Andy Shevchenko [Tue, 28 Jun 2022 22:17:44 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Use bits.h macros for all masks
Currently we are using BIT(), but GENMASK(). Make use of the latter one
as well (far less error-prone, far more concise).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-8-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:43 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Drop redundant ACPI_PTR()
The driver depends on ACPI (via MFD_INTEL_PMC_BXT), ACPI_PTR() resolution
is always the same. Otherwise a compiler may produce a warning.
That said, the rule of thumb either ugly ifdeffery with ACPI_PTR or
none should be used in a driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-7-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:42 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less error prone than the
use of #ifdef based kernel configuration guards.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-6-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:41 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Extend use of temporary variable for struct device
Extend use of temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-5-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:40 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Use dev_err_probe()
Simplify the mux error path a bit by using dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-4-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:39 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Convert to use platform_get/set_drvdata()
We have the specific helpers for platform device to set and get
its driver data. Convert driver to use them instead of open coded
variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-3-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:38 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Create sysfs attributes using core driver's facility
Driver core takes care of sysfs attributes. Use this facility instead of
doing it explicitly in ->probe() and ->remove().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-2-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:17:37 +0000 (01:17 +0300)]
mfd: intel_soc_pmic_bxtwc: Don't shadow error codes in show()/store()
kstrtox() along with regmap API can return different error codes based on
circumstances.
Don't shadow them when returning to the caller.
While at it, remove rather confusing message from addr_store().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628221747.33956-1-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Tue, 28 Jun 2022 22:30:47 +0000 (01:30 +0300)]
mfd: intel-lpss: Add Intel Meteor Lake-P PCI IDs
Add Intel Meteor Lake-P LPSS PCI IDs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220628223047.34301-1-andriy.shevchenko@linux.intel.com
AngeloGioacchino Del Regno [Mon, 27 Jun 2022 12:39:54 +0000 (14:39 +0200)]
mfd: mt6397: Add basic support for MT6331+MT6332 PMIC
Add support for the MT6331 PMIC with MT6332 Companion PMIC, found
in MT6795 Helio X10 smartphone platforms.
This combo has support for multiple devices but, for a start,
only the following have been implemented:
- Regulators (two instances, one in MT6331, one in MT6332)
- RTC (MT6331)
- Keys (MT6331)
- Interrupts (MT6331 also dispatches MT6332's interrupts)
There's more to be implemented, especially for MT6332, which
will come at a later stage.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220627123954.64299-1-angelogioacchino.delregno@collabora.com
Samuel Holland [Thu, 16 Jun 2022 06:09:13 +0000 (01:09 -0500)]
mfd: axp20x: Add AXP221/AXP223/AXP809 GPIO cells
These PMICs all contain a compatible GPIO controller.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220616060915.48325-3-samuel@sholland.org
Zhang Jiaming [Thu, 23 Jun 2022 07:33:33 +0000 (15:33 +0800)]
mfd: ipaq-micro: Fix spelling mistake of "receive{d}"
Change 'receieved' to 'received' and 'recieve' to 'receive'.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220623073333.5675-1-jiaming@nfschina.com
Jiang Jian [Tue, 21 Jun 2022 10:38:39 +0000 (18:38 +0800)]
mfd: db8500-prcmu: Drop duplicated word "the" in the comments
There is an unexpected word "the" in the comments that needs to be dropped.
Line 801: * This function sets the the operating point of the ARM.
-------
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220621103839.96847-1-jiangjian@cdjrlc.com
Liu Ying [Sat, 11 Jun 2022 14:14:20 +0000 (22:14 +0800)]
dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding
This patch adds bindings for i.MX8qm/qxp Control and Status Registers module.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220611141421.718743-14-victor.liu@nxp.com
Andy Shevchenko [Thu, 16 Jun 2022 17:10:09 +0000 (20:10 +0300)]
mfd: intel_soc_pmic_chtwc: Switch from __maybe_unused to pm_sleep_ptr() etc
Letting the compiler remove these functions when the kernel is built
without CONFIG_PM_SLEEP support is simpler and less heavier for builds
than the use of __maybe_unused attributes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220616171009.43524-2-andriy.shevchenko@linux.intel.com
Andy Shevchenko [Thu, 16 Jun 2022 17:10:08 +0000 (20:10 +0300)]
mfd: intel_soc_pmic_chtwc: Use dev_err_probe()
Simplify the mux error path a bit by using dev_err_probe().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220616171009.43524-1-andriy.shevchenko@linux.intel.com
Uwe Kleine-König [Sun, 19 Jun 2022 08:26:55 +0000 (10:26 +0200)]
mfd: tc6393xb: Make disable callback return void
All implementations return 0, so simplify accordingly.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220619082655.53728-1-u.kleine-koenig@pengutronix.de
Andy Shevchenko [Fri, 17 Jun 2022 18:23:38 +0000 (21:23 +0300)]
mfd: dln2: Automatically detect and fill endpoint pointers
The usb_find_common_endpoints() finds and fills the endpoints
in accordance with their types. Use it to automatically detect
and fill endpoint pointers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220617182338.32402-1-andriy.shevchenko@linux.intel.com
AngeloGioacchino Del Regno [Fri, 17 Jun 2022 11:07:27 +0000 (13:07 +0200)]
dt-bindings: mfd: mt6397: Add compatibles for MT6331 RTC and keys
The MT6331 PMIC provides many sub modules: regulators, audio
codec, LED controller, keys, RTC and some GPIOs.
It is always paired with a MT6332 Companion PMIC, which provides
thermistors, WLEDs (display LED backlight), secondary AP cluster
regulators, modem clocks, battery charger and fuel gauge.
Add the necessary compatibles to start implementing the basics.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220617110728.90132-2-angelogioacchino.delregno@collabora.com
Satya Priya [Wed, 22 Jun 2022 05:10:38 +0000 (10:40 +0530)]
dt-bindings: mfd: qcom-pm8xxx: Update the maintainers section
Update the maintainers section with latest mail ID.
Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/1655874639-11273-2-git-send-email-quic_c_skakit@quicinc.com
Lee Jones [Tue, 21 Jun 2022 08:14:02 +0000 (09:14 +0100)]
mfd: pm8008: Remove driver data structure pm8008_data
Maintaining a local driver data structure that is never shared
outside of the core device is an unnecessary complexity. Half of the
attributes were not used outside of a single function, one of which
was not used at all. The remaining 2 are generic and can be passed
around as required.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Uwe Kleine-König [Tue, 14 Jun 2022 15:21:48 +0000 (17:21 +0200)]
mfd: twl: Remove platform data support
There is no in-tree machine that provides a struct twl4030_platform_data
since commit
e92fc4f04a34 ("ARM: OMAP2+: Drop legacy board file for
LDP"). So assume dev_get_platdata() returns NULL in twl_probe() and
simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220614152148.252820-1-u.kleine-koenig@pengutronix.de
Saravanan Sekar [Wed, 15 Jun 2022 14:53:53 +0000 (16:53 +0200)]
dt-bindings: mfd: Add mp2733 compatible
Add new compatible for mp2733 mfd driver.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220615145357.2370044-3-sravanhome@gmail.com
Krzysztof Kozlowski [Tue, 7 Jun 2022 13:34:43 +0000 (15:34 +0200)]
dt-bindings: mfd: qcom,tcsr: Add qcom,tcsr-mdm9615
Document the (already used) TCSR on MDM9615.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220607133443.182468-2-krzysztof.kozlowski@linaro.org
Krzysztof Kozlowski [Tue, 7 Jun 2022 13:34:42 +0000 (15:34 +0200)]
dt-bindings: mfd: qcom,tcsr: Convert to dtschema
Convert the Qualcomm Top Control and Status Register to DT Schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220607133443.182468-1-krzysztof.kozlowski@linaro.org
Tinghan Shen [Wed, 1 Jun 2022 11:22:01 +0000 (19:22 +0800)]
mfd: cros_ec: Add SCP Core-1 as a new CrOS EC MCU
MT8195 System Companion Processors(SCP) is a dual-core RISC-V MCU.
Add a new CrOS feature ID to represent the SCP's 2nd core.
The 1st core is referred to as 'core 0', and the 2nd core is referred
to as 'core 1'.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601112201.15510-16-tinghan.shen@mediatek.com
Fabien Parent [Tue, 31 May 2022 12:49:57 +0000 (14:49 +0200)]
mfd: mt6358-irq: Add MT6357 PMIC support
Add MT6357 PMIC IRQ support.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220531124959.202787-6-fparent@baylibre.com
Fabien Parent [Tue, 31 May 2022 12:49:56 +0000 (14:49 +0200)]
mfd: mt6397-core: Add MT6357 PMIC support
Adds support for PMIC keys, Regulator, and RTC for the MT6357 PMIC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220531124959.202787-5-fparent@baylibre.com
AngeloGioacchino Del Regno [Fri, 20 May 2022 12:40:36 +0000 (14:40 +0200)]
dt-bindings: mfd: Add compatible for MT6331 PMIC
Add a compatible for the MT6331 PMIC MFD device.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220520124039.228314-5-angelogioacchino.delregno@collabora.com
Uwe Kleine-König [Thu, 19 May 2022 16:28:37 +0000 (18:28 +0200)]
dt-bindings: mfd: stm32-timers: Document how to specify interrupts
The timer units in the stm32mp1 CPUs have interrupts, depending on the
timer flavour either one "global" or four dedicated ones. Document how
to formalize these in a device tree.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220519162838.695404-1-u.kleine-koenig@pengutronix.de
Miaoqian Lin [Wed, 1 Jun 2022 04:32:22 +0000 (08:32 +0400)]
mfd: max77620: Fix refcount leak in max77620_initialise_fps
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes:
327156c59360 ("mfd: max77620: Add core driver for MAX77620/MAX20024")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601043222.64441-1-linmq006@gmail.com
Lukas Bulwahn [Wed, 1 Jun 2022 07:35:11 +0000 (09:35 +0200)]
MAINTAINERS: Fix file entry for MAX77693 DT
Commit
b38213c6118b ("dt-bindings: mfd: maxim,max77693: Convert to
dtschema") converts max77693.txt to maxim,max77693.yaml and adjusts the
file entry in MAINTAINERS accordingly.
Unfortunately, the merge commit
afb67df31a8c ("Merge branches [...] into
ibs-for-mfd-merged") resolves some conflict in MAINTAINERS in such a way
that the file entry for the converted text file max77693.txt, removed in
the commit above, is added back into MAINTAINERS.
Remove the file entry to this converted text file in MAXIM PMIC AND MUIC
DRIVERS FOR EXYNOS BASED BOARDS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220601073511.15721-1-lukas.bulwahn@gmail.com
Andy Shevchenko [Tue, 31 May 2022 20:24:04 +0000 (23:24 +0300)]
syscon: Use %pa to format the variable of resource_size_t type
Instead of explicit casting, use %pa specifier to format
the variable of resource_size_t type.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220531202404.70282-1-andriy.shevchenko@linux.intel.com
Uwe Kleine-König [Mon, 30 May 2022 19:24:29 +0000 (21:24 +0200)]
mfd: tc6387xb: Drop disable callback that is never called
The driver never calls the disable callback, so drop the member from
the platform struct and all callbacks from the actual platform datas.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530192430.2108217-4-u.kleine-koenig@pengutronix.de
Uwe Kleine-König [Mon, 30 May 2022 19:24:28 +0000 (21:24 +0200)]
mfd: t7l66xb: Drop platform disable callback
None of the in-tree instantiations of struct t7l66xb_platform_data
provides a disable callback. So better don't dereference this function
pointer unconditionally. As there is no user, drop it completely instead
of calling it conditional.
This is a preparation for making platform remove callbacks return void.
Fixes:
1f192015ca5b ("mfd: driver for the T7L66XB TMIO SoC")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530192430.2108217-3-u.kleine-koenig@pengutronix.de
Uwe Kleine-König [Mon, 30 May 2022 19:24:27 +0000 (21:24 +0200)]
mfd: asic3: Make asic3_gpio_remove() return void
Up to now asic3_gpio_remove() returns zero unconditionally. This makes it
easier to see in the caller that there is no error to handle.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530192430.2108217-2-u.kleine-koenig@pengutronix.de
Andy Shevchenko [Mon, 30 May 2022 12:00:15 +0000 (15:00 +0300)]
MAINTAINERS: Update Intel PMIC (MFD part) to Supported
The actual status of the code is Supported.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530120015.70543-1-andriy.shevchenko@linux.intel.com
Rahul T R [Mon, 30 May 2022 10:10:29 +0000 (15:40 +0530)]
dt-bindings: mfd: ti,j721e-system-controller: Add clock property
Add a pattern property for clock-controller, also update the example
with a clock-controller node
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220530101031.11357-2-r-ravikumar@ti.com
Conor Dooley [Mon, 6 Jun 2022 20:13:43 +0000 (21:13 +0100)]
dt-bindings: mfd: Convert da9063 to yaml
Convert the dt binding for the da9063/da9063l to yaml.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220606201343.514391-4-mail@conchuod.ie
Luca Ceresoli [Fri, 3 Jun 2022 15:57:25 +0000 (17:57 +0200)]
mfd: max77714: Update Luca Ceresoli's e-mail address
My Bootlin address is preferred from now on.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220603155727.1232061-4-luca@lucaceresoli.net
Lee Jones [Tue, 19 Jul 2022 09:53:48 +0000 (10:53 +0100)]
Merge branches 'ib-mfd-acpi-for-rafael-5.20', 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-5.20' and 'ib-mfd-soc-bcm-5.20' into ibs-for-mfd-merged
Henning Schild [Mon, 6 Jun 2022 16:41:38 +0000 (19:41 +0300)]
leds: simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
On Apollo Lake the pinctrl drivers will now come up without ACPI. Use
that instead of open coding it.
Create a new driver for that which can later be filled with more GPIO
based models, and which has different dependencies.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Henning Schild [Mon, 6 Jun 2022 16:41:37 +0000 (19:41 +0300)]
platform/x86: simatic-ipc: drop custom P2SB bar code
The two drivers that used to use this have been switched over to the
common P2SB accessor, so this code is not needed any longer.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Henning Schild [Mon, 6 Jun 2022 16:41:36 +0000 (19:41 +0300)]
leds: simatic-ipc-leds: Convert to use P2SB accessor
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Henning Schild [Mon, 6 Jun 2022 16:41:35 +0000 (19:41 +0300)]
watchdog: simatic-ipc-wdt: convert to use P2SB accessor
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Andy Shevchenko [Mon, 6 Jun 2022 16:41:34 +0000 (19:41 +0300)]
EDAC, pnd2: convert to use common P2SB accessor
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Andy Shevchenko [Mon, 6 Jun 2022 16:41:33 +0000 (19:41 +0300)]
EDAC, pnd2: Use proper I/O accessors and address space annotation
The driver uses rather voodoo kind of castings and I/O accessors.
Replace it with proper __iomem annotation and readl()/readq() calls.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Andy Shevchenko [Mon, 6 Jun 2022 16:41:32 +0000 (19:41 +0300)]
i2c: i801: convert to use common P2SB accessor
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Tan Jui Nee [Mon, 6 Jun 2022 16:41:31 +0000 (19:41 +0300)]
mfd: lpc_ich: Add support for pinctrl in non-ACPI system
Add support for non-ACPI systems, such as system that uses
Advanced Boot Loader (ABL) whereby a platform device has to be created
in order to bind with pin control and GPIO.
At the moment, Intel Apollo Lake In-Vehicle Infotainment (IVI) system
requires a driver to hide and unhide P2SB to lookup P2SB BAR and pass
the PCI BAR address to GPIO.
Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Andy Shevchenko [Mon, 6 Jun 2022 16:41:30 +0000 (19:41 +0300)]
mfd: lpc_ich: Switch to generic p2sb_bar()
Instead of open coding p2sb_bar() functionality we are going to
use generic library. There is one more user en route.
This is more than just a clean-up. It also fixes a potential issue
seen when SPI BAR is 64-bit. The current code works if and only if
the PCI BAR of the hidden device is inside 4G address space. In case
when firmware decides to go above 4G, we will get a wrong address.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Andy Shevchenko [Mon, 6 Jun 2022 16:41:29 +0000 (19:41 +0300)]
mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()
Factor out duplicate code to lpc_ich_enable_spi_write() helper function.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Andy Shevchenko [Mon, 6 Jun 2022 16:41:28 +0000 (19:41 +0300)]
pinctrl: intel: Check against matching data instead of ACPI companion
In some cases we may get a platform device that has ACPI companion
which is different to the pin control described in the ACPI tables.
This is primarily happens when device is instantiated by board file.
In order to allow this device being enumerated, refactor
intel_pinctrl_get_soc_data() to check the matching data instead of
ACPI companion.
Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Jonathan Yong [Mon, 6 Jun 2022 16:41:27 +0000 (19:41 +0300)]
platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
SoC features such as GPIO are accessed via a reserved MMIO area,
we don't know its address but can obtain it from the BAR of
the P2SB device, that device is normally hidden so we have to
temporarily unhide it, read address and hide it back.
There are already a few users and at least one more is coming which
require an access to Primary to Sideband (P2SB) bridge in order
to get IO or MMIO BAR hidden by BIOS.
Create a library to access P2SB for x86 devices in a unified way.
Background information
======================
Note, the term "bridge" is used in the documentation and it has nothing
to do with a PCI (host) bridge as per the PCI specifications.
The P2SB is an interesting device by its nature and hardware design.
First of all, it has several devices in the hardware behind it. These
devices may or may not be represented as ACPI devices by a firmware.
It also has a hardwired (to 0s) the least significant bits of the
base address register which is represented by the only 64-bit BAR0.
It means that OS mustn't reallocate the BAR.
On top of that in some cases P2SB is represented by function 0 on PCI
slot (in terms of B:D.F) and according to the PCI specification any
other function can't be seen until function 0 is present and visible.
In the PCI configuration space of P2SB device the full 32-bit register
is allocated for the only purpose of hiding the entire P2SB device. As
per [3]:
3.1.39 P2SB Control (P2SBC)—Offset E0h
Hide Device (HIDE): When this bit is set, the P2SB will return 1s on
any PCI Configuration Read on IOSF-P. All other transactions including
PCI Configuration Writes on IOSF-P are unaffected by this. This does
not affect reads performed on the IOSF-SB interface.
This doesn't prevent MMIO accesses, although preventing the OS from
assigning these addresses. The firmware on the affected platforms marks
the region as unusable (by cutting it off from the PCI host bridge
resources) as depicted in the Apollo Lake example below:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
The P2SB 16MB BAR is located at 0xd0000000-0xd0ffffff memory window.
The generic solution
====================
The generic solution for all cases when we need to access to the information
behind P2SB device is a library code where users ask for necessary resources
by demand and hence those users take care of not being run on the systems
where this access is not required.
The library provides the p2sb_bar() API to retrieve the MMIO of the BAR0 of
the device from P2SB device slot.
P2SB unconditional unhiding awareness
=====================================
Technically it's possible to unhide the P2SB device and devices on
the same PCI slot and access them at any time as needed. But there are
several potential issues with that:
- the systems were never tested against such configuration and hence
nobody knows what kind of bugs it may bring, especially when we talk
about SPI NOR case which contains Intel FirmWare Image (IFWI) code
(including BIOS) and already known to be problematic in the past for
end users
- the PCI by its nature is a hotpluggable bus and in case somebody
attaches a driver to the functions of a P2SB slot device(s) the
end user experience and system behaviour can be unpredictable
- the kernel code would need some ugly hacks (or code looking as an
ugly hack) under arch/x86/pci in order to enable these devices on
only selected platforms (which may include CPU ID table followed by
a potentially growing number of DMI strings
The future improvements
=======================
The future improvements with this code may go in order to gain some kind
of cache, if it's possible at all, to prevent unhiding and hiding many
times to take static information that may be saved once per boot.
Links
=====
[1]: https://lab.whitequark.org/notes/2017-11-08/accessing-intel-ich-pch-gpios/
[2]: https://cdrdv2.intel.com/v1/dl/getContent/332690?wapkw=332690
[3]: https://cdrdv2.intel.com/v1/dl/getContent/332691?wapkw=332691
[4]: https://medium.com/@jacksonchen_43335/bios-gpio-p2sb-
70e9b829b403
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Nicolas Saenz Julienne [Sat, 25 Jun 2022 11:36:19 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Bypass power_on/off() calls
Bypass power_on/power_off() when running on BCM2711 as they are not
needed.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-12-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:18 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.
Use the fact that 'pm->rpivid_asb' is populated as a hint that we're on
BCM2711.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-11-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:17 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Resolve ASB register macros
The macros in order to access the ASB registers have a hard coded base
address. So extending them for other platforms would make them harder
to read. As a solution resolve these macros.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-10-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:16 +0000 (13:36 +0200)]
soc: bcm: bcm2835-power: Refactor ASB control
The functions to control the async AXI bridges are almost identical.
So define a general function to handle it and keep the original ones as
wrapper. This should make this driver easier to extend.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-9-stefan.wahren@i2se.com
Stefan Wahren [Sat, 25 Jun 2022 11:36:15 +0000 (13:36 +0200)]
mfd: bcm2835-pm: Add support for BCM2711
In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.
As per the devicetree bindings, BCM2711 will provide both the old and
new ASB resources, so get both of them and pass them into
'bcm2835-power,' which will take care of selecting which one to use
accordingly.
Since the RPiVid ASB's resources were being provided prior to formalizing
the bindings[1], also support the old DT files that didn't use
'reg-names.'
[1] See:
7dbe8c62ceeb ("ARM: dts: Add minimal Raspberry Pi 4 support")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-8-stefan.wahren@i2se.com
Nicolas Saenz Julienne [Sat, 25 Jun 2022 11:36:14 +0000 (13:36 +0200)]
mfd: bcm2835-pm: Use 'reg-names' to get resources
If available in firmware, find resources by their 'reg-names' position
instead of relying on hardcoded offsets. Care is taken to support old
firmware nonetheless.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220625113619.15944-7-stefan.wahren@i2se.com
Rafael J. Wysocki [Mon, 13 Jun 2022 18:31:08 +0000 (20:31 +0200)]
mfd: core: Use acpi_dev_for_each_child()
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/2726954.BEx9A2HvPv@kreacher
Linus Torvalds [Mon, 6 Jun 2022 00:18:54 +0000 (17:18 -0700)]
Linux 5.19-rc1
Linus Torvalds [Mon, 6 Jun 2022 00:14:03 +0000 (17:14 -0700)]
Merge tag 'pull-work.fd-fixes' of git://git./linux/kernel/git/viro/vfs
Pull file descriptor fix from Al Viro:
"Fix for breakage in #work.fd this window"
* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the breakage in close_fd_get_file() calling conventions change
Linus Torvalds [Mon, 6 Jun 2022 00:05:38 +0000 (17:05 -0700)]
Merge tag 'mm-hotfixes-stable-2022-06-05' of git://git./linux/kernel/git/akpm/mm
Pull mm hotfixes from Andrew Morton:
"Fixups for various recently-added and longer-term issues and a few
minor tweaks:
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
x86/kexec: fix memory leak of elf header buffer
mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
MAINTAINERS: add maintainer information for z3fold
mailmap: update Josh Poimboeuf's email
Linus Torvalds [Sun, 5 Jun 2022 23:58:27 +0000 (16:58 -0700)]
Merge tag 'mm-nonmm-stable-2022-06-05' of git://git./linux/kernel/git/akpm/mm
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
Linus Torvalds [Sun, 5 Jun 2022 18:51:48 +0000 (11:51 -0700)]
bluetooth: don't use bitmaps for random flag accesses
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit
0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes:
fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Al Viro [Sun, 5 Jun 2022 18:01:42 +0000 (14:01 -0400)]
fix the breakage in close_fd_get_file() calling conventions change
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes:
6319194ec57b ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Sun, 5 Jun 2022 18:00:43 +0000 (11:00 -0700)]
Merge tag 'x86-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
Linus Torvalds [Sun, 5 Jun 2022 17:57:35 +0000 (10:57 -0700)]
Merge tag 'x86-mm-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull x86 mm cleanup from Thomas Gleixner:
"Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"
* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
Linus Torvalds [Sun, 5 Jun 2022 17:55:23 +0000 (10:55 -0700)]
Merge tag 'x86-microcode-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
Linus Torvalds [Sun, 5 Jun 2022 17:53:41 +0000 (10:53 -0700)]
Merge tag 'x86-cleanups-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
Linus Torvalds [Sun, 5 Jun 2022 17:49:42 +0000 (10:49 -0700)]
Merge tag 'x86-boot-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull x86 boot update from Thomas Gleixner:
"Use strlcpy() instead of strscpy() in arch_setup()"
* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use strscpy() to replace deprecated strlcpy()
Linus Torvalds [Sun, 5 Jun 2022 17:47:06 +0000 (10:47 -0700)]
Merge tag 'timers-core-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
Linus Torvalds [Sun, 5 Jun 2022 17:42:40 +0000 (10:42 -0700)]
Merge tag 'sched-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Fix the fallout of sysctl code move which placed the init function
wrong"
* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/autogroup: Fix sysctl move
Linus Torvalds [Sun, 5 Jun 2022 17:40:31 +0000 (10:40 -0700)]
Merge tag 'perf-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
Linus Torvalds [Sun, 5 Jun 2022 17:39:20 +0000 (10:39 -0700)]
Merge tag 'perf-core-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull perf fixlet from Thomas Gleixner:
"Trivial indentation fix in Kconfig"
* tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/Kconfig: Fix indentation in the Kconfig file
Linus Torvalds [Sun, 5 Jun 2022 16:45:27 +0000 (09:45 -0700)]
Merge tag 'objtool-urgent-2022-06-05' of git://git./linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Linus Torvalds [Sun, 5 Jun 2022 16:25:12 +0000 (09:25 -0700)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
Linus Torvalds [Sun, 5 Jun 2022 16:12:28 +0000 (09:12 -0700)]
Merge tag 'hte/for-5.19-rc1' of git://git./linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
Linus Torvalds [Sun, 5 Jun 2022 16:06:03 +0000 (09:06 -0700)]
Merge tag 'kbuild-v5.19-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Fix build regressions for parisc, csky, nios2, openrisc
- Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT
- Remove arch/parisc/nm, which was presumably a workaround for old
tools
- Check the odd combination of EXPORT_SYMBOL and 'static' precisely
- Make external module builds robust against "too long argument error"
- Support j, k keys for moving the cursor in nconfig
* tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: Allow to select bash in a modified environment
scripts: kconfig: nconf: make nconfig accept jk keybindings
modpost: use fnmatch() to simplify match()
modpost: simplify mod->name allocation
kbuild: factor out the common objtool arguments
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
kbuild: clean .tmp_* pattern by make clean
kbuild: remove redundant cleanups in scripts/link-vmlinux.sh
kbuild: rebuild multi-object modules when objtool is updated
kbuild: add cmd_and_savecmd macro
kbuild: make *.mod rule robust against too long argument error
kbuild: make built-in.a rule robust against too long argument error
kbuild: check static EXPORT_SYMBOL* by script instead of modpost
parisc: remove arch/parisc/nm
kbuild: do not create *.prelink.o for Clang LTO or IBT
kbuild: replace $(linked-object) with CONFIG options
kbuild: do not try to parse *.cmd files for objects provided by compiler
kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost
modpost: squash if...else-if in find_elf_symbol2()
modpost: reuse ARRAY_SIZE() macro for section_mismatch()
...
Linus Torvalds [Sun, 5 Jun 2022 02:07:15 +0000 (19:07 -0700)]
Merge tag 'pull-18-rc1-work.namei' of git://git./linux/kernel/git/viro/vfs
Pull vfs pathname updates from Al Viro:
"Several cleanups in fs/namei.c"
* tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
namei: cleanup double word in comment
get rid of dead code in legitimize_root()
fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
Linus Torvalds [Sun, 5 Jun 2022 02:00:05 +0000 (19:00 -0700)]
Merge tag 'pull-18-rc1-work.mount' of git://git./linux/kernel/git/viro/vfs
Pull mount handling updates from Al Viro:
"Cleanups (and one fix) around struct mount handling.
The fix is usermode_driver.c one - once you've done kern_mount(), you
must kern_unmount(); simple mntput() will end up with a leak. Several
failure exits in there messed up that way... In practice you won't hit
those particular failure exits without fault injection, though"
* tag 'pull-18-rc1-work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move mount-related externs from fs.h to mount.h
blob_to_mnt(): kern_unmount() is needed to undo kern_mount()
m->mnt_root->d_inode->i_sb is a weird way to spell m->mnt_sb...
linux/mount.h: trim includes
uninline may_mount() and don't opencode it in fspick(2)/fsopen(2)
Linus Torvalds [Sun, 5 Jun 2022 01:52:00 +0000 (18:52 -0700)]
Merge tag 'pull-18-rc1-work.fd' of git://git./linux/kernel/git/viro/vfs
Pull file descriptor updates from Al Viro.
- Descriptor handling cleanups
* tag 'pull-18-rc1-work.fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Unify the primitives for file descriptor closing
fs: remove fget_many and fput_many interface
io_uring_enter(): don't leave f.flags uninitialized
Linus Torvalds [Sun, 5 Jun 2022 00:42:33 +0000 (17:42 -0700)]
Merge tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Nine cifs/smb3 client fixes.
Includes DFS fixes, some cleanup of leagcy SMB1 code, duplicated
message cleanup and a double free and deadlock fix"
* tag '5.19-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
cifs: skip trailing separators of prefix paths
cifs: update internal module number
cifs: version operations for smb20 unneeded when legacy support disabled
cifs: do not build smb1ops if legacy support is disabled
cifs: fix potential deadlock in direct reclaim
cifs: when extending a file with falloc we should make files not-sparse
cifs: remove repeated debug message on cifs_put_smb_ses()
cifs: fix potential double free during failed mount
Schspa Shi [Fri, 3 Jun 2022 09:38:52 +0000 (17:38 +0800)]
kbuild: Allow to select bash in a modified environment
This fixes the build error when the system has a default bash version
which is too old to support associative array variables.
The build error log as fellowing:
linux/scripts/check-local-export: line 11: declare: -A: invalid option
declare: usage: declare [-afFirtx] [-p] [name[=value] ...]
Signed-off-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Isak Ellmer [Wed, 1 Jun 2022 13:08:19 +0000 (15:08 +0200)]
scripts: kconfig: nconf: make nconfig accept jk keybindings
Make nconfig accept jk keybindings for movement in addition to arrow
keys.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 30 May 2022 09:01:39 +0000 (18:01 +0900)]
modpost: use fnmatch() to simplify match()
Replace the own implementation for wildcard (glob) matching with
a function call to fnmatch().
Also, change the return type to 'bool'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Masahiro Yamada [Mon, 30 May 2022 09:01:38 +0000 (18:01 +0900)]
modpost: simplify mod->name allocation
mod->name is set to the ELF filename with the suffix ".o" stripped.
The current code calls strdup() and free() to manipulate the string,
but a simpler approach is to pass new_module() with the name length
subtracted by 2.
Also, check if the passed filename ends with ".o" before stripping it.
The current code blindly chops the suffix:
tmp[strlen(tmp) - 2] = '\0'
It will cause buffer under-run if strlen(tmp) < 2;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Masahiro Yamada [Sat, 28 May 2022 15:47:04 +0000 (00:47 +0900)]
kbuild: factor out the common objtool arguments
scripts/Makefile.build and scripts/link-vmlinux.sh have similar setups
for the objtool arguments.
It was difficult to factor out them because all the vmlinux build rules
were written in a shell script. It is somewhat tedious to touch the two
files every time a new objtool option is supported.
To reduce the code duplication, move the objtool for vmlinux.o into
scripts/Makefile.vmlinux_o. Then, move the common macros to Makefile.lib
so they are shared between Makefile.build and Makefile.vmlinux_o.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Masahiro Yamada [Sat, 28 May 2022 15:47:03 +0000 (00:47 +0900)]
kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o
This is a preparation for moving the objtool rule in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Masahiro Yamada [Sat, 28 May 2022 15:47:02 +0000 (00:47 +0900)]
kbuild: clean .tmp_* pattern by make clean
Change the "make clean" rule to remove all the .tmp_* files.
.tmp_objdiff is the only exception, which should be removed by
"make mrproper".
Rename the record directory of objdiff, .tmp_objdiff to .objdiff to
avoid the removal by "make clean".
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Linus Torvalds [Sat, 4 Jun 2022 21:04:27 +0000 (14:04 -0700)]
Merge tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- bitmap: optimize bitmap_weight() usage, from me
- lib/bitmap.c make bitmap_print_bitmask_to_buf parseable, from Mauro
Carvalho Chehab
- include/linux/find: Fix documentation, from Anna-Maria Behnsen
- bitmap: fix conversion from/to fix-sized arrays, from me
- bitmap: Fix return values to be unsigned, from Kees Cook
It has been in linux-next for at least a week with no problems.
* tag 'bitmap-for-5.19-rc1' of https://github.com/norov/linux: (31 commits)
nodemask: Fix return values to be unsigned
bitmap: Fix return values to be unsigned
KVM: x86: hyper-v: replace bitmap_weight() with hweight64()
KVM: x86: hyper-v: fix type of valid_bank_mask
ia64: cleanup remove_siblinginfo()
drm/amd/pm: use bitmap_{from,to}_arr32 where appropriate
KVM: s390: replace bitmap_copy with bitmap_{from,to}_arr64 where appropriate
lib/bitmap: add test for bitmap_{from,to}_arr64
lib: add bitmap_{from,to}_arr64
lib/bitmap: extend comment for bitmap_(from,to)_arr32()
include/linux/find: Fix documentation
lib/bitmap.c make bitmap_print_bitmask_to_buf parseable
MAINTAINERS: add cpumask and nodemask files to BITMAP_API
arch/x86: replace nodes_weight with nodes_empty where appropriate
mm/vmstat: replace cpumask_weight with cpumask_empty where appropriate
clocksource: replace cpumask_weight with cpumask_empty in clocksource.c
genirq/affinity: replace cpumask_weight with cpumask_empty where appropriate
irq: mips: replace cpumask_weight with cpumask_empty where appropriate
drm/i915/pmu: replace cpumask_weight with cpumask_empty where appropriate
arch/x86: replace cpumask_weight with cpumask_empty where appropriate
...
Linus Torvalds [Sat, 4 Jun 2022 20:50:23 +0000 (13:50 -0700)]
Merge tag 'for-5.19/parisc-2' of git://git./linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"A fix to prevent crash at bootup if CONFIG_SCHED_MC is enabled, and
add auto-detection of primary graphics card for framebuffer driver"
* tag 'for-5.19/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/stifb: Keep track of hardware path of graphics card
parisc/stifb: Implement fb_is_primary_device()
parisc: fix a crash with multicore scheduler
Linus Torvalds [Sat, 4 Jun 2022 20:42:53 +0000 (13:42 -0700)]
Merge tag 'for-linus-5.19-rc1b-tag' of git://git./linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"Two cleanup patches for Xen related code and (more important) an
update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
down"
* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: replace xen_remap() with memremap()
MAINTAINERS: Update Xen maintainership
xen: switch gnttab_end_foreign_access() to take a struct page pointer
Linus Torvalds [Sat, 4 Jun 2022 20:33:12 +0000 (13:33 -0700)]
Merge tag 'perf-tools-for-v5.19-2022-06-04' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Synthesize task events for pre-existing threads when using 'perf lock
--threads', as we need to show task names.
- Fix unwinding with ld.lld (>= version 10.0) linked objects, where
.eh_frame_hdr and .text are in different PT_LOAD program headers,
which makes perf record --call-graph dwarf fail with such obkects.
- Check if 'perf record' hangs in the ARM SPE (Statistical Profiling
Extensions) 'perf test' entry when recording a workload with forks.
- Trace physical address for Arm SPE events, needed for 'perf c2c' to
locate the memory node for samples.
- Fix sorting in percent_rmt_hitm_cmp() in 'perf c2c'.
- Further support for Intel hybrid systems in the evlist and 'perf
record' code.
- Update IBM s/390 vendor event JSON tables.
- Add metrics (JSON) for Intel Sapphirerapids.
- Update metrics for Intel Alderlake.
- Correct typo of sysf 'event_source' directory in the documentation.
* tag 'perf-tools-for-v5.19-2022-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf vendor events intel: Update metrics for Alderlake
perf vendor events intel: Add metrics for Sapphirerapids
perf c2c: Fix sorting in percent_rmt_hitm_cmp()
perf mem: Trace physical address for Arm SPE events
perf list: Update event description for IBM zEC12/zBC12 to latest level
perf list: Update event description for IBM z196/z114 to latest level
perf list: Update event description for IBM z15 to latest level
perf list: Update event description for IBM z14 to latest level
perf list: Update event description for IBM z13 to latest level
perf list: Update event description for IBM z10 to latest level
perf list: Add IBM z16 event description for s390
perf record: Support sample-read topdown metric group for hybrid platforms
perf lock: Change to synthesize task events
perf unwind: Fix segbase for ld.lld linked objects
perf test arm-spe: Check if perf-record hangs when recording workload with forks
perf docs: Correct typo of event_sources
perf evlist: Extend arch_evsel__must_be_in_group to support hybrid systems
Steve French [Sat, 4 Jun 2022 06:18:37 +0000 (01:18 -0500)]
cifs: fix uninitialized pointer in error case in dfs_cache_get_tgt_share
Set default value of ppath to null.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Helge Deller [Thu, 2 Jun 2022 11:55:26 +0000 (13:55 +0200)]
parisc/stifb: Keep track of hardware path of graphics card
Keep the pa_path (hardware path) of the graphics card in sti_struct and use
this info to give more useful info which card is currently being used.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Helge Deller [Thu, 2 Jun 2022 11:50:44 +0000 (13:50 +0200)]
parisc/stifb: Implement fb_is_primary_device()
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Linus Torvalds [Sat, 4 Jun 2022 03:01:25 +0000 (20:01 -0700)]
Merge tag 'gpio-fixes-for-v5.19-rc1' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the correct register for regcache sync in gpio-pca953x
- remove unused and potentially harmful code from gpio-adp5588
- MAINTAINERS update
* tag 'gpio-fixes-for-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: adp5588: Remove support for platform setup and teardown callbacks
gpio: pca953x: use the correct register address to do regcache sync
MAINTAINERS: Update Intel GPIO (PMIC and PCH) to Supported
MAINTAINERS: Update GPIO ACPI library to Supported
Linus Torvalds [Sat, 4 Jun 2022 02:57:25 +0000 (19:57 -0700)]
Merge tag 'regulator-fix-v5.19-rc0' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One fix that came in during the merge window, fixing an error in the
examples in the DT binding documentation for mt6315"
* tag 'regulator-fix-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6315-regulator: fix invalid allowed mode
Linus Torvalds [Fri, 3 Jun 2022 23:57:16 +0000 (16:57 -0700)]
Merge tag 'ntfs3_for_5.19' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- fix some memory leaks and panic
- fixed xfstests (tested on x86_64): generic/092 generic/099
generic/228 generic/240 generic/307 generic/444
- fix some typos, dead code, etc
* tag 'ntfs3_for_5.19' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: provide block_invalidate_folio to fix memory leak
fs/ntfs3: Fix invalid free in log_replay
fs/ntfs3: Update valid size if -EIOCBQUEUED
fs/ntfs3: Check new size for limits
fs/ntfs3: Fix fiemap + fix shrink file size (to remove preallocated space)
fs/ntfs3: In function ntfs_set_acl_ex do not change inode->i_mode if called from function ntfs_init_acl
fs/ntfs3: Optimize locking in ntfs_save_wsl_perm
fs/ntfs3: Update i_ctime when xattr is added
fs/ntfs3: Restore ntfs_xattr_get_acl and ntfs_xattr_set_acl functions
fs/ntfs3: Keep preallocated only if option prealloc enabled
fs/ntfs3: Fix some memory leaks in an error handling path of 'log_replay()'