Max Gurtovoy [Tue, 20 Mar 2018 12:20:41 +0000 (14:20 +0200)]
nvmet: move device_uuid configfs attr definition to suitable place
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nitzan Carmi [Tue, 20 Mar 2018 11:07:30 +0000 (11:07 +0000)]
nvme: Add .stop_ctrl to nvme ctrl ops
For consistancy reasons, any fabric-specific works
(e.g error recovery/reconnect) should be canceled in
nvme_stop_ctrl, as for all other NVMe pending works
(e.g. scan, keep alive).
The patch aims to simplify the logic of the code, as
we now only rely on a vague demand from any fabric
to flush its private workqueues at the beginning of
.delete_ctrl op.
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nitzan Carmi [Tue, 20 Mar 2018 11:07:29 +0000 (11:07 +0000)]
nvme-rdma: Allow DELETING state change failure in error_recovery
While error recovery is ongoing, it is OK to move
ctrl to DELETING state (from concurrent delete_work).
Thus we don't need a warning for that case.
Signed-off-by: Nitzan Carmi <nitzanc@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Mon, 19 Mar 2018 16:53:50 +0000 (10:53 -0600)]
nvme: Skip checking heads without namespaces
If a task is holding a reference to a namespace on a removed controller,
the head will not be released. If the same controller is added again
later, its namespaces may not be successfully added. Instead, the user
will see kernel message "Duplicate IDs for nsid <X>".
This patch fixes that by skipping heads that don't have namespaces when
considering if a new namespace is safe to add.
Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Cc: stable@vger.kernel.org
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Wed, 28 Feb 2018 11:12:39 +0000 (13:12 +0200)]
nvme-rdma: Don't flush delete_wq by default during remove_one
The .remove_one function is called for any ib_device removal.
In case the removed device has no reference in our driver, there
is no need to flush the work queue.
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Wed, 28 Feb 2018 11:12:38 +0000 (13:12 +0200)]
nvmet-rdma: Don't flush system_wq by default during remove_one
The .remove_one function is called for any ib_device removal.
In case the removed device has no reference in our driver, there
is no need to flush the system work queue.
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Wed, 14 Mar 2018 10:22:45 +0000 (10:22 +0000)]
nvmet-rdma: Fix use after free in nvmet_rdma_cm_handler()
We free nvmet rdma queues while handling rdma_cm events.
In order to avoid this we destroy the qp and the queue after destroying
the cm_id which guarantees that all rdma_cm events are done.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Israel Rukshin [Wed, 14 Mar 2018 10:22:44 +0000 (10:22 +0000)]
nvmet-rdma: Remove unused queue state
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Wed, 28 Feb 2018 22:49:11 +0000 (14:49 -0800)]
nvmet_fc: prevent new io rqsts in possible isr completions
When a bio completion calls back into the transport for a
back-end io device, the request completion path can free
the transport io job structure allowing it to be reused for
other operations. The transport has a defer_rcv queue which
holds temporary cmd rcv ops while waitng for io job structures.
when the job frees, if there's a cmd waiting, it is picked up
and submitted for processing, which can call back out to the
bio path if it's a read. Unfortunately, what is unknown is the
context of the original bio done call, and it may be in a state
(softirq) that is not compatible with submitting the new bio in
the same calling sequence. This is especially true when using
scsi back-end devices as scsi is in softirq when it makes the
done call.
Correct by scheduling the io to be started via workq rather
than calling the start new io path inline to the original bio
done path.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Tue, 6 Mar 2018 04:55:49 +0000 (20:55 -0800)]
nvme_fc: on remoteport reuse, set new nport_id and role.
When reattaching to a removed remoteport that has not yet been
fully deleted as it's waiting for reconnect timeouts, be sure to
re-set the ports nport id and role.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Wed, 28 Feb 2018 22:49:10 +0000 (14:49 -0800)]
nvme_fc: fix abort race on teardown with lld reject
Another abort race: An io request is started, becomes active,
and is attempted to be started with the lldd. At the same time
the controller is stopped/torndown and an itterator is run to
abort the ios. As the io is active, it is added to the outstanding
aborted io count. However on the original io request thread, the
driver ends up rejecting the io due to the condition that induced
the controller teardown. The driver reject path didn't check whether
it was in the outstanding io count. This left the count outstanding
stopping controller teardown.
Correct by, in the driver reject case, setting the state to
inactive and checking whether it was in the outstanding io count.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Mon, 12 Mar 2018 16:32:22 +0000 (09:32 -0700)]
nvme_fc: io timeout should defer abort to ctrl reset
The current nvme_fc code, when an io times out, will abort the io
on the fc link, then call the error recovery routine to reset the
controller. It is during the reset of the controller that the
transport will wait for all ios to be aborted before sending a
Disconnect LS to the target.
However, the reset routine only waits for the io which it generates
the abort for to complete. Any io that was aborted just prior to the
reset isn't in it's list to wait for. Thus the Disconnect is getting
sent before the aborts have completed.
Correct by removing the abort in the timeout handler. The reset will
generate the abort. At that point the timeout handler can be simplified
to request the reset (via the error handler) and restart the timeout
timer.
Also fixes a small typo in a comment in the reset handler.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
James Smart [Tue, 13 Mar 2018 16:48:07 +0000 (09:48 -0700)]
nvme_fc: fix ctrl create failures racing with workq items
If there are errors during initial controller create, the transport
will teardown the partially initialized controller struct and free
the ctlr memory. Trouble is - most of those errors can occur due
to asynchronous events happening such io timeouts and subsystem
connectivity failures. Those failures invoke async workq items to
reset the controller and attempt reconnect. Those may be in progress
as the main thread frees the ctrl memory, resulting in NULL ptr oops.
Prevent this from happening by having the main ctrl failure thread
changing state to DELETING followed by synchronously cancelling any
pending queued work item. The change of state will prevent the
scheduling of resets or reconnect events.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jarosław Janik [Sun, 11 Mar 2018 18:51:56 +0000 (19:51 +0100)]
nvme-pci: disable APST for Samsung NVMe SSD 960 EVO + ASUS PRIME Z370-A
Yet another "incompatible" Samsung NVMe SSD 960 EVO and Asus motherboard
combination. 960 EVO device disappears from PCIe bus within few minutes
after boot-up when APST is in use and never gets back. Forcing
NVME_QUIRK_NO_APST is the only way to make this drive work with this
particular motherboard. NVME_QUIRK_NO_DEEPEST_PS doesn't work, upgrading
motherboard's BIOS didn't help either.
Since this is a desktop motherboard, the only drawback of not using APST
is increased device temperature.
Signed-off-by: Jarosław Janik <jaroslaw.janik@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Max Gurtovoy [Sun, 11 Mar 2018 15:46:06 +0000 (17:46 +0200)]
nvme: centralize ctrl removal prints
nvme_delete_ctrl can be called from various contexts in parallel,
and cause duplicated information prints, even though the specific
context doesn't perform the actual removal. Instead, print the
information when the actual removal occurs.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keith Busch [Thu, 8 Mar 2018 21:50:32 +0000 (14:50 -0700)]
nvme-pci: Add .get_address ctrl callback
The nvme-fabrics exports the controller address to sysfs, and we'd
like to have parity with this feature for PCIe. This patch provides
the appropiate callback and returns the controller address as the pci
domain:bus:device.function.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Matias Bjørling [Mon, 26 Feb 2018 12:55:40 +0000 (13:55 +0100)]
nvme: implement log page low/high offset and dwords
NVMe 1.2.1 extends the get log page interface to include 64 bit
offset and increases the number of dwords to 32 bits. Implement
for future use.
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jianchao Wang [Mon, 12 Feb 2018 12:54:46 +0000 (20:54 +0800)]
nvme: change namespaces_mutext to namespaces_rwsem
namespaces_mutext is used to synchronize the operations on ctrl
namespaces list. Most of the time, it is a read operation.
On the other hand, there are many interfaces in nvme core that
need this lock, such as nvme_wait_freeze, and even more interfaces
will be added. If we use mutex here, circular dependency could be
introduced easily. For example:
context A context B
nvme_xxx nvme_xxx
hold namespaces_mutext require namespaces_mutext
sync context B
So it is better to change it from mutex to rwsem.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jianchao Wang [Mon, 12 Feb 2018 12:54:44 +0000 (20:54 +0800)]
nvme: fix the dangerous reference of namespaces list
nvme_remove_namespaces and nvme_remove_invalid_namespaces reference
the ctrl->namespaces list w/o holding namespaces_mutext. It is ok
to invoke nvme_ns_remove there, but what if there is others.
To be safer, reference the ctrl->namespaces list under
namespaces_mutext.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jianchao Wang [Mon, 12 Feb 2018 12:57:24 +0000 (20:57 +0800)]
nvme-pci: quiesce IO queues prior to disabling device HMB accesses
Quiesce IO queues prior to disabling device HMB accesses. A controller
using HMB may relay on it to efficiently complete IO commands.
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Tai [Thu, 8 Feb 2018 18:38:30 +0000 (13:38 -0500)]
Documentation: nvme: Documentation for nvme fault injection
Add examples to show how to use nvme fault injection.
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Signed-off-by: Karl Volz <karl.volz@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Thomas Tai [Thu, 8 Feb 2018 18:38:29 +0000 (13:38 -0500)]
nvme: Add fault injection feature
Linux's fault injection framework provides a systematic way to support
error injection via debugfs in the /sys/kernel/debug directory. This
patch uses the framework to add error injection to NVMe driver. The
fault injection source code is stored in a separate file and only linked
if CONFIG_FAULT_INJECTION_DEBUG_FS kernel config is selected.
Once the error injection is enabled, NVME_SC_INVALID_OPCODE with no
retry will be injected into the nvme_end_request. Users can change
the default status code and no retry flag via debufs. Following example
shows how to enable and inject an error. For more examples, refer to
Documentation/fault-injection/nvme-fault-injection.txt
How to enable nvme fault injection:
First, enable CONFIG_FAULT_INJECTION_DEBUG_FS kernel config,
recompile the kernel. After booting up the kernel, do the
following.
How to inject an error:
mount /dev/nvme0n1 /mnt
echo 1 > /sys/kernel/debug/nvme0n1/fault_inject/times
echo 100 > /sys/kernel/debug/nvme0n1/fault_inject/probability
cp a.file /mnt
Expected Result:
cp: cannot stat ‘/mnt/a.file’: Input/output error
Message from dmesg:
FAULT_INJECTION: forcing a failure.
name fault_inject, interval 1, probability 100, space 0, times 1
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc8+ #2
Hardware name: innotek GmbH VirtualBox/VirtualBox,
BIOS VirtualBox 12/01/2006
Call Trace:
<IRQ>
dump_stack+0x5c/0x7d
should_fail+0x148/0x170
nvme_should_fail+0x2f/0x50 [nvme_core]
nvme_process_cq+0xe7/0x1d0 [nvme]
nvme_irq+0x1e/0x40 [nvme]
__handle_irq_event_percpu+0x3a/0x190
handle_irq_event_percpu+0x30/0x70
handle_irq_event+0x36/0x60
handle_fasteoi_irq+0x78/0x120
handle_irq+0xa7/0x130
? tick_irq_enter+0xa8/0xc0
do_IRQ+0x43/0xc0
common_interrupt+0xa2/0xa2
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
RSP: 0018:
ffffffff82003e90 EFLAGS:
00000246 ORIG_RAX:
ffffffffffffffdd
RAX:
ffffffff817a10c0 RBX:
ffffffff82012480 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
0000000000000000 R08:
000000008e38ce64 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffffffff82012480
R13:
ffffffff82012480 R14:
0000000000000000 R15:
0000000000000000
? __sched_text_end+0x4/0x4
default_idle+0x18/0xf0
do_idle+0x150/0x1d0
cpu_startup_entry+0x6f/0x80
start_kernel+0x4c4/0x4e4
? set_init_arg+0x55/0x55
secondary_startup_64+0xa5/0xb0
print_req_error: I/O error, dev nvme0n1, sector 9240
EXT4-fs error (device nvme0n1): ext4_find_entry:1436:
inode #2: comm cp: reading directory lblock 0
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Reviewed-by: Eric Saint-Etienne <eric.saint.etienne@oracle.com>
Signed-off-by: Karl Volz <karl.volz@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Minwoo Im [Thu, 8 Feb 2018 13:56:31 +0000 (22:56 +0900)]
nvme: use define instead of magic value for identify size
NVME_IDENTIFY_DATA_SIZE was added to linux/nvme.h by following commit.
commit
0add5e8e588c ("nvmet: use NVME_IDENTIFY_DATA_SIZE")
Make it use NVME_IDENTIFY_DATA_SIZE define instead of magic value
0x1000 in case of identify data size.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Thu, 25 Jan 2018 11:56:46 +0000 (13:56 +0200)]
iscsi-target: use common inet_addr_is_any
Instead of open-coding it.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: target-devel@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Wed, 24 Jan 2018 18:27:10 +0000 (20:27 +0200)]
nvmet: don't return "any" ip address in discovery log page
Its perfectly valid to assign a nvmet port to listen on "any"
IP address (traddr 0.0.0.0 for ipv4 address family) for IP based
transport ports. However, we must not return this address in
discovery log entries. Instead we need to return the address
where the request was accepted on (req->port address).
Since this is nvme transport specific, introduce an optional
.disc_traddr interface that is designed to check that a
port in question is bound to "any" IP address and if so, set
the traddr from the port where the request came from.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sagi Grimberg [Wed, 24 Jan 2018 18:24:24 +0000 (20:24 +0200)]
net/utils: Introduce inet_addr_is_any
Can be useful to check INET_ANY address for both ipv4/ipv6 addresses.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Shawn Lin [Thu, 22 Mar 2018 10:56:16 +0000 (18:56 +0800)]
mmc: block: Delete gendisk before cleaning up the request queue
dd if=/dev/urandom of=/dev/mmcblk1 bs=4k count=10000
with a SD card hotplug during transfer reports a warning below
introduced by commit
a063057d7c73 ("block: Fix a race between
request queue removal and the block cgroup controller"). So we
should now remove the disk, partition and bdi sysfs attributes
before cleaning up the request queue associated with the disk.
[ 410.331226] mmc1: card 59b4 removed
[ 410.348583] WARNING: CPU: 0 PID: 5 at block/blk-core.c:785
blk_cleanup_queue+0x138/0x140
[ 410.349294] Modules linked in:
[ 410.349570] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted
4.16.0-rc6-next-
20180321-00004-gc2ad6a7 #263
[ 410.350363] Hardware name: Excavator-RK3399 Board (DT)
[ 410.350819] Workqueue: events_freezable mmc_rescan
[ 410.351242] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 410.351663] pc : blk_cleanup_queue+0x138/0x140
[ 410.352054] lr : blk_cleanup_queue+0xac/0x140
[ 410.352436] sp :
ffff0000092cbb90
[ 410.352727] x29:
ffff0000092cbb90 x28:
0000000000000000
[ 410.353195] x27:
ffff8000f6f23030 x26:
ffff00000904e610
[ 410.353662] x25:
ffff8000f17cc808 x24:
ffff8000f1038200
[ 410.354128] x23:
0000000000000060 x22:
0000000000000000
[ 410.354595] x21:
ffff8000f11748d8 x20:
ffff8000f1038200
[ 410.355061] x19:
ffff8000f1174200 x18:
0000ffff936347d8
[ 410.355528] x17:
0000ffff935b93c0 x16:
ffff0000081263f8
[ 410.355994] x15:
0000000000000000 x14:
0000000000000400
[ 410.356461] x13:
0000000000000001 x12:
0000000000000001
[ 410.356927] x11:
0000000000000040 x10:
ffff8000f2400028
[ 410.357393] x9 :
ffff8000f2400040 x8 :
0000000000000000
[ 410.357860] x7 :
ffff8000f6f3a340 x6 :
ffff8000f6f3a340
[ 410.358326] x5 :
ffff8000f2400000 x4 :
ffff8000f6f3a340
[ 410.358792] x3 :
0000000000000000 x2 :
39c1333e45670800
[ 410.359259] x1 :
0000000000000000 x0 :
0000000000000003
[ 410.359726] Call trace:
[ 410.359943] blk_cleanup_queue+0x138/0x140
[ 410.360305] mmc_cleanup_queue+0x2c/0x48
[ 410.360652] mmc_blk_remove_req+0x1c/0x98
[ 410.361005] mmc_blk_remove+0x180/0x1c0
[ 410.361343] mmc_bus_remove+0x1c/0x28
[ 410.361670] device_release_driver_internal+0x154/0x1f0
[ 410.362128] device_release_driver+0x14/0x20
[ 410.362504] bus_remove_device+0xc8/0x108
[ 410.362858] device_del+0x120/0x350
[ 410.363167] mmc_remove_card+0x5c/0xb8
[ 410.363498] mmc_sd_detect+0x40/0x78
[ 410.363813] mmc_rescan+0x19c/0x368
[ 410.364123] process_one_work+0x1ac/0x318
[ 410.364477] worker_thread+0x50/0x450
[ 410.364801] kthread+0xf8/0x128
[ 410.365081] ret_from_fork+0x10/0x18
[ 410.365395] ---[ end trace
268e87a46c28968c ]---
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Wed, 21 Mar 2018 16:49:29 +0000 (12:49 -0400)]
Fix slab name "biovec-(1<<(21-12))"
I'm getting a slab named "biovec-(1<<(21-12))". It is caused by unintended
expansion of the macro BIO_MAX_PAGES. This patch renames it to biovec-max.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mikulas Patocka [Wed, 21 Mar 2018 16:42:25 +0000 (12:42 -0400)]
block: use 32-bit blk_status_t on Alpha
Early alpha processors cannot write a single byte or word; they read 8
bytes, modify the value in registers and write back 8 bytes.
The type blk_status_t is defined as one byte, it is often written
asynchronously by I/O completion routines, this asynchronous modification
can corrupt content of nearby bytes if these nearby bytes can be written
simultaneously by another CPU.
- one example of such corruption is the structure dm_io where
"blk_status_t status" is written by an asynchronous completion routine
and "atomic_t io_count" is modified synchronously
- another example is the structure dm_buffer where "unsigned hold_count"
is modified synchronously from process context and "blk_status_t
write_error" is modified asynchronously from bio completion routine
This patch fixes the bug by changing the type blk_status_t to 32 bits if
we are on Alpha and if we are compiling for a processor that doesn't have
the byte-word-extension.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 18:46:13 +0000 (11:46 -0700)]
block: Change a rcu_read_{lock,unlock}_sched() pair into rcu_read_{lock,unlock}()
scsi_device_quiesce() uses synchronize_rcu() to guarantee that the
effect of blk_set_preempt_only() will be visible for percpu_ref_tryget()
calls that occur after the queue unfreeze by using the approach
explained in https://lwn.net/Articles/573497/. The rcu read lock and
unlock calls in blk_queue_enter() form a pair with the synchronize_rcu()
call in scsi_device_quiesce(). Both scsi_device_quiesce() and
blk_queue_enter() must either use regular RCU or RCU-sched.
Since neither the RCU-protected code in blk_queue_enter() nor
blk_queue_usage_counter_release() sleeps, regular RCU protection
is sufficient. Note: scsi_device_quiesce() does not have to be
modified since it already uses synchronize_rcu().
Reported-by: Tejun Heo <tj@kernel.org>
Fixes:
3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: stable@vger.kernel.org # v4.15
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:33 +0000 (17:36 -0700)]
bcache: Fix a compiler warning in bcache_device_init()
Avoid that building with W=1 triggers the following compiler warning:
drivers/md/bcache/super.c:776:20: warning: comparison is always false due to limited range of data type [-Wtype-limits]
d->nr_stripes > SIZE_MAX / sizeof(atomic_t)) {
^
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:32 +0000 (17:36 -0700)]
bcache: Reduce the number of sparse complaints about lock imbalances
Add more annotations for sparse to inform it about which functions do
not have the same number of spin_lock() and spin_unlock() calls.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:31 +0000 (17:36 -0700)]
bcache: Suppress more warnings about set-but-not-used variables
This patch does not change any functionality.
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:30 +0000 (17:36 -0700)]
bcache: Remove an unused variable
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:29 +0000 (17:36 -0700)]
bcache: Fix kernel-doc warnings
Avoid that building with W=1 triggers warnings about the kernel-doc
headers.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:28 +0000 (17:36 -0700)]
bcache: Annotate switch fall-through
This patch avoids that building with W=1 triggers complaints about
switch fall-throughs.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:27 +0000 (17:36 -0700)]
bcache: Add __printf annotation to __bch_check_keys()
Make it possible for the compiler to verify the consistency of the
format string passed to __bch_check_keys() and the arguments that
should be formatted according to that format string.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Mon, 19 Mar 2018 00:36:26 +0000 (17:36 -0700)]
bcache: Fix indentation
This patch avoids that smatch complains about inconsistent indentation.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:25 +0000 (17:36 -0700)]
bcache: add io_disable to struct cached_dev
If a bcache device is configured to writeback mode, current code does not
handle write I/O errors on backing devices properly.
In writeback mode, write request is written to cache device, and
latter being flushed to backing device. If I/O failed when writing from
cache device to the backing device, bcache code just ignores the error and
upper layer code is NOT noticed that the backing device is broken.
This patch tries to handle backing device failure like how the cache device
failure is handled,
- Add a error counter 'io_errors' and error limit 'error_limit' in struct
cached_dev. Add another io_disable to struct cached_dev to disable I/Os
on the problematic backing device.
- When I/O error happens on backing device, increase io_errors counter. And
if io_errors reaches error_limit, set cache_dev->io_disable to true, and
stop the bcache device.
The result is, if backing device is broken of disconnected, and I/O errors
reach its error limit, backing device will be disabled and the associated
bcache device will be removed from system.
Changelog:
v2: remove "bcache: " prefix in pr_error(), and use correct name string to
print out bcache device gendisk name.
v1: indeed this is new added in v2 patch set.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:24 +0000 (17:36 -0700)]
bcache: add backing_request_endio() for bi_end_io
In order to catch I/O error of backing device, a separate bi_end_io
call back is required. Then a per backing device counter can record I/O
errors number and retire the backing device if the counter reaches a
per backing device I/O error limit.
This patch adds backing_request_endio() to bcache backing device I/O code
path, this is a preparation for further complicated backing device failure
handling. So far there is no real code logic change, I make this change a
separate patch to make sure it is stable and reliable for further work.
Changelog:
v2: Fix code comments typo, remove a redundant bch_writeback_add() line
added in v4 patch set.
v1: indeed this is new added in this patch set.
[mlyle: truncated commit subject]
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Chengguang Xu [Mon, 19 Mar 2018 00:36:23 +0000 (17:36 -0700)]
bcache: move closure debug file into debug directory
In current code closure debug file is outside of debug directory
and when unloading module there is lack of removing operation
for closure debug file, so it will cause creating error when trying
to reload module.
This patch move closure debug file into "bcache" debug direcory
so that the file can get deleted properly.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tang Junhui [Mon, 19 Mar 2018 00:36:22 +0000 (17:36 -0700)]
bcache: fix using of loop variable in memory shrink
In bch_mca_scan(), There are some confusion and logical error in the use of
loop variables. In this patch, we clarify them as:
1) nr: the number of btree nodes needs to scan, which will decrease after
we scan a btree node, and should not be less than 0;
2) i: the number of btree nodes have scanned, includes both
btree_cache_freeable and btree_cache, which should not be bigger than
btree_cache_used;
3) freed: the number of btree nodes have freed.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tang Junhui [Mon, 19 Mar 2018 00:36:21 +0000 (17:36 -0700)]
bcache: fix error return value in memory shrink
In bch_mca_scan(), the return value should not be the number of freed btree
nodes, but the number of pages of freed btree nodes.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tang Junhui [Mon, 19 Mar 2018 00:36:20 +0000 (17:36 -0700)]
bcache: fix incorrect sysfs output value of strip size
Stripe size is shown as zero when no strip in back end device:
[root@ceph132 ~]# cat /sys/block/sdd/bcache/stripe_size
0.0k
Actually it should be 1T Bytes (1 << 31 sectors), but in sysfs
interface, stripe_size was changed from sectors to bytes, and move
9 bits left, so the 32 bits variable overflows.
This patch change the variable to a 64 bits type before moving bits.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tang Junhui [Mon, 19 Mar 2018 00:36:19 +0000 (17:36 -0700)]
bcache: fix inaccurate io state for detached bcache devices
When we run IO in a detached device, and run iostat to shows IO status,
normally it will show like bellow (Omitted some fields):
Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util
sdd ... 15.89 0.53 1.82 0.20 2.23 1.81 52.30
bcache0 ... 15.89 115.42 0.00 0.00 0.00 2.40 69.60
but after IO stopped, there are still very big avgqu-sz and %util
values as bellow:
Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util
bcache0 ... 0 5326.32 0.00 0.00 0.00 0.00 100.10
The reason for this issue is that, only generic_start_io_acct() called
and no generic_end_io_acct() called for detached device in
cached_dev_make_request(). See the code:
//start generic_start_io_acct()
generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0);
if (cached_dev_get(dc)) {
//will callback generic_end_io_acct()
}
else {
//will not call generic_end_io_acct()
}
This patch calls generic_end_io_acct() in the end of IO for detached
devices, so we can show IO state correctly.
(Modified to use GFP_NOIO in kzalloc() by Coly Li)
Changelog:
v2: fix typo.
v1: the initial version.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:18 +0000 (17:36 -0700)]
bcache: add stop_when_cache_set_failed option to backing device
When there are too many I/O errors on cache device, current bcache code
will retire the whole cache set, and detach all bcache devices. But the
detached bcache devices are not stopped, which is problematic when bcache
is in writeback mode.
If the retired cache set has dirty data of backing devices, continue
writing to bcache device will write to backing device directly. If the
LBA of write request has a dirty version cached on cache device, next time
when the cache device is re-registered and backing device re-attached to
it again, the stale dirty data on cache device will be written to backing
device, and overwrite latest directly written data. This situation causes
a quite data corruption.
But we cannot simply stop all attached bcache devices when the cache set is
broken or disconnected. For example, use bcache to accelerate performance
of an email service. In such workload, if cache device is broken but no
dirty data lost, keep the bcache device alive and permit email service
continue to access user data might be a better solution for the cache
device failure.
Nix <nix@esperi.org.uk> points out the issue and provides the above example
to explain why it might be necessary to not stop bcache device for broken
cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant
suggestion to provide "always" and "auto" options to per-cached device
sysfs file stop_when_cache_set_failed. If cache set is retiring and the
backing device has no dirty data on cache, it should be safe to keep the
bcache device alive. In this case, if stop_when_cache_set_failed is set to
"auto", the device failure handling code will not stop this bcache device
and permit application to access the backing device with a unattached
bcache device.
Changelog:
[mlyle: edited to not break string constants across lines]
v3: fix typos pointed out by Nix.
v2: change option values of stop_when_cache_set_failed from 1/0 to
"auto"/"always".
v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1
(always stop).
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Cc: Nix <nix@esperi.org.uk>
Cc: Pavel Goran <via-bcache@pvgoran.name>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:17 +0000 (17:36 -0700)]
bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags
When too many I/Os failed on cache device, bch_cache_set_error() is called
in the error handling code path to retire whole problematic cache set. If
new I/O requests continue to come and take refcount dc->count, the cache
set won't be retired immediately, this is a problem.
Further more, there are several kernel thread and self-armed kernel work
may still running after bch_cache_set_error() is called. It needs to wait
quite a while for them to stop, or they won't stop at all. They also
prevent the cache set from being retired.
The solution in this patch is, to add per cache set flag to disable I/O
request on this cache and all attached backing devices. Then new coming I/O
requests can be rejected in *_make_request() before taking refcount, kernel
threads and self-armed kernel worker can stop very fast when flags bit
CACHE_SET_IO_DISABLE is set.
Because bcache also do internal I/Os for writeback, garbage collection,
bucket allocation, journaling, this kind of I/O should be disabled after
bch_cache_set_error() is called. So closure_bio_submit() is modified to
check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set,
closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and
return, generic_make_request() won't be called.
A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit
from cache_set->flags, to disable or enable cache set I/O for debugging. It
is helpful to trigger more corner case issues for failed cache device.
Changelog
v4, add wait_for_kthread_stop(), and call it before exits writeback and gc
kernel threads.
v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index.
remove "bcache: " prefix when printing out kernel message.
v2, more changes by previous review,
- Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui.
- Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this
is reported and inspired from origal patch of Pavel Vazharov.
v1, initial version.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Pavel Vazharov <freakpv@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:16 +0000 (17:36 -0700)]
bcache: stop dc->writeback_rate_update properly
struct delayed_work writeback_rate_update in struct cache_dev is a delayed
worker to call function update_writeback_rate() in period (the interval is
defined by dc->writeback_rate_update_seconds).
When a metadate I/O error happens on cache device, bcache error handling
routine bch_cache_set_error() will call bch_cache_set_unregister() to
retire whole cache set. On the unregister code path, this delayed work is
stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update).
dc->writeback_rate_update is a special delayed work from others in bcache.
In its routine update_writeback_rate(), this delayed work is re-armed
itself. That means when cancel_delayed_work_sync() returns, this delayed
work can still be executed after several seconds defined by
dc->writeback_rate_update_seconds.
The problem is, after cancel_delayed_work_sync() returns, the cache set
unregister code path will continue and release memory of struct cache set.
Then the delayed work is scheduled to run, __update_writeback_rate()
will reference the already released cache_set memory, and trigger a NULL
pointer deference fault.
This patch introduces two more bcache device flags,
- BCACHE_DEV_WB_RUNNING
bit set: bcache device is in writeback mode and running, it is OK for
dc->writeback_rate_update to re-arm itself.
bit clear:bcache device is trying to stop dc->writeback_rate_update,
this delayed work should not re-arm itself and quit.
- BCACHE_DEV_RATE_DW_RUNNING
bit set: routine update_writeback_rate() is executing.
bit clear: routine update_writeback_rate() quits.
This patch also adds a function cancel_writeback_rate_update_dwork() to
wait for dc->writeback_rate_update quits before cancel it by calling
cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected
quit dc->writeback_rate_update, after time_out seconds this function will
give up and continue to call cancel_delayed_work_sync().
And here I explain how this patch stops self re-armed delayed work properly
with the above stuffs.
update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning
and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling
cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING.
Before calling cancel_delayed_work_sync() wait utill flag
BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling
cancel_delayed_work_sync(), dc->writeback_rate_update must be already re-
armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases
delayed work routine update_writeback_rate() won't be executed after
cancel_delayed_work_sync() returns.
Inside update_writeback_rate() before calling schedule_delayed_work(), flag
BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means
someone is about to stop the delayed work. Because flag
BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync()
has to wait for this flag to be cleared, we don't need to worry about race
condition here.
If update_writeback_rate() is scheduled to run after checking
BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync()
in cancel_writeback_rate_update_dwork(), it is also safe. Because at this
moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned
previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear
and quit immediately.
Because there are more dependences inside update_writeback_rate() to struct
cache_set memory, dc->writeback_rate_update is not a simple self re-arm
delayed work. After trying many different methods (e.g. hold dc->count, or
use locks), this is the only way I can find which works to properly stop
dc->writeback_rate_update delayed work.
Changelog:
v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING
to bit index, for test_bit().
v2: Try to fix the race issue which is pointed out by Junhui.
v1: The initial version for review
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:15 +0000 (17:36 -0700)]
bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set
In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()",
cached_dev_get() is called when creating dc->writeback_thread, and
cached_dev_put() is called when exiting dc->writeback_thread. This
modification works well unless people detach the bcache device manually by
'echo 1 > /sys/block/bcache<N>/bcache/detach'
Because this sysfs interface only calls bch_cached_dev_detach() which wakes
up dc->writeback_thread but does not stop it. The reason is, before patch
"bcache: fix cached_dev->count usage for bch_cache_set_error()", inside
bch_writeback_thread(), if cache is not dirty after writeback,
cached_dev_put() will be called here. And in cached_dev_make_request() when
a new write request makes cache from clean to dirty, cached_dev_get() will
be called there. Since we don't operate dc->count in these locations,
refcount d->count cannot be dropped after cache becomes clean, and
cached_dev_detach_finish() won't be called to detach bcache device.
This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is
set inside bch_writeback_thread(). If this bit is set and cache is clean
(no existing writeback_keys), break the while-loop, call cached_dev_put()
and quit the writeback thread.
Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the
writeback thread should continue to perform writeback, this is the original
design of manually detach.
It is safe to do the following check without locking, let me explain why,
+ if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) &&
+ (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) {
If the kenrel thread does not sleep and continue to run due to conditions
are not updated in time on the running CPU core, it just consumes more CPU
cycles and has no hurt. This should-sleep-but-run is safe here. We just
focus on the should-run-but-sleep condition, which means the writeback
thread goes to sleep in mistake while it should continue to run.
1, First of all, no matter the writeback thread is hung or not,
kthread_stop() from cached_dev_detach_finish() will wake up it and
terminate by making kthread_should_stop() return true. And in normal
run time, bit on index BCACHE_DEV_DETACHING is always cleared, the
condition
!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)
is always true and can be ignored as constant value.
2, If one of the following conditions is true, the writeback thread should
go to sleep,
"!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)"
each of them independently controls the writeback thread should sleep or
not, let's analyse them one by one.
2.1 condition "!atomic_read(&dc->has_dirty)"
If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will
call bch_writeback_queue() immediately or call bch_writeback_add() which
indirectly calls bch_writeback_queue() too. In bch_writeback_queue(),
wake_up_process(dc->writeback_thread) is called. It sets writeback
thread's task state to TASK_RUNNING and following an implicit memory
barrier, then tries to wake up the writeback thread.
In writeback thread, its task state is set to TASK_INTERRUPTIBLE before
doing the condition check. If other CPU core sets the TASK_RUNNING state
after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread
will be scheduled to run very soon because its state is not
TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before
writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier
of wake_up_process() will make sure modification of dc->has_dirty on
other CPU core is updated and observed on the CPU core of writeback
thread. Therefore the condition check will correctly be false, and
continue writeback code without sleeping.
2.2 condition "!dc->writeback_running)"
dc->writeback_running can be changed via sysfs file, every time it is
modified, a following bch_writeback_queue() is alwasy called. So the
change is always observed on the CPU core of writeback thread. If
dc->writeback_running is changed from 0 to 1 on other CPU core, this
condition check will observe the modification and allow writeback
thread to continue to run without sleeping.
Now we can see, even without a locking protection, multiple conditions
check is safe here, no deadlock or process hang up will happen.
I compose a separte patch because that patch "bcache: fix cached_dev->count
usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes
Reinecke. Also this fix is not trivial and good for a separate patch.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Huijun Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Mon, 19 Mar 2018 00:36:14 +0000 (17:36 -0700)]
bcache: fix cached_dev->count usage for bch_cache_set_error()
When bcache metadata I/O fails, bcache will call bch_cache_set_error()
to retire the whole cache set. The expected behavior to retire a cache
set is to unregister the cache set, and unregister all backing device
attached to this cache set, then remove sysfs entries of the cache set
and all attached backing devices, finally release memory of structs
cache_set, cache, cached_dev and bcache_device.
In my testing when journal I/O failure triggered by disconnected cache
device, sometimes the cache set cannot be retired, and its sysfs
entry /sys/fs/bcache/<uuid> still exits and the backing device also
references it. This is not expected behavior.
When metadata I/O failes, the call senquence to retire whole cache set is,
bch_cache_set_error()
bch_cache_set_unregister()
bch_cache_set_stop()
__cache_set_unregister() <- called as callback by calling
clousre_queue(&c->caching)
cache_set_flush() <- called as a callback when refcount
of cache_set->caching is 0
cache_set_free() <- called as a callback when refcount
of catch_set->cl is 0
bch_cache_set_release() <- called as a callback when refcount
of catch_set->kobj is 0
I find if kernel thread bch_writeback_thread() quits while-loop when
kthread_should_stop() is true and searched_full_index is false, clousre
callback cache_set_flush() set by continue_at() will never be called. The
result is, bcache fails to retire whole cache set.
cache_set_flush() will be called when refcount of closure c->caching is 0,
and in function bcache_device_detach() refcount of closure c->caching is
released to 0 by clousre_put(). In metadata error code path, function
bcache_device_detach() is called by cached_dev_detach_finish(). This is a
callback routine being called when cached_dev->count is 0. This refcount
is decreased by cached_dev_put().
The above dependence indicates, cache_set_flush() will be called when
refcount of cache_set->cl is 0, and refcount of cache_set->cl to be 0
when refcount of cache_dev->count is 0.
The reason why sometimes cache_dev->count is not 0 (when metadata I/O fails
and bch_cache_set_error() called) is, in bch_writeback_thread(), refcount
of cache_dev is not decreased properly.
In bch_writeback_thread(), cached_dev_put() is called only when
searched_full_index is true and cached_dev->writeback_keys is empty, a.k.a
there is no dirty data on cache. In most of run time it is correct, but
when bch_writeback_thread() quits the while-loop while cache is still
dirty, current code forget to call cached_dev_put() before this kernel
thread exits. This is why sometimes cache_set_flush() is not executed and
cache set fails to be retired.
The reason to call cached_dev_put() in bch_writeback_rate() is, when the
cache device changes from clean to dirty, cached_dev_get() is called, to
make sure during writeback operatiions both backing and cache devices
won't be released.
Adding following code in bch_writeback_thread() does not work,
static int bch_writeback_thread(void *arg)
}
+ if (atomic_read(&dc->has_dirty))
+ cached_dev_put()
+
return 0;
}
because writeback kernel thread can be waken up and start via sysfs entry:
echo 1 > /sys/block/bcache<N>/bcache/writeback_running
It is difficult to check whether backing device is dirty without race and
extra lock. So the above modification will introduce potential refcount
underflow in some conditions.
The correct fix is, to take cached dev refcount when creating the kernel
thread, and put it before the kernel thread exits. Then bcache does not
need to take a cached dev refcount when cache turns from clean to dirty,
or to put a cached dev refcount when cache turns from ditry to clean. The
writeback kernel thread is alwasy safe to reference data structure from
cache set, cache and cached device (because a refcount of cache device is
taken for it already), and no matter the kernel thread is stopped by I/O
errors or system reboot, cached_dev->count can always be used correctly.
The patch is simple, but understanding how it works is quite complicated.
Changelog:
v2: set dc->writeback_thread to NULL in this patch, as suggested by Hannes.
v1: initial version for review.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Wed, 14 Mar 2018 15:56:53 +0000 (16:56 +0100)]
block: bio_check_eod() needs to consider partitions
bio_check_eod() should check partition size not the whole disk if
bio->bi_partno is non-zero. Do this by moving the call
to bio_check_eod() into blk_partition_remap().
Based on an earlier patch from Jiufei Xue.
Fixes:
74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 14 Mar 2018 22:48:06 +0000 (15:48 -0700)]
block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into <linux/blkdev.h>
It happens often while I'm preparing a patch for a block driver that
I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT
available for this driver? Do I have to introduce definitions of these
constants before I can use these constants? To avoid this confusion,
move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the
<linux/blkdev.h> header file such that these become available for all
block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h
header file conditional to avoid that including that header file after
<linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE
redefinition.
Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have
not been removed from uapi header files nor from NAND drivers in
which these constants are used for another purpose than converting
block layer offsets and sizes into a number of sectors.
Cc: David S. Miller <davem@davemloft.net>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Fri, 16 Mar 2018 17:31:11 +0000 (10:31 -0700)]
blk-mq-debugfs: Show more request state information
Since commit
634f9e4631a8 ("blk-mq: remove REQ_ATOM_COMPLETE usages
from blk-mq") blk_rq_is_complete() only reports whether or not a
request has completed for legacy queues. Hence modify the
blk-mq-debugfs code such that it shows the blk-mq request state
again.
Fixes:
634f9e4631a8 ("blk-mq: remove REQ_ATOM_COMPLETE usages from blk-mq")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Joseph Qi [Fri, 16 Mar 2018 06:51:27 +0000 (14:51 +0800)]
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir()
We've triggered a WARNING in blk_throtl_bio() when throttling writeback
io, which complains blkg->refcnt is already 0 when calling blkg_get(),
and then kernel crashes with invalid page request.
After investigating this issue, we've found it is caused by a race
between blkcg_bio_issue_check() and cgroup_rmdir(), which is described
below:
writeback kworker cgroup_rmdir
cgroup_destroy_locked
kill_css
css_killed_ref_fn
css_killed_work_fn
offline_css
blkcg_css_offline
blkcg_bio_issue_check
rcu_read_lock
blkg_lookup
spin_trylock(q->queue_lock)
blkg_destroy
spin_unlock(q->queue_lock)
blk_throtl_bio
spin_lock_irq(q->queue_lock)
...
spin_unlock_irq(q->queue_lock)
rcu_read_unlock
Since rcu can only prevent blkg from releasing when it is being used,
the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule
blkg release.
Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING.
And then the corresponding blkg_put() will schedule blkg release again,
which result in double free.
This race is introduced by commit
ae1188963611 ("blkcg: consolidate blkg
creation in blkcg_bio_issue_check()"). Before this commit, it will
lookup first and then try to lookup/create again with queue_lock. Since
revive this logic is a bit drastic, so fix it by only offlining pd during
blkcg_css_offline(), and move the rest destruction (especially
blkg_put()) into blkcg_css_free(), which should be the right way as
discussed.
Fixes:
ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()")
Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jonas Rabenstein [Wed, 7 Mar 2018 16:55:56 +0000 (17:55 +0100)]
block: sed-opal: fix u64 short atom length
The length must be given as bytes and not as 4 bit tuples.
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 13 Mar 2018 16:28:41 +0000 (17:28 +0100)]
bsg: split handling of SCSI CDBs vs transport requeues
The current BSG design tries to shoe-horn the transport-specific
passthrough commands into the overall framework for SCSI passthrough
requests. This has a couple problems:
- each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag
despite not dealing with SCSI commands at all. Because of that these
queues could also incorrectly accept SCSI commands from in-kernel
users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl.
- the real SCSI bsg queues also incorrectly accept bsg requests of the
BSG_SUB_PROTOCOL_SCSI_TRANSPORT type
- the bsg transport code is almost unredable because it tries to reuse
different SCSI concepts for its own purpose.
This patch instead adds a new bsg_ops structure to handle the two cases
differently, and thus solves all of the above problems. Another side
effect is that the bsg-lib queues also don't need to embedd a
struct scsi_request anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 13 Mar 2018 16:28:40 +0000 (17:28 +0100)]
bsg-lib: remove bsg_job.req
Users of the bsg-lib interface should only use the bsg_job data structure
and not know about implementation details of it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 13 Mar 2018 16:28:39 +0000 (17:28 +0100)]
bsg-lib: introduce a timeout field in struct bsg_job
The zfcp driver wants to know the timeout for a bsg job, so add a field
to struct bsg_job for it in preparation of not exposing the request
to the bsg-lib users.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nikolay Borisov [Fri, 23 Feb 2018 11:45:29 +0000 (13:45 +0200)]
direct-io: Remove unused DIO_SKIP_DIO_COUNT logic
This flag was added by
fe0f07d08ee3 ("direct-io: only inc/deci
inode->i_dio_count for file systems") as means to optimise the atomic
modificaiton of the variable for blockdevices. However with the advent
of
542ff7bf18c6 ("block: new direct I/O implementation") it became
unused. So let's remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nikolay Borisov [Fri, 23 Feb 2018 11:45:28 +0000 (13:45 +0200)]
direct-io: Remove unused DIO_ASYNC_EXTEND flag
This flag was added by
6039257378e4 ("direct-io: add flag to allow aio
writes beyond i_size") to support XFS. However, with the rework of
XFS' DIO's path to use iomap in
acdda3aae146 ("xfs: use iomap_dio_rw")
it became redundant. So let's remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ross Zwisler [Fri, 9 Mar 2018 16:38:26 +0000 (09:38 -0700)]
MAINTAINERS: add coverage for drivers/block
To help folks like me that use scripts/get_maintainer.pl.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 23:28:50 +0000 (15:28 -0800)]
block: Suppress kernel-doc warnings triggered by blk-zoned.c
Avoid that building with W=1 causes the kernel-doc tool to complain
about undocumented function arguments for the blk-zoned.c source file.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Maurizio Lombardi [Fri, 9 Mar 2018 12:59:06 +0000 (13:59 +0100)]
cdrom: do not call check_disk_change() inside cdrom_open()
when mounting an ISO filesystem sometimes (very rarely)
the system hangs because of a race condition between two tasks.
PID: 6766 TASK:
ffff88007b2a6dd0 CPU: 0 COMMAND: "mount"
#0 [
ffff880078447ae0] __schedule at
ffffffff8168d605
#1 [
ffff880078447b48] schedule_preempt_disabled at
ffffffff8168ed49
#2 [
ffff880078447b58] __mutex_lock_slowpath at
ffffffff8168c995
#3 [
ffff880078447bb8] mutex_lock at
ffffffff8168bdef
#4 [
ffff880078447bd0] sr_block_ioctl at
ffffffffa00b6818 [sr_mod]
#5 [
ffff880078447c10] blkdev_ioctl at
ffffffff812fea50
#6 [
ffff880078447c70] ioctl_by_bdev at
ffffffff8123a8b3
#7 [
ffff880078447c90] isofs_fill_super at
ffffffffa04fb1e1 [isofs]
#8 [
ffff880078447da8] mount_bdev at
ffffffff81202570
#9 [
ffff880078447e18] isofs_mount at
ffffffffa04f9828 [isofs]
#10 [
ffff880078447e28] mount_fs at
ffffffff81202d09
#11 [
ffff880078447e70] vfs_kern_mount at
ffffffff8121ea8f
#12 [
ffff880078447ea8] do_mount at
ffffffff81220fee
#13 [
ffff880078447f28] sys_mount at
ffffffff812218d6
#14 [
ffff880078447f80] system_call_fastpath at
ffffffff81698c49
RIP:
00007fd9ea914e9a RSP:
00007ffd5d9bf648 RFLAGS:
00010246
RAX:
00000000000000a5 RBX:
ffffffff81698c49 RCX:
0000000000000010
RDX:
00007fd9ec2bc210 RSI:
00007fd9ec2bc290 RDI:
00007fd9ec2bcf30
RBP:
0000000000000000 R8:
0000000000000000 R9:
0000000000000010
R10:
00000000c0ed0001 R11:
0000000000000206 R12:
00007fd9ec2bc040
R13:
00007fd9eb6b2380 R14:
00007fd9ec2bc210 R15:
00007fd9ec2bcf30
ORIG_RAX:
00000000000000a5 CS: 0033 SS: 002b
This task was trying to mount the cdrom. It allocated and configured a
super_block struct and owned the write-lock for the super_block->s_umount
rwsem. While exclusively owning the s_umount lock, it called
sr_block_ioctl and waited to acquire the global sr_mutex lock.
PID: 6785 TASK:
ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd"
#0 [
ffff880078417898] __schedule at
ffffffff8168d605
#1 [
ffff880078417900] schedule at
ffffffff8168dc59
#2 [
ffff880078417910] rwsem_down_read_failed at
ffffffff8168f605
#3 [
ffff880078417980] call_rwsem_down_read_failed at
ffffffff81328838
#4 [
ffff8800784179d0] down_read at
ffffffff8168cde0
#5 [
ffff8800784179e8] get_super at
ffffffff81201cc7
#6 [
ffff880078417a10] __invalidate_device at
ffffffff8123a8de
#7 [
ffff880078417a40] flush_disk at
ffffffff8123a94b
#8 [
ffff880078417a88] check_disk_change at
ffffffff8123ab50
#9 [
ffff880078417ab0] cdrom_open at
ffffffffa00a29e1 [cdrom]
#10 [
ffff880078417b68] sr_block_open at
ffffffffa00b6f9b [sr_mod]
#11 [
ffff880078417b98] __blkdev_get at
ffffffff8123ba86
#12 [
ffff880078417bf0] blkdev_get at
ffffffff8123bd65
#13 [
ffff880078417c78] blkdev_open at
ffffffff8123bf9b
#14 [
ffff880078417c90] do_dentry_open at
ffffffff811fc7f7
#15 [
ffff880078417cd8] vfs_open at
ffffffff811fc9cf
#16 [
ffff880078417d00] do_last at
ffffffff8120d53d
#17 [
ffff880078417db0] path_openat at
ffffffff8120e6b2
#18 [
ffff880078417e48] do_filp_open at
ffffffff8121082b
#19 [
ffff880078417f18] do_sys_open at
ffffffff811fdd33
#20 [
ffff880078417f70] sys_open at
ffffffff811fde4e
#21 [
ffff880078417f80] system_call_fastpath at
ffffffff81698c49
RIP:
00007f29438b0c20 RSP:
00007ffc76624b78 RFLAGS:
00010246
RAX:
0000000000000002 RBX:
ffffffff81698c49 RCX:
0000000000000000
RDX:
00007f2944a5fa70 RSI:
00000000000a0800 RDI:
00007f2944a5fa70
RBP:
00007f2944a5f540 R8:
0000000000000000 R9:
0000000000000020
R10:
00007f2943614c40 R11:
0000000000000246 R12:
ffffffff811fde4e
R13:
ffff880078417f78 R14:
000000000000000c R15:
00007f2944a4b010
ORIG_RAX:
0000000000000002 CS: 0033 SS: 002b
This task tried to open the cdrom device, the sr_block_open function
acquired the global sr_mutex lock. The call to check_disk_change()
then saw an event flag indicating a possible media change and tried
to flush any cached data for the device.
As part of the flush, it tried to acquire the super_block->s_umount
lock associated with the cdrom device.
This was the same super_block as created and locked by the previous task.
The first task acquires the s_umount lock and then the sr_mutex_lock;
the second task acquires the sr_mutex_lock and then the s_umount lock.
This patch fixes the issue by moving check_disk_change() out of
cdrom_open() and let the caller take care of it.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Randy Dunlap [Sun, 28 Jan 2018 00:31:45 +0000 (16:31 -0800)]
Documentation/cdrom: fix German sharp s in LaTex
Apparently the LaTex abbreviation for the German "sharp s" (ß)
(Unicode U+00DF) has changed from {\sz} to {\ss}. With {\sz},
I get this error at line 1016 (line number after another patch):
! Undefined control sequence.
l.1016 ...nel~2.0. Further thanks to Heiko Ei{\sz
}feldt,
This is fixed by changing the {\sz} to {\ss}.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Randy Dunlap [Sat, 27 Jan 2018 03:58:16 +0000 (19:58 -0800)]
Documentation/cdrom: update cdrom-standard.tex for kernel changes
Documentation updates for Documentation/cdrom/cdrom-standard.tex:
cdrom_device_ops:
- add check_events() and generic_packet()
cdrom_device_info:
- add one 'const' modifier
- correct some field descriptions
- add some missing fields
- drop 'kdev_t dev;' field
Also drop <n_discs> sentence from documentation because it is not
referenced anywhere in the kernel header or C files.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:12 +0000 (17:10 -0800)]
block: Move the queue_flag_*() functions from a public into a private header file
This patch helps to avoid that new code gets introduced in block drivers
that manipulates queue flags without holding the queue lock when that
lock should be held.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:11 +0000 (17:10 -0800)]
block: Complain if queue_flag_(set|clear)_unlocked() is abused
Since it is not safe to use queue_flag_(set|clear)_unlocked()
without holding the queue lock after the sysfs entries for a
queue have been created, complain if this happens.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:10 +0000 (17:10 -0800)]
block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()
This patch has been generated as follows:
for verb in set_unlocked clear_unlocked set clear; do
replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \
$(git grep -lw queue_flag_${verb} drivers block/bsg*)
done
Except for protecting all queue flag changes with the queue lock
this patch does not change any functionality.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:09 +0000 (17:10 -0800)]
target/tcm_loop: Use blk_queue_flag_set()
Use blk_queue_flag_set() instead of open-coding this function.
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:08 +0000 (17:10 -0800)]
iscsi: Use blk_queue_flag_set()
Use blk_queue_flag_set() instead of open-coding this function.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:07 +0000 (17:10 -0800)]
bcache: Use the blk_queue_flag_{set,clear}() functions
Use the blk_queue_flag_{set,clear}() functions instead of open-coding
these.
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:06 +0000 (17:10 -0800)]
mtip32xx: Use the blk_queue_flag_*() functions
Use the blk_queue_flag_*() functions instead of open-coding these.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:05 +0000 (17:10 -0800)]
block: Protect queue flag changes with the queue lock
Since the queue flags may be changed concurrently from multiple
contexts after a queue becomes visible in sysfs, make these changes
safe by protecting these with the queue lock.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:04 +0000 (17:10 -0800)]
block: Introduce blk_queue_flag_{set,clear,test_and_{set,clear}}()
Introduce functions that modify the queue flags and that protect
these modifications with the request queue lock. Except for moving
one wake_up_all() call from inside to outside a critical section,
this patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:03 +0000 (17:10 -0800)]
block: Use the queue_flag_*() functions instead of open-coding these
Except for changing the atomic queue flag manipulations that are
protected by the queue lock into non-atomic manipulations, this
patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Thu, 8 Mar 2018 01:10:02 +0000 (17:10 -0800)]
block: Reorder the queue flag manipulation function definitions
Move the definition of queue_flag_clear_unlocked() up and move the
definition of queue_in_flight() down such that all queue flag
manipulation function definitions become contiguous.
This patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jonas Rabenstein [Thu, 1 Mar 2018 13:26:37 +0000 (14:26 +0100)]
block: sed-opal: fix response string extraction
Tokens are prefixed by a variable length of bytes. If a bytestring is
not stored in an tiny or short atom, we have to skip more than one byte
in order to have the actual bytes not prefixed by the bytes describing
the actual length of the string.
Acked-by: Jonathan Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ming Lei [Tue, 6 Mar 2018 04:07:13 +0000 (12:07 +0800)]
block: null_blk: fix 'Invalid parameters' when loading module
On ARM64, the default page size has been 64K on some distributions, and
we should allow ARM64 people to play null_blk.
This patch fixes the issue by extend page bitmap size for supporting
other non-4KB PAGE_SIZE.
Cc: Bart Van Assche <Bart.VanAssche@wdc.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Kyungchan Koh <kkc6196@fb.com>,
Cc: weiping zhang <zhangweiping@didichuxing.com>
Cc: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Arnd Bergmann [Thu, 1 Mar 2018 10:31:29 +0000 (11:31 +0100)]
staging: rts5208: rename SG_END macro
A change to the generic scatterlist code caused a conflict with
the rtsx card reader driver:
In file included from drivers/staging/rts5208/rtsx.h:180,
from drivers/staging/rts5208/rtsx.c:28:
drivers/staging/rts5208/rtsx_chip.h:343: error: "SG_END" redefined [-Werror]
This changes one instance of the driver to prefix SG_END and
related constants.
Fixes:
723fbf563a6a ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings")
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Arnd Bergmann [Thu, 1 Mar 2018 10:31:28 +0000 (11:31 +0100)]
misc: rtsx: rename SG_END macro
A change to the generic scatterlist code caused a conflict with
the rtsx card reader driver:
In file included from drivers/misc/cardreader/rtsx_pcr.c:32:
include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror]
This changes one instance of the driver to prefix SG_END and
related constants.
Fixes:
723fbf563a6a ("lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings")
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 18:15:33 +0000 (10:15 -0800)]
block: Fix a race between request queue removal and the block cgroup controller
Avoid that the following race can occur:
blk_cleanup_queue() blkcg_print_blkgs()
spin_lock_irq(lock) (1) spin_lock_irq(blkg->q->queue_lock) (2,5)
q->queue_lock = &q->__queue_lock (3)
spin_unlock_irq(lock) (4)
spin_unlock_irq(blkg->q->queue_lock) (6)
(1) take driver lock;
(2) busy loop for driver lock;
(3) override driver lock with internal lock;
(4) unlock driver lock;
(5) can take driver lock now;
(6) but unlock internal lock.
This change is safe because only the SCSI core and the NVME core keep
a reference on a request queue after having called blk_cleanup_queue().
Neither driver accesses any of the removed data structures between its
blk_cleanup_queue() and blk_put_queue() calls.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 18:15:32 +0000 (10:15 -0800)]
block: Fix a race between the cgroup code and request queue initialization
Initialize the request queue lock earlier such that the following
race can no longer occur:
blk_init_queue_node() blkcg_print_blkgs()
blk_alloc_queue_node (1)
q->queue_lock = &q->__queue_lock (2)
blkcg_init_queue(q) (3)
spin_lock_irq(blkg->q->queue_lock) (4)
q->queue_lock = lock (5)
spin_unlock_irq(blkg->q->queue_lock) (6)
(1) allocate an uninitialized queue;
(2) initialize queue_lock to its default internal lock;
(3) initialize blkcg part of request queue, which will create blkg and
then insert it to blkg_list;
(4) traverse blkg_list and find the created blkg, and then take its
queue lock, here it is the default *internal lock*;
(5) *race window*, now queue_lock is overridden with *driver specified
lock*;
(6) now unlock *driver specified lock*, not the locked *internal lock*,
unlock balance breaks.
The changes in this patch are as follows:
- Move the .queue_lock initialization from blk_init_queue_node() into
blk_alloc_queue_node().
- Only override the .queue_lock pointer for legacy queues because it
is not useful for blk-mq queues to override this pointer.
- For all all block drivers that initialize .queue_lock explicitly,
change the blk_alloc_queue() call in the driver into a
blk_alloc_queue_node() call and remove the explicit .queue_lock
initialization. Additionally, initialize the spin lock that will
be used as queue lock earlier if necessary.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 18:15:31 +0000 (10:15 -0800)]
block: Add 'lock' as third argument to blk_alloc_queue_node()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 18:15:30 +0000 (10:15 -0800)]
zram: Delete gendisk before cleaning up the request queue
Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 18:15:29 +0000 (10:15 -0800)]
md: Delete gendisk before cleaning up the request queue
Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 18:15:28 +0000 (10:15 -0800)]
block/loop: Delete gendisk before cleaning up the request queue
Remove the disk, partition and bdi sysfs attributes before cleaning up
the request queue associated with the disk.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 28 Feb 2018 16:18:57 +0000 (09:18 -0700)]
null_blk: add 'requeue' fault attribute
Similarly to the support we have for testing/faking timeouts for
null_blk, this adds support for triggering a requeue condition.
Considering the issues around restart we've been seeing, this should be
a useful addition to the testing arsenal to ensure that we are handling
requeue conditions correctly.
This works for queue mode 1 (legacy request_fn based path) and 2 (blk-mq
path), as there's no good way to do requeue with a bio based driver.
This is similar to the timeout path. For the blk-mq path, we alternate
between passing back BLK_STS_RESOURCE and manually calling
blk_mq_requeue_request() in the driver. The former will hit the core
requeue path, while the latter exercises the IO scheduler requeue
path.
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Omar Sandoval [Wed, 28 Feb 2018 00:56:43 +0000 (16:56 -0800)]
sbitmap: use test_and_set_bit_lock()/clear_bit_unlock()
sbitmap_queue_get()/sbitmap_queue_clear() are used for
allocating/freeing a resource, so they should provide acquire/release
barrier semantics, respectively. sbitmap_get() currently contains a full
barrier, which is unnecessary, so use test_and_set_bit_lock() instead of
test_and_set_bit() (these are equivalent on x86_64). sbitmap_clear_bit()
does not imply any barriers, which is incorrect, as accesses of the
resource (e.g., request) could potentially get reordered to after the
clear_bit(). Introduce sbitmap_clear_bit_unlock() and use it for
sbitmap_queue_clear() (this only adds a compiler barrier on x86_64). The
other existing user of sbitmap_clear_bit() (the blk-mq software queue
pending map) is serialized through a spinlock and does not need this.
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Omar Sandoval [Wed, 28 Feb 2018 00:56:42 +0000 (16:56 -0800)]
block: clear ctx pending bit under ctx lock
When we insert a request, we set the software queue pending bit while
holding the software queue lock. However, we clear it outside of the
lock, so it's possible that a concurrent insert could reset the bit
after we clear it but before we empty the request list. Afterwards, the
bit would still be set but the software queue wouldn't have any requests
in it, leading us to do a spurious run in the future. This is mostly a
benign/theoretical issue, but it makes the following change easier to
justify.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 00:32:14 +0000 (16:32 -0800)]
blk-mq-debugfs: Show zone locking information
When debugging the ZBC code in the mq-deadline scheduler it is very
important to know which zones are locked and which zones are not
locked. Hence this patch that exports the zone locking information
through debugfs.
Cc: Omar Sandoval <osandov@fb.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 28 Feb 2018 00:32:13 +0000 (16:32 -0800)]
blk-mq-debugfs: Reorder queue show and store methods
Make sure that the queue show and store methods are contiguous and
also that these appear in alphabetical order.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jiufei Xue [Wed, 28 Feb 2018 05:44:18 +0000 (13:44 +0800)]
writeback: remove dead code in wb_blkcg/memcg_offline
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Anshuman Khandual [Thu, 15 Feb 2018 03:33:56 +0000 (09:03 +0530)]
lib/scatterlist: Add SG_CHAIN and SG_END macros for LSB encodings
This replaces scatterlist->page_link LSB encodings with SG_CHAIN and
SG_END definitions without any functional change.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Wed, 28 Feb 2018 19:18:58 +0000 (12:18 -0700)]
Merge branch 'for-jens' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Keith for 4.16-rc.
* 'for-jens' of git://git.infradead.org/nvme:
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
nvmet-loop: use blk_rq_payload_bytes for sgl selection
nvme-rdma: use blk_rq_payload_bytes instead of blk_rq_bytes
nvme-fabrics: don't check for non-NULL module in nvmf_register_transport
Max Gurtovoy [Wed, 24 Jan 2018 15:31:45 +0000 (17:31 +0200)]
nvmet: fix PSDT field check in command format
PSDT field section according to NVM_Express-1.3:
"This field specifies whether PRPs or SGLs are used for any data
transfer associated with the command. PRPs shall be used for all
Admin commands for NVMe over PCIe. SGLs shall be used for all Admin
and I/O commands for NVMe over Fabrics. This field shall be set to
01b for NVMe over Fabrics 1.0 implementations.
Suggested-by: Idan Burstein <idanb@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Baegjae Sung [Wed, 28 Feb 2018 07:06:04 +0000 (16:06 +0900)]
nvme-multipath: fix sysfs dangerously created links
If multipathing is enabled, each NVMe subsystem creates a head
namespace (e.g., nvme0n1) and multiple private namespaces
(e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for
private namespaces, links of head namespace are used, so the
namespace creation order must be followed (e.g., nvme0n1 ->
nvme0c1n1). If the order is not followed, links of sysfs will be
incomplete or kernel panic will occur.
The kernel panic was:
kernel BUG at fs/sysfs/symlink.c:27!
Call Trace:
nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core]
nvme_validate_ns+0x5c2/0x850 [nvme_core]
nvme_scan_work+0x1af/0x2d0 [nvme_core]
Correct order
Context A Context B
nvme0n1
nvme0c0n1 nvme0c1n1
Incorrect order
Context A Context B
nvme0c1n1
nvme0n1
nvme0c0n1
The nvme_mpath_add_disk (for creating head namespace) is called
just before the nvme_mpath_add_disk_links (for creating private
namespaces). In nvme_mpath_add_disk, the first context acquires
the lock of subsystem and creates a head namespace, and other
contexts do nothing by checking GENHD_FL_UP of a head namespace
after waiting to acquire the lock. We verified the code with or
without multipathing using three vendors of dual-port NVMe SSDs.
Signed-off-by: Baegjae Sung <baegjae@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Gustavo A. R. Silva [Mon, 12 Feb 2018 17:14:55 +0000 (11:14 -0600)]
nbd: fix return value in error handling path
It seems that the proper value to return in this particular case is the
one contained into variable new_index instead of ret.
Addresses-Coverity-ID: 1465148 ("Copy-paste error")
Fixes:
e46c7287b1c2 ("nbd: add a basic netlink interface")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tang Junhui [Tue, 27 Feb 2018 17:49:30 +0000 (09:49 -0800)]
bcache: fix kcrashes with fio in RAID5 backend dev
Kernel crashed when run fio in a RAID5 backend bcache device, the call
trace is bellow:
[ 440.012034] kernel BUG at block/blk-ioc.c:146!
[ 440.012696] invalid opcode: 0000 [#1] SMP NOPTI
[ 440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8
[ 440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16
/2015
[ 440.028615] RIP: 0010:put_io_context+0x8b/0x90
[ 440.029246] RSP: 0018:
ffffa8c882b43af8 EFLAGS:
00010246
[ 440.029990] RAX:
0000000000000000 RBX:
ffffa8c88294fca0 RCX:
0000000000
0f4240
[ 440.031006] RDX:
0000000000000004 RSI:
0000000000000286 RDI:
ffffa8c882
94fca0
[ 440.032030] RBP:
ffffa8c882b43b10 R08:
0000000000000003 R09:
ffff949cb8
0c1700
[ 440.033206] R10:
0000000000000104 R11:
000000000000b71c R12:
00000000000
01000
[ 440.034222] R13:
0000000000000000 R14:
ffff949cad84db70 R15:
ffff949cb11
bd1e0
[ 440.035239] FS:
0000000000000000(0000) GS:
ffff949cba280000(0000) knlGS:
0000000000000000
[ 440.060190] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 440.084967] CR2:
00007ff0493ef000 CR3:
00000002f1e0a002 CR4:
00000000001
606e0
[ 440.110498] Call Trace:
[ 440.135443] bio_disassociate_task+0x1b/0x60
[ 440.160355] bio_free+0x1b/0x60
[ 440.184666] bio_put+0x23/0x30
[ 440.208272] search_free+0x23/0x40 [bcache]
[ 440.231448] cached_dev_write_complete+0x31/0x70 [bcache]
[ 440.254468] closure_put+0xb6/0xd0 [bcache]
[ 440.277087] request_endio+0x30/0x40 [bcache]
[ 440.298703] bio_endio+0xa1/0x120
[ 440.319644] handle_stripe+0x418/0x2270 [raid456]
[ 440.340614] ? load_balance+0x17b/0x9c0
[ 440.360506] handle_active_stripes.isra.58+0x387/0x5a0 [raid456]
[ 440.380675] ? __release_stripe+0x15/0x20 [raid456]
[ 440.400132] raid5d+0x3ed/0x5d0 [raid456]
[ 440.419193] ? schedule+0x36/0x80
[ 440.437932] ? schedule_timeout+0x1d2/0x2f0
[ 440.456136] md_thread+0x122/0x150
[ 440.473687] ? wait_woken+0x80/0x80
[ 440.491411] kthread+0x102/0x140
[ 440.508636] ? find_pers+0x70/0x70
[ 440.524927] ? kthread_associate_blkcg+0xa0/0xa0
[ 440.541791] ret_from_fork+0x35/0x40
[ 440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2
48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b
0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41
[ 440.610020] RIP: put_io_context+0x8b/0x90 RSP:
ffffa8c882b43af8
[ 440.628575] ---[ end trace
a1fd79d85643a73e ]--
All the crash issue happened when a bypass IO coming, in such scenario
s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the
s->orig_bio by calling bio_complete(), and after that, s->iop.bio became
invalid, then kernel would crash when calling bio_put(). Maybe its upper
layer's faulty, since bio should not be freed before we calling bio_put(),
but we'd better calling bio_put() first before calling bio_complete() to
notify upper layer ending this bio.
This patch moves bio_complete() under bio_put() to avoid kernel crash.
[mlyle: fixed commit subject for character limits]
Reported-by: Matthias Ferdinand <bcache@mfedv.net>
Tested-by: Matthias Ferdinand <bcache@mfedv.net>
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Tue, 27 Feb 2018 17:49:29 +0000 (09:49 -0800)]
bcache: correct flash only vols (check all uuids)
Commit
2831231d4c3f ("bcache: reduce cache_set devices iteration by
devices_max_used") adds c->devices_max_used to reduce iteration of
c->uuids elements, this value is updated in bcache_device_attach().
But for flash only volume, when calling flash_devs_run(), the function
bcache_device_attach() is not called yet and c->devices_max_used is not
updated. The unexpected result is, the flash only volume won't be run
by flash_devs_run().
This patch fixes the issue by iterate all c->uuids elements in
flash_devs_run(). c->devices_max_used will be updated properly when
bcache_device_attach() gets called.
[mlyle: commit subject edited for character limit]
Fixes:
2831231d4c3f ("bcache: reduce cache_set devices iteration by devices_max_used")
Reported-by: Tang Junhui <tang.junhui@zte.com.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Eric Biggers [Sat, 27 Jan 2018 00:58:06 +0000 (16:58 -0800)]
blktrace_api.h: fix comment for struct blk_user_trace_setup
'struct blk_user_trace_setup' is passed to BLKTRACESETUP, not
BLKTRACESTART.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>