review.tizen.org Git - platform/kernel/linux-rpi.git/log

NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.

Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it
re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before
retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if
the retry fails. This causes problem for subsequent setattr
requests for v4 server that does not have idmapping configured.

This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER
and NFS4ERR_BADNAME and skips the retry, since the kernel isn't
involved in encoding the ACEs, and return -EINVAL.

Steps to reproduce the problem:

# mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
# touch /tmp/mnt/file1
# chown 99 /tmp/mnt/file1
# nfs4_setfacl -a A::unknown.user@xyz.com:wrtncy /tmp/mnt/file1
Failed setxattr operation: Invalid argument
# chown 99 /tmp/mnt/file1
chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument
# umount /tmp/mnt
# mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt
# chown 99 /tmp/mnt/file1
#

v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry
in nfs4_proc_set_acl.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

Linux 5.13-rc4

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"This is a bit larger than usual at rc4 time. The reason is due to
  Lee's work of fixing newly reported build warnings.

  The rest is fixes as usual"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (22 commits)
  MAINTAINERS: adjust to removing i2c designware platform data
  i2c: s3c2410: fix possible NULL pointer deref on read message after write
  i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
  i2c: i801: Don't generate an interrupt on bus reset
  i2c: mpc: implement erratum A-004447 workaround
  powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
  powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
  dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
  i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
  i2c: busses: i2c-st: Fix copy/paste function misnaming issues
  i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure
  i2c: busses: i2c-ocores: Place the expected function names into the documentation headers
  i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param
  i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'
  i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'
  i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc
  i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers
  i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'
  i2c: sh_mobile: Use new clock calculation formulas for RZ/G2E
  i2c: I2C_HISI should depend on ACPI
  ...

Merge tag 'seccomp-fixes-v5.13-rc4' of git://git./linux/kernel/git/kees/linux

Pull seccomp fixes from Kees Cook:
"This fixes a hard-to-hit race condition in the addfd user_notif
  feature of seccomp, visible since v5.9.

  And a small documentation fix"

* tag 'seccomp-fixes-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: Refactor notification handler to prepare for new semantics
  Documentation: seccomp: Fix user notification documentation

Merge tag 'riscv-for-linus-5.13-rc4' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
"A handful of RISC-V related fixes:

   - avoid errors when the stack tracing code is tracing itself.

   - resurrect the memtest= kernel command line argument on RISC-V,
     which was briefly enabled during the merge window before a
     refactoring disabled it.

   - build fix and some warning cleanups"

* tag 'riscv-for-linus-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: kexec: Fix W=1 build warnings
  riscv: kprobes: Fix build error when MMU=n
  riscv: Select ARCH_USE_MEMTEST
  riscv: stacktrace: fix the riscv stacktrace when CONFIG_FRAME_POINTER enabled

Merge tag 'xfs-5.13-fixes-3' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"This week's pile mitigates some decades-old problems in how extent
  size hints interact with realtime volumes, fixes some failures in
  online shrink, and fixes a problem where directory and symlink
  shrinking on extremely fragmented filesystems could fail.

  The most user-notable change here is to point users at our (new) IRC
  channel on OFTC. Freedom isn't free, it costs folks like you and me;
  and if you don't kowtow, they'll expel everyone and take over your
  channel. (Ok, ok, that didn't fit the song lyrics...)

  Summary:

   - Fix a bug where unmapping operations end earlier than expected,
     which can cause chaos on multi-block directory and symlink shrink
     operations.

   - Fix an erroneous assert that can trigger if we try to transition a
     bmap structure from btree format to extents format with zero
     extents. This was exposed by xfs/538"

* tag 'xfs-5.13-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: bunmapi has unnecessary AG lock ordering issues
  xfs: btree format inode forks can have zero extents
  xfs: add new IRC channel to MAINTAINERS
  xfs: validate extsz hints against rt extent size when rtinherit is set
  xfs: standardize extent size hint validation
  xfs: check free AG space when making per-AG reservations

seccomp: Refactor notification handler to prepare for new semantics

This refactors the user notification code to have a do / while loop around
the completion condition. This has a small change in semantic, in that
previously we ignored addfd calls upon wakeup if the notification had been
responded to, but instead with the new change we check for an outstanding
addfd calls prior to returning to userspace.

Rodrigo Campos also identified a bug that can result in addfd causing
an early return, when the supervisor didn't actually handle the
syscall [1].

[1]: https://lore.kernel.org/lkml/20210413160151.3301-1-rodrigo@kinvolk.io/

Fixes: 7cf97b125455 ("seccomp: Introduce addfd ioctl to seccomp user notifier")
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Rodrigo Campos <rodrigo@kinvolk.io>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-3-sargun@sargun.me

Merge tag 'thermal-v5.13-rc4' of git://git./linux/kernel/git/thermal/linux

Pull thermal fixes from Daniel Lezcano:

- Fix uninitialized error code value for the SPMI adc driver (Yang
   Yingliang)

- Fix kernel doc warning (Yang Li)

- Fix wrong read-write thermal trip point initialization (Srinivas
   Pandruvada)

* tag 'thermal-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()
  thermal/ti-soc-thermal: Fix kernel-doc
  thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALID

Merge tag 'char-misc-5.13-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some tiny char/misc driver fixes for 5.13-rc4.

  Nothing huge here, just some tiny fixes for reported issues:

   - two interconnect driver fixes

   - kgdb build warning fix for gcc-11

   - hgafb regression fix

   - soundwire driver fix

   - mei driver fix

  All have been in linux-next with no reported issues"

* tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: request autosuspend after sending rx flow control
  kgdb: fix gcc-11 warnings harder
  video: hgafb: correctly handle card detect failure during probe
  soundwire: qcom: fix handling of qcom,ports-block-pack-mode
  interconnect: qcom: Add missing MODULE_DEVICE_TABLE
  interconnect: qcom: bcm-voter: add a missing of_node_put()

Merge tag 'driver-core-5.13-rc4' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here are three small driver core / debugfs fixes for 5.13-rc4:

   - debugfs fix for incorrect "lockdown" mode for selinux accesses

   - two device link changes, one bugfix and one cleanup

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'driver-core-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  drivers: base: Reduce device link removal code duplication
  drivers: base: Fix device link removal
  debugfs: fix security_locked_down() call for SELinux

Merge tag 'staging-5.13-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging and IIO driver fixes from Greg KH:
"Here are some small IIO and staging driver fixes for reported issues
  for 5.13-rc4.

  Nothing major here, tiny changes for reported problems, full details
  are in the shortlog if people are curious.

  All have been in linux-next for a while with no reported problems"

* tag 'staging-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: ad7793: Add missing error code in ad7793_setup()
  iio: adc: ad7923: Fix undersized rx buffer.
  iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()
  iio: dac: ad5770r: Put fwnode in error case during ->probe()
  iio: gyro: fxas21002c: balance runtime power in error path
  staging: emxx_udc: fix loop in _nbu2ss_nuke()
  staging: iio: cdc: ad7746: avoid overwrite of num_channels
  iio: adc: ad7192: handle regulator voltage error first
  iio: adc: ad7192: Avoid disabling a clock that was never enabled.
  iio: adc: ad7124: Fix potential overflow due to non sequential channel numbers
  iio: adc: ad7124: Fix missbalanced regulator enable / disable on error.

Merge tag 'tty-5.13-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty / serial driver fixes from Greg KH:
"Here are some small fixes for reported problems for tty and serial
  drivers for 5.13-rc4.

  They consist of:

   - 8250 bugfixes and new device support

   - lockdown security mode fixup

   - syzbot found problems fixed

   - 8250_omap fix for interrupt storm

   - revert of 8250_omap driver fix as it caused worse problem than the
     original issue

  All but the last patch have been in linux-next for a while, the last
  one is a revert of a problem found in linux-next with the 8250_omap
  driver change"

* tag 'tty-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
  serial: 8250_pci: handle FL_NOIRQ board flag
  serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'
  serial: 8250_pci: Add support for new HPE serial device
  serial: 8250: 8250_omap: Fix possible interrupt storm
  serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*
  serial: 8250: Add UART_BUG_TXRACE workaround for Aspeed VUART
  serial: 8250_dw: Add device HID for new AMD UART controller
  serial: sh-sci: Fix off-by-one error in FIFO threshold register setting
  serial: core: fix suspicious security_locked_down() call
  serial: tegra: Fix a mask operation that is always true

Merge tag 'usb-5.13-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
"Here are a number of tiny USB and Thunderbolt driver fixes for
  5.13-rc4.

  They consist of:

   - thunderbolt fixes for some NVM bound issues

   - xhci fixes for reported problems

   - control-request fixups

   - documentation build warning fixes

   - new usb-serial driver device ids

   - typec bugfixes for reported issues

   - usbfs warning fixups (could be triggered from userspace)

   - other tiny fixes for reported problems.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  xhci: Fix 5.12 regression of missing xHC cache clearing command after a Stall
  xhci: fix giving back URB with incorrect status regression in 5.12
  usb: gadget: udc: renesas_usb3: Fix a race in usb3_start_pipen()
  usb: typec: tcpm: Respond Not_Supported if no snk_vdo
  usb: typec: tcpm: Properly interrupt VDM AMS
  USB: trancevibrator: fix control-request direction
  usb: Restore the usb_header label
  usb: typec: tcpm: Use LE to CPU conversion when accessing msg->header
  usb: typec: ucsi: Clear pending after acking connector change
  usb: typec: mux: Fix matching with typec_altmode_desc
  misc/uss720: fix memory leak in uss720_probe
  usb: dwc3: gadget: Properly track pending and queued SG
  USB: usbfs: Don't WARN about excessively large memory allocations
  thunderbolt: usb4: Fix NVM read buffer bounds and offset issue
  thunderbolt: dma_port: Fix NVM read buffer bounds and offset issue
  usb: chipidea: udc: assign interrupt number to USB gadget structure
  usb: cdnsp: Fix lack of removing request from pending list.
  usb: cdns3: Fix runtime PM imbalance on error
  USB: serial: pl2303: add device id for ADLINK ND-6530 GC
  USB: serial: ti_usb_3410_5052: add startech.com device id
  ...

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
"ARM fixes:

   - Another state update on exit to userspace fix

   - Prevent the creation of mixed 32/64 VMs

   - Fix regression with irqbypass not restarting the guest on failed
     connect

   - Fix regression with debug register decoding resulting in
     overlapping access

   - Commit exception state on exit to usrspace

   - Fix the MMU notifier return values

   - Add missing 'static' qualifiers in the new host stage-2 code

  x86 fixes:

   - fix guest missed wakeup with assigned devices

   - fix WARN reported by syzkaller

   - do not use BIT() in UAPI headers

   - make the kvm_amd.avic parameter bool

  PPC fixes:

   - make halt polling heuristics consistent with other architectures

  selftests:

   - various fixes

   - new performance selftest memslot_perf_test

   - test UFFD minor faults in demand_paging_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
  selftests: kvm: fix overlapping addresses in memslot_perf_test
  KVM: X86: Kill off ctxt->ud
  KVM: X86: Fix warning caused by stale emulation context
  KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
  KVM: x86/mmu: Fix comment mentioning skip_4k
  KVM: VMX: update vcpu posted-interrupt descriptor when assigning device
  KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK
  KVM: x86: add start_assignment hook to kvm_x86_ops
  KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch
  selftests: kvm: do only 1 memslot_perf_test run by default
  KVM: X86: Use _BITUL() macro in UAPI headers
  KVM: selftests: add shared hugetlbfs backing source type
  KVM: selftests: allow using UFFD minor faults for demand paging
  KVM: selftests: create alias mappings when using shared memory
  KVM: selftests: add shmem backing source type
  KVM: selftests: refactor vm_mem_backing_src_type flags
  KVM: selftests: allow different backing source types
  KVM: selftests: compute correct demand paging size
  KVM: selftests: simplify setup_demand_paging error handling
  KVM: selftests: Print a message if /dev/kvm is missing
  ...

Merge tag 's390-5.13-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:
"Fix races in vfio-ccw request handling"

* tag 's390-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  vfio-ccw: Serialize FSM IDLE state with I/O completion
  vfio-ccw: Reset FSM state to IDLE inside FSM
  vfio-ccw: Check initialized flag in cp_init()

selftests: kvm: fix overlapping addresses in memslot_perf_test

vm_create allocates memory and maps it close to GPA. This memory
is separate from what is allocated in subsequent calls to
vm_userspace_mem_region_add, so it is incorrect to pass the
test memory size to vm_create_default. Just pass a small
fixed amount of memory which can be used later for page table,
otherwise GPAs are already allocated at MEM_GPA and the
test aborts.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Ten small fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: qla2xxx: Wait for stop_phase1 at WWN removal
  scsi: hisi_sas: Drop free_irq() of devm_request_irq() allocated irq
  scsi: vmw_pvscsi: Set correct residual data length
  scsi: bnx2fc: Return failure if io_req is already in ABTS processing
  scsi: aic7xxx: Remove multiple definition of globals
  scsi: aic7xxx: Restore several defines for aic7xxx firmware build
  scsi: target: iblock: Fix smp_processor_id() BUG messages
  scsi: libsas: Use _safe() loop in sas_resume_port()
  scsi: target: tcmu: Fix xarray RCU warning
  scsi: target: core: Avoid smp_processor_id() in preemptible code

Merge tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request (Christoph):
      - fix a memory leak in nvme_cdev_add (Guoqing Jiang)
      - fix inline data size comparison in nvmet_tcp_queue_response (Hou
        Pu)
      - fix false keep-alive timeout when a controller is torn down
        (Sagi Grimberg)
      - fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
      - short-circuit reconnect retries for FC (Hannes Reinecke)
      - decode host pathing error for connect (Hannes Reinecke)

- MD pull request (Song):
      - Fix incorrect chunk boundary assert (Christoph)

- Fix s390/dasd verification panic (Stefan)

* tag 'block-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
  nvmet: fix false keep-alive timeout when a controller is torn down
  nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
  nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
  md/raid5: remove an incorrect assert in in_chunk_boundary
  s390/dasd: add missing discipline function
  nvme-fabrics: decode host pathing error for connect
  nvme-fc: short-circuit reconnect retries
  nvme: fix potential memory leaks in nvme_cdev_add

Merge tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"A few minor fixes:

   - Fix an issue with hashed wait removal on exit (Zqiang, Pavel)

   - Fix a recent data race introduced in this series (Marco)"

* tag 'io_uring-5.13-2021-05-28' of git://git.kernel.dk/linux-block:
  io_uring: fix data race to avoid potential NULL-deref
  io-wq: Fix UAF when wakeup wqe in hash waitqueue
  io_uring/io-wq: close io-wq full-stop gap

Merge tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Pretty quiet this week, couple of amdgpu, one i915, and a few misc otherwise.

  ttm:
   - prevent irrelevant swapout

  amdgpu:
   - MultiGPU fan fix
   - VCN powergating fixes

  amdkfd:
   - Fix SDMA register offset error

  meson:
   - fix shutdown crash

  i915:
   - Re-enable LTTPR non-transparent LT mode for DPCD_REV < 1.4"

* tag 'drm-fixes-2021-05-29' of git://anongit.freedesktop.org/drm/drm:
  drm/ttm: Skip swapout if ttm object is not populated
  drm/i915: Reenable LTTPR non-transparent LT mode for DPCD_REV<1.4
  drm/meson: fix shutdown crash when component not probed
  drm/amdgpu/jpeg3: add cancel_delayed_work_sync before power gate
  drm/amdgpu/jpeg2.5: add cancel_delayed_work_sync before power gate
  drm/amdgpu/jpeg2.0: add cancel_delayed_work_sync before power gate
  drm/amdgpu/vcn3: add cancel_delayed_work_sync before power gate
  drm/amdgpu/vcn2.5: add cancel_delayed_work_sync before power gate
  drm/amdgpu/vcn2.0: add cancel_delayed_work_sync before power gate
  drm/amdgpu/vcn1: add cancel_delayed_work_sync before power gate
  drm/amdkfd: correct sienna_cichlid SDMA RLC register offset error
  drm/amd/pm: correct MGpuFanBoost setting

Merge tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix error checking of BPF prog attachment in 'perf stat'.

- Fix getting maximum number of fds in the vendor events JSON parser.

- Move debug initialization earlier, fixing a segfault in some cases.

- Fix eventcode of power10 JSON events.

* tag 'perf-tools-fixes-for-v5.13-2021-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf vendor events powerpc: Fix eventcode of power10 JSON events
  perf stat: Fix error check for bpf_program__attach
  perf debug: Move debug initialization earlier
  perf jevents: Fix getting maximum number of fds

Merge tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three SMB3 fixes.

  Two for stable, and the other fixes a problem pointed out with a
  recently added ioctl"

* tag '5.13-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: change format of CIFS_FULL_KEY_DUMP ioctl
  cifs: fix string declarations and assignments in tracepoints
  cifs: set server->cipher_type to AES-128-CCM for SMB3.0

Merge tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"Stable fixes:
   - Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
   - Fix Oops in xs_tcp_send_request() when transport is disconnected
   - Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()

  Bugfixes:
   - Fix instances where signal_pending() should be fatal_signal_pending()
   - fix an incorrect limit in filelayout_decode_layout()
   - Fixes for the SUNRPC backlogged RPC queue
   - Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
   - Revert commit 586a0787ce35 ("Clean up rpcrdma_prepare_readch()")"

* tag 'nfs-for-5.13-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: Remove trailing semicolon in macros
  xprtrdma: Revert 586a0787ce35
  NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config
  NFS: Clean up reset of the mirror accounting variables
  NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce()
  NFS: Fix an Oopsable condition in __nfs_pageio_add_request()
  SUNRPC: More fixes for backlog congestion
  SUNRPC: Fix Oops in xs_tcp_send_request() when transport is disconnected
  NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return()
  SUNRPC in case of backlog, hand free slots directly to waiting task
  pNFS/NFSv4: Remove redundant initialization of 'rd_size'
  NFS: fix an incorrect limit in filelayout_decode_layout()
  fs/nfs: Use fatal_signal_pending instead of signal_pending

Merge tag 'sound-5.13-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A slightly high volume at this time due to pending ASoC fixes.

  While there are a few generic simple-card fixes for regressions, most
  of the changes are device-specific fixes: ASoC Intel SOF, codec
  clocks, other codec / platform fixes as well as usual HD-audio and
  USB-audio"

* tag 'sound-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (37 commits)
  ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 17 G8
  ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook Fury 15 G8
  ALSA: hda/realtek: fix mute/micmute LEDs and speaker for HP Zbook G8
  ALSA: hda/realtek: fix mute/micmute LEDs for HP 855 G8
  ALSA: hda/realtek: Chain in pop reduction fixup for ThinkStation P340
  ALSA: usb-audio: scarlett2: snd_scarlett_gen2_controls_create() can be static
  ALSA: hda/realtek: the bass speaker can't output sound on Yoga 9i
  ALSA: hda/realtek: Headphone volume is controlled by Front mixer
  ALSA: usb-audio: scarlett2: Improve driver startup messages
  ALSA: usb-audio: scarlett2: Fix device hang with ehci-pci
  ALSA: usb-audio: fix control-request direction
  ASoC: qcom: lpass-cpu: Use optional clk APIs
  ASoC: cs35l33: fix an error code in probe()
  ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
  ASoC: fsl: fix SND_SOC_IMX_RPMSG dependency
  ASoC: cs42l52: Minor tidy up of error paths
  ASoC: cs35l32: Add missing regmap use_single config
  ASoC: cs35l34: Add missing regmap use_single config
  ASoC: cs42l73: Add missing regmap use_single config
  ASoC: cs53l30: Add missing regmap use_single config
  ...

Merge tag 'clang-features-v5.13-rc4' of git://git./linux/kernel/git/kees/linux

Pull clang feature fixes from Kees Cook:

- Correctly pass stack frame size checking under LTO (Nick Desaulniers)

- Avoid CFI mismatches by checking initcall_t types (Marco Elver)

* tag 'clang-features-v5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: LTO: have linker check -Wframe-larger-than
init: verify that function is initcall_t at compile-time

Merge tag 'mips-fixes_5.13_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

- fix function/preempt trace hangs

- a few build fixes

* tag 'mips-fixes_5.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACER
  MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c
  MIPS: launch.h: add include guard to prevent build errors
  MIPS: alchemy: xxs1500: add gpio-au1000.h header file

Merge tag 'kvmarm-fixes-5.13-2' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.13, take #2

- Another state update on exit to userspace fix
- Prevent the creation of mixed 32/64 VMs

KVM: X86: Kill off ctxt->ud

ctxt->ud is consumed only by x86_decode_insn(), we can kill it off by
passing emulation_type to x86_decode_insn() and dropping ctxt->ud
altogether. Tracking that info in ctxt for literally one call is silly.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-2-git-send-email-wanpengli@tencent.com>

KVM: X86: Fix warning caused by stale emulation context

Reported by syzkaller:

  WARNING: CPU: 7 PID: 10526 at linux/arch/x86/kvm//x86.c:7621 x86_emulate_instruction+0x41b/0x510 [kvm]
  RIP: 0010:x86_emulate_instruction+0x41b/0x510 [kvm]
  Call Trace:
   kvm_mmu_page_fault+0x126/0x8f0 [kvm]
   vmx_handle_exit+0x11e/0x680 [kvm_intel]
   vcpu_enter_guest+0xd95/0x1b40 [kvm]
   kvm_arch_vcpu_ioctl_run+0x377/0x6a0 [kvm]
   kvm_vcpu_ioctl+0x389/0x630 [kvm]
   __x64_sys_ioctl+0x8e/0xd0
   do_syscall_64+0x3c/0xb0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Commit 4a1e10d5b5d8 ("KVM: x86: handle hardware breakpoints during emulation())
adds hardware breakpoints check before emulation the instruction and parts of
emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag
here and the emulation context will not be reused. Commit c8848cee74ff ("KVM: x86:
set ctxt->have_exception in x86_decode_insn()) triggers the warning because it
catches the stale emulation context has #UD, however, it is not during instruction
decoding which should result in EMULATION_FAILED. This patch fixes it by moving
the second part emulation context initialization into init_emulate_ctxt() and
before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up
patch.

syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=134683fdd00000

Reported-by: syzbot+71271244f206d17f6441@syzkaller.appspotmail.com
Fixes: 4a1e10d5b5d8 (KVM: x86: handle hardware breakpoints during emulation)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <1622160097-37633-1-git-send-email-wanpengli@tencent.com>

KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception

The kvm_get_linear_rip() handles x86/long mode cases well and has
better readability, __kvm_set_rflags() also use the paired
function kvm_is_linear_rip() to check the vcpu->arch.singlestep_rip
set in kvm_arch_vcpu_ioctl_set_guest_debug(), so change the
"CS.BASE + RIP" code in kvm_arch_vcpu_ioctl_set_guest_debug() and
handle_exception_nmi() to this one.

Signed-off-by: Yuan Yao <yuan.yao@intel.com>
Message-Id: <20210526063828.1173-1-yuan.yao@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Documentation: seccomp: Fix user notification documentation

The documentation had some previously incorrect information about how
userspace notifications (and responses) were handled due to a change
from a previously proposed patchset.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Tycho Andersen <tycho@tycho.pizza>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210517193908.3113-2-sargun@sargun.me

MAINTAINERS: adjust to removing i2c designware platform data

Commit 5a517b5bf687 ("i2c: designware: Get rid of legacy platform data")
removes ./include/linux/platform_data/i2c-designware.h, but misses to
adjust the SYNOPSYS DESIGNWARE I2C DRIVER section in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains:

warning: no file matches F: include/linux/platform_data/i2c-designware.h

Remove the file entry to this removed file as well.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

perf vendor events powerpc: Fix eventcode of power10 JSON events

Fixed the eventcode values in the power10 JSON event files to prepend
"0x" since these are hexadecimal values.

The patch also changes the event description of the PM_EXEC_STALL_LOAD_FINISH
and PM_EXEC_STALL_NTC_FLUSH event and move some events to correct files.

Fixes: 32daa5d7899e ("perf vendor events: Initial JSON/events list for power10 platform")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Paul A. Clarke <pc@us.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20210525063723.1191514-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"

This reverts commit 31fae7c8b18c3f8029a2a5dce97a3182c1a167a0.

Tony writes:
I just noticed this causes the following regression in Linux
next when pressing a key on uart console after boot at least on
omap3. This seems to happen on serial_port_in(port, UART_RX) in
the quirk handling.

So let's drop this.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YLCCJzkkB4N7LTQS@atomide.com
Fixes: 31fae7c8b18c ("serial: 8250: 8250_omap: Fix possible interrupt storm")
Reported-by: Tony Lindgren <tony@atomide.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: s3c2410: fix possible NULL pointer deref on read message after write

Interrupt handler processes multiple message write requests one after
another, till the driver message queue is drained.  However if driver
encounters a read message without preceding START, it stops the I2C
transfer as it is an invalid condition for the controller.  At least the
comment describes a requirement "the controller forces us to send a new
START when we change direction".  This stop results in clearing the
message queue (i2c->msg = NULL).

The code however immediately jumped back to label "retry_write" which
dereferenced the "i2c->msg" making it a possible NULL pointer
dereference.

The Coverity analysis:
1. Condition !is_msgend(i2c), taking false branch.
   if (!is_msgend(i2c)) {

2. Condition !is_lastmsg(i2c), taking true branch.
   } else if (!is_lastmsg(i2c)) {

3. Condition i2c->msg->flags & 1, taking true branch.
   if (i2c->msg->flags & I2C_M_RD) {

4. write_zero_model: Passing i2c to s3c24xx_i2c_stop, which sets i2c->msg to NULL.
   s3c24xx_i2c_stop(i2c, -EINVAL);

5. Jumping to label retry_write.
   goto retry_write;

6. var_deref_model: Passing i2c to is_msgend, which dereferences null i2c->msg.
   if (!is_msgend(i2c)) {"

All previous calls to s3c24xx_i2c_stop() in this interrupt service
routine are followed by jumping to end of function (acknowledging
the interrupt and returning).  This seems a reasonable choice also here
since message buffer was entirely emptied.

Addresses-Coverity: Explicit null dereferenced
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset

The i2c controller driver do dma reset after transfer timeout,
but sometimes dma reset will trigger an unexpected DMA_ERR irq.
It will cause the i2c controller to continuously send interrupts
to the system and cause soft lock-up. So we need to disable i2c
start_en and clear intr_stat to stop i2c controller before dma
reset when transfer timeout.

Fixes: aafced673c06("i2c: mediatek: move dma reset before i2c reset")
Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Merge tag 'drm-intel-fixes-2021-05-27' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.13-rc4:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV<1.4

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875yz4bnmj.fsf@intel.com

Merge tag 'drm-misc-fixes-2021-05-27' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

A fix in meson for a crash at shutdown and one for TTM to prevent
irrelevant swapout

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527120828.3w7f53krzkslc4ii@gilmour

perf stat: Fix error check for bpf_program__attach

It seems the bpf_program__attach() returns a negative error code instead
of a NULL pointer in case of error.

Fixes: 7fac83aaf2ee ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20210527220052.1657578-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'amd-drm-fixes-5.13-2021-05-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.13-2021-05-26:

amdgpu:
- MultiGPU fan fix
- VCN powergating fixes

amdkfd:
- Fix SDMA register offset error

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527031831.4057-1-alexander.deucher@amd.com

Merge branch 'for-5.13-fixes' of git://git./linux/kernel/git/dennis/percpu

Pull percpu fixes from Dennis Zhou:
"This contains a cleanup to lib/percpu-refcount.c and an update to the
  MAINTAINERS file to more formally take over support for lib/percpu*"

* 'for-5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  MAINTAINERS: Add lib/percpu* as part of percpu entry
  percpu_ref: Don't opencode percpu_ref_is_dying

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

- Don't use contiguous or block mappings for the linear map when KFENCE
   is enabled.

- Fix link in the arch_counter_enforce_ordering() comment.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: don't use CON and BLK mapping if KFENCE is enabled
  arm64: Fix stale link in the arch_counter_enforce_ordering() comment

Merge tag 'for-5.13/dm-fixes-2' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- Fix DM verity target's 'require_signatures' module_param permissions.

- Revert DM snapshot fix from v5.13-rc3 and then properly fix crash
   when an origin has no snapshots. This allows only the proper fix to
   go to stable@ (since the original fix was successfully dropped).

* tag 'for-5.13/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm snapshot: properly fix a crash when an origin has no snapshots
  dm snapshot: revert "fix a crash when an origin has no snapshots"
  dm verity: fix require_signatures module_param permissions

cifs: change format of CIFS_FULL_KEY_DUMP ioctl

Make CIFS_FULL_KEY_DUMP ioctl able to return variable-length keys.

* userspace needs to pass the struct size along with optional
  session_id and some space at the end to store keys
* if there is enough space kernel returns keys in the extra space and
  sets the length of each key via xyz_key_length fields

This also fixes the build error for get_user() on ARM.

Sample program:

#include <stdlib.h>
#include <stdio.h>
#include <stdint.h>
#include <sys/fcntl.h>
#include <sys/ioctl.h>

struct smb3_full_key_debug_info {
        uint32_t   in_size;
        uint64_t   session_id;
        uint16_t   cipher_type;
        uint8_t    session_key_length;
        uint8_t    server_in_key_length;
        uint8_t    server_out_key_length;
        uint8_t    data[];
        /*
         * return this struct with the keys appended at the end:
         * uint8_t session_key[session_key_length];
         * uint8_t server_in_key[server_in_key_length];
         * uint8_t server_out_key[server_out_key_length];
         */
} __attribute__((packed));

#define CIFS_IOCTL_MAGIC 0xCF
#define CIFS_DUMP_FULL_KEY _IOWR(CIFS_IOCTL_MAGIC, 10, struct smb3_full_key_debug_info)

void dump(const void *p, size_t len) {
        const char *hex = "0123456789ABCDEF";
        const uint8_t *b = p;
        for (int i = 0; i < len; i++)
                printf("%c%c ", hex[(b[i]>>4)&0xf], hex[b[i]&0xf]);
        putchar('\n');
}

int main(int argc, char **argv)
{
        struct smb3_full_key_debug_info *keys;
        uint8_t buf[sizeof(*keys)+1024] = {0};
        size_t off = 0;
        int fd, rc;

        keys = (struct smb3_full_key_debug_info *)&buf;
        keys->in_size = sizeof(buf);

        fd = open(argv[1], O_RDONLY);
        if (fd < 0)
                perror("open"), exit(1);

        rc = ioctl(fd, CIFS_DUMP_FULL_KEY, keys);
        if (rc < 0)
                perror("ioctl"), exit(1);

        printf("SessionId      ");
        dump(&keys->session_id, 8);
        printf("Cipher         %04x\n", keys->cipher_type);

        printf("SessionKey     ");
        dump(keys->data+off, keys->session_key_length);
        off += keys->session_key_length;

        printf("ServerIn Key   ");
        dump(keys->data+off, keys->server_in_key_length);
        off += keys->server_in_key_length;

        printf("ServerOut Key  ");
        dump(keys->data+off, keys->server_out_key_length);

        return 0;
}

Usage:

$ gcc -o dumpkeys dumpkeys.c

Against Windows Server 2020 preview (with AES-256-GCM support):

# mount.cifs //$ip/test /mnt -o "username=administrator,password=foo,vers=3.0,seal"
# ./dumpkeys /mnt/somefile
SessionId      0D 00 00 00 00 0C 00 00
Cipher         0002
SessionKey     AB CD CC 0D E4 15 05 0C 6F 3C 92 90 19 F3 0D 25
ServerIn Key   73 C6 6A C8 6B 08 CF A2 CB 8E A5 7D 10 D1 5B DC
ServerOut Key  6D 7E 2B A1 71 9D D7 2B 94 7B BA C4 F0 A5 A4 F8
# umount /mnt

With 256 bit keys:

# echo 1 > /sys/module/cifs/parameters/require_gcm_256
# mount.cifs //$ip/test /mnt -o "username=administrator,password=foo,vers=3.11,seal"
# ./dumpkeys /mnt/somefile
SessionId      09 00 00 00 00 0C 00 00
Cipher         0004
SessionKey     93 F5 82 3B 2F B7 2A 50 0B B9 BA 26 FB 8C 8B 03
ServerIn Key   6C 6A 89 B2 CB 7B 78 E8 04 93 37 DA 22 53 47 DF B3 2C 5F 02 26 70 43 DB 8D 33 7B DC 66 D3 75 A9
ServerOut Key  04 11 AA D7 52 C7 A8 0F ED E3 93 3A 65 FE 03 AD 3F 63 03 01 2B C0 1B D7 D7 E5 52 19 7F CC 46 B4

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

i2c: i801: Don't generate an interrupt on bus reset

Now that the i2c-i801 driver supports interrupts, setting the KILL bit
in a attempt to recover from a timed out transaction triggers an
interrupt. Unfortunately, the interrupt handler (i801_isr) is not
prepared for this situation and will try to process the interrupt as
if it was signaling the end of a successful transaction. In the case
of a block transaction, this can result in an out-of-range memory
access.

This condition was reproduced several times by syzbot:
https://syzkaller.appspot.com/bug?extid=ed71512d469895b5b34e
https://syzkaller.appspot.com/bug?extid=8c8dedc0ba9e03f6c79e
https://syzkaller.appspot.com/bug?extid=c8ff0b6d6c73d81b610e
https://syzkaller.appspot.com/bug?extid=33f6c360821c399d69eb
https://syzkaller.appspot.com/bug?extid=be15dc0b1933f04b043a
https://syzkaller.appspot.com/bug?extid=b4d3fd1dfd53e90afd79

So disable interrupts while trying to reset the bus. Interrupts will
be enabled again for the following transaction.

Fixes: 636752bcb517 ("i2c-i801: Enable IRQ for SMBus transactions")
Reported-by: syzbot+b4d3fd1dfd53e90afd79@syzkaller.appspotmail.com
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: mpc: implement erratum A-004447 workaround

The P2040/P2041 has an erratum where the normal i2c recovery mechanism
does not work. Implement the alternative recovery mechanism documented
in the P2040 Chip Errata Rev Q.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers

The i2c controllers on the P1010 have an erratum where the documented
scheme for i2c bus recovery will not work (A-004447). A different
mechanism is needed which is documented in the P1010 Chip Errata Rev L.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers

The i2c controllers on the P2040/P2041 have an erratum where the
documented scheme for i2c bus recovery will not work (A-004447). A
different mechanism is needed which is documented in the P2040 Chip
Errata Rev Q (latest available at the time of writing).

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag

Document the fsl,i2c-erratum-a004447 flag which indicates the presence
of an i2c erratum on some QorIQ SoCs.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-stm32f4.c:321: warning: expecting prototype for stm32f4_i2c_write_ byte()(). Prototype was for stm32f4_i2c_write_byte() instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-st: Fix copy/paste function misnaming issues

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-st.c:531: warning: expecting prototype for st_i2c_handle_write(). Prototype was for st_i2c_handle_read() instead
drivers/i2c/busses/i2c-st.c:566: warning: expecting prototype for st_i2c_isr(). Prototype was for st_i2c_isr_thread() instead

Fix the "enmpty" typo while here.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-pnx: Provide descriptions for 'alg_data' data structure

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-pnx.c:147: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:147: warning: Excess function parameter 'adap' description in 'i2c_pnx_start'
drivers/i2c/busses/i2c-pnx.c:202: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:202: warning: Excess function parameter 'adap' description in 'i2c_pnx_stop'
drivers/i2c/busses/i2c-pnx.c:231: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:231: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_xmit'
drivers/i2c/busses/i2c-pnx.c:301: warning: Function parameter or member 'alg_data' not described in 'i2c_pnx_master_rcv'
drivers/i2c/busses/i2c-pnx.c:301: warning: Excess function parameter 'adap' description in 'i2c_pnx_master_rcv'

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-ocores: Place the expected function names into the documentation headers

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-ocores.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:267: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:299: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/i2c/busses/i2c-ocores.c:347: warning: expecting prototype for It handles an IRQ(). Prototype was for ocores_process_polling() instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-eg20t: Fix 'bad line' issue and provide description for 'msgs' param

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-eg20t.c:151: warning: bad line: PCH i2c controller
drivers/i2c/busses/i2c-eg20t.c:369: warning: Function parameter or member 'msgs' not described in 'pch_i2c_writebytes'

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-designware-master: Fix misnaming of 'i2c_dw_init_master()'

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-designware-master.c:176: warning: expecting prototype for i2c_dw_init(). Prototype was for i2c_dw_init_master() instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-cadence: Fix incorrectly documented 'enum cdns_i2c_slave_mode'

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-cadence.c:157: warning: expecting prototype for enum cdns_i2c_slave_mode. Prototype was for enum cdns_i2c_slave_state instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-ali1563: File headers are not good candidates for kernel-doc

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-ali1563.c:24: warning: expecting prototype for i2c(). Prototype was for ALI1563_MAX_TIMEOUT() instead

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: muxes: i2c-arb-gpio-challenge: Demote non-conformant kernel-doc headers

Fixes the following W=1 kernel build warning(s):

drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:43: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_select'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'muxc' not described in 'i2c_arbitrator_deselect'
drivers/i2c/muxes/i2c-arb-gpio-challenge.c:86: warning: Function parameter or member 'chan' not described in 'i2c_arbitrator_deselect'

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

i2c: busses: i2c-nomadik: Fix formatting issue pertaining to 'timeout'

Fixes the following W=1 kernel build warning(s):

drivers/i2c/busses/i2c-nomadik.c:184: warning: Function parameter or member 'timeout' not described in 'nmk_i2c_dev'

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

cifs: fix string declarations and assignments in tracepoints

We missed using the variable length string macros in several
tracepoints. Fixed them in this change.

There's probably more useful macros that we can use to print
others like flags etc. But I'll submit sepawrate patches for
those at a future date.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.12
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs: set server->cipher_type to AES-128-CCM for SMB3.0

SMB3.0 doesn't have encryption negotiate context but simply uses
the SMB2_GLOBAL_CAP_ENCRYPTION flag.

When that flag is present in the neg response cifs.ko uses AES-128-CCM
which is the only cipher available in this context.

cipher_type was set to the server cipher only when parsing encryption
negotiate context (SMB3.1.1).

For SMB3.0 it was set to 0. This means cipher_type value can be 0 or 1
for AES-128-CCM.

Fix this by checking for SMB3.0 and encryption capability and setting
cipher_type appropriately.

Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'acpi-5.13-rc4' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
  occur on some systems due to attempts to turn off ACPI power resources
  that are already off (which should work according to the ACPI
  specification)"

* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: power: Refine turning off unused power resources

Merge tag 'iommu-fixes-v5.13-rc3' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

- Important fix for the AMD IOMMU driver in the recently added
   page-specific invalidation code to fix a calculation.

- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
   switches domain types.

- Fixes for the Intel VT-d driver to check for allocation failure and
   do correct cleanup.

- Another fix for Intel VT-d to not allow supervisor page requests from
   devices when using second level page translation.

- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver

* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix sysfs leak in alloc_iommu()
  iommu/vt-d: Use user privilege for RID2PASID translation
  iommu/vt-d: Check for allocation failure in aux_detach_device()
  iommu/virtio: Add missing MODULE_DEVICE_TABLE
  iommu/amd: Fix wrong parentheses on page-specific invalidations
  iommu/amd: Clear DMA ops when switching domain

perf debug: Move debug initialization earlier

This avoids segfaults during option handlers that use pr_err. For
example, "perf --debug nopager list" segfaults before this change.

Fixes: 8abceacff87d (perf debug: Add debug_set_file function)
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210519164447.2672030-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

afs: Fix the nlink handling of dir-over-dir rename

Fix rename of one directory over another such that the nlink on the deleted
directory is cleared to 0 rather than being decremented to 1.

This was causing the generic/035 xfstest to fail.

Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/162194384460.3999479.7605572278074191079.stgit@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

xfs: bunmapi has unnecessary AG lock ordering issues

large directory block size operations are assert failing because
xfs_bunmapi() is not completely removing fragmented directory blocks
like so:

XFS: Assertion failed: done, file: fs/xfs/libxfs/xfs_dir2.c, line: 677
....
Call Trace:
xfs_dir2_shrink_inode+0x1a8/0x210
xfs_dir2_block_to_sf+0x2ae/0x410
xfs_dir2_block_removename+0x21a/0x280
xfs_dir_removename+0x195/0x1d0
xfs_rename+0xb79/0xc50
? avc_has_perm+0x8d/0x1a0
? avc_has_perm_noaudit+0x9a/0x120
xfs_vn_rename+0xdb/0x150
vfs_rename+0x719/0xb50
? __lookup_hash+0x6a/0xa0
do_renameat2+0x413/0x5e0
__x64_sys_rename+0x45/0x50
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae

We are aborting the bunmapi() pass because of this specific chunk of
code:

                /*
                 * Make sure we don't touch multiple AGF headers out of order
                 * in a single transaction, as that could cause AB-BA deadlocks.
                 */
                if (!wasdel && !isrt) {
                        agno = XFS_FSB_TO_AGNO(mp, del.br_startblock);
                        if (prev_agno != NULLAGNUMBER && prev_agno > agno)
                                break;
                        prev_agno = agno;
                }

This is designed to prevent deadlocks in AGF locking when freeing
multiple extents by ensuring that we only ever lock in increasing
AG number order. Unfortunately, this also violates the "bunmapi will
always succeed" semantic that some high level callers depend on,
such as xfs_dir2_shrink_inode(), xfs_da_shrink_inode() and
xfs_inactive_symlink_rmt().

This AG lock ordering was introduced back in 2017 to fix deadlocks
triggered by generic/299 as reported here:

https://lore.kernel.org/linux-xfs/800468eb-3ded-9166-20a4-047de8018582@gmail.com/

This codebase is old enough that it was before we were defering all
AG based extent freeing from within xfs_bunmapi(). THat is, we never
actually lock AGs in xfs_bunmapi() any more - every non-rt based
extent free is added to the defer ops list, as is all BMBT block
freeing. And RT extents are not RT based, so there's no lock
ordering issues associated with them.

Hence this AGF lock ordering code is both broken and dead. Let's
just remove it so that the large directory block code works reliably
again.

Tested against xfs/538 and generic/299 which is the original test
that exposed the deadlocks that this code fixed.

Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: btree format inode forks can have zero extents

xfs/538 is assert failing with this trace when testing with
directory block sizes of 64kB:

XFS: Assertion failed: !xfs_need_iread_extents(ifp), file: fs/xfs/libxfs/xfs_bmap.c, line: 608
....
Call Trace:
xfs_bmap_btree_to_extents+0x2a9/0x470
? kmem_cache_alloc+0xe7/0x220
__xfs_bunmapi+0x4ca/0xdf0
xfs_bunmapi+0x1a/0x30
xfs_dir2_shrink_inode+0x71/0x210
xfs_dir2_block_to_sf+0x2ae/0x410
xfs_dir2_block_removename+0x21a/0x280
xfs_dir_removename+0x195/0x1d0
xfs_remove+0x244/0x460
xfs_vn_unlink+0x53/0xa0
? selinux_inode_unlink+0x13/0x20
vfs_unlink+0x117/0x220
do_unlinkat+0x1a2/0x2d0
__x64_sys_unlink+0x42/0x60
do_syscall_64+0x3a/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae

This is a check to ensure that the extents have been read into
memory before we are doing a ifork btree manipulation. This assert
is bogus in the above case.

We have a fragmented directory block that has more extents in it
than can fit in extent format, so the inode data fork is in btree
format. xfs_dir2_shrink_inode() asks to remove all remaining 16
filesystem blocks from the inode so it can convert to short form,
and __xfs_bunmapi() removes all the extents. We now have a data fork
in btree format but have zero extents in the fork. This incorrectly
trips the xfs_need_iread_extents() assert because it assumes that an
empty extent btree means the extent tree has not been read into
memory yet. This is clearly not the case with xfs_bunmapi(), as it
has an explicit call to xfs_iread_extents() in it to pull the
extents into memory before it starts unmapping.

Also, the assert directly after this bogus one is:

ASSERT(ifp->if_format == XFS_DINODE_FMT_BTREE);

Which covers the context in which it is legal to call
xfs_bmap_btree_to_extents just fine. Hence we should just remove the
bogus assert as it is clearly wrong and causes a regression.

The returns the test behaviour to the pre-existing assert failure in
xfs_dir2_shrink_inode() that indicates xfs_bunmapi() has failed to
remove all the extents in the range it was asked to unmap.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

iommu/vt-d: Fix sysfs leak in alloc_iommu()

iommu_device_sysfs_add() is called before, so is has to be cleaned on subsequent
errors.

Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device")
Cc: stable@vger.kernel.org # 4.11.x
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/17411490.HIIP88n32C@mobilepool36.emlix.com
Link: https://lore.kernel.org/r/20210525070802.361755-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>

io_uring: fix data race to avoid potential NULL-deref

Commit ba5ef6dc8a82 ("io_uring: fortify tctx/io_wq cleanup") introduced
setting tctx->io_wq to NULL a bit earlier. This has caused KCSAN to
detect a data race between accesses to tctx->io_wq:

  write to 0xffff88811d8df330 of 8 bytes by task 3709 on cpu 1:
   io_uring_clean_tctx                  fs/io_uring.c:9042 [inline]
   __io_uring_cancel                    fs/io_uring.c:9136
   io_uring_files_cancel                include/linux/io_uring.h:16 [inline]
   do_exit                              kernel/exit.c:781
   do_group_exit                        kernel/exit.c:923
   get_signal                           kernel/signal.c:2835
   arch_do_signal_or_restart            arch/x86/kernel/signal.c:789
   handle_signal_work                   kernel/entry/common.c:147 [inline]
   exit_to_user_mode_loop               kernel/entry/common.c:171 [inline]
   ...
  read to 0xffff88811d8df330 of 8 bytes by task 6412 on cpu 0:
   io_uring_try_cancel_iowq             fs/io_uring.c:8911 [inline]
   io_uring_try_cancel_requests         fs/io_uring.c:8933
   io_ring_exit_work                    fs/io_uring.c:8736
   process_one_work                     kernel/workqueue.c:2276
   ...

With the config used, KCSAN only reports data races with value changes:
this implies that in the case here we also know that tctx->io_wq was
non-NULL. Therefore, depending on interleaving, we may end up with:

              [CPU 0]                 |        [CPU 1]
  io_uring_try_cancel_iowq()          | io_uring_clean_tctx()
    if (!tctx->io_wq) // false        |   ...
    ...                               |   tctx->io_wq = NULL
    io_wq_cancel_cb(tctx->io_wq, ...) |   ...
      -> NULL-deref                   |

Note: It is likely that thus far we've gotten lucky and the compiler
optimizes the double-read into a single read into a register -- but this
is never guaranteed, and can easily change with a different config!

Fix the data race by restoring the previous behaviour, where both
setting io_wq to NULL and put of the wq are _serialized_ after
concurrent io_uring_try_cancel_iowq() via acquisition of the uring_lock
and removal of the node in io_uring_del_task_file().

Fixes: ba5ef6dc8a82 ("io_uring: fortify tctx/io_wq cleanup")
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Reported-by: syzbot+bf2b3d0435b9b728946c@syzkaller.appspotmail.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20210527092547.2656514-1-elver@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme into block-5.13

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.13

- fix a memory leak in nvme_cdev_add (Guoqing Jiang)
- fix inline data size comparison in nvmet_tcp_queue_response (Hou Pu)
- fix false keep-alive timeout when a controller is torn down
   (Sagi Grimberg)
- fix a nvme-tcp Kconfig dependency (Sagi Grimberg)
- short-circuit reconnect retries for FC (Hannes Reinecke)
- decode host pathing error for connect (Hannes Reinecke)"

* tag 'nvme-5.13-2021-05-27' of git://git.infradead.org/nvme:
  nvmet: fix false keep-alive timeout when a controller is torn down
  nvmet-tcp: fix inline data size comparison in nvmet_tcp_queue_response
  nvme-tcp: remove incorrect Kconfig dep in BLK_DEV_NVME
  nvme-fabrics: decode host pathing error for connect
  nvme-fc: short-circuit reconnect retries
  nvme: fix potential memory leaks in nvme_cdev_add

serial: 8250_pci: handle FL_NOIRQ board flag

In commit 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
the way the irq gets allocated was changed. With that change the
handling FL_NOIRQ got lost. Restore the old behaviour.

Fixes: 8428413b1d14 ("serial: 8250_pci: Implement MSI(-X) support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://lore.kernel.org/r/20210527095529.26281-1-christian.gmeiner@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfs: Remove trailing semicolon in macros

Macros should not use a trailing semicolon.

Signed-off-by: Huilong Deng <denghuilong@cdjrlc.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

mei: request autosuspend after sending rx flow control

A rx flow control waiting in the control queue may block autosuspend.
Re-request autosuspend after flow control been sent to unblock
the transition to the low power state.

Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'icc-5.13-rc4' of git://git./linux/kernel/git/djakov/icc into char-misc-linus

Grorgi writes:

interconnect fixes for v5.13

This contains two tiny driver fixes:

- bcm-voter: Add missing MODULE_DEVICE_TABLE
- bcm-voter: Add a missing of_node_put()

Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add missing MODULE_DEVICE_TABLE
interconnect: qcom: bcm-voter: add a missing of_node_put()

KVM: x86/mmu: Fix comment mentioning skip_4k

This comment was left over from a previous version of the patch that
introduced wrprot_gfn_range, when skip_4k was passed in instead of
min_level.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210526163227.3113557-1-dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

xprtrdma: Revert 586a0787ce35

Commit 9ed5af268e88 ("SUNRPC: Clean up the handling of page padding
in rpc_prepare_reply_pages()") [Dec 2020] affects RPC Replies that
have a data payload (i.e., Write chunks).

rpcrdma_prepare_readch(), as its name suggests, sets up Read chunks
which are data payloads within RPC Calls. Those payloads are
constructed by xdr_write_pages(), which continues to stuff the call
buffer's tail kvec with the payload's XDR roundup. Thus removing
the tail buffer logic in rpcrdma_prepare_readch() was the wrong
thing to do.

Fixes: 586a0787ce35 ("xprtrdma: Clean up rpcrdma_prepare_readch()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

NFSv4: Fix v4.0/v4.1 SEEK_DATA return -ENOTSUPP when set NFS_V4_2 config

Since commit bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors"),
nfs42_proc_llseek would return -EOPNOTSUPP rather than -ENOTSUPP when
SEEK_DATA on NFSv4.0/v4.1.

This will lead xfstests generic/285 not run on NFSv4.0/v4.1 when set the
CONFIG_NFS_V4_2, rather than run failed.

Fixes: bdcc2cd14e4e ("NFSv4.2: handle NFS-specific llseek errors")
Cc: <stable.vger.kernel.org> # 4.2
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

KVM: VMX: update vcpu posted-interrupt descriptor when assigning device

For VMX, when a vcpu enters HLT emulation, pi_post_block will:

1) Add vcpu to per-cpu list of blocked vcpus.

2) Program the posted-interrupt descriptor "notification vector"
to POSTED_INTR_WAKEUP_VECTOR

With interrupt remapping, an interrupt will set the PIR bit for the
vector programmed for the device on the CPU, test-and-set the
ON bit on the posted interrupt descriptor, and if the ON bit is clear
generate an interrupt for the notification vector.

This way, the target CPU wakes upon a device interrupt and wakes up
the target vcpu.

Problem is that pi_post_block only programs the notification vector
if kvm_arch_has_assigned_device() is true. Its possible for the
following to happen:

1) vcpu V HLTs on pcpu P, kvm_arch_has_assigned_device is false,
notification vector is not programmed
2) device is assigned to VM
3) device interrupts vcpu V, sets ON bit
(notification vector not programmed, so pcpu P remains in idle)
4) vcpu 0 IPIs vcpu V (in guest), but since pi descriptor ON bit is set,
kvm_vcpu_kick is skipped
5) vcpu 0 busy spins on vcpu V's response for several seconds, until
RCU watchdog NMIs all vCPUs.

To fix this, use the start_assignment kvm_x86_ops callback to kick
vcpus out of the halt loop, so the notification vector is
properly reprogrammed to the wakeup vector.

Reported-by: Pei Zhang <pezhang@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210526172014.GA29007@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK

KVM_REQ_UNBLOCK will be used to exit a vcpu from
its inner vcpu halt emulation loop.

Rename KVM_REQ_PENDING_TIMER to KVM_REQ_UNBLOCK, switch
PowerPC to arch specific request bit.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.303768132@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: x86: add start_assignment hook to kvm_x86_ops

Add a start_assignment hook to kvm_x86_ops, which is called when
kvm_arch_start_assignment is done.

The hook is required to update the wakeup vector of a sleeping vCPU
when a device is assigned to the guest.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20210525134321.254128742@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: LAPIC: Narrow the timer latency between wait_lapic_expire and world switch

Let's treat lapic_timer_advance_ns automatic tuning logic as hypervisor
overhead, move it before wait_lapic_expire instead of between wait_lapic_expire
and the world switch, the wait duration should be calculated by the
up-to-date guest_tsc after the overhead of automatic tuning logic. This
patch reduces ~30+ cycles for kvm-unit-tests/tscdeadline-latency when testing
busy waits.

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1621339235-11131-5-git-send-email-wanpengli@tencent.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: do only 1 memslot_perf_test run by default

The test takes a long time with the current implementation of
memslots, so cut the run time a bit.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: X86: Use _BITUL() macro in UAPI headers

Replace BIT() in KVM's UPAI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.

Fixes: fb04a1eddb1a ("KVM: X86: Implement ring-based dirty memory tracking")
Signed-off-by: Joe Richey <joerichey@google.com>
Message-Id: <20210521085849.37676-3-joerichey94@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: add shared hugetlbfs backing source type

This lets us run the demand paging test on top of a shared
hugetlbfs-backed area. The "shared" is key, as this allows us to
exercise userfaultfd minor faults on hugetlbfs.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-11-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: allow using UFFD minor faults for demand paging

UFFD handling of MINOR faults is a new feature whose use case is to
speed up demand paging (compared to MISSING faults). So, it's
interesting to let this selftest exercise this new mode.

Modify the demand paging test to have the option of using UFFD minor
faults, as opposed to missing faults. Now, when turning on userfaultfd
with '-u', the desired mode has to be specified ("MISSING" or "MINOR").

If we're in minor mode, before registering, prefault via the *alias*.
This way, the guest will trigger minor faults, instead of missing
faults, and we can UFFDIO_CONTINUE to resolve them.

Modify the page fault handler function to use the right ioctl depending
on the mode we're running in. In MINOR mode, use UFFDIO_CONTINUE.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-10-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: create alias mappings when using shared memory

When a memory region is added with a src_type specifying that it should
use some kind of shared memory, also create an alias mapping to the same
underlying physical pages.

And, add an API so tests can get access to these alias addresses.
Basically, for a guest physical address, let us look up the analogous
host *alias* address.

In a future commit, we'll modify the demand paging test to take
advantage of this to exercise UFFD minor faults. The idea is, we
pre-fault the underlying pages *via the alias*. When the *guest*
faults, it gets a "minor" fault (PTEs don't exist yet, but a page is
already in the page cache). Then, the userfaultfd theads can handle the
fault: they could potentially modify the underlying memory *via the
alias* if they wanted to, and then they install the PTEs and let the
guest carry on via a UFFDIO_CONTINUE ioctl.

Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-9-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: add shmem backing source type

This lets us run the demand paging test on top of a shmem-backed area.
In follow-up commits, we'll 1) leverage this new capability to create an
alias mapping, and then 2) use the alias mapping to exercise UFFD minor
faults.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-8-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: refactor vm_mem_backing_src_type flags

Each struct vm_mem_backing_src_alias has a flags field, which denotes
the flags used to mmap() an area of that type. Previously, this field
never included MAP_PRIVATE | MAP_ANONYMOUS, because
vm_userspace_mem_region_add assumed that *all* types would always use
those flags, and so it hardcoded them.

In a follow-up commit, we'll add a new type: shmem. Areas of this type
must not have MAP_PRIVATE | MAP_ANONYMOUS, and instead they must have
MAP_SHARED.

So, refactor things. Make it so that the flags field of
struct vm_mem_backing_src_alias really is a complete set of flags, and
don't add in any extras in vm_userspace_mem_region_add. This will let us
easily tack on shmem.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-7-axelrasmussen@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: allow different backing source types

Add an argument which lets us specify a different backing memory type
for the test. The default is just to use anonymous, matching existing
behavior.

This is in preparation for testing UFFD minor faults. For that, we'll
need to use a new backing memory type which is setup with MAP_SHARED.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-6-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: compute correct demand paging size

This is a preparatory commit needed before we can use different kinds of
backing pages for guest memory.

Previously, we used perf_test_args.host_page_size, which is the host's
native page size (commonly 4K). For VM_MEM_SRC_ANONYMOUS this turns out
to be okay, but in a follow-up commit we want to allow using different
kinds of backing memory.

Take VM_MEM_SRC_ANONYMOUS_HUGETLB for example. Without this change, if
we used that backing page type, when we issued a UFFDIO_COPY ioctl we'd
only do so with 4K, rather than the full 2M of a backing hugepage. In
this case, UFFDIO_COPY returns -EINVAL (__mcopy_atomic_hugetlb checks
the size).

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-5-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: simplify setup_demand_paging error handling

A small cleanup. Our caller writes:

r = setup_demand_paging(...);
if (r < 0) exit(-r);

Since we're just going to exit anyway, instead of returning an error we
can just re-use TEST_ASSERT. This makes the caller simpler, as well as
the function itself - no need to write our branches, etc.

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-3-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Print a message if /dev/kvm is missing

If a KVM selftest is run on a machine without /dev/kvm, it will exit
silently. Make it easy to tell what's happening by printing an error
message.

Opportunistically consolidate all codepaths that open /dev/kvm into a
single function so they all print the same message.

This slightly changes the semantics of vm_is_unrestricted_guest() by
changing a TEST_ASSERT() to exit(KSFT_SKIP). However
vm_is_unrestricted_guest() is only called in one place
(x86_64/mmio_warning_test.c) and that is to determine if the test should
be skipped or not.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210511202120.1371800-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: trivial comment/logging fixes

Some trivial fixes I found while touching related code in this series,
factored out into a separate commit for easier reviewing:

- s/gor/got/ and add a newline in demand_paging_test.c
- s/backing_src/src_type/ in a comment to be consistent with the real
function signature in kvm_util.c

Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Message-Id: <20210519200339.829146-2-axelrasmussen@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Fix hang in hardware_disable_test

If /dev/kvm is not available then hardware_disable_test will hang
indefinitely because the child process exits before posting to the
semaphore for which the parent is waiting.

Fix this by making the parent periodically check if the child has
exited. We have to be careful to forward the child's exit status to
preserve a KSFT_SKIP status.

I considered just checking for /dev/kvm before creating the child
process, but there are so many other reasons why the child could exit
early that it seemed better to handle that as general case.

Tested:

$ ./hardware_disable_test
/dev/kvm not available, skipping test
$ echo $?
4
$ modprobe kvm_intel
$ ./hardware_disable_test
$ echo $?
0

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210514230521.2608768-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Ignore CPUID.0DH.1H in get_cpuid_test

Similar to CPUID.0DH.0H this entry depends on the vCPU's XCR0 register
and IA32_XSS MSR. Since this test does not control for either before
assigning the vCPU's CPUID, these entries will not necessarily match
the supported CPUID exposed by KVM.

This fixes get_cpuid_test on Cascade Lake CPUs.

Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210519211345.3944063-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()

vm_get_max_gfn() casts vm->max_gfn from a uint64_t to an unsigned int,
which causes the upper 32-bits of the max_gfn to get truncated.

Nobody noticed until now likely because vm_get_max_gfn() is only used
as a mechanism to create a memslot in an unused region of the guest
physical address space (the top), and the top of the 32-bit physical
address space was always good enough.

This fix reveals a bug in memslot_modification_stress_test which was
trying to create a dummy memslot past the end of guest physical memory.
Fix that by moving the dummy memslot lower.

Fixes: 52200d0d944e ("KVM: selftests: Remove duplicate guest mode handling")
Reviewed-by: Venkatesh Srinivas <venkateshs@chromium.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210521173828.1180619-1-dmatlack@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: add a memslot-related performance benchmark

This benchmark contains the following tests:
* Map test, where the host unmaps guest memory while the guest writes to
it (maps it).

The test is designed in a way to make the unmap operation on the host
take a negligible amount of time in comparison with the mapping
operation in the guest.

The test area is actually split in two: the first half is being mapped
by the guest while the second half in being unmapped by the host.
Then a guest <-> host sync happens and the areas are reversed.

* Unmap test which is broadly similar to the above map test, but it is
designed in an opposite way: to make the mapping operation in the guest
take a negligible amount of time in comparison with the unmap operation
on the host.
This test is available in two variants: with per-page unmap operation
or a chunked one (using 2 MiB chunk size).

* Move active area test which involves moving the last (highest gfn)
memslot a bit back and forth on the host while the guest is
concurrently writing around the area being moved (including over the
moved memslot).

* Move inactive area test which is similar to the previous move active
area test, but now guest writes all happen outside of the area being
moved.

* Read / write test in which the guest writes to the beginning of each
page of the test area while the host writes to the middle of each such
page.
Then each side checks the values the other side has written.
This particular test is not expected to give different results depending
on particular memslots implementation, it is meant as a rough sanity
check and to provide insight on the spread of test results expected.

Each test performs its operation in a loop until a test period ends
(this is 5 seconds by default, but it is configurable).
Then the total count of loops done is divided by the actual elapsed
time to give the test result.

The tests have a configurable memslot cap with the "-s" test option, by
default the system maximum is used.
Each test is repeated a particular number of times (by default 20
times), the best result achieved is printed.

The test memory area is divided equally between memslots, the reminder
is added to the last memslot.
The test area size does not depend on the number of memslots in use.

The tests also measure the time that it took to add all these memslots.
The best result from the tests that use the whole test area is printed
after all the requested tests are done.

In general, these tests are designed to use as much memory as possible
(within reason) while still doing 100+ loops even on high memslot counts
with the default test length.
Increasing the test runtime makes it increasingly more likely that some
event will happen on the system during the test run, which might lower
the test result.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <8d31bb3d92bc8fa33a9756fa802ee14266ab994e.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM: selftests: Keep track of memslots more efficiently

The KVM selftest framework was using a simple list for keeping track of
the memslots currently in use.
This resulted in lookups and adding a single memslot being O(n), the
later due to linear scanning of the existing memslot set to check for
the presence of any conflicting entries.

Before this change, benchmarking high count of memslots was more or less
impossible as pretty much all the benchmark time was spent in the
selftest framework code.

We can simply use a rbtree for keeping track of both of gfn and hva.
We don't need an interval tree for hva here as we can't have overlapping
memslots because we allocate a completely new memory chunk for each new
memslot.

Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <b12749d47ee860468240cf027412c91b76dbe3db.1618253574.git.maciej.szmigiero@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: fix potential issue with ELF loading

vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs
may not be continuous if same memslot is used for data and page table allocation.

kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs)
because it does not try to read file data page by page. Fix this mismatch
by allocating memory in one step.

Reported-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

selftests: kvm: make allocation of extra memory take effect

The extra memory pages is missed to be allocated during VM creating.
perf_test_util and kvm_page_table_test use it to alloc extra memory
currently.

Fix it by adding extra_mem_pages to the total memory calculation before
allocate.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20210512043107.30076-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>