Simon Glass [Mon, 27 Feb 2012 10:52:34 +0000 (10:52 +0000)]
fdt: Tidy up a few fdtdec problems
This fixes five trivial issues in fdtdec.c:
1. fdtdec_get_is_enabled() doesn't really need a default value
2. The fdt must be word-aligned, since otherwise it will fail on ARM
3. The compat_names[] array is missing its first element. This is needed
only because the first fdt_compat_id is defined to be invalid.
4. Added a header prototype for fdtdec_next_compatible()
5. Change fdtdec_next_alias() to only increment its 'upto' parameter
on success, to make the display error messages in the caller easier.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Tue, 17 Jan 2012 08:20:51 +0000 (08:20 +0000)]
fdt: Add tests for fdtdec
The fdtdec_find_aliases_for_id() function is complicated enough that
it really should have some tests. This does not necessarily need to be
committed to U-Boot, but it might be useful.
(note there are a few minor inconsistencies with this patch which will be
cleaned up when the USB series is applied)
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Simon Glass [Tue, 17 Jan 2012 08:20:50 +0000 (08:20 +0000)]
fdt: Add fdtdec_find_aliases() to deal with alias nodes
Stephen Warren pointed out that we should use nodes whether or not they
have an alias in the /aliases section. The aliases section specifies the
order so far as it can, but is not essential. Operating without alisses
is useful when the enumerated order of nodes does not matter (admittedly
rare in U-Boot).
This is considerably more complex, and it is important to keep this
complexity out of driver code. This patch creates a function
fdtdec_find_aliases() which returns an ordered list of node offsets
for a particular compatible ID, taking account of alias nodes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tom Warren [Fri, 17 Feb 2012 06:01:21 +0000 (06:01 +0000)]
arm: Tegra2: Fix ELDK42 gcc failure with inline asm stack pointer load
The 4.2.2 gcc in the ELDK42 release doesn't like the direct SP
load using a constant in tegra2_start. Change it to use a load
thru another reg using mov sp, %0 : : "r"(CONST).
Tested on my Seaboard T20-A03, U-Boot loads and runs OK. Also
compiled all tegra2 builds with both gcc 4.2.2 and 4.4.1 OK.
Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Eric Nelson [Thu, 15 Mar 2012 18:33:25 +0000 (18:33 +0000)]
net: fec_mxc: allow use with cache enabled
Ensure that transmit and receive buffers are cache-line aligned.
Invalidate cache for each packet as received, update receive buffer
descriptors one cache line at a time, flush cache before transmitting.
Original patch by Marek:
http://lists.denx.de/pipermail/u-boot/2012-February/117695.html
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Eric Nelson [Thu, 15 Mar 2012 18:33:24 +0000 (18:33 +0000)]
net: force PKTALIGN to ARCH_DMA_MINALIGN
This will prevent the need for architectures whose DMA alignment
is greater than 32 to have bounce buffers.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Marek Vasut [Thu, 15 Mar 2012 18:33:23 +0000 (18:33 +0000)]
i.MX28: Enable caches by default
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Thu, 15 Mar 2012 18:33:22 +0000 (18:33 +0000)]
i.MX28: Make use of the bounce buffer
This allows i.MX28 MMC host to fully utilize DMA transfers and caches, greatly
improving speed.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Marek Vasut [Thu, 15 Mar 2012 18:33:21 +0000 (18:33 +0000)]
i.MX28: Do data transfers via DMA in MMC driver
This utilizes the newly introduced bounce buffers in the MMC layer.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Marek Vasut [Thu, 15 Mar 2012 18:41:35 +0000 (18:41 +0000)]
MMC: Implement generic bounce buffer
This implements generic bounce buffer at the end of MMC command submission
chain. Therefore if unaligned data are passed, they are copied. This stuff
should be pushed down into the MMC subsystem to squash all places generating
these unaligned data.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andy Fleming <afleming@gmail.com>
Marek Vasut [Thu, 15 Mar 2012 18:33:19 +0000 (18:33 +0000)]
i.MX28: Add cache support to MXS NAND driver
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Thu, 15 Mar 2012 18:33:18 +0000 (18:33 +0000)]
i.MX28: Add cache support into the APBH DMA driver
The desc_append() now flushes descriptors into RAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Marek Vasut [Thu, 15 Mar 2012 18:33:17 +0000 (18:33 +0000)]
ARM926EJS: Implement cache operations
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Anatolij Gustschin [Wed, 28 Mar 2012 05:38:42 +0000 (05:38 +0000)]
board/vpac270/onenand.c: Fix build errors
Building for vpac270_ond_256 configuration fails:
arch/arm/lib/libarm.o: In function `icache_disable':
/home/ag/git/u-boot/arch/arm/lib/cache-cp15.c:156: multiple
definition of `icache_disable'
board/vpac270/libvpac270.o:/home/ag/git/u-boot/board/vpac270/onenand.c:65:
first defined here
arch/arm/lib/libarm.o: In function `dcache_disable':
/home/ag/git/u-boot/arch/arm/lib/cache-cp15.c:188: multiple
definition of `dcache_disable'
board/vpac270/libvpac270.o:/home/ag/git/u-boot/board/vpac270/onenand.c:66:
first defined here
make[1]: *** [/home/ag/git/u-boot/spl/u-boot-spl] Error 1
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Anatolij Gustschin [Wed, 28 Mar 2012 02:56:30 +0000 (02:56 +0000)]
nhk8815: fix build errors
Fix:
common/libcommon.o: In function `cread_line':
/home/ag/git/u-boot/common/main.c:695: undefined reference to `get_ticks'
/home/ag/git/u-boot/common/main.c:695: undefined reference to `get_tbclk'
/home/ag/git/u-boot/common/main.c:698: undefined reference to `get_ticks'
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Alessandro Rubini <rubini@unipv.it>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Alessandro Rubini <rubini@unipv.it>
Andreas Bießmann [Tue, 13 Mar 2012 05:01:51 +0000 (05:01 +0000)]
atmel-boards: add missing atmel_mci.h
commit
72fa467988e7944407a634ddc4bc6a2df685c04c moved atmel_mci_init() into
include/atmel_mci.h. Some AT91 boards are also using this interface and need
to include atmel_mci.h now.
This patch fixes MAKEALL complaints like this:
---8<---
Configuring for ethernut5 - Board: ethernut5, Options: AT91SAM9XE
ethernut5.c: In function 'board_mmc_init':
ethernut5.c:235:2: warning: implicit declaration of function 'atmel_mci_init' [-Wimplicit-function-declaration]
--->8---
Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
CC: Albert Aribaud <albert.u.boot@aribaud.net>
CC: Reinhard Meyer <u-boot@emk-elektronik.de>
CC: egnite GmbH <info@egnite.de>
Rob Herring [Wed, 1 Feb 2012 16:57:57 +0000 (16:57 +0000)]
ARM: highbank: setup env from boot source register
Add support to read the boot src register and set bootcmd env from the
selected bootcmdX env setting.
Based on Linkstation boot choice selection.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Jason Hobbs [Wed, 1 Feb 2012 16:57:56 +0000 (16:57 +0000)]
ARM: highbank: change env config to use nvram
Update the highbank config to use env from NVRAM. Also remove extra env
settings as they are not used unless the default env is used.
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Wed, 1 Feb 2012 16:57:55 +0000 (16:57 +0000)]
ARM: highbank: add reset support
Implement reset for highbank platform. Reset is triggered via a wfi
instruction, so enabling armv7 for the compiler is necessary.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Wed, 1 Feb 2012 16:57:54 +0000 (16:57 +0000)]
ARM: highbank: Add boot counter support
Add boot counter support using an sysreg which is persistent across reset.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Wed, 1 Feb 2012 16:57:53 +0000 (16:57 +0000)]
ARM: highbank: change TEXT_BASE to 0x8000
Make some space at the beginning of RAM so the FDT can be loaded to a
known fixed address at 0x1000.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Wed, 1 Feb 2012 16:57:52 +0000 (16:57 +0000)]
ARM: highbank: fix us_to_tick calculation
udelay calls were off due to failing to convert us to ns. Fix this and drop
the unnecessary shifts since NS_PER_TICK is only 7ns.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Tue, 21 Feb 2012 12:52:27 +0000 (12:52 +0000)]
ARM: highbank: add missing get_tbclk
The get_tbclk function was missing and the recent commit "common: add
possibility for readline_into_buffer timeout" makes it required.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Tue, 21 Feb 2012 12:52:26 +0000 (12:52 +0000)]
ARM: highbank: fix warning for calxedaxgmac_initialize
Add include of netdev.h to pick-up declaration of calxedaxgmac_initialize.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Rob Herring [Wed, 1 Feb 2012 12:58:49 +0000 (12:58 +0000)]
net: calxedaxgmac: fix build due to missing __aligned definition
Include linux/compiler.h to fix build error due to missing __aligned
definition.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Chander Kashyap [Fri, 2 Mar 2012 03:25:34 +0000 (03:25 +0000)]
EXYNOS: Add structure for Exynos4 DMC
Add exynos4_dmc structure in dmc.h for exynos4 dram controllor(DMC).
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Doug Anderson [Mon, 13 Feb 2012 07:38:05 +0000 (07:38 +0000)]
EXYNOS: SMDK5250: Support all 4 UARTs
This properly configures the mux to enable all UARTs.
This also fixes things so that we don't configure balls XUCTSN_1 and
XURTSN_1 as UART1 configuration (RTS/CTS), since they aren't
connected.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Chander kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
David Müller (ELSOFT AG) [Thu, 22 Dec 2011 01:16:37 +0000 (01:16 +0000)]
ARM: fix s3c2410 timer code
This patch fixes the s3c24x0 timer code to work with the ARM
relocation feature.
Signed-off-by: David Mueller <d.mueller@elsoft.ch>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Heiko Schocher [Wed, 7 Mar 2012 04:10:00 +0000 (04:10 +0000)]
ARM: davinci: fixes for cam_enc_4xx board
- change CONFIG_ENV_RANGE to contain 2 nand erase blocks,
one for bad block reserve.
- remove from the envvariable "img_writeramdisk" the
ubifsmount command, as it is not needed.
- erase the hole mtd partition containing u-boot
- save environment variable "dvn_app_vers" and "dvn_boot_vers"
only after installing the new image.
changes requested from Marek Vasut:
- arm, davinci: fix eldk-4.2 warnings for cam_enc_4xx board
- get rid of run_command2 usage
needed since patch:
commit
009dde1955583e306cf904c864068f3acb0db499
Author: Simon Glass <sjg@chromium.org>
Date: Tue Feb 14 19:59:20 2012 +0000
Rename run_command2() to run_command()
is now in mainline.
- add CONFIG_SPL_LIBGENERIC_SUPPORT support
- remove CONFIG_CMD_PXE support
- fix warning:
cam_enc_4xx.c: In function 'menu_handle':
cam_enc_4xx.c:609: warning: dereferencing type-punned pointer
will break strict-aliasing rules
- fix error:
arm-linux-ld: u-boot-spl: Not enough room for program headers,
try linking with -N
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <tom.rini@gmail.com>
Cc: Fletzer Martin <Martin.Fletzer@ait.ac.at>
Cc: Wolfgang Denk <wd@denx.de>
jacopo mondi [Wed, 2 Mar 2011 05:13:22 +0000 (05:13 +0000)]
omap3_spi: receive transmit mode
Implementation of receive-transmit mode for
omap3 MCSPI.
Introduces full duplex communication, needed by
some spi devices (such as enc28j60).
Signed-off-by: jacopo mondi <mondi@cs.unibo.it> <j.mondi@voltaelectronics.com>
Christian Riesch [Sun, 25 Mar 2012 22:01:49 +0000 (22:01 +0000)]
calimain, enbw_cmc: Fix typo in comments
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@ti.com>
Stefano Babic [Wed, 5 Oct 2011 03:08:24 +0000 (03:08 +0000)]
Davinci: ea20: use gpio framework to access gpios
Drop direct access to SOC's registers and use
the function of the GPIO driver for da8xx.
[Tom: Remove gpio[68]_base as it's now unused]
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: dzu@denx.de
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Stefano Babic [Wed, 21 Mar 2012 00:14:25 +0000 (00:14 +0000)]
OMAP3: mt_ventoux: sets its own mtdparts
Signed-off-by: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Stefano Babic [Wed, 21 Mar 2012 00:14:24 +0000 (00:14 +0000)]
OMAP3: mt_ventoux: updated timing for FPGA
Fix chipselect timing for FPGA
Signed-off-by: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Grazvydas Ignotas [Mon, 19 Mar 2012 03:37:40 +0000 (03:37 +0000)]
twl4030: fix potential power supply handling issues
twl4030_pmrecv_vsel_cfg currently first sets up device group (effectively
enabling the supply), and only then sets vsel (selects voltage). This could
lead to wrong voltage for a short time, or even long time if second i2c
write fails.
Fix this by writing vsel first and device group after that. Also
introduce error checking to not enable the supply if we failed to set
the voltage, and start logging errors as power supply problems are
usually important.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Stefano Babic [Wed, 21 Mar 2012 23:56:17 +0000 (23:56 +0000)]
NAND: TI: fix warnings in omap_gpmc.c
The following warnings are reported for boards using SOFT ECC.
omap_gpmc.c:33:30: warning: 'hw_nand_oob' defined but not used
omap_gpmc.c:78:13: warning: 'omap_hwecc_init' defined but not used
omap_gpmc.c:116:12: warning: 'omap_correct_data' defined but not used
omap_gpmc.c:182:12: warning: 'omap_calculate_ecc' defined but not used
omap_gpmc.c:208:13: warning: 'omap_enable_hwecc' defined but not used
Signed-off-by: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Scott Wood <scottwood@freescale.com>
Tom Rini [Thu, 15 Mar 2012 04:01:46 +0000 (04:01 +0000)]
cam_enc_4xx: Rename 'images' to 'imgs'
To avoid a conflict with common/cmd_bootm.c's 'images' (which is
exposed as part of the Linux SPL series), rename the board-specific
'images' to 'imgs'.
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:45 +0000 (04:01 +0000)]
arm: Add Prep subcommand support to bootm
Adds prep subcommand to bootm implementation of ARM. When bootm is called
with the subcommand prep the function stops right after ATAGS creation and
before announce_and_cleanup.
This is used in command "cmd_spl export"
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
Stefano Babic [Thu, 15 Mar 2012 04:01:44 +0000 (04:01 +0000)]
OMAP3: twister: add support to boot Linux from SPL
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <tom.rini@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Simon Schwarz <simonschwarzcor@gmail.com>
Stefano Babic [Thu, 15 Mar 2012 04:01:43 +0000 (04:01 +0000)]
SPL: call cleanup_before_linux() before booting Linux
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <tom.rini@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Simon Schwarz <simonschwarzcor@gmail.com>
Stefano Babic [Thu, 15 Mar 2012 04:01:42 +0000 (04:01 +0000)]
OMAP3: SPL: do not call I2C init if no I2C is set.
Call i2c initialization in spl_board_init only if I2C
is configured for the board.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <tom.rini@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Simon Schwarz <simonschwarzcor@gmail.com>
Stefano Babic [Thu, 15 Mar 2012 04:01:41 +0000 (04:01 +0000)]
Add cache functions to SPL for armv7
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <tom.rini@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Simon Schwarz <simonschwarzcor@gmail.com>
Simon Schwarz [Thu, 15 Mar 2012 04:01:40 +0000 (04:01 +0000)]
devkit8000: Implement and activate direct OS boot
- Implements spl_start_uboot() for devkit8000
- Add configs to activate direct OS boot from SPL
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:39 +0000 (04:01 +0000)]
omap/spl: change output of spl_parse_image_header
This only outputs "Assuming u-boot.bin..." if debug is active.
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:38 +0000 (04:01 +0000)]
omap-common/spl: Add linux boot to SPL
This adds Linux booting to the SPL
This depends on CONFIG_MACH_TYPE patch by Igor Grinberg
(http://article.gmane.org/gmane.comp.boot-loaders.u-boot/105809)
Related CONFIGs:
CONFIG_SPL_OS_BOOT
Activates/Deactivates the OS booting feature
CONFIG_SPL_OS_BOOT_KEY
defines the IO-pin number u-boot switch - if pressed u-boot is
booted
CONFIG_SYS_NAND_SPL_KERNEL_OFFS
Offset in NAND of direct boot kernel image to use in SPL
CONFIG_SYS_SPL_ARGS_ADDR
Address where the kernel boot arguments are expected - this is
normaly RAM-begin + 0x100
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:37 +0000 (04:01 +0000)]
devkit8000/spl: init GPMC for dm9000 in SPL
Linux crashes if the GPMC isn't configured for the dm9000.
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:36 +0000 (04:01 +0000)]
omap-common: Add NAND SPL linux booting
This implements booting of Linux from NAND in SPL
Related config parameters:
CONFIG_SYS_NAND_SPL_KERNEL_OFFS
Offset in NAND of direct boot kernel image to use in SPL
CONFIG_SYS_SPL_ARGS_ADDR
Address where the kernel boot arguments are expected - this is
normally RAM-start + 0x100 (on ARM)
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:35 +0000 (04:01 +0000)]
devkit8000: add config for spl command
This adds some configs for devkit8000 to use the new spl command
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
CC: Tom Rini <tom.rini@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Wolfgang Denk <wd@denx.de>
Simon Schwarz [Thu, 15 Mar 2012 04:01:34 +0000 (04:01 +0000)]
Add cmd_spl command
This adds a spl command to the u-boot.
Related config:
CONFIG_CMD_SPL
activate/deactivate the command
CONFIG_CMD_SPL_NAND_OFS
Offset in NAND to use
Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Tom Rini <tom.rini@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
Fabio Estevam [Mon, 19 Mar 2012 13:41:25 +0000 (13:41 +0000)]
mx53ard: Initialize return code with error
The variable "rc" is the return of board_eth_init() function. Initialize
it with an error code, so that this function can return an error when
CONFIG_SMC911X is not set.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Wed, 21 Mar 2012 05:42:45 +0000 (05:42 +0000)]
mx53: Make PLL2 to be the parent of UART clock
Change the parent UART clock to be PLL2, so that U-boot can also boot
a Freescale 2.6.35 kernel for mx53.
FSL kernel and U-boot changed the UART parent from PLL3 to PLL2 to avoid
conflicts with IPU clocks, so that the video resolution can be changed
without affecting the UART clock.
On a 2.6.35 kernel the serial console is messed up after IPU driver is loaded
and this patch fixes this problem.
Tested on a mx53loco board booting a FSL kernel and also a mainline kernel.
Reported-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Fabio Estevam [Thu, 22 Mar 2012 14:29:04 +0000 (14:29 +0000)]
configs: imx: Use CONFIG_SF_DEFAULT_CS
CONFIG_SPI_FLASH_CS is not used anywhere.
Use CONFIG_SF_DEFAULT_CS instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Thu, 22 Mar 2012 14:29:03 +0000 (14:29 +0000)]
mx28evk: Provide default values for SPI bus and chip select
Provide default values for SPI bus and chip select.
This allows the command "sf probe" to work without passing SPI bus and chip
select numbers as arguments.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Fabio Estevam [Mon, 19 Mar 2012 12:36:10 +0000 (12:36 +0000)]
USB: ehci-mx6: Add proper IO accessors
Add proper IO accessors for mx6 usb registers.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Jason Liu <r64343@freescale.com>
Fabio Estevam [Tue, 20 Mar 2012 04:21:45 +0000 (04:21 +0000)]
mx6: Read silicon revision from register
Instead of hardcoding the mx6 silicon revision, read it in run-time.
Also, besides the silicon version print the mx6 variant type: quad,dual/solo
or solo-lite.
Tested on a mx6qsabrelite, where it shows:
CPU: Freescale i.MX6Q rev1.0 at 792 MHz
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Jason Liu <r64343@freescale.com>
Marek Vasut [Fri, 16 Mar 2012 11:32:43 +0000 (11:32 +0000)]
i.MX28: Drop __naked function from spl_mem_init
Instead of compiling the function and using the result as a constant, simply use
the constant.
NOTE: This patch works around bug:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=52546
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Fabio Estevam [Sun, 18 Mar 2012 17:23:35 +0000 (17:23 +0000)]
mxs_spi: Return proper timeout error
Instead of returning -1, it is preferred to return -ETIMEDOUT in case of timeouts.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Marek Vasut [Mon, 30 Jan 2012 14:05:39 +0000 (14:05 +0000)]
i.MX28: Make the stabilization delays shorter
Cut down the VDDIO/VDDA regulator stabilization delays to 500 uS. That should be
enough according to the datasheet and bootlets.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Robert Deliën <robert@delien.nl>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
Fabio Estevam [Fri, 16 Mar 2012 11:32:09 +0000 (11:32 +0000)]
pmic_i2c: Return error in case of invalid pmic_i2c_tx_num
Return error in case of invalid pmic_i2c_tx_num.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Lukasz Majewski <l.majewski@samsung.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Tue, 13 Mar 2012 07:26:49 +0000 (07:26 +0000)]
mx6: Remove duplicate definition of ANATOP_BASE_ADDR
Remove duplicate definition of ANATOP_BASE_ADDR.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Tue, 13 Mar 2012 07:26:48 +0000 (07:26 +0000)]
mx6: Fix reset cause for Power On Reset case
After booting mx6qsabrelite from POR the following is reported:
CPU: Freescale i.MX61 family rev1.0 at 792 MHz
Reset cause: unknown reset
This is because both the POR and WDOG bits are set after reset.
Fix this by also checking both bits in the POR case.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Eric Nelson [Sun, 4 Mar 2012 10:51:36 +0000 (10:51 +0000)]
i.MX6: mx6qsabrelite: add MACH_TYPE_MX6Q_SABRELITE
Allow non-dt kernels to boot
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Eric Nelson [Mon, 12 Mar 2012 15:04:12 +0000 (15:04 +0000)]
i.MX6: mx6q_sabrelite: add CONFIG_REVISION_TAG
This is needed to support Freescale-supplied userspaces.
At the moment, both the IPU and VPU libraries provided by Freescale
in the "imx-lib" package contain routines which scrape the system
revision from /proc/cpuinfo. In the VPU library, this information is
used to load the proper firmware, allowing a single binary to be used
across various i.MX processors.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Marek Vasut [Sun, 26 Feb 2012 12:15:04 +0000 (12:15 +0000)]
i.MX28: Enable additional DRAM address bits
Enables all fourteen address lines for DRAM
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Eric Nelson [Sun, 26 Feb 2012 12:03:15 +0000 (12:03 +0000)]
mx6q: mx6qsabrelite: setup_spi() should be called in board_init to allow use for environment
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Helmut Raiger [Wed, 15 Feb 2012 22:44:34 +0000 (22:44 +0000)]
mx31: add "ARM11P power gating" to get_reset_cause
Add missing reset reason 7 to get_reset_cause().
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Fabio Estevam [Thu, 9 Feb 2012 14:25:07 +0000 (14:25 +0000)]
mx31pdk: Fix CONFIG_SYS_MEMTEST_END
CONFIG_SYS_MEMTEST_END should be higher than CONFIG_SYS_MEMTEST_START.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Thu, 9 Feb 2012 14:25:11 +0000 (14:25 +0000)]
efikamx: Fix CONFIG_SYS_MEMTEST_END
CONFIG_SYS_MEMTEST_END should be higher than CONFIG_SYS_MEMTEST_START.
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Fabio Estevam [Thu, 9 Feb 2012 14:25:10 +0000 (14:25 +0000)]
mx53smd: Fix CONFIG_SYS_MEMTEST_END
CONFIG_SYS_MEMTEST_END should be higher than CONFIG_SYS_MEMTEST_START.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Thu, 9 Feb 2012 14:25:09 +0000 (14:25 +0000)]
mx53evk: Fix CONFIG_SYS_MEMTEST_END
CONFIG_SYS_MEMTEST_END should be higher than CONFIG_SYS_MEMTEST_START.
Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Thu, 9 Feb 2012 14:25:08 +0000 (14:25 +0000)]
mx51evk: Fix CONFIG_SYS_MEMTEST_END
CONFIG_SYS_MEMTEST_END should be higher than CONFIG_SYS_MEMTEST_START.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Eric Nelson [Fri, 2 Mar 2012 12:55:09 +0000 (12:55 +0000)]
i.MX6: mx6qsabrelite: add ext2 support
Current Ubuntu releases from Freescale contain a boot script in ext3 filesystem.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Dirk Behme [Wed, 22 Feb 2012 22:50:19 +0000 (22:50 +0000)]
imximage: Remove overwriting of flash_offset
The flash header supports different flash offsets for different
boot devices. E.g. parallel NOR or OneNAND use a different offset
than FLASH_OFFSET_STANDARD (== 0x400).
The flash offset is correctly read from the configuration in
parse_cfg_cmd(). But is then overwritten wrongly in set_imx_hdr_v1/2().
Fix this by removing this overwriting. Use the flash offset
correctly read from the configuration, instead.
If there is no flash_offset read from the configuration file, i.e.
the BOOT_FROM tag is missing, exit with an error message.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Jason Liu <liu.h.jason@gmail.com>
CC: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Marek Vasut [Tue, 6 Mar 2012 10:57:43 +0000 (11:57 +0100)]
IXP: Fix GPIO_INT_ACT_LOW_SET()
The GPIO_INT_ACT_LOW_SET was incorrectly handling interrupt lines higher than 7.
This is due to the fact that there are two registers for total of 16 lines.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Marek Vasut [Tue, 6 Mar 2012 00:10:00 +0000 (01:10 +0100)]
IXP: Fix NAND build warning on PDNB3 and SCPU
nand.c: In function ‘pdnb3_nand_read_buf’:
nand.c:107:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
nand.c: In function ‘pdnb3_nand_dev_ready’:
nand.c:124:18: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
Remove the 4-byte-at-time read mode altogether, the most is bogus and will
likely cause unaligned accesses.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Marek Vasut [Tue, 6 Mar 2012 00:02:14 +0000 (01:02 +0100)]
IXP: Move PDNB3 and SCPU from Makefile to boards.cfg
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Marek Vasut [Tue, 6 Mar 2012 00:00:52 +0000 (01:00 +0100)]
IXP: Squash warnings in IXP NPE
IxEthAcc.c: In function ‘ixEthAccInit’:
IxEthAcc.c:105:21: warning: comparison between ‘IxEthDBStatus’ and ‘enum <anonymous>’ [-Wenum-compare]
IxEthDBAPISupport.c: In function ‘ixEthDBPortAddressSet’:
IxEthDBAPISupport.c:633:18: warning: variable ‘ackPortAddressLock’ set but not used [-Wunused-but-set-variable]
IxQMgrDispatcher.c: In function ‘ixQMgrLLPShow’:
IxQMgrDispatcher.c:1194:18: warning: variable ‘q’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Marek Vasut [Mon, 5 Mar 2012 23:45:35 +0000 (00:45 +0100)]
IXP: Fix missing MACH_TYPE_{ACTUX?,PNB3,DVLHOST}
These symbols are no longer defined in Linux-ARM's mach-types files. Replace
these with CONFIG_MACH_TYPE instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Marek Vasut [Mon, 5 Mar 2012 23:00:12 +0000 (00:00 +0100)]
IXP: Make IXP buildable with arm-linux- toolchains
Add -EB flag to LD to switch endianness of the linker. This should make armeb
targets buildable again. Also, make use of U-Boot's internal libgcc instead of
toolchain's one, this works around the use of libraries from GCC, which might be
little endian.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Marek Vasut [Mon, 5 Mar 2012 23:44:22 +0000 (00:44 +0100)]
Examples: Properly append LDFLAGS to LD command
The LD command in examples/standalone/Makefile ignored platform specific
LDFLAGS setup. Pass these LDFLAGS to the command.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Cc: Michael Schwingen <rincewind@discworld.dascon.de>
Matt Porter [Tue, 31 Jan 2012 12:03:58 +0000 (12:03 +0000)]
SPL: Enable YMODEM support on BeagleBone and AM335x EVM
Cc: Chandan Nath <chandan.nath@ti.com>
Tested-by: Tom Rini <trini@ti.com>
Signed-off-by: Matt Porter <mporter@ti.com>
Matt Porter [Tue, 31 Jan 2012 12:03:57 +0000 (12:03 +0000)]
SPL: Add YMODEM over UART load support
Adds support for loading U-Boot from UART using YMODEM protocol.
If YMODEM support is enabled in SPL and the romcode indicates
that SPL loaded via UART then SPL will wait for start of a
YMODEM transfer via the console port.
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Mon, 20 Feb 2012 13:27:43 +0000 (13:27 +0000)]
SPL: Add README.omap3
This document describes the SPL process for OMAP3 (and related) boards
as well as a partial memory map and how to verify certain aspects
outside of running on the target.
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Tue, 14 Feb 2012 07:29:40 +0000 (07:29 +0000)]
README: document more SPL config options
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Tue, 14 Feb 2012 07:29:39 +0000 (07:29 +0000)]
spl.c: Use __noreturn decorator
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Mon, 20 Feb 2012 13:50:10 +0000 (13:50 +0000)]
config.mk: Check for -fstack-usage support
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Tue, 14 Feb 2012 07:29:37 +0000 (07:29 +0000)]
config.mk: Make cc-option create a file under include/generated
Testing for -fstack-usage requires the creation of an output file, which
isn't possible with /dev/null.
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Tue, 14 Feb 2012 07:29:36 +0000 (07:29 +0000)]
.gitignore: Add .su files
The '-fstack-usage' option to gcc will generate .su files, ignore them.
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Tom Rini <trini@ti.com>
Robert Delien [Sun, 26 Feb 2012 12:15:07 +0000 (12:15 +0000)]
Fix erroneous 32-bit access to hw_clkctrl_frac0 and hw_clkctrl_frac1 registers
This patch fixes erroneous 32-bit access to registers
hw_clkctrl_frac0 and hw_clkctrl_frac1.
Signed-off-by: Robert Delien <robert@delien.nl>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Robert Delien [Sun, 26 Feb 2012 12:15:06 +0000 (12:15 +0000)]
Introducing 8-bit wide register, mx28_register_8
This patch introduces an 8-bit register, mx28_register_8, in order to
prepare for fixing erroneous 32-bit wide access of registers
hw_clkctrl_frac0 and hw_clkctrl_frac1.
Signed-off-by: Robert Delien <robert@delien.nl>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Robert Delien [Sun, 26 Feb 2012 12:15:05 +0000 (12:15 +0000)]
Renamed mx28_register to mx28_register_32 to prepare for mx28_register_8
This patch renames mx28_register to mx28_register_32 in order to
prepare for the introduction of an 8-bit register, mx28_register_8.
Signed-off-by: Robert Delien <robert@delien.nl>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Marek Vasut [Sun, 26 Feb 2012 12:15:03 +0000 (12:15 +0000)]
i.MX28: Reformat the DRAM memory configuration data
Reformat the data so it's easier to navigate through them.
Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Sun, 26 Feb 2012 12:15:02 +0000 (12:15 +0000)]
M28: Support for the old M28 SoM v1.0
This prototype version SoM is unused and not available to public.
Support this only for internal debugging purposes.
Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Sun, 26 Feb 2012 12:15:01 +0000 (12:15 +0000)]
M28: Fix LCD PINMUX
The LCD pins configuration was wrong in U-Boot, configure pins properly.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Wolfgang Grandegger [Wed, 8 Feb 2012 22:33:26 +0000 (22:33 +0000)]
mx6qsabrelite: add and enable USB Host 1 support
Cc: Stefano Babic <sbabic@denx.de>
Cc: Jason Liu <jason.hui@linaro.org>
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Wolfgang Grandegger [Wed, 8 Feb 2012 22:33:25 +0000 (22:33 +0000)]
usb/ehci: Add USB support for the MX6Q
Currently, only USB Host 1 is supported.
Cc: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Dirk Behme [Sun, 12 Feb 2012 21:29:47 +0000 (21:29 +0000)]
mx6q: mx6qsabrelite: Update the README
The SD loader binary is now downloadable at
https://wiki.linaro.org/Boards/MX6QSabreLite
under a open-source 3-clause BSD license. Update the README
for this.
The discussion shows that it's hard to change the hardware
regarding the default SPI NOR boot of the SabreLite boards.
I.e. this will stay the default boot. Therefore remove the
'early version of' statement.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
CC: Stefano Babic <sbabic@denx.de>
CC: Jason Liu <liu.h.jason@gmail.com>
Robert Delien [Tue, 7 Feb 2012 04:08:56 +0000 (04:08 +0000)]
i.mx28: Replaced magic numbers for scratch register addresses with register definitions
This patch replaces the use of magice numbers for scratch register
addresses with earlier defined register definitions.
Signed-off-by: Robert Delien <robert@delien.nl>
Robert Delien [Tue, 7 Feb 2012 04:08:55 +0000 (04:08 +0000)]
i.mx28: Added register definitions for DIGCTL registers
This patch adds register definitions for the registers of the DIGCTL
IP-block.
Signed-off-by: Robert Delien <robert@delien.nl>
Marek Vasut [Mon, 27 Feb 2012 12:59:47 +0000 (13:59 +0100)]
PXA: Fix missing get_tbclk() breaking vpac boards
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
projects / kernel / u-boot.git / log