drm/amd/display: Fix naming of DSC Debugfs entry

[why]
Fix naming and return bits rather than bytes per pixel for
naming consistency. Because registers return Bytes per pixel,
but DSC Config structure is expecting bits per pixel as input.
So when returning the value convert from bytes into bits.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename bytes_pp to the correct bits_pp

[Why]
Struct dcn_dsc_state is used for reading current state
and parameters of DSC on a pipe, the target rate parameter
uses bytes per pixel even though its reading BITS_PER_PIXEL
register.

[How]
Changing it to Bits Per Pixel for consistency.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Clean up global sync param retrieval

[Why]
This change replaces older looping code in favor of these functions.

[How]
There are built in functions for extracting global sync params
during mode validation now.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/swsmu: allow asic to handle sensor type by itself

1. allow asic to handle sensor type by itself.
2. if not, use smu common sensor to handle it.

Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add support for umc 8.7 ras functions

added support for umc 8.7 error reporting and query

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update driver if file for sienna_cichlid

Update sienna_cichlid driver if header and related files.
Support new smu metrics for pre & postDS frequency.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add umc v8_7_0 IP headers

the change introduces IP headers for unified memory controller (umc)

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: revise the outputs layout of amdgpu_pm_info debugfs

The current outputs of amdgpu_pm_info debugfs come with clock gating
status and followed by current clock/power information. However the
clock gating status retrieving may pull GFX out of CG status. That
will make the succeeding clock/power information retrieving inaccurate.

To overcome this and be with minimum impact, the outputs are updated
to show current clock/power information first.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/vcn3.0: remove extra asic type check"

This reverts commit 058c07201ec7d373fc6a0a570b38a8a9d62c29fb.
Chip NAVY_FLOUNDER uses vcn3.0, but it has only one VCN instance.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix spurious debug exception on gfx10

s_barrier triggers a debug exception when issued with PRIV=1,
DEBUG_EN=1. This causes spurious notifications to rocm-gdb.

Clear MODE before issuing s_barrier and restore MODE afterwards
in the context restore handler.

Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Tested-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: drop unnecessary message support check(v2)

Take back patch:drop unnecessary message support check
Because the gpu reset fail problem on renoir can be fixed by:
drm/amd/powerplay: skip invalid msg when smu set mp1 state
It needs to remove SWSMU_CODE_LAYER_L1 in smu_cmn.h to guard a clear
code layer.

Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add thermal throttling SMI event

Add support for reporting thermal throttling events through SMI.
Also, add a counter to count the number of throttling interrupts
observed and report the count in the SMI event message.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix system hang issue during GPU reset

when GPU hang, driver has multi-paths to enter amdgpu_device_gpu_recover,
the atomic adev->in_gpu_reset and hive->in_reset are used to avoid
re-entering GPU recovery.

During GPU reset and resume, it is unsafe that other threads access GPU,
which maybe cause GPU reset failed. Therefore the new rw_semaphore
adev->reset_sem is introduced, which protect GPU from being accessed by
external threads during recovery.

v2:
1. add rwlock for some ioctls, debugfs and file-close function.
2. change to use dqm->is_resetting and dqm_lock for protection in kfd
driver.
3. remove try_lock and change adev->in_gpu_reset as atomic, to avoid
re-enter GPU recovery for the same GPU hang.

v3:
1. change back to use adev->reset_sem to protect kfd callback
functions, because dqm_lock couldn't protect all codes, for example:
free_mqd must be called outside of dqm_lock;

[ 1230.176199] Hardware name: Supermicro SYS-7049GP-TRT/X11DPG-QT, BIOS 3.1 05/23/2019
[ 1230.177221] Call Trace:
[ 1230.178249]  dump_stack+0x98/0xd5
[ 1230.179443]  amdgpu_virt_kiq_reg_write_reg_wait+0x181/0x190 [amdgpu]
[ 1230.180673]  gmc_v9_0_flush_gpu_tlb+0xcc/0x310 [amdgpu]
[ 1230.181882]  amdgpu_gart_unbind+0xa9/0xe0 [amdgpu]
[ 1230.183098]  amdgpu_ttm_backend_unbind+0x46/0x180 [amdgpu]
[ 1230.184239]  ? ttm_bo_put+0x171/0x5f0 [ttm]
[ 1230.185394]  ttm_tt_unbind+0x21/0x40 [ttm]
[ 1230.186558]  ttm_tt_destroy.part.12+0x12/0x60 [ttm]
[ 1230.187707]  ttm_tt_destroy+0x13/0x20 [ttm]
[ 1230.188832]  ttm_bo_cleanup_memtype_use+0x36/0x80 [ttm]
[ 1230.189979]  ttm_bo_put+0x1be/0x5f0 [ttm]
[ 1230.191230]  amdgpu_bo_unref+0x1e/0x30 [amdgpu]
[ 1230.192522]  amdgpu_amdkfd_free_gtt_mem+0xaf/0x140 [amdgpu]
[ 1230.193833]  free_mqd+0x25/0x40 [amdgpu]
[ 1230.195143]  destroy_queue_cpsch+0x1a7/0x270 [amdgpu]
[ 1230.196475]  pqm_destroy_queue+0x105/0x260 [amdgpu]
[ 1230.197819]  kfd_ioctl_destroy_queue+0x37/0x70 [amdgpu]
[ 1230.199154]  kfd_ioctl+0x277/0x500 [amdgpu]
[ 1230.200458]  ? kfd_ioctl_get_clock_counters+0x60/0x60 [amdgpu]
[ 1230.201656]  ? tomoyo_file_ioctl+0x19/0x20
[ 1230.202831]  ksys_ioctl+0x98/0xb0
[ 1230.204004]  __x64_sys_ioctl+0x1a/0x20
[ 1230.205174]  do_syscall_64+0x5f/0x250
[ 1230.206339]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

2. remove try_lock and introduce atomic hive->in_reset, to avoid
re-enter GPU recovery.

v4:
1. remove an unnecessary whitespace change in kfd_chardev.c
2. remove comment codes in amdgpu_device.c
3. add more detailed comment in commit message
4. define a wrap function amdgpu_in_reset

v5:
1. Fix some style issues.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com>
Suggested-by: Luben Tukov <luben.tuikov@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update dec ring test for VCN 3.0

Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove redundant initialization of variable result

The variable result is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn3.0: remove extra asic type check

vcn ip block is already selected based on ASIC type during set_ip_blocks.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg3.0: remove extra asic type check

jpeg ip block is already selected based on ASIC type during set_ip_blocks.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Unify gfx9/gfx10 context save area layouts

Add some padding before the MODE register in the HWREGs block to
preserve the same layout as gfx9. This simplifies implementation of a
user-mode debugger.

Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Add RLC_CGTT_MGCG_OVERRIDE to gfx 10.3 headers

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove extra asic type check

vcn ip block is already selected based on ASIC type during set_ip_blocks

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg: Remove extra asic type check

jpeg ip block is already selected based on ASIC type during set_ip_blocks.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/powerplay: add some documentation about memory clock

We expose the actual memory controller clock rate in Linux,
not the effective memory clock of the DRAMs.  To translate
it, it follows the following formula:

Clock conversion (Mhz):
HBM: effective_memory_clock = memory_controller_clock * 1
G5:  effective_memory_clock = memory_controller_clock * 1
G6:  effective_memory_clock = memory_controller_clock * 2

DRAM data rate (MT/s):
HBM: effective_memory_clock * 2 = data_rate
G5:  effective_memory_clock * 4 = data_rate
G6:  effective_memory_clock * 8 = data_rate

Bandwidth (MB/s):
data_rate * vram_bit_width / 8 = memory_bandwidth

Some examples:
G5 on RX460:
memory_controller_clock = 1750 Mhz
effective_memory_clock = 1750 Mhz * 1 = 1750 Mhz
data rate = 1750 * 4 = 7000 MT/s
memory_bandwidth = 7000 * 128 bits / 8 = 112000 MB/s

G6 on RX5600:
memory_controller_clock = 900 Mhz
effective_memory_clock = 900 Mhz * 2 = 1800 Mhz
data rate = 1800 * 8 = 14400 MT/s
memory_bandwidth = 14400 * 192 bits / 8 = 345600 MB/s

Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant NULL check

Fix below warnings reported by coccicheck:
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn30/dcn30_clk_mgr.c:557:2-7: WARNING: NULL check before some freeing functions is not needed.

Fixes: 4d55b0dd1cdd ("drm/amd/display: Add DCN3 CLK_MGR")
Signed-off-by: Li Heng <liheng40@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move umc specific macros to header

certain umc macros are common across umc versions

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update golden setting for sienna_cichlid

Update golden setting for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: correct smu message for vf mode

Set valid_in_vf to false for the message not support in vf mode on
sienna cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add msg map for mode1 reset

Mapping Mode1Reset message for sienna_cichlid.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: skip invalid msg when smu set mp1 state

Some asic may not support for some message of set mp1 state.
If the return value of smu_send_smc_msg is -EINVAL, that means it failed
to send msg to smc as it can not map an valid message for the ASIC. And
with that case, smu_set_mp1_state should be skipped as those ASIC was in
fact do not support for that.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: Simplify drm_crtc_state::active checks

drm_atomic_crtc_check enforces that ::active can only be true if
::enable is as well.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: remove the dpm checking in the boot sequence

It's not necessary to retrieve the power features status when the
asic is booted up the first time. This patch can have the features
enablement status still checked in suspend/resume case and removed
from the first boot up sequence.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: Fix compiler warning in df driver

Fix this warning:

  CC [M]  drivers/gpu/drm/amd/amdgpu/gfxhub_v1_1.o
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
                 from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
drivers/gpu/drm/amd/amdgpu/df_v3_6.c: In function ‘df_v3_6_pmc_get_count’:
./include/drm/drm_print.h:487:2: warning: ‘hi_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  487 |  __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:25: note: ‘hi_base_addr’ was declared here
  649 |  uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;
      |                         ^~~~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h:29,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.h:26,
                 from drivers/gpu/drm/amd/amdgpu/amdgpu.h:43,
                 from drivers/gpu/drm/amd/amdgpu/df_v3_6.c:23:
./include/drm/drm_print.h:487:2: warning: ‘lo_base_addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  487 |  __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
      |  ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/df_v3_6.c:649:11: note: ‘lo_base_addr’ was declared here
  649 |  uint32_t lo_base_addr, hi_base_addr, lo_val = 0, hi_val = 0;

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: won't include gc and mmhub register headers in GMC block

All gc/mmhub register access and operation should be in gfxhub/mmhub level.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move get_invalidate_req function into gfxhub/mmhub level

This patch is to move get_invalidate_req into gfxhub/mmhub level. It will avoid
mismatch of the different gfxhub/mmhub register offsets and fields in the same
gmc block.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add vmhub funcs helper (v2)

This patch is to introduce vmhub funcs helper to add following callback
(print_l2_protection_fault_status). Each GC/MMHUB register specific programming
should be in gfxhub/mmhub level.

v2: remove the condition of funcs assignment.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: abstract set_vm_fault_masks function to refine the programming

This patch is to add set_vm_fault_masks helper to amdgpu_gmc to refine the
original programming.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add member to store vm fault interrupt masks

This patch adds a member in vmhub structure to store the vm fault interrupt
masks for different version gfxhubs/mmhubs.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/powerplay: drop unnecessary message support check"

The below 3 messages are not supported on Renoir
SMU_MSG_PrepareMp1ForShutdown
SMU_MSG_PrepareMp1ForUnload
SMU_MSG_PrepareMp1ForReset

It needs to revert patch:
drm/amd/powerplay: drop unnecessary message support check
to avoid set mp1 state fail during gpu reset on renoir.

Signed-off-by: changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add printing after executing page reservation to eeprom

This will tell users if the faulty page has been written to
external eeprom device in dmesg log.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: expand sienna chichlid reg access  support

Added dedicated 64bit reg read/write support

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Expose connector VRR range via debugfs"

v3:
* Rebase (Manasi)
v2:
* Rebase (Manasi)

As both VRR min and max are already part of drm_display_info,
drm can expose this VRR range for each connector.

Hence this logic should move to core DRM.

This reverts commit 727962f030c23422a01e8b22d0f463815fb15ec4.

Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: AMD gfx <amd-gfx@lists.freedesktop.org>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sienna_cichlid: add SMU i2c support (v2)

Enable SMU i2c bus access for sienna_cichlid asics.

v2: change callback name

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/navi1x: add SMU i2c support (v2)

Enable SMU i2c bus access for navi1x asics.

v2: add missing implementation

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/swSMU: remove eeprom from the smu i2c handlers (v2)

The driver uses it for EEPROM access, but it's just an i2c bus.

v2: change the callback name as well.

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vega20: enable the smu i2c bus for all boards

There is no longer a ras dependency so it's safe to expose
on all boards.

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove eeprom from the smu i2c handlers

The driver uses it for EEPROM access, but it's just an i2c bus.

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move i2c bus lock out of ras structure

It's not really ras related.  It's just a lock for the
bus in general.  This removes the ras dependency from
the smu i2c bus.

Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix NULL dereference in dpm sysfs handlers

NULL dereference occurs when string that is not ended with space or
newline is written to some dpm sysfs interface (for example pp_dpm_sclk).
This happens because strsep replaces the tmp with NULL if the delimiter
is not present in string, which is then dereferenced by tmp[0].

Reproduction example:
sudo sh -c 'echo -n 1 > /sys/class/drm/card0/device/pp_dpm_sclk'

Signed-off-by: Paweł Gronowski <me@woland.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix a crash when overclocking Vega M

Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and
vddci_voltage_table is empty. It has been tested on Intel Hades Canyon
(i7-8809G).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489
Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: retrieve VCN dpm table per instances

To accommodate VCN instances variance, otherwise it may trigger
smu response error for configuration with less instances.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update driver if version for navy_flounder

It's in accordance with pmfw 65.3.0 for navy_flounder.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: fix typos for clk map

It should be DCLK1->PPCLK_DCLK_1 and VCLK->PPCLK_VCLK_0.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: merge shared memory into vcpu

Merge vcn firmware shared memory bo into vcn vcpu bo.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/vcn: add shared memory restore after wake up from sleep."

This reverts commit 21b704d78352c289d31697824ceea7ad0ff4ce59.
To merge vcn firmware shared memory bo into vcn vcpu bo.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.95

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: interface to obtain minimum plane size caps

[Why]
Implement an interface to obtain plane size caps

[How]
Add min_width, min_height fields to dc_plane_cap structure.
Set values to 16x16 for discrete ASICs, and 64x64 for others.

Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add additional config guards for DCN

[Why&How]

Fix build error by protecting code with config guard
to enable building amdgpu without CONFIG_DRM_AMD_DC_DCN
enabled. This option is disabled by default for allmodconfig.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Call dsc related functions indirectly via dc interface

[Why&How]
Accessing dcn20_add_dsc_to_stream_resource directly
causes build failure for configuration which has
CONFIG_DRM_AMD_DC_DCN disabled. Fix this by
calling the corresponding function exposed via dc
resource functions.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Improve compatibility by re-ordering info-packets

[why]
On DCN20, Some features would not be activated when ALLM was turned on.
TV seemed to activate only the latest info packet sent, and the ALLM
info packet was sent after the VSIF info packet.

The packet indices was also inconsistent between DCN10 and DCN20.

[how]
Change the packet indices of DCN20 to match those of DCN10.
This makes them consistent and also makes the vendor info packet
be sent after the hfvsif info packet.

Signed-off-by: Naveed Ashfaq <Naveed.Ashfaq@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.25

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Make new dc interface for adding dsc resource

[Why]
dcn20_add_dsc_to_stream_resource is accessed in amdgpu_dm directly.
This creates build error for configuration with DCN disabled.

[How]
Make the function available through a resource pool function so
that dcn20 function need not be called directly.

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename dsc extended caps as dsc branch decoder caps

[why]
The capability fields are reserved for DSC branch
only to report the capability related to the
branch's DSC decoder.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Decouple ABM init from dmcu

[Why]
With ABM implemented on DMUB the ABM enablement
shoudn't be solely rely on dmcu. Otherwise it won't work
if dmcu is disabled.

[How]
1. Decouple dmcub config copy from dmcu iram copy.
2. Set abm connector property if either dmcu or dmub enabled.

Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement AMD VSIF V3

[Why]
To support V3

[How]
Generate new VSIF for V3

Signed-off-by: Reza Amini <Reza.Amini@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DSC parameters logging to debugfs

[why]
Need to add new parameters to debugfs logging so
we will know what parameters DSC is using for
debug purposes. So we are adding a read function
in debugfs to read DSC status registers

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove unhelpful 5ms delay

[Why]
Scaler vendor confirmed the 5ms was not helpful so no point in keeping
it.

[How]
Revert 5ms delay after setting training pattern.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: do not disable SMU on vm reboot

For passthrough device,  we do baco reset after 1st vm boot so
if we disable SMU on 1st VM shutdown baco reset will fail for
2nd vm boot.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add timeout flush mechanism to update wptr for self interrupt (v2)

outstanding log reaches threshold will trigger IH ring1/2's wptr
reported, that will avoid generating interrupts to ring0 too frequent.
But if ring1/2's wptr hasn't been increased for a long time, the outstanding log
can't reach threshold so that driver can't get latest wptr info and
miss some interrupts.

v2: squash in warning fix

Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable xgmi support for sienna cichlid

set xgmi support flag suring nv ip init sequence

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: load asd for sienna cichlid

do not abort psp asd load sequence for sienna cichlid

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: tag swSMU code layers

Per designs, the swSMU code is separated into four layers. And the typical
calling flow should be like: amdgpu_smu.c -> ${asic}_ppt.c -> smu_v11/12_0.c
-> smu_cmn.c. Compile errors will come out for any violations. This can
help to prevent cross callings(e.g. amdgpu_smu.c -> ${asic}_ppt.c ->
amdgpu_smu.c -> ${asic}_ppt.c) which were common in our code.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: revise the calling flow on OD table update

This can eliminate the cross callings and maintain clear
code layer.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: drop unnecessary message support check

These messages are known to be supported by all ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move SMC message issuing APIs to smu_cmn.c

Considering they can be shared by all ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: update the tables init related

To avoid cross calling and maintain clear code layer.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move table setting common code to smu_cmn.c

As they are shared by all ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: maximum code sharing around watermarks setting

Maximum code sharing.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move more APIs to smu_cmn.c

Considering they are shared by all ASICs.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: common API for disabling all features with exception

We are moving to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move ppfeature mask setting to smu_cmn.c

Considering they are shared by all ASICs. And we are moving
to centralize all feature enablement/support checking and
setting APIs in smu_cmn.c.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement smu_cmn_get_enabled_mask() for all ASICs

Instead of having each for smu v11 and v12.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move dpm feature enablement checking to smu_cmn.c

Considering it is shared by all ASICs and smu_cmn.c should be
the right place.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move dpm feature support checking to smu_cmn.c

Considering it is shared by all ASICs and smu_cmn.c should be
the right place.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move clock dpm enablement check to smu_v11/v12

As those APIs of smu_v11/v12 are more widely called. And they
need this check also.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: drop unused code

Those code were obsoleted by new common API
smu_cmn_to_asic_specific_index().

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: unify swSMU index to asic specific index mapping

By this we can drop redundant code.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: widely share the API for data table retrieving

Considering the data table retrieving can be more widely shared,
amdgpu_atombios.c is the right place.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add read amdgpu_gfxoff status in debugfs

 Add interface for SMU12 device, used by UMR.

v2: fix code style

Signed-off-by: Jinzhou.Su <Jinzhou.Su@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: load ta firmware for sienna cichlid

call psp_int_ta_microcode() to parse the ta firmware.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: John Clements <John.Clements@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: suppress compile error around BUG_ON

To suppress the compile error below for "ARCH=arc".
   drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c: In function 'arcturus_fill_eeprom_i2c_req':
>> arch/arc/include/asm/bug.h:22:2: error: implicit declaration of function 'pr_warn'; did you mean 'pci_warn'? [-Werror=implicit-function-declaration]
      22 |  pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
         |  ^~~~~~~
   include/asm-generic/bug.h:62:57: note: in expansion of macro 'BUG'
      62 | #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
         |                                                         ^~~
   drivers/gpu/drm/amd/amdgpu/../powerplay/arcturus_ppt.c:2157:2: note: in expansion of macro 'BUG_ON'
    2157 |  BUG_ON(numbytes > MAX_SW_I2C_COMMANDS);

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/smu11: drop code chuck that got accidently re-added

Seems to be due to a bad merge.  Code was originally added in
commit 5aaa8fff3aa950 ("drm/amd/powerplay: unload mp1 for Arcturus RAS baco reset")
but later removed in commit 7f70443fd83407 ("drm/amdgpu: set mp1 state before reload").
but is back again.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdkfd: Fix large framesize for kfd_smi_ev_read()

The buffer allocated is of 1024 bytes. Allocate this from
heap instead of stack.

Also remove check for stack size since we're allocating from heap

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

include/uapi/linux: Update KFD ioctl version

Bump KFD ioctl after adding SMI events support

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Provide SMI events watch

When the compute is malfunctioning or performance drops, the system admin
will use SMI (System Management Interface) tool to monitor/diagnostic what
went wrong. This patch provides an event watch interface for the user
space to register devices and subscribe events they are interested. After
registered, the user can use annoymous file descriptor's poll function
with wait-time specified and wait for events to happen. Once an event
happens, the user can use read() to retrieve information related to the
event.

VM fault event is done in this patch.

v2: - remove UNREGISTER and add event ENABLE/DISABLE
    - correct kfifo usage
    - move event message API to kfd_ioctl.h
v3: send the event msg in text than in binary
v4: support multiple clients
v5: move events enablement from ioctl to fd write
v6: sparse fix

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ih CG for navy_flounder

Enable ih CG by setting the corresponding flag.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable hdp CG and LS for navy_flounder

Enable hdp CG and LS by setting the corresponding flags.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable mc CG and LS for navy_flounder

Enable mc CG and LS by setting the corresponding flags.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable athub/mmhub PG for navy_flounder

Enable athub/mmhub PG by setting the corresponding flags.
Actually the enablement is exercised by PMFW.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: set VCN1 pg only for sienna_cichlid

navy_flounder has one VCN instance, and the work around
is to avoid smu reponse error when setting VCN1 pg for
the chip. It is preferred VCN0 and VCN1 are separated
for the pg setting so better power efficiency can be
achieved.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add DC support for navy flounder

Plumb DC support for navy flounder through.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: support athub cg setting for navy_flounder

navy_flounder has athub ip v2.1.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>