Shannon Nelson [Thu, 1 Apr 2021 17:56:08 +0000 (10:56 -0700)]
ionic: add ethtool support for PTP
Add the get_ts_info() callback for ethtool support of
timestamping information.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:07 +0000 (10:56 -0700)]
ionic: add and enable tx and rx timestamp handling
The Tx and Rx timestamped packets are handled through separate
queues. Here we set them up, service them, and tear them down
along with the normal Tx and Rx queues.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:06 +0000 (10:56 -0700)]
ionic: set up hw timestamp queues
We do hardware timestamping through a separate Tx queue,
and optionally through a separate Rx queue. These queues
are allocated, freed, and tracked separately from the basic
queue arrays.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:05 +0000 (10:56 -0700)]
ionic: add rx filtering for hw timestamp steering
Add handling of the new Rx packet classification filter type.
This simple bit of classification allows for steering packets
to a separate Rx queue for processing.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:04 +0000 (10:56 -0700)]
ionic: link in the new hw timestamp code
These are changes to compile and link the new code, but no
new feature support is available or advertised yet.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:03 +0000 (10:56 -0700)]
ionic: add hw timestamp support files
This adds the file of code for supporting Tx and Rx hardware
timestamps and the raw clock interface, but does not yet link
it in for compiling or use.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:02 +0000 (10:56 -0700)]
ionic: split adminq post and wait calls
Split the wait part out of adminq_post_wait() into a separate
function so that a caller can have finer grain control over
the sequencing of operations and locking.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:01 +0000 (10:56 -0700)]
ionic: add hw timestamp structs to interface
The interface for hardware timestamping includes a new FW
request, device identity fields, Tx and Rx queue feature bits, a
new Rx filter type, the beginnings of Rx packet classifications,
and hardware timestamp registers.
If the IONIC_ETH_HW_TIMESTAMP bit is shown in the
ionic_lif_config features bit string, then we have support
for the hw clock registers. If the IONIC_RXQ_F_HWSTAMP and
IONIC_TXQ_F_HWSTAMP features are shown in the ionic_q_identity
features, then the queues can support HW timestamps on packets.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:56:00 +0000 (10:56 -0700)]
ionic: add handling of larger descriptors
In preparating for hardware timestamping, we need to support
large Tx and Rx completion descriptors. Here we add the new
queue feature ids and handling for the completion descriptor
sizes.
We only are adding support for the Rx 2x sized completion
descriptors in the general Rx queues for now as we will be
using it for PTP Rx support, and we don't have an immediate
use for the large descriptors in the general Tx queues yet;
it will be used in a special Tx queues added in one of the
next few patches.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson [Thu, 1 Apr 2021 17:55:59 +0000 (10:55 -0700)]
ionic: add new queue features to interface
Add queue feature extensions to prepare for features that
can be queue specific, in addition to the general queue
features already defined. While we're here, change the
existing feature ids from #defines to enum.
Signed-off-by: Allen Hubbe <allenbh@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 2 Apr 2021 18:03:07 +0000 (11:03 -0700)]
Merge git://git./linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Phillip Potter [Thu, 1 Apr 2021 22:36:07 +0000 (23:36 +0100)]
net: usb: ax88179_178a: initialize local variables before use
Use memset to initialize local array in drivers/net/usb/ax88179_178a.c, and
also set a local u16 and u32 variable to 0. Fixes a KMSAN found uninit-value bug
reported by syzbot at:
https://syzkaller.appspot.com/bug?id=
00371c73c72f72487c1d0bfe0cc9d00de339d5aa
Reported-by: syzbot+4993e4a0e237f1b53747@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Thu, 1 Apr 2021 16:42:33 +0000 (09:42 -0700)]
net: phy: broadcom: Add statistics for all Gigabit PHYs
All Gigabit PHYs use the same register layout as far as fetching
statistics goes. Fast Ethernet PHYs do not all support statistics, and
the BCM54616S would require some switching between the coper and fiber
modes to fetch the appropriate statistics which is not supported yet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otto Hollmann [Thu, 1 Apr 2021 15:57:05 +0000 (17:57 +0200)]
net: document a side effect of ip_local_reserved_ports
If there is overlapp between ip_local_port_range and ip_local_reserved_ports with a huge reserved block, it will affect probability of selecting ephemeral ports, see file net/ipv4/inet_hashtables.c:723
int __inet_hash_connect(
...
for (i = 0; i < remaining; i += 2, port += 2) {
if (unlikely(port >= high))
port -= remaining;
if (inet_is_local_reserved_port(net, port))
continue;
E.g. if there is reserved block of 10000 ports, two ports right after this block will be 5000 more likely selected than others.
If this was intended, we can/should add note into documentation as proposed in this commit, otherwise we should think about different solution. One option could be mapping table of continuous port ranges. Second option could be letting user to modify step (port+=2) in above loop, e.g. using new sysctl parameter.
Signed-off-by: Otto Hollmann <otto.hollmann@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Thu, 1 Apr 2021 14:20:15 +0000 (22:20 +0800)]
lan743x: remove redundant semi-colon
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lu Wei [Thu, 1 Apr 2021 09:27:01 +0000 (17:27 +0800)]
net: hns: Fix some typos
Fix some typos.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wan Jiabing [Thu, 1 Apr 2021 08:40:29 +0000 (16:40 +0800)]
net: smc: Remove repeated struct declaration
struct smc_clc_msg_local is declared twice. One is declared at
301st line. The blew one is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wan Jiabing [Thu, 1 Apr 2021 07:08:22 +0000 (15:08 +0800)]
include: net: Remove repeated struct declaration
struct ctl_table_header is declared twice. One is declared
at 46th line. The blew one is not needed. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wong Vee Khee [Thu, 1 Apr 2021 06:06:28 +0000 (14:06 +0800)]
net: stmmac: remove unnecessary pci_enable_msi() call
The commit
d2a029bde37b ("stmmac: pci: add MSI support for Intel Quark
X1000") introduced a pci_enable_msi() call in stmmac_pci.c.
With the commit
58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to
contain all Intel platform"), Intel Quark platform related codes
have been moved to the newly created driver.
Removing this unnecessary pci_enable_msi() call as there are no other
devices that uses stmmac-pci and need MSI to be enabled.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wong Vee Khee [Thu, 1 Apr 2021 06:02:50 +0000 (14:02 +0800)]
stmmac: intel: use managed PCI function on probe and resume
Update dwmac-intel to use managed function, i.e. pcim_enable_device().
This will allow devres framework to call resource free function for us.
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xu Jia [Thu, 1 Apr 2021 03:22:23 +0000 (11:22 +0800)]
net: ipv6: Refactor in rt6_age_examine_exception
The logic in rt6_age_examine_exception is confusing. The commit is
to refactor the code.
Signed-off-by: Xu Jia <xujia39@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hoang Le [Thu, 1 Apr 2021 02:30:48 +0000 (09:30 +0700)]
tipc: fix unique bearer names sanity check
When enabling a bearer by name, we don't sanity check its name with
higher slot in bearer list. This may have the effect that the name
of an already enabled bearer bypasses the check.
To fix the above issue, we just perform an extra checking with all
existing bearers.
Fixes:
cb30a63384bc9 ("tipc: refactor function tipc_enable_bearer()")
Cc: stable@vger.kernel.org
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 1 Apr 2021 22:41:08 +0000 (15:41 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-03-31
This series contains updates to ice driver only.
Benita adds support for XPS.
Ani moves netdev registration to the end of probe to prevent use before
the interface is ready and moves up an error check to possibly avoid
an unneeded call. He also consolidates the VSI state and flag fields to
a single field.
Dan changes the segment where package information is pulled.
Paul S ensures correct ITR values are set when increasing ring size.
Paul G rewords a link misconfiguration message as this could be
expected.
Bruce removes setting an unnecessary AQ flag and corrects a memory
allocation call. Also fixes checkpatch issues for 'COMPLEX_MACRO'.
Qi aligns PTYPE bitmap naming by adding 'ptype' prefix to the bitmaps
missing it.
Brett removes limiting Rx queue mapping to RSS size as there is not a
dependency on this. He also refactors RSS configuration by introducing
individual functions for LUT and key configuration and by passing a
structure containing pertinent information instead of individual
arguments.
Tony corrects a comment block to follow netdev style.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov [Thu, 1 Apr 2021 17:56:15 +0000 (10:56 -0700)]
Merge branch 'sockmap: introduce BPF_SK_SKB_VERDICT and support UDP'
Cong Wang says:
====================
From: Cong Wang <cong.wang@bytedance.com>
We have thousands of services connected to a daemon on every host
via AF_UNIX dgram sockets, after they are moved into VM, we have to
add a proxy to forward these communications from VM to host, because
rewriting thousands of them is not practical. This proxy uses an
AF_UNIX socket connected to services and a UDP socket to connect to
the host. It is inefficient because data is copied between kernel
space and user space twice, and we can not use splice() which only
supports TCP. Therefore, we want to use sockmap to do the splicing
without going to user-space at all (after the initial setup).
Currently sockmap only fully supports TCP, UDP is partially supported
as it is only allowed to add into sockmap. This patchset, as the second
part of the original large patchset, extends sockmap with:
1) cross-protocol support with BPF_SK_SKB_VERDICT; 2) full UDP support.
On the high level, ->read_sock() is required for each protocol to support
sockmap redirection, and in order to do sock proto update, a new ops
->psock_update_sk_prot() is introduced, which is also required. And the
BPF ->recvmsg() is also needed to replace the original ->recvmsg() to
retrieve skmsg. To make life easier, we have to get rid of lock_sock()
in sk_psock_handle_skb(), otherwise we would have to implement
->sendmsg_locked() on top of ->sendmsg(), which is ugly.
Please see each patch for more details.
To see the big picture, the original patchset is available here:
https://github.com/congwang/linux/tree/sockmap
this patchset is also available:
https://github.com/congwang/linux/tree/sockmap2
---
v8: get rid of 'offset' in udp_read_sock()
add checks for skb_verdict/stream_verdict conflict
add two cleanup patches for sock_map_link()
add a new test case
v7: use work_mutex to protect psock->work
return err in udp_read_sock()
add patch 6/13
clean up test case
v6: get rid of sk_psock_zap_ingress()
add rcu work patch
v5: use INDIRECT_CALL_2() for function pointers
use ingress_lock to fix a race condition found by Jacub
rename two helper functions
v4: get rid of lock_sock() in sk_psock_handle_skb()
get rid of udp_sendmsg_locked()
remove an empty line
update cover letter
v3: export tcp/udp_update_proto()
rename sk->sk_prot->psock_update_sk_prot()
improve changelogs
v2: separate from the original large patchset
rebase to the latest bpf-next
split UDP test case
move inet_csk_has_ulp() check to tcp_bpf.c
clean up udp_read_sock()
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cong Wang [Wed, 31 Mar 2021 02:32:37 +0000 (19:32 -0700)]
selftests/bpf: Add a test case for loading BPF_SK_SKB_VERDICT
This adds a test case to ensure BPF_SK_SKB_VERDICT and
BPF_SK_STREAM_VERDICT will never be attached at the same time.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-17-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:36 +0000 (19:32 -0700)]
selftests/bpf: Add a test case for udp sockmap
Add a test case to ensure redirection between two UDP sockets work.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-16-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:35 +0000 (19:32 -0700)]
sock_map: Update sock type checks for UDP
Now UDP supports sockmap and redirection, we can safely update
the sock type checks for it accordingly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-15-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:34 +0000 (19:32 -0700)]
udp: Implement udp_bpf_recvmsg() for sockmap
We have to implement udp_bpf_recvmsg() to replace the ->recvmsg()
to retrieve skmsg from ingress_msg.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-14-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:33 +0000 (19:32 -0700)]
skmsg: Extract __tcp_bpf_recvmsg() and tcp_bpf_wait_data()
Although these two functions are only used by TCP, they are not
specific to TCP at all, both operate on skmsg and ingress_msg,
so fit in net/core/skmsg.c very well.
And we will need them for non-TCP, so rename and move them to
skmsg.c and export them to modules.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-13-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:32 +0000 (19:32 -0700)]
udp: Implement ->read_sock() for sockmap
This is similar to tcp_read_sock(), except we do not need
to worry about connections, we just need to retrieve skb
from UDP receive queue.
Note, the return value of ->read_sock() is unused in
sk_psock_verdict_data_ready(), and UDP still does not
support splice() due to lack of ->splice_read(), so users
can not reach udp_read_sock() directly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-12-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:31 +0000 (19:32 -0700)]
sock: Introduce sk->sk_prot->psock_update_sk_prot()
Currently sockmap calls into each protocol to update the struct
proto and replace it. This certainly won't work when the protocol
is implemented as a module, for example, AF_UNIX.
Introduce a new ops sk->sk_prot->psock_update_sk_prot(), so each
protocol can implement its own way to replace the struct proto.
This also helps get rid of symbol dependencies on CONFIG_INET.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-11-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:30 +0000 (19:32 -0700)]
sock_map: Introduce BPF_SK_SKB_VERDICT
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-10-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:29 +0000 (19:32 -0700)]
sock_map: Kill sock_map_link_no_progs()
Now we can fold sock_map_link_no_progs() into sock_map_link()
and get rid of sock_map_link_no_progs().
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331023237.41094-9-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:28 +0000 (19:32 -0700)]
sock_map: Simplify sock_map_link() a bit
sock_map_link() passes down map progs, but it is confusing
to see both map progs and psock progs. Make the map progs
more obvious by retrieving it directly with sock_map_progs()
inside sock_map_link(). Now it is aligned with
sock_map_link_no_progs() too.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-8-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:27 +0000 (19:32 -0700)]
skmsg: Use GFP_KERNEL in sk_psock_create_ingress_msg()
This function is only called in process context.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-7-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:26 +0000 (19:32 -0700)]
skmsg: Use rcu work for destroying psock
The RCU callback sk_psock_destroy() only queues work psock->gc,
so we can just switch to rcu work to simplify the code.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-6-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:25 +0000 (19:32 -0700)]
skmsg: Avoid lock_sock() in sk_psock_backlog()
We do not have to lock the sock to avoid losing sk_socket,
instead we can purge all the ingress queues when we close
the socket. Sending or receiving packets after orphaning
socket makes no sense.
We do purge these queues when psock refcnt reaches zero but
here we want to purge them explicitly in sock_map_close().
There are also some nasty race conditions on testing bit
SK_PSOCK_TX_ENABLED and queuing/canceling the psock work,
we can expand psock->ingress_lock a bit to protect them too.
As noticed by John, we still have to lock the psock->work,
because the same work item could be running concurrently on
different CPU's.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-5-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:24 +0000 (19:32 -0700)]
net: Introduce skb_send_sock() for sock_map
We only have skb_send_sock_locked() which requires callers
to use lock_sock(). Introduce a variant skb_send_sock()
which locks on its own, callers do not need to lock it
any more. This will save us from adding a ->sendmsg_locked
for each protocol.
To reuse the code, pass function pointers to __skb_send_sock()
and build skb_send_sock() and skb_send_sock_locked() on top.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-4-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:23 +0000 (19:32 -0700)]
skmsg: Introduce a spinlock to protect ingress_msg
Currently we rely on lock_sock to protect ingress_msg,
it is too big for this, we can actually just use a spinlock
to protect this list like protecting other skb queues.
__tcp_bpf_recvmsg() is still special because of peeking,
it still has to use lock_sock.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-3-xiyou.wangcong@gmail.com
Cong Wang [Wed, 31 Mar 2021 02:32:22 +0000 (19:32 -0700)]
skmsg: Lock ingress_skb when purging
Currently we purge the ingress_skb queue only when psock
refcnt goes down to 0, so locking the queue is not necessary,
but in order to be called during ->close, we have to lock it
here.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-2-xiyou.wangcong@gmail.com
Carlos Llamas [Thu, 1 Apr 2021 00:40:20 +0000 (00:40 +0000)]
selftests/net: so_txtime multi-host support
SO_TXTIME hardware offload requires testing across devices, either
between machines or separate network namespaces.
Split up SO_TXTIME test into tx and rx modes, so traffic can be
sent from one process to another. Create a veth-pair on different
namespaces and bind each process to an end point via [-S]ource and
[-D]estination parameters. Optional start [-t]ime parameter can be
passed to synchronize the test across the hosts (with synchorinzed
clocks).
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Frank Wunderlich [Wed, 31 Mar 2021 13:34:37 +0000 (15:34 +0200)]
net: mediatek: add flow offload for mt7623
mt7623 uses offload version 2 too
tested on Bananapi-R2
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Voon Weifeng [Wed, 31 Mar 2021 16:18:25 +0000 (00:18 +0800)]
net: stmmac: enable MTL ECC Error Address Status Over-ride by default
Turn on the MEEAO field of MTL_ECC_Control_Register by default.
As the MTL ECC Error Address Status Over-ride(MEEAO) is set by default,
the following error address fields will hold the last valid address
where the error is detected.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@intel.com>
Co-developed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Mar 2021 21:57:44 +0000 (14:57 -0700)]
Merge branch 'nxp-enetc-xdp'
Vladimir Oltean says:
====================
XDP for NXP ENETC
This series adds support to the enetc driver for the basic XDP primitives.
The ENETC is a network controller found inside the NXP LS1028A SoC,
which is a dual-core Cortex A72 device for industrial networking,
with the CPUs clocked at up to 1.3 GHz. On this platform, there are 4
ENETC ports and a 6-port embedded DSA switch, in a topology that looks
like this:
+-------------------------------------------------------------------------+
| +--------+ 1 Gbps (typically disabled) |
| ENETC PCI | ENETC |--------------------------+ |
| Root Complex | port 3 |-----------------------+ | |
| Integrated +--------+ | | |
| Endpoint | | |
| +--------+ 2.5 Gbps | | |
| | ENETC |--------------+ | | |
| | port 2 |-----------+ | | | |
| +--------+ | | | | |
| | | | | |
| +------------------------------------------------+
| | | Felix | | Felix | |
| | Switch | port 4 | | port 5 | |
| | +--------+ +--------+ |
| | |
| +--------+ +--------+ | +--------+ +--------+ +--------+ +--------+ |
| | ENETC | | ENETC | | | Felix | | Felix | | Felix | | Felix | |
| | port 0 | | port 1 | | | port 0 | | port 1 | | port 2 | | port 3 | |
+-------------------------------------------------------------------------+
| | | | | |
v v v v v v
Up to Up to Up to 4x 2.5Gbps
2.5Gbps 1Gbps
The ENETC ports 2 and 3 can act as DSA masters for the embedded switch.
Because 4 out of the 6 externally-facing ports of the SoC are switch
ports, the most interesting use case for XDP on this device is in fact
XDP_TX on the 2.5Gbps DSA master.
Nonetheless, the results presented below are for IPv4 forwarding between
ENETC port 0 (eno0) and port 1 (eno1) both configured for 1Gbps.
There are two streams of IPv4/UDP datagrams with a frame length of 64
octets delivered at 100% port load to eno0 and to eno1. eno0 has a flow
steering rule to process the traffic on RX ring 0 (CPU 0), and eno1 has
a flow steering rule towards RX ring 1 (CPU 1).
For the IPFWD test, standard IP routing was enabled in the netns.
For the XDP_DROP test, the samples/bpf/xdp1 program was attached to both
eno0 and to eno1.
For the XDP_TX test, the samples/bpf/xdp2 program was attached to both
eno0 and to eno1.
For the XDP_REDIRECT test, the samples/bpf/xdp_redirect program was
attached once to the input of eno0/output of eno1, and twice to the
input of eno1/output of eno0.
Finally, the preliminary results are as follows:
| IPFWD | XDP_TX | XDP_REDIRECT | XDP_DROP
--------+-------+--------+-------------------------
fps | 761 | 2535 | 1735 | 2783
Gbps | 0.51 | 1.71 | 1.17 | n/a
There is a strange phenomenon in my testing sistem where it appears that
one CPU is processing more than the other. I have not investigated this
too much. Also, the code might not be very well optimized (for example
dma_sync_for_device is called with the full ENETC_RXB_DMA_SIZE_XDP).
Design wise, the ENETC is a PCI device with BD rings, so it uses the
MEM_TYPE_PAGE_SHARED memory model, as can typically be seen in Intel
devices. The strategy was to build upon the existing model that the
driver uses, and not change it too much. So you will see things like a
separate NAPI poll function for XDP.
I have only tested with PAGE_SIZE=4096, and since we split pages in
half, it means that MTU-sized frames are scatter/gather (the XDP
headroom + skb_shared_info only leaves us 1476 bytes of data per
buffer). This is sub-optimal, but I would rather keep it this way and
help speed up Lorenzo's series for S/G support through testing, rather
than change the enetc driver to use some other memory model like page_pool.
My code is already structured for S/G, and that works fine for XDP_DROP
and XDP_TX, just not for XDP_REDIRECT, even between two enetc ports.
So the S/G XDP_REDIRECT is stubbed out (the frames are dropped), but
obviously I would like to remove that limitation soon.
Please note that I am rather new to this kind of stuff, I am more of a
control path person, so I would appreciate feedback.
Enough talking, on to the patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:57 +0000 (23:08 +0300)]
net: enetc: add support for XDP_REDIRECT
The driver implementation of the XDP_REDIRECT action reuses parts from
XDP_TX, most notably the enetc_xdp_tx function which transmits an array
of TX software BDs. Only this time, the buffers don't have DMA mappings,
we need to create them.
When a BPF program reaches the XDP_REDIRECT verdict for a frame, we can
employ the same buffer reuse strategy as for the normal processing path
and for XDP_PASS: we can flip to the other page half and seed that to
the RX ring.
Note that scatter/gather support is there, but disabled due to lack of
multi-buffer support in XDP (which is added by this series):
https://patchwork.kernel.org/project/netdevbpf/cover/cover.
1616179034.git.lorenzo@kernel.org/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:56 +0000 (23:08 +0300)]
net: enetc: increase RX ring default size
As explained in the XDP_TX patch, when receiving a burst of frames with
the XDP_TX verdict, there is a momentary dip in the number of available
RX buffers. The system will eventually recover as TX completions will
start kicking in and refilling our RX BD ring again. But until that
happens, we need to survive with as few out-of-buffer discards as
possible.
This increases the memory footprint of the driver in order to avoid
discards at 2.5Gbps line rate 64B packet sizes, the maximum speed
available for testing on 1 port on NXP LS1028A.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:55 +0000 (23:08 +0300)]
net: enetc: add support for XDP_TX
For reflecting packets back into the interface they came from, we create
an array of TX software BDs derived from the RX software BDs. Therefore,
we need to extend the TX software BD structure to contain most of the
stuff that's already present in the RX software BD structure, for
reasons that will become evident in a moment.
For a frame with the XDP_TX verdict, we don't reuse any buffer right
away as we do for XDP_DROP (the same page half) or XDP_PASS (the other
page half, same as the skb code path).
Because the buffer transfers ownership from the RX ring to the TX ring,
reusing any page half right away is very dangerous. So what we can do is
we can recycle the same page half as soon as TX is complete.
The code path is:
enetc_poll
-> enetc_clean_rx_ring_xdp
-> enetc_xdp_tx
-> enetc_refill_rx_ring
(time passes, another MSI interrupt is raised)
enetc_poll
-> enetc_clean_tx_ring
-> enetc_recycle_xdp_tx_buff
But that creates a problem, because there is a potentially large time
window between enetc_xdp_tx and enetc_recycle_xdp_tx_buff, period in
which we'll have less and less RX buffers.
Basically, when the ship starts sinking, the knee-jerk reaction is to
let enetc_refill_rx_ring do what it does for the standard skb code path
(refill every 16 consumed buffers), but that turns out to be very
inefficient. The problem is that we have no rx_swbd->page at our
disposal from the enetc_reuse_page path, so enetc_refill_rx_ring would
have to call enetc_new_page for every buffer that we refill (if we
choose to refill at this early stage). Very inefficient, it only makes
the problem worse, because page allocation is an expensive process, and
CPU time is exactly what we're lacking.
Additionally, there is an even bigger problem: if we let
enetc_refill_rx_ring top up the ring's buffers again from the RX path,
remember that the buffers sent to transmission haven't disappeared
anywhere. They will be eventually sent, and processed in
enetc_clean_tx_ring, and an attempt will be made to recycle them.
But surprise, the RX ring is already full of new buffers, because we
were premature in deciding that we should refill. So not only we took
the expensive decision of allocating new pages, but now we must throw
away perfectly good and reusable buffers.
So what we do is we implement an elastic refill mechanism, which keeps
track of the number of in-flight XDP_TX buffer descriptors. We top up
the RX ring only up to the total ring capacity minus the number of BDs
that are in flight (because we know that those BDs will return to us
eventually).
The enetc driver manages 1 RX ring per CPU, and the default TX ring
management is the same. So we do XDP_TX towards the TX ring of the same
index, because it is affined to the same CPU. This will probably not
produce great results when we have a tc-taprio/tc-mqprio qdisc on the
interface, because in that case, the number of TX rings might be
greater, but I didn't add any checks for that yet (mostly because I
didn't know what checks to add).
It should also be noted that we need to change the DMA mapping direction
for RX buffers, since they may now be reflected into the TX ring of the
same device. We choose to use DMA_BIDIRECTIONAL instead of unmapping and
remapping as DMA_TO_DEVICE, because performance is better this way.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:54 +0000 (23:08 +0300)]
net: enetc: add support for XDP_DROP and XDP_PASS
For the RX ring, enetc uses an allocation scheme based on pages split
into two buffers, which is already very efficient in terms of preventing
reallocations / maximizing reuse, so I see no reason why I would change
that.
+--------+--------+--------+--------+--------+--------+--------+
| | | | | | | |
| half B | half B | half B | half B | half B | half B | half B |
| | | | | | | |
+--------+--------+--------+--------+--------+--------+--------+
| | | | | | | |
| half A | half A | half A | half A | half A | half A | half A | RX ring
| | | | | | | |
+--------+--------+--------+--------+--------+--------+--------+
^ ^
| |
next_to_clean next_to_alloc
next_to_use
+--------+--------+--------+--------+--------+
| | | | | |
| half B | half B | half B | half B | half B |
| | | | | |
+--------+--------+--------+--------+--------+--------+--------+
| | | | | | | |
| half B | half B | half A | half A | half A | half A | half A | RX ring
| | | | | | | |
+--------+--------+--------+--------+--------+--------+--------+
| | | ^ ^
| half A | half A | | |
| | | next_to_clean next_to_use
+--------+--------+
^
|
next_to_alloc
then when enetc_refill_rx_ring is called, whose purpose is to advance
next_to_use, it sees that it can take buffers up to next_to_alloc, and
it says "oh, hey, rx_swbd->page isn't NULL, I don't need to allocate
one!".
The only problem is that for default PAGE_SIZE values of 4096, buffer
sizes are 2048 bytes. While this is enough for normal skb allocations at
an MTU of 1500 bytes, for XDP it isn't, because the XDP headroom is 256
bytes, and including skb_shared_info and alignment, we end up being able
to make use of only 1472 bytes, which is insufficient for the default
MTU.
To solve that problem, we implement scatter/gather processing in the
driver, because we would really like to keep the existing allocation
scheme. A packet of 1500 bytes is received in a buffer of 1472 bytes and
another one of 28 bytes.
Because the headroom required by XDP is different (and much larger) than
the one required by the network stack, whenever a BPF program is added
or deleted on the port, we drain the existing RX buffers and seed new
ones with the required headroom. We also keep the required headroom in
rx_ring->buffer_offset.
The simplest way to implement XDP_PASS, where an skb must be created, is
to create an xdp_buff based on the next_to_clean RX BDs, but not clear
those BDs from the RX ring yet, just keep the original index at which
the BDs for this frame started. Then, if the verdict is XDP_PASS,
instead of converting the xdb_buff to an skb, we replay a call to
enetc_build_skb (just as in the normal enetc_clean_rx_ring case),
starting from the original BD index.
We would also like to be minimally invasive to the regular RX data path,
and not check whether there is a BPF program attached to the ring on
every packet. So we create a separate RX ring processing function for
XDP.
Because we only install/remove the BPF program while the interface is
down, we forgo the rcu_read_lock() in enetc_clean_rx_ring, since there
shouldn't be any circumstance in which we are processing packets and
there is a potentially freed BPF program attached to the RX ring.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:53 +0000 (23:08 +0300)]
net: enetc: move up enetc_reuse_page and enetc_page_reusable
For XDP_TX, we need to call enetc_reuse_page from enetc_clean_tx_ring,
so we need to avoid a forward declaration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:52 +0000 (23:08 +0300)]
net: enetc: clean the TX software BD on the TX confirmation path
With the future introduction of some new fields into enetc_tx_swbd such
as is_xdp_tx, is_xdp_redirect etc, we need not only to set these bits
to true from the XDP_TX/XDP_REDIRECT code path, but also to false from
the old code paths.
This is because TX software buffer descriptors are kept in a ring that
is shadow of the hardware TX ring, so these structures keep getting
reused, and there is always the possibility that when a software BD is
reused (after we ran a full circle through the TX ring), the old user of
the tx_swbd had set is_xdp_tx = true, and now we are sending a regular
skb, which would need to set is_xdp_tx = false.
To be minimally invasive to the old code paths, let's just scrub the
software TX BD in the TX confirmation path (enetc_clean_tx_ring), once
we know that nobody uses this software TX BD (tx_ring->next_to_clean
hasn't yet been updated, and the TX paths check enetc_bd_unused which
tells them if there's any more space in the TX ring for a new enqueue).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:51 +0000 (23:08 +0300)]
net: enetc: add a dedicated is_eof bit in the TX software BD
In the transmit path, if we have a scatter/gather frame, it is put into
multiple software buffer descriptors, the last of which has the skb
pointer populated (which is necessary for rearming the TX MSI vector and
for collecting the two-step TX timestamp from the TX confirmation path).
At the moment, this is sufficient, but with XDP_TX, we'll need to
service TX software buffer descriptors that don't have an skb pointer,
however they might be final nonetheless. So add a dedicated bit for
final software BDs that we populate and check explicitly. Also, we keep
looking just for an skb when doing TX timestamping, because we don't
want/need that for XDP.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:50 +0000 (23:08 +0300)]
net: enetc: move skb creation into enetc_build_skb
We need to build an skb from two code paths now: from the plain RX data
path and from the XDP data path when the verdict is XDP_PASS.
Create a new enetc_build_skb function which contains the essential steps
for building an skb based on the first and last positions of buffer
descriptors within the RX ring.
We also squash the enetc_process_skb function into enetc_build_skb,
because what that function did wasn't very meaningful on its own.
The "rx_frm_cnt++" instruction has been moved around napi_gro_receive
for cosmetic reasons, to be in the same spot as rx_byte_cnt++, which
itself must be before napi_gro_receive, because that's when we lose
ownership of the skb.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 31 Mar 2021 20:08:49 +0000 (23:08 +0300)]
net: enetc: consume the error RX buffer descriptors in a dedicated function
We can and should check the RX BD errors before starting to build the
skb. The only apparent reason why things are done in this backwards
order is to spare one call to enetc_rxbd_next.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 21:38:11 +0000 (14:38 -0700)]
ipv6: remove extra dev_hold() for fallback tunnels
My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.
Fallback tunnels do call their respective ndo_init()
This leads to various reports like :
unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
Fixes:
48bb5697269a ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes:
6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes:
40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes:
7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Wed, 31 Mar 2021 08:36:02 +0000 (16:36 +0800)]
net/tipc: fix missing destroy_workqueue() on error in tipc_crypto_start()
Add the missing destroy_workqueue() before return from
tipc_crypto_start() in the error handling case.
Fixes:
1ef6f7c9390f ("tipc: add automatic session key exchange")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Mar 2021 21:48:20 +0000 (14:48 -0700)]
Merge branch 'inet-shrink-netns'
Eric Dumazet says:
====================
inet: shrink netns_ipv{4|6}
This patch series work on reducing footprint of netns_ipv4
and netns_ipv6. Some sysctls are converted to bytes,
and some fields are moves to reduce number of holes
and paddings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:13 +0000 (10:52 -0700)]
ipv6: move ip6_dst_ops first in netns_ipv6
ip6_dst_ops have cache line alignement.
Moving it at beginning of netns_ipv6
removes a 48 byte hole, and shrinks netns_ipv6
from 12 to 11 cache lines.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:12 +0000 (10:52 -0700)]
ipv6: convert elligible sysctls to u8
Convert most sysctls that can fit in a byte.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:11 +0000 (10:52 -0700)]
tcp: convert tcp_comp_sack_nr sysctl to u8
tcp_comp_sack_nr max value was already 255.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:10 +0000 (10:52 -0700)]
ipv4: convert igmp_link_local_mcast_reports sysctl to u8
This sysctl is a bool, can use less storage.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:09 +0000 (10:52 -0700)]
ipv4: convert fib_multipath_{use_neigh|hash_policy} sysctls to u8
Make room for better packing of netns_ipv4
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:08 +0000 (10:52 -0700)]
ipv4: convert udp_l3mdev_accept sysctl to u8
Reduce footprint of sysctls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:07 +0000 (10:52 -0700)]
ipv4: convert fib_notify_on_flag_change sysctl to u8
Reduce footprint of sysctls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:06 +0000 (10:52 -0700)]
inet: shrink netns_ipv4 by another cache line
By shuffling around some fields to remove 8 bytes of hole,
we can save one cache line.
pahole result before/after the patch :
/* size: 768, cachelines: 12, members: 139 */
/* sum members: 673, holes: 11, sum holes: 39 */
/* padding: 56 */
/* paddings: 2, sum paddings: 7 */
/* forced alignments: 1 */
->
/* size: 704, cachelines: 11, members: 139 */
/* sum members: 673, holes: 10, sum holes: 31 */
/* paddings: 2, sum paddings: 7 */
/* forced alignments: 1 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 31 Mar 2021 17:52:05 +0000 (10:52 -0700)]
inet: shrink inet_timewait_death_row by 48 bytes
struct inet_timewait_death_row uses two cache lines, because we want
tw_count to use a full cache line to avoid false sharing.
Rework its definition and placement in netns_ipv4 so that:
1) We add 60 bytes of padding after tw_count to avoid
false sharing, knowing that tcp_death_row will
have ____cacheline_aligned_in_smp attribute.
2) We do not risk padding before tcp_death_row, because
we move it at the beginning of netns_ipv4, even if new
fields are added later.
3) We do not waste 48 bytes of padding after it.
Note that I have not changed dccp.
pahole result for struct netns_ipv4 before/after the patch :
/* size: 832, cachelines: 13, members: 139 */
/* sum members: 721, holes: 12, sum holes: 95 */
/* padding: 16 */
/* paddings: 2, sum paddings: 55 */
->
/* size: 768, cachelines: 12, members: 139 */
/* sum members: 673, holes: 11, sum holes: 39 */
/* padding: 56 */
/* paddings: 2, sum paddings: 7 */
/* forced alignments: 1 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Mar 2021 21:34:09 +0000 (14:34 -0700)]
Merge branch 'net-coding-style'
Weihang Li says:
====================
net: fix some coding style issues
Do some cleanups according to the coding style of kernel, including wrong
print type, redundant and missing spaces and so on.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Yangyang Li [Wed, 31 Mar 2021 08:18:34 +0000 (16:18 +0800)]
net: lpc_eth: fix format warnings of block comments
Fix the following format warning:
1. Block comments use * on subsequent lines
2. Block comments use a trailing */ on a separate line
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yixing Liu [Wed, 31 Mar 2021 08:18:33 +0000 (16:18 +0800)]
net: toshiba: fix the trailing format of some block comments
Use a trailling */ on a separate line for block comments.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yixing Liu [Wed, 31 Mar 2021 08:18:32 +0000 (16:18 +0800)]
net: ocelot: fix a trailling format issue with block comments
Use a tralling */ on a separate line for block comments.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yixing Liu [Wed, 31 Mar 2021 08:18:31 +0000 (16:18 +0800)]
net: amd: correct some format issues
There should be a blank line after declarations.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yixing Liu [Wed, 31 Mar 2021 08:18:30 +0000 (16:18 +0800)]
net: amd8111e: fix inappropriate spaces
Delete unncecessary spaces and add some reasonable spaces according to the
coding-style of kernel.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yixing Liu [Wed, 31 Mar 2021 08:18:29 +0000 (16:18 +0800)]
net: ena: remove extra words from comments
Remove the redundant "for" from the commment.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yixing Liu [Wed, 31 Mar 2021 08:18:28 +0000 (16:18 +0800)]
net: ena: fix inaccurate print type
Use "%u" to replace "hu%".
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew Wilcox (Oracle) [Wed, 31 Mar 2021 04:36:42 +0000 (05:36 +0100)]
qrtr: Convert qrtr_ports from IDR to XArray
The XArray interface is easier for this driver to use. Also fixes a
bug reported by the improper use of GFP_ATOMIC.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wan Jiabing [Wed, 31 Mar 2021 02:35:53 +0000 (10:35 +0800)]
net: ethernet: stmicro: Remove duplicate struct declaration
struct stmmac_safety_stats is declared twice. One has been
declared at 29th line. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen [Tue, 2 Mar 2021 18:15:43 +0000 (10:15 -0800)]
ice: Correct comment block style
The following is reported by checkpatch, correct it.
-----------------------------------------------
drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
-----------------------------------------------
WARNING:NETWORKING_BLOCK_COMMENT_STYLE: networking block comments don't use an empty /* line, use /* Comment...
FILE: drivers/net/ethernet/intel/ice/ice_adminq_cmd.h:1428:
+/*
+ * Send to PF command (indirect 0x0801) ID is only used by PF
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Bruce Allan [Tue, 2 Mar 2021 18:15:42 +0000 (10:15 -0800)]
ice: cleanup style issues
A few style issues reported by checkpatch have snuck into the code; resolve
the style issues.
COMPLEX_MACRO: Macros with complex values should be enclosed in parentheses
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Anirudh Venkataramanan [Tue, 2 Mar 2021 18:15:37 +0000 (10:15 -0800)]
ice: Consolidate VSI state and flags
struct ice_vsi has two fields, state and flags which seem to
be serving the same purpose. Consolidate them into one field
'state'.
enum ice_state is used to represent state information of the PF.
While some of these enum values can be use to represent VSI state,
it makes more sense to represent VSI state with its own enum. So
derive a new enum ice_vsi_state from ice_vsi_flags and ice_state
and use it. Also rename enum ice_state to ice_pf_state for clarity.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Tue, 2 Mar 2021 18:15:36 +0000 (10:15 -0800)]
ice: Refactor ice_set/get_rss into LUT and key specific functions
Currently ice_set/get_rss are used to set/get the RSS LUT and/or RSS
key. However nearly everywhere these functions are called only the LUT
or key are set/get. Also, making this change reduces how many things
ice_set/get_rss are doing. Fix this by adding ice_set/get_rss_lut and
ice_set/get_rss_key functions.
Also, consolidate all calls for setting/getting the RSS LUT and RSS Key
to use ice_set/get_rss_lut() and ice_set/get_rss_key().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Tue, 2 Mar 2021 18:15:35 +0000 (10:15 -0800)]
ice: Refactor get/set RSS LUT to use struct parameter
Update ice_aq_get_rss_lut() and ice_aq_set_rss_lut() to take a new
structure ice_aq_get_set_rss_params instead of passing individual
parameters. This is done for 2 reasons:
1. Reduce the number of parameters passed to the functions.
2. Reduce the amount of change required if the arguments ever need to be
updated in the future.
Also, reduce duplicate code that was checking for an invalid vsi_handle
and lut parameter by moving the checks to the lower level
__ice_aq_get_set_rss_lut().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Brett Creeley [Tue, 2 Mar 2021 18:15:33 +0000 (10:15 -0800)]
ice: Change ice_vsi_setup_q_map() to not depend on RSS
Currently, ice_vsi_setup_q_map() depends on the VSI's rss_size. However,
the Rx Queue Mapping section of the VSI context has no dependency on RSS.
Instead, limit the maximum number of Rx queues per TC based on the Rx
Queue mapping section of the VSI context, which currently allows for up
to 256 Rx queues per TC.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Qi Zhang [Tue, 2 Mar 2021 18:12:11 +0000 (10:12 -0800)]
ice: rename ptype bitmap
Align all ptype bitmap to follow ice_ptypes_xxx prefix.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Bruce Allan [Tue, 2 Mar 2021 18:12:10 +0000 (10:12 -0800)]
ice: correct memory allocation call
Use *malloc() instead of *calloc() when allocating only a single object as
opposed to an array of objects.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Anirudh Venkataramanan [Tue, 2 Mar 2021 18:12:09 +0000 (10:12 -0800)]
ice: Check for bail out condition early
Check for bail out condition before calling ice_aq_sff_eeprom
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Bruce Allan [Tue, 2 Mar 2021 18:12:08 +0000 (10:12 -0800)]
ice: remove unnecessary duplicated AQ command flag setting
Commit
a012dca9f7a2 ("ice: add ethtool -m support for reading i2c eeprom
modules") unnecessarily added the ICE_AQ_FLAG_BUF flag to the descriptor
when sending the indirect Read/Write SFF EEPROM AQ command. The flag is
already added later in the code flow for all indirect AQ commands, i.e.
commands that provide an additional data buffer.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paul Greenwalt [Tue, 2 Mar 2021 18:12:07 +0000 (10:12 -0800)]
ice: change link misconfiguration message
Change link misconfiguration message since the configuration
could be intended by the user.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Paul M Stillwell Jr [Tue, 2 Mar 2021 18:12:05 +0000 (10:12 -0800)]
ice: handle increasing Tx or Rx ring sizes
There is an issue when the Tx or Rx ring size increases using
'ethtool -L ...' where the new rings don't get the correct ITR
values because when we rebuild the VSI we don't know that some
of the rings may be new.
Fix this by looking at the original number of rings and
determining if the rings in ice_vsi_rebuild_set_coalesce()
were not present in the original rings received in
ice_vsi_rebuild_get_coalesce().
Also change the code to return an error if we can't allocate
memory for the coalesce data in ice_vsi_rebuild().
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dan Nowlin [Tue, 2 Mar 2021 18:12:04 +0000 (10:12 -0800)]
ice: Update to use package info from ice segment
There are two package versions in the package binary. Today, these two
version numbers are the same. However, in the future that may change.
Update code to use the package info from the ice segment metadata
section, which is the package information that is actually downloaded to
the firmware during the download package process.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Anirudh Venkataramanan [Tue, 2 Mar 2021 18:12:03 +0000 (10:12 -0800)]
ice: Delay netdev registration
Once a netdev is registered, the corresponding network interface can
be immediately used by userspace utilities (like say NetworkManager).
This can be problematic if the driver technically isn't fully up yet.
Move netdev registration to the end of probe, as by this time the
driver data structures and device will be initialized as expected.
However, delaying netdev registration causes a failure in the aRFS flow
where netdev->reg_state == NETREG_REGISTERED condition is checked. It's
not clear why this check was added to begin with, so remove it.
Local testing didn't indicate any issues with this change.
The state bit check in ice_open was put in as a stop-gap measure to
prevent a premature interface up operation. This is no longer needed,
so remove it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Benita Bose [Tue, 2 Mar 2021 18:12:02 +0000 (10:12 -0800)]
ice: Add Support for XPS
Enable and configure XPS. The driver code implemented sets up the Transmit
Packet Steering Map, which in turn will be used by the kernel in queue
selection during Tx.
Signed-off-by: Benita Bose <benita.bose@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Eric Dumazet [Tue, 30 Mar 2021 06:45:51 +0000 (23:45 -0700)]
ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods
Same reasons than for the previous commits :
6289a98f0817 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
40cb881b5aaa ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
7f700334be9a ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
[1]
WARNING: CPU: 1 PID: 21059 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 21059 Comm: syz-executor.4 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:
ffffc900025aefe8 EFLAGS:
00010282
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000040000 RSI:
ffffffff815c51f5 RDI:
fffff520004b5def
RBP:
0000000000000004 R08:
0000000000000000 R09:
0000000000000000
R10:
ffffffff815bdf8e R11:
0000000000000000 R12:
ffff888023488568
R13:
ffff8880254e9000 R14:
00000000dfd82cfd R15:
ffff88802ee2d7c0
FS:
00007f13bc590700(0000) GS:
ffff8880b9c00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f0943e74000 CR3:
0000000025273000 CR4:
00000000001506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6_tnl_dev_uninit+0x370/0x3d0 net/ipv6/ip6_tunnel.c:387
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6_tnl_create2+0x1b5/0x400 net/ipv6/ip6_tunnel.c:263
ip6_tnl_newlink+0x312/0x580 net/ipv6/ip6_tunnel.c:2052
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes:
919067cc845f ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Mar 2021 21:15:23 +0000 (14:15 -0700)]
Merge branch 'ethtool-fec-netlink'
Jakub Kicinski says:
====================
ethtool: support FEC configuration over netlink
This series adds support for the equivalents of ETHTOOL_GFECPARAM
and ETHTOOL_SFECPARAM over netlink.
As a reminder - this is an API which allows user to query current
FEC mode, as well as set FEC manually if autoneg is disabled.
It does not configure anything if autoneg is enabled (that said
few/no drivers currently reject .set_fecparam calls while autoneg
is disabled, hopefully FW will just ignore the settings).
The existing functionality is mostly preserved in the new API.
The ioctl interface uses a set of flags, and link modes to tell
user which modes are supported. Here is how the flags translate
to the new interface (skipping descriptions for actual FEC modes):
ioctl flag | description | new API
================================================================
ETHTOOL_FEC_OFF | disabled (supported) | \
ETHTOOL_FEC_RS | | ` link mode bitset
ETHTOOL_FEC_BASER | | / .._A_FEC_MODES
ETHTOOL_FEC_LLRS | | /
ETHTOOL_FEC_AUTO | pick based on cable | bool .._A_FEC_AUTO
ETHTOOL_FEC_NONE | not supported | no bit, no AUTO reported
Since link modes are already depended on (although somewhat implicitly)
for expressing supported modes - the new interface uses them for
the manual configuration, as well as uses link mode bit number
to communicate the active mode.
Use of link modes allows us to define any number of FEC modes we want,
and reuse the strset we already have defined.
Separating AUTO as its own attribute is the biggest changed compared
to the ioctl. It means drivers can no longer report AUTO as the
active FEC mode because there is no link mode for AUTO.
active_fec == AUTO makes little sense in the first place IMHO,
active_fec should be the actual mode, so hopefully this is fine.
The other minor departure is that None is no longer explicitly
expressed in the API. But drivers are reasonable in handling of
this somewhat pointless bit, so I'm not expecting any issues there.
One extension which could be considered would be moving active FEC
to ETHTOOL_MSG_LINKMODE_*, but then why not move all of FEC into
link modes? I don't know where to draw the line.
netdevsim support and a simple self test are included.
Next step is adding stats similar to the ones added for pause.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
,
Jakub Kicinski [Tue, 30 Mar 2021 03:59:54 +0000 (20:59 -0700)]
selftests: ethtool: add a netdevsim FEC test
Test FEC settings, iterate over configs.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 30 Mar 2021 03:59:53 +0000 (20:59 -0700)]
netdevsim: add FEC settings support
Add support for ethtool FEC and some ethtool error injection.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 30 Mar 2021 03:59:52 +0000 (20:59 -0700)]
ethtool: support FEC settings over netlink
Add FEC API to netlink.
This is not a 1-to-1 conversion.
FEC settings already depend on link modes to tell user which
modes are supported. Take this further an use link modes for
manual configuration. Old struct ethtool_fecparam is still
used to talk to the drivers, so we need to translate back
and forth. We can revisit the internal API if number of FEC
encodings starts to grow.
Enforce only one active FEC bit (by using a bit position
rather than another mask).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislav Fomichev [Mon, 29 Mar 2021 22:31:43 +0000 (15:31 -0700)]
tools/resolve_btfids: Fix warnings
* make eprintf static, used only in main.c
* initialize ret in eprintf
* remove unused *tmp
v3:
* remove another err (Song Liu)
v2:
* remove unused 'int err = -1'
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210329223143.3659983-1-sdf@google.com
KP Singh [Tue, 23 Mar 2021 01:47:52 +0000 (01:47 +0000)]
selftests/bpf: Add an option for a debug shell in vmtest.sh
The newly introduced -s command line option starts an interactive shell.
If a command is specified, the shell is started after the command
finishes executing. It's useful to have a shell especially when
debugging failing tests or developing new tests.
Since the user may terminate the VM forcefully, an extra "sync" is added
after the execution of the command to persist any logs from the command
into the log file.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210323014752.3198283-1-kpsingh@kernel.org
Eric Lin [Wed, 31 Mar 2021 01:04:17 +0000 (09:04 +0800)]
net: ethernet: Fix typo of 'network' in comment
Signed-off-by: Eric Lin <dslin1010@gmail.com>
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Tue, 30 Mar 2021 06:58:41 +0000 (09:58 +0300)]
mlxsw: spectrum_router: Only perform atomic nexthop bucket replacement when requested
When cleared, the 'force' parameter in nexthop bucket replacement
notifications indicates that a driver should try to perform an atomic
replacement. Meaning, only update the contents of the bucket if it is
inactive.
Since mlxsw only queries buckets' activity once every second, there is
no point in trying an atomic replacement if the idle timer interval is
smaller than 1 second.
Currently, mlxsw ignores the original value of 'force' and will always
try an atomic replacement if the idle timer is not smaller than 1
second.
Fix this by taking the original value of 'force' into account and never
promoting a non-atomic replacement to an atomic one.
Fixes:
617a77f044ed ("mlxsw: spectrum_router: Add nexthop bucket replacement support")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 31 Mar 2021 00:42:23 +0000 (17:42 -0700)]
Merge branch 'mptcp-subflow-disconnected'
Mat Martineau says:
====================
MPTCP: Allow initial subflow to be disconnected
An MPTCP connection is aggregated from multiple TCP subflows, and can
involve multiple IP addresses on either peer. The addresses used in the
initial subflow connection are assigned address id 0 on each side of the
link. More addresses can be added and shared with the peer using address
IDs of 1 or larger. MPTCP in Linux shares non-zero address IDs across
all MPTCP connections in a net namespace, which allows userspace to
manage subflow connections across a number of sockets. However, this
makes the address with id 0 a special case, since the IP address
associated with id 0 is potentially different for each socket.
This patch set allows the initial subflow to be disconnected when
userspace specifies an address to remove using both id 0 and an IP
address, or when the peer sends an RM_ADDR for id 0.
Patches 1 and 3 implement the change for requests from the peer and
userspace, respectively.
Patch 2 consolidates some code for disconnecting subflows.
Patches 4-6 update the self tests to cover removal of subflows using
address id 0.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>