Aaron Ma [Tue, 16 Nov 2021 14:19:17 +0000 (22:19 +0800)]
net: usb: r8152: Add MAC passthrough support for more Lenovo Docks
Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original
Realtek USB ethernet chip ID 0bda:8153.
Lenovo Docks always use their own IDs for usb hub, even for older Docks.
If parent hub is from Lenovo, then r8152 should try MAC passthrough.
Verified on Lenovo TBT3 dock too.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 17 Nov 2021 10:50:53 +0000 (10:50 +0000)]
Merge tag 'mlx5-fixes-2021-11-16' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2021-11-16
Please pull this mlx5 fixes series, or let me know in case of any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Gleixner [Mon, 15 Nov 2021 15:21:23 +0000 (16:21 +0100)]
net: stmmac: Fix signed/unsigned wreckage
The recent addition of timestamp correction to compensate the CDC error
introduced a subtle signed/unsigned bug in stmmac_get_tx_hwtstamp() while
it managed for some obscure reason to avoid that in stmmac_get_rx_hwtstamp().
The issue is:
s64 adjust = 0;
u64 ns;
adjust += -(2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate));
ns += adjust;
works by chance on 64bit, but falls apart on 32bit because the compiler
knows that adjust fits into 32bit and then treats the addition as a u64 +
u32 resulting in an off by ~2 seconds failure.
The RX variant uses an u64 for adjust and does the adjustment via
ns -= adjust;
because consistency is obviously overrated.
Get rid of the pointless zero initialized adjust variable and do:
ns -= (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate;
which is obviously correct and spares the adjust obfuscation. Aside of that
it yields a more accurate result because the multiplication takes place
before the integer divide truncation and not afterwards.
Stick the calculation into an inline so it can't be accidentally
disimproved. Return an u32 from that inline as the result is guaranteed
to fit which lets the compiler optimize the substraction.
Cc: stable@vger.kernel.org
Fixes:
3600be5f58c1 ("net: stmmac: add timestamp correction to rid CDC sync error")
Reported-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Benedikt Spranger <b.spranger@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel EHL
Link: https://lore.kernel.org/r/87mtm578cs.ffs@tglx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 17 Nov 2021 03:17:41 +0000 (19:17 -0800)]
Merge branch 'net-fix-the-mirred-packet-drop-due-to-the-incorrect-dst'
Xin Long says:
====================
net: fix the mirred packet drop due to the incorrect dst
This issue was found when using OVS HWOL on OVN-k8s. These packets
dropped on rx path were seen with output dst, which should've been
dropped from the skbs when redirecting them.
The 1st patch is to the fix and the 2nd is a selftest to reproduce
and verify it.
====================
Link: https://lore.kernel.org/r/cover.1636734751.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Fri, 12 Nov 2021 16:33:12 +0000 (11:33 -0500)]
selftests: add a test case for mirred egress to ingress
add a selftest that verifies the correct behavior of TC act_mirred egress
to ingress: in particular, it checks if the dst_entry is removed from skb
before redirect egress -> ingress. The correct behavior is: an ICMP 'echo
request' generated by ping will be received and generate a reply the same
way as the one generated by mausezahn.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Fri, 12 Nov 2021 16:33:11 +0000 (11:33 -0500)]
net: sched: act_mirred: drop dst for the direction from egress to ingress
Without dropping dst, the packets sent from local mirred/redirected
to ingress will may still use the old dst. ip_rcv() will drop it as
the old dst is for output and its .input is dst_discard.
This patch is to fix by also dropping dst for those packets that are
mirred or redirected from egress to ingress in act_mirred.
Note that we don't drop it for the direction change from ingress to
egress, as on which there might be a user case attaching a metadata
dst by act_tunnel_key that would be used later.
Fixes:
b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Tue, 16 Nov 2021 16:09:23 +0000 (16:09 +0000)]
amt: cancel delayed_work synchronously in amt_fini()
When the amt module is being removed, it calls cancel_delayed_work()
to cancel pending delayed_work. But this function doesn't wait for
canceling delayed_work.
So, workers can be still doing after module delete.
In order to avoid this, cancel_delayed_work_sync() should be used instead.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes:
bc54e49c140b ("amt: add multicast(IGMP) report message handler")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20211116160923.25258-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Skripkin [Tue, 16 Nov 2021 14:13:03 +0000 (17:13 +0300)]
MAINTAINERS: remove GR-everest-linux-l2@marvell.com
I've sent a patch to GR-everest-linux-l2@marvell.com few days ago and
got a reply from postmaster@marvell.com:
Delivery has failed to these recipients or groups:
gr-everest-linux-l2@marvell.com<mailto:gr-everest-linux-l2@marvell.com>
The email address you entered couldn't be found. Please check the
recipient's email address and try to resend the message. If the problem
continues, please contact your helpdesk.
As requested by Alok Prasad, replacing GR-everest-linux-l2@marvell.com
with Manish Chopra's email address. [0]
Link: https://lore.kernel.org/all/20211116081601.11208-1-palok@marvell.com/
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211116141303.32180-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Tue, 16 Nov 2021 19:26:10 +0000 (14:26 -0500)]
bnxt_en: Fix compile error regression when CONFIG_BNXT_SRIOV is not set
bp->sriov_cfg is not defined when CONFIG_BNXT_SRIOV is not set. Fix
it by adding a helper function bnxt_sriov_cfg() to handle the logic
with or without the config option.
Fixes:
46d08f55d24e ("bnxt_en: extend RTNL to VF check in devlink driver_reinit")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1637090770-22835-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marcin Wojtas [Mon, 15 Nov 2021 15:30:24 +0000 (16:30 +0100)]
net: mvmdio: fix compilation warning
The kernel test robot reported a following issue:
>> drivers/net/ethernet/marvell/mvmdio.c:426:36: warning:
unused variable 'orion_mdio_acpi_match' [-Wunused-const-variable]
static const struct acpi_device_id orion_mdio_acpi_match[] = {
^
1 warning generated.
Fix that by surrounding the variable by appropriate ifdef.
Fixes:
c54da4c1acb1 ("net: mvmdio: add ACPI support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211115153024.209083-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 17 Nov 2021 00:53:58 +0000 (16:53 -0800)]
Merge tag 'mac80211-for-net-2021-11-16' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Couple of fixes:
* bad dont-reorder check
* throughput LED trigger for various new(ish) paths
* radiotap header generation
* locking assertions in mac80211 with monitor mode
* radio statistics
* don't try to access IV when not present
* call stop_ap for P2P_GO as well as we should
* tag 'mac80211-for-net-2021-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: fix throughput LED trigger
mac80211: fix monitor_sdata RCU/locking assertions
mac80211: drop check for DONT_REORDER in __ieee80211_select_queue
mac80211: fix radiotap header generation
mac80211: do not access the IV when it was stripped
nl80211: fix radio statistics in survey dump
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
====================
Link: https://lore.kernel.org/r/20211116160845.157214-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 17 Nov 2021 00:53:47 +0000 (16:53 -0800)]
Merge https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2021-11-16
We've added 12 non-merge commits during the last 5 day(s) which contain
a total of 23 files changed, 573 insertions(+), 73 deletions(-).
The main changes are:
1) Fix pruning regression where verifier went overly conservative rejecting
previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer.
2) Fix verifier TOCTOU bug when using read-only map's values as constant
scalars during verification, from Daniel Borkmann.
3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson.
4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker.
5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing
programs due to deadlock possibilities, from Dmitrii Banshchikov.
6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang.
7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin.
8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
udp: Validate checksum in udp_read_sock()
bpf: Fix toctou on read-only map's constant scalar tracking
samples/bpf: Fix build error due to -isystem removal
selftests/bpf: Add tests for restricted helpers
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
libbpf: Perform map fd cleanup for gen_loader in case of error
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
tools/runqslower: Fix cross-build
samples/bpf: Fix summary per-sec stats in xdp_sample_user
selftests/bpf: Check map in map pruning
bpf: Fix inner map state pruning regression.
xsk: Fix crash on double free in buffer pool
====================
Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Raed Salem [Mon, 1 Nov 2021 14:18:53 +0000 (16:18 +0200)]
net/mlx5: E-Switch, return error if encap isn't supported
On regular ConnectX HCAs getting encap mode isn't supported when the
E-Switch is in NONE mode. Current code would return no error code when
trying to get encap mode in such case which is wrong.
Fix by returning error value to indicate failure to caller in such case.
Fixes:
8e0aa4bc959c ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maher Sanalla [Fri, 5 Nov 2021 09:19:48 +0000 (11:19 +0200)]
net/mlx5: Lag, update tracker when state change event received
Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.
For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.
Fixes:
9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Roi Dayan [Mon, 8 Nov 2021 14:41:05 +0000 (16:41 +0200)]
net/mlx5e: CT, Fix multiple allocations and memleak of mod acts
CT clear action offload adds additional mod hdr actions to the
flow's original mod actions in order to clear the registers which
hold ct_state.
When such flow also includes encap action, a neigh update event
can cause the driver to unoffload the flow and then reoffload it.
Each time this happens, the ct clear handling adds that same set
of mod hdr actions to reset ct_state until the max of mod hdr
actions is reached.
Also the driver never releases the allocated mod hdr actions and
causing a memleak.
Fix above two issues by moving CT clear mod acts allocation
into the parsing actions phase and only use it when offloading the rule.
The release of mod acts will be done in the normal flow_put().
backtrace:
[<
000000007316e2f3>] krealloc+0x83/0xd0
[<
00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core]
[<
00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core]
[<
0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core]
[<
00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core]
[<
00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core]
[<
000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core]
[<
00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core]
[<
00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core]
[<
00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]
Fixes:
1ef3018f5af3 ("net/mlx5e: CT: Support clear action")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Avihai Horon [Wed, 3 Nov 2021 11:04:23 +0000 (13:04 +0200)]
net/mlx5: Fix flow counters SF bulk query len
When doing a flow counters bulk query, the number of counters to query
must be aligned to 4. Current SF bulk query len is not aligned to 4,
which leads to an error when trying to query more than 4 counters.
Fix it by aligning SF bulk query len to 4.
Fixes:
2fdeb4f4c2ae ("net/mlx5: Reduce flow counters bulk query buffer size for SFs")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark Bloch [Wed, 10 Nov 2021 15:19:12 +0000 (15:19 +0000)]
net/mlx5: E-Switch, rebuild lag only when needed
A user can enable VFs without changing E-Switch mode, this can happen
when a user moves straight to switchdev mode and only once in switchdev
VFs are enabled via the sysfs interface.
The cited commit assumed this isn't possible and exposed a single
API function where the E-switch calls into the lag code, breaks the lag
and prevents any other lag operations to take place until the
E-switch update has ended.
Breaking the hardware lag when it isn't needed can make it such that
hardware lag can't be enabled again.
In the sysfs call path check if the current E-Switch mode is NONE,
in the context of the function it can only mean the E-Switch is moving
out of NONE mode and the hardware lag should be disabled and enabled
once the mode change has ended. If the mode isn't NONE it means
VFs are about to be enabled and such operation doesn't require
toggling the hardware lag.
Fixes:
cac1eb2cf2e3 ("net/mlx5: Lag, properly lock eswitch if needed")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Neta Ostrovsky [Wed, 27 Oct 2021 12:16:14 +0000 (15:16 +0300)]
net/mlx5: Update error handler for UCTX and UMEM
In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.
This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641] disable_device+0x8c/0x130 [ib_core]
[ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661] device_release_driver_internal+0x103/0x1f0
[ 2633.545679] bus_remove_device+0xf7/0x170
[ 2633.546640] device_del+0x181/0x410
[ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864] remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819] pci_device_remove+0x3b/0xc0
[ 2633.552731] device_release_driver_internal+0x103/0x1f0
[ 2633.553746] unbind_store+0xf6/0x130
[ 2633.554657] kernfs_fop_write+0x116/0x190
[ 2633.555567] vfs_write+0xa5/0x1a0
[ 2633.556407] ksys_write+0x4f/0xb0
[ 2633.557233] do_syscall_64+0x5b/0x1a0
[ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:
00007fffb1a83888 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 2633.563472] RAX:
ffffffffffffffda RBX:
000000000000000c RCX:
00007f9977132648
[ 2633.564541] RDX:
000000000000000c RSI:
000055b90546e230 RDI:
0000000000000001
[ 2633.565596] RBP:
000055b90546e230 R08:
00007f9977406860 R09:
00007f9977a54740
[ 2633.566653] R10:
0000000000000000 R11:
0000000000000246 R12:
00007f99774056e0
[ 2633.567692] R13:
000000000000000c R14:
00007f9977400880 R15:
000000000000000c
[ 2633.568725] ---[ end trace
10b4fe52945e544d ]---
Fixes:
6a6fabbfa3e8 ("net/mlx5: Update pci error handler entries and command translation")
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Wed, 3 Nov 2021 15:51:03 +0000 (17:51 +0200)]
net/mlx5: DR, Fix check for unsupported fields in match param
The existing loop doesn't cast the buffer while scanning it, which
results in out-of-bounds read and failure to create the matcher.
Fixes:
941f19798a11 ("net/mlx5: DR, Add check for unsupported fields in match param")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yevgeny Kliteynik [Tue, 2 Nov 2021 23:09:04 +0000 (01:09 +0200)]
net/mlx5: DR, Handle eswitch manager and uplink vports separately
When querying eswitch manager vport capabilities as "other = 1",
we encounter a FW compatibility issue with older FW versions.
To maintain backward compatibility, eswitch manager vport should
be queried as "other = 0" vport both for ECPF and non-ECPF cases.
This patch fixes these queries and improves the code readability
by handling eswitch manager and uplink vports separately, avoiding
the excessive 'if' conditions. Also, uplink caps are stored similar
to esw manager and not as part of xarray.
Fixes:
dd4acb2a0954 ("net/mlx5: DR, Add missing query for vport 0")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Valentine Fatiev [Tue, 26 Oct 2021 08:42:41 +0000 (11:42 +0300)]
net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()
Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.
Fix it by nullify cq->dbg pointer after removal.
Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.
general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:
ffff888137dd7a38 EFLAGS:
00010206
RAX:
0000000000000000 RBX:
ffff888107d5f458 RCX:
00000000fffffffe
RDX:
000000000002c2b0 RSI:
ffffffff8155e2e0 RDI:
0002000300004058
RBP:
ffff888137dd7a88 R08:
0002000300004058 R09:
ffff8881144a9f88
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8881141d4000
R13:
ffff888137dd7c68 R14:
ffff888137dd7d58 R15:
ffff888137dd7cc0
FS:
00007f4644f2a4c0(0000) GS:
ffff8887a2d40000(0000)
knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055b4500f4380 CR3:
0000000114f7a003 CR4:
0000000000170ea0
Call Trace:
simple_recursive_removal+0x33/0x2e0
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
devx_obj_cleanup+0x151/0x330 [mlx5_ib]
? __pollwait+0xd0/0xd0
? xas_load+0x5/0x70
? xa_load+0x62/0xa0
destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
uobj_destroy+0x54/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0
Fixes:
94b960b9deff ("net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path")
Signed-off-by: Valentine Fatiev <valentinef@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Paul Blakey [Thu, 20 May 2021 14:09:58 +0000 (17:09 +0300)]
net/mlx5: E-Switch, Fix resetting of encap mode when entering switchdev
E-Switch encap mode is relevant only when in switchdev mode.
The RDMA driver can query the encap configuration via
mlx5_eswitch_get_encap_mode(). Make sure it returns the currently
used mode and not the set one.
This reverts the cited commit which reset the encap mode
on entering switchdev and fixes the original issue properly.
Fixes:
9a64144d683a ("net/mlx5: E-Switch, Fix default encap mode")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Thu, 21 Oct 2021 15:15:10 +0000 (18:15 +0300)]
net/mlx5e: Wait for concurrent flow deletion during neigh/fib events
Function mlx5e_take_tmp_flow() skips flows with zero reference count. This
can cause syndrome 0x179e84 when the called from neigh or route update code
and the skipped flow is not removed from the hardware by the time
underlying encap/decap resource is deleted. Add new completion
'del_hw_done' that is completed when flow is unoffloaded. This is safe to
do because flow with reference count zero needs to be detached from
encap/decap entry before its memory is deallocated, which requires taking
the encap_tbl_lock mutex that is held by the event handlers code.
Fixes:
8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Tariq Toukan [Wed, 15 Sep 2021 10:25:31 +0000 (13:25 +0300)]
net/mlx5e: kTLS, Fix crash in RX resync flow
For the TLS RX resync flow, we maintain a list of TLS contexts
that require some attention, to communicate their resync information
to the HW.
Here we fix list corruptions, by protecting the entries against
movements coming from resync_handle_seq_match(), until their resync
handling in napi is fully completed.
Fixes:
e9ce991bce5b ("net/mlx5e: kTLS, Add resiliency to RX resync failures")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
David S. Miller [Tue, 16 Nov 2021 13:27:32 +0000 (13:27 +0000)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-11-15
This series contains updates to iavf driver only.
Mateusz adds a wait for reset completion when changing queue count which
could otherwise cause issues with VF reset.
Nick adds a null check for vf_res in iavf_fix_features(), corrects
ordering of function calls to resolve dependency issues, and prevents
possible freeing of a lock which isn't being held.
Piotr fixes logic that did not allow setting all multicast mode without
promiscuous mode.
Jake prevents possible accidental freeing of filter structure.
Mitch adds null checks for key and indir parameters in iavf_get_rxfh().
Surabhi adds an additional check that would, previously, cause the driver
to print a false error due to values obtained while the VF is in reset.
Grzegorz prevents a queue request of 0 which would cause queue count to
reset to default values.
Akeem restores VLAN filters when bringing the interface back up.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Mon, 15 Nov 2021 04:40:06 +0000 (20:40 -0800)]
udp: Validate checksum in udp_read_sock()
It turns out the skb's in sock receive queue could have bad checksums, as
both ->poll() and ->recvmsg() validate checksums. We have to do the same
for ->read_sock() path too before they are redirected in sockmap.
Fixes:
d7f571188ecf ("udp: Implement ->read_sock() for sockmap")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20211115044006.26068-1-xiyou.wangcong@gmail.com
Daniel Borkmann [Tue, 9 Nov 2021 18:48:08 +0000 (18:48 +0000)]
bpf: Fix toctou on read-only map's constant scalar tracking
Commit
a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is
checking whether maps are read-only both from BPF program side and user space
side, and then, given their content is constant, reading out their data via
map->ops->map_direct_value_addr() which is then subsequently used as known
scalar value for the register, that is, it is marked as __mark_reg_known()
with the read value at verification time. Before
a23740ec43ba, the register
content was marked as an unknown scalar so the verifier could not make any
assumptions about the map content.
The current implementation however is prone to a TOCTOU race, meaning, the
value read as known scalar for the register is not guaranteed to be exactly
the same at a later point when the program is executed, and as such, the
prior made assumptions of the verifier with regards to the program will be
invalid which can cause issues such as OOB access, etc.
While the BPF_F_RDONLY_PROG map flag is always fixed and required to be
specified at map creation time, the map->frozen property is initially set to
false for the map given the map value needs to be populated, e.g. for global
data sections. Once complete, the loader "freezes" the map from user space
such that no subsequent updates/deletes are possible anymore. For the rest
of the lifetime of the map, this freeze one-time trigger cannot be undone
anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_*
cmd calls which would update/delete map entries will be rejected with -EPERM
since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also
means that pending update/delete map entries must still complete before this
guarantee is given. This corner case is not an issue for loaders since they
create and prepare such program private map in successive steps.
However, a malicious user is able to trigger this TOCTOU race in two different
ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is
used to expand the competition interval, so that map_update_elem() can modify
the contents of the map after map_freeze() and bpf_prog_load() were executed.
This works, because userfaultfd halts the parallel thread which triggered a
map_update_elem() at the time where we copy key/value from the user buffer and
this already passed the FMODE_CAN_WRITE capability test given at that time the
map was not "frozen". Then, the main thread performs the map_freeze() and
bpf_prog_load(), and once that had completed successfully, the other thread
is woken up to complete the pending map_update_elem() which then changes the
map content. For ii) the idea of the batched update is similar, meaning, when
there are a large number of updates to be processed, it can increase the
competition interval between the two. It is therefore possible in practice to
modify the contents of the map after executing map_freeze() and bpf_prog_load().
One way to fix both i) and ii) at the same time is to expand the use of the
map's map->writecnt. The latter was introduced in
fc9702273e2e ("bpf: Add mmap()
support for BPF_MAP_TYPE_ARRAY") and further refined in
1f6cb19be2e2 ("bpf:
Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with
the rationale to make a writable mmap()'ing of a map mutually exclusive with
read-only freezing. The counter indicates writable mmap() mappings and then
prevents/fails the freeze operation. Its semantics can be expanded beyond
just mmap() by generally indicating ongoing write phases. This would essentially
span any parallel regular and batched flavor of update/delete operation and
then also have map_freeze() fail with -EBUSY. For the check_mem_access() in
the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all
last pending writes have completed via bpf_map_write_active() test. Once the
map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0
only then we are really guaranteed to use the map's data as known constants.
For map->frozen being set and pending writes in process of still being completed
we fall back to marking that register as unknown scalar so we don't end up
making assumptions about it. With this, both TOCTOU reproducers from i) and
ii) are fixed.
Note that the map->writecnt has been converted into a atomic64 in the fix in
order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating
map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning
the freeze_mutex over entire map update/delete operations in syscall side
would not be possible due to then causing everything to be serialized.
Similarly, something like synchronize_rcu() after setting map->frozen to wait
for update/deletes to complete is not possible either since it would also
have to span the user copy which can sleep. On the libbpf side, this won't
break
d66562fba1ce ("libbpf: Add BPF object skeleton support") as the
anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed
mmap()-ed memory where for .rodata it's non-writable.
Fixes:
a23740ec43ba ("bpf: Track contents of read-only maps as scalars")
Reported-by: w1tcher.bupt@gmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Mon, 15 Nov 2021 13:07:41 +0000 (14:07 +0100)]
samples/bpf: Fix build error due to -isystem removal
Since recent Kbuild updates we no longer include files from compiler
directories. However, samples/bpf/hbm_kern.h hasn't been tuned for
this (LLVM 13):
CLANG-bpf samples/bpf/hbm_out_kern.o
In file included from samples/bpf/hbm_out_kern.c:55:
samples/bpf/hbm_kern.h:12:10: fatal error: 'stddef.h' file not found
^~~~~~~~~~
1 error generated.
CLANG-bpf samples/bpf/hbm_edt_kern.o
In file included from samples/bpf/hbm_edt_kern.c:53:
samples/bpf/hbm_kern.h:12:10: fatal error: 'stddef.h' file not found
^~~~~~~~~~
1 error generated.
It is enough to just drop both stdbool.h and stddef.h from includes
to fix those.
Fixes:
04e85bbf71c9 ("isystem: delete global -isystem compile option")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://lore.kernel.org/bpf/20211115130741.3584-1-alexandr.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov [Sun, 14 Nov 2021 18:33:25 +0000 (10:33 -0800)]
Merge branch 'Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs'
Dmitrii Banshchikov says:
====================
Various locking issues are possible with bpf_ktime_get_coarse_ns() and
bpf_timer_* set of helpers.
syzbot found a locking issue with bpf_ktime_get_coarse_ns() helper executed in
BPF_PROG_TYPE_PERF_EVENT prog type - [1]. The issue is possible because the
helper uses non fast version of time accessor that isn't safe for any context.
The helper was added because it provided performance benefits in comparison to
bpf_ktime_get_ns() helper.
A similar locking issue is possible with bpf_timer_* set of helpers when used
in tracing progs.
The solution is to restrict use of the helpers in tracing progs.
In the [1] discussion it was stated that bpf_spin_lock related helpers shall
also be excluded for tracing progs. The verifier has a compatibility check
between a map and a program. If a tracing program tries to use a map which
value has struct bpf_spin_lock the verifier fails that is why bpf_spin_lock is
already restricted.
Patch 1 restricts helpers
Patch 2 adds tests
v1 -> v2:
* Limit the helpers via func proto getters instead of allowed callback
* Add note about helpers' restrictions to linux/bpf.h
* Add Fixes tag
* Remove extra \0 from btf_str_sec
* Beside asm tests add prog tests
* Trim CC
1. https://lore.kernel.org/all/
00000000000013aebd05cff8e064@google.com/
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dmitrii Banshchikov [Sat, 13 Nov 2021 14:22:27 +0000 (18:22 +0400)]
selftests/bpf: Add tests for restricted helpers
This patch adds tests that bpf_ktime_get_coarse_ns(), bpf_timer_* and
bpf_spin_lock()/bpf_spin_unlock() helpers are forbidden in tracing progs
as their use there may result in various locking issues.
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211113142227.566439-3-me@ubique.spb.ru
Dmitrii Banshchikov [Sat, 13 Nov 2021 14:22:26 +0000 (18:22 +0400)]
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
Use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in tracing
progs may result in locking issues.
bpf_ktime_get_coarse_ns() uses ktime_get_coarse_ns() time accessor that
isn't safe for any context:
======================================================
WARNING: possible circular locking dependency detected
5.15.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.4/14877 is trying to acquire lock:
ffffffff8cb30008 (tk_core.seq.seqcount){----}-{0:0}, at: ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255
but task is already holding lock:
ffffffff90dbf200 (&obj_hash[i].lock){-.-.}-{2:2}, at: debug_object_deactivate+0x61/0x400 lib/debugobjects.c:735
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&obj_hash[i].lock){-.-.}-{2:2}:
lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd1/0x120 kernel/locking/spinlock.c:162
__debug_object_init+0xd9/0x1860 lib/debugobjects.c:569
debug_hrtimer_init kernel/time/hrtimer.c:414 [inline]
debug_init kernel/time/hrtimer.c:468 [inline]
hrtimer_init+0x20/0x40 kernel/time/hrtimer.c:1592
ntp_init_cmos_sync kernel/time/ntp.c:676 [inline]
ntp_init+0xa1/0xad kernel/time/ntp.c:1095
timekeeping_init+0x512/0x6bf kernel/time/timekeeping.c:1639
start_kernel+0x267/0x56e init/main.c:1030
secondary_startup_64_no_verify+0xb1/0xbb
-> #0 (tk_core.seq.seqcount){----}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3051 [inline]
check_prevs_add kernel/locking/lockdep.c:3174 [inline]
validate_chain+0x1dfb/0x8240 kernel/locking/lockdep.c:3789
__lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5015
lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625
seqcount_lockdep_reader_access+0xfe/0x230 include/linux/seqlock.h:103
ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255
ktime_get_coarse include/linux/timekeeping.h:120 [inline]
ktime_get_coarse_ns include/linux/timekeeping.h:126 [inline]
____bpf_ktime_get_coarse_ns kernel/bpf/helpers.c:173 [inline]
bpf_ktime_get_coarse_ns+0x7e/0x130 kernel/bpf/helpers.c:171
bpf_prog_a99735ebafdda2f1+0x10/0xb50
bpf_dispatcher_nop_func include/linux/bpf.h:721 [inline]
__bpf_prog_run include/linux/filter.h:626 [inline]
bpf_prog_run include/linux/filter.h:633 [inline]
BPF_PROG_RUN_ARRAY include/linux/bpf.h:1294 [inline]
trace_call_bpf+0x2cf/0x5d0 kernel/trace/bpf_trace.c:127
perf_trace_run_bpf_submit+0x7b/0x1d0 kernel/events/core.c:9708
perf_trace_lock+0x37c/0x440 include/trace/events/lock.h:39
trace_lock_release+0x128/0x150 include/trace/events/lock.h:58
lock_release+0x82/0x810 kernel/locking/lockdep.c:5636
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:149 [inline]
_raw_spin_unlock_irqrestore+0x75/0x130 kernel/locking/spinlock.c:194
debug_hrtimer_deactivate kernel/time/hrtimer.c:425 [inline]
debug_deactivate kernel/time/hrtimer.c:481 [inline]
__run_hrtimer kernel/time/hrtimer.c:1653 [inline]
__hrtimer_run_queues+0x2f9/0xa60 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x3b3/0x1040 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0xf9/0x270 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8c/0xb0 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
_raw_spin_unlock_irqrestore+0xd4/0x130 kernel/locking/spinlock.c:194
try_to_wake_up+0x702/0xd20 kernel/sched/core.c:4118
wake_up_process kernel/sched/core.c:4200 [inline]
wake_up_q+0x9a/0xf0 kernel/sched/core.c:953
futex_wake+0x50f/0x5b0 kernel/futex/waitwake.c:184
do_futex+0x367/0x560 kernel/futex/syscalls.c:127
__do_sys_futex kernel/futex/syscalls.c:199 [inline]
__se_sys_futex+0x401/0x4b0 kernel/futex/syscalls.c:180
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
There is a possible deadlock with bpf_timer_* set of helpers:
hrtimer_start()
lock_base();
trace_hrtimer...()
perf_event()
bpf_run()
bpf_timer_start()
hrtimer_start()
lock_base() <- DEADLOCK
Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in
BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT
and BPF_PROG_TYPE_RAW_TRACEPOINT prog types.
Fixes:
d05512618056 ("bpf: Add bpf_ktime_get_coarse_ns helper")
Fixes:
b00628b1c7d5 ("bpf: Introduce bpf timers.")
Reported-by: syzbot+43fd005b5a1b4d10781e@syzkaller.appspotmail.com
Signed-off-by: Dmitrii Banshchikov <me@ubique.spb.ru>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211113142227.566439-2-me@ubique.spb.ru
Akeem G Abodunrin [Fri, 4 Jun 2021 16:53:27 +0000 (09:53 -0700)]
iavf: Restore VLAN filters after link down
Restore VLAN filters after the link is brought down, and up - since all
filters are deleted from HW during the netdev link down routine.
Fixes:
ed1f5b58ea01 ("i40evf: remove VLAN filters on close")
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Grzegorz Szczurek [Fri, 4 Jun 2021 16:49:00 +0000 (09:49 -0700)]
iavf: Fix for setting queues to 0
Now setting combine to 0 will be rejected with the
appropriate error code.
This has been implemented by adding a condition that checks
the value of combine equal to zero.
Without this patch, when the user requested it, no error was
returned and combine was set to the default value for VF.
Fixes:
5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Surabhi Boob [Fri, 4 Jun 2021 16:48:59 +0000 (09:48 -0700)]
iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.
Fixes:
19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mitch Williams [Fri, 4 Jun 2021 16:48:58 +0000 (09:48 -0700)]
iavf: validate pointers
In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.
Fixes:
43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jacob Keller [Fri, 4 Jun 2021 16:48:57 +0000 (09:48 -0700)]
iavf: prevent accidental free of filter structure
In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.
In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.
This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.
Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.
Fixes:
0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Piotr Marczak [Fri, 4 Jun 2021 16:48:56 +0000 (09:48 -0700)]
iavf: Fix failure to exit out from last all-multicast mode
The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore
Fixes:
f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Nicholas Nunley [Fri, 4 Jun 2021 16:48:55 +0000 (09:48 -0700)]
iavf: don't clear a lock we don't hold
In iavf_configure_clsflower() the function will bail out if it is unable
to obtain the crit_section lock in a reasonable time. However, it will
clear the lock when exiting, so fix this.
Fixes:
640a8af5841f ("i40evf: Reorder configure_clsflower to avoid deadlock on error")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Nicholas Nunley [Fri, 4 Jun 2021 16:48:54 +0000 (09:48 -0700)]
iavf: free q_vectors before queues in iavf_disable_vf
iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.
Fixes:
65c7006f234c ("i40evf: assign num_active_queues inside i40evf_alloc_queues")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Nicholas Nunley [Fri, 4 Jun 2021 16:48:53 +0000 (09:48 -0700)]
iavf: check for null in iavf_fix_features
If the driver has lost contact with the PF then it enters a disabled state
and frees adapter->vf_res. However, ndo_fix_features can still be called on
the interface, so we need to check for this condition first. Since we have
no information on the features at this time simply leave them unmodified
and return.
Fixes:
c4445aedfe09 ("i40evf: Fix VLAN features")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Tue, 9 Feb 2021 11:59:38 +0000 (11:59 +0000)]
iavf: Fix return of set the new channel count
Fixed return correct code from set the new channel count.
Implemented by check if reset is done in appropriate time.
This solution give a extra time to pf for reset vf in case
when user want set new channel count for all vfs.
Without this patch it is possible to return misleading output
code to user and vf reset not to be correctly performed by pf.
Fixes:
5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Wen Gu [Mon, 15 Nov 2021 09:45:07 +0000 (17:45 +0800)]
net/smc: Make sure the link_id is unique
The link_id is supposed to be unique, but smcr_next_link_id() doesn't
skip the used link_id as expected. So the patch fixes this.
Fixes:
026c381fb477 ("net/smc: introduce link_idx for link group array")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tetsuo Handa [Mon, 15 Nov 2021 10:16:56 +0000 (19:16 +0900)]
sock: fix /proc/net/sockstat underflow in sk_clone_lock()
sk_clone_lock() needs to call sock_inuse_add(1) before entering the
sk_free_unlock_clone() error path, for __sk_free() from sk_free() from
sk_free_unlock_clone() calls sock_inuse_add(-1).
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes:
648845ab7e200993 ("sock: Move the socket inuse to namespace.")
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 15 Nov 2021 12:45:24 +0000 (07:45 -0500)]
tipc: only accept encrypted MSG_CRYPTO msgs
The MSG_CRYPTO msgs are always encrypted and sent to other nodes
for keys' deployment. But when receiving in peers, if those nodes
do not validate it and make sure it's encrypted, one could craft
a malicious MSG_CRYPTO msg to deploy its key with no need to know
other nodes' keys.
This patch is to do that by checking TIPC_SKB_CB(skb)->decrypted
and discard it if this packet never got decrypted.
Note that this is also a supplementary fix to CVE-2021-43267 that
can be triggered by an unencrypted malicious MSG_CRYPTO msg.
Fixes:
1ef6f7c9390f ("tipc: add automatic session key exchange")
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
liuguoqiang [Mon, 15 Nov 2021 08:14:48 +0000 (16:14 +0800)]
net: return correct error code
When kmemdup called failed and register_net_sysctl return NULL, should
return ENOMEM instead of ENOBUFS
Signed-off-by: liuguoqiang <liuguoqiang@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Meng Li [Mon, 15 Nov 2021 07:04:23 +0000 (15:04 +0800)]
net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform
According to upstream commit
5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.
Fixes:
5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Nov 2021 14:13:20 +0000 (14:13 +0000)]
Merge branch 'bnxt_en-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes
This series includes 3 fixes. The first one fixes a race condition
between devlink reload and SR-IOV configuration. The second one
fixes a type mismatch warning in devlink fw live patching. The
last one fixes unwanted OVS TC dmesg error logs when tc-hw-offload is
disabled on bnxt_en.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Sriharsha Basavapatna [Mon, 15 Nov 2021 07:38:01 +0000 (02:38 -0500)]
bnxt_en: reject indirect blk offload when hw-tc-offload is off
The driver does not check if hw-tc-offload is enabled for the device
before offloading a flow in the context of indirect block callback.
Fix this by checking NETIF_F_HW_TC in the features flag and rejecting
the offload request. This will avoid unnecessary dmesg error logs when
hw-tc-offload is disabled, such as these:
bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Fixes:
627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Mon, 15 Nov 2021 07:38:00 +0000 (02:38 -0500)]
bnxt_en: fix format specifier in live patch error message
This fixes type mismatch warning.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
3c4153394e2c ("bnxt_en: implement firmware live patching")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Edwin Peer [Mon, 15 Nov 2021 07:37:59 +0000 (02:37 -0500)]
bnxt_en: extend RTNL to VF check in devlink driver_reinit
The fixes the race condition between configuring SR-IOV and devlink
reload. The SR-IOV configure logic already takes the RTNL lock,
setting sriov_cfg under the lock while changes are underway. Extend
the lock scope in devlink driver_reinit to cover the VF check and
don't run concurrently with SR-IOV configure.
Reported-by: Leon Romanovsky <leon@kernel.org>
Fixes:
228ea8c187d8 ("bnxt_en: implement devlink dev reload driver_reinit")
Cc: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Mon, 15 Nov 2021 01:02:29 +0000 (17:02 -0800)]
net: ethernet: lantiq_etop: fix build errors/warnings
Fix build error and warnings reported by kernel test robot:
drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_probe':
drivers/net/ethernet/lantiq_etop.c:673:15: error: implicit declaration of function 'device_property_read_u32' [-Werror=implicit-function-declaration]
673 | err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
drivers/net/ethernet/lantiq_etop.c: At top level:
drivers/net/ethernet/lantiq_etop.c:730:1: warning: no previous prototype for 'init_ltq_etop' [-Wmissing-prototypes]
730 | init_ltq_etop(void)
drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
drivers/net/ethernet/lantiq_etop.c:276:25: warning: ignoring return value of 'request_irq' declared with attribute 'warn_unused_result' [-Wunused-result]
276 | request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
drivers/net/ethernet/lantiq_etop.c:284:25: warning: ignoring return value of 'request_irq' declared with attribute 'warn_unused_result' [-Wunused-result]
284 | request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
Fixes:
14d4e308e0aa ("net: lantiq: configure the burst length in ethernet drivers")
Fixes:
dddb29e42770 ("net: lantiq_etop: remove deprecated IRQF_DISABLED")
Fixes:
504d4721ee8e ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/
202111090621.yjr9xuVj-lkp@intel.com
To: netdev@vger.kernel.org
Cc: Aleksander Jan Bajkowski <olek2@wp.pl>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Michael Opdenacker <michael.opdenacker@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zekun Shen [Sun, 14 Nov 2021 03:24:40 +0000 (22:24 -0500)]
atlantic: Fix OOB read and write in hw_atl_utils_fw_rpc_wait
This bug report shows up when running our research tools. The
reports is SOOB read, but it seems SOOB write is also possible
a few lines below.
In details, fw.len and sw.len are inputs coming from io. A len
over the size of self->rpc triggers SOOB. The patch fixes the
bugs by adding sanity checks.
The bugs are triggerable with compromised/malfunctioning devices.
They are potentially exploitable given they first leak up to
0xffff bytes and able to overwrite the region later.
The patch is tested with QEMU emulater.
This is NOT tested with a real device.
Attached is the log we found by fuzzing.
BUG: KASAN: slab-out-of-bounds in
hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
Read of size 4 at addr
ffff888016260b08 by task modprobe/213
CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1
Call Trace:
dump_stack+0x76/0xa0
print_address_description.constprop.0+0x16/0x200
? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
__kasan_report.cold+0x37/0x7c
? aq_hw_read_reg_bit+0x60/0x70 [atlantic]
? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
kasan_report+0xe/0x20
hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic]
hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic]
hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic]
hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic]
? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic]
? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic]
hw_atl_utils_initfw+0x12a/0x1c8 [atlantic]
aq_nic_ndev_register+0x88/0x650 [atlantic]
? aq_nic_ndev_init+0x235/0x3c0 [atlantic]
aq_pci_probe+0x731/0x9b0 [atlantic]
? aq_pci_func_init+0xc0/0xc0 [atlantic]
local_pci_probe+0xd3/0x160
pci_device_probe+0x23f/0x3e0
Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu>
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Skripkin [Sat, 13 Nov 2021 22:36:36 +0000 (01:36 +0300)]
net: bnx2x: fix variable dereferenced before check
Smatch says:
bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
warn: variable dereferenced before check 'ilt' (see line 638)
Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.
Fixes:
523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Sat, 13 Nov 2021 07:33:35 +0000 (15:33 +0800)]
net/smc: Transfer remaining wait queue entries during fallback
The SMC fallback is incomplete currently. There may be some
wait queue entries remaining in smc socket->wq, which should
be removed to clcsocket->wq during the fallback.
For example, in nginx/wrk benchmark, this issue causes an
all-zeros test result:
server: nginx -g 'daemon off;'
client: smc_run wrk -c 1 -t 1 -d 5 http://11.200.15.93/index.html
Running 5s test @ http://11.200.15.93/index.html
1 threads and 1 connections
Thread Stats Avg Stdev Max ± Stdev
Latency 0.00us 0.00us 0.00us -nan%
Req/Sec 0.00 0.00 0.00 -nan%
0 requests in 5.00s, 0.00B read
Requests/sec: 0.00
Transfer/sec: 0.00B
The reason for this all-zeros result is that when wrk used SMC
to replace TCP, it added an eppoll_entry into smc socket->wq
and expected to be notified if epoll events like EPOLL_IN/
EPOLL_OUT occurred on the smc socket.
However, once a fallback occurred, wrk switches to use clcsocket.
Now it is clcsocket->wq instead of smc socket->wq which will
be woken up. The eppoll_entry remaining in smc socket->wq does
not work anymore and wrk stops the test.
This patch fixes this issue by removing remaining wait queue
entries from smc socket->wq to clcsocket->wq during the fallback.
Link: https://www.spinics.net/lists/netdev/msg779769.html
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 15 Nov 2021 13:25:45 +0000 (13:25 +0000)]
Merge branch 'net-ipa-fixes'
Alex Elder says:
====================
net: ipa: HOLB register write fixes
This small series fixes two recently identified bugs related to the
way two registers must be written. The registers define whether and
when to drop packets if a head-of-line blocking condition is
encountered. The "enable" (dropping packets) register must be
written twice for newer versions of hardware. And the timer
register must not be written while dropping is enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 12 Nov 2021 22:22:10 +0000 (16:22 -0600)]
net: ipa: disable HOLB drop when updating timer
The head-of-line blocking timer should only be modified when
head-of-line drop is disabled.
One of the steps in recovering from a modem crash is to enable
dropping of packets with timeout of 0 (immediate). We don't know
how the modem configured its endpoints, so before we program the
timer, we need to ensure HOL_BLOCK is disabled.
Fixes:
84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Fri, 12 Nov 2021 22:22:09 +0000 (16:22 -0600)]
net: ipa: HOLB register sometimes must be written twice
Starting with IPA v4.5, the HOL_BLOCK_EN register must be written
twice when enabling head-of-line blocking avoidance.
Fixes:
84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiapeng Chong [Fri, 12 Nov 2021 10:16:34 +0000 (18:16 +0800)]
net: Clean up some inconsistent indenting
Eliminate the follow smatch warning:
./include/linux/skbuff.h:4229 skb_remcsum_process() warn: inconsistent
indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Fri, 12 Nov 2021 07:56:03 +0000 (08:56 +0100)]
tun: fix bonding active backup with arp monitoring
As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
Drivers that use NETIF_F_LLTX flag must also update
netdev_queue->trans_start. If they do not, then the ARP monitor will
immediately fail any slaves using that driver, and those slaves will stay
down.
Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tadeusz Struk [Thu, 11 Nov 2021 20:59:16 +0000 (12:59 -0800)]
tipc: use consistent GFP flags
Some functions, like tipc_crypto_start use inconsisten GFP flags
when allocating memory. The mentioned function use GFP_ATOMIC to
to alloc a crypto instance, and then calls alloc_ordered_workqueue()
which allocates memory with GFP_KERNEL. tipc_aead_init() function
even uses GFP_KERNEL and GFP_ATOMIC interchangeably.
No doc comment specifies what context a function is designed to
work in, but the flags should at least be consistent within a function.
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: tipc-discussion@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Fietkau [Sat, 13 Nov 2021 06:34:15 +0000 (07:34 +0100)]
mac80211: fix throughput LED trigger
The codepaths for rx with decap offload and tx with itxq were not updating
the counters for the throughput led trigger.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211113063415.55147-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 12 Nov 2021 12:51:44 +0000 (13:51 +0100)]
mac80211: fix monitor_sdata RCU/locking assertions
Since commit
a05829a7222e ("cfg80211: avoid holding the RTNL when
calling the driver") we've not only been protecting the pointer
to monitor_sdata with the RTNL, but also with the wiphy->mtx. This
is relevant in a number of lockdep assertions, e.g. the one we hit
in ieee80211_set_monitor_channel(). However, we're now protecting
all the assignments/dereferences, even the one in interface iter,
with the wiphy->mtx, so switch over the lockdep assertions to that
lock.
Fixes:
a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20211112135143.cb8e8ceffef3.Iaa210f16f6904c8a7a24954fb3396da0ef86ec08@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Felix Fietkau [Wed, 10 Nov 2021 21:22:01 +0000 (22:22 +0100)]
mac80211: drop check for DONT_REORDER in __ieee80211_select_queue
When __ieee80211_select_queue is called, skb->cb has not been cleared yet,
which means that info->control.flags can contain garbage.
In some cases this leads to IEEE80211_TX_CTRL_DONT_REORDER being set, causing
packets marked for other queues to randomly end up in BE instead.
This flag only needs to be checked in ieee80211_select_queue_80211, since
the radiotap parser is the only piece of code that sets it
Fixes:
66d06c84730c ("mac80211: adhere to Tx control flag that prevents frame reordering")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211110212201.35452-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Tue, 9 Nov 2021 09:02:04 +0000 (10:02 +0100)]
mac80211: fix radiotap header generation
In commit
8c89f7b3d3f2 ("mac80211: Use flex-array for radiotap header
bitmap") we accidentally pointed the position to the wrong place, so
we overwrite a present bitmap, and thus cause all kinds of trouble.
To see the issue, note that the previous code read:
pos = (void *)(it_present + 1);
The requirement now is that we need to calculate pos via it_optional,
to not trigger the compiler hardening checks, as:
pos = (void *)&rthdr->it_optional[...];
Rewriting the original expression, we get (obviously, since that just
adds "+ x - x" terms):
pos = (void *)(it_present + 1 + rthdr->it_optional - rthdr->it_optional)
and moving the "+ rthdr->it_optional" outside to be used as an array:
pos = (void *)&rthdr->it_optional[it_present + 1 - rthdr->it_optional];
The original is off by one, fix it.
Cc: stable@vger.kernel.org
Fixes:
8c89f7b3d3f2 ("mac80211: Use flex-array for radiotap header bitmap")
Reported-by: Sid Hayn <sidhayn@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Sid Hayn <sidhayn@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211109100203.c61007433ed6.I1dade57aba7de9c4f48d68249adbae62636fd98c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Xing Song [Mon, 1 Nov 2021 02:46:57 +0000 (10:46 +0800)]
mac80211: do not access the IV when it was stripped
ieee80211_get_keyid() will return false value if IV has been stripped,
such as return 0 for IP/ARP frames due to LLC header, and return -EINVAL
for disassociation frames due to its length... etc. Don't try to access
it if it's not present.
Signed-off-by: Xing Song <xing.song@mediatek.com>
Link: https://lore.kernel.org/r/20211101024657.143026-1-xing.song@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 29 Oct 2021 07:25:39 +0000 (09:25 +0200)]
nl80211: fix radio statistics in survey dump
Even if userspace specifies the NL80211_ATTR_SURVEY_RADIO_STATS
attribute, we cannot get the statistics because we're not really
parsing the incoming attributes properly any more.
Fix this by passing the attrbuf to nl80211_prepare_wdev_dump()
and filling it there, if given, and using a local version only
if no output is desired.
Since I'm touching it anyway, make nl80211_prepare_wdev_dump()
static.
Fixes:
50508d941c18 ("cfg80211: use parallel_ops for genl")
Reported-by: Jan Fuchs <jf@simonwunderlich.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20211029092539.2851b4799386.If9736d4575ee79420cbec1bd930181e1d53c7317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Nguyen Dinh Phi [Wed, 27 Oct 2021 17:37:22 +0000 (01:37 +0800)]
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com
Cc: stable@vger.kernel.org
Fixes:
ac800140c20e ("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Paul Moore [Fri, 12 Nov 2021 23:18:10 +0000 (18:18 -0500)]
net,lsm,selinux: revert the security_sctp_assoc_established() hook
This patch reverts two prior patches,
e7310c94024c
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e6a ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arjun Roy [Thu, 11 Nov 2021 23:52:15 +0000 (15:52 -0800)]
tcp: Fix uninitialized access in skb frags array for Rx 0cp.
TCP Receive zerocopy iterates through the SKB queue via
tcp_recv_skb(), acquiring a pointer to an SKB and an offset within
that SKB to read from. From there, it iterates the SKB frags array to
determine which offset to start remapping pages from.
However, this is built on the assumption that the offset read so far
within the SKB is smaller than the SKB length. If this assumption is
violated, we can attempt to read an invalid frags array element, which
would cause a fault.
tcp_recv_skb() can cause such an SKB to be returned when the TCP FIN
flag is set. Therefore, we must guard against this occurrence inside
skb_advance_frag().
One way that we can reproduce this error follows:
1) In a receiver program, call getsockopt(TCP_ZEROCOPY_RECEIVE) with:
char some_array[32 * 1024];
struct tcp_zerocopy_receive zc = {
.copybuf_address = (__u64) &some_array[0],
.copybuf_len = 32 * 1024,
};
2) In a sender program, after a TCP handshake, send the following
sequence of packets:
i) Seq = [X, X+4000]
ii) Seq = [X+4000, X+5000]
iii) Seq = [X+4000, X+5000], Flags = FIN | URG, urgptr=1000
(This can happen without URG, if we have a signal pending, but URG is
a convenient way to reproduce the behaviour).
In this case, the following event sequence will occur on the receiver:
tcp_zerocopy_receive():
-> receive_fallback_to_copy() // copybuf_len >= inq
-> tcp_recvmsg_locked() // reads 5000 bytes, then breaks due to URG
-> tcp_recv_skb() // yields skb with skb->len == offset
-> tcp_zerocopy_set_hint_for_skb()
-> skb_advance_to_frag() // will returns a frags ptr. >= nr_frags
-> find_next_mappable_frag() // will dereference this bad frags ptr.
With this patch, skb_advance_to_frag() will no longer return an
invalid frags pointer, and will return NULL instead, fixing the issue.
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes:
05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Link: https://lore.kernel.org/r/20211111235215.2605384-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 11 Nov 2021 21:08:24 +0000 (13:08 -0800)]
ethernet: sis900: fix indentation
A space has snuck in.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
74fad215ee3d ("ethernet: sis900: use eth_hw_addr_set()")
Link: https://lore.kernel.org/r/20211111210824.676201-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Konrad Dybcio [Thu, 11 Nov 2021 18:37:24 +0000 (19:37 +0100)]
net/ipa: ipa_resource: Fix wrong for loop range
The source group count was mistakenly assigned to both dst and src loops.
Fix it to make IPA probe and work again.
Fixes:
4fd704b3608a ("net: ipa: record number of groups in data")
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20211111183724.593478-1-konrad.dybcio@somainline.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 11 Nov 2021 16:29:29 +0000 (08:29 -0800)]
selftests: net: switch to socat in the GSO GRE test
Commit
a985442fdecb ("selftests: net: properly support IPv6 in GSO GRE test")
is not compatible with:
Ncat: Version 7.80 ( https://nmap.org/ncat )
(which is distributed with Fedora/Red Hat), tests fail with:
nc: invalid option -- 'N'
Let's switch to socat which is far more dependable.
Fixes:
025efa0a82df ("selftests: add simple GSO GRE test")
Fixes:
a985442fdecb ("selftests: net: properly support IPv6 in GSO GRE test")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Link: https://lore.kernel.org/r/20211111162929.530470-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Thu, 11 Nov 2021 15:50:34 +0000 (07:50 -0800)]
ptp: ptp_clockmatrix: repair non-kernel-doc comment
Do not use "/**" to begin a comment that is not in kernel-doc format.
Prevents this docs build warning:
drivers/ptp/ptp_clockmatrix.c:1679: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Maximum absolute value for write phase offset in picoseconds
Then remove the kernel-doc-like function parameter descriptions
since they don't add any useful info. (suggested by Jakub)
Fixes:
794c3dffacc16 ("ptp: ptp_clockmatrix: Add support for FW 5.2 (8A34005)")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20211111155034.29153-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lin Ma [Thu, 11 Nov 2021 14:14:02 +0000 (22:14 +0800)]
hamradio: remove needs_free_netdev to avoid UAF
The former patch "defer 6pack kfree after unregister_netdev" reorders
the kfree of two buffer after the unregister_netdev to prevent the race
condition. It also adds free_netdev() function in sixpack_close(), which
is a direct copy from the similar code in mkiss_close().
However, in sixpack driver, the flag needs_free_netdev is set to true in
sp_setup(), hence the unregister_netdev() will free the netdev
automatically. Therefore, as the sp is netdev_priv, use-after-free
occurs.
This patch removes the needs_free_netdev = true and just let the
free_netdev to finish this deallocation task.
Fixes:
0b9111922b1f ("hamradio: defer 6pack kfree after unregister_netdev")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kumar Kartikeya Dwivedi [Fri, 12 Nov 2021 23:20:22 +0000 (04:50 +0530)]
libbpf: Perform map fd cleanup for gen_loader in case of error
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes:
18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
Kumar Kartikeya Dwivedi [Fri, 12 Nov 2021 02:03:01 +0000 (07:33 +0530)]
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
Commit
b599015f044d ("samples/bpf: Fix application of sizeof to pointer")
tried to fix a bug where sizeof was incorrectly applied to a pointer instead
of the array string was being copied to, to find the destination buffer size,
but ended up using strlen, which is still incorrect. However, on closer look
ifname_buf has no other use, hence directly use optarg.
Fixes:
b599015f044d ("samples/bpf: Fix application of sizeof to pointer")
Fixes:
e531a220cc59 ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/bpf/20211112020301.528357-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jean-Philippe Brucker [Fri, 12 Nov 2021 15:51:30 +0000 (15:51 +0000)]
tools/runqslower: Fix cross-build
Commit
be79505caf3f ("tools/runqslower: Install libbpf headers when
building") uses the target libbpf to build the host bpftool, which
doesn't work when cross-building:
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/runqslower O=/tmp/runqslower
...
LINK /tmp/runqslower/bpftool/bpftool
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a(libbpf-in.o): Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/runqslower/libbpf/libbpf.a: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
When cross-building, the target architecture differs from the host. The
bpftool used for building runqslower is executed on the host, and thus
must use a different libbpf than that used for runqslower itself.
Remove the LIBBPF_OUTPUT and LIBBPF_DESTDIR parameters, so the bpftool
build makes its own library if necessary.
In the selftests, pass the host bpftool, already a prerequisite for the
runqslower recipe, as BPFTOOL_OUTPUT. The runqslower Makefile will use
the bpftool that's already built for selftests instead of making a new
one.
Fixes:
be79505caf3f ("tools/runqslower: Install libbpf headers when building")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211112155128.565680-1-jean-philippe@linaro.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexander Lobakin [Thu, 11 Nov 2021 21:57:03 +0000 (22:57 +0100)]
samples/bpf: Fix summary per-sec stats in xdp_sample_user
sample_summary_print() uses accumulated period to calculate and display
per-sec averages. This period gets incremented by sampling interval each
time a new sample is formed, and thus equals to the number of samples
collected multiplied by this interval.
However, the totals are being calculated differently, they receive current
sample statistics already divided by the interval gotten as a difference
between sample timestamps for better precision -- in other words, they are
being incremented by the per-sec values each sample.
This leads to the excessive division of summary per-secs when interval != 1
sec. It is obvious pps couldn't become two times lower just from picking a
different sampling interval value:
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 1
< snip >
Packets received : 2,197,230,321
Average packets/s : 22,887,816
Packets redirected : 2,197,230,472
Average redir/s : 22,887,817
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 2
< snip >
Packets received : 159,566,498
Average packets/s : 11,397,607
Packets redirected : 159,566,995
Average redir/s : 11,397,642
This can be easily fixed by treating the divisor not as a period, but rather
as a total number of samples, and thus incrementing it by 1 instead of
interval. As a nice side effect, we can now remove so-named argument from a
couple of functions. Let us also create an "alias" for sample_output::rx_cnt::pps
named 'num' using a union since this field is used to store this number (period
previously) as well, and the resulting counter-intuitive code might've been a
reason for this bug.
Fixes:
156f886cf697 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211111215703.690-1-alexandr.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Lorenz Bauer [Thu, 11 Nov 2021 16:14:52 +0000 (16:14 +0000)]
selftests/bpf: Check map in map pruning
Ensure that two registers with a map_value loaded from a nested
map are considered equivalent for the purpose of state pruning
and don't cause the verifier to revisit a pruning point.
This uses a rather crude match on the number of insns visited by
the verifier, which might change in the future. I've therefore
tried to keep the code as "unpruneable" as possible by having
the code paths only converge on the second to last instruction.
Should you require to adjust the test in the future, reducing the
number of processed instructions should always be safe. Increasing
them could cause another regression, so proceed with caution.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211111161452.86864-1-lmb@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Linus Torvalds [Fri, 12 Nov 2021 20:35:46 +0000 (12:35 -0800)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a boot crash regression"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: api - Fix boot-up crash when crypto manager is disabled
Linus Torvalds [Fri, 12 Nov 2021 20:25:50 +0000 (12:25 -0800)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This series is all the stragglers that didn't quite make the first
merge window pull. It's mostly minor updates and bug fixes of merge
window code but it also has two driver updates: ufs and qla2xxx"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
scsi: scsi_debug: Don't call kcalloc() if size arg is zero
scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
scsi: scsi_ioctl: Validate command size
scsi: ufs: ufshpb: Properly handle max-single-cmd
scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
scsi: sr: Remove duplicate assignment
scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
scsi: ufs: ufs-exynos: Factor out priv data init
scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
scsi: ufs: ufs-exynos: Add setup_clocks callback
scsi: ufs: ufs-exynos: Add refclkout_stop control
scsi: ufs: ufs-exynos: Simplify drv_data retrieval
scsi: ufs: ufs-exynos: Change pclk available max value
scsi: ufs: Add quirk to enable host controller without PH configuration
scsi: ufs: Add quirk to handle broken UIC command
...
Linus Torvalds [Fri, 12 Nov 2021 20:22:06 +0000 (12:22 -0800)]
Merge tag 'pwm/for-5.16-rc1' of git://git./linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set is mostly small fixes and cleanups, so more of a janitorial
update for this cycle"
* tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific
dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings
dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings
pwm: pwm-samsung: Trigger manual update when disabling PWM
pwm: visconti: Simplify using devm_pwmchip_add()
pwm: samsung: Describe driver in Kconfig
pwm: Make it explicit that pwm_apply_state() might sleep
pwm: Add might_sleep() annotations for !CONFIG_PWM API functions
pwm: atmel: Drop unused header
Linus Torvalds [Fri, 12 Nov 2021 20:17:30 +0000 (12:17 -0800)]
Merge tag 'sound-fix-5.16-rc1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for 5.16-rc1, notably for a few regressions that
were found in 5.15 and pre-rc1:
- revert of the unification of SG-buffer helper functions on x86 and
the relevant fix
- regression fixes for mmap after the recent code refactoring
- two NULL dereference fixes in HD-audio controller driver
- UAF fixes in ALSA timer core
- a few usual HD-audio and FireWire quirks"
* tag 'sound-fix-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: fireworks: add support for Loud Onyx 1200f quirk
ALSA: hda: fix general protection fault in azx_runtime_idle
ALSA: hda: Free card instance properly at probe errors
ALSA: hda/realtek: Add quirk for HP EliteBook 840 G7 mute LED
ALSA: memalloc: Remove a stale comment
ALSA: synth: missing check for possible NULL after the call to kstrdup
ALSA: memalloc: Use proper SG helpers for noncontig allocations
ALSA: pci: rme: Fix unaligned buffer addresses
ALSA: firewire-motu: add support for MOTU Track 16
ALSA: PCM: Fix NULL dereference at mmap checks
ALSA: hda/realtek: Add quirk for ASUS UX550VE
ALSA: timer: Unconditionally unlink slave instances, too
ALSA: memalloc: Catch call with NULL snd_dma_buffer pointer
Revert "ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type"
ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54N
ALSA: firewire-motu: add support for MOTU Traveler mk3
ALSA: hda/realtek: Headset fixup for Clevo NH77HJQ
ALSA: timer: Fix use-after-free problem
Linus Torvalds [Fri, 12 Nov 2021 20:11:07 +0000 (12:11 -0800)]
Merge tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
Linus Torvalds [Fri, 12 Nov 2021 19:53:16 +0000 (11:53 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"Just one new driver (Cypress StreetFighter touchkey), and no input
core changes this time.
Plus various fixes and enhancements to existing drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: iforce - fix control-message timeout
Input: wacom_i2c - use macros for the bit masks
Input: ili210x - reduce sample period to 15ms
Input: ili210x - improve polled sample spacing
Input: ili210x - special case ili251x sample read out
Input: elantench - fix misreporting trackpoint coordinates
Input: synaptics-rmi4 - Fix device hierarchy
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: cap11xx - add support for cap1206
Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
Input: ili210x - add ili251x firmware update support
Input: ili210x - export ili251x version details via sysfs
Input: ili210x - use resolution from ili251x firmware
Input: pm8941-pwrkey - respect reboot_mode for warm reset
reboot: export symbol 'reboot_mode'
Input: max77693-haptic - drop unneeded MODULE_ALIAS
Input: cpcap-pwrbutton - do not set input parent explicitly
Input: max8925_onkey - don't mark comment as kernel-doc
Input: ads7846 - do not attempt IRQ workaround when deferring probe
Input: ads7846 - use input_set_capability()
...
Linus Torvalds [Fri, 12 Nov 2021 19:44:31 +0000 (11:44 -0800)]
Merge tag 'rtc-5.16' of git://git./linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
Linus Torvalds [Fri, 12 Nov 2021 19:32:22 +0000 (11:32 -0800)]
Merge tag 'libata-5.16-rc1-p2' of git://git./linux/kernel/git/dlemoal/libata
Pull more libata updates from Damien Le Moal:
"Second round of updates for libata for 5.16:
- Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
revalidation after a resume or a modprobe of the LLDD (me)
- Remove unnecessary error message in sata_highbank driver (Xu)
- Better handling of accesses to the IDENTIFY DEVICE data log for
drives that do not support this log page (me)
- Fix ahci_shost_attr_group declaration in ahci driver (me)"
* tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
libata: libahci: declare ahci_shost_attr_group as static
libata: add horkage for missing Identify Device log
ata: sata_highbank: Remove unnecessary print function dev_err()
libata: fix read log timeout value
Sasha Levin [Fri, 12 Nov 2021 15:16:02 +0000 (10:16 -0500)]
tools/lib/lockdep: drop liblockdep
TL;DR: While a tool like liblockdep is useful, it probably doesn't
belong within the kernel tree.
liblockdep attempts to reuse kernel code both directly (by directly
building the kernel's lockdep code) as well as indirectly (by using
sanitized headers). This makes liblockdep an integral part of the
kernel.
It also makes liblockdep quite unique: while other userspace code might
use sanitized headers, it generally doesn't attempt to use kernel code
directly which means that changes on the kernel side of things don't
affect (and break) it directly.
All our workflows and tooling around liblockdep don't support this
uniqueness. Changes that go into the kernel code aren't validated to not
break in-tree userspace code.
liblockdep ended up being very fragile, breaking over and over, to the
point that living in the same tree as the lockdep code lost most of it's
value.
liblockdep should continue living in an external tree, syncing with
the kernel often, in a controllable way.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 12 Nov 2021 18:56:25 +0000 (10:56 -0800)]
thermal: int340x: fix build on 32-bit targets
Commit
aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.
That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access. Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.
It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.
The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.
So just add the include for the 'io-64-nonatomic-lo-hi.h' version.
Fixes:
aeb58c860dc5 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexei Starovoitov [Wed, 10 Nov 2021 17:25:56 +0000 (09:25 -0800)]
bpf: Fix inner map state pruning regression.
Introduction of map_uid made two lookups from outer map to be distinct.
That distinction is only necessary when inner map has an embedded timer.
Otherwise it will make the verifier state pruning to be conservative
which will cause complex programs to hit 1M insn_processed limit.
Tighten map_uid logic to apply to inner maps with timers only.
Fixes:
3e8ce29850f1 ("bpf: Prevent pointer mismatch in bpf_timer_init.")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Lorenz Bauer <lmb@cloudflare.com>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20211110172556.20754-1-alexei.starovoitov@gmail.com
Magnus Karlsson [Thu, 11 Nov 2021 07:57:07 +0000 (08:57 +0100)]
xsk: Fix crash on double free in buffer pool
Fix a crash in the buffer pool allocator when a buffer is double
freed. It is possible to trigger this behavior not only from a faulty
driver, but also from user space like this: Create a zero-copy AF_XDP
socket. Load an XDP program that will issue XDP_DROP for all
packets. Put the same umem buffer into the fill ring multiple times,
then bind the socket and send some traffic. This will crash the kernel
as the XDP_DROP action triggers one call to xsk_buff_free()/xp_free()
for every packet dropped. Each call will add the corresponding buffer
entry to the free_list and increase the free_list_cnt. Some entries
will have been added multiple times due to the same buffer being
freed. The buffer allocation code will then traverse this broken list
and since the same buffer is in the list multiple times, it will try
to delete the same buffer twice from the list leading to a crash.
The fix for this is just to test that the buffer has not been added
before in xp_free(). If it has been, just return from the function and
do not put it in the free_list a second time.
Note that this bug was not present in the code before the commit
referenced in the Fixes tag. That code used one list entry per
allocated buffer, so multiple frees did not have any side effects. But
the commit below optimized the usage of the pool and only uses a
single entry per buffer in the umem, meaning that multiple
allocations/frees of the same buffer will also only use one entry,
thus leading to the problem.
Fixes:
47e4075df300 ("xsk: Batched buffer allocation for the pool")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20211111075707.21922-1-magnus.karlsson@gmail.com
Dmitry Torokhov [Fri, 12 Nov 2021 05:58:54 +0000 (21:58 -0800)]
Merge branch 'next' into for-linus
Prepare input updates for 5.16 merge window.
Dave Airlie [Fri, 12 Nov 2021 03:06:37 +0000 (13:06 +1000)]
Merge tag 'drm-misc-fixes-2021-11-11' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
* dma-buf: name_lock fixes
* prime: Keep object ref during mmap
* nouveau: Fix a refcount issue; Fix device removal; Protect client
list with dedicated mutex; Fix address CE0 address calculation
* ttm: Fix race condition during BO eviction
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YYzY6jeox9EeI15i@linux-uq9g.fritz.box
Dave Airlie [Thu, 11 Nov 2021 23:22:28 +0000 (09:22 +1000)]
BackMerge tag 'v5.15' into drm-next
I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.
Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Thu, 11 Nov 2021 23:10:18 +0000 (15:10 -0800)]
Merge tag 'pci-v5.16-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Revert conversion to struct device.driver instead of struct
pci_dev.driver.
The device.driver is set earlier, and using it caused the PCI core to
call driver PM entry points before .probe() and after .remove(), when
the driver isn't prepared.
This caused NULL pointer dereferences in i2c_designware_pci and
probably other driver issues"
* tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"
Revert "PCI: Remove struct pci_dev->driver"
Damien Le Moal [Thu, 11 Nov 2021 03:03:27 +0000 (12:03 +0900)]
libata: libahci: declare ahci_shost_attr_group as static
ahci_shost_attr_group is referenced only in drivers/ata/libahci.c.
Declare it as static.
Fixes:
c3f69c7f629f ("scsi: ata: Switch to attribute groups")
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Damien Le Moal [Mon, 8 Nov 2021 23:45:25 +0000 (08:45 +0900)]
libata: add horkage for missing Identify Device log
ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.
Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Thu, 11 Nov 2021 23:00:04 +0000 (15:00 -0800)]
Merge tag 'kcsan.2021.11.11a' of git://git./linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This contains initialization fixups, testing improvements, addition of
instruction pointer to data-race reports, and scoped data-race checks"
* tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: selftest: Cleanup and add missing __init
kcsan: Move ctx to start of argument list
kcsan: Support reporting scoped read-write access type
kcsan: Start stack trace with explicit location if provided
kcsan: Save instruction pointer for scoped accesses
kcsan: Add ability to pass instruction pointer of access to reporting
kcsan: test: Fix flaky test case
kcsan: test: Use kunit_skip() to skip tests
kcsan: test: Defer kcsan_test_init() after kunit initialization
Linus Torvalds [Thu, 11 Nov 2021 22:47:32 +0000 (14:47 -0800)]
Merge tag 'apparmor-pr-2021-11-10' of git://git./linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features
- use per file locks for transactional queries
- update policy management capability checks to work with LSM stacking
Bug Fixes:
- check/put label on apparmor_sk_clone_security()
- fix error check on update of label hname
- fix introspection of of task mode for unconfined tasks
Cleanups:
- avoid -Wempty-body warning
- remove duplicated 'Returns:' comments
- fix doc warning
- remove unneeded one-line hook wrappers
- use struct_size() helper in kzalloc()
- fix zero-length compiler warning in AA_BUG()
- file.h: delete duplicated word
- delete repeated words in comments
- remove repeated declaration"
* tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: remove duplicated 'Returns:' comments
apparmor: remove unneeded one-line hook wrappers
apparmor: Use struct_size() helper in kzalloc()
apparmor: fix zero-length compiler warning in AA_BUG()
apparmor: use per file locks for transactional queries
apparmor: fix doc warning
apparmor: Remove the repeated declaration
apparmor: avoid -Wempty-body warning
apparmor: Fix internal policy capable check for policy management
apparmor: fix error check
security: apparmor: delete repeated words in comments
security: apparmor: file.h: delete duplicated word
apparmor: switch to apparmor to internal capable check for policy management
apparmor: update policy capable checks to use a label
apparmor: fix introspection of of task mode for unconfined tasks
apparmor: check/put label on apparmor_sk_clone_security()
Linus Torvalds [Thu, 11 Nov 2021 22:31:47 +0000 (14:31 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
"The post-linux-next material.
7 patches.
Subsystems affected by this patch series (all mm): debug,
slab-generic, migration, memcg, and kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: add kasan mode messages when kasan init
mm: unexport {,un}lock_page_memcg
mm: unexport folio_memcg_{,un}lock
mm/migrate.c: remove MIGRATE_PFN_LOCKED
mm: migrate: simplify the file-backed pages validation when migrating its mapping
mm: allow only SLUB on PREEMPT_RT
mm/page_owner.c: modify the type of argument "order" in some functions