review.tizen.org Git - platform/kernel/linux-starfive.git/log

net/mlx5: Fix setting number of EQs of SFs

When setting number of completion EQs of the SF, consider number of
online CPUs.
Without this consideration, when number of online cpus are less than 8,
unnecessary 8 completion EQs are allocated.

Fixes: c36326d38d93 ("net/mlx5: Round-Robin EQs over IRQs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Fix length of irq_index in chars

The maximum irq_index can be 2047, This means irq_name should have 4
characters reserve for the irq_index. Hence, increase it to 4.

Fixes: 3af26495a247 ("net/mlx5: Enlarge interrupt field in CREATE_EQ")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Avoid generating event after PPS out in Real time mode

When in Real-time mode, HW clock is synced with the PTP daemon. Hence
driver should not re-calibrate the next pulse (via MTPPSE repetitive
events mechanism).

This patch arms repetitive events only in free-running mode.

Fixes: 432119de33d9 ("net/mlx5: Add cyc2time HW translation mode support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: Force round second at 1PPS out start time

Allow configuration of 1PPS start time only with time-stamp representing
a round second. Prior to this patch driver allowed setting of a
non-round-second which is not supported by the device. Avoid unexpected
behavior by restricting start-time configuration to a round-second.

Fixes: 4272f9b88db9 ("net/mlx5e: Change 1PPS out scheme")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5: E-Switch, Fix double allocation of acl flow counter

Flow counter is allocated in eswitch legacy acl setting functions
without checking if already allocated by previous setting. Add a check
to avoid such double allocation.

Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: ea651a86d468 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Improve MQPRIO resiliency

* Add netdev->tc_to_txq rollback in case of failure in
  mlx5e_update_netdev_queues().
* Fix broken transition between the two modes:
  MQPRIO DCB mode with tc==8, and MQPRIO channel mode.
* Disable MQPRIO channel mode if re-attaching with a different number
  of channels.
* Improve code sharing.

Fixes: ec60c4581bd9 ("net/mlx5e: Support MQPRIO channel mode")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: Keep the value for maximum number of channels in-sync

The value for maximum number of channels is first calculated based
on the netdev's profile and current function resources (specifically,
number of MSIX vectors, which depends among other things on the number
of online cores in the system).
This value is then used to calculate the netdev's number of rxqs/txqs.
Once created (by alloc_etherdev_mqs), the number of netdev's rxqs/txqs
is constant and we must not exceed it.

To achieve this, keep the maximum number of channels in sync upon any
netdevice re-attach.

Use mlx5e_get_max_num_channels() for calculating the number of netdev's
rxqs/txqs. After netdev is created, use mlx5e_calc_max_nch() (which
coinsiders core device resources, profile, and netdev) to init or
update priv->max_nch.

Before this patch, the value of priv->max_nch might get out of sync,
mistakenly allowing accesses to out-of-bounds objects, which would
crash the system.

Track the number of channels stats structures used in a separate
field, as they are persistent to suspend/resume operations. All the
collected stats of every channel index that ever existed should be
preserved. They are reset only when struct mlx5e_priv is,
in mlx5e_priv_cleanup(), which is part of the profile changing flow.

There is no point anymore in blocking a profile change due to max_nch
mismatch in mlx5e_netdev_change_profile(). Remove the limitation.

Fixes: a1f240f18017 ("net/mlx5e: Adjust to max number of channles when re-attaching")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

net/mlx5e: IPSEC RX, enable checksum complete

Currently in Rx data path IPsec crypto offloaded packets uses
csum_none flag, so checksum is handled by the stack, this naturally
have some performance/cpu utilization impact on such flows. As Nvidia
NIC starting from ConnectX6DX provides checksum complete value out of
the box also for such flows there is no sense in taking csum_none path,
furthermore the stack (xfrm) have the method to handle checksum complete
corrections for such flows i.e. IPsec trailer removal and consequently
checksum value adjustment.

Because of the above and in addition the ConnectX6DX is the first HW
which supports IPsec crypto offload then it is safe to report csum
complete for IPsec offloaded traffic.

Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

af_unix: fix races in sk_peer_pid and sk_peer_cred accesses

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix EEE init issue when paired with EEE capable PHYs

When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
and the PHY is advertising EEE by default, we need to enable EEE on the
xPCS side too, instead of having user to manually trigger the enabling
config via ethtool.

Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().

Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dev_addr_list: handle first address in __hw_addr_add_ex

struct dev_addr_list is used for device addresses, unicast addresses
and multicast addresses. The first of those needs special handling
of the main address - netdev->dev_addr points directly the data
of the entry and drivers write to it freely, so we can't maintain
it in the rbtree (for now, at least, to be fixed in net-next).

Current work around sprinkles special handling of the first
address on the list throughout the code but it missed the case
where address is being added. First address will not be visible
during subsequent adds.

Syzbot found a warning where unicast addresses are modified
without holding the rtnl lock, tl;dr is that team generates
the same modification multiple times, not necessarily when
right locks are held.

In the repro we have:

macvlan -> team -> veth

macvlan adds a unicast address to the team. Team then pushes
that address down to its memebers (veths). Next something unrelated
makes team sync member addrs again, and because of the bug
the addr entries get duplicated in the veths. macvlan gets
removed, removes its addr from team which removes only one
of the duplicated addresses from veths. This removal is done
under rtnl. Next syzbot uses iptables to add a multicast addr
to team (which does not hold rtnl lock). Team syncs veth addrs,
but because veths' unicast list still has the duplicate it will
also get sync, even though this update is intended for mc addresses.
Again, uc address updates need rtnl lock, boom.

Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com
Fixes: 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sched: flower: protect fl_walk() with rcu

Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.

KASAN trace:

[  352.773640] ==================================================================
[  352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower]
[  352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987

[  352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2
[  352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  352.781022] Call Trace:
[  352.781573]  dump_stack_lvl+0x46/0x5a
[  352.782332]  print_address_description.constprop.0+0x1f/0x140
[  352.783400]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.784292]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.785138]  kasan_report.cold+0x83/0xdf
[  352.785851]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.786587]  kasan_check_range+0x145/0x1a0
[  352.787337]  fl_walk+0x159/0x240 [cls_flower]
[  352.788163]  ? fl_put+0x10/0x10 [cls_flower]
[  352.789007]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.790102]  tcf_chain_dump+0x231/0x450
[  352.790878]  ? tcf_chain_tp_delete_empty+0x170/0x170
[  352.791833]  ? __might_sleep+0x2e/0xc0
[  352.792594]  ? tfilter_notify+0x170/0x170
[  352.793400]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.794477]  tc_dump_tfilter+0x385/0x4b0
[  352.795262]  ? tc_new_tfilter+0x1180/0x1180
[  352.796103]  ? __mod_node_page_state+0x1f/0xc0
[  352.796974]  ? __build_skb_around+0x10e/0x130
[  352.797826]  netlink_dump+0x2c0/0x560
[  352.798563]  ? netlink_getsockopt+0x430/0x430
[  352.799433]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.800542]  __netlink_dump_start+0x356/0x440
[  352.801397]  rtnetlink_rcv_msg+0x3ff/0x550
[  352.802190]  ? tc_new_tfilter+0x1180/0x1180
[  352.802872]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  352.803668]  ? tc_new_tfilter+0x1180/0x1180
[  352.804344]  ? _copy_from_iter_nocache+0x800/0x800
[  352.805202]  ? kasan_set_track+0x1c/0x30
[  352.805900]  netlink_rcv_skb+0xc6/0x1f0
[  352.806587]  ? rht_deferred_worker+0x6b0/0x6b0
[  352.807455]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  352.808324]  ? netlink_ack+0x4d0/0x4d0
[  352.809086]  ? netlink_deliver_tap+0x62/0x3d0
[  352.809951]  netlink_unicast+0x353/0x480
[  352.810744]  ? netlink_attachskb+0x430/0x430
[  352.811586]  ? __alloc_skb+0xd7/0x200
[  352.812349]  netlink_sendmsg+0x396/0x680
[  352.813132]  ? netlink_unicast+0x480/0x480
[  352.813952]  ? __import_iovec+0x192/0x210
[  352.814759]  ? netlink_unicast+0x480/0x480
[  352.815580]  sock_sendmsg+0x6c/0x80
[  352.816299]  ____sys_sendmsg+0x3a5/0x3c0
[  352.817096]  ? kernel_sendmsg+0x30/0x30
[  352.817873]  ? __ia32_sys_recvmmsg+0x150/0x150
[  352.818753]  ___sys_sendmsg+0xd8/0x140
[  352.819518]  ? sendmsg_copy_msghdr+0x110/0x110
[  352.820402]  ? ___sys_recvmsg+0xf4/0x1a0
[  352.821110]  ? __copy_msghdr_from_user+0x260/0x260
[  352.821934]  ? _raw_spin_lock+0x81/0xd0
[  352.822680]  ? __handle_mm_fault+0xef3/0x1b20
[  352.823549]  ? rb_insert_color+0x2a/0x270
[  352.824373]  ? copy_page_range+0x16b0/0x16b0
[  352.825209]  ? perf_event_update_userpage+0x2d0/0x2d0
[  352.826190]  ? __fget_light+0xd9/0xf0
[  352.826941]  __sys_sendmsg+0xb3/0x130
[  352.827613]  ? __sys_sendmsg_sock+0x20/0x20
[  352.828377]  ? do_user_addr_fault+0x2c5/0x8a0
[  352.829184]  ? fpregs_assert_state_consistent+0x52/0x60
[  352.830001]  ? exit_to_user_mode_prepare+0x32/0x160
[  352.830845]  do_syscall_64+0x35/0x80
[  352.831445]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  352.832331] RIP: 0033:0x7f7bee973c17
[  352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17
[  352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003
[  352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40
[  352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f
[  352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088

[  352.843784] Allocated by task 2960:
[  352.844451]  kasan_save_stack+0x1b/0x40
[  352.845173]  __kasan_kmalloc+0x7c/0x90
[  352.845873]  fl_change+0x282/0x22db [cls_flower]
[  352.846696]  tc_new_tfilter+0x6cf/0x1180
[  352.847493]  rtnetlink_rcv_msg+0x471/0x550
[  352.848323]  netlink_rcv_skb+0xc6/0x1f0
[  352.849097]  netlink_unicast+0x353/0x480
[  352.849886]  netlink_sendmsg+0x396/0x680
[  352.850678]  sock_sendmsg+0x6c/0x80
[  352.851398]  ____sys_sendmsg+0x3a5/0x3c0
[  352.852202]  ___sys_sendmsg+0xd8/0x140
[  352.852967]  __sys_sendmsg+0xb3/0x130
[  352.853718]  do_syscall_64+0x35/0x80
[  352.854457]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  352.855830] Freed by task 7:
[  352.856421]  kasan_save_stack+0x1b/0x40
[  352.857139]  kasan_set_track+0x1c/0x30
[  352.857854]  kasan_set_free_info+0x20/0x30
[  352.858609]  __kasan_slab_free+0xed/0x130
[  352.859348]  kfree+0xa7/0x3c0
[  352.859951]  process_one_work+0x44d/0x780
[  352.860685]  worker_thread+0x2e2/0x7e0
[  352.861390]  kthread+0x1f4/0x220
[  352.862022]  ret_from_fork+0x1f/0x30

[  352.862955] Last potentially related work creation:
[  352.863758]  kasan_save_stack+0x1b/0x40
[  352.864378]  kasan_record_aux_stack+0xab/0xc0
[  352.865028]  insert_work+0x30/0x160
[  352.865617]  __queue_work+0x351/0x670
[  352.866261]  rcu_work_rcufn+0x30/0x40
[  352.866917]  rcu_core+0x3b2/0xdb0
[  352.867561]  __do_softirq+0xf6/0x386

[  352.868708] Second to last potentially related work creation:
[  352.869779]  kasan_save_stack+0x1b/0x40
[  352.870560]  kasan_record_aux_stack+0xab/0xc0
[  352.871426]  call_rcu+0x5f/0x5c0
[  352.872108]  queue_rcu_work+0x44/0x50
[  352.872855]  __fl_put+0x17c/0x240 [cls_flower]
[  352.873733]  fl_delete+0xc7/0x100 [cls_flower]
[  352.874607]  tc_del_tfilter+0x510/0xb30
[  352.886085]  rtnetlink_rcv_msg+0x471/0x550
[  352.886875]  netlink_rcv_skb+0xc6/0x1f0
[  352.887636]  netlink_unicast+0x353/0x480
[  352.888285]  netlink_sendmsg+0x396/0x680
[  352.888942]  sock_sendmsg+0x6c/0x80
[  352.889583]  ____sys_sendmsg+0x3a5/0x3c0
[  352.890311]  ___sys_sendmsg+0xd8/0x140
[  352.891019]  __sys_sendmsg+0xb3/0x130
[  352.891716]  do_syscall_64+0x35/0x80
[  352.892395]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  352.893666] The buggy address belongs to the object at ffff8881c8251000
                which belongs to the cache kmalloc-2k of size 2048
[  352.895696] The buggy address is located 1152 bytes inside of
                2048-byte region [ffff8881c8251000, ffff8881c8251800)
[  352.897640] The buggy address belongs to the page:
[  352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250
[  352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0
[  352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[  352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00
[  352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[  352.905861] page dumped because: kasan: bad access detected

[  352.907323] Memory state around the buggy address:
[  352.908218]  ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.909471]  ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.912012]                    ^
[  352.912642]  ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.913919]  ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.915185] ==================================================================

Fixes: d39d714969cd ("idr: introduce idr_for_each_entry_continue_ul()")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: introduce and use lock_sock_fast_nested()

Syzkaller reported a false positive deadlock involving
the nl socket lock and the subflow socket lock:

MPTCP: kernel_bind error, err=-98
============================================
WARNING: possible recursive locking detected
5.15.0-rc1-syzkaller #0 Not tainted
--------------------------------------------
syz-executor998/6520 is trying to acquire lock:
ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738

but task is already holding lock:
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720

other info that might help us debug this:
Possible unsafe locking scenario:

       CPU0
       ----
  lock(k-sk_lock-AF_INET);
  lock(k-sk_lock-AF_INET);

*** DEADLOCK ***

May be due to missing lock nesting notation

3 locks held by syz-executor998/6520:
#0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802
#1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline]
#1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790
#2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
#2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720

stack backtrace:
CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2944 [inline]
check_deadlock kernel/locking/lockdep.c:2987 [inline]
validate_chain kernel/locking/lockdep.c:3776 [inline]
__lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015
lock_acquire kernel/locking/lockdep.c:5625 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
lock_sock_fast+0x36/0x100 net/core/sock.c:3229
mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738
inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
__sock_release net/socket.c:649 [inline]
sock_release+0x87/0x1b0 net/socket.c:677
mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900
mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
sock_no_sendpage+0x101/0x150 net/core/sock.c:2980
kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504
kernel_sendpage net/socket.c:3501 [inline]
sock_sendpage+0xe5/0x140 net/socket.c:1003
pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
direct_splice_actor+0x110/0x180 fs/splice.c:936
splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891
do_splice_direct+0x1b3/0x280 fs/splice.c:979
do_sendfile+0xae9/0x1240 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1314 [inline]
__se_sys_sendfile64 fs/read_write.c:1300 [inline]
__x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f215cb69969
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08
R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

the problem originates from uncorrect lock annotation in the mptcp
code and is only visible since commit 2dcb96bacce3 ("net: core: Correct
the sock::sk_lock.owned lockdep annotations"), but is present since
the port-based endpoint support initial implementation.

This patch addresses the issue introducing a nested variant of
lock_sock_fast() and using it in the relevant code path.

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: bcm7xxx: Fixed indirect MMD operations

When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.

Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.

Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hns3-fixes'

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: disable firmware compatible features when uninstall PF

Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.

In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".

To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.

Fixes: ed8fb4b262ae ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix always enable rx vlan filter problem after selftest

Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.

However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.

Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: PF enable promisc for VF when mac table is overflow

If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.

Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.

Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix show wrong state when add existing uc mac address

Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.

To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.

Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE

HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.

Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.

Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: don't rollback when destroy mqprio fail

For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.

As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.

Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: remove tc enable checking

Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.

Fix it by removing the tc enable checking, ensure the queue
count is not zero.

With this change, the tc_en is useless now, so remove it.

Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: do not allow call hns3_nic_net_open repeatedly

hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.

The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G           O      5.14.0-rc4+ #1
[ 3078.269102] Hardware name:  , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w  3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]

[ 3078.314771] sp : ffff8000108abb20
[ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300
[ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000
[ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880
[ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000
[ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930
[ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4
[ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8
[ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344
[ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938
[ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0
[ 3078.414657] Call trace:
[ 3078.418517]  napi_enable+0x80/0x84
[ 3078.424626]  hns3_reset_notify_up_enet+0x78/0xd0 [hns3]
[ 3078.433469]  hns3_reset_notify+0x64/0x80 [hns3]
[ 3078.441430]  hclge_notify_client+0x68/0xb0 [hclge]
[ 3078.450511]  hclge_reset_rebuild+0x524/0x884 [hclge]
[ 3078.458879]  hclge_reset_service_task+0x3c4/0x680 [hclge]
[ 3078.467470]  hclge_service_task+0xb0/0xb54 [hclge]
[ 3078.475675]  process_one_work+0x1dc/0x48c
[ 3078.481888]  worker_thread+0x15c/0x464
[ 3078.487104]  kthread+0x160/0x170
[ 3078.492479]  ret_from_fork+0x10/0x18
[ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000)
[ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]---

Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set.

Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup

The ixgbe driver currently generates a NULL pointer dereference with
some machine (online cpus < 63). This is due to the fact that the
maximum value of num_xdp_queues is nr_cpu_ids. Code is in
"ixgbe_set_rss_queues"".

Here's how the problem repeats itself:
Some machine (online cpus < 63), And user set num_queues to 63 through
ethtool. Code is in the "ixgbe_set_channels",
adapter->ring_feature[RING_F_FDIR].limit = count;

It becomes 63.

When user use xdp, "ixgbe_set_rss_queues" will set queues num.
adapter->num_rx_queues = rss_i;
adapter->num_tx_queues = rss_i;
adapter->num_xdp_queues = ixgbe_xdp_queues(adapter);

And rss_i's value is from
f = &adapter->ring_feature[RING_F_FDIR];
rss_i = f->indices = f->limit;

So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup",
for (i = 0; i < adapter->num_rx_queues; i++)
if (adapter->xdp_ring[i]->xsk_umem)

It leads to panic.

Call trace:
[exception RIP: ixgbe_xdp+368]
RIP: ffffffffc02a76a0  RSP: ffff9fe16202f8d0  RFLAGS: 00010297
RAX: 0000000000000000  RBX: 0000000000000020  RCX: 0000000000000000
RDX: 0000000000000000  RSI: 000000000000001c  RDI: ffffffffa94ead90
RBP: ffff92f8f24c0c18   R8: 0000000000000000   R9: 0000000000000000
R10: ffff9fe16202f830  R11: 0000000000000000  R12: ffff92f8f24c0000
R13: ffff9fe16202fc01  R14: 000000000000000a  R15: ffffffffc02a7530
ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc
8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808
9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235
10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384
11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd
12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb
13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88
14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319
15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290
16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8
17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64
18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9
19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c

So I fix ixgbe_max_channels so that it will not allow a setting of queues
to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup,
take the smaller value of num_rx_queues and num_xdp_queues.

Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: mcast: Associate the seqcount with its protecting lock.

The sequence count bridge_mcast_querier::seq is protected by
net_bridge::multicast_lock but seqcount_init() does not associate the
seqcount with the lock. This leads to a warning on PREEMPT_RT because
preemption is still enabled.

Let seqcount_init() associate the seqcount with lock that protects the
write section. Remove lockdep_assert_held_once() because lockdep already checks
whether the associated lock is held.

Fixes: 67b746f94ff39 ("net: bridge: mcast: make sure querier port/address updates are consistent")
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Mike Galbraith <efault@gmx.de>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20210928141049.593833-1-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: mdio-ipq4019: Fix the error for an optional regs resource

The second resource is optional which is only provided on the chipset
IPQ5018. But the blamed commit ignores that and if the resource is
not there it just fails.

the resource is used like this,
if (priv->eth_ldo_rdy) {
val = readl(priv->eth_ldo_rdy);
val |= BIT(0);
writel(val, priv->eth_ldo_rdy);
fsleep(IPQ_PHY_SET_DELAY_US);
}

This patch reverts that to still allow the second resource to be optional
because other SoC have the some MDIO controller and doesn't need to
second resource.

Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()")
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210928134849.2092-1-caihuoqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2021-09-28

The following pull-request contains BPF updates for your *net* tree.

We've added 10 non-merge commits during the last 14 day(s) which contain
a total of 11 files changed, 139 insertions(+), 53 deletions(-).

The main changes are:

1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk.

2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh.

3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann.

4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi.

5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer.

6) Fix return value handling for struct_ops BPF programs, from Hou Tao.

7) Various fixes to BPF selftests, from Jiri Benc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
,

net: hns3: fix hclge_dbg_dump_tm_pg() stack usage

This function copies strings around between multiple buffers
including a large on-stack array that causes a build warning
on 32-bit systems:

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg':
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=]

The function can probably be cleaned up a lot, to go back to
printing directly into the output buffer, but dynamically allocating
the structure is a simpler workaround for now.

Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mdio: mscc-miim: Fix the mdio controller

According to the documentation the second resource is optional. But the
blamed commit ignores that and if the resource is not there it just
fails.

This patch reverts that to still allow the second resource to be
optional because other SoC have the some MDIO controller and doesn't
need to second resource.

Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: Return errno instead of NULL in unix_create1().

unix_create1() returns NULL on error, and the callers assume that it never
fails for reasons other than out of memory.  So, the callers always return
-ENOMEM when unix_create1() fails.

However, it also returns NULL when the number of af_unix sockets exceeds
twice the limit controlled by sysctl: fs.file-max.  In this case, the
callers should return -ENFILE like alloc_empty_file().

This patch changes unix_create1() to return the correct error value instead
of NULL on error.

Out of curiosity, the assumption has been wrong since 1999 due to this
change introduced in 2.2.4 [0].

  diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c
  --- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999
  +++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999
  @@ -388,6 +413,9 @@
   {
    struct sock *sk;

  + if (atomic_read(&unix_nr_socks) >= 2*max_files)
  + return NULL;
  +
    MOD_INC_USE_COUNT;
    sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1);
    if (!sk) {

[0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: udp: annotate data race around udp_sk(sk)->corkflag

up->corkflag field can be read or written without any lock.
Annotate accesses to avoid possible syzbot/KCSAN reports.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sun: SUNVNET_COMMON should depend on INET

When CONFIG_INET is not set, there are failing references to IPv4
functions, so make this driver depend on INET.

Fixes these build errors:

sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common':
sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send'
sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common':
sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aaron Young <aaron.young@oracle.com>
Cc: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ionic: fix gathering of debug stats

Don't print stats for which we haven't reserved space as it can
cause nasty memory bashing and related bad behaviors.

Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '1GbE' of git://git./linux/kernel/git/t
nguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-09-27

This series contains updates to e100 driver only.

Jake corrects under allocation of register buffer due to incorrect
calculations and fixes buffer overrun of register dump.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

dmascc: add CONFIG_VIRT_TO_BUS dependency

Many architectures don't define virt_to_bus() any more, as drivers
should be using the dma-mapping interfaces where possible:

In file included from drivers/net/hamradio/dmascc.c:27:
drivers/net/hamradio/dmascc.c: In function 'tx_on':
drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration]
  976 |                              virt_to_bus(priv->tx_buf[priv->tx_tail]) + n);
      |                              ^~~~~~~~~~~
arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr'
  109 |         __set_dma_addr(chan, (void *)__bus_to_virt(addr))
      |                                                    ^~~~

Add the Kconfig dependency to prevent this from being built on
architectures without virt_to_bus().

Fixes: bc1abb9e55ce ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: fix link error

An object file cannot be built for both loadable module and built-in
use at the same time:

arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common':
ks8851_common.c:(.text+0xf80): undefined reference to `__this_module'

Change the ks8851_common code to be a standalone module instead,
and use Makefile logic to ensure this is built-in if at least one
of its two users is.

Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
Link: https://lore.kernel.org/netdev/20210125121937.3900988-1-arnd@kernel.org/
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf, x86: Fix bpf mapping of atomic fetch implementation

Fix the case where the dst register maps to %rax as otherwise this produces
an incorrect mapping with the implementation in 981f94c3e921 ("bpf: Add
bitwise atomic instructions") as %rax is clobbered given it's part of the
cmpxchg as operand.

The issue is similar to b29dd96b905f ("bpf, x86: Fix BPF_FETCH atomic and/or/
xor with r0 as src") just that the case of dst register was missed.

Before, dst=r0 (%rax) src=r2 (%rsi):

  [...]
  c5:   mov    %rax,%r10
  c8:   mov    0x0(%rax),%rax       <---+ (broken)
  cc:   mov    %rax,%r11                |
  cf:   and    %rsi,%r11                |
  d2:   lock cmpxchg %r11,0x0(%rax) <---+
  d8:   jne    0x00000000000000c8       |
  da:   mov    %rax,%rsi                |
  dd:   mov    %r10,%rax                |
  [...]                                 |
                                        |
After, dst=r0 (%rax) src=r2 (%rsi):     |
                                        |
  [...]                                 |
  da: mov    %rax,%r10                |
  dd: mov    0x0(%r10),%rax       <---+ (fixed)
  e1: mov    %rax,%r11                |
  e4: and    %rsi,%r11                |
  e7: lock cmpxchg %r11,0x0(%r10) <---+
  ed: jne    0x00000000000000dd
  ef: mov    %rax,%rsi
  f2: mov    %r10,%rax
  [...]

The remaining combinations were fine as-is though:

After, dst=r9 (%r15) src=r0 (%rax):

  [...]
  dc: mov    %rax,%r10
  df: mov    0x0(%r15),%rax
  e3: mov    %rax,%r11
  e6: and    %r10,%r11
  e9: lock cmpxchg %r11,0x0(%r15)
  ef: jne    0x00000000000000df      _
  f1: mov    %rax,%r10                | (unneeded, but
  f4: mov    %r10,%rax               _|  not a problem)
  [...]

After, dst=r9 (%r15) src=r4 (%rcx):

  [...]
  de: mov    %rax,%r10
  e1: mov    0x0(%r15),%rax
  e5: mov    %rax,%r11
  e8: and    %rcx,%r11
  eb: lock cmpxchg %r11,0x0(%r15)
  f1: jne    0x00000000000000e1
  f3: mov    %rax,%rcx
  f6: mov    %r10,%rax
  [...]

The case of dst == src register is rejected by the verifier and
therefore not supported, but x86 JIT also handles this case just
fine.

After, dst=r0 (%rax) src=r0 (%rax):

  [...]
  eb: mov    %rax,%r10
  ee: mov    0x0(%r10),%rax
  f2: mov    %rax,%r11
  f5: and    %r10,%r11
  f8: lock cmpxchg %r11,0x0(%r10)
  fe: jne    0x00000000000000ee
100: mov    %rax,%r10
103: mov    %r10,%rax
  [...]

Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions")
Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>

selftests, bpf: test_lwt_ip_encap: Really disable rp_filter

It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.

Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com

selftests, bpf: Fix makefile dependencies on libbpf

When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:

  In file included from progs/bpf_flow.c:19:
  [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
  #include "bpf_helper_defs.h"
           ^~~~~~~~~~~~~~~~~~~

The file that fails the build varies between runs but it's always in the
progs/ subdir.

The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba07e but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.

Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.

Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com

bpf, test, cgroup: Use sk_{alloc,free} for test cases

BPF test infra has some hacks in place which kzalloc() a socket and perform
minimum init via sock_net_set() and sock_init_data(). As a result, the sk's
skcd->cgroup is NULL since it didn't go through proper initialization as it
would have been the case from sk_alloc(). Rather than re-adding a NULL test
in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test
socket. The latter also allows to get rid of the bpf_sk_storage_free() special
case.

Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: b7a1848e8398 ("bpf: add BPF_PROG_TEST_RUN support for flow dissector")
Fixes: 2cb494a36c98 ("bpf: add tests for direct packet access from CGROUP_SKB")
Reported-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com
Reported-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+664b58e9a40fbb2cec71@syzkaller.appspotmail.com
Tested-by: syzbot+33f36d0754d4c5c0e102@syzkaller.appspotmail.com
Link: https://lore.kernel.org/bpf/20210927123921.21535-2-daniel@iogearbox.net

bpf, cgroup: Assign cgroup in cgroup_sk_alloc when called from interrupt

If cgroup_sk_alloc() is called from interrupt context, then just assign the
root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups:
Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later
on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and
iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather
than re-adding the NULL-test to the fast-path we can just assign it once from
cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from
NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp
directly does /not/ change behavior for callers of sock_cgroup_ptr().

syzkaller was able to trigger a splat in the legacy netrom code base, where
the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc()
and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL
skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects
a non-NULL object. There are a few other candidates aside from netrom which
have similar pattern where in their accept-like implementation, they just call
to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the
corresponding cgroup_sk_clone() which then inherits the cgroup from the parent
socket. None of them are related to core protocols where BPF cgroup programs
are running from. However, in future, they should follow to implement a similar
inheritance mechanism.

Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID
configuration, the same issue was exposed also prior to 8520e224f547 due to
commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated
cgroup") which added the early in_interrupt() return back then.

Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode")
Fixes: e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup")
Reported-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com
Reported-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot+df709157a4ecaf192b03@syzkaller.appspotmail.com
Tested-by: syzbot+533f389d4026d86a2a95@syzkaller.appspotmail.com
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net

libbpf: Fix segfault in static linker for objects without BTF

When a BPF object is compiled without BTF info (without -g),
trying to link such objects using bpftool causes a SIGSEGV due to
btf__get_nr_types accessing obj->btf which is NULL. Fix this by
checking for the NULL pointer, and return error.

Reproducer:
$ cat a.bpf.c
extern int foo(void);
int bar(void) { return foo(); }
$ cat b.bpf.c
int foo(void) { return 0; }
$ clang -O2 -target bpf -c a.bpf.c
$ clang -O2 -target bpf -c b.bpf.c
$ bpftool gen obj out a.bpf.o b.bpf.o
Segmentation fault (core dumped)

After fix:
$ bpftool gen obj out a.bpf.o b.bpf.o
libbpf: failed to find BTF info for object 'a.bpf.o'
Error: failed to link 'a.bpf.o': Unknown error -22 (-22)

Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924023725.70228-1-memxor@gmail.com

MAINTAINERS: Add btf headers to BPF

BPF folks maintain these and they're not picked up by the current
MAINTAINERS entries.

Files caught by the added globs:

  include/linux/btf.h
  include/linux/btf_ids.h
  include/uapi/linux/btf.h

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210924193557.3081469-1-davemarchevsky@fb.com

bpf: Exempt CAP_BPF from checks against bpf_jit_limit

When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat
programs with CAP_BPF as privileged for the purpose of JIT memory allocation.
This means that a program without CAP_BPF can block a program with CAP_BPF
from loading a program.

Fix this by checking bpf_capable() in bpf_jit_charge_modmem().

Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922111153.19843-1-lmb@cloudflare.com

e100: fix buffer overrun in e100_get_regs

The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.

The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).

The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.

The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.

The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.

It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!

In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).

Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.

Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.

Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

e100: fix length calculation in e100_get_regs_len

commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.

This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.

Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.

Fixes: abf9b902059f ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

net: phy: enhance GPY115 loopback disable function

GPY115 need reset PHY when it comes out from loopback mode if the firmware
version number (lower 8 bits) is equal to or below 0x76.

Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Xu Liang <lxu@maxlinear.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-09-27' of git://git./linux/kernel/git/jberg/mac80211

Johannes berg says:

====================
Some fixes:
* potential use-after-free in CCMP/GCMP RX processing
* potential use-after-free in TX A-MSDU processing
* revert to low data rates for no-ack as the commit
broke other things
* limit VHT MCS/NSS in radiotap injection
* drop frames with invalid addresses in IBSS mode
* check rhashtable_init() return value in mesh
* fix potentially unaligned access in mesh
* fix late beacon hrtimer handling in hwsim (syzbot)
* fix documentation for PTK0 rekeying
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mv88e6xxx-mtu-fixes'

Andrew Lunn says:

====================
mv88e6xxx: MTU fixes

These three patches fix MTU issues reported by 曹煜.

There are two different ways of configuring the MTU in the hardware.
The 6161 family is using the wrong method. Some of the marvell switch
enforce the MTU when the port is used for CPU/DSA, some don't.
Because of the extra header, the MTU needs increasing with this
overhead.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

dsa: mv88e6xxx: Include tagger overhead when setting MTU for DSA and CPU ports

Same members of the Marvell Ethernet switches impose MTU restrictions
on ports used for connecting to the CPU or another switch for DSA. If
the MTU is set too low, tagged frames will be discarded. Ensure the
worst case tagger overhead is included in setting the MTU for DSA and
CPU ports.

Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Reported by: 曹煜 <cao88yu@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

dsa: mv88e6xxx: Fix MTU definition

The MTU passed to the DSA driver is the payload size, typically 1500.
However, the switch uses the frame size when applying restrictions.
Adjust the MTU with the size of the Ethernet header and the frame
checksum. The VLAN header also needs to be included when the frame
size it per port, but not when it is global.

Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Reported by: 曹煜 <cao88yu@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

dsa: mv88e6xxx: 6161: Use chip wide MAX MTU

The datasheets suggests the 6161 uses a per port setting for jumbo
frames. Testing has however shown this is not correct, it uses the old
style chip wide MTU control. Change the ops in the 6161 structure to
reflect this.

Fixes: 1baf0fac10fb ("net: dsa: mv88e6xxx: Use chip-wide max frame size for MTU")
Reported by: 曹煜 <cao88yu@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mdiobus: Fix memory leak in __mdiobus_register

Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it will cause memory
leak.

BUG: memory leak
unreferenced object 0xffff888114032e00 (size 256):
  comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff  ................
    08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff  .........ve.....
  backtrace:
    [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline]
    [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253
    [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969
    [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487
    [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359
    [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170
    [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238

BUG: memory leak
unreferenced object 0xffff888116f06900 (size 32):
  comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s)
  hex dump (first 32 bytes):
    75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00  usb-001:003.....
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60
    [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83
    [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48
    [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289
    [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147
    [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535
    [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87
    [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline]
    [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786
    [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745
    [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396
    [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline]
    [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596
    [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline]
    [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751
    [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781
    [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898
    [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427
    [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969

Reported-by: syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "ibmvnic: check failover_pending in login response"

This reverts commit d437f5aa23aa2b7bd07cd44b839d7546cc17166f.

Code has been duplicated through commit <273c29e944bd> "ibmvnic: check
failover_pending in login response"

Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bgmac-platform: handle mac-address deferral

This patch is a replication of Christian Lamparter's "net: bgmac-bcma:
handle deferred probe error due to mac-address" patch for the
bgmac-platform driver [1].

As is the case with the bgmac-bcma driver, this change is to cover the
scenario where the MAC address cannot yet be discovered due to reliance
on an nvmem provider which is yet to be instantiated, resulting in a
random address being assigned that has to be manually overridden.

[1] https://lore.kernel.org/netdev/20210919115725.29064-1-chunkeey@gmail.com

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns: Fix spelling mistake "maped" -> "mapped"

There is a spelling mistake in a dev_err error message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211: Fix Ptk0 rekey documentation

@IEEE80211_KEY_FLAG_GENERATE_IV setting is irrelevant for RX.
Move the requirement to the correct section in the PTK0 rekey
documentation.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20210924200514.7936-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: check return value of rhashtable_init

When rhashtable_init() fails, it returns -EINVAL.
However, since error return value of rhashtable_init is not checked,
it can cause use of uninitialized pointers.
So, fix unhandled errors of rhashtable_init.

Signed-off-by: MichelleJin <shjy180909@gmail.com>
Link: https://lore.kernel.org/r/20210927033457.1020967-4-shjy180909@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: fix use-after-free in CCMP/GCMP RX

When PN checking is done in mac80211, for fragmentation we need
to copy the PN to the RX struct so we can later use it to do a
comparison, since commit bf30ca922a0c ("mac80211: check defrag
PN against current frame").

Unfortunately, in that commit I used the 'hdr' variable without
it being necessarily valid, so use-after-free could occur if it
was necessary to reallocate (parts of) the frame.

Fix this by reloading the variable after the code that results
in the reallocations, if any.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401.

Cc: stable@vger.kernel.org
Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame")
Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net: prevent user from passing illegal stab size

We observed below report when playing with netlink sock:

  UBSAN: shift-out-of-bounds in net/sched/sch_api.c:580:10
  shift exponent 249 is too large for 32-bit type
  CPU: 0 PID: 685 Comm: a.out Not tainted
  Call Trace:
   dump_stack_lvl+0x8d/0xcf
   ubsan_epilogue+0xa/0x4e
   __ubsan_handle_shift_out_of_bounds+0x161/0x182
   __qdisc_calculate_pkt_len+0xf0/0x190
   __dev_queue_xmit+0x2ed/0x15b0

it seems like kernel won't check the stab log value passing from
user, and will use the insane value later to calculate pkt_len.

This patch just add a check on the size/cell_log to avoid insane
calculation.

Reported-by: Abaci <abaci@linux.alibaba.com>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

1) ipset limits the max allocatable memory via kvmalloc() to MAX_INT,
   from Jozsef Kadlecsik.

2) Check ip_vs_conn_tab_bits value to be in the range specified
   in Kconfig, from Andrea Claudi.

3) Initialize fragment offset in ip6tables, from Jeremy Sowden.

4) Make conntrack hash chain length random, from Florian Westphal.

5) Add zone ID to conntrack and NAT hashtuple again, also from Florian.

6) Add selftests for bidirectional zone support and colliding tuples,
   from Florian Westphal.

7) Unlink table before synchronize_rcu when cleaning tables with
   owner, from Florian.

8) ipset limits the max allocatable memory via kvmalloc() to MAX_INT.

9) Release conntrack entries via workqueue in masquerade, from Florian.

10) Fix bogus net_init in iptables raw table definition, also from Florian.

11) Work around missing softdep in log extensions, from Florian Westphal.

12) Serialize hash resizes and cleanups with mutex, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: conntrack: serialize hash resizes and cleanups
  netfilter: log: work around missing softdep backend module
  netfilter: iptable_raw: drop bogus net_init annotation
  netfilter: nf_nat_masquerade: defer conntrack walk to work queue
  netfilter: nf_nat_masquerade: make async masq_inet6_event handling generic
  netfilter: nf_tables: Fix oversized kvmalloc() calls
  netfilter: nf_tables: unlink table before deleting it
  selftests: netfilter: add zone stress test with colliding tuples
  selftests: netfilter: add selftest for directional zone support
  netfilter: nat: include zone id in nat table hash again
  netfilter: conntrack: include zone id in tuple hash again
  netfilter: conntrack: make max chain length random
  netfilter: ip6_tables: zero-initialize fragment offset
  ipvs: check that ip_vs_conn_tab_bits is between 8 and 20
  netfilter: ipset: Fix oversized kvmalloc() calls
====================

Link: https://lore.kernel.org/r/20210924221113.348767-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers: net: mhi: fix error path in mhi_net_newlink

Fix double free_netdev when mhi_prepare_for_transfer fails.

Fixes: 3ffec6a14f24 ("net: Add mhi-net driver")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

smsc95xx: fix stalled rx after link change

After commit 05b35e7eb9a1 ("smsc95xx: add phylib support"), link changes
are no longer propagated to usbnet. As a result, rx URB allocation won't
happen until there is a packet sent out first (this might never happen,
e.g. running just ssh server with a static IP). Fix by triggering usbnet
EVENT_LINK_CHANGE.

Fixes: 05b35e7eb9a1 ("smsc95xx: add phylib support")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: Fix rtnexthop len when RTA_FLOW is present

Multipath RTA_FLOW is embedded in nexthop. Dump it in fib_add_nexthop()
to get the length of rtnexthop correct.

Fixes: b0f60193632e ("ipv4: Refactor nexthop attributes in fib_dump_info")
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: enetc: fix the incorrect clearing of IF_MODE bits

The enetc phylink .mac_config handler intends to clear the IFMODE field
(bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the
other fields instead.

For normal operation, the bug was inconsequential, due to the fact that
we write the PM0_IF_MODE register in two stages, first in
phylink .mac_config (which incorrectly cleared out a bunch of stuff),
then we update the speed and duplex to the correct values in
phylink .mac_link_up.

Judging by the code (not tested), it looks like maybe loopback mode was
broken, since this is one of the settings in PM0_IF_MODE which is
incorrectly cleared.

Fixes: c76a97218dcb ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode")
Reported-by: Pavel Machek (CIP) <pavel@denx.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-fixes'

Mat Martineau says:

====================
mptcp: Bug fixes

This patch set includes two separate fixes for the net tree:

Patch 1 makes sure that MPTCP token searches are always limited to the
appropriate net namespace.

Patch 2 allows userspace to always change the backup settings for
configured endpoints even if those endpoints are not currently in use.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: allow changing the 'backup' bit when no sockets are open

current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e.
using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that
matches the endpoint address. There is no reason for that, so we can just
ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints
can reconfigure their 'backup' flag even if no MPTCP sockets are open (or
more generally, in case the MP_PRIO message is not sent out).

Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: don't return sockets in foreign netns

mptcp_token_get_sock() may return a mptcp socket that is in
a different net namespace than the socket that received the token value.

The mptcp syncookie code path had an explicit check for this,
this moves the test into mptcp_token_get_sock() function.

Eventually token.c should be converted to pernet storage, but
such change is not suitable for net tree.

Fixes: 2c5ebd001d4f0 ("mptcp: refactor token container")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb

We should always check if skb_header_pointer's return is NULL before
using it, otherwise it may cause null-ptr-deref, as syzbot reported:

  KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
  RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline]
  RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196
  Call Trace:
  <IRQ>
   sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109
   ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422
   ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463
   NF_HOOK include/linux/netfilter.h:307 [inline]
   NF_HOOK include/linux/netfilter.h:301 [inline]
   ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472
   dst_input include/net/dst.h:460 [inline]
   ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
   NF_HOOK include/linux/netfilter.h:307 [inline]
   NF_HOOK include/linux/netfilter.h:301 [inline]
   ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297

Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize")
Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'net-5.15-rc3' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Current release - regressions:

   - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports()

  Previous releases - regressions:

   - introduce a shutdown method to mdio device drivers, and make DSA
     switch drivers compatible with masters disappearing on shutdown;
     preventing infinite reference wait

   - fix issues in mdiobus users related to ->shutdown vs ->remove

   - virtio-net: fix pages leaking when building skb in big mode

   - xen-netback: correct success/error reporting for the
     SKB-with-fraglist

   - dsa: tear down devlink port regions when tearing down the devlink
     port on error

   - nexthop: fix division by zero while replacing a resilient group

   - hns3: check queue, vf, vlan ids range before using

  Previous releases - always broken:

   - napi: fix race against netpoll causing NAPI getting stuck

   - mlx4_en: ensure link operstate is updated even if link comes up
     before netdev registration

   - bnxt_en: fix TX timeout when TX ring size is set to the smallest

   - enetc: fix illegal access when reading affinity_hint; prevent oops
     on sysfs access

   - mtk_eth_soc: avoid creating duplicate offload entries

  Misc:

   - core: correct the sock::sk_lock.owned lockdep annotations"

* tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
  atlantic: Fix issue in the pm resume flow.
  net/mlx4_en: Don't allow aRFS for encapsulated packets
  net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled
  net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries
  nfc: st-nci: Add SPI ID matching DT compatible
  MAINTAINERS: remove Guvenc Gulce as net/smc maintainer
  nexthop: Fix memory leaks in nexthop notification chain listeners
  mptcp: ensure tx skbs always have the MPTCP ext
  qed: rdma - don't wait for resources under hw error recovery flow
  s390/qeth: fix deadlock during failing recovery
  s390/qeth: Fix deadlock in remove_discipline
  s390/qeth: fix NULL deref in qeth_clear_working_pool_list()
  net: dsa: realtek: register the MDIO bus under devres
  net: dsa: don't allocate the slave_mii_bus using devres
  Doc: networking: Fox a typo in ice.rst
  net: dsa: fix dsa_tree_setup error path
  net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work
  net/smc: add missing error check in smc_clc_prfx_set()
  net: hns3: fix a return value error in hclge_get_reset_status()
  net: hns3: check vlan id before using it
  ...

memcg: flush lruvec stats in the refault

Prior to the commit 7e1c0d6f5820 ("memcg: switch lruvec stats to rstat")
and the commit aa48e47e3906 ("memcg: infrastructure to flush memcg
stats"), each lruvec memcg stats can be off by (nr_cgroups * nr_cpus *
32) at worst and for unbounded amount of time.  The commit aa48e47e3906
moved the lruvec stats to rstat infrastructure and the commit
7e1c0d6f5820 bounded the error for all the lruvec stats to (nr_cpus *
32) at worst for at most 2 seconds.  More specifically it decoupled the
number of stats and the number of cgroups from the error rate.

However this reduction in error comes with the cost of triggering the
slowpath of stats update more frequently.  Previously in the slowpath
the kernel adds the stats up the memcg tree.  After aa48e47e3906, the
kernel triggers the asyn lruvec stats flush through queue_work().  This
causes regression reports from 0day kernel bot [1] as well as from
phoronix test suite [2].

We tried two options to fix the regression:

1) Increase the threshold to trigger the slowpath in lruvec stats
    update codepath from 32 to 512.

2) Remove the slowpath from lruvec stats update codepath and instead
    flush the stats in the page refault codepath. The assumption is that
    the kernel timely flush the stats, so, the update tree would be
    small in the refault codepath to not cause the preformance impact.

Following are the results of will-it-scale/page_fault[1|2|3] benchmark
on four settings i.e.  (1) 5.15-rc1 as baseline (2) 5.15-rc1 with
aa48e47e3906 and 7e1c0d6f5820 reverted (3) 5.15-rc1 with option-1
(4) 5.15-rc1 with option-2.

  test       (1)      (2)               (3)               (4)
  pg_f1   368563   406277 (10.23%)   399693  (8.44%)   416398 (12.97%)
  pg_f2   338399   372133  (9.96%)   369180  (9.09%)   381024 (12.59%)
  pg_f3   500853   575399 (14.88%)   570388 (13.88%)   576083 (15.02%)

From the above result, it seems like the option-2 not only solves the
regression but also improves the performance for at least these
benchmarks.

Feng Tang (intel) ran the aim7 benchmark with these two options and
confirms that option-1 reduces the regression but option-2 removes the
regression.

Michael Larabel (phoronix) ran multiple benchmarks with these options
and reported the results at [3] and it shows for most benchmarks
option-2 removes the regression introduced by the commit aa48e47e3906
("memcg: infrastructure to flush memcg stats").

Based on the experiment results, this patch proposed the option-2 as the
solution to resolve the regression.

Link: https://lore.kernel.org/all/20210726022421.GB21872@xsang-OptiPlex-9020
Link: https://www.phoronix.com/scan.php?page=article&item=linux515-compile-regress
Link: https://openbenchmarking.org/result/2109226-DEBU-LINUX5104
Fixes: aa48e47e3906 ("memcg: infrastructure to flush memcg stats")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hillf Danton <hdanton@sina.com>,
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atlantic: Fix issue in the pm resume flow.

After fixing hibernation resume flow, another usecase was found which
should be explicitly handled - resume when device is in "down" state.
Invoke aq_nic_init jointly with aq_nic_start only if ndev was already
up during suspend/hibernate. We still need to perform nic_deinit() if
caller requests for it, to handle the freeze/resume scenarios.

Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx4_en: Don't allow aRFS for encapsulated packets

Driver doesn't support aRFS for encapsulated packets, return early error
in such a case.

Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled

The blamed commit made the fatally incorrect assumption that ports which
aren't in the FORWARDING STP state should not have packets forwarded
towards them, and that is all that needs to be done.

However, that logic alone permits BLOCKING ports to forward to
FORWARDING ports, which of course allows packet storms to occur when
there is an L2 loop.

The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge
do for you", but "what can you do for the bridge". This way, only
FORWARDING ports forward to the other FORWARDING ports from the same
bridging domain, and we are still compatible with the idea of multiple
bridges.

Fixes: df291e54ccca ("net: ocelot: support multiple bridges")
Suggested-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries

Sometimes multiple CLS_REPLACE calls are issued for the same connection.
rhashtable_insert_fast does not check for these duplicates, so multiple
hardware flow entries can be created.
Fix this by checking for an existing entry early

Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: st-nci: Add SPI ID matching DT compatible

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding the part name used in
the compatible to the list of SPI IDs.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: remove Guvenc Gulce as net/smc maintainer

Remove myself as net/smc maintainer, as I am
leaving IBM soon and can not maintain net/smc anymore.

Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nexthop: Fix memory leaks in nexthop notification chain listeners

syzkaller discovered memory leaks [1] that can be reduced to the
following commands:

# ip nexthop add id 1 blackhole
# devlink dev reload pci/0000:06:00.0

As part of the reload flow, mlxsw will unregister its netdevs and then
unregister from the nexthop notification chain. Before unregistering
from the notification chain, mlxsw will receive delete notifications for
nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw
will not receive notifications for nexthops using netdevs that are not
dismantled as part of the reload flow. For example, the blackhole
nexthop above that internally uses the loopback netdev as its nexthop
device.

One way to fix this problem is to have listeners flush their nexthop
tables after unregistering from the notification chain. This is
error-prone as evident by this patch and also not symmetric with the
registration path where a listener receives a dump of all the existing
nexthops.

Therefore, fix this problem by replaying delete notifications for the
listener being unregistered. This is symmetric to the registration path
and also consistent with the netdev notification chain.

The above means that unregister_nexthop_notifier(), like
register_nexthop_notifier(), will have to take RTNL in order to iterate
over the existing nexthops and that any callers of the function cannot
hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN
driver. To avoid a deadlock, change the latter to unregister its nexthop
listener without holding RTNL, making it symmetric to the registration
path.

[1]
unreferenced object 0xffff88806173d600 (size 512):
  comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s)
  hex dump (first 32 bytes):
    41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff  A..`......sa....
    08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00  ..sa............
  backtrace:
    [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
    [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522
    [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline]
    [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline]
    [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231
    [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline]
    [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline]
    [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239
    [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83
    [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline]
    [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306
    [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244
    [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline]
    [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline]
    [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913
    [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572
    [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504
    [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590
    [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
    [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340
    [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929
    [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline]
    [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline]
    [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409
    [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463
    [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492
    [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline]
    [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline]
    [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499

Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac80211-hwsim: fix late beacon hrtimer handling

Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx
that our handling of the hrtimer here is wrong: If the timer fires
late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot)
then it tries to actually rearm the timer at the next deadline,
which might be in the past already:

1          2          3          N          N+1
|          |          |   ...    |          |

^ intended to fire here (1)
            ^ next deadline here (2)
                                      ^ actually fired here

The next time it fires, it's later, but will still try to schedule
for the next deadline (now 3), etc. until it catches up with N,
but that might take a long time, causing stalls etc.

Now, all of this is simulation, so we just have to fix it, but
note that the behaviour is wrong even per spec, since there's no
value then in sending all those beacons unaligned - they should be
aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a
bit (or a lot) late, then just resume at that point.

Therefore, change the code to use hrtimer_forward_now() which will
ensure that the next firing of the timer would be at N+1 (in the
picture), i.e. the next interval point after the current time.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+0e964fad69a9c462bc1e@syzkaller.appspotmail.com
Fixes: 01e59e467ecf ("mac80211_hwsim: hrtimer beacon")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210915112936.544f383472eb.I3f9712009027aa09244b65399bf18bf482a8c4f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: mesh: fix potentially unaligned access

The pointer here points directly into the frame, so the
access is potentially unaligned. Use get_unaligned_le16
to avoid that.

Fixes: 3f52b7e328c5 ("mac80211: mesh power save basics")
Link: https://lore.kernel.org/r/20210920154009.3110ff75be0c.Ib6a2ff9e9cc9bc6fca50fce631ec1ce725cc926b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap

Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap
routine in order to fix the following warning reported by syzbot:

WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
Modules linked in:
CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216
RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000
RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003
RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100
R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8
R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004
FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740
netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089
__dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165
__bpf_tx_skb net/core/filter.c:2114 [inline]
__bpf_redirect_no_mac net/core/filter.c:2139 [inline]
__bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162
____bpf_clone_redirect net/core/filter.c:2429 [inline]
bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401
bpf_prog_eeb6f53a69e5c6a2+0x59/0x234
bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline]
__bpf_prog_run include/linux/filter.h:624 [inline]
bpf_prog_run include/linux/filter.h:631 [inline]
bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119
bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663
bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline]
__sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605
__do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9

Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com
Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Drop frames from invalid MAC address in ad-hoc mode

WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554
sta_info_insert_rcu+0x121/0x12a0
Modules linked in:
CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253
Workqueue: phy3 ieee80211_iface_work
RIP: 0010:sta_info_insert_rcu+0x121/0x12a0
...
Call Trace:
ieee80211_ibss_finish_sta+0xbc/0x170
ieee80211_ibss_work+0x13f/0x7d0
ieee80211_iface_work+0x37a/0x500
process_one_work+0x357/0x850
worker_thread+0x41/0x4d0

If an Ad-Hoc node receives packets with invalid source MAC address,
it hits a WARN_ON in sta_info_insert_check(), this can spam the log.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

mac80211: Fix ieee80211_amsdu_aggregate frag_tail bug

In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the
end of skb_shinfo(head)->frag_list, and use it to bind other skb in
the end of this function. But when execute ieee80211_amsdu_aggregate()
->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of
skb_shinfo(head)->frag_list will be changed. However, the
ieee80211_amsdu_aggregate() not update frag_tail after call
pskb_expand_head(). That will cause the second skb can't bind to the
head skb appropriately.So we update the address of frag_tail to fix it.

Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210830073240.12736-1-pkshih@realtek.com
[reword comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Revert "mac80211: do not use low data rates for data frames with no ack flag"

This reverts commit d333322361e7 ("mac80211: do not use low data rates for
data frames with no ack flag").

Returning false early in rate_control_send_low breaks sending broadcast
packets, since rate control will not select a rate for it.

Before re-introducing a fixed version of this patch, we should probably also
make some changes to rate control to be more conservative in selecting rates
for no-ack packets and also prevent using probing rates on them, since we won't
get any feedback.

Fixes: d333322361e7 ("mac80211: do not use low data rates for data frames with no ack flag")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210906083559.9109-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

init: Revert accidental changes to print irqs_disabled()

Commit f8ade8dddb16 ("xsurf100: drop include of lib8390.c") accidentally
changed init/main.c. Revert that part.

Fixes: f8ade8dddb16 ("xsurf100: drop include of lib8390.c")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Update Xen-[PCI,SWIOTLB,Block] maintainership

Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Juergen, Roger, and Stefano.

Thank you!

Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Update SWIOTLB maintainership

Konrad's new job role is putting a serious cramp on him
being a responsive maintainer and as such he is handing off
the reins to Christoph Hellwig.

Thank you!

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: update entry for NIOS2

Ley Foon has left Intel and will no longer be able to maintain NIOS2.
Update the MAINTAINER's entry to Dinh Nguyen.

Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'spi-fix-v5.15-rc1' of git://git./linux/kernel/git/broonie/spi

Pull spi modalias fix from Mark Brown:
"Fix modalias issues

  As reported by Russell King the change to use OF style modaliases for
  DT enumerated broke at least the spi-nor driver, the patch here
  reverts that change to fix the regression.

  Sadly this will mean that anything that started loading since the
  change to OF modaliases will run into issues, there doesn't seem to be
  any approach which doesn't cause some problems and thi seems like the
  least bad approach - gory details are in the commit log for the
  change.

  I'm currently working through the SPI drivers to add ID tables and
  missing IDs to tables which should address things from the other end,
  this seems more straightforward and robust than any other options"

* tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Revert modalias changes

Merge tag 'nfsd-5.15-2' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:
"Critical bug fixes:

   - Fix crash in NLM TEST procedure

   - NFSv4.1+ backchannel not restored after PATH_DOWN"

* tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN
  NLM: Fix svcxdr_encode_owner()

Merge tag 'platform-drivers-x86-v5.15-2' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
"The first round of bug-fixes for platform-drivers-x86 for 5.15,
  highlights:

   - amd-pmc fix for some suspend/resume issues

   - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting

   - some build error/warning fixes

   - various DMI quirk additions"

* tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX
  platform/x86/intel: hid: Add DMI switches allow list
  platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error
  platform/x86: amd-pmc: Increase the response register timeout
  platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet
  platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet
  lg-laptop: Correctly handle dmi_get_system_info() returning NULL
  platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()

MAINTAINERS: ARM/VT8500, remove defunct e-mail

linux@prisktech.co.nz is defunct:

4.1.2 <linux@prisktech.co.nz>: Recipient address rejected: Domain not found

Remove it from MAINTAINERS and mark the ARM/VT8500 entry orphan.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mptcp: ensure tx skbs always have the MPTCP ext

Due to signed/unsigned comparison, the expression:

info->size_goal - skb->len > 0

evaluates to true when the size goal is smaller than the
skb size. That results in lack of tx cache refill, so that
the skb allocated by the core TCP code lacks the required
MPTCP skb extensions.

Due to the above, syzbot is able to trigger the following WARN_ON():

WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Modules linked in:
CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366
Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9
RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216
RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000
RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003
RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280
R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0
FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547
mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003
release_sock+0xb4/0x1b0 net/core/sock.c:3206
sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145
mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749
inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
sock_write_iter+0x2a0/0x3e0 net/socket.c:1057
call_write_iter include/linux/fs.h:2163 [inline]
new_sync_write+0x40b/0x640 fs/read_write.c:507
vfs_write+0x7cf/0xae0 fs/read_write.c:594
ksys_write+0x1ee/0x250 fs/read_write.c:647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9
RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038
R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000

Fix the issue rewriting the relevant expression to avoid
sign-related problems - note: size_goal is always >= 0.

Additionally, ensure that the skb in the tx cache always carries
the relevant extension.

Reported-and-tested-by: syzbot+263a248eec3e875baa7b@syzkaller.appspotmail.com
Fixes: 1094c6fe7280 ("mptcp: fix possible divide by zero")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: rdma - don't wait for resources under hw error recovery flow

If the HW device is during recovery, the HW resources will never return,
hence we shouldn't wait for the CID (HW context ID) bitmaps to clear.
This fix speeds up the error recovery flow.

Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery")
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 's390-qeth-fixes-2021-09-21'

Julian Wiedmann says:

====================
s390/qeth: fixes 2021-09-21

This brings two fixes for deadlocks when a device is removed while it
has certain types of async work pending. And one additional fix for a
missing NULL check in an error case.
====================

Link: https://lore.kernel.org/r/20210921145217.1584654-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: fix deadlock during failing recovery

Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed
taking discipline_mutex inside qeth_do_reset(), fixing potential
deadlocks. An error path was missed though, that still takes
discipline_mutex and thus has the original deadlock potential.

Intermittent deadlocks were seen when a qeth channel path is configured
offline, causing a race between qeth_do_reset and ccwgroup_remove.
Call qeth_set_offline() directly in the qeth_do_reset() error case and
then a new variant of ccwgroup_set_offline(), without taking
discipline_mutex.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: Fix deadlock in remove_discipline

Problem: qeth_close_dev_handler is a worker that tries to acquire
card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline().
Since commit b41b554c1ee7
("s390/qeth: fix locking for discipline setup / removal")
qeth_remove_discipline() is called under card->discipline_mutex and
cancels the work and waits for it to finish.

STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the
only situation that schedules close_dev_work. In that situation scheduling
qeth recovery will also result in an offline interface, when resetting the
isolation mode fails, if the external switch is still set to VEB.
And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery")
qeth recovery does not aquire card->discipline_mutex anymore.

So we accept the longer pathlength of qeth_schedule_recovery in this
error situation and re-use the existing function.

As a side-benefit this changes the hwtrap to behave like during recovery
instead of like during a user-triggered set_offline.

Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

s390/qeth: fix NULL deref in qeth_clear_working_pool_list()

When qeth_set_online() calls qeth_clear_working_pool_list() to roll
back after an error exit from qeth_hardsetup_card(), we are at risk of
accessing card->qdio.in_q before it was allocated by
qeth_alloc_qdio_queues() via qeth_mpc_initialize().

qeth_clear_working_pool_list() then dereferences NULL, and by writing to
queue->bufs[i].pool_entry scribbles all over the CPU's lowcore.
Resulting in a crash when those lowcore areas are used next (eg. on
the next machine-check interrupt).

Such a scenario would typically happen when the device is first set
online and its queues aren't allocated yet. An early IO error or certain
misconfigs (eg. mismatched transport mode, bad portno) then cause us to
error out from qeth_hardsetup_card() with card->qdio.in_q still being
NULL.

Fix it by checking the pointer for NULL before accessing it.

Note that we also have (rare) paths inside qeth_mpc_initialize() where
a configuration change can cause us to free the existing queues,
expecting that subsequent code will allocate them again. If we then
error out before that re-allocation happens, the same bug occurs.

Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer")
Reported-by: Stefan Raspl <raspl@linux.ibm.com>
Root-caused-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

spi: Revert modalias changes

During the v5.13 cycle we updated the SPI subsystem to generate OF style
modaliases for SPI devices, replacing the old Linux style modalises we
used to generate based on spi_device_id which are the DT style name with
the vendor removed.  Unfortunately this means that we start only
reporting OF style modalises and not the old ones and there is nothing
that ensures that drivers list every possible OF compatible string in
their OF ID table.  The result is that there are systems which have been
relying on loading modules based on the old style that are now broken,
as found by Russell King with spi-nor on Macchiatobin.

spi-nor is a particularly problematic case for this, it only lists a
single generic DT compatible jedec,spi-nor in the driver but supports a
huge raft of device specific compatibles, with a large set of part
numbers many of which are offered by multiple vendors.  Russell's
searches of upstream device trees has turned up examples with vendor
names written in non-standard ways too.  To make matters worse up until
8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec"
binding") the generic compatible was not part of the binding so there
are device trees out there written to that binding version which don't
list it all.  The sheer number of parts supported together with our
previous approach of ignoring the vendor ID makes robustly fixing this
by adding compatibles to the spi-nor driver seem problematic, the
current DT binding document does not list all the parts supported by the
driver at the minute (further patches will fix this).

I've also investigated supporting both formats of modalias
simultaneously but that doesn't seem possible, especially without
breaking our userspace ABI which is obviously not viable.

Instead revert the relevant changes for now:

e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
3ce6c9e2617e ("spi: add of_device_uevent_modalias support")

This will unfortunately mean that any system which had started having
modules autoload based on the OF compatibles for drivers that list
things there but not in the spi_device_ids will now not have those
modules load which is itself a regression.  Since it affects a narrower
time window and the particularly problematic spi-nor driver may be
critical to system boot on smaller systems this seems the best of a
series of bad options.  I will start an audit of SPI drivers to identify
and fix cases where things won't autoload using spi_device_id, this is
not great but seems to be the best way forward that anyone has been able
to identify.

Thanks to Russell for both his report and the additional diagnostic and
analysis work he has done here, the detailed research above was his
work.

Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support")
Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support")
Reported-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Andreas Schwab <schwab@suse.de>
Cc: Marco Felsch <m.felsch@pengutronix.de>

Merge tag 's390-5.15-ebpf-jit-fixes' of git://git./linux/kernel/git/s390/linux

Pull s390 eBPF fixes from Vasily Gorbik:
"Johan Almbladh has implemented a number of new testcases for eBPF [1],
  which uncovered three miscompilation issues in the s390 eBPF JIT"

Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/
* tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/bpf: Fix optimizing out zero-extensions
  s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
  s390/bpf: Fix branch shortening during codegen pass