Denis Bolotin [Mon, 19 Nov 2018 14:28:31 +0000 (16:28 +0200)]
qed: Fix QM getters to always return a valid pq
[ Upstream commit
eb62cca9bee842e5b23bd0ddfb1f271ca95e8759 ]
The getter callers doesn't know the valid Physical Queues (PQ) values.
This patch makes sure that a valid PQ will always be returned.
The patch consists of 3 fixes:
- When qed_init_qm_get_idx_from_flags() receives a disabled flag, it
returned PQ 0, which can potentially be another function's pq. Verify
that flag is enabled, otherwise return default start_pq.
- When qed_init_qm_get_idx_from_flags() receives an unknown flag, it
returned NULL and could lead to a segmentation fault. Return default
start_pq instead.
- A modulo operation was added to MCOS/VFS PQ getters to make sure the
PQ returned is in range of the required flag.
Fixes:
b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Bolotin [Mon, 19 Nov 2018 14:28:30 +0000 (16:28 +0200)]
qed: Fix bitmap_weight() check
[ Upstream commit
276d43f0ae963312c0cd0e2b9a85fd11ac65dfcc ]
Fix the condition which verifies that only one flag is set. The API
bitmap_weight() should receive size in bits instead of bytes.
Fixes:
b5a9ee7cf3be ("qed: Revise QM cofiguration")
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thor Thayer [Fri, 16 Nov 2018 14:25:49 +0000 (08:25 -0600)]
mtd: spi-nor: Fix Cadence QSPI page fault kernel panic
[ Upstream commit
a6a66f80c85e8e20573ca03fabf32445954a88d5 ]
The current Cadence QSPI driver caused a kernel panic sporadically
when writing to QSPI. The problem was caused by writing more bytes
than needed because the QSPI operated on 4 bytes at a time.
<snip>
[ 11.202044] Unable to handle kernel paging request at virtual address
bffd3000
[ 11.209254] pgd =
e463054d
[ 11.211948] [
bffd3000] *pgd=
2fffb811, *pte=
00000000, *ppte=
00000000
[ 11.218202] Internal error: Oops: 7 [#1] SMP ARM
[ 11.222797] Modules linked in:
[ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-
d0c45cd44a8f
[ 11.235796] Hardware name: Altera SOCFPGA Arria10
[ 11.240487] PC is at __raw_writesl+0x70/0xd4
[ 11.244741] LR is at cqspi_write+0x1a0/0x2cc
</snip>
On a page boundary limit the number of bytes copied from the tx buffer
to remain within the page.
This patch uses a temporary buffer to hold the 4 bytes to write and then
copies only the bytes required from the tx buffer.
Reported-by: Adrian Amborzewicz <adrian.ambrozewicz@intel.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kai-Heng Feng [Wed, 14 Nov 2018 05:35:20 +0000 (05:35 +0000)]
HID: multitouch: Add pointstick support for Cirque Touchpad
[ Upstream commit
12d43aacf9a74d0eb66fd0ea54ebeb79ca28940f ]
Cirque Touchpad/Pointstick combo is similar to Alps devices, it requires
MT_CLS_WIN_8_DUAL to expose its pointstick as a mouse.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olof Johansson [Sat, 17 Nov 2018 03:43:27 +0000 (19:43 -0800)]
mtd: rawnand: qcom: Namespace prefix some commands
[ Upstream commit
33bf5519ae5dd356b182a94e3622f42860274a38 ]
PAGE_READ is used by RISC-V arch code included through mm headers,
and it makes sense to bring in a prefix on these in the driver.
drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined
#define PAGE_READ 0x2
In file included from include/linux/memremap.h:7,
from include/linux/mm.h:27,
from include/linux/scatterlist.h:8,
from include/linux/dma-mapping.h:11,
from drivers/mtd/nand/raw/qcom_nandc.c:17:
arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition
Caught by riscv allmodconfig.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Thu, 8 Nov 2018 16:52:53 +0000 (17:52 +0100)]
gpio: mockup: fix indicated direction
[ Upstream commit
bff466bac59994cfcceabe4d0be5fdc1c20cd5b8 ]
Commit
3edfb7bd76bd ("gpiolib: Show correct direction from the
beginning") fixed an existing issue but broke libgpiod tests by
changing the default direction of dummy lines to output.
We don't break user-space so make gpio-mockup behave as before.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aya Levin [Thu, 15 Nov 2018 16:05:15 +0000 (18:05 +0200)]
net/mlx4: Fix UBSAN warning of signed integer overflow
[ Upstream commit
a463146e67c848cbab5ce706d6528281b7cded08 ]
UBSAN: Undefined behavior in
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:626:29
signed integer overflow:
1802201963 +
1802201963 cannot be represented
in type 'int'
The union of res_reserved and res_port_rsvd[MLX4_MAX_PORTS] monitors
granting of reserved resources. The grant operation is calculated and
protected, thus both members of the union cannot be negative. Changed
type of res_reserved and of res_port_rsvd[MLX4_MAX_PORTS] from signed
int to unsigned int, allowing large value.
Fixes:
5a0d0a6161ae ("mlx4: Structures and init/teardown for VF resource quotas")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tariq Toukan [Thu, 15 Nov 2018 16:05:14 +0000 (18:05 +0200)]
net/mlx4_core: Fix uninitialized variable compilation warning
[ Upstream commit
3ea7e7ea53c9f6ee41cb69a29c375fe9dd9a56a7 ]
Initialize the uid variable to zero to avoid the compilation warning.
Fixes:
7a89399ffad7 ("net/mlx4: Add mlx4_bitmap zone allocator")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Morgenstein [Thu, 15 Nov 2018 16:05:13 +0000 (18:05 +0200)]
net/mlx4_core: Zero out lkey field in SW2HW_MPT fw command
[ Upstream commit
bd85fbc2038a1bbe84990b23ff69b6fc81a32b2c ]
When re-registering a user mr, the mpt information for the
existing mr when running SRIOV is obtained via the QUERY_MPT
fw command. The returned information includes the mpt's lkey.
This retrieved mpt information is used to move the mpt back
to hardware ownership in the rereg flow (via the SW2HW_MPT
fw command when running SRIOV).
The fw API spec states that for SW2HW_MPT, the lkey field
must be zero. Any ConnectX-3 PF driver which checks for strict spec
adherence will return failure for SW2HW_MPT if the lkey field is not
zero (although the fw in practice ignores this field for SW2HW_MPT).
Thus, in order to conform to the fw API spec, set the lkey field to zero
before invoking SW2HW_MPT when running SRIOV.
Fixes:
e630664c8383 ("mlx4_core: Add helper functions to support MR re-registration")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shen Jing [Thu, 1 Nov 2018 10:05:17 +0000 (15:35 +0530)]
Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
[ Upstream commit
a9c859033f6ec772f8e3228c343bb1321584ae0e ]
This reverts commit
b4194da3f9087dd38d91b40f9bec42d59ce589a8
since it causes list corruption followed by kernel panic:
Workqueue: adb ffs_aio_cancel_worker
RIP: 0010:__list_add_valid+0x4d/0x70
Call Trace:
insert_work+0x47/0xb0
__queue_work+0xf6/0x400
queue_work_on+0x65/0x70
dwc3_gadget_giveback+0x44/0x50 [dwc3]
dwc3_gadget_ep_dequeue+0x83/0x2d0 [dwc3]
? finish_wait+0x80/0x80
usb_ep_dequeue+0x1e/0x90
process_one_work+0x18c/0x3b0
worker_thread+0x3c/0x390
? process_one_work+0x3b0/0x3b0
kthread+0x11e/0x140
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x3a/0x50
This issue is seen with warm reboot stability testing.
Signed-off-by: Shen Jing <jingx.shen@intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Bolotin [Mon, 12 Nov 2018 10:50:23 +0000 (12:50 +0200)]
qed: Fix reading wrong value in loop condition
[ Upstream commit
ed4eac20dcffdad47709422e0cb925981b056668 ]
The value of "sb_index" is written by the hardware. Reading its value and
writing it to "index" must finish before checking the loop condition.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Bolotin [Mon, 12 Nov 2018 10:50:20 +0000 (12:50 +0200)]
qed: Fix PTT leak in qed_drain()
[ Upstream commit
9aaa4e8ba12972d674caeefbc5f88d83235dd697 ]
Release PTT before entering error flow.
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarsana Reddy Kalluru [Mon, 12 Nov 2018 02:27:34 +0000 (18:27 -0800)]
bnx2x: Assign unique DMAE channel number for FW DMAE transactions.
[ Upstream commit
77e461d14ed141253573eeeb4d34eccc51e38328 ]
Driver assigns DMAE channel 0 for FW as part of START_RAMROD command. FW
uses this channel for DMAE operations (e.g., TIME_SYNC implementation).
Driver also uses the same channel 0 for DMAE operations for some of the PFs
(e.g., PF0 on Port0). This could lead to concurrent access to the DMAE
channel by FW and driver which is not legal. Hence need to assign unique
DMAE id for FW.
Currently following DMAE channels are used by the clients,
MFW - OCBB/OCSD functionality uses DMAE channel 14/15
Driver 0-3 and 8-11 (for PF dmae operations)
4 and 12 (for stats requests)
Assigning unique dmae_id '13' to the FW.
Changes from previous version:
------------------------------
v2: Incorporated the review comments.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Filippo Sironi [Mon, 12 Nov 2018 12:26:30 +0000 (12:26 +0000)]
amd/iommu: Fix Guest Virtual APIC Log Tail Address Register
[ Upstream commit
ab99be4683d9db33b100497d463274ebd23bd67e ]
This register should have been programmed with the physical address
of the memory location containing the shadow tail pointer for
the guest virtual APIC log instead of the base address.
Fixes:
8bda0cfbdc1a ('iommu/amd: Detect and initialize guest vAPIC log')
Signed-off-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Wed, 7 Nov 2018 22:09:12 +0000 (23:09 +0100)]
batman-adv: Expand merged fragment buffer for full packet
[ Upstream commit
d7d8bbb40a5b1f682ee6589e212934f4c6b8ad60 ]
The complete size ("total_size") of the fragmented packet is stored in the
fragment header and in the size of the fragment chain. When the fragments
are ready for merge, the skbuff's tail of the first fragment is expanded to
have enough room after the data pointer for at least total_size. This means
that it gets expanded by total_size - first_skb->len.
But this is ignoring the fact that after expanding the buffer, the fragment
header is pulled by from this buffer. Assuming that the tailroom of the
buffer was already 0, the buffer after the data pointer of the skbuff is
now only total_size - len(fragment_header) large. When the merge function
is then processing the remaining fragments, the code to copy the data over
to the merged skbuff will cause an skb_over_panic when it tries to actually
put enough data to fill the total_size bytes of the packet.
The size of the skb_pull must therefore also be taken into account when the
buffer's tailroom is expanded.
Fixes:
610bfc6bc99b ("batman-adv: Receive fragmented packets and merge")
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Co-authored-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Tue, 30 Oct 2018 11:17:10 +0000 (12:17 +0100)]
batman-adv: Use explicit tvlv padding for ELP packets
[ Upstream commit
f4156f9656feac21f4de712fac94fae964c5d402 ]
The announcement messages of batman-adv COMPAT_VERSION 15 have the
possibility to announce additional information via a dynamic TVLV part.
This part is optional for the ELP packets and currently not parsed by the
Linux implementation. Still out-of-tree versions are using it to transport
things like neighbor hashes to optimize the rebroadcast behavior.
Since the ELP broadcast packets are smaller than the minimal ethernet
packet, it often has to be padded. This is often done (as specified in
RFC894) with octets of zero and thus work perfectly fine with the TVLV
part (making it a zero length and thus empty). But not all ethernet
compatible hardware seems to follow this advice. To avoid ambiguous
situations when parsing the TVLV header, just force the 4 bytes (TVLV
length + padding) after the required ELP header to zero.
Fixes:
d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure")
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benson Leung [Thu, 8 Nov 2018 23:59:21 +0000 (15:59 -0800)]
HID: input: Ignore battery reported by Symbol DS4308
[ Upstream commit
0fd791841a6d67af1155a9c3de54dea51220721e ]
The Motorola/Zebra Symbol DS4308-HD is a handheld USB barcode scanner
which does not have a battery, but reports one anyway that always has
capacity 2.
Let's apply the IGNORE quirk to prevent it from being treated like a
power supply so that userspaces don't get confused that this
accessory is almost out of power and warn the user that they need to charge
their wired barcode scanner.
Reported here: https://bugs.chromium.org/p/chromium/issues/detail?id=804720
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Fri, 19 Oct 2018 12:58:01 +0000 (13:58 +0100)]
test_firmware: fix error return getting clobbered
[ Upstream commit
8bb0a88600f0267cfcc245d34f8c4abe8c282713 ]
In the case where eq->fw->size > PAGE_SIZE the error return rc
is being set to EINVAL however this is being overwritten to
rc = req->fw->size because the error exit path via label 'out' is
not being taken. Fix this by adding the jump to the error exit
path 'out'.
Detected by CoverityScan, CID#1453465 ("Unused value")
Fixes:
c92316bf8e94 ("test_firmware: add batched firmware tests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabrizio Castro [Mon, 10 Sep 2018 10:43:13 +0000 (11:43 +0100)]
can: rcar_can: Fix erroneous registration
[ Upstream commit
68c8d209cd4337da4fa04c672f0b62bb735969bc ]
Assigning 2 to "renesas,can-clock-select" tricks the driver into
registering the CAN interface, even though we don't want that.
This patch improves one of the checks to prevent that from happening.
Fixes:
862e2b6af9413b43 ("can: rcar_can: support all input clocks")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Wed, 7 Nov 2018 13:18:50 +0000 (14:18 +0100)]
iommu/ipmmu-vmsa: Fix crash on early domain free
[ Upstream commit
e5b78f2e349eef5d4fca5dc1cf5a3b4b2cc27abd ]
If iommu_ops.add_device() fails, iommu_ops.domain_free() is still
called, leading to a crash, as the domain was only partially
initialized:
ipmmu-vmsa
e67b0000.mmu: Cannot accommodate DMA translation for IOMMU page tables
sata_rcar
ee300000.sata: Unable to initialize IPMMU context
iommu: Failed to add device
ee300000.sata to group 0: -22
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
...
Call trace:
ipmmu_domain_free+0x1c/0xa0
iommu_group_release+0x48/0x68
kobject_put+0x74/0xe8
kobject_del.part.0+0x3c/0x50
kobject_put+0x60/0xe8
iommu_group_get_for_dev+0xa8/0x1f0
ipmmu_add_device+0x1c/0x40
of_iommu_configure+0x118/0x190
Fix this by checking if the domain's context already exists, before
trying to destroy it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes:
d25a2a16f0889 ('iommu: Add driver for Renesas VMSA-compatible IPMMU')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rafał Miłecki [Fri, 26 Oct 2018 10:50:39 +0000 (12:50 +0200)]
brcmutil: really fix decoding channel info for 160 MHz bandwidth
[ Upstream commit
3401d42c7ea2d064d15c66698ff8eb96553179ce ]
Previous commit /adding/ support for 160 MHz chanspecs was incomplete.
It didn't set bandwidth info and didn't extract control channel info. As
the result it was also using uninitialized "sb" var.
This change has been tested for two chanspecs found to be reported by
some devices/firmwares:
1) 60/160 (0xee32)
Before: chnum:50 control_ch_num:36
After: chnum:50 control_ch_num:60
2) 120/160 (0xed72)
Before: chnum:114 control_ch_num:100
After: chnum:114 control_ch_num:120
Fixes:
330994e8e8ec ("brcmfmac: fix for proper support of 160MHz bandwidth")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lu Baolu [Mon, 5 Nov 2018 02:18:58 +0000 (10:18 +0800)]
iommu/vt-d: Fix NULL pointer dereference in prq_event_thread()
[ Upstream commit
19ed3e2dd8549c1a34914e8dad01b64e7837645a ]
When handling page request without pasid event, go to "no_pasid"
branch instead of "bad_req". Otherwise, a NULL pointer deference
will happen there.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Fixes:
a222a7f0bb6c9 'iommu/vt-d: Implement page request handling'
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sakari Ailus [Tue, 9 Oct 2018 11:49:49 +0000 (07:49 -0400)]
media: omap3isp: Unregister media device as first
[ Upstream commit
30efae3d789cd0714ef795545a46749236e29558 ]
While there are issues related to object lifetime management, unregister the
media device first when the driver is being unbound. This is slightly
safer.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sat, 8 Dec 2018 12:03:41 +0000 (13:03 +0100)]
Linux 4.14.87
Guoqing Jiang [Fri, 19 Oct 2018 04:08:22 +0000 (12:08 +0800)]
tipc: use destination length for copy string
commit
29e270fc32192e7729057963ae7120663856c93e upstream.
Got below warning with gcc 8.2 compiler.
net/tipc/topsrv.c: In function ‘tipc_topsrv_start’:
net/tipc/topsrv.c:660:2: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
strncpy(srv->name, name, strlen(name) + 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
net/tipc/topsrv.c:660:27: note: length computed here
strncpy(srv->name, name, strlen(name) + 1);
^~~~~~~~~~~~
So change it to correct length and use strscpy.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 2 Feb 2018 15:44:47 +0000 (16:44 +0100)]
net: qed: use correct strncpy() size
commit
11f711081af0eb54190dc0de96ba4a9cd494666b upstream.
passing the strlen() of the source string as the destination
length is pointless, and gcc-8 now warns about it:
drivers/net/ethernet/qlogic/qed/qed_debug.c: In function 'qed_grc_dump':
include/linux/string.h:253: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
This changes qed_grc_dump_big_ram() to instead uses the length of
the destination buffer, and use strscpy() to guarantee nul-termination.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roman Gushchin [Tue, 30 Oct 2018 17:48:25 +0000 (17:48 +0000)]
mm: hide incomplete nr_indirectly_reclaimable in /proc/zoneinfo
[fixed differently upstream, this is a work-around to resolve it for 4.14.y]
Yongqin reported that /proc/zoneinfo format is broken in 4.14
due to commit
7aaf77272358 ("mm: don't show nr_indirectly_reclaimable
in /proc/vmstat")
Node 0, zone DMA
per-node stats
nr_inactive_anon 403
nr_active_anon 89123
nr_inactive_file 128887
nr_active_file 47377
nr_unevictable 2053
nr_slab_reclaimable 7510
nr_slab_unreclaimable 10775
nr_isolated_anon 0
nr_isolated_file 0
<...>
nr_vmscan_write 0
nr_vmscan_immediate_reclaim 0
nr_dirtied 6022
nr_written 5985
74240
^^^^^^^^^^
pages free 131656
The problem is caused by the nr_indirectly_reclaimable counter,
which is hidden from the /proc/vmstat, but not from the
/proc/zoneinfo. Let's fix this inconsistency and hide the
counter from /proc/zoneinfo exactly as from /proc/vmstat.
BTW, in 4.19+ the counter has been renamed and exported by
the commit
b29940c1abd7 ("mm: rename and change semantics of
nr_indirectly_reclaimable_bytes"), so there is no such a problem
anymore.
Cc: <stable@vger.kernel.org> # 4.14.x-4.18.x
Fixes:
7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Lezcano [Thu, 19 Oct 2017 17:05:51 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove costly sensor inspection
commit
10d7e9a9181f4637640f388d334c6740c1b5d0e8 upstream.
The sensor is all setup, bind, resetted, acked, etc... every single second.
That was the way to workaround a problem with the interrupt bouncing again and
again.
With the following changes, we fix all in one:
- Do the setup, one time, at probe time
- Add the IRQF_ONESHOT, ack the interrupt in the threaded handler
- Remove the interrupt handler
- Set the correct value for the LAG register
- Remove all the irq_enabled stuff in the code as the interruption
handling is fixed
- Remove the 3ms delay
- Reorder the initialization routine to be in the right order
It ends up to a nicer code and more efficient, the 3-5ms delay is removed from
the get_temp() path.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Lezcano [Thu, 19 Oct 2017 17:05:50 +0000 (19:05 +0200)]
thermal/drivers/hisi: Fix configuration register setting
commit
b424315a287c70eeb5f920f84c92492bd2f5658e upstream.
The TEMP0_CFG configuration register contains different field to set up the
temperature controller. However in the code, nothing prevents a setup to
overwrite the previous one: eg. writing the hdak value overwrites the sensor
selection, the sensor selection overwrites the hdak value.
In order to prevent such thing, use a regmap-like mechanism by reading the
value before, set the corresponding bits and write the result.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Lezcano [Thu, 19 Oct 2017 17:05:49 +0000 (19:05 +0200)]
thermal/drivers/hisi: Encapsulate register writes into helpers
commit
1e11b014271ceccb5ea04ae58f4829ac8209a86d upstream.
Hopefully, the function name can help to clarify the semantic of the operations
when writing in the register.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Lezcano [Thu, 19 Oct 2017 17:05:48 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove pointless lock
commit
2d4fa7b4c6f8080ced2e8237c9f46fb1fc110d64 upstream.
The threaded interrupt inspect the sensors structure to look in the temp
threshold field, but this field is read-only in all the code, except in the
probe function before the threaded interrupt is set. In other words there
is not race window in the threaded interrupt when reading the field value.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Lezcano [Thu, 19 Oct 2017 17:05:44 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove the multiple sensors support
commit
ff4ec2997df8fe7cc40513dbe5f86d9f88fb6be7 upstream.
By essence, the tsensor does not really support multiple sensor at the same
time. It allows to set a sensor and use it to get the temperature, another
sensor could be switched but with a delay of 3-5ms. It is difficult to read
simultaneously several sensors without a big delay.
Today, just one sensor is used, it is not necessary to deal with multiple
sensors in the code. Remove them and if it is needed in the future add them
on top of a code which will be clean up in the meantime.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Wangtao (Kevin, Kirin) <kevin.wangtao@hisilicon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Tikhomirov [Fri, 30 Nov 2018 22:09:00 +0000 (14:09 -0800)]
mm: cleancache: fix corruption on missed inode invalidation
commit
6ff38bd40230af35e446239396e5fc8ebd6a5248 upstream.
If all pages are deleted from the mapping by memory reclaim and also
moved to the cleancache:
__delete_from_page_cache
(no shadow case)
unaccount_page_cache_page
cleancache_put_page
page_cache_delete
mapping->nrpages -= nr
(nrpages becomes 0)
We don't clean the cleancache for an inode after final file truncation
(removal).
truncate_inode_pages_final
check (nrpages || nrexceptional) is false
no truncate_inode_pages
no cleancache_invalidate_inode(mapping)
These way when reading the new file created with same inode we may get
these trash leftover pages from cleancache and see wrong data instead of
the contents of the new file.
Fix it by always doing truncate_inode_pages which is already ready for
nrpages == 0 && nrexceptional == 0 case and just invalidates inode.
[akpm@linux-foundation.org: add comment, per Jan]
Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com
Fixes: commit
91b0abe36a7b ("mm + fs: store shadow entries in page cache")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Sat, 28 Oct 2017 16:50:07 +0000 (01:50 +0900)]
reset: remove remaining WARN_ON() in <linux/reset.h>
commit
bb6c7768385b200063a14d6615cc1246c3d00760 upstream.
Commit
bb475230b8e5 ("reset: make optional functions really optional")
gave a new meaning to _get_optional variants.
The differentiation by WARN_ON() is not needed any more. We already
have inconsistency about this; (devm_)reset_control_get_exclusive()
has WARN_ON() check, but of_reset_control_get_exclusive() does not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Sat, 28 Oct 2017 16:50:06 +0000 (01:50 +0900)]
reset: make device_reset_optional() really optional
commit
1554bbd4ad401b7f0f916c0891874111c10befe5 upstream.
Commit
bb475230b8e5 ("reset: make optional functions really optional")
converted *_get_optional* functions, but device_reset_optional() was
left behind. Convert it in the same way.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 16 Nov 2018 12:43:17 +0000 (13:43 +0100)]
udf: Allow mounting volumes with incorrect identification strings
commit
b54e41f5efcb4316b2f30b30c2535cc194270373 upstream.
Commit
c26f6c615788 ("udf: Fix conversion of 'dstring' fields to UTF8")
started to be more strict when checking whether converted strings are
properly formatted. Sudip reports that there are DVDs where the volume
identification string is actually too long - UDF reports:
[ 632.309320] UDF-fs: incorrect dstring lengths (32/32)
during mount and fails the mount. This is mostly harmless failure as we
don't need volume identification (and even less volume set
identification) for anything. So just truncate the volume identification
string if it is too long and replace it with 'Invalid' if we just cannot
convert it for other reasons. This keeps slightly incorrect media still
mountable.
CC: stable@vger.kernel.org
Fixes:
c26f6c615788 ("udf: Fix conversion of 'dstring' fields to UTF8")
Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Brodkin [Tue, 20 Nov 2018 10:30:19 +0000 (13:30 +0300)]
arc: [devboards] Add support of NFSv3 ACL
commit
6b04114f6fae5e84d33404c2970b1949c032546e upstream.
By default NFSv3 doesn't support ACL (Access Control Lists)
which might be quite convenient to have so that
mounted NFS behaves exactly as any other local file-system.
In particular missing support of ACL makes umask useless.
This among other thigs fixes Glibc's "nptl/tst-umask1".
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: stable@vger.kernel.org #4.14+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin Hilman [Fri, 30 Nov 2018 12:51:56 +0000 (15:51 +0300)]
ARC: change defconfig defaults to ARCv2
commit
b7cc40c32a8bfa6f2581a71747f6a7d491fe43ba upstream.
Change the default defconfig (used with 'make defconfig') to the ARCv2
nsim_hs_defconfig, and also switch the default Kconfig ISA selection to
ARCv2.
This allows several default defconfigs (e.g. make defconfig, make
allnoconfig, make tinyconfig) to all work with ARCv2 by default.
Note since we change default architecture from ARCompact to ARCv2
it's required to explicitly mention architecture type in ARCompact
defconfigs otherwise ARCv2 will be implied and binaries will be
generated for ARCv2.
Cc: <stable@vger.kernel.org> # 4.4.x
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikolay Borisov [Tue, 6 Nov 2018 14:40:20 +0000 (16:40 +0200)]
btrfs: Always try all copies when reading extent buffers
commit
f8397d69daef06d358430d3054662fb597e37c00 upstream.
When a metadata read is served the endio routine btree_readpage_end_io_hook
is called which eventually runs the tree-checker. If tree-checker fails
to validate the read eb then it sets EXTENT_BUFFER_CORRUPT flag. This
leads to btree_read_extent_buffer_pages wrongly assuming that all
available copies of this extent buffer are wrong and failing prematurely.
Fix this modify btree_read_extent_buffer_pages to read all copies of
the data.
This failure was exhibitted in xfstests btrfs/124 which would
spuriously fail its balance operations. The reason was that when balance
was run following re-introduction of the missing raid1 disk
__btrfs_map_block would map the read request to stripe 0, which
corresponded to devid 2 (the disk which is being removed in the test):
item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM
3553624064) itemoff 15975 itemsize 112
length
1073741824 owner 2 stripe_len 65536 type DATA|RAID1
io_align 65536 io_width 65536 sector_size 4096
num_stripes 2 sub_stripes 1
stripe 0 devid 2 offset
2156920832
dev_uuid
8466c350-ed0c-4c3b-b17d-
6379b445d5c8
stripe 1 devid 1 offset
3553624064
dev_uuid
1265d8db-5596-477e-af03-
df08eb38d2ca
This caused read requests for a checksum item that to be routed to the
stale disk which triggered the aforementioned logic involving
EXTENT_BUFFER_CORRUPT flag. This then triggered cascading failures of
the balance operation.
Fixes:
a826d6dcb32d ("Btrfs: check items for correctness as we search")
CC: stable@vger.kernel.org # 4.4+
Suggested-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qu Wenruo [Fri, 23 Nov 2018 01:06:36 +0000 (09:06 +0800)]
btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable
commit
10950929e994c5ecee149ff0873388d3c98f12b5 upstream.
[BUG]
A completely valid btrfs will refuse to mount, with error message like:
BTRFS critical (device sdb2): corrupt leaf: root=2 block=
239681536 slot=172 \
bg_start=
12018974720 bg_len=
10888413184, invalid block group size, \
have
10888413184 expect (0,
10737418240]
This has been reported several times as the 4.19 kernel is now being
used. The filesystem refuses to mount, but is otherwise ok and booting
4.18 is a workaround.
Btrfs check returns no error, and all kernels used on this fs is later
than 2011, which should all have the 10G size limit commit.
[CAUSE]
For a 12 devices btrfs, we could allocate a chunk larger than 10G due to
stripe stripe bump up.
__btrfs_alloc_chunk()
|- max_stripe_size = 1G
|- max_chunk_size = 10G
|- data_stripe = 11
|- if (1G * 11 > 10G) {
stripe_size =
976128930;
stripe_size = round_up(
976128930, SZ_16M) =
989855744
However the final stripe_size (
989855744) * 11 =
10888413184, which is
still larger than 10G.
[FIX]
For the comprehensive check, we need to do the full check at chunk read
time, and rely on bg <-> chunk mapping to do the check.
We could just skip the length check for now.
Fixes:
fce466eab7ac ("btrfs: tree-checker: Verify block_group_item")
Cc: stable@vger.kernel.org # v4.19+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adam Wong [Thu, 29 Nov 2018 18:04:35 +0000 (10:04 -0800)]
Input: elan_i2c - add support for ELAN0621 touchpad
commit
bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b upstream.
Added the ability to detect the ELAN0621 touchpad found in some Lenovo
laptops.
Signed-off-by: Adam Wong <adam@adamwong.me>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noah Westervelt [Thu, 29 Nov 2018 18:10:35 +0000 (10:10 -0800)]
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
commit
ad33429cd02565c28404bb16ae7a4c2bdfda6626 upstream.
Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo
IdeaPad 330-15ARR.
Signed-off-by: Noah Westervelt <nwestervelt@outlook.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patrick Gaskin [Mon, 12 Nov 2018 19:12:24 +0000 (11:12 -0800)]
Input: elan_i2c - add ELAN0620 to the ACPI table
commit
3ed64da3b790be7c63601e8ca6341b7dff74a660 upstream.
Add ELAN0620 to the ACPI table to support the elan touchpad in
the Lenovo IdeaPad 130-15IKB.
Signed-off-by: Patrick Gaskin <patrick@pgaskin.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Mon, 12 Nov 2018 19:23:39 +0000 (11:23 -0800)]
Input: cros_ec_keyb - fix button/switch capability reports
commit
ac5722c1643a2fb75224c79b578214956d34f989 upstream.
The cros_ec_keyb_bs array lists buttons and switches together, expecting
that its users will match the appropriate type and bit fields. But
cros_ec_keyb_register_bs() only checks the 'bit' field, which causes
misreported input capabilities in some cases. For example, tablets
(e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID
capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to
share the same bit.
(This has comedic effect on a tablet, in which a power-management daemon
then thinks this "lid" is closed, and so puts the system to sleep as
soon as it boots!)
To fix this, check both the 'ev_type' and 'bit' fields before reporting
the capability.
Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid
(Scarlet / Acer Chromebook Tab 10).
This error got introduced when porting the feature from the downstream
Chromium OS kernel to be upstreamed.
Fixes:
cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Hoff [Mon, 12 Nov 2018 19:11:29 +0000 (11:11 -0800)]
Input: matrix_keypad - check for errors from of_get_named_gpio()
commit
d55bda1b3e7c5a87f10da54fdda866a9a9cef30b upstream.
"of_get_named_gpio()" returns a negative error value if it fails
and drivers should check for this. This missing check was now
added to the matrix_keypad driver.
In my case "of_get_named_gpio()" returned -EPROBE_DEFER because
the referenced GPIOs belong to an I/O expander, which was not yet
probed at the point in time when the matrix_keypad driver was
loading. Because the driver did not check for errors from the
"of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER"
is actually a GPIO number and continued as usual, which led to further
errors like this later on:
WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114
gpio_to_desc+0xc8/0xd0
invalid GPIO -517
Note that the "GPIO number" -517 in the error message above is
actually "-EPROBE_DEFER".
As part of the patch a misleading error message "no platform data defined"
was also removed. This does not lead to information loss because the other
error paths in matrix_keypad_parse_dt() already print an error.
Signed-off-by: Christian Hoff <christian_hoff@gmx.net>
Suggested-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Sun, 25 Nov 2018 07:28:10 +0000 (23:28 -0800)]
Input: synaptics - add PNP ID for ThinkPad P50 to SMBus
commit
9df39bedbf292680655c6a947c77d6562c693d4a upstream.
Noticed the other day the trackpoint felt different on my P50, then
realized it was because rmi4 wasn't loading for this machine
automatically. Suspend/resume, hibernate, and everything else seem to
work perfectly fine on here.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cameron Gutman [Thu, 29 Nov 2018 18:09:33 +0000 (10:09 -0800)]
Input: xpad - quirk all PDP Xbox One gamepads
commit
a6754fae1e66e9a40fed406290d7ca3f2b4d227c upstream.
Since we continue to find tons of new variants [0,1,2,3,4,5,6] that
need the PDP quirk, let's just quirk all devices from PDP.
[0]: https://github.com/paroj/xpad/pull/104
[1]: https://github.com/paroj/xpad/pull/105
[2]: https://github.com/paroj/xpad/pull/108
[3]: https://github.com/paroj/xpad/pull/109
[4]: https://github.com/paroj/xpad/pull/112
[5]: https://github.com/paroj/xpad/pull/115
[6]: https://github.com/paroj/xpad/pull/116
Fixes:
e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 27 Aug 2018 08:21:47 +0000 (10:21 +0200)]
drm/msm: fix OF child-node lookup
commit
f9a7082327e26f54067a49cac2316d31e0cc8ba7 upstream.
Use the new of_get_compatible_child() helper to lookup the legacy
pwrlevels child node instead of using of_find_compatible_node(), which
searches the entire tree from a given start node and thus can return an
unrelated (i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the probed device's node).
While at it, also fix the related child-node reference leak.
Fixes:
e2af8b6b0ca1 ("drm/msm: gpu: Use OPP tables if we can")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
[ johan: backport to 4.14 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Wang [Mon, 12 Nov 2018 12:23:14 +0000 (12:23 +0000)]
svm: Add mutex_lock to protect apic_access_page_done on AMD systems
commit
30510387a5e45bfcf8190e03ec7aa15b295828e2 upstream.
There is a race condition when accessing kvm->arch.apic_access_page_done.
Due to it, x86_set_memory_region will fail when creating the second vcpu
for a svm guest.
Add a mutex_lock to serialize the accesses to apic_access_page_done.
This lock is also used by vmx for the same purpose.
Signed-off-by: Wei Wang <wawei@amazon.de>
Signed-off-by: Amadeusz Juskowiak <ajusk@amazon.de>
Signed-off-by: Julian Stecklina <jsteckli@amazon.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Thu, 20 Sep 2018 01:59:01 +0000 (18:59 -0700)]
kgdboc: Fix warning with module build
commit
1cd25cbb2fedbc777f3a8c3cb1ba69b645aeaa64 upstream.
After
2dd453168643 ("kgdboc: Fix restrict error"), kgdboc_option_setup is
now only used when built in, resulting in a warning when compiled as a
module:
drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function]
static int kgdboc_option_setup(char *opt)
^~~~~~~~~~~~~~~~~~~
Move the function under the appropriate ifdef for builtin only.
Fixes:
2dd453168643 ("kgdboc: Fix restrict error")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Laura Abbott [Mon, 10 Sep 2018 23:20:14 +0000 (16:20 -0700)]
kgdboc: Fix restrict error
commit
2dd453168643d9475028cd867c57e65956a0f7f9 upstream.
There's an error when compiled with restrict:
drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’:
drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same
as destination [-Werror=restrict]
strcpy(config, opt);
^~~~~~~~~~~~~~~~~~~
As the error implies, this is from trying to use config as both source and
destination. Drop the call to the function where config is the argument
since nothing else happens in the function.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 26 Jul 2018 12:58:03 +0000 (14:58 +0200)]
ALSA: trident: Suppress gcc string warning
commit
d6b340d7cb33c816ef4abe8143764ec5ab14a5cc upstream.
The meddlesome gcc warns about the possible shortname string in
trident driver code:
sound/pci/trident/trident.c: In function ‘snd_trident_probe’:
sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict]
strcat(card->shortname, card->driver);
It happens since gcc calculates the possible string size from
card->driver, but this can't be true since we did set the string just
before that, and they are much shorter.
For shutting it up, use the exactly same string set to card->driver
for strcat() to card->shortname, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:32 +0000 (14:09 -0800)]
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
commit
29ec90660d68bbdd69507c1c8b4e33aa299278b1 upstream.
After the VMA to register the uffd onto is found, check that it has
VM_MAYWRITE set before allowing registration. This way we inherit all
common code checks before allowing to fill file holes in shmem and
hugetlbfs with UFFDIO_COPY.
The userfaultfd memory model is not applicable for readonly files unless
it's a MAP_PRIVATE.
Link: http://lkml.kernel.org/r/20181126173452.26955-4-aarcange@redhat.com
Fixes:
ff62a3421044 ("hugetlb: implement memfd sealing")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Wilck [Mon, 27 Nov 2017 22:47:35 +0000 (23:47 +0100)]
scsi: scsi_devinfo: cleanly zero-pad devinfo strings
commit
81df022b688d43d2a3667518b2f755d384397910 upstream.
Cleanly fill memory for "vendor" and "model" with 0-bytes for the
"compatible" case rather than adding only a single 0 byte. This
simplifies the devinfo code a a bit, and avoids mistakes in other places
of the code (not in current upstream, but we had one such mistake in the
SUSE kernel).
[mkp: applied by hand and added braces]
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:43 +0000 (14:09 -0800)]
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
commit
dcf7fe9d89763a28e0f43975b422ff141fe79e43 upstream.
Set the page dirty if VM_WRITE is not set because in such case the pte
won't be marked dirty and the page would be reclaimed without writepage
(i.e. swapout in the shmem case).
This was found by source review. Most apps (certainly including QEMU)
only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't
modify the memory in the first place. This is for correctness and it
could help the non cooperative use case to avoid unexpected data loss.
Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:37 +0000 (14:09 -0800)]
userfaultfd: shmem: add i_size checks
commit
e2a50c1f64145a04959df2442305d57307e5395a upstream.
With MAP_SHARED: recheck the i_size after taking the PT lock, to
serialize against truncate with the PT lock. Delete the page from the
pagecache if the i_size_read check fails.
With MAP_PRIVATE: check the i_size after the PT lock before mapping
anonymous memory or zeropages into the MAP_PRIVATE shmem mapping.
A mostly irrelevant cleanup: like we do the delete_from_page_cache()
pagecache removal after dropping the PT lock, the PT lock is a spinlock
so drop it before the sleepable page lock.
Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:28 +0000 (14:09 -0800)]
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
commit
5b51072e97d587186c2f5390c8c9c1fb7e179505 upstream.
Userfaultfd did not create private memory when UFFDIO_COPY was invoked
on a MAP_PRIVATE shmem mapping. Instead it wrote to the shmem file,
even when that had not been opened for writing. Though, fortunately,
that could only happen where there was a hole in the file.
Fix the shmem-backed implementation of UFFDIO_COPY to create private
memory for MAP_PRIVATE mappings. The hugetlbfs-backed implementation
was already correct.
This change is visible to userland, if userfaultfd has been used in
unintended ways: so it introduces a small risk of incompatibility, but
is necessary in order to respect file permissions.
An app that uses UFFDIO_COPY for anything like postcopy live migration
won't notice the difference, and in fact it'll run faster because there
will be no copy-on-write and memory waste in the tmpfs pagecache
anymore.
Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like
before.
The real zeropage can also be built on a MAP_PRIVATE shmem mapping
through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is
never dirty, in turn even an mprotect upgrading the vma permission from
PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable.
Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:25 +0000 (14:09 -0800)]
userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails
commit
9e368259ad988356c4c95150fafd1a06af095d98 upstream.
Patch series "userfaultfd shmem updates".
Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the
lack of the VM_MAYWRITE check and the lack of i_size checks.
Then looking into the above we also fixed the MAP_PRIVATE case.
Hugh by source review also found a data loss source if UFFDIO_COPY is
used on shmem MAP_SHARED PROT_READ mappings (the production usages
incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't
happen in those production usages like with QEMU).
The whole patchset is marked for stable.
We verified QEMU postcopy live migration with guest running on shmem
MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE.
Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU
unconditionally invokes a punch hole if the guest mapping is filebacked
and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and
for the anon backend).
This patch (of 5):
We internally used EFAULT to communicate with the caller, switch to
ENOENT, so EFAULT can be used as a non internal retval.
Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com
Fixes:
4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Sun, 25 Nov 2018 01:21:17 +0000 (20:21 -0500)]
drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()
commit
97b2a3180a559a33852ac0cd77904166069484fd upstream.
Currently on driver bringup with KASAN enabled, meson triggers an OOB
memory access as shown below:
[ 117.904528] ==================================================================
[ 117.904560] BUG: KASAN: global-out-of-bounds in meson_viu_set_osd_lut+0x7a0/0x890
[ 117.904588] Read of size 4 at addr
ffff20000a63ce24 by task systemd-udevd/498
[ 117.904601]
[ 118.083372] CPU: 4 PID: 498 Comm: systemd-udevd Not tainted 4.20.0-rc3Lyude-Test+ #20
[ 118.091143] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 118.099768] Call trace:
[ 118.102181] dump_backtrace+0x0/0x3e8
[ 118.105796] show_stack+0x14/0x20
[ 118.109083] dump_stack+0x130/0x1c4
[ 118.112539] print_address_description+0x60/0x25c
[ 118.117214] kasan_report+0x1b4/0x368
[ 118.120851] __asan_report_load4_noabort+0x18/0x20
[ 118.125566] meson_viu_set_osd_lut+0x7a0/0x890
[ 118.129953] meson_viu_init+0x10c/0x290
[ 118.133741] meson_drv_bind_master+0x474/0x748
[ 118.138141] meson_drv_bind+0x10/0x18
[ 118.141760] try_to_bring_up_master+0x3d8/0x768
[ 118.146249] component_add+0x214/0x570
[ 118.149978] meson_dw_hdmi_probe+0x18/0x20 [meson_dw_hdmi]
[ 118.155404] platform_drv_probe+0x98/0x138
[ 118.159455] really_probe+0x2a0/0xa70
[ 118.163070] driver_probe_device+0x1b4/0x2d8
[ 118.167299] __driver_attach+0x200/0x280
[ 118.171189] bus_for_each_dev+0x10c/0x1a8
[ 118.175144] driver_attach+0x38/0x50
[ 118.178681] bus_add_driver+0x330/0x608
[ 118.182471] driver_register+0x140/0x388
[ 118.186361] __platform_driver_register+0xc8/0x108
[ 118.191117] meson_dw_hdmi_platform_driver_init+0x1c/0x1000 [meson_dw_hdmi]
[ 118.198022] do_one_initcall+0x12c/0x3bc
[ 118.201883] do_init_module+0x1fc/0x638
[ 118.205673] load_module+0x4b4c/0x6808
[ 118.209387] __se_sys_init_module+0x2e8/0x3c0
[ 118.213699] __arm64_sys_init_module+0x68/0x98
[ 118.218100] el0_svc_common+0x104/0x210
[ 118.221893] el0_svc_handler+0x48/0xb8
[ 118.225594] el0_svc+0x8/0xc
[ 118.228429]
[ 118.229887] The buggy address belongs to the variable:
[ 118.235007] eotf_33_linear_mapping+0x84/0xc0
[ 118.239301]
[ 118.240752] Memory state around the buggy address:
[ 118.245522]
ffff20000a63cd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 118.252695]
ffff20000a63cd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 118.259850] >
ffff20000a63ce00: 00 00 00 00 04 fa fa fa fa fa fa fa 00 00 00 00
[ 118.267000] ^
[ 118.271222]
ffff20000a63ce80: 00 fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[ 118.278393]
ffff20000a63cf00: 00 00 00 00 00 00 00 00 00 00 00 00 04 fa fa fa
[ 118.285542] ==================================================================
[ 118.292699] Disabling lock debugging due to kernel taint
It seems that when looping through the OSD EOTF LUT maps, we use the
same max iterator for OETF: 20. This is wrong though, since 20*2 is 40,
which means that we'll stop out of bounds on the EOTF maps.
But, this whole thing is already confusing enough to read through as-is,
so let's just replace all of the hardcoded sizes with
OSD_(OETF/EOTF)_LUT_SIZE / 2.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.10+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181125012117.31915-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Sat, 24 Nov 2018 19:12:38 +0000 (14:12 -0500)]
drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config
commit
995b278e4723b26f8ebf0e7c119286d16c712747 upstream.
Seeing as we use this registermap in the context of our IRQ handlers, we
need to be using spinlocks for reading/writing registers so that we can
still read them from IRQ handlers without having to grab any mutexes and
accidentally sleep. We don't currently do this, as pointed out by
lockdep:
[ 18.403770] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[ 18.406744] in_atomic(): 1, irqs_disabled(): 128, pid: 68, name: kworker/u17:0
[ 18.413864] INFO: lockdep is turned off.
[ 18.417675] irq event stamp: 12
[ 18.420778] hardirqs last enabled at (11): [<
ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[ 18.429510] hardirqs last disabled at (12): [<
ffff000008a48914>] __schedule+0xc4/0xa60
[ 18.437345] softirqs last enabled at (0): [<
ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[ 18.446684] softirqs last disabled at (0): [<
0000000000000000>] (null)
[ 18.453979] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9
[ 18.469839] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 18.480037] Workqueue: hci0 hci_power_on [bluetooth]
[ 18.487138] Call trace:
[ 18.494192] dump_backtrace+0x0/0x1b8
[ 18.501280] show_stack+0x14/0x20
[ 18.508361] dump_stack+0xbc/0xf4
[ 18.515427] ___might_sleep+0x140/0x1d8
[ 18.522515] __might_sleep+0x50/0x88
[ 18.529582] __mutex_lock+0x60/0x870
[ 18.536621] mutex_lock_nested+0x1c/0x28
[ 18.543660] regmap_lock_mutex+0x10/0x18
[ 18.550696] regmap_read+0x38/0x70
[ 18.557727] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[ 18.564804] __handle_irq_event_percpu+0xac/0x410
[ 18.571891] handle_irq_event_percpu+0x34/0x88
[ 18.578982] handle_irq_event+0x48/0x78
[ 18.586051] handle_fasteoi_irq+0xac/0x160
[ 18.593061] generic_handle_irq+0x24/0x38
[ 18.599989] __handle_domain_irq+0x60/0xb8
[ 18.606857] gic_handle_irq+0x50/0xa0
[ 18.613659] el1_irq+0xb4/0x130
[ 18.620394] debug_lockdep_rcu_enabled+0x2c/0x30
[ 18.627111] schedule+0x38/0xa0
[ 18.633781] schedule_timeout+0x3a8/0x510
[ 18.640389] wait_for_common+0x15c/0x180
[ 18.646905] wait_for_completion+0x14/0x20
[ 18.653319] mmc_wait_for_req_done+0x28/0x168
[ 18.659693] mmc_wait_for_req+0xa8/0xe8
[ 18.665978] mmc_wait_for_cmd+0x64/0x98
[ 18.672180] mmc_io_rw_direct_host+0x94/0x130
[ 18.678385] mmc_io_rw_direct+0x10/0x18
[ 18.684516] sdio_enable_func+0xe8/0x1d0
[ 18.690627] btsdio_open+0x24/0xc0 [btsdio]
[ 18.696821] hci_dev_do_open+0x64/0x598 [bluetooth]
[ 18.703025] hci_power_on+0x50/0x270 [bluetooth]
[ 18.709163] process_one_work+0x2a0/0x6e0
[ 18.715252] worker_thread+0x40/0x448
[ 18.721310] kthread+0x12c/0x130
[ 18.727326] ret_from_fork+0x10/0x1c
[ 18.735555] ------------[ cut here ]------------
[ 18.741430] do not call blocking ops when !TASK_RUNNING; state=2 set at [<
000000006265ec59>] wait_for_common+0x140/0x180
[ 18.752417] WARNING: CPU: 0 PID: 68 at kernel/sched/core.c:6096 __might_sleep+0x7c/0x88
[ 18.760553] Modules linked in: dm_mirror dm_region_hash dm_log dm_mod
btsdio bluetooth snd_soc_hdmi_codec dw_hdmi_i2s_audio ecdh_generic
brcmfmac brcmutil cfg80211 rfkill ir_nec_decoder meson_dw_hdmi(O)
dw_hdmi rc_geekbox meson_rng meson_ir ao_cec rng_core rc_core cec
leds_pwm efivars nfsd ip_tables x_tables crc32_generic f2fs uas
meson_gxbb_wdt pwm_meson efivarfs ipv6
[ 18.799469] CPU: 0 PID: 68 Comm: kworker/u17:0 Tainted: G W O 4.20.0-rc3Lyude-Test+ #9
[ 18.808858] Hardware name: amlogic khadas-vim2/khadas-vim2, BIOS 2018.07-rc2-armbian 09/11/2018
[ 18.818045] Workqueue: hci0 hci_power_on [bluetooth]
[ 18.824088] pstate:
80000085 (Nzcv daIf -PAN -UAO)
[ 18.829891] pc : __might_sleep+0x7c/0x88
[ 18.835722] lr : __might_sleep+0x7c/0x88
[ 18.841256] sp :
ffff000008003cb0
[ 18.846751] x29:
ffff000008003cb0 x28:
0000000000000000
[ 18.852269] x27:
ffff00000938e000 x26:
ffff800010283000
[ 18.857726] x25:
ffff800010353280 x24:
ffff00000868ef50
[ 18.863166] x23:
0000000000000000 x22:
0000000000000000
[ 18.868551] x21:
0000000000000000 x20:
000000000000038c
[ 18.873850] x19:
ffff000008cd08c0 x18:
0000000000000010
[ 18.879081] x17:
ffff000008a68cb0 x16:
0000000000000000
[ 18.884197] x15:
0000000000aaaaaa x14:
0e200e200e200e20
[ 18.889239] x13:
0000000000000001 x12:
00000000ffffffff
[ 18.894261] x11:
ffff000008adfa48 x10:
0000000000000001
[ 18.899517] x9 :
ffff0000092a0158 x8 :
0000000000000000
[ 18.904674] x7 :
ffff00000812136c x6 :
0000000000000000
[ 18.909895] x5 :
0000000000000000 x4 :
0000000000000001
[ 18.915080] x3 :
0000000000000007 x2 :
0000000000000007
[ 18.920269] x1 :
99ab8e9ebb6c8500 x0 :
0000000000000000
[ 18.925443] Call trace:
[ 18.929904] __might_sleep+0x7c/0x88
[ 18.934311] __mutex_lock+0x60/0x870
[ 18.938687] mutex_lock_nested+0x1c/0x28
[ 18.943076] regmap_lock_mutex+0x10/0x18
[ 18.947453] regmap_read+0x38/0x70
[ 18.951842] dw_hdmi_hardirq+0x58/0x138 [dw_hdmi]
[ 18.956269] __handle_irq_event_percpu+0xac/0x410
[ 18.960712] handle_irq_event_percpu+0x34/0x88
[ 18.965176] handle_irq_event+0x48/0x78
[ 18.969612] handle_fasteoi_irq+0xac/0x160
[ 18.974058] generic_handle_irq+0x24/0x38
[ 18.978501] __handle_domain_irq+0x60/0xb8
[ 18.982938] gic_handle_irq+0x50/0xa0
[ 18.987351] el1_irq+0xb4/0x130
[ 18.991734] debug_lockdep_rcu_enabled+0x2c/0x30
[ 18.996180] schedule+0x38/0xa0
[ 19.000609] schedule_timeout+0x3a8/0x510
[ 19.005064] wait_for_common+0x15c/0x180
[ 19.009513] wait_for_completion+0x14/0x20
[ 19.013951] mmc_wait_for_req_done+0x28/0x168
[ 19.018402] mmc_wait_for_req+0xa8/0xe8
[ 19.022809] mmc_wait_for_cmd+0x64/0x98
[ 19.027177] mmc_io_rw_direct_host+0x94/0x130
[ 19.031563] mmc_io_rw_direct+0x10/0x18
[ 19.035922] sdio_enable_func+0xe8/0x1d0
[ 19.040294] btsdio_open+0x24/0xc0 [btsdio]
[ 19.044742] hci_dev_do_open+0x64/0x598 [bluetooth]
[ 19.049228] hci_power_on+0x50/0x270 [bluetooth]
[ 19.053687] process_one_work+0x2a0/0x6e0
[ 19.058143] worker_thread+0x40/0x448
[ 19.062608] kthread+0x12c/0x130
[ 19.067064] ret_from_fork+0x10/0x1c
[ 19.071513] irq event stamp: 12
[ 19.075937] hardirqs last enabled at (11): [<
ffff000008a4f57c>] _raw_spin_unlock_irq+0x2c/0x60
[ 19.083560] hardirqs last disabled at (12): [<
ffff000008a48914>] __schedule+0xc4/0xa60
[ 19.091401] softirqs last enabled at (0): [<
ffff0000080b55e0>] copy_process.isra.4.part.5+0x4d8/0x1c50
[ 19.100801] softirqs last disabled at (0): [<
0000000000000000>] (null)
[ 19.108135] ---[ end trace
38c4920787b88c75 ]---
So, fix this by enabling the fast_io option in our regmap config so that
regmap uses spinlocks for locking instead of mutexes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes:
3f68be7d8e96 ("drm/meson: Add support for HDMI encoder and DW-HDMI bridge + PHY")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v4.12+
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181124191238.28276-1-lyude@redhat.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sergio Correia [Thu, 22 Nov 2018 05:33:29 +0000 (02:33 -0300)]
drm: set is_master to 0 upon drm_new_set_master() failure
commit
23a336b34258aba3b50ea6863cca4e81b5ef6384 upstream.
When drm_new_set_master() fails, set is_master to 0, to prevent a
possible NULL pointer deref.
Here is a problematic flow: we check is_master in drm_is_current_master(),
then proceed to call drm_lease_owner() passing master. If we do not restore
is_master status when drm_new_set_master() fails, we may have a situation
in which is_master will be 1 and master itself, NULL, leading to the deref
of a NULL pointer in drm_lease_owner().
This fixes the following OOPS, observed on an ArchLinux running a 4.19.2
kernel:
[ 97.804282] BUG: unable to handle kernel NULL pointer dereference at
0000000000000080
[ 97.807224] PGD 0 P4D 0
[ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1
[ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018
[ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[ 97.807224] RSP: 0018:
ffffb8cf08e07bb0 EFLAGS:
00010202
[ 97.807224] RAX:
0000000000000000 RBX:
ffff9cf0f2586c00 RCX:
ffff9cf0f2586c88
[ 97.807224] RDX:
ffff9cf0ddbd8000 RSI:
0000000000000000 RDI:
0000000000000000
[ 97.807224] RBP:
ffff9cf1040e9800 R08:
0000000000000000 R09:
0000000000000000
[ 97.807224] R10:
ffffdeb30fd5d680 R11:
ffffdeb30f5d6808 R12:
ffff9cf1040e9888
[ 97.807224] R13:
0000000000000000 R14:
dead000000000200 R15:
ffff9cf0f2586cc8
[ 97.807224] FS:
00007f4145513180(0000) GS:
ffff9cf10ea00000(0000) knlGS:
0000000000000000
[ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 97.807224] CR2:
0000000000000080 CR3:
00000003d7548000 CR4:
00000000003406f0
[ 97.807224] Call Trace:
[ 97.807224] drm_is_current_master+0x1a/0x30 [drm]
[ 97.807224] drm_master_release+0x3e/0x130 [drm]
[ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm]
[ 97.807224] drm_open+0x1ba/0x1e0 [drm]
[ 97.807224] drm_stub_open+0xaf/0xe0 [drm]
[ 97.807224] chrdev_open+0xa3/0x1b0
[ 97.807224] ? cdev_put.part.0+0x20/0x20
[ 97.807224] do_dentry_open+0x132/0x340
[ 97.807224] path_openat+0x2d1/0x14e0
[ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520
[ 97.807224] do_filp_open+0x93/0x100
[ 97.807224] ? __check_object_size+0x102/0x189
[ 97.807224] ? _raw_spin_unlock+0x16/0x30
[ 97.807224] do_sys_open+0x186/0x210
[ 97.807224] do_syscall_64+0x5b/0x170
[ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 97.807224] RIP: 0033:0x7f4147b07976
[ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44
[ 97.807224] RSP: 002b:
00007ffcced96ca0 EFLAGS:
00000293 ORIG_RAX:
0000000000000101
[ 97.807224] RAX:
ffffffffffffffda RBX:
00005619d5037f80 RCX:
00007f4147b07976
[ 97.807224] RDX:
0000000000000002 RSI:
00005619d46b969c RDI:
00000000ffffff9c
[ 98.040039] RBP:
0000000000000024 R08:
0000000000000000 R09:
0000000000000000
[ 98.040039] R10:
0000000000000000 R11:
0000000000000293 R12:
0000000000000024
[ 98.040039] R13:
0000000000000012 R14:
00005619d5035950 R15:
0000000000000012
[ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid
[ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler
[ 98.040039] CR2:
0000000000000080
[ 98.040039] ---[ end trace
3b65093b6fe62b2f ]---
[ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm]
[ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44
[ 98.040039] RSP: 0018:
ffffb8cf08e07bb0 EFLAGS:
00010202
[ 98.040039] RAX:
0000000000000000 RBX:
ffff9cf0f2586c00 RCX:
ffff9cf0f2586c88
[ 98.040039] RDX:
ffff9cf0ddbd8000 RSI:
0000000000000000 RDI:
0000000000000000
[ 98.040039] RBP:
ffff9cf1040e9800 R08:
0000000000000000 R09:
0000000000000000
[ 98.040039] R10:
ffffdeb30fd5d680 R11:
ffffdeb30f5d6808 R12:
ffff9cf1040e9888
[ 98.040039] R13:
0000000000000000 R14:
dead000000000200 R15:
ffff9cf0f2586cc8
[ 98.040039] FS:
00007f4145513180(0000) GS:
ffff9cf10ea00000(0000) knlGS:
0000000000000000
[ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 98.040039] CR2:
0000000000000080 CR3:
00000003d7548000 CR4:
00000000003406f0
Signed-off-by: Sergio Correia <sergio@correia.cc>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181122053329.2692-1-sergio@correia.cc
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sam Bobroff [Mon, 5 Nov 2018 05:57:47 +0000 (16:57 +1100)]
drm/ast: Fix incorrect free on ioregs
commit
dc25ab067645eabd037f1a23d49a666f9e0b8c68 upstream.
If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.
This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.
Fixes:
0dd68309b9c5 ("drm/ast: Try to use MMIO registers when PIO isn't supported")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Guralnik [Wed, 21 Nov 2018 13:03:54 +0000 (15:03 +0200)]
IB/mlx5: Avoid load failure due to unknown link width
commit
db7a691a1551a748cb92d9c89c6b190ea87e28d5 upstream.
If the firmware reports a connection width that is not 1x, 4x, 8x or 12x
it causes the driver to fail during initialization.
To prevent this failure every time a new width is introduced to the RDMA
stack, we will set a default 4x width for these widths which ar unknown to
the driver.
This is needed to allow to run old kernels with new firmware.
Cc: <stable@vger.kernel.org> # 4.1
Fixes:
1b5daf11b015 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry V. Levin [Wed, 21 Nov 2018 19:14:39 +0000 (22:14 +0300)]
mips: fix mips_get_syscall_arg o32 check
commit
c50cbd85cd7027d32ac5945bb60217936b4f7eaf upstream.
When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should
use the task specified as its argument instead of the current task.
This potentially affects all syscall_get_arguments() users
who specify tasks different from the current.
Fixes:
c0ff3c53d4f99 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/21185/
Cc: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mathias Kresin [Mon, 26 Nov 2018 10:25:40 +0000 (11:25 +0100)]
MIPS: ralink: Fix mt7620 nd_sd pinmux
commit
7d35baa4e9ec4b717bc0e58a39cdb6a1c50f5465 upstream.
In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are
configured as GPIOs. If they are blocked by the sd function, they can't
be used as GPIOs.
Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes:
f576fb6a0700 ("MIPS: ralink: cleanup the soc specific pinmux data")
Patchwork: https://patchwork.linux-mips.org/patch/21220/
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrea Parri [Thu, 22 Nov 2018 16:10:31 +0000 (17:10 +0100)]
uprobes: Fix handle_swbp() vs. unregister() + register() race once more
commit
09d3f015d1e1b4fee7e9bbdcf54201d239393391 upstream.
Commit:
142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb()
memory barriers, to ensure that handle_swbp() uses fully-initialized
uprobes only.
However, the smp_rmb() is mis-placed: this barrier should be placed
after handle_swbp() has tested for the flag, thus guaranteeing that
(program-order) subsequent loads from the uprobe can see the initial
stores performed by prepare_uprobe().
Move the smp_rmb() accordingly. Also amend the comments associated
to the two memory barriers to indicate their actual locations.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: stable@kernel.org
Fixes:
142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sagi Grimberg [Wed, 14 Nov 2018 18:17:01 +0000 (10:17 -0800)]
iser: set sector for ambiguous mr status errors
commit
24c3456c8d5ee6fc1933ca40f7b4406130682668 upstream.
If for some reason we failed to query the mr status, we need to make sure
to provide sufficient information for an ambiguous error (guard error on
sector 0).
Fixes:
0a7a08ad6f5f ("IB/iser: Implement check_protection")
Cc: <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Fri, 2 Feb 2018 14:59:40 +0000 (15:59 +0100)]
kdb: use memmove instead of overlapping memcpy
commit
2cf2f0d5b91fd1b06a6ae260462fc7945ea84add upstream.
gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so
we should really use memmove(), which is defined to handle that correctly:
In function 'memcpy',
inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4:
/git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict]
return __builtin_memcpy(p, q, size);
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 5 Sep 2017 07:33:32 +0000 (09:33 +0200)]
staging: rts5208: fix gcc-8 logic error warning
commit
58930cced012adb01bc78b3687049b17ef44d0a3 upstream.
As gcc-8 points out, the bit mask check makes no sense here:
drivers/staging/rts5208/sd.c: In function 'ext_sd_send_cmd_get_rsp':
drivers/staging/rts5208/sd.c:4130:25: error: bitwise comparison always evaluates to true [-Werror=tautological-compare]
However, the code is even more bogus, as we have already
checked for the SD_RSP_TYPE_R0 case earlier in the function
and returned success. As seen in the mmc/sd driver core,
SD_RSP_TYPE_R0 means "no response" anyway, so checking for
a particular response would not help either.
This just removes the nonsensical code to get rid of the
warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 4 Dec 2017 14:47:00 +0000 (15:47 +0100)]
scsi: bfa: convert to strlcpy/strlcat
commit
8c5a50e8e7ad812a62f7ccf28d9a5e74fddf3000 upstream.
The bfa driver has a number of real issues with string termination
that gcc-8 now points out:
drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr':
drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init':
drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init':
drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response':
drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id':
drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr':
drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build':
drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here
drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build':
drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]
In most cases, this can be addressed by correctly calling strlcpy and
strlcat instead of strncpy/strncat, with the size of the destination
buffer as the last argument.
For consistency, I'm changing the other callers of strncpy() in this
driver the same way.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 5 Sep 2017 07:47:26 +0000 (09:47 +0200)]
drm: gma500: fix logic error
commit
67a3b63a54cbe18944191f43d644686731cf30c7 upstream.
gcc-8 points out a condition that almost certainly doesn't
do what the author had in mind:
drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable':
drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
This changes it to a simple bit mask operation to check
whether the bit is set.
Fixes:
026abc333205 ("gma500: initial medfield merge")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905074741.435324-1-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sultan Alsawaf [Wed, 6 Jun 2018 22:56:54 +0000 (15:56 -0700)]
ip_tunnel: Fix name string concatenate in __ip_tunnel_create()
commit
000ade8016400d93b4d7c89970d96b8c14773d45 upstream.
By passing a limit of 2 bytes to strncat, strncat is limited to writing
fewer bytes than what it's supposed to append to the name here.
Since the bounds are checked on the line above this, just remove the string
bounds checks entirely since they're unneeded.
Signed-off-by: Sultan Alsawaf <sultanxda@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 1 Jul 2018 20:57:13 +0000 (13:57 -0700)]
kernfs: Replace strncpy with memcpy
commit
166126c1e54d927c2e8efa2702d420e0ce301fd9 upstream.
gcc 8.1.0 complains:
fs/kernfs/symlink.c:91:3: warning:
'strncpy' output truncated before terminating nul copying
as many bytes from a string as its length
fs/kernfs/symlink.c: In function 'kernfs_iop_get_link':
fs/kernfs/symlink.c:88:14: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Fri, 30 Nov 2018 22:45:01 +0000 (14:45 -0800)]
unifdef: use memcpy instead of strncpy
commit
38c7b224ce22c25fed04007839edf974bd13439d upstream.
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.
There was a comment about _why_ the code used strncpy - to avoid the
terminating NUL byte, but memcpy does the same and avoids the warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 27 Jun 2018 12:59:00 +0000 (14:59 +0200)]
ALSA: intel_hdmi: Use strlcpy() instead of strncpy()
commit
c288248f5b26cd5563112fcdc077bf44964a942d upstream.
hdmi_lpe_audio_probe() copies the pcm name string via strncpy(), but
as a gcc8 warning suggests, it misses a NUL terminator, and unlikely
the expected result.
Use the proper one, strlcpy() instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 1 Jul 2018 20:57:16 +0000 (13:57 -0700)]
kobject: Replace strncpy with memcpy
commit
77d2a24b6107bd9b3bf2403a65c1428a9da83dd0 upstream.
gcc 8.1.0 complains:
lib/kobject.c:128:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length [-Wstringop-truncation]
lib/kobject.c: In function 'kobject_get_path':
lib/kobject.c:125:13: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Fri, 30 Nov 2018 20:13:15 +0000 (12:13 -0800)]
test_hexdump: use memcpy instead of strncpy
commit
b1286ed7158e9b62787508066283ab0b8850b518 upstream.
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.
Apparently there was a patch for this floating around earlier, but it
got lost.
Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rothwell [Thu, 30 Aug 2018 21:47:28 +0000 (07:47 +1000)]
disable stringop truncation warnings for now
commit
217c3e0196758662aa0429863b09d1c13da1c5d6 upstream.
They are too noisy
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiongfeng Wang [Thu, 11 Jan 2018 09:22:29 +0000 (17:22 +0800)]
Kbuild: suppress packed-not-aligned warning for default setting only
commit
321cb0308a9e76841394b4bbab6a1107cfedbae0 upstream.
gcc-8 reports many -Wpacked-not-aligned warnings. The below are some
examples.
./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
} __attribute__ ((packed));
./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
} __attribute__ ((packed));
./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct
ceph_entity_addr' is less than 8 [-Wpacked-not-aligned]
} __attribute__ ((packed));
This patch suppresses this kind of warnings for default setting.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 5 Dec 2018 18:41:27 +0000 (19:41 +0100)]
Linux 4.14.86
Jaegeuk Kim [Fri, 28 Sep 2018 05:15:31 +0000 (22:15 -0700)]
f2fs: fix missing up_read
commit
89d13c38501df730cbb2e02c4499da1b5187119d upstream.
This patch fixes missing up_read call.
Fixes:
c9b60788fc76 ("f2fs: fix to do sanity check with block address in main area")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Fri, 27 Jul 2018 17:40:30 +0000 (19:40 +0200)]
libceph: check authorizer reply/challenge length before reading
commit
130f52f2b203aa0aec179341916ffb2e905f3afd upstream.
Avoid scribbling over memory if the received reply/challenge is larger
than the buffer supplied with the authorizer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Fri, 27 Jul 2018 17:45:36 +0000 (19:45 +0200)]
libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
commit
f1d10e04637924f2b00a0fecdd2ca4565f5cfc3f upstream.
Allow for extending ceph_x_authorize_reply in the future.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Todd Kjos [Tue, 6 Nov 2018 23:55:32 +0000 (15:55 -0800)]
binder: fix race that allows malicious free of live buffer
commit
7bada55ab50697861eee6bb7d60b41e68a961a9c upstream.
Malicious code can attempt to free buffers using the BC_FREE_BUFFER
ioctl to binder. There are protections against a user freeing a buffer
while in use by the kernel, however there was a window where
BC_FREE_BUFFER could be used to free a recently allocated buffer that
was not completely initialized. This resulted in a use-after-free
detected by KASAN with a malicious test program.
This window is closed by setting the buffer's allow_user_free attribute
to 0 when the buffer is allocated or when the user has previously freed
it instead of waiting for the caller to set it. The problem was that
when the struct buffer was recycled, allow_user_free was stale and set
to 1 allowing a free to go through.
Signed-off-by: Todd Kjos <tkjos@google.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Cc: stable <stable@vger.kernel.org> # 4.14
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Wed, 14 Nov 2018 01:57:03 +0000 (01:57 +0000)]
misc: mic/scif: fix copy-paste error in scif_create_remote_lookup
commit
6484a677294aa5d08c0210f2f387ebb9be646115 upstream.
gcc '-Wunused-but-set-variable' warning:
drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup':
drivers/misc/mic/scif/scif_rma.c:373:25: warning:
variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable]
'vmalloc_num_pages' should be used to determine if the address is
within the vmalloc range.
Fixes:
ba612aa8b487 ("misc: mic: SCIF memory registration and unregistration")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dexuan Cui [Mon, 26 Nov 2018 02:29:56 +0000 (02:29 +0000)]
Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl()
commit
eceb05965489784f24bbf4d61ba60e475a983016 upstream.
This is a longstanding issue: if the vmbus upper-layer drivers try to
consume too many GPADLs, the host may return with an error
0xC0000044 (STATUS_QUOTA_EXCEEDED), but currently we forget to check
the creation_status, and hence we can pass an invalid GPADL handle
into the OPEN_CHANNEL message, and get an error code 0xc0000225 in
open_info->response.open_result.status, and finally we hang in
vmbus_open() -> "goto error_free_info" -> vmbus_teardown_gpadl().
With this patch, we can exit gracefully on STATUS_QUOTA_EXCEEDED.
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Zhao [Fri, 30 Nov 2018 22:09:03 +0000 (14:09 -0800)]
mm: use swp_offset as key in shmem_replace_page()
commit
c1cb20d43728aa9b5393bd8d489bc85c142949b2 upstream.
We changed the key of swap cache tree from swp_entry_t.val to
swp_offset. We need to do so in shmem_replace_page() as well.
Hugh said:
"shmem_replace_page() has been wrong since the day I wrote it: good
enough to work on swap "type" 0, which is all most people ever use
(especially those few who need shmem_replace_page() at all), but
broken once there are any non-0 swp_type bits set in the higher order
bits"
Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com
Fixes:
f6ab1f7f6b2d ("mm, swap: use offset of swap entry as key of swap cache")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis Chamberlain [Fri, 30 Nov 2018 22:09:21 +0000 (14:09 -0800)]
lib/test_kmod.c: fix rmmod double free
commit
5618cf031fecda63847cafd1091e7b8bd626cdb1 upstream.
We free the misc device string twice on rmmod; fix this. Without this
we cannot remove the module without crashing.
Link: http://lkml.kernel.org/r/20181124050500.5257-1-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Kelly [Mon, 29 Oct 2018 03:18:53 +0000 (20:18 -0700)]
iio:st_magn: Fix enable device after trigger
commit
fe5192ac81ad0d4dfe1395d11f393f0513c15f7f upstream.
Currently, we enable the device before we enable the device trigger. At
high frequencies, this can cause interrupts that don't yet have a poll
function associated with them and are thus treated as spurious. At high
frequencies with level interrupts, this can even cause an interrupt storm
of repeated spurious interrupts (~100,000 on my Beagleboard with the
LSM9DS1 magnetometer). If these repeat too much, the interrupt will get
disabled and the device will stop functioning.
To prevent these problems, enable the device prior to enabling the device
trigger, and disable the divec prior to disabling the trigger. This means
there's no window of time during which the device creates interrupts but we
have no trigger to answer them.
Fixes:
90efe055629 ("iio: st_sensors: harden interrupt handling")
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Tested-by: Denis Ciocca <denis.ciocca@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe Balbi [Mon, 19 Nov 2018 06:34:04 +0000 (08:34 +0200)]
Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
commit
38317f5c0f2faae5110854f36edad810f841d62f upstream.
This reverts commit
ffb80fc672c3a7b6afd0cefcb1524fb99917b2f3.
Turns out that commit is wrong. Host controllers are allowed to use
Clear Feature HALT as means to sync data toggle between host and
periperal.
Cc: <stable@vger.kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Niewöhner [Sun, 25 Nov 2018 16:57:33 +0000 (17:57 +0100)]
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
commit
effd14f66cc1ef6701a19c5a56e39c35f4d395a5 upstream.
Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to
function correctly. This fixes a but where double pressing numlock locks
up the device completely with need to replug the keyboard.
Signed-off-by: Michael Niewöhner <linux@mniewoehner.de>
Tested-by: Michael Niewöhner <linux@mniewoehner.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kai-Heng Feng [Fri, 23 Nov 2018 08:42:19 +0000 (08:42 +0000)]
USB: usb-storage: Add new IDs to ums-realtek
commit
a84a1bcc992f0545a51d2e120b8ca2ef20e2ea97 upstream.
There are two new Realtek card readers require ums-realtek to work
correctly.
Add the new IDs to support them.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Fri, 9 Nov 2018 05:30:09 +0000 (23:30 -0600)]
staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station
commit
8561fb31a1f9594e2807681f5c0721894e367f19 upstream.
With Androidx86 8.1, wificond returns "failed to get
nl80211_sta_info_tx_failed" and wificondControl returns "Invalid signal
poll result from wificond". The fix is to OR sinfo->filled with
BIT_ULL(NL80211_STA_INFO_TX_FAILED).
This missing bit is apparently not needed with NetworkManager, but it
does no harm in that case.
Reported-and-Tested-by: youling257 <youling257@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: youling257 <youling257@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Wolsieffer [Sat, 3 Nov 2018 23:32:20 +0000 (19:32 -0400)]
staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION
commit
5a96b2d38dc054c0bbcbcd585b116566cbd877fe upstream.
The compatibility ioctl wrapper for VCHIQ_IOC_AWAIT_COMPLETION assumes that
the native ioctl always uses a message buffer and decrements msgbufcount.
Certain message types do not use a message buffer and in this case
msgbufcount is not decremented, and completion->header for the message is
NULL. Because the wrapper unconditionally decrements msgbufcount, the
calling process may assume that a message buffer has been used even when
it has not.
This results in a memory leak in the userspace code that interfaces with
this driver. When msgbufcount is decremented, the userspace code assumes
that the buffer can be freed though the reference in completion->header,
which cannot happen when the reference is NULL.
This patch causes the wrapper to only decrement msgbufcount when the
native ioctl decrements it. Note that we cannot simply copy the native
ioctl's value of msgbufcount, because the wrapper only retrieves messages
from the native ioctl one at a time, while userspace may request multiple
messages.
See https://github.com/raspberrypi/linux/pull/2703 for more discussion of
this patch.
Fixes:
5569a1260933 ("staging: vchiq_arm: Add compatibility wrappers for ioctls")
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Mon, 3 Dec 2018 11:06:57 +0000 (13:06 +0200)]
btrfs: release metadata before running delayed refs
We want to release the unused reservation we have since it refills the
delayed refs reserve, which will make everything go smoother when
running the delayed refs if we're short on our reservation.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Genoud [Tue, 27 Nov 2018 16:06:35 +0000 (17:06 +0100)]
dmaengine: at_hdmac: fix module unloading
commit
77e75fda94d2ebb86aa9d35fb1860f6395bf95de upstream.
of_dma_controller_free() was not called on module onloading.
This lead to a soft lockup:
watchdog: BUG: soft lockup - CPU#0 stuck for 23s!
Modules linked in: at_hdmac [last unloaded: at_hdmac]
when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate().
Cc: stable@vger.kernel.org
Fixes:
bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Richard Genoud [Tue, 27 Nov 2018 16:06:34 +0000 (17:06 +0100)]
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
commit
98f5f932254b88ce828bc8e4d1642d14e5854caa upstream.
The leak was found when opening/closing a serial port a great number of
time, increasing kmalloc-32 in slabinfo.
Each time the port was opened, dma_request_slave_channel() was called.
Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and
never freed. (Well, it was free at module unload, but that's not what we
want).
So, here, kzalloc is more suited for the job since it has to be freed in
atc_free_chan_resources().
Cc: stable@vger.kernel.org
Fixes:
bbe89c8e3d59 ("at_hdmac: move to generic DMA binding")
Reported-by: Mario Forner <m.forner@be4energy.com>
Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiko Stuebner [Sun, 18 Nov 2018 19:03:02 +0000 (20:03 +0100)]
ARM: dts: rockchip: Remove @0 from the veyron memory node
commit
672e60b72bbe7aace88721db55b380b6a51fb8f9 upstream.
The Coreboot version on veyron ChromeOS devices seems to ignore
memory@0 nodes when updating the available memory and instead
inserts another memory node without the address.
This leads to 4GB systems only ever be using 2GB as the memory@0
node takes precedence. So remove the @0 for veyron devices.
Fixes:
0b639b815f15 ("ARM: dts: rockchip: Add missing unit name to memory nodes in rk3288 boards")
Cc: stable@vger.kernel.org
Reported-by: Heikki Lindholm <holin@iki.fi>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Sun, 25 Nov 2018 00:58:02 +0000 (08:58 +0800)]
ext2: fix potential use after free
commit
ecebf55d27a11538ea84aee0be643dd953f830d5 upstream.
The function ext2_xattr_set calls brelse(bh) to drop the reference count
of bh. After that, bh may be freed. However, following brelse(bh),
it reads bh->b_data via macro HDR(bh). This may result in a
use-after-free bug. This patch moves brelse(bh) after reading field.
CC: stable@vger.kernel.org
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anisse Astier [Fri, 23 Nov 2018 16:59:11 +0000 (17:59 +0100)]
ALSA: hda/realtek - fix headset mic detection for MSI MS-B171
commit
8cd65271f8e545ddeed10ecc2e417936bdff168e upstream.
MSI Cubi N 8GL (MS-B171) needs the same fixup as its older model, the
MS-B120, in order for the headset mic to be properly detected.
They both use a single 3-way jack for both mic and headset with an
ALC283 codec, with the same pins used.
Cc: stable@vger.kernel.org
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>