Richard Henderson [Tue, 18 Oct 2011 00:32:26 +0000 (17:32 -0700)]
target-sparc: Implement PDIST.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 17 Oct 2011 18:25:56 +0000 (11:25 -0700)]
target-sparc: Do exceptions management fully inside the helpers.
This reduces the size of the individual translation blocks, since
we only emit a single call for each FOP rather than three. In
addition, clear_float_exceptions expands inline to a single byte store.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Mon, 17 Oct 2011 17:42:49 +0000 (10:42 -0700)]
target-sparc: Change fpr representation to doubles.
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 15 Oct 2011 19:12:02 +0000 (12:12 -0700)]
target-sparc: Undo cpu_fpr rename.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 15 Oct 2011 19:00:08 +0000 (12:00 -0700)]
target-sparc: Extract float128 move to a function.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 15 Oct 2011 18:52:00 +0000 (11:52 -0700)]
target-sparc: Extract common code for floating-point operations.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Wed, 19 Oct 2011 21:56:43 +0000 (14:56 -0700)]
target-sparc: Make FPU/VIS helpers const when possible.
This also removes the unused ENV parameter from these helpers.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Sat, 15 Oct 2011 17:20:20 +0000 (10:20 -0700)]
target-sparc: Pass float64 parameters instead of dt0/1 temporaries.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 14 Oct 2011 22:47:35 +0000 (15:47 -0700)]
target-sparc: Add accessors for double-precision fpr access.
Begin using i64 quantities to manipulate double-precision values.
On a 64-bit host this will, for the moment, generate less efficient
code; on a 32-bit host code quality should be largely unchanged.
Code quality for 64-bit will be adjusted with a subsequent patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 14 Oct 2011 22:03:25 +0000 (15:03 -0700)]
target-sparc: Mark fprs dirty in store accessor.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Richard Henderson [Fri, 14 Oct 2011 21:58:32 +0000 (14:58 -0700)]
target-sparc: Add accessors for single-precision fpr access.
Load, store, and "create destination". This version attempts to
change the behaviour of the translator as little as possible. We
previously used cpu_tmp32 as the temporary destination, and we
continue to use that. This will eventually allow a change in
representation of the fprs.
Change the name of the cpu_fpr array to make certain that all
instances are converted.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Blue Swirl [Mon, 1 Aug 2011 10:15:51 +0000 (10:15 +0000)]
Sparc: split load and store op helpers
Move load and store op helpers top ldst_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 15:53:35 +0000 (15:53 +0000)]
Sparc: convert win_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 15:05:41 +0000 (15:05 +0000)]
Sparc: convert interrupt helpers to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 14:51:24 +0000 (14:51 +0000)]
Sparc: convert mmu_helper to trace framework
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 11:30:01 +0000 (11:30 +0000)]
Sparc: split MMU helpers
Move MMU helpers to mmu_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 12:03:08 +0000 (12:03 +0000)]
Sparc: fix coding style in helper.c
Before the next patch, fix coding style of the areas affected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 4 Jul 2011 18:15:42 +0000 (18:15 +0000)]
Sparc: avoid AREG0 for division op helpers
Make [su]div{,cc} helpers take a parameter for CPUState instead
of relying on global env. Move the functions to helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 1 Aug 2011 09:20:58 +0000 (09:20 +0000)]
Sparc: avoid AREG0 for softint op helpers and Leon cache control
Make softint op helpers and Leon cache irq manager take a parameter
for CPUState instead of relying on global env. Move the functions
to int{32,64}_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 3 Jul 2011 21:01:59 +0000 (21:01 +0000)]
Sparc: avoid AREG0 for CWP and PSTATE helpers
Make CWP and PSTATE helpers take a parameter for CPUState instead
of relying on global env. Remove wrapper functions.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Wed, 26 Oct 2011 15:29:24 +0000 (10:29 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
Stefan Weil [Tue, 25 Oct 2011 20:23:17 +0000 (22:23 +0200)]
main-loop: Add missing include file
stdint.h defines the POSIX data types and is needed
for MinGW-w64 (and maybe other hosts).
v2: Instead of adding stdint.h directly, qemu-common.h is now
included and duplicate include statements were removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Tue, 25 Oct 2011 05:16:25 +0000 (07:16 +0200)]
target-sparc: Fix use of g_new0 / g_free
g_malloc0 needs g_free instead of free.
While fixing this, I also replaced g_malloc0 by g_new0
as was suggested by Stuart Brady.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Stefan Weil [Mon, 24 Oct 2011 20:29:48 +0000 (22:29 +0200)]
target-sparc: Fix order of function parameters
The MinGW-w64 gcc complains about wrong parameters for
gen_helper_fpadd16_s and three other functions.
gen_helper_fpadd16_s is declared like this (hidden in lots of macros):
static inline void
gen_helper_fpadd16s(TCGv_i32 retval, TCGv_ptr arg1,
TCGv_i32 arg2, TCGv_i32 arg3);
So it looks like cpu_env should be the 2nd parameter.
Please review this patch as I have no environment to test it
(maybe the 1st parameter should be cpu_dst?).
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Marc-André Lureau [Tue, 25 Oct 2011 14:53:01 +0000 (16:53 +0200)]
hda: do not mix output and input stream states, RHBZ #740493
Windows 7 may use the same stream number for input and output.
Current code will confuse streams.
Changes since v1:
- keep running_compat[] for migration version 1
- add running_real[] for migration version 2
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Marc-André Lureau [Tue, 25 Oct 2011 14:53:00 +0000 (16:53 +0200)]
hda: do not mix output and input streams, RHBZ #740493
Windows 7 may use the same stream number for input and output.
That will result in lot of garbage on playback.
The hardcoded value of 4 needs to be in sync with GCAP streams
description and IN/OUT registers.
Signed-off-by: Marc-Andr? Lureau <marcandre.lureau@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Anthony Liguori [Mon, 24 Oct 2011 15:51:12 +0000 (10:51 -0500)]
Merge remote-tracking branch 'bonzini/split-main-loop-for-anthony' into staging
Fabien Chouteau [Thu, 6 Oct 2011 14:37:51 +0000 (16:37 +0200)]
Add stdio char device on windows
Simple implementation of an stdio char device on Windows.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 1 Aug 2011 09:03:20 +0000 (09:03 +0000)]
Sparc: split CWP and PSTATE op helpers
Move CWP and PSTATE op helpers to win_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 3 Jul 2011 16:01:57 +0000 (16:01 +0000)]
Sparc: avoid AREG0 for lazy condition code helpers
Make lazy condition code helpers take a parameter for CPUState instead
of relying on global env.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 1 Aug 2011 08:37:36 +0000 (08:37 +0000)]
Sparc: split lazy condition code handling op helpers
Move lazy condition code handling op helpers to cc_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 3 Jul 2011 10:42:23 +0000 (10:42 +0000)]
Sparc: avoid AREG0 for float and VIS ops
Make floating point and VIS ops take a parameter for CPUState instead
of relying on global env.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Mon, 1 Aug 2011 07:37:45 +0000 (07:37 +0000)]
Sparc: split FPU and VIS op helpers
Move FPU op helpers to fop_helper.c. Move VIS op helpers to vis_helper.c,
compile it only for Sparc64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 3 Jul 2011 15:22:03 +0000 (15:22 +0000)]
Sparc: fix coding style
Before the next patches, fix coding style of the areas affected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 3 Jul 2011 08:19:42 +0000 (08:19 +0000)]
Sparc: avoid AREG0 for raise_exception and helper_debug
Make raise_exception() and helper_debug() take a parameter for
CPUState instead of relying on global env. Move the functions
to helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 3 Jul 2011 07:05:50 +0000 (07:05 +0000)]
Sparc: move trivial functions from op_helper.c
These functions don't need access to CPUState or already pass it,
so relocating them from op_helper.c to helper.c and int64_helper.c
is trivial.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 09:33:40 +0000 (09:33 +0000)]
Sparc: split helper.c
Move CPU init to cpu_init.c and interrupt handling to int32_helper.c
for Sparc32 and int64_helper.c for Sparc64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 11 Sep 2011 09:42:13 +0000 (09:42 +0000)]
Sparc: fix coding style
Before the next patch, fix coding style of the areas affected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 15 Oct 2011 08:05:18 +0000 (08:05 +0000)]
m48t59: fix write access
Fix incorrect order of arguments, letting writes to NVRAM succeed.
It looks like guests never write to the device, only read from it, since the bug
originates back to
819385c58b319d9f80d676cefaed0610118f03ac.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 15 Oct 2011 07:57:49 +0000 (07:57 +0000)]
m48t59: drop obsolete address base arithmetic
Remove now incorrect address base arithmetic, missed by
9936d6e42392f1440505dfa9df065eabd251cadf. Fixes Sparc64 boot.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 16 Oct 2011 14:43:00 +0000 (14:43 +0000)]
pci_bridge: fix typo
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paolo Bonzini [Mon, 12 Sep 2011 12:03:13 +0000 (14:03 +0200)]
simplify main loop functions
Provide a clean example of how to use the main loop in the tools.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 12:59:42 +0000 (14:59 +0200)]
Revert to a hand-made select loop
This reverts commit
c82dc29a9112f34e0a51cad9a412cf6d9d05dfb2
and
4d88a2ac8643265108ef1fb47ceee5d7b28e19f2.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 13 Sep 2011 08:30:52 +0000 (10:30 +0200)]
main-loop: create main-loop.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 14:44:30 +0000 (16:44 +0200)]
main-loop: create main-loop.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 27 Sep 2011 16:23:14 +0000 (18:23 +0200)]
qemu-timer: do not use RunState change handlers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 14:21:44 +0000 (16:21 +0200)]
qemu-timer: move more stuff out of qemu-timer.c
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 19 Sep 2011 08:18:51 +0000 (10:18 +0200)]
qemu-timer: use atexit for quit_timers
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 12:40:36 +0000 (14:40 +0200)]
qemu-timer: do not refer to runstate_is_running()
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 11:57:37 +0000 (13:57 +0200)]
qemu-timer: move icount to cpus.c
None of this is needed by tools, and most of it can even be made static
inside cpus.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 13:50:16 +0000 (15:50 +0200)]
qemu-timer: more clock functions
These will be used when moving icount accounting to cpus.c.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 14 Mar 2011 08:45:38 +0000 (09:45 +0100)]
qemu-timer: move common code to qemu_rearm_alarm_timer
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 13 Sep 2011 09:42:26 +0000 (11:42 +0200)]
qemu-timer: remove active_timers array
Embed the list in the QEMUClock instead.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 12 Sep 2011 13:17:57 +0000 (15:17 +0200)]
remove unused function
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Thu, 13 Oct 2011 17:45:37 +0000 (18:45 +0100)]
compatfd.c: Don't pass NULL pointer to SYS_signalfd
Don't pass a NULL pointer in to SYS_signalfd in qemu_signalfd_available():
this isn't valid and Valgrind complains about it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Peter Maydell [Thu, 29 Sep 2011 14:48:12 +0000 (15:48 +0100)]
linux-user: Fix broken "-version" option
Fix the "-version" option, which was accidentally broken in commit
fc9c541:
* exit after printing version information rather than proceeding
blithely onward (and likely printing the full usage message)
* correct the cut-n-paste error in the usage message for it
* don't insist on the presence of a following argument for
options which don't take an argument (this was preventing
'qemu-arm -version' from working)
* remove a spurious argc check from the beginning of main() which
meant 'QEMU_VERSION=1 qemu-arm' didn't work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:25 +0000 (13:16 +0200)]
block: change discard to co_discard
Since coroutine operation is now mandatory, convert both bdrv_discard
implementations to coroutines. For qcow2, this means taking the lock
around the operation. raw-posix remains synchronous.
The bdrv_discard callback is then unused and can be eliminated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:24 +0000 (13:16 +0200)]
block: change flush to co_flush
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:23 +0000 (13:16 +0200)]
block: take lock around bdrv_write implementations
This does the first part of the conversion to coroutines, by
wrapping bdrv_write implementations to take the mutex.
Drivers that implement bdrv_write rather than bdrv_co_writev can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:22 +0000 (13:16 +0200)]
block: take lock around bdrv_read implementations
This does the first part of the conversion to coroutines, by
wrapping bdrv_read implementations to take the mutex.
Drivers that implement bdrv_read rather than bdrv_co_readv can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
raw-win32 does not need the lock, because it cannot yield.
nbd also doesn't probably, but better be safe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:21 +0000 (13:16 +0200)]
block: add a CoMutex to synchronous read drivers
The big conversion of bdrv_read/write to coroutines caused the two
homonymous callbacks in BlockDriver to become reentrant. It goes
like this:
1) bdrv_read is now called in a coroutine, and calls bdrv_read or
bdrv_pread.
2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry;
3) in the common case when the protocol is file, bdrv_co_do_readv calls
bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields
until the AIO operation is complete;
4) if bdrv_read had been called from a bottom half, the main loop
is free to iterate again: a device model or another bottom half
can then come and call bdrv_read again.
This applies to all four of read/write/flush/discard. It would also
apply to is_allocated, but it is not used from within coroutines:
besides qemu-img.c and qemu-io.c, which operate synchronously, the
only user is the monitor. Copy-on-read will introduce a use in the
block layer, and will require converting it.
The solution is "simply" to convert all drivers to coroutines! We
just need to add a CoMutex that is taken around affected operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:20 +0000 (13:16 +0200)]
vmdk: clean up open
Move vmdk_parent_open to vmdk_open. There's another path how
vmdk_parent_open can be reached:
vmdk_parse_extents() -> vmdk_open_sparse() -> vmdk_open_vmdk4() ->
vmdk_open_desc_file().
If that can happen, however, the code is bogus. vmdk_parent_open
reads from bs->file:
if (bdrv_pread(bs->file, s->desc_offset, desc, DESC_SIZE) != DESC_SIZE) {
but it is always called with s->desc_offset == 0 and with the same
bs->file. So the data that vmdk_parent_open reads comes always from the
same place, and anyway there is only one place where it can write it,
namely bs->backing_file.
So, if it cannot happen, the patched code is okay.
It is also possible that the recursive call can happen, but only once. In
that case there would still be a bug in vmdk_open_desc_file setting
s->desc_offset = 0, but the patched code is okay.
Finally, in the case where multiple recursive calls can happen the code
would need to be rewritten anyway. It is likely that this would anyway
involve adding several parameters to vmdk_parent_open, and calling it from
vmdk_open_vmdk4.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 20 Oct 2011 11:16:19 +0000 (13:16 +0200)]
vmdk: fix return values of vmdk_parent_open
While vmdk_open_desc_file (touched by the patch) correctly changed -1
to -EINVAL, vmdk_open did not. Fix it directly in vmdk_parent_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 20 Oct 2011 14:37:26 +0000 (16:37 +0200)]
pc: Fix floppy drives with if=none
Commit
63ffb564 broke floppy devices specified on the command line like
-drive file=...,if=none,id=floppy -global isa-fdc.driveA=floppy because it
relies on drive_get() which works only with -fda/-drive if=floppy.
This patch resembles what we're already doing for IDE, i.e. remember the floppy
device that was created and use that to extract the BlockDriverStates where
needed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Kevin Wolf [Tue, 18 Oct 2011 15:12:44 +0000 (17:12 +0200)]
qcow2: Fix bdrv_write_compressed error handling
If during allocation of compressed clusters the cluster was already allocated
uncompressed, fail and properly release the l2_table (the latter avoids a
failed assertion).
While at it, make it return some real error numbers instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Kevin Wolf [Tue, 18 Oct 2011 14:19:42 +0000 (16:19 +0200)]
qemu-img: Don't allow preallocation and compression at the same time
Only qcow and qcow2 can do compression at all, and they require unallocated
clusters when writing the compressed data.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Kevin Wolf [Tue, 18 Oct 2011 14:41:45 +0000 (16:41 +0200)]
fdc: Fix floppy port I/O
The floppy device was broken by commit
212ec7ba (fdc: Convert to
isa_register_portio_list). While the old interface provided the port number
relative to the floppy drive's io_base, the new one provides the real port
number, so we need to apply a bitmask now to get the register number.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Oct 2011 10:32:14 +0000 (12:32 +0200)]
block: add bdrv_co_discard and bdrv_aio_discard support
This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Mon, 17 Oct 2011 10:32:13 +0000 (12:32 +0200)]
block: drop redundant bdrv_flush implementation
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove
the redundant .bdrv_flush() implementations.
[Paolo Bonzini: change raw driver to bdrv_co_flush]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 17 Oct 2011 10:32:12 +0000 (12:32 +0200)]
block: unify flush implementations
Add coroutine support for flush and apply the same emulation that
we already do for read/write. bdrv_aio_flush is simplified to always
go through a coroutine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Fri, 21 Oct 2011 10:16:44 +0000 (12:16 +0200)]
xen_disk: Always set feature-barrier = 1
The synchronous .bdrv_flush callback doesn't exist any more and a device really
shouldn't poke into the block layer internals anyway. All drivers are supposed
to have a correctly working bdrv_flush, so let's just hard-code this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Alex Jia [Wed, 28 Sep 2011 06:57:01 +0000 (14:57 +0800)]
fix memory leak in aio_write_f
Haven't released memory of 'ctx' before return.
Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 14 Oct 2011 08:41:29 +0000 (10:41 +0200)]
block: rename bdrv_co_rw_bh
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:17:32 +0000 (09:17 +0200)]
add socket_set_block
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Wed, 5 Oct 2011 07:17:31 +0000 (09:17 +0200)]
sheepdog: add coroutine_fn markers
This makes the following patch easier to review.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Dmitry Koshelev [Thu, 20 Oct 2011 10:48:35 +0000 (14:48 +0400)]
hw/arm_gic.c: Fix save/load of irq_target array
irq_target array saving/loading is in the wrong loop.
Version bump.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Peter Maydell [Tue, 18 Oct 2011 15:12:54 +0000 (16:12 +0100)]
hw/omap2: Wire up the IRQ for the 2430's fifth GPIO module
The OMAP2430 version of the omap-gpio device has five GPIO modules,
not four like the other OMAP2 versions; wire up the fifth module's
IRQ line correctly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Stefan Weil [Thu, 20 Oct 2011 19:55:58 +0000 (21:55 +0200)]
hw/9pfs: Fix broken compilation caused by wrong trace events
Commit
c572f23a3e7180dbeab5e86583e43ea2afed6271 added trace events
with mismatching format string and arguments.
gcc reports these errors:
In file included from trace.c:2:0:
trace.h: In function ‘trace_v9fs_attach’:
trace.h:2850:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_wstat’:
trace.h:3039:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir’:
trace.h:3088:9: error: too many arguments for format [-Werror=format-extra-args]
trace.h: In function ‘trace_v9fs_mkdir_return’:
trace.h:3095:9: error: too many arguments for format [-Werror=format-extra-args]
Fix the format strings and also use %u instead of %d for unsigned values
in the changed strings. There are more minor errors of this kind
which I did not fix because that would make the review more difficult.
v2: Fixed position of } for v9fs_mkdir_return.
Cc: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 20 Oct 2011 13:46:55 +0000 (08:46 -0500)]
Merge remote-tracking branch 'quintela/migration-pull' into staging
Anthony Liguori [Thu, 20 Oct 2011 13:43:00 +0000 (08:43 -0500)]
Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into staging
Anthony Liguori [Thu, 20 Oct 2011 13:42:08 +0000 (08:42 -0500)]
Merge remote-tracking branch 'aneesh/for-upstream-6' into staging
Conflicts:
trace-events
Juan Quintela [Wed, 23 Feb 2011 19:44:29 +0000 (20:44 +0100)]
migration: make migration-{tcp,unix} consistent
Files are almost identical in functionality, just remove the
differences that make no sense.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 23 Feb 2011 18:56:52 +0000 (19:56 +0100)]
migration: propagate error correctly
unix and tcp outgoing migration have error values, but didn't returned
it. Make them return the error. Notice that EINPROGRESS & EWOULDBLOCK
are not considered errors as call will be retry later.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Wed, 23 Feb 2011 10:52:12 +0000 (11:52 +0100)]
migration: Don't use callback on file defining it
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 22 Feb 2011 23:48:46 +0000 (00:48 +0100)]
migration: Make state definitions local
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 22 Feb 2011 23:43:59 +0000 (00:43 +0100)]
migration: Export a function that tells if the migration has finished correctly
This will allow us to hide the state values.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 5 Oct 2011 12:27:52 +0000 (14:27 +0200)]
migration: Pass MigrationState in migration notifiers
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 22 Feb 2011 23:33:19 +0000 (00:33 +0100)]
migration: Use bandwidth_limit directly
Now that current_migration always exist, there is no reason for
max_throotle variable.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Wed, 5 Oct 2011 11:50:43 +0000 (13:50 +0200)]
migration: create accessor for current_migration
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 22 Feb 2011 22:54:21 +0000 (23:54 +0100)]
migration: Move exported functions to the end of the file
This means we can remove the two forward declarations.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 11 May 2010 21:38:23 +0000 (23:38 +0200)]
migration: Remove migration cancel() callback
It is used only in one place
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 11 May 2010 21:28:53 +0000 (23:28 +0200)]
migration: Remove get_status() accessor
It is only used inside migration.c, and fields on that struct are
accessed all around the place on that file.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 11 May 2010 21:18:34 +0000 (23:18 +0200)]
migration: Our release callback was just free
We called it from a single place, and always with state !=
MIG_STATE_ACTIVE. Just remove the whole callback. For users of the
notifier, notice that this is exactly the case where they don't care,
we are just freeing the state from previous failed migration (it can't
be a sucessful one, otherwise we would not be running on that machine
in the first place).
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 22 Feb 2011 22:32:54 +0000 (23:32 +0100)]
migration: Introduce migrate_fd_completed() for consistency
This function is a bit different of the others that change the state,
in the sense that if migrate_fd_cleanup() returns an error, it set the
status to error, not completed.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 22 Feb 2011 22:18:20 +0000 (23:18 +0100)]
migration: Refactor and simplify error checking in migrate_fd_put_ready
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 11 May 2010 21:01:53 +0000 (23:01 +0200)]
migration: Introduce MIG_STATE_SETUP
Use MIG_STATE_ACTIVE only when migration has really started. Use this
new state to setup migration parameters. Change defines for an
anonymous struct.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Juan Quintela [Tue, 11 May 2010 20:27:45 +0000 (22:27 +0200)]
migration: move migrate_new to do_migrate
Once there, remove all parameters that don't need to be passed to
*start_outgoing_migration() functions
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Sun, 11 Sep 2011 18:28:22 +0000 (20:28 +0200)]
migration: Make all posible migration functions static
I have to move two functions postions to avoid forward declarations
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 11 May 2010 14:28:39 +0000 (16:28 +0200)]
migration: Refactor MigrationState creation
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Juan Quintela [Tue, 11 May 2010 13:56:35 +0000 (15:56 +0200)]
migration: Rename FdMigrationState MigrationState
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>