 ]
The MR restrack also needs to be released when delete it, otherwise it
cause memory leak as the task struct won't be released.
Fixes:
13ef5539def7 ("RDMA/restrack: Count references to the verbs objects")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/703db18e8d4ef628691fb93980a709be673e62e3.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Sun, 6 Nov 2022 13:25:44 +0000 (21:25 +0800)]
f2fs: fix to avoid accessing uninitialized spinlock
[ Upstream commit
cc249e4cba9a6002c9d9e1438daf8440a160bc9e ]
syzbot reports a kernel bug:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
assign_lock_key+0x22a/0x240 kernel/locking/lockdep.c:981
register_lock_class+0x287/0x9b0 kernel/locking/lockdep.c:1294
__lock_acquire+0xe4/0x1f60 kernel/locking/lockdep.c:4934
lock_acquire+0x1a7/0x400 kernel/locking/lockdep.c:5668
__raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline]
_raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:154
spin_lock include/linux/spinlock.h:350 [inline]
f2fs_save_errors fs/f2fs/super.c:3868 [inline]
f2fs_handle_error+0x29/0x230 fs/f2fs/super.c:3896
f2fs_iget+0x215/0x4bb0 fs/f2fs/inode.c:516
f2fs_fill_super+0x47d3/0x7b50 fs/f2fs/super.c:4222
mount_bdev+0x26c/0x3a0 fs/super.c:1401
legacy_get_tree+0xea/0x180 fs/fs_context.c:610
vfs_get_tree+0x88/0x270 fs/super.c:1531
do_new_mount+0x289/0xad0 fs/namespace.c:3040
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount+0x2e3/0x3d0 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
F2FS-fs (loop1): Failed to read F2FS meta data inode
The root cause is if sbi->error_lock may be accessed before
its initialization, fix it.
Link: https://lore.kernel.org/linux-f2fs-devel/0000000000007edb6605ecbb6442@google.com/T/#u
Reported-by: syzbot+40642be9b7e0bb28e0df@syzkaller.appspotmail.com
Fixes:
95fa90c9e5a7 ("f2fs: support recording errors into superblock")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sascha Hauer [Tue, 1 Nov 2022 09:57:14 +0000 (10:57 +0100)]
PCI: imx6: Initialize PHY before deasserting core reset
[ Upstream commit
ae6b9a65af480144da323436d90e149501ea8937 ]
When the PHY is the reference clock provider then it must be initialized
and powered on before the reset on the client is deasserted, otherwise
the link will never come up. The order was changed in
cf236e0c0d59.
Restore the correct order to make the driver work again on boards where
the PHY provides the reference clock. This also changes the order for
boards where the Soc is the PHY reference clock divider, but this
shouldn't do any harm.
Link: https://lore.kernel.org/r/20221101095714.440001-1-s.hauer@pengutronix.de
Fixes:
cf236e0c0d59 ("PCI: imx6: Do not hide PHY driver callbacks and refine the error handling")
Tested-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nirmal Patel [Wed, 9 Nov 2022 14:26:52 +0000 (07:26 -0700)]
PCI: vmd: Disable MSI remapping after suspend
[ Upstream commit
d899aa668498c07ff217b666ae9712990306e682 ]
MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.
Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com
Fixes:
ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible")
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leonid Ravich [Wed, 9 Nov 2022 09:57:17 +0000 (11:57 +0200)]
IB/mad: Don't call to function that might sleep while in atomic context
[ Upstream commit
5c20311d76cbaeb7ed2ecf9c8b8322f8fc4a7ae3 ]
Tracepoints are not allowed to sleep, as such the following splat is
generated due to call to ib_query_pkey() in atomic context.
WARNING: CPU: 0 PID: 1888000 at kernel/trace/ring_buffer.c:2492 rb_commit+0xc1/0x220
CPU: 0 PID: 1888000 Comm: kworker/u9:0 Kdump: loaded Tainted: G OE --------- - - 4.18.0-305.3.1.el8.x86_64 #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2.module_el8.3.0+555+
a55c8938 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:rb_commit+0xc1/0x220
RSP: 0000:
ffffa8ac80f9bca0 EFLAGS:
00010202
RAX:
ffff8951c7c01300 RBX:
ffff8951c7c14a00 RCX:
0000000000000246
RDX:
ffff8951c707c000 RSI:
ffff8951c707c57c RDI:
ffff8951c7c14a00
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
ffff8951c7c01300 R11:
0000000000000001 R12:
0000000000000246
R13:
0000000000000000 R14:
ffffffff964c70c0 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff8951fbc00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f20e8f39010 CR3:
000000002ca10005 CR4:
0000000000170ef0
Call Trace:
ring_buffer_unlock_commit+0x1d/0xa0
trace_buffer_unlock_commit_regs+0x3b/0x1b0
trace_event_buffer_commit+0x67/0x1d0
trace_event_raw_event_ib_mad_recv_done_handler+0x11c/0x160 [ib_core]
ib_mad_recv_done+0x48b/0xc10 [ib_core]
? trace_event_raw_event_cq_poll+0x6f/0xb0 [ib_core]
__ib_process_cq+0x91/0x1c0 [ib_core]
ib_cq_poll_work+0x26/0x80 [ib_core]
process_one_work+0x1a7/0x360
? create_worker+0x1a0/0x1a0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x35/0x40
---[ end trace
78ba8509d3830a16 ]---
Fixes:
821bf1de45a1 ("IB/MAD: Add recv path trace point")
Signed-off-by: Leonid Ravich <lravich@gmail.com>
Link: https://lore.kernel.org/r/Y2t5feomyznrVj7V@leonid-Inspiron-3421
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bernard Metzler [Mon, 7 Nov 2022 14:50:57 +0000 (15:50 +0100)]
RDMA/siw: Fix immediate work request flush to completion queue
[ Upstream commit
bdf1da5df9da680589a7f74448dd0a94dd3e1446 ]
Correctly set send queue element opcode during immediate work request
flushing in post sendqueue operation, if the QP is in ERROR state.
An undefined ocode value results in out-of-bounds access to an array
for mapping the opcode between siw internal and RDMA core representation
in work completion generation. It resulted in a KASAN BUG report
of type 'global-out-of-bounds' during NFSoRDMA testing.
This patch further fixes a potential case of a malicious user which may
write undefined values for completion queue elements status or opcode,
if the CQ is memory mapped to user land. It avoids the same out-of-bounds
access to arrays for status and opcode mapping as described above.
Fixes:
303ae1cdfdf7 ("rdma/siw: application interface")
Fixes:
b0fff7317bb4 ("rdma/siw: completion queue methods")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20221107145057.895747-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Mon, 31 Oct 2022 22:48:18 +0000 (15:48 -0700)]
scsi: qla2xxx: Fix set-but-not-used variable warnings
[ Upstream commit
4fb2169d66b837a2986f569f5d5b81f79e6e4a4c ]
Fix the following two compiler warnings:
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
171 | uint8_t bail;
| ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
2023 | uint8_t bail;
| ^~~~
Cc: Arun Easi <arun.easi@qlogic.com>
Cc: Giridhar Malavali <giridhar.malavali@qlogic.com>
Fixes:
feafb7b1714c ("[SCSI] qla2xxx: Fix vport delete issues")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221031224818.2607882-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shiraz Saleem [Fri, 4 Nov 2022 23:49:57 +0000 (18:49 -0500)]
RDMA/irdma: Report the correct link speed
[ Upstream commit
4eace75e0853273755b878ffa9cce6de84df975a ]
The active link speed is currently hard-coded in irdma_query_port due
to which the port rate in ibstatus does reflect the active link speed.
Call ib_get_eth_speed in irdma_query_port to get the active link speed.
Fixes:
b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Reported-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20221104234957.1135-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Fri, 28 Oct 2022 09:30:26 +0000 (17:30 +0800)]
f2fs: fix to destroy sbi->post_read_wq in error path of f2fs_fill_super()
[ Upstream commit
7b02b2201893a71b881026cf574902019ab00db5 ]
In error path of f2fs_fill_super(), this patch fixes to call
f2fs_destroy_post_read_wq() once if we fail in f2fs_start_ckpt_thread().
Fixes:
261eeb9c1585 ("f2fs: introduce checkpoint_merge mount option")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mukesh Ojha [Thu, 27 Oct 2022 09:12:40 +0000 (14:42 +0530)]
f2fs: fix the assign logic of iocb
[ Upstream commit
0db18eec0d9a7ee525209e31e3ac2f673545b12f ]
commit
18ae8d12991b ("f2fs: show more DIO information in tracepoint")
introduces iocb field in 'f2fs_direct_IO_enter' trace event
And it only assigns the pointer and later it accesses its field
in trace print log.
Unable to handle kernel paging request at virtual address
ffffffc04cef3d30
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
pc : trace_raw_output_f2fs_direct_IO_enter+0x54/0xa4
lr : trace_raw_output_f2fs_direct_IO_enter+0x2c/0xa4
sp :
ffffffc0443cbbd0
x29:
ffffffc0443cbbf0 x28:
ffffff8935b120d0 x27:
ffffff8935b12108
x26:
ffffff8935b120f0 x25:
ffffff8935b12100 x24:
ffffff8935b110c0
x23:
ffffff8935b10000 x22:
ffffff88859a936c x21:
ffffff88859a936c
x20:
ffffff8935b110c0 x19:
ffffff8935b10000 x18:
ffffffc03b195060
x17:
ffffff8935b11e76 x16:
00000000000000cc x15:
ffffffef855c4f2c
x14:
0000000000000001 x13:
000000000000004e x12:
ffff0000ffffff00
x11:
ffffffef86c350d0 x10:
00000000000010c0 x9 :
000000000fe0002c
x8 :
ffffffc04cef3d28 x7 :
7f7f7f7f7f7f7f7f x6 :
0000000002000000
x5 :
ffffff8935b11e9a x4 :
0000000000006250 x3 :
ffff0a00ffffff04
x2 :
0000000000000002 x1 :
ffffffef86a0a31f x0 :
ffffff8935b10000
Call trace:
trace_raw_output_f2fs_direct_IO_enter+0x54/0xa4
print_trace_fmt+0x9c/0x138
print_trace_line+0x154/0x254
tracing_read_pipe+0x21c/0x380
vfs_read+0x108/0x3ac
ksys_read+0x7c/0xec
__arm64_sys_read+0x20/0x30
invoke_syscall+0x60/0x150
el0_svc_common.llvm.
1237943816091755067+0xb8/0xf8
do_el0_svc+0x28/0xa0
Fix it by copying the required variables for printing and while at
it fix the similar issue at some other places in the same file.
Fixes:
bd984c03097b ("f2fs: show more DIO information in tracepoint")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaegeuk Kim [Mon, 24 Oct 2022 23:00:35 +0000 (16:00 -0700)]
f2fs: allow to set compression for inlined file
[ Upstream commit
a995627e6dd81d4485d40ce64880017a080d71e6 ]
The below commit disallows to set compression on empty created file which
has a inline_data. Let's fix it.
Fixes:
7165841d578e ("f2fs: fix to check inline_data during compressed inode conversion")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dongdong Zhang [Tue, 25 Oct 2022 09:40:36 +0000 (17:40 +0800)]
f2fs: fix normal discard process
[ Upstream commit
b5f1a218ae5e4339130d6e733f0e63d623e09a2c ]
In the DPOLICY_BG mode, there is a conflict between
the two conditions "i + 1 < dpolicy->granularity" and
"i < DEFAULT_DISCARD_GRANULARITY". If i = 15, the first
condition is false, it will enter the second condition
and dispatch all small granularity discards in function
__issue_discard_cmd_orderly. The restrictive effect
of the first condition to small discards will be
invalidated. These two conditions should align.
Fixes:
20ee4382322c ("f2fs: issue small discard by LBA order")
Signed-off-by: Dongdong Zhang <zhangdongdong1@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yangtao Li [Tue, 25 Oct 2022 06:50:24 +0000 (14:50 +0800)]
f2fs: fix gc mode when gc_urgent_high_remaining is 1
[ Upstream commit
6359a1aaca527311b7145ec6eb16890a5ddf5214 ]
Under the current logic, when gc_urgent_high_remaining is set to 1,
the mode will be switched to normal at the beginning, instead of
running in gc_urgent mode.
Let's switch the gc mode back to normal when the gc ends.
Fixes:
265576181b4a ("f2fs: remove gc_urgent_high_limited for cleanup")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao Yu [Fri, 21 Oct 2022 02:34:22 +0000 (10:34 +0800)]
f2fs: fix to invalidate dcc->f2fs_issue_discard in error path
[ Upstream commit
91586ce0d39a05f88795aa8814fb99b1387236b3 ]
Syzbot reports a NULL pointer dereference issue as below:
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
get_task_struct include/linux/sched/task.h:110 [inline]
kthread_stop+0x34/0x1c0 kernel/kthread.c:703
f2fs_stop_discard_thread+0x3c/0x5c fs/f2fs/segment.c:1638
kill_f2fs_super+0x5c/0x194 fs/f2fs/super.c:4522
deactivate_locked_super+0x70/0xe8 fs/super.c:332
deactivate_super+0xd0/0xd4 fs/super.c:363
cleanup_mnt+0x1f8/0x234 fs/namespace.c:1186
__cleanup_mnt+0x20/0x30 fs/namespace.c:1193
task_work_run+0xc4/0x14c kernel/task_work.c:177
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x26c/0xbe0 kernel/exit.c:795
do_group_exit+0x60/0xe8 kernel/exit.c:925
__do_sys_exit_group kernel/exit.c:936 [inline]
__se_sys_exit_group kernel/exit.c:934 [inline]
__wake_up_parent+0x0/0x40 kernel/exit.c:934
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:52 [inline]
el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206
el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654
el0t_64_sync+0x18c/0x190 arch/arm64/kernel/entry.S:581
The root cause of this issue is in error path of f2fs_start_discard_thread(),
it missed to invalidate dcc->f2fs_issue_discard, later kthread_stop() may
access invalid pointer.
Fixes:
4d67490498ac ("f2fs: Don't create discard thread when device doesn't support realtime discard")
Reported-by: syzbot+035a381ea1afb63f098d@syzkaller.appspotmail.com
Reported-by: syzbot+729c925c2d9fc495ddee@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 25 Oct 2022 23:05:18 +0000 (16:05 -0700)]
fortify: Do not cast to "unsigned char"
[ Upstream commit
e9a40e1585d792751d3a122392695e5a53032809 ]
Do not cast to "unsigned char", as this needlessly creates type problems
when attempting builds without -Wno-pointer-sign[1]. The intent of the
cast is to drop possible "const" types.
[1] https://lore.kernel.org/lkml/CAHk-=wgz3Uba8w7kdXhsqR1qvfemYL+OFQdefJnkeqXG8qZ_pA@mail.gmail.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes:
3009f891bb9f ("fortify: Allow strlen() and strnlen() to pass compile-time known lengths")
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Fri, 28 Oct 2022 12:33:20 +0000 (20:33 +0800)]
apparmor: Fix memleak in alloc_ns()
[ Upstream commit
e9e6fa49dbab6d84c676666f3fe7d360497fd65b ]
After changes in commit
a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it.
Fixes:
a1bd627b46d1 ("apparmor: share profile name on replacement")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:48 +0000 (07:54 +0000)]
crypto: rockchip - rework by using crypto_engine
[ Upstream commit
57d67c6e8219b2a034c16d6149e30fb40fd39935 ]
Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:47 +0000 (07:54 +0000)]
crypto: rockchip - remove non-aligned handling
[ Upstream commit
bb3c7b73363c9a149b12b74c44ae94b73a8fddf8 ]
Now driver have fallback for un-aligned cases, remove all code handling
those cases.
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:46 +0000 (07:54 +0000)]
crypto: rockchip - better handle cipher key
[ Upstream commit
d6b23ccef82816050c2fd458c9dabfa0e0af09b9 ]
The key should not be set in hardware too much in advance, this will
fail it 2 TFM with different keys generate alternative requests.
The key should be stored and used just before doing cipher operations.
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:45 +0000 (07:54 +0000)]
crypto: rockchip - add fallback for ahash
[ Upstream commit
816600485cb597b3ff7d6806a95a78512839f775 ]
Adds a fallback for all case hardware cannot handle.
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:44 +0000 (07:54 +0000)]
crypto: rockchip - add fallback for cipher
[ Upstream commit
68ef8af09a1a912a5ed2cfaa4cca7606f52cef90 ]
The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:43 +0000 (07:54 +0000)]
crypto: rockchip - do not store mode globally
[ Upstream commit
87e356c4966444866186f68f05832fdcc0f351a3 ]
Storing the mode globally does not work if 2 requests are handled in the
same time.
We should store it in a request context.
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 07:54:41 +0000 (07:54 +0000)]
crypto: rockchip - do not do custom power management
[ Upstream commit
c50ef1411c8cbad0c7db100c477126076b6e3348 ]
The clock enable/disable at tfm init/exit is fragile,
if 2 tfm are init in the same time and one is removed just after,
it will leave the hardware uncloked even if a user remains.
Instead simply enable clocks at probe time.
We will do PM later.
Fixes:
ce0183cb6464b ("crypto: rockchip - switch to skcipher API")
Reviewed-by: John Keeping <john@metanate.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qilong [Tue, 18 Oct 2022 02:45:32 +0000 (10:45 +0800)]
f2fs: Fix the race condition of resize flag between resizefs
[ Upstream commit
28fc4e9077ce59ab28c89c20dc6be5154473218f ]
Because the set/clear SBI_IS_RESIZEFS flag not between any locks,
In the following case:
thread1 thread2
->ioctl(resizefs)
->set RESIZEFS flag ->ioctl(resizefs)
... ->set RESIZEFS flag
->clear RESIZEFS flag
->resizefs stream
# No RESIZEFS flag in the stream
Also before freeze_super, the resizefs not started, we should not set
the SBI_IS_RESIZEFS flag.
So move the set/clear SBI_IS_RESIZEFS flag between the cp_mutex and
gc_lock.
Fixes:
b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kunihiko Hayashi [Thu, 25 Aug 2022 09:01:01 +0000 (18:01 +0900)]
PCI: pci-epf-test: Register notifier if only core_init_notifier is enabled
[ Upstream commit
6acd25cc98ce0c9ee4fefdaf44fc8bca534b26e5 ]
The pci_epf_test_notifier function should be installed also if only
core_init_notifier is enabled. Fix the current logic.
Link: https://lore.kernel.org/r/20220825090101.20474-1-hayashi.kunihiko@socionext.com
Fixes:
5e50ee27d4a5 ("PCI: pci-epf-test: Add support to defer core initialization")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Om Prakash Singh <omp@nvidia.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leon Romanovsky [Tue, 25 Oct 2022 07:37:13 +0000 (10:37 +0300)]
RDMA/core: Fix order of nldev_exit call
[ Upstream commit
4508d32ccced24c972bc4592104513e1ff8439b5 ]
Create symmetrical exit flow by calling to nldev_exit() after
call to rdma_nl_unregister(RDMA_NL_LS).
Fixes:
6c80b41abe22 ("RDMA/netlink: Add nldev initialization flows")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/64e676774a53a406f4cde265d5a4cfd6b8e97df9.1666683334.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vidya Sagar [Mon, 26 Sep 2022 11:19:23 +0000 (16:49 +0530)]
PCI: dwc: Fix n_fts[] array overrun
[ Upstream commit
66110361281b2f7da0c8bd51eaf1f152f4236035 ]
commit
aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.
Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com
Fixes:
aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Fri, 21 Oct 2022 00:46:04 +0000 (08:46 +0800)]
apparmor: Use pointer to struct aa_label for lbs_cred
[ Upstream commit
37923d4321b1e38170086da2c117f78f2b0f49c6 ]
According to the implementations of cred_label() and set_cred_label(),
we should use pointer to struct aa_label for lbs_cred instead of struct
aa_task_ctx, this patch fixes it.
Fixes:
bbd3662a8348 ("Infrastructure management of the cred security blob")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Tue, 18 Oct 2022 20:29:49 +0000 (13:29 -0700)]
scsi: core: Fix a race between scsi_done() and scsi_timeout()
[ Upstream commit
978b7922d3dca672b41bb4b8ce6c06ab77112741 ]
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes:
15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Robert Elliott [Fri, 30 Sep 2022 21:40:14 +0000 (16:40 -0500)]
crypto: tcrypt - fix return value for multiple subtests
[ Upstream commit
65c92cbb3f2365627a10cf97560d51e88fb4e588 ]
When a test mode invokes multiple tests (e.g., mode 0 invokes modes
1 through 199, and mode 3 tests three block cipher modes with des),
don't keep accumulating the return values with ret += tcrypt_test(),
which results in a bogus value if more than one report a nonzero
value (e.g., two reporting -2 (-ENOENT) end up reporting -4 (-EINTR)).
Instead, keep track of the minimum return value reported by any
subtest.
Fixes:
4e033a6bc70f ("crypto: tcrypt - Do not exit on success in fips mode")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Natalia Petrova [Wed, 28 Sep 2022 10:25:05 +0000 (13:25 +0300)]
crypto: nitrox - avoid double free on error path in nitrox_sriov_init()
[ Upstream commit
094528b6a5a755b1195a01e10b13597d67d1a0e6 ]
If alloc_workqueue() fails in nitrox_mbox_init() it deallocates
ndev->iov.vfdev and returns error code, but then nitrox_sriov_init()
calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated
again.
Fix this by nulling ndev->iov.vfdev after the first deallocation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
9e5de3e06e54 ("crypto: cavium/nitrox - Add mailbox...")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corentin Labbe [Tue, 27 Sep 2022 08:55:55 +0000 (08:55 +0000)]
crypto: sun8i-ss - use dma_addr instead u32
[ Upstream commit
839b8ae2fc10f205317bcc32c9de18456756e1f5 ]
The DMA address need to be stored in a dma_addr_t
Fixes:
359e893e8af4 ("crypto: sun8i-ss - rework handling of IV")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Weili Qian [Sat, 24 Sep 2022 11:04:31 +0000 (19:04 +0800)]
crypto: hisilicon/qm - re-enable communicate interrupt before notifying PF
[ Upstream commit
ee1537fe3dd89860d0336563891f6cac707d0cb5 ]
After the device is reset, the VF needs to re-enable communication
interrupt before the VF sends restart complete message to the PF.
If the interrupt is re-enabled after the VF notifies the PF, the PF
may fail to send messages to the VF after receiving VF's restart
complete message.
Fixes:
760fe22cf5e9 ("crypto: hisilicon/qm - update reset flow")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Weili Qian [Sat, 24 Sep 2022 10:14:42 +0000 (18:14 +0800)]
crypto: hisilicon/qm - fix incorrect parameters usage
[ Upstream commit
f57e292897cac13b6ddee078aea21173b234ecb7 ]
In qm_get_xqc_depth(), parameters low_bits and high_bits save
the values of the corresponding bits. However, the values saved by the
two parameters are opposite. As a result, the values returned to the
callers are incorrect.
Fixes:
129a9f340172 ("crypto: hisilicon/qm - get qp num and depth from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Tue, 20 Sep 2022 11:01:28 +0000 (04:01 -0700)]
apparmor: Fix regression in stacking due to label flags
[ Upstream commit
1f939c6bd1512d0b39b470396740added3cb403f ]
The unconfined label flag is not being computed correctly. It
should only be set if all the profiles in the vector are set, which
is different than what is required for the debug and stale flag
that are set if any on the profile flags are set.
Fixes:
c1ed5da19765 ("apparmor: allow label to carry debug flags")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Sat, 7 May 2022 01:57:12 +0000 (18:57 -0700)]
apparmor: Fix abi check to include v8 abi
[ Upstream commit
1b5a6198f5a9d0aa5497da0dc4bcd4fc166ee516 ]
The v8 abi is supported by the kernel but the userspace supported
version check does not allow for it. This was missed when v8 was added
due to a bug in the userspace compiler which was setting an older abi
version for v8 encoding (which is forward compatible except on the
network encoding). However it is possible to detect the network
encoding by checking the policydb network support which the code
does. The end result was that missing the abi flag worked until
userspace was fixed and began correctly checking for the v8 abi
version.
Fixes:
56974a6fcfef ("apparmor: add base infastructure for socket mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Johansen [Tue, 6 Sep 2022 10:39:55 +0000 (03:39 -0700)]
apparmor: fix lockdep warning when removing a namespace
[ Upstream commit
9c4557efc558a68e4cd973490fd936d6e3414db8 ]
Fix the following lockdep warning
[ 1119.158984] ============================================
[ 1119.158988] WARNING: possible recursive locking detected
[ 1119.158996] 6.0.0-rc1+ #257 Tainted: G E N
[ 1119.158999] --------------------------------------------
[ 1119.159001] bash/80100 is trying to acquire lock:
[ 1119.159007]
ffff88803e79b4a0 (&ns->lock/1){+.+.}-{4:4}, at: destroy_ns.part.0+0x43/0x140
[ 1119.159028]
but task is already holding lock:
[ 1119.159030]
ffff8881009764a0 (&ns->lock/1){+.+.}-{4:4}, at: aa_remove_profiles+0x3f0/0x640
[ 1119.159040]
other info that might help us debug this:
[ 1119.159042] Possible unsafe locking scenario:
[ 1119.159043] CPU0
[ 1119.159045] ----
[ 1119.159047] lock(&ns->lock/1);
[ 1119.159051] lock(&ns->lock/1);
[ 1119.159055]
*** DEADLOCK ***
Which is caused by an incorrect lockdep nesting notation
Fixes:
feb3c766a3ab ("apparmor: fix possible recursive lock warning in __aa_create_ns")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Tue, 23 Aug 2022 01:15:03 +0000 (09:15 +0800)]
apparmor: fix a memleak in multi_transaction_new()
[ Upstream commit
c73275cf6834787ca090317f1d20dbfa3b7f05aa ]
In multi_transaction_new(), the variable t is not freed or passed out
on the failure of copy_from_user(t->data, buf, size), which could lead
to a memleak.
Fix this bug by adding a put_multi_transaction(t) in the error path.
Fixes:
1dea3b41e84c5 ("apparmor: speed up transactional queries")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Fri, 9 Dec 2022 23:52:42 +0000 (01:52 +0200)]
net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path
[ Upstream commit
e095493091e850d5292ad01d8fbf5cde1d89ac53 ]
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.
Fixes:
328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Staszewski [Fri, 9 Dec 2022 18:54:11 +0000 (10:54 -0800)]
i40e: Fix the inability to attach XDP program on downed interface
[ Upstream commit
0c87b545a2ed5cd8a6318011f1c92b188c2d74bc ]
Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.
Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.
Fixes:
613142b0bb88 ("i40e: Log error for oversized MTU on device")
Fixes:
0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Saeed Mahameed <saeed@kernel.com>
Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Piergiorgio Beruto [Sat, 10 Dec 2022 22:37:22 +0000 (23:37 +0100)]
stmmac: fix potential division by 0
[ Upstream commit
ede5a389852d3640a28e7187fb32b7f204380901 ]
When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().
Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.
[ 95.062067] socfpga-dwmac
ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 95.076440] socfpga-dwmac
ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[ 95.095964] dwmac1000: Master AXI performs any burst length
[ 95.101588] socfpga-dwmac
ff700000.ethernet eth0: No Safety Features support found
[ 95.109428] Division by zero in kernel.
[ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[ 95.123686] Hardware name: Altera SOCFPGA
[ 95.127695] unwind_backtrace from show_stack+0x10/0x14
[ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c
[ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10
[ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18
[ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[ 95.171117] __stmmac_open from stmmac_open+0x30/0x44
[ 95.176182] stmmac_open from __dev_open+0x11c/0x134
[ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c
[ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50
[ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604
[ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214
[ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4
[ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38
[ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844
[ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c
[ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[ 95.227790] 1fa0:
00574c4f be9aeca4 00000003 00008914 be9aeca4 be9aec50
[ 95.235945] 1fc0:
00574c4f be9aeca4 0059f078 00000036 be9aee8c be9aef7a 00000015 00000000
[ 95.244096] 1fe0:
005a01f0 be9aec38 004d7484 b6e67d74
Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
Fixes:
91a2559c1dc5 ("net: stmmac: Fix sub-second increment")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/de4c64ccac9084952c56a06a8171d738604c4770.1670678513.git.piergiorgio.beruto@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 10 Dec 2022 17:35:00 +0000 (18:35 +0100)]
octeontx2-af: cn10k: mcs: Fix a resource leak in the probe and remove functions
[ Upstream commit
87c978123ef1f346d7385eaccc141022d368166f ]
In mcs_register_interrupts(), a call to request_irq() is not balanced by a
corresponding free_irq(), neither in the error handling path, nor in the
remove function.
Add the missing calls.
Fixes:
6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69f153db5152a141069f990206e7389f961d41ec.1670693669.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 7 Dec 2022 02:18:35 +0000 (10:18 +0800)]
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
0ba18967d4544955b2eff2fbc4f2a8750c4df90a ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 7 Dec 2022 02:18:34 +0000 (10:18 +0800)]
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
39c1eb6fcbae8ce9bb71b2ac5cb609355a2b181b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
9238f36a5a50 ("Bluetooth: Add request cmd_complete and cmd_status functions")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 7 Dec 2022 02:18:33 +0000 (10:18 +0800)]
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
7b503e339c1a80bf0051ec2d19c3bc777014ac61 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 7 Dec 2022 02:18:32 +0000 (10:18 +0800)]
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
383630cc6758d619874c2e8bb2f68a61f3f9ef6e ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 7 Dec 2022 02:18:31 +0000 (10:18 +0800)]
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
8f458f783dfbb19c1f1cb58ed06eeb701f52091b ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Wed, 7 Dec 2022 02:18:30 +0000 (10:18 +0800)]
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
df4cfc91208e0a98f078223793f5871b1a82cc54 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 6 Dec 2022 12:59:10 +0000 (20:59 +0800)]
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
[ Upstream commit
b15a6bd3c80c77faec8317319b97f976b1a08332 ]
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes:
803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang ShaoBo [Mon, 5 Dec 2022 13:53:57 +0000 (21:53 +0800)]
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
[ Upstream commit
cee50ce899de415baf4da3ed38b7d4f13c3170d1 ]
skb allocated by __hci_cmd_sync would not be used whether in checking
for supported iBT hardware variants or after, we should free it in all
error branches, this patch makes the case read version failed or default
error case free skb before return.
Fixes:
c86c7285bb08 ("Bluetooth: btintel: Fix the legacy bootloader returns tlv based version")
Fixes:
019a1caa7fd2 ("Bluetooth: btintel: Refactoring setup routine for bootloader devices")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Tue, 6 Dec 2022 01:11:57 +0000 (17:11 -0800)]
Bluetooth: hci_conn: Fix crash on hci_create_cis_sync
[ Upstream commit
50757a259ba78c4e938b5735e76ffec6cd0c942e ]
When attempting to connect multiple ISO sockets without using
DEFER_SETUP may result in the following crash:
BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0
Read of size 2 at addr
0000000000000036 by task kworker/u3:1/50
CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted
6.0.0-rc7-02243-gb84a13ff4eda #4373
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS 1.16.0-1.fc36 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x19/0x27
kasan_report+0xbc/0xf0
? hci_create_cis_sync+0x18b/0x2b0
hci_create_cis_sync+0x18b/0x2b0
? get_link_mode+0xd0/0xd0
? __ww_mutex_lock_slowpath+0x10/0x10
? mutex_lock+0xe0/0xe0
? get_link_mode+0xd0/0xd0
hci_cmd_sync_work+0x111/0x190
process_one_work+0x427/0x650
worker_thread+0x87/0x750
? process_one_work+0x650/0x650
kthread+0x14e/0x180
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
Fixes:
26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 30 Oct 2022 07:00:03 +0000 (08:00 +0100)]
Bluetooth: Fix EALREADY and ELOOP cases in bt_status()
[ Upstream commit
63db780a93eb802ece1bbf61ab5894ad8827b56e ]
'err' is known to be <0 at this point.
So, some cases can not be reached because of a missing "-".
Add it.
Fixes:
ca2045e059c3 ("Bluetooth: Add bt_status")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Inga Stotland [Sat, 22 Oct 2022 00:48:56 +0000 (17:48 -0700)]
Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS
[ Upstream commit
3b1c7c00b8c22b3cb79532252c59eb0b287bb86d ]
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS
command, use the correct op code in error status report:
was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS.
Fixes:
12410572833a2 ("Bluetooth: Break add adv into two mgmt commands")
Signed-off-by: Inga Stotland <inga.stotland@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 20 Oct 2022 02:16:56 +0000 (10:16 +0800)]
Bluetooth: hci_core: fix error handling in hci_register_dev()
[ Upstream commit
0d75da38e060d21f948b3df5f5e349c962cf1ed2 ]
If hci_register_suspend_notifier() returns error, the hdev and rfkill
are leaked. We could disregard the error and print a warning message
instead to avoid leaks, as it just means we won't be handing suspend
requests.
Fixes:
9952d90ea288 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Firo Yang [Fri, 9 Dec 2022 05:48:54 +0000 (13:48 +0800)]
sctp: sysctl: make extra pointers netns aware
[ Upstream commit
da05cecc4939c0410d56c29e252998b192756318 ]
Recently, a customer reported that from their container whose
net namespace is different to the host's init_net, they can't set
the container's net.sctp.rto_max to any value smaller than
init_net.sctp.rto_min.
For instance,
Host:
sudo sysctl net.sctp.rto_min
net.sctp.rto_min = 1000
Container:
echo 100 > /mnt/proc-net/sctp/rto_min
echo 400 > /mnt/proc-net/sctp/rto_max
echo: write error: Invalid argument
This is caused by the check made from this'commit
4f3fdf3bc59c
("sctp: add check rto_min and rto_max in sysctl")'
When validating the input value, it's always referring the boundary
value set for the init_net namespace.
Having container's rto_max smaller than host's init_net.sctp.rto_min
does make sense. Consider that the rto between two containers on the
same host is very likely smaller than it for two hosts.
So to fix this problem, as suggested by Marcelo, this patch makes the
extra pointers of rto_min, rto_max, pf_retrans, and ps_retrans point
to the corresponding variables from the newly created net namespace while
the new net namespace is being registered in sctp_sysctl_net_register.
Fixes:
4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl")
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Firo Yang <firo.yang@suse.com>
Link: https://lore.kernel.org/r/20221209054854.23889-1-firo.yang@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Pilmore [Fri, 9 Dec 2022 00:06:59 +0000 (16:06 -0800)]
ntb_netdev: Use dev_kfree_skb_any() in interrupt context
[ Upstream commit
5f7d78b2b12a9d561f48fa00bab29b40f4616dad ]
TX/RX callback handlers (ntb_netdev_tx_handler(),
ntb_netdev_rx_handler()) can be called in interrupt
context via the DMA framework when the respective
DMA operations have completed. As such, any calls
by these routines to free skb's, should use the
interrupt context safe dev_kfree_skb_any() function.
Previously, these callback handlers would call the
interrupt unsafe version of dev_kfree_skb(). This has
not presented an issue on Intel IOAT DMA engines as
that driver utilizes tasklets rather than a hard
interrupt handler, like the AMD PTDMA DMA driver.
On AMD systems, a kernel WARNING message is
encountered, which is being issued from
skb_release_head_state() due to in_hardirq()
being true.
Besides the user visible WARNING from the kernel,
the other symptom of this bug was that TCP/IP performance
across the ntb_netdev interface was very poor, i.e.
approximately an order of magnitude below what was
expected. With the repair to use dev_kfree_skb_any(),
kernel WARNINGs from skb_release_head_state() ceased
and TCP/IP performance, as measured by iperf, was on
par with expected results, approximately 20 Gb/s on
AMD Milan based server. Note that this performance
is comparable with Intel based servers.
Fixes:
765ccc7bc3d91 ("ntb_netdev: correct skb leak")
Fixes:
548c237c0a997 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Eric Pilmore <epilmore@gigaio.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221209000659.8318-1-epilmore@gigaio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jerry Ray [Fri, 9 Dec 2022 15:35:02 +0000 (09:35 -0600)]
net: lan9303: Fix read error execution path
[ Upstream commit
8964916d206071b058c6351f88b1966bd58cbde0 ]
This patch fixes an issue where a read failure of a port statistic counter
will return unknown results. While it is highly unlikely the read will
ever fail, it is much cleaner to return a zero for the stat count.
Fixes:
a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221209153502.7429-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roger Quadros [Thu, 8 Dec 2022 10:55:34 +0000 (12:55 +0200)]
net: ethernet: ti: am65-cpsw: Fix PM runtime leakage in am65_cpsw_nuss_ndo_slave_open()
[ Upstream commit
5821504f5073983733465b8bc430049c4343bbd7 ]
Ensure pm_runtime_put() is issued in error path.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes:
93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Saeed Mahameed <saeed@kernel.org>
Link: https://lore.kernel.org/r/20221208105534.63709-1-rogerq@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Schneider-Pargmann [Tue, 6 Dec 2022 11:57:26 +0000 (12:57 +0100)]
can: tcan4x5x: Fix use of register error status mask
[ Upstream commit
67727a17a6b375d68fe569b77e6516b034b834c0 ]
TCAN4X5X_ERROR_STATUS is not a status register that needs clearing
during interrupt handling. Instead this is a masking register that masks
error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register
effectively masks everything.
Rename the register and mask all error interrupts only once by writing
to the register in tcan4x5x_init.
Fixes:
5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-10-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vivek Yadav [Wed, 7 Dec 2022 10:06:31 +0000 (15:36 +0530)]
can: m_can: Call the RAM init directly from m_can_chip_config
[ Upstream commit
eaacfeaca7ad0804b9a6eff7afeba93a87db7638 ]
When we try to access the mcan message ram addresses during the probe,
hclk is gated by any other drivers or disabled, because of that probe
gets failed.
Move the mram init functionality to mcan chip config called by
m_can_start from mcan open function, by that time clocks are
enabled.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Vivek Yadav <vivek.2311@samsung.com>
Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of:
67727a17a6b3 ("can: tcan4x5x: Fix use of register error status mask")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Schneider-Pargmann [Tue, 6 Dec 2022 11:57:25 +0000 (12:57 +0100)]
can: tcan4x5x: Remove invalid write in clear_interrupts
[ Upstream commit
40c9e4f676abbe194541d88e796341c92d5a13c0 ]
Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes
to this register do not have any effect.
Remove this write. The m_can driver aldready clears the interrupts in
m_can_isr() by writing to M_CAN_IR which is translated to register
0x1050 which is a writable version of this register.
Fixes:
5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-9-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Lendacky [Thu, 8 Dec 2022 16:22:25 +0000 (10:22 -0600)]
net: amd-xgbe: Check only the minimum speed for active/passive cables
[ Upstream commit
f8ab263d4d48e6dab752029bf562f20a2ee630ed ]
There are cables that exist that can support speeds in excess of 10GbE.
The driver, however, restricts the EEPROM advertised nominal bitrate to
a specific range, which can prevent usage of cables that can support,
for example, up to 25GbE.
Rather than checking that an active or passive cable supports a specific
range, only check for a minimum supported speed.
Fixes:
abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Lendacky [Thu, 8 Dec 2022 16:22:24 +0000 (10:22 -0600)]
net: amd-xgbe: Fix logic around active and passive cables
[ Upstream commit
4998006c73afe44e2f639d55bd331c6c26eb039f ]
SFP+ active and passive cables are copper cables with fixed SFP+ end
connectors. Due to a misinterpretation of this, SFP+ active cables could
end up not being recognized, causing the driver to fail to establish a
connection.
Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is
the default cable type, and handle active and passive cables when they are
specifically detected.
Fixes:
abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 15:01:58 +0000 (23:01 +0800)]
af_unix: call proto_unregister() in the error path in af_unix_init()
[ Upstream commit
73e341e0281a35274629e9be27eae2f9b1b492bf ]
If register unix_stream_proto returns error, unix_dgram_proto needs
be unregistered.
Fixes:
94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Gobert [Thu, 8 Dec 2022 14:54:46 +0000 (15:54 +0100)]
net: setsockopt: fix IPV6_UNICAST_IF option for connected sockets
[ Upstream commit
526682b458b1b56d2e0db027df535cb5cdcfde59 ]
Change the behaviour of ip6_datagram_connect to consider the interface
set by the IPV6_UNICAST_IF socket option, similarly to udpv6_sendmsg.
This change is the IPv6 counterpart of the fix for IP_UNICAST_IF.
The tests introduced by that patch showed that the incorrect
behavior is present in IPv6 as well.
This patch fixes the broken test.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/202210062117.c7eef1a3-oliver.sang@intel.com
Fixes:
0e4d354762ce ("net-next: Fix IP_UNICAST_IF option behavior for connected sockets")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 14:21:47 +0000 (22:21 +0800)]
net: amd: lance: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
6151d105dfce8c23edf30eed35e97f3d9b96a35c ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In these two cases, dev_kfree_skb() is called consume the xmited SKB,
so replace it with dev_consume_skb_irq().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 14:21:46 +0000 (22:21 +0800)]
hamradio: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
3727f742915f04f6fc550b80cf406999bd4e90d0 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs,
so replace it with dev_kfree_skb_irq().
In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed
queue length, so replace it with dev_kfree_skb_irq().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 14:21:45 +0000 (22:21 +0800)]
net: ethernet: dnet: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
f07fadcbee2a5e84caa67c7c445424200bffb60b ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
In this case, the lock is used to protected 'bp', so we can move
dev_kfree_skb() after the spin_unlock_irqrestore().
Fixes:
4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 14:21:44 +0000 (22:21 +0800)]
net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
d1678bf45f21fa5ae4a456f821858679556ea5f8 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to
drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes:
bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 13:37:35 +0000 (21:37 +0800)]
net: apple: bmac: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
5fe02e046e6422c4adfdbc50206ec7186077da24 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 13:37:34 +0000 (21:37 +0800)]
net: apple: mace: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
3dfe3486c1cd4f82b466b7d307f23777137b8acc ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hangbin Liu [Thu, 8 Dec 2022 12:04:52 +0000 (20:04 +0800)]
net/tunnel: wait until all sk_user_data reader finish before releasing the sock
[ Upstream commit
3cf7203ca620682165706f70a1b12b5194607dce ]
There is a race condition in vxlan that when deleting a vxlan device
during receiving packets, there is a possibility that the sock is
released after getting vxlan_sock vs from sk_user_data. Then in
later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got
NULL pointer dereference. e.g.
#0 [
ffffa25ec6978a38] machine_kexec at
ffffffff8c669757
#1 [
ffffa25ec6978a90] __crash_kexec at
ffffffff8c7c0a4d
#2 [
ffffa25ec6978b58] crash_kexec at
ffffffff8c7c1c48
#3 [
ffffa25ec6978b60] oops_end at
ffffffff8c627f2b
#4 [
ffffa25ec6978b80] page_fault_oops at
ffffffff8c678fcb
#5 [
ffffa25ec6978bd8] exc_page_fault at
ffffffff8d109542
#6 [
ffffa25ec6978c00] asm_exc_page_fault at
ffffffff8d200b62
[exception RIP: vxlan_ecn_decapsulate+0x3b]
RIP:
ffffffffc1014e7b RSP:
ffffa25ec6978cb0 RFLAGS:
00010246
RAX:
0000000000000008 RBX:
ffff8aa000888000 RCX:
0000000000000000
RDX:
000000000000000e RSI:
ffff8a9fc7ab803e RDI:
ffff8a9fd1168700
RBP:
ffff8a9fc7ab803e R8:
0000000000700000 R9:
00000000000010ae
R10:
ffff8a9fcb748980 R11:
0000000000000000 R12:
ffff8a9fd1168700
R13:
ffff8aa000888000 R14:
00000000002a0000 R15:
00000000000010ae
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#7 [
ffffa25ec6978ce8] vxlan_rcv at
ffffffffc10189cd [vxlan]
#8 [
ffffa25ec6978d90] udp_queue_rcv_one_skb at
ffffffff8cfb6507
#9 [
ffffa25ec6978dc0] udp_unicast_rcv_skb at
ffffffff8cfb6e45
#10 [
ffffa25ec6978dc8] __udp4_lib_rcv at
ffffffff8cfb8807
#11 [
ffffa25ec6978e20] ip_protocol_deliver_rcu at
ffffffff8cf76951
#12 [
ffffa25ec6978e48] ip_local_deliver at
ffffffff8cf76bde
#13 [
ffffa25ec6978ea0] __netif_receive_skb_one_core at
ffffffff8cecde9b
#14 [
ffffa25ec6978ec8] process_backlog at
ffffffff8cece139
#15 [
ffffa25ec6978f00] __napi_poll at
ffffffff8ceced1a
#16 [
ffffa25ec6978f28] net_rx_action at
ffffffff8cecf1f3
#17 [
ffffa25ec6978fa0] __softirqentry_text_start at
ffffffff8d4000ca
#18 [
ffffa25ec6978ff0] do_softirq at
ffffffff8c6fbdc3
Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh
Fix this by waiting for all sk_user_data reader to finish before
releasing the sock.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Fixes:
6a93cc905274 ("udp-tunnel: Add a few more UDP tunnel APIs")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Zetao [Thu, 8 Dec 2022 12:05:40 +0000 (20:05 +0800)]
net: farsync: Fix kmemleak when rmmods farsync
[ Upstream commit
2f623aaf9f31de968dea6169849706a2f9be444c ]
There are two memory leaks reported by kmemleak:
unreferenced object 0xffff888114b20200 (size 128):
comm "modprobe", pid 4846, jiffies
4295146524 (age 401.345s)
hex dump (first 32 bytes):
e0 62 57 09 81 88 ff ff e0 62 57 09 81 88 ff ff .bW......bW.....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<
ffffffff83d35c78>] __hw_addr_add_ex+0x198/0x6c0
[<
ffffffff83d3989d>] dev_addr_init+0x13d/0x230
[<
ffffffff83d1063d>] alloc_netdev_mqs+0x10d/0xe50
[<
ffffffff82b4a06e>] alloc_hdlcdev+0x2e/0x80
[<
ffffffffa016a741>] fst_add_one+0x601/0x10e0 [farsync]
...
unreferenced object 0xffff88810b85b000 (size 1024):
comm "modprobe", pid 4846, jiffies
4295146523 (age 401.346s)
hex dump (first 32 bytes):
00 00 b0 02 00 c9 ff ff 00 70 0a 00 00 c9 ff ff .........p......
00 00 00 f2 00 00 00 f3 0a 00 00 00 02 00 00 00 ................
backtrace:
[<
ffffffff815bcd82>] kmalloc_trace+0x22/0x60
[<
ffffffffa016a294>] fst_add_one+0x154/0x10e0 [farsync]
[<
ffffffff82060e83>] local_pci_probe+0xd3/0x170
...
The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.
Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Thu, 8 Dec 2022 12:01:21 +0000 (20:01 +0800)]
ethernet: s2io: don't call dev_kfree_skb() under spin_lock_irqsave()
[ Upstream commit
6cee96e09df54ae17784c0f38a49e0ed8229b825 ]
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in free_tx_buffers() to drop
the SKBs in tx buffers, when the card is down, so replace it with
dev_kfree_skb_irq() here.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ruanjinjie [Sun, 11 Dec 2022 02:33:37 +0000 (10:33 +0800)]
of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop()
[ Upstream commit
ee9d7a0e754568180a2f8ebc4aad226278a9116f ]
When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will
be NULL, and strcmp() will cause null pointer dereference.
Fixes:
2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20221211023337.592266-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Anastasov [Tue, 22 Nov 2022 16:46:01 +0000 (18:46 +0200)]
ipvs: use u64_stats_t for the per-cpu counters
[ Upstream commit
1dbd8d9a82e3f26b9d063292d47ece673f48fce2 ]
Use the provided u64_stats_t type to avoid
load/store tearing.
Fixes:
316580b69d0a ("u64_stats: provide u64_stats_t type")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Cc: yunhong-cgl jiang <xintian1976@gmail.com>
Cc: "dust.li" <dust.li@linux.alibaba.com>
Reviewed-by: Jiri Wiesner <jwiesner@suse.de>
Tested-by: Jiri Wiesner <jwiesner@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Wed, 7 Dec 2022 08:54:10 +0000 (08:54 +0000)]
drivers: net: qlcnic: Fix potential memory leak in qlcnic_sriov_init()
[ Upstream commit
01de1123322e4fe1bbd0fcdf0982511b55519c03 ]
If vp alloc failed in qlcnic_sriov_init(), all previously allocated vp
needs to be freed.
Fixes:
f197a7aa6288 ("qlcnic: VF-PF communication channel implementation")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Wed, 7 Dec 2022 08:34:13 +0000 (16:34 +0800)]
net: stmmac: fix possible memory leak in stmmac_dvr_probe()
[ Upstream commit
a137f3f27f9290933fe7e40e6dc8a445781c31a2 ]
The bitmap_free() should be called to free priv->af_xdp_zc_qps
when create_singlethread_workqueue() fails, otherwise there will
be a memory leak, so we add the err path error_wq_init to fix it.
Fixes:
bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Wed, 7 Dec 2022 08:31:59 +0000 (16:31 +0800)]
net: stmmac: selftests: fix potential memleak in stmmac_test_arpoffload()
[ Upstream commit
f150b63f3fa5fdd81e0dd6151e8850268e29438c ]
The skb allocated by stmmac_test_get_arp_skb() hasn't been released in
some error handling case, which will lead to a memory leak. Fix this up
by adding kfree_skb() to release skb.
Compile tested only.
Fixes:
5e3fb0a6e2b3 ("net: stmmac: selftests: Implement the ARP Offload test")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yongqiang Liu [Wed, 7 Dec 2022 07:20:45 +0000 (07:20 +0000)]
net: defxx: Fix missing err handling in dfx_init()
[ Upstream commit
ae18dcdff0f8d7e84cd3fd9f496518b5e72d185d ]
When eisa_driver_register() or tc_register_driver() failed,
the modprobe defxx would fail with some err log as follows:
Error: Driver 'defxx' is already registered, aborting...
Fix this issue by adding err hanling in dfx_init().
Fixes:
e89a2cfb7d7b5 ("[TC] defxx: TURBOchannel support")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Artem Chernyshev [Tue, 6 Dec 2022 06:58:34 +0000 (09:58 +0300)]
net: vmw_vsock: vmci: Check memcpy_from_msg()
[ Upstream commit
44aa5a6dba8283bfda28b1517af4de711c5652a4 ]
vmci_transport_dgram_enqueue() does not check the return value
of memcpy_from_msg(). If memcpy_from_msg() fails, it is possible that
uninitialized memory contents are sent unintentionally instead of user's
message in the datagram to the destination. Return with an error if
memcpy_from_msg() fails.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
0f7db23a07af ("vmci_transport: switch ->enqeue_dgram, ->enqueue_stream and ->dequeue_stream to msghdr")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Wed, 23 Nov 2022 03:16:22 +0000 (11:16 +0800)]
clk: socfpga: Fix memory leak in socfpga_gate_init()
[ Upstream commit
0b8ba891ad4d1ef6bfa4c72efc83f9f9f855f68b ]
Free @socfpga_clk and @ops on the error path to avoid memory leak issue.
Fixes:
a30a67be7b6e ("clk: socfpga: Don't have get_parent for single parent ops")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123031622.63171-1-xiujianfeng@huawei.com
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Björn Töpel [Wed, 7 Dec 2022 10:35:40 +0000 (11:35 +0100)]
bpf: Do not zero-extend kfunc return values
[ Upstream commit
d35af0a7feb077c43ff0233bba5a8c6e75b73e35 ]
In BPF all global functions, and BPF helpers return a 64-bit
value. For kfunc calls, this is not the case, and they can return
e.g. 32-bit values.
The return register R0 for kfuncs calls can therefore be marked as
subreg_def != DEF_NOT_SUBREG. In general, if a register is marked with
subreg_def != DEF_NOT_SUBREG, some archs (where bpf_jit_needs_zext()
returns true) require the verifier to insert explicit zero-extension
instructions.
For kfuncs calls, however, the caller should do sign/zero extension
for return values. In other words, the compiler is responsible to
insert proper instructions, not the verifier.
An example, provided by Yonghong Song:
$ cat t.c
extern unsigned foo(void);
unsigned bar1(void) {
return foo();
}
unsigned bar2(void) {
if (foo()) return 10; else return 20;
}
$ clang -target bpf -mcpu=v3 -O2 -c t.c && llvm-objdump -d t.o
t.o: file format elf64-bpf
Disassembly of section .text:
0000000000000000 <bar1>:
0: 85 10 00 00 ff ff ff ff call -0x1
1: 95 00 00 00 00 00 00 00 exit
0000000000000010 <bar2>:
2: 85 10 00 00 ff ff ff ff call -0x1
3: bc 01 00 00 00 00 00 00 w1 = w0
4: b4 00 00 00 14 00 00 00 w0 = 0x14
5: 16 01 01 00 00 00 00 00 if w1 == 0x0 goto +0x1 <LBB1_2>
6: b4 00 00 00 0a 00 00 00 w0 = 0xa
0000000000000038 <LBB1_2>:
7: 95 00 00 00 00 00 00 00 exit
If the return value of 'foo()' is used in the BPF program, the proper
zero-extension will be done.
Currently, the verifier correctly marks, say, a 32-bit return value as
subreg_def != DEF_NOT_SUBREG, but will fail performing the actual
zero-extension, due to a verifier bug in
opt_subreg_zext_lo32_rnd_hi32(). load_reg is not properly set to R0,
and the following path will be taken:
if (WARN_ON(load_reg == -1)) {
verbose(env, "verifier bug. zext_dst is set, but no reg is defined\n");
return -EFAULT;
}
A longer discussion from v1 can be found in the link below.
Correct the verifier by avoiding doing explicit zero-extension of R0
for kfunc calls. Note that R0 will still be marked as a sub-register
for return values smaller than 64-bit.
Fixes:
83a2881903f3 ("bpf: Account for BPF_FETCH in insn_has_def32()")
Link: https://lore.kernel.org/bpf/20221202103620.1915679-1-bjorn@kernel.org/
Suggested-by: Yonghong Song <yhs@meta.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221207103540.396496-1-bjorn@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Tue, 22 Nov 2022 04:04:10 +0000 (12:04 +0800)]
blktrace: Fix output non-blktrace event when blk_classic option enabled
[ Upstream commit
f596da3efaf4130ff61cd029558845808df9bf99 ]
When the blk_classic option is enabled, non-blktrace events must be
filtered out. Otherwise, events of other types are output in the blktrace
classic format, which is unexpected.
The problem can be triggered in the following ways:
# echo 1 > /sys/kernel/debug/tracing/options/blk_classic
# echo 1 > /sys/kernel/debug/tracing/events/enable
# echo blk > /sys/kernel/debug/tracing/current_tracer
# cat /sys/kernel/debug/tracing/trace_pipe
Fixes:
c71a89615411 ("blktrace: add ftrace plugin")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20221122040410.85113-1-yangjihong1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wang Yufen [Fri, 2 Dec 2022 05:35:42 +0000 (13:35 +0800)]
wifi: brcmfmac: Fix error return code in brcmf_sdio_download_firmware()
[ Upstream commit
c2f2924bc7f9ea75ef8d95863e710168f8196256 ]
Fix to return a negative error code instead of 0 when
brcmf_chip_set_active() fails. In addition, change the return
value for brcmf_pcie_exit_download_state() to keep consistent.
Fixes:
d380ebc9b6fb ("brcmfmac: rename chip download functions")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1669959342-27144-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bitterblue Smith [Thu, 1 Dec 2022 14:15:08 +0000 (16:15 +0200)]
wifi: rtl8xxxu: Fix the channel width reporting
[ Upstream commit
76c16af2cb10282274596e21add2c9f0b95c941b ]
The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver
reports about the TX rate, and the driver passes these reports to
sta_statistics. The reports from RTL8192EU may or may not include the
channel width. The reports from RTL8188FU do not include it.
Only access the c2h->ra_report.bw field if the report (skb) is big
enough.
The other problem fixed here is that the code was actually never
changing the channel width initially reported by
rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.
Fixes:
0985d3a410ac ("rtl8xxxu: Feed current txrate information for mac80211")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5b41f1ae-72e7-6b7a-2459-b736399a1c40@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bitterblue Smith [Thu, 1 Dec 2022 14:13:57 +0000 (16:13 +0200)]
wifi: rtl8xxxu: Add __packed to struct rtl8723bu_c2h
[ Upstream commit
dd469a754afdb782ba3033cee102147493dc39f4 ]
This struct is used to access a sequence of bytes received from the
wifi chip. It must not have any padding bytes between the members.
This doesn't change anything on my system, possibly because currently
none of the members need more than byte alignment.
Fixes:
b2b43b7837ba ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1a270918-da22-ff5f-29fc-7855f740c5ba@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kris Bahnsen [Wed, 7 Dec 2022 23:08:53 +0000 (15:08 -0800)]
spi: spi-gpio: Don't set MOSI as an input if not 3WIRE mode
[ Upstream commit
3a6f994f848a69deb2bf3cd9d130dd0c09730e55 ]
The addition of 3WIRE support would affect MOSI direction even
when still in standard (4 wire) mode. This can lead to MOSI being
at an invalid logic level when a device driver sets an SPI
message with a NULL tx_buf.
spi.h states that if tx_buf is NULL then "zeros will be shifted
out ... " If MOSI is tristated then the data shifted out is subject
to pull resistors, keepers, or in the absence of those, noise.
This issue came to light when using spi-gpio connected to an
ADS7843 touchscreen controller. MOSI pulled high when clocking
MISO data in caused the SPI device to interpret this as a command
which would put the device in an unexpected and non-functional
state.
Fixes:
4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support")
Fixes:
5132b3d28371 ("spi: gpio: Support 3WIRE high-impedance turn-around")
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://lore.kernel.org/r/20221207230853.6174-1-kris@embeddedTS.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xiu Jianfeng [Wed, 23 Nov 2022 03:20:15 +0000 (11:20 +0800)]
clk: samsung: Fix memory leak in _samsung_clk_register_pll()
[ Upstream commit
5174e5b0d1b669a489524192b6adcbb3c54ebc72 ]
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it.
Fixes:
3ff6e0d8d64d ("clk: samsung: Add support to register rate_table for samsung plls")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20221123032015.63980-1-xiujianfeng@huawei.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Mon, 21 Nov 2022 15:58:33 +0000 (16:58 +0100)]
media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
[ Upstream commit
faaf901727eddcfbe889fe172ec9cdb5e63c8236 ]
By moving support for the USB Syntek DC1125 Camera to staging, the
dependencies on MEDIA_USB_SUPPORT and MEDIA_CAMERA_SUPPORT were lost.
Fixes:
56280c64ecac ("media: stkwebcam: deprecate driver, move to staging")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>