drm/amd/display: Use dc_update_planes_and_stream

[Why & How]
The old dc_commit_updates_for_stream lacks manipulation for many corner
cases where the DC feature requires special attention; as a result, it
starts to show its limitation (e.g., the SubVP feature is not supported
by it, among other cases). To modernize and unify our internal API, this
commit replaces the old dc_commit_updates_for_stream with
dc_update_planes_and_stream, which has more features.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop dc_commit_state in favor of dc_commit_streams

[Why & How]
There are two functions responsible for handling the DC commit state:
dc_commit_state and dc_commit_streams. Both have the same goal, but
dc_commit_streams surpess dc_commit_state in terms of completeness. For
this reason, maintaining these two functions makes maintainability
unnecessarily complicated. This commit replaces the old dc_commit_state
in favor of dc_commit_streams, and removes the old dc_commit_state.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ensure vmin and vmax adjust for DCE

[Why & How]
In the commit 32953485c558 ("drm/amd/display: Do not update DRR while
BW optimizations pending"), a modification was added to avoid adjusting
DRR if optimized bandwidth is set. This change was only intended for
DCN, but one part of the patch changed the code path for DCE devices and
caused regressions to the kms_vrr test. To address this problem, this
commit adds a modification in which dc_stream_adjust_vmin_vmax will be
fully executed in DCE devices.

Fixes: 32953485c558 ("drm/amd/display: Do not update DRR while BW optimizations pending")
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Pass tg and hubp inst instead of pipe index for SubVP

[Description]
- For pipe harvesting cases, the pipe index does not necessarily
  match up with the OTG instance, so pass index by OTG Instance instead
- For pipe split cases pass HUBP instance, since the split index is
  only used for HUBP programming
- Also check for OPP ID when accessing opp for pipe harvesting cases

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable HostVM based on rIOMMU active

[Why]
There is underflow and flickering occuring. The
underflow stops when hostvm is forced to active.
According to policy, hostvm should be enabled if riommu
is active, but this is not taken into account when
deciding whether to enable hostvm.

[What]
For DCN314, set hostvm to true if riommu is active.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Pass the right info to drm_dp_remove_payload

[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update to correct min FCLK when construction BB

[Description]
- For min FCLK, choose the min of 300Mhz and PMFW requirement
- Also only apply min DET check in DML for non-UR cases

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename DCN config to FP

[Why & How]
The only reason we have the DCN config is for
floating point support. Rename it to make that
clear and (hopefully) avoid misuse of the config
in the future.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unnecessary DCN guards

[Why & How]
DC is littered with many DCN guards that are not needed.
Drop them.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unnecessary DCN guards

[Why]
DM is littered with DCN guards leading to frequent
breakages on non-DCN builds when new code is added.

[How]
Remove all guards that are not needed.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Keep PHY active for dp config

[Why]
Current hotplug sequence causes temporary hang at the re-entry of the
optimized power state.

[How]
Keep a PHY active when detecting DP signal + DPMS active

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify register offsets

[Why]
Runtime initialization of register addresses define
duplicate register offsets in resource file, and makes
register offsets in sub-block defined for compile
time initialization obsolete.

[How]
Remove obsolete sub block register offsets that is
no longer referenced.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: replace all dc_link function call in link with link functions

[why]
Link components should not reply on dc_link_exports to access link function in
other link components.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move dc_link functions in protocols folder to dc_link_exports

[why]
link component should only have one interface serving dc.

[how]
We are moving dc_link functions exposed to DM to dc_link_exports
and unify link component interface in link.h with function pointer
to match the style of other dc component. This is the third step to move
dc_link functions under protocols folder to dc_link_exports.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: link link_dp_dpia_bw.o in makefile

[Why & How]
- We have added link_dp_dpia_bw code but it is not currently
added in makefile. We are adding this to makefile so it would
be built.
- Remove unused dc_link.h

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move dc_link functions in link root folder to dc_link_exports

[why]
link component should only have one interface serving dc.

[how]
We are moving dc_link functions exposed to DM to dc_link_exports
and unify link component interface in link.h with function pointer
to match the style of other dc component. This is the second step to move
dc_link functions under link root folder to dc_link_exports.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: move dc_link functions in accessories folder to dc_link_exports

[why]
link component should only have one interface serving dc.

[how]
We are moving dc_link functions exposed to DM to dc_link_exports
and unify link component interface in link.h with function pointer
to match the style of other dc component. This is the first step to move
dc_link functions under accessories folder to dc_link_exports.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Build DSC without DCN config

[Why & How]
DSC needs DCN but we are trying reduce the usage of the
DCN flag. It's easier to build the DSC code sprinkled
around DC core and the DMs and just guard the place where
DSC uses floating point code.

Since DSC is never enabled on non-DCN ASICs this won't
have any effect.

Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: call remove_stream_from_ctx from res_pool funcs

[Why & How]
DM should never use a non-interface function to call into
DC. The original code is incorrect on ASICs that don't
use DCN20's remove_stream_from_ctx function.

Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDCP

[Why & How]
There is no reason we still need a config option for this.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix typo in dc_dsc_config_options structure

[WHY]
There is a typo in dc_dsc_config_options structure

[HOW]
Fix the typo

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mike Hsieh <Mike.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix no-DCN build

[Why & How]
This fixes a couple misplaced CONFIG_DRM_AMD_DC_DCN
blocks.

Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop CONFIG_DRM_AMD_DC_HDR

[Why & How]
Remove dead code.

Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update minimum stutter residency for DCN314 Z8

[Why]
Block periods that are too short as they have the potential to
currently cause hangs in other firmware components on the system.

[How]
Update the threshold, mostly targeting a block of 4k and downscaling.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add minimum Z8 residency debug option

[Why]
Allows finer control and tuning for debug and profiling.

[How]
Add the debug option into DC. The default remains the same as before
for now.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.225

This version brings along the following:
- Correct way to find OPP index
- Unify DC logging for BW Alloc
- Add height granularity limitation for dsc slice height calculation

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: When blanking during init loop to find OPP index

[Description]
For pipe harvesting cases we cannot rely on array index
to get the correct OPP instance, we must loop through
each instance to find the correct one.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Unify DC logging for BW Alloc

[WHY]
To keep all logging within DC unified

[HOW]
Use the standard DC Logging functions

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add height granularity limitation for dsc slice height calculation

[WHY]
eDP add new limitation for Y granularity for selected update feature.
DSC does not include this limitation while calculating slice height.

[HOW]
Add new limitation while looking for DSC slice height.

Reviewed-by: Cruise Hung <Cruise.Hung@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mike Hsieh <Mike.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip the invalid workload type

If some invalid workload types exposed by the power profile sysfs node,
it will be failed to set the unsuported profiles.
So we can skip to show the invalid workload type in the profiles list to
avoid that failure happen.

Acked-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: map new capped and uncapped mode power profiles for Vangogh

Capped and Uncapped workload types are supported, each workload type
has different performance thresholds and pstate conditions.

* capped mode is used by power centric workload
* uncapped mode is used by perf centric workload

Acked-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: add capped/uncapped power profile modes

Capped and uncapped workload types switching are supported on Vangogh,
User can switch the power profile and check current type with below commands.

1) switch to capped mode:
`# echo 8 > /sys/class/drm/card0/device/pp_power_profile_mode`

2) switch to uncapped mode:
`# echo 9 > /sys/class/drm/card0/device/pp_power_profile_mode`

3) check current mode:
$ cat /sys/class/drm/card0/device/pp_power_profile_mode
 1 3D_FULL_SCREEN
 3          VIDEO
 4             VR
 5        COMPUTE
 6         CUSTOM
 8         CAPPED
 9       UNCAPPED*

Acked-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix return value check in kfd

This patch fixes a return value check in kfd doorbell handling.
This function should return 0(error) only when the ida_simple_get
returns < 0(error), return > 0 is a success case.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Fixes: 16f0013157bf ("drm/amdkfd: Allocate doorbells only when needed")
Acked-by: Christian Koenig <chriatian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify amdgpu_uvd_send_msg

We only need one offset and not an array of it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add PSP ip block for PSP 13.0.6

Add PSP IP handling for PSP 13.0.6

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: initialize ta ucode for psp v13_0_6

Initialize ta ucode for psp v13_0_6

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: init sos microcode for psp v13_0_6

parse psp_v13_0_6_sos.bin and initialze various
psp ucode arraies respectively

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp early init for PSP 13.0.6

Initialize psp ip callbacks for PSP 13.0.6.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set sdma v4_4_2 ip block

Use sdma 4.4.2 IP block for chips with sdma 4.4.2 hardware.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sdma v4_4_2 support (v4)

Add support for SDMA 4.4.2.

v1: Create sdma_v4_4_2.[c|h] for initial support (Le)
v2: update amdgpu_ring_init call with atomic score (Hawking)
v3: Squash in sdma_start fixes (Alex)
v4: Comment out currently unused RAS code (Alex)

Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add sdma v4_4_2 ip headers

Add sdma v4_4_2 register offset and shift masks
header files

v2: update headers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add HDP ip block for HDP 4.4.2

Add HDP IP handling for HDP 4.4.2

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip hdp invalidation for HDP 4.4.2

No mmHDP_READ_CACHE_INVALIDATE register on HDP 4.4.2.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add hdp v4_4_2 ip headers

Add hdp v4_4_2 register offset and shift masks
header files

v2: update headers (Alex)

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add IH ip block for IH 4.4.2

Add IH IP handling for IH 4.4.2

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: skip ih2 rb allocation for IH 4.4.2

No ih2 hardware on IH 4.4.2.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set ih chicken bit for IH 4.4.2

Share same register address with IH 4.4.0.

Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove dead code

The less than zero comparison of unsigned variable "value" is never
true. Remove dead code.

Fixes: c3ed0e72c872 ("drm/amdgpu: added a sysfs interface for thermal throttling")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Simplify same effect if/else blocks

The if / else block code has same effect irrespective of the logical
evaluation.  Hence, simply the implementation by removing the unnecessary
conditional evaluation. While at it, also fix the long line checkpatch
complaint. Issue identified using cond_no_effect.cocci Coccinelle
semantic patch script.

Fixes: 9114b55fabae ("drm/amd/display: Fix SubVP control flow in the MPO context")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdkfd: Memory availability can never be negative

Our assumptions about how much KFD memory is currently available for
allocation may be violated by various complexities so we define the
reported value as advisory, however we should never report negative
availability.

Signed-off-by: Daniel Phillips <daniel.phillips@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix initialization mistake for NBIO 7.3.0

The same strapping initialization issue that happened on NBIO 7.5.1
appears to be happening on NBIO 7.3.0.
Apply the same fix to 7.3.0 as well.

Note: This workaround relies upon the integrated GPU being enabled
in BIOS. If the integrated GPU is disabled in BIOS a different
workaround will be required.

Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/linux-usb/Y%2Fz9GdHjPyF2rNG3@glanzmann.de/T/#u
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix call trace warning and hang when removing amdgpu device

On GPUs with RAS enabled, below call trace and hang are observed when
shutting down device.

v2: use DRM device unplugged flag instead of shutdown flag as the check to
prevent memory wipe in shutdown stage.

[ +0.000000] RIP: 0010:amdgpu_vram_mgr_fini+0x18d/0x1c0 [amdgpu]
[ +0.000001] PKRU: 55555554
[ +0.000001] Call Trace:
[ +0.000001] <TASK>
[ +0.000002] amdgpu_ttm_fini+0x140/0x1c0 [amdgpu]
[ +0.000183] amdgpu_bo_fini+0x27/0xa0 [amdgpu]
[ +0.000184] gmc_v11_0_sw_fini+0x2b/0x40 [amdgpu]
[ +0.000163] amdgpu_device_fini_sw+0xb6/0x510 [amdgpu]
[ +0.000152] amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
[ +0.000090] drm_dev_release+0x28/0x50 [drm]
[ +0.000016] devm_drm_dev_init_release+0x38/0x60 [drm]
[ +0.000011] devm_action_release+0x15/0x20
[ +0.000003] release_nodes+0x40/0xc0
[ +0.000001] devres_release_all+0x9e/0xe0
[ +0.000001] device_unbind_cleanup+0x12/0x80
[ +0.000003] device_release_driver_internal+0xff/0x160
[ +0.000001] driver_detach+0x4a/0x90
[ +0.000001] bus_remove_driver+0x6c/0xf0
[ +0.000001] driver_unregister+0x31/0x50
[ +0.000001] pci_unregister_driver+0x40/0x90
[ +0.000003] amdgpu_exit+0x15/0x120 [amdgpu]

Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused variable

building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:7292:11: error:
unused variable 'tmp' [-Werror=unused-variable]
  uint32_t tmp;
           ^~~

tmp is not used so remove it.

Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Fix BO offset for multi-VMA page migration

svm_migrate_ram_to_vram migrates a prange from sys ram to vram. The prange may
cross multiple vma. Need remember current dst vram offset in the TTM resource for
each migration.

v2: squash in warning fix (Alex)

Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update clock table to include highest clock setting

[Why]
Currently, the clk manager matches SocVoltage with voltage from
fused settings (dfPstate clock table). And then corresponding clocks
are selected.

However in certain situations, this leads to clk manager not
including at least one entry with highest supported clock setting.

[How]
Update the clk manager to include at least one entry with highest
supported clock setting.

Reviewed-by: Pavle Kotarac <pavle.kotarac@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: stop waiting in amdgpu_uvd_send_msg

We have a wait in the amdgpu_bo_kmap() code for quite a while now, so
waiting here isn't needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Enable ecc_info table support for smu v13_0_10

Support EccInfoTable which includes umc ras error count and
error address.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Support umc node harvest config on umc v8_10

Don't need to query error count and error address on harvest umc nodes.
v2: Fix code bug, use active_mask instead of harvsest_config
    and remove unnecessary argument in LOOP macro.
v3: Leave adev->gmc.num_umc unchanged.

Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix no previous prototype warning

add static prefix for vangogh_set_apu_thermal_limit function

Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202303010827.c2N0yBGT-lkp@intel.com
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Stop clearing kiq position during fini

Do not clear kiq position in RLC_CP_SCHEDULER so that CP could perform
IDLE-SAVE after VF fini.
Otherwise it could cause GFX hang if another Win guest is rendering.

Signed-off-by: leiyaoyao <yaoyao.lei@amd.com>
Acked-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/connector: print max_requested_bpc in state debugfs

This is useful to understand the bpc defaults and
support of a driver.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF

The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.

In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.

Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.

This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.

Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609

v2: Distinguish EOTFs defind in kernel and ones defined
    in EDID in the commit description (Pekka)

v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
    to drm_hdmi_helper.c

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-2-harry.wentland@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DAL to 3.2.224

This version brings along the following:
- Correct DML calculation
- Extend Freesync over Pcon support
- Fixes in pstate hang and more
- Code cleanup for dc_link.h and dc_link.c

Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix clock sequence logic for DCN32

[Why&How]
The newer commit sequence on DCN32 onwards did not finish clock
optimization sequence since the newer sequence did not end up calling
dc_post_update_surfaces_to_stream() which resets dc->optimized_required.

Call this function before passing control on to the new commit sequence.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Do not update DRR while BW optimizations pending

[why]
While bandwidth optimizations are pending, it's possible a pstate change
will occur.  During this time, VSYNC handler should not also try to update
DRR parameters causing pstate hang

[how]
Do not adjust DRR if optimize bandwidth is set.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only wait for blank completion if OTG active

[why]
If OTG is not active, waiting for blank completion will always fail and
timeout resulting in unnecessary driver delays.

[how]
Check that OTG is enabled before waiting for blank.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: enable DPG when disabling plane for phantom pipe

[Why]
In disable_dangling_plane, for phantom pipes, we enable OTG so
disable programming gets the double buffer update.  But this
causes an underflow to occur.

[How]
Enable DPG prior to enabling OTG.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove empty dc_link.c

[why]
We kept an empty dc_link.c file due to external
build dependency. Now the last build dependency has
been removed. We can safely delete this file.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Correct DML calculation to align HW formula

[Why]
In 2560x1440@240p eDP panel, some use cases will enable MPC
combine with RGB MPO then underflow happened. This case is
not allowed from HW formula. 

[How]
Correct eDP, DP and DP2 output bpp calculation to align HW
formula.

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: fix compilation issue with legacy gcc

This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {

Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Implement DMA buf fd export from KFD

Exports a DMA buf fd of a given KFD buffer handle. This is intended for
being able to import KFD BOs into GEM contexts to leverage the
amdgpu_bo_va API for more flexible virtual address mappings. It will
also be used for the new upstreamable RDMA solution coming to UCX and
RCCL.

The corresponding user mode change (Thunk API and kfdtest) is here:
https://github.com/fxkamd/ROCT-Thunk-Interface/commits/fxkamd/dmabuf

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Generalize KFD dmabuf import

Use proper amdgpu_gem_prime_import function to handle all kinds of
imports. Remember the dmabuf reference to enable proper multi-GPU
attachment to multiple VMs without erroneously re-exporting the
underlying BO multiple times.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: merge dc_link.h into dc.h and dc_types.h

[why]
Remove the need to include dc_link.h separately. dc.h should contain
everything needed on DM side.

[How]
Merge dc_link.h into dc.h and dc_types.h so DM only needs to include
dc.h to use all link public functions.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update BW ALLOCATION Function declaration

[WHY & HOW]
Update the declaration to give a better idea of what the
function does.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Fix FreeSync active bit issue"

This reverts commit 6cfb6df2d645c00513ecf17832928e08979fa953.

[Why & How]
Original change causes black screen. Revert
until fix is available.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DAL to program DISPCLK WDIVIDER if PMFW doesn't

[Why & How]
- If for any reason PMFW fails to set the expected (or valid)
  DISPCLK WDIVIDER, then DAL will program DENTIST DISPCLK
  WDIVIDER to correct for this issue

Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Extend Freesync over PCon support for more devices

[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.

[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.

Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update pixel format in DP hw sequence

[WHY]
DP 420 formats do not light up because the pixel processing mode
of the DP_FORMAT is misprogrammed

[HOW]
Added appropriate programming for DP pixel format

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: populate subvp cmd info only for the top pipe

[Why]
System restart observed while changing the display resolution
to 8k with extended mode. Sytem restart was caused by a page fault.

[How]
When the driver populates subvp info it did it for both the pipes using
vblank which caused an outof bounds array access causing the page fault.
added checks to allow the top pipe only to fix this issue.

Co-authored-by: Ayush Gupta <ayush.gupta@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayush.gupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dcn32/321 dsc_pg_control not executed properly

[why]
during boot up or resume from s3, hw default value of
domain_power_forceon is 1. when program domain_power_gate
to 1 to power down hw block, hw will not change to power
off due to domain_power_forceon = 1.

[how]
enable_power_gating_plane(true) should be executed to set
domain_power_forceon to 0 before dsc_pg_control.
dsc_pg_control is already called by dcn3x_init_hw-->
init_pipes--> dsc_pg_control. no need be programmed with
dcn3x_init_hw one more time.
to trigger dchub, dsc block power state change, need
program dc_ip_request_cntl to notify hw block.

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Allocation at stream Enable

[WHY & HOW]
After we allocate BW at plug, we will de-alloc
and allocate only what stream needs at
stream_enable()

[HOW]
Introduce bw allocation check at link_enable()
for DPIA links

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Do not set DRR on pipe commit"

This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff.

[Why & How]
Original change causes a regression. Revert
until fix is available.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Updating Video Format Fall Back Policy.

[WHY]
Adding 1920x1080 as fail safe mode for
Video Format Fall Back Policy.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce CPU busy-waiting for long delays

[WHY]
udelay should not be used for long waits since it keeps CPU active,
wasting power.

[HOW]
Use fsleep where acceptable to allow CPU cores to be parked by the scheduler.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes

[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:

  shift exponent 4294966273 is too large for 32-bit type 'int'

[HOW]

In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Ext displays with dock can't recognized after resume

[Why]
Needs to set the default value of the LTTPR timeout after resume.

[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini

The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.

[  489.885525] Call Trace:
[  489.885525]  <TASK>
[  489.885526]  amdttm_bo_put+0x34/0x50 [amdttm]
[  489.885529]  amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[  489.885620]  psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[  489.885720]  psp_hw_fini+0xce/0x170 [amdgpu]
[  489.885815]  amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[  489.885960]  ? blocking_notifier_chain_unregister+0x56/0xb0
[  489.885962]  amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[  489.886049]  amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[  489.886132]  ? __pm_runtime_resume+0x60/0x90
[  489.886134]  pci_device_remove+0x3e/0xb0
[  489.886135]  __device_release_driver+0x1ab/0x2a0
[  489.886137]  driver_detach+0xf3/0x140
[  489.886138]  bus_remove_driver+0x6c/0xf0
[  489.886140]  driver_unregister+0x31/0x60
[  489.886141]  pci_unregister_driver+0x40/0x90
[  489.886142]  amdgpu_exit+0x15/0x451 [amdgpu]

Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused variable ring

building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
  ‘ring’ set but not used [-Werror=unused-but-set-variable]
   81 |         struct amdgpu_ring *ring;
      |                             ^~~~

ring is not used so remove it.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: fix dm irq error message in gpu recover

[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.

  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
  *ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3

[How]
Defer the initialization of num_types to eliminate the error logs.

Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Fix initialization for nbio 7.5.1

A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.

Ensure that they're set during initialization.

Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Format input and output CSC matrix

Format the input and output CSC matrix so they
look like 3x4 matrixes. This will make parsing them
much easier and allows us to quickly spot potential
mistakes.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't restrict bpc to 8 bpc

This will let us pass the kms_hdr.bpc_switch IGT
test.

The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.

Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")

This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.

v2:
 - explain why this is no longer needed (Michel)
 - refer to commit that fixed bpc fallback (Michel)

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Make umc_v8_10_convert_error_address static and remove unused variable

Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added a sysfs interface for thermal throttling

implement apu_thermal_cap r/w callback for vangogh

Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: added a sysfs interface for thermal throttling

added a sysfs interface for thermal throttling, then userspace
can get/update thermal limit

Signed-off-by: Kun Liu <Kun.Liu2@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused local variables and function

Remove a couple of local variables that are only set but never used,
also remove an static utility function that is never used in consequence
of the variable removal.

This decrease the number of -Wunused-but-set-variable warnings.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused local variables

Remove local variables that were just set but were never used. This
decrease the number of -Wunused-but-set-variable warnings.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Fix eDP for single-display iMac11,2

Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load.  This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.

Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.

This patch is an extension of
commit 564d8a2cf3ab ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)")
Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/
Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Make kobj_type structures constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make kobj_type structures constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>