net: hns3: clear VF down state bit before request link status

[ Upstream commit ed7bedd2c3ca040f1e8ea02c6590a93116b1ec78 ]

Currently, the VF down state bit is cleared after VF sending
link status request command. There is problem that when VF gets
link status replied from PF, the down state bit may still set
as 1. In this case, the link status replied from PF will be
ignored and always set VF link status to down.

To fix this problem, clear VF down state bit before VF requests
link status.

Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: increment the tmp aead refcnt before attaching it

[ Upstream commit 2a2403ca3add03f542f6b34bef9f74649969b06d ]

Li Shuang found a NULL pointer dereference crash in her testing:

  [] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
  [] RIP: 0010:tipc_crypto_rcv_complete+0xc8/0x7e0 [tipc]
  [] Call Trace:
  []  <IRQ>
  []  tipc_crypto_rcv+0x2d9/0x8f0 [tipc]
  []  tipc_rcv+0x2fc/0x1120 [tipc]
  []  tipc_udp_recv+0xc6/0x1e0 [tipc]
  []  udpv6_queue_rcv_one_skb+0x16a/0x460
  []  udp6_unicast_rcv_skb.isra.35+0x41/0xa0
  []  ip6_protocol_deliver_rcu+0x23b/0x4c0
  []  ip6_input+0x3d/0xb0
  []  ipv6_rcv+0x395/0x510
  []  __netif_receive_skb_core+0x5fc/0xc40

This is caused by NULL returned by tipc_aead_get(), and then crashed when
dereferencing it later in tipc_crypto_rcv_complete(). This might happen
when tipc_crypto_rcv_complete() is called by two threads at the same time:
the tmp attached by tipc_crypto_key_attach() in one thread may be released
by the one attached by that in the other thread.

This patch is to fix it by incrementing the tmp's refcnt before attaching
it instead of calling tipc_aead_get() after attaching it.

Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251x: fix support for half duplex SPI host controllers

[ Upstream commit 617085fca6375e2c1667d1fbfc6adc4034c85f04 ]

Some SPI host controllers do not support full-duplex SPI transfers.

The function mcp251x_spi_trans() does a full duplex transfer. It is
used in several places in the driver, where a TX half duplex transfer
is sufficient.

To fix support for half duplex SPI host controllers, this patch
introduces a new function mcp251x_spi_write() and changes all callers
that do a TX half duplex transfer to use mcp251x_spi_write().

Fixes: e0e25001d088 ("can: mcp251x: add support for half duplex controllers")
Link: https://lore.kernel.org/r/20210330100246.1074375-1-mkl@pengutronix.de
Cc: Tim Harvey <tharvey@gateworks.com>
Tested-By: Tim Harvey <tharvey@gateworks.com>
Reported-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: fix 11ax disabled bit in the regulatory capability flags

[ Upstream commit 07cc40fec9a85e669ea12e161a438d2cbd76f1ed ]

When version 2 of the regulatory capability flags API was implemented,
the flag to disable 11ax was defined as bit 13, but this was later
changed and the bit remained as bit 10, like in version 1.  This was
never changed in the driver, so we were checking for the wrong bit in
newer devices.  Fix it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fixes: e27c506a985c ("iwlwifi: regulatory: regulatory capabilities api change")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210326125611.6d28516b59cd.Id0248d5e4662695254f49ce37b0268834ed52918@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: designware: Adjust bus_freq_hz when refuse high speed mode set

[ Upstream commit 5e729bc54bda705f64941008b018b4e41a4322bf ]

When hardware doesn't support High Speed Mode, we forget bus_freq_hz
timing adjustment. This makes the timings and real registers being
unsynchronized. Adjust bus_freq_hz when refuse high speed mode set.

Fixes: b6e67145f149 ("i2c: designware: Enable high speed mode")
Reported-by: "Song Bao Hua (Barry Song)" <song.bao.hua@hisilicon.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

openvswitch: fix send of uninitialized stack memory in ct limit reply

[ Upstream commit 4d51419d49930be2701c2633ae271b350397c3ca ]

'struct ovs_zone_limit' has more members than initialized in
ovs_ct_limit_get_default_limit().  The rest of the memory is a random
kernel stack content that ends up being sent to userspace.

Fix that by using designated initializer that will clear all
non-specified fields.

Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: conntrack: simplify the return expression of ovs_ct_limit_get_default_limit()

[ Upstream commit 5e359044c107ecbdc2e9b3fd5ce296006e6de4bc ]

Simplify the return expression.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf inject: Fix repipe usage

[ Upstream commit 026334a3bb6a3919b42aba9fc11843db2b77fd41 ]

Since commit 14d3d54052539a1e ("perf session: Try to read pipe data from
file") 'perf inject' has started printing "PERFILE2h" when not processing
pipes.

The commit exposed perf to the possiblity that the input is not a pipe
but the 'repipe' parameter gets used. That causes the printing because
perf inject sets 'repipe' to true always.

The 'repipe' parameter of perf_session__new() is used by 2 functions:

- perf_file_header__read_pipe()
- trace_report()

In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is
true.

Fix by setting 'repipe' to true only if the output is a pipe.

Fixes: e558a5bd8b74aff4 ("perf inject: Work with files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andrew Vagin <avagin@openvz.org>
Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpcmd: fix inline assembly register clobbering

[ Upstream commit 7a2f91441b2c1d81b77c1cd816a4659f4abc9cbe ]

Register variables initialized using arithmetic. That leads to
kasan instrumentaton code corrupting the registers contents.
Follow GCC guidlines and use temporary variables for assigning
init values to register variables.

Fixes: 94c12cc7d196 ("[S390] Inline assembly cleanup.")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://gcc.gnu.org/onlinedocs/gcc-10.2.0/gcc/Local-Register-Variables.html
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

workqueue: Move the position of debug_work_activate() in __queue_work()

[ Upstream commit 0687c66b5f666b5ad433f4e94251590d9bc9d10e ]

The debug_work_activate() is called on the premise that
the work can be inserted, because if wq be in WQ_DRAINING
status, insert work may be failed.

Fixes: e41e704bc4f4 ("workqueue: improve destroy_workqueue() debuggability")
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fix invalid usage of list cursor in unregister

[ Upstream commit 7045465500e465b09f09d6e5bdc260a9f1aab97b ]

Fix invalid usage of a list_for_each_entry cursor in
clk_notifier_unregister(). When list is empty or if the list
is completely traversed (without breaking from the loop on one
of the entries) then the list cursor does not point to a valid
entry and therefore should not be used. The patch fixes a logical
bug that hasn't been seen in pratice however it is analogus
to the bug fixed in clk_notifier_register().

The issue was dicovered when running 5.12-rc1 kernel on x86_64
with KASAN enabled:
BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230
Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1

CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1
Hardware name: Google Caroline/Caroline,
BIOS Google_Caroline.7820.430.0 07/20/2018
Call Trace:
 dump_stack+0xee/0x15c
 print_address_description+0x1e/0x2dc
 kasan_report+0x188/0x1ce
 ? clk_notifier_register+0xab/0x230
 ? clk_prepare_lock+0x15/0x7b
 ? clk_notifier_register+0xab/0x230
 clk_notifier_register+0xab/0x230
 dw8250_probe+0xc01/0x10d4
 ...
 Memory state around the buggy address:
  ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00
  ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9
 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00
                          ^
  ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00
  ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00
  ==================================================================

Fixes: b2476490ef11 ("clk: introduce the common clock framework")
Reported-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Lukasz Bartosik <lb@semihalf.com>
Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fix invalid usage of list cursor in register

[ Upstream commit 8d3c0c01cb2e36b2bf3c06a82b18b228d0c8f5d0 ]

Fix invalid usage of a list_for_each_entry cursor in
clk_notifier_register(). When list is empty or if the list
is completely traversed (without breaking from the loop on one
of the entries) then the list cursor does not point to a valid
entry and therefore should not be used.

The issue was dicovered when running 5.12-rc1 kernel on x86_64
with KASAN enabled:
BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230
Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1

CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1
Hardware name: Google Caroline/Caroline,
BIOS Google_Caroline.7820.430.0 07/20/2018
Call Trace:
 dump_stack+0xee/0x15c
 print_address_description+0x1e/0x2dc
 kasan_report+0x188/0x1ce
 ? clk_notifier_register+0xab/0x230
 ? clk_prepare_lock+0x15/0x7b
 ? clk_notifier_register+0xab/0x230
 clk_notifier_register+0xab/0x230
 dw8250_probe+0xc01/0x10d4
...
Memory state around the buggy address:
 ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00
 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9
>ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00
                      ^
 ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00
 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00
 ==================================================================

Fixes: b2476490ef11 ("clk: introduce the common clock framework")
Reported-by: Lukasz Majczak <lma@semihalf.com>
Signed-off-by: Lukasz Bartosik <lb@semihalf.com>
Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: restore cmp registers on resume path

[ Upstream commit a14d273ba15968495896a38b7b3399dba66d0270 ]

Restore CMP screener registers on resume path.

Fixes: c1e85c6ce57ef ("net: macb: save/restore the remaining registers and features")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: cls_api: Fix uninitialised struct field bo->unlocked_driver_cb

[ Upstream commit 990b03b05b2fba79de2a1ee9dc359fc552d95ba6 ]

The 'unlocked_driver_cb' struct field in 'bo' is not being initialized
in tcf_block_offload_init(). The uninitialized 'unlocked_driver_cb'
will be used when calling unlocked_driver_cb(). So initialize 'bo' to
zero to avoid the issue.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs

[ Upstream commit 4b42d557a8add52b9a9924fb31e40a218aab7801 ]

In __ufshcd_issue_tm_cmd(), it is not correct to use hba->nutrs + req->tag
as the Task Tag in a TMR UPIU. Directly use req->tag as the Task Tag.

Fixes: e293313262d3 ("scsi: ufs: Fix broken task management command implementation")
Link: https://lore.kernel.org/r/1617262750-4864-3-git-send-email-cang@codeaurora.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Fix task management request completion timeout

[ Upstream commit 1235fc569e0bf541ddda0a1224d4c6fa6d914890 ]

ufshcd_tmc_handler() calls blk_mq_tagset_busy_iter(fn = ufshcd_compl_tm()),
but since blk_mq_tagset_busy_iter() only iterates over all reserved tags
and requests which are not in IDLE state, ufshcd_compl_tm() never gets a
chance to run. Thus, TMR always ends up with completion timeout. Fix it by
calling blk_mq_start_request() in __ufshcd_issue_tm_cmd().

Link: https://lore.kernel.org/r/1617262750-4864-2-git-send-email-cang@codeaurora.org
Fixes: 69a6c269c097 ("scsi: ufs: Use blk_{get,put}_request() to allocate and free TMFs")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: forbit mcast-related sockopt on MPTCP sockets

[ Upstream commit 86581852d7710990d8af9dadfe9a661f0abf2114 ]

Unrolling mcast state at msk dismantel time is bug prone, as
syzkaller reported:

======================================================
WARNING: possible circular locking dependency detected
5.11.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor905/8822 is trying to acquire lock:
ffffffff8d678fe8 (rtnl_mutex){+.+.}-{3:3}, at: ipv6_sock_mc_close+0xd7/0x110 net/ipv6/mcast.c:323

but task is already holding lock:
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1600 [inline]
ffff888024390120 (sk_lock-AF_INET6){+.+.}-{0:0}, at: mptcp6_release+0x57/0x130 net/mptcp/protocol.c:3507

which lock already depends on the new lock.

Instead we can simply forbit any mcast-related setsockopt

Fixes: 717e79c867ca5 ("mptcp: Add setsockopt()/getsockopt() socket operations")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: udp: Add support for getsockopt(..., ..., UDP_GRO, ..., ...);

[ Upstream commit 98184612aca0a9ee42b8eb0262a49900ee9eef0d ]

Support for UDP_GRO was added in the past but the implementation for
getsockopt was missed which did lead to an error when we tried to
retrieve the setting for UDP_GRO. This patch adds the missing switch
case for UDP_GRO

Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Signed-off-by: Norman Maurer <norman_maurer@apple.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Set drvdata to NULL when msm_drm_init() fails

[ Upstream commit 5620b135aea49a8f41c86aaecfcb1598a7774121 ]

We should set the platform device's driver data to NULL here so that
code doesn't assume the struct drm_device pointer is valid when it could
have been destroyed. The lifetime of this pointer is managed by a kref
but when msm_drm_init() fails we call drm_dev_put() on the pointer which
will free the pointer's memory. This driver uses the component model, so
there's sort of two "probes" in this file, one for the platform device
i.e. msm_pdev_probe() and one for the component i.e. msm_drm_bind(). The
msm_drm_bind() code is using the platform device's driver data to store
struct drm_device so the two functions are intertwined.

This relationship becomes a problem for msm_pdev_shutdown() when it
tests the NULL-ness of the pointer to see if it should call
drm_atomic_helper_shutdown(). The NULL test is a proxy check for if the
pointer has been freed by kref_put(). If the drm_device has been
destroyed, then we shouldn't call the shutdown helper, and we know that
is the case if msm_drm_init() failed, therefore set the driver data to
NULL so that this pointer liveness is tracked properly.

Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Message-Id: <20210325212822.3663144-1-swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rtrs-clt: Close rtrs client conn before destroying rtrs clt session files

[ Upstream commit 7582207b1059129e59eb92026fca2cfc088a74fc ]

KASAN detected the following BUG:

  BUG: KASAN: use-after-free in rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
  Read of size 8 at addr ffff88bf2fb4adc0 by task swapper/0/0

  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O      5.4.84-pserver #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10
  Hardware name: Supermicro H8QG6/H8QG6, BIOS 3.00       09/04/2012
  Call Trace:
   <IRQ>
   dump_stack+0x96/0xe0
   print_address_description.constprop.4+0x1f/0x300
   ? irq_work_claim+0x2e/0x50
   __kasan_report.cold.8+0x78/0x92
   ? rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
   kasan_report+0x10/0x20
   rtrs_clt_update_wc_stats+0x41/0x100 [rtrs_client]
   rtrs_clt_rdma_done+0xb1/0x760 [rtrs_client]
   ? lockdep_hardirqs_on+0x1a8/0x290
   ? process_io_rsp+0xb0/0xb0 [rtrs_client]
   ? mlx4_ib_destroy_cq+0x100/0x100 [mlx4_ib]
   ? add_interrupt_randomness+0x1a2/0x340
   __ib_process_cq+0x97/0x100 [ib_core]
   ib_poll_handler+0x41/0xb0 [ib_core]
   irq_poll_softirq+0xe0/0x260
   __do_softirq+0x127/0x672
   irq_exit+0xd1/0xe0
   do_IRQ+0xa3/0x1d0
   common_interrupt+0xf/0xf
   </IRQ>
  RIP: 0010:cpuidle_enter_state+0xea/0x780
  Code: 31 ff e8 99 48 47 ff 80 7c 24 08 00 74 12 9c 58 f6 c4 02 0f 85 53 05 00 00 31 ff e8 b0 6f 53 ff e8 ab 4f 5e ff fb 8b 44 24 04 <85> c0 0f 89 f3 01 00 00 48 8d 7b 14 e8 65 1e 77 ff c7 43 14 00 00
  RSP: 0018:ffffffffab007d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffca
  RAX: 0000000000000002 RBX: ffff88b803d69800 RCX: ffffffffa91a8298
  RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffffffffab021414
  RBP: ffffffffab6329e0 R08: 0000000000000002 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002
  R13: 000000bf39d82466 R14: ffffffffab632aa0 R15: ffffffffab632ae0
   ? lockdep_hardirqs_on+0x1a8/0x290
   ? cpuidle_enter_state+0xe5/0x780
   cpuidle_enter+0x3c/0x60
   do_idle+0x2fb/0x390
   ? arch_cpu_idle_exit+0x40/0x40
   ? schedule+0x94/0x120
   cpu_startup_entry+0x19/0x1b
   start_kernel+0x5da/0x61b
   ? thread_stack_cache_init+0x6/0x6
   ? load_ucode_amd_bsp+0x6f/0xc4
   ? init_amd_microcode+0xa6/0xa6
   ? x86_family+0x5/0x20
   ? load_ucode_bsp+0x182/0x1fd
   secondary_startup_64+0xa4/0xb0

  Allocated by task 5730:
   save_stack+0x19/0x80
   __kasan_kmalloc.constprop.9+0xc1/0xd0
   kmem_cache_alloc_trace+0x15b/0x350
   alloc_sess+0xf4/0x570 [rtrs_client]
   rtrs_clt_open+0x3b4/0x780 [rtrs_client]
   find_and_get_or_create_sess+0x649/0x9d0 [rnbd_client]
   rnbd_clt_map_device+0xd7/0xf50 [rnbd_client]
   rnbd_clt_map_device_store+0x4ee/0x970 [rnbd_client]
   kernfs_fop_write+0x141/0x240
   vfs_write+0xf3/0x280
   ksys_write+0xba/0x150
   do_syscall_64+0x68/0x270
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

  Freed by task 5822:
   save_stack+0x19/0x80
   __kasan_slab_free+0x125/0x170
   kfree+0xe7/0x3f0
   kobject_put+0xd3/0x240
   rtrs_clt_destroy_sess_files+0x3f/0x60 [rtrs_client]
   rtrs_clt_close+0x3c/0x80 [rtrs_client]
   close_rtrs+0x45/0x80 [rnbd_client]
   rnbd_client_exit+0x10f/0x2bd [rnbd_client]
   __x64_sys_delete_module+0x27b/0x340
   do_syscall_64+0x68/0x270
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

When rtrs_clt_close is triggered, it iterates over all the present
rtrs_clt_sess and triggers close on them. However, the call to
rtrs_clt_destroy_sess_files is done before the rtrs_clt_close_conns. This
is incorrect since during the initialization phase we allocate
rtrs_clt_sess first, and then we go ahead and create rtrs_clt_con for it.

If we free the rtrs_clt_sess structure before closing the rtrs_clt_con, it
may so happen that an inflight IO completion would trigger the function
rtrs_clt_rdma_done, which would lead to the above UAF case.

Hence close the rtrs_clt_con connections first, and then trigger the
destruction of session files.

Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210325153308.1214057-12-gi-oh.kim@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix display statistics for veb_tc

[ Upstream commit c3214de929dbf1b7374add8bbed30ce82b197bbb ]

If veb-stats was enabled, the ethtool stats triggered a warning
due to invalid size: 'unexpected stat size for veb.tc_%u_tx_packets'.
This was due to an incorrect structure definition for the statistics.
Structures and functions have been improved in line with requirements
for the presentation of statistics, in particular for the functions:
'i40e_add_ethtool_stats' and 'i40e_add_stat_strings'.

Fixes: 1510ae0be2a4 ("i40e: convert VEB TC stats to use an i40e_stats array")
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc/fsl: qbman: fix conflicting alignment attributes

[ Upstream commit 040f31196e8b2609613f399793b9225271b79471 ]

When building with W=1, gcc points out that the __packed attribute
on struct qm_eqcr_entry conflicts with the 8-byte alignment
attribute on struct qm_fd inside it:

drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned]

I assume that the alignment attribute is the correct one, and
that qm_eqcr_entry cannot actually be unaligned in memory,
so add the same alignment on the outer struct.

Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory model

[ Upstream commit 622d13694b5f048c01caa7ba548498d9880d4cb0 ]

xdp_return_frame() may be called outside of NAPI context to return
xdpf back to page_pool. xdp_return_frame() calls __xdp_return() with
napi_direct = false. For page_pool memory model, __xdp_return() calls
xdp_return_frame_no_direct() unconditionally and below false negative
kernel BUG throw happened under preempt-rt build:

[  430.450355] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/3884
[  430.451678] caller is __xdp_return+0x1ff/0x2e0
[  430.452111] CPU: 0 PID: 3884 Comm: modprobe Tainted: G     U      E     5.12.0-rc2+ #45

Changes in v2:
 - This patch fixes the issue by making xdp_return_frame_no_direct() is
   only called if napi_direct = true, as recommended for better by
   Jesper Dangaard Brouer. Thanks!

Fixes: 2539650fadbf ("xdp: Helpers for disabling napi_direct of xdp_return_frame")
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/rds: Fix a use after free in rds_message_map_pages

[ Upstream commit bdc2ab5c61a5c07388f4820ff21e787b4dfd1ced ]

In rds_message_map_pages, the rm is freed by rds_message_put(rm).
But rm is still used by rm->data.op_sg in return value.

My patch assigns ERR_CAST(rm->data.op_sg) to err before the rm is
freed to avoid the uaf.

Fixes: 7dba92037baf3 ("net/rds: Use ERR_PTR for rds_message_alloc_sgs()")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Don't request more than supported EQs

[ Upstream commit a7b76002ae78cd230ee652ccdfedf21aa94fcecc ]

Calculating the number of compeltion EQs based on the number of
available IRQ vectors doesn't work now that all async EQs share one IRQ.
Thus the max number of EQs can be exceeded on systems with more than
approximately 256 CPUs. Take this into account when calculating the
number of available completion EQs.

Fixes: 81bfa206032a ("net/mlx5: Use a single IRQ for all async EQs")
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix ethtool indication of connector type

[ Upstream commit 3211434dfe7a66fcf55e43961ea524b78336c04c ]

Use connector_type read from PTYS register when it's valid, based on
corresponding capability bit.

Fixes: 5b4793f81745 ("net/mlx5e: Add support for reading connector type from PTYS")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: Fix mapping of ct_label zero

[ Upstream commit d24f847e54214049814b9515771622eaab3f42ab ]

ct_label 0 is a default label each flow has and therefore
there can be rules that match on ct_label=0 without a prior
rule that set the ct_label to this value.

The ct_label value is not used directly in the HW rules and
instead it is mapped to some id within a defined range and this
id is used to set and match the metadata register which carries
the ct_label.

If we have a rule that matches on ct_label=0, the hw rule will
perform matching on a value that is != 0 because of the mapping
from label to id. Since the metadata register default value is
0 and it was never set before to anything else by an action that
sets the ct_label, there will always be a mismatch between that
register and the value in the rule.

To support such rule, a forced mapping of ct_label 0 to id=0
is done so that it will match the metadata register default
value of 0.

Fixes: 54b154ecfb8c ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: sunxi: sun4i-codec: fill ASoC card owner

[ Upstream commit 7c0d6e482062eb5c06ecccfab340abc523bdca00 ]

card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:

WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G         C  E     5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
 (snd_card_new [snd])
 (snd_soc_bind_card [snd_soc_core])
 (snd_soc_register_card [snd_soc_core])
 (sun4i_codec_probe [sun4i_codec])

Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ffb4 ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0cb ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

I2C: JZ4780: Fix bug for Ingenic X1000.

[ Upstream commit 942bfbecc0281c75db84f744b9b77b0f2396f484 ]

Only send "X1000_I2C_DC_STOP" when last byte, or it will cause
error when I2C write operation which should look like this:

device_addr + w, reg_addr, data;

But without this patch, it looks like this:

device_addr + w, reg_addr, device_addr + w, data;

Fixes: 21575a7a8d4c ("I2C: JZ4780: Add support for the X1000.")
Reported-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn>
Tested-by: 杨文龙 (Yang Wenlong) <ywltyut@sina.cn>
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: broadcom: Only advertise EEE for supported modes

[ Upstream commit c056d480b40a68f2520ccc156c7fae672d69d57d ]

We should not be advertising EEE for modes that we do not support,
correct that oversight by looking at the PHY device supported linkmodes.

Fixes: 99cec8a4dda2 ("net: phy: broadcom: Allow enabling or disabling of EEE")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfp: flower: ignore duplicate merge hints from FW

[ Upstream commit 2ea538dbee1c79f6f6c24a6f2f82986e4b7ccb78 ]

A merge hint message needs some time to process before the merged
flow actually reaches the firmware, during which we may get duplicate
merge hints if there're more than one packet that hit the pre-merged
flow. And processing duplicate merge hints will cost extra host_ctx's
which are a limited resource.

Avoid the duplicate merge by using hash table to store the sub_flows
to be merged.

Fixes: 8af56f40e53b ("nfp: flower: offload merge flows")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: Fix memory leak on qrtr_tx_wait failure

[ Upstream commit 8a03dd925786bdc3834d56ccc980bb70668efa35 ]

qrtr_tx_wait does not check for radix_tree_insert failure, causing
the 'flow' object to be unreferenced after qrtr_tx_wait return. Fix
that by releasing flow on radix_tree_insert failure.

Fixes: 5fdeb0d372ab ("net: qrtr: Implement outgoing flow control")
Reported-by: syzbot+739016799a89c530b32a@syzkaller.appspotmail.com
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/ncsi: Avoid channel_monitor hrtimer deadlock

[ Upstream commit 03cb4d05b4ea9a3491674ca40952adb708d549fa ]

Calling ncsi_stop_channel_monitor from channel_monitor is a guaranteed
deadlock on SMP because stop calls del_timer_sync on the timer that
invoked channel_monitor as its timer function.

Recognise the inherent race of marking the monitor disabled before
deleting the timer by just returning if enable was cleared.  After
a timeout (the default case -- reset to START when response received)
just mark the monitor.enabled false.

If the channel has an entry on the channel_queue list, or if the
state is not ACTIVE or INACTIVE, then warn and mark the timer stopped
and don't restart, as the locking is broken somehow.

Fixes: 0795fb2021f0 ("net/ncsi: Stop monitor if channel times out or is inactive")
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces

[ Upstream commit f57011e72f5fe0421ec7a812beb1b57bdf4bb47f ]

Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.

Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module")
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net:tipc: Fix a double free in tipc_sk_mcast_rcv

[ Upstream commit 6bf24dc0cc0cc43b29ba344b66d78590e687e046 ]

In the if(skb_peek(arrvq) == skb) branch, it calls __skb_dequeue(arrvq) to get
the skb by skb = skb_peek(arrvq). Then __skb_dequeue() unlinks the skb from arrvq
and returns the skb which equals to skb_peek(arrvq). After __skb_dequeue(arrvq)
finished, the skb is freed by kfree_skb(__skb_dequeue(arrvq)) in the first time.

Unfortunately, the same skb is freed in the second time by kfree_skb(skb) after
the branch completed.

My patch removes kfree_skb() in the if(skb_peek(arrvq) == skb) branch, because
this skb will be freed by kfree_skb(skb) finally.

Fixes: cb1b728096f54 ("tipc: eliminate race condition at multicast reception")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: avoid collecting SGE_QBASE regs during traffic

[ Upstream commit 1bfb3dea965ff9f6226fd1709338f227363b6061 ]

Accessing SGE_QBASE_MAP[0-3] and SGE_QBASE_INDEX registers can lead
to SGE missing doorbells under heavy traffic. So, only collect them
when adapter is idle. Also update the regdump range to skip collecting
these registers.

Fixes: 80a95a80d358 ("cxgb4: collect SGE PF/VF queue map")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: dsa: Fix type was not set for devlink port

[ Upstream commit fb6ec87f7229b92baa81b35cbc76f2626d5bfadb ]

If PHY is not available on DSA port (described at devicetree but absent or
failed to detect) then kernel prints warning after 3700 secs:

[ 3707.948771] ------------[ cut here ]------------
[ 3707.948784] Type was not set for devlink port.
[ 3707.948894] WARNING: CPU: 1 PID: 17 at net/core/devlink.c:8097 0xc083f9d8

We should unregister the devlink port as a user port and
re-register it as an unused port before executing "continue" in case of
dsa_port_setup error.

Fixes: 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal")
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gianfar: Handle error code at MAC address change

[ Upstream commit bff5b62585123823842833ab20b1c0a7fa437f8c ]

Handle return error code of eth_mac_addr();

Fixes: 3d23a05c75c7 ("gianfar: Enable changing mac addr when if up")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ethernet: myri10ge: Fix a use after free in myri10ge_sw_tso

[ Upstream commit 63415767a2446136372e777cde5bb351f21ec21d ]

In myri10ge_sw_tso, the skb_list_walk_safe macro will set
(curr) = (segs) and (next) = (curr)->next. If status!=0 is true,
the memory pointed by curr and segs will be free by dev_kfree_skb_any(curr).
But later, the segs is used by segs = segs->next and causes a uaf.

As (next) = (curr)->next, my patch replaces seg->next to next.

Fixes: 536577f36ff7a ("net: myri10ge: use skb_list_walk_safe helper for gso segments")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum: Fix ECN marking in tunnel decapsulation

[ Upstream commit 66167c310deb4ac1725f81004fb4b504676ad0bf ]

Cited commit changed the behavior of the software data path with regards
to the ECN marking of decapsulated packets. However, the commit did not
change other callers of __INET_ECN_decapsulate(), namely mlxsw. The
driver is using the function in order to ensure that the hardware and
software data paths act the same with regards to the ECN marking of
decapsulated packets.

The discrepancy was uncovered by commit 5aa3c334a449 ("selftests:
forwarding: vxlan_bridge_1d: Fix vxlan ecn decapsulate value") that
aligned the selftest to the new behavior. Without this patch the
selftest passes when used with veth pairs, but fails when used with
mlxsw netdevs.

Fix this by instructing the device to propagate the ECT(1) mark from the
outer header to the inner header when the inner header is ECT(0), for
both NVE and IP-in-IP tunnels.

A helper is added in order not to duplicate the code between both tunnel
types.

Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: isotp: fix msg_namelen values depending on CAN_REQUIRED_SIZE

[ Upstream commit f522d9559b07854c231cf8f0b8cb5a3578f8b44e ]

Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939
members") the sockaddr_can has been extended in size and a new
CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol
specific needed size.

The ABI for the msg_name and msg_namelen has not been adapted to the
new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to
a problem when an existing binary reads the (increased) struct
sockaddr_can in msg_name.

Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Reported-by: Richard Weinberger <richard@nod.at>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t
Link: https://lore.kernel.org/r/20210325125850.1620-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: bcm/raw: fix msg_namelen values depending on CAN_REQUIRED_SIZE

[ Upstream commit 9e9714742fb70467464359693a73b911a630226f ]

Since commit f5223e9eee65 ("can: extend sockaddr_can to include j1939
members") the sockaddr_can has been extended in size and a new
CAN_REQUIRED_SIZE macro has been introduced to calculate the protocol
specific needed size.

The ABI for the msg_name and msg_namelen has not been adapted to the
new CAN_REQUIRED_SIZE macro for the other CAN protocols which leads to
a problem when an existing binary reads the (increased) struct
sockaddr_can in msg_name.

Fixes: f5223e9eee65 ("can: extend sockaddr_can to include j1939 members")
Reported-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Acked-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Link: https://lore.kernel.org/linux-can/1135648123.112255.1616613706554.JavaMail.zimbra@nod.at/T/#t
Link: https://lore.kernel.org/r/20210325125850.1620-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Provide private skb extensions for segmented and hw offloaded ESP packets

[ Upstream commit c7dbf4c08868d9db89b8bfe8f8245ca61b01ed2f ]

Commit 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec
crypto offload.") added a XFRM_XMIT flag to avoid duplicate ESP trailer
insertion on HW offload. This flag is set on the secpath that is shared
amongst segments. This lead to a situation where some segments are
not transformed correctly when segmentation happens at layer 3.

Fix this by using private skb extensions for segmented and hw offloaded
ESP packets.

Fixes: 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0

[ Upstream commit 5cfad4f45806f6f898b63b8c77cea7452c704cb3 ]

Fix address of the pad control register
(IOMUXC_SW_PAD_CTL_PAD_SD1_DATA0) for SD1_DATA0_GPIO2_IO2.  This seems
to be a typo but it leads to an exception when pinctrl is applied due to
wrong memory address access.

Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: c1c9d41319c3 ("dt-bindings: imx: Add pinctrl binding doc for imx8mm")
Fixes: 748f908cc882 ("arm64: add basic DTS for i.MX8MQ")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit

[ Upstream commit 1b479fb801602b22512f53c19b1f93a4fc5d5d9d ]

In pvc_xmit, if __skb_pad(skb, pad, false) failed, it will free
the skb in the first time and goto drop. But the same skb is freed
by kfree_skb(skb) in the second time in drop.

Maintaining the original function unchanged, my patch adds a new
label out to avoid the double free if __skb_pad() failed.

Fixes: f5083d0cee08a ("drivers/net/wan/hdlc_fr: Improvements to the code of pvc_xmit")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sch_red: fix off-by-one checks in red_check_params()

[ Upstream commit 3a87571f0ffc51ba3bf3ecdb6032861d0154b164 ]

This fixes following syzbot report:

UBSAN: shift-out-of-bounds in ./include/net/red.h:237:23
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 1 PID: 8418 Comm: syz-executor170 Not tainted 5.12.0-rc4-next-20210324-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x141/0x1d7 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327
 red_set_parms include/net/red.h:237 [inline]
 choke_change.cold+0x3c/0xc8 net/sched/sch_choke.c:414
 qdisc_create+0x475/0x12f0 net/sched/sch_api.c:1247
 tc_modify_qdisc+0x4c8/0x1a50 net/sched/sch_api.c:1663
 rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:674
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43f039
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdfa725168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000400488 RCX: 000000000043f039
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000004
RBP: 0000000000403020 R08: 0000000000400488 R09: 0000000000400488
R10: 0000000000400488 R11: 0000000000000246 R12: 00000000004030b0
R13: 0000000000000000 R14: 00000000004ac018 R15: 0000000000400488

Fixes: 8afa10cbe281 ("net_sched: red: Avoid illegal values")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

geneve: do not modify the shared tunnel info when PMTU triggers an ICMP reply

[ Upstream commit 68c1a943ef37bafde5ea2383e8ca224c7169ee31 ]

When the interface is part of a bridge or an Open vSwitch port and a
packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When
using the external mode (collect metadata) the source and destination
addresses are reversed, so that Open vSwitch can match the packet
against an existing (reverse) flow.

But inverting the source and destination addresses in the shared
ip_tunnel_info will make following packets of the flow to use a wrong
destination address (packets will be tunnelled to itself), if the flow
isn't updated. Which happens with Open vSwitch, until the flow times
out.

Fixes this by uncloning the skb's ip_tunnel_info before inverting its
source and destination addresses, so that the modification will only be
made for the PTMU packet, not the following ones.

Fixes: c1a800e88dbf ("geneve: Support for PMTU discovery on directly bridged links")
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vxlan: do not modify the shared tunnel info when PMTU triggers an ICMP reply

[ Upstream commit 30a93d2b7d5a7cbb53ac19c9364a256d1aa6c08a ]

When the interface is part of a bridge or an Open vSwitch port and a
packet exceed a PMTU estimate, an ICMP reply is sent to the sender. When
using the external mode (collect metadata) the source and destination
addresses are reversed, so that Open vSwitch can match the packet
against an existing (reverse) flow.

But inverting the source and destination addresses in the shared
ip_tunnel_info will make following packets of the flow to use a wrong
destination address (packets will be tunnelled to itself), if the flow
isn't updated. Which happens with Open vSwitch, until the flow times
out.

Fixes this by uncloning the skb's ip_tunnel_info before inverting its
source and destination addresses, so that the modification will only be
made for the PTMU packet, not the following ones.

Fixes: fc68c99577cc ("vxlan: Support for PMTU discovery on directly bridged links")
Tested-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: Update DMA coherency values

[ Upstream commit d75135082698140a26a56defe1bbc1b06f26a41f ]

Based on the IOMMU configuration, the current cache control settings can
result in possible coherency issues. The hardware team has recommended
new settings for the PCI device path to eliminate the issue.

Fixes: 6f595959c095 ("amd-xgbe: Adjust register settings to improve performance")
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hostfs: fix memory handling in follow_link()

[ Upstream commit 7f6c411c9b50cfab41cc798e003eff27608c7016 ]

1) argument should not be freed in any case - the caller already has
it as ->s_fs_info (and uses it a lot afterwards)
2) allocate readlink buffer with kmalloc() - the caller has no way
to tell if it's got that (on absolute symlink) or a result of
kasprintf().  Sure, for SLAB and SLUB kfree() works on results of
kmem_cache_alloc(), but that's not documented anywhere, might change
in the future *and* is already not true for SLOB.

Fixes: 52b209f7b848 ("get rid of hostfs_read_inode()")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix kernel oops when i40e driver removes VF's

[ Upstream commit 347b5650cd158d1d953487cc2bec567af5c5bf96 ]

Fix the reason of kernel oops when i40e driver removed VFs.
Added new __I40E_VFS_RELEASING state to signalize releasing
process by PF, that it makes possible to exit of reset VF procedure.
Without this patch, it is possible to suspend the VFs reset by
releasing VFs resources procedure. Retrying the reset after the
timeout works on the freed VF memory causing a kernel oops.

Fixes: d43d60e5eb95 ("i40e: ensure reset occurs when disabling VF")
Signed-off-by: Eryk Rybak <eryk.roch.rybak@intel.com>
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Added Asym_Pause to supported link modes

[ Upstream commit 90449e98c265296329446c7abcd2aae3b20c0bc9 ]

Add Asym_Pause to supported link modes (it is supported by HW).
Lack of Asym_Pause in supported modes can cause several problems,
i.e. it won't be possible to turn the autonegotiation on
with asymmetric pause settings (i.e. Tx on, Rx off).

Fixes: 4e91bcd5d47a ("i40e: Finish implementation of ethtool get settings")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtchnl: Fix layout of RSS structures

[ Upstream commit 22f8b5df881e9f1302514bbbbbb8649c2051de55 ]

Remove padding from RSS structures. Previous layout
could lead to unwanted compiler optimizations
in loops when iterating over key and lut arrays.

Fixes: 65ece6de0114 ("virtchnl: Add missing explicit padding to structures")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Fix NULL pointer dereference on policy lookup

[ Upstream commit b1e3a5607034aa0a481c6f69a6893049406665fb ]

When xfrm interfaces are used in combination with namespaces
and ESP offload, we get a dst_entry NULL pointer dereference.
This is because we don't have a dst_entry attached in the ESP
offloading case and we need to do a policy lookup before the
namespace transition.

Fix this by expicit checking of skb_dst(skb) before accessing it.

Fixes: f203b76d78092 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8960: Fix wrong bclk and lrclk with pll enabled for some chips

[ Upstream commit 16b82e75c15a7dbd564ea3654f3feb61df9e1e6f ]

The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.

>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.

So search available sysclk_divs from 2 to 1 other than from 1 to 2.

Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: HDA: fix core status verification

[ Upstream commit 927280909fa7d8e61596800d82f18047c6cfbbe4 ]

When checking for enabled cores it isn't enough to check that
some of the requested cores are running, we have to check that
all of them are.

Fixes: 747503b1813a ("ASoC: SOF: Intel: Add Intel specific HDA DSP HW operations")
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210322163728.16616-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

esp: delete NETIF_F_SCTP_CRC bit from features for esp offload

[ Upstream commit 154deab6a3ba47792936edf77f2f13a1cbc4351d ]

Now in esp4/6_gso_segment(), before calling inner proto .gso_segment,
NETIF_F_CSUM_MASK bits are deleted, as HW won't be able to do the
csum for inner proto due to the packet encrypted already.

So the UDP/TCP packet has to do the checksum on its own .gso_segment.
But SCTP is using CRC checksum, and for that NETIF_F_SCTP_CRC should
be deleted to make SCTP do the csum in own .gso_segment as well.

In Xiumei's testing with SCTP over IPsec/veth, the packets are kept
dropping due to the wrong CRC checksum.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: xfrm: Localize sequence counter per network namespace

[ Upstream commit e88add19f68191448427a6e4eb059664650a837f ]

A sequence counter write section must be serialized or its internal
state can get corrupted. The "xfrm_state_hash_generation" seqcount is
global, but its write serialization lock (net->xfrm.xfrm_state_lock) is
instantiated per network namespace. The write protection is thus
insufficient.

To provide full protection, localize the sequence counter per network
namespace instead. This should be safe as both the seqcount read and
write sections access data exclusively within the network namespace. It
also lays the foundation for transforming "xfrm_state_hash_generation"
data type from seqcount_t to seqcount_LOCKNAME_t in further commits.

Fixes: b65e3d7be06f ("xfrm: state: add sequence count to detect hash resizes")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP4: PM: update ROM return address for OSWR and OFF

[ Upstream commit b3d09a06d89f474cb52664e016849315a97e09d9 ]

We need to add a dummy smc call to the cpuidle wakeup path to force the
ROM code to save the return address after MMU is enabled again. This is
needed to prevent random hangs on secure devices like droid4.

Otherwise the system will eventually hang when entering deeper SoC idle
states with the core and mpu domains in open-switch retention (OSWR).
The hang happens as the ROM code tries to use the earlier physical return
address set by omap-headsmp.S with MMU off while waking up CPU1 again.

The hangs started happening in theory already with commit caf8c87d7ff2
("ARM: OMAP2+: Allow core oswr for omap4"), but in practise the issue went
unnoticed as various drivers were often blocking any deeper idle states
with hardware autoidle features.

This patch is based on an earlier TI Linux kernel tree commit 92f0b3028d9e
("OMAP4: PM: update ROM return address for OSWR and OFF") written by
Carlos Leija <cileija@ti.com>, Praneeth Bajjuri <praneeth@ti.com>, and
Bryan Buckley <bryan.buckley@ti.com>. A later version of the patch was
updated to use CPU_PM notifiers by Tero Kristo <t-kristo@ti.com>.

Signed-off-by: Carlos Leija <cileija@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Bryan Buckley <bryan.buckley@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Fixes: caf8c87d7ff2 ("ARM: OMAP2+: Allow core oswr for omap4")
Reported-by: Carl Philipp Klemm <philipp@uvos.xyz>
Reported-by: Merlijn Wajer <merlijn@wizzup.org>
Cc: Ivan Jelincic <parazyd@dyne.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <kristo@kernel.org>
[tony@atomide.com: updated to apply, updated description]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: OMAP4: Fix PMIC voltage domains for bionic

[ Upstream commit 30916faa1a6009122e10d0c42338b8db44a36fde ]

We are now registering the mpu domain three times instead of registering
mpu, core and iva domains like we should.

Fixes: d44fa156dcb2 ("ARM: OMAP2+: Configure voltage controller for cpcap")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: bd9571mwv: Fix AVS and DVFS voltage range

[ Upstream commit 3b6e7088afc919f5b52e4d2de8501ad34d35b09b ]

According to Table 30 ("DVFS_MoniVDAC [6:0] Setting Table") in the
BD9571MWV-M Datasheet Rev. 002, the valid voltage range is 600..1100 mV
(settings 0x3c..0x6e).  While the lower limit is taken into account (by
setting regulator_desc.linear_min_sel to 0x3c), the upper limit is not.

Fix this by reducing regulator_desc.n_voltages from 0x80 to 0x6f.

Fixes: e85c5a153fe237f2 ("regulator: Add ROHM BD9571MWV-M PMIC regulator driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210312130242.3390038-2-geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom: pil_info: avoid 64-bit division

[ Upstream commit 7029e783027706b427bbfbdf8558252c1dac6fa0 ]

On 32-bit machines with 64-bit resource_size_t, the driver causes
a link failure because of the 64-bit division:

arm-linux-gnueabi-ld: drivers/remoteproc/qcom_pil_info.o: in function `qcom_pil_info_store':
qcom_pil_info.c:(.text+0x1ec): undefined reference to `__aeabi_uldivmod'

Add a cast to an u32 to avoid this. If the resource exceeds 4GB,
there are bigger problems.

Fixes: 549b67da660d ("remoteproc: qcom: Introduce helper to store pil info in IMEM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210103135628.3702427-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: Use actual socket sk instead of skb socket for xfrm_output_resume

[ Upstream commit 9ab1265d52314fce1b51e8665ea6dbc9ac1a027c ]

A situation can occur where the interface bound to the sk is different
to the interface bound to the sk attached to the skb. The interface
bound to the sk is the correct one however this information is lost inside
xfrm_output2 and instead the sk on the skb is used in xfrm_output_resume
instead. This assumes that the sk bound interface and the bound interface
attached to the sk within the skb are the same which can lead to lookup
failures inside ip_route_me_harder resulting in the packet being dropped.

We have an l2tp v3 tunnel with ipsec protection. The tunnel is in the
global VRF however we have an encapsulated dot1q tunnel interface that
is within a different VRF. We also have a mangle rule that marks the
packets causing them to be processed inside ip_route_me_harder.

Prior to commit 31c70d5956fc ("l2tp: keep original skb ownership") this
worked fine as the sk attached to the skb was changed from the dot1q
encapsulated interface to the sk for the tunnel which meant the interface
bound to the sk and the interface bound to the skb were identical.
Commit 46d6c5ae953c ("netfilter: use actual socket sk rather than skb sk
when routing harder") fixed some of these issues however a similar
problem existed in the xfrm code.

Fixes: 31c70d5956fc ("l2tp: keep original skb ownership")
Signed-off-by: Evan Nimmo <evan.nimmo@alliedtelesis.co.nz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: interface: fix ipv4 pmtu check to honor ip header df

[ Upstream commit 8fc0e3b6a8666d656923d214e4dc791e9a17164a ]

Frag needed should only be sent if the header enables DF.

This fix allows packets larger than MTU to pass the xfrm interface
and be fragmented after encapsulation, aligning behavior with
non-interface xfrm.

Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Recognize 860 as iSCSI port in CEE mode

[ Upstream commit aeac8ce864d9c0836e12ed5b5cc80f62f3cccb7c ]

iSCSI can use both TCP ports 860 and 3260. However, in our current
implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command
doesn't provide a way to communicate the protocol port number to the
AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the
AQ's caller layer.

Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to
determine which port number that iSCSI will use.

Fixes: 0ebd3ff13cca ("ice: Add code for DCB initialization part 2/4")
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Refactor DCB related variables out of the ice_port_info struct

[ Upstream commit fc2d1165d4a424dd325ae1f45806565350a58013 ]

Refactor the DCB related variables out of the ice_port_info_struct. The
goal is to make the ice_port_info struct cleaner.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Co-developed-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: fix err handler in tcf_action_init()

[ Upstream commit b3650bf76a32380d4d80a3e21b5583e7303f216c ]

With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.

Reproduction:

$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
                      action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1

        action order 0: Simple <"2">
         index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple             20480  -1

Fix the issue by modifying module reference counting handling in action
initialization code:

- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.

- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.

- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.

Fixes: d349f9976868 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: preserve pending TLB flush across calls to kvm_tdp_mmu_zap_sp

[ Upstream commit 315f02c60d9425b38eb8ad7f21b8a35e40db23f9 ]

Right now, if a call to kvm_tdp_mmu_zap_sp returns false, the caller
will skip the TLB flush, which is wrong.  There are two ways to fix
it:

- since kvm_tdp_mmu_zap_sp will not yield and therefore will not flush
  the TLB itself, we could change the call to kvm_tdp_mmu_zap_sp to
  use "flush |= ..."

- or we can chain the flush argument through kvm_tdp_mmu_zap_sp down
  to __kvm_tdp_mmu_zap_gfn_range.  Note that kvm_tdp_mmu_zap_sp will
  neither yield nor flush, so flush would never go from true to
  false.

This patch does the former to simplify application to stable kernels,
and to make it further clearer that kvm_tdp_mmu_zap_sp will not flush.

Cc: seanjc@google.com
Fixes: 048f49809c526 ("KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping")
Cc: <stable@vger.kernel.org> # 5.10.x: 048f49809c: KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
Cc: <stable@vger.kernel.org> # 5.10.x: 33a3164161: KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
Cc: <stable@vger.kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages

[ Upstream commit 33a3164161fc86b9cc238f7f2aa2ccb1d5559b1c ]

Prevent the TDP MMU from yielding when zapping a gfn range during NX
page recovery.  If a flush is pending from a previous invocation of the
zapping helper, either in the TDP MMU or the legacy MMU, but the TDP MMU
has not accumulated a flush for the current invocation, then yielding
will release mmu_lock with stale TLB entries.

That being said, this isn't technically a bug fix in the current code, as
the TDP MMU will never yield in this case.  tdp_mmu_iter_cond_resched()
will yield if and only if it has made forward progress, as defined by the
current gfn vs. the last yielded (or starting) gfn.  Because zapping a
single shadow page is guaranteed to (a) find that page and (b) step
sideways at the level of the shadow page, the TDP iter will break its loop
before getting a chance to yield.

But that is all very, very subtle, and will break at the slightest sneeze,
e.g. zapping while holding mmu_lock for read would break as the TDP MMU
wouldn't be guaranteed to see the present shadow page, and thus could step
sideways at a lower level.

Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-4-seanjc@google.com>
[Add lockdep assertion. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping

[ Upstream commit 048f49809c526348775425420fb5b8e84fd9a133 ]

Honor the "flush needed" return from kvm_tdp_mmu_zap_gfn_range(), which
does the flush itself if and only if it yields (which it will never do in
this particular scenario), and otherwise expects the caller to do the
flush.  If pages are zapped from the TDP MMU but not the legacy MMU, then
no flush will occur.

Fixes: 29cf0f5007a2 ("kvm: x86/mmu: NX largepage recovery for TDP MMU")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-3-seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap

[ Upstream commit a835429cda91621fca915d80672a157b47738afb ]

When flushing a range of GFNs across multiple roots, ensure any pending
flush from a previous root is honored before yielding while walking the
tables of the current root.

Note, kvm_tdp_mmu_zap_gfn_range() now intentionally overwrites its local
"flush" with the result to avoid redundant flushes.  zap_gfn_range()
preserves and return the incoming "flush", unless of course the flush was
performed prior to yielding and no new flush was triggered.

Fixes: 1af4a96025b3 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed")
Cc: stable@vger.kernel.org
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210325200119.1359384-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed

[ Upstream commit 1af4a96025b33587ca953c7ef12a1b20c6e70412 ]

Given certain conditions, some TDP MMU functions may not yield
reliably / frequently enough. For example, if a paging structure was
very large but had few, if any writable entries, wrprot_gfn_range
could traverse many entries before finding a writable entry and yielding
because the check for yielding only happens after an SPTE is modified.

Fix this issue by moving the yield to the beginning of the loop.

Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Reviewed-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-15-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Ensure forward progress when yielding in TDP MMU iter

[ Upstream commit ed5e484b79e8a9b8be714bd85b6fc70bd6dc99a7 ]

In some functions the TDP iter risks not making forward progress if two
threads livelock yielding to one another. This is possible if two threads
are trying to execute wrprot_gfn_range. Each could write protect an entry
and then yield. This would reset the tdp_iter's walk over the paging
structure and the loop would end up repeating the same entry over and
over, preventing either thread from making forward progress.

Fix this issue by only yielding if the loop has made forward progress
since the last yield.

Fixes: a6a0b05da9f3 ("kvm: x86/mmu: Support dirty logging for the TDP MMU")
Reviewed-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-14-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Rename goal_gfn to next_last_level_gfn

[ Upstream commit 74953d3530280dc53256054e1906f58d07bfba44 ]

The goal_gfn field in tdp_iter can be misleading as it implies that it
is the iterator's final goal. It is really a target for the lowest gfn
mapped by the leaf level SPTE the iterator will traverse towards. Change
the field's name to be more precise.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-13-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: Merge flush and non-flush tdp_mmu_iter_cond_resched

[ Upstream commit e139a34ef9d5627a41e1c02210229082140d1f92 ]

The flushing and non-flushing variants of tdp_mmu_iter_cond_resched have
almost identical implementations. Merge the two functions and add a
flush parameter.

Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-12-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/mmu: change TDP MMU yield function returns to match cond_resched

[ Upstream commit e28a436ca4f65384cceaf3f4da0e00aa74244e6a ]

Currently the TDP MMU yield / cond_resched functions either return
nothing or return true if the TLBs were not flushed. These are confusing
semantics, especially when making control flow decisions in calling
functions.

To clean things up, change both functions to have the same
return value semantics as cond_resched: true if the thread yielded,
false if it did not. If the function yielded in the _flush_ version,
then the TLBs will have been flushed.

Reviewed-by: Peter Feiner <pfeiner@google.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: turn recovery error on init to debug

commit e409a6a3e0690efdef9b8a96197bc61ff117cfaf upstream.

In some configurations, recovery is optional. So, don't throw an error
when it is not used because e.g. pinctrl settings for recovery are not
provided. Reword the message and make it debug output.

Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: make pcpu_nr_empty_pop_pages per chunk type

commit 0760fa3d8f7fceeea508b98899f1c826e10ffe78 upstream.

nr_empty_pop_pages is used to guarantee that there are some free
populated pages to satisfy atomic allocations. Accounted and
non-accounted allocations are using separate sets of chunks,
so both need to have a surplus of empty pages.

This commit makes pcpu_nr_empty_pop_pages and the corresponding logic
per chunk type.

[Dennis]
This issue came up as I was reviewing [1] and realized I missed this.
Simultaneously, it was reported btrfs was seeing failed atomic
allocations in fsstress tests [2] and [3].

[1] https://lore.kernel.org/linux-mm/20210324190626.564297-1-guro@fb.com/
[2] https://lore.kernel.org/linux-mm/20210401185158.3275.409509F4@e16-tech.com/
[3] https://lore.kernel.org/linux-mm/CAL3q7H5RNBjCi708GH7jnczAOe0BLnacT9C+OBgA-Dx9jhB6SQ@mail.gmail.com/

Fixes: 3c7be18ac9a0 ("mm: memcg/percpu: account percpu memory to memory cgroups")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Roman Gushchin <guro@fb.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: iscsi: Fix zero tag inside a trace event

commit 0352c3d3959a6cf543075b88c7e662fd3546f12e upstream.

target_sequencer_start event is triggered inside target_cmd_init_cdb().
se_cmd.tag is not initialized with ITT at the moment so the event always
prints zero tag.

Link: https://lore.kernel.org/r/20210403215415.95077-1-r.bolshakov@yadro.com
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: pm80xx: Fix chip initialization failure

commit 65df7d1986a1909a0869419919e7d9c78d70407e upstream.

Inbound and outbound queues were not properly configured and that lead to
MPI configuration failure.

Fixes: 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues")
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/r/20210402054212.17834-1-Viswas.G@microchip.com.com
Reported-and-tested-by: Ash Izat <ash@ai0.uk>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: Fix locking bug in deferred_probe_timeout_work_func()

commit eed6e41813deb9ee622cd9242341f21430d7789f upstream.

list_for_each_entry_safe() is only useful if we are deleting nodes in a
linked list within the loop. It doesn't protect against other threads
adding/deleting nodes to the list in parallel. We need to grab
deferred_probe_mutex when traversing the deferred_probe_pending_list.

Cc: stable@vger.kernel.org
Fixes: 25b4e70dcce9 ("driver core: allow stopping deferred probe after init")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210402040342.2944858-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: synchronize event handler with sysfs code paths

commit 363eaa3a450abb4e63bd6e3ad79d1f7a0f717814 upstream.

Fuzzing uncovered race condition between sysfs code paths in usbip
drivers. Device connect/disconnect code paths initiated through
sysfs interface are prone to races if disconnect happens during
connect and vice versa.

Use sysfs_lock to synchronize event handler with sysfs paths
in usbip drivers.

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/c5c8723d3f29dfe3d759cfaafa7dd16b0dfe2918.1616807117.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: vudc synchronize sysfs code paths

commit bd8b82042269a95db48074b8bb400678dbac1815 upstream.

Fuzzing uncovered race condition between sysfs code paths in usbip
drivers. Device connect/disconnect code paths initiated through
sysfs interface are prone to races if disconnect happens during
connect and vice versa.

Use sysfs_lock to protect sysfs paths in vudc.

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/caabcf3fc87bdae970509b5ff32d05bb7ce2fb15.1616807117.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: stub-dev synchronize sysfs code paths

commit 9dbf34a834563dada91366c2ac266f32ff34641a upstream.

Fuzzing uncovered race condition between sysfs code paths in usbip
drivers. Device connect/disconnect code paths initiated through
sysfs interface are prone to races if disconnect happens during
connect and vice versa.

Use sysfs_lock to protect sysfs paths in stub-dev.

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/2b182f3561b4a065bf3bf6dce3b0e9944ba17b3f.1616807117.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: add sysfs_lock to synchronize sysfs code paths

commit 4e9c93af7279b059faf5bb1897ee90512b258a12 upstream.

Fuzzing uncovered race condition between sysfs code paths in usbip
drivers. Device connect/disconnect code paths initiated through
sysfs interface are prone to races if disconnect happens during
connect and vice versa.

This problem is common to all drivers while it can be reproduced easily
in vhci_hcd. Add a sysfs_lock to usbip_device struct to protect the paths.

Use this in vhci_hcd to protect sysfs paths. For a complete fix, usip_host
and usip-vudc drivers and the event handler will have to use this lock to
protect the paths. These changes will be done in subsequent patches.

Cc: stable@vger.kernel.org
Reported-and-tested-by: syzbot+a93fba6d384346a761e3@syzkaller.appspotmail.com
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/b6568f7beae702bbc236a545d3c020106ca75eac.1616807117.git.skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Fix off by one in tb_port_find_retimer()

commit 08fe7ae1857080f5075df5ac7fef2ecd4e289117 upstream.

This array uses 1-based indexing so it corrupts memory one element
beyond of the array.  Fix it by making the array one element larger.

Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thunderbolt: Fix a leak in tb_retimer_add()

commit bec4d7c93afc07dd0454ae41c559513f858cfb83 upstream.

After the device_register() succeeds, then the correct way to clean up
is to call device_unregister().  The unregister calls both device_del()
and device_put().  Since this code was only device_del() it results in
a memory leak.

Fixes: dacb12877d92 ("thunderbolt: Add support for on-board retimers")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: let skb_orphan_partial wake-up waiters.

commit 9adc89af724f12a03b47099cd943ed54e877cd59 upstream.

Currently the mentioned helper can end-up freeing the socket wmem
without waking-up any processes waiting for more write memory.

If the partially orphaned skb is attached to an UDP (or raw) socket,
the lack of wake-up can hang the user-space.

Even for TCP sockets not calling the sk destructor could have bad
effects on TSQ.

Address the issue using skb_orphan to release the sk wmem before
setting the new sock_efree destructor. Additionally bundle the
whole ownership update in a new helper, so that later other
potential users could avoid duplicate code.

v1 -> v2:
 - use skb_orphan() instead of sort of open coding it (Eric)
 - provide an helper for the ownership change (Eric)

Fixes: f6ba8d33cfbb ("netem: fix skb_orphan_partial()")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net-ipv6: bugfix - raw & sctp - switch to ipv6_can_nonlocal_bind()

commit 630e4576f83accf90366686f39808d665d8dbecc upstream.

Found by virtue of ipv6 raw sockets not honouring the per-socket
IP{,V6}_FREEBIND setting.

Based on hits found via:
  git grep '[.]ip_nonlocal_bind'
We fix both raw ipv6 sockets to honour IP{,V6}_FREEBIND and IP{,V6}_TRANSPARENT,
and we fix sctp sockets to honour IP{,V6}_TRANSPARENT (they already honoured
FREEBIND), and not just the ipv6 'ip_nonlocal_bind' sysctl.

The helper is defined as:
  static inline bool ipv6_can_nonlocal_bind(struct net *net, struct inet_sock *inet) {
    return net->ipv6.sysctl.ip_nonlocal_bind || inet->freebind || inet->transparent;
  }
so this change only widens the accepted opt-outs and is thus a clean bugfix.

I'm not entirely sure what 'fixes' tag to add, since this is AFAICT an ancient bug,
but IMHO this should be applied to stable kernels as far back as possible.
As such I'm adding a 'fixes' tag with the commit that originally added the helper,
which happened in 4.19.  Backporting to older LTS kernels (at least 4.9 and 4.14)
would presumably require open-coding it or backporting the helper as well.

Other possibly relevant commits:
  v4.18-rc6-1502-g83ba4645152d net: add helpers checking if socket can be bound to nonlocal address
  v4.18-rc6-1431-gd0c1f01138c4 net/ipv6: allow any source address for sendmsg pktinfo with ip_nonlocal_bind
  v4.14-rc5-271-gb71d21c274ef sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
  v4.7-rc7-1883-g9b9742022888 sctp: support ipv6 nonlocal bind
  v4.1-12247-g35a256fee52c ipv6: Nonlocal bind

Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 83ba4645152d ("net: add helpers checking if socket can be bound to nonlocal address")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: hsr: Reset MAC header for Tx path

commit 9d6803921a16f4d768dc41a75375629828f4d91e upstream.

Reset MAC header in HSR Tx path. This is needed, because direct packet
transmission, e.g. by specifying PACKET_QDISC_BYPASS does not reset the MAC
header.

This has been observed using the following setup:

|$ ip link add name hsr0 type hsr slave1 lan0 slave2 lan1 supervision 45 version 1
|$ ifconfig hsr0 up
|$ ./test hsr0

The test binary is using mmap'ed sockets and is specifying the
PACKET_QDISC_BYPASS socket option.

This patch resolves the following warning on a non-patched kernel:

|[  112.725394] ------------[ cut here ]------------
|[  112.731418] WARNING: CPU: 1 PID: 257 at net/hsr/hsr_forward.c:560 hsr_forward_skb+0x484/0x568
|[  112.739962] net/hsr/hsr_forward.c:560: Malformed frame (port_src hsr0)

The warning can be safely removed, because the other call sites of
hsr_forward_skb() make sure that the skb is prepared correctly.

Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix TXQ AC confusion

commit 1153a74768a9212daadbb50767aa400bc6a0c9b0 upstream.

Normally, TXQs have

  txq->tid = tid;
  txq->ac = ieee80211_ac_from_tid(tid);

However, the special management TXQ actually has

  txq->tid = IEEE80211_NUM_TIDS; // 16
  txq->ac = IEEE80211_AC_VO;

This makes sense, but ieee80211_ac_from_tid(16) is the same
as ieee80211_ac_from_tid(0) which is just IEEE80211_AC_BE.

Now, normally this is fine. However, if the netdev queues
were stopped, then the code in ieee80211_tx_dequeue() will
propagate the stop from the interface (vif->txqs_stopped[])
if the AC 2 (ieee80211_ac_from_tid(txq->tid)) is marked as
stopped. On wake, however, __ieee80211_wake_txqs() will wake
the TXQ if AC 0 (txq->ac) is woken up.

If a driver stops all queues with ieee80211_stop_tx_queues()
and then wakes them again with ieee80211_wake_tx_queues(),
the ieee80211_wake_txqs() tasklet will run to resync queue
and TXQ state. If all queues were woken, then what'll happen
is that _ieee80211_wake_txqs() will run in order of HW queues
0-3, typically (and certainly for iwlwifi) corresponding to
ACs 0-3, so it'll call __ieee80211_wake_txqs() for each AC in
order 0-3.

When __ieee80211_wake_txqs() is called for AC 0 (VO) that'll
wake up the management TXQ (remember its tid is 16), and the
driver's wake_tx_queue() will be called. That tries to get a
frame, which will immediately *stop* the TXQ again, because
now we check against AC 2, and AC 2 hasn't yet been marked as
woken up again in sdata->vif.txqs_stopped[] since we're only
in the __ieee80211_wake_txqs() call for AC 0.

Thus, the management TXQ will never be started again.

Fix this by checking txq->ac directly instead of calculating
the AC as ieee80211_ac_from_tid(txq->tid).

Fixes: adf8ed01e4fd ("mac80211: add an optional TXQ for other PS-buffered frames")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210323210500.bf4d50afea4a.I136ffde910486301f8818f5442e3c9bf8670a9c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix time-is-after bug in mlme

commit 7d73cd946d4bc7d44cdc5121b1c61d5d71425dea upstream.

The incorrect timeout check caused probing to happen when it did
not need to happen.  This in turn caused tx performance drop
for around 5 seconds in ath10k-ct driver.  Possibly that tx drop
is due to a secondary issue, but fixing the probe to not happen
when traffic is running fixes the symptom.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Fixes: 9abf4e49830d ("mac80211: optimize station connection monitor")
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210330230749.14097-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cfg80211: check S1G beacon compat element length

commit b5ac0146492fc5c199de767e492be8a66471011a upstream.

We need to check the length of this element so that we don't
access data beyond its end. Fix that.

Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Link: https://lore.kernel.org/r/20210408142826.f6f4525012de.I9fdeff0afdc683a6024e5ea49d2daa3cd2459d11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: fix potential leak of ACL params

commit abaf94ecc9c356d0b885a84edef4905cdd89cfdd upstream.

In case nl80211_parse_unsol_bcast_probe_resp() results in an
error, need to "goto out" instead of just returning to free
possibly allocated data.

Fixes: 7443dcd1f171 ("nl80211: Unsolicited broadcast probe response support")
Link: https://lore.kernel.org/r/20210408142833.d8bc2e2e454a.If290b1ba85789726a671ff0b237726d4851b5b0f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: fix beacon head validation

commit 9a6847ba1747858ccac53c5aba3e25c54fbdf846 upstream.

If the beacon head attribute (NL80211_ATTR_BEACON_HEAD)
is too short to even contain the frame control field,
we access uninitialized data beyond the buffer. Fix this
by checking the minimal required size first. We used to
do this until S1G support was added, where the fixed
data portion has a different size.

Reported-and-tested-by: syzbot+72b99dcf4607e8c770f3@syzkaller.appspotmail.com
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 1d47f1198d58 ("nl80211: correctly validate S1G beacon head")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20210408154518.d9b06d39b4ee.Iff908997b2a4067e8d456b3cb96cab9771d252b8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: fix action overwrite reference counting

commit 87c750e8c38bce706eb32e4d8f1e3402f2cebbd4 upstream.

Action init code increments reference counter when it changes an action.
This is the desired behavior for cls API which needs to obtain action
reference for every classifier that points to action. However, act API just
needs to change the action and releases the reference before returning.
This sequence breaks when the requested action doesn't exist, which causes
act API init code to create new action with specified index, but action is
still released before returning and is deleted (unless it was referenced
concurrently by cls API).

Reproduction:

$ sudo tc actions ls action gact
$ sudo tc actions change action gact drop index 1
$ sudo tc actions ls action gact

Extend tcf_action_init() to accept 'init_res' array and initialize it with
action->ops->init() result. In tcf_action_add() remove pointers to created
actions from actions array before passing it to tcf_action_put_many().

Fixes: cae422f379f3 ("net: sched: use reference counting action init")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sched: sch_teql: fix null-pointer dereference

commit 1ffbc7ea91606e4abd10eb60de5367f1c86daf5e upstream.

Reproduce:

  modprobe sch_teql
  tc qdisc add dev teql0 root teql0

This leads to (for instance in Centos 7 VM) OOPS:

[  532.366633] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[  532.366733] IP: [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[  532.366825] PGD 80000001376d5067 PUD 137e37067 PMD 0
[  532.366906] Oops: 0000 [#1] SMP
[  532.366987] Modules linked in: sch_teql ...
[  532.367945] CPU: 1 PID: 3026 Comm: tc Kdump: loaded Tainted: G               ------------ T 3.10.0-1062.7.1.el7.x86_64 #1
[  532.368041] Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.2 04/01/2014
[  532.368125] task: ffff8b7d37d31070 ti: ffff8b7c9fdbc000 task.ti: ffff8b7c9fdbc000
[  532.368224] RIP: 0010:[<ffffffffc06124a8>]  [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[  532.368320] RSP: 0018:ffff8b7c9fdbf8e0  EFLAGS: 00010286
[  532.368394] RAX: ffffffffc0612490 RBX: ffff8b7cb1565e00 RCX: ffff8b7d35ba2000
[  532.368476] RDX: ffff8b7d35ba2000 RSI: 0000000000000000 RDI: ffff8b7cb1565e00
[  532.368557] RBP: ffff8b7c9fdbf8f8 R08: ffff8b7d3fd1f140 R09: ffff8b7d3b001600
[  532.368638] R10: ffff8b7d3b001600 R11: ffffffff84c7d65b R12: 00000000ffffffd8
[  532.368719] R13: 0000000000008000 R14: ffff8b7d35ba2000 R15: ffff8b7c9fdbf9a8
[  532.368800] FS:  00007f6a4e872740(0000) GS:ffff8b7d3fd00000(0000) knlGS:0000000000000000
[  532.368885] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  532.368961] CR2: 00000000000000a8 CR3: 00000001396ee000 CR4: 00000000000206e0
[  532.369046] Call Trace:
[  532.369159]  [<ffffffff84c8192e>] qdisc_create+0x36e/0x450
[  532.369268]  [<ffffffff846a9b49>] ? ns_capable+0x29/0x50
[  532.369366]  [<ffffffff849afde2>] ? nla_parse+0x32/0x120
[  532.369442]  [<ffffffff84c81b4c>] tc_modify_qdisc+0x13c/0x610
[  532.371508]  [<ffffffff84c693e7>] rtnetlink_rcv_msg+0xa7/0x260
[  532.372668]  [<ffffffff84907b65>] ? sock_has_perm+0x75/0x90
[  532.373790]  [<ffffffff84c69340>] ? rtnl_newlink+0x890/0x890
[  532.374914]  [<ffffffff84c8da7b>] netlink_rcv_skb+0xab/0xc0
[  532.376055]  [<ffffffff84c63708>] rtnetlink_rcv+0x28/0x30
[  532.377204]  [<ffffffff84c8d400>] netlink_unicast+0x170/0x210
[  532.378333]  [<ffffffff84c8d7a8>] netlink_sendmsg+0x308/0x420
[  532.379465]  [<ffffffff84c2f3a6>] sock_sendmsg+0xb6/0xf0
[  532.380710]  [<ffffffffc034a56e>] ? __xfs_filemap_fault+0x8e/0x1d0 [xfs]
[  532.381868]  [<ffffffffc034a75c>] ? xfs_filemap_fault+0x2c/0x30 [xfs]
[  532.383037]  [<ffffffff847ec23a>] ? __do_fault.isra.61+0x8a/0x100
[  532.384144]  [<ffffffff84c30269>] ___sys_sendmsg+0x3e9/0x400
[  532.385268]  [<ffffffff847f3fad>] ? handle_mm_fault+0x39d/0x9b0
[  532.386387]  [<ffffffff84d88678>] ? __do_page_fault+0x238/0x500
[  532.387472]  [<ffffffff84c31921>] __sys_sendmsg+0x51/0x90
[  532.388560]  [<ffffffff84c31972>] SyS_sendmsg+0x12/0x20
[  532.389636]  [<ffffffff84d8dede>] system_call_fastpath+0x25/0x2a
[  532.390704]  [<ffffffff84d8de21>] ? system_call_after_swapgs+0xae/0x146
[  532.391753] Code: 00 00 00 00 00 00 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b b7 48 01 00 00 48 89 fb <48> 8b 8e a8 00 00 00 48 85 c9 74 43 48 89 ca eb 0f 0f 1f 80 00
[  532.394036] RIP  [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[  532.395127]  RSP <ffff8b7c9fdbf8e0>
[  532.396179] CR2: 00000000000000a8

Null pointer dereference happens on master->slaves dereference in
teql_destroy() as master is null-pointer.

When qdisc_create() calls teql_qdisc_init() it imediately fails after
check "if (m->dev == dev)" because both devices are teql0, and it does
not set qdisc_priv(sch)->m leaving it zero on error path, then
qdisc_create() imediately calls teql_destroy() which does not expect
zero master pointer and we get OOPS.

Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vdpa/mlx5: Fix suspend/resume index restoration

commit bc04d93ea30a0a8eb2a2648b848cef35d1f6f798 upstream.

When we suspend the VM, the VDPA interface will be reset. When the VM is
resumed again, clear_virtqueues() will clear the available and used
indices resulting in hardware virqtqueue objects becoming out of sync.
We can avoid this function alltogether since qemu will clear them if
required, e.g. when the VM went through a reboot.

Moreover, since the hw available and used indices should always be
identical on query and should be restored to the same value same value
for virtqueues that complete in order, we set the single value provided
by set_vq_state(). In get_vq_state() we return the value of hardware
used index.

Fixes: b35ccebe3ef7 ("vdpa/mlx5: Restore the hardware used index after change map")
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix sparse errors in i40e_txrx.c

commit 12738ac4754ec92a6a45bf3677d8da780a1412b3 upstream.

Remove error handling through pointers. Instead use plain int
to return value from i40e_run_xdp(...).

Previously:
- sparse errors were produced during compilation:
i40e_txrx.c:2338 i40e_run_xdp() error: (-2147483647) too low for ERR_PTR
i40e_txrx.c:2558 i40e_clean_rx_irq() error: 'skb' dereferencing possible ERR_PTR()

- sk_buff* was used to return value, but it has never had valid
pointer to sk_buff. Returned value was always int handled as
a pointer.

Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions")
Fixes: 2e6893123830 ("i40e: split XDP_TX tail and XDP_REDIRECT map flushing")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: Fix sparse error: uninitialized symbol 'ring'

commit d6d04ee6d2c9bb5084c8f6074195d6aa0024e825 upstream.

Init pointer with NULL in default switch case statement.

Previously the error was produced when compiling against sparse.
i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'.

Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>