review.tizen.org Git - platform/kernel/linux-starfive.git/log

drm: Add missing DP DSC extended capability definitions.

[ Upstream commit 1482ec00be4a3634aeffbcc799791a723df69339 ]

Adding DP DSC register definitions, we might need for further
DSC implementation, supporting MST and DP branch pass-through mode.

v2: - Fixed checkpatch comment warning
v3: - Removed function which is not yet used(Jani Nikula)

Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221101094222.22091-2-stanislav.lisovskiy@intel.com
Stable-dep-of: 13525645e224 ("drm/dsc: fix drm_edp_dsc_sink_output_bpp() DPCD high byte usage")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: fix racy issue from smb2 close and logoff with multichannel

[ Upstream commit abcc506a9a71976a8b4c9bf3ee6efd13229c1e19 ]

When smb client send concurrent smb2 close and logoff request
with multichannel connection, It can cause racy issue. logoff request
free tcon and can cause UAF issues in smb2 close. When receiving logoff
request with multichannel, ksmbd should wait until all remaning requests
complete as well as ones in the current connection, and then make
session expired.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20796 ZDI-CAN-20595
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: block asynchronous requests when making a delay on session setup

[ Upstream commit b096d97f47326b1e2dbdef1c91fab69ffda54d17 ]

ksmbd make a delay of 5 seconds on session setup to avoid dictionary
attacks. But the 5 seconds delay can be bypassed by using asynchronous
requests. This patch block all requests on current connection when
making a delay on sesstion setup failure.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20482
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: destroy expired sessions

[ Upstream commit ea174a91893956450510945a0c5d1a10b5323656 ]

client can indefinitely send smb2 session setup requests with
the SessionId set to 0, thus indefinitely spawning new sessions,
and causing indefinite memory usage. This patch limit to the number
of sessions using expired timeout and session state.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20478
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: fix racy issue from session setup and logoff

[ Upstream commit f5c779b7ddbda30866cf2a27c63e34158f858c73 ]

This racy issue is triggered by sending concurrent session setup and
logoff requests. This patch does not set connection status as
KSMBD_SESS_GOOD if state is KSMBD_SESS_NEED_RECONNECT in session setup.
And relookup session to validate if session is deleted in logoff.

Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20481, ZDI-CAN-20590, ZDI-CAN-20596
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: Implements sess->ksmbd_chann_list as xarray

[ Upstream commit 1d9c4172110e645b383ff13eee759728d74f1a5d ]

For some ops on channel:
1. lookup_chann_list(), possibly on high frequency.
2. ksmbd_chann_del().

Connection is used as indexing key to lookup channel, in that case,
linear search based on list may suffer a bit for performance.

Implements sess->ksmbd_chann_list as xarray.

Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: f5c779b7ddbd ("ksmbd: fix racy issue from session setup and logoff")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Change default Z8 watermark values

[ Upstream commit 8f586cc16c1fc3c2202c9d54563db8c7ed365f82 ]

[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Update Z8 SR exit/enter latencies

[ Upstream commit 9b0f51e8449f6f76170fda6a8dd9c417a43ce270 ]

[Why]
Request from HW team to update the latencies to the new measured values.

[How]
Update the values in the bounding box.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 8f586cc16c1f ("drm/amd/display: Change default Z8 watermark values")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Update Z8 watermarks for DCN314

[ Upstream commit fa24e116f1ce3dcc55474f0b6ab0cac4e3ee34e1 ]

[Why & How]
Update from HW, need to lower watermarks for enter/enter+exit latency.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 8f586cc16c1f ("drm/amd/display: Change default Z8 watermark values")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: wcd938x: fix accessing regmap on unattached devices

[ Upstream commit 84822215acd15bd86a7759a835271e63bba83a7b ]

The WCD938x comes with three devices on two Linux drivers:
1. RX Soundwire device (wcd938x-sdw.c driver),
2. TX Soundwire device, which is used to access devices via regmap (also
   wcd938x-sdw.c driver),
3. platform device (wcd938x.c driver) - glue and component master,
   actually having most of the code using TX Soundwire device regmap.

When RX and TX Soundwire devices probe, the component master (platform
device) bind tries to write micbias configuration via TX Soundwire
regmap.  This might happen before TX Soundwire enumerates, so the regmap
access fails.  On Qualcomm SM8550 board with WCD9385:

  qcom-soundwire 6d30000.soundwire-controller: Qualcomm Soundwire controller v2.0.0 Registered
  wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:4 (ops wcd938x_sdw_component_ops)
  wcd938x_codec audio-codec: bound sdw:0:0217:010d:00:3 (ops wcd938x_sdw_component_ops)
  qcom-soundwire 6ad0000.soundwire-controller: swrm_wait_for_wr_fifo_avail err write overflow

Fix the issue by:
1. Moving the regmap creation from platform device to TX Soundwire
   device.  The regmap settings are moved as-is with one difference:
   making the wcd938x_regmap_config const.
2. Using regmap in cache only mode till the actual TX Soundwire device
   enumerates and then sync the regmap cache.

Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Message-Id: <20230503144102.242240-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: codecs: constify static sdw_slave_ops struct

[ Upstream commit 65b7b869da9bd3bd0b9fa60e6fe557bfbc0a75e8 ]

The struct sdw_slave_ops is not modified and sdw_driver takes pointer to
const, so make it a const for code safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124163953.345949-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 84822215acd1 ("ASoC: codecs: wcd938x: fix accessing regmap on unattached devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt1318: Add RT1318 SDCA vendor-specific driver

[ Upstream commit 6ad73a2b42ea6d43fc5bf32033e8f6b21df3109e ]

This is the initial amplifier driver for rt1318 SDCA version.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221108092727.13011-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 84822215acd1 ("ASoC: codecs: wcd938x: fix accessing regmap on unattached devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Lowering min Z8 residency time

[ Upstream commit d893f39320e1248d1c97fde0d6e51e5ea008a76b ]

[Why & How]
Per HW team request, we're lowering the minimum Z8
residency time to 2000us. This enables Z8 support for additional
modes we were previously blocking like 2k>60hz

Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Update minimum stutter residency for DCN314 Z8

[ Upstream commit 0215ce9057edf69aff9c1a32f4254e1ec297db31 ]

[Why]
Block periods that are too short as they have the potential to
currently cause hangs in other firmware components on the system.

[How]
Update the threshold, mostly targeting a block of 4k and downscaling.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add minimum Z8 residency debug option

[ Upstream commit 0db13eae41fcc67f408dbb3dfda59633c4fa03fb ]

[Why]
Allows finer control and tuning for debug and profiling.

[How]
Add the debug option into DC. The default remains the same as before
for now.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix Z8 support configurations

[ Upstream commit 73dd4ca4b5a01235607231839bd351bbef75a1d2 ]

[Why]
It's not supported in multi-display, but it is supported in 2nd eDP
screen only.

[How]
Remove multi display support, restrict number of planes for all
z-states support, but still allow Z8 if we're not using PWRSEQ0.

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add debug option to skip PSR CRTC disable

[ Upstream commit 00812bfc7bcb02faf127ee05f6ac27a5581eb701 ]

[Why]
It's currently tied to Z10 support, and is required for Z10, but
we can still support Z10 display off without PSR.

We currently need to skip the PSR CRTC disable to prevent stuttering
and underflow from occuring during PSR-SU.

[How]
Add a debug option to allow specifying this separately.

Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Add Z8 allow states to z-state support list

[ Upstream commit 80676936805e46c79c38008e5142a77a1b2f2dc7 ]

[Why]
Even if we block Z9 based on crossover threshold it's possible to
allow for Z8.

[How]
There's support for this on DCN314, so update the support types to
include a z8 only and z8_z10 only state.

Update the decide_zstate_support function to allow for specifying
these modes based on the Z8 threshold.

DCN31 has z-state disabled, but still update the legacy code to
map z8_only = disallow and z10_z8_only = z10_only to keep the support
the same.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Brian Chang <Brian.Chang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Refactor eDP PSR codes

[ Upstream commit bd829d5707730072fecc3267016a675a4789905b ]

We split out PSR config from "global" to "per-panel" config settings.

Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: d893f39320e1 ("drm/amd/display: Lowering min Z8 residency time")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Check pipe source size when using skl+ scalers

[ Upstream commit d944eafed618a8507270b324ad9d5405bb7f0b3e ]

The skl+ scalers only sample 12 bits of PIPESRC so we can't
do any plane scaling at all when the pipe source size is >4k.

Make sure the pipe source size is also below the scaler's src
size limits. Might not be 100% accurate, but should at least be
safe. We can refine the limits later if we discover that recent
hw is less restricted.

Cc: stable@vger.kernel.org
Tested-by: Ross Zwisler <zwisler@google.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8357
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230418175528.13117-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 691248d4135fe3fae64b4ee0676bc96a7fd6950c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/mtl: update scaler source and destination limits for MTL

[ Upstream commit f840834a8b60ffd305f03a53007605ba4dfbbc4b ]

The max source and destination limits for scalers in MTL have changed.
Use the new values accordingly.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221223130509.43245-3-luciano.coelho@intel.com
Stable-dep-of: d944eafed618 ("drm/i915: Check pipe source size when using skl+ scalers")
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: rtw88: rtw8821c: Fix rfe_option field width

[ Upstream commit 14705f969d98187a1cc2682e0c9bd2e230b8098f ]

On my RTW8821CU chipset rfe_option reads as 0x22. Looking at the
vendor driver suggests that the field width of rfe_option is 5 bit,
so rfe_option should be masked with 0x1f.

Without this the rfe_option comparisons with 2 further down the
driver evaluate as false when they should really evaluate as true.
The effect is that 2G channels do not work.

rfe_option is also used as an array index into rtw8821c_rfe_defs[].
rtw8821c_rfe_defs[34] (0x22) was added as part of adding USB support,
likely because rfe_option reads as 0x22. As this now becomes 0x2,
rtw8821c_rfe_defs[34] is no longer used and can be removed.

Note that this might not be the whole truth. In the vendor driver
there are indeed places where the unmasked rfe_option value is used.
However, the driver has several places where rfe_option is tested
with the pattern if (rfe_option == 2 || rfe_option == 0x22) or
if (rfe_option == 4 || rfe_option == 0x24), so that rfe_option BIT(5)
has no influence on the code path taken. We therefore mask BIT(5)
out from rfe_option entirely until this assumption is proved wrong
by some chip variant we do not know yet.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: ValdikSS <iam@valdikss.org.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230417140358.2240429-3-s.hauer@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/loongson-eiointc: Fix registration of syscore_ops

[ Upstream commit bdd60211eebb43ba1c4c14704965f4d4b628b931 ]

When support suspend/resume for loongson-eiointc, the syscore_ops
is registered twice in dual-bridges machines where there are two
eiointc IRQ domains. Repeated registration of an same syscore_ops
broke syscore_ops_list. Also, cpuhp_setup_state_nocalls is only
needed to call for once. So the patch will corret them.

Fixes: a90335c2dfb4 ("irqchip/loongson-eiointc: Add suspend/resume support")
Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-4-lvjianmin@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent

[ Upstream commit 64cc451e45e146b2140211b4f45f278b93b24ac0 ]

In eiointc_acpi_init(), a *eiointc* node is passed into
acpi_get_vec_parent() instead of a required *NUMA* node (on some chip
like 3C5000L, a *NUMA* node means a *eiointc* node, but on some chip
like 3C5000, a *NUMA* node contains 4 *eiointc* nodes), and node in
struct acpi_vector_group is essentially a *NUMA* node, which will
lead to no parent matched for passed *eiointc* node. so the patch
adjusts code to use *NUMA* node for parameter node of
acpi_set_vec_parent/acpi_get_vec_parent.

Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-3-lvjianmin@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/loongarch: Adjust acpi_cascade_irqdomain_init() and sub-routines

[ Upstream commit 3d12938dbc048ecb193fec69898d95f6b4813a4b ]

1, Adjust the return of acpi_cascade_irqdomain_init() and check its
return value.
2, Combine unnecessary short lines to one long line.

Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221020142514.1725514-1-chenhuacai@loongson.cn
Stable-dep-of: 64cc451e45e1 ("irqchip/loongson-eiointc: Fix incorrect use of acpi_get_vec_parent")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: fix missing wq allocation error handling

[ Upstream commit ca090c837b430752038b24e56dd182010d77f6f6 ]

Add the missing sanity check to handle workqueue allocation failures.

Fixes: c8afe684c95c ("drm/msm: basic KMS driver for snapdragon")
Cc: stable@vger.kernel.org # 3.12
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525102/
Link: https://lore.kernel.org/r/20230306100722.28485-8-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Hangcheck progress detection

[ Upstream commit d73b1d02de0858b96f743e1e8b767fb092ae4c1b ]

If the hangcheck timer expires, check if the fw's position in the
cmdstream has advanced (changed) since last timer expiration, and
allow it up to three additional "extensions" to it's alotted time.
The intention is to continue to catch "shader stuck in a loop" type
hangs quickly, but allow more time for things that are actually
making forward progress.

Because we need to sample the CP state twice to detect if there has
not been progress, this also cuts the the timer's duration in half.

v2: Fix typo (REG_A6XX_CP_CSQ_IB2_STAT), add comment
v3: Only halve hangcheck timer duration for generations which
    support progress detection (hdanton); removed unused a5xx
    progress (without knowing how to adjust for data buffered
    in ROQ it is too likely to report a false negative)
v4: Comment updates to better describe the total hangcheck
    duration when progress detection is applied

Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com> # dEQP-GLES2.functional.flush_finish.wait
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511584/
Link: https://lore.kernel.org/r/20221114193049.1533391-3-robdclark@gmail.com
Stable-dep-of: ca090c837b43 ("drm/msm: fix missing wq allocation error handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: Simplify read64/write64 helpers

[ Upstream commit cade05b2a88558847984287dd389fae0c7de31d6 ]

The _HI reg is always following the _LO reg, so no need to pass these
offsets seprately.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/511581/
Link: https://lore.kernel.org/r/20221114193049.1533391-2-robdclark@gmail.com
Stable-dep-of: ca090c837b43 ("drm/msm: fix missing wq allocation error handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: factor out victim_entry usage from general rb_tree use

[ Upstream commit 043d2d00b44310f84c0593c63e51fae88c829cdd ]

Let's reduce the complexity of mixed use of rb_tree in victim_entry from
extent_cache and discard_cmd.

This should fix arm32 memory alignment issue caused by shared rb_entry.

[struct victim_entry]              [struct rb_entry]
[0] struct rb_node rb_node;        [0] struct rb_node rb_node;
                                       union {
                                         struct {
                                           unsigned int ofs;
                                           unsigned int len;
                                         };
[16] unsigned long long mtime;     [12] unsigned long long key;
                                       } __packed;

Cc: <stable@vger.kernel.org>
Fixes: 093749e296e2 ("f2fs: support age threshold based garbage collection")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: allocate the extent_cache by default

[ Upstream commit 72840cccc0a1a0a0dc1bb27b669a9111be6d0f6a ]

Let's allocate it to remove the runtime complexity.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 043d2d00b443 ("f2fs: factor out victim_entry usage from general rb_tree use")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: refactor extent_cache to support for read and more

[ Upstream commit e7547daccd6a37522f0af74ec4b5a3036f3dd328 ]

This patch prepares extent_cache to be ready for addition.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 043d2d00b443 ("f2fs: factor out victim_entry usage from general rb_tree use")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: remove unnecessary __init_extent_tree

[ Upstream commit 749d543c0d451fff31e8f7a3e0a031ffcbf1ebb1 ]

Added into the caller.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 043d2d00b443 ("f2fs: factor out victim_entry usage from general rb_tree use")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: move internal functions into extent_cache.c

[ Upstream commit 3bac20a8f011b8ed4012b43f4f33010432b3c647 ]

No functional change.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 043d2d00b443 ("f2fs: factor out victim_entry usage from general rb_tree use")
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: specify extent cache for read explicitly

[ Upstream commit 12607c1ba7637e750402f555b6695c50fce77a2b ]

Let's descrbie it's read extent cache.

Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 043d2d00b443 ("f2fs: factor out victim_entry usage from general rb_tree use")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/adreno: adreno_gpu: Use suspend() instead of idle() on load error

commit 3eeca5e5f3100435b06a5b5d86daa3d135a8a4bd upstream.

The adreno_load_gpu() path is guarded by an error check on
adreno_load_fw(). This function is responsible for loading
Qualcomm-only-signed binaries (e.g. SQE and GMU FW for A6XX), but it
does not take the vendor-signed ZAP blob into account.

By embedding the SQE (and GMU, if necessary) firmware into the
initrd/kernel, we can trigger and unfortunate path that would not bail
out early and proceed with gpu->hw_init(). That will fail, as the ZAP
loader path will not find the firmware and return back to
adreno_load_gpu().

This error path involves pm_runtime_put_sync() which then calls idle()
instead of suspend(). This is suboptimal, as it means that we're not
going through the clean shutdown sequence. With at least A619_holi, this
makes the GPU not wake up until it goes through at least one more
start-fail-stop cycle. The pm_runtime_put_sync that appears in the error
path actually does not guarantee that because of the earlier enabling of
runtime autosuspend.

Fix that by using pm_runtime_put_sync_suspend to force a clean shutdown.

Test cases:
1. All firmware baked into kernel
2. error loading ZAP fw in initrd -> load from rootfs at DE start

Both succeed on A619_holi (SM6375) and A630 (SDM845).

Fixes: 0d997f95b70f ("drm/msm/adreno: fix runtime PM imbalance at gpu load")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/530001/
Link: https://lore.kernel.org/r/20230330231517.2747024-1-konrad.dybcio@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/ntfs3: Refactoring of various minor issues

commit 6827d50b2c430c329af442b64c9176d174f56521 upstream.

Removed unused macro.
Changed null pointer checking.
Fixed inconsistent indenting.

Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Cc: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: insert timestamp to packed Bluetooth (BT) events

commit 17d793f3ed53080dab6bbeabfc82de890c901001 upstream.

To fully utilize the BT polling/refresh rate, a few input events
are sent together to reduce event delay. This causes issue to the
timestamp generated by input_sync since all the events in the same
packet would pretty much have the same timestamp. This patch inserts
time interval to the events by averaging the total time used for
sending the packet.

This decision was mainly based on observing the actual time interval
between each BT polling. The interval doesn't seem to be constant,
due to the network and system environment. So, using solutions other
than averaging doesn't end up with valid timestamps.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: wacom: Set a default resolution for older tablets

commit 08a46b4190d345544d04ce4fe2e1844b772b8535 upstream.

Some older tablets may not report physical maximum for X/Y
coordinates. Set a default to prevent undefined resolution.

Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Link: https://lore.kernel.org/r/20230409164229.29777-1-ping.cheng@wacom.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Use `amdgpu_ucode_*` helpers for MES

commit 11e0b0067ec0707e8e598a5f9a547ab618ae7982 upstream.

The `amdgpu_ucode_request` helper will ensure that the return code for
missing firmware is -ENODEV so that early_init can fail.

The `amdgpu_ucode_release` helper provides symmetry for releasing firmware.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Add a new helper for loading/validating microcode

commit 2210af50ae7f4104269dfde7bafbbfbacdbe1a2b upstream.

All microcode runs a basic validation after it's been loaded. Each
IP block as part of init will run both.

Introduce a wrapper for request_firmware and amdgpu_ucode_validate.
This wrapper will also remap any error codes from request_firmware
to -ENODEV. This is so that early_init will fail if firmware couldn't
be loaded instead of the IP block being disabled.

Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd: Load MES microcode during early_init

commit cc42e76e7de5190a7da5dac9d7b2bbb458e050bf upstream.

Add an early_init phase to MES for fetching and validating microcode
from the filesystem.

If MES microcode is required but not available during early init, the
firmware framebuffer will have already been released and the screen will
freeze.

Move the request for MES microcode into the early_init phase
so that if it's not available, early_init will fail.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: remove deprecated MES version vars

commit 6040517e4a29d3828160c571681eec9ffe10043f upstream.

MES scheduler and kiq versions are stored in mes.sched_version and
mes.kiq_version, respectively, which are read from a register after
their queues are initialized. Remove mes.ucode_fw_version and
mes.data_fw_version which tried to read this versioning info from the
firmware headers (which don't contain this information).

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: avoid potential UBSAN issue on legacy asics

commit 5247f05eadf1081a74b2233f291cee2efed25e3a upstream.

Prevent further dpm casting on legacy asics without od_enabled in
amdgpu_dpm_is_overdrive_supported. This can avoid UBSAN complain
in init sequence.

v2: add a macro to check legacy dpm instead of checking asic family/type
v3: refine macro name for naming consistency

Suggested-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend

commit 8b229ada2669b74fdae06c83fbfda5a5a99fc253 upstream.

sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.

[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS:  0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046]  <TASK>
[ 7283.167048]  sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704]  amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296]  amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875]  amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464]  pci_pm_freeze+0x54/0xc0

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: parse pp_handle under appropriate conditions

commit 58d9b9a14b47c2a3da6effcbb01607ad7edc0275 upstream.

amdgpu_dpm_is_overdrive_supported is a common API across all
asics, so we should cast pp_handle into correct structure
under different power frameworks.

v2: using return directly to simplify code
v3: SI asic does not carry od_enabled member in pp_handle, and update Fixes tag

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2541
Fixes: eb4900aa4c49 ("drm/amdgpu: Fix kernel NULL pointer dereference in dpm functions")
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Enforce 60us prefetch for 200Mhz DCFCLK modes

commit b504f99ccaa64da364443431e388ecf30b604e38 upstream.

[Description]
- Due to bandwidth / arbitration issues at 200Mhz DCFCLK,
  we want to enforce minimum 60us of prefetch to avoid
  intermittent underflow issues
- Since 60us prefetch is already enforced for UCLK DPM0,
  and many DCFCLK's > 200Mhz are mapped to UCLK DPM1, in
  theory there should not be any UCLK DPM regressions by
  enforcing greater prefetch

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: Fix vram recover doesn't work after whole GPU reset (v2)

commit 6c032c37ac3ef3b7df30937c785ecc4da428edc0 upstream.

v1: Vmbo->shadow is used to back vram bo up when vram lost. So that we
should set shadow as vmbo->shadow to recover vmbo->bo
v2: Modify if(vmbo->shadow) shadow = vmbo->shadow as if(!vmbo->shadow)
continue;

Fixes: e18aaea733da ("drm/amdgpu: move shadow_list to amdgpu_bo_vm")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: change gfx 11.0.4 external_id range

commit 996e93a3fe74dcf9d467ae3020aea42cc3ff65e3 upstream.

gfx 11.0.4 range starts from 0x80.

Fixes: 311d52367d0a ("drm/amdgpu: add soc21 common ip block support for GC 11.0.4")
Cc: stable@vger.kernel.org
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: Yogesh Mohan Marimuthu <Yogesh.Mohanmarimuthu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/jpeg: Remove harvest checking for JPEG3

commit 5b94db73e45e2e6c2840f39c022fd71dfa47fc58 upstream.

Register CC_UVD_HARVESTING is obsolete for JPEG 3.1.2

Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras

commit 4a76680311330aefe5074bed8f06afa354b85c48 upstream.

gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert.
So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq
should be executed under such condition, otherwise, an amdgpu_irq_put
calltrace will occur.

[ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246
[ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000
[ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000
[ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006
[ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050
[ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.170978] FS:  0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.170981] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.170986] Call Trace:
[ 7283.170988]  <TASK>
[ 7283.170989]  gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu]
[ 7283.171655]  amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.172245]  amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.172823]  amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.173412]  pci_pm_freeze+0x54/0xc0
[ 7283.173419]  ? __pfx_pci_pm_freeze+0x10/0x10
[ 7283.173425]  dpm_run_callback+0x98/0x200
[ 7283.173430]  __device_suspend+0x164/0x5f0

v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking)

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini

commit 13af556104fa93b1945c70bbf8a0a62cd2c92879 upstream.

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.

[  102.980303] Call Trace:
[  102.980303]  <TASK>
[  102.980304]  gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[  102.980357]  gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[  102.980409]  amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[  102.980459]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[  102.980520]  amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[  102.980573]  amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[  102.980687]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[  102.980740]  process_one_work+0x21f/0x3f0
[  102.980741]  worker_thread+0x200/0x3e0
[  102.980742]  ? process_one_work+0x3f0/0x3f0
[  102.980743]  kthread+0xfd/0x130
[  102.980743]  ? kthread_complete_and_exit+0x20/0x20
[  102.980744]  ret_from_fork+0x22/0x30

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()

commit 922a76ba31adf84e72bc947267385be420c689ee upstream.

As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini

commit 08c677cb0b436a96a836792bb35a8ec5de4999c2 upstream.

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.

[   82.340264] Call Trace:
[   82.340265]  <TASK>
[   82.340269]  gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[   82.340447]  gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[   82.340623]  amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[   82.340789]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[   82.340955]  amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[   82.341122]  amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[   82.341359]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[   82.341529]  process_one_work+0x21d/0x3f0
[   82.341535]  worker_thread+0x1fa/0x3c0
[   82.341538]  ? process_one_work+0x3f0/0x3f0
[   82.341540]  kthread+0xff/0x130
[   82.341544]  ? kthread_complete_and_exit+0x20/0x20
[   82.341547]  ret_from_fork+0x22/0x30

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b5709 ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix flickering caused by S/G mode

commit 08da182175db4c7f80850354849d95f2670e8cd9 upstream.

Currently, on a handful of ASICs. We allow the framebuffer for a given
plane to exist in either VRAM or GTT. However, if the plane's new
framebuffer is in a different memory domain than it's previous
framebuffer, flipping between them can cause the screen to flicker. So,
to fix this, don't perform an immediate flip in the aforementioned case.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Reviewed-by: Roman Li <Roman.Li@amd.com>
Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)")
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: filter out invalid bits in pipe_fuses

commit 682439fffad9fa9a38d37dd1b1318e9374232213 upstream.

[Why]
Reading pipe_fuses from register may have invalid bits set, which may
affect the num_pipes erroneously.

[How]
Add read_pipes_fuses() call and filter bits based on expected number
of pipes.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix 4to1 MPC black screen with DPP RCO

commit bf224e00a9f54e2bf14b4d720a09c3d2f4aa4aa8 upstream.

[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.

This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.

[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.

The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled

Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Add NULL plane_state check for cursor disable logic

commit d29fb7baab09b6a1dc484c9c67933253883e770a upstream.

[Why]
While scanning the top_pipe connections we can run into a case where
the bottom pipe is still connected to a top_pipe but with a NULL
plane_state.

[How]
Treat a NULL plane_state the same as the plane being invisible for
pipe cursor disable logic.

Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panel: otm8009a: Set backlight parent to panel device

commit ab4f869fba6119997f7630d600049762a2b014fa upstream.

This is the logical place to put the backlight device, and it also
fixes a kernel crash if the MIPI host is removed. Previously the
backlight device would be unregistered twice when this happened - once
as a child of the MIPI host through `mipi_dsi_host_unregister`, and
once when the panel device is destroyed.

Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Cc: stable@vger.kernel.org
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/loongson-eiointc: Fix returned value on parsing MADT

commit 112eaa8fec5ea75f1be003ec55760b09a86799f8 upstream.

In pch_pic_parse_madt(), a NULL parent pointer will be
returned from acpi_get_vec_parent() for second pch-pic domain
related to second bridge while calling eiointc_acpi_init() at
first time, where the parent of it has not been initialized
yet, and will be initialized during second time calling
eiointc_acpi_init(). So, it's reasonable to return zero so
that failure of acpi_table_parse_madt() will be avoided, or else
acpi_cascade_irqdomain_init() will return and initialization of
followed pch_msi domain will be skipped.

Although it does not matter when pch_msi_parse_madt() returns
-EINVAL if no invalid parent is found, it's also reasonable to
return zero for that.

Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-2-lvjianmin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/loongson-pch-pic: Fix pch_pic_acpi_init calling

commit 48ce2d722f7f108f27bedddf54bee3423a57ce57 upstream.

For dual-bridges scenario, pch_pic_acpi_init() will be called
in following path:

cpuintc_acpi_init
  acpi_cascade_irqdomain_init(in cpuintc driver)
    acpi_table_parse_madt
      eiointc_parse_madt
        eiointc_acpi_init /* this will be called two times
                             correspondingto parsing two
                             eiointc entries in MADT under
                             dual-bridges scenario*/
          acpi_cascade_irqdomain_init(in eiointc driver)
            acpi_table_parse_madt
              pch_pic_parse_madt
                pch_pic_acpi_init /* this will be called depend
                                     on valid parent IRQ domain
                                     handle for one or two times
                                     corresponding to parsing
                                     two pchpic entries in MADT
                                     druring calling
                                     eiointc_acpi_init() under
                                     dual-bridges scenario*/

During the first eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called just one time since only
one valid parent IRQ domain handle will be found for current
eiointc IRQ domain.

During the second eiointc_acpi_init() calling, the
pch_pic_acpi_init() will be called two times since two valid
parent IRQ domain handles will be found. So in pch_pic_acpi_init(),
we must have a reasonable way to prevent from creating second same
pch_pic IRQ domain.

The patch matches gsi base information in created pch_pic IRQ
domains to check if the target domain has been created to avoid the
bug mentioned above.

Cc: stable@vger.kernel.org
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230407083453.6305-6-lvjianmin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix potential corruption when moving a directory

commit d94772154e524b329a168678836745d2773a6e02 upstream.

F2FS has the same issue in ext4_rename causing crash revealed by
xfstests/generic/707.

See also commit 0813299c586b ("ext4: Fix possible corruption when moving a directory")

CC: stable@vger.kernel.org
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block

commit da6ea0b050fa720302b56fbb59307e7c7531a342 upstream.

We got a kernel panic if old_addr is NULL.

https://bugzilla.kernel.org/show_bug.cgi?id=217266

BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
  <TASK>
  f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
  __f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
  ? vfs_write+0x2ae/0x3f0
  ? vfs_write+0x2ae/0x3f0
  __x64_sys_ioctl+0x91/0xd0
  do_syscall_64+0x5c/0x90
  entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f69095fe53f

Fixes: 2f3a9ae990a7 ("f2fs: introduce trace_f2fs_replace_atomic_write_block")
Cc: <stable@vger.kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()

commit c8c2969bfcba5fcba3a5b078315c1b586d927d9f upstream.

The intel_dsi_msleep() helper skips sleeping if the MIPI-sequences have
a version of 3 or newer and the panel is in vid-mode.

This is based on the big comment around line 730 which starts with
"Panel enable/disable sequences from the VBT spec.", where
the "v3 video mode seq" column does not have any wait t# entries.

Checking the Windows driver shows that it does always honor
the VBT delays independent of the version of the VBT sequences.

Commit 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for
the panel_on_delay when there is no reset-deassert MIPI-sequence")
switched to a direct msleep() instead of intel_dsi_msleep()
when there is no MIPI_SEQ_DEASSERT_RESET sequence, to fix
the panel on an Acer Aspire Switch 10 E SW3-016 not turning on.

And now testing on a Nextbook Ares 8A shows that panel_on_delay
must always be honored otherwise the panel will not turn on.

Instead of only always using regular msleep() for panel_on_delay
do as Windows does and always use regular msleep() everywhere
were intel_dsi_msleep() is used and drop the intel_dsi_msleep()
helper.

Changes in v2:
- Replace all intel_dsi_msleep() calls instead of just
the intel_dsi_msleep(panel_on_delay) call

Cc: stable@vger.kernel.org
Fixes: 6fdb335f1c9c ("drm/i915/dsi: Use unconditional msleep for the panel_on_delay when there is no reset-deassert MIPI-sequence")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230425194441.68086-1-hdegoede@redhat.com
(cherry picked from commit fa83c12132f71302f7d4b02758dc0d46048d3f5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix workqueue leak on bind errors

commit a75b49db6529b2af049eafd938fae888451c3685 upstream.

Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).

Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.

Fixes: 060530f1ea67 ("drm/msm: use componentised device support")
Cc: stable@vger.kernel.org # 3.15
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525093/
Link: https://lore.kernel.org/r/20230306100722.28485-9-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix vram leak on bind errors

commit 60d476af96015891c7959f30838ae7a9749932bf upstream.

Make sure to release the VRAM buffer also in a case a subcomponent fails
to bind.

Fixes: d863f0c7b536 ("drm/msm: Call msm_init_vram before binding the gpu")
Cc: stable@vger.kernel.org # 5.11
Cc: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525094/
Link: https://lore.kernel.org/r/20230306100722.28485-7-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix drm device leak on bind errors

commit 214b09db61978497df24efcb3959616814bca46b upstream.

Make sure to free the DRM device also in case of early errors during
bind().

Fixes: 2027e5b3413d ("drm/msm: Initialize MDSS irq domain at probe time")
Cc: stable@vger.kernel.org # 5.17
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525097/
Link: https://lore.kernel.org/r/20230306100722.28485-6-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix NULL-deref on irq uninstall

commit cd459c005de3e2b855a8cc7768e633ce9d018e9f upstream.

In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.

Fixes: f026e431cf86 ("drm/msm: Convert to Linux IRQ interfaces")
Cc: stable@vger.kernel.org # 5.14
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525104/
Link: https://lore.kernel.org/r/20230306100722.28485-5-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix NULL-deref on snapshot tear down

commit a465353b9250802f87b97123e33a17f51277f0b1 upstream.

In case of early initialisation errors and on platforms that do not use
the DPU controller, the deinitilisation code can be called with the kms
pointer set to NULL.

Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot")
Cc: stable@vger.kernel.org # 5.14
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/525099/
Link: https://lore.kernel.org/r/20230306100722.28485-4-johan+linaro@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/color: Fix typo for Plane CSC indexes

commit 2efc8e1001acfdc143cf2d25a08a4974c322e2a8 upstream.

Replace _PLANE_INPUT_CSC_RY_GY_2_* with _PLANE_CSC_RY_GY_2_*
for Plane CSC

Fixes: 6eba56f64d5d ("drm/i915/pxp: black pixels on pxp disabled")

Cc: <stable@vger.kernel.org>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330150104.2923519-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit e39c76b2160bbd005587f978d29603ef790aefcd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: lt8912b: Fix DSI Video Mode

commit f435b7ef3b360d689df2ffa8326352cd07940d92 upstream.

LT8912 DSI port supports only Non-Burst mode video operation with Sync
Events and continuous clock on clock lane, correct dsi mode flags
according to that removing MIPI_DSI_MODE_VIDEO_BURST flag.

Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm/adreno: fix runtime PM imbalance at gpu load

commit 0d997f95b70f98987ae031a89677c13e0e223670 upstream.

A recent commit moved enabling of runtime PM to GPU load time (first
open()) but failed to update the error paths so that runtime PM is
disabled if initialisation of the GPU fails. This would trigger a
warning about the unbalanced disable count on the next open() attempt.

Note that pm_runtime_put_noidle() is sufficient to balance the usage
count when pm_runtime_put_sync() fails (and is chosen over
pm_runtime_resume_and_get() for consistency reasons).

Fixes: 4b18299b3365 ("drm/msm/adreno: Defer enabling runpm until hw_init()")
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/524971/
Link: https://lore.kernel.org/r/20230303164807.13124-3-johan+linaro@kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: aspeed: romed8hm3: Fix GPIO polarity of system-fault LED

commit a3fd10732d276d7cf372c6746a78a1c8b6aa7541 upstream.

Turns out it's in fact not the same as the heartbeat LED.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org # v5.18+
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-2-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: s5pv210: correct MIPI CSIS clock name

commit 665b9459bb53b8f19bd1541567e1fe9782c83c4b upstream.

The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first
clock name to be "csis". Otherwise the driver fails to probe.

Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: fix WM8960 clock name in Itop Elite

commit 6c950c20da38debf1ed531e0b972bd8b53d1c11f upstream.

The WM8960 Linux driver expects the clock to be named "mclk". Otherwise
the clock will be ignored and not prepared/enabled by the driver.

Cc: <stable@vger.kernel.org>
Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board")
Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: aspeed: asrock: Correct firmware flash SPI clocks

commit 9dedb724446913ea7b1591b4b3d2e3e909090980 upstream.

While I'm not aware of any problems that have occurred running these
at 100 MHz, the official word from ASRock is that 50 MHz is the
correct speed to use, so let's be safe and use that instead.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Cc: stable@vger.kernel.org
Fixes: 2b81613ce417 ("ARM: dts: aspeed: Add ASRock E3C246D4I BMC")
Fixes: a9a3d60b937a ("ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC")
Link: https://lore.kernel.org/r/20230224000400.12226-4-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sysctl: clarify register_sysctl_init() base directory order

commit 228b09de936395ddd740df3522ea35ae934830d8 upstream.

Relatively new docs which I added which hinted the base directories needed
to be created before is wrong, remove that incorrect comment. This has been
hinted before by Eric twice already [0] [1], I had just not verified that
until now. Now that I've verified that updates the docs to relax the context
described.

[0] https://lkml.kernel.org/r/875ys0azt8.fsf@email.froward.int.ebiederm.org
[1] https://lkml.kernel.org/r/87ftbiud6s.fsf@x220.int.ebiederm.org

Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: rcar_rproc: Call of_node_put() on iteration error

commit f8bae637d3d5e082b4ced71e28b16eb3ee0683c1 upstream.

Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.

Fixes: 285892a74f13 ("remoteproc: Add Renesas rcar driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20230320221826.2728078-4-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: imx_rproc: Call of_node_put() on iteration error

commit 5ef074e805ecfd9a16dbb7b6b88bbfa8abad7054 upstream.

Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.

Fixes: b29b4249f8f0 ("remoteproc: imx_rproc: add i.MX specific parse fw hook")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-5-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error

commit e0e01de8ee146986872e54e8365f4b4654819412 upstream.

Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.

Fixes: ec0e5549f358 ("remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-6-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: st: Call of_node_put() on iteration error

commit 8a74918948b40317a5b5bab9739d13dcb5de2784 upstream.

Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.

Fixes: 3df52ed7f269 ("remoteproc: st: add reserved memory support")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-3-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

remoteproc: stm32: Call of_node_put() on iteration error

commit ccadca5baf5124a880f2bb50ed1ec265415f025b upstream.

Function of_phandle_iterator_next() calls of_node_put() on the last
device_node it iterated over, but when the loop exits prematurely it has
to be called explicitly.

Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230320221826.2728078-2-mathieu.poirier@linaro.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc_sysctl: enhance documentation

commit 1dc8689e4cc651e21566e10206a84c4006e81fb1 upstream.

Expand documentation to clarify:

  o that paths don't need to exist for the new API callers
  o clarify that we *require* callers to keep the memory of
    the table around during the lifetime of the sysctls
  o annotate routines we are trying to deprecate and later remove

Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

proc_sysctl: update docs for __register_sysctl_table()

commit 67ff32289acad9ed338cd9f2351b44939e55163e upstream.

Update the docs for __register_sysctl_table() to make it clear no child
entries can be passed. When the child is true these are non-leaf entries
on the ctl table and sysctl treats these as directories. The point to
__register_sysctl_table() is to deal only with directories not part of
the ctl table where thay may riside, to be simple and avoid recursion.

While at it, hint towards using long on extra1 and extra2 later.

Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: nmi_debug: fix return value of __setup handler

commit d1155e4132de712a9d3066e2667ceaad39a539c5 upstream.

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from nmi_debug_setup().

Fixes: 1e1030dccb10 ("sh: nmi_debug support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <izh1979@gmail.com>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230306040037.20350-3-rdunlap@infradead.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: init: use OF_EARLY_FLATTREE for early init

commit 6cba655543c7959f8a6d2979b9d40a6a66b7ed4f upstream.

When CONFIG_OF_EARLY_FLATTREE and CONFIG_SH_DEVICE_TREE are not set,
SH3 build fails with a call to early_init_dt_scan(), so in
arch/sh/kernel/setup.c and arch/sh/kernel/head_32.S, use
CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF_FLATTREE.

Fixes this build error:
../arch/sh/kernel/setup.c: In function 'sh_fdt_init':
../arch/sh/kernel/setup.c:262:26: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration]
262 | if (!dt_virt || !early_init_dt_scan(dt_virt)) {

Fixes: 03767daa1387 ("sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE")
Fixes: eb6b6930a70f ("sh: fix memory corruption of unflattened device tree")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: linux-sh@vger.kernel.org
Cc: stable@vger.kernel.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230306040037.20350-4-rdunlap@infradead.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: mcount.S: fix build error when PRINTK is not enabled

commit c2bd1e18c6f85c0027da2e5e7753b9bfd9f8e6dc upstream.

Fix a build error in mcount.S when CONFIG_PRINTK is not enabled.
Fixes this build error:

sh2-linux-ld: arch/sh/lib/mcount.o: in function `stack_panic':
(.text+0xec): undefined reference to `dump_stack'

Fixes: e460ab27b6c3 ("sh: Fix up stack overflow check with ftrace disabled.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230306040037.20350-8-rdunlap@infradead.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: math-emu: fix macro redefined warning

commit 58a49ad90939386a8682e842c474a0d2c00ec39c upstream.

Fix a warning that was reported by the kernel test robot:

In file included from ../include/math-emu/soft-fp.h:27,
                 from ../arch/sh/math-emu/math.c:22:
../arch/sh/include/asm/sfp-machine.h:17: warning: "__BYTE_ORDER" redefined
   17 | #define __BYTE_ORDER __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:21:
../arch/sh/math-emu/sfp-util.h:71: note: this is the location of the previous definition
   71 | #define __BYTE_ORDER __LITTLE_ENDIAN

Fixes: b929926f01f2 ("sh: define __BIG_ENDIAN for math-emu")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202111121827.6v6SXtVv-lkp@intel.com
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230306040037.20350-5-rdunlap@infradead.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SMB3: force unmount was failing to close deferred close files

commit 2cb6f968775a9fd60c90a6042b9550bcec3ea087 upstream.

In investigating a failure with xfstest generic/392 it
was noticed that mounts were reusing a superblock that should
already have been freed. This turned out to be related to
deferred close files keeping a reference count until the
closetimeo expired.

Currently the only way an fs knows that mount is beginning is
when force unmount is called, but when this, ie umount_begin(),
is called all deferred close files on the share (tree
connection) should be closed immediately (unless shared by
another mount) to avoid using excess resources on the server
and to avoid reusing a superblock which should already be freed.

In umount_begin, close all deferred close handles for that
share if this is the last mount using that share on this
client (ie send the SMB3 close request over the wire for those
that have been already closed by the app but that we have
kept a handle lease open for and have not sent closes to the
server for yet).

Reported-by: David Howells <dhowells@redhat.com>
Acked-by: Bharath SM <bharathsm@microsoft.com>
Cc: <stable@vger.kernel.org>
Fixes: 78c09634f7dc ("Cifs: Fix kernel oops caused by deferred close for files.")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

smb3: fix problem remounting a share after shutdown

commit 716a3cf317456fa01d54398bb14ab354f50ed6a2 upstream.

xfstests generic/392 showed a problem where even after a
shutdown call was made on a mount, we would still attempt
to use the (now inaccessible) superblock if another mount
was attempted for the same share.

Reported-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 087f757b0129 ("cifs: add shutdown support")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

inotify: Avoid reporting event with invalid wd

commit c915d8f5918bea7c3962b09b8884ca128bfd9b0c upstream.

When inotify_freeing_mark() races with inotify_handle_inode_event() it
can happen that inotify_handle_inode_event() sees that i_mark->wd got
already reset to -1 and reports this value to userspace which can
confuse the inotify listener. Avoid the problem by validating that wd is
sensible (and pretend the mark got removed before the event got
generated otherwise).

CC: stable@vger.kernel.org
Fixes: 7e790dd5fc93 ("inotify: fix error paths in inotify_update_watch")
Message-Id: <20230424163219.9250-1-jack@suse.cz>
Reported-by: syzbot+4a06d4373fd52f0b2f9c@syzkaller.appspotmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: thinkpad_acpi: Add profile force ability

commit 1684878952929e20a864af5df7b498941c750f45 upstream.

There has been a lot of confusion around which platform profiles are
supported on various platforms and it would be useful to have a debug
method to be able to override the profile mode that is selected.

I don't expect this to be used in anything other than debugging in
conjunction with Lenovo engineers - but it does give a way to get a
system working whilst we wait for either FW fixes, or a driver fix
to land upstream, if something is wonky in the mode detection logic

Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230505132523.214338-2-mpearson-lenovo@squebb.ca
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: touchscreen_dmi: Add info for the Dexp Ursus KX210i

commit 4b65f95c87c35699bc6ad540d6b9dd7f950d0924 upstream.

Add touchscreen info for the Dexp Ursus KX210i

Signed-off-by: Andrey Avdeev <jamesstoun@gmail.com>
Link: https://lore.kernel.org/r/ZE4gRgzRQCjXFYD0@avdeevavpc
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: thinkpad_acpi: Fix platform profiles on T490

commit 0c0cd3e25a5b64b541dd83ba6e032475a9d77432 upstream.

I had incorrectly thought that PSC profiles were not usable on Intel
platforms so had blocked them in the driver initialistion. This broke
platform profiles on the T490.

After discussion with the FW team PSC does work on Intel platforms and
should be allowed.

Note - it's possible this may impact other platforms where it is advertised
but special driver support that only Windows has is needed. But if it does
then they will need fixing via quirks. Please report any issues to me so I
can get them addressed - but I haven't found any problems in testing...yet

Fixes: bce6243f767f ("platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2177962
Cc: stable@vger.kernel.org
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230505132523.214338-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: touchscreen_dmi: Add upside-down quirk for GDIX1002 ts on the Juno Tablet

commit 6abfa99ce52f61a31bcfc2aaaae09006f5665495 upstream.

The Juno Computers Juno Tablet has an upside-down mounted Goodix
touchscreen. Add a quirk to invert both axis to correct for this.

Link: https://junocomputers.com/us/product/juno-tablet/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230505210323.43177-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86/intel-uncore-freq: Return error on write frequency

commit 75e406b540c3eca67625d97bbefd4e3787eafbfe upstream.

Currently when the uncore_write() returns error, it is silently
ignored. Return error to user space when uncore_write() fails.

Fixes: 49a474c7ba51 ("platform/x86: Add support for Uncore frequency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wendy Wang <wendy.wang@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230418153230.679094-1-srinivas.pandruvada@linux.intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: release leases for deferred close handles when freezing

commit d39fc592ef8ae9a89c5e85c8d9f760937a57d5ba upstream.

We should not be caching closed files when freeze is invoked on an fs
(so we can release resources more gracefully).

Fixes xfstests generic/068 generic/390 generic/491

Reviewed-by: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix pcchunk length type in smb2_copychunk_range

commit d66cde50c3c868af7abddafce701bb86e4a93039 upstream.

Change type of pcchunk->Length from u32 to u64 to match
smb2_copychunk_range arguments type. Fixes the problem where performing
server-side copy with CIFS_IOC_COPYCHUNK_FILE ioctl resulted in incomplete
copy of large files while returning -EINVAL.

Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files")
Cc: <stable@vger.kernel.org>
Signed-off-by: Pawel Witek <pawel.ireneusz.witek@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: fix full zone super block reading on ZNS

commit 02ca9e6fb5f66a031df4fac508b8e477ca69e918 upstream.

When both of the superblock zones are full, we need to check which
superblock is newer. The calculation of last superblock position is wrong
as it does not consider zone_capacity and uses the length.

Fixes: 9658b72ef300 ("btrfs: zoned: locate superblock position using zone capacity")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: zoned: zone finish data relocation BG with last IO

commit f84353c7c20536ea7e01eca79430eccdf3cc7348 upstream.

For data block groups, we zone finish a zone (or, just deactivate it) when
seeing the last IO in btrfs_finish_ordered_io(). That is only called for
IOs using ZONE_APPEND, but we use a regular WRITE command for data
relocation IOs. Detect it and call btrfs_zone_finish_endio() properly.

Fixes: be1a1d7a5d24 ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix space cache inconsistency after error loading it from disk

commit 0004ff15ea26015a0a3a6182dca3b9d1df32e2b7 upstream.

When loading a free space cache from disk, at __load_free_space_cache(),
if we fail to insert a bitmap entry, we still increment the number of
total bitmaps in the btrfs_free_space_ctl structure, which is incorrect
since we failed to add the bitmap entry. On error we then empty the
cache by calling __btrfs_remove_free_space_cache(), which will result
in getting the total bitmaps counter set to 1.

A failure to load a free space cache is not critical, so if a failure
happens we just rebuild the cache by scanning the extent tree, which
happens at block-group.c:caching_thread(). Yet the failure will result
in having the total bitmaps of the btrfs_free_space_ctl always bigger
by 1 then the number of bitmap entries we have. So fix this by having
the total bitmaps counter be incremented only if we successfully added
the bitmap entry.

Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>