hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()

Some architectures can have their hugetlb pages down at the lowest PTE
level: their huge_pte_alloc() using pte_alloc_map(), but without any
following pte_unmap().  Since none of these arches uses CONFIG_HIGHPTE,
this is not seen as a problem at present; but would become a problem if
forthcoming changes were to add an rcu_read_lock() into pte_offset_map(),
with the rcu_read_unlock() expected in pte_unmap().

Similarly in their huge_pte_offset(): pte_offset_kernel() is good enough
for that, but it's probably less confusing if we define pte_offset_huge()
along with pte_alloc_huge().  Only define them without CONFIG_HIGHPTE: so
there would be a build error to signal if ever more work is needed.

For ease of development, define these now for 6.4-rc1, ahead of any use:
then architectures can integrate patches using them, independent from mm.

Link: https://lkml.kernel.org/r/ae9e7d98-8a3a-cfd9-4762-bcddffdf96cf@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

maple_tree: fix allocation in mas_sparse_area()

In the case of reverse allocation, mas->index and mas->last do not point
to the correct allocation range, which will cause users to get incorrect
allocation results, so fix it.  If the user does not use it in a specific
way, this bug will not be triggered.

This is a bug, but only VMA uses it now, the way VMA is used now will
not trigger it.  There is a possibility that a user will trigger it in
the future.

Also re-check whether the size is still satisfied after the lower bound
was increased, which is a corner case and is incorrect in previous
versions.

Link: https://lkml.kernel.org/r/20230419093625.99201-1-zhangpeng.00@bytedance.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: do not increment pgfault stats when page fault handler retries

If the page fault handler requests a retry, we will count the fault
multiple times.  This is a relatively harmless problem as the retry paths
are not often requested, and the only user-visible problem is that the
fault counter will be slightly higher than it should be.  Nevertheless,
userspace only took one fault, and should not see the fact that the kernel
had to retry the fault multiple times.

Move page fault accounting into mm_account_fault() and skip incomplete
faults which will be accounted upon completion.

Link: https://lkml.kernel.org/r/20230419175836.3857458-1-surenb@google.com
Fixes: d065bd810b6d ("mm: retry page fault when blocking on disk transfer")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zsmalloc: allow only one active pool compaction context

zsmalloc pool can be compacted concurrently by many contexts,
e.g.

 cc1 handle_mm_fault()
      do_anonymous_page()
       __alloc_pages_slowpath()
        try_to_free_pages()
         do_try_to_free_pages(
          lru_gen_shrink_node()
           shrink_slab()
            do_shrink_slab()
             zs_shrinker_scan()
              zs_compact()

Pool compaction is currently (basically) single-threaded as
it is performed under pool->lock. Having multiple compaction
threads results in unnecessary contention, as each thread
competes for pool->lock. This, in turn, affects all zsmalloc
operations such as zs_malloc(), zs_map_object(), zs_free(), etc.

Introduce the pool->compaction_in_progress atomic variable,
which ensures that only one compaction context can run at a
time. This reduces overall pool->lock contention in (corner)
cases when many contexts attempt to shrink zspool simultaneously.

Link: https://lkml.kernel.org/r/20230418074639.1903197-1-senozhatsky@chromium.org
Fixes: c0547d0b6a4b ("zsmalloc: consolidate zs_pool's migrate_lock and size_class's locks")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add new selftests for KSM

This adds three new tests to the selftests for KSM.  These tests use the
new prctl API's to enable and disable KSM.

1) add new prctl flags to prctl header file in tools dir

   This adds the new prctl flags to the include file prct.h in the
   tools directory.  This makes sure they are available for testing.

2) add KSM prctl merge test to ksm_tests

   This adds the -t option to the ksm_tests program.  The -t flag
   allows to specify if it should use madvise or prctl ksm merging.

3) add two functions for debugging merge outcome for ksm_tests

   This adds two functions to report the metrics in /proc/self/ksm_stat
   and /sys/kernel/debug/mm/ksm. The debug output is enabled with the
   -d option.

4) add KSM prctl test to ksm_functional_tests

   This adds a test to the ksm_functional_test that verifies that the
   prctl system call to enable / disable KSM works.

5) add KSM fork test to ksm_functional_test

   Add fork test to verify that the MMF_VM_MERGE_ANY flag is inherited
   by the child process.

Link: https://lkml.kernel.org/r/20230418051342.1919757-4-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add new KSM process and sysfs knobs

This adds the general_profit KSM sysfs knob and the process profit metric
knobs to ksm_stat.

1) expose general_profit metric

   The documentation mentions a general profit metric, however this
   metric is not calculated.  In addition the formula depends on the size
   of internal structures, which makes it more difficult for an
   administrator to make the calculation.  Adding the metric for a better
   user experience.

2) document general_profit sysfs knob

3) calculate ksm process profit metric

   The ksm documentation mentions the process profit metric and how to
   calculate it.  This adds the calculation of the metric.

4) mm: expose ksm process profit metric in ksm_stat

   This exposes the ksm process profit metric in /proc/<pid>/ksm_stat.
   The documentation mentions the formula for the ksm process profit
   metric, however it does not calculate it.  In addition the formula
   depends on the size of internal structures.  So it makes sense to
   expose it.

5) document new procfs ksm knobs

Link: https://lkml.kernel.org/r/20230418051342.1919757-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: add new api to enable ksm per process

Patch series "mm: process/cgroup ksm support", v9.

So far KSM can only be enabled by calling madvise for memory regions.  To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.

Use case 1:
  The madvise call is not available in the programming language.  An
  example for this are programs with forked workloads using a garbage
  collected language without pointers.  In such a language madvise cannot
  be made available.

  In addition the addresses of objects get moved around as they are
  garbage collected.  KSM sharing needs to be enabled "from the outside"
  for these type of workloads.

Use case 2:
  The same interpreter can also be used for workloads where KSM brings
  no benefit or even has overhead.  We'd like to be able to enable KSM on
  a workload by workload basis.

Use case 3:
  With the madvise call sharing opportunities are only enabled for the
  current process: it is a workload-local decision.  A considerable number
  of sharing opportunities may exist across multiple workloads or jobs (if
  they are part of the same security domain).  Only a higler level entity
  like a job scheduler or container can know for certain if its running
  one or more instances of a job.  That job scheduler however doesn't have
  the necessary internal workload knowledge to make targeted madvise
  calls.

Security concerns:

  In previous discussions security concerns have been brought up.  The
  problem is that an individual workload does not have the knowledge about
  what else is running on a machine.  Therefore it has to be very
  conservative in what memory areas can be shared or not.  However, if the
  system is dedicated to running multiple jobs within the same security
  domain, its the job scheduler that has the knowledge that sharing can be
  safely enabled and is even desirable.

Performance:

  Experiments with using UKSM have shown a capacity increase of around 20%.

  Here are the metrics from an instagram workload (taken from a machine
  with 64GB main memory):

   full_scans: 445
   general_profit: 20158298048
   max_page_sharing: 256
   merge_across_nodes: 1
   pages_shared: 129547
   pages_sharing: 5119146
   pages_to_scan: 4000
   pages_unshared: 1760924
   pages_volatile: 10761341
   run: 1
   sleep_millisecs: 20
   stable_node_chains: 167
   stable_node_chains_prune_millisecs: 2000
   stable_node_dups: 2751
   use_zero_pages: 0
   zero_pages_sharing: 0

After the service is running for 30 minutes to an hour, 4 to 5 million
shared pages are common for this workload when using KSM.

Detailed changes:

1. New options for prctl system command
   This patch series adds two new options to the prctl system call.
   The first one allows to enable KSM at the process level and the second
   one to query the setting.

The setting will be inherited by child processes.

With the above setting, KSM can be enabled for the seed process of a cgroup
and all processes in the cgroup will inherit the setting.

2. Changes to KSM processing
   When KSM is enabled at the process level, the KSM code will iterate
   over all the VMA's and enable KSM for the eligible VMA's.

   When forking a process that has KSM enabled, the setting will be
   inherited by the new child process.

3. Add general_profit metric
   The general_profit metric of KSM is specified in the documentation,
   but not calculated.  This adds the general profit metric to
   /sys/kernel/debug/mm/ksm.

4. Add more metrics to ksm_stat
   This adds the process profit metric to /proc/<pid>/ksm_stat.

5. Add more tests to ksm_tests and ksm_functional_tests
   This adds an option to specify the merge type to the ksm_tests.
   This allows to test madvise and prctl KSM.

   It also adds a two new tests to ksm_functional_tests: one to test
   the new prctl options and the other one is a fork test to verify that
   the KSM process setting is inherited by client processes.

This patch (of 3):

So far KSM can only be enabled by calling madvise for memory regions.  To
be able to use KSM for more workloads, KSM needs to have the ability to be
enabled / disabled at the process / cgroup level.

1. New options for prctl system command

   This patch series adds two new options to the prctl system call.
   The first one allows to enable KSM at the process level and the second
   one to query the setting.

   The setting will be inherited by child processes.

   With the above setting, KSM can be enabled for the seed process of a
   cgroup and all processes in the cgroup will inherit the setting.

2. Changes to KSM processing

   When KSM is enabled at the process level, the KSM code will iterate
   over all the VMA's and enable KSM for the eligible VMA's.

   When forking a process that has KSM enabled, the setting will be
   inherited by the new child process.

  1) Introduce new MMF_VM_MERGE_ANY flag

     This introduces the new flag MMF_VM_MERGE_ANY flag.  When this flag
     is set, kernel samepage merging (ksm) gets enabled for all vma's of a
     process.

  2) Setting VM_MERGEABLE on VMA creation

     When a VMA is created, if the MMF_VM_MERGE_ANY flag is set, the
     VM_MERGEABLE flag will be set for this VMA.

  3) support disabling of ksm for a process

     This adds the ability to disable ksm for a process if ksm has been
     enabled for the process with prctl.

  4) add new prctl option to get and set ksm for a process

     This adds two new options to the prctl system call
     - enable ksm for all vmas of a process (if the vmas support it).
     - query if ksm has been enabled for a process.

3. Disabling MMF_VM_MERGE_ANY for storage keys in s390

   In the s390 architecture when storage keys are used, the
   MMF_VM_MERGE_ANY will be disabled.

Link: https://lkml.kernel.org/r/20230418051342.1919757-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230418051342.1919757-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: shrinkers: fix debugfs file permissions

The permissions for the files here are swapped as "count" is read-only and
"scan" is write-only.  While this doesn't really matter as these
permissions don't stop the files being opened for reading/writing as
appropriate, they are shown by "ls -l" and are confusing.

Link: https://lkml.kernel.org/r/20230418101906.3131303-1-john@metanate.com
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: don't check VMA write permissions if the PTE/PMD indicates write permissions

Staring at the comment "Recheck VMA as permissions can change since
migration started" in remove_migration_pte() can result in confusion,
because if the source PTE/PMD indicates write permissions, then there
should be no need to check VMA write permissions when restoring migration
entries or PTE-mapping a PMD.

Commit d3cb8bf6081b ("mm: migrate: Close race between migration completion
and mprotect") introduced the maybe_mkwrite() handling in
remove_migration_pte() in 2014, stating that a race between mprotect() and
migration finishing would be possible, and that we could end up with a
writable PTE that should be readable.

However, mprotect() code first updates vma->vm_flags / vma->vm_page_prot
and then walks the page tables to (a) set all present writable PTEs to
read-only and (b) convert all writable migration entries to readable
migration entries.  While walking the page tables and modifying the
entries, migration code has to grab the PT locks to synchronize against
concurrent page table modifications.

Assuming migration would find a writable migration entry (while holding
the PT lock) and replace it with a writable present PTE, surely mprotect()
code didn't stumble over the writable migration entry yet (converting it
into a readable migration entry) and would instead wait for the PT lock to
convert the now present writable PTE into a read-only PTE.  As mprotect()
didn't finish yet, the behavior is just like migration didn't happen: a
writable PTE will be converted to a read-only PTE.

So it's fine to rely on the writability information in the source PTE/PMD
and not recheck against the VMA as long as we're holding the PT lock to
synchronize with anyone who concurrently wants to downgrade write
permissions (like mprotect()) by first adjusting vma->vm_flags /
vma->vm_page_prot to then walk over the page tables to adjust the page
table entries.

Running test cases that should reveal such races -- mprotect(PROT_READ)
racing with page migration or THP splitting -- for multiple hours did not
reveal an issue with this cleanup.

Link: https://lkml.kernel.org/r/20230418142113.439494-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

migrate_pages_batch: fix statistics for longterm pin retry

In commit fd4a7ac32918 ("mm: migrate: try again if THP split is failed due
to page refcnt"), if the THP splitting fails due to page reference count,
we will retry to improve migration successful rate.  But the failed
splitting is counted as migration failure and migration retry, which will
cause duplicated failure counting.  So, in this patch, this is fixed via
undoing the failure counting if we decide to retry.  The patch is tested
via failure injection.

Link: https://lkml.kernel.org/r/20230416235929.1040194-1-ying.huang@intel.com
Fixes: fd4a7ac32918 ("mm: migrate: try again if THP split is failed due to page refcnt")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

userfaultfd: use helper function range_in_vma()

We can use range_in_vma() to check if dst_start, dst_start + len are
within the dst_vma range.  Minor readability improvement.

Link: https://lkml.kernel.org/r/20230417003919.930515-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

lib/show_mem.c: use for_each_populated_zone() simplify code

__show_mem() needs to iterate over all zones that have memory, we can
simplify the code by using for_each_populated_zone().

Link: https://lkml.kernel.org/r/20230417035226.4013584-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()

Both of them change the arg from page_list to folio_list when convert them
to use a folio, but not the declaration, let's correct it, also move the
reclaim_pages() from swap.h to internal.h as it only used in mm.

Link: https://lkml.kernel.org/r/20230417114807.186786-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviwed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/buffer: convert create_page_buffers to folio_create_buffers

fs/buffer do not support large folios as there are many assumptions on the
folio size to be the host page size.  This conversion is one step towards
removing that assumption.  Also this conversion will reduce calls to
compound_head() if folio_create_buffers() calls
folio_create_empty_buffers().

Link: https://lkml.kernel.org/r/20230417123618.22094-5-p.raghav@samsung.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/buffer: add folio_create_empty_buffers helper

Folio version of create_empty_buffers().  This is required to convert
create_page_buffers() to folio_create_buffers() later in the series.

It removes several calls to compound_head() as it works directly on folio
compared to create_empty_buffers().  Hence, create_empty_buffers() has
been modified to call folio_create_empty_buffers().

Link: https://lkml.kernel.org/r/20230417123618.22094-4-p.raghav@samsung.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

buffer: add folio_alloc_buffers() helper

Folio version of alloc_page_buffers() helper.  This is required to convert
create_page_buffers() to folio_create_buffers() later in the series.

alloc_page_buffers() has been modified to call folio_alloc_buffers() which
adds one call to compound_head() but folio_alloc_buffers() removes one
call to compound_head() compared to the existing alloc_page_buffers()
implementation.

Link: https://lkml.kernel.org/r/20230417123618.22094-3-p.raghav@samsung.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs/buffer: add folio_set_bh helper

Patch series "convert create_page_buffers to folio_create_buffers".

One of the first kernel panic we hit when we try to increase the block
size > 4k is inside create_page_buffers()[1].  Even though buffer.c
function do not support large folios (folios > PAGE_SIZE) at the moment,
these changes are required when we want to remove that constraint.

This patch (of 4):

The folio version of set_bh_page().  This is required to convert
create_page_buffers() to folio_create_buffers() later in the series.

Link: https://lkml.kernel.org/r/20230417123618.22094-1-p.raghav@samsung.com
Link: https://lkml.kernel.org/r/20230417123618.22094-2-p.raghav@samsung.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add tests for RO pinning vs fork()

Add a test suite (with 10 more sub-tests) to cover RO pinning against
fork() over uffd-wp.  It covers both:

  (1) Early CoW test in fork() when page pinned,
  (2) page unshare due to RO longterm pin.

They are:

  Testing wp-fork-pin on anon... done
  Testing wp-fork-pin on shmem... done
  Testing wp-fork-pin on shmem-private... done
  Testing wp-fork-pin on hugetlb... done
  Testing wp-fork-pin on hugetlb-private... done
  Testing wp-fork-pin-with-event on anon... done
  Testing wp-fork-pin-with-event on shmem... done
  Testing wp-fork-pin-with-event on shmem-private... done
  Testing wp-fork-pin-with-event on hugetlb... done
  Testing wp-fork-pin-with-event on hugetlb-private... done

CONFIG_GUP_TEST needed or they'll be skipped.

  Testing wp-fork-pin on anon... skipped [reason: Possibly CONFIG_GUP_TEST missing or unprivileged]

Note that the major test goal is on private memory, but no hurt to also run
all of them over shared because shared memory should work the same.

Link: https://lkml.kernel.org/r/20230417195317.898696-7-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: rename COW_EXTRA_LIBS to IOURING_EXTRA_LIBS

The macro and facility can be reused in other tests too.  Make it general.

Link: https://lkml.kernel.org/r/20230417195317.898696-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: extend and rename uffd pagemap test

Extend it to all types of mem, meanwhile add one parallel test when
EVENT_FORK is enabled, where uffd-wp bits should be persisted rather than
dropped.

Since at it, rename the test to "wp-fork" to better show what it means.
Making the new test called "wp-fork-with-event".

Before:

        Testing pagemap on anon... done

After:

        Testing wp-fork on anon... done
        Testing wp-fork on shmem... done
        Testing wp-fork on shmem-private... done
        Testing wp-fork on hugetlb... done
        Testing wp-fork on hugetlb-private... done
        Testing wp-fork-with-event on anon... done
        Testing wp-fork-with-event on shmem... done
        Testing wp-fork-with-event on shmem-private... done
        Testing wp-fork-with-event on hugetlb... done
        Testing wp-fork-with-event on hugetlb-private... done

Link: https://lkml.kernel.org/r/20230417195317.898696-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add a few options for uffd-unit-test

Namely:

  "-f": add a wildcard filter for tests to run
  "-l": list tests rather than running any
  "-h": help msg

Link: https://lkml.kernel.org/r/20230417195317.898696-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: fix uffd-wp bit lost when unsharing happens

When we try to unshare a pinned page for a private hugetlb, uffd-wp bit
can get lost during unsharing.

When above condition met, one can lose uffd-wp bit on the privately mapped
hugetlb page.  It allows the page to be writable even if it should still be
wr-protected.  I assume it can mean data loss.

This should be very rare, only if an unsharing happened on a private
hugetlb page with uffd-wp protected (e.g.  in a child which shares the
same page with parent with UFFD_FEATURE_EVENT_FORK enabled).

When I wrote the reproducer (provided in the last patch) I needed to
use the newest gup_test cmd introduced by David to trigger it because I
don't even know another way to do a proper RO longerm pin.

Besides that, it needs a bunch of other conditions all met:

        (1) hugetlb being mapped privately,
        (2) userfaultfd registered with WP and EVENT_FORK,
        (3) the user app fork()s, then,
        (4) RO longterm pin onto a wr-protected anonymous page.

If it's not impossible to hit in production I'd say extremely rare.

Link: https://lkml.kernel.org/r/20230417195317.898696-3-peterx@redhat.com
Fixes: 166f3ecc0daf ("mm/hugetlb: hook page faults for uffd write protection")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb: fix uffd-wp during fork()

Patch series "mm/hugetlb: More fixes around uffd-wp vs fork() / RO pins",
v2.

This patch (of 6):

There're a bunch of things that were wrong:

  - Reading uffd-wp bit from a swap entry should use pte_swp_uffd_wp()
    rather than huge_pte_uffd_wp().

  - When copying over a pte, we should drop uffd-wp bit when
    !EVENT_FORK (aka, when !userfaultfd_wp(dst_vma)).

  - When doing early CoW for private hugetlb (e.g. when the parent page was
    pinned), uffd-wp bit should be properly carried over if necessary.

No bug reported probably because most people do not even care about these
corner cases, but they are still bugs and can be exposed by the recent unit
tests introduced, so fix all of them in one shot.

Link: https://lkml.kernel.org/r/20230417195317.898696-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230417195317.898696-2-peterx@redhat.com
Fixes: bc70fbf269fd ("mm/hugetlb: handle uffd-wp during fork()")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mika Penttilä <mpenttil@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kasan: fix lockdep report invalid wait context

For kernels built with the following options and booting

CONFIG_SLUB=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RAW_LOCK_NESTING=y

[    0.523115] [ BUG: Invalid wait context ]
[    0.523315] 6.3.0-rc1-yocto-standard+ #739 Not tainted
[    0.523649] -----------------------------
[    0.523663] swapper/0/0 is trying to lock:
[    0.523663] ffff888035611360 (&c->lock){....}-{3:3}, at: put_cpu_partial+0x2e/0x1e0
[    0.523663] other info that might help us debug this:
[    0.523663] context-{2:2}
[    0.523663] no locks held by swapper/0/0.
[    0.523663] stack backtrace:
[    0.523663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.3.0-rc1-yocto-standard+ #739
[    0.523663] Call Trace:
[    0.523663]  <IRQ>
[    0.523663]  dump_stack_lvl+0x64/0xb0
[    0.523663]  dump_stack+0x10/0x20
[    0.523663]  __lock_acquire+0x6c4/0x3c10
[    0.523663]  lock_acquire+0x188/0x460
[    0.523663]  put_cpu_partial+0x5a/0x1e0
[    0.523663]  __slab_free+0x39a/0x520
[    0.523663]  ___cache_free+0xa9/0xc0
[    0.523663]  qlist_free_all+0x7a/0x160
[    0.523663]  per_cpu_remove_cache+0x5c/0x70
[    0.523663]  __flush_smp_call_function_queue+0xfc/0x330
[    0.523663]  generic_smp_call_function_single_interrupt+0x13/0x20
[    0.523663]  __sysvec_call_function+0x86/0x2e0
[    0.523663]  sysvec_call_function+0x73/0x90
[    0.523663]  </IRQ>
[    0.523663]  <TASK>
[    0.523663]  asm_sysvec_call_function+0x1b/0x20
[    0.523663] RIP: 0010:default_idle+0x13/0x20
[    0.523663] RSP: 0000:ffffffff83e07dc0 EFLAGS: 00000246
[    0.523663] RAX: 0000000000000000 RBX: ffffffff83e1e200 RCX: ffffffff82a83293
[    0.523663] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8119a6b1
[    0.523663] RBP: ffffffff83e07dc8 R08: 0000000000000001 R09: ffffed1006ac0d66
[    0.523663] R10: ffff888035606b2b R11: ffffed1006ac0d65 R12: 0000000000000000
[    0.523663] R13: ffffffff83e1e200 R14: ffffffff84a7d980 R15: 0000000000000000
[    0.523663]  default_idle_call+0x6c/0xa0
[    0.523663]  do_idle+0x2e1/0x330
[    0.523663]  cpu_startup_entry+0x20/0x30
[    0.523663]  rest_init+0x152/0x240
[    0.523663]  arch_call_rest_init+0x13/0x40
[    0.523663]  start_kernel+0x331/0x470
[    0.523663]  x86_64_start_reservations+0x18/0x40
[    0.523663]  x86_64_start_kernel+0xbb/0x120
[    0.523663]  secondary_startup_64_no_verify+0xe0/0xeb
[    0.523663]  </TASK>

The local_lock_irqsave() is invoked in put_cpu_partial() and happens in
IPI context, due to the CONFIG_PROVE_RAW_LOCK_NESTING=y (the
LD_WAIT_CONFIG not equal to LD_WAIT_SPIN), so acquire local_lock in IPI
context will trigger above calltrace.

This commit therefore moves qlist_free_all() from hard-irq context to task
context.

Link: https://lkml.kernel.org/r/20230327120019.1027640-1-qiang1.zhang@intel.com
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: ksm: support hwpoison for ksm page

hwpoison_user_mappings() is updated to support ksm pages, and add
collect_procs_ksm() to collect processes when the error hit an ksm page.
The difference from collect_procs_anon() is that it also needs to traverse
the rmap-item list on the stable node of the ksm page.  At the same time,
add_to_kill_ksm() is added to handle ksm pages.  And
task_in_to_kill_list() is added to avoid duplicate addition of tsk to the
to_kill list.  This is because when scanning the list, if the pages that
make up the ksm page all come from the same process, they may be added
repeatedly.

Link: https://lkml.kernel.org/r/20230414021741.2597273-3-xialonglong1@huawei.com
Signed-off-by: Longlong Xia <xialonglong1@huawei.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: memory-failure: refactor add_to_kill()

Patch series "mm: ksm: support hwpoison for ksm page", v2.

Currently, ksm does not support hwpoison.  As ksm is being used more
widely for deduplication at the system level, container level, and process
level, supporting hwpoison for ksm has become increasingly important.
However, ksm pages were not processed by hwpoison in 2009 [1].

The main method of implementation:

1. Refactor add_to_kill() and add new add_to_kill_*() to better
   accommodate the handling of different types of pages.

2.  Add collect_procs_ksm() to collect processes when the error hit an
   ksm page.

3. Add task_in_to_kill_list() to avoid duplicate addition of tsk to
   the to_kill list.

4. Try_to_unmap ksm page (already supported).

5. Handle related processes such as sending SIGBUS.

Tested with poisoning to ksm page from
1) different process
2) one process

and with/without memory_failure_early_kill set, the processes are killed
as expected with the patchset.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?h=01e00f880ca700376e1845cf7a2524ebe68e47d6

This patch (of 2):

The page_address_in_vma() is used to find the user virtual address of page
in add_to_kill(), but it doesn't support ksm due to the ksm page->index
unusable, add an ksm_addr as parameter to add_to_kill(), let's the caller
to pass it, also rename the function to __add_to_kill(), and adding
add_to_kill_anon_file() for handling anonymous pages and file pages,
adding add_to_kill_fsdax() for handling fsdax pages.

Link: https://lkml.kernel.org/r/20230414021741.2597273-1-xialonglong1@huawei.com
Link: https://lkml.kernel.org/r/20230414021741.2597273-2-xialonglong1@huawei.com
Signed-off-by: Longlong Xia <xialonglong1@huawei.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/memfd: fix test_sysctl

sysctl memfd_noexec is pid-namespaced, non-reservable, and inherent to the
child process.

Move the inherence test from init ns to child ns, so init ns can keep the
default value.

Link: https://lkml.kernel.org/r/20230414022801.2545257-1-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@google.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303312259.441e35db-yujie.liu@intel.com
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: run hugetlb testcases of va switch

The va_high_addr_switch selftest is used to test mmap across 128TB
boundary.  It divides the selftest cases into two main categories on the
basis of size.  One set is used to create mappings that are multiples of
PAGE_SIZE while the other creates mappings that are multiples of
HUGETLB_SIZE.

In order to run the hugetlb testcases the binary must be appended with
"--run-hugetlb" but the file that used to run the test only invokes the
binary, thereby completely skipping the hugetlb testcases.  Hence, the
required statement has been added.

Link: https://lkml.kernel.org/r/20230323105243.2807166-6-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: configure nr_hugepages for arm64

Arm64 has a default hugepage size of 512MB when CONFIG_ARM64_64K_PAGES=y
is enabled.  While testing on arm64 platforms having up to 4PB of virtual
address space, a minimum of 6 hugepages were required for all test cases
to pass.  Support for this requirement has been added.

Link: https://lkml.kernel.org/r/20230323105243.2807166-5-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add platform independent in code comments

The in code comments for the selftest were made on the basis of 128TB
switch, an architecture feature specific to PowerPc and x86 platforms.
Keeping in mind the support added for arm64 platforms which implements a
256TB switch, a more generic explanation has been provided.

Link: https://lkml.kernel.org/r/20230323105243.2807166-4-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: rename va_128TBswitch to va_high_addr_switch

As the initial selftest only took into consideration PowperPC and x86
architectures, on adding support for arm64, a platform independent naming
convention is chosen.

Link: https://lkml.kernel.org/r/20230323105243.2807166-3-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add support for arm64 platform on va switch

Patch series "selftests/mm: Implement support for arm64 on va".

The va_128TBswitch selftest is designed and implemented for PowerPC and
x86 architectures which support a 128TB switch, up to 256TB of virtual
address space and hugepage sizes of 16MB and 2MB respectively.  Arm64
platforms on the other hand support a 256Tb switch, up to 4PB of virtual
address space and a default hugepage size of 512MB when 64k pagesize is
enabled.

These architectural differences require introducing support for arm64
platforms, after which a more generic naming convention is suggested.  The
in code comments are amended to provide a more platform independent
explanation of the working of the code and nr_hugepages are configured as
required.  Finally, the file running the testcase is modified in order to
prevent skipping of hugetlb testcases of va_high_addr_switch.

This patch (of 5):

Arm64 platforms have the ability to support 64kb pagesize, 512MB default
hugepage size and up to 4PB of virtual address space.  The address switch
occurs at 256TB as opposed to 128TB.  Hence, the necessary support has
been added.

Link: https://lkml.kernel.org/r/20230323105243.2807166-1-chaitanyas.prakash@arm.com
Link: https://lkml.kernel.org/r/20230323105243.2807166-2-chaitanyas.prakash@arm.com
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memfd: pass argument of memfd_fcntl as int

The interface for fcntl expects the argument passed for the command
F_ADD_SEALS to be of type int.  The current code wrongly treats it as a
long.  In order to avoid access to undefined bits, we should explicitly
cast the argument to int.

This commit changes the signature of all the related and helper functions
so that they treat the argument as int instead of long.

Link: https://lkml.kernel.org/r/20230414152459.816046-5-Luca.Vizzarro@arm.com
Signed-off-by: Luca Vizzarro <Luca.Vizzarro@arm.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: David Laight <David.Laight@ACULAB.com>
Cc: Mark Rutland <Mark.Rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: Multi-gen LRU: remove wait_event_killable()

Android 14 and later default to MGLRU [1] and field telemetry showed
occasional long tail latency (>100ms) in the reclaim path.

Tracing revealed priority inversion in the reclaim path.  In
try_to_inc_max_seq(), when high priority tasks were blocked on
wait_event_killable(), the preemption of the low priority task to call
wake_up_all() caused those high priority tasks to wait longer than
necessary.  In general, this problem is not different from others of its
kind, e.g., one caused by mutex_lock().  However, it is specific to MGLRU
because it introduced the new wait queue lruvec->mm_state.wait.

The purpose of this new wait queue is to avoid the thundering herd
problem.  If many direct reclaimers rush into try_to_inc_max_seq(), only
one can succeed, i.e., the one to wake up the rest, and the rest who
failed might cause premature OOM kills if they do not wait.  So far there
is no evidence supporting this scenario, based on how often the wait has
been hit.  And this begs the question how useful the wait queue is in
practice.

Based on Minchan's recommendation, which is in line with his commit
6d4675e60135 ("mm: don't be stuck to rmap lock on reclaim path") and the
rest of the MGLRU code which also uses trylock when possible, remove the
wait queue.

[1] https://android-review.googlesource.com/q/I7ed7fbfd6ef9ce10053347528125dd98c39e50bf

Link: https://lkml.kernel.org/r/20230413214326.2147568-1-kaleshsingh@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Reported-by: Wei Wang <wvw@google.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: workingset: update description of the source file

The calculation of workingset size is the core logic of handling refault,
it had been updated several times[1][2] after workingset.c was created[3].
But the description hadn't been updated accordingly, this mismatch may
confuse the readers.  So we update the description to make it consistent
to the code.

[1] commit 34e58cac6d8f ("mm: workingset: let cache workingset challenge anon")
[2] commit aae466b0052e ("mm/swap: implement workingset detection for anonymous LRU")
[3] commit a528910e12ec ("mm: thrash detection-based file cache sizing")

Link: https://lkml.kernel.org/r/202304131634494948454@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

printk: export console trace point for kcsan/kasan/kfence/kmsan

The console tracepoint is used by kcsan/kasan/kfence/kmsan test modules.
Since this tracepoint is not exported, these modules iterate over all
available tracepoints to find the console trace point.  Export the trace
point so that it can be directly used.

Link: https://lkml.kernel.org/r/20230413100859.1492323-1-quic_pkondeti@quicinc.com
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Marco Elver <elver@google.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmscan: refactor updating current->reclaim_state

During reclaim, we keep track of pages reclaimed from other means than
LRU-based reclaim through scan_control->reclaim_state->reclaimed_slab,
which we stash a pointer to in current task_struct.

However, we keep track of more than just reclaimed slab pages through
this.  We also use it for clean file pages dropped through pruned inodes,
and xfs buffer pages freed.  Rename reclaimed_slab to reclaimed, and add a
helper function that wraps updating it through current, so that future
changes to this logic are contained within include/linux/swap.h.

Link: https://lkml.kernel.org/r/20230413104034.1086717-4-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmscan: move set_task_reclaim_state() near flush_reclaim_state()

Move set_task_reclaim_state() near flush_reclaim_state() so that all
helpers manipulating reclaim_state are in close proximity.

Link: https://lkml.kernel.org/r/20230413104034.1086717-3-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: vmscan: ignore non-LRU-based reclaim in memcg reclaim

Patch series "Ignore non-LRU-based reclaim in memcg reclaim", v6.

Upon running some proactive reclaim tests using memory.reclaim, we noticed
some tests flaking where writing to memory.reclaim would be successful
even though we did not reclaim the requested amount fully Looking further
into it, I discovered that *sometimes* we overestimate the number of
reclaimed pages in memcg reclaim.

Reclaimed pages through other means than LRU-based reclaim are tracked
through reclaim_state in struct scan_control, which is stashed in current
task_struct.  These pages are added to the number of reclaimed pages
through LRUs.  For memcg reclaim, these pages generally cannot be linked
to the memcg under reclaim and can cause an overestimated count of
reclaimed pages.  This short series tries to address that.

Patch 1 ignores pages reclaimed outside of LRU reclaim in memcg reclaim.
The pages are uncharged anyway, so even if we end up under-reporting
reclaimed pages we will still succeed in making progress during charging.

Patches 2-3 are just refactoring.  Patch 2 moves set_reclaim_state()
helper next to flush_reclaim_state().  Patch 3 adds a helper that wraps
updating current->reclaim_state, and renames reclaim_state->reclaimed_slab
to reclaim_state->reclaimed.

This patch (of 3):

We keep track of different types of reclaimed pages through
reclaim_state->reclaimed_slab, and we add them to the reported number of
reclaimed pages.  For non-memcg reclaim, this makes sense.  For memcg
reclaim, we have no clue if those pages are charged to the memcg under
reclaim.

Slab pages are shared by different memcgs, so a freed slab page may have
only been partially charged to the memcg under reclaim.  The same goes for
clean file pages from pruned inodes (on highmem systems) or xfs buffer
pages, there is no simple way to currently link them to the memcg under
reclaim.

Stop reporting those freed pages as reclaimed pages during memcg reclaim.
This should make the return value of writing to memory.reclaim, and may
help reduce unnecessary reclaim retries during memcg charging.  Writing to
memory.reclaim on the root memcg is considered as cgroup_reclaim(), but
for this case we want to include any freed pages, so use the
global_reclaim() check instead of !cgroup_reclaim().

Generally, this should make the return value of
try_to_free_mem_cgroup_pages() more accurate.  In some limited cases (e.g.
freed a slab page that was mostly charged to the memcg under reclaim),
the return value of try_to_free_mem_cgroup_pages() can be underestimated,
but this should be fine.  The freed pages will be uncharged anyway, and we
can charge the memcg the next time around as we usually do memcg reclaim
in a retry loop.

Link: https://lkml.kernel.org/r/20230413104034.1086717-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230413104034.1086717-2-yosryahmed@google.com
Fixes: f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects
instead of pages")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: apply __must_check to vmap_pages_range_noflush()

To prevent errors when vmap_pages_range_noflush() or
__vmap_pages_range_noflush() silently fail (see the link below for an
example), annotate them with __must_check so that the callers do not
unconditionally assume the mapping succeeded.

Link: https://lkml.kernel.org/r/20230413131223.4135168-4-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Link: https://lore.kernel.org/linux-mm/CANX2M5ZRrRA64k0hOif02TjmY9kbbO2aCBPyq79es34RXZ=cAw@mail.gmail.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: kmsan: apply __must_check to non-void functions

Non-void KMSAN hooks may return error codes that indicate that KMSAN
failed to reflect the changed memory state in the metadata (e.g.  it could
not create the necessary memory mappings).  In such cases the callers
should handle the errors to prevent the tool from using the inconsistent
metadata in the future.

We mark non-void hooks with __must_check so that error handling is not
skipped.

Link: https://lkml.kernel.org/r/20230413131223.4135168-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dipanjan Das <mail.dipanjan.das@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm: hwpoison: support recovery from HugePage copy-on-write faults

copy-on-write of hugetlb user pages with uncorrectable errors will result
in a kernel crash.  This is because the copy is performed in kernel mode
and in general we can not handle accessing memory with such errors while
in kernel mode.  Commit a873dfe1032a ("mm, hwpoison: try to recover from
copy-on write faults") introduced the routine copy_user_highpage_mc() to
gracefully handle copying of user pages with uncorrectable errors.
However, the separate hugetlb copy-on-write code paths were not modified
as part of commit a873dfe1032a.

Modify hugetlb copy-on-write code paths to use copy_mc_user_highpage() so
that they can also gracefully handle uncorrectable errors in user pages.
This involves changing the hugetlb specific routine
copy_user_large_folio() from type void to int so that it can return an
error.  Modify the hugetlb userfaultfd code in the same way so that it can
return -EHWPOISON if it encounters an uncorrectable error.

Link: https://lkml.kernel.org/r/20230413131349.2524210-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memcg: page_cgroup_ino() get memcg from the page's folio

In a kernel with added WARN_ON_ONCE(PageTail) in page_memcg_check(), we
observed a warning from page_cgroup_ino() when reading /proc/kpagecgroup.
This warning was added to catch fragile reads of a page memcg.  Make
page_cgroup_ino() get memcg from the page's folio using
folio_memcg_check(): that gives it the correct memcg for each page of a
folio, so is the right fix.

Note that page_folio() is racy, the page's folio can change from under us,
but the entire function is racy and documented as such.

I dithered between the right fix and the safer "fix": it's unlikely but
conceivable that some userspace has learnt that /proc/kpagecgroup gives no
memcg on tail pages, and compensates for that in some (racy) way: so
continuing to give no memcg on tails, without warning, might be safer.

But hwpoison_filter_task(), the only other user of page_cgroup_ino(),
persuaded me.  It looks as if it currently leaves out tail pages of the
selected memcg, by mistake: whereas hwpoison_inject() uses compound_head()
and expects the tails to be included.  So hwpoison testing coverage has
probably been restricted by the wrong output from page_cgroup_ino() (if
that memcg filter is used at all): in the short term, it might be safer
not to enable wider coverage there, but long term we would regret that.

This is based on a patch originally written by Hugh Dickins and retains
most of the original commit log [1]

The patch was changed to use folio_memcg_check(page_folio(page)) instead
of page_memcg_check(compound_head(page)) based on discussions with Matthew
Wilcox; where he stated that callers of page_memcg_check() should stop
using it due to the ambiguity around tail pages -- instead they should use
folio_memcg_check() and handle tail pages themselves.

Link: https://lkml.kernel.org/r/20230412003451.4018887-1-yosryahmed@google.com
Link: https://lore.kernel.org/linux-mm/20230313083452.1319968-1-yosryahmed@google.com/
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/hugetlb_vmemmap: rename ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP

Now we use ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP config option to
indicate devdax and hugetlb vmemmap optimization support.  Hence rename
that to a generic ARCH_WANT_OPTIMIZE_VMEMMAP

Link: https://lkml.kernel.org/r/20230412050025.84346-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Tarun Sahu <tsahu@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmemmap/devdax: fix kernel crash when probing devdax devices

commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices.  But how vmemmap mappings are created are architecture specific.
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table

vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping.  Hence allow architecture to
opt for this feature.  I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.

This patch fixes the below crash on ppc64.

BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP:  c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300   Not tainted  (6.3.0-rc5-150500.34-default+)
MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24842228  XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64

Link: https://lkml.kernel.org/r/20230411142214.64464-1-aneesh.kumar@linux.ibm.com
Fixes: 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for compound devmaps")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Tarun Sahu <tsahu@linux.ibm.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add uffdio register ioctls test

This new test tests against the returned ioctls from UFFDIO_REGISTER,
where put into uffdio_register.ioctls.

This also tests the expected failure cases of UFFDIO_REGISTER, aka:

  - Register with empty mode should fail with -EINVAL
  - Register minor without page cache (anon) should fail with -EINVAL

Link: https://lkml.kernel.org/r/20230412164548.329376-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add shmem-private test to uffd-stress

The userfaultfd stress test never tested private shmem, which I think was
overlooked long due.  Add it so it matches with uffd unit test and it'll
cover all memory supported with the three memory types.

Meanwhile, rename the memory types a bit.  Considering shared mem is the
major use case for both shmem / hugetlbfs, changing from:

  anon, hugetlb, hugetlb_shared, shmem

To (with shmem-private added):

  anon, hugetlb, hugetlb-private, shmem, shmem-private

Add the shmem-private to run_vmtests.sh too.

Link: https://lkml.kernel.org/r/20230412164546.329355-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: drop sys/dev test in uffd-stress test

With the new uffd unit test covering the /dev/userfaultfd path and syscall
path of uffd initializations, we can safely drop the devnode test in the
old stress test.

One thing is to avoid duplication of running the stress test twice which is
an overkill to only test the /dev/ interface in run_vmtests.sh.

The other benefit is now all uffd tests (that uses userfaultfd_open) can
run automatically as long as any type of interface is enabled (either
syscall or dev), so it's more likely to succeed rather than fail due to
unprivilege.

With this patch lands, we can drop all the "mem_type:XXX" handlings too.

Link: https://lkml.kernel.org/r/20230412164525.329176-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: allow uffd test to skip properly with no privilege

Allow skip a unit test properly due to no privilege (e.g.  sigbus and
events tests).

[colin.i.king@gmail.com: fix spelling mistake "priviledge" -> "privilege"]
Link: https://lkml.kernel.org/r/20230414081506.1678998-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/20230412164520.329163-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: workaround no way to detect uffd-minor + wp

Userfaultfd minor+wp mode was very recently added.  The test will fail on
the old kernels at ioctl(UFFDIO_CONTINUE) which is misterious.
Unfortunately there's no feature bit to detect for this support.

Add a hack to leverage WP_UNPOPULATED to detect whether that feature
existed, since WP_UNPOPULATED was merged right after minor+wp.

Link: https://lkml.kernel.org/r/20230412164517.329152-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: move zeropage test into uffd unit tests

Simplifies it a bit along the way, e.g., drop the never used offset field
(which was always the 1st page so offset=0).

Introduce uffd_register_with_ioctls() out of uffd_register() to detect
uffdio_register.ioctls got returned.  Check that automatically when testing
UFFDIO_ZEROPAGE on different types of memory (and kernel).

Link: https://lkml.kernel.org/r/20230412164404.328815-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: move uffd sig/events tests into uffd unit tests

Move the two tests into the unit test, and convert it into 20 standalone
tests:

  - events test on all 5 mem types, with wp on/off
  - signal test on all 5 mem types, with wp on/off

  Testing sigbus on anon... done
  Testing sigbus on shmem... done
  Testing sigbus on shmem-private... done
  Testing sigbus on hugetlb... done
  Testing sigbus on hugetlb-private... done
  Testing sigbus-wp on anon... done
  Testing sigbus-wp on shmem... done
  Testing sigbus-wp on shmem-private... done
  Testing sigbus-wp on hugetlb... done
  Testing sigbus-wp on hugetlb-private... done
  Testing events on anon... done
  Testing events on shmem... done
  Testing events on shmem-private... done
  Testing events on hugetlb... done
  Testing events on hugetlb-private... done
  Testing events-wp on anon... done
  Testing events-wp on shmem... done
  Testing events-wp on shmem-private... done
  Testing events-wp on hugetlb... done
  Testing events-wp on hugetlb-private... done

It'll also remove a lot of global references along the way,
e.g. test_uffdio_wp will be replaced with the wp value passed over.

Link: https://lkml.kernel.org/r/20230412164400.328798-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: move uffd minor test to unit test

This moves the minor test to the new unit test.

Rewrite the content check with char* opeartions to avoid fiddling with
my_bcmp().

Drop global vars test_uffdio_minor and test_collapse, just assume test them
always in common code for now.

OTOH make this single test into five tests:

  - minor test on [shmem, hugetlb] with wp=false
  - minor test on [shmem, hugetlb] with wp=true
  - minor test + collapse on shmem only

One thing to mention that we used to test COLLAPSE+WP but that doesn't
sound right at all.  It's possible it's silently broken but unnoticed
because COLLAPSE is not part of the default test suite.

Make the MADV_COLLAPSE test fail-able (by skip it when failing), because
it's not guaranteed to success anyway.

Drop a bunch of useless code after the move, because the unit test always
use aligned num of pages and has nothing to do with n_cpus.

Link: https://lkml.kernel.org/r/20230412164357.328779-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: move uffd pagemap test to unit test

Move it over and make it split into two tests, one for pagemap and one for
the new WP_UNPOPULATED (to be a separate one).

The thp pagemap test wasn't really working (with MADV_HUGEPAGE).  Let's
just drop it (since it never really worked anyway..) and leave that for
later.

Link: https://lkml.kernel.org/r/20230412164352.328733-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: add framework for uffd-unit-test

Add a framework to be prepared to move unit tests from uffd-stress.c into
uffd-unit-tests.c.  The goal is to allow detection of uffd features for
each test, and also loop over specified types of memory that a test
support.

Link: https://lkml.kernel.org/r/20230412164348.328710-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: allow allocate_area() to fail properly

Mostly to detect hugetlb allocation errors and skip hugetlb tests when
pages are not allocated.

Link: https://lkml.kernel.org/r/20230412164345.328659-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: let uffd_handle_page_fault() take wp parameter

Make the handler optionally apply WP bit when resolving page faults for
either missing or minor page faults.  This moves towards removing global
test_uffdio_wp outside of the common code.

Link: https://lkml.kernel.org/r/20230412164341.328618-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: rename uffd_stats to uffd_args

Prepare for adding more fields into the struct.

Link: https://lkml.kernel.org/r/20230412164337.328607-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: drop global hpage_size in uffd tests

hpage_size was wrongly used.  Sometimes it means hugetlb default size,
sometimes it was used as thp size.

Remove the global variable and use the right one at each place.

Link: https://lkml.kernel.org/r/20230412164333.328596-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: drop global mem_fd in uffd tests

Drop it by creating the memfd dynamically in the tests.

Link: https://lkml.kernel.org/r/20230412164331.328584-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: UFFDIO_API test

Add one simple test for UFFDIO_API.  With that, I also added a bunch of
small but handy helpers along the way.

Link: https://lkml.kernel.org/r/20230412164257.328375-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: uffd_open_{dev|sys}()

Provide two helpers to open an uffd handle.  Drop the error checks around
SKIPs because it's inside an errexit() anyway, which IMHO doesn't really
help much if the test will not continue.

Link: https://lkml.kernel.org/r/20230412164254.328335-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: uffd_[un]register()

Add two helpers to register/unregister to an uffd.  Use them to drop
duplicate codes.

This patch also drops assert_expected_ioctls_present() and
get_expected_ioctls().  Reasons:

  - It'll need a lot of effort to pass test_type==HUGETLB into it from
    the upper, so it's the simplest way to get rid of another global var

  - The ioctls returned in UFFDIO_REGISTER is hardly useful at all,
    because any app can already detect kernel support on any ioctl via its
    corresponding UFFD_FEATURE_*.  The check here is for sanity mostly but
    it's probably destined no user app will even use it.

  - It's not friendly to one future goal of uffd to run on old
    kernels, the problem is get_expected_ioctls() compiles against
    UFFD_API_RANGE_IOCTLS, which is a value that can change depending on
    where the test is compiled, rather than reflecting what the kernel
    underneath has.  It means it'll report false negatives on old kernels
    so it's against our will.

So let's make our lives easier.

[peterx@redhat.com; tools/testing/selftests/mm/hugepage-mremap.c: add headers]
Link: https://lkml.kernel.org/r/ZDxrvZh/cw357D8P@x1n
Link: https://lkml.kernel.org/r/20230412164247.328293-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: split uffd tests into uffd-stress and uffd-unit-tests

In many ways it's weird and unwanted to keep all the tests in the same
userfaultfd.c at least when still in the current way.

For example, it doesn't make much sense to run the stress test for each
method we can create an userfaultfd handle (either via syscall or /dev/
node).  It's a waste of time running this twice for the whole stress as
the stress paths are the same, only the open path is different.

It's also just weird to need to manually specify different types of memory
to run all unit tests for the userfaultfd interface.  We should be able to
just run a single program and that should go through all functional uffd
tests without running the stress test at all.  The stress test was more
for torturing and finding race conditions.  We don't want to wait for
stress to finish just to regress test a functional test.

When we start to pile up more things on top of the same file and same
functions, things start to go a bit chaos and the code is just harder to
maintain too with tons of global variables.

This patch creates a new test uffd-unit-tests to keep userfaultfd unit
tests in the future, currently empty.

Meanwhile rename the old userfaultfd.c test to uffd-stress.c.

Link: https://lkml.kernel.org/r/20230412164244.328270-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: create uffd-common.[ch]

Move common utility functions into uffd-common.[ch] files from the
original userfaultfd.c.  This prepares for a split of userfaultfd.c into
two tests: one to only cover the old but powerful stress test, the other
one covers all the functional tests.

This movement is kind of a brute-force effort for now, with light
touch-ups but nothing should really change.  There's chances to optimize
more, but let's leave that for later.

Link: https://lkml.kernel.org/r/20230412164241.328259-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: drop test_uffdio_zeropage_eexist

The idea was trying to flip this var in the alarm handler from time to
time to test -EEXIST of UFFDIO_ZEROPAGE, but firstly it's only used in the
zeropage test so probably only used once, meanwhile we passed
"retry==false" so it'll never got tested anyway.

Drop both sides so we always test UFFDIO_ZEROPAGE retries if has_zeropage
is set (!hugetlb).

One more thing to do is doing UFFDIO_REGISTER for the alias buffer too,
because otherwise the test won't even pass!  We were just lucky that this
test never really got ran at all.

Link: https://lkml.kernel.org/r/20230412164238.328238-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: test UFFDIO_ZEROPAGE only when !hugetlb

Make the check as simple as "test_type == TEST_HUGETLB" because that's the
only mem that doesn't support ZEROPAGE.

Link: https://lkml.kernel.org/r/20230412164234.328168-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: reuse pagemap_get_entry() in vm_util.h

Meanwhile drop pagemap_read_vaddr().

Link: https://lkml.kernel.org/r/20230412164231.328157-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: use PM_* macros in vm_utils.h

We've got the macros in uffd-stress.c, move it over and use it in
vm_util.h.

Link: https://lkml.kernel.org/r/20230412164227.328145-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: merge default_huge_page_size() into one

There're already 3 same definitions of the three functions.  Move it into
vm_util.[ch].

Link: https://lkml.kernel.org/r/20230412164223.328134-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: link vm_util.c always

We do have plenty of files that want to link against vm_util.c.  Just make
it simple by linking it always.

Link: https://lkml.kernel.org/r/20230412164220.328123-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: use TEST_GEN_PROGS where proper

TEST_GEN_PROGS and TEST_GEN_FILES are used randomly in the mm/Makefile to
specify programs that need to build.  Logically all these binaries should
all fall into TEST_GEN_PROGS.

Replace those TEST_GEN_FILES with TEST_GEN_PROGS, so that we can reference
all the tests easily later.

[peterx@redhat.com: tools/testing/selftests/mm/Makefile: don't wipe out TEST_GEN_PROGS]
Link: https://lkml.kernel.org/r/ZDxrvZh/cw357D8P@x1n
Link: https://lkml.kernel.org/r/20230412164218.328104-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: merge util.h into vm_util.h

There're two util headers under mm/ kselftest.  Merge one with another.
It turns out util.h is the easy one to move.

When merging, drop PAGE_SIZE / PAGE_SHIFT because they're unnecessary
wrappers to page_size() / page_shift(), meanwhile rename them to psize()
and pshift() so as to not conflict with some existing definitions in some
test files that includes vm_util.h.

Link: https://lkml.kernel.org/r/20230412164120.327731-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: dump a summary in run_vmtests.sh

Dump a summary after running whatever test specified.  Useful for human
runners to identify any kind of failures (besides exit code).

Link: https://lkml.kernel.org/r/20230412164117.327720-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: update .gitignore with two missing tests

Patch series "selftests/mm: Split / Refactor userfault test", v2.

This patchset splits userfaultfd.c into two tests:

  - uffd-stress: the "vanilla", old and powerful stress test
  - uffd-unit-tests: all the unit tests will be moved here

This is on my todo list for a long time but I never did it for real.  The
uffd test is growing into a small and cute monster.  I start to notice it's
going harder to maintain such a test and make it useful.

A few issues I found when looking at userfaultfd test:

  - We have a bunch of unit tests in userfaultfd.c, but they always need to
    be run only after a stress type.  No way to not do it.

  - We can only run an unit test for one memory type only, if we want to
    do a quick smoke test to check regressions, there's no good way.  The
    best to come currently is "bash ./run_vmtests.sh -t userfaultfd" thanks
    to the most recent changes to run_vmtests.sh on tagging.  Still, that
    needs to run the stress tests always and hard to see what's wrong.

  - It's hard to add a new unit test to userfaultfd.c, we don't really know
    what's happening, not until we mostly read the whole file.

  - We did a bunch of useless tests, e.g. we run twice the whole suite of
    stress test just to verify both syscall and /dev/userfaultfd.  They're
    all using userfaultfd_new() to create the handle, everything should
    really be the same underneath.  One simple unit test should cover that!

  - We have tens of global variables in one file but shared with all the
    tests.  Some of them are not suitable to be a global var from
    maintainance pov.  It enforces every unit test to consider how these
    vars affects the stress test and vice versa, but that's logically not
    necessary.

  - Userfaultfd test is not friendly to old kernels.  Mostly it only works
    on the latest kernel tree.  It's preferrable to be run on all kernels
    and properly report what's missing.

I'll stop here, I feel like I can still list some..

This patchset should resolve all issues above, and actually we can do even
more on top.  I stopped doing that until I found I already got 29 patches
and 2000+ LOC changes.  That's already a patchset terrible enough so we
should move in small steps.

After the whole set applied, "./run_vmtests.sh -t userfaultfd" looks like
this:

===8<===
vm.nr_hugepages = 1024
-------------------------
running ./uffd-unit-tests
-------------------------
Testing UFFDIO_API (with syscall)... done
Testing UFFDIO_API (with /dev/userfaultfd)... done
Testing register-ioctls on anon... done
Testing register-ioctls on shmem... done
Testing register-ioctls on shmem-private... done
Testing register-ioctls on hugetlb... done
Testing register-ioctls on hugetlb-private... done
Testing zeropage on anon... done
Testing zeropage on shmem... done
Testing zeropage on shmem-private... done
Testing zeropage on hugetlb... done
Testing zeropage on hugetlb-private... done
Testing pagemap on anon... done
Testing wp-unpopulated on anon... done
Testing minor on shmem... done
Testing minor on hugetlb... done
Testing minor-wp on shmem... done
Testing minor-wp on hugetlb... done
Testing minor-collapse on shmem... done
Testing sigbus on anon... done
Testing sigbus on shmem... done
Testing sigbus on shmem-private... done
Testing sigbus on hugetlb... done
Testing sigbus on hugetlb-private... done
Testing sigbus-wp on anon... done
Testing sigbus-wp on shmem... done
Testing sigbus-wp on shmem-private... done
Testing sigbus-wp on hugetlb... done
Testing sigbus-wp on hugetlb-private... done
Testing events on anon... done
Testing events on shmem... done
Testing events on shmem-private... done
Testing events on hugetlb... done
Testing events on hugetlb-private... done
Testing events-wp on anon... done
Testing events-wp on shmem... done
Testing events-wp on shmem-private... done
Testing events-wp on hugetlb... done
Testing events-wp on hugetlb-private... done
Userfaults unit tests: pass=39, skip=0, fail=0 (total=39)
[PASS]
--------------------------------
running ./uffd-stress anon 20 16
--------------------------------
nr_pages: 5120, nr_pages_per_cpu: 640
bounces: 15, mode: rnd racing ver poll, userfaults: 345 missing (26+48+61+102+30+12+59+7) 1596 wp (120+139+317+346+215+67+306+86)
[...]
[PASS]
------------------------------------
running ./uffd-stress hugetlb 128 32
------------------------------------
nr_pages: 64, nr_pages_per_cpu: 8
bounces: 31, mode: rnd racing ver poll, userfaults: 29 missing (6+6+6+5+4+2+0+0) 104 wp (20+19+22+18+7+12+5+1)
[...]
[PASS]
--------------------------------------------
running ./uffd-stress hugetlb-private 128 32
--------------------------------------------
nr_pages: 64, nr_pages_per_cpu: 8
bounces: 31, mode: rnd racing ver poll, userfaults: 33 missing (12+9+7+0+5+0+0+0) 111 wp (24+25+14+14+11+17+5+1)
[...]
[PASS]
---------------------------------
running ./uffd-stress shmem 20 16
---------------------------------
nr_pages: 5120, nr_pages_per_cpu: 640
bounces: 15, mode: rnd racing ver poll, userfaults: 247 missing (15+17+34+60+81+37+3+0) 2038 wp (180+114+276+400+381+318+165+204)
[...]
[PASS]
-----------------------------------------
running ./uffd-stress shmem-private 20 16
-----------------------------------------
nr_pages: 5120, nr_pages_per_cpu: 640
bounces: 15, mode: rnd racing ver poll, userfaults: 235 missing (52+29+55+56+13+9+16+5) 2849 wp (218+406+461+531+328+284+430+191)
[...]
[PASS]
SUMMARY: PASS=6 SKIP=0 FAIL=0
===8<===

The output may be different if we miss some features (e.g., hugetlb not
allocated, old kernel, less privilege of uffd handle), but they should show
up with good reasons.  E.g., I tried to run the unit test on my Fedora
kernel and it gives me:

===8<===
UFFDIO_API (with syscall)... failed [reason: UFFDIO_API should fail with wrong api but didn't]
UFFDIO_API (with /dev/userfaultfd)... skipped [reason: cannot open userfaultfd handle]
zeropage on anon... done
zeropage on shmem... done
zeropage on shmem-private... done
zeropage-hugetlb on hugetlb... done
zeropage-hugetlb on hugetlb-private... done
pagemap on anon... pagemap on anon... pagemap on anon... done
wp-unpopulated on anon... skipped [reason: feature missing]
minor on shmem... done
minor on hugetlb... done
minor-wp on shmem... skipped [reason: feature missing]
minor-wp on hugetlb... skipped [reason: feature missing]
minor-collapse on shmem... done
sigbus on anon... skipped [reason: possible lack of priviledge]
sigbus on shmem... skipped [reason: possible lack of priviledge]
sigbus on shmem-private... skipped [reason: possible lack of priviledge]
sigbus on hugetlb... skipped [reason: possible lack of priviledge]
sigbus on hugetlb-private... skipped [reason: possible lack of priviledge]
sigbus-wp on anon... skipped [reason: possible lack of priviledge]
sigbus-wp on shmem... skipped [reason: possible lack of priviledge]
sigbus-wp on shmem-private... skipped [reason: possible lack of priviledge]
sigbus-wp on hugetlb... skipped [reason: possible lack of priviledge]
sigbus-wp on hugetlb-private... skipped [reason: possible lack of priviledge]
events on anon... skipped [reason: possible lack of priviledge]
events on shmem... skipped [reason: possible lack of priviledge]
events on shmem-private... skipped [reason: possible lack of priviledge]
events on hugetlb... skipped [reason: possible lack of priviledge]
events on hugetlb-private... skipped [reason: possible lack of priviledge]
events-wp on anon... skipped [reason: possible lack of priviledge]
events-wp on shmem... skipped [reason: possible lack of priviledge]
events-wp on shmem-private... skipped [reason: possible lack of priviledge]
events-wp on hugetlb... skipped [reason: possible lack of priviledge]
events-wp on hugetlb-private... skipped [reason: possible lack of priviledge]
Userfaults unit tests: pass=9, skip=24, fail=1 (total=34)
===8<===

Patch layout:

- Revert "userfaultfd: don't fail on unrecognized features"

  Something I found when I got the UFFDIO_API test below.  Axel, I still
  propose to revert it as a whole, but feel free to continue the discussion
  from the original patch thread.

- selftests/mm: Update .gitignore with two missing tests
- selftests/mm: Dump a summary in run_vmtests.sh
- selftests/mm: Merge util.h into vm_util.h
- selftests/mm: Use TEST_GEN_PROGS where proper
- selftests/mm: Link vm_util.c always
- selftests/mm: Merge default_huge_page_size() into one
- selftests/mm: Use PM_* macros in vm_utils.h
- selftests/mm: Reuse pagemap_get_entry() in vm_util.h
- selftests/mm: Test UFFDIO_ZEROPAGE only when !hugetlb
- selftests/mm: Drop test_uffdio_zeropage_eexist

  Until here, all cleanups here and there.  I wanted to keep going, but I
  found that maybe it'll take a few more days to split the test.  Hence I
  did a split starting from the next one, so we have a working thing first.

- selftests/mm: Create uffd-common.[ch]
- selftests/mm: Split uffd tests into uffd-stress and uffd-unit-tests

  This did the major brute force split of common codes into
  uffd-common.[ch].  That'll be the so far common base for stress and unit
  tests.  Then a new unit test is created.

- selftests/mm: uffd_[un]register()
- selftests/mm: uffd_open_{dev|sys}()
- selftests/mm: UFFDIO_API test

  This patch hides here to start writting the 1st unit test with
  UFFDIO_API, also detection of userfaultfd privileges.

- selftests/mm: Drop global mem_fd in uffd tests
- selftests/mm: Drop global hpage_size in uffd tests
- selftests/mm: Rename uffd_stats to uffd_args
- selftests/mm: Let uffd_handle_page_fault() takes wp parameter
- selftests/mm: Allow allocate_area() to fail properly

  Some further cleanup that I noticed otherwise hard to move the tests.

- selftests/mm: Add framework for uffd-unit-test

  The major patch provides the framework for most of the rest unit tests.

- selftests/mm: Move uffd pagemap test to unit test
- selftests/mm: Move uffd minor test to unit test
- selftests/mm: Move uffd sig/events tests into uffd unit tests
- selftests/mm: Move zeropage test into uffd unit tests

  Move unit tests and suite them into the new file.

- selftests/mm: Workaround no way to detect uffd-minor + wp
- selftests/mm: Allow uffd test to skip properly with no privilege
- selftests/mm: Drop sys/dev test in uffd-stress test
- selftests/mm: Add shmem-private test to uffd-stress

  A bunch of changes to do better on error reportings, and add
  shmem-private to the stress test which was long missing.

- selftests/mm: Add uffdio register ioctls test

  One more patch to test uffdio_register.ioctls.

This patch (of 30):

Update .gitignore with two missing tests.

Link: https://lkml.kernel.org/r/20230412163922.327282-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230412164114.327709-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/vmscan: simplify shrink_node()

The difference between sc->nr_reclaimed and nr_reclaimed is computed three
times.  Introduce a new variable to record the value, so it only needs to
be computed once.

Link: https://lkml.kernel.org/r/20230411061757.12041-1-haifeng.xu@shopee.com
Signed-off-by: Haifeng Xu <haifeng.xu@shopee.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mpage: use folios in bio end_io handler

Use folios in the bio end_io handler.  This conversion does the
appropriate handling on the folios in the respective end_io callback and
removes the call to page_endio(), which is soon to be removed.

Link: https://lkml.kernel.org/r/20230411122920.30134-4-p.raghav@samsung.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mpage: split submit_bio and bio end_io handler for reads and writes

Split the submit_bio() and bio end_io handler for reads and writes similar
to other aops.

This is a prep patch before we convert end_io handlers to use folios.

Link: https://lkml.kernel.org/r/20230411122920.30134-3-p.raghav@samsung.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

orangefs: use folios in orangefs_readahead

Patch series "remove page_endio()", v3.

It was decided to remove the page_endio() as per the previous RFC
discussion[1] of this series and move that functionality into the caller
itself.  One of the side benefit of doing that is the callers have been
modified to directly work on folios as page_endio() already worked on
folios.

As Christoph is doing ZRAM cleanups[4] which will get rid of page_endio()
function usage, I removed the final patch that removes page_endio()[5].  I
will send it separately after rc-1 once the zram cleanups are merged.

mpage changes were tested with a simple boot testing and running a fio
workload on ext2 filesystem.  orangefs was tested by Mike Marshall (No
code changes since he tested).

This patch (of 3):

Convert orangefs_readahead() from using struct page to struct folio.  This
conversion removes the call to page_endio() which is soon to be removed,
and simplifies the final page handling.

The page error flags is not required to be set in the error case as
orangefs doesn't depend on them.

Link: https://lkml.kernel.org/r/20230411122920.30134-1-p.raghav@samsung.com
Link: https://lkml.kernel.org/r/20230411122920.30134-2-p.raghav@samsung.com
Link: https://lore.kernel.org/linux-mm/ZBHcl8Pz2ULb4RGD@infradead.org/
Link: https://lore.kernel.org/linux-mm/20230322135013.197076-1-p.raghav@samsung.com/
Link: https://lore.kernel.org/linux-mm/8adb0770-6124-e11f-2551-6582db27ed32@samsung.com/
Link: https://lore.kernel.org/linux-block/20230404150536.2142108-1-hch@lst.de/T/#t
Link: https://lore.kernel.org/lkml/20230403132221.94921-6-p.raghav@samsung.com/
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mike Marshall <hubcap@omnibond.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/huge_memory: conditionally call maybe_mkwrite() and drop pte_wrprotect() in __split_huge_pmd_locked()

No need to call maybe_mkwrite() to then wrprotect if the source PMD was not
writable.

It's worth nothing that this now allows for PTEs to be writable even if
the source PMD was not writable: if vma->vm_page_prot includes write
permissions.

As documented in commit 931298e103c2 ("mm/userfaultfd: rely on
vma->vm_page_prot in uffd_wp_range()"), any mechanism that intends to
have pages wrprotected (COW, writenotify, mprotect, uffd-wp, softdirty,
...) has to properly adjust vma->vm_page_prot upfront, to not include
write permissions. If vma->vm_page_prot includes write permissions, the
PTE/PMD can be writable as default.

This now mimics the handling in mm/migrate.c:remove_migration_pte() and in
mm/huge_memory.c:remove_migration_pmd(), which has been in place for a
long time (except that 96a9c287e25d ("mm/migrate: fix wrongly apply write
bit after mkdirty on sparc64") temporarily changed it).

Link: https://lkml.kernel.org/r/20230411142512.438404-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/huge_memory: revert "Partly revert "mm/thp: carry over dirty bit when thp splits on pmd""

This reverts commit 624a2c94f5b7 ("Partly revert "mm/thp: carry over dirty
bit when thp splits on pmd"") and the fixup in commit e833bc503405
("mm/thp: re-apply mkdirty for small pages after split").

Now that sparc64 mkdirty handling is fixed and no longer sets a PTE/PMD
writable that shouldn't be writable, let's revert the temporary fix and
remove the stale comment.

The mkdirty mm selftest still passes with this change on sparc64.

Note that loongarch handling was fixed in commit bf2f34a506e6 ("LoongArch:
Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()")

Link: https://lkml.kernel.org/r/20230411142512.438404-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/migrate: revert "mm/migrate: fix wrongly apply write bit after mkdirty on sparc64"

This reverts commit 96a9c287e25d ("mm/migrate: fix wrongly apply write bit
after mkdirty on sparc64").

Now that sparc64 mkdirty handling is fixed and no longer sets a PTE/PMD
writable that shouldn't be writable, let's revert the temporary fix.

The mkdirty mm selftest still passes with this change on sparc64.

Note that loongarch handling was fixed in commit bf2f34a506e6 ("LoongArch:
Set _PAGE_DIRTY only if _PAGE_WRITE is set in {pmd,pte}_mkdirty()").

Link: https://lkml.kernel.org/r/20230411142512.438404-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

sparc/mm: don't unconditionally set HW writable bit when setting PTE dirty on 64bit

On sparc64, there is no HW modified bit, therefore, SW tracks via a SW bit
if the PTE is dirty via pte_mkdirty().  However, pte_mkdirty() currently
also unconditionally sets the HW writable bit, which is wrong.

pte_mkdirty() is not supposed to make a PTE actually writable, unless the
SW writable bit -- pte_write() -- indicates that the PTE is not
write-protected.  Fortunately, sparc64 also defines a SW writable bit.

For example, this already turned into a problem in the context of THP
splitting as documented in commit 624a2c94f5b7 ("Partly revert "mm/thp:
carry over dirty bit when thp splits on pmd""), and for page migration, as
documented in commit 96a9c287e25d ("mm/migrate: fix wrongly apply write
bit after mkdirty on sparc64").

Also, we might want to use the dirty PTE bit in the context of KSM with
shared zeropage [1], whereby setting the page writable would be
problematic.

But more general, any code that might end up setting a PTE/PMD dirty
inside a VM without write permissions is possibly broken,

Before this commit (sun4u in QEMU):
root@debian:~/linux/tools/testing/selftests/mm# ./mkdirty
# [INFO] detected THP size: 8192 KiB
TAP version 13
1..6
# [INFO] PTRACE write access
not ok 1 SIGSEGV generated, page not modified
# [INFO] PTRACE write access to THP
not ok 2 SIGSEGV generated, page not modified
# [INFO] Page migration
ok 3 SIGSEGV generated, page not modified
# [INFO] Page migration of THP
ok 4 SIGSEGV generated, page not modified
# [INFO] PTE-mapping a THP
ok 5 SIGSEGV generated, page not modified
# [INFO] UFFDIO_COPY
not ok 6 SIGSEGV generated, page not modified
Bail out! 3 out of 6 tests failed
# Totals: pass:3 fail:3 xfail:0 xpass:0 skip:0 error:0

Test #3,#4,#5 pass ever since we added some MM workarounds, the
underlying issue remains.

Let's fix the remaining issues and prepare for reverting the workarounds
by setting the HW writable bit only if both, the SW dirty bit and the SW
writable bit are set.

We have to move pte_dirty() and pte_write() up. The code patching
mechanism and handling constants > 22bit is a bit special on sparc64.

The ASM logic in pte_mkdirty() and pte_mkwrite() match the logic in
pte_mkold() to create the mask depending on the machine type. The ASM
logic in __pte_mkhwwrite() matches the logic in pte_present(), just
using an "or" instead of an "and" instruction.

With this commit (sun4u in QEMU):
root@debian:~/linux/tools/testing/selftests/mm# ./mkdirty
# [INFO] detected THP size: 8192 KiB
TAP version 13
1..6
# [INFO] PTRACE write access
ok 1 SIGSEGV generated, page not modified
# [INFO] PTRACE write access to THP
ok 2 SIGSEGV generated, page not modified
# [INFO] Page migration
ok 3 SIGSEGV generated, page not modified
# [INFO] Page migration of THP
ok 4 SIGSEGV generated, page not modified
# [INFO] PTE-mapping a THP
ok 5 SIGSEGV generated, page not modified
# [INFO] UFFDIO_COPY
ok 6 SIGSEGV generated, page not modified
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0

This handling seems to have been in place forever.

[1] https://lkml.kernel.org/r/533a7c3d-3a48-b16b-b421-6e8386e0b142@redhat.com

Link: https://lkml.kernel.org/r/20230411142512.438404-4-david@redhat.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: mkdirty: test behavior of (pte|pmd)_mkdirty on VMAs without write permissions

Let's add some tests that trigger (pte|pmd)_mkdirty on VMAs without write
permissions.  If an architecture implementation is wrong, we might
accidentally set the PTE/PMD writable and allow for write access in a VMA
without write permissions.

The tests include reproducers for the two issues recently discovered
and worked-around in core-MM for now:

(1) commit 624a2c94f5b7 ("Partly revert "mm/thp: carry over dirty
    bit when thp splits on pmd"")
(2) commit 96a9c287e25d ("mm/migrate: fix wrongly apply write bit
    after mkdirty on sparc64")

In addition, some other tests that reveal further issues.

All tests pass under x86_64:
./mkdirty
# [INFO] detected THP size: 2048 KiB
TAP version 13
1..6
# [INFO] PTRACE write access
ok 1 SIGSEGV generated, page not modified
# [INFO] PTRACE write access to THP
ok 2 SIGSEGV generated, page not modified
# [INFO] Page migration
ok 3 SIGSEGV generated, page not modified
# [INFO] Page migration of THP
ok 4 SIGSEGV generated, page not modified
# [INFO] PTE-mapping a THP
ok 5 SIGSEGV generated, page not modified
# [INFO] UFFDIO_COPY
ok 6 SIGSEGV generated, page not modified
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0

But some fail on sparc64:
./mkdirty
# [INFO] detected THP size: 8192 KiB
TAP version 13
1..6
# [INFO] PTRACE write access
not ok 1 SIGSEGV generated, page not modified
# [INFO] PTRACE write access to THP
not ok 2 SIGSEGV generated, page not modified
# [INFO] Page migration
ok 3 SIGSEGV generated, page not modified
# [INFO] Page migration of THP
ok 4 SIGSEGV generated, page not modified
# [INFO] PTE-mapping a THP
ok 5 SIGSEGV generated, page not modified
# [INFO] UFFDIO_COPY
not ok 6 SIGSEGV generated, page not modified
Bail out! 3 out of 6 tests failed
# Totals: pass:3 fail:3 xfail:0 xpass:0 skip:0 error:0

Reverting both above commits makes all tests fail on sparc64:
./mkdirty
# [INFO] detected THP size: 8192 KiB
TAP version 13
1..6
# [INFO] PTRACE write access
not ok 1 SIGSEGV generated, page not modified
# [INFO] PTRACE write access to THP
not ok 2 SIGSEGV generated, page not modified
# [INFO] Page migration
not ok 3 SIGSEGV generated, page not modified
# [INFO] Page migration of THP
not ok 4 SIGSEGV generated, page not modified
# [INFO] PTE-mapping a THP
not ok 5 SIGSEGV generated, page not modified
# [INFO] UFFDIO_COPY
not ok 6 SIGSEGV generated, page not modified
Bail out! 6 out of 6 tests failed
# Totals: pass:0 fail:6 xfail:0 xpass:0 skip:0 error:0

The tests are useful to detect other problematic archs, to verify new
arch fixes, and to stop such issues from reappearing in the future.

For now, we don't add any hugetlb tests.

Link: https://lkml.kernel.org/r/20230411142512.438404-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selftests/mm: reuse read_pmd_pagesize() in COW selftest

Patch series "mm: (pte|pmd)_mkdirty() should not unconditionally allow for
write access".

This is the follow-up on [1], adding selftests (testing for known issues
we added workarounds for and other issues that haven't been fixed yet),
fixing sparc64, reverting the workarounds, and perform one cleanup.

The patch from [1] was modified slightly (updated/extended patch
description, dropped one unnecessary NOP instruction from the ASM in
__pte_mkhwwrite()).

Retested on x86_64 and sparc64 (sun4u in QEMU).

I scanned most architectures to make sure their (pte|pmd)_mkdirty()
handling is correct.  To be sure, we can run the selftests and find out if
other architectures are still affectes (loongarch was fixed recently as
well).

Based on master for now. I don't expect surprises regarding mm-tress, but
I can rebase if there are any problems.

This patch (of 6):

The COW selftest can deal with THP not being configured.  So move error
handling of read_pmd_pagesize() into the callers such that we can reuse it
in the COW selftest.

Link: https://lkml.kernel.org/r/20230411142512.438404-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221212130213.136267-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230411142512.438404-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: return errors from read_from_bdev_sync

Propagate read errors to the caller instead of dropping them on the floor,
and stop returning the somewhat dangerous 1 on success from
read_from_bdev*.

Link: https://lkml.kernel.org/r/20230411171459.567614-18-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: fix synchronous reads

Currently nothing waits for the synchronous reads before accessing the
data.  Switch them to an on-stack bio and submit_bio_wait to make sure the
I/O has actually completed when the work item has been flushed.  This also
removes the call to page_endio that would unlock a page that has never
been locked.

Drop the partial_io/sync flag, as chaining only makes sense for the
asynchronous reads of the entire page.

Link: https://lkml.kernel.org/r/20230411171459.567614-17-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: don't return errors from read_from_bdev_async

bio_alloc will never return a NULL bio when it is allowed to sleep, and
adding a single page to bio with a single vector also can't fail, so
switch to the asserting __bio_add_page variant and drop the error returns.

Link: https://lkml.kernel.org/r/20230411171459.567614-16-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: pass a page to read_from_bdev

read_from_bdev always reads a whole page, so pass a page to it instead of
the bvec and remove the now pointless zram_bvec_read_from_bdev wrapper.

Link: https://lkml.kernel.org/r/20230411171459.567614-15-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: refactor zram_bdev_write

Split the read/modify/write case into a separate helper.

Link: https://lkml.kernel.org/r/20230411171459.567614-14-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: don't pass a bvec to __zram_bvec_write

__zram_bvec_write only extracts the page from __zram_bvec_write and always
expects a full page of input.  Pass the page directly instead of the bvec
and rename the function to zram_write_page.

Link: https://lkml.kernel.org/r/20230411171459.567614-13-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: refactor zram_bdev_read

Split the partial read into a separate helper.

Link: https://lkml.kernel.org/r/20230411171459.567614-12-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: directly call zram_read_page in writeback_store

writeback_store always reads a full page, so just call zram_read_page
directly and bypass the boune buffer handling.

Link: https://lkml.kernel.org/r/20230411171459.567614-11-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: rename __zram_bvec_read to zram_read_page

__zram_bvec_read doesn't get passed a bvec, but always read a whole page.
Rename it to make the usage more clear.

Link: https://lkml.kernel.org/r/20230411171459.567614-10-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: don't use highmem for the bounce buffer in zram_bvec_{read,write}

There is no point in allocation a highmem page when we instantly need to
copy from it.

Link: https://lkml.kernel.org/r/20230411171459.567614-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: refactor highlevel read and write handling

Instead of having an outer loop in __zram_make_request and then branch out
for reads vs writes for each loop iteration in zram_bvec_rw, split the
main handler into separat zram_bio_read and zram_bio_write handlers that
also include the functionality formerly in zram_bvec_rw.

Link: https://lkml.kernel.org/r/20230411171459.567614-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: return early on error in zram_bvec_rw

When the low-level access fails, don't clear the idle flag or clear the
caches, and just return.

Link: https://lkml.kernel.org/r/20230411171459.567614-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: move discard handling to zram_submit_bio

Switch on the bio operation in zram_submit_bio and only call into
__zram_make_request for read and write operations.

Link: https://lkml.kernel.org/r/20230411171459.567614-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: simplify bvec iteration in __zram_make_request

bio_for_each_segment synthetize bvecs that never cross page boundaries, so
don't duplicate that work in an inner loop.

Link: https://lkml.kernel.org/r/20230411171459.567614-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

zram: make zram_bio_discard more self-contained

Derive the index and offset variables inside the function, and complete
the bio directly in preparation for cleaning up the I/O path.

Link: https://lkml.kernel.org/r/20230411171459.567614-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>