platform/kernel/u-boot.git
7 years agoMerge branch 'rmobile' of git://git.denx.de/u-boot-sh
Tom Rini [Sat, 26 Aug 2017 19:10:46 +0000 (15:10 -0400)]
Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

7 years agoMerge git://git.denx.de/u-boot-x86
Tom Rini [Sat, 26 Aug 2017 19:10:40 +0000 (15:10 -0400)]
Merge git://git.denx.de/u-boot-x86

7 years agoMerge git://git.denx.de/u-boot-i2c
Tom Rini [Sat, 26 Aug 2017 19:10:38 +0000 (15:10 -0400)]
Merge git://git.denx.de/u-boot-i2c

7 years agoMerge git://www.denx.de/git/u-boot-cfi-flash
Tom Rini [Sat, 26 Aug 2017 19:10:35 +0000 (15:10 -0400)]
Merge git://www.denx.de/git/u-boot-cfi-flash

7 years agodisk: part: align buffer so it can be used with DMA enabled drivers
Stefan Agner [Wed, 23 Aug 2017 16:46:17 +0000 (09:46 -0700)]
disk: part: align buffer so it can be used with DMA enabled drivers

When using ISO partitions with a DMA enabled block device driver
reading the ISO partition leads to unaligned DMA operations:
  CACHE: Misaligned operation at range [bffb7da8bffb85a8]

Align the buffer to make sure we pass a buffer which works for
DMA operations.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
7 years agoscripts: objdiff: Ignore debug info when comparing
Stephen Boyd [Wed, 23 Aug 2017 01:59:31 +0000 (10:59 +0900)]
scripts: objdiff: Ignore debug info when comparing

If the kernel is configured to be built with debug symbols, or
has bug tables, comparing files may not work if line numbers
change. This makes comparing object files with these options
harder to do. Let's strip out the debug info and drop the
__bug_table here so that we don't see false positives. There may
be other things to drop later, and it may be architecture
specific, but this works for me with my ARM64 build.

[ Import Linux commit: 65ba6fa439e7c3cbf97de9dce9e7a3390ae2638c ]

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Reviewed-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agodoc: verified-boot: fix typos
Masahiro Yamada [Tue, 22 Aug 2017 06:19:20 +0000 (15:19 +0900)]
doc: verified-boot: fix typos

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agofs: ext4: Fix journal overrun issue reported by Coverity
Tom Rini [Mon, 21 Aug 2017 02:30:15 +0000 (22:30 -0400)]
fs: ext4: Fix journal overrun issue reported by Coverity

While &p_jdb[fs->blksz] is a valid expression (it points *one* char
sized element past the end of the array, e.g. &p_jdb[fs->blksz + 1] is
invalid (according to the C standard (C99/C11)).

Changing this to tag = (struct ext3_journal_block_tag *)(p_jdb + ofs);

Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Suggested-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reported-by: Coverity (CID: 165117, 165110)
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
7 years agomtdparts: Fix final outstanding issue reported by Coverity
Tom Rini [Mon, 21 Aug 2017 00:05:40 +0000 (20:05 -0400)]
mtdparts: Fix final outstanding issue reported by Coverity

As part of fixing the previously reported issues, it was missed that in
the case of mtdparts_init() we need to make sure that tmp_ep is long
enough to contain PARTITION_MAXLEN and a NULL termination.  Then, to be
sure the buffer is NULL terminated, zero the entire buffer rather than
just ensuring the first character is NULL.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Coverity (CID: 166329)
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agospl: stm32: make falcon mode activation configurable
Vikas Manocha [Sun, 20 Aug 2017 18:05:37 +0000 (11:05 -0700)]
spl: stm32: make falcon mode activation configurable

With this change, it will be possible to de-select falcon mode & spl
will only boot U-Boot.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Suggested-by: Bo Shen <voice.shen@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agocmd: spl: provide address and size of prepared FDT in environment
Anatolij Gustschin [Thu, 17 Aug 2017 19:01:48 +0000 (21:01 +0200)]
cmd: spl: provide address and size of prepared FDT in environment

Writing prepared FDT to persistent storage should be possible in
scripts. Create environment variables containing address and size
of the updated FDT. Scripts can use these variables after running
'spl export fdt ...' command to write the new blob to persistent
storage.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
7 years agoigep00x0: merge igep0020 and igep0030 defconfigs to igep00x0_defconfig
Pau Pajuelo [Thu, 17 Aug 2017 01:09:14 +0000 (03:09 +0200)]
igep00x0: merge igep0020 and igep0030 defconfigs to igep00x0_defconfig

Update igep00x0 code with the following features:
- Add board and revision detection for the boards:
  - IGEP0020-RF
  - IGEP0020-RC
  - IGEP0030-RG
  - IGEP0030-RE
- Merge IGEP0020 and IGEP0030 mux tables
- Add suport to use GPIO_126, GPIO_127 and GPIO_129
- board_name and board_rev environment variables display board and
  revision informations
- Move dtb name selection from code to boot script

Signed-off-by: Pau Pajuelo <ppajuel@gmail.com>
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Pau Pajuelo <ppajuel@gmail.com>
7 years agoigep00x0: move SPL routines into separate file
Ladislav Michl [Thu, 17 Aug 2017 01:06:45 +0000 (03:06 +0200)]
igep00x0: move SPL routines into separate file

Avoid cluttering board file with CONFIG_SPL_BUILD ifdefs
by moving SPL related functions into separate file.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Pau Pajuelo <ppajuel@gmail.com>
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
7 years agoarm: dra7xx: Define Android boot arguments
Semen Protsenko [Wed, 16 Aug 2017 12:55:50 +0000 (15:55 +0300)]
arm: dra7xx: Define Android boot arguments

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
7 years agoarm: am57xx: Define Android boot arguments
Semen Protsenko [Wed, 16 Aug 2017 12:55:49 +0000 (15:55 +0300)]
arm: am57xx: Define Android boot arguments

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
7 years agoarm: omap: Define command for booting Android from eMMC
Semen Protsenko [Wed, 16 Aug 2017 12:55:48 +0000 (15:55 +0300)]
arm: omap: Define command for booting Android from eMMC

If SD card is present -- try to boot from it first. If no -- try to boot
Android from eMMC.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
7 years agoARMv8/sec_firmware : Update chosen/kaslr-seed with random number
Ruchika Gupta [Wed, 16 Aug 2017 10:28:10 +0000 (15:58 +0530)]
ARMv8/sec_firmware : Update chosen/kaslr-seed with random number

kASLR support in kernel requires a random number to be passed via
chosen/kaslr-seed propert. sec_firmware generates this random seed
which can then be passed in the device tree node.

sec_firmware reserves JR3 for it's own usage. Node for JR3 is
removed from device-tree.

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
7 years agoarch/arm/cpu/arm926ejs/spear/cpu.c: guard do_switch_ecc() with CONFIG_NAND_FSMC
Thomas Petazzoni [Tue, 15 Aug 2017 20:52:45 +0000 (22:52 +0200)]
arch/arm/cpu/arm926ejs/spear/cpu.c: guard do_switch_ecc() with CONFIG_NAND_FSMC

do_switch_ecc() calls fsmc_nand_switch_ecc(), which is a direct
function call into drivers/mtd/nand/fsmc_nand.c. However, this
function is not guarded by CONFIG_NAND_FSMC, which results to a build
failure if CONFIG_NAND_FSMC is disabled.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
7 years agoboard/spear/common: move code to arch/arm/cpu/arm926ejs/spear/
Thomas Petazzoni [Tue, 15 Aug 2017 20:52:44 +0000 (22:52 +0200)]
board/spear/common: move code to arch/arm/cpu/arm926ejs/spear/

The code in board/spear/common/ is not board-specific but
SoC-specific. Therefore, boards from other vendors than "spear" may
want to re-use this code, which is currently difficult with the code
being placed in board/spear/common/.

Since this code really is SoC-specific, this commit moves it to
arch/arm/cpu/arm926ejs/spear/, with the rest of the SPEAr related
code.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
7 years agoboard: atmel: Use the new PIT timer driver
Wenyou.Yang@microchip.com [Tue, 15 Aug 2017 09:40:27 +0000 (17:40 +0800)]
board: atmel: Use the new PIT timer driver

Use the Atmel PIT timer driver which supports the driver model
and device tree.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
7 years agodriver: timer: Add the Atmel PIT timer driver
Wenyou.Yang@microchip.com [Tue, 15 Aug 2017 09:40:26 +0000 (17:40 +0800)]
driver: timer: Add the Atmel PIT timer driver

Add the new Atmel PIT timer driver, which supports the driver model
and device tree.

Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
7 years agopowerpc: Rework interrupt_init_cpu()
Tom Rini [Mon, 14 Aug 2017 02:44:37 +0000 (22:44 -0400)]
powerpc: Rework interrupt_init_cpu()

The function interrupt_init_cpu() is given an int return type but does
not return anything but 0.  Rework this to be a void function.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Mario Six <mario.six@gdsys.cc>
7 years agofs: fat: fix fatwrite overflow calculation
Reno Farnesi [Sun, 13 Aug 2017 19:16:17 +0000 (15:16 -0400)]
fs: fat: fix fatwrite overflow calculation

The overflow calculation was incorrect. Adding the start block of the
partition is not needed because the sectors are already relative to the
beginning of the partition. If you attempted to write a file smaller
than cur_part_info.start blocks on a full partition the old calculation
fails to catch the overflow. This would cause an infinite loop in the
determine_fatent function.

Old, incorrect calculation:

ending sector of new file = start sector + file size (in sectors)
last sector = partition start + total sectors on the partition

Adding the partition start block number is not needed because sectors
are already relative to the start of the partition.

New calculation:

ending sector of new file = start sector + file size (in sectors)
last sector = total sectors on the partition

Signed-off-by: Reno Farnesi <nfarnesi4@gmail.com>
7 years agoarm: dts: am33xx: sync DTS with Linux 4.13-rc4
Suniel Mahesh [Sat, 12 Aug 2017 07:56:38 +0000 (13:26 +0530)]
arm: dts: am33xx: sync DTS with Linux 4.13-rc4

This re-syncs AM33xx DTS file with current file from
Linux v4.13-rc4 to ensure a consistent configuration. Upstream
Linux removed the redundant Interrupt-parent property from mmc,
mac, lcdc and tscadc sub nodes.

Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoram: kconfig: s/SPL/TPL/ in TPL_RAM help text
Jagan Teki [Fri, 25 Aug 2017 14:46:00 +0000 (20:16 +0530)]
ram: kconfig: s/SPL/TPL/ in TPL_RAM help text

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
7 years agorpi: Enable USB keyboard support
Simon Glass [Fri, 25 Aug 2017 01:45:31 +0000 (19:45 -0600)]
rpi: Enable USB keyboard support

This is currently disabled, so USB keyboards are not detected in U-Boot.
Enable this option to fix that.

Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Paul Barker <pbarker@toganlabs.com>
7 years agoARM: rmobile: Enable MMC and USB DM on ULCB
Marek Vasut [Sun, 20 Aug 2017 15:13:50 +0000 (17:13 +0200)]
ARM: rmobile: Enable MMC and USB DM on ULCB

Enable the MMC and USB DM on the board since it's the modern method
and now supported by the drivers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Enable MMC and USB DM on Salvator-X
Marek Vasut [Sun, 20 Aug 2017 15:13:49 +0000 (17:13 +0200)]
ARM: rmobile: Enable MMC and USB DM on Salvator-X

Enable the MMC and USB DM on the board since it's the modern method
and now supported by the drivers.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Remove SH SDHI probing from ULCB board
Marek Vasut [Sun, 20 Aug 2017 15:13:48 +0000 (17:13 +0200)]
ARM: rmobile: Remove SH SDHI probing from ULCB board

Drop the SH SDHI bit from the board since SD now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Remove SH SDHI probing from Salvator-X board
Marek Vasut [Sun, 20 Aug 2017 15:13:47 +0000 (17:13 +0200)]
ARM: rmobile: Remove SH SDHI probing from Salvator-X board

Drop the SH SDHI bit from the board since SD now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Remove Serial SH probing from ULCB board
Marek Vasut [Sun, 20 Aug 2017 15:13:46 +0000 (17:13 +0200)]
ARM: rmobile: Remove Serial SH probing from ULCB board

Drop the Serial SH bit from the board since UART now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Remove Serial SH probing from Salvator-X board
Marek Vasut [Sun, 20 Aug 2017 15:13:45 +0000 (17:13 +0200)]
ARM: rmobile: Remove Serial SH probing from Salvator-X board

Drop the Serial SH bit from the board since UART now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Remove RAVB probing from ULCB board
Marek Vasut [Sun, 20 Aug 2017 15:13:44 +0000 (17:13 +0200)]
ARM: rmobile: Remove RAVB probing from ULCB board

Drop the RAVB bit from the board since RAVB now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Remove RAVB probing from Salvator-X board
Marek Vasut [Sun, 20 Aug 2017 15:13:43 +0000 (17:13 +0200)]
ARM: rmobile: Remove RAVB probing from Salvator-X board

Drop the RAVB bit from the board since RAVB now probes from DT instead.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Enable HUSH parser
Marek Vasut [Sun, 20 Aug 2017 15:13:42 +0000 (17:13 +0200)]
ARM: rmobile: Enable HUSH parser

The HUSH parser was disabled somewhere along the way, reenable it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Alexandru Gagniuc <alex.g@adaptrum.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Enable KSZ90X1 PHY on Salvator-X
Marek Vasut [Sun, 20 Aug 2017 15:13:41 +0000 (17:13 +0200)]
ARM: rmobile: Enable KSZ90X1 PHY on Salvator-X

Commit da3b9e7fd6a1 (Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig)
broke ethernet support on R8A779x Salvator-X boards by disabling the
KSZ90x1 PHY in Kconfig. Reenable it.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Alexandru Gagniuc <alex.g@adaptrum.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoARM: rmobile: Add u-boot, dm-pre-reloc to clock nodes on Gen3
Marek Vasut [Sun, 20 Aug 2017 15:13:40 +0000 (17:13 +0200)]
ARM: rmobile: Add u-boot, dm-pre-reloc to clock nodes on Gen3

We need the clock available very early, add the u-boot,dm-pre-reloc
DT property on those nodes, so they come up very in the process.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agoclk: rmobile: Split R8A7795 and R8A7796 core clock tables
Marek Vasut [Sun, 20 Aug 2017 15:13:39 +0000 (17:13 +0200)]
clk: rmobile: Split R8A7795 and R8A7796 core clock tables

The R8A7795 and R8A7796 tables use different constants to identify
clock in DT, so split the tables and use the correct constants on
R8A7795. This fixes UART clock misconfiguration on R8A7795.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
7 years agox86: tangier: kconfig: Guard tangier-specific options
Bin Meng [Sun, 20 Aug 2017 11:33:46 +0000 (04:33 -0700)]
x86: tangier: kconfig: Guard tangier-specific options

These options should not be exposed to other platforms.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
7 years agox86: bayleybay: Adjust VGA rom address
Bin Meng [Sun, 20 Aug 2017 11:32:51 +0000 (04:32 -0700)]
x86: bayleybay: Adjust VGA rom address

Adjust VGA rom address to 0xfffb0000 so that u-boot.rom image can be
built again.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
7 years agox86: baytrail: Fix turbo enable
Bin Meng [Thu, 17 Aug 2017 08:10:43 +0000 (01:10 -0700)]
x86: baytrail: Fix turbo enable

CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED must be turned on for Baytrail.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
7 years agox86: Convert CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED to Kconfig
Bin Meng [Thu, 17 Aug 2017 08:10:42 +0000 (01:10 -0700)]
x86: Convert CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED to Kconfig

This converts CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED to a Kconfig option.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
7 years agox86: dfi-bt700: Select SERIAL_RX_BUFFER via Kconfig
Stefan Roese [Wed, 16 Aug 2017 15:37:18 +0000 (17:37 +0200)]
x86: dfi-bt700: Select SERIAL_RX_BUFFER via Kconfig

To support more input characters (longer stings pasted into the U-Boot
prompt) without dropping, lets selects the recently added UART RX
buffer for these boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
7 years agox86: conga-qeval20-qa3-e3845: Select SERIAL_RX_BUFFER via Kconfig
Stefan Roese [Wed, 16 Aug 2017 15:37:17 +0000 (17:37 +0200)]
x86: conga-qeval20-qa3-e3845: Select SERIAL_RX_BUFFER via Kconfig

To support more input characters (longer stings pasted into the U-Boot
prompt) without dropping, lets selects the recently added UART RX
buffer for these boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
7 years agoserial: serial-uclass: Add generic serial RX buffer support
Stefan Roese [Wed, 16 Aug 2017 15:37:16 +0000 (17:37 +0200)]
serial: serial-uclass: Add generic serial RX buffer support

Pasting longer lines into the U-Boot console prompt sometimes leads to
characters missing. One problem here is the small 16-byte FIFO of the
legacy NS16550 UART, e.g. on x86 platforms.

This patch now introduces a Kconfig option to enable RX buffer support
for all DM based serial drivers. With this option enabled, I was
able paste really long lines into the U-Boot console, without any
characters missing.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
7 years agoRevert "serial: ns16550: Add RX interrupt buffer support"
Stefan Roese [Wed, 16 Aug 2017 15:37:15 +0000 (17:37 +0200)]
Revert "serial: ns16550: Add RX interrupt buffer support"

This reverts commit 6822cf3ec7c8768b8727573b8f4b2cb3d870b881.

As Bin Meng has tested and pointed out, we don't need the RX interrupt
for the RX buffer support at all. Just reading all available characters
into a buffer is sufficient to solve the problem with the dropped
characters upon long lines pasted into the U-Boot prompt. Since this
RX buffer support can be implemented in a generic way, without any
device specifica (e.g. for the ns16550), I'll post a new patch with
a new serial RX buffer support for DM, which all DM based serial
drivers can use.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
7 years agovbe: Drop vbe_get_video_info()
Bin Meng [Wed, 16 Aug 2017 14:35:36 +0000 (07:35 -0700)]
vbe: Drop vbe_get_video_info()

With DM video, this is not used any more. Drop it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
7 years agox86: kconfig: Imply CMD_PCI
Bin Meng [Wed, 16 Aug 2017 12:46:49 +0000 (05:46 -0700)]
x86: kconfig: Imply CMD_PCI

Let's imply the 'pci' command to access the de facto interconnect
bus in an x86 system.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
7 years agox86: fsp: Configure SPI opcode registers before SPI is locked down
Bin Meng [Wed, 16 Aug 2017 05:38:31 +0000 (22:38 -0700)]
x86: fsp: Configure SPI opcode registers before SPI is locked down

Some Intel FSP (like Braswell) does SPI lock-down during the call
to fsp_notify(INIT_PHASE_BOOT). But before SPI lock-down is done,
it's bootloader's responsibility to configure the SPI controller's
opcode registers properly otherwise SPI controller driver doesn't
know how to communicate with the SPI flash device.

This introduces a Kconfig option CONFIG_FSP_LOCKDOWN_SPI for such
FSPs. When it is on, U-Boot will configure the SPI opcode registers
before the lock-down.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
7 years agox86: ich-spi: Move opcode registers configuration to another routine
Bin Meng [Wed, 16 Aug 2017 05:38:30 +0000 (22:38 -0700)]
x86: ich-spi: Move opcode registers configuration to another routine

At present the ICH SPI opcode registers configuration is done in the
ich_spi_remove() routine, a little bit weird but that's how current.
Linux MTD driver works. This changes to move the opcode registers
configuration to a separate routine ich_spi_config_opcode() which
might be called by U-Boot itself as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
7 years agox86: ich-spi: Don't read cached lock status
Bin Meng [Wed, 16 Aug 2017 05:38:29 +0000 (22:38 -0700)]
x86: ich-spi: Don't read cached lock status

At present the ICH SPI controller driver reads the controller lock
status from its register in the probe routine and saves the lock
status to a member of priv. Later the driver uses the cached status
from priv to judge whether the controller setting is locked and do
different setup.

But such logic is only valid when there is only the SPI controller
driver that touches the SPI hardware. In fact the lock status change
can be trigged outside the driver, eg: during the fsp_notify() call
when Intel FSP is used.

This changes the driver to read the lock status every time when an
SPI transfer is initiated instead of reading the cached one.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
7 years agox86: ich-spi: Remove unnecessary assignment in ich_init_controller()
Bin Meng [Wed, 16 Aug 2017 05:38:28 +0000 (22:38 -0700)]
x86: ich-spi: Remove unnecessary assignment in ich_init_controller()

There is no need to do another assignment to ich7_spi.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
7 years agox86: ich-spi: Remove spi_write_protect_region()
Bin Meng [Wed, 16 Aug 2017 05:38:27 +0000 (22:38 -0700)]
x86: ich-spi: Remove spi_write_protect_region()

This routine is not called anywhere.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
7 years agoi2c: muxes: add i2c gpio multiplexer driver
Peng Fan [Mon, 14 Aug 2017 10:00:05 +0000 (18:00 +0800)]
i2c: muxes: add i2c gpio multiplexer driver

Add an i2c mux driver providing access to i2c bus segments using a
hardware MUX sitting on a master bus and controlled through gpio pins.

E.G. something like:

         ----------              ----------  Bus segment 1   - - - - -
        |          | SCL/SDA    |          |-------------- |           |
        |          |------------|          |
        |          |            |          | Bus segment 2 |           |
        |  Linux   | GPIO 1..N  |   MUX    |---------------   Devices
        |          |------------|          |               |           |
        |          |            |          | Bus segment M
        |          |            |          |---------------|           |
         ----------              ----------                  - - - - -

SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M
according to the settings of the GPIO pins 1..N.

Note commit log from kernel
commit 92ed1a76("i2c: Add generic I2C multiplexer using GPIO API")

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com> (i.MX6QP-Sabreauto)
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Simon Glass <sjg@chromium.org>
7 years agoi2c: add i2c driver for stm32
Patrice Chotard [Wed, 9 Aug 2017 12:45:27 +0000 (14:45 +0200)]
i2c: add i2c driver for stm32

Add i2c driver which can be used on both STM32F7 and STM32H7.
This I2C block supports the following features:
 _ Slave and master modes
 _ Multimaster capability
 _ Standard-mode (up to 100 kHz)
 _ Fast-mode (up to 400 kHz)
 _ Fast-mode Plus (up to 1 MHz)
 _ 7-bit and 10-bit addressing mode
 _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
 _ All 7-bit addresses acknowledge mode
 _ General call
 _ Programmable setup and hold times
 _ Easy to use event management
 _ Optional clock stretching
 _ Software reset

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
7 years agofastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long
Tom Rini [Tue, 22 Aug 2017 12:20:02 +0000 (08:20 -0400)]
fastboot: Ensure we treat CONFIG_FASTBOOT_BUF_ADDR as long

Otherwise:
drivers/usb/gadget/f_fastboot.c:564:32: warning: format "%lx" expects
argument of type "long unsigned int", but argument 3 has type "unsigned
int" [-Wformat=]

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agomtd: cfi: staticize functions
Marek Vasut [Sun, 20 Aug 2017 15:20:00 +0000 (17:20 +0200)]
mtd: cfi: staticize functions

Staticize a few functions and variables which are no longer exposed.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
7 years agoMerge git://www.denx.de/git/u-boot-marvell
Tom Rini [Mon, 21 Aug 2017 11:17:15 +0000 (07:17 -0400)]
Merge git://www.denx.de/git/u-boot-marvell

7 years agoMerge git://git.denx.de/u-boot-usb
Tom Rini [Mon, 21 Aug 2017 11:16:56 +0000 (07:16 -0400)]
Merge git://git.denx.de/u-boot-usb

7 years agoMerge git://git.denx.de/u-boot-uniphier
Tom Rini [Mon, 21 Aug 2017 11:16:16 +0000 (07:16 -0400)]
Merge git://git.denx.de/u-boot-uniphier

 - Fix unmet direct dependencies warning
 - Remove old sLD3 SoC support
 - Update reset data
 - Add dr_mode DT property to avoid warning

7 years agoARM: mvebu: set correct mem_size for db-88f6820-amc
Chris Packham [Thu, 17 Aug 2017 10:27:03 +0000 (22:27 +1200)]
ARM: mvebu: set correct mem_size for db-88f6820-amc

The db-88f6820-amc has four chips with 2Gb density giving a total of 1GB
DRAM. Update the board_topology_map to reflect the correct
configuration.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
7 years agodoc: license: Add license header to the README.dfutftp file
Lukasz Majewski [Thu, 17 Aug 2017 21:10:49 +0000 (23:10 +0200)]
doc: license: Add license header to the README.dfutftp file

Signed-off-by: Lukasz Majewski <lukma@denx.de>
7 years agofb_mmc.c: Correct blk_dread() return value checks
Tom Rini [Tue, 15 Aug 2017 01:00:44 +0000 (21:00 -0400)]
fb_mmc.c: Correct blk_dread() return value checks

The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agocommon/fb_mmc.c: Fix warnings about casts
Tom Rini [Sat, 10 Jun 2017 13:15:37 +0000 (09:15 -0400)]
common/fb_mmc.c: Fix warnings about casts

When building the flash zImage code on aarch64 we see warnings about
pointer size casts.  Use uintptr_t instead to correct these.

Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-By: Sam Protsenko <semen.protsenko@linaro.org>
7 years agofastboot: avoid printing invalid data
John Keeping [Mon, 19 Sep 2016 09:59:40 +0000 (10:59 +0100)]
fastboot: avoid printing invalid data

There is no guarantee that commands are null-terminated in the USB
request buffer, so limit the length of data that is printed.

Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Steve Rae <steve.rae@raedomain.com>
7 years agoFix fastboot boot address
Peter Chubb [Thu, 8 Sep 2016 20:51:57 +0000 (20:51 +0000)]
Fix fastboot boot address

Fastboot loads an image at CONFIG_FASTBOOT_BUF_ADDR, but currently
tells do_bootm() to look for an image at $loadaddr.  This breaks if
CONFIG_FASTBOOT_BUF_ADDR is different from the current user-set
loadaddr.

Instead, tell do_bootm() to pick up the image where it was laoded.

Signed-off-by: Peter Chubb <peter.chubb@data61.csiro.au>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Steve Rae <steve.rae@raedomain.com>
7 years agousb: ehci: Convert CONFIG_USB_EHCI_PCI to Kconfig
Bin Meng [Wed, 9 Aug 2017 07:21:54 +0000 (00:21 -0700)]
usb: ehci: Convert CONFIG_USB_EHCI_PCI to Kconfig

This converts CONFIG_USB_EHCI_PCI to a Kconfig option, and updates
all boards that use it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
7 years agoenv: Replace all open-coded gd->env_valid values with ENV_ flags
Simon Glass [Sun, 20 Aug 2017 10:45:15 +0000 (04:45 -0600)]
env: Replace all open-coded gd->env_valid values with ENV_ flags

Some of these were missed in the conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
7 years agoenv: Allow env_load() to detect errors
Simon Glass [Sun, 20 Aug 2017 10:45:14 +0000 (04:45 -0600)]
env: Allow env_load() to detect errors

Now that we have errors available in the environment driver's load()
method, check the return valid.

Signed-off-by: Simon Glass <sjg@chromium.org>
7 years agoenv: Correct case of no sub-init function
Tom Rini [Sun, 20 Aug 2017 02:27:57 +0000 (22:27 -0400)]
env: Correct case of no sub-init function

With the change to the environment code to remove the common init stage
of pointing to the default environment and setting it as valid, combined
with the change to switch gd->env_valid from 0/1/2 to an enum we now
must set env_valid to one of the enum values rather than an int.  And in
this case, not only was setting it to an int wrong, it was now the wrong
value.  Finally, in the case of ENV_IS_NOWHERE we must still say that
our envionrment is invalid after init for things to continue to
function.

Fixes: 7938822a6b75 ("env: Drop common init() functions")
Tested-by: Marek Vasut <marek.vasut@gmail.com>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v3:
- Actually include changes for env/nowhere.c

7 years agoARM: dts: uniphier: add dr_mode property to dwc3 node
Masahiro Yamada [Sun, 13 Aug 2017 00:01:17 +0000 (09:01 +0900)]
ARM: dts: uniphier: add dr_mode property to dwc3 node

Since commit 576e3cc700c5 ("usb: host: xhci-dwc3: Add dual role mode
support from DT"), warning is displayed if dr_mode is not specified.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoreset: uniphier: refactor reset data and add NAND/eMMC reset lines
Masahiro Yamada [Sun, 13 Aug 2017 00:01:16 +0000 (09:01 +0900)]
reset: uniphier: refactor reset data and add NAND/eMMC reset lines

  - Merge sys_reset data of LD4, Pro4, sLD8 and Pro5

  - Merge sys_reset data of LD11 and LD20

  - Use primitive UNIPHIER_RESETX() macro because bit assignments for
    system reset will be changed for every SoC in the future

  - Add NAND and eMMC resets

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoRevert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"
Masahiro Yamada [Sun, 13 Aug 2017 00:01:15 +0000 (09:01 +0900)]
Revert "ARM: uniphier: fix ROM boot mode for PH1-sLD3"

This reverts commit 82d075e79fa509ffb8ecd8dd2dc216929d6e8289.

Commit 82d075e79fa5 ("ARM: uniphier: fix ROM boot mode for PH1-sLD3")
was a workaround for sLD3.  Now the sLD3 SoC support has been removed.

Revert it to allow to simplify the init code.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoRevert "ARM: uniphier: move lowlevel debug init code after page table switch"
Masahiro Yamada [Sun, 13 Aug 2017 00:01:14 +0000 (09:01 +0900)]
Revert "ARM: uniphier: move lowlevel debug init code after page table switch"

This reverts commit bcc51c1512a3deb6a9fdd37362c6dde32ad3da23.

Commit bcc51c1512a3 ("ARM: uniphier: move lowlevel debug init code
after page table switch") was intended to support lowlevel debug for
sLD3.  Now the sLD3 SoC support has been removed.

Revert it to allow to enable lowlevel debug earlier.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoARM: uniphier: remove sLD3 SoC support
Masahiro Yamada [Sun, 13 Aug 2017 00:01:13 +0000 (09:01 +0900)]
ARM: uniphier: remove sLD3 SoC support

This SoC is too old.  It is difficult to maintain any longer.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoclk: uniphier: fix unmet direct dependencies warning
Masahiro Yamada [Sun, 20 Aug 2017 13:59:36 +0000 (22:59 +0900)]
clk: uniphier: fix unmet direct dependencies warning

Since commit f0776a551764 ("spl: dm: Kconfig: SPL_CLK depends on
SPL_DM"), the following warning is displayed:

  $ make uniphier_v8_defconfig
  warning: (ARCH_ZYNQ && ARCH_ZYNQMP && STM32F7 && CLK_UNIPHIER) selects
  SPL_CLK which has unmet direct dependencies (CLK && SPL_DM)

While I am here, I am removing the prompt to make it user-unconfigurable
option so that "select CLK_UNIPHIER" can be omitted.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
7 years agoFix 'notes' typos
Anatolij Gustschin [Fri, 18 Aug 2017 15:58:51 +0000 (17:58 +0200)]
Fix 'notes' typos

s/notes/nodes

Signed-off-by: Anatolij Gustschin <agust@denx.de>
7 years agoenv: Sort selection of default choices
Andy Shevchenko [Fri, 18 Aug 2017 10:14:47 +0000 (13:14 +0300)]
env: Sort selection of default choices

It would be easier to catch out which platform is using which default.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
7 years agoarm, at91: fix taurus board
Heiko Schocher [Wed, 16 Aug 2017 07:47:45 +0000 (09:47 +0200)]
arm, at91: fix taurus board

since commit: b529993e0222 "spl: add hierarchical defaults for SPL_LDSCRIPT"

taurus board stopped working. Use the ldscript from
arch/arm/cpu/u-boot-spl.lds (as before this patch) fixed it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agocommon/board_f.c: remove CONFIG_SYS_GENERIC_GLOBAL_DATA
Thomas Petazzoni [Tue, 15 Aug 2017 21:11:02 +0000 (23:11 +0200)]
common/board_f.c: remove CONFIG_SYS_GENERIC_GLOBAL_DATA

CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or
platform, so support for it can be dropped.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
7 years agoARM: hisilicon: hikey: Fix eMMC with latest ATF & U-Boot
Peter Griffin [Tue, 15 Aug 2017 16:18:16 +0000 (17:18 +0100)]
ARM: hisilicon: hikey: Fix eMMC with latest ATF & U-Boot

ATF can leave the MMC IP in a state where U-Boot mmc driver
can't enumerate the eMMC.

This patch provides a mmc0_reset_clk() function like we
already so do sd card controller which resets the IP
when entering U-Boot.

With this patch applied eMMC partitions are successfully
enumerated again.

=> mmc dev 0
switch to partitions #0, OK
mmc0(part 0) is current device
=> mmc part

Partition Map for MMC device 0  --   Partition Type: EFI

Part Start LBA End LBA Name
Attributes
Type GUID
Partition GUID
  1 0x00000800 0x00000fff "vrl"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 496847ab-56a1-4cd5-a1ad-47f4acf055c9
  2 0x00001000 0x000017ff "vrl_backup"
attrs: 0x0000000000000000
type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7
guid: 61a36fc1-8efb-4899-84d8-b61642efa723
  3 0x00001800 0x00001fff "mcuimage"
<snip>

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
7 years agofs/fat: Correct blk_dread() return value check
Tom Rini [Tue, 15 Aug 2017 01:02:08 +0000 (21:02 -0400)]
fs/fat: Correct blk_dread() return value check

The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agospl: spl_mmc.c Correct blk_dread() return value check
Tom Rini [Tue, 15 Aug 2017 01:01:30 +0000 (21:01 -0400)]
spl: spl_mmc.c Correct blk_dread() return value check

The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agocmd/read.c: Fix checking blk_dread return value
Tom Rini [Tue, 15 Aug 2017 00:58:50 +0000 (20:58 -0400)]
cmd/read.c: Fix checking blk_dread return value

The function blk_dread will return -ENOSYS on failure or on success the
number of blocks read, which must be the number asked to read (otherwise
it failed somewhere).  Correct this check.

Reported-by: Coverity (CID: 166335)
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agomtdparts: Fix various issues reported by Coverity
Tom Rini [Tue, 15 Aug 2017 00:42:27 +0000 (20:42 -0400)]
mtdparts: Fix various issues reported by Coverity

Now that sandbox is building cmd/mtdparts.c Coverity has looked at the
code and found a number of issues.  In index_partitions() it is possible
that part will be NULL, so re-work the checks and debug statements to
take this into account.  We have a number of string buffers that we
print to in the exact size of, and use string functions on, so we need
to ensure they are large enough to be NULL terminated.  In
device_parse() it is not possible for num_partitions to be 0 (we would
have hit a different error first) so remove logically dead code.
Finally, in parse_mtdparts() if we have an error we need to free the
memory allocated to dev.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Coverity (CID: 166334, 166333, 166332, 166329, 166328)
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agohash: Compile only hardware or software versions of SHA algorithms
Tom Rini [Mon, 14 Aug 2017 20:38:07 +0000 (16:38 -0400)]
hash: Compile only hardware or software versions of SHA algorithms

Commit 089df18bfe9d ("lib: move hash CONFIG options to Kconfig") moved
CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and
CONFIG_SHA_PROG_HW_ACCEL config options to Kconfig. So in the case of
SPL, CONFIG_SPL_HASH_SUPPORT enables CONFIG_SHA1 and CONFIG_SHA256 which
enables SHA SW library by default.  But in the case of platforms with
SHA HW library support, SHA SW library becomes redundant and increases
size of SPL by approx 18K.  Rework the code so that we have named
members and only have either software or hardware versions of the
algorithm, depending on the relevant config options.  Update the comment
around hash_algo to reflect this as well.

Reported-by: Sumit Garg <sumit.garg@nxp.com>
Cc: Sumit Garg <sumit.garg@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sumit Garg <sumit.garg@nxp.com>
7 years agoMakefile: honor PYTHON configuration properly
Clément Bœsch [Mon, 14 Aug 2017 06:59:11 +0000 (08:59 +0200)]
Makefile: honor PYTHON configuration properly

On some systems `python` is `python3` (for instance, Archlinux). The
`PYTHON` variable can be used to point to `python2` to have a successful
build.

The use of `PYTHON` is currently limited in the Makefile and needs to be
extended in other places:

First, pylibfdt is required to be a Python 2 binding (binman imports
pylibfdt and is only compatible Python 2), so its setup.py needs to be
called accordingly. An alternative would be to change the libfdt
setup.py shebang to python2, but the binding is actually portable. Also,
it would break on system where there is no such thing as `python2`.

Secondly, the libfdt import checks need to be done against Python 2 as
well since the Python 2 compiled modules (in this case _libdft.so) can
not be imported from Python 3.

Note on the libfdt imports: "@if ! PYTHONPATH=tools $(PYTHON) -c 'import
libfdt'; then..." is probably simpler than the currently sub-optimal
pipe.
Reviewed-by: Jonathan Gray <jsg@jsg.id.au>
7 years agoMerge git://git.denx.de/u-boot-video
Tom Rini [Sun, 20 Aug 2017 02:11:05 +0000 (22:11 -0400)]
Merge git://git.denx.de/u-boot-video

7 years agolcd: avoid possible NULL dereference
xypron.glpk@gmx.de [Sun, 30 Jul 2017 19:59:23 +0000 (21:59 +0200)]
lcd: avoid possible NULL dereference

Do not dereference bmp before the check if it is NULL.

The problem was indicated by cppcheck.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agoMerge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Tom Rini [Fri, 18 Aug 2017 22:24:58 +0000 (18:24 -0400)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

EFI Fixes for 2017.09:
  - Fix GOP w/o display
  - Fix LocateHandle
  - Fix exit return value truncation
  - Fix missing EFIAPI in efi_locate_handle (for x86)

7 years agoMerge branch 'master' of git://git.denx.de/u-boot-mmc
Tom Rini [Fri, 18 Aug 2017 22:24:36 +0000 (18:24 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mmc

7 years agoMerge branch 'master' of git://git.denx.de/u-boot-coldfire
Tom Rini [Fri, 18 Aug 2017 22:24:08 +0000 (18:24 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-coldfire

7 years agoMerge branch 'master' of git://git.denx.de/u-boot-rockchip
Tom Rini [Fri, 18 Aug 2017 22:23:58 +0000 (18:23 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-rockchip

7 years agorockchip: rk322x: pinctrl: fix IO MASK error on sdcard pin
Kever Yang [Thu, 17 Aug 2017 07:17:36 +0000 (15:17 +0800)]
rockchip: rk322x: pinctrl: fix IO MASK error on sdcard pin

Fix the IOMUX setting for SDcard CMD pin at the same time.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agorockchip: rk322x: pinctrl: using compatible name same with dts
Kever Yang [Thu, 17 Aug 2017 07:17:35 +0000 (15:17 +0800)]
rockchip: rk322x: pinctrl: using compatible name same with dts

The dts from kernel is using rk3228-pinctrl as compatible name,
need to sync with it to make the driver work.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agorockchip: rk322x: update MACRO for mmc clksel reg
Kever Yang [Thu, 3 Aug 2017 12:07:45 +0000 (20:07 +0800)]
rockchip: rk322x: update MACRO for mmc clksel reg

The description for eMMC/SDIO/SDMMC src is not correct,
update the CRU_CLKSEL11_CON value definition according to TRM.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agorockchip: rk322x: update dram bank size
Kever Yang [Fri, 21 Jul 2017 10:21:07 +0000 (18:21 +0800)]
rockchip: rk322x: update dram bank size

The DRAM start address is not 0, so need to update the last bank size
as:
DRAM start addr + DRAM_SIZE - last bank start addr

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
7 years agorockchip: rk3399: spl: remove unused header inclusion
Philipp Tomsich [Wed, 16 Aug 2017 17:24:02 +0000 (19:24 +0200)]
rockchip: rk3399: spl: remove unused header inclusion

fdtdec.h is included, but not used in rk3399-board-spl.c: remove the
'#include'-statement.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agorockchip: dts: rk3399-evb: remove redundant gmac node
Kever Yang [Wed, 9 Aug 2017 10:51:30 +0000 (18:51 +0800)]
rockchip: dts: rk3399-evb: remove redundant gmac node

There are two same gmac node, remove one.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
7 years agoefi_loader: do not cast return value in EFI_EXIT
xypron.glpk@gmx.de [Thu, 17 Aug 2017 16:57:36 +0000 (18:57 +0200)]
efi_loader: do not cast return value in EFI_EXIT

UEFI API functions have different return types.
Some return a value of type EFI_STATUS other don't.

We therefore should not cast the return value of EFI_EXIT
to another type than the expression passed to EFI_EXIT.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>