Joseph Myers [Tue, 22 Mar 2022 18:01:16 +0000 (18:01 +0000)]
Use Linux 5.17 in build-many-glibcs.py
This patch makes build-many-glibcs.py use Linux 5.17.
Tested with build-many-glibcs.py (host-libraries, compilers and glibcs
builds).
John David Anglin [Tue, 22 Mar 2022 17:35:54 +0000 (17:35 +0000)]
resolv: Fix unaligned accesses to fields in HEADER struct
The structure HEADER is normally aligned to a word boundary but
sometimes it needs to be accessed when aligned on a byte boundary.
This change defines a new typedef, UHEADER, with alignment 1.
It is used to ensure the fields are accessed with byte loads and
stores when necessary.
V4: Change to res_mkquery.c deleted. Small whitespace fix.
V5: Move UHEADER typedef to resolv/resolv-internal.h. Replace all
HEADER usage with UHEADER in resolv/res_send.c.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Siddhesh Poyarekar [Tue, 3 Aug 2021 15:59:23 +0000 (21:29 +0530)]
gai_init: Avoid jumping from if condition to its else counterpart
Clean up another antipattern where code flows from an if condition to
its else counterpart with a goto.
Most of the change in this patch is whitespace-only; a `git diff -b`
ought to show the actual logic changes.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Tue, 27 Jul 2021 17:19:53 +0000 (22:49 +0530)]
gaiconf_init: Refactor some bits for readability
Split out line processing for `label`, `precedence` and `scopev4` into
separate functions instead of the gotos.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Wed, 2 Mar 2022 06:15:29 +0000 (11:45 +0530)]
gethosts: Return EAI_MEMORY on allocation failure
All other cases of failures due to lack of memory return EAI_MEMORY, so
it seems wrong to return EAI_SYSTEM here. The only reason
convert_hostent_to_gaih_addrtuple could fail is on calloc failure.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 15:08:31 +0000 (20:38 +0530)]
gaih_inet: Split result generation into its own function
Simplify the loop a wee bit and clean up variable names too.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 14:54:37 +0000 (20:24 +0530)]
gaih_inet: split loopback lookup into its own function
Flatten the condition nesting and replace the alloca for RET.AT/ATR with
a single array LOCAL_AT[2]. This gets rid of alloca and alloca
accounting.
`git diff -b` is probably the best way to view this change since much of
the diff is whitespace changes.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 14:18:48 +0000 (19:48 +0530)]
gaih_inet: make gethosts into a function
The macro is quite a pain to debug, so make gethosts into a function to
make it easier to maintain.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 10:26:22 +0000 (15:56 +0530)]
gaih_inet: separate nss lookup loop into its own function
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 10:23:45 +0000 (15:53 +0530)]
gaih_inet: Split nscd lookup code into its own function.
Add a new member got_ipv6 to indicate if the results have an IPv6
result and use it instead of the local got_ipv6.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Fri, 4 Mar 2022 09:27:12 +0000 (14:57 +0530)]
gaih_inet: Split simple gethostbyname into its own function
Add a free_at flag in gaih_result to indicate if res.at needs to be
freed by the caller.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 08:38:51 +0000 (14:08 +0530)]
gaih_inet: make numeric lookup a separate routine
Introduce the gaih_result structure and general paradigm for cleanups
that follow to process the lookup request and return a result. A lookup
function (like text_to_binary_address), should return an integer error
code and set members of gaih_result based on what it finds. If the
function does not have a result and no errors have occurred during the
lookup, it should return 0 and res.at should be set to NULL, allowing a
subsequent function to do the lookup until we run out of options.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Thu, 10 Feb 2022 07:57:11 +0000 (13:27 +0530)]
gaih_inet: Simplify service resolution
Refactor the code to split out the service resolution code into a
separate function. Allocate the service tuples array just once to the
size of the typeproto array, thus avoiding the unnecessary pointer
chasing and stack allocations.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Thu, 3 Mar 2022 17:37:42 +0000 (23:07 +0530)]
getaddrinfo: Fix leak with AI_ALL [BZ #28852]
Use realloc in convert_hostent_to_gaih_addrtuple and fix up pointers in
the result list so that a single block is maintained for
hostbyname3_r/hostbyname2_r and freed in gaih_inet. This result is
never merged with any other results, since the hosts database does not
permit merging.
Resolves BZ #28852.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Mon, 7 Mar 2022 16:47:36 +0000 (22:17 +0530)]
gaih_inet: Simplify canon name resolution
Simplify logic for allocation of canon to remove the canonbuf variable;
canon now always points to an allocated block. Also pull the canon name
set into a separate function.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Siddhesh Poyarekar [Thu, 17 Mar 2022 06:14:34 +0000 (11:44 +0530)]
Simplify allocations and fix merge and continue actions [BZ #28931]
Allocations for address tuples is currently a bit confusing because of
the pointer chasing through PAT, making it hard to observe the sequence
in which allocations have been made. Narrow scope of the pointer
chasing through PAT so that it is only used where necessary.
This also tightens actions behaviour with the hosts database in
getaddrinfo to comply with the manual text. The "continue" action
discards previous results and the "merge" action results in an immedate
lookup failure. Consequently, chaining of allocations across modules is
no longer necessary, thus opening up cleanup opportunities.
A test has been added that checks some combinations to ensure that they
work correctly.
Resolves: BZ #28931
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: DJ Delorie <dj@redhat.com>
Max Gautier [Mon, 21 Mar 2022 12:25:05 +0000 (09:25 -0300)]
iconv: Add UTF-7-IMAP variant in utf-7.c
UTF-7-IMAP differs from UTF-7 in the followings ways (see RFC 3501[1]
for reference) :
- The shift character is '&' instead of '+'
- There is no "optional direct characters" and the "direct characters"
set is different
- There is no implicit shift back to US-ASCII from BASE64, all BASE64
sequences MUST be terminated with '-'
[1]: https://datatracker.ietf.org/doc/html/rfc3501#section-5.1.3
Signed-off-by: Max Gautier <mg@max.gautier.name>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Max Gautier [Mon, 21 Mar 2022 12:12:05 +0000 (09:12 -0300)]
iconv: make utf-7.c able to use variants
Add infrastructure in utf-7.c to handle variants. The approach comes from
iso646.c
The variant is defined at gconv_init time and is passed as a
supplementary variable.
Signed-off-by: Max Gautier <mg@max.gautier.name>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Max Gautier [Sun, 20 Mar 2022 16:41:05 +0000 (17:41 +0100)]
iconv: Better mapping to RFC for UTF-7
- Direct use of characters instead of arcane arrays
- isxbase64 is not the Modified BASE64 alphabet, but the characters who
needs to trigger an explicit shift back to US-ASCII. Make that clearer
Signed-off-by: Max Gautier <mg@max.gautier.name>
Reviewed-by: Adhemerval Zanellla <adhemerval.zanella@linaro.org>
Max Gautier [Thu, 9 Dec 2021 09:31:49 +0000 (10:31 +0100)]
iconv: Always encode "optional direct" UTF-7 characters
Signed-off-by: Max Gautier <mg@max.gautier.name>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Fri, 18 Mar 2022 20:27:54 +0000 (21:27 +0100)]
stdio-common: Add wide stream coverage to tst-vfprintf-user-type
And use TEST_COMPARE_STRING for the narrow tests.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Fri, 18 Mar 2022 20:27:54 +0000 (21:27 +0100)]
libio: Flush-only _IO_str_overflow must not return EOF (bug 28949)
In general, _IO_str_overflow returns the character passed as an argument
on success. However, if flush-only operation is requested by passing
EOF, returning EOF looks like an error, and the caller cannot tell
whether the operation was successful or not.
_IO_wstr_overflow had the same bug regarding WEOF.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Fri, 18 Mar 2022 20:27:54 +0000 (21:27 +0100)]
libio: Convert tst_swprintf to the test framework
And increase test coverage slightly.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Fri, 18 Mar 2022 17:18:35 +0000 (18:18 +0100)]
scripts/dso-ordering-test.py: Fix C&P error in * callrefs processing
The elf/dso-sort-tests-src subdirectory is not changed by this commit,
so it seems that the cut-and-paste error was not material.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Florian Weimer [Thu, 17 Mar 2022 09:49:07 +0000 (10:49 +0100)]
stdio-common: Generate ja_JP.EUC-JP locale
It is needed by tst-swprintf.
Florian Weimer [Thu, 17 Mar 2022 09:49:07 +0000 (10:49 +0100)]
stdio-common: Re-flow and sort Makefile variables
Siddhesh Poyarekar [Thu, 17 Mar 2022 05:46:57 +0000 (11:16 +0530)]
nss: Sort tests and tests-container and put one test per line
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
H.J. Lu [Wed, 16 Mar 2022 15:43:48 +0000 (08:43 -0700)]
benchtests: Use "=" instead of ":=" [BZ #28970]
Use "=" instead of ":=" to allow sysdeps Makefiles to add more benches
to bench and benchset. This fixes BZ #28970.
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
John David Anglin [Tue, 15 Mar 2022 23:04:39 +0000 (23:04 +0000)]
hppa: Use END instead of PSEUDO_END in swapcontext.S
John David Anglin [Tue, 15 Mar 2022 15:12:03 +0000 (15:12 +0000)]
hppa: Implement swapcontext in assembler (bug 28960)
When swapcontext.c is compiled without -g, the following error occurs:
Error: CFI instruction used without previous .cfi_startproc
Fix by converting swapcontext routine to assembler.
Steve Grubb [Fri, 11 Mar 2022 22:04:46 +0000 (17:04 -0500)]
associate a deallocator for iconv_open
This patch associates iconv_close as a deallocator for iconv_open. This
required moving the iconv_close declaration above iconv_open.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Steve Grubb [Fri, 11 Mar 2022 20:29:06 +0000 (15:29 -0500)]
associate a deallocation for opendir
This patch associates closedir as a deallocation for opendir and fdopendir.
This required moving the closedir declaration above the other 2 functions.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Steve Grubb [Fri, 11 Mar 2022 14:40:41 +0000 (09:40 -0500)]
Add access function attributes to epoll_wait
This patch adds write access function attributes to the epoll_wait family of
functions
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Steve Grubb [Thu, 10 Mar 2022 22:31:34 +0000 (17:31 -0500)]
Add access function attributes to grp and shadow headers
This patch adds access function attributes to the re-entrant functions
in grp.h and shadow headers.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Carlos O'Donell [Tue, 8 Mar 2022 19:57:29 +0000 (14:57 -0500)]
Define ISO 639-3 "tok" [BZ #28950]
Effective 2022-01-20 via SIL request 2021-043 the identifier "tok"
is now active for Toki Pona in the code set for ISO 639-3.
References:
https://iso639-3.sil.org/code/tok
https://iso639-3.sil.org/sites/iso639-3/files/change_requests/2021/2021-043.pdf
No regressions on x86_64.
Florian Weimer [Fri, 11 Mar 2022 07:23:56 +0000 (08:23 +0100)]
nss: Protect against errno changes in function lookup (bug 28953)
dlopen may clobber errno. The nss_test_errno module uses an ELF
constructor to achieve that, but there could be internal errors
during dlopen that cause this, too. Therefore, the NSS framework
has to guard against such errno clobbers.
__nss_module_get_function is currently the only function that calls
__nss_module_load, so it is sufficient to save and restore errno
around this call.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Fri, 11 Mar 2022 07:23:56 +0000 (08:23 +0100)]
nss: Do not mention NSS test modules in <gnu/lib-names.h>
They are not actually installed. Use the nss_files version instead
in nss/Makefile, similar to how __nss_shlib_revision is derived
from LIBNSS_FILES_SO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Florian Weimer [Thu, 10 Mar 2022 07:50:51 +0000 (08:50 +0100)]
malloc: Exit early on test failure in tst-realloc
This addresses more (correct) use-after-free warnings reported by
GCC 12 on some targets.
Fixes commit
c094c232eb3246154265bb035182f92fe1b17ab8 ("Avoid
-Wuse-after-free in tests [BZ #26779].").
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Steve Grubb [Thu, 10 Mar 2022 00:26:33 +0000 (05:56 +0530)]
Add some missing access function attributes
This patch adds some missing access function attributes to getrandom /
getentropy and several functions in sys/xattr.h
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
José Bollo [Tue, 8 Mar 2022 08:58:16 +0000 (09:58 +0100)]
libio: Ensure output buffer for wchars (bug #28828)
The _IO_wfile_overflow does not check if the write pointer for wide
data is valid before access, different than _IO_file_overflow. This
leads to crash on some cases, as described by bug 28828.
The minimal sequence to produce the crash was:
#include <stdio.h>
#include <wchar.h>
int main (int ac, char **av)
{
setvbuf (stdout, NULL, _IOLBF, 0);
fgetwc (stdin);
fputwc (10, stdout); /*CRASH HERE!*/
return 0;
}
The "fgetwc(stdin);" is necessary since it triggers the bug by setting
the flag _IO_CURRENTLY_PUTTING on stdout indirectly (file wfileops.c,
function _IO_wfile_underflow, line 213).
Signed-off-by: Jose Bollo <jobol@nonadev.net>
Adhemerval Zanella [Wed, 10 Nov 2021 18:32:42 +0000 (15:32 -0300)]
inet: Return EAI_MEMORY when nrl_domainname() fails to allocate memory
It aligns NI_NOFQDN with default behavior for getnameinfo().
Checked on x86_64-linux-gnu.
Adhemerval Zanella [Wed, 10 Nov 2021 18:26:52 +0000 (15:26 -0300)]
inet: Remove strdupa from nrl_domainname()
We can use the already in place scratch_buffer.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Adhemerval Zanella [Wed, 10 Nov 2021 17:40:30 +0000 (14:40 -0300)]
inet: Fix getnameinfo (NI_NOFQDN) race condition (BZ#28566)
The 'not_first' is accessed on nrl_domainname() in a non atomically
way, although it is only updated after the lock is taken.
This patch fix the double-checked locking by using acquire-release
atomic operation instead of plain load and by moving the 'not_first'
store only after 'domain' is actually set.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Su Lifan [Fri, 25 Feb 2022 08:58:07 +0000 (16:58 +0800)]
benchtests: make compare_strings.py accept string as attribute value
Commit
ac759b1fbf28a82d99afde9046f8b72c7cba5dae added attribute
"overlap" to bench-memmove-walk, whose value is a string. This change
makes compare_strings.py fail since benchout_strings.schema.json
requires the values of attributes to be number.
This patch relaxes such constraint.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_d_tanh8_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_d_tanh4_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_d_tanh2_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_s_tanhf8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_s_tanhf4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_s_tanhf16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_d_tan8_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_d_tan4_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_d_tan2_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_s_tanf8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:15 +0000 (10:47 -0800)]
x86_64: Fix svml_s_tanf4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_tanf16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_sinh8_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_sinh4_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_sinh2_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_sinhf8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_sinhf4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_sinhf16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log28_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log24_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log22_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log2f8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log2f4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log2f16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log1p8_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log1p4_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log1p2_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log1pf8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:14 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log1pf4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log1pf16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log108_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log104_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_log102_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log10f8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log10f4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_log10f16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_hypot8_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_hypot4_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_hypot2_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_hypotf8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_hypotf4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_hypotf16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_expm18_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_expm14_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_d_expm12_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_expm1f8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_expm1f4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:13 +0000 (10:47 -0800)]
x86_64: Fix svml_s_expm1f16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_d_exp28_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_d_exp24_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_d_exp22_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_s_exp2f8_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_s_exp2f4_core_sse4.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_s_exp2f16_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_d_exp108_core_avx512.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Sunil K Pandey [Mon, 7 Mar 2022 18:47:12 +0000 (10:47 -0800)]
x86_64: Fix svml_d_exp104_core_avx2.S code formatting
This commit contains following formatting changes
1. Instructions proceeded by a tab.
2. Instruction less than 8 characters in length have a tab
between it and the first operand.
3. Instruction greater than 7 characters in length have a
space between it and the first operand.
4. Tabs after `#define`d names and their value.
5. 8 space at the beginning of line replaced by tab.
6. Indent comments with code.
7. Remove redundent .text section.
8. 1 space between line content and line comment.
9. Space after all commas.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>